Makefile 42 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282128312841285128612871288128912901291129212931294129512961297129812991300130113021303130413051306130713081309131013111312131313141315131613171318131913201321132213231324132513261327132813291330133113321333133413351336133713381339134013411342134313441345
  1. ifeq ("$(origin O)", "command line")
  2. OUTPUT := $(O)/
  3. endif
  4. # The default target of this Makefile is...
  5. all::
  6. ifneq ($(OUTPUT),)
  7. # check that the output directory actually exists
  8. OUTDIR := $(shell cd $(OUTPUT) && /bin/pwd)
  9. $(if $(OUTDIR),, $(error output directory "$(OUTPUT)" does not exist))
  10. endif
  11. # Define V=1 to have a more verbose compile.
  12. # Define V=2 to have an even more verbose compile.
  13. #
  14. # Define SNPRINTF_RETURNS_BOGUS if your are on a system which snprintf()
  15. # or vsnprintf() return -1 instead of number of characters which would
  16. # have been written to the final string if enough space had been available.
  17. #
  18. # Define FREAD_READS_DIRECTORIES if your are on a system which succeeds
  19. # when attempting to read from an fopen'ed directory.
  20. #
  21. # Define NO_OPENSSL environment variable if you do not have OpenSSL.
  22. # This also implies MOZILLA_SHA1.
  23. #
  24. # Define CURLDIR=/foo/bar if your curl header and library files are in
  25. # /foo/bar/include and /foo/bar/lib directories.
  26. #
  27. # Define EXPATDIR=/foo/bar if your expat header and library files are in
  28. # /foo/bar/include and /foo/bar/lib directories.
  29. #
  30. # Define NO_D_INO_IN_DIRENT if you don't have d_ino in your struct dirent.
  31. #
  32. # Define NO_D_TYPE_IN_DIRENT if your platform defines DT_UNKNOWN but lacks
  33. # d_type in struct dirent (latest Cygwin -- will be fixed soonish).
  34. #
  35. # Define NO_C99_FORMAT if your formatted IO functions (printf/scanf et.al.)
  36. # do not support the 'size specifiers' introduced by C99, namely ll, hh,
  37. # j, z, t. (representing long long int, char, intmax_t, size_t, ptrdiff_t).
  38. # some C compilers supported these specifiers prior to C99 as an extension.
  39. #
  40. # Define NO_STRCASESTR if you don't have strcasestr.
  41. #
  42. # Define NO_MEMMEM if you don't have memmem.
  43. #
  44. # Define NO_STRTOUMAX if you don't have strtoumax in the C library.
  45. # If your compiler also does not support long long or does not have
  46. # strtoull, define NO_STRTOULL.
  47. #
  48. # Define NO_SETENV if you don't have setenv in the C library.
  49. #
  50. # Define NO_UNSETENV if you don't have unsetenv in the C library.
  51. #
  52. # Define NO_MKDTEMP if you don't have mkdtemp in the C library.
  53. #
  54. # Define NO_SYS_SELECT_H if you don't have sys/select.h.
  55. #
  56. # Define NO_SYMLINK_HEAD if you never want .perf/HEAD to be a symbolic link.
  57. # Enable it on Windows. By default, symrefs are still used.
  58. #
  59. # Define NO_SVN_TESTS if you want to skip time-consuming SVN interoperability
  60. # tests. These tests take up a significant amount of the total test time
  61. # but are not needed unless you plan to talk to SVN repos.
  62. #
  63. # Define NO_FINK if you are building on Darwin/Mac OS X, have Fink
  64. # installed in /sw, but don't want PERF to link against any libraries
  65. # installed there. If defined you may specify your own (or Fink's)
  66. # include directories and library directories by defining CFLAGS
  67. # and LDFLAGS appropriately.
  68. #
  69. # Define NO_DARWIN_PORTS if you are building on Darwin/Mac OS X,
  70. # have DarwinPorts installed in /opt/local, but don't want PERF to
  71. # link against any libraries installed there. If defined you may
  72. # specify your own (or DarwinPort's) include directories and
  73. # library directories by defining CFLAGS and LDFLAGS appropriately.
  74. #
  75. # Define PPC_SHA1 environment variable when running make to make use of
  76. # a bundled SHA1 routine optimized for PowerPC.
  77. #
  78. # Define ARM_SHA1 environment variable when running make to make use of
  79. # a bundled SHA1 routine optimized for ARM.
  80. #
  81. # Define MOZILLA_SHA1 environment variable when running make to make use of
  82. # a bundled SHA1 routine coming from Mozilla. It is GPL'd and should be fast
  83. # on non-x86 architectures (e.g. PowerPC), while the OpenSSL version (default
  84. # choice) has very fast version optimized for i586.
  85. #
  86. # Define NEEDS_SSL_WITH_CRYPTO if you need -lcrypto with -lssl (Darwin).
  87. #
  88. # Define NEEDS_LIBICONV if linking with libc is not enough (Darwin).
  89. #
  90. # Define NEEDS_SOCKET if linking with libc is not enough (SunOS,
  91. # Patrick Mauritz).
  92. #
  93. # Define NO_MMAP if you want to avoid mmap.
  94. #
  95. # Define NO_PTHREADS if you do not have or do not want to use Pthreads.
  96. #
  97. # Define NO_PREAD if you have a problem with pread() system call (e.g.
  98. # cygwin.dll before v1.5.22).
  99. #
  100. # Define NO_FAST_WORKING_DIRECTORY if accessing objects in pack files is
  101. # generally faster on your platform than accessing the working directory.
  102. #
  103. # Define NO_TRUSTABLE_FILEMODE if your filesystem may claim to support
  104. # the executable mode bit, but doesn't really do so.
  105. #
  106. # Define NO_IPV6 if you lack IPv6 support and getaddrinfo().
  107. #
  108. # Define NO_SOCKADDR_STORAGE if your platform does not have struct
  109. # sockaddr_storage.
  110. #
  111. # Define NO_ICONV if your libc does not properly support iconv.
  112. #
  113. # Define OLD_ICONV if your library has an old iconv(), where the second
  114. # (input buffer pointer) parameter is declared with type (const char **).
  115. #
  116. # Define NO_DEFLATE_BOUND if your zlib does not have deflateBound.
  117. #
  118. # Define NO_R_TO_GCC_LINKER if your gcc does not like "-R/path/lib"
  119. # that tells runtime paths to dynamic libraries;
  120. # "-Wl,-rpath=/path/lib" is used instead.
  121. #
  122. # Define USE_NSEC below if you want perf to care about sub-second file mtimes
  123. # and ctimes. Note that you need recent glibc (at least 2.2.4) for this, and
  124. # it will BREAK YOUR LOCAL DIFFS! show-diff and anything using it will likely
  125. # randomly break unless your underlying filesystem supports those sub-second
  126. # times (my ext3 doesn't).
  127. #
  128. # Define USE_ST_TIMESPEC if your "struct stat" uses "st_ctimespec" instead of
  129. # "st_ctim"
  130. #
  131. # Define NO_NSEC if your "struct stat" does not have "st_ctim.tv_nsec"
  132. # available. This automatically turns USE_NSEC off.
  133. #
  134. # Define USE_STDEV below if you want perf to care about the underlying device
  135. # change being considered an inode change from the update-index perspective.
  136. #
  137. # Define NO_ST_BLOCKS_IN_STRUCT_STAT if your platform does not have st_blocks
  138. # field that counts the on-disk footprint in 512-byte blocks.
  139. #
  140. # Define ASCIIDOC8 if you want to format documentation with AsciiDoc 8
  141. #
  142. # Define DOCBOOK_XSL_172 if you want to format man pages with DocBook XSL v1.72.
  143. #
  144. # Define NO_PERL_MAKEMAKER if you cannot use Makefiles generated by perl's
  145. # MakeMaker (e.g. using ActiveState under Cygwin).
  146. #
  147. # Define NO_PERL if you do not want Perl scripts or libraries at all.
  148. #
  149. # Define INTERNAL_QSORT to use Git's implementation of qsort(), which
  150. # is a simplified version of the merge sort used in glibc. This is
  151. # recommended if Git triggers O(n^2) behavior in your platform's qsort().
  152. #
  153. # Define NO_EXTERNAL_GREP if you don't want "perf grep" to ever call
  154. # your external grep (e.g., if your system lacks grep, if its grep is
  155. # broken, or spawning external process is slower than built-in grep perf has).
  156. #
  157. # Define LDFLAGS=-static to build a static binary.
  158. #
  159. # Define EXTRA_CFLAGS=-m64 or EXTRA_CFLAGS=-m32 as appropriate for cross-builds.
  160. #
  161. # Define NO_DWARF if you do not want debug-info analysis feature at all.
