Kconfig 9.6 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337
  1. #
  2. # Multifunction miscellaneous devices
  3. #
  4. menu "Multifunction device drivers"
  5. depends on HAS_IOMEM
  6. config MFD_CORE
  7. tristate
  8. default n
  9. config MFD_SM501
  10. tristate "Support for Silicon Motion SM501"
  11. ---help---
  12. This is the core driver for the Silicon Motion SM501 multimedia
  13. companion chip. This device is a multifunction device which may
  14. provide numerous interfaces including USB host controller, USB gadget,
  15. asynchronous serial ports, audio functions, and a dual display video
  16. interface. The device may be connected by PCI or local bus with
  17. varying functions enabled.
  18. config MFD_SM501_GPIO
  19. bool "Export GPIO via GPIO layer"
  20. depends on MFD_SM501 && GPIOLIB
  21. ---help---
  22. This option uses the gpio library layer to export the 64 GPIO
  23. lines on the SM501. The platform data is used to supply the
  24. base number for the first GPIO line to register.
  25. config MFD_ASIC3
  26. bool "Support for Compaq ASIC3"
  27. depends on GENERIC_HARDIRQS && GPIOLIB && ARM
  28. select MFD_CORE
  29. ---help---
  30. This driver supports the ASIC3 multifunction chip found on many
  31. PDAs (mainly iPAQ and HTC based ones)
  32. config MFD_DM355EVM_MSP
  33. bool "DaVinci DM355 EVM microcontroller"
  34. depends on I2C && MACH_DAVINCI_DM355_EVM
  35. help
  36. This driver supports the MSP430 microcontroller used on these
  37. boards. MSP430 firmware manages resets and power sequencing,
  38. inputs from buttons and the IR remote, LEDs, an RTC, and more.
  39. config HTC_EGPIO
  40. bool "HTC EGPIO support"
  41. depends on GENERIC_HARDIRQS && GPIOLIB && ARM
  42. help
  43. This driver supports the CPLD egpio chip present on
  44. several HTC phones. It provides basic support for input
  45. pins, output pins, and irqs.
  46. config HTC_PASIC3
  47. tristate "HTC PASIC3 LED/DS1WM chip support"
  48. select MFD_CORE
  49. help
  50. This core driver provides register access for the LED/DS1WM
  51. chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
  52. HTC Magician devices, respectively. Actual functionality is
  53. handled by the leds-pasic3 and ds1wm drivers.
  54. config UCB1400_CORE
  55. tristate "Philips UCB1400 Core driver"
  56. depends on AC97_BUS
  57. depends on GPIOLIB
  58. help
  59. This enables support for the Philips UCB1400 core functions.
  60. The UCB1400 is an AC97 audio codec.
  61. To compile this driver as a module, choose M here: the
  62. module will be called ucb1400_core.
  63. config TPS65010
  64. tristate "TPS6501x Power Management chips"
  65. depends on I2C && GPIOLIB
  66. default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
  67. help
  68. If you say yes here you get support for the TPS6501x series of
  69. Power Management chips. These include voltage regulators,
  70. lithium ion/polymer battery charging, and other features that
  71. are often used in portable devices like cell phones and cameras.
  72. This driver can also be built as a module. If so, the module
  73. will be called tps65010.
  74. config MENELAUS
  75. bool "Texas Instruments TWL92330/Menelaus PM chip"
  76. depends on I2C=y && ARCH_OMAP24XX
  77. help
  78. If you say yes here you get support for the Texas Instruments
  79. TWL92330/Menelaus Power Management chip. This include voltage
  80. regulators, Dual slot memory card transceivers, real-time clock
  81. and other features that are often used in portable devices like
  82. cell phones and PDAs.
  83. config TWL4030_CORE
  84. bool "Texas Instruments TWL4030/TPS659x0 Support"
  85. depends on I2C=y && GENERIC_HARDIRQS
  86. help
  87. Say yes here if you have TWL4030 family chip on your board.
  88. This core driver provides register access and IRQ handling
  89. facilities, and registers devices for the various functions
  90. so that function-specific drivers can bind to them.
