quirks.c 26 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878
  1. /*
  2. * This program is free software; you can redistribute it and/or modify
  3. * it under the terms of the GNU General Public License as published by
  4. * the Free Software Foundation; either version 2 of the License, or
  5. * (at your option) any later version.
  6. *
  7. * This program is distributed in the hope that it will be useful,
  8. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  9. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  10. * GNU General Public License for more details.
  11. *
  12. * You should have received a copy of the GNU General Public License
  13. * along with this program; if not, write to the Free Software
  14. * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  15. */
  16. #include <linux/init.h>
  17. #include <linux/slab.h>
  18. #include <linux/usb.h>
  19. #include <linux/usb/audio.h>
  20. #include <sound/control.h>
  21. #include <sound/core.h>
  22. #include <sound/info.h>
  23. #include <sound/pcm.h>
  24. #include "usbaudio.h"
  25. #include "card.h"
  26. #include "mixer.h"
  27. #include "mixer_quirks.h"
  28. #include "midi.h"
  29. #include "quirks.h"
  30. #include "helper.h"
  31. #include "endpoint.h"
  32. #include "pcm.h"
  33. #include "clock.h"
  34. #include "stream.h"
  35. /*
  36. * handle the quirks for the contained interfaces
  37. */
  38. static int create_composite_quirk(struct snd_usb_audio *chip,
  39. struct usb_interface *iface,
  40. struct usb_driver *driver,
  41. const struct snd_usb_audio_quirk *quirk)
  42. {
  43. int probed_ifnum = get_iface_desc(iface->altsetting)->bInterfaceNumber;
  44. int err;
  45. for (quirk = quirk->data; quirk->ifnum >= 0; ++quirk) {
  46. iface = usb_ifnum_to_if(chip->dev, quirk->ifnum);
  47. if (!iface)
  48. continue;
  49. if (quirk->ifnum != probed_ifnum &&
  50. usb_interface_claimed(iface))
  51. continue;
  52. err = snd_usb_create_quirk(chip, iface, driver, quirk);
  53. if (err < 0)
  54. return err;
  55. if (quirk->ifnum != probed_ifnum)
  56. usb_driver_claim_interface(driver, iface, (void *)-1L);
  57. }
  58. return 0;
  59. }
  60. static int ignore_interface_quirk(struct snd_usb_audio *chip,
  61. struct usb_interface *iface,
  62. struct usb_driver *driver,
  63. const struct snd_usb_audio_quirk *quirk)
  64. {
  65. return 0;
  66. }
  67. /*
  68. * Allow alignment on audio sub-slot (channel samples) rather than
  69. * on audio slots (audio frames)
  70. */
  71. static int create_align_transfer_quirk(struct snd_usb_audio *chip,
  72. struct usb_interface *iface,
  73. struct usb_driver *driver,
  74. const struct snd_usb_audio_quirk *quirk)
  75. {
  76. chip->txfr_quirk = 1;
  77. return 1; /* Continue with creating streams and mixer */
  78. }
  79. static int create_any_midi_quirk(struct snd_usb_audio *chip,
  80. struct usb_interface *intf,
  81. struct usb_driver *driver,
  82. const struct snd_usb_audio_quirk *quirk)
  83. {
  84. return snd_usbmidi_create(chip->card, intf, &chip->midi_list, quirk);
  85. }
  86. /*
  87. * create a stream for an interface with proper descriptors
  88. */
  89. static int create_standard_audio_quirk(struct snd_usb_audio *chip,
  90. struct usb_interface *iface,
  91. struct usb_driver *driver,
  92. const struct snd_usb_audio_quirk *quirk)
  93. {
  94. struct usb_host_interface *alts;
  95. struct usb_interface_descriptor *altsd;
  96. int err;
  97. alts = &iface->altsetting[0];
  98. altsd = get_iface_desc(alts);
  99. err = snd_usb_parse_audio_interface(chip, altsd->bInterfaceNumber);
  100. if (err < 0) {
  101. snd_printk(KERN_ERR "cannot setup if %d: error %d\n",
  102. altsd->bInterfaceNumber, err);
  103. return err;
  104. }
  105. /* reset the current interface */
  106. usb_set_interface(chip->dev, altsd->bInterfaceNumber, 0);
  107. return 0;
  108. }
  109. /*
  110. * create a stream for an endpoint/altsetting without proper descriptors
  111. */
  112. static int create_fixed_stream_quirk(struct snd_usb_audio *chip,
  113. struct usb_interface *iface,
  114. struct usb_driver *driver,
  115. const struct snd_usb_audio_quirk *quirk)
  116. {
  117. struct audioformat *fp;
  118. struct usb_host_interface *alts;
  119. int stream, err;
  120. unsigned *rate_table = NULL;
