sbp2.h 10 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346
  1. /*
  2. * sbp2.h - Defines and prototypes for sbp2.c
  3. *
  4. * Copyright (C) 2000 James Goodwin, Filanet Corporation (www.filanet.com)
  5. * jamesg@filanet.com
  6. *
  7. * This program is free software; you can redistribute it and/or modify
  8. * it under the terms of the GNU General Public License as published by
  9. * the Free Software Foundation; either version 2 of the License, or
  10. * (at your option) any later version.
  11. *
  12. * This program is distributed in the hope that it will be useful,
  13. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15. * GNU General Public License for more details.
  16. *
  17. * You should have received a copy of the GNU General Public License
  18. * along with this program; if not, write to the Free Software Foundation,
  19. * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  20. */
  21. #ifndef SBP2_H
  22. #define SBP2_H
  23. #define SBP2_DEVICE_NAME "sbp2"
  24. /*
  25. * There is no transport protocol limit to the CDB length, but we implement
  26. * a fixed length only. 16 bytes is enough for disks larger than 2 TB.
  27. */
  28. #define SBP2_MAX_CDB_SIZE 16
  29. /*
  30. * SBP-2 specific definitions
  31. */
  32. #define ORB_DIRECTION_WRITE_TO_MEDIA 0x0
  33. #define ORB_DIRECTION_READ_FROM_MEDIA 0x1
  34. #define ORB_DIRECTION_NO_DATA_TRANSFER 0x2
  35. #define ORB_SET_NULL_PTR(v) (((v) & 0x1) << 31)
  36. #define ORB_SET_NOTIFY(v) (((v) & 0x1) << 31)
  37. #define ORB_SET_RQ_FMT(v) (((v) & 0x3) << 29)
  38. #define ORB_SET_NODE_ID(v) (((v) & 0xffff) << 16)
  39. #define ORB_SET_STATUS_FIFO_HI(v, id) ((v) >> 32 | ORB_SET_NODE_ID(id))
  40. #define ORB_SET_STATUS_FIFO_LO(v) ((v) & 0xffffffff)
  41. #define ORB_SET_DATA_SIZE(v) ((v) & 0xffff)
  42. #define ORB_SET_PAGE_SIZE(v) (((v) & 0x7) << 16)
  43. #define ORB_SET_PAGE_TABLE_PRESENT(v) (((v) & 0x1) << 19)
  44. #define ORB_SET_MAX_PAYLOAD(v) (((v) & 0xf) << 20)
  45. #define ORB_SET_SPEED(v) (((v) & 0x7) << 24)
  46. #define ORB_SET_DIRECTION(v) (((v) & 0x1) << 27)
  47. struct sbp2_command_orb {
  48. u32 next_ORB_hi;
  49. u32 next_ORB_lo;
  50. u32 data_descriptor_hi;
  51. u32 data_descriptor_lo;
  52. u32 misc;
  53. u8 cdb[SBP2_MAX_CDB_SIZE];
  54. } __attribute__((packed));
  55. #define SBP2_LOGIN_REQUEST 0x0
  56. #define SBP2_QUERY_LOGINS_REQUEST 0x1
  57. #define SBP2_RECONNECT_REQUEST 0x3
  58. #define SBP2_SET_PASSWORD_REQUEST 0x4
  59. #define SBP2_LOGOUT_REQUEST 0x7
  60. #define SBP2_ABORT_TASK_REQUEST 0xb
  61. #define SBP2_ABORT_TASK_SET 0xc
  62. #define SBP2_LOGICAL_UNIT_RESET 0xe
  63. #define SBP2_TARGET_RESET_REQUEST 0xf
  64. #define ORB_SET_LUN(v) ((v) & 0xffff)
