Kconfig 25 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817
  1. #
  2. # Hardware monitoring chip drivers configuration
  3. #
  4. menuconfig HWMON
  5. tristate "Hardware Monitoring support"
  6. depends on HAS_IOMEM
  7. default y
  8. help
  9. Hardware monitoring devices let you monitor the hardware health
  10. of a system. Most modern motherboards include such a device. It
  11. can include temperature sensors, voltage sensors, fan speed
  12. sensors and various additional features such as the ability to
  13. control the speed of the fans. If you want this support you
  14. should say Y here and also to the specific driver(s) for your
  15. sensors chip(s) below.
  16. To find out which specific driver(s) you need, use the
  17. sensors-detect script from the lm_sensors package. Read
  18. <file:Documentation/hwmon/userspace-tools> for details.
  19. This support can also be built as a module. If so, the module
  20. will be called hwmon.
  21. if HWMON
  22. config HWMON_VID
  23. tristate
  24. default n
  25. config SENSORS_ABITUGURU
  26. tristate "Abit uGuru (rev 1 & 2)"
  27. depends on X86 && EXPERIMENTAL
  28. help
  29. If you say yes here you get support for the sensor part of the first
  30. and second revision of the Abit uGuru chip. The voltage and frequency
  31. control parts of the Abit uGuru are not supported. The Abit uGuru
  32. chip can be found on Abit uGuru featuring motherboards (most modern
  33. Abit motherboards from before end 2005). For more info and a list
  34. of which motherboards have which revision see
  35. Documentation/hwmon/abituguru
  36. This driver can also be built as a module. If so, the module
  37. will be called abituguru.
  38. config SENSORS_ABITUGURU3
  39. tristate "Abit uGuru (rev 3)"
  40. depends on X86 && EXPERIMENTAL
  41. help
  42. If you say yes here you get support for the sensor part of the
  43. third revision of the Abit uGuru chip. Only reading the sensors
  44. and their settings is supported. The third revision of the Abit
  45. uGuru chip can be found on recent Abit motherboards (since end
  46. 2005). For more info and a list of which motherboards have which
  47. revision see Documentation/hwmon/abituguru3
  48. This driver can also be built as a module. If so, the module
  49. will be called abituguru3.
  50. config SENSORS_AD7418
  51. tristate "Analog Devices AD7416, AD7417 and AD7418"
  52. depends on I2C && EXPERIMENTAL
  53. help
  54. If you say yes here you get support for the Analog Devices
  55. AD7416, AD7417 and AD7418 temperature monitoring chips.
  56. This driver can also be built as a module. If so, the module
  57. will be called ad7418.
  58. config SENSORS_ADM1021
  59. tristate "Analog Devices ADM1021 and compatibles"
  60. depends on I2C
  61. help
  62. If you say yes here you get support for Analog Devices ADM1021
  63. and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
  64. Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
  65. and the XEON processor built-in sensor.
  66. This driver can also be built as a module. If so, the module
  67. will be called adm1021.
  68. config SENSORS_ADM1025
  69. tristate "Analog Devices ADM1025 and compatibles"
  70. depends on I2C
  71. select HWMON_VID
  72. help
  73. If you say yes here you get support for Analog Devices ADM1025
  74. and Philips NE1619 sensor chips.
  75. This driver can also be built as a module. If so, the module
  76. will be called adm1025.
  77. config SENSORS_ADM1026
  78. tristate "Analog Devices ADM1026 and compatibles"
  79. depends on I2C && EXPERIMENTAL
  80. select HWMON_VID
  81. help
  82. If you say yes here you get support for Analog Devices ADM1026
  83. sensor chip.
  84. This driver can also be built as a module. If so, the module
  85. will be called adm1026.
  86. config SENSORS_ADM1029
  87. tristate "Analog Devices ADM1029"
  88. depends on I2C && EXPERIMENTAL
  89. help
  90. If you say yes here you get support for Analog Devices ADM1029
  91. sensor chip.
  92. Very rare chip, please let us know you use it.
  93. This driver can also be built as a module. If so, the module
  94. will be called adm1029.