  162. $(OUTPUT)PERF-VERSION-FILE: .FORCE-PERF-VERSION-FILE
  163. @$(SHELL_PATH) util/PERF-VERSION-GEN $(OUTPUT)
  164. -include $(OUTPUT)PERF-VERSION-FILE
  165. uname_S := $(shell sh -c 'uname -s 2>/dev/null || echo not')
  166. uname_M := $(shell sh -c 'uname -m 2>/dev/null || echo not')
  167. uname_O := $(shell sh -c 'uname -o 2>/dev/null || echo not')
  168. uname_R := $(shell sh -c 'uname -r 2>/dev/null || echo not')
  169. uname_P := $(shell sh -c 'uname -p 2>/dev/null || echo not')
  170. uname_V := $(shell sh -c 'uname -v 2>/dev/null || echo not')
  171. ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
  172. -e s/arm.*/arm/ -e s/sa110/arm/ \
  173. -e s/s390x/s390/ -e s/parisc64/parisc/ \
  174. -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
  175. -e s/sh[234].*/sh/ )
  176. # Additional ARCH settings for x86
  177. ifeq ($(ARCH),i386)
  178. ARCH := x86
  179. endif
  180. ifeq ($(ARCH),x86_64)
  181. RAW_ARCH := x86_64
  182. ARCH := x86
  183. ARCH_CFLAGS := -DARCH_X86_64
  184. ARCH_INCLUDE = ../../arch/x86/lib/memcpy_64.S
  185. endif
  186. # CFLAGS and LDFLAGS are for the users to override from the command line.
  187. #
  188. # Include saner warnings here, which can catch bugs:
  189. #
  190. EXTRA_WARNINGS := -Wformat
  191. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wformat-security
  192. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wformat-y2k
  193. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wshadow
  194. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Winit-self
  195. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wpacked
  196. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wredundant-decls
  197. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wstrict-aliasing=3
  198. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wswitch-default
  199. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wswitch-enum
  200. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wno-system-headers
  201. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wundef
  202. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wwrite-strings
  203. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wbad-function-cast
  204. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wmissing-declarations
  205. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wmissing-prototypes
  206. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wnested-externs
  207. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wold-style-definition
  208. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wstrict-prototypes
  209. EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wdeclaration-after-statement
  210. ifeq ("$(origin DEBUG)", "command line")
  211. PERF_DEBUG = $(DEBUG)
  212. endif
  213. ifndef PERF_DEBUG
  214. CFLAGS_OPTIMIZE = -O6
  215. endif
  216. CFLAGS = -fno-omit-frame-pointer -ggdb3 -Wall -Wextra -std=gnu99 -Werror $(CFLAGS_OPTIMIZE) -D_FORTIFY_SOURCE=2 $(EXTRA_WARNINGS) $(EXTRA_CFLAGS)
  217. EXTLIBS = -lpthread -lrt -lelf -lm
  218. ALL_CFLAGS = $(CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
  219. ALL_LDFLAGS = $(LDFLAGS)
  220. STRIP ?= strip
  221. # Among the variables below, these:
  222. # perfexecdir
  223. # template_dir
  224. # mandir
  225. # infodir
  226. # htmldir
  227. # ETC_PERFCONFIG (but not sysconfdir)
  228. # can be specified as a relative path some/where/else;
  229. # this is interpreted as relative to $(prefix) and "perf" at
  230. # runtime figures out where they are based on the path to the executable.
  231. # This can help installing the suite in a relocatable way.
  232. # Make the path relative to DESTDIR, not to prefix
  233. ifndef DESTDIR
  234. prefix = $(HOME)
  235. endif
  236. bindir_relative = bin
  237. bindir = $(prefix)/$(bindir_relative)
  238. mandir = share/man
  239. infodir = share/info
  240. perfexecdir = libexec/perf-core
  241. sharedir = $(prefix)/share
  242. template_dir = share/perf-core/templates
  243. htmldir = share/doc/perf-doc
  244. ifeq ($(prefix),/usr)
  245. sysconfdir = /etc
  246. ETC_PERFCONFIG = $(sysconfdir)/perfconfig
  247. else
  248. sysconfdir = $(prefix)/etc
  249. ETC_PERFCONFIG = etc/perfconfig
  250. endif
  251. lib = lib
  252. export prefix bindir sharedir sysconfdir
  253. CC = $(CROSS_COMPILE)gcc
  254. AR = $(CROSS_COMPILE)ar
  255. RM = rm -f
  256. MKDIR = mkdir
  257. TAR = tar
  258. FIND = find
  259. INSTALL = install
  260. RPMBUILD = rpmbuild
  261. PTHREAD_LIBS = -lpthread
  262. # sparse is architecture-neutral, which means that we need to tell it
  263. # explicitly what architecture to check for. Fix this up for yours..
  264. SPARSE_FLAGS = -D__BIG_ENDIAN__ -D__powerpc__
  265. ifeq ($(V), 2)
  266. QUIET_STDERR = ">/dev/null"
  267. else
  268. QUIET_STDERR = ">/dev/null 2>&1"
  269. endif
  270. -include feature-tests.mak
  271. ifeq ($(call try-cc,$(SOURCE_HELLO),-Werror -fstack-protector-all),y)
  272. CFLAGS := $(CFLAGS) -fstack-protector-all
  273. endif
  274. ifeq ($(call try-cc,$(SOURCE_HELLO),-Werror -Wstack-protector),y)
  275. CFLAGS := $(CFLAGS) -Wstack-protector
  276. endif
  277. ifeq ($(call try-cc,$(SOURCE_HELLO),-Werror -Wvolatile-register-var),y)
  278. CFLAGS := $(CFLAGS) -Wvolatile-register-var
  279. endif
  280. ### --- END CONFIGURATION SECTION ---
  281. # Those must not be GNU-specific; they are shared with perl/ which may
  282. # be built by a different compiler. (Note that this is an artifact now
  283. # but it still might be nice to keep that distinction.)
  284. BASIC_CFLAGS = -Iutil/include -Iarch/$(ARCH)/include
  285. BASIC_LDFLAGS =
  286. # Guard against environment variables
  287. BUILTIN_OBJS =
  288. BUILT_INS =
  289. COMPAT_CFLAGS =
  290. COMPAT_OBJS =
  291. LIB_H =
  292. LIB_OBJS =
  293. PYRF_OBJS =
  294. SCRIPT_PERL =
  295. SCRIPT_SH =
  296. TEST_PROGRAMS =
  297. SCRIPT_SH += perf-archive.sh
  298. grep-libs = $(filter -l%,$(1))
  299. strip-libs = $(filter-out -l%,$(1))
  300. $(OUTPUT)python/perf.so: $(PYRF_OBJS)
  301. $(QUIET_GEN)python util/setup.py --quiet build_ext --build-lib='$(OUTPUT)python' \
  302. --build-temp='$(OUTPUT)python/temp'
  303. #
  304. # No Perl scripts right now:
  305. #
  306. # SCRIPT_PERL += perf-add--interactive.perl
  307. SCRIPTS = $(patsubst %.sh,%,$(SCRIPT_SH)) \
  308. $(patsubst %.perl,%,$(SCRIPT_PERL))
  309. # Empty...
  310. EXTRA_PROGRAMS =
  311. # ... and all the rest that could be moved out of bindir to perfexecdir
  312. PROGRAMS += $(EXTRA_PROGRAMS)
  313. #
  314. # Single 'perf' binary right now:
  315. #
  316. PROGRAMS += $(OUTPUT)perf
  317. LANG_BINDINGS =
  318. # List built-in command $C whose implementation cmd_$C() is not in
  319. # builtin-$C.o but is linked in as part of some other command.
  320. #
  321. # what 'all' will build and 'install' will install, in perfexecdir
  322. ALL_PROGRAMS = $(PROGRAMS) $(SCRIPTS)
  323. # what 'all' will build but not install in perfexecdir
  324. OTHER_PROGRAMS = $(OUTPUT)perf$X
  325. # Set paths to tools early so that they can be used for version tests.
