Merge branches 'sh/compressors' and 'sh/stable-updates'

arch/arm/configs/u300_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc1
-# Thu Jul  2 00:16:59 2009
+# Linux kernel version: 2.6.31-rc3
+# Thu Jul 16 23:36:10 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -9,7 +9,6 @@ CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-CONFIG_HAVE_TCM=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -113,7 +112,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBDAF=y
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -542,13 +541,14 @@ CONFIG_INPUT_EVDEV=y
 #
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -911,7 +911,6 @@ CONFIG_REGULATOR=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
 CONFIG_FILE_LOCKING=y
@@ -1122,7 +1121,6 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y

arch/arm/mach-ep93xx/dma-m2p.c

@@ -33,6 +33,7 @@
 #include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
+#include <linux/io.h>
 
 #include <mach/dma.h>
 #include <mach/hardware.h>

arch/arm/mach-kirkwood/mpp.h

@@ -289,7 +289,7 @@
 
 #define MPP48_GPIO		MPP( 48, 0x0, 1, 1, 0,   0,   0,   1    )
 #define MPP48_TSMP12		MPP( 48, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP48_TDM_DTX		MPP( 48. 0x2, 0, 1, 0,   0,   0,   1    )
+#define MPP48_TDM_DTX		MPP( 48, 0x2, 0, 1, 0,   0,   0,   1    )
 
 #define MPP49_GPIO		MPP( 49, 0x0, 1, 1, 0,   0,   0,   1    )
 #define MPP49_TSMP9		MPP( 49, 0x1, 1, 1, 0,   0,   0,   1    )

arch/arm/mach-mx3/Kconfig

@@ -36,6 +36,14 @@ config MACH_PCM037
 	  Include support for Phytec pcm037 platform. This includes
 	  specific configurations for the board and its peripherals.
 
+config MACH_PCM037_EET
+	bool "Support pcm037 EET board extensions"
+	depends on MACH_PCM037
+	help
+	  Add support for PCM037 EET baseboard extensions. If you are using the
+	  OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
+	  command-line parameter.
+
 config MACH_MX31LITE
 	bool "Support MX31 LITEKIT (LogicPD)"
 	select ARCH_MX31

arch/arm/mach-mx3/Makefile

@@ -11,6 +11,7 @@ obj-$(CONFIG_MACH_MX31ADS)	+= mx31ads.o
 obj-$(CONFIG_MACH_MX31LILLY)	+= mx31lilly.o mx31lilly-db.o
 obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o
 obj-$(CONFIG_MACH_PCM037)	+= pcm037.o
+obj-$(CONFIG_MACH_PCM037_EET)	+= pcm037_eet.o
 obj-$(CONFIG_MACH_MX31_3DS)	+= mx31pdk.o
 obj-$(CONFIG_MACH_MX31MOBOARD)	+= mx31moboard.o mx31moboard-devboard.o \
 				   mx31moboard-marxbot.o

arch/arm/mach-mx3/armadillo5x0.c

@@ -31,6 +31,8 @@
 #include <linux/smsc911x.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -46,8 +48,10 @@
 #include <mach/mmc.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
+#include <mach/mxc_nand.h>
 
 #include "devices.h"
+#include "crm_regs.h"
 
 static int armadillo5x0_pins[] = {
 	/* UART1 */
@@ -93,7 +97,56 @@ static int armadillo5x0_pins[] = {
 	MX31_PIN_FPSHIFT__FPSHIFT,
 	MX31_PIN_DRDY0__DRDY0,
 	IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
+};
 
+/*
+ * NAND Flash
+ */
+static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = {
+	.width		= 1,
+	.hw_ecc		= 1,
+};
+
+/*
+ * MTD NOR Flash
+ */
+static struct mtd_partition armadillo5x0_nor_flash_partitions[] = {
+	{
+		.name		= "nor.bootloader",
+		.offset		= 0x00000000,
+		.size		= 4*32*1024,
+	}, {
+		.name		= "nor.kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 16*128*1024,
+	}, {
+		.name		= "nor.userland",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 110*128*1024,
+	}, {
+		.name		= "nor.config",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 1*128*1024,
+	},
+};
+
+static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
+	.width		= 2,
+	.parts		= armadillo5x0_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(armadillo5x0_nor_flash_partitions),
+};
+
+static struct resource armadillo5x0_nor_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= CS0_BASE_ADDR,
+	.end		= CS0_BASE_ADDR + SZ_64M - 1,
+};
+
+static struct platform_device armadillo5x0_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= -1,
+	.num_resources		= 1,
+	.resource		= &armadillo5x0_nor_flash_resource,
 };
 
 /*
@@ -272,6 +325,16 @@ static void __init armadillo5x0_init(void)
 	/* Register FB */
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+
+	/* Register NOR Flash */
+	mxc_register_device(&armadillo5x0_nor_flash,
+			    &armadillo5x0_nor_flash_pdata);
+
+	/* Register NAND Flash */
+	mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata);
+
+	/* set NAND page size to 2k if not configured via boot mode pins */
+	__raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
 }
 
 static void __init armadillo5x0_timer_init(void)

arch/arm/mach-mx3/devices.c

@@ -22,7 +22,6 @@
 #include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/gpio.h>
-#include <linux/dma-mapping.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/common.h>

arch/arm/mach-mx3/pcm037.c

@@ -18,7 +18,7 @@
 
 #include <linux/types.h>
 #include <linux/init.h>
-
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/plat-ram.h>
@@ -33,29 +33,67 @@
 #include <linux/irq.h>
 #include <linux/fsl_devices.h>
 
-#include <mach/hardware.h>
+#include <media/soc_camera.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
+#include <mach/board-pcm037.h>
 #include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/ipu.h>
-#include <mach/board-pcm037.h>
+#include <mach/mmc.h>
+#include <mach/mx3_camera.h>
 #include <mach/mx3fb.h>
 #include <mach/mxc_nand.h>
-#include <mach/mmc.h>
-#ifdef CONFIG_I2C_IMX
-#include <mach/i2c.h>
-#endif
 
 #include "devices.h"
+#include "pcm037.h"
+
+static enum pcm037_board_variant pcm037_instance = PCM037_PCM970;
+
+static int __init pcm037_variant_setup(char *str)
+{
+	if (!strcmp("eet", str))
+		pcm037_instance = PCM037_EET;
+	else if (strcmp("pcm970", str))
+		pr_warning("Unknown pcm037 baseboard variant %s\n", str);
+
+	return 1;
+}
+
+/* Supported values: "pcm970" (default) and "eet" */
+__setup("pcm037_variant=", pcm037_variant_setup);
+
+enum pcm037_board_variant pcm037_variant(void)
+{
+	return pcm037_instance;
+}
+
+/* UART1 with RTS/CTS handshake signals */
+static unsigned int pcm037_uart1_handshake_pins[] = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+};
+
+/* UART1 without RTS/CTS handshake signals */
+static unsigned int pcm037_uart1_pins[] = {
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+};
 
 static unsigned int pcm037_pins[] = {
 	/* I2C */
 	MX31_PIN_CSPI2_MOSI__SCL,
 	MX31_PIN_CSPI2_MISO__SDA,
+	MX31_PIN_CSPI2_SS2__I2C3_SDA,
+	MX31_PIN_CSPI2_SCLK__I2C3_SCL,
 	/* SDHC1 */
 	MX31_PIN_SD1_DATA3__SD1_DATA3,
 	MX31_PIN_SD1_DATA2__SD1_DATA2,
@@ -73,11 +111,6 @@ static unsigned int pcm037_pins[] = {
 	MX31_PIN_CSPI1_SS0__SS0,
 	MX31_PIN_CSPI1_SS1__SS1,
 	MX31_PIN_CSPI1_SS2__SS2,
-	/* UART1 */
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
 	/* UART2 */
 	MX31_PIN_TXD2__TXD2,
 	MX31_PIN_RXD2__RXD2,
@@ -120,6 +153,22 @@ static unsigned int pcm037_pins[] = {
 	MX31_PIN_D3_SPL__D3_SPL,
 	MX31_PIN_D3_CLS__D3_CLS,
 	MX31_PIN_LCS0__GPI03_23,
+	/* CSI */
+	IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO),
+	MX31_PIN_CSI_D6__CSI_D6,
+	MX31_PIN_CSI_D7__CSI_D7,
+	MX31_PIN_CSI_D8__CSI_D8,
+	MX31_PIN_CSI_D9__CSI_D9,
+	MX31_PIN_CSI_D10__CSI_D10,
+	MX31_PIN_CSI_D11__CSI_D11,
+	MX31_PIN_CSI_D12__CSI_D12,
+	MX31_PIN_CSI_D13__CSI_D13,
+	MX31_PIN_CSI_D14__CSI_D14,
+	MX31_PIN_CSI_D15__CSI_D15,
+	MX31_PIN_CSI_HSYNC__CSI_HSYNC,
+	MX31_PIN_CSI_MCLK__CSI_MCLK,
+	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
+	MX31_PIN_CSI_VSYNC__CSI_VSYNC,
 };
 
 static struct physmap_flash_data pcm037_flash_data = {
@@ -250,19 +299,43 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = {
 	.hw_ecc = 1,
 };
 