  95. config SENSORS_ADM1031
  96. tristate "Analog Devices ADM1031 and compatibles"
  97. depends on I2C && EXPERIMENTAL
  98. help
  99. If you say yes here you get support for Analog Devices ADM1031
  100. and ADM1030 sensor chips.
  101. This driver can also be built as a module. If so, the module
  102. will be called adm1031.
  103. config SENSORS_ADM9240
  104. tristate "Analog Devices ADM9240 and compatibles"
  105. depends on I2C && EXPERIMENTAL
  106. select HWMON_VID
  107. help
  108. If you say yes here you get support for Analog Devices ADM9240,
  109. Dallas DS1780, National Semiconductor LM81 sensor chips.
  110. This driver can also be built as a module. If so, the module
  111. will be called adm9240.
  112. config SENSORS_ADT7470
  113. tristate "Analog Devices ADT7470"
  114. depends on I2C && EXPERIMENTAL
  115. help
  116. If you say yes here you get support for the Analog Devices
  117. ADT7470 temperature monitoring chips.
  118. This driver can also be built as a module. If so, the module
  119. will be called adt7470.
  120. config SENSORS_ADT7473
  121. tristate "Analog Devices ADT7473"
  122. depends on I2C && EXPERIMENTAL
  123. help
  124. If you say yes here you get support for the Analog Devices
  125. ADT7473 temperature monitoring chips.
  126. This driver can also be built as a module. If so, the module
  127. will be called adt7473.
  128. config SENSORS_K8TEMP
  129. tristate "AMD Athlon64/FX or Opteron temperature sensor"
  130. depends on X86 && PCI && EXPERIMENTAL
  131. help
  132. If you say yes here you get support for the temperature
  133. sensor(s) inside your CPU. Supported is whole AMD K8
  134. microarchitecture. Please note that you will need at least
  135. lm-sensors 2.10.1 for proper userspace support.
  136. This driver can also be built as a module. If so, the module
  137. will be called k8temp.
  138. config SENSORS_AMS
  139. tristate "Apple Motion Sensor driver"
  140. depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
  141. select INPUT_POLLDEV
  142. help
  143. Support for the motion sensor included in PowerBooks. Includes
  144. implementations for PMU and I2C.
  145. This driver can also be built as a module. If so, the module
  146. will be called ams.
  147. config SENSORS_AMS_PMU
  148. bool "PMU variant"
  149. depends on SENSORS_AMS && ADB_PMU
  150. default y
  151. help
  152. PMU variant of motion sensor, found in late 2005 PowerBooks.
  153. config SENSORS_AMS_I2C
  154. bool "I2C variant"
  155. depends on SENSORS_AMS && I2C
  156. default y
  157. help
  158. I2C variant of motion sensor, found in early 2005 PowerBooks and
  159. iBooks.
  160. config SENSORS_ASB100
  161. tristate "Asus ASB100 Bach"
  162. depends on X86 && I2C && EXPERIMENTAL
  163. select HWMON_VID
  164. help
  165. If you say yes here you get support for the ASB100 Bach sensor
  166. chip found on some Asus mainboards.
  167. This driver can also be built as a module. If so, the module
  168. will be called asb100.
  169. config SENSORS_ATXP1
  170. tristate "Attansic ATXP1 VID controller"
  171. depends on I2C && EXPERIMENTAL
  172. select HWMON_VID
  173. help
  174. If you say yes here you get support for the Attansic ATXP1 VID
  175. controller.
  176. If your board have such a chip, you are able to control your CPU
  177. core and other voltages.
  178. This driver can also be built as a module. If so, the module
  179. will be called atxp1.
  180. config SENSORS_DS1621
  181. tristate "Dallas Semiconductor DS1621 and DS1625"
  182. depends on I2C
  183. help
  184. If you say yes here you get support for Dallas Semiconductor
  185. DS1621 and DS1625 sensor chips.
  186. This driver can also be built as a module. If so, the module
  187. will be called ds1621.
