Browse Source

avr32: clean up mci platform code

This patch does a few small cleanups around the atmel mci platform code
and in the atmel-mci driver.  The platform changes simply removes an
unused variable, uses the fact that by the end we always have some form
of platform data and notes that GPIO_PIN_NONE != 0.  This last point
could cause the incorrect attempt to twice reserve pin PA0.

While we've got the hood up, add linux/err.h to the atmel-mci.c include
list.  It needs it and generally pulls it by voodoo but I did once
stumble across a config which don't build.

This is against Linus' latest git.

Signed-off-by: Ben Nizette <bn@niasdigital.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Ben Nizette 17 năm trước cách đây
mục cha
commit
fbfca4b878
2 tập tin đã thay đổi với 7 bổ sung7 xóa
  1. 6 7
      arch/avr32/mach-at32ap/at32ap700x.c
  2. 1 0
      drivers/mmc/host/atmel-mci.c

+ 6 - 7
arch/avr32/mach-at32ap/at32ap700x.c

@@ -1284,7 +1284,6 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 {
 	struct mci_platform_data	_data;
 	struct platform_device		*pdev;
-	struct dw_dma_slave		*dws;
 
 	if (id != 0)
 		return NULL;
@@ -1300,6 +1299,8 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 	if (!data) {
 		data = &_data;
 		memset(data, 0, sizeof(struct mci_platform_data));
+		data->detect_pin = GPIO_PIN_NONE;
+		data->wp_pin = GPIO_PIN_NONE;
 	}
 
 	if (platform_device_add_data(pdev, data,
@@ -1313,12 +1314,10 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 	select_peripheral(PA(14), PERIPH_A, 0);	/* DATA2 */
 	select_peripheral(PA(15), PERIPH_A, 0);	/* DATA3 */
 
-	if (data) {
-		if (data->detect_pin != GPIO_PIN_NONE)
-			at32_select_gpio(data->detect_pin, 0);
-		if (data->wp_pin != GPIO_PIN_NONE)
-			at32_select_gpio(data->wp_pin, 0);
-	}
+	if (data->detect_pin != GPIO_PIN_NONE)
+		at32_select_gpio(data->detect_pin, 0);
+	if (data->wp_pin != GPIO_PIN_NONE)
+		at32_select_gpio(data->wp_pin, 0);
 
 	atmel_mci0_pclk.dev = &pdev->dev;
 

+ 1 - 0
drivers/mmc/host/atmel-mci.c

@@ -10,6 +10,7 @@
 #include <linux/blkdev.h>
 #include <linux/clk.h>
 #include <linux/device.h>
+#include <linux/err.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>