Merge branches 'acerhdf', 'acpi-pci-bind', 'bjorn-pci-root', 'bugzilla-12904', 'bugzilla-13121', 'bugzilla-13396', 'bugzilla-13533', 'bugzilla-13612', 'c3_lock', 'hid-cleanups', 'misc-2.6.31', 'pdc-leak-fix', 'pnpacpi', 'power_nocheck', 'thinkpad_acpi', 'video' and 'wmi' into release

Documentation/kernel-parameters.txt

@@ -229,14 +229,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			to assume that this machine's pmtimer latches its value
 			and always returns good values.
 
- 	acpi.power_nocheck=	[HW,ACPI]
- 			Format: 1/0 enable/disable the check of power state.
- 			On some bogus BIOS the _PSC object/_STA object of
- 			power resource can't return the correct device power
- 			state. In such case it is unneccessary to check its
- 			power state again in power transition.
- 			1 : disable the power state check
-
 	acpi_sci=	[HW,ACPI] ACPI System Control Interrupt trigger mode
 			Format: { level | edge | high | low }
 

Documentation/laptops/thinkpad-acpi.txt

@@ -920,7 +920,7 @@ The available commands are:
 	echo '<LED number> off' >/proc/acpi/ibm/led
 	echo '<LED number> blink' >/proc/acpi/ibm/led
 
-The <LED number> range is 0 to 7. The set of LEDs that can be
+The <LED number> range is 0 to 15. The set of LEDs that can be
 controlled varies from model to model. Here is the common ThinkPad
 mapping:
 
@@ -932,6 +932,11 @@ mapping:
 	5 - UltraBase battery slot
 	6 - (unknown)
 	7 - standby
+	8 - dock status 1
+	9 - dock status 2
+	10, 11 - (unknown)
+	12 - thinkvantage
+	13, 14, 15 - (unknown)
 
 All of the above can be turned on and off and can be made to blink.
 
@@ -940,10 +945,12 @@ sysfs notes:
 The ThinkPad LED sysfs interface is described in detail by the LED class
 documentation, in Documentation/leds-class.txt.
 
-The leds are named (in LED ID order, from 0 to 7):
+The LEDs are named (in LED ID order, from 0 to 12):
 "tpacpi::power", "tpacpi:orange:batt", "tpacpi:green:batt",
 "tpacpi::dock_active", "tpacpi::bay_active", "tpacpi::dock_batt",
-"tpacpi::unknown_led", "tpacpi::standby".
+"tpacpi::unknown_led", "tpacpi::standby", "tpacpi::dock_status1",
+"tpacpi::dock_status2", "tpacpi::unknown_led2", "tpacpi::unknown_led3",
+"tpacpi::thinkvantage".
 
 Due to limitations in the sysfs LED class, if the status of the LED
 indicators cannot be read due to an error, thinkpad-acpi will report it as
@@ -958,6 +965,12 @@ ThinkPad indicator LED should blink in hardware accelerated mode, use the
 "timer" trigger, and leave the delay_on and delay_off parameters set to
 zero (to request hardware acceleration autodetection).
 
+LEDs that are known not to exist in a given ThinkPad model are not
+made available through the sysfs interface.  If you have a dock and you
+notice there are LEDs listed for your ThinkPad that do not exist (and
+are not in the dock), or if you notice that there are missing LEDs,
+a report to ibm-acpi-devel@lists.sourceforge.net is appreciated.
+
 
 ACPI sounds -- /proc/acpi/ibm/beep
 ----------------------------------
@@ -1156,17 +1169,19 @@ may not be distinct.  Later Lenovo models that implement the ACPI
 display backlight brightness control methods have 16 levels, ranging
 from 0 to 15.
 
-There are two interfaces to the firmware for direct brightness control,
-EC and UCMS (or CMOS).  To select which one should be used, use the
-brightness_mode module parameter: brightness_mode=1 selects EC mode,
-brightness_mode=2 selects UCMS mode, brightness_mode=3 selects EC
-mode with NVRAM backing (so that brightness changes are remembered
-across shutdown/reboot).
+For IBM ThinkPads, there are two interfaces to the firmware for direct
+brightness control, EC and UCMS (or CMOS).  To select which one should be
+used, use the brightness_mode module parameter: brightness_mode=1 selects
+EC mode, brightness_mode=2 selects UCMS mode, brightness_mode=3 selects EC
+mode with NVRAM backing (so that brightness changes are remembered across
+shutdown/reboot).
 
 The driver tries to select which interface to use from a table of
 defaults for each ThinkPad model.  If it makes a wrong choice, please
 report this as a bug, so that we can fix it.
 
+Lenovo ThinkPads only support brightness_mode=2 (UCMS).
+
 When display backlight brightness controls are available through the
 standard ACPI interface, it is best to use it instead of this direct
 ThinkPad-specific interface.  The driver will disable its native
@@ -1254,7 +1269,7 @@ Fan control and monitoring: fan speed, fan enable/disable
 
 procfs: /proc/acpi/ibm/fan
 sysfs device attributes: (hwmon "thinkpad") fan1_input, pwm1,
-			  pwm1_enable
+			  pwm1_enable, fan2_input
 sysfs hwmon driver attributes: fan_watchdog
 
 NOTE NOTE NOTE: fan control operations are disabled by default for
@@ -1267,6 +1282,9 @@ from the hardware registers of the embedded controller.  This is known
 to work on later R, T, X and Z series ThinkPads but may show a bogus
 value on other models.
 
+Some Lenovo ThinkPads support a secondary fan.  This fan cannot be
+controlled separately, it shares the main fan control.
+
 Fan levels:
 
 Most ThinkPad fans work in "levels" at the firmware interface.  Level 0
@@ -1397,6 +1415,11 @@ hwmon device attribute fan1_input:
 	which can take up to two minutes.  May return rubbish on older
 	ThinkPads.
 
+hwmon device attribute fan2_input:
+	Fan tachometer reading, in RPM, for the secondary fan.
+	Available only on some ThinkPads.  If the secondary fan is
+	not installed, will always read 0.
+
 hwmon driver attribute fan_watchdog:
 	Fan safety watchdog timer interval, in seconds.  Minimum is
 	1 second, maximum is 120 seconds.  0 disables the watchdog.
@@ -1555,3 +1578,7 @@ Sysfs interface changelog:
 0x020300:	hotkey enable/disable support removed, attributes
 		hotkey_bios_enabled and hotkey_enable deprecated and
 		marked for removal.
+
+0x020400:	Marker for 16 LEDs support.  Also, LEDs that are known
+		to not exist in a given model are not registered with
+		the LED sysfs class anymore.

MAINTAINERS

@@ -230,6 +230,13 @@ L:	linux-acenic@sunsite.dk
 S:	Maintained
 F:	drivers/net/acenic*
 
+ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER
+P: Peter Feuerer
+M: peter@piie.net
+W: http://piie.net/?section=acerhdf
+S: Maintained
+F: drivers/platform/x86/acerhdf.c
+
 ACER WMI LAPTOP EXTRAS
 P:	Carlos Corbacho
 M:	carlos@strangeworlds.co.uk

arch/ia64/kernel/acpi-processor.c

@@ -71,3 +71,15 @@ void arch_acpi_processor_init_pdc(struct acpi_processor *pr)
 }
 
 EXPORT_SYMBOL(arch_acpi_processor_init_pdc);
+
+void arch_acpi_processor_cleanup_pdc(struct acpi_processor *pr)
+{
+	if (pr->pdc) {
+		kfree(pr->pdc->pointer->buffer.pointer);
+		kfree(pr->pdc->pointer);
+		kfree(pr->pdc);
+		pr->pdc = NULL;
+	}
+}
+
+EXPORT_SYMBOL(arch_acpi_processor_cleanup_pdc);

arch/x86/include/asm/acpi.h

@@ -144,6 +144,7 @@ static inline unsigned int acpi_processor_cstate_check(unsigned int max_cstate)
 