  188. config SENSORS_I5K_AMB
  189. tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
  190. depends on PCI && EXPERIMENTAL
  191. help
  192. If you say yes here you get support for FB-DIMM AMB temperature
  193. monitoring chips on systems with the Intel 5000 series chipset.
  194. This driver can also be built as a module. If so, the module
  195. will be called i5k_amb.
  196. config SENSORS_F71805F
  197. tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
  198. depends on EXPERIMENTAL
  199. help
  200. If you say yes here you get support for hardware monitoring
  201. features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
  202. Super-I/O chips.
  203. This driver can also be built as a module. If so, the module
  204. will be called f71805f.
  205. config SENSORS_F71882FG
  206. tristate "Fintek F71882FG and F71883FG"
  207. depends on EXPERIMENTAL
  208. help
  209. If you say yes here you get support for hardware monitoring
  210. features of the Fintek F71882FG and F71883FG Super-I/O chips.
  211. This driver can also be built as a module. If so, the module
  212. will be called f71882fg.
  213. config SENSORS_F75375S
  214. tristate "Fintek F75375S/SP and F75373";
  215. depends on I2C && EXPERIMENTAL
  216. help
  217. If you say yes here you get support for hardware monitoring
  218. features of the Fintek F75375S/SP and F75373
  219. This driver can also be built as a module. If so, the module
  220. will be called f75375s.
  221. config SENSORS_FSCHER
  222. tristate "FSC Hermes"
  223. depends on X86 && I2C
  224. help
  225. If you say yes here you get support for Fujitsu Siemens
  226. Computers Hermes sensor chips.
  227. This driver can also be built as a module. If so, the module
  228. will be called fscher.
  229. config SENSORS_FSCPOS
  230. tristate "FSC Poseidon"
  231. depends on X86 && I2C
  232. help
  233. If you say yes here you get support for Fujitsu Siemens
  234. Computers Poseidon sensor chips.
  235. This driver can also be built as a module. If so, the module
  236. will be called fscpos.
  237. config SENSORS_FSCHMD
  238. tristate "FSC Poseidon, Scylla, Hermes, Heimdall and Heracles"
  239. depends on X86 && I2C && EXPERIMENTAL
  240. help
  241. If you say yes here you get support for various Fujitsu Siemens
  242. Computers sensor chips.
  243. This is a new merged driver for FSC sensor chips which is intended
  244. as a replacment for the fscpos, fscscy and fscher drivers and adds
  245. support for several other FCS sensor chips.
  246. This driver can also be built as a module. If so, the module
  247. will be called fschmd.
  248. config SENSORS_GL518SM
  249. tristate "Genesys Logic GL518SM"
  250. depends on I2C
  251. help
  252. If you say yes here you get support for Genesys Logic GL518SM
  253. sensor chips.
  254. This driver can also be built as a module. If so, the module
  255. will be called gl518sm.
  256. config SENSORS_GL520SM
  257. tristate "Genesys Logic GL520SM"
  258. depends on I2C
  259. select HWMON_VID
  260. help
  261. If you say yes here you get support for Genesys Logic GL520SM
  262. sensor chips.
  263. This driver can also be built as a module. If so, the module
  264. will be called gl520sm.
  265. config SENSORS_CORETEMP
  266. tristate "Intel Core (2) Duo/Solo temperature sensor"
  267. depends on X86 && EXPERIMENTAL
  268. help
  269. If you say yes here you get support for the temperature
  270. sensor inside your CPU. Supported all are all known variants
  271. of Intel Core family.
  272. config SENSORS_IBMAEM
  273. tristate "IBM Active Energy Manager temperature/power sensors and control"
  274. select IPMI_SI
  275. depends on IPMI_HANDLER
  276. help
  277. If you say yes here you get support for the temperature and
  278. power sensors and capping hardware in various IBM System X
  279. servers that support Active Energy Manager. This includes
  280. the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
  281. and certain HS2x/LS2x/QS2x blades.
  282. This driver can also be built as a module. If so, the module
  283. will be called ibmaem.
