Merge branch 'common/fbdev-mipi' of master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6

Documentation/ABI/obsolete/proc-pid-oom_adj

@@ -0,0 +1,22 @@
+What:	/proc/<pid>/oom_adj
+When:	August 2012
+Why:	/proc/<pid>/oom_adj allows userspace to influence the oom killer's
+	badness heuristic used to determine which task to kill when the kernel
+	is out of memory.
+
+	The badness heuristic has since been rewritten since the introduction of
+	this tunable such that its meaning is deprecated.  The value was
+	implemented as a bitshift on a score generated by the badness()
+	function that did not have any precise units of measure.  With the
+	rewrite, the score is given as a proportion of available memory to the
+	task allocating pages, so using a bitshift which grows the score
+	exponentially is, thus, impossible to tune with fine granularity.
+
+	A much more powerful interface, /proc/<pid>/oom_score_adj, was
+	introduced with the oom killer rewrite that allows users to increase or
+	decrease the badness() score linearly.  This interface will replace
+	/proc/<pid>/oom_adj.
+
+	A warning will be emitted to the kernel log if an application uses this
+	deprecated interface.  After it is printed once, future warnings will be
+	suppressed until the kernel is rebooted.

Documentation/arm/OMAP/DSS

@@ -255,9 +255,10 @@ framebuffer parameters.
 Kernel boot arguments
 ---------------------
 
-vram=<size>
-	- Amount of total VRAM to preallocate. For example, "10M". omapfb
-	  allocates memory for framebuffers from VRAM.
+vram=<size>[,<physaddr>]
+	- Amount of total VRAM to preallocate and optionally a physical start
+	  memory address. For example, "10M". omapfb allocates memory for
+	  framebuffers from VRAM.
 
 omapfb.mode=<display>:<mode>[,...]
 	- Default video mode for specified displays. For example,

Documentation/block/switching-sched.txt

@@ -16,7 +16,7 @@ you can do so by typing:
 As of the Linux 2.6.10 kernel, it is now possible to change the
 IO scheduler for a given block device on the fly (thus making it possible,
 for instance, to set the CFQ scheduler for the system default, but
-set a specific device to use the anticipatory or noop schedulers - which
+set a specific device to use the deadline or noop schedulers - which
 can improve that device's throughput).
 
 To set a specific scheduler, simply do this:
@@ -31,7 +31,7 @@ a "cat /sys/block/DEV/queue/scheduler" - the list of valid names
 will be displayed, with the currently selected scheduler in brackets:
 
 # cat /sys/block/hda/queue/scheduler
-noop anticipatory deadline [cfq]
-# echo anticipatory > /sys/block/hda/queue/scheduler
+noop deadline [cfq]
+# echo deadline > /sys/block/hda/queue/scheduler
 # cat /sys/block/hda/queue/scheduler
-noop [anticipatory] deadline cfq
+noop [deadline] cfq

Documentation/feature-removal-schedule.txt

@@ -554,3 +554,13 @@ Why:    This is a legacy interface which have been replaced by a more
 Who:    NeilBrown <neilb@suse.de>
 
 ----------------------------
+
+What:	i2c_adapter.id
+When:	June 2011
+Why:	This field is deprecated. I2C device drivers shouldn't change their
+	behavior based on the underlying I2C adapter. Instead, the I2C
+	adapter driver should instantiate the I2C devices and provide the
+	needed platform-specific information.
+Who:	Jean Delvare <khali@linux-fr.org>
+
+----------------------------

Documentation/filesystems/xfs-delayed-logging-design.txt

@@ -794,17 +794,6 @@ designed.
 
 Roadmap:
 
-2.6.37 Remove experimental tag from mount option
-	=> should be roughly 6 months after initial merge
-	=> enough time to:
-		=> gain confidence and fix problems reported by early
-		   adopters (a.k.a. guinea pigs)
-		=> address worst performance regressions and undesired
-		   behaviours
-		=> start tuning/optimising code for parallelism
-		=> start tuning/optimising algorithms consuming
-		   excessive CPU time
-
 2.6.39 Switch default mount option to use delayed logging
 	=> should be roughly 12 months after initial merge
 	=> enough time to shake out remaining problems before next round of

Documentation/kernel-parameters.txt

@@ -706,7 +706,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			arch/x86/kernel/cpu/cpufreq/elanfreq.c.
 
 	elevator=	[IOSCHED]
-			Format: {"anticipatory" | "cfq" | "deadline" | "noop"}
+			Format: {"cfq" | "deadline" | "noop"}
 			See Documentation/block/as-iosched.txt and
 			Documentation/block/deadline-iosched.txt for details.
 

Documentation/leds-class.txt

@@ -60,15 +60,18 @@ Hardware accelerated blink of LEDs
 
 Some LEDs can be programmed to blink without any CPU interaction. To
 support this feature, a LED driver can optionally implement the
-blink_set() function (see <linux/leds.h>). If implemented, triggers can
-attempt to use it before falling back to software timers. The blink_set()
-function should return 0 if the blink setting is supported, or -EINVAL
-otherwise, which means that LED blinking will be handled by software.
-
-The blink_set() function should choose a user friendly blinking
-value if it is called with *delay_on==0 && *delay_off==0 parameters. In
-this case the driver should give back the chosen value through delay_on
-and delay_off parameters to the leds subsystem.
+blink_set() function (see <linux/leds.h>). To set an LED to blinking,
+however, it is better to use use the API function led_blink_set(),
+as it will check and implement software fallback if necessary.
+
+To turn off blinking again, use the API function led_brightness_set()
+as that will not just set the LED brightness but also stop any software
+timers that may have been required for blinking.
+
+The blink_set() function should choose a user friendly blinking value
+if it is called with *delay_on==0 && *delay_off==0 parameters. In this
+case the driver should give back the chosen value through delay_on and
+delay_off parameters to the leds subsystem.
 
 Setting the brightness to zero with brightness_set() callback function
 should completely turn off the LED and cancel the previously programmed

Documentation/leds/leds-lp5521.txt

@@ -0,0 +1,88 @@
+Kernel driver for lp5521
+========================
+
+* National Semiconductor LP5521 led driver chip
+* Datasheet: http://www.national.com/pf/LP/LP5521.html
+
+Authors: Mathias Nyman, Yuri Zaporozhets, Samu Onkalo
+Contact: Samu Onkalo (samu.p.onkalo-at-nokia.com)
+
+Description
+-----------
+
+LP5521 can drive up to 3 channels. Leds can be controlled directly via
+the led class control interface. Channels have generic names:
+lp5521:channelx, where x is 0 .. 2
+
+All three channels can be also controlled using the engine micro programs.
+More details of the instructions can be found from the public data sheet.
+
+Control interface for the engines:
+x is 1 .. 3
+enginex_mode : disabled, load, run
+enginex_load : store program (visible only in engine load mode)
+
+Example (start to blink the channel 2 led):
+cd   /sys/class/leds/lp5521:channel2/device
+echo "load" > engine3_mode
+echo "037f4d0003ff6000" > engine3_load
+echo "run" > engine3_mode
+
+stop the engine:
+echo "disabled" > engine3_mode
+
+sysfs contains a selftest entry.
+The test communicates with the chip and checks that
+the clock mode is automatically set to the requested one.
+
+Each channel has its own led current settings.
+/sys/class/leds/lp5521:channel0/led_current - RW
+/sys/class/leds/lp5521:channel0/max_current - RO
+Format: 10x mA i.e 10 means 1.0 mA
+
+example platform data:
+
+Note: chan_nr can have values between 0 and 2.
+
+static struct lp5521_led_config lp5521_led_config[] = {
+        {
+                .chan_nr        = 0,
+                .led_current    = 50,
+		.max_current    = 130,
+        }, {
+                .chan_nr        = 1,
+                .led_current    = 0,
+		.max_current    = 130,
+        }, {
+                .chan_nr        = 2,
+                .led_current    = 0,
+		.max_current    = 130,
+        }
+};
+
+static int lp5521_setup(void)
+{
+	/* setup HW resources */
+}
+
+static void lp5521_release(void)
+{
+	/* Release HW resources */
+}
+
+static void lp5521_enable(bool state)
+{
+	/* Control of chip enable signal */
+}
+
+static struct lp5521_platform_data lp5521_platform_data = {
+        .led_config     = lp5521_led_config,
+        .num_channels   = ARRAY_SIZE(lp5521_led_config),
+        .clock_mode     = LP5521_CLOCK_EXT,
+        .setup_resources   = lp5521_setup,
+        .release_resources = lp5521_release,
+        .enable            = lp5521_enable,
+};
+
+If the current is set to 0 in the platform data, that channel is
+disabled and it is not visible in the sysfs.

Documentation/leds/leds-lp5523.txt

@@ -0,0 +1,83 @@
+Kernel driver for lp5523
+========================
+
+* National Semiconductor LP5523 led driver chip
+* Datasheet: http://www.national.com/pf/LP/LP5523.html
+
+Authors: Mathias Nyman, Yuri Zaporozhets, Samu Onkalo
+Contact: Samu Onkalo (samu.p.onkalo-at-nokia.com)
+
+Description
+-----------
+LP5523 can drive up to 9 channels. Leds can be controlled directly via
+the led class control interface. Channels have generic names:
+lp5523:channelx where x is 0...8
+
+The chip provides 3 engines. Each engine can control channels without
+interaction from the main CPU. Details of the micro engine code can be found
+from the public data sheet. Leds can be muxed to different channels.
+
+Control interface for the engines:
+x is 1 .. 3
+enginex_mode : disabled, load, run
+enginex_load : microcode load (visible only in load mode)
+enginex_leds : led mux control (visible only in load mode)
+
+cd /sys/class/leds/lp5523:channel2/device
+echo "load" > engine3_mode
+echo "9d80400004ff05ff437f0000" > engine3_load
+echo "111111111" > engine3_leds
+echo "run" > engine3_mode
+
+sysfs contains a selftest entry. It measures each channel
+voltage level and checks if it looks reasonable. If the level is too high,
+the led is missing; if the level is too low, there is a short circuit.
+
+Selftest uses always the current from the platform data.
+
+Each channel contains led current settings.
+/sys/class/leds/lp5523:channel2/led_current - RW
+/sys/class/leds/lp5523:channel2/max_current - RO
+Format: 10x mA i.e 10 means 1.0 mA
+
+Example platform data:
+
+Note - chan_nr can have values between 0 and 8.
+
+static struct lp5523_led_config lp5523_led_config[] = {
+        {
+                .chan_nr        = 0,
+                .led_current    = 50,
+		.max_current    = 130,
+        },
+...
+        }, {
+                .chan_nr        = 8,
+                .led_current    = 50,
+		.max_current    = 130,
+        }
+};
+
+static int lp5523_setup(void)
+{
+	/* Setup HW resources */
+}
+
+static void lp5523_release(void)
+{
+	/* Release HW resources */
+}
+
+static void lp5523_enable(bool state)
+{
+	/* Control chip enable signal */
+}
+
+static struct lp5523_platform_data lp5523_platform_data = {
+        .led_config     = lp5523_led_config,
+        .num_channels   = ARRAY_SIZE(lp5523_led_config),
+        .clock_mode     = LP5523_CLOCK_EXT,
+        .setup_resources   = lp5523_setup,
+        .release_resources = lp5523_release,
+        .enable            = lp5523_enable,
+};

Documentation/networking/ip-sysctl.txt

@@ -20,6 +20,15 @@ ip_no_pmtu_disc - BOOLEAN
 min_pmtu - INTEGER
 	default 562 - minimum discovered Path MTU
 
+route/max_size - INTEGER
+	Maximum number of routes allowed in the kernel.  Increase
+	this when using large numbers of interfaces and/or routes.
+
+neigh/default/gc_thresh3 - INTEGER
+	Maximum number of neighbor entries allowed.  Increase this
+	when using large numbers of interfaces and when communicating
+	with large numbers of directly-connected peers.
+
 mtu_expires - INTEGER
 	Time, in seconds, that cached PMTU information is kept.
 