  91. These multi-function chips are found on many OMAP2 and OMAP3
  92. boards, providing power management, RTC, GPIO, keypad, a
  93. high speed USB OTG transceiver, an audio codec (on most
  94. versions) and many other features.
  95. config TWL4030_POWER
  96. bool "Support power resources on TWL4030 family chips"
  97. depends on TWL4030_CORE && ARM
  98. help
  99. Say yes here if you want to use the power resources on the
  100. TWL4030 family chips. Most of these resources are regulators,
  101. which have a separate driver; some are control signals, such
  102. as clock request handshaking.
  103. This driver uses board-specific data to initialize the resources
  104. and load scripts controling which resources are switched off/on
  105. or reset when a sleep, wakeup or warm reset event occurs.
  106. config TWL4030_CODEC
  107. bool
  108. depends on TWL4030_CORE
  109. select MFD_CORE
  110. default n
  111. config MFD_TMIO
  112. bool
  113. default n
  114. config MFD_T7L66XB
  115. bool "Support Toshiba T7L66XB"
  116. depends on ARM && HAVE_CLK
  117. select MFD_CORE
  118. select MFD_TMIO
  119. help
  120. Support for Toshiba Mobile IO Controller T7L66XB
  121. config MFD_TC6387XB
  122. bool "Support Toshiba TC6387XB"
  123. depends on ARM && HAVE_CLK
  124. select MFD_CORE
  125. select MFD_TMIO
  126. help
  127. Support for Toshiba Mobile IO Controller TC6387XB
  128. config MFD_TC6393XB
  129. bool "Support Toshiba TC6393XB"
  130. depends on GPIOLIB && ARM
  131. select MFD_CORE
  132. select MFD_TMIO
  133. help
  134. Support for Toshiba Mobile IO Controller TC6393XB
  135. config PMIC_DA903X
  136. bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
  137. depends on I2C=y
  138. help
  139. Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
  140. ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
  141. usually found on PXA processors-based platforms. This includes
  142. the I2C driver and the core APIs _only_, you have to select
  143. individual components like LCD backlight, voltage regulators,
  144. LEDs and battery-charger under the corresponding menus.
  145. config MFD_WM8400
  146. tristate "Support Wolfson Microelectronics WM8400"
  147. select MFD_CORE
  148. depends on I2C
  149. help
  150. Support for the Wolfson Microelecronics WM8400 PMIC and audio
  151. CODEC. This driver provides common support for accessing
  152. the device, additional drivers must be enabled in order to use
  153. the functionality of the device.
  154. config MFD_WM831X
  155. tristate "Support Wolfson Microelectronics WM831x PMICs"
  156. select MFD_CORE
  157. depends on I2C
  158. help
  159. Support for the Wolfson Microelecronics WM831x PMICs. This
  160. driver provides common support for accessing the device,
  161. additional drivers must be enabled in order to use the
  162. functionality of the device.