-#ifdef CONFIG_I2C_IMX
 static struct imxi2c_platform_data pcm037_i2c_1_data = {
 	.bitrate = 100000,
 };
 
+static struct imxi2c_platform_data pcm037_i2c_2_data = {
+	.bitrate = 20000,
+};
+
 static struct at24_platform_data board_eeprom = {
 	.byte_len = 4096,
 	.page_size = 32,
 	.flags = AT24_FLAG_ADDR16,
 };
 
+static int pcm037_camera_power(struct device *dev, int on)
+{
+	/* disable or enable the camera in X7 or X8 PCM970 connector */
+	gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), !on);
+	return 0;
+}
+
+static struct i2c_board_info pcm037_i2c_2_devices[] = {
+	{
+		I2C_BOARD_INFO("mt9t031", 0x5d),
+	},
+};
+
+static struct soc_camera_link iclink = {
+	.bus_id		= 0,		/* Must match with the camera ID */
+	.power		= pcm037_camera_power,
+	.board_info	= &pcm037_i2c_2_devices[0],
+	.i2c_adapter_id	= 2,
+	.module_name	= "mt9t031",
+};
+
 static struct i2c_board_info pcm037_i2c_devices[] = {
-       {
+	{
 		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
 		.platform_data = &board_eeprom,
 	}, {
@@ -270,7 +343,14 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
 		.type = "pcf8563",
 	}
 };
-#endif
+
+static struct platform_device pcm037_camera = {
+	.name	= "soc-camera-pdrv",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &iclink,
+	},
+};
 
 /* Not connected by default */
 #ifdef PCM970_SDHC_RW_SWITCH
@@ -334,9 +414,41 @@ static struct imxmmc_platform_data sdhc_pdata = {
 	.exit = pcm970_sdhc1_exit,
 };
 
+struct mx3_camera_pdata camera_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
+	.mclk_10khz	= 2000,
+};
+
+static int __init pcm037_camera_alloc_dma(const size_t buf_size)
+{
+	dma_addr_t dma_handle;
+	void *buf;
+	int dma;
+
+	if (buf_size < 2 * 1024 * 1024)
+		return -EINVAL;
+
+	buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
+	if (!buf) {
+		pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
+		return -ENOMEM;
+	}
+
+	memset(buf, 0, buf_size);
+
+	dma = dma_declare_coherent_memory(&mx3_camera.dev,
+					dma_handle, dma_handle, buf_size,
+					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+
+	/* The way we call dma_declare_coherent_memory only a malloc can fail */
+	return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
+}
+
 static struct platform_device *devices[] __initdata = {
 	&pcm037_flash,
 	&pcm037_sram_device,
+	&pcm037_camera,
 };
 
 static struct ipu_platform_data mx3_ipu_data = {
@@ -377,6 +489,22 @@ static const struct fb_videomode fb_modedb[] = {
 		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
 		.vmode		= FB_VMODE_NONINTERLACED,
 		.flag		= 0,
+	}, {
+		/* 240x320 @ 60 Hz */
+		.name		= "CMEL-OLED",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 185925,
+		.left_margin	= 9,
+		.right_margin	= 16,
+		.upper_margin	= 7,
+		.lower_margin	= 9,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
 	},
 };
 
@@ -397,6 +525,14 @@ static void __init mxc_board_init(void)
 	mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
 			"pcm037");
 
+	if (pcm037_variant() == PCM037_EET)
+		mxc_iomux_setup_multiple_pins(pcm037_uart1_pins,
+			ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1");
+	else
+		mxc_iomux_setup_multiple_pins(pcm037_uart1_handshake_pins,
+			ARRAY_SIZE(pcm037_uart1_handshake_pins),
+			"pcm037_uart1");
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
@@ -415,18 +551,30 @@ static void __init mxc_board_init(void)
 	}
 
 
-#ifdef CONFIG_I2C_IMX
+	/* I2C adapters and devices */
 	i2c_register_board_info(1, pcm037_i2c_devices,
 			ARRAY_SIZE(pcm037_i2c_devices));
 
 	mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data);
-#endif
+	mxc_register_device(&mxc_i2c_device2, &pcm037_i2c_2_data);
+
 	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
 	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);
 	if (!gpio_usbotg_hs_activate())
 		mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+
+	/* CSI */
+	/* Camera power: default - off */
+	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power");
+	if (!ret)
+		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
+	else
+		iclink.power = NULL;
+
+	if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
+		mxc_register_device(&mx3_camera, &camera_pdata);
 }
 
 static void __init pcm037_timer_init(void)
@@ -448,4 +596,3 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	.init_machine   = mxc_board_init,
 	.timer          = &pcm037_timer,
 MACHINE_END
-

arch/arm/mach-mx3/pcm037.h

@@ -0,0 +1,11 @@
+#ifndef __PCM037_H__
+#define __PCM037_H__
+
+enum pcm037_board_variant {
+	PCM037_PCM970,
+	PCM037_EET,
+};
+
+extern enum pcm037_board_variant pcm037_variant(void);
+
+#endif

arch/arm/mach-mx3/pcm037_eet.c

@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) 2009
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <mach/common.h>
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+#include <mach/spi.h>
+#endif
+#include <mach/iomux-mx3.h>
+
+#include <asm/mach-types.h>
+
+#include "pcm037.h"
+#include "devices.h"
+
+static unsigned int pcm037_eet_pins[] = {
+	/* SPI #1 */
+	MX31_PIN_CSPI1_MISO__MISO,
+	MX31_PIN_CSPI1_MOSI__MOSI,
+	MX31_PIN_CSPI1_SCLK__SCLK,
+	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI1_SS0__SS0,
+	MX31_PIN_CSPI1_SS1__SS1,
+	MX31_PIN_CSPI1_SS2__SS2,
+
+	/* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
+	IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO),
+	/* GPIO keys */
+	IOMUX_MODE(MX31_PIN_GPIO1_0,	IOMUX_CONFIG_GPIO), /* 0 */
+	IOMUX_MODE(MX31_PIN_GPIO1_1,	IOMUX_CONFIG_GPIO), /* 1 */
+	IOMUX_MODE(MX31_PIN_GPIO1_2,	IOMUX_CONFIG_GPIO), /* 2 */
+	IOMUX_MODE(MX31_PIN_GPIO1_3,	IOMUX_CONFIG_GPIO), /* 3 */
+	IOMUX_MODE(MX31_PIN_SVEN0,	IOMUX_CONFIG_GPIO), /* 32 */
+	IOMUX_MODE(MX31_PIN_STX0,	IOMUX_CONFIG_GPIO), /* 33 */
+	IOMUX_MODE(MX31_PIN_SRX0,	IOMUX_CONFIG_GPIO), /* 34 */
+	IOMUX_MODE(MX31_PIN_SIMPD0,	IOMUX_CONFIG_GPIO), /* 35 */
+	IOMUX_MODE(MX31_PIN_RTS1,	IOMUX_CONFIG_GPIO), /* 38 */
+	IOMUX_MODE(MX31_PIN_CTS1,	IOMUX_CONFIG_GPIO), /* 39 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW4,	IOMUX_CONFIG_GPIO), /* 50 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW5,	IOMUX_CONFIG_GPIO), /* 51 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW6,	IOMUX_CONFIG_GPIO), /* 52 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW7,	IOMUX_CONFIG_GPIO), /* 53 */
+
+	/* LEDs */
+	IOMUX_MODE(MX31_PIN_DTR_DTE1,	IOMUX_CONFIG_GPIO), /* 44 */
+	IOMUX_MODE(MX31_PIN_DSR_DTE1,	IOMUX_CONFIG_GPIO), /* 45 */
+	IOMUX_MODE(MX31_PIN_KEY_COL5,	IOMUX_CONFIG_GPIO), /* 55 */
+	IOMUX_MODE(MX31_PIN_KEY_COL6,	IOMUX_CONFIG_GPIO), /* 56 */
+};
+
+/* SPI */
+static struct spi_board_info pcm037_spi_dev[] = {
+	{
+		.modalias	= "dac124s085",
+		.max_speed_hz	= 400000,
+		.bus_num	= 0,
+		.chip_select	= 0,		/* Index in pcm037_spi1_cs[] */
+		.mode		= SPI_CPHA,
+	},
+};
+
+/* Platform Data for MXC CSPI */
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
+
+struct spi_imx_master pcm037_spi1_master = {
+	.chipselect = pcm037_spi1_cs,
+	.num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
+};
+#endif
+
+/* GPIO-keys input device */
+static struct gpio_keys_button pcm037_gpio_keys[] = {
+	{
+		.type	= EV_KEY,
+		.code	= KEY_L,
+		.gpio	= 0,
+		.desc	= "Wheel Manual",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_A,
+		.gpio	= 1,
+		.desc	= "Wheel AF",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_V,
+		.gpio	= 2,
+		.desc	= "Wheel View",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_M,
+		.gpio	= 3,
+		.desc	= "Wheel Menu",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_UP,
+		.gpio	= 32,
+		.desc	= "Nav Pad Up",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_RIGHT,
+		.gpio	= 33,
+		.desc	= "Nav Pad Right",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_DOWN,
+		.gpio	= 34,
+		.desc	= "Nav Pad Down",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_LEFT,
+		.gpio	= 35,
+		.desc	= "Nav Pad Left",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_ENTER,
+		.gpio	= 38,
+		.desc	= "Nav Pad Ok",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_O,
+		.gpio	= 39,
+		.desc	= "Wheel Off",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_FORWARD,
+		.gpio	= 50,
+		.desc	= "Focus Forward",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_BACK,
+		.gpio	= 51,
+		.desc	= "Focus Backward",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_MIDDLE,
+		.gpio	= 52,
+		.desc	= "Release Half",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_EXTRA,
+		.gpio	= 53,
+		.desc	= "Release Full",
+		.wakeup	= 0,
+	},
+};
+
+static struct gpio_keys_platform_data pcm037_gpio_keys_platform_data = {
+	.buttons	= pcm037_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(pcm037_gpio_keys),
+	.rep		= 0, /* No auto-repeat */
+};
+
+static struct platform_device pcm037_gpio_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &pcm037_gpio_keys_platform_data,
+	},
+};
+
+static int eet_init_devices(void)
+{
+	if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
+		return 0;
+
+	mxc_iomux_setup_multiple_pins(pcm037_eet_pins,
+				ARRAY_SIZE(pcm037_eet_pins), "pcm037_eet");
+
+	/* SPI */
+	spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+	mxc_register_device(&mxc_spi_device0, &pcm037_spi1_master);
+#endif
+
+	platform_device_register(&pcm037_gpio_keys_device);
+
+	return 0;
+}
+
+late_initcall(eet_init_devices);