  121. fp = kmemdup(quirk->data, sizeof(*fp), GFP_KERNEL);
  122. if (!fp) {
  123. snd_printk(KERN_ERR "cannot memdup\n");
  124. return -ENOMEM;
  125. }
  126. if (fp->nr_rates > MAX_NR_RATES) {
  127. kfree(fp);
  128. return -EINVAL;
  129. }
  130. if (fp->nr_rates > 0) {
  131. rate_table = kmemdup(fp->rate_table,
  132. sizeof(int) * fp->nr_rates, GFP_KERNEL);
  133. if (!rate_table) {
  134. kfree(fp);
  135. return -ENOMEM;
  136. }
  137. fp->rate_table = rate_table;
  138. }
  139. stream = (fp->endpoint & USB_DIR_IN)
  140. ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
  141. err = snd_usb_add_audio_stream(chip, stream, fp);
  142. if (err < 0) {
  143. kfree(fp);
  144. kfree(rate_table);
  145. return err;
  146. }
  147. if (fp->iface != get_iface_desc(&iface->altsetting[0])->bInterfaceNumber ||
  148. fp->altset_idx >= iface->num_altsetting) {
  149. kfree(fp);
  150. kfree(rate_table);
  151. return -EINVAL;
  152. }
  153. alts = &iface->altsetting[fp->altset_idx];
  154. fp->datainterval = snd_usb_parse_datainterval(chip, alts);
  155. fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
  156. usb_set_interface(chip->dev, fp->iface, 0);
  157. snd_usb_init_pitch(chip, fp->iface, alts, fp);
  158. snd_usb_init_sample_rate(chip, fp->iface, alts, fp, fp->rate_max);
  159. return 0;
  160. }
  161. /*
  162. * Create a stream for an Edirol UA-700/UA-25/UA-4FX interface.
  163. * The only way to detect the sample rate is by looking at wMaxPacketSize.
  164. */
  165. static int create_uaxx_quirk(struct snd_usb_audio *chip,
  166. struct usb_interface *iface,
  167. struct usb_driver *driver,
  168. const struct snd_usb_audio_quirk *quirk)
  169. {
  170. static const struct audioformat ua_format = {
  171. .formats = SNDRV_PCM_FMTBIT_S24_3LE,
  172. .channels = 2,
  173. .fmt_type = UAC_FORMAT_TYPE_I,
  174. .altsetting = 1,
  175. .altset_idx = 1,
  176. .rates = SNDRV_PCM_RATE_CONTINUOUS,
  177. };
  178. struct usb_host_interface *alts;
  179. struct usb_interface_descriptor *altsd;
  180. struct audioformat *fp;
  181. int stream, err;
  182. /* both PCM and MIDI interfaces have 2 or more altsettings */
  183. if (iface->num_altsetting < 2)
  184. return -ENXIO;
  185. alts = &iface->altsetting[1];
  186. altsd = get_iface_desc(alts);
  187. if (altsd->bNumEndpoints == 2) {
  188. static const struct snd_usb_midi_endpoint_info ua700_ep = {
  189. .out_cables = 0x0003,
  190. .in_cables = 0x0003
  191. };
  192. static const struct snd_usb_audio_quirk ua700_quirk = {
  193. .type = QUIRK_MIDI_FIXED_ENDPOINT,
  194. .data = &ua700_ep
  195. };
  196. static const struct snd_usb_midi_endpoint_info uaxx_ep = {
  197. .out_cables = 0x0001,
  198. .in_cables = 0x0001
  199. };
  200. static const struct snd_usb_audio_quirk uaxx_quirk = {
  201. .type = QUIRK_MIDI_FIXED_ENDPOINT,
  202. .data = &uaxx_ep
  203. };
  204. const struct snd_usb_audio_quirk *quirk =
  205. chip->usb_id == USB_ID(0x0582, 0x002b)
  206. ? &ua700_quirk : &uaxx_quirk;
  207. return snd_usbmidi_create(chip->card, iface,
  208. &chip->midi_list, quirk);
  209. }
  210. if (altsd->bNumEndpoints != 1)
  211. return -ENXIO;
  212. fp = kmemdup(&ua_format, sizeof(*fp), GFP_KERNEL);
  213. if (!fp)
  214. return -ENOMEM;
  215. fp->iface = altsd->bInterfaceNumber;
  216. fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress;
  217. fp->ep_attr = get_endpoint(alts, 0)->bmAttributes;
  218. fp->datainterval = 0;
  219. fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
  220. switch (fp->maxpacksize) {
  221. case 0x120:
  222. fp->rate_max = fp->rate_min = 44100;
  223. break;
  224. case 0x138:
  225. case 0x140:
  226. fp->rate_max = fp->rate_min = 48000;
  227. break;
  228. case 0x258:
  229. case 0x260:
  230. fp->rate_max = fp->rate_min = 96000;
  231. break;
  232. default:
  233. snd_printk(KERN_ERR "unknown sample rate\n");
  234. kfree(fp);
  235. return -ENXIO;
  236. }
  237. stream = (fp->endpoint & USB_DIR_IN)
  238. ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
  239. err = snd_usb_add_audio_stream(chip, stream, fp);
  240. if (err < 0) {
  241. kfree(fp);
  242. return err;
  243. }
  244. usb_set_interface(chip->dev, fp->iface, 0);
  245. return 0;
  246. }
  247. /*
  248. * Create a standard mixer for the specified interface.
