| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061 |
- #
- # Makefile for kernel SPI drivers.
- #
- ifeq ($(CONFIG_SPI_DEBUG),y)
- EXTRA_CFLAGS += -DDEBUG
- endif
- # small core, mostly translating board-specific
- # config declarations into driver model code
- obj-$(CONFIG_SPI_MASTER) += spi.o
- # SPI master controller drivers (bus)
- obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o
- obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o
- obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o
- obj-$(CONFIG_SPI_AU1550) += au1550_spi.o
- obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o
- obj-$(CONFIG_SPI_DESIGNWARE) += dw_spi.o
- obj-$(CONFIG_SPI_DW_PCI) += dw_spi_pci.o
- obj-$(CONFIG_SPI_GPIO) += spi_gpio.o
- obj-$(CONFIG_SPI_IMX) += spi_imx.o
- obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o
- obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o
- obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o
- obj-$(CONFIG_SPI_OMAP24XX) += omap2_mcspi.o
- obj-$(CONFIG_SPI_OMAP_100K) += omap_spi_100k.o
- obj-$(CONFIG_SPI_ORION) += orion_spi.o
- obj-$(CONFIG_SPI_PL022) += amba-pl022.o
- obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52xx_psc_spi.o
- obj-$(CONFIG_SPI_MPC52xx) += mpc52xx_spi.o
- obj-$(CONFIG_SPI_MPC8xxx) += spi_mpc8xxx.o
- obj-$(CONFIG_SPI_PPC4xx) += spi_ppc4xx.o
- obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
- obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx_hw.o
- obj-$(CONFIG_SPI_S3C64XX) += spi_s3c64xx.o
- obj-$(CONFIG_SPI_TXX9) += spi_txx9.o
- obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
- obj-$(CONFIG_SPI_XILINX_OF) += xilinx_spi_of.o
- obj-$(CONFIG_SPI_XILINX_PLTFM) += xilinx_spi_pltfm.o
- obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o
- obj-$(CONFIG_SPI_SH_MSIOF) += spi_sh_msiof.o
- obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o
- obj-$(CONFIG_SPI_NUC900) += spi_nuc900.o
- # special build for s3c24xx spi driver with fiq support
- spi_s3c24xx_hw-y := spi_s3c24xx.o
- spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi_s3c24xx_fiq.o
- # ... add above this line ...
- # SPI protocol drivers (device/link on bus)
- obj-$(CONFIG_SPI_SPIDEV) += spidev.o
- obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o
- # ... add above this line ...
- # SPI slave controller drivers (upstream link)
- # ... add above this line ...
- # SPI slave drivers (protocol for that link)
- # ... add above this line ...
|