  326. ifndef SHELL_PATH
  327. SHELL_PATH = /bin/sh
  328. endif
  329. ifndef PERL_PATH
  330. PERL_PATH = /usr/bin/perl
  331. endif
  332. export PERL_PATH
  333. LIB_FILE=$(OUTPUT)libperf.a
  334. LIB_H += ../../include/linux/perf_event.h
  335. LIB_H += ../../include/linux/rbtree.h
  336. LIB_H += ../../include/linux/list.h
  337. LIB_H += ../../include/linux/hash.h
  338. LIB_H += ../../include/linux/stringify.h
  339. LIB_H += util/include/linux/bitmap.h
  340. LIB_H += util/include/linux/bitops.h
  341. LIB_H += util/include/linux/compiler.h
  342. LIB_H += util/include/linux/ctype.h
  343. LIB_H += util/include/linux/kernel.h
  344. LIB_H += util/include/linux/list.h
  345. LIB_H += util/include/linux/module.h
  346. LIB_H += util/include/linux/poison.h
  347. LIB_H += util/include/linux/prefetch.h
  348. LIB_H += util/include/linux/rbtree.h
  349. LIB_H += util/include/linux/string.h
  350. LIB_H += util/include/linux/types.h
  351. LIB_H += util/include/linux/linkage.h
  352. LIB_H += util/include/asm/asm-offsets.h
  353. LIB_H += util/include/asm/bug.h
  354. LIB_H += util/include/asm/byteorder.h
  355. LIB_H += util/include/asm/hweight.h
  356. LIB_H += util/include/asm/swab.h
  357. LIB_H += util/include/asm/system.h
  358. LIB_H += util/include/asm/uaccess.h
  359. LIB_H += util/include/dwarf-regs.h
  360. LIB_H += util/include/asm/dwarf2.h
  361. LIB_H += util/include/asm/cpufeature.h
  362. LIB_H += perf.h
  363. LIB_H += util/annotate.h
  364. LIB_H += util/cache.h
  365. LIB_H += util/callchain.h
  366. LIB_H += util/build-id.h
  367. LIB_H += util/debug.h
  368. LIB_H += util/debugfs.h
  369. LIB_H += util/event.h
  370. LIB_H += util/evsel.h
  371. LIB_H += util/evlist.h
  372. LIB_H += util/exec_cmd.h
  373. LIB_H += util/types.h
  374. LIB_H += util/levenshtein.h
  375. LIB_H += util/map.h
  376. LIB_H += util/parse-options.h
  377. LIB_H += util/parse-events.h
  378. LIB_H += util/quote.h
  379. LIB_H += util/util.h
  380. LIB_H += util/xyarray.h
  381. LIB_H += util/header.h
  382. LIB_H += util/help.h
  383. LIB_H += util/session.h
  384. LIB_H += util/strbuf.h
  385. LIB_H += util/strlist.h
  386. LIB_H += util/strfilter.h
  387. LIB_H += util/svghelper.h
  388. LIB_H += util/run-command.h
  389. LIB_H += util/sigchain.h
  390. LIB_H += util/symbol.h
  391. LIB_H += util/color.h
  392. LIB_H += util/values.h
  393. LIB_H += util/sort.h
  394. LIB_H += util/hist.h
  395. LIB_H += util/thread.h
  396. LIB_H += util/thread_map.h
  397. LIB_H += util/trace-event.h
  398. LIB_H += util/probe-finder.h
  399. LIB_H += util/probe-event.h
  400. LIB_H += util/pstack.h
  401. LIB_H += util/cpumap.h
  402. LIB_H += util/top.h
  403. LIB_H += $(ARCH_INCLUDE)
  404. LIB_H += util/cgroup.h
  405. LIB_OBJS += $(OUTPUT)util/abspath.o
  406. LIB_OBJS += $(OUTPUT)util/alias.o
  407. LIB_OBJS += $(OUTPUT)util/annotate.o
  408. LIB_OBJS += $(OUTPUT)util/build-id.o
  409. LIB_OBJS += $(OUTPUT)util/config.o
  410. LIB_OBJS += $(OUTPUT)util/ctype.o
  411. LIB_OBJS += $(OUTPUT)util/debugfs.o
  412. LIB_OBJS += $(OUTPUT)util/environment.o
  413. LIB_OBJS += $(OUTPUT)util/event.o
  414. LIB_OBJS += $(OUTPUT)util/evlist.o
  415. LIB_OBJS += $(OUTPUT)util/evsel.o
  416. LIB_OBJS += $(OUTPUT)util/exec_cmd.o
  417. LIB_OBJS += $(OUTPUT)util/help.o
  418. LIB_OBJS += $(OUTPUT)util/levenshtein.o
  419. LIB_OBJS += $(OUTPUT)util/parse-options.o
  420. LIB_OBJS += $(OUTPUT)util/parse-events.o
  421. LIB_OBJS += $(OUTPUT)util/path.o
  422. LIB_OBJS += $(OUTPUT)util/rbtree.o
  423. LIB_OBJS += $(OUTPUT)util/bitmap.o
  424. LIB_OBJS += $(OUTPUT)util/hweight.o
  425. LIB_OBJS += $(OUTPUT)util/run-command.o
  426. LIB_OBJS += $(OUTPUT)util/quote.o
  427. LIB_OBJS += $(OUTPUT)util/strbuf.o
  428. LIB_OBJS += $(OUTPUT)util/string.o
  429. LIB_OBJS += $(OUTPUT)util/strlist.o
  430. LIB_OBJS += $(OUTPUT)util/strfilter.o
  431. LIB_OBJS += $(OUTPUT)util/top.o
  432. LIB_OBJS += $(OUTPUT)util/usage.o
  433. LIB_OBJS += $(OUTPUT)util/wrapper.o
  434. LIB_OBJS += $(OUTPUT)util/sigchain.o
  435. LIB_OBJS += $(OUTPUT)util/symbol.o
  436. LIB_OBJS += $(OUTPUT)util/color.o
  437. LIB_OBJS += $(OUTPUT)util/pager.o
  438. LIB_OBJS += $(OUTPUT)util/header.o
  439. LIB_OBJS += $(OUTPUT)util/callchain.o
  440. LIB_OBJS += $(OUTPUT)util/values.o
  441. LIB_OBJS += $(OUTPUT)util/debug.o
  442. LIB_OBJS += $(OUTPUT)util/map.o
  443. LIB_OBJS += $(OUTPUT)util/pstack.o
  444. LIB_OBJS += $(OUTPUT)util/session.o
  445. LIB_OBJS += $(OUTPUT)util/thread.o
  446. LIB_OBJS += $(OUTPUT)util/thread_map.o
  447. LIB_OBJS += $(OUTPUT)util/trace-event-parse.o
  448. LIB_OBJS += $(OUTPUT)util/trace-event-read.o
  449. LIB_OBJS += $(OUTPUT)util/trace-event-info.o
  450. LIB_OBJS += $(OUTPUT)util/trace-event-scripting.o
  451. LIB_OBJS += $(OUTPUT)util/svghelper.o
  452. LIB_OBJS += $(OUTPUT)util/sort.o
  453. LIB_OBJS += $(OUTPUT)util/hist.o
  454. LIB_OBJS += $(OUTPUT)util/probe-event.o
  455. LIB_OBJS += $(OUTPUT)util/util.o
  456. LIB_OBJS += $(OUTPUT)util/xyarray.o
  457. LIB_OBJS += $(OUTPUT)util/cpumap.o
  458. LIB_OBJS += $(OUTPUT)util/cgroup.o
  459. BUILTIN_OBJS += $(OUTPUT)builtin-annotate.o
  460. BUILTIN_OBJS += $(OUTPUT)builtin-bench.o
  461. # Benchmark modules
  462. BUILTIN_OBJS += $(OUTPUT)bench/sched-messaging.o
  463. BUILTIN_OBJS += $(OUTPUT)bench/sched-pipe.o
  464. ifeq ($(RAW_ARCH),x86_64)
  465. BUILTIN_OBJS += $(OUTPUT)bench/mem-memcpy-x86-64-asm.o
  466. endif
  467. BUILTIN_OBJS += $(OUTPUT)bench/mem-memcpy.o
  468. BUILTIN_OBJS += $(OUTPUT)builtin-diff.o
  469. BUILTIN_OBJS += $(OUTPUT)builtin-help.o
  470. BUILTIN_OBJS += $(OUTPUT)builtin-sched.o
  471. BUILTIN_OBJS += $(OUTPUT)builtin-buildid-list.o
  472. BUILTIN_OBJS += $(OUTPUT)builtin-buildid-cache.o
  473. BUILTIN_OBJS += $(OUTPUT)builtin-list.o
  474. BUILTIN_OBJS += $(OUTPUT)builtin-record.o
  475. BUILTIN_OBJS += $(OUTPUT)builtin-report.o
  476. BUILTIN_OBJS += $(OUTPUT)builtin-stat.o
  477. BUILTIN_OBJS += $(OUTPUT)builtin-timechart.o
  478. BUILTIN_OBJS += $(OUTPUT)builtin-top.o
  479. BUILTIN_OBJS += $(OUTPUT)builtin-script.o
  480. BUILTIN_OBJS += $(OUTPUT)builtin-probe.o
  481. BUILTIN_OBJS += $(OUTPUT)builtin-kmem.o
  482. BUILTIN_OBJS += $(OUTPUT)builtin-lock.o
  483. BUILTIN_OBJS += $(OUTPUT)builtin-kvm.o
  484. BUILTIN_OBJS += $(OUTPUT)builtin-test.o
  485. BUILTIN_OBJS += $(OUTPUT)builtin-inject.o
  486. PERFLIBS = $(LIB_FILE)
  487. # Files needed for the python binding, perf.so
  488. # pyrf is just an internal name needed for all those wrappers.