  249. */
  250. static int create_standard_mixer_quirk(struct snd_usb_audio *chip,
  251. struct usb_interface *iface,
  252. struct usb_driver *driver,
  253. const struct snd_usb_audio_quirk *quirk)
  254. {
  255. if (quirk->ifnum < 0)
  256. return 0;
  257. return snd_usb_create_mixer(chip, quirk->ifnum, 0);
  258. }
  259. /*
  260. * audio-interface quirks
  261. *
  262. * returns zero if no standard audio/MIDI parsing is needed.
  263. * returns a positive value if standard audio/midi interfaces are parsed
  264. * after this.
  265. * returns a negative value at error.
  266. */
  267. int snd_usb_create_quirk(struct snd_usb_audio *chip,
  268. struct usb_interface *iface,
  269. struct usb_driver *driver,
  270. const struct snd_usb_audio_quirk *quirk)
  271. {
  272. typedef int (*quirk_func_t)(struct snd_usb_audio *,
  273. struct usb_interface *,
  274. struct usb_driver *,
  275. const struct snd_usb_audio_quirk *);
  276. static const quirk_func_t quirk_funcs[] = {
  277. [QUIRK_IGNORE_INTERFACE] = ignore_interface_quirk,
  278. [QUIRK_COMPOSITE] = create_composite_quirk,
  279. [QUIRK_MIDI_STANDARD_INTERFACE] = create_any_midi_quirk,
  280. [QUIRK_MIDI_FIXED_ENDPOINT] = create_any_midi_quirk,
  281. [QUIRK_MIDI_YAMAHA] = create_any_midi_quirk,
  282. [QUIRK_MIDI_MIDIMAN] = create_any_midi_quirk,
  283. [QUIRK_MIDI_NOVATION] = create_any_midi_quirk,
  284. [QUIRK_MIDI_MBOX2] = create_any_midi_quirk,
  285. [QUIRK_MIDI_RAW_BYTES] = create_any_midi_quirk,
  286. [QUIRK_MIDI_EMAGIC] = create_any_midi_quirk,
  287. [QUIRK_MIDI_CME] = create_any_midi_quirk,
  288. [QUIRK_MIDI_AKAI] = create_any_midi_quirk,
  289. [QUIRK_MIDI_FTDI] = create_any_midi_quirk,
  290. [QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk,
  291. [QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk,
  292. [QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk,
  293. [QUIRK_AUDIO_ALIGN_TRANSFER] = create_align_transfer_quirk,
  294. [QUIRK_AUDIO_STANDARD_MIXER] = create_standard_mixer_quirk,
  295. };
  296. if (quirk->type < QUIRK_TYPE_COUNT) {
  297. return quirk_funcs[quirk->type](chip, iface, driver, quirk);
  298. } else {
  299. snd_printd(KERN_ERR "invalid quirk type %d\n", quirk->type);
  300. return -ENXIO;
  301. }
  302. }
  303. /*
  304. * boot quirks
  305. */
  306. #define EXTIGY_FIRMWARE_SIZE_OLD 794
  307. #define EXTIGY_FIRMWARE_SIZE_NEW 483
  308. static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interface *intf)
  309. {
  310. struct usb_host_config *config = dev->actconfig;
  311. int err;
  312. if (le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_OLD ||
  313. le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_NEW) {
  314. snd_printdd("sending Extigy boot sequence...\n");
  315. /* Send message to force it to reconnect with full interface. */
  316. err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev,0),
  317. 0x10, 0x43, 0x0001, 0x000a, NULL, 0);
  318. if (err < 0) snd_printdd("error sending boot message: %d\n", err);
  319. err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
  320. &dev->descriptor, sizeof(dev->descriptor));
  321. config = dev->actconfig;
  322. if (err < 0) snd_printdd("error usb_get_descriptor: %d\n", err);
  323. err = usb_reset_configuration(dev);