arch/arm/mach-pxa/include/mach/mfp-pxa300.h

@@ -567,9 +567,9 @@
 #define GPIO37_ULPI_DATA_OUT_7	MFP_CFG(GPIO37, AF3)
 #define GPIO33_ULPI_OTG_INTR	MFP_CFG(GPIO33, AF1)
 
-#define ULPI_DIR	MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X)
-#define ULPI_NXT	MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X)
-#define ULPI_STP	MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X)
+#define ULPI_DIR	MFP_CFG_DRV(ULPI_DIR, AF0, DS01X)
+#define ULPI_NXT	MFP_CFG_DRV(ULPI_NXT, AF0, DS01X)
+#define ULPI_STP	MFP_CFG_DRV(ULPI_STP, AF0, DS01X)
 #endif /* CONFIG_CPU_PXA310 */
 
 #endif /* __ASM_ARCH_MFP_PXA300_H */

arch/arm/mach-pxa/pxa3xx.c

@@ -250,7 +250,7 @@ static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0);
 static struct clk_lookup pxa3xx_clkregs[] = {
 	INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"),
 	/* Power I2C clock is always on */
-	INIT_CLKREG(&clk_dummy, "pxa2xx-i2c.1", NULL),
+	INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
 	INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL),
 	INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"),
 	INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"),

arch/arm/mach-realview/core.c

@@ -208,8 +208,7 @@ struct platform_device realview_i2c_device = {
 
 static struct i2c_board_info realview_i2c_board_info[] = {
 	{
-		I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1),
-		.type = "ds1338",
+		I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
 	},
 };
 

arch/arm/mach-u300/core.c

@@ -455,8 +455,8 @@ void __init u300_init_irq(void)
 	for (i = 0; i < NR_IRQS; i++)
 		set_bit(i, (unsigned long *) &mask[0]);
 	u300_enable_intcon_clock();
-	vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], 0);
-	vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], 0);
+	vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
+	vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
 }
 
 

arch/arm/mach-versatile/core.c

@@ -342,8 +342,7 @@ static struct platform_device versatile_i2c_device = {
 
 static struct i2c_board_info versatile_i2c_board_info[] = {
 	{
-		I2C_BOARD_INFO("rtc-ds1307", 0xd0 >> 1),
-		.type = "ds1338",
+		I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
 	},
 };
 

arch/arm/plat-mxc/include/mach/iomux-mx3.h

@@ -602,6 +602,8 @@ enum iomux_pins {
 #define MX31_PIN_I2C_DAT__SDA		IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_DCD_DTE1__I2C2_SDA	IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_RI_DTE1__I2C2_SCL	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_CSPI2_SS2__I2C3_SDA	IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI2_SCLK__I2C3_SCL	IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_ALT1)
 #define MX31_PIN_CSI_D4__CSI_D4		IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CSI_D5__CSI_D5		IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CSI_D6__CSI_D6		IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)

arch/arm/plat-pxa/gpio.c

@@ -16,7 +16,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/sysdev.h>
-#include <linux/bootmem.h>
+#include <linux/slab.h>
 
 #include <mach/gpio.h>
 
@@ -112,17 +112,12 @@ static int __init pxa_init_gpio_chip(int gpio_end)
 	int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1;
 	struct pxa_gpio_chip *chips;
 
-	/* this is early, we have to use bootmem allocator, and we really
-	 * want this to be allocated dynamically for different 'gpio_end'
-	 */
-	chips = alloc_bootmem_low(nbanks * sizeof(struct pxa_gpio_chip));
+	chips = kzalloc(nbanks * sizeof(struct pxa_gpio_chip), GFP_KERNEL);
 	if (chips == NULL) {
 		pr_err("%s: failed to allocate GPIO chips\n", __func__);
 		return -ENOMEM;
 	}
 
-	memset(chips, 0, nbanks * sizeof(struct pxa_gpio_chip));
-
 	for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) {
 		struct gpio_chip *c = &chips[i].chip;
 

arch/blackfin/include/asm/context.S

@@ -223,9 +223,10 @@
 	[--sp] = RETN;
 	[--sp] = RETE;
 	[--sp] = SEQSTAT;
-#ifdef CONFIG_KGDB
-	r1.l = lo(IPEND);
-	r1.h = hi(IPEND);
+#ifdef CONFIG_DEBUG_KERNEL
+	p1.l = lo(IPEND);
+	p1.h = hi(IPEND);
+	r1 = [p1];
 	[--sp] = r1;
 #else
 	[--sp] = r0;	/* Skip IPEND as well. */

arch/blackfin/include/asm/cpu.h

@@ -32,7 +32,6 @@ struct blackfin_cpudata {
 	struct task_struct *idle;
 	unsigned int imemctl;
 	unsigned int dmemctl;
-	unsigned long loops_per_jiffy;
 	unsigned long dcache_invld_count;
 	unsigned long icache_invld_count;
 };

arch/blackfin/include/asm/hardirq.h

@@ -6,6 +6,9 @@
 extern void ack_bad_irq(unsigned int irq);
 #define ack_bad_irq ack_bad_irq
 
+/* Define until common code gets sane defaults */
+#define HARDIRQ_BITS 9
+
 #include <asm-generic/hardirq.h>
 
 #endif

arch/blackfin/include/asm/processor.h

@@ -105,23 +105,16 @@ static inline uint32_t __pure bfin_revid(void)
 	/* Always use CHIPID, to work around ANOMALY_05000234 */
 	uint32_t revid = (bfin_read_CHIPID() & CHIPID_VERSION) >> 28;
 