 #else /* !CONFIG_ACPI */
 
+#define acpi_disabled 1
 #define acpi_lapic 0
 #define acpi_ioapic 0
 static inline void acpi_noirq_set(void) { }

arch/x86/include/asm/pci_x86.h

@@ -121,6 +121,9 @@ extern int __init pcibios_init(void);
 extern int __init pci_mmcfg_arch_init(void);
 extern void __init pci_mmcfg_arch_free(void);
 
+extern struct acpi_mcfg_allocation *pci_mmcfg_config;
+extern int pci_mmcfg_config_num;
+
 /*
  * AMD Fam10h CPUs are buggy, and cannot access MMIO config space
  * on their northbrige except through the * %eax register. As such, you MUST

arch/x86/kernel/acpi/boot.c

@@ -44,11 +44,7 @@
 
 static int __initdata acpi_force = 0;
 u32 acpi_rsdt_forced;
-#ifdef	CONFIG_ACPI
-int acpi_disabled = 0;
-#else
-int acpi_disabled = 1;
-#endif
+int acpi_disabled;
 EXPORT_SYMBOL(acpi_disabled);
 
 #ifdef	CONFIG_X86_64
@@ -122,72 +118,6 @@ void __init __acpi_unmap_table(char *map, unsigned long size)
 	early_iounmap(map, size);
 }
 
-#ifdef CONFIG_PCI_MMCONFIG
-
-static int acpi_mcfg_64bit_base_addr __initdata = FALSE;
-
-/* The physical address of the MMCONFIG aperture.  Set from ACPI tables. */
-struct acpi_mcfg_allocation *pci_mmcfg_config;
-int pci_mmcfg_config_num;
-
-static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg)
-{
-	if (!strcmp(mcfg->header.oem_id, "SGI"))
-		acpi_mcfg_64bit_base_addr = TRUE;
-
-	return 0;
-}
-
-int __init acpi_parse_mcfg(struct acpi_table_header *header)
-{
-	struct acpi_table_mcfg *mcfg;
-	unsigned long i;
-	int config_size;
-
-	if (!header)
-		return -EINVAL;
-
-	mcfg = (struct acpi_table_mcfg *)header;
-
-	/* how many config structures do we have */
-	pci_mmcfg_config_num = 0;
-	i = header->length - sizeof(struct acpi_table_mcfg);
-	while (i >= sizeof(struct acpi_mcfg_allocation)) {
-		++pci_mmcfg_config_num;
-		i -= sizeof(struct acpi_mcfg_allocation);
-	};
-	if (pci_mmcfg_config_num == 0) {
-		printk(KERN_ERR PREFIX "MMCONFIG has no entries\n");
-		return -ENODEV;
-	}
-
-	config_size = pci_mmcfg_config_num * sizeof(*pci_mmcfg_config);
-	pci_mmcfg_config = kmalloc(config_size, GFP_KERNEL);
-	if (!pci_mmcfg_config) {
-		printk(KERN_WARNING PREFIX
-		       "No memory for MCFG config tables\n");
-		return -ENOMEM;
-	}
-
-	memcpy(pci_mmcfg_config, &mcfg[1], config_size);
-
-	acpi_mcfg_oem_check(mcfg);
-
-	for (i = 0; i < pci_mmcfg_config_num; ++i) {
-		if ((pci_mmcfg_config[i].address > 0xFFFFFFFF) &&
-		    !acpi_mcfg_64bit_base_addr) {
-			printk(KERN_ERR PREFIX
-			       "MMCONFIG not in low 4GB of memory\n");
-			kfree(pci_mmcfg_config);
-			pci_mmcfg_config_num = 0;
-			return -ENODEV;
-		}
-	}
-
-	return 0;
-}
-#endif				/* CONFIG_PCI_MMCONFIG */
-
 #ifdef CONFIG_X86_LOCAL_APIC
 static int __init acpi_parse_madt(struct acpi_table_header *table)
 {
@@ -1517,14 +1447,6 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = {
 		     DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"),
 		     },
 	 },
-	{
-	 .callback = force_acpi_ht,
-	 .ident = "ASUS P4B266",
-	 .matches = {
-		     DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
-		     DMI_MATCH(DMI_BOARD_NAME, "P4B266"),
-		     },
-	 },
 	{
 	 .callback = force_acpi_ht,
 	 .ident = "ASUS P2B-DS",

arch/x86/kernel/acpi/cstate.c

@@ -34,12 +34,22 @@ void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags,
 		flags->bm_check = 1;
 	else if (c->x86_vendor == X86_VENDOR_INTEL) {
 		/*
-		 * Today all CPUs that support C3 share cache.
-		 * TBD: This needs to look at cache shared map, once
-		 * multi-core detection patch makes to the base.
+		 * Today all MP CPUs that support C3 share cache.
+		 * And caches should not be flushed by software while
+		 * entering C3 type state.
 		 */
 		flags->bm_check = 1;
 	}
+
+	/*
+	 * On all recent Intel platforms, ARB_DISABLE is a nop.
+	 * So, set bm_control to zero to indicate that ARB_DISABLE
+	 * is not required while entering C3 type state on
+	 * P4, Core and beyond CPUs
+	 */
+	if (c->x86_vendor == X86_VENDOR_INTEL &&
+	    (c->x86 > 0x6 || (c->x86 == 6 && c->x86_model >= 14)))
+			flags->bm_control = 0;
 }
 EXPORT_SYMBOL(acpi_processor_power_init_bm_check);
 

arch/x86/kernel/acpi/processor.c

@@ -72,6 +72,7 @@ static void init_intel_pdc(struct acpi_processor *pr, struct cpuinfo_x86 *c)
 	return;
 }
 
+
 /* Initialize _PDC data based on the CPU vendor */
 void arch_acpi_processor_init_pdc(struct acpi_processor *pr)
 {
@@ -85,3 +86,15 @@ void arch_acpi_processor_init_pdc(struct acpi_processor *pr)
 }
 
 EXPORT_SYMBOL(arch_acpi_processor_init_pdc);
+
+void arch_acpi_processor_cleanup_pdc(struct acpi_processor *pr)
+{
+	if (pr->pdc) {
+		kfree(pr->pdc->pointer->buffer.pointer);
+		kfree(pr->pdc->pointer);
+		kfree(pr->pdc);
+		pr->pdc = NULL;
+	}
+}
+
+EXPORT_SYMBOL(arch_acpi_processor_cleanup_pdc);

arch/x86/pci/mmconfig-shared.c

@@ -523,6 +523,69 @@ reject:
 
 static int __initdata known_bridge;
 
+static int acpi_mcfg_64bit_base_addr __initdata = FALSE;
+
+/* The physical address of the MMCONFIG aperture.  Set from ACPI tables. */
+struct acpi_mcfg_allocation *pci_mmcfg_config;
+int pci_mmcfg_config_num;
+
+static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg)
+{
+	if (!strcmp(mcfg->header.oem_id, "SGI"))
+		acpi_mcfg_64bit_base_addr = TRUE;
+
+	return 0;
+}
+
+static int __init pci_parse_mcfg(struct acpi_table_header *header)
+{
+	struct acpi_table_mcfg *mcfg;
+	unsigned long i;
+	int config_size;
+
+	if (!header)
+		return -EINVAL;
+
+	mcfg = (struct acpi_table_mcfg *)header;
+
+	/* how many config structures do we have */
+	pci_mmcfg_config_num = 0;
+	i = header->length - sizeof(struct acpi_table_mcfg);
+	while (i >= sizeof(struct acpi_mcfg_allocation)) {
+		++pci_mmcfg_config_num;
+		i -= sizeof(struct acpi_mcfg_allocation);
+	};
+	if (pci_mmcfg_config_num == 0) {
+		printk(KERN_ERR PREFIX "MMCONFIG has no entries\n");
+		return -ENODEV;
+	}
+
+	config_size = pci_mmcfg_config_num * sizeof(*pci_mmcfg_config);
+	pci_mmcfg_config = kmalloc(config_size, GFP_KERNEL);
+	if (!pci_mmcfg_config) {
+		printk(KERN_WARNING PREFIX
+		       "No memory for MCFG config tables\n");
+		return -ENOMEM;
+	}
+
+	memcpy(pci_mmcfg_config, &mcfg[1], config_size);
+
+	acpi_mcfg_oem_check(mcfg);
+
+	for (i = 0; i < pci_mmcfg_config_num; ++i) {
+		if ((pci_mmcfg_config[i].address > 0xFFFFFFFF) &&
+		    !acpi_mcfg_64bit_base_addr) {
+			printk(KERN_ERR PREFIX
+			       "MMCONFIG not in low 4GB of memory\n");
+			kfree(pci_mmcfg_config);
+			pci_mmcfg_config_num = 0;
+			return -ENODEV;
+		}
+	}
+
+	return 0;
+}
+
 static void __init __pci_mmcfg_init(int early)
 {
 	/* MMCONFIG disabled */
@@ -543,7 +606,7 @@ static void __init __pci_mmcfg_init(int early)
 	}
 