  324. if (err < 0) snd_printdd("error usb_reset_configuration: %d\n", err);
  325. snd_printdd("extigy_boot: new boot length = %d\n",
  326. le16_to_cpu(get_cfg_desc(config)->wTotalLength));
  327. return -ENODEV; /* quit this anyway */
  328. }
  329. return 0;
  330. }
  331. static int snd_usb_audigy2nx_boot_quirk(struct usb_device *dev)
  332. {
  333. u8 buf = 1;
  334. snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), 0x2a,
  335. USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER,
  336. 0, 0, &buf, 1);
  337. if (buf == 0) {
  338. snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0x29,
  339. USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
  340. 1, 2000, NULL, 0);
  341. return -ENODEV;
  342. }
  343. return 0;
  344. }
  345. static int snd_usb_fasttrackpro_boot_quirk(struct usb_device *dev)
  346. {
  347. int err;
  348. if (dev->actconfig->desc.bConfigurationValue == 1) {
  349. snd_printk(KERN_INFO "usb-audio: "
  350. "Fast Track Pro switching to config #2\n");
  351. /* This function has to be available by the usb core module.
  352. * if it is not avialable the boot quirk has to be left out
  353. * and the configuration has to be set by udev or hotplug
  354. * rules
  355. */
  356. err = usb_driver_set_configuration(dev, 2);
  357. if (err < 0) {
  358. snd_printdd("error usb_driver_set_configuration: %d\n",
  359. err);
  360. return -ENODEV;
  361. }
  362. } else
  363. snd_printk(KERN_INFO "usb-audio: Fast Track Pro config OK\n");
  364. return 0;
  365. }
  366. /*
  367. * C-Media CM106/CM106+ have four 16-bit internal registers that are nicely
  368. * documented in the device's data sheet.
  369. */
  370. static int snd_usb_cm106_write_int_reg(struct usb_device *dev, int reg, u16 value)
  371. {
  372. u8 buf[4];
  373. buf[0] = 0x20;
  374. buf[1] = value & 0xff;
  375. buf[2] = (value >> 8) & 0xff;
  376. buf[3] = reg;
  377. return snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_CONFIGURATION,
  378. USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_ENDPOINT,
  379. 0, 0, &buf, 4);
  380. }
  381. static int snd_usb_cm106_boot_quirk(struct usb_device *dev)
  382. {
  383. /*
  384. * Enable line-out driver mode, set headphone source to front
  385. * channels, enable stereo mic.
  386. */
  387. return snd_usb_cm106_write_int_reg(dev, 2, 0x8004);
  388. }
  389. /*
  390. * C-Media CM6206 is based on CM106 with two additional
  391. * registers that are not documented in the data sheet.
  392. * Values here are chosen based on sniffing USB traffic
  393. * under Windows.
  394. */
  395. static int snd_usb_cm6206_boot_quirk(struct usb_device *dev)
  396. {
  397. int err = 0, reg;
  398. int val[] = {0x2004, 0x3000, 0xf800, 0x143f, 0x0000, 0x3000};
  399. for (reg = 0; reg < ARRAY_SIZE(val); reg++) {
  400. err = snd_usb_cm106_write_int_reg(dev, reg, val[reg]);
  401. if (err < 0)
  402. return err;
  403. }
  404. return err;
  405. }
  406. /*
  407. * This call will put the synth in "USB send" mode, i.e it will send MIDI
  408. * messages through USB (this is disabled at startup). The synth will
  409. * acknowledge by sending a sysex on endpoint 0x85 and by displaying a USB
  410. * sign on its LCD. Values here are chosen based on sniffing USB traffic
  411. * under Windows.