-#ifdef CONFIG_BF52x
-	/* ANOMALY_05000357
+#ifdef _BOOTROM_GET_DXE_ADDRESS_TWI
+	/*
+	 * ANOMALY_05000364
 	 * Incorrect Revision Number in DSPID Register
 	 */
-	if (revid == 0)
-		switch (bfin_read16(_BOOTROM_GET_DXE_ADDRESS_TWI)) {
-		case 0x0010:
-			revid = 0;
-			break;
-		case 0x2796:
-			revid = 1;
-			break;
-		default:
-			revid = 0xFFFF;
-			break;
-		}
+	if (ANOMALY_05000364 &&
+	    bfin_read16(_BOOTROM_GET_DXE_ADDRESS_TWI) == 0x2796)
+		revid = 1;
 #endif
+
 	return revid;
 }
 

arch/blackfin/kernel/bfin_dma_5xx.c

@@ -253,32 +253,31 @@ void __init early_dma_memcpy(void *pdst, const void *psrc, size_t size)
 	BUG_ON(src % 4);
 	BUG_ON(size % 4);
 
-	/* Force a sync in case a previous config reset on this channel
-	 * occurred.  This is needed so subsequent writes to DMA registers
-	 * are not spuriously lost/corrupted.
-	 */
-	__builtin_bfin_ssync();
-
 	src_ch = 0;
 	/* Find an avalible memDMA channel */
 	while (1) {
-		if (!src_ch || src_ch == (struct dma_register *)MDMA_S1_NEXT_DESC_PTR) {
-			dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR;
-			src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR;
-		} else {
+		if (src_ch == (struct dma_register *)MDMA_S0_NEXT_DESC_PTR) {
 			dst_ch = (struct dma_register *)MDMA_D1_NEXT_DESC_PTR;
 			src_ch = (struct dma_register *)MDMA_S1_NEXT_DESC_PTR;
+		} else {
+			dst_ch = (struct dma_register *)MDMA_D0_NEXT_DESC_PTR;
+			src_ch = (struct dma_register *)MDMA_S0_NEXT_DESC_PTR;
 		}
 
-		if (!bfin_read16(&src_ch->cfg)) {
+		if (!bfin_read16(&src_ch->cfg))
+			break;
+		else if (bfin_read16(&dst_ch->irq_status) & DMA_DONE) {
+			bfin_write16(&src_ch->cfg, 0);
 			break;
-		} else {
-			if (bfin_read16(&src_ch->irq_status) & DMA_DONE)
-				bfin_write16(&src_ch->cfg, 0);
 		}
-
 	}
 
+	/* Force a sync in case a previous config reset on this channel
+	 * occurred.  This is needed so subsequent writes to DMA registers
+	 * are not spuriously lost/corrupted.
+	 */
+	__builtin_bfin_ssync();
+
 	/* Destination */
 	bfin_write32(&dst_ch->start_addr, dst);
 	bfin_write16(&dst_ch->x_count, size >> 2);

arch/blackfin/kernel/bfin_gpio.c

@@ -686,14 +686,12 @@ void bfin_gpio_pm_hibernate_restore(void)
 		*port_fer[bank] = gpio_bank_saved[bank].fer;
 #endif
 		gpio_array[bank]->inen  = gpio_bank_saved[bank].inen;
+		gpio_array[bank]->data_set = gpio_bank_saved[bank].data
+						& gpio_bank_saved[bank].dir;
 		gpio_array[bank]->dir   = gpio_bank_saved[bank].dir;
 		gpio_array[bank]->polar = gpio_bank_saved[bank].polar;
 		gpio_array[bank]->edge  = gpio_bank_saved[bank].edge;
 		gpio_array[bank]->both  = gpio_bank_saved[bank].both;
-
-		gpio_array[bank]->data_set = gpio_bank_saved[bank].data
-						| gpio_bank_saved[bank].dir;
-
 		gpio_array[bank]->maska = gpio_bank_saved[bank].maska;
 	}
 	AWA_DUMMY_READ(maska);

arch/blackfin/kernel/cplb-nompu/cplbinit.c

@@ -72,13 +72,24 @@ void __init generate_cplb_tables_cpu(unsigned int cpu)
 	}
 
 	/* Cover L1 memory.  One 4M area for code and data each is enough.  */
-	if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
-		d_tbl[i_d].addr = L1_DATA_A_START;
-		d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
+	if (cpu == 0) {
+		if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
+			d_tbl[i_d].addr = L1_DATA_A_START;
+			d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
+		}
+		i_tbl[i_i].addr = L1_CODE_START;
+		i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
 	}
-	i_tbl[i_i].addr = L1_CODE_START;
-	i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
-
+#ifdef CONFIG_SMP
+	else {
+		if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) {
+			d_tbl[i_d].addr = COREB_L1_DATA_A_START;
+			d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB;
+		}
+		i_tbl[i_i].addr = COREB_L1_CODE_START;
+		i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB;
+	}
+#endif
 	first_switched_dcplb = i_d;
 	first_switched_icplb = i_i;
 

arch/blackfin/kernel/process.c

@@ -361,7 +361,7 @@ static inline
 int in_mem_const(unsigned long addr, unsigned long size,
                  unsigned long const_addr, unsigned long const_size)
 {
-	return in_mem_const_off(addr, 0, size, const_addr, const_size);
+	return in_mem_const_off(addr, size, 0, const_addr, const_size);
 }
 #define IN_ASYNC(bnum, bctlnum) \
 ({ \
@@ -390,13 +390,13 @@ int bfin_mem_access_type(unsigned long addr, unsigned long size)
 	if (in_mem_const(addr, size, L1_DATA_B_START, L1_DATA_B_LENGTH))
 		return cpu == 0 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
 #ifdef COREB_L1_CODE_START
-	if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH))
+	if (in_mem_const(addr, size, COREB_L1_CODE_START, COREB_L1_CODE_LENGTH))
 		return cpu == 1 ? BFIN_MEM_ACCESS_ITEST : BFIN_MEM_ACCESS_IDMA;
 	if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
 		return cpu == 1 ? BFIN_MEM_ACCESS_CORE_ONLY : -EFAULT;
-	if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH))
+	if (in_mem_const(addr, size, COREB_L1_DATA_A_START, COREB_L1_DATA_A_LENGTH))
 		return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
-	if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH))
+	if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH))
 		return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
 #endif
 	if (in_mem_const(addr, size, L2_START, L2_LENGTH))
@@ -472,13 +472,13 @@ int _access_ok(unsigned long addr, unsigned long size)
 	if (in_mem_const_off(addr, size, _ebss_b_l1 - _sdata_b_l1, L1_DATA_B_START, L1_DATA_B_LENGTH))
 		return 1;
 #ifdef COREB_L1_CODE_START
-	if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH))
+	if (in_mem_const(addr, size, COREB_L1_CODE_START, COREB_L1_CODE_LENGTH))
 		return 1;
 	if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
 		return 1;
-	if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH))
+	if (in_mem_const(addr, size, COREB_L1_DATA_A_START, COREB_L1_DATA_A_LENGTH))
 		return 1;
-	if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH))
+	if (in_mem_const(addr, size, COREB_L1_DATA_B_START, COREB_L1_DATA_B_LENGTH))
 		return 1;
 #endif
 	if (in_mem_const_off(addr, size, _ebss_l2 - _stext_l2, L2_START, L2_LENGTH))

arch/blackfin/kernel/setup.c

@@ -168,7 +168,6 @@ void __cpuinit bfin_setup_cpudata(unsigned int cpu)
 	struct blackfin_cpudata *cpudata = &per_cpu(cpu_data, cpu);
 
 	cpudata->idle = current;
-	cpudata->loops_per_jiffy = loops_per_jiffy;
 	cpudata->imemctl = bfin_read_IMEM_CONTROL();
 	cpudata->dmemctl = bfin_read_DMEM_CONTROL();
 }
@@ -568,17 +567,23 @@ static __init void memory_setup(void)
 #  endif				/* ANOMALY_05000263 */
 # endif				/* CONFIG_ROMFS_FS */
 
-	memory_end -= mtd_size;
-
-	if (mtd_size == 0) {
-		console_init();
-		panic("Don't boot kernel without rootfs attached.");
+	/* Since the default MTD_UCLINUX has no magic number, we just blindly
+	 * read 8 past the end of the kernel's image, and look at it.
+	 * When no image is attached, mtd_size is set to a random number
+	 * Do some basic sanity checks before operating on things
+	 */
+	if (mtd_size == 0 || memory_end <= mtd_size) {
+		pr_emerg("Could not find valid ram mtd attached.\n");
+	} else {
+		memory_end -= mtd_size;
+
+		/* Relocate MTD image to the top of memory after the uncached memory area */
+		uclinux_ram_map.phys = memory_mtd_start = memory_end;
+		uclinux_ram_map.size = mtd_size;
+		pr_info("Found mtd parition at 0x%p, (len=0x%lx), moving to 0x%p\n",
+			_end, mtd_size, (void *)memory_mtd_start);
+		dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size);
 	}
-
-	/* Relocate MTD image to the top of memory after the uncached memory area */
-	uclinux_ram_map.phys = memory_mtd_start = memory_end;
-	uclinux_ram_map.size = mtd_size;
-	dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size);
 #endif				/* CONFIG_MTD_UCLINUX */
 