 	if (!known_bridge)
-		acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
+		acpi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg);
 
 	pci_mmcfg_reject_broken(early);
 

drivers/acpi/blacklist.c

@@ -192,6 +192,22 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
 		     DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
 		},
 	},
+	{
+	.callback = dmi_disable_osi_vista,
+	.ident = "Sony VGN-NS10J_S",
+	.matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NS10J_S"),
+		},
+	},
+	{
+	.callback = dmi_disable_osi_vista,
+	.ident = "Sony VGN-SR290J",
+	.matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "Sony VGN-SR290J"),
+		},
+	},
 
 	/*
 	 * BIOS invocation of _OSI(Linux) is almost always a BIOS bug.

drivers/acpi/glue.c

@@ -140,46 +140,6 @@ struct device *acpi_get_physical_device(acpi_handle handle)
 
 EXPORT_SYMBOL(acpi_get_physical_device);
 
-/* ToDo: When a PCI bridge is found, return the PCI device behind the bridge
- *       This should work in general, but did not on a Lenovo T61 for the
- *	 graphics card. But this must be fixed when the PCI device is
- *       bound and the kernel device struct is attached to the acpi device
- * Note: A success call will increase reference count by one
- *       Do call put_device(dev) on the returned device then
- */
-struct device *acpi_get_physical_pci_device(acpi_handle handle)
-{
-	struct device *dev;
-	long long device_id;
-	acpi_status status;
-
-	status =
-		acpi_evaluate_integer(handle, "_ADR", NULL, &device_id);
-
-	if (ACPI_FAILURE(status))
-		return NULL;
-
-	/* We need to attempt to determine whether the _ADR refers to a
-	   PCI device or not. There's no terribly good way to do this,
-	   so the best we can hope for is to assume that there'll never
-	   be a device in the host bridge */
-	if (device_id >= 0x10000) {
-		/* It looks like a PCI device. Does it exist? */
-		dev = acpi_get_physical_device(handle);
-	} else {
-		/* It doesn't look like a PCI device. Does its parent
-		   exist? */
-		acpi_handle phandle;
-		if (acpi_get_parent(handle, &phandle))
-			return NULL;
-		dev = acpi_get_physical_device(phandle);
-	}
-	if (!dev)
-		return NULL;
-	return dev;
-}
-EXPORT_SYMBOL(acpi_get_physical_pci_device);
-
 static int acpi_bind_one(struct device *dev, acpi_handle handle)
 {
 	struct acpi_device *acpi_dev;

drivers/acpi/osl.c

@@ -79,6 +79,7 @@ static acpi_osd_handler acpi_irq_handler;
 static void *acpi_irq_context;
 static struct workqueue_struct *kacpid_wq;
 static struct workqueue_struct *kacpi_notify_wq;
+static struct workqueue_struct *kacpi_hotplug_wq;
 
 struct acpi_res_list {
 	resource_size_t start;
@@ -192,8 +193,10 @@ acpi_status acpi_os_initialize1(void)
 {
 	kacpid_wq = create_singlethread_workqueue("kacpid");
 	kacpi_notify_wq = create_singlethread_workqueue("kacpi_notify");
+	kacpi_hotplug_wq = create_singlethread_workqueue("kacpi_hotplug");
 	BUG_ON(!kacpid_wq);
 	BUG_ON(!kacpi_notify_wq);
+	BUG_ON(!kacpi_hotplug_wq);
 	return AE_OK;
 }
 
@@ -206,6 +209,7 @@ acpi_status acpi_os_terminate(void)
 
 	destroy_workqueue(kacpid_wq);
 	destroy_workqueue(kacpi_notify_wq);
+	destroy_workqueue(kacpi_hotplug_wq);
 
 	return AE_OK;
 }
@@ -716,6 +720,7 @@ static acpi_status __acpi_os_execute(acpi_execute_type type,
 	acpi_status status = AE_OK;
 	struct acpi_os_dpc *dpc;
 	struct workqueue_struct *queue;
+	work_func_t func;
 	int ret;
 	ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 			  "Scheduling function [%p(%p)] for deferred execution.\n",
@@ -740,15 +745,17 @@ static acpi_status __acpi_os_execute(acpi_execute_type type,
 	dpc->function = function;
 	dpc->context = context;
 
-	if (!hp) {
-		INIT_WORK(&dpc->work, acpi_os_execute_deferred);
-		queue = (type == OSL_NOTIFY_HANDLER) ?
-			kacpi_notify_wq : kacpid_wq;
-		ret = queue_work(queue, &dpc->work);
-	} else {
-		INIT_WORK(&dpc->work, acpi_os_execute_hp_deferred);
-		ret = schedule_work(&dpc->work);
-	}
+	/*
+	 * We can't run hotplug code in keventd_wq/kacpid_wq/kacpid_notify_wq
+	 * because the hotplug code may call driver .remove() functions,
+	 * which invoke flush_scheduled_work/acpi_os_wait_events_complete
+	 * to flush these workqueues.
+	 */
+	queue = hp ? kacpi_hotplug_wq :
+		(type == OSL_NOTIFY_HANDLER ? kacpi_notify_wq : kacpid_wq);
+	func = hp ? acpi_os_execute_hp_deferred : acpi_os_execute_deferred;
+	INIT_WORK(&dpc->work, func);
+	ret = queue_work(queue, &dpc->work);
 
 	if (!ret) {
 		printk(KERN_ERR PREFIX

drivers/acpi/pci_bind.c

@@ -24,12 +24,7 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
 #include <linux/types.h>
-#include <linux/proc_fs.h>
-#include <linux/spinlock.h>
-#include <linux/pm.h>
 #include <linux/pci.h>
 #include <linux/acpi.h>
 #include <acpi/acpi_bus.h>
@@ -38,310 +33,76 @@
 #define _COMPONENT		ACPI_PCI_COMPONENT
 ACPI_MODULE_NAME("pci_bind");
 