  412. */
  413. static int snd_usb_accessmusic_boot_quirk(struct usb_device *dev)
  414. {
  415. int err, actual_length;
  416. /* "midi send" enable */
  417. static const u8 seq[] = { 0x4e, 0x73, 0x52, 0x01 };
  418. void *buf = kmemdup(seq, ARRAY_SIZE(seq), GFP_KERNEL);
  419. if (!buf)
  420. return -ENOMEM;
  421. err = usb_interrupt_msg(dev, usb_sndintpipe(dev, 0x05), buf,
  422. ARRAY_SIZE(seq), &actual_length, 1000);
  423. kfree(buf);
  424. if (err < 0)
  425. return err;
  426. return 0;
  427. }
  428. /*
  429. * Some sound cards from Native Instruments are in fact compliant to the USB
  430. * audio standard of version 2 and other approved USB standards, even though
  431. * they come up as vendor-specific device when first connected.
  432. *
  433. * However, they can be told to come up with a new set of descriptors
  434. * upon their next enumeration, and the interfaces announced by the new
  435. * descriptors will then be handled by the kernel's class drivers. As the
  436. * product ID will also change, no further checks are required.
  437. */
  438. static int snd_usb_nativeinstruments_boot_quirk(struct usb_device *dev)
  439. {
  440. int ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
  441. 0xaf, USB_TYPE_VENDOR | USB_RECIP_DEVICE,
  442. cpu_to_le16(1), 0, NULL, 0, 1000);
  443. if (ret < 0)
  444. return ret;
  445. usb_reset_device(dev);
  446. /* return -EAGAIN, so the creation of an audio interface for this
  447. * temporary device is aborted. The device will reconnect with a
  448. * new product ID */
  449. return -EAGAIN;
  450. }
  451. static void mbox2_setup_48_24_magic(struct usb_device *dev)
  452. {
  453. u8 srate[3];
  454. u8 temp[12];
  455. /* Choose 48000Hz permanently */
  456. srate[0] = 0x80;
  457. srate[1] = 0xbb;
  458. srate[2] = 0x00;
  459. /* Send the magic! */
  460. snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
  461. 0x01, 0x22, 0x0100, 0x0085, &temp, 0x0003);
  462. snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
  463. 0x81, 0xa2, 0x0100, 0x0085, &srate, 0x0003);
  464. snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
  465. 0x81, 0xa2, 0x0100, 0x0086, &srate, 0x0003);
  466. snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
  467. 0x81, 0xa2, 0x0100, 0x0003, &srate, 0x0003);
  468. return;
  469. }
  470. /* Digidesign Mbox 2 needs to load firmware onboard
  471. * and driver must wait a few seconds for initialisation.
  472. */
  473. #define MBOX2_FIRMWARE_SIZE 646
  474. #define MBOX2_BOOT_LOADING 0x01 /* Hard coded into the device */
  475. #define MBOX2_BOOT_READY 0x02 /* Hard coded into the device */
  476. int snd_usb_mbox2_boot_quirk(struct usb_device *dev)
  477. {
  478. struct usb_host_config *config = dev->actconfig;
  479. int err;
  480. u8 bootresponse;
  481. int fwsize;
  482. int count;
  483. fwsize = le16_to_cpu(get_cfg_desc(config)->wTotalLength);
  484. if (fwsize != MBOX2_FIRMWARE_SIZE) {
  485. snd_printk(KERN_ERR "usb-audio: Invalid firmware size=%d.\n", fwsize);
  486. return -ENODEV;
  487. }
  488. snd_printd("usb-audio: Sending Digidesign Mbox 2 boot sequence...\n");
  489. count = 0;
  490. bootresponse = MBOX2_BOOT_LOADING;
  491. while ((bootresponse == MBOX2_BOOT_LOADING) && (count < 10)) {
  492. msleep(500); /* 0.5 second delay */
  493. snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
  494. /* Control magic - load onboard firmware */
  495. 0x85, 0xc0, 0x0001, 0x0000, &bootresponse, 0x0012);
  496. if (bootresponse == MBOX2_BOOT_READY)
  497. break;
  498. snd_printd("usb-audio: device not ready, resending boot sequence...\n");
  499. count++;
  500. }
  501. if (bootresponse != MBOX2_BOOT_READY) {
  502. snd_printk(KERN_ERR "usb-audio: Unknown bootresponse=%d, or timed out, ignoring device.\n", bootresponse);
  503. return -ENODEV;
  504. }
  505. snd_printdd("usb-audio: device initialised!\n");