  284. config SENSORS_IBMPEX
  285. tristate "IBM PowerExecutive temperature/power sensors"
  286. select IPMI_SI
  287. depends on IPMI_HANDLER
  288. help
  289. If you say yes here you get support for the temperature and
  290. power sensors in various IBM System X servers that support
  291. PowerExecutive. So far this includes the x3350, x3550, x3650,
  292. x3655, and x3755; the x3800, x3850, and x3950 models that have
  293. PCI Express; and some of the HS2x, LS2x, and QS2x blades.
  294. This driver can also be built as a module. If so, the module
  295. will be called ibmpex.
  296. config SENSORS_IT87
  297. tristate "ITE IT87xx and compatibles"
  298. select HWMON_VID
  299. help
  300. If you say yes here you get support for ITE IT8705F, IT8712F,
  301. IT8716F, IT8718F and IT8726F sensor chips, and the SiS960 clone.
  302. This driver can also be built as a module. If so, the module
  303. will be called it87.
  304. config SENSORS_LM63
  305. tristate "National Semiconductor LM63"
  306. depends on I2C
  307. help
  308. If you say yes here you get support for the National Semiconductor
  309. LM63 remote diode digital temperature sensor with integrated fan
  310. control. Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
  311. motherboard, among others.
  312. This driver can also be built as a module. If so, the module
  313. will be called lm63.
  314. config SENSORS_LM70
  315. tristate "National Semiconductor LM70"
  316. depends on SPI_MASTER && EXPERIMENTAL
  317. help
  318. If you say yes here you get support for the National Semiconductor
  319. LM70 digital temperature sensor chip.
  320. This driver can also be built as a module. If so, the module
  321. will be called lm70.
  322. config SENSORS_LM75
  323. tristate "National Semiconductor LM75 and compatibles"
  324. depends on I2C
  325. help
  326. If you say yes here you get support for one common type of
  327. temperature sensor chip, with models including:
  328. - Dallas Semiconductor DS75 and DS1775
  329. - Maxim MAX6625 and MAX6626
  330. - Microchip MCP980x
  331. - National Semiconductor LM75
  332. - NXP's LM75A
  333. - ST Microelectronics STDS75
  334. - TelCom (now Microchip) TCN75
  335. - Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275
  336. Most of these chips will require a "force" module parameter.
  337. This driver can also be built as a module. If so, the module
  338. will be called lm75.
  339. config SENSORS_LM77
  340. tristate "National Semiconductor LM77"
  341. depends on I2C
  342. help
  343. If you say yes here you get support for National Semiconductor LM77
  344. sensor chips.
  345. This driver can also be built as a module. If so, the module
  346. will be called lm77.
  347. config SENSORS_LM78
  348. tristate "National Semiconductor LM78 and compatibles"
  349. depends on I2C
  350. select HWMON_VID
  351. help
  352. If you say yes here you get support for National Semiconductor LM78,
  353. LM78-J and LM79.
  354. This driver can also be built as a module. If so, the module
  355. will be called lm78.
  356. config SENSORS_LM80
  357. tristate "National Semiconductor LM80"
  358. depends on I2C && EXPERIMENTAL
  359. help
  360. If you say yes here you get support for National Semiconductor
  361. LM80 sensor chips.
  362. This driver can also be built as a module. If so, the module
  363. will be called lm80.
  364. config SENSORS_LM83
  365. tristate "National Semiconductor LM83 and compatibles"
  366. depends on I2C
  367. help
  368. If you say yes here you get support for National Semiconductor
  369. LM82 and LM83 sensor chips.
  370. This driver can also be built as a module. If so, the module
  371. will be called lm83.
  372. config SENSORS_LM85
  373. tristate "National Semiconductor LM85 and compatibles"
  374. depends on I2C && EXPERIMENTAL
  375. select HWMON_VID
  376. help
  377. If you say yes here you get support for National Semiconductor LM85
  378. sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
  379. This driver can also be built as a module. If so, the module
  380. will be called lm85.
