Kconfig 2.6 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116
  1. config SND_SOC_ALL_CODECS
  2. tristate "Build all ASoC CODEC drivers"
  3. select SND_SOC_AC97_CODEC if SND_SOC_AC97_BUS
  4. select SND_SOC_AD1980 if SND_SOC_AC97_BUS
  5. select SND_SOC_AD73311 if I2C
  6. select SND_SOC_AK4535 if I2C
  7. select SND_SOC_CS4270 if I2C
  8. select SND_SOC_SSM2602 if I2C
  9. select SND_SOC_TLV320AIC23 if I2C
  10. select SND_SOC_TLV320AIC26 if SPI_MASTER
  11. select SND_SOC_TLV320AIC3X if I2C
  12. select SND_SOC_UDA1380 if I2C
  13. select SND_SOC_WM8510 if (I2C || SPI_MASTER)
  14. select SND_SOC_WM8580 if I2C
  15. select SND_SOC_WM8731 if (I2C || SPI_MASTER)
  16. select SND_SOC_WM8750 if (I2C || SPI_MASTER)
  17. select SND_SOC_WM8753 if (I2C || SPI_MASTER)
  18. select SND_SOC_WM8900 if I2C
  19. select SND_SOC_WM8903 if I2C
  20. select SND_SOC_WM8971 if I2C
  21. select SND_SOC_WM8990 if I2C
  22. select SND_SOC_WM9712 if SND_SOC_AC97_BUS
  23. select SND_SOC_WM9713 if SND_SOC_AC97_BUS
  24. help
  25. Normally ASoC codec drivers are only built if a machine driver which
  26. uses them is also built since they are only usable with a machine
  27. driver. Selecting this option will allow these drivers to be built
  28. without an explicit machine driver for test and development purposes.
  29. Support for the bus types used to access the codecs to be built must
  30. be selected separately.
  31. If unsure select "N".
  32. config SND_SOC_AC97_CODEC
  33. tristate
  34. select SND_AC97_CODEC
  35. config SND_SOC_AD1980
  36. tristate
  37. config SND_SOC_AD73311
  38. tristate
  39. config SND_SOC_AK4535
  40. tristate
  41. # Cirrus Logic CS4270 Codec
  42. config SND_SOC_CS4270
  43. tristate
  44. # Cirrus Logic CS4270 Codec Hardware Mute Support
  45. # Select if you have external muting circuitry attached to your CS4270.
  46. config SND_SOC_CS4270_HWMUTE
  47. bool
  48. depends on SND_SOC_CS4270
  49. # Cirrus Logic CS4270 Codec VD = 3.3V Errata
  50. # Select if you are affected by the errata where the part will not function
  51. # if MCLK divide-by-1.5 is selected and VD is set to 3.3V. The driver will
  52. # not select any sample rates that require MCLK to be divided by 1.5.
  53. config SND_SOC_CS4270_VD33_ERRATA
  54. bool
  55. depends on SND_SOC_CS4270
  56. config SND_SOC_SSM2602
  57. tristate
  58. config SND_SOC_TLV320AIC23
  59. tristate
  60. depends on I2C
  61. config SND_SOC_TLV320AIC26
  62. tristate "TI TLV320AIC26 Codec support" if SND_SOC_OF_SIMPLE
  63. depends on SPI
  64. config SND_SOC_TLV320AIC3X
  65. tristate
  66. depends on I2C
  67. config SND_SOC_UDA1380
  68. tristate
  69. config SND_SOC_WM8510
  70. tristate
  71. config SND_SOC_WM8580
  72. tristate
  73. config SND_SOC_WM8731
  74. tristate
  75. config SND_SOC_WM8750
  76. tristate
  77. config SND_SOC_WM8753
  78. tristate
  79. config SND_SOC_WM8900
  80. tristate
  81. config SND_SOC_WM8903
  82. tristate
  83. config SND_SOC_WM8971
  84. tristate
  85. config SND_SOC_WM8990
  86. tristate
  87. config SND_SOC_WM9712
  88. tristate
  89. config SND_SOC_WM9713
  90. tristate