| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166 |
- menuconfig RT2X00
- tristate "Ralink driver support"
- depends on MAC80211 && WLAN_80211
- ---help---
- This will enable the support for the Ralink drivers,
- developed in the rt2x00 project <http://rt2x00.serialmonkey.com>.
- These drivers make use of the mac80211 stack.
- When building one of the individual drivers, the rt2x00 library
- will also be created. That library (when the driver is built as
- a module) will be called rt2x00lib.
- Additionally PCI and USB libraries will also be build depending
- on the types of drivers being selected, these libraries will be
- called rt2x00pci and rt2x00usb.
- if RT2X00
- config RT2400PCI
- tristate "Ralink rt2400 (PCI/PCMCIA) support"
- depends on PCI
- select RT2X00_LIB_PCI
- select EEPROM_93CX6
- ---help---
- This adds support for rt2400 wireless chipset family.
- Supported chips: RT2460.
- When compiled as a module, this driver will be called rt2400pci.
- config RT2500PCI
- tristate "Ralink rt2500 (PCI/PCMCIA) support"
- depends on PCI
- select RT2X00_LIB_PCI
- select EEPROM_93CX6
- ---help---
- This adds support for rt2500 wireless chipset family.
- Supported chips: RT2560.
- When compiled as a module, this driver will be called rt2500pci.
- config RT61PCI
- tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support"
- depends on PCI
- select RT2X00_LIB_PCI
- select RT2X00_LIB_FIRMWARE
- select RT2X00_LIB_CRYPTO
- select CRC_ITU_T
- select EEPROM_93CX6
- ---help---
- This adds support for rt2501 wireless chipset family.
- Supported chips: RT2561, RT2561S & RT2661.
- When compiled as a module, this driver will be called rt61pci.
- config RT2800PCI_PCI
- tristate
- depends on PCI
- default y
- config RT2800PCI_SOC
- tristate
- depends on RALINK_RT288X || RALINK_RT305X
- default y
- config RT2800PCI
- tristate "Ralink rt2800 (PCI/PCMCIA) support"
- depends on (RT2800PCI_PCI || RT2800PCI_SOC) && EXPERIMENTAL
- select RT2X00_LIB_PCI if RT2800PCI_PCI
- select RT2X00_LIB_SOC if RT2800PCI_SOC
- select RT2X00_LIB_HT
- select RT2X00_LIB_FIRMWARE
- select RT2X00_LIB_CRYPTO
- select CRC_CCITT
- select EEPROM_93CX6
- ---help---
- This adds support for rt2800 wireless chipset family.
- Supported chips: RT2760, RT2790, RT2860, RT2880, RT2890 & RT3052
- When compiled as a module, this driver will be called "rt2800pci.ko".
- config RT2500USB
- tristate "Ralink rt2500 (USB) support"
- depends on USB
- select RT2X00_LIB_USB
- select RT2X00_LIB_CRYPTO
- ---help---
- This adds support for rt2500 wireless chipset family.
- Supported chips: RT2571 & RT2572.
- When compiled as a module, this driver will be called rt2500usb.
- config RT73USB
- tristate "Ralink rt2501/rt73 (USB) support"
- depends on USB
- select RT2X00_LIB_USB
- select RT2X00_LIB_FIRMWARE
- select RT2X00_LIB_CRYPTO
- select CRC_ITU_T
- ---help---
- This adds support for rt2501 wireless chipset family.
- Supported chips: RT2571W, RT2573 & RT2671.
- When compiled as a module, this driver will be called rt73usb.
- config RT2800USB
- tristate "Ralink rt2800 (USB) support"
- depends on USB && EXPERIMENTAL
- select RT2X00_LIB_USB
- select RT2X00_LIB_HT
- select RT2X00_LIB_FIRMWARE
- select RT2X00_LIB_CRYPTO
- select CRC_CCITT
- ---help---
- This adds experimental support for rt2800 wireless chipset family.
- Supported chips: RT2770, RT2870 & RT3070.
- When compiled as a module, this driver will be called "rt2800usb.ko".
- config RT2X00_LIB_PCI
- tristate
- select RT2X00_LIB
- config RT2X00_LIB_SOC
- tristate
- select RT2X00_LIB
- config RT2X00_LIB_USB
- tristate
- select RT2X00_LIB
- config RT2X00_LIB
- tristate
- config RT2X00_LIB_HT
- boolean
- config RT2X00_LIB_FIRMWARE
- boolean
- select FW_LOADER
- config RT2X00_LIB_CRYPTO
- boolean
- config RT2X00_LIB_LEDS
- boolean
- default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n)
- comment "rt2x00 leds support disabled due to modularized LEDS_CLASS and built-in rt2x00"
- depends on RT2X00_LIB=y && LEDS_CLASS=m
- config RT2X00_LIB_DEBUGFS
- bool "Ralink debugfs support"
- depends on RT2X00_LIB && MAC80211_DEBUGFS
- ---help---
- Enable creation of debugfs files for the rt2x00 drivers.
- These debugfs files support both reading and writing of the
- most important register types of the rt2x00 hardware.
- config RT2X00_DEBUG
- bool "Ralink debug output"
- depends on RT2X00_LIB
- ---help---
- Enable debugging output for all rt2x00 modules
- endif
|
