Johannes Stezenbach
|
0e0d39e5f3
rt2800usb: read TX_STA_FIFO asynchronously
|
%!s(int64=14) %!d(string=hai) anos |
Helmut Schaa
|
961636ba17
rt2x00: Update TX_SW_CFG2 init value
|
%!s(int64=14) %!d(string=hai) anos |
Helmut Schaa
|
15a533c47f
rt2x00: Use correct TBTT_SYNC config in AP mode
|
%!s(int64=14) %!d(string=hai) anos |
Ivo van Doorn
|
7dab73b37f
rt2x00: Split rt2x00dev->flags
|
%!s(int64=14) %!d(string=hai) anos |
Layne Edwards
|
44704e5d7d
rt2x00: Enable WLAN LED on Ralink SoC (rt305x) devices
|
%!s(int64=14) %!d(string=hai) anos |
Helmut Schaa
|
f16d2db704
rt2x00: Fix tx aggregation problems with some clients
|
%!s(int64=14) %!d(string=hai) anos |
Helmut Schaa
|
9e33a35538
rt2x00: Implement tx power temperature compensation
|
%!s(int64=14) %!d(string=hai) anos |
Helmut Schaa
|
fa71a16027
rt2x00: Indention cleanup in rt2800lib
|
%!s(int64=14) %!d(string=hai) anos |
Helmut Schaa
|
2af242e19f
rt2x00: Don't recalculate HT40 compensation for each rate
|
%!s(int64=14) %!d(string=hai) anos |
Helmut Schaa
|
75faae8b80
rt2x00: Restructure bw_comp calculation
|
%!s(int64=14) %!d(string=hai) anos |
Helmut Schaa
|
1ed3811c33
rt2x00: Fix rt2800 key assignment in multi bssid setups
|
%!s(int64=14) %!d(string=hai) anos |
Helmut Schaa
|
26a1d07f41
rt2x00: Optimize TX descriptor handling
|
%!s(int64=14) %!d(string=hai) anos |
Helmut Schaa
|
5356d96330
rt2x00: Add unlikely macro to special case tx status handling
|
%!s(int64=14) %!d(string=hai) anos |
Helmut Schaa
|
11f818e0eb
rt2x00: Optimize calls to rt2x00queue_get_queue
|
%!s(int64=14) %!d(string=hai) anos |
Gabor Juhos
|
adde5882bc
rt2x00: fix whitespace damage in the rt2800 specific code
|
%!s(int64=14) %!d(string=hai) anos |
RA-Shiang Tu
|
60687ba710
rt2x00: Add support for RT5390 chip
|
%!s(int64=14) %!d(string=hai) anos |
Shiang Tu
|
fe59147c4f
rt2x00: Add/Modify the GPIO register definition
|
%!s(int64=14) %!d(string=hai) anos |
Shiang Tu
|
6f492b6d38
rt2x00: Add/Modify protection related register definitions
|
%!s(int64=14) %!d(string=hai) anos |
RA-Jay Hung
|
e90c54b235
rt2x00: Fix rt2800 txpower setting to correct value
|
%!s(int64=14) %!d(string=hai) anos |
RA-Jay Hung
|
d96aa64096
rt2x00: Add antenna setting for RT3070/RT3090/RT3390 with RX antenna diversity support
|
%!s(int64=14) %!d(string=hai) anos |
Seth Forshee
|
d76dfc612b
rt2x00: Check for errors from skb_pad() calls
|
%!s(int64=14) %!d(string=hai) anos |
Gertjan van Wingerde
|
10026f77b3
rt2x00: Copy the MAC address to the WCID entry properly.
|
%!s(int64=14) %!d(string=hai) anos |
RA-Jay Hung
|
c6fcc0e5f7
rt2x00: Correct initial value of US_CYC_CNT register for pcie interface
|
%!s(int64=14) %!d(string=hai) anos |
Helmut Schaa
|
69cf36a452
rt2x00: Refactor beacon code to make use of start- and stop_queue
|
%!s(int64=14) %!d(string=hai) anos |
Johannes Berg
|
0b01f030d3
mac80211: track receiver's aggregation reorder buffer size
|
%!s(int64=14) %!d(string=hai) anos |
RA-Jay Hung
|
80d184e6cf
rt2x00: Fix and fine-tune rf registers for RT3070/RT3071/RT3090
|
%!s(int64=14) %!d(string=hai) anos |
RA-Jay Hung
|
7f6e144fb9
rt2x00: Fix radio off hang issue for PCIE interface
|
%!s(int64=14) %!d(string=hai) anos |
Wolfgang Kufner
|
739fd94054
rt2x00: Pad beacon to multiple of 32 bits.
|
%!s(int64=14) %!d(string=hai) anos |
Helmut Schaa
|
977206d79f
rt2x00: Implement get_survey callback for rt2800
|
%!s(int64=14) %!d(string=hai) anos |
RA-Jay Hung
|
38c8a566fc
rt2x00: Add rt2800 EEPROM definition
|
%!s(int64=14) %!d(string=hai) anos |