sleep.c 4.8 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178
  1. /*
  2. * sleep.c - x86-specific ACPI sleep support.
  3. *
  4. * Copyright (C) 2001-2003 Patrick Mochel
  5. * Copyright (C) 2001-2003 Pavel Machek <pavel@ucw.cz>
  6. */
  7. #include <linux/acpi.h>
  8. #include <linux/bootmem.h>
  9. #include <linux/memblock.h>
  10. #include <linux/dmi.h>
  11. #include <linux/cpumask.h>
  12. #include <asm/segment.h>
  13. #include <asm/desc.h>
  14. #include "realmode/wakeup.h"
  15. #include "sleep.h"
  16. unsigned long acpi_wakeup_address;
  17. unsigned long acpi_realmode_flags;
  18. /* address in low memory of the wakeup routine. */
  19. static unsigned long acpi_realmode;
  20. #if defined(CONFIG_SMP) && defined(CONFIG_64BIT)
  21. static char temp_stack[4096];
  22. #endif
  23. /**
  24. * acpi_save_state_mem - save kernel state
  25. *
  26. * Create an identity mapped page table and copy the wakeup routine to
  27. * low memory.
  28. *
  29. * Note that this is too late to change acpi_wakeup_address.
  30. */
  31. int acpi_save_state_mem(void)
  32. {
  33. struct wakeup_header *header;
  34. if (!acpi_realmode) {
  35. printk(KERN_ERR "Could not allocate memory during boot, "
  36. "S3 disabled\n");
  37. return -ENOMEM;
  38. }
  39. memcpy((void *)acpi_realmode, &wakeup_code_start, WAKEUP_SIZE);
  40. header = (struct wakeup_header *)(acpi_realmode + HEADER_OFFSET);
  41. if (header->signature != 0x51ee1111) {
  42. printk(KERN_ERR "wakeup header does not match\n");
  43. return -EINVAL;
  44. }
  45. header->video_mode = saved_video_mode;
  46. header->wakeup_jmp_seg = acpi_wakeup_address >> 4;
  47. /*
  48. * Set up the wakeup GDT. We set these up as Big Real Mode,
  49. * that is, with limits set to 4 GB. At least the Lenovo
  50. * Thinkpad X61 is known to need this for the video BIOS
  51. * initialization quirk to work; this is likely to also
  52. * be the case for other laptops or integrated video devices.
  53. */
  54. /* GDT[0]: GDT self-pointer */
  55. header->wakeup_gdt[0] =
  56. (u64)(sizeof(header->wakeup_gdt) - 1) +
  57. ((u64)(acpi_wakeup_address +
  58. ((char *)&header->wakeup_gdt - (char *)acpi_realmode))
  59. << 16);
  60. /* GDT[1]: big real mode-like code segment */
  61. header->wakeup_gdt[1] =
  62. GDT_ENTRY(0x809b, acpi_wakeup_address, 0xfffff);
  63. /* GDT[2]: big real mode-like data segment */
  64. header->wakeup_gdt[2] =
  65. GDT_ENTRY(0x8093, acpi_wakeup_address, 0xfffff);
  66. #ifndef CONFIG_64BIT
  67. store_gdt((struct desc_ptr *)&header->pmode_gdt);
  68. if (rdmsr_safe(MSR_EFER, &header->pmode_efer_low,
  69. &header->pmode_efer_high))
  70. header->pmode_efer_low = header->pmode_efer_high = 0;
  71. #endif /* !CONFIG_64BIT */
  72. header->pmode_cr0 = read_cr0();
  73. header->pmode_cr4 = read_cr4_safe();
  74. header->realmode_flags = acpi_realmode_flags;
  75. header->real_magic = 0x12345678;
  76. #ifndef CONFIG_64BIT
  77. header->pmode_entry = (u32)&wakeup_pmode_return;
  78. header->pmode_cr3 = (u32)(swsusp_pg_dir - __PAGE_OFFSET);
  79. saved_magic = 0x12345678;
  80. #else /* CONFIG_64BIT */
  81. header->trampoline_segment = setup_trampoline() >> 4;
  82. #ifdef CONFIG_SMP
  83. stack_start.sp = temp_stack + sizeof(temp_stack);
  84. early_gdt_descr.address =
  85. (unsigned long)get_cpu_gdt_table(smp_processor_id());
  86. initial_gs = per_cpu_offset(smp_processor_id());
  87. #endif
  88. initial_code = (unsigned long)wakeup_long64;
  89. saved_magic = 0x123456789abcdef0L;
  90. #endif /* CONFIG_64BIT */
  91. return 0;
  92. }
  93. /*
  94. * acpi_restore_state - undo effects of acpi_save_state_mem
  95. */
  96. void acpi_restore_state_mem(void)
  97. {
  98. }
  99. /**
  100. * acpi_reserve_wakeup_memory - do _very_ early ACPI initialisation
  101. *
  102. * We allocate a page from the first 1MB of memory for the wakeup
  103. * routine for when we come back from a sleep state. The
  104. * runtime allocator allows specification of <16MB pages, but not
  105. * <1MB pages.
  106. */
  107. void __init acpi_reserve_wakeup_memory(void)
  108. {
  109. phys_addr_t mem;
  110. if ((&wakeup_code_end - &wakeup_code_start) > WAKEUP_SIZE) {
  111. printk(KERN_ERR
  112. "ACPI: Wakeup code way too big, S3 disabled.\n");
  113. return;
  114. }
  115. mem = memblock_find_in_range(0, 1<<20, WAKEUP_SIZE, PAGE_SIZE);
  116. if (mem == MEMBLOCK_ERROR) {
  117. printk(KERN_ERR "ACPI: Cannot allocate lowmem, S3 disabled.\n");
  118. return;
  119. }
  120. acpi_realmode = (unsigned long) phys_to_virt(mem);
  121. acpi_wakeup_address = mem;
  122. memblock_x86_reserve_range(mem, mem + WAKEUP_SIZE, "ACPI WAKEUP");
  123. }
  124. static int __init acpi_sleep_setup(char *str)
  125. {
  126. while ((str != NULL) && (*str != '\0')) {
  127. if (strncmp(str, "s3_bios", 7) == 0)
  128. acpi_realmode_flags |= 1;
  129. if (strncmp(str, "s3_mode", 7) == 0)
  130. acpi_realmode_flags |= 2;
  131. if (strncmp(str, "s3_beep", 7) == 0)
  132. acpi_realmode_flags |= 4;
  133. #ifdef CONFIG_HIBERNATION
  134. if (strncmp(str, "s4_nohwsig", 10) == 0)
  135. acpi_no_s4_hw_signature();
  136. if (strncmp(str, "s4_nonvs", 8) == 0) {
  137. pr_warning("ACPI: acpi_sleep=s4_nonvs is deprecated, "
  138. "please use acpi_sleep=nonvs instead");
  139. acpi_nvs_nosave();
  140. }
  141. #endif
  142. if (strncmp(str, "nonvs", 5) == 0)
  143. acpi_nvs_nosave();
  144. if (strncmp(str, "old_ordering", 12) == 0)
  145. acpi_old_suspend_ordering();
  146. str = strchr(str, ',');
  147. if (str != NULL)
  148. str += strspn(str, ", \t");
  149. }
  150. return 1;
  151. }
  152. __setup("acpi_sleep=", acpi_sleep_setup);