-struct acpi_pci_data {
-	struct acpi_pci_id id;
-	struct pci_bus *bus;
-	struct pci_dev *dev;
-};
-
-static int acpi_pci_unbind(struct acpi_device *device);
-
-static void acpi_pci_data_handler(acpi_handle handle, u32 function,
-				  void *context)
-{
-
-	/* TBD: Anything we need to do here? */
-
-	return;
-}
-
-/**
- * acpi_get_pci_id
- * ------------------
- * This function is used by the ACPI Interpreter (a.k.a. Core Subsystem)
- * to resolve PCI information for ACPI-PCI devices defined in the namespace.
- * This typically occurs when resolving PCI operation region information.
- */
-acpi_status acpi_get_pci_id(acpi_handle handle, struct acpi_pci_id *id)
+static int acpi_pci_unbind(struct acpi_device *device)
 {
-	int result = 0;
-	acpi_status status = AE_OK;
-	struct acpi_device *device = NULL;
-	struct acpi_pci_data *data = NULL;
-
-
-	if (!id)
-		return AE_BAD_PARAMETER;
-
-	result = acpi_bus_get_device(handle, &device);
-	if (result) {
-		printk(KERN_ERR PREFIX
-			    "Invalid ACPI Bus context for device %s\n",
-			    acpi_device_bid(device));
-		return AE_NOT_EXIST;
-	}
-
-	status = acpi_get_data(handle, acpi_pci_data_handler, (void **)&data);
-	if (ACPI_FAILURE(status) || !data) {
-		ACPI_EXCEPTION((AE_INFO, status,
-				"Invalid ACPI-PCI context for device %s",
-				acpi_device_bid(device)));
-		return status;
-	}
+	struct pci_dev *dev;
 
-	*id = data->id;
+	dev = acpi_get_pci_dev(device->handle);
+	if (!dev || !dev->subordinate)
+		goto out;
 
-	/*
-	   id->segment = data->id.segment;
-	   id->bus = data->id.bus;
-	   id->device = data->id.device;
-	   id->function = data->id.function;
-	 */
+	acpi_pci_irq_del_prt(dev->subordinate);
 
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-			  "Device %s has PCI address %04x:%02x:%02x.%d\n",
-			  acpi_device_bid(device), id->segment, id->bus,
-			  id->device, id->function));
+	device->ops.bind = NULL;
+	device->ops.unbind = NULL;
 
-	return AE_OK;
+out:
+	pci_dev_put(dev);
+	return 0;
 }
 
-EXPORT_SYMBOL(acpi_get_pci_id);
-
-int acpi_pci_bind(struct acpi_device *device)
+static int acpi_pci_bind(struct acpi_device *device)
 {
-	int result = 0;
 	acpi_status status;
-	struct acpi_pci_data *data;
-	struct acpi_pci_data *pdata;
-	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 	acpi_handle handle;
+	struct pci_bus *bus;
+	struct pci_dev *dev;
 
-	if (!device || !device->parent)
-		return -EINVAL;
-
-	data = kzalloc(sizeof(struct acpi_pci_data), GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	status = acpi_get_name(device->handle, ACPI_FULL_PATHNAME, &buffer);
-	if (ACPI_FAILURE(status)) {
-		kfree(data);
-		return -ENODEV;
-	}
-
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Binding PCI device [%s]...\n",
-			  (char *)buffer.pointer));
-
-	/* 
-	 * Segment & Bus
-	 * -------------
-	 * These are obtained via the parent device's ACPI-PCI context.
-	 */
-	status = acpi_get_data(device->parent->handle, acpi_pci_data_handler,
-			       (void **)&pdata);
-	if (ACPI_FAILURE(status) || !pdata || !pdata->bus) {
-		ACPI_EXCEPTION((AE_INFO, status,
-				"Invalid ACPI-PCI context for parent device %s",
-				acpi_device_bid(device->parent)));
-		result = -ENODEV;
-		goto end;
-	}
-	data->id.segment = pdata->id.segment;
-	data->id.bus = pdata->bus->number;
-
-	/*
-	 * Device & Function
-	 * -----------------
-	 * These are simply obtained from the device's _ADR method.  Note
-	 * that a value of zero is valid.
-	 */
-	data->id.device = device->pnp.bus_address >> 16;
-	data->id.function = device->pnp.bus_address & 0xFFFF;
-
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "...to %04x:%02x:%02x.%d\n",
-			  data->id.segment, data->id.bus, data->id.device,
-			  data->id.function));
-
-	/*
-	 * TBD: Support slot devices (e.g. function=0xFFFF).
-	 */
-
-	/* 
-	 * Locate PCI Device
-	 * -----------------
-	 * Locate matching device in PCI namespace.  If it doesn't exist
-	 * this typically means that the device isn't currently inserted
-	 * (e.g. docking station, port replicator, etc.).
-	 */
-	data->dev = pci_get_slot(pdata->bus,
-				PCI_DEVFN(data->id.device, data->id.function));
-	if (!data->dev) {
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Device %04x:%02x:%02x.%d not present in PCI namespace\n",
-				  data->id.segment, data->id.bus,
-				  data->id.device, data->id.function));
-		result = -ENODEV;
-		goto end;
-	}
-	if (!data->dev->bus) {
-		printk(KERN_ERR PREFIX
-			    "Device %04x:%02x:%02x.%d has invalid 'bus' field\n",
-			    data->id.segment, data->id.bus,
-			    data->id.device, data->id.function);
-		result = -ENODEV;
-		goto end;
-	}
+	dev = acpi_get_pci_dev(device->handle);
+	if (!dev)
+		return 0;
 
 	/*
-	 * PCI Bridge?
-	 * -----------
-	 * If so, set the 'bus' field and install the 'bind' function to 
-	 * facilitate callbacks for all of its children.
+	 * Install the 'bind' function to facilitate callbacks for
+	 * children of the P2P bridge.
 	 */
-	if (data->dev->subordinate) {
+	if (dev->subordinate) {
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 				  "Device %04x:%02x:%02x.%d is a PCI bridge\n",
-				  data->id.segment, data->id.bus,
-				  data->id.device, data->id.function));
-		data->bus = data->dev->subordinate;
+				  pci_domain_nr(dev->bus), dev->bus->number,
+				  PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)));
 		device->ops.bind = acpi_pci_bind;
 		device->ops.unbind = acpi_pci_unbind;
 	}
 
 	/*
-	 * Attach ACPI-PCI Context
-	 * -----------------------
-	 * Thus binding the ACPI and PCI devices.
-	 */
-	status = acpi_attach_data(device->handle, acpi_pci_data_handler, data);
-	if (ACPI_FAILURE(status)) {
-		ACPI_EXCEPTION((AE_INFO, status,
-				"Unable to attach ACPI-PCI context to device %s",
-				acpi_device_bid(device)));
-		result = -ENODEV;
-		goto end;
-	}
-
-	/*
-	 * PCI Routing Table
-	 * -----------------
-	 * Evaluate and parse _PRT, if exists.  This code is independent of 
-	 * PCI bridges (above) to allow parsing of _PRT objects within the
-	 * scope of non-bridge devices.  Note that _PRTs within the scope of
-	 * a PCI bridge assume the bridge's subordinate bus number.
+	 * Evaluate and parse _PRT, if exists.  This code allows parsing of
+	 * _PRT objects within the scope of non-bridge devices.  Note that
+	 * _PRTs within the scope of a PCI bridge assume the bridge's
+	 * subordinate bus number.
 	 *
 	 * TBD: Can _PRTs exist within the scope of non-bridge PCI devices?
 	 */
 	status = acpi_get_handle(device->handle, METHOD_NAME__PRT, &handle);
-	if (ACPI_SUCCESS(status)) {
-		if (data->bus)	/* PCI-PCI bridge */
-			acpi_pci_irq_add_prt(device->handle, data->id.segment,
-					     data->bus->number);
-		else		/* non-bridge PCI device */
-			acpi_pci_irq_add_prt(device->handle, data->id.segment,
-					     data->id.bus);
-	}
-
-      end:
-	kfree(buffer.pointer);
-	if (result) {
-		pci_dev_put(data->dev);
-		kfree(data);
-	}
-	return result;
-}
-
-static int acpi_pci_unbind(struct acpi_device *device)
-{
-	int result = 0;
-	acpi_status status;
-	struct acpi_pci_data *data;
-	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
-
-
-	if (!device || !device->parent)
-		return -EINVAL;
-
-	status = acpi_get_name(device->handle, ACPI_FULL_PATHNAME, &buffer);
 	if (ACPI_FAILURE(status))
-		return -ENODEV;
+		goto out;
 