  381. config SENSORS_LM87
  382. tristate "National Semiconductor LM87 and compatibles"
  383. depends on I2C
  384. select HWMON_VID
  385. help
  386. If you say yes here you get support for National Semiconductor LM87
  387. and Analog Devices ADM1024 sensor chips.
  388. This driver can also be built as a module. If so, the module
  389. will be called lm87.
  390. config SENSORS_LM90
  391. tristate "National Semiconductor LM90 and compatibles"
  392. depends on I2C
  393. help
  394. If you say yes here you get support for National Semiconductor LM90,
  395. LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657,
  396. MAX6658, MAX6659, MAX6680 and MAX6681 sensor chips.
  397. The Analog Devices ADT7461 sensor chip is also supported, but only
  398. if found in ADM1032 compatibility mode.
  399. This driver can also be built as a module. If so, the module
  400. will be called lm90.
  401. config SENSORS_LM92
  402. tristate "National Semiconductor LM92 and compatibles"
  403. depends on I2C
  404. help
  405. If you say yes here you get support for National Semiconductor LM92
  406. and Maxim MAX6635 sensor chips.
  407. This driver can also be built as a module. If so, the module
  408. will be called lm92.
  409. config SENSORS_LM93
  410. tristate "National Semiconductor LM93 and compatibles"
  411. depends on I2C
  412. select HWMON_VID
  413. help
  414. If you say yes here you get support for National Semiconductor LM93
  415. sensor chips.
  416. This driver can also be built as a module. If so, the module
  417. will be called lm93.
  418. config SENSORS_MAX1619
  419. tristate "Maxim MAX1619 sensor chip"
  420. depends on I2C
  421. help
  422. If you say yes here you get support for MAX1619 sensor chip.
  423. This driver can also be built as a module. If so, the module
  424. will be called max1619.
  425. config SENSORS_MAX6650
  426. tristate "Maxim MAX6650 sensor chip"
  427. depends on I2C && EXPERIMENTAL
  428. help
  429. If you say yes here you get support for the MAX6650 / MAX6651
  430. sensor chips.
  431. This driver can also be built as a module. If so, the module
  432. will be called max6650.
  433. config SENSORS_PC87360
  434. tristate "National Semiconductor PC87360 family"
  435. select HWMON_VID
  436. help
  437. If you say yes here you get access to the hardware monitoring
  438. functions of the National Semiconductor PC8736x Super-I/O chips.
  439. The PC87360, PC87363 and PC87364 only have fan monitoring and
  440. control. The PC87365 and PC87366 additionally have voltage and
  441. temperature monitoring.
  442. This driver can also be built as a module. If so, the module
  443. will be called pc87360.
  444. config SENSORS_PC87427
  445. tristate "National Semiconductor PC87427"
  446. depends on EXPERIMENTAL
  447. help
  448. If you say yes here you get access to the hardware monitoring
  449. functions of the National Semiconductor PC87427 Super-I/O chip.
  450. The chip has two distinct logical devices, one for fan speed
  451. monitoring and control, and one for voltage and temperature
  452. monitoring. Only fan speed monitoring is supported right now.
  453. This driver can also be built as a module. If so, the module
  454. will be called pc87427.
  455. config SENSORS_SIS5595
  456. tristate "Silicon Integrated Systems Corp. SiS5595"
  457. depends on PCI
  458. help
  459. If you say yes here you get support for the integrated sensors in
  460. SiS5595 South Bridges.
  461. This driver can also be built as a module. If so, the module
  462. will be called sis5595.
  463. config SENSORS_DME1737
  464. tristate "SMSC DME1737, SCH311x and compatibles"
  465. depends on I2C && EXPERIMENTAL
  466. select HWMON_VID
  467. help
  468. If you say yes here you get support for the hardware monitoring
  469. and fan control features of the SMSC DME1737 (and compatibles
  470. like the Asus A8000) and SCH311x Super-I/O chips.
  471. This driver can also be built as a module. If so, the module
  472. will be called dme1737.