Documentation/power/opp.txt

@@ -37,6 +37,9 @@ Typical usage of the OPP library is as follows:
 SoC framework	-> modifies on required cases certain OPPs	-> OPP layer
 		-> queries to search/retrieve information	->
 
+Architectures that provide a SoC framework for OPP should select ARCH_HAS_OPP
+to make the OPP layer available.
+
 OPP layer expects each domain to be represented by a unique device pointer. SoC
 framework registers a set of initial OPPs per device with the OPP layer. This
 list is expected to be an optimally small number typically around 5 per device.

Documentation/rbtree.txt

@@ -21,8 +21,8 @@ three rotations, respectively, to balance the tree), with slightly slower
 To quote Linux Weekly News:
 
     There are a number of red-black trees in use in the kernel.
-    The anticipatory, deadline, and CFQ I/O schedulers all employ
-    rbtrees to track requests; the packet CD/DVD driver does the same.
+    The deadline and CFQ I/O schedulers employ rbtrees to
+    track requests; the packet CD/DVD driver does the same.
     The high-resolution timer code uses an rbtree to organize outstanding
     timer requests.  The ext3 filesystem tracks directory entries in a
     red-black tree.  Virtual memory areas (VMAs) are tracked with red-black

Documentation/sysctl/kernel.txt

@@ -28,6 +28,7 @@ show up in /proc/sys/kernel:
 - core_uses_pid
 - ctrl-alt-del
 - dentry-state
+- dmesg_restrict
 - domainname
 - hostname
 - hotplug
@@ -213,6 +214,19 @@ to decide what to do with it.
 
 ==============================================================
 
+dmesg_restrict:
+
+This toggle indicates whether unprivileged users are prevented from using
+dmesg(8) to view messages from the kernel's log buffer.  When
+dmesg_restrict is set to (0) there are no restrictions.  When
+dmesg_restrict is set set to (1), users must have CAP_SYS_ADMIN to use
+dmesg(8).
+
+The kernel config option CONFIG_SECURITY_DMESG_RESTRICT sets the default
+value of dmesg_restrict.
+
+==============================================================
+
 domainname & hostname:
 
 These files can be used to set the NIS/YP domainname and the

MAINTAINERS

@@ -161,7 +161,7 @@ M:	Greg Kroah-Hartman <gregkh@suse.de>
 L:	linux-serial@vger.kernel.org
 W:	http://serial.sourceforge.net
 S:	Maintained
-T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
 F:	drivers/serial/8250*
 F:	include/linux/serial_8250.h
 
@@ -945,7 +945,7 @@ M:	Magnus Damm <magnus.damm@gmail.com>
 L:	linux-sh@vger.kernel.org
 W:	http://oss.renesas.com
 Q:	http://patchwork.kernel.org/project/linux-sh/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/genesis-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git rmobile-latest
 S:	Supported
 F:	arch/arm/mach-shmobile/
 F:	drivers/sh/
@@ -2435,6 +2435,7 @@ F:	drivers/net/wan/sdla.c
 FRAMEBUFFER LAYER
 L:	linux-fbdev@vger.kernel.org
 W:	http://linux-fbdev.sourceforge.net/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6.git
 S:	Orphan
 F:	Documentation/fb/
 F:	drivers/video/fb*
@@ -5676,7 +5677,7 @@ S:	Maintained
 
 STAGING SUBSYSTEM
 M:	Greg Kroah-Hartman <gregkh@suse.de>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-next-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6.git
 L:	devel@driverdev.osuosl.org
 S:	Maintained
 F:	drivers/staging/
@@ -5705,7 +5706,7 @@ M:	Paul Mundt <lethal@linux-sh.org>
 L:	linux-sh@vger.kernel.org
 W:	http://www.linux-sh.org
 Q:	http://patchwork.kernel.org/project/linux-sh/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git sh-latest
 S:	Supported
 F:	Documentation/sh/
 F:	arch/sh/
@@ -5910,7 +5911,7 @@ S:	Maintained
 TTY LAYER
 M:	Greg Kroah-Hartman <gregkh@suse.de>
 S:	Maintained
-T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
 F:	drivers/char/tty_*
 F:	drivers/serial/serial_core.c
 F:	include/linux/serial_core.h
@@ -6233,7 +6234,7 @@ USB SUBSYSTEM
 M:	Greg Kroah-Hartman <gregkh@suse.de>
 L:	linux-usb@vger.kernel.org
 W:	http://www.linux-usb.org
-T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6.git
 S:	Supported
 F:	Documentation/usb/
 F:	drivers/net/usb/
@@ -6598,14 +6599,14 @@ F:	drivers/platform/x86
 
 XEN PCI SUBSYSTEM
 M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-L:	xen-devel@lists.xensource.com
+L:	xen-devel@lists.xensource.com (moderated for non-subscribers)
 S:	Supported
 F:	arch/x86/pci/*xen*
 F:	drivers/pci/*xen*
 
 XEN SWIOTLB SUBSYSTEM
 M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-L:	xen-devel@lists.xensource.com
+L:	xen-devel@lists.xensource.com (moderated for non-subscribers)
 S:	Supported
 F:	arch/x86/xen/*swiotlb*
 F:	drivers/xen/*swiotlb*
@@ -6613,7 +6614,7 @@ F:	drivers/xen/*swiotlb*
 XEN HYPERVISOR INTERFACE
 M:	Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
 M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-L:	xen-devel@lists.xen.org
+L:	xen-devel@lists.xensource.com (moderated for non-subscribers)
 L:	virtualization@lists.osdl.org
 S:	Supported
 F:	arch/x86/xen/

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 37
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*

arch/arm/Kconfig

@@ -6,7 +6,7 @@ config ARM
 	select HAVE_MEMBLOCK
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION
-	select GENERIC_ATOMIC64 if (!CPU_32v6K)
+	select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI)
 	select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
 	select HAVE_ARCH_KGDB
 	select HAVE_KPROBES if (!XIP_KERNEL)
@@ -646,7 +646,7 @@ config ARCH_S3C2410
 	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
 	select ARCH_USES_GETTIMEOFFSET
-	select HAVE_S3C2410_I2C
+	select HAVE_S3C2410_I2C if I2C
 	help
 	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
 	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -676,8 +676,8 @@ config ARCH_S3C64XX
 	select S3C_DEV_NAND
 	select USB_ARCH_HAS_OHCI
 	select SAMSUNG_GPIOLIB_4BIT
-	select HAVE_S3C2410_I2C
-	select HAVE_S3C2410_WATCHDOG
+	select HAVE_S3C2410_I2C if I2C
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help
 	  Samsung S3C64XX series based systems
 
@@ -686,10 +686,10 @@ config ARCH_S5P64X0
 	select CPU_V6
 	select GENERIC_GPIO
 	select HAVE_CLK
-	select HAVE_S3C2410_WATCHDOG
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select ARCH_USES_GETTIMEOFFSET
-	select HAVE_S3C2410_I2C
-	select HAVE_S3C_RTC
+	select HAVE_S3C2410_I2C if I2C
+	select HAVE_S3C_RTC if RTC_CLASS
 	help
 	  Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
 	  SMDK6450.
@@ -700,7 +700,7 @@ config ARCH_S5P6442
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select ARCH_USES_GETTIMEOFFSET
-	select HAVE_S3C2410_WATCHDOG
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help
 	  Samsung S5P6442 CPU based systems
 
@@ -711,9 +711,9 @@ config ARCH_S5PC100
 	select CPU_V7
 	select ARM_L1_CACHE_SHIFT_6
 	select ARCH_USES_GETTIMEOFFSET
-	select HAVE_S3C2410_I2C
-	select HAVE_S3C_RTC
-	select HAVE_S3C2410_WATCHDOG
+	select HAVE_S3C2410_I2C if I2C
+	select HAVE_S3C_RTC if RTC_CLASS
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help
 	  Samsung S5PC100 series based systems
 
@@ -726,9 +726,9 @@ config ARCH_S5PV210
 	select ARM_L1_CACHE_SHIFT_6
 	select ARCH_HAS_CPUFREQ
 	select ARCH_USES_GETTIMEOFFSET
-	select HAVE_S3C2410_I2C
-	select HAVE_S3C_RTC
-	select HAVE_S3C2410_WATCHDOG
+	select HAVE_S3C2410_I2C if I2C
+	select HAVE_S3C_RTC if RTC_CLASS
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help
 	  Samsung S5PV210/S5PC110 series based systems
 
@@ -739,9 +739,9 @@ config ARCH_S5PV310
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select GENERIC_CLOCKEVENTS
-	select HAVE_S3C_RTC
-	select HAVE_S3C2410_I2C
-	select HAVE_S3C2410_WATCHDOG
+	select HAVE_S3C_RTC if RTC_CLASS
+	select HAVE_S3C2410_I2C if I2C
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help
 	  Samsung S5PV310 series based systems
 

arch/arm/common/gic.c

@@ -251,15 +251,16 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
 		writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
 
 	/*
-	 * Set priority on all interrupts.
+	 * Set priority on all global interrupts.
 	 */
-	for (i = 0; i < max_irq; i += 4)
+	for (i = 32; i < max_irq; i += 4)
 		writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
 
 	/*
-	 * Disable all interrupts.
+	 * Disable all interrupts.  Leave the PPI and SGIs alone
+	 * as these enables are banked registers.
 	 */
-	for (i = 0; i < max_irq; i += 32)
+	for (i = 32; i < max_irq; i += 32)
 		writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
 
 	/*
@@ -277,11 +278,30 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
 
 void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base)
 {
+	void __iomem *dist_base;
+	int i;
+
 	if (gic_nr >= MAX_GIC_NR)
 		BUG();
 