 #if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
@@ -868,13 +873,6 @@ void __init setup_arch(char **cmdline_p)
 	else
 		printk(KERN_CONT "and Disabled\n");
 
-#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
-	/* we need to initialize the Flashrom device here since we might
-	 * do things with flash early on in the boot
-	 */
-	flash_probe();
-#endif
-
 	printk(KERN_INFO "Boot Mode: %i\n", bfin_read_SYSCR() & 0xF);
 
 	/* Newer parts mirror SWRST bits in SYSCR */
@@ -938,10 +936,6 @@ void __init setup_arch(char **cmdline_p)
 			       CPU, bfin_revid());
 	}
 
-	/* We can't run on BF548-0.1 due to ANOMALY 05000448 */
-	if (bfin_cpuid() == 0x27de && bfin_revid() == 1)
-		panic("You can't run on this processor due to 05000448");
-
 	printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
 
 	printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
@@ -1164,9 +1158,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		sclk/1000000, sclk%1000000);
 	seq_printf(m, "bogomips\t: %lu.%02lu\n"
 		"Calibration\t: %lu loops\n",
-		(cpudata->loops_per_jiffy * HZ) / 500000,
-		((cpudata->loops_per_jiffy * HZ) / 5000) % 100,
-		(cpudata->loops_per_jiffy * HZ));
+		(loops_per_jiffy * HZ) / 500000,
+		((loops_per_jiffy * HZ) / 5000) % 100,
+		(loops_per_jiffy * HZ));
 
 	/* Check Cache configutation */
 	switch (cpudata->dmemctl & (1 << DMC0_P | 1 << DMC1_P)) {

arch/blackfin/kernel/traps.c

@@ -570,11 +570,12 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	if (kernel_mode_regs(fp) || (current && !current->mm)) {
 		console_verbose();
 		oops_in_progress = 1;
-		if (strerror)
-			verbose_printk(strerror);
 	}
 
 	if (sig != SIGTRAP) {
+		if (strerror)
+			verbose_printk(strerror);
+
 		dump_bfin_process(fp);
 		dump_bfin_mem(fp);
 		show_regs(fp);
@@ -619,7 +620,9 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		force_sig_info(sig, &info, current);
 	}
 
-	if (ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8))
+	if ((ANOMALY_05000461 && trapnr == VEC_HWERR && !access_ok(VERIFY_READ, fp->pc, 8)) ||
+	    (ANOMALY_05000281 && trapnr == VEC_HWERR) ||
+	    (ANOMALY_05000189 && (trapnr == VEC_CPLB_I_VL || trapnr == VEC_CPLB_VL)))
 		fp->pc = SAFE_USER_INSTRUCTION;
 
  traps_done:

arch/blackfin/lib/lshrdi3.c

@@ -27,21 +27,7 @@
  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-#define BITS_PER_UNIT 8
-
-typedef int SItype __attribute__ ((mode(SI)));
-typedef unsigned int USItype __attribute__ ((mode(SI)));
-typedef int DItype __attribute__ ((mode(DI)));
-typedef int word_type __attribute__ ((mode(__word__)));
-
-struct DIstruct {
-	SItype high, low;
-};
-
-typedef union {
-	struct DIstruct s;
-	DItype ll;
-} DIunion;
+#include "gcclib.h"
 
 #ifdef CONFIG_ARITHMETIC_OPS_L1
 DItype __lshrdi3(DItype u, word_type b)__attribute__((l1_text));

arch/blackfin/mach-bf518/boards/ezbrd.c

@@ -534,7 +534,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},

arch/blackfin/mach-bf518/include/mach/anomaly.h

@@ -82,6 +82,7 @@
 #define ANOMALY_05000179 (0)
 #define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
@@ -117,6 +118,7 @@
 #define ANOMALY_05000357 (0)
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000371 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (0)

arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h

@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)

arch/blackfin/mach-bf527/boards/cm_bf527.c

@@ -793,7 +793,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 		.type = "pcf8574_lcd",

arch/blackfin/mach-bf527/boards/ezbrd.c

@@ -591,7 +591,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},

arch/blackfin/mach-bf527/boards/ezkit.c

@@ -858,7 +858,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},

arch/blackfin/mach-bf527/include/mach/anomaly.h

@@ -176,6 +176,8 @@
 #define ANOMALY_05000443 (1)
 /* The WURESET Bit in the SYSCR Register is not Functional */
 #define ANOMALY_05000445 (1)
+/* USB DMA Short Packet Data Corruption */
+#define ANOMALY_05000450 (1)
 /* BCODE_QUICKBOOT, BCODE_ALLBOOT, and BCODE_FULLBOOT Settings in SYSCR Register Not Functional */
 #define ANOMALY_05000451 (1)
 /* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
@@ -201,6 +203,7 @@
 #define ANOMALY_05000179 (0)
 #define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
@@ -238,6 +241,5 @@
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000447 (0)
 #define ANOMALY_05000448 (0)
-#define ANOMALY_05000450 (0)
 
 #endif

arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h

@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)

arch/blackfin/mach-bf533/boards/stamp.c

@@ -453,7 +453,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 		.irq = 39,
 	},
 #endif
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},

arch/blackfin/mach-bf533/include/mach/anomaly.h

@@ -335,6 +335,7 @@
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000362 (1)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000389 (0)

arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h

@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)

arch/blackfin/mach-bf537/boards/stamp.c

@@ -1313,10 +1313,10 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
 	{
 		I2C_BOARD_INFO("ad7142_joystick", 0x2C),
-		.irq = IRQ_PF5,
+		.irq = IRQ_PG5,
 	},
 #endif
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},

arch/blackfin/mach-bf537/include/mach/anomaly.h

@@ -167,6 +167,7 @@
 #define ANOMALY_05000179 (0)
 #define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
@@ -186,6 +187,7 @@
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000389 (0)

arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h

@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)

arch/blackfin/mach-bf538/include/mach/anomaly.h

@@ -137,6 +137,7 @@
 #define ANOMALY_05000158 (0)
 #define ANOMALY_05000171 (0)
 #define ANOMALY_05000182 (0)
+#define ANOMALY_05000189 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
@@ -160,6 +161,7 @@
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000389 (0)

arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h

@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)

arch/blackfin/mach-bf548/boards/ezkit.c

@@ -864,7 +864,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info0[] = {
 
 #if !defined(CONFIG_BF542)	/* The BF542 only has 1 TWI */
 static struct i2c_board_info __initdata bfin_i2c_board_info1[] = {
-#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},

arch/blackfin/mach-bf548/include/mach/anomaly.h

@@ -195,6 +195,7 @@
 #define ANOMALY_05000179 (0)
 #define ANOMALY_05000182 (0)
 #define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000202 (0)
 #define ANOMALY_05000215 (0)
@@ -226,6 +227,7 @@
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000362 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000400 (0)
 #define ANOMALY_05000412 (0)

arch/blackfin/mach-bf561/include/mach/anomaly.h

@@ -288,6 +288,7 @@
 #define ANOMALY_05000273 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000364 (0)
 #define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000389 (0)

arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h

@@ -53,7 +53,7 @@
 #define UART_SET_DLAB(uart)     do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
 #define UART_CLEAR_DLAB(uart)   do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
 
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
 #define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
 #define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
 #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)

arch/blackfin/mach-bf561/include/mach/mem_map.h

@@ -37,7 +37,6 @@
 
 /* Memory Map for ADSP-BF561 processors */
 
-#ifdef CONFIG_BF561
 #define COREA_L1_CODE_START       0xFFA00000
 #define COREA_L1_DATA_A_START     0xFF800000
 #define COREA_L1_DATA_B_START     0xFF900000
@@ -74,6 +73,28 @@
 #define BFIN_DCACHESIZE	(0*1024)
 #define BFIN_DSUPBANKS	0
 #endif /*CONFIG_BFIN_DCACHE*/
+
+/*
+ * If we are in SMP mode, then the cache settings of Core B will match
+ * the settings of Core A.  If we aren't, then we assume Core B is not
+ * using any cache.  This allows the rest of the kernel to work with
+ * the core in either mode as we are only loading user code into it and
+ * it is the user's problem to make sure they aren't doing something
+ * stupid there.
+ *
+ * Note that we treat the L1 code region as a contiguous blob to make
+ * the rest of the kernel simpler.  Easier to check one region than a
+ * bunch of small ones.  Again, possible misbehavior here is the fault
+ * of the user -- don't try to use memory that doesn't exist.
+ */
+#ifdef CONFIG_SMP
+# define COREB_L1_CODE_LENGTH     L1_CODE_LENGTH
+# define COREB_L1_DATA_A_LENGTH   L1_DATA_A_LENGTH
+# define COREB_L1_DATA_B_LENGTH   L1_DATA_B_LENGTH
+#else
+# define COREB_L1_CODE_LENGTH     0x14000
+# define COREB_L1_DATA_A_LENGTH   0x8000
+# define COREB_L1_DATA_B_LENGTH   0x8000
 #endif
 