  506. err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
  507. &dev->descriptor, sizeof(dev->descriptor));
  508. config = dev->actconfig;
  509. if (err < 0)
  510. snd_printd("error usb_get_descriptor: %d\n", err);
  511. err = usb_reset_configuration(dev);
  512. if (err < 0)
  513. snd_printd("error usb_reset_configuration: %d\n", err);
  514. snd_printdd("mbox2_boot: new boot length = %d\n",
  515. le16_to_cpu(get_cfg_desc(config)->wTotalLength));
  516. mbox2_setup_48_24_magic(dev);
  517. snd_printk(KERN_INFO "usb-audio: Digidesign Mbox 2: 24bit 48kHz");
  518. return 0; /* Successful boot */
  519. }
  520. /*
  521. * Setup quirks
  522. */
  523. #define MAUDIO_SET 0x01 /* parse device_setup */
  524. #define MAUDIO_SET_COMPATIBLE 0x80 /* use only "win-compatible" interfaces */
  525. #define MAUDIO_SET_DTS 0x02 /* enable DTS Digital Output */
  526. #define MAUDIO_SET_96K 0x04 /* 48-96KHz rate if set, 8-48KHz otherwise */
  527. #define MAUDIO_SET_24B 0x08 /* 24bits sample if set, 16bits otherwise */
  528. #define MAUDIO_SET_DI 0x10 /* enable Digital Input */
  529. #define MAUDIO_SET_MASK 0x1f /* bit mask for setup value */
  530. #define MAUDIO_SET_24B_48K_DI 0x19 /* 24bits+48KHz+Digital Input */
  531. #define MAUDIO_SET_24B_48K_NOTDI 0x09 /* 24bits+48KHz+No Digital Input */
  532. #define MAUDIO_SET_16B_48K_DI 0x11 /* 16bits+48KHz+Digital Input */
  533. #define MAUDIO_SET_16B_48K_NOTDI 0x01 /* 16bits+48KHz+No Digital Input */
  534. static int quattro_skip_setting_quirk(struct snd_usb_audio *chip,
  535. int iface, int altno)
  536. {
  537. /* Reset ALL ifaces to 0 altsetting.
  538. * Call it for every possible altsetting of every interface.
  539. */
  540. usb_set_interface(chip->dev, iface, 0);
  541. if (chip->setup & MAUDIO_SET) {
  542. if (chip->setup & MAUDIO_SET_COMPATIBLE) {
  543. if (iface != 1 && iface != 2)
  544. return 1; /* skip all interfaces but 1 and 2 */
  545. } else {
  546. unsigned int mask;
  547. if (iface == 1 || iface == 2)
  548. return 1; /* skip interfaces 1 and 2 */
  549. if ((chip->setup & MAUDIO_SET_96K) && altno != 1)
  550. return 1; /* skip this altsetting */
  551. mask = chip->setup & MAUDIO_SET_MASK;
  552. if (mask == MAUDIO_SET_24B_48K_DI && altno != 2)
  553. return 1; /* skip this altsetting */
  554. if (mask == MAUDIO_SET_24B_48K_NOTDI && altno != 3)
  555. return 1; /* skip this altsetting */
  556. if (mask == MAUDIO_SET_16B_48K_NOTDI && altno != 4)
  557. return 1; /* skip this altsetting */
  558. }
  559. }
  560. snd_printdd(KERN_INFO
  561. "using altsetting %d for interface %d config %d\n",
  562. altno, iface, chip->setup);
  563. return 0; /* keep this altsetting */
  564. }
  565. static int audiophile_skip_setting_quirk(struct snd_usb_audio *chip,
  566. int iface,
  567. int altno)
  568. {
  569. /* Reset ALL ifaces to 0 altsetting.
  570. * Call it for every possible altsetting of every interface.
  571. */
  572. usb_set_interface(chip->dev, iface, 0);
  573. if (chip->setup & MAUDIO_SET) {
  574. unsigned int mask;
  575. if ((chip->setup & MAUDIO_SET_DTS) && altno != 6)
  576. return 1; /* skip this altsetting */
  577. if ((chip->setup & MAUDIO_SET_96K) && altno != 1)
  578. return 1; /* skip this altsetting */
  579. mask = chip->setup & MAUDIO_SET_MASK;
  580. if (mask == MAUDIO_SET_24B_48K_DI && altno != 2)
  581. return 1; /* skip this altsetting */
  582. if (mask == MAUDIO_SET_24B_48K_NOTDI && altno != 3)
  583. return 1; /* skip this altsetting */
  584. if (mask == MAUDIO_SET_16B_48K_DI && altno != 4)
  585. return 1; /* skip this altsetting */
  586. if (mask == MAUDIO_SET_16B_48K_NOTDI && altno != 5)
  587. return 1; /* skip this altsetting */
  588. }
  589. return 0; /* keep this altsetting */
  590. }
  591. static int fasttrackpro_skip_setting_quirk(struct snd_usb_audio *chip,
  592. int iface, int altno)
  593. {
  594. /* Reset ALL ifaces to 0 altsetting.