+	dist_base = gic_data[gic_nr].dist_base;
+	BUG_ON(!dist_base);
+
 	gic_data[gic_nr].cpu_base = base;
 
+	/*
+	 * Deal with the banked PPI and SGI interrupts - disable all
+	 * PPI interrupts, ensure all SGI interrupts are enabled.
+	 */
+	writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
+	writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
+
+	/*
+	 * Set priority on PPI and SGI interrupts
+	 */
+	for (i = 0; i < 32; i += 4)
+		writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
+
 	writel(0xf0, base + GIC_CPU_PRIMASK);
 	writel(1, base + GIC_CPU_CTRL);
 }

arch/arm/include/asm/hardware/it8152.h

@@ -75,7 +75,7 @@ extern unsigned long it8152_base_address;
   IT8152_PD_IRQ(1)  USB (USBR)
   IT8152_PD_IRQ(0)  Audio controller (ACR)
  */
-#define IT8152_IRQ(x)   (IRQ_BOARD_END + (x))
+#define IT8152_IRQ(x)   (IRQ_BOARD_START + (x))
 
 /* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
 #define IT8152_LD_IRQ_COUNT     9

arch/arm/kernel/hw_breakpoint.c

@@ -748,8 +748,7 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
 		breakpoint_handler(addr, regs);
 		break;
 	case ARM_ENTRY_ASYNC_WATCHPOINT:
-		WARN_ON("Asynchronous watchpoint exception taken. "
-			"Debugging results may be unreliable");
+		WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n");
 	case ARM_ENTRY_SYNC_WATCHPOINT:
 		watchpoint_handler(addr, regs);
 		break;

arch/arm/kernel/perf_event.c

@@ -1749,7 +1749,7 @@ static inline int armv7_pmnc_has_overflowed(unsigned long pmnc)
 static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc,
 					enum armv7_counters counter)
 {
-	int ret;
+	int ret = 0;
 
 	if (counter == ARMV7_CYCLE_COUNTER)
 		ret = pmnc & ARMV7_FLAG_C;

arch/arm/kernel/stacktrace.c

@@ -28,7 +28,7 @@ int notrace unwind_frame(struct stackframe *frame)
 
 	/* only go to a higher address on the stack */
 	low = frame->sp;
-	high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE;
+	high = ALIGN(low, THREAD_SIZE);
 
 	/* check current frame pointer is within bounds */
 	if (fp < (low + 12) || fp + 4 >= high)

arch/arm/kernel/traps.c

@@ -53,10 +53,7 @@ static void dump_mem(const char *, const char *, unsigned long, unsigned long);
 void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame)
 {
 #ifdef CONFIG_KALLSYMS
-	char sym1[KSYM_SYMBOL_LEN], sym2[KSYM_SYMBOL_LEN];
-	sprint_symbol(sym1, where);
-	sprint_symbol(sym2, from);
-	printk("[<%08lx>] (%s) from [<%08lx>] (%s)\n", where, sym1, from, sym2);
+	printk("[<%08lx>] (%pS) from [<%08lx>] (%pS)\n", where, (void *)where, from, (void *)from);
 #else
 	printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from);
 #endif

arch/arm/kernel/unwind.c

@@ -279,7 +279,7 @@ int unwind_frame(struct stackframe *frame)
 
 	/* only go to a higher address on the stack */
 	low = frame->sp;
-	high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE;
+	high = ALIGN(low, THREAD_SIZE);
 
 	pr_debug("%s(pc = %08lx lr = %08lx sp = %08lx)\n", __func__,
 		 frame->pc, frame->lr, frame->sp);

arch/arm/mach-ep93xx/include/mach/dma.h

@@ -1,5 +1,13 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/dma.h
+/**
+ * DOC: EP93xx DMA M2P memory to peripheral and peripheral to memory engine
+ *
+ * The EP93xx DMA M2P subsystem handles DMA transfers between memory and
+ * peripherals. DMA M2P channels are available for audio, UARTs and IrDA.
+ * See chapter 10 of the EP93xx users guide for full details on the DMA M2P
+ * engine.
+ *
+ * See sound/soc/ep93xx/ep93xx-pcm.c for an example use of the DMA M2P code.
+ *
  */
 
 #ifndef __ASM_ARCH_DMA_H
@@ -8,12 +16,34 @@
 #include <linux/list.h>
 #include <linux/types.h>
 
+/**
+ * struct ep93xx_dma_buffer - Information about a buffer to be transferred
+ * using the DMA M2P engine
+ *
+ * @list: Entry in DMA buffer list
+ * @bus_addr: Physical address of the buffer
+ * @size: Size of the buffer in bytes
+ */
 struct ep93xx_dma_buffer {
 	struct list_head	list;
 	u32			bus_addr;
 	u16			size;
 };
 
+/**
+ * struct ep93xx_dma_m2p_client - Information about a DMA M2P client
+ *
+ * @name: Unique name for this client
+ * @flags: Client flags
+ * @cookie: User data to pass to callback functions
+ * @buffer_started: Non NULL function to call when a transfer is started.
+ * 			The arguments are the user data cookie and the DMA
+ *			buffer which is starting.
+ * @buffer_finished: Non NULL function to call when a transfer is completed.
+ *			The arguments are the user data cookie, the DMA buffer
+ *			which has completed, and a boolean flag indicating if
+ *			the transfer had an error.
+ */
 struct ep93xx_dma_m2p_client {
 	char			*name;
 	u8			flags;
@@ -24,10 +54,11 @@ struct ep93xx_dma_m2p_client {
 					struct ep93xx_dma_buffer *buf,
 					int bytes, int error);
 
-	/* Internal to the DMA code.  */
+	/* private: Internal use only */
 	void			*channel;
 };
 
+/* DMA M2P ports */
 #define EP93XX_DMA_M2P_PORT_I2S1	0x00
 #define EP93XX_DMA_M2P_PORT_I2S2	0x01
 #define EP93XX_DMA_M2P_PORT_AAC1	0x02
@@ -39,18 +70,80 @@ struct ep93xx_dma_m2p_client {
 #define EP93XX_DMA_M2P_PORT_UART3	0x08
 #define EP93XX_DMA_M2P_PORT_IRDA	0x09
 #define EP93XX_DMA_M2P_PORT_MASK	0x0f
-#define EP93XX_DMA_M2P_TX		0x00
-#define EP93XX_DMA_M2P_RX		0x10
-#define EP93XX_DMA_M2P_ABORT_ON_ERROR	0x20
-#define EP93XX_DMA_M2P_IGNORE_ERROR	0x40
-#define EP93XX_DMA_M2P_ERROR_MASK	0x60
 
-int  ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p);
+/* DMA M2P client flags */
+#define EP93XX_DMA_M2P_TX		0x00	/* Memory to peripheral */
+#define EP93XX_DMA_M2P_RX		0x10	/* Peripheral to memory */
+
+/*
+ * DMA M2P client error handling flags. See the EP93xx users guide
+ * documentation on the DMA M2P CONTROL register for more details
+ */
+#define EP93XX_DMA_M2P_ABORT_ON_ERROR	0x20	/* Abort on peripheral error */
+#define EP93XX_DMA_M2P_IGNORE_ERROR	0x40	/* Ignore peripheral errors */
+#define EP93XX_DMA_M2P_ERROR_MASK	0x60	/* Mask of error bits */
+
+/**
+ * ep93xx_dma_m2p_client_register - Register a client with the DMA M2P
+ * subsystem
+ *
+ * @m2p: Client information to register
+ * returns 0 on success
+ *
+ * The DMA M2P subsystem allocates a channel and an interrupt line for the DMA
+ * client
+ */
+int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p);
+
+/**
+ * ep93xx_dma_m2p_client_unregister - Unregister a client from the DMA M2P
+ * subsystem
+ *
+ * @m2p: Client to unregister
+ *
+ * Any transfers currently in progress will be completed in hardware, but
+ * ignored in software.
+ */
 void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *m2p);
+
+/**
+ * ep93xx_dma_m2p_submit - Submit a DMA M2P transfer
+ *
+ * @m2p: DMA Client to submit the transfer on
+ * @buf: DMA Buffer to submit
+ *
+ * If the current or next transfer positions are free on the M2P client then
+ * the transfer is started immediately. If not, the transfer is added to the
+ * list of pending transfers. This function must not be called from the
+ * buffer_finished callback for an M2P channel.
+ *
+ */
 void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *m2p,
 			   struct ep93xx_dma_buffer *buf);
+
+/**
+ * ep93xx_dma_m2p_submit_recursive - Put a DMA transfer on the pending list
+ * for an M2P channel
+ *
+ * @m2p: DMA Client to submit the transfer on
+ * @buf: DMA Buffer to submit
+ *
+ * This function must only be called from the buffer_finished callback for an
+ * M2P channel. It is commonly used to add the next transfer in a chained list
+ * of DMA transfers.
+ */
 void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *m2p,
 				     struct ep93xx_dma_buffer *buf);
+
+/**
+ * ep93xx_dma_m2p_flush - Flush all pending transfers on a DMA M2P client
+ *
+ * @m2p: DMA client to flush transfers on
+ *
+ * Any transfers currently in progress will be completed in hardware, but
+ * ignored in software.
+ *
+ */
 void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *m2p);
 
 #endif /* __ASM_ARCH_DMA_H */

arch/arm/mach-kirkwood/common.c

@@ -854,10 +854,9 @@ int __init kirkwood_find_tclk(void)
 
 	kirkwood_pcie_id(&dev, &rev);
 
-	if ((dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 ||
-					rev == MV88F6281_REV_A1)) ||
-	    (dev == MV88F6282_DEV_ID))
-		return 200000000;
+	if (dev == MV88F6281_DEV_ID || dev == MV88F6282_DEV_ID)
+		if (((readl(SAMPLE_AT_RESET) >> 21) & 1) == 0)
+			return 200000000;
 
 	return 166666667;
 }

arch/arm/mach-kirkwood/d2net_v2-setup.c

@@ -225,5 +225,5 @@ MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
 	.init_machine	= d2net_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &lacie_v2_timer,
+	.timer		= &kirkwood_timer,
 MACHINE_END

arch/arm/mach-kirkwood/lacie_v2-common.c

@@ -111,17 +111,3 @@ void __init lacie_v2_hdd_power_init(int hdd_num)
 			pr_err("Failed to power up HDD%d\n", i + 1);
 	}
 }
-
-/*****************************************************************************
- * Timer
- ****************************************************************************/
-
-static void lacie_v2_timer_init(void)
-{
-	kirkwood_tclk = 166666667;
-	orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
-}
-
-struct sys_timer lacie_v2_timer = {
-	.init = lacie_v2_timer_init,
-};

arch/arm/mach-kirkwood/lacie_v2-common.h

@@ -13,6 +13,4 @@ void lacie_v2_register_flash(void);
 void lacie_v2_register_i2c_devices(void);
 void lacie_v2_hdd_power_init(int hdd_num);
 