 /* Level 2 Memory */

arch/blackfin/mach-common/entry.S

@@ -218,7 +218,7 @@ ENTRY(_ex_single_step)
 	/* Single stepping only a single instruction, so clear the trace
 	 * bit here.  */
 	r7 = syscfg;
-	bitclr (r7, 0);
+	bitclr (r7, SYSCFG_SSSTEP_P);
 	syscfg = R7;
 	jump _ex_trap_c;
 
@@ -251,7 +251,7 @@ ENTRY(_ex_single_step)
 	if !cc jump _bfin_return_from_exception;
 
 	r7 = syscfg;
-	bitclr (r7, 0);
+	bitclr (r7, SYSCFG_SSSTEP_P);	/* Turn off single step */
 	syscfg = R7;
 
 	/* Fall through to _bfin_return_from_exception.  */
@@ -342,9 +342,11 @@ ENTRY(_ex_trap_c)
 	r6 = retx;
 	[p5 + PDA_RETX] = r6;
 #endif
+	/* Save the state of single stepping */
 	r6 = SYSCFG;
 	[p5 + PDA_SYSCFG] = r6;
-	BITCLR(r6, 0);
+	/* Clear it while we handle the exception in IRQ5 mode */
+	BITCLR(r6, SYSCFG_SSSTEP_P);
 	SYSCFG = r6;
 
 	/* Disable all interrupts, but make sure level 5 is enabled so
@@ -367,7 +369,7 @@ ENDPROC(_ex_trap_c)
  * exception. This is a unrecoverable event, so crash.
  * Note: this cannot be ENTRY() as we jump here with "if cc jump" ...
  */
-_double_fault:
+ENTRY(_double_fault)
 	/* Turn caches & protection off, to ensure we don't get any more
 	 * double exceptions
 	 */
@@ -872,7 +874,7 @@ ENTRY(_ret_from_exception)
 	raise 15;		/* raise evt15 to do signal or reschedule */
 4:
 	r0 = syscfg;
-	bitclr(r0, 0);
+	bitclr(r0, SYSCFG_SSSTEP_P);		/* Turn off single step */
 	syscfg = r0;
 5:
 	rts;

arch/blackfin/mach-common/smp.c

@@ -211,6 +211,8 @@ int smp_call_function(void (*func)(void *info), void *info, int wait)
 		return 0;
 
 	msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+	if (!msg)
+		return -ENOMEM;
 	INIT_LIST_HEAD(&msg->list);
 	msg->call_struct.func = func;
 	msg->call_struct.info = info;
@@ -252,6 +254,8 @@ int smp_call_function_single(int cpuid, void (*func) (void *info), void *info,
 	cpu_set(cpu, callmap);
 
 	msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+	if (!msg)
+		return -ENOMEM;
 	INIT_LIST_HEAD(&msg->list);
 	msg->call_struct.func = func;
 	msg->call_struct.info = info;
@@ -287,6 +291,8 @@ void smp_send_reschedule(int cpu)
 		return;
 
 	msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+	if (!msg)
+		return;
 	memset(msg, 0, sizeof(msg));
 	INIT_LIST_HEAD(&msg->list);
 	msg->type = BFIN_IPI_RESCHEDULE;
@@ -314,6 +320,8 @@ void smp_send_stop(void)
 		return;
 
 	msg = kmalloc(sizeof(*msg), GFP_ATOMIC);
+	if (!msg)
+		return;
 	memset(msg, 0, sizeof(msg));
 	INIT_LIST_HEAD(&msg->list);
 	msg->type = BFIN_IPI_CPU_STOP;
@@ -450,7 +458,7 @@ void __init smp_cpus_done(unsigned int max_cpus)
 	unsigned int cpu;
 
 	for_each_online_cpu(cpu)
-		bogosum += per_cpu(cpu_data, cpu).loops_per_jiffy;
+		bogosum += loops_per_jiffy;
 
 	printk(KERN_INFO "SMP: Total of %d processors activated "
 	       "(%lu.%02lu BogoMIPS).\n",

arch/sh/Makefile

@@ -193,14 +193,16 @@ endif
 libs-$(CONFIG_SUPERH32)		:= arch/sh/lib/	$(libs-y)
 libs-$(CONFIG_SUPERH64)		:= arch/sh/lib64/ $(libs-y)
 
-PHONY += maketools FORCE
+BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.srec \
+	       zImage vmlinux.srec
+PHONY += maketools $(BOOT_TARGETS) FORCE
 
 maketools:  include/linux/version.h FORCE
 	$(Q)$(MAKE) $(build)=arch/sh/tools include/asm-sh/machtypes.h
 
 all: $(KBUILD_IMAGE)
 
-zImage uImage uImage.srec vmlinux.srec: vmlinux
+$(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
 compressed: zImage
@@ -212,10 +214,13 @@ archclean:
 	$(Q)$(MAKE) $(clean)=arch/sh/kernel/vsyscall
 
 define archhelp
-	@echo '* zImage 	           - Compressed kernel image'
+	@echo '  zImage 	           - Compressed kernel image'
 	@echo '  vmlinux.srec	           - Create an ELF S-record'
-	@echo '  uImage  	           - Create a bootable image for U-Boot'
-	@echo '  uImage.srec  	           - Create an S-record for U-Boot'
+	@echo '* uImage  	           - Alias to bootable U-Boot image'
+	@echo '  uImage.srec	           - Create an S-record for U-Boot'
+	@echo '* uImage.gz	           - Kernel-only image for U-Boot (gzip)'
+	@echo '  uImage.bz2	           - Kernel-only image for U-Boot (bzip2)'
+	@echo '  uImage.lzma	           - Kernel-only image for U-Boot (lzma)'
 endef
 
 CLEAN_FILES += include/asm-sh/machtypes.h

arch/sh/boot/.gitignore

@@ -1,4 +1,3 @@
 zImage
-vmlinux.srec
-uImage
-uImage.srec
+vmlinux*
+uImage*

arch/sh/boot/Makefile

@@ -20,7 +20,12 @@ CONFIG_BOOT_LINK_OFFSET	?= 0x00800000
 CONFIG_ZERO_PAGE_OFFSET	?= 0x00001000
 CONFIG_ENTRY_OFFSET	?= 0x00001000
 
-targets := zImage vmlinux.srec uImage uImage.srec
+suffix-$(CONFIG_KERNEL_GZIP)  := gz
+suffix-$(CONFIG_KERNEL_BZIP2) := bz2
+suffix-$(CONFIG_KERNEL_LZMA)  := lzma
+
+targets := zImage vmlinux.srec uImage uImage.srec uImage.gz uImage.bz2 uImage.lzma
+extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma
 subdir- := compressed
 
 $(obj)/zImage: $(obj)/compressed/vmlinux FORCE
@@ -40,9 +45,6 @@ KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \
 		     $$[$(CONFIG_MEMORY_START)]')
 endif
 
-export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
-       CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET KERNEL_MEMORY
-
 KERNEL_LOAD	:= $(shell /bin/bash -c 'printf "0x%08x" \
 		     $$[$(CONFIG_PAGE_OFFSET)  + \
 			$(KERNEL_MEMORY) + \
@@ -55,19 +57,30 @@ KERNEL_ENTRY	:= $(shell /bin/bash -c 'printf "0x%08x" \
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \
-		   -C gzip -a $(KERNEL_LOAD) -e $(KERNEL_ENTRY) \
+		   -C $(2) -a $(KERNEL_LOAD) -e $(KERNEL_ENTRY) \
 		   -n 'Linux-$(KERNELRELEASE)' -d $< $@
 
-$(obj)/uImage: $(obj)/vmlinux.bin.gz FORCE
-	$(call if_changed,uimage)
-	@echo '  Image $@ is ready'
-
 $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
 
 $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,gzip)
 