  489. # This has to be in sync with what is in the 'sources' variable in
  490. # tools/perf/util/setup.py
  491. PYRF_OBJS += $(OUTPUT)util/cpumap.o
  492. PYRF_OBJS += $(OUTPUT)util/ctype.o
  493. PYRF_OBJS += $(OUTPUT)util/evlist.o
  494. PYRF_OBJS += $(OUTPUT)util/evsel.o
  495. PYRF_OBJS += $(OUTPUT)util/python.o
  496. PYRF_OBJS += $(OUTPUT)util/thread_map.o
  497. PYRF_OBJS += $(OUTPUT)util/util.o
  498. PYRF_OBJS += $(OUTPUT)util/xyarray.o
  499. #
  500. # Platform specific tweaks
  501. #
  502. # We choose to avoid "if .. else if .. else .. endif endif"
  503. # because maintaining the nesting to match is a pain. If
  504. # we had "elif" things would have been much nicer...
  505. -include config.mak.autogen
  506. -include config.mak
  507. ifndef NO_DWARF
  508. FLAGS_DWARF=$(ALL_CFLAGS) -ldw -lelf $(ALL_LDFLAGS) $(EXTLIBS)
  509. ifneq ($(call try-cc,$(SOURCE_DWARF),$(FLAGS_DWARF)),y)
  510. msg := $(warning No libdw.h found or old libdw.h found or elfutils is older than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev);
  511. NO_DWARF := 1
  512. endif # Dwarf support
  513. endif # NO_DWARF
  514. -include arch/$(ARCH)/Makefile
  515. ifeq ($(uname_S),Darwin)
  516. ifndef NO_FINK
  517. ifeq ($(shell test -d /sw/lib && echo y),y)
  518. BASIC_CFLAGS += -I/sw/include
  519. BASIC_LDFLAGS += -L/sw/lib
  520. endif
  521. endif
  522. ifndef NO_DARWIN_PORTS
  523. ifeq ($(shell test -d /opt/local/lib && echo y),y)
  524. BASIC_CFLAGS += -I/opt/local/include
  525. BASIC_LDFLAGS += -L/opt/local/lib
  526. endif
  527. endif
  528. PTHREAD_LIBS =
  529. endif
  530. ifneq ($(OUTPUT),)
  531. BASIC_CFLAGS += -I$(OUTPUT)
  532. endif
  533. FLAGS_LIBELF=$(ALL_CFLAGS) $(ALL_LDFLAGS) $(EXTLIBS)
  534. ifneq ($(call try-cc,$(SOURCE_LIBELF),$(FLAGS_LIBELF)),y)
  535. FLAGS_GLIBC=$(ALL_CFLAGS) $(ALL_LDFLAGS)
  536. ifneq ($(call try-cc,$(SOURCE_GLIBC),$(FLAGS_GLIBC)),y)
  537. msg := $(error No gnu/libc-version.h found, please install glibc-dev[el]/glibc-static);
  538. else
  539. msg := $(error No libelf.h/libelf found, please install libelf-dev/elfutils-libelf-devel);
  540. endif
  541. endif
  542. ifneq ($(call try-cc,$(SOURCE_ELF_MMAP),$(FLAGS_COMMON)),y)
  543. BASIC_CFLAGS += -DLIBELF_NO_MMAP
  544. endif
  545. ifndef NO_DWARF
  546. ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined)
  547. msg := $(warning DWARF register mappings have not been defined for architecture $(ARCH), DWARF support disabled);
  548. else
  549. BASIC_CFLAGS += -DDWARF_SUPPORT
  550. EXTLIBS += -lelf -ldw
  551. LIB_OBJS += $(OUTPUT)util/probe-finder.o
  552. endif # PERF_HAVE_DWARF_REGS
  553. endif # NO_DWARF
  554. ifdef NO_NEWT
  555. BASIC_CFLAGS += -DNO_NEWT_SUPPORT
  556. else
  557. FLAGS_NEWT=$(ALL_CFLAGS) $(ALL_LDFLAGS) $(EXTLIBS) -lnewt
  558. ifneq ($(call try-cc,$(SOURCE_NEWT),$(FLAGS_NEWT)),y)
  559. msg := $(warning newt not found, disables TUI support. Please install newt-devel or libnewt-dev);
  560. BASIC_CFLAGS += -DNO_NEWT_SUPPORT
  561. else
  562. # Fedora has /usr/include/slang/slang.h, but ubuntu /usr/include/slang.h
  563. BASIC_CFLAGS += -I/usr/include/slang
  564. EXTLIBS += -lnewt -lslang
  565. LIB_OBJS += $(OUTPUT)util/ui/setup.o
  566. LIB_OBJS += $(OUTPUT)util/ui/browser.o
  567. LIB_OBJS += $(OUTPUT)util/ui/browsers/annotate.o
  568. LIB_OBJS += $(OUTPUT)util/ui/browsers/hists.o
  569. LIB_OBJS += $(OUTPUT)util/ui/browsers/map.o
  570. LIB_OBJS += $(OUTPUT)util/ui/browsers/top.o
  571. LIB_OBJS += $(OUTPUT)util/ui/helpline.o
  572. LIB_OBJS += $(OUTPUT)util/ui/progress.o
  573. LIB_OBJS += $(OUTPUT)util/ui/util.o
  574. LIB_H += util/ui/browser.h
  575. LIB_H += util/ui/browsers/map.h
  576. LIB_H += util/ui/helpline.h
  577. LIB_H += util/ui/libslang.h
  578. LIB_H += util/ui/progress.h
  579. LIB_H += util/ui/util.h
  580. endif
  581. endif
  582. ifdef NO_LIBPERL
  583. BASIC_CFLAGS += -DNO_LIBPERL
  584. else
  585. PERL_EMBED_LDOPTS = $(shell perl -MExtUtils::Embed -e ldopts 2>/dev/null)
  586. PERL_EMBED_LDFLAGS = $(call strip-libs,$(PERL_EMBED_LDOPTS))
  587. PERL_EMBED_LIBADD = $(call grep-libs,$(PERL_EMBED_LDOPTS))
  588. PERL_EMBED_CCOPTS = `perl -MExtUtils::Embed -e ccopts 2>/dev/null`
  589. FLAGS_PERL_EMBED=$(PERL_EMBED_CCOPTS) $(PERL_EMBED_LDOPTS)
  590. ifneq ($(call try-cc,$(SOURCE_PERL_EMBED),$(FLAGS_PERL_EMBED)),y)
  591. BASIC_CFLAGS += -DNO_LIBPERL
  592. else
  593. ALL_LDFLAGS += $(PERL_EMBED_LDFLAGS)
  594. EXTLIBS += $(PERL_EMBED_LIBADD)
  595. LIB_OBJS += $(OUTPUT)util/scripting-engines/trace-event-perl.o
  596. LIB_OBJS += $(OUTPUT)scripts/perl/Perf-Trace-Util/Context.o
  597. endif
  598. endif
  599. ifdef NO_LIBPYTHON
  600. BASIC_CFLAGS += -DNO_LIBPYTHON
  601. else
  602. PYTHON_EMBED_LDOPTS = $(shell python-config --ldflags 2>/dev/null)
  603. PYTHON_EMBED_LDFLAGS = $(call strip-libs,$(PYTHON_EMBED_LDOPTS))
  604. PYTHON_EMBED_LIBADD = $(call grep-libs,$(PYTHON_EMBED_LDOPTS))
  605. PYTHON_EMBED_CCOPTS = `python-config --cflags 2>/dev/null`
  606. FLAGS_PYTHON_EMBED=$(PYTHON_EMBED_CCOPTS) $(PYTHON_EMBED_LDOPTS)
  607. ifneq ($(call try-cc,$(SOURCE_PYTHON_EMBED),$(FLAGS_PYTHON_EMBED)),y)
  608. msg := $(warning No Python.h found, install python-dev[el] to have python support in 'perf script' and to build the python bindings)
  609. BASIC_CFLAGS += -DNO_LIBPYTHON
  610. else
  611. ALL_LDFLAGS += $(PYTHON_EMBED_LDFLAGS)
  612. EXTLIBS += $(PYTHON_EMBED_LIBADD)
  613. LIB_OBJS += $(OUTPUT)util/scripting-engines/trace-event-python.o
  614. LIB_OBJS += $(OUTPUT)scripts/python/Perf-Trace-Util/Context.o