-extern struct sys_timer lacie_v2_timer;
-
 #endif

arch/arm/mach-kirkwood/mpp.c

@@ -59,7 +59,7 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list)
 	}
 	printk("\n");
 
-	while (*mpp_list) {
+	for ( ; *mpp_list; mpp_list++) {
 		unsigned int num = MPP_NUM(*mpp_list);
 		unsigned int sel = MPP_SEL(*mpp_list);
 		int shift, gpio_mode;
@@ -88,8 +88,6 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list)
 		if (sel != 0)
 			gpio_mode = 0;
 		orion_gpio_set_valid(num, gpio_mode);
-
-		mpp_list++;
 	}
 
 	printk(KERN_DEBUG "  final MPP regs:");

arch/arm/mach-kirkwood/netspace_v2-setup.c

@@ -262,7 +262,7 @@ MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &lacie_v2_timer,
+	.timer		= &kirkwood_timer,
 MACHINE_END
 #endif
 
@@ -272,7 +272,7 @@ MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &lacie_v2_timer,
+	.timer		= &kirkwood_timer,
 MACHINE_END
 #endif
 
@@ -282,6 +282,6 @@ MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &lacie_v2_timer,
+	.timer		= &kirkwood_timer,
 MACHINE_END
 #endif

arch/arm/mach-kirkwood/netxbig_v2-setup.c

@@ -403,7 +403,7 @@ MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
 	.init_machine	= netxbig_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &lacie_v2_timer,
+	.timer		= &kirkwood_timer,
 MACHINE_END
 #endif
 
@@ -413,6 +413,6 @@ MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
 	.init_machine	= netxbig_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &lacie_v2_timer,
+	.timer		= &kirkwood_timer,
 MACHINE_END
 #endif

arch/arm/mach-kirkwood/ts41x-setup.c

@@ -27,6 +27,10 @@
 #include "mpp.h"
 #include "tsx1x-common.h"
 
+/* for the PCIe reset workaround */
+#include <plat/pcie.h>
+
+
 #define QNAP_TS41X_JUMPER_JP1	45
 
 static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
@@ -140,8 +144,16 @@ static void __init qnap_ts41x_init(void)
 
 static int __init ts41x_pci_init(void)
 {
-	if (machine_is_ts41x())
+	if (machine_is_ts41x()) {
+		/*
+		 * Without this explicit reset, the PCIe SATA controller
+		 * (Marvell 88sx7042/sata_mv) is known to stop working
+		 * after a few minutes.
+		 */
+		orion_pcie_reset((void __iomem *)PCIE_VIRT_BASE);
+
 		kirkwood_pcie_init(KW_PCIE0);
+	}
 
    return 0;
 }

arch/arm/mach-mmp/include/mach/cputype.h

@@ -46,7 +46,8 @@ static inline int cpu_is_pxa910(void)
 #ifdef CONFIG_CPU_MMP2
 static inline int cpu_is_mmp2(void)
 {
-	return (((cpu_readid_id() >> 8) & 0xff) == 0x58);
+	return (((read_cpuid_id() >> 8) & 0xff) == 0x58);
+}
 #else
 #define cpu_is_mmp2()	(0)
 #endif

arch/arm/mach-mv78xx0/mpp.c

@@ -54,7 +54,7 @@ void __init mv78xx0_mpp_conf(unsigned int *mpp_list)
 	}
 	printk("\n");
 
-	while (*mpp_list) {
+	for ( ; *mpp_list; mpp_list++) {
 		unsigned int num = MPP_NUM(*mpp_list);
 		unsigned int sel = MPP_SEL(*mpp_list);
 		int shift, gpio_mode;
@@ -83,8 +83,6 @@ void __init mv78xx0_mpp_conf(unsigned int *mpp_list)
 		if (sel != 0)
 			gpio_mode = 0;
 		orion_gpio_set_valid(num, gpio_mode);
-
-		mpp_list++;
 	}
 
 	printk(KERN_DEBUG "  final MPP regs:");

arch/arm/mach-omap1/devices.c

@@ -321,10 +321,9 @@ static struct platform_device omap_wdt_device = {
 static int __init omap_init_wdt(void)
 {
 	if (!cpu_is_omap16xx())
-		return;
+		return -ENODEV;
 
-	platform_device_register(&omap_wdt_device);
-	return 0;
+	return platform_device_register(&omap_wdt_device);
 }
 subsys_initcall(omap_init_wdt);
 #endif

arch/arm/mach-omap1/include/mach/camera.h

@@ -1,6 +1,8 @@
 #ifndef __ASM_ARCH_CAMERA_H_
 #define __ASM_ARCH_CAMERA_H_
 
+#include <media/omap1_camera.h>
+
 void omap1_camera_init(void *);
 
 static inline void omap1_set_camera_info(struct omap1_cam_platform_data *info)

arch/arm/mach-omap2/board-devkit8000.c

@@ -242,9 +242,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
 
-	/* link regulators to MMC adapters */
-	devkit8000_vmmc1_supply.dev = mmc[0].dev;
-
 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
 

arch/arm/mach-orion5x/mpp.c

@@ -127,7 +127,7 @@ void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode)
 	/* Initialize gpiolib. */
 	orion_gpio_init();
 
-	while (mode->mpp >= 0) {
+	for ( ; mode->mpp >= 0; mode++) {
 		u32 *reg;
 		int num_type;
 		int shift;
@@ -160,8 +160,6 @@ void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode)
 			orion_gpio_set_unused(mode->mpp);
 
 		orion_gpio_set_valid(mode->mpp, !!(mode->type == MPP_GPIO));
-
-		mode++;
 	}
 
 	writel(mpp_0_7_ctrl, MPP_0_7_CTRL);

arch/arm/mach-orion5x/ts78xx-setup.c

@@ -239,7 +239,7 @@ static struct platform_nand_data ts78xx_ts_nand_data = {
 static struct resource ts78xx_ts_nand_resources = {
 	.start		= TS_NAND_DATA,
 	.end		= TS_NAND_DATA + 4,
-	.flags		= IORESOURCE_IO,
+	.flags		= IORESOURCE_MEM,
 };
 
 static struct platform_device ts78xx_ts_nand_device = {

arch/arm/mach-pxa/cm-x2xx.c

@@ -476,8 +476,6 @@ static void __init cmx2xx_init(void)
 
 static void __init cmx2xx_init_irq(void)
 {
-	pxa27x_init_irq();
-
 	if (cpu_is_pxa25x()) {
 		pxa25x_init_irq();
 		cmx2xx_pci_init_irq(CMX255_GPIO_IT8152_IRQ);

arch/arm/mach-pxa/saar.c

@@ -116,7 +116,7 @@ static struct platform_device smc91x_device = {
 	},
 };
 
-#if defined(CONFIG_FB_PXA) || (CONFIG_FB_PXA_MODULE)
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static uint16_t lcd_power_on[] = {
 	/* single frame */
 	SMART_CMD_NOOP,

arch/arm/mach-s3c64xx/Kconfig

@@ -143,7 +143,7 @@ config MACH_SMDK6410
 	select S3C_DEV_USB_HSOTG
 	select S3C_DEV_WDT
 	select SAMSUNG_DEV_KEYPAD
-	select HAVE_S3C2410_WATCHDOG
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select S3C64XX_SETUP_SDHCI
 	select S3C64XX_SETUP_I2C1
 	select S3C64XX_SETUP_IDE

arch/arm/mach-shmobile/board-ap4evb.c

@@ -163,11 +163,13 @@ static struct mtd_partition nor_flash_partitions[] = {
 		.name		= "loader",
 		.offset		= 0x00000000,
 		.size		= 512 * 1024,
+		.mask_flags	= MTD_WRITEABLE,
 	},
 	{
 		.name		= "bootenv",
 		.offset		= MTDPART_OFS_APPEND,
 		.size		= 512 * 1024,
+		.mask_flags	= MTD_WRITEABLE,
 	},
 	{
 		.name		= "kernel_ro",
@@ -499,7 +501,12 @@ static struct platform_device keysc_device = {
 static struct resource mipidsi0_resources[] = {
 	[0] = {
 		.start  = 0xffc60000,
-		.end    = 0xffc68fff,
+		.end    = 0xffc63073,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 0xffc68000,
+		.end    = 0xffc680ef,
 		.flags  = IORESOURCE_MEM,
 	},
 };
@@ -581,6 +588,10 @@ static int fsi_set_rate(int is_porta, int rate)
 		return -EINVAL;
 
 	switch (rate) {
+	case 44100:
+		clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 11283000));
+		ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+		break;
 	case 48000:
 		clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 85428000));
 		clk_set_rate(fdiv_clk, clk_round_rate(fdiv_clk, 12204000));

arch/arm/mach-shmobile/intc-sh7372.c

@@ -98,7 +98,7 @@ static struct intc_vect intca_vectors[] __initdata = {
 	INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0),
 	INTC_VECT(IRQ16A, 0x3200), INTC_VECT(IRQ17A, 0x3220),
 	INTC_VECT(IRQ18A, 0x3240), INTC_VECT(IRQ19A, 0x3260),
-	INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ31A, 0x32a0),
+	INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ21A, 0x32a0),
 	INTC_VECT(IRQ22A, 0x32c0), INTC_VECT(IRQ23A, 0x32e0),
 	INTC_VECT(IRQ24A, 0x3300), INTC_VECT(IRQ25A, 0x3320),
 	INTC_VECT(IRQ26A, 0x3340), INTC_VECT(IRQ27A, 0x3360),

arch/arm/mach-vexpress/ct-ca9x4.c

@@ -54,7 +54,9 @@ static struct map_desc ct_ca9x4_io_desc[] __initdata = {
 
 static void __init ct_ca9x4_map_io(void)
 {
+#ifdef CONFIG_LOCAL_TIMERS
 	twd_base = MMIO_P2V(A9_MPCORE_TWD);
+#endif
 	v2m_map_io(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
 }
 

arch/arm/mm/dma-mapping.c

@@ -198,7 +198,7 @@ __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot)
 	 * fragmentation of the DMA space, and also prevents allocations
 	 * smaller than a section from crossing a section boundary.
 	 */
-	bit = fls(size - 1) + 1;
+	bit = fls(size - 1);
 	if (bit > SECTION_SHIFT)
 		bit = SECTION_SHIFT;
 	align = 1 << bit;

arch/arm/plat-omap/devices.c

@@ -284,12 +284,14 @@ void __init omap_dsp_reserve_sdram_memblock(void)
 	if (!size)
 		return;
 