+$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,bzip2)
+
+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,lzma)
+
+$(obj)/uImage.bz2: $(obj)/vmlinux.bin.bz2
+	$(call if_changed,uimage,bzip2)
+
+$(obj)/uImage.gz: $(obj)/vmlinux.bin.gz
+	$(call if_changed,uimage,gzip)
+
+$(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma
+	$(call if_changed,uimage,lzma)
+
 OBJCOPYFLAGS_vmlinux.srec := -I binary -O srec
 $(obj)/vmlinux.srec: $(obj)/compressed/vmlinux
 	$(call if_changed,objcopy)
@@ -76,5 +89,9 @@ OBJCOPYFLAGS_uImage.srec := -I binary -O srec
 $(obj)/uImage.srec: $(obj)/uImage
 	$(call if_changed,objcopy)
 
-clean-files	+= uImage uImage.srec vmlinux.srec \
-		   vmlinux.bin vmlinux.bin.gz
+$(obj)/uImage: $(obj)/uImage.$(suffix-y)
+	@ln -sf $(notdir $<) $@
+	@echo '  Image $@ is ready'
+
+export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
+       CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET KERNEL_MEMORY suffix-y

arch/sh/boot/compressed/Makefile

@@ -48,10 +48,6 @@ $(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE
 $(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,lzma)
 
-suffix-$(CONFIG_KERNEL_GZIP)	:= gz
-suffix-$(CONFIG_KERNEL_BZIP2)	:= bz2
-suffix-$(CONFIG_KERNEL_LZMA)	:= lzma
-
 OBJCOPYFLAGS += -R .empty_zero_page
 
 LDFLAGS_piggy.o := -r --format binary --oformat $(ld-bfd) -T

drivers/char/hvc_console.c

@@ -552,7 +552,7 @@ static int hvc_chars_in_buffer(struct tty_struct *tty)
 	struct hvc_struct *hp = tty->driver_data;
 
 	if (!hp)
-		return -1;
+		return 0;
 	return hp->n_outbuf;
 }
 

drivers/char/nozomi.c

@@ -1866,16 +1866,14 @@ static s32 ntty_chars_in_buffer(struct tty_struct *tty)
 {
 	struct port *port = tty->driver_data;
 	struct nozomi *dc = get_dc_by_tty(tty);
-	s32 rval;
+	s32 rval = 0;
 
 	if (unlikely(!dc || !port)) {
-		rval = -ENODEV;
 		goto exit_in_buffer;
 	}
 
 	if (unlikely(!port->port.count)) {
 		dev_err(&dc->pdev->dev, "No tty open?\n");
-		rval = -ENODEV;
 		goto exit_in_buffer;
 	}
 

drivers/char/pcmcia/ipwireless/tty.c

@@ -320,10 +320,10 @@ static int ipw_chars_in_buffer(struct tty_struct *linux_tty)
 	struct ipw_tty *tty = linux_tty->driver_data;
 
 	if (!tty)
-		return -ENODEV;
+		return 0;
 
 	if (!tty->open_count)
-		return -EINVAL;
+		return 0;
 
 	return tty->tx_bytes_queued;
 }

drivers/char/specialix.c

@@ -1809,10 +1809,10 @@ static int sx_tiocmset(struct tty_struct *tty, struct file *file,
 		if (clear & TIOCM_DTR)
 			port->MSVR &= ~MSVR_DTR;
 	}
-	spin_lock_irqsave(&bp->lock, flags);
+	spin_lock(&bp->lock);
 	sx_out(bp, CD186x_CAR, port_No(port));
 	sx_out(bp, CD186x_MSVR, port->MSVR);
-	spin_unlock_irqrestore(&bp->lock, flags);
+	spin_unlock(&bp->lock);
 	spin_unlock_irqrestore(&port->lock, flags);
 	func_exit();
 	return 0;
@@ -1833,11 +1833,11 @@ static int sx_send_break(struct tty_struct *tty, int length)
 	port->break_length = SPECIALIX_TPS / HZ * length;
 	port->COR2 |= COR2_ETC;
 	port->IER  |= IER_TXRDY;
-	spin_lock_irqsave(&bp->lock, flags);
+	spin_lock(&bp->lock);
 	sx_out(bp, CD186x_CAR, port_No(port));
 	sx_out(bp, CD186x_COR2, port->COR2);
 	sx_out(bp, CD186x_IER, port->IER);
-	spin_unlock_irqrestore(&bp->lock, flags);
+	spin_unlock(&bp->lock);
 	spin_unlock_irqrestore(&port->lock, flags);
 	sx_wait_CCR(bp);
 	spin_lock_irqsave(&bp->lock, flags);
@@ -2023,9 +2023,9 @@ static void sx_unthrottle(struct tty_struct *tty)
 	if (sx_crtscts(tty))
 		port->MSVR |= MSVR_DTR;
 	/* Else clause: see remark in "sx_throttle"... */
-	spin_lock_irqsave(&bp->lock, flags);
+	spin_lock(&bp->lock);
 	sx_out(bp, CD186x_CAR, port_No(port));
-	spin_unlock_irqrestore(&bp->lock, flags);
+	spin_unlock(&bp->lock);
 	if (I_IXOFF(tty)) {
 		spin_unlock_irqrestore(&port->lock, flags);
 		sx_wait_CCR(bp);
@@ -2035,9 +2035,9 @@ static void sx_unthrottle(struct tty_struct *tty)
 		sx_wait_CCR(bp);
 		spin_lock_irqsave(&port->lock, flags);
 	}
-	spin_lock_irqsave(&bp->lock, flags);
+	spin_lock(&bp->lock);
 	sx_out(bp, CD186x_MSVR, port->MSVR);
-	spin_unlock_irqrestore(&bp->lock, flags);
+	spin_unlock(&bp->lock);
 	spin_unlock_irqrestore(&port->lock, flags);
 
 	func_exit();
@@ -2061,10 +2061,10 @@ static void sx_stop(struct tty_struct *tty)
 
 	spin_lock_irqsave(&port->lock, flags);
 	port->IER &= ~IER_TXRDY;
-	spin_lock_irqsave(&bp->lock, flags);
+	spin_lock(&bp->lock);
 	sx_out(bp, CD186x_CAR, port_No(port));
 	sx_out(bp, CD186x_IER, port->IER);
-	spin_unlock_irqrestore(&bp->lock, flags);
+	spin_unlock(&bp->lock);
 	spin_unlock_irqrestore(&port->lock, flags);
 
 	func_exit();
@@ -2089,10 +2089,10 @@ static void sx_start(struct tty_struct *tty)
 	spin_lock_irqsave(&port->lock, flags);
 	if (port->xmit_cnt && port->xmit_buf && !(port->IER & IER_TXRDY)) {
 		port->IER |= IER_TXRDY;
-		spin_lock_irqsave(&bp->lock, flags);
+		spin_lock(&bp->lock);
 		sx_out(bp, CD186x_CAR, port_No(port));
 		sx_out(bp, CD186x_IER, port->IER);
-		spin_unlock_irqrestore(&bp->lock, flags);
+		spin_unlock(&bp->lock);
 	}
 	spin_unlock_irqrestore(&port->lock, flags);
 

drivers/char/vc_screen.c

@@ -495,11 +495,15 @@ void vcs_remove_sysfs(int index)
 
 int __init vcs_init(void)
 {
+	unsigned int i;
+
 	if (register_chrdev(VCS_MAJOR, "vcs", &vcs_fops))
 		panic("unable to get major %d for vcs device", VCS_MAJOR);
 	vc_class = class_create(THIS_MODULE, "vc");
 
 	device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 0), NULL, "vcs");
 	device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 128), NULL, "vcsa");
+	for (i = 0; i < MIN_NR_CONSOLES; i++)
+		vcs_make_sysfs(i);
 	return 0;
 }

drivers/isdn/gigaset/interface.c

@@ -408,6 +408,8 @@ static int if_write_room(struct tty_struct *tty)
 	return retval;
 }
 