  65. #define ORB_SET_FUNCTION(v) (((v) & 0xf) << 16)
  66. #define ORB_SET_RECONNECT(v) (((v) & 0xf) << 20)
  67. #define ORB_SET_EXCLUSIVE(v) ((v) ? 1 << 28 : 0)
  68. #define ORB_SET_LOGIN_RESP_LENGTH(v) ((v) & 0xffff)
  69. #define ORB_SET_PASSWD_LENGTH(v) (((v) & 0xffff) << 16)
  70. struct sbp2_login_orb {
  71. u32 password_hi;
  72. u32 password_lo;
  73. u32 login_response_hi;
  74. u32 login_response_lo;
  75. u32 lun_misc;
  76. u32 passwd_resp_lengths;
  77. u32 status_fifo_hi;
  78. u32 status_fifo_lo;
  79. } __attribute__((packed));
  80. #define RESPONSE_GET_LOGIN_ID(v) ((v) & 0xffff)
  81. #define RESPONSE_GET_LENGTH(v) (((v) >> 16) & 0xffff)
  82. #define RESPONSE_GET_RECONNECT_HOLD(v) ((v) & 0xffff)
  83. struct sbp2_login_response {
  84. u32 length_login_ID;
  85. u32 command_block_agent_hi;
  86. u32 command_block_agent_lo;
  87. u32 reconnect_hold;
  88. } __attribute__((packed));
  89. #define ORB_SET_LOGIN_ID(v) ((v) & 0xffff)
  90. #define ORB_SET_QUERY_LOGINS_RESP_LENGTH(v) ((v) & 0xffff)
  91. struct sbp2_query_logins_orb {
  92. u32 reserved1;
  93. u32 reserved2;
  94. u32 query_response_hi;
  95. u32 query_response_lo;
  96. u32 lun_misc;
  97. u32 reserved_resp_length;
  98. u32 status_fifo_hi;
  99. u32 status_fifo_lo;
  100. } __attribute__((packed));
  101. #define RESPONSE_GET_MAX_LOGINS(v) ((v) & 0xffff)
  102. #define RESPONSE_GET_ACTIVE_LOGINS(v) ((RESPONSE_GET_LENGTH((v)) - 4) / 12)
  103. struct sbp2_query_logins_response {
  104. u32 length_max_logins;
  105. u32 misc_IDs;
  106. u32 initiator_misc_hi;
  107. u32 initiator_misc_lo;
  108. } __attribute__((packed));
  109. struct sbp2_reconnect_orb {
  110. u32 reserved1;
  111. u32 reserved2;
  112. u32 reserved3;
  113. u32 reserved4;
  114. u32 login_ID_misc;
  115. u32 reserved5;
  116. u32 status_fifo_hi;
  117. u32 status_fifo_lo;
  118. } __attribute__((packed));
  119. struct sbp2_logout_orb {
  120. u32 reserved1;
  121. u32 reserved2;
  122. u32 reserved3;
  123. u32 reserved4;
  124. u32 login_ID_misc;
  125. u32 reserved5;
  126. u32 status_fifo_hi;
  127. u32 status_fifo_lo;
  128. } __attribute__((packed));
  129. struct sbp2_unrestricted_page_table {
  130. __be32 high;
  131. __be32 low;
  132. };
  133. #define RESP_STATUS_REQUEST_COMPLETE 0x0
  134. #define RESP_STATUS_TRANSPORT_FAILURE 0x1
  135. #define RESP_STATUS_ILLEGAL_REQUEST 0x2
  136. #define RESP_STATUS_VENDOR_DEPENDENT 0x3
  137. #define SBP2_STATUS_NO_ADDITIONAL_INFO 0x0
  138. #define SBP2_STATUS_REQ_TYPE_NOT_SUPPORTED 0x1
  139. #define SBP2_STATUS_SPEED_NOT_SUPPORTED 0x2
  140. #define SBP2_STATUS_PAGE_SIZE_NOT_SUPPORTED 0x3
  141. #define SBP2_STATUS_ACCESS_DENIED 0x4