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Unbinding PCI device [%s]...\n",
-			  (char *) buffer.pointer));
-	kfree(buffer.pointer);
+	if (dev->subordinate)
+		bus = dev->subordinate;
+	else
+		bus = dev->bus;
 
-	status =
-	    acpi_get_data(device->handle, acpi_pci_data_handler,
-			  (void **)&data);
-	if (ACPI_FAILURE(status)) {
-		result = -ENODEV;
-		goto end;
-	}
+	acpi_pci_irq_add_prt(device->handle, bus);
 
-	status = acpi_detach_data(device->handle, acpi_pci_data_handler);
-	if (ACPI_FAILURE(status)) {
-		ACPI_EXCEPTION((AE_INFO, status,
-				"Unable to detach data from device %s",
-				acpi_device_bid(device)));
-		result = -ENODEV;
-		goto end;
-	}
-	if (data->dev->subordinate) {
-		acpi_pci_irq_del_prt(data->id.segment, data->bus->number);
-	}
-	pci_dev_put(data->dev);
-	kfree(data);
-
-      end:
-	return result;
+out:
+	pci_dev_put(dev);
+	return 0;
 }
 
-int
-acpi_pci_bind_root(struct acpi_device *device,
-		   struct acpi_pci_id *id, struct pci_bus *bus)
+int acpi_pci_bind_root(struct acpi_device *device)
 {
-	int result = 0;
-	acpi_status status;
-	struct acpi_pci_data *data = NULL;
-	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
-
-	if (!device || !id || !bus) {
-		return -EINVAL;
-	}
-
-	data = kzalloc(sizeof(struct acpi_pci_data), GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	data->id = *id;
-	data->bus = bus;
 	device->ops.bind = acpi_pci_bind;
 	device->ops.unbind = acpi_pci_unbind;
 
-	status = acpi_get_name(device->handle, ACPI_FULL_PATHNAME, &buffer);
-	if (ACPI_FAILURE(status)) {
-		kfree (data);
-		return -ENODEV;
-	}
-
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Binding PCI root bridge [%s] to "
-			"%04x:%02x\n", (char *)buffer.pointer,
-			id->segment, id->bus));
-
-	status = acpi_attach_data(device->handle, acpi_pci_data_handler, data);
-	if (ACPI_FAILURE(status)) {
-		ACPI_EXCEPTION((AE_INFO, status,
-				"Unable to attach ACPI-PCI context to device %s",
-				(char *)buffer.pointer));
-		result = -ENODEV;
-		goto end;
-	}
-
-      end:
-	kfree(buffer.pointer);
-	if (result != 0)
-		kfree(data);
-
-	return result;
+	return 0;
 }

drivers/acpi/pci_irq.c

@@ -182,7 +182,7 @@ static void do_prt_fixups(struct acpi_prt_entry *entry,
 	}
 }
 
-static int acpi_pci_irq_add_entry(acpi_handle handle, int segment, int bus,
+static int acpi_pci_irq_add_entry(acpi_handle handle, struct pci_bus *bus,
 				  struct acpi_pci_routing_table *prt)
 {
 	struct acpi_prt_entry *entry;
@@ -196,8 +196,8 @@ static int acpi_pci_irq_add_entry(acpi_handle handle, int segment, int bus,
 	 * 1=INTA, 2=INTB.  We use the PCI encoding throughout, so convert
 	 * it here.
 	 */
-	entry->id.segment = segment;
-	entry->id.bus = bus;
+	entry->id.segment = pci_domain_nr(bus);
+	entry->id.bus = bus->number;
 	entry->id.device = (prt->address >> 16) & 0xFFFF;
 	entry->pin = prt->pin + 1;
 
@@ -242,7 +242,7 @@ static int acpi_pci_irq_add_entry(acpi_handle handle, int segment, int bus,
 	return 0;
 }
 
-int acpi_pci_irq_add_prt(acpi_handle handle, int segment, int bus)
+int acpi_pci_irq_add_prt(acpi_handle handle, struct pci_bus *bus)
 {
 	acpi_status status;
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
@@ -271,7 +271,7 @@ int acpi_pci_irq_add_prt(acpi_handle handle, int segment, int bus)
 
 	entry = buffer.pointer;
 	while (entry && (entry->length > 0)) {
-		acpi_pci_irq_add_entry(handle, segment, bus, entry);
+		acpi_pci_irq_add_entry(handle, bus, entry);
 		entry = (struct acpi_pci_routing_table *)
 		    ((unsigned long)entry + entry->length);
 	}
@@ -280,16 +280,17 @@ int acpi_pci_irq_add_prt(acpi_handle handle, int segment, int bus)
 	return 0;
 }
 
-void acpi_pci_irq_del_prt(int segment, int bus)
+void acpi_pci_irq_del_prt(struct pci_bus *bus)
 {
 	struct acpi_prt_entry *entry, *tmp;
 
 	printk(KERN_DEBUG
 	       "ACPI: Delete PCI Interrupt Routing Table for %04x:%02x\n",
-	       segment, bus);
+	       pci_domain_nr(bus), bus->number);
 	spin_lock(&acpi_prt_lock);
 	list_for_each_entry_safe(entry, tmp, &acpi_prt_list, list) {
-		if (segment == entry->id.segment && bus == entry->id.bus) {
+		if (pci_domain_nr(bus) == entry->id.segment
+			&& bus->number == entry->id.bus) {
 			list_del(&entry->list);
 			kfree(entry);
 		}

drivers/acpi/pci_root.c

@@ -63,9 +63,10 @@ static struct acpi_driver acpi_pci_root_driver = {
 
 struct acpi_pci_root {
 	struct list_head node;
-	struct acpi_device * device;
-	struct acpi_pci_id id;
+	struct acpi_device *device;
 	struct pci_bus *bus;
+	u16 segment;
+	u8 bus_nr;
 
 	u32 osc_support_set;	/* _OSC state of support bits */
 	u32 osc_control_set;	/* _OSC state of control bits */
@@ -82,7 +83,7 @@ static DEFINE_MUTEX(osc_lock);
 int acpi_pci_register_driver(struct acpi_pci_driver *driver)
 {
 	int n = 0;
-	struct list_head *entry;
+	struct acpi_pci_root *root;
 
 	struct acpi_pci_driver **pptr = &sub_driver;
 	while (*pptr)
@@ -92,9 +93,7 @@ int acpi_pci_register_driver(struct acpi_pci_driver *driver)
 	if (!driver->add)
 		return 0;
 
-	list_for_each(entry, &acpi_pci_roots) {
-		struct acpi_pci_root *root;
-		root = list_entry(entry, struct acpi_pci_root, node);
+	list_for_each_entry(root, &acpi_pci_roots, node) {
 		driver->add(root->device->handle);
 		n++;
 	}
@@ -106,7 +105,7 @@ EXPORT_SYMBOL(acpi_pci_register_driver);
 
 void acpi_pci_unregister_driver(struct acpi_pci_driver *driver)
 {
-	struct list_head *entry;
+	struct acpi_pci_root *root;
 
 	struct acpi_pci_driver **pptr = &sub_driver;
 	while (*pptr) {
@@ -120,28 +119,48 @@ void acpi_pci_unregister_driver(struct acpi_pci_driver *driver)
 	if (!driver->remove)
 		return;
 
-	list_for_each(entry, &acpi_pci_roots) {
-		struct acpi_pci_root *root;
-		root = list_entry(entry, struct acpi_pci_root, node);
+	list_for_each_entry(root, &acpi_pci_roots, node)
 		driver->remove(root->device->handle);
-	}
 }
 
 EXPORT_SYMBOL(acpi_pci_unregister_driver);
 
 acpi_handle acpi_get_pci_rootbridge_handle(unsigned int seg, unsigned int bus)
 {
-	struct acpi_pci_root *tmp;
+	struct acpi_pci_root *root;
 	