-	paddr = __memblock_alloc_base(size, SZ_1M, MEMBLOCK_REAL_LIMIT);
+	paddr = memblock_alloc(size, SZ_1M);
 	if (!paddr) {
 		pr_err("%s: failed to reserve %x bytes\n",
 				__func__, size);
 		return;
 	}
+	memblock_free(paddr, size);
+	memblock_remove(paddr, size);
 
 	omap_dsp_phys_mempool_base = paddr;
 }

arch/arm/plat-omap/dma.c

@@ -1983,6 +1983,8 @@ static int omap2_dma_handle_ch(int ch)
 
 	dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(ch));
 	dma_write(1 << ch, IRQSTATUS_L0);
+	/* read back the register to flush the write */
+	dma_read(IRQSTATUS_L0);
 
 	/* If the ch is not chained then chain_id will be -1 */
 	if (dma_chan[ch].chain_id != -1) {

arch/arm/plat-orion/include/plat/pcie.h

@@ -11,12 +11,15 @@
 #ifndef __PLAT_PCIE_H
 #define __PLAT_PCIE_H
 
+struct pci_bus;
+
 u32 orion_pcie_dev_id(void __iomem *base);
 u32 orion_pcie_rev(void __iomem *base);
 int orion_pcie_link_up(void __iomem *base);
 int orion_pcie_x4_mode(void __iomem *base);
 int orion_pcie_get_local_bus_nr(void __iomem *base);
 void orion_pcie_set_local_bus_nr(void __iomem *base, int nr);
+void orion_pcie_reset(void __iomem *base);
 void orion_pcie_setup(void __iomem *base,
 		      struct mbus_dram_target_info *dram);
 int orion_pcie_rd_conf(void __iomem *base, struct pci_bus *bus,

arch/arm/plat-orion/pcie.c

@@ -181,11 +181,6 @@ void __init orion_pcie_setup(void __iomem *base,
 	u16 cmd;
 	u32 mask;
 
-	/*
-	 * soft reset PCIe unit
-	 */
-	orion_pcie_reset(base);
-
 	/*
 	 * Point PCIe unit MBUS decode windows to DRAM space.
 	 */

arch/blackfin/kernel/process.c

@@ -7,7 +7,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/smp_lock.h>
 #include <linux/unistd.h>
 #include <linux/user.h>
 #include <linux/uaccess.h>

arch/frv/kernel/process.c

@@ -16,7 +16,6 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>

arch/h8300/kernel/process.c

@@ -28,7 +28,6 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>

arch/ia64/hp/sim/simscsi.c

@@ -202,7 +202,7 @@ simscsi_readwrite10 (struct scsi_cmnd *sc, int mode)
 }
 
 static int
-simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
+simscsi_queuecommand_lck (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 {
 	unsigned int target_id = sc->device->id;
 	char fname[MAX_ROOT_LEN+16];
@@ -326,6 +326,8 @@ simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 	return 0;
 }
 
+static DEF_SCSI_QCMD(simscsi_queuecommand)
+
 static int
 simscsi_host_reset (struct scsi_cmnd *sc)
 {

arch/m68k/kernel/process.c

@@ -18,7 +18,6 @@
 #include <linux/slab.h>
 #include <linux/fs.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>

arch/m68knommu/kernel/process.c

@@ -19,7 +19,6 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>

arch/mn10300/kernel/process.c

@@ -14,7 +14,6 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>

arch/parisc/hpux/sys_hpux.c

@@ -28,7 +28,6 @@
 #include <linux/namei.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/syscalls.h>
 #include <linux/utsname.h>
 #include <linux/vfs.h>

arch/parisc/kernel/sys_parisc32.c

@@ -20,7 +20,6 @@
 #include <linux/times.h>
 #include <linux/time.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/sem.h>
 #include <linux/msg.h>
 #include <linux/shm.h>

arch/powerpc/kernel/sys_ppc32.c

@@ -23,7 +23,6 @@
 #include <linux/resource.h>
 #include <linux/times.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/sem.h>
 #include <linux/msg.h>
 #include <linux/shm.h>

arch/s390/Kconfig.debug

@@ -6,6 +6,18 @@ config TRACE_IRQFLAGS_SUPPORT
 
 source "lib/Kconfig.debug"
 
+config STRICT_DEVMEM
+	def_bool y
+	prompt "Filter access to /dev/mem"
+	---help---
+	  This option restricts access to /dev/mem.  If this option is
+	  disabled, you allow userspace access to all memory, including
+	  kernel and userspace memory. Accidental memory access is likely
+	  to be disastrous.
+	  Memory access is required for experts who want to debug the kernel.
+
+	  If you are unsure, say Y.
+
 config DEBUG_STRICT_USER_COPY_CHECKS
 	bool "Strict user copy size checks"
 	---help---

arch/s390/include/asm/page.h

@@ -130,6 +130,11 @@ struct page;
 void arch_free_page(struct page *page, int order);
 void arch_alloc_page(struct page *page, int order);
 
+static inline int devmem_is_allowed(unsigned long pfn)
+{
+	return 0;
+}
+
 #define HAVE_ARCH_FREE_PAGE
 #define HAVE_ARCH_ALLOC_PAGE
 

arch/s390/kernel/compat_linux.c

@@ -25,7 +25,6 @@
 #include <linux/resource.h>
 #include <linux/times.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/sem.h>
 #include <linux/msg.h>
 #include <linux/shm.h>

arch/s390/kernel/kprobes.c

@@ -30,6 +30,7 @@
 #include <asm/sections.h>
 #include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/hardirq.h>
 
 DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
 DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
@@ -212,7 +213,7 @@ static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
 	/* Set the PER control regs, turns on single step for this address */
 	__ctl_load(kprobe_per_regs, 9, 11);
 	regs->psw.mask |= PSW_MASK_PER;
-	regs->psw.mask &= ~(PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK);
+	regs->psw.mask &= ~(PSW_MASK_IO | PSW_MASK_EXT);
 }
 
 static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
@@ -239,7 +240,7 @@ static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
 	__get_cpu_var(current_kprobe) = p;
 	/* Save the interrupt and per flags */
 	kcb->kprobe_saved_imask = regs->psw.mask &
-	    (PSW_MASK_PER | PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK);
+		(PSW_MASK_PER | PSW_MASK_IO | PSW_MASK_EXT);
 	/* Save the control regs that govern PER */
 	__ctl_store(kcb->kprobe_saved_ctl, 9, 11);
 }
@@ -316,8 +317,6 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 		return 1;
 
 ss_probe:
-	if (regs->psw.mask & (PSW_MASK_PER | PSW_MASK_IO))
-		local_irq_disable();
 	prepare_singlestep(p, regs);
 	kcb->kprobe_status = KPROBE_HIT_SS;
 	return 1;
@@ -350,6 +349,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 	struct hlist_node *node, *tmp;
 	unsigned long flags, orig_ret_address = 0;
 	unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
+	kprobe_opcode_t *correct_ret_addr = NULL;
 
 	INIT_HLIST_HEAD(&empty_rp);
 	kretprobe_hash_lock(current, &head, &flags);
@@ -372,10 +372,32 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 			/* another task is sharing our hash bucket */
 			continue;
 
-		if (ri->rp && ri->rp->handler)
-			ri->rp->handler(ri, regs);
+		orig_ret_address = (unsigned long)ri->ret_addr;
+
+		if (orig_ret_address != trampoline_address)
+			/*
+			 * This is the real return address. Any other
+			 * instances associated with this task are for
+			 * other calls deeper on the call stack
+			 */
+			break;
+	}
+
+	kretprobe_assert(ri, orig_ret_address, trampoline_address);
+
+	correct_ret_addr = ri->ret_addr;
+	hlist_for_each_entry_safe(ri, node, tmp, head, hlist) {
+		if (ri->task != current)
+			/* another task is sharing our hash bucket */
+			continue;
 
 		orig_ret_address = (unsigned long)ri->ret_addr;
+
+		if (ri->rp && ri->rp->handler) {
+			ri->ret_addr = correct_ret_addr;
+			ri->rp->handler(ri, regs);
+		}
+
 		recycle_rp_inst(ri, &empty_rp);
 
 		if (orig_ret_address != trampoline_address) {
@@ -387,7 +409,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 			break;
 		}
 	}
-	kretprobe_assert(ri, orig_ret_address, trampoline_address);
+
 	regs->psw.addr = orig_ret_address | PSW_ADDR_AMODE;
 
 	reset_current_kprobe();
@@ -465,8 +487,6 @@ static int __kprobes post_kprobe_handler(struct pt_regs *regs)
 		goto out;
 	}
 	reset_current_kprobe();
-	if (regs->psw.mask & (PSW_MASK_PER | PSW_MASK_IO))
-		local_irq_enable();
 out:
 	preempt_enable_no_resched();
 
@@ -482,7 +502,7 @@ out:
 	return 1;
 }
 
-int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+static int __kprobes kprobe_trap_handler(struct pt_regs *regs, int trapnr)
 {
 	struct kprobe *cur = kprobe_running();
 	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
@@ -508,8 +528,6 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
 			restore_previous_kprobe(kcb);
 		else {
 			reset_current_kprobe();
-			if (regs->psw.mask & (PSW_MASK_PER | PSW_MASK_IO))
-				local_irq_enable();
 		}
 		preempt_enable_no_resched();
 		break;
@@ -553,6 +571,18 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
 	return 0;
 }
 
+int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+{
+	int ret;
+
+	if (regs->psw.mask & (PSW_MASK_IO | PSW_MASK_EXT))
+		local_irq_disable();
+	ret = kprobe_trap_handler(regs, trapnr);
+	if (regs->psw.mask & (PSW_MASK_IO | PSW_MASK_EXT))
+		local_irq_restore(regs->psw.mask & ~PSW_MASK_PER);
+	return ret;
+}
+
 /*
  * Wrapper routine to for handling exceptions.
  */
@@ -560,8 +590,12 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
 				       unsigned long val, void *data)
 {
 	struct die_args *args = (struct die_args *)data;
+	struct pt_regs *regs = args->regs;
 	int ret = NOTIFY_DONE;
 
+	if (regs->psw.mask & (PSW_MASK_IO | PSW_MASK_EXT))
+		local_irq_disable();
+
 	switch (val) {
 	case DIE_BPT:
 		if (kprobe_handler(args->regs))
@@ -572,16 +606,17 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
 			ret = NOTIFY_STOP;
 		break;
 	case DIE_TRAP:
-		/* kprobe_running() needs smp_processor_id() */
-		preempt_disable();
-		if (kprobe_running() &&
-		    kprobe_fault_handler(args->regs, args->trapnr))
+		if (!preemptible() && kprobe_running() &&
+		    kprobe_trap_handler(args->regs, args->trapnr))
 			ret = NOTIFY_STOP;
-		preempt_enable();
 		break;
 	default:
 		break;
 	}
+
+	if (regs->psw.mask & (PSW_MASK_IO | PSW_MASK_EXT))
+		local_irq_restore(regs->psw.mask & ~PSW_MASK_PER);
+
 	return ret;
 }
 