  142. #define SBP2_STATUS_LU_NOT_SUPPORTED 0x5
  143. #define SBP2_STATUS_MAX_PAYLOAD_TOO_SMALL 0x6
  144. #define SBP2_STATUS_RESOURCES_UNAVAILABLE 0x8
  145. #define SBP2_STATUS_FUNCTION_REJECTED 0x9
  146. #define SBP2_STATUS_LOGIN_ID_NOT_RECOGNIZED 0xa
  147. #define SBP2_STATUS_DUMMY_ORB_COMPLETED 0xb
  148. #define SBP2_STATUS_REQUEST_ABORTED 0xc
  149. #define SBP2_STATUS_UNSPECIFIED_ERROR 0xff
  150. #define SFMT_CURRENT_ERROR 0x0
  151. #define SFMT_DEFERRED_ERROR 0x1
  152. #define SFMT_VENDOR_DEPENDENT_STATUS 0x3
  153. #define STATUS_GET_SRC(v) (((v) >> 30) & 0x3)
  154. #define STATUS_GET_RESP(v) (((v) >> 28) & 0x3)
  155. #define STATUS_GET_LEN(v) (((v) >> 24) & 0x7)
  156. #define STATUS_GET_SBP_STATUS(v) (((v) >> 16) & 0xff)
  157. #define STATUS_GET_ORB_OFFSET_HI(v) ((v) & 0x0000ffff)
  158. #define STATUS_TEST_DEAD(v) ((v) & 0x08000000)
  159. /* test 'resp' | 'dead' | 'sbp2_status' */
  160. #define STATUS_TEST_RDS(v) ((v) & 0x38ff0000)
  161. struct sbp2_status_block {
  162. u32 ORB_offset_hi_misc;
  163. u32 ORB_offset_lo;
  164. u8 command_set_dependent[24];
  165. } __attribute__((packed));
  166. /*
  167. * SBP2 related configuration ROM definitions
  168. */
  169. #define SBP2_UNIT_DIRECTORY_OFFSET_KEY 0xd1
  170. #define SBP2_CSR_OFFSET_KEY 0x54
  171. #define SBP2_UNIT_SPEC_ID_KEY 0x12
  172. #define SBP2_UNIT_SW_VERSION_KEY 0x13
  173. #define SBP2_COMMAND_SET_SPEC_ID_KEY 0x38
  174. #define SBP2_COMMAND_SET_KEY 0x39
  175. #define SBP2_UNIT_CHARACTERISTICS_KEY 0x3a
  176. #define SBP2_DEVICE_TYPE_AND_LUN_KEY 0x14
  177. #define SBP2_FIRMWARE_REVISION_KEY 0x3c
  178. #define SBP2_AGENT_STATE_OFFSET 0x00ULL
  179. #define SBP2_AGENT_RESET_OFFSET 0x04ULL
  180. #define SBP2_ORB_POINTER_OFFSET 0x08ULL
  181. #define SBP2_DOORBELL_OFFSET 0x10ULL
  182. #define SBP2_UNSOLICITED_STATUS_ENABLE_OFFSET 0x14ULL
  183. #define SBP2_UNSOLICITED_STATUS_VALUE 0xf
  184. #define SBP2_BUSY_TIMEOUT_ADDRESS 0xfffff0000210ULL
  185. /* biggest possible value for Single Phase Retry count is 0xf */
  186. #define SBP2_BUSY_TIMEOUT_VALUE 0xf
  187. #define SBP2_AGENT_RESET_DATA 0xf
  188. #define SBP2_UNIT_SPEC_ID_ENTRY 0x0000609e
  189. #define SBP2_SW_VERSION_ENTRY 0x00010483
  190. /*
  191. * The default maximum s/g segment size of a FireWire controller is
  192. * usually 0x10000, but SBP-2 only allows 0xffff. Since buffers have to
  193. * be quadlet-aligned, we set the length limit to 0xffff & ~3.
  194. */
  195. #define SBP2_MAX_SEG_SIZE 0xfffc
  196. /*
  197. * There is no real limitation of the queue depth (i.e. length of the linked
  198. * list of command ORBs) at the target. The chosen depth is merely an
  199. * implementation detail of the sbp2 driver.