-	list_for_each_entry(tmp, &acpi_pci_roots, node) {
-		if ((tmp->id.segment == (u16) seg) && (tmp->id.bus == (u16) bus))
-			return tmp->device->handle;
-	}
+	list_for_each_entry(root, &acpi_pci_roots, node)
+		if ((root->segment == (u16) seg) && (root->bus_nr == (u16) bus))
+			return root->device->handle;
 	return NULL;		
 }
 
 EXPORT_SYMBOL_GPL(acpi_get_pci_rootbridge_handle);
 
+/**
+ * acpi_is_root_bridge - determine whether an ACPI CA node is a PCI root bridge
+ * @handle - the ACPI CA node in question.
+ *
+ * Note: we could make this API take a struct acpi_device * instead, but
+ * for now, it's more convenient to operate on an acpi_handle.
+ */
+int acpi_is_root_bridge(acpi_handle handle)
+{
+	int ret;
+	struct acpi_device *device;
+
+	ret = acpi_bus_get_device(handle, &device);
+	if (ret)
+		return 0;
+
+	ret = acpi_match_device_ids(device, root_device_ids);
+	if (ret)
+		return 0;
+	else
+		return 1;
+}
+EXPORT_SYMBOL_GPL(acpi_is_root_bridge);
+
 static acpi_status
 get_root_bridge_busnr_callback(struct acpi_resource *resource, void *data)
 {
@@ -161,19 +180,22 @@ get_root_bridge_busnr_callback(struct acpi_resource *resource, void *data)
 	return AE_OK;
 }
 
-static acpi_status try_get_root_bridge_busnr(acpi_handle handle, int *busnum)
+static acpi_status try_get_root_bridge_busnr(acpi_handle handle,
+					     unsigned long long *bus)
 {
 	acpi_status status;
+	int busnum;
 
-	*busnum = -1;
+	busnum = -1;
 	status =
 	    acpi_walk_resources(handle, METHOD_NAME__CRS,
-				get_root_bridge_busnr_callback, busnum);
+				get_root_bridge_busnr_callback, &busnum);
 	if (ACPI_FAILURE(status))
 		return status;
 	/* Check if we really get a bus number from _CRS */
-	if (*busnum == -1)
+	if (busnum == -1)
 		return AE_ERROR;
+	*bus = busnum;
 	return AE_OK;
 }
 
@@ -298,6 +320,7 @@ static acpi_status acpi_pci_osc_support(struct acpi_pci_root *root, u32 flags)
 static struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle)
 {
 	struct acpi_pci_root *root;
+
 	list_for_each_entry(root, &acpi_pci_roots, node) {
 		if (root->device->handle == handle)
 			return root;
@@ -305,6 +328,87 @@ static struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle)
 	return NULL;
 }
 
+struct acpi_handle_node {
+	struct list_head node;
+	acpi_handle handle;
+};
+
+/**
+ * acpi_get_pci_dev - convert ACPI CA handle to struct pci_dev
+ * @handle: the handle in question
+ *
+ * Given an ACPI CA handle, the desired PCI device is located in the
+ * list of PCI devices.
+ *
+ * If the device is found, its reference count is increased and this
+ * function returns a pointer to its data structure.  The caller must
+ * decrement the reference count by calling pci_dev_put().
+ * If no device is found, %NULL is returned.
+ */
+struct pci_dev *acpi_get_pci_dev(acpi_handle handle)
+{
+	int dev, fn;
+	unsigned long long adr;
+	acpi_status status;
+	acpi_handle phandle;
+	struct pci_bus *pbus;
+	struct pci_dev *pdev = NULL;
+	struct acpi_handle_node *node, *tmp;
+	struct acpi_pci_root *root;
+	LIST_HEAD(device_list);
+
+	/*
+	 * Walk up the ACPI CA namespace until we reach a PCI root bridge.
+	 */
+	phandle = handle;
+	while (!acpi_is_root_bridge(phandle)) {
+		node = kzalloc(sizeof(struct acpi_handle_node), GFP_KERNEL);
+		if (!node)
+			goto out;
+
+		INIT_LIST_HEAD(&node->node);
+		node->handle = phandle;
+		list_add(&node->node, &device_list);
+
+		status = acpi_get_parent(phandle, &phandle);
+		if (ACPI_FAILURE(status))
+			goto out;
+	}
+
+	root = acpi_pci_find_root(phandle);
+	if (!root)
+		goto out;
+
+	pbus = root->bus;
+
+	/*
+	 * Now, walk back down the PCI device tree until we return to our
+	 * original handle. Assumes that everything between the PCI root
+	 * bridge and the device we're looking for must be a P2P bridge.
+	 */
+	list_for_each_entry(node, &device_list, node) {
+		acpi_handle hnd = node->handle;
+		status = acpi_evaluate_integer(hnd, "_ADR", NULL, &adr);
+		if (ACPI_FAILURE(status))
+			goto out;
+		dev = (adr >> 16) & 0xffff;
+		fn  = adr & 0xffff;
+
+		pdev = pci_get_slot(pbus, PCI_DEVFN(dev, fn));
+		if (hnd == handle)
+			break;
+
+		pbus = pdev->subordinate;
+		pci_dev_put(pdev);
+	}
+out:
+	list_for_each_entry_safe(node, tmp, &device_list, node)
+		kfree(node);
+
+	return pdev;
+}
+EXPORT_SYMBOL_GPL(acpi_get_pci_dev);
+
 /**
  * acpi_pci_osc_control_set - commit requested control to Firmware
  * @handle: acpi_handle for the target ACPI object
@@ -363,31 +467,46 @@ EXPORT_SYMBOL(acpi_pci_osc_control_set);
 
 static int __devinit acpi_pci_root_add(struct acpi_device *device)
 {
-	int result = 0;
-	struct acpi_pci_root *root = NULL;
-	struct acpi_pci_root *tmp;
-	acpi_status status = AE_OK;
-	unsigned long long value = 0;
-	acpi_handle handle = NULL;
+	unsigned long long segment, bus;
+	acpi_status status;
+	int result;
+	struct acpi_pci_root *root;
+	acpi_handle handle;
 	struct acpi_device *child;
 	u32 flags, base_flags;
 
+	segment = 0;
+	status = acpi_evaluate_integer(device->handle, METHOD_NAME__SEG, NULL,
+				       &segment);
+	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+		printk(KERN_ERR PREFIX "can't evaluate _SEG\n");
+		return -ENODEV;
+	}
 
-	if (!device)
-		return -EINVAL;
+	/* Check _CRS first, then _BBN.  If no _BBN, default to zero. */
+	bus = 0;
+	status = try_get_root_bridge_busnr(device->handle, &bus);
+	if (ACPI_FAILURE(status)) {
+		status = acpi_evaluate_integer(device->handle, METHOD_NAME__BBN,					       NULL, &bus);
+		if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+			printk(KERN_ERR PREFIX
+			     "no bus number in _CRS and can't evaluate _BBN\n");
+			return -ENODEV;
+		}
+	}
 
 	root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL);
 	if (!root)
 		return -ENOMEM;
-	INIT_LIST_HEAD(&root->node);
 
+	INIT_LIST_HEAD(&root->node);
 	root->device = device;
+	root->segment = segment & 0xFFFF;
+	root->bus_nr = bus & 0xFF;
 	strcpy(acpi_device_name(device), ACPI_PCI_ROOT_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ACPI_PCI_ROOT_CLASS);
 	device->driver_data = root;
 
-	device->ops.bind = acpi_pci_bind;
-
 	/*
 	 * All supported architectures that use ACPI have support for
 	 * PCI domains, so we indicate this in _OSC support capabilities.
@@ -395,79 +514,6 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device)
 	flags = base_flags = OSC_PCI_SEGMENT_GROUPS_SUPPORT;
 	acpi_pci_osc_support(root, flags);
 
