123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355 |
- /*
- * AMD CS5535/CS5536 GPIO driver
- * Copyright (C) 2006 Advanced Micro Devices, Inc.
- * Copyright (C) 2007-2009 Andres Salomon <dilinger@collabora.co.uk>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of version 2 of the GNU General Public License
- * as published by the Free Software Foundation.
- */
- #include <linux/kernel.h>
- #include <linux/spinlock.h>
- #include <linux/module.h>
- #include <linux/pci.h>
- #include <linux/gpio.h>
- #include <linux/io.h>
- #include <linux/cs5535.h>
- #define DRV_NAME "cs5535-gpio"
- #define GPIO_BAR 1
- /*
- * Some GPIO pins
- * 31-29,23 : reserved (always mask out)
- * 28 : Power Button
- * 26 : PME#
- * 22-16 : LPC
- * 14,15 : SMBus
- * 9,8 : UART1
- * 7 : PCI INTB
- * 3,4 : UART2/DDC
- * 2 : IDE_IRQ0
- * 1 : AC_BEEP
- * 0 : PCI INTA
- *
- * If a mask was not specified, allow all except
- * reserved and Power Button
- */
- #define GPIO_DEFAULT_MASK 0x0F7FFFFF
- static ulong mask = GPIO_DEFAULT_MASK;
- module_param_named(mask, mask, ulong, 0444);
- MODULE_PARM_DESC(mask, "GPIO channel mask.");
- static struct cs5535_gpio_chip {
- struct gpio_chip chip;
- resource_size_t base;
- struct pci_dev *pdev;
- spinlock_t lock;
- } cs5535_gpio_chip;
- /*
- * The CS5535/CS5536 GPIOs support a number of extra features not defined
- * by the gpio_chip API, so these are exported. For a full list of the
- * registers, see include/linux/cs5535.h.
- */
- static void __cs5535_gpio_set(struct cs5535_gpio_chip *chip, unsigned offset,
- unsigned int reg)
- {
- if (offset < 16)
- /* low bank register */
- outl(1 << offset, chip->base + reg);
- else
- /* high bank register */
- outl(1 << (offset - 16), chip->base + 0x80 + reg);
- }
- void cs5535_gpio_set(unsigned offset, unsigned int reg)
- {
- struct cs5535_gpio_chip *chip = &cs5535_gpio_chip;
- unsigned long flags;
- spin_lock_irqsave(&chip->lock, flags);
- __cs5535_gpio_set(chip, offset, reg);
- spin_unlock_irqrestore(&chip->lock, flags);
- }
- EXPORT_SYMBOL_GPL(cs5535_gpio_set);
- static void __cs5535_gpio_clear(struct cs5535_gpio_chip *chip, unsigned offset,
- unsigned int reg)
- {
- if (offset < 16)
- /* low bank register */
- outl(1 << (offset + 16), chip->base + reg);
- else
- /* high bank register */
- outl(1 << offset, chip->base + 0x80 + reg);
- }
- void cs5535_gpio_clear(unsigned offset, unsigned int reg)
- {
- struct cs5535_gpio_chip *chip = &cs5535_gpio_chip;
- unsigned long flags;
- spin_lock_irqsave(&chip->lock, flags);
- __cs5535_gpio_clear(chip, offset, reg);
- spin_unlock_irqrestore(&chip->lock, flags);
- }
- EXPORT_SYMBOL_GPL(cs5535_gpio_clear);
- int cs5535_gpio_isset(unsigned offset, unsigned int reg)
- {
- struct cs5535_gpio_chip *chip = &cs5535_gpio_chip;
- unsigned long flags;
- long val;
- spin_lock_irqsave(&chip->lock, flags);
- if (offset < 16)
- /* low bank register */
- val = inl(chip->base + reg);
- else {
- /* high bank register */
- val = inl(chip->base + 0x80 + reg);
- offset -= 16;
- }
- spin_unlock_irqrestore(&chip->lock, flags);
- return (val & (1 << offset)) ? 1 : 0;
- }
- EXPORT_SYMBOL_GPL(cs5535_gpio_isset);
- /*
- * Generic gpio_chip API support.