  615. LANG_BINDINGS += $(OUTPUT)python/perf.so
  616. endif
  617. endif
  618. ifdef NO_DEMANGLE
  619. BASIC_CFLAGS += -DNO_DEMANGLE
  620. else
  621. ifdef HAVE_CPLUS_DEMANGLE
  622. EXTLIBS += -liberty
  623. BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
  624. else
  625. FLAGS_BFD=$(ALL_CFLAGS) $(ALL_LDFLAGS) $(EXTLIBS) -lbfd
  626. has_bfd := $(call try-cc,$(SOURCE_BFD),$(FLAGS_BFD))
  627. ifeq ($(has_bfd),y)
  628. EXTLIBS += -lbfd
  629. else
  630. FLAGS_BFD_IBERTY=$(FLAGS_BFD) -liberty
  631. has_bfd_iberty := $(call try-cc,$(SOURCE_BFD),$(FLAGS_BFD_IBERTY))
  632. ifeq ($(has_bfd_iberty),y)
  633. EXTLIBS += -lbfd -liberty
  634. else
  635. FLAGS_BFD_IBERTY_Z=$(FLAGS_BFD_IBERTY) -lz
  636. has_bfd_iberty_z := $(call try-cc,$(SOURCE_BFD),$(FLAGS_BFD_IBERTY_Z))
  637. ifeq ($(has_bfd_iberty_z),y)
  638. EXTLIBS += -lbfd -liberty -lz
  639. else
  640. FLAGS_CPLUS_DEMANGLE=$(ALL_CFLAGS) $(ALL_LDFLAGS) $(EXTLIBS) -liberty
  641. has_cplus_demangle := $(call try-cc,$(SOURCE_CPLUS_DEMANGLE),$(FLAGS_CPLUS_DEMANGLE))
  642. ifeq ($(has_cplus_demangle),y)
  643. EXTLIBS += -liberty
  644. BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
  645. else
  646. msg := $(warning No bfd.h/libbfd found, install binutils-dev[el]/zlib-static to gain symbol demangling)
  647. BASIC_CFLAGS += -DNO_DEMANGLE
  648. endif
  649. endif
  650. endif
  651. endif
  652. endif
  653. endif
  654. ifdef NO_STRLCPY
  655. BASIC_CFLAGS += -DNO_STRLCPY
  656. else
  657. ifneq ($(call try-cc,$(SOURCE_STRLCPY),),y)
  658. BASIC_CFLAGS += -DNO_STRLCPY
  659. endif
  660. endif
  661. ifndef CC_LD_DYNPATH
  662. ifdef NO_R_TO_GCC_LINKER
  663. # Some gcc does not accept and pass -R to the linker to specify
  664. # the runtime dynamic library path.
  665. CC_LD_DYNPATH = -Wl,-rpath,
  666. else
  667. CC_LD_DYNPATH = -R
  668. endif
  669. endif
  670. ifdef NEEDS_SOCKET
  671. EXTLIBS += -lsocket
  672. endif
  673. ifdef NEEDS_NSL
  674. EXTLIBS += -lnsl
  675. endif
  676. ifdef NO_D_TYPE_IN_DIRENT
  677. BASIC_CFLAGS += -DNO_D_TYPE_IN_DIRENT
  678. endif
  679. ifdef NO_D_INO_IN_DIRENT
  680. BASIC_CFLAGS += -DNO_D_INO_IN_DIRENT
  681. endif
  682. ifdef NO_ST_BLOCKS_IN_STRUCT_STAT
  683. BASIC_CFLAGS += -DNO_ST_BLOCKS_IN_STRUCT_STAT
  684. endif
  685. ifdef USE_NSEC
  686. BASIC_CFLAGS += -DUSE_NSEC
  687. endif
  688. ifdef USE_ST_TIMESPEC
  689. BASIC_CFLAGS += -DUSE_ST_TIMESPEC
  690. endif
  691. ifdef NO_NSEC
  692. BASIC_CFLAGS += -DNO_NSEC
  693. endif
  694. ifdef NO_C99_FORMAT
  695. BASIC_CFLAGS += -DNO_C99_FORMAT
  696. endif
  697. ifdef SNPRINTF_RETURNS_BOGUS
  698. COMPAT_CFLAGS += -DSNPRINTF_RETURNS_BOGUS
  699. COMPAT_OBJS += $(OUTPUT)compat/snprintf.o
  700. endif
  701. ifdef FREAD_READS_DIRECTORIES
  702. COMPAT_CFLAGS += -DFREAD_READS_DIRECTORIES
  703. COMPAT_OBJS += $(OUTPUT)compat/fopen.o
  704. endif
  705. ifdef NO_SYMLINK_HEAD
  706. BASIC_CFLAGS += -DNO_SYMLINK_HEAD
  707. endif
  708. ifdef NO_STRCASESTR
  709. COMPAT_CFLAGS += -DNO_STRCASESTR
  710. COMPAT_OBJS += $(OUTPUT)compat/strcasestr.o
  711. endif
  712. ifdef NO_STRTOUMAX
  713. COMPAT_CFLAGS += -DNO_STRTOUMAX
  714. COMPAT_OBJS += $(OUTPUT)compat/strtoumax.o
  715. endif
  716. ifdef NO_STRTOULL
  717. COMPAT_CFLAGS += -DNO_STRTOULL
  718. endif
  719. ifdef NO_SETENV
  720. COMPAT_CFLAGS += -DNO_SETENV
  721. COMPAT_OBJS += $(OUTPUT)compat/setenv.o
  722. endif
  723. ifdef NO_MKDTEMP
  724. COMPAT_CFLAGS += -DNO_MKDTEMP
  725. COMPAT_OBJS += $(OUTPUT)compat/mkdtemp.o
  726. endif
  727. ifdef NO_UNSETENV
  728. COMPAT_CFLAGS += -DNO_UNSETENV
  729. COMPAT_OBJS += $(OUTPUT)compat/unsetenv.o
  730. endif
  731. ifdef NO_SYS_SELECT_H
  732. BASIC_CFLAGS += -DNO_SYS_SELECT_H
  733. endif
  734. ifdef NO_MMAP
  735. COMPAT_CFLAGS += -DNO_MMAP
  736. COMPAT_OBJS += $(OUTPUT)compat/mmap.o
  737. else
  738. ifdef USE_WIN32_MMAP
  739. COMPAT_CFLAGS += -DUSE_WIN32_MMAP
  740. COMPAT_OBJS += $(OUTPUT)compat/win32mmap.o
  741. endif
  742. endif
  743. ifdef NO_PREAD
  744. COMPAT_CFLAGS += -DNO_PREAD
  745. COMPAT_OBJS += $(OUTPUT)compat/pread.o
  746. endif
  747. ifdef NO_FAST_WORKING_DIRECTORY
  748. BASIC_CFLAGS += -DNO_FAST_WORKING_DIRECTORY
  749. endif
  750. ifdef NO_TRUSTABLE_FILEMODE
  751. BASIC_CFLAGS += -DNO_TRUSTABLE_FILEMODE
  752. endif
  753. ifdef NO_IPV6
  754. BASIC_CFLAGS += -DNO_IPV6
  755. endif
  756. ifdef NO_UINTMAX_T
  757. BASIC_CFLAGS += -Duintmax_t=uint32_t
  758. endif
  759. ifdef NO_SOCKADDR_STORAGE
  760. ifdef NO_IPV6
  761. BASIC_CFLAGS += -Dsockaddr_storage=sockaddr_in
  762. else
  763. BASIC_CFLAGS += -Dsockaddr_storage=sockaddr_in6
  764. endif
  765. endif
  766. ifdef NO_INET_NTOP
  767. LIB_OBJS += $(OUTPUT)compat/inet_ntop.o
  768. endif
  769. ifdef NO_INET_PTON
  770. LIB_OBJS += $(OUTPUT)compat/inet_pton.o
  771. endif
  772. ifdef NO_ICONV
  773. BASIC_CFLAGS += -DNO_ICONV
  774. endif
  775. ifdef OLD_ICONV
  776. BASIC_CFLAGS += -DOLD_ICONV
  777. endif
  778. ifdef NO_DEFLATE_BOUND
  779. BASIC_CFLAGS += -DNO_DEFLATE_BOUND
  780. endif
  781. ifdef PPC_SHA1
  782. SHA1_HEADER = "ppc/sha1.h"
  783. LIB_OBJS += $(OUTPUT)ppc/sha1.o ppc/sha1ppc.o
  784. else
  785. ifdef ARM_SHA1
  786. SHA1_HEADER = "arm/sha1.h"
  787. LIB_OBJS += $(OUTPUT)arm/sha1.o $(OUTPUT)arm/sha1_arm.o
  788. else
  789. ifdef MOZILLA_SHA1
  790. SHA1_HEADER = "mozilla-sha1/sha1.h"
  791. LIB_OBJS += $(OUTPUT)mozilla-sha1/sha1.o
  792. else
  793. SHA1_HEADER = <openssl/sha.h>
  794. EXTLIBS += $(LIB_4_CRYPTO)
  795. endif
  796. endif
  797. endif
  798. ifdef NO_PERL_MAKEMAKER