+/* FIXME: This function does not have error returns */
+
 static int if_chars_in_buffer(struct tty_struct *tty)
 {
 	struct cardstate *cs;

drivers/mmc/host/mvsdio.c

@@ -384,7 +384,7 @@ static irqreturn_t mvsd_irq(int irq, void *dev)
 				u16 val[2] = {0, 0};
 				val[0] = mvsd_read(MVSD_FIFO);
 				val[1] = mvsd_read(MVSD_FIFO);
-				memcpy(p, &val, s);
+				memcpy(p, ((void *)&val) + 4 - s, s);
 				s = 0;
 				intr_status = mvsd_read(MVSD_NOR_INTR_STATUS);
 			}
@@ -423,7 +423,7 @@ static irqreturn_t mvsd_irq(int irq, void *dev)
 		if (s < 4) {
 			if (s && (intr_status & MVSD_NOR_TX_AVAIL)) {
 				u16 val[2] = {0, 0};
-				memcpy(&val, p, s);
+				memcpy(((void *)&val) + 4 - s, p, s);
 				mvsd_write(MVSD_FIFO, val[0]);
 				mvsd_write(MVSD_FIFO, val[1]);
 				s = 0;

drivers/mmc/host/pxamci.c

@@ -168,12 +168,12 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
 
 	if (data->flags & MMC_DATA_READ) {
 		host->dma_dir = DMA_FROM_DEVICE;
-		dcmd = DCMD_INCTRGADDR | DCMD_FLOWTRG;
+		dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC;
 		DRCMR(host->dma_drcmrtx) = 0;
 		DRCMR(host->dma_drcmrrx) = host->dma | DRCMR_MAPVLD;
 	} else {
 		host->dma_dir = DMA_TO_DEVICE;
-		dcmd = DCMD_INCSRCADDR | DCMD_FLOWSRC;
+		dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG;
 		DRCMR(host->dma_drcmrrx) = 0;
 		DRCMR(host->dma_drcmrtx) = host->dma | DRCMR_MAPVLD;
 	}

drivers/usb/class/cdc-acm.c

@@ -750,7 +750,7 @@ static int acm_tty_chars_in_buffer(struct tty_struct *tty)
 {
 	struct acm *acm = tty->driver_data;
 	if (!ACM_READY(acm))
-		return -EINVAL;
+		return 0;
 	/*
 	 * This is inaccurate (overcounts), but it works.
 	 */

drivers/usb/serial/mos7720.c

@@ -521,7 +521,7 @@ static int mos7720_chars_in_buffer(struct tty_struct *tty)
 	mos7720_port = usb_get_serial_port_data(port);
 	if (mos7720_port == NULL) {
 		dbg("%s:leaving ...........", __func__);
-		return -ENODEV;
+		return 0;
 	}
 
 	for (i = 0; i < NUM_URBS; ++i) {

drivers/usb/serial/ti_usb_3410_5052.c

@@ -727,7 +727,7 @@ static int ti_write_room(struct tty_struct *tty)
 	dbg("%s - port %d", __func__, port->number);
 
 	if (tport == NULL)
-		return -ENODEV;
+		return 0;
 
 	spin_lock_irqsave(&tport->tp_lock, flags);
 	room = ti_buf_space_avail(tport->tp_write_buf);
@@ -748,7 +748,7 @@ static int ti_chars_in_buffer(struct tty_struct *tty)
 	dbg("%s - port %d", __func__, port->number);
 
 	if (tport == NULL)
-		return -ENODEV;
+		return 0;
 
 	spin_lock_irqsave(&tport->tp_lock, flags);
 	chars = ti_buf_data_avail(tport->tp_write_buf);

drivers/video/backlight/pwm_bl.c

@@ -145,6 +145,8 @@ static int pwm_backlight_suspend(struct platform_device *pdev,
 	struct backlight_device *bl = platform_get_drvdata(pdev);
 	struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev);
 
+	if (pb->notify)
+		pb->notify(0);
 	pwm_config(pb->pwm, 0, pb->period);
 	pwm_disable(pb->pwm);
 	return 0;

drivers/watchdog/ep93xx_wdt.c

@@ -29,6 +29,7 @@
 #include <linux/watchdog.h>
 #include <linux/timer.h>
 #include <linux/uaccess.h>
+#include <linux/io.h>
 #include <mach/hardware.h>
 
 #define WDT_VERSION	"0.3"

fs/9p/vfs_addr.c

@@ -57,7 +57,7 @@ static int v9fs_vfs_readpage(struct file *filp, struct page *page)
 	buffer = kmap(page);
 	offset = page_offset(page);
 
-	retval = v9fs_file_readn(filp, buffer, NULL, offset, PAGE_CACHE_SIZE);
+	retval = v9fs_file_readn(filp, buffer, NULL, PAGE_CACHE_SIZE, offset);
 	if (retval < 0)
 		goto done;
 

fs/cifs/cifs_debug.c

@@ -261,6 +261,8 @@ static ssize_t cifs_stats_proc_write(struct file *file,
 					atomic_set(&tcon->num_reads, 0);
 					atomic_set(&tcon->num_oplock_brks, 0);
 					atomic_set(&tcon->num_opens, 0);
+					atomic_set(&tcon->num_posixopens, 0);
+					atomic_set(&tcon->num_posixmkdirs, 0);
 					atomic_set(&tcon->num_closes, 0);
 					atomic_set(&tcon->num_deletes, 0);
 					atomic_set(&tcon->num_mkdirs, 0);
@@ -347,11 +349,15 @@ static int cifs_stats_proc_show(struct seq_file *m, void *v)
 					atomic_read(&tcon->num_locks),
 					atomic_read(&tcon->num_hardlinks),
 					atomic_read(&tcon->num_symlinks));
-				seq_printf(m, "\nOpens: %d Closes: %d"
+				seq_printf(m, "\nOpens: %d Closes: %d "
 					      "Deletes: %d",
 					atomic_read(&tcon->num_opens),
 					atomic_read(&tcon->num_closes),
 					atomic_read(&tcon->num_deletes));
+				seq_printf(m, "\nPosix Opens: %d "
+					      "Posix Mkdirs: %d",
+					atomic_read(&tcon->num_posixopens),
+					atomic_read(&tcon->num_posixmkdirs));
 				seq_printf(m, "\nMkdirs: %d Rmdirs: %d",
 					atomic_read(&tcon->num_mkdirs),
 					atomic_read(&tcon->num_rmdirs));

fs/cifs/cifsglob.h

@@ -260,6 +260,8 @@ struct cifsTconInfo {
 	atomic_t num_closes;
 	atomic_t num_deletes;
 	atomic_t num_mkdirs;
+	atomic_t num_posixopens;
+	atomic_t num_posixmkdirs;
 	atomic_t num_rmdirs;
 	atomic_t num_renames;
 	atomic_t num_t2renames;

fs/cifs/cifssmb.c

@@ -1113,7 +1113,10 @@ PsxCreat:
 psx_create_err:
 	cifs_buf_release(pSMB);
 
-	cifs_stats_inc(&tcon->num_mkdirs);
+	if (posix_flags & SMB_O_DIRECTORY)
+		cifs_stats_inc(&tcon->num_posixmkdirs);
+	else
+		cifs_stats_inc(&tcon->num_posixopens);
 
 	if (rc == -EAGAIN)
 		goto PsxCreat;

fs/cifs/connect.c

@@ -2726,6 +2726,7 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses,
 		strncpy(tcon->treeName, tree, MAX_TREE_SIZE);
 
 		/* mostly informational -- no need to fail on error here */
+		kfree(tcon->nativeFileSystem);
 		tcon->nativeFileSystem = cifs_strndup_from_ucs(bcc_ptr,
 						      bytes_left, is_unicode,
 						      nls_codepage);

net/9p/client.c

@@ -117,9 +117,6 @@ static int parse_opts(char *opts, struct p9_client *clnt)
 		}
 	}
 
-	if (!clnt->trans_mod)
-		clnt->trans_mod = v9fs_get_default_trans();
-
 	kfree(options);
 	return ret;
 }
@@ -689,6 +686,9 @@ struct p9_client *p9_client_create(const char *dev_name, char *options)
 	if (err < 0)
 		goto error;
 
+	if (!clnt->trans_mod)
+		clnt->trans_mod = v9fs_get_default_trans();
+
 	if (clnt->trans_mod == NULL) {
 		err = -EPROTONOSUPPORT;
 		P9_DPRINTK(P9_DEBUG_ERROR,
@@ -1098,7 +1098,6 @@ p9_client_read(struct p9_fid *fid, char *data, char __user *udata, u64 offset,
 
 	if (data) {
 		memmove(data, dataptr, count);
-		data += count;
 	}
 
 	if (udata) {
@@ -1192,9 +1191,9 @@ struct p9_wstat *p9_client_stat(struct p9_fid *fid)
 
 	err = p9pdu_readf(req->rc, clnt->dotu, "wS", &ignored, ret);
 	if (err) {
-		ret = ERR_PTR(err);
 		p9pdu_dump(1, req->rc);
-		goto free_and_error;
+		p9_free_req(clnt, req);
+		goto error;
 	}
 
 	P9_DPRINTK(P9_DEBUG_9P,
@@ -1211,8 +1210,6 @@ struct p9_wstat *p9_client_stat(struct p9_fid *fid)
 	p9_free_req(clnt, req);
 	return ret;
 
-free_and_error:
-	p9_free_req(clnt, req);
 error:
 	kfree(ret);
 	return ERR_PTR(err);