- */
- static int chip_gpio_request(struct gpio_chip *c, unsigned offset)
- {
- struct cs5535_gpio_chip *chip = (struct cs5535_gpio_chip *) c;
- unsigned long flags;
- spin_lock_irqsave(&chip->lock, flags);
- /* check if this pin is available */
- if ((mask & (1 << offset)) == 0) {
- dev_info(&chip->pdev->dev,
- "pin %u is not available (check mask)\n", offset);
- spin_unlock_irqrestore(&chip->lock, flags);
- return -EINVAL;
- }
- /* disable output aux 1 & 2 on this pin */
- __cs5535_gpio_clear(chip, offset, GPIO_OUTPUT_AUX1);
- __cs5535_gpio_clear(chip, offset, GPIO_OUTPUT_AUX2);
- /* disable input aux 1 on this pin */
- __cs5535_gpio_clear(chip, offset, GPIO_INPUT_AUX1);
- spin_unlock_irqrestore(&chip->lock, flags);
- return 0;
- }
- static int chip_gpio_get(struct gpio_chip *chip, unsigned offset)
- {
- return cs5535_gpio_isset(offset, GPIO_OUTPUT_VAL);
- }
- static void chip_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
- {
- if (val)
- cs5535_gpio_set(offset, GPIO_OUTPUT_VAL);
- else
- cs5535_gpio_clear(offset, GPIO_OUTPUT_VAL);
- }
- static int chip_direction_input(struct gpio_chip *c, unsigned offset)
- {
- struct cs5535_gpio_chip *chip = (struct cs5535_gpio_chip *) c;
- unsigned long flags;
- spin_lock_irqsave(&chip->lock, flags);
- __cs5535_gpio_set(chip, offset, GPIO_INPUT_ENABLE);
- spin_unlock_irqrestore(&chip->lock, flags);
- return 0;
- }
- static int chip_direction_output(struct gpio_chip *c, unsigned offset, int val)
- {
- struct cs5535_gpio_chip *chip = (struct cs5535_gpio_chip *) c;
- unsigned long flags;
- spin_lock_irqsave(&chip->lock, flags);
- __cs5535_gpio_set(chip, offset, GPIO_OUTPUT_ENABLE);
- if (val)
- __cs5535_gpio_set(chip, offset, GPIO_OUTPUT_VAL);
- else
- __cs5535_gpio_clear(chip, offset, GPIO_OUTPUT_VAL);
- spin_unlock_irqrestore(&chip->lock, flags);
- return 0;
- }
- static char *cs5535_gpio_names[] = {
- "GPIO0", "GPIO1", "GPIO2", "GPIO3",
- "GPIO4", "GPIO5", "GPIO6", "GPIO7",
- "GPIO8", "GPIO9", "GPIO10", "GPIO11",
- "GPIO12", "GPIO13", "GPIO14", "GPIO15",
- "GPIO16", "GPIO17", "GPIO18", "GPIO19",
- "GPIO20", "GPIO21", "GPIO22", NULL,
- "GPIO24", "GPIO25", "GPIO26", "GPIO27",
- "GPIO28", NULL, NULL, NULL,
- };
- static struct cs5535_gpio_chip cs5535_gpio_chip = {
- .chip = {
- .owner = THIS_MODULE,
- .label = DRV_NAME,
- .base = 0,
- .ngpio = 32,
- .names = cs5535_gpio_names,
- .request = chip_gpio_request,
- .get = chip_gpio_get,
- .set = chip_gpio_set,
- .direction_input = chip_direction_input,
- .direction_output = chip_direction_output,
- },
- };
- static int __init cs5535_gpio_probe(struct pci_dev *pdev,
- const struct pci_device_id *pci_id)
- {
- int err;
- ulong mask_orig = mask;
- /* There are two ways to get the GPIO base address; one is by
- * fetching it from MSR_LBAR_GPIO, the other is by reading the
- * PCI BAR info. The latter method is easier (especially across
- * different architectures), so we'll stick with that for now. If
- * it turns out to be unreliable in the face of crappy BIOSes, we