@@ -595,6 +630,7 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
 
 	/* setup return addr to the jprobe handler routine */
 	regs->psw.addr = (unsigned long)(jp->entry) | PSW_ADDR_AMODE;
+	regs->psw.mask &= ~(PSW_MASK_IO | PSW_MASK_EXT);
 
 	/* r14 is the function return address */
 	kcb->jprobe_saved_r14 = (unsigned long)regs->gprs[14];

arch/s390/mm/gup.c

@@ -20,18 +20,17 @@
 static inline int gup_pte_range(pmd_t *pmdp, pmd_t pmd, unsigned long addr,
 		unsigned long end, int write, struct page **pages, int *nr)
 {
-	unsigned long mask, result;
+	unsigned long mask;
 	pte_t *ptep, pte;
 	struct page *page;
 
-	result = write ? 0 : _PAGE_RO;
-	mask = result | _PAGE_INVALID | _PAGE_SPECIAL;
+	mask = (write ? _PAGE_RO : 0) | _PAGE_INVALID | _PAGE_SPECIAL;
 
 	ptep = ((pte_t *) pmd_deref(pmd)) + pte_index(addr);
 	do {
 		pte = *ptep;
 		barrier();
-		if ((pte_val(pte) & mask) != result)
+		if ((pte_val(pte) & mask) != 0)
 			return 0;
 		VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
 		page = pte_page(pte);

arch/sparc/kernel/leon_smp.c

@@ -12,7 +12,6 @@
 #include <linux/sched.h>
 #include <linux/threads.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 #include <linux/kernel_stat.h>
 #include <linux/init.h>

arch/sparc/kernel/sys_sparc32.c

@@ -17,7 +17,6 @@
 #include <linux/resource.h>
 #include <linux/times.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/sem.h>
 #include <linux/msg.h>
 #include <linux/shm.h>

arch/sparc/kernel/sys_sparc_32.c

@@ -19,7 +19,6 @@
 #include <linux/mman.h>
 #include <linux/utsname.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/ipc.h>
 
 #include <asm/uaccess.h>

arch/sparc/kernel/unaligned_32.c

@@ -16,7 +16,6 @@
 #include <asm/system.h>
 #include <asm/uaccess.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/perf_event.h>
 
 enum direction {

arch/sparc/kernel/windows.c

@@ -9,7 +9,6 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 
 #include <asm/uaccess.h>
 

arch/tile/kernel/compat.c

@@ -21,7 +21,6 @@
 #include <linux/kdev_t.h>
 #include <linux/fs.h>
 #include <linux/fcntl.h>
-#include <linux/smp_lock.h>
 #include <linux/uaccess.h>
 #include <linux/signal.h>
 #include <asm/syscalls.h>

arch/tile/kernel/compat_signal.c

@@ -15,7 +15,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/kernel.h>
 #include <linux/signal.h>
 #include <linux/errno.h>

arch/tile/kernel/signal.c

@@ -16,7 +16,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/kernel.h>
 #include <linux/signal.h>
 #include <linux/errno.h>

arch/tile/kernel/smpboot.c

@@ -18,7 +18,6 @@
 #include <linux/mm.h>
 #include <linux/sched.h>
 #include <linux/kernel_stat.h>
-#include <linux/smp_lock.h>
 #include <linux/bootmem.h>
 #include <linux/notifier.h>
 #include <linux/cpu.h>

arch/tile/kernel/sys.c

@@ -20,7 +20,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/syscalls.h>
 #include <linux/mman.h>
 #include <linux/file.h>

arch/tile/mm/fault.c

@@ -24,7 +24,6 @@
 #include <linux/mman.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/tty.h>

arch/tile/mm/hugetlbpage.c

@@ -21,7 +21,6 @@
 #include <linux/mm.h>
 #include <linux/hugetlb.h>
 #include <linux/pagemap.h>
-#include <linux/smp_lock.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/sysctl.h>

arch/um/include/asm/ptrace-generic.h

@@ -38,8 +38,8 @@ struct pt_regs {
 
 struct task_struct;
 
-extern long subarch_ptrace(struct task_struct *child, long request, long addr,
-			   long data);
+extern long subarch_ptrace(struct task_struct *child, long request,
+	unsigned long addr, unsigned long data);
 extern unsigned long getreg(struct task_struct *child, int regno);
 extern int putreg(struct task_struct *child, int regno, unsigned long value);
 extern int get_fpregs(struct user_i387_struct __user *buf,

arch/um/kernel/exec.c

@@ -5,7 +5,6 @@
 
 #include "linux/stddef.h"
 #include "linux/fs.h"
-#include "linux/smp_lock.h"
 #include "linux/ptrace.h"
 #include "linux/sched.h"
 #include "linux/slab.h"

arch/um/kernel/ptrace.c

@@ -122,7 +122,7 @@ long arch_ptrace(struct task_struct *child, long request,
 		break;
 
 	case PTRACE_SET_THREAD_AREA:
-		ret = ptrace_set_thread_area(child, addr, datavp);
+		ret = ptrace_set_thread_area(child, addr, vp);
 		break;
 
 	case PTRACE_FAULTINFO: {

arch/x86/ia32/sys_ia32.c

@@ -28,7 +28,6 @@
 #include <linux/syscalls.h>
 #include <linux/times.h>
 #include <linux/utsname.h>
-#include <linux/smp_lock.h>
 #include <linux/mm.h>
 #include <linux/uio.h>
 #include <linux/poll.h>

arch/x86/include/asm/apic.h

@@ -141,13 +141,13 @@ static inline void native_apic_msr_write(u32 reg, u32 v)
 
 static inline u32 native_apic_msr_read(u32 reg)
 {
-	u32 low, high;
+	u64 msr;
 
 	if (reg == APIC_DFR)
 		return -1;
 
-	rdmsr(APIC_BASE_MSR + (reg >> 4), low, high);
-	return low;
+	rdmsrl(APIC_BASE_MSR + (reg >> 4), msr);
+	return (u32)msr;
 }
 
 static inline void native_x2apic_wait_icr_idle(void)
@@ -181,12 +181,12 @@ extern void enable_x2apic(void);
 extern void x2apic_icr_write(u32 low, u32 id);
 static inline int x2apic_enabled(void)
 {
-	int msr, msr2;
+	u64 msr;
 
 	if (!cpu_has_x2apic)
 		return 0;
 
-	rdmsr(MSR_IA32_APICBASE, msr, msr2);
+	rdmsrl(MSR_IA32_APICBASE, msr);
 	if (msr & X2APIC_ENABLE)
 		return 1;
 	return 0;

arch/x86/include/asm/uv/uv_mmrs.h

@@ -805,6 +805,78 @@ union uvh_node_present_table_u {
     } s;
 };
 
+/* ========================================================================= */
+/*                 UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR                  */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR 0x16000c8UL
+
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_BASE_MASK 0x00000000ff000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_M_ALIAS_SHFT 48
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_alias210_overlay_config_0_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_alias210_overlay_config_0_mmr_s {
+	unsigned long	rsvd_0_23: 24;  /*    */
+	unsigned long	base    :  8;  /* RW */
+	unsigned long	rsvd_32_47: 16;  /*    */
+	unsigned long	m_alias :  5;  /* RW */
+	unsigned long	rsvd_53_62: 10;  /*    */
+	unsigned long	enable  :  1;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                 UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR                  */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR 0x16000d8UL
+
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_BASE_MASK 0x00000000ff000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_M_ALIAS_SHFT 48
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_alias210_overlay_config_1_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_alias210_overlay_config_1_mmr_s {
+	unsigned long	rsvd_0_23: 24;  /*    */
+	unsigned long	base    :  8;  /* RW */
+	unsigned long	rsvd_32_47: 16;  /*    */
+	unsigned long	m_alias :  5;  /* RW */
+	unsigned long	rsvd_53_62: 10;  /*    */
+	unsigned long	enable  :  1;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                 UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR                  */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR 0x16000e8UL
+
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_BASE_MASK 0x00000000ff000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_M_ALIAS_SHFT 48
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_alias210_overlay_config_2_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_alias210_overlay_config_2_mmr_s {
+	unsigned long	rsvd_0_23: 24;  /*    */
+	unsigned long	base    :  8;  /* RW */
+	unsigned long	rsvd_32_47: 16;  /*    */
+	unsigned long	m_alias :  5;  /* RW */
+	unsigned long	rsvd_53_62: 10;  /*    */
+	unsigned long	enable  :  1;  /* RW */
+    } s;
+};
+
 /* ========================================================================= */
 /*                UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR                  */
 /* ========================================================================= */
@@ -856,6 +928,29 @@ union uvh_rh_gam_alias210_redirect_config_2_mmr_u {
     } s;
 };
 
+/* ========================================================================= */
+/*                          UVH_RH_GAM_CONFIG_MMR                            */
+/* ========================================================================= */
+#define UVH_RH_GAM_CONFIG_MMR 0x1600000UL
+
+#define UVH_RH_GAM_CONFIG_MMR_M_SKT_SHFT 0
+#define UVH_RH_GAM_CONFIG_MMR_M_SKT_MASK 0x000000000000003fUL
+#define UVH_RH_GAM_CONFIG_MMR_N_SKT_SHFT 6
+#define UVH_RH_GAM_CONFIG_MMR_N_SKT_MASK 0x00000000000003c0UL
+#define UVH_RH_GAM_CONFIG_MMR_MMIOL_CFG_SHFT 12
+#define UVH_RH_GAM_CONFIG_MMR_MMIOL_CFG_MASK 0x0000000000001000UL
+
+union uvh_rh_gam_config_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_config_mmr_s {
+	unsigned long	m_skt     :  6;  /* RW */
+	unsigned long	n_skt     :  4;  /* RW */
+	unsigned long	rsvd_10_11:  2;  /*    */
+	unsigned long	mmiol_cfg :  1;  /* RW */
+	unsigned long	rsvd_13_63: 51;  /*    */
+    } s;
+};
+
 /* ========================================================================= */
 /*                    UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR                      */
 /* ========================================================================= */
@@ -987,97 +1082,5 @@ union uvh_rtc1_int_config_u {
     } s;
 };
 
