i8253.c 3.1 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132
  1. /*
  2. * i8253.c 8253/PIT functions
  3. *
  4. */
  5. #include <linux/clockchips.h>
  6. #include <linux/i8253.h>
  7. #include <linux/init.h>
  8. #include <linux/interrupt.h>
  9. #include <linux/jiffies.h>
  10. #include <linux/module.h>
  11. #include <linux/smp.h>
  12. #include <linux/spinlock.h>
  13. #include <linux/irq.h>
  14. #include <asm/delay.h>
  15. #include <asm/io.h>
  16. #include <asm/time.h>
  17. /*
  18. * Initialize the PIT timer.
  19. *
  20. * This is also called after resume to bring the PIT into operation again.
  21. */
  22. static void init_pit_timer(enum clock_event_mode mode,
  23. struct clock_event_device *evt)
  24. {
  25. raw_spin_lock(&i8253_lock);
  26. switch(mode) {
  27. case CLOCK_EVT_MODE_PERIODIC:
  28. /* binary, mode 2, LSB/MSB, ch 0 */
  29. outb_p(0x34, PIT_MODE);
  30. outb_p(LATCH & 0xff , PIT_CH0); /* LSB */
  31. outb(LATCH >> 8 , PIT_CH0); /* MSB */
  32. break;
  33. case CLOCK_EVT_MODE_SHUTDOWN:
  34. case CLOCK_EVT_MODE_UNUSED:
  35. if (evt->mode == CLOCK_EVT_MODE_PERIODIC ||
  36. evt->mode == CLOCK_EVT_MODE_ONESHOT) {
  37. outb_p(0x30, PIT_MODE);
  38. outb_p(0, PIT_CH0);
  39. outb_p(0, PIT_CH0);
  40. }
  41. break;
  42. case CLOCK_EVT_MODE_ONESHOT:
  43. /* One shot setup */
  44. outb_p(0x38, PIT_MODE);
  45. break;
  46. case CLOCK_EVT_MODE_RESUME:
  47. /* Nothing to do here */
  48. break;
  49. }
  50. raw_spin_unlock(&i8253_lock);
  51. }
  52. /*
  53. * Program the next event in oneshot mode
  54. *
  55. * Delta is given in PIT ticks
  56. */
  57. static int pit_next_event(unsigned long delta, struct clock_event_device *evt)
  58. {
  59. raw_spin_lock(&i8253_lock);
  60. outb_p(delta & 0xff , PIT_CH0); /* LSB */
  61. outb(delta >> 8 , PIT_CH0); /* MSB */
  62. raw_spin_unlock(&i8253_lock);
  63. return 0;
  64. }
  65. /*
  66. * On UP the PIT can serve all of the possible timer functions. On SMP systems
  67. * it can be solely used for the global tick.
  68. *
  69. * The profiling and update capabilites are switched off once the local apic is
  70. * registered. This mechanism replaces the previous #ifdef LOCAL_APIC -
  71. * !using_apic_timer decisions in do_timer_interrupt_hook()
  72. */
  73. static struct clock_event_device pit_clockevent = {
  74. .name = "pit",
  75. .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
  76. .set_mode = init_pit_timer,
  77. .set_next_event = pit_next_event,
  78. .irq = 0,
  79. };
  80. static irqreturn_t timer_interrupt(int irq, void *dev_id)
  81. {
  82. pit_clockevent.event_handler(&pit_clockevent);
  83. return IRQ_HANDLED;
  84. }
  85. static struct irqaction irq0 = {
  86. .handler = timer_interrupt,
  87. .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER,
  88. .name = "timer"
  89. };
  90. /*
  91. * Initialize the conversion factor and the min/max deltas of the clock event
  92. * structure and register the clock event source with the framework.
  93. */
  94. void __init setup_pit_timer(void)
  95. {
  96. struct clock_event_device *cd = &pit_clockevent;
  97. unsigned int cpu = smp_processor_id();
  98. /*
  99. * Start pit with the boot cpu mask and make it global after the
  100. * IO_APIC has been initialized.
  101. */
  102. cd->cpumask = cpumask_of(cpu);
  103. clockevent_set_clock(cd, CLOCK_TICK_RATE);
  104. cd->max_delta_ns = clockevent_delta2ns(0x7FFF, cd);
  105. cd->min_delta_ns = clockevent_delta2ns(0xF, cd);
  106. clockevents_register_device(cd);
  107. setup_irq(0, &irq0);
  108. }
  109. static int __init init_pit_clocksource(void)
  110. {
  111. if (num_possible_cpus() > 1) /* PIT does not scale! */
  112. return 0;
  113. return clocksource_i8253_init();
  114. }
  115. arch_initcall(init_pit_clocksource);