  473. config SENSORS_SMSC47M1
  474. tristate "SMSC LPC47M10x and compatibles"
  475. help
  476. If you say yes here you get support for the integrated fan
  477. monitoring and control capabilities of the SMSC LPC47B27x,
  478. LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
  479. LPC47M192, LPC47M292 and LPC47M997 chips.
  480. The temperature and voltage sensor features of the LPC47M15x,
  481. LPC47M192, LPC47M292 and LPC47M997 are supported by another
  482. driver, select also "SMSC LPC47M192 and compatibles" below for
  483. those.
  484. This driver can also be built as a module. If so, the module
  485. will be called smsc47m1.
  486. config SENSORS_SMSC47M192
  487. tristate "SMSC LPC47M192 and compatibles"
  488. depends on I2C && EXPERIMENTAL
  489. select HWMON_VID
  490. help
  491. If you say yes here you get support for the temperature and
  492. voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
  493. and LPC47M997 chips.
  494. The fan monitoring and control capabilities of these chips
  495. are supported by another driver, select
  496. "SMSC LPC47M10x and compatibles" above. You need both drivers
  497. if you want fan control and voltage/temperature sensor support.
  498. This driver can also be built as a module. If so, the module
  499. will be called smsc47m192.
  500. config SENSORS_SMSC47B397
  501. tristate "SMSC LPC47B397-NC"
  502. depends on EXPERIMENTAL
  503. help
  504. If you say yes here you get support for the SMSC LPC47B397-NC
  505. sensor chip.
  506. This driver can also be built as a module. If so, the module
  507. will be called smsc47b397.
  508. config SENSORS_ADS7828
  509. tristate "Texas Instruments ADS7828"
  510. depends on I2C
  511. help
  512. If you say yes here you get support for Texas Instruments ADS7828
  513. 12-bit 8-channel ADC device.
  514. This driver can also be built as a module. If so, the module
  515. will be called ads7828.
  516. config SENSORS_THMC50
  517. tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
  518. depends on I2C && EXPERIMENTAL
  519. help
  520. If you say yes here you get support for Texas Instruments THMC50
  521. sensor chips and clones: the Analog Devices ADM1022.
  522. This driver can also be built as a module. If so, the module
  523. will be called thmc50.
  524. config SENSORS_VIA686A
  525. tristate "VIA686A"
  526. depends on PCI
  527. help
  528. If you say yes here you get support for the integrated sensors in
  529. Via 686A/B South Bridges.
  530. This driver can also be built as a module. If so, the module
  531. will be called via686a.
  532. config SENSORS_VT1211
  533. tristate "VIA VT1211"
  534. depends on EXPERIMENTAL
  535. select HWMON_VID
  536. help
  537. If you say yes here then you get support for hardware monitoring
  538. features of the VIA VT1211 Super-I/O chip.
  539. This driver can also be built as a module. If so, the module
  540. will be called vt1211.
  541. config SENSORS_VT8231
  542. tristate "VIA VT8231"
  543. depends on PCI
  544. select HWMON_VID
  545. help
  546. If you say yes here then you get support for the integrated sensors
  547. in the VIA VT8231 device.
  548. This driver can also be built as a module. If so, the module
  549. will be called vt8231.
  550. config SENSORS_W83781D
  551. tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
  552. depends on I2C
  553. select HWMON_VID
  554. help
  555. If you say yes here you get support for the Winbond W8378x series
  556. of sensor chips: the W83781D, W83782D and W83783S, and the similar
  557. Asus AS99127F.
  558. This driver can also be built as a module. If so, the module
  559. will be called w83781d.
  560. config SENSORS_W83791D
  561. tristate "Winbond W83791D"
  562. depends on I2C && EXPERIMENTAL
  563. select HWMON_VID
  564. help
  565. If you say yes here you get support for the Winbond W83791D chip.
  566. This driver can also be built as a module. If so, the module
  567. will be called w83791d.
  568. config SENSORS_W83792D
  569. tristate "Winbond W83792D"
  570. depends on I2C && EXPERIMENTAL
  571. help
  572. If you say yes here you get support for the Winbond W83792D chip.
  573. This driver can also be built as a module. If so, the module
  574. will be called w83792d.