  799. export NO_PERL_MAKEMAKER
  800. endif
  801. ifdef NO_HSTRERROR
  802. COMPAT_CFLAGS += -DNO_HSTRERROR
  803. COMPAT_OBJS += $(OUTPUT)compat/hstrerror.o
  804. endif
  805. ifdef NO_MEMMEM
  806. COMPAT_CFLAGS += -DNO_MEMMEM
  807. COMPAT_OBJS += $(OUTPUT)compat/memmem.o
  808. endif
  809. ifdef INTERNAL_QSORT
  810. COMPAT_CFLAGS += -DINTERNAL_QSORT
  811. COMPAT_OBJS += $(OUTPUT)compat/qsort.o
  812. endif
  813. ifdef RUNTIME_PREFIX
  814. COMPAT_CFLAGS += -DRUNTIME_PREFIX
  815. endif
  816. ifdef DIR_HAS_BSD_GROUP_SEMANTICS
  817. COMPAT_CFLAGS += -DDIR_HAS_BSD_GROUP_SEMANTICS
  818. endif
  819. ifdef NO_EXTERNAL_GREP
  820. BASIC_CFLAGS += -DNO_EXTERNAL_GREP
  821. endif
  822. ifeq ($(PERL_PATH),)
  823. NO_PERL=NoThanks
  824. endif
  825. QUIET_SUBDIR0 = +$(MAKE) -C # space to separate -C and subdir
  826. QUIET_SUBDIR1 =
  827. ifneq ($(findstring $(MAKEFLAGS),w),w)
  828. PRINT_DIR = --no-print-directory
  829. else # "make -w"
  830. NO_SUBDIR = :
  831. endif
  832. ifneq ($(findstring $(MAKEFLAGS),s),s)
  833. ifndef V
  834. QUIET_CC = @echo ' ' CC $@;
  835. QUIET_AR = @echo ' ' AR $@;
  836. QUIET_LINK = @echo ' ' LINK $@;
  837. QUIET_MKDIR = @echo ' ' MKDIR $@;
  838. QUIET_BUILT_IN = @echo ' ' BUILTIN $@;
  839. QUIET_GEN = @echo ' ' GEN $@;
  840. QUIET_SUBDIR0 = +@subdir=
  841. QUIET_SUBDIR1 = ;$(NO_SUBDIR) echo ' ' SUBDIR $$subdir; \
  842. $(MAKE) $(PRINT_DIR) -C $$subdir
  843. export V
  844. export QUIET_GEN
  845. export QUIET_BUILT_IN
  846. endif
  847. endif
  848. ifdef ASCIIDOC8
  849. export ASCIIDOC8
  850. endif
  851. # Shell quote (do not use $(call) to accommodate ancient setups);
  852. SHA1_HEADER_SQ = $(subst ','\'',$(SHA1_HEADER))
  853. ETC_PERFCONFIG_SQ = $(subst ','\'',$(ETC_PERFCONFIG))
  854. DESTDIR_SQ = $(subst ','\'',$(DESTDIR))
  855. bindir_SQ = $(subst ','\'',$(bindir))
  856. bindir_relative_SQ = $(subst ','\'',$(bindir_relative))
  857. mandir_SQ = $(subst ','\'',$(mandir))
  858. infodir_SQ = $(subst ','\'',$(infodir))
  859. perfexecdir_SQ = $(subst ','\'',$(perfexecdir))
  860. template_dir_SQ = $(subst ','\'',$(template_dir))
  861. htmldir_SQ = $(subst ','\'',$(htmldir))
  862. prefix_SQ = $(subst ','\'',$(prefix))
  863. SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH))
  864. PERL_PATH_SQ = $(subst ','\'',$(PERL_PATH))
  865. LIBS = -Wl,--whole-archive $(PERFLIBS) -Wl,--no-whole-archive $(EXTLIBS)
  866. BASIC_CFLAGS += -DSHA1_HEADER='$(SHA1_HEADER_SQ)' \
  867. $(COMPAT_CFLAGS)
  868. LIB_OBJS += $(COMPAT_OBJS)
  869. ALL_CFLAGS += $(BASIC_CFLAGS)
  870. ALL_CFLAGS += $(ARCH_CFLAGS)
  871. ALL_LDFLAGS += $(BASIC_LDFLAGS)
  872. export TAR INSTALL DESTDIR SHELL_PATH
  873. ### Build rules
  874. SHELL = $(SHELL_PATH)
  875. all:: shell_compatibility_test $(ALL_PROGRAMS) $(LANG_BINDINGS) $(BUILT_INS) $(OTHER_PROGRAMS) $(OUTPUT)PERF-BUILD-OPTIONS
  876. ifneq (,$X)
  877. $(foreach p,$(patsubst %$X,%,$(filter %$X,$(ALL_PROGRAMS) $(BUILT_INS) perf$X)), test '$p' -ef '$p$X' || $(RM) '$p';)
  878. endif
  879. all::
  880. please_set_SHELL_PATH_to_a_more_modern_shell:
  881. @$$(:)
  882. shell_compatibility_test: please_set_SHELL_PATH_to_a_more_modern_shell
  883. strip: $(PROGRAMS) $(OUTPUT)perf$X
  884. $(STRIP) $(STRIP_OPTS) $(PROGRAMS) $(OUTPUT)perf$X
  885. $(OUTPUT)perf.o: perf.c $(OUTPUT)common-cmds.h $(OUTPUT)PERF-CFLAGS
  886. $(QUIET_CC)$(CC) -DPERF_VERSION='"$(PERF_VERSION)"' \
  887. '-DPERF_HTML_PATH="$(htmldir_SQ)"' \
  888. $(ALL_CFLAGS) -c $(filter %.c,$^) -o $@
  889. $(OUTPUT)perf$X: $(OUTPUT)perf.o $(BUILTIN_OBJS) $(PERFLIBS)
  890. $(QUIET_LINK)$(CC) $(ALL_CFLAGS) $(ALL_LDFLAGS) $(OUTPUT)perf.o \
  891. $(BUILTIN_OBJS) $(LIBS) -o $@
  892. $(OUTPUT)builtin-help.o: builtin-help.c $(OUTPUT)common-cmds.h $(OUTPUT)PERF-CFLAGS
  893. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) \
  894. '-DPERF_HTML_PATH="$(htmldir_SQ)"' \
  895. '-DPERF_MAN_PATH="$(mandir_SQ)"' \
  896. '-DPERF_INFO_PATH="$(infodir_SQ)"' $<
  897. $(OUTPUT)builtin-timechart.o: builtin-timechart.c $(OUTPUT)common-cmds.h $(OUTPUT)PERF-CFLAGS
  898. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) \
  899. '-DPERF_HTML_PATH="$(htmldir_SQ)"' \
  900. '-DPERF_MAN_PATH="$(mandir_SQ)"' \
  901. '-DPERF_INFO_PATH="$(infodir_SQ)"' $<
  902. $(BUILT_INS): $(OUTPUT)perf$X
  903. $(QUIET_BUILT_IN)$(RM) $@ && \
  904. ln perf$X $@ 2>/dev/null || \
  905. ln -s perf$X $@ 2>/dev/null || \
  906. cp perf$X $@
  907. $(OUTPUT)common-cmds.h: util/generate-cmdlist.sh command-list.txt
  908. $(OUTPUT)common-cmds.h: $(wildcard Documentation/perf-*.txt)
  909. $(QUIET_GEN). util/generate-cmdlist.sh > $@+ && mv $@+ $@
  910. $(patsubst %.sh,%,$(SCRIPT_SH)) : % : %.sh
  911. $(QUIET_GEN)$(RM) $(OUTPUT)$@ $(OUTPUT)$@+ && \
  912. sed -e '1s|#!.*/sh|#!$(SHELL_PATH_SQ)|' \
  913. -e 's|@SHELL_PATH@|$(SHELL_PATH_SQ)|' \
  914. -e 's|@@PERL@@|$(PERL_PATH_SQ)|g' \
  915. -e 's/@@PERF_VERSION@@/$(PERF_VERSION)/g' \
  916. -e 's/@@NO_CURL@@/$(NO_CURL)/g' \
  917. $@.sh > $(OUTPUT)$@+ && \
  918. chmod +x $(OUTPUT)$@+ && \
  919. mv $(OUTPUT)$@+ $(OUTPUT)$@
  920. configure: configure.ac
  921. $(QUIET_GEN)$(RM) $@ $<+ && \
  922. sed -e 's/@@PERF_VERSION@@/$(PERF_VERSION)/g' \
  923. $< > $<+ && \
  924. autoconf -o $@ $<+ && \
  925. $(RM) $<+
  926. # These can record PERF_VERSION
  927. $(OUTPUT)perf.o perf.spec \
  928. $(patsubst %.sh,%,$(SCRIPT_SH)) \
  929. $(patsubst %.perl,%,$(SCRIPT_PERL)) \
  930. : $(OUTPUT)PERF-VERSION-FILE
  931. $(OUTPUT)%.o: %.c $(OUTPUT)PERF-CFLAGS
  932. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $<