-	/* 
-	 * Segment
-	 * -------
-	 * Obtained via _SEG, if exists, otherwise assumed to be zero (0).
-	 */
-	status = acpi_evaluate_integer(device->handle, METHOD_NAME__SEG, NULL,
-				       &value);
-	switch (status) {
-	case AE_OK:
-		root->id.segment = (u16) value;
-		break;
-	case AE_NOT_FOUND:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Assuming segment 0 (no _SEG)\n"));
-		root->id.segment = 0;
-		break;
-	default:
-		ACPI_EXCEPTION((AE_INFO, status, "Evaluating _SEG"));
-		result = -ENODEV;
-		goto end;
-	}
-
-	/* 
-	 * Bus
-	 * ---
-	 * Obtained via _BBN, if exists, otherwise assumed to be zero (0).
-	 */
-	status = acpi_evaluate_integer(device->handle, METHOD_NAME__BBN, NULL,
-				       &value);
-	switch (status) {
-	case AE_OK:
-		root->id.bus = (u16) value;
-		break;
-	case AE_NOT_FOUND:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Assuming bus 0 (no _BBN)\n"));
-		root->id.bus = 0;
-		break;
-	default:
-		ACPI_EXCEPTION((AE_INFO, status, "Evaluating _BBN"));
-		result = -ENODEV;
-		goto end;
-	}
-
-	/* Some systems have wrong _BBN */
-	list_for_each_entry(tmp, &acpi_pci_roots, node) {
-		if ((tmp->id.segment == root->id.segment)
-		    && (tmp->id.bus == root->id.bus)) {
-			int bus = 0;
-			acpi_status status;
-
-			printk(KERN_ERR PREFIX
-				    "Wrong _BBN value, reboot"
-				    " and use option 'pci=noacpi'\n");
-
-			status = try_get_root_bridge_busnr(device->handle, &bus);
-			if (ACPI_FAILURE(status))
-				break;
-			if (bus != root->id.bus) {
-				printk(KERN_INFO PREFIX
-				       "PCI _CRS %d overrides _BBN 0\n", bus);
-				root->id.bus = bus;
-			}
-			break;
-		}
-	}
-	/*
-	 * Device & Function
-	 * -----------------
-	 * Obtained from _ADR (which has already been evaluated for us).
-	 */
-	root->id.device = device->pnp.bus_address >> 16;
-	root->id.function = device->pnp.bus_address & 0xFFFF;
-
 	/*
 	 * TBD: Need PCI interface for enumeration/configuration of roots.
 	 */
@@ -477,7 +523,7 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device)
 
 	printk(KERN_INFO PREFIX "%s [%s] (%04x:%02x)\n",
 	       acpi_device_name(device), acpi_device_bid(device),
-	       root->id.segment, root->id.bus);
+	       root->segment, root->bus_nr);
 
 	/*
 	 * Scan the Root Bridge
@@ -486,11 +532,11 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device)
 	 * PCI namespace does not get created until this call is made (and 
 	 * thus the root bridge's pci_dev does not exist).
 	 */
-	root->bus = pci_acpi_scan_root(device, root->id.segment, root->id.bus);
+	root->bus = pci_acpi_scan_root(device, segment, bus);
 	if (!root->bus) {
 		printk(KERN_ERR PREFIX
 			    "Bus %04x:%02x not present in PCI namespace\n",
-			    root->id.segment, root->id.bus);
+			    root->segment, root->bus_nr);
 		result = -ENODEV;
 		goto end;
 	}
@@ -500,7 +546,7 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device)
 	 * -----------------------
 	 * Thus binding the ACPI and PCI devices.
 	 */
-	result = acpi_pci_bind_root(device, &root->id, root->bus);
+	result = acpi_pci_bind_root(device);
 	if (result)
 		goto end;
 
@@ -511,8 +557,7 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device)
 	 */
 	status = acpi_get_handle(device->handle, METHOD_NAME__PRT, &handle);
 	if (ACPI_SUCCESS(status))
-		result = acpi_pci_irq_add_prt(device->handle, root->id.segment,
-					      root->id.bus);
+		result = acpi_pci_irq_add_prt(device->handle, root->bus);
 
 	/*
 	 * Scan and bind all _ADR-Based Devices
@@ -531,42 +576,28 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device)
 	if (flags != base_flags)
 		acpi_pci_osc_support(root, flags);
 
-      end:
-	if (result) {
-		if (!list_empty(&root->node))
-			list_del(&root->node);
-		kfree(root);
-	}
+	return 0;
 
+end:
+	if (!list_empty(&root->node))
+		list_del(&root->node);
+	kfree(root);
 	return result;
 }
 
 static int acpi_pci_root_start(struct acpi_device *device)
 {
-	struct acpi_pci_root *root;
+	struct acpi_pci_root *root = acpi_driver_data(device);
 
-
-	list_for_each_entry(root, &acpi_pci_roots, node) {
-		if (root->device == device) {
-			pci_bus_add_devices(root->bus);
-			return 0;
-		}
-	}
-	return -ENODEV;
+	pci_bus_add_devices(root->bus);
+	return 0;
 }
 
 static int acpi_pci_root_remove(struct acpi_device *device, int type)
 {
-	struct acpi_pci_root *root = NULL;
-
-
-	if (!device || !acpi_driver_data(device))
-		return -EINVAL;
-
-	root = acpi_driver_data(device);
+	struct acpi_pci_root *root = acpi_driver_data(device);
 
 	kfree(root);
-
 	return 0;
 }
 

drivers/acpi/power.c

@@ -194,7 +194,7 @@ static int acpi_power_get_list_state(struct acpi_handle_list *list, int *state)
 
 static int acpi_power_on(acpi_handle handle, struct acpi_device *dev)
 {
-	int result = 0, state;
+	int result = 0;
 	int found = 0;
 	acpi_status status = AE_OK;
 	struct acpi_power_resource *resource = NULL;
@@ -236,18 +236,6 @@ static int acpi_power_on(acpi_handle handle, struct acpi_device *dev)
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
 
-	if (!acpi_power_nocheck) {
-		/*
-		 * If acpi_power_nocheck is set, it is unnecessary to check
-		 * the power state after power transition.
-		 */
-		result = acpi_power_get_state(resource->device->handle,
-				&state);
-		if (result)
-			return result;
-		if (state != ACPI_POWER_RESOURCE_STATE_ON)
-			return -ENOEXEC;
-	}
 	/* Update the power resource's _device_ power state */
 	resource->device->power.state = ACPI_STATE_D0;
 
@@ -258,7 +246,7 @@ static int acpi_power_on(acpi_handle handle, struct acpi_device *dev)
 
 static int acpi_power_off_device(acpi_handle handle, struct acpi_device *dev)
 {
-	int result = 0, state;
+	int result = 0;
 	acpi_status status = AE_OK;
 	struct acpi_power_resource *resource = NULL;
 	struct list_head *node, *next;
@@ -293,18 +281,6 @@ static int acpi_power_off_device(acpi_handle handle, struct acpi_device *dev)
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
 
-	if (!acpi_power_nocheck) {
-		/*
-		 * If acpi_power_nocheck is set, it is unnecessary to check
-		 * the power state after power transition.
-		 */
-		result = acpi_power_get_state(handle, &state);
-		if (result)
-			return result;
-		if (state != ACPI_POWER_RESOURCE_STATE_OFF)
-			return -ENOEXEC;
-	}
-
 	/* Update the power resource's _device_ power state */
 	resource->device->power.state = ACPI_STATE_D3;
 

drivers/acpi/processor_core.c

@@ -89,7 +89,7 @@ static int acpi_processor_handle_eject(struct acpi_processor *pr);
 
 static const struct acpi_device_id processor_device_ids[] = {
 	{ACPI_PROCESSOR_OBJECT_HID, 0},
-	{ACPI_PROCESSOR_HID, 0},
+	{"ACPI0007", 0},
 	{"", 0},
 };
 MODULE_DEVICE_TABLE(acpi, processor_device_ids);
@@ -596,7 +596,21 @@ static int acpi_processor_get_info(struct acpi_device *device)
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 				  "No bus mastering arbitration control\n"));
 