  163. config MFD_WM8350
  164. tristate
  165. config MFD_WM8350_CONFIG_MODE_0
  166. bool
  167. depends on MFD_WM8350
  168. config MFD_WM8350_CONFIG_MODE_1
  169. bool
  170. depends on MFD_WM8350
  171. config MFD_WM8350_CONFIG_MODE_2
  172. bool
  173. depends on MFD_WM8350
  174. config MFD_WM8350_CONFIG_MODE_3
  175. bool
  176. depends on MFD_WM8350
  177. config MFD_WM8351_CONFIG_MODE_0
  178. bool
  179. depends on MFD_WM8350
  180. config MFD_WM8351_CONFIG_MODE_1
  181. bool
  182. depends on MFD_WM8350
  183. config MFD_WM8351_CONFIG_MODE_2
  184. bool
  185. depends on MFD_WM8350
  186. config MFD_WM8351_CONFIG_MODE_3
  187. bool
  188. depends on MFD_WM8350
  189. config MFD_WM8352_CONFIG_MODE_0
  190. bool
  191. depends on MFD_WM8350
  192. config MFD_WM8352_CONFIG_MODE_1
  193. bool
  194. depends on MFD_WM8350
  195. config MFD_WM8352_CONFIG_MODE_2
  196. bool
  197. depends on MFD_WM8350
  198. config MFD_WM8352_CONFIG_MODE_3
  199. bool
  200. depends on MFD_WM8350
  201. config MFD_WM8350_I2C
  202. tristate "Support Wolfson Microelectronics WM8350 with I2C"
  203. select MFD_WM8350
  204. depends on I2C
  205. help
  206. The WM8350 is an integrated audio and power management
  207. subsystem with watchdog and RTC functionality for embedded
  208. systems. This option enables core support for the WM8350 with
  209. I2C as the control interface. Additional options must be
  210. selected to enable support for the functionality of the chip.
  211. config MFD_PCF50633
  212. tristate "Support for NXP PCF50633"
  213. depends on I2C
  214. help
  215. Say yes here if you have NXP PCF50633 chip on your board.
  216. This core driver provides register access and IRQ handling
  217. facilities, and registers devices for the various functions
  218. so that function-specific drivers can bind to them.
  219. config MFD_MC13783
  220. tristate "Support Freescale MC13783"
  221. depends on SPI_MASTER
  222. select MFD_CORE
  223. help
  224. Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC.
  225. This driver provides common support for accessing the device,
  226. additional drivers must be enabled in order to use the
  227. functionality of the device.
  228. config PCF50633_ADC
  229. tristate "Support for NXP PCF50633 ADC"
  230. depends on MFD_PCF50633
  231. help
  232. Say yes here if you want to include support for ADC in the
  233. NXP PCF50633 chip.
  234. config PCF50633_GPIO
  235. tristate "Support for NXP PCF50633 GPIO"
  236. depends on MFD_PCF50633
  237. help
  238. Say yes here if you want to include support GPIO for pins on
  239. the PCF50633 chip.
  240. config AB3100_CORE
  241. tristate "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
  242. depends on I2C
  243. default y if ARCH_U300
  244. help
  245. Select this to enable the AB3100 Mixed Signal IC core
  246. functionality. This connects to a AB3100 on the I2C bus
  247. and expose a number of symbols needed for dependent devices
  248. to read and write registers and subscribe to events from
  249. this multi-functional IC. This is needed to use other features
  250. of the AB3100 such as battery-backed RTC, charging control,
  251. LEDs, vibrator, system power and temperature, power management
  252. and ALSA sound.
  253. config AB3100_OTP
  254. tristate "ST-Ericsson AB3100 OTP functions"
  255. depends on AB3100_CORE
  256. default y if AB3100_CORE
  257. help
  258. Select this to enable the AB3100 Mixed Signal IC OTP (one-time
  259. programmable memory) support. This exposes a sysfs file to read
  260. out OTP values.
  261. config EZX_PCAP
  262. bool "PCAP Support"
  263. depends on GENERIC_HARDIRQS && SPI_MASTER
  264. help
  265. This enables the PCAP ASIC present on EZX Phones. This is
  266. needed for MMC, TouchScreen, Sound, USB, etc..
  267. endmenu
  268. menu "Multimedia Capabilities Port drivers"
  269. depends on ARCH_SA1100
  270. config MCP
  271. tristate
  272. # Interface drivers
  273. config MCP_SA11X0
  274. tristate "Support SA11x0 MCP interface"
  275. depends on ARCH_SA1100
  276. select MCP
  277. # Chip drivers
  278. config MCP_UCB1200
  279. tristate "Support for UCB1200 / UCB1300"
  280. depends on MCP
  281. config MCP_UCB1200_TS
  282. tristate "Touchscreen interface support"
  283. depends on MCP_UCB1200 && INPUT
  284. endmenu