  595. * Call it for every possible altsetting of every interface.
  596. */
  597. usb_set_interface(chip->dev, iface, 0);
  598. /* possible configuration where both inputs and only one output is
  599. *used is not supported by the current setup
  600. */
  601. if (chip->setup & (MAUDIO_SET | MAUDIO_SET_24B)) {
  602. if (chip->setup & MAUDIO_SET_96K) {
  603. if (altno != 3 && altno != 6)
  604. return 1;
  605. } else if (chip->setup & MAUDIO_SET_DI) {
  606. if (iface == 4)
  607. return 1; /* no analog input */
  608. if (altno != 2 && altno != 5)
  609. return 1; /* enable only altsets 2 and 5 */
  610. } else {
  611. if (iface == 5)
  612. return 1; /* disable digialt input */
  613. if (altno != 2 && altno != 5)
  614. return 1; /* enalbe only altsets 2 and 5 */
  615. }
  616. } else {
  617. /* keep only 16-Bit mode */
  618. if (altno != 1)
  619. return 1;
  620. }
  621. snd_printdd(KERN_INFO
  622. "using altsetting %d for interface %d config %d\n",
  623. altno, iface, chip->setup);
  624. return 0; /* keep this altsetting */
  625. }
  626. int snd_usb_apply_interface_quirk(struct snd_usb_audio *chip,
  627. int iface,
  628. int altno)
  629. {
  630. /* audiophile usb: skip altsets incompatible with device_setup */
  631. if (chip->usb_id == USB_ID(0x0763, 0x2003))
  632. return audiophile_skip_setting_quirk(chip, iface, altno);
  633. /* quattro usb: skip altsets incompatible with device_setup */
  634. if (chip->usb_id == USB_ID(0x0763, 0x2001))
  635. return quattro_skip_setting_quirk(chip, iface, altno);
  636. /* fasttrackpro usb: skip altsets incompatible with device_setup */
  637. if (chip->usb_id == USB_ID(0x0763, 0x2012))
  638. return fasttrackpro_skip_setting_quirk(chip, iface, altno);
  639. return 0;
  640. }
  641. int snd_usb_apply_boot_quirk(struct usb_device *dev,
  642. struct usb_interface *intf,
  643. const struct snd_usb_audio_quirk *quirk)
  644. {
  645. u32 id = USB_ID(le16_to_cpu(dev->descriptor.idVendor),
  646. le16_to_cpu(dev->descriptor.idProduct));
  647. switch (id) {
  648. case USB_ID(0x041e, 0x3000):
  649. /* SB Extigy needs special boot-up sequence */
  650. /* if more models come, this will go to the quirk list. */
  651. return snd_usb_extigy_boot_quirk(dev, intf);
  652. case USB_ID(0x041e, 0x3020):
  653. /* SB Audigy 2 NX needs its own boot-up magic, too */
  654. return snd_usb_audigy2nx_boot_quirk(dev);
  655. case USB_ID(0x10f5, 0x0200):
  656. /* C-Media CM106 / Turtle Beach Audio Advantage Roadie */
  657. return snd_usb_cm106_boot_quirk(dev);
  658. case USB_ID(0x0d8c, 0x0102):
  659. /* C-Media CM6206 / CM106-Like Sound Device */
  660. case USB_ID(0x0ccd, 0x00b1): /* Terratec Aureon 7.1 USB */
  661. return snd_usb_cm6206_boot_quirk(dev);
  662. case USB_ID(0x0dba, 0x3000):
  663. /* Digidesign Mbox 2 */
  664. return snd_usb_mbox2_boot_quirk(dev);
  665. case USB_ID(0x133e, 0x0815):
  666. /* Access Music VirusTI Desktop */
  667. return snd_usb_accessmusic_boot_quirk(dev);
  668. case USB_ID(0x17cc, 0x1000): /* Komplete Audio 6 */
  669. case USB_ID(0x17cc, 0x1010): /* Traktor Audio 6 */
  670. case USB_ID(0x17cc, 0x1020): /* Traktor Audio 10 */
  671. return snd_usb_nativeinstruments_boot_quirk(dev);
  672. case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro USB */
  673. return snd_usb_fasttrackpro_boot_quirk(dev);
  674. }
  675. return 0;
  676. }
  677. /*
  678. * check if the device uses big-endian samples
  679. */
  680. int snd_usb_is_big_endian_format(struct snd_usb_audio *chip, struct audioformat *fp)
  681. {
  682. /* it depends on altsetting whether the device is big-endian or not */
  683. switch (chip->usb_id) {
  684. case USB_ID(0x0763, 0x2001): /* M-Audio Quattro: captured data only */
  685. if (fp->altsetting == 2 || fp->altsetting == 3 ||
  686. fp->altsetting == 5 || fp->altsetting == 6)
  687. return 1;
  688. break;
  689. case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */
  690. if (chip->setup == 0x00 ||
  691. fp->altsetting == 1 || fp->altsetting == 2 ||
  692. fp->altsetting == 3)
  693. return 1;
  694. break;
  695. case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro */
  696. if (fp->altsetting == 2 || fp->altsetting == 3 ||
  697. fp->altsetting == 5 || fp->altsetting == 6)
  698. return 1;
  699. break;
  700. }
  701. return 0;
  702. }
  703. /*
  704. * For E-Mu 0404USB/0202USB/TrackerPre/0204 sample rate should be set for device,
  705. * not for interface.