-/* ========================================================================= */
-/*                          UVH_SI_ADDR_MAP_CONFIG                           */
-/* ========================================================================= */
-#define UVH_SI_ADDR_MAP_CONFIG 0xc80000UL
-
-#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_SHFT 0
-#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_MASK 0x000000000000003fUL
-#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_SHFT 8
-#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_MASK 0x0000000000000f00UL
-
-union uvh_si_addr_map_config_u {
-    unsigned long	v;
-    struct uvh_si_addr_map_config_s {
-	unsigned long	m_skt :  6;  /* RW */
-	unsigned long	rsvd_6_7:  2;  /*    */
-	unsigned long	n_skt :  4;  /* RW */
-	unsigned long	rsvd_12_63: 52;  /*    */
-    } s;
-};
-
-/* ========================================================================= */
-/*                       UVH_SI_ALIAS0_OVERLAY_CONFIG                        */
-/* ========================================================================= */
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG 0xc80008UL
-
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_SHFT 24
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_SHFT 48
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_SHFT 63
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
-
-union uvh_si_alias0_overlay_config_u {
-    unsigned long	v;
-    struct uvh_si_alias0_overlay_config_s {
-	unsigned long	rsvd_0_23: 24;  /*    */
-	unsigned long	base    :  8;  /* RW */
-	unsigned long	rsvd_32_47: 16;  /*    */
-	unsigned long	m_alias :  5;  /* RW */
-	unsigned long	rsvd_53_62: 10;  /*    */
-	unsigned long	enable  :  1;  /* RW */
-    } s;
-};
-
-/* ========================================================================= */
-/*                       UVH_SI_ALIAS1_OVERLAY_CONFIG                        */
-/* ========================================================================= */
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG 0xc80010UL
-
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_SHFT 24
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_SHFT 48
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_SHFT 63
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
-
-union uvh_si_alias1_overlay_config_u {
-    unsigned long	v;
-    struct uvh_si_alias1_overlay_config_s {
-	unsigned long	rsvd_0_23: 24;  /*    */
-	unsigned long	base    :  8;  /* RW */
-	unsigned long	rsvd_32_47: 16;  /*    */
-	unsigned long	m_alias :  5;  /* RW */
-	unsigned long	rsvd_53_62: 10;  /*    */
-	unsigned long	enable  :  1;  /* RW */
-    } s;
-};
-
-/* ========================================================================= */
-/*                       UVH_SI_ALIAS2_OVERLAY_CONFIG                        */
-/* ========================================================================= */
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG 0xc80018UL
-
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_SHFT 24
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_SHFT 48
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_SHFT 63
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
-
-union uvh_si_alias2_overlay_config_u {
-    unsigned long	v;
-    struct uvh_si_alias2_overlay_config_s {
-	unsigned long	rsvd_0_23: 24;  /*    */
-	unsigned long	base    :  8;  /* RW */
-	unsigned long	rsvd_32_47: 16;  /*    */
-	unsigned long	m_alias :  5;  /* RW */
-	unsigned long	rsvd_53_62: 10;  /*    */
-	unsigned long	enable  :  1;  /* RW */
-    } s;
-};
-
 
-#endif /* _ASM_X86_UV_UV_MMRS_H */
+#endif /* __ASM_UV_MMRS_X86_H__ */

arch/x86/kernel/apic/apic.c

@@ -52,7 +52,6 @@
 #include <asm/mce.h>
 #include <asm/kvm_para.h>
 #include <asm/tsc.h>
-#include <asm/atomic.h>
 
 unsigned int num_processors;
 

arch/x86/kernel/apic/x2apic_uv_x.c

@@ -379,14 +379,14 @@ struct redir_addr {
 #define DEST_SHIFT UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT
 
 static __initdata struct redir_addr redir_addrs[] = {
-	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR, UVH_SI_ALIAS0_OVERLAY_CONFIG},
-	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR, UVH_SI_ALIAS1_OVERLAY_CONFIG},
-	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR, UVH_SI_ALIAS2_OVERLAY_CONFIG},
+	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR, UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR},
+	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR, UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR},
+	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR, UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR},
 };
 
 static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size)
 {
-	union uvh_si_alias0_overlay_config_u alias;
+	union uvh_rh_gam_alias210_overlay_config_2_mmr_u alias;
 	union uvh_rh_gam_alias210_redirect_config_2_mmr_u redirect;
 	int i;
 
@@ -660,7 +660,7 @@ void uv_nmi_init(void)
 
 void __init uv_system_init(void)
 {
-	union uvh_si_addr_map_config_u m_n_config;
+	union uvh_rh_gam_config_mmr_u  m_n_config;
 	union uvh_node_id_u node_id;
 	unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size;
 	int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val;
@@ -670,7 +670,7 @@ void __init uv_system_init(void)
 
 	map_low_mmrs();
 
-	m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG);
+	m_n_config.v = uv_read_local_mmr(UVH_RH_GAM_CONFIG_MMR );
 	m_val = m_n_config.s.m_skt;
 	n_val = m_n_config.s.n_skt;
 	mmr_base =

arch/x86/kernel/cpu/perf_event_amd.c

@@ -280,11 +280,11 @@ static struct amd_nb *amd_alloc_nb(int cpu, int nb_id)
 	struct amd_nb *nb;
 	int i;
 
-	nb = kmalloc(sizeof(struct amd_nb), GFP_KERNEL);
+	nb = kmalloc_node(sizeof(struct amd_nb), GFP_KERNEL | __GFP_ZERO,
+			  cpu_to_node(cpu));
 	if (!nb)
 		return NULL;
 
-	memset(nb, 0, sizeof(*nb));
 	nb->nb_id = nb_id;
 
 	/*

arch/x86/kernel/cpuid.c

@@ -33,7 +33,6 @@
 #include <linux/init.h>
 #include <linux/poll.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/device.h>

arch/x86/kernel/microcode_amd.c

@@ -212,7 +212,7 @@ static int install_equiv_cpu_table(const u8 *buf)
 		return 0;
 	}
 
-	equiv_cpu_table = (struct equiv_cpu_entry *) vmalloc(size);
+	equiv_cpu_table = vmalloc(size);
 	if (!equiv_cpu_table) {
 		pr_err("failed to allocate equivalent CPU table\n");
 		return 0;

arch/x86/kernel/mmconf-fam10h_64.c

@@ -217,13 +217,13 @@ void __cpuinit fam10h_check_enable_mmcfg(void)
 	wrmsrl(address, val);
 }
 
-static int __devinit set_check_enable_amd_mmconf(const struct dmi_system_id *d)
+static int __init set_check_enable_amd_mmconf(const struct dmi_system_id *d)
 {
         pci_probe |= PCI_CHECK_ENABLE_AMD_MMCONF;
         return 0;
 }
 
-static const struct dmi_system_id __cpuinitconst mmconf_dmi_table[] = {
+static const struct dmi_system_id __initconst mmconf_dmi_table[] = {
         {
                 .callback = set_check_enable_amd_mmconf,
                 .ident = "Sun Microsystems Machine",
@@ -234,7 +234,8 @@ static const struct dmi_system_id __cpuinitconst mmconf_dmi_table[] = {
 	{}
 };
 
-void __cpuinit check_enable_amd_mmconf_dmi(void)
+/* Called from a __cpuinit function, but only on the BSP. */
+void __ref check_enable_amd_mmconf_dmi(void)
 {
 	dmi_check_system(mmconf_dmi_table);
 }

arch/x86/kernel/msr.c

@@ -30,7 +30,6 @@
 #include <linux/init.h>
 #include <linux/poll.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/device.h>

arch/x86/kernel/pvclock.c

@@ -41,44 +41,6 @@ void pvclock_set_flags(u8 flags)
 	valid_flags = flags;
 }
 
-/*
- * Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction,
- * yielding a 64-bit result.
- */
-static inline u64 scale_delta(u64 delta, u32 mul_frac, int shift)
-{
-	u64 product;
-#ifdef __i386__
-	u32 tmp1, tmp2;
-#endif
-
-	if (shift < 0)
-		delta >>= -shift;
-	else
-		delta <<= shift;
-
-#ifdef __i386__
-	__asm__ (
-		"mul  %5       ; "
-		"mov  %4,%%eax ; "
-		"mov  %%edx,%4 ; "
-		"mul  %5       ; "
-		"xor  %5,%5    ; "
-		"add  %4,%%eax ; "
-		"adc  %5,%%edx ; "
-		: "=A" (product), "=r" (tmp1), "=r" (tmp2)
-		: "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) );
-#elif defined(__x86_64__)
-	__asm__ (
-		"mul %%rdx ; shrd $32,%%rdx,%%rax"
-		: "=a" (product) : "0" (delta), "d" ((u64)mul_frac) );
-#else
-#error implement me!
-#endif
-
-	return product;
-}
-
 static u64 pvclock_get_nsec_offset(struct pvclock_shadow_time *shadow)
 {
 	u64 delta = native_read_tsc() - shadow->tsc_timestamp;

arch/x86/mm/tlb.c

@@ -251,7 +251,7 @@ static void __cpuinit calculate_tlb_offset(void)
 	}
 }
 
-static int tlb_cpuhp_notify(struct notifier_block *n,
+static int __cpuinit tlb_cpuhp_notify(struct notifier_block *n,
 		unsigned long action, void *hcpu)
 {
 	switch (action & 0xf) {

arch/x86/pci/acpi.c

@@ -138,7 +138,6 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
 	struct acpi_resource_address64 addr;
 	acpi_status status;
 	unsigned long flags;
-	struct resource *root, *conflict;
 	u64 start, end;
 
 	status = resource_to_addr(acpi_res, &addr);
@@ -146,12 +145,10 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
 		return AE_OK;
 
 	if (addr.resource_type == ACPI_MEMORY_RANGE) {
-		root = &iomem_resource;
 		flags = IORESOURCE_MEM;
 		if (addr.info.mem.caching == ACPI_PREFETCHABLE_MEMORY)
 			flags |= IORESOURCE_PREFETCH;
 	} else if (addr.resource_type == ACPI_IO_RANGE) {
-		root = &ioport_resource;
 		flags = IORESOURCE_IO;
 	} else
 		return AE_OK;
@@ -172,25 +169,90 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
 		return AE_OK;
 	}
 
-	conflict = insert_resource_conflict(root, res);
-	if (conflict) {
-		dev_err(&info->bridge->dev,
-			"address space collision: host bridge window %pR "
-			"conflicts with %s %pR\n",
-			res, conflict->name, conflict);
-	} else {
-		pci_bus_add_resource(info->bus, res, 0);
-		info->res_num++;
-		if (addr.translation_offset)
-			dev_info(&info->bridge->dev, "host bridge window %pR "
-				 "(PCI address [%#llx-%#llx])\n",
-				 res, res->start - addr.translation_offset,
-				 res->end - addr.translation_offset);
+	info->res_num++;
+	if (addr.translation_offset)
+		dev_info(&info->bridge->dev, "host bridge window %pR "
+			 "(PCI address [%#llx-%#llx])\n",
+			 res, res->start - addr.translation_offset,
+			 res->end - addr.translation_offset);
+	else
+		dev_info(&info->bridge->dev, "host bridge window %pR\n", res);
+
+	return AE_OK;
+}
+
+static bool resource_contains(struct resource *res, resource_size_t point)
+{
+	if (res->start <= point && point <= res->end)
+		return true;
+	return false;
+}
+
+static void coalesce_windows(struct pci_root_info *info, int type)
+{
+	int i, j;
+	struct resource *res1, *res2;
+
+	for (i = 0; i < info->res_num; i++) {
+		res1 = &info->res[i];
+		if (!(res1->flags & type))
+			continue;
+
+		for (j = i + 1; j < info->res_num; j++) {
+			res2 = &info->res[j];
+			if (!(res2->flags & type))
+				continue;
+
+			/*
+			 * I don't like throwing away windows because then
+			 * our resources no longer match the ACPI _CRS, but
+			 * the kernel resource tree doesn't allow overlaps.
+			 */
+			if (resource_contains(res1, res2->start) ||
+			    resource_contains(res1, res2->end) ||
+			    resource_contains(res2, res1->start) ||
+			    resource_contains(res2, res1->end)) {
+				res1->start = min(res1->start, res2->start);
+				res1->end = max(res1->end, res2->end);
+				dev_info(&info->bridge->dev,
+					 "host bridge window expanded to %pR; %pR ignored\n",
+					 res1, res2);
+				res2->flags = 0;
+			}
+		}
+	}
+}
+
+static void add_resources(struct pci_root_info *info)
+{
+	int i;
+	struct resource *res, *root, *conflict;
+
+	if (!pci_use_crs)
+		return;
+
+	coalesce_windows(info, IORESOURCE_MEM);
+	coalesce_windows(info, IORESOURCE_IO);
+
+	for (i = 0; i < info->res_num; i++) {
+		res = &info->res[i];
+
+		if (res->flags & IORESOURCE_MEM)
+			root = &iomem_resource;
+		else if (res->flags & IORESOURCE_IO)
+			root = &ioport_resource;
 		else
-			dev_info(&info->bridge->dev,
-				 "host bridge window %pR\n", res);
+			continue;
+
+		conflict = insert_resource_conflict(root, res);
+		if (conflict)
+			dev_err(&info->bridge->dev,
+				"address space collision: host bridge window %pR "
+				"conflicts with %s %pR\n",
+				res, conflict->name, conflict);
+		else
+			pci_bus_add_resource(info->bus, res, 0);
 	}
-	return AE_OK;
 }
 
 static void
@@ -224,6 +286,7 @@ get_current_resources(struct acpi_device *device, int busnum,
 	acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
 				&info);
 
+	add_resources(&info);
 	return;
 
 name_alloc_fail:

arch/x86/pci/xen.c

@@ -147,8 +147,10 @@ static int xen_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 		irq = xen_allocate_pirq(v[i], 0, /* not sharable */
 			(type == PCI_CAP_ID_MSIX) ?
 			"pcifront-msi-x" : "pcifront-msi");
-		if (irq < 0)
-			return -1;
+		if (irq < 0) {
+			ret = -1;
+			goto free;
+		}
 
 		ret = set_irq_msi(irq, msidesc);
 		if (ret)
@@ -164,7 +166,7 @@ error:
 	if (ret == -ENODEV)
 		dev_err(&dev->dev, "Xen PCI frontend has not registered" \
 			" MSI/MSI-X support!\n");
-
+free:
 	kfree(v);
 	return ret;
 }

arch/x86/platform/uv/tlb_uv.c

@@ -1343,8 +1343,8 @@ uv_activation_descriptor_init(int node, int pnode)
 	 * each bau_desc is 64 bytes; there are 8 (UV_ITEMS_PER_DESCRIPTOR)
 	 * per cpu; and up to 32 (UV_ADP_SIZE) cpu's per uvhub
 	 */
-	bau_desc = (struct bau_desc *)kmalloc_node(sizeof(struct bau_desc)*
-		UV_ADP_SIZE*UV_ITEMS_PER_DESCRIPTOR, GFP_KERNEL, node);
+	bau_desc = kmalloc_node(sizeof(struct bau_desc) * UV_ADP_SIZE
+				* UV_ITEMS_PER_DESCRIPTOR, GFP_KERNEL, node);
 	BUG_ON(!bau_desc);
 
 	pa = uv_gpa(bau_desc); /* need the real nasid*/
@@ -1402,9 +1402,9 @@ uv_payload_queue_init(int node, int pnode)
 	struct bau_payload_queue_entry *pqp_malloc;
 	struct bau_control *bcp;
 
-	pqp = (struct bau_payload_queue_entry *) kmalloc_node(
-		(DEST_Q_SIZE + 1) * sizeof(struct bau_payload_queue_entry),
-		GFP_KERNEL, node);
+	pqp = kmalloc_node((DEST_Q_SIZE + 1)
+			   * sizeof(struct bau_payload_queue_entry),
+			   GFP_KERNEL, node);
 	BUG_ON(!pqp);
 	pqp_malloc = pqp;
 
@@ -1520,8 +1520,7 @@ static void __init uv_init_per_cpu(int nuvhubs)
 
 	timeout_us = calculate_destination_timeout();
 
-	uvhub_descs = (struct uvhub_desc *)
-		kmalloc(nuvhubs * sizeof(struct uvhub_desc), GFP_KERNEL);
+	uvhub_descs = kmalloc(nuvhubs * sizeof(struct uvhub_desc), GFP_KERNEL);
 	memset(uvhub_descs, 0, nuvhubs * sizeof(struct uvhub_desc));
 	uvhub_mask = kzalloc((nuvhubs+7)/8, GFP_KERNEL);
 	for_each_present_cpu(cpu) {

arch/x86/xen/mmu.c

@@ -2126,7 +2126,7 @@ __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
 {
 	pmd_t *kernel_pmd;
 
-	level2_kernel_pgt = extend_brk(sizeof(pmd_t *) * PTRS_PER_PMD, PAGE_SIZE);
+	level2_kernel_pgt = extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE);
 
 	max_pfn_mapped = PFN_DOWN(__pa(xen_start_info->pt_base) +
 				  xen_start_info->nr_pt_frames * PAGE_SIZE +

arch/x86/xen/setup.c

@@ -118,16 +118,18 @@ static unsigned long __init xen_return_unused_memory(unsigned long max_pfn,
 						     const struct e820map *e820)
 {
 	phys_addr_t max_addr = PFN_PHYS(max_pfn);
-	phys_addr_t last_end = 0;
+	phys_addr_t last_end = ISA_END_ADDRESS;
 	unsigned long released = 0;
 	int i;
 
+	/* Free any unused memory above the low 1Mbyte. */
 	for (i = 0; i < e820->nr_map && last_end < max_addr; i++) {
 		phys_addr_t end = e820->map[i].addr;
 		end = min(max_addr, end);
 
-		released += xen_release_chunk(last_end, end);
-		last_end = e820->map[i].addr + e820->map[i].size;
+		if (last_end < end)
+			released += xen_release_chunk(last_end, end);
+		last_end = max(last_end, e820->map[i].addr + e820->map[i].size);
 	}
 
 	if (last_end < max_addr)
@@ -164,6 +166,7 @@ char * __init xen_memory_setup(void)
 		XENMEM_memory_map;
 	rc = HYPERVISOR_memory_op(op, &memmap);
 	if (rc == -ENOSYS) {
+		BUG_ON(xen_initial_domain());
 		memmap.nr_entries = 1;
 		map[0].addr = 0ULL;
 		map[0].size = mem_end;
@@ -201,12 +204,13 @@ char * __init xen_memory_setup(void)
 	}
 
 	/*
-	 * Even though this is normal, usable memory under Xen, reserve
-	 * ISA memory anyway because too many things think they can poke
+	 * In domU, the ISA region is normal, usable memory, but we
+	 * reserve ISA memory anyway because too many things poke
 	 * about in there.
 	 *
-	 * In a dom0 kernel, this region is identity mapped with the
-	 * hardware ISA area, so it really is out of bounds.
+	 * In Dom0, the host E820 information can leave gaps in the
+	 * ISA range, which would cause us to release those pages.  To
+	 * avoid this, we unconditionally reserve them here.
 	 */
 	e820_add_region(ISA_START_ADDRESS, ISA_END_ADDRESS - ISA_START_ADDRESS,
 			E820_RESERVED);

block/blk-core.c

@@ -1194,13 +1194,6 @@ static int __make_request(struct request_queue *q, struct bio *bio)
 	int where = ELEVATOR_INSERT_SORT;
 	int rw_flags;
 
-	/* REQ_HARDBARRIER is no more */
-	if (WARN_ONCE(bio->bi_rw & REQ_HARDBARRIER,
-		"block: HARDBARRIER is deprecated, use FLUSH/FUA instead\n")) {
-		bio_endio(bio, -EOPNOTSUPP);
-		return 0;
-	}
-
 	/*
 	 * low level driver can indicate that it wants pages above a
 	 * certain limit bounced to low memory (ie for highmem, or even
@@ -1351,7 +1344,7 @@ static void handle_bad_sector(struct bio *bio)
 			bdevname(bio->bi_bdev, b),
 			bio->bi_rw,
 			(unsigned long long)bio->bi_sector + bio_sectors(bio),
-			(long long)(bio->bi_bdev->bd_inode->i_size >> 9));
+			(long long)(i_size_read(bio->bi_bdev->bd_inode) >> 9));
 
 	set_bit(BIO_EOF, &bio->bi_flags);
 }
@@ -1404,7 +1397,7 @@ static inline int bio_check_eod(struct bio *bio, unsigned int nr_sectors)
 		return 0;
 
 	/* Test device or partition size, when known. */
-	maxsector = bio->bi_bdev->bd_inode->i_size >> 9;
+	maxsector = i_size_read(bio->bi_bdev->bd_inode) >> 9;
 	if (maxsector) {
 		sector_t sector = bio->bi_sector;
 

block/blk-ioc.c

@@ -153,20 +153,6 @@ struct io_context *get_io_context(gfp_t gfp_flags, int node)
 }
 EXPORT_SYMBOL(get_io_context);
 
-void copy_io_context(struct io_context **pdst, struct io_context **psrc)
-{
-	struct io_context *src = *psrc;
-	struct io_context *dst = *pdst;
-
-	if (src) {
-		BUG_ON(atomic_long_read(&src->refcount) == 0);
-		atomic_long_inc(&src->refcount);
-		put_io_context(dst);
-		*pdst = src;
-	}
-}
-EXPORT_SYMBOL(copy_io_context);
-
 static int __init blk_ioc_init(void)
 {
 	iocontext_cachep = kmem_cache_create("blkdev_ioc",

block/blk-map.c

@@ -205,6 +205,8 @@ int blk_rq_map_user_iov(struct request_queue *q, struct request *rq,
 			unaligned = 1;
 			break;
 		}
+		if (!iov[i].iov_len)
+			return -EINVAL;
 	}
 
 	if (unaligned || (q->dma_pad_mask & len) || map_data)