-	if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_HID)) {
+	if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_OBJECT_HID)) {
+		/* Declared with "Processor" statement; match ProcessorID */
+		status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer);
+		if (ACPI_FAILURE(status)) {
+			printk(KERN_ERR PREFIX "Evaluating processor object\n");
+			return -ENODEV;
+		}
+
+		/*
+		 * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP.
+		 *      >>> 'acpi_get_processor_id(acpi_id, &id)' in
+		 *      arch/xxx/acpi.c
+		 */
+		pr->acpi_id = object.processor.proc_id;
+	} else {
 		/*
 		 * Declared with "Device" statement; match _UID.
 		 * Note that we don't handle string _UIDs yet.
@@ -611,20 +625,6 @@ static int acpi_processor_get_info(struct acpi_device *device)
 		}
 		device_declaration = 1;
 		pr->acpi_id = value;
-	} else {
-		/* Declared with "Processor" statement; match ProcessorID */
-		status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer);
-		if (ACPI_FAILURE(status)) {
-			printk(KERN_ERR PREFIX "Evaluating processor object\n");
-			return -ENODEV;
-		}
-
-		/*
-		 * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP.
-		 *      >>> 'acpi_get_processor_id(acpi_id, &id)' in
-		 *      arch/xxx/acpi.c
-		 */
-		pr->acpi_id = object.processor.proc_id;
 	}
 	cpu_index = get_cpu_id(pr->handle, device_declaration, pr->acpi_id);
 
@@ -649,7 +649,16 @@ static int acpi_processor_get_info(struct acpi_device *device)
 			return -ENODEV;
 		}
 	}
-
+	/*
+	 * On some boxes several processors use the same processor bus id.
+	 * But they are located in different scope. For example:
+	 * \_SB.SCK0.CPU0
+	 * \_SB.SCK1.CPU0
+	 * Rename the processor device bus id. And the new bus id will be
+	 * generated as the following format:
+	 * CPU+CPU ID.
+	 */
+	sprintf(acpi_device_bid(device), "CPU%X", pr->id);
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Processor [%d:%d]\n", pr->id,
 			  pr->acpi_id));
 
@@ -731,6 +740,8 @@ static int __cpuinit acpi_processor_start(struct acpi_device *device)
 	/* _PDC call should be done before doing anything else (if reqd.). */
 	arch_acpi_processor_init_pdc(pr);
 	acpi_processor_set_pdc(pr);
+	arch_acpi_processor_cleanup_pdc(pr);
+
 #ifdef CONFIG_CPU_FREQ
 	acpi_processor_ppc_has_changed(pr);
 #endif

drivers/acpi/processor_idle.c

@@ -139,7 +139,7 @@ static void acpi_safe_halt(void)
  * are affected too. We pick the most conservative approach: we assume
  * that the local APIC stops in both C2 and C3.
  */
-static void acpi_timer_check_state(int state, struct acpi_processor *pr,
+static void lapic_timer_check_state(int state, struct acpi_processor *pr,
 				   struct acpi_processor_cx *cx)
 {
 	struct acpi_processor_power *pwr = &pr->power;
@@ -162,7 +162,7 @@ static void acpi_timer_check_state(int state, struct acpi_processor *pr,
 		pr->power.timer_broadcast_on_state = state;
 }
 
-static void acpi_propagate_timer_broadcast(struct acpi_processor *pr)
+static void lapic_timer_propagate_broadcast(struct acpi_processor *pr)
 {
 	unsigned long reason;
 
@@ -173,7 +173,7 @@ static void acpi_propagate_timer_broadcast(struct acpi_processor *pr)
 }
 
 /* Power(C) State timer broadcast control */
-static void acpi_state_timer_broadcast(struct acpi_processor *pr,
+static void lapic_timer_state_broadcast(struct acpi_processor *pr,
 				       struct acpi_processor_cx *cx,
 				       int broadcast)
 {
@@ -190,10 +190,10 @@ static void acpi_state_timer_broadcast(struct acpi_processor *pr,
 
 #else
 
-static void acpi_timer_check_state(int state, struct acpi_processor *pr,
+static void lapic_timer_check_state(int state, struct acpi_processor *pr,
 				   struct acpi_processor_cx *cstate) { }
-static void acpi_propagate_timer_broadcast(struct acpi_processor *pr) { }
-static void acpi_state_timer_broadcast(struct acpi_processor *pr,
+static void lapic_timer_propagate_broadcast(struct acpi_processor *pr) { }
+static void lapic_timer_state_broadcast(struct acpi_processor *pr,
 				       struct acpi_processor_cx *cx,
 				       int broadcast)
 {
@@ -515,7 +515,8 @@ static void acpi_processor_power_verify_c2(struct acpi_processor_cx *cx)
 static void acpi_processor_power_verify_c3(struct acpi_processor *pr,
 					   struct acpi_processor_cx *cx)
 {
-	static int bm_check_flag;
+	static int bm_check_flag = -1;
+	static int bm_control_flag = -1;
 
 
 	if (!cx->address)
@@ -545,12 +546,14 @@ static void acpi_processor_power_verify_c3(struct acpi_processor *pr,
 	}
 
 	/* All the logic here assumes flags.bm_check is same across all CPUs */
-	if (!bm_check_flag) {
+	if (bm_check_flag == -1) {
 		/* Determine whether bm_check is needed based on CPU  */
 		acpi_processor_power_init_bm_check(&(pr->flags), pr->id);
 		bm_check_flag = pr->flags.bm_check;
+		bm_control_flag = pr->flags.bm_control;
 	} else {
 		pr->flags.bm_check = bm_check_flag;
+		pr->flags.bm_control = bm_control_flag;
 	}
 
 	if (pr->flags.bm_check) {
@@ -614,29 +617,25 @@ static int acpi_processor_power_verify(struct acpi_processor *pr)
 		switch (cx->type) {
 		case ACPI_STATE_C1:
 			cx->valid = 1;
-			acpi_timer_check_state(i, pr, cx);
 			break;
 
 		case ACPI_STATE_C2:
 			acpi_processor_power_verify_c2(cx);
-			if (cx->valid)
-				acpi_timer_check_state(i, pr, cx);
 			break;
 
 		case ACPI_STATE_C3:
 			acpi_processor_power_verify_c3(pr, cx);
-			if (cx->valid)
-				acpi_timer_check_state(i, pr, cx);
 			break;
 		}
-		if (cx->valid)
-			tsc_check_state(cx->type);
+		if (!cx->valid)
+			continue;
 
-		if (cx->valid)
-			working++;
+		lapic_timer_check_state(i, pr, cx);
+		tsc_check_state(cx->type);
+		working++;
 	}
 
-	acpi_propagate_timer_broadcast(pr);
+	lapic_timer_propagate_broadcast(pr);
 
 	return (working);
 }
@@ -839,7 +838,7 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev,
 		return 0;
 	}
 
-	acpi_state_timer_broadcast(pr, cx, 1);
+	lapic_timer_state_broadcast(pr, cx, 1);
 	kt1 = ktime_get_real();
 	acpi_idle_do_entry(cx);
 	kt2 = ktime_get_real();
@@ -847,7 +846,7 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev,
 
 	local_irq_enable();
 	cx->usage++;
-	acpi_state_timer_broadcast(pr, cx, 0);
+	lapic_timer_state_broadcast(pr, cx, 0);
 
 	return idle_time;
 }
@@ -892,7 +891,7 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev,
 	 * Must be done before busmaster disable as we might need to
 	 * access HPET !
 	 */
-	acpi_state_timer_broadcast(pr, cx, 1);
+	lapic_timer_state_broadcast(pr, cx, 1);
 
 	if (cx->type == ACPI_