  706. */
  707. enum {
  708. EMU_QUIRK_SR_44100HZ = 0,
  709. EMU_QUIRK_SR_48000HZ,
  710. EMU_QUIRK_SR_88200HZ,
  711. EMU_QUIRK_SR_96000HZ,
  712. EMU_QUIRK_SR_176400HZ,
  713. EMU_QUIRK_SR_192000HZ
  714. };
  715. static void set_format_emu_quirk(struct snd_usb_substream *subs,
  716. struct audioformat *fmt)
  717. {
  718. unsigned char emu_samplerate_id = 0;
  719. /* When capture is active
  720. * sample rate shouldn't be changed
  721. * by playback substream
  722. */
  723. if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK) {
  724. if (subs->stream->substream[SNDRV_PCM_STREAM_CAPTURE].interface != -1)
  725. return;
  726. }
  727. switch (fmt->rate_min) {
  728. case 48000:
  729. emu_samplerate_id = EMU_QUIRK_SR_48000HZ;
  730. break;
  731. case 88200:
  732. emu_samplerate_id = EMU_QUIRK_SR_88200HZ;
  733. break;
  734. case 96000:
  735. emu_samplerate_id = EMU_QUIRK_SR_96000HZ;
  736. break;
  737. case 176400:
  738. emu_samplerate_id = EMU_QUIRK_SR_176400HZ;
  739. break;
  740. case 192000:
  741. emu_samplerate_id = EMU_QUIRK_SR_192000HZ;
  742. break;
  743. default:
  744. emu_samplerate_id = EMU_QUIRK_SR_44100HZ;
  745. break;
  746. }
  747. snd_emuusb_set_samplerate(subs->stream->chip, emu_samplerate_id);
  748. }
  749. void snd_usb_set_format_quirk(struct snd_usb_substream *subs,
  750. struct audioformat *fmt)
  751. {
  752. switch (subs->stream->chip->usb_id) {
  753. case USB_ID(0x041e, 0x3f02): /* E-Mu 0202 USB */
  754. case USB_ID(0x041e, 0x3f04): /* E-Mu 0404 USB */
  755. case USB_ID(0x041e, 0x3f0a): /* E-Mu Tracker Pre */
  756. case USB_ID(0x041e, 0x3f19): /* E-Mu 0204 USB */
  757. set_format_emu_quirk(subs, fmt);
  758. break;
  759. }
  760. }
  761. void snd_usb_endpoint_start_quirk(struct snd_usb_endpoint *ep)
  762. {
  763. /*
  764. * "Playback Design" products send bogus feedback data at the start
  765. * of the stream. Ignore them.
  766. */
  767. if ((le16_to_cpu(ep->chip->dev->descriptor.idVendor) == 0x23ba) &&
  768. ep->type == SND_USB_ENDPOINT_TYPE_SYNC)
  769. ep->skip_packets = 4;
  770. }
  771. void snd_usb_ctl_msg_quirk(struct usb_device *dev, unsigned int pipe,
  772. __u8 request, __u8 requesttype, __u16 value,
  773. __u16 index, void *data, __u16 size)
  774. {
  775. /*
  776. * "Playback Design" products need a 20ms delay after each
  777. * class compliant request
  778. */
  779. if ((le16_to_cpu(dev->descriptor.idVendor) == 0x23ba) &&
  780. (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS)
  781. mdelay(20);
  782. }