  200. */
  201. #define SBP2_MAX_CMDS 8
  202. #define SBP2_SCSI_STATUS_GOOD 0x0
  203. #define SBP2_SCSI_STATUS_CHECK_CONDITION 0x2
  204. #define SBP2_SCSI_STATUS_CONDITION_MET 0x4
  205. #define SBP2_SCSI_STATUS_BUSY 0x8
  206. #define SBP2_SCSI_STATUS_RESERVATION_CONFLICT 0x18
  207. #define SBP2_SCSI_STATUS_COMMAND_TERMINATED 0x22
  208. #define SBP2_SCSI_STATUS_SELECTION_TIMEOUT 0xff
  209. /*
  210. * Representations of commands and devices
  211. */
  212. /* Per SCSI command */
  213. struct sbp2_command_info {
  214. struct list_head list;
  215. struct sbp2_command_orb command_orb;
  216. dma_addr_t command_orb_dma;
  217. struct scsi_cmnd *Current_SCpnt;
  218. void (*Current_done)(struct scsi_cmnd *);
  219. /* Also need s/g structure for each sbp2 command */
  220. struct sbp2_unrestricted_page_table
  221. scatter_gather_element[SG_ALL] __attribute__((aligned(8)));
  222. dma_addr_t sge_dma;
  223. };
  224. /* Per FireWire host */
  225. struct sbp2_fwhost_info {
  226. struct hpsb_host *host;
  227. struct list_head logical_units;
  228. };
  229. /* Per logical unit */
  230. struct sbp2_lu {
  231. /* Operation request blocks */
  232. struct sbp2_command_orb *last_orb;
  233. dma_addr_t last_orb_dma;
  234. struct sbp2_login_orb *login_orb;
  235. dma_addr_t login_orb_dma;
  236. struct sbp2_login_response *login_response;
  237. dma_addr_t login_response_dma;
  238. struct sbp2_query_logins_orb *query_logins_orb;
  239. dma_addr_t query_logins_orb_dma;
  240. struct sbp2_query_logins_response *query_logins_response;
  241. dma_addr_t query_logins_response_dma;
  242. struct sbp2_reconnect_orb *reconnect_orb;
  243. dma_addr_t reconnect_orb_dma;
  244. struct sbp2_logout_orb *logout_orb;
  245. dma_addr_t logout_orb_dma;
  246. struct sbp2_status_block status_block;
  247. /* How to talk to the unit */
  248. u64 management_agent_addr;
  249. u64 command_block_agent_addr;
  250. u32 speed_code;
  251. u32 max_payload_size;
  252. u16 lun;
  253. /* Address for the unit to write status blocks to */
  254. u64 status_fifo_addr;
  255. /* Waitqueue flag for logins, reconnects, logouts, query logins */
  256. unsigned int access_complete:1;
  257. /* Pool of command ORBs for this logical unit */
  258. spinlock_t cmd_orb_lock;
  259. struct list_head cmd_orb_inuse;
  260. struct list_head cmd_orb_completed;
  261. /* Backlink to FireWire host; list of units attached to the host */
  262. struct sbp2_fwhost_info *hi;
  263. struct list_head lu_list;
  264. /* IEEE 1394 core's device representations */
  265. struct node_entry *ne;
  266. struct unit_directory *ud;
  267. /* SCSI core's device representations */
  268. struct scsi_device *sdev;
  269. struct Scsi_Host *shost;
  270. /* Device specific workarounds/brokeness */
  271. unsigned workarounds;
  272. /* Connection state */
  273. atomic_t state;
  274. /* For deferred requests to the fetch agent */
  275. struct work_struct protocol_work;
  276. };
  277. /* For use in sbp2_lu.state */
  278. enum sbp2lu_state_types {
  279. SBP2LU_STATE_RUNNING, /* all normal */
  280. SBP2LU_STATE_IN_RESET, /* between bus reset and reconnect */
  281. SBP2LU_STATE_IN_SHUTDOWN /* when sbp2_remove was called */
  282. };
  283. /* For use in sbp2_lu.workarounds and in the corresponding
  284. * module load parameter */
  285. #define SBP2_WORKAROUND_128K_MAX_TRANS 0x1
  286. #define SBP2_WORKAROUND_INQUIRY_36 0x2
  287. #define SBP2_WORKAROUND_MODE_SENSE_8 0x4
  288. #define SBP2_WORKAROUND_FIX_CAPACITY 0x8
  289. #define SBP2_WORKAROUND_DELAY_INQUIRY 0x10
  290. #define SBP2_INQUIRY_DELAY 12
  291. #define SBP2_WORKAROUND_POWER_CONDITION 0x20
  292. #define SBP2_WORKAROUND_OVERRIDE 0x100
  293. #endif /* SBP2_H */