  575. config SENSORS_W83793
  576. tristate "Winbond W83793"
  577. depends on I2C && EXPERIMENTAL
  578. select HWMON_VID
  579. help
  580. If you say yes here you get support for the Winbond W83793
  581. hardware monitoring chip.
  582. This driver can also be built as a module. If so, the module
  583. will be called w83793.
  584. config SENSORS_W83L785TS
  585. tristate "Winbond W83L785TS-S"
  586. depends on I2C && EXPERIMENTAL
  587. help
  588. If you say yes here you get support for the Winbond W83L785TS-S
  589. sensor chip, which is used on the Asus A7N8X, among other
  590. motherboards.
  591. This driver can also be built as a module. If so, the module
  592. will be called w83l785ts.
  593. config SENSORS_W83L786NG
  594. tristate "Winbond W83L786NG, W83L786NR"
  595. depends on I2C && EXPERIMENTAL
  596. help
  597. If you say yes here you get support for the Winbond W83L786NG
  598. and W83L786NR sensor chips.
  599. This driver can also be built as a module. If so, the module
  600. will be called w83l786ng.
  601. config SENSORS_W83627HF
  602. tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
  603. select HWMON_VID
  604. help
  605. If you say yes here you get support for the Winbond W836X7 series
  606. of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
  607. W83697HF.
  608. This driver can also be built as a module. If so, the module
  609. will be called w83627hf.
  610. config SENSORS_W83627EHF
  611. tristate "Winbond W83627EHF/DHG"
  612. select HWMON_VID
  613. help
  614. If you say yes here you get support for the hardware
  615. monitoring functionality of the Winbond W83627EHF Super-I/O chip.
  616. This driver also supports the W83627EHG, which is the lead-free
  617. version of the W83627EHF, and the W83627DHG, which is a similar
  618. chip suited for specific Intel processors that use PECI such as
  619. the Core 2 Duo.
  620. This driver can also be built as a module. If so, the module
  621. will be called w83627ehf.
  622. config SENSORS_HDAPS
  623. tristate "IBM Hard Drive Active Protection System (hdaps)"
  624. depends on INPUT && X86
  625. select INPUT_POLLDEV
  626. default n
  627. help
  628. This driver provides support for the IBM Hard Drive Active Protection
  629. System (hdaps), which provides an accelerometer and other misc. data.
  630. ThinkPads starting with the R50, T41, and X40 are supported. The
  631. accelerometer data is readable via sysfs.
  632. This driver also provides an absolute input class device, allowing
  633. the laptop to act as a pinball machine-esque joystick.
  634. If your ThinkPad is not recognized by the driver, please update to latest
  635. BIOS. This is especially the case for some R52 ThinkPads.
  636. Say Y here if you have an applicable laptop and want to experience
  637. the awesome power of hdaps.
  638. config SENSORS_APPLESMC
  639. tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
  640. depends on INPUT && X86
  641. select NEW_LEDS
  642. select LEDS_CLASS
  643. select INPUT_POLLDEV
  644. default n
  645. help
  646. This driver provides support for the Apple System Management
  647. Controller, which provides an accelerometer (Apple Sudden Motion
  648. Sensor), light sensors, temperature sensors, keyboard backlight
  649. control and fan control.
  650. Only Intel-based Apple's computers are supported (MacBook Pro,
  651. MacBook, MacMini).
  652. Data from the different sensors, keyboard backlight control and fan
  653. control are accessible via sysfs.
  654. This driver also provides an absolute input class device, allowing
  655. the laptop to act as a pinball machine-esque joystick.
  656. Say Y here if you have an applicable laptop and want to experience
  657. the awesome power of applesmc.
  658. config HWMON_DEBUG_CHIP
  659. bool "Hardware Monitoring Chip debugging messages"
  660. default n
  661. help
  662. Say Y here if you want the I2C chip drivers to produce a bunch of
  663. debug messages to the system log. Select this if you are having
  664. a problem with I2C support and want to see more of what is going
  665. on.
  666. endif # HWMON