- * can always go back to using MSRs.. */
- err = pci_enable_device_io(pdev);
- if (err) {
- dev_err(&pdev->dev, "can't enable device IO\n");
- goto done;
- }
- err = pci_request_region(pdev, GPIO_BAR, DRV_NAME);
- if (err) {
- dev_err(&pdev->dev, "can't alloc PCI BAR #%d\n", GPIO_BAR);
- goto done;
- }
- /* set up the driver-specific struct */
- cs5535_gpio_chip.base = pci_resource_start(pdev, GPIO_BAR);
- cs5535_gpio_chip.pdev = pdev;
- spin_lock_init(&cs5535_gpio_chip.lock);
- dev_info(&pdev->dev, "allocated PCI BAR #%d: base 0x%llx\n", GPIO_BAR,
- (unsigned long long) cs5535_gpio_chip.base);
- /* mask out reserved pins */
- mask &= 0x1F7FFFFF;
- /* do not allow pin 28, Power Button, as there's special handling
- * in the PMC needed. (note 12, p. 48) */
- mask &= ~(1 << 28);
- if (mask_orig != mask)
- dev_info(&pdev->dev, "mask changed from 0x%08lX to 0x%08lX\n",
- mask_orig, mask);
- /* finally, register with the generic GPIO API */
- err = gpiochip_add(&cs5535_gpio_chip.chip);
- if (err)
- goto release_region;
- dev_info(&pdev->dev, DRV_NAME ": GPIO support successfully loaded.\n");
- return 0;
- release_region:
- pci_release_region(pdev, GPIO_BAR);
- done:
- return err;
- }
- static void __exit cs5535_gpio_remove(struct pci_dev *pdev)
- {
- int err;
- err = gpiochip_remove(&cs5535_gpio_chip.chip);
- if (err) {
- /* uhh? */
- dev_err(&pdev->dev, "unable to remove gpio_chip?\n");
- }
- pci_release_region(pdev, GPIO_BAR);
- }
- static struct pci_device_id cs5535_gpio_pci_tbl[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_ISA) },
- { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA) },
- { 0, },
- };
- MODULE_DEVICE_TABLE(pci, cs5535_gpio_pci_tbl);
- /*
- * We can't use the standard PCI driver registration stuff here, since
- * that allows only one driver to bind to each PCI device (and we want
- * multiple drivers to be able to bind to the device). Instead, manually
- * scan for the PCI device, request a single region, and keep track of the
- * devices that we're using.
- */
- static int __init cs5535_gpio_scan_pci(void)
- {
- struct pci_dev *pdev;
- int err = -ENODEV;
- int i;
- for (i = 0; i < ARRAY_SIZE(cs5535_gpio_pci_tbl); i++) {
- pdev = pci_get_device(cs5535_gpio_pci_tbl[i].vendor,
- cs5535_gpio_pci_tbl[i].device, NULL);
- if (pdev) {
- err = cs5535_gpio_probe(pdev, &cs5535_gpio_pci_tbl[i]);
- if (err)
- pci_dev_put(pdev);
- /* we only support a single CS5535/6 southbridge */
- break;
- }
- }
- return err;
- }
- static void __exit cs5535_gpio_free_pci(void)
- {
- cs5535_gpio_remove(cs5535_gpio_chip.pdev);
- pci_dev_put(cs5535_gpio_chip.pdev);
- }
- static int __init cs5535_gpio_init(void)
- {
- return cs5535_gpio_scan_pci();
- }
- static void __exit cs5535_gpio_exit(void)
- {
- cs5535_gpio_free_pci();
- }
- module_init(cs5535_gpio_init);
- module_exit(cs5535_gpio_exit);
- MODULE_AUTHOR("Andres Salomon <dilinger@collabora.co.uk>");
- MODULE_DESCRIPTION("AMD CS5535/CS5536 GPIO driver");
- MODULE_LICENSE("GPL");
|