  933. $(OUTPUT)%.s: %.c $(OUTPUT)PERF-CFLAGS
  934. $(QUIET_CC)$(CC) -S $(ALL_CFLAGS) $<
  935. $(OUTPUT)%.o: %.S
  936. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $<
  937. $(OUTPUT)util/exec_cmd.o: util/exec_cmd.c $(OUTPUT)PERF-CFLAGS
  938. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) \
  939. '-DPERF_EXEC_PATH="$(perfexecdir_SQ)"' \
  940. '-DBINDIR="$(bindir_relative_SQ)"' \
  941. '-DPREFIX="$(prefix_SQ)"' \
  942. $<
  943. $(OUTPUT)builtin-init-db.o: builtin-init-db.c $(OUTPUT)PERF-CFLAGS
  944. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DDEFAULT_PERF_TEMPLATE_DIR='"$(template_dir_SQ)"' $<
  945. $(OUTPUT)util/config.o: util/config.c $(OUTPUT)PERF-CFLAGS
  946. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $<
  947. $(OUTPUT)util/ui/browser.o: util/ui/browser.c $(OUTPUT)PERF-CFLAGS
  948. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DENABLE_SLFUTURE_CONST $<
  949. $(OUTPUT)util/ui/browsers/annotate.o: util/ui/browsers/annotate.c $(OUTPUT)PERF-CFLAGS
  950. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DENABLE_SLFUTURE_CONST $<
  951. $(OUTPUT)util/ui/browsers/top.o: util/ui/browsers/top.c $(OUTPUT)PERF-CFLAGS
  952. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DENABLE_SLFUTURE_CONST $<
  953. $(OUTPUT)util/ui/browsers/hists.o: util/ui/browsers/hists.c $(OUTPUT)PERF-CFLAGS
  954. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DENABLE_SLFUTURE_CONST $<
  955. $(OUTPUT)util/ui/browsers/map.o: util/ui/browsers/map.c $(OUTPUT)PERF-CFLAGS
  956. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DENABLE_SLFUTURE_CONST $<
  957. $(OUTPUT)util/rbtree.o: ../../lib/rbtree.c $(OUTPUT)PERF-CFLAGS
  958. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) -DETC_PERFCONFIG='"$(ETC_PERFCONFIG_SQ)"' $<
  959. $(OUTPUT)util/scripting-engines/trace-event-perl.o: util/scripting-engines/trace-event-perl.c $(OUTPUT)PERF-CFLAGS
  960. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $(PERL_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-shadow $<
  961. $(OUTPUT)scripts/perl/Perf-Trace-Util/Context.o: scripts/perl/Perf-Trace-Util/Context.c $(OUTPUT)PERF-CFLAGS
  962. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $(PERL_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-nested-externs $<
  963. $(OUTPUT)util/scripting-engines/trace-event-python.o: util/scripting-engines/trace-event-python.c $(OUTPUT)PERF-CFLAGS
  964. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $(PYTHON_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-shadow $<
  965. $(OUTPUT)scripts/python/Perf-Trace-Util/Context.o: scripts/python/Perf-Trace-Util/Context.c $(OUTPUT)PERF-CFLAGS
  966. $(QUIET_CC)$(CC) -o $@ -c $(ALL_CFLAGS) $(PYTHON_EMBED_CCOPTS) -Wno-redundant-decls -Wno-strict-prototypes -Wno-unused-parameter -Wno-nested-externs $<
  967. $(OUTPUT)perf-%$X: %.o $(PERFLIBS)
  968. $(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) $(LIBS)
  969. $(LIB_OBJS) $(BUILTIN_OBJS): $(LIB_H)
  970. $(patsubst perf-%$X,%.o,$(PROGRAMS)): $(LIB_H) $(wildcard */*.h)
  971. builtin-revert.o wt-status.o: wt-status.h
  972. # we compile into subdirectories. if the target directory is not the source directory, they might not exists. So
  973. # we depend the various files onto their directories.
  974. DIRECTORY_DEPS = $(LIB_OBJS) $(BUILTIN_OBJS) $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)common-cmds.h
  975. $(DIRECTORY_DEPS): | $(sort $(dir $(DIRECTORY_DEPS)))
  976. # In the second step, we make a rule to actually create these directories
  977. $(sort $(dir $(DIRECTORY_DEPS))):
  978. $(QUIET_MKDIR)$(MKDIR) -p $@ 2>/dev/null
  979. $(LIB_FILE): $(LIB_OBJS)
  980. $(QUIET_AR)$(RM) $@ && $(AR) rcs $@ $(LIB_OBJS)
  981. doc:
  982. $(MAKE) -C Documentation all
  983. man:
  984. $(MAKE) -C Documentation man
  985. html:
  986. $(MAKE) -C Documentation html
  987. info:
  988. $(MAKE) -C Documentation info
  989. pdf:
  990. $(MAKE) -C Documentation pdf
  991. TAGS:
  992. $(RM) TAGS
  993. $(FIND) . -name '*.[hcS]' -print | xargs etags -a
  994. tags:
  995. $(RM) tags
  996. $(FIND) . -name '*.[hcS]' -print | xargs ctags -a
  997. cscope:
  998. $(RM) cscope*
  999. $(FIND) . -name '*.[hcS]' -print | xargs cscope -b
  1000. ### Detect prefix changes
  1001. TRACK_CFLAGS = $(subst ','\'',$(ALL_CFLAGS)):\
  1002. $(bindir_SQ):$(perfexecdir_SQ):$(template_dir_SQ):$(prefix_SQ)
  1003. $(OUTPUT)PERF-CFLAGS: .FORCE-PERF-CFLAGS
  1004. @FLAGS='$(TRACK_CFLAGS)'; \
  1005. if test x"$$FLAGS" != x"`cat $(OUTPUT)PERF-CFLAGS 2>/dev/null`" ; then \
  1006. echo 1>&2 " * new build flags or prefix"; \
  1007. echo "$$FLAGS" >$(OUTPUT)PERF-CFLAGS; \
  1008. fi
  1009. # We need to apply sq twice, once to protect from the shell
  1010. # that runs $(OUTPUT)PERF-BUILD-OPTIONS, and then again to protect it
  1011. # and the first level quoting from the shell that runs "echo".
  1012. $(OUTPUT)PERF-BUILD-OPTIONS: .FORCE-PERF-BUILD-OPTIONS
  1013. @echo SHELL_PATH=\''$(subst ','\'',$(SHELL_PATH_SQ))'\' >$@
  1014. @echo TAR=\''$(subst ','\'',$(subst ','\'',$(TAR)))'\' >>$@
  1015. @echo NO_CURL=\''$(subst ','\'',$(subst ','\'',$(NO_CURL)))'\' >>$@
  1016. @echo NO_PERL=\''$(subst ','\'',$(subst ','\'',$(NO_PERL)))'\' >>$@
  1017. ### Testing rules
  1018. #
  1019. # None right now:
  1020. #
  1021. # TEST_PROGRAMS += test-something$X
  1022. all:: $(TEST_PROGRAMS)
  1023. # GNU make supports exporting all variables by "export" without parameters.
  1024. # However, the environment gets quite big, and some programs have problems
  1025. # with that.
  1026. export NO_SVN_TESTS
  1027. check: $(OUTPUT)common-cmds.h
  1028. if sparse; \
  1029. then \
  1030. for i in *.c */*.c; \
  1031. do \
  1032. sparse $(ALL_CFLAGS) $(SPARSE_FLAGS) $$i || exit; \
  1033. done; \
  1034. else \
  1035. echo 2>&1 "Did you mean 'make test'?"; \
  1036. exit 1; \
  1037. fi
  1038. remove-dashes:
  1039. ./fixup-builtins $(BUILT_INS) $(PROGRAMS) $(SCRIPTS)
  1040. ### Installation rules
  1041. ifneq ($(filter /%,$(firstword $(template_dir))),)
  1042. template_instdir = $(template_dir)
  1043. else
  1044. template_instdir = $(prefix)/$(template_dir)
  1045. endif
  1046. export template_instdir
  1047. ifneq ($(filter /%,$(firstword $(perfexecdir))),)
  1048. perfexec_instdir = $(perfexecdir)
  1049. else
  1050. perfexec_instdir = $(prefix)/$(perfexecdir)
  1051. endif
  1052. perfexec_instdir_SQ = $(subst ','\'',$(perfexec_instdir))
  1053. export perfexec_instdir
  1054. install: all
  1055. $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(bindir_SQ)'
  1056. $(INSTALL) $(OUTPUT)perf$X '$(DESTDIR_SQ)$(bindir_SQ)'
  1057. $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/Perf-Trace-Util/lib/Perf/Trace'
  1058. $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/bin'
  1059. $(INSTALL) $(OUTPUT)perf-archive -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)'
  1060. $(INSTALL) scripts/perl/Perf-Trace-Util/lib/Perf/Trace/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/Perf-Trace-Util/lib/Perf/Trace'
  1061. $(INSTALL) scripts/perl/*.pl -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl'
  1062. $(INSTALL) scripts/perl/bin/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/bin'
  1063. $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/Perf-Trace-Util/lib/Perf/Trace'
  1064. $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/bin'
  1065. $(INSTALL) scripts/python/Perf-Trace-Util/lib/Perf/Trace/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/Perf-Trace-Util/lib/Perf/Trace'
  1066. $(INSTALL) scripts/python/*.py -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python'
  1067. $(INSTALL) scripts/python/bin/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/bin'
  1068. ifdef BUILT_INS
  1069. $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)'
  1070. $(INSTALL) $(BUILT_INS) '$(DESTDIR_SQ)$(perfexec_instdir_SQ)'
  1071. ifneq (,$X)
  1072. $(foreach p,$(patsubst %$X,%,$(filter %$X,$(ALL_PROGRAMS) $(BUILT_INS) $(OUTPUT)perf$X)), $(RM) '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/$p';)
  1073. endif
  1074. endif
  1075. install-doc:
  1076. $(MAKE) -C Documentation install
  1077. install-man:
  1078. $(MAKE) -C Documentation install-man
  1079. install-html:
  1080. $(MAKE) -C Documentation install-html
  1081. install-info:
  1082. $(MAKE) -C Documentation install-info
  1083. install-pdf:
  1084. $(MAKE) -C Documentation install-pdf
  1085. quick-install-doc:
  1086. $(MAKE) -C Documentation quick-install
  1087. quick-install-man:
  1088. $(MAKE) -C Documentation quick-install-man
  1089. quick-install-html:
  1090. $(MAKE) -C Documentation quick-install-html
  1091. ### Maintainer's dist rules
  1092. #
  1093. # None right now
  1094. #
  1095. #
  1096. # perf.spec: perf.spec.in
  1097. # sed -e 's/@@VERSION@@/$(PERF_VERSION)/g' < $< > $@+
  1098. # mv $@+ $@
  1099. #
  1100. # PERF_TARNAME=perf-$(PERF_VERSION)
  1101. # dist: perf.spec perf-archive$(X) configure
  1102. # ./perf-archive --format=tar \
  1103. # --prefix=$(PERF_TARNAME)/ HEAD^{tree} > $(PERF_TARNAME).tar
  1104. # @mkdir -p $(PERF_TARNAME)
  1105. # @cp perf.spec configure $(PERF_TARNAME)
  1106. # @echo $(PERF_VERSION) > $(PERF_TARNAME)/version
  1107. # $(TAR) rf $(PERF_TARNAME).tar \
  1108. # $(PERF_TARNAME)/perf.spec \
  1109. # $(PERF_TARNAME)/configure \
  1110. # $(PERF_TARNAME)/version
  1111. # @$(RM) -r $(PERF_TARNAME)
  1112. # gzip -f -9 $(PERF_TARNAME).tar
  1113. #
  1114. # htmldocs = perf-htmldocs-$(PERF_VERSION)
  1115. # manpages = perf-manpages-$(PERF_VERSION)
  1116. # dist-doc:
  1117. # $(RM) -r .doc-tmp-dir
  1118. # mkdir .doc-tmp-dir
  1119. # $(MAKE) -C Documentation WEBDOC_DEST=../.doc-tmp-dir install-webdoc
  1120. # cd .doc-tmp-dir && $(TAR) cf ../$(htmldocs).tar .
  1121. # gzip -n -9 -f $(htmldocs).tar
  1122. # :
  1123. # $(RM) -r .doc-tmp-dir
  1124. # mkdir -p .doc-tmp-dir/man1 .doc-tmp-dir/man5 .doc-tmp-dir/man7
  1125. # $(MAKE) -C Documentation DESTDIR=./ \
  1126. # man1dir=../.doc-tmp-dir/man1 \
  1127. # man5dir=../.doc-tmp-dir/man5 \
  1128. # man7dir=../.doc-tmp-dir/man7 \
  1129. # install
  1130. # cd .doc-tmp-dir && $(TAR) cf ../$(manpages).tar .
  1131. # gzip -n -9 -f $(manpages).tar
  1132. # $(RM) -r .doc-tmp-dir
  1133. #
  1134. # rpm: dist
  1135. # $(RPMBUILD) -ta $(PERF_TARNAME).tar.gz
  1136. ### Cleaning rules
  1137. distclean: clean
  1138. # $(RM) configure
  1139. clean:
  1140. $(RM) $(OUTPUT){*.o,*/*.o,*/*/*.o,*/*/*/*.o,$(LIB_FILE),perf-archive}
  1141. $(RM) $(ALL_PROGRAMS) $(BUILT_INS) perf$X
  1142. $(RM) $(TEST_PROGRAMS)
  1143. $(RM) *.spec *.pyc *.pyo */*.pyc */*.pyo $(OUTPUT)common-cmds.h TAGS tags cscope*
  1144. $(RM) -r $(PERF_TARNAME) .doc-tmp-dir
  1145. $(RM) $(PERF_TARNAME).tar.gz perf-core_$(PERF_VERSION)-*.tar.gz
  1146. $(RM) $(htmldocs).tar.gz $(manpages).tar.gz
  1147. $(MAKE) -C Documentation/ clean
  1148. $(RM) $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)PERF-CFLAGS $(OUTPUT)PERF-BUILD-OPTIONS
  1149. @python util/setup.py clean --build-lib='$(OUTPUT)python' \
  1150. --build-temp='$(OUTPUT)python/temp'
  1151. .PHONY: all install clean strip
  1152. .PHONY: shell_compatibility_test please_set_SHELL_PATH_to_a_more_modern_shell
  1153. .PHONY: .FORCE-PERF-VERSION-FILE TAGS tags cscope .FORCE-PERF-CFLAGS
  1154. .PHONY: .FORCE-PERF-BUILD-OPTIONS
  1155. ### Make sure built-ins do not have dups and listed in perf.c
  1156. #
  1157. check-builtins::
  1158. ./check-builtins.sh
  1159. ### Test suite coverage testing
  1160. #
  1161. # None right now
  1162. #
  1163. # .PHONY: coverage coverage-clean coverage-build coverage-report
  1164. #
  1165. # coverage:
  1166. # $(MAKE) coverage-build
  1167. # $(MAKE) coverage-report
  1168. #
  1169. # coverage-clean:
  1170. # rm -f *.gcda *.gcno
  1171. #
  1172. # COVERAGE_CFLAGS = $(CFLAGS) -O0 -ftest-coverage -fprofile-arcs
  1173. # COVERAGE_LDFLAGS = $(CFLAGS) -O0 -lgcov
  1174. #
  1175. # coverage-build: coverage-clean
  1176. # $(MAKE) CFLAGS="$(COVERAGE_CFLAGS)" LDFLAGS="$(COVERAGE_LDFLAGS)" all
  1177. # $(MAKE) CFLAGS="$(COVERAGE_CFLAGS)" LDFLAGS="$(COVERAGE_LDFLAGS)" \
  1178. # -j1 test
  1179. #
  1180. # coverage-report:
  1181. # gcov -b *.c */*.c
  1182. # grep '^function.*called 0 ' *.c.gcov */*.c.gcov \
  1183. # | sed -e 's/\([^:]*\)\.gcov: *function \([^ ]*\) called.*/\1: \2/' \
  1184. # | tee coverage-untested-functions