| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160 |
- # arch/arm/mach-s3c2410/Kconfig
- #
- # Copyright 2007 Simtec Electronics
- #
- # Licensed under GPLv2
- config CPU_S3C2410
- bool
- depends on ARCH_S3C2410
- select CPU_ARM920T
- select S3C2410_CLOCK
- select S3C2410_GPIO
- select CPU_LLSERIAL_S3C2410
- select S3C2410_PM if PM
- select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
- help
- Support for S3C2410 and S3C2410A family from the S3C24XX line
- of Samsung Mobile CPUs.
- config CPU_S3C2410_DMA
- bool
- depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442)
- default y if CPU_S3C2410 || CPU_S3C2442
- help
- DMA device selection for S3C2410 and compatible CPUs
- config S3C2410_PM
- bool
- help
- Power Management code common to S3C2410 and better
- config S3C2410_GPIO
- bool
- help
- GPIO code for S3C2410 and similar processors
- config SIMTEC_NOR
- bool
- help
- Internal node to specify machine has simtec NOR mapping
- config MACH_BAST_IDE
- bool
- select HAVE_PATA_PLATFORM
- help
- Internal node for machines with an BAST style IDE
- interface
- # cpu frequency scaling support
- config S3C2410_CPUFREQ
- bool
- depends on CPU_FREQ_S3C24XX && CPU_S3C2410
- select S3C2410_CPUFREQ_UTILS
- help
- CPU Frequency scaling support for S3C2410
- config S3C2410_PLLTABLE
- bool
- depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
- default y
- help
- Select the PLL table for the S3C2410
- menu "S3C2410 Machines"
- config ARCH_SMDK2410
- bool "SMDK2410/A9M2410"
- select CPU_S3C2410
- select MACH_SMDK
- help
- Say Y here if you are using the SMDK2410 or the derived module A9M2410
- <http://www.fsforth.de>
- config ARCH_H1940
- bool "IPAQ H1940"
- select CPU_S3C2410
- select PM_H1940 if PM
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the HP IPAQ H1940
- config PM_H1940
- bool
- help
- Internal node for H1940 and related PM
- config MACH_N30
- bool "Acer N30 family"
- select CPU_S3C2410
- select S3C_DEV_USB_HOST
- help
- Say Y here if you want suppt for the Acer N30, Acer N35,
- Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
- config ARCH_BAST
- bool "Simtec Electronics BAST (EB2410ITX)"
- select CPU_S3C2410
- select S3C2410_IOTIMING if S3C2410_CPUFREQ
- select PM_SIMTEC if PM
- select SIMTEC_NOR
- select MACH_BAST_IDE
- select S3C24XX_DCLK
- select ISA
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the Simtec Electronics EB2410ITX
- development board (also known as BAST)
- config MACH_OTOM
- bool "NexVision OTOM Board"
- select CPU_S3C2410
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the Nex Vision OTOM board
- config MACH_AML_M5900
- bool "AML M5900 Series"
- select CPU_S3C2410
- select PM_SIMTEC if PM
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the American Microsystems M5900 Series
- <http://www.amltd.com>
- config BAST_PC104_IRQ
- bool "BAST PC104 IRQ support"
- depends on ARCH_BAST
- default y
- help
- Say Y here to enable the PC104 IRQ routing on the
- Simtec BAST (EB2410ITX)
- config MACH_TCT_HAMMER
- bool "TCT Hammer Board"
- select CPU_S3C2410
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the TinCanTools Hammer Board
- <http://www.tincantools.com>
- config MACH_VR1000
- bool "Thorcom VR1000"
- select PM_SIMTEC if PM
- select S3C24XX_DCLK
- select SIMTEC_NOR
- select MACH_BAST_IDE
- select CPU_S3C2410
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the Thorcom VR1000 board.
- config MACH_QT2410
- bool "QT2410"
- select CPU_S3C2410
- select S3C_DEV_USB_HOST
- help
- Say Y here if you are using the Armzone QT2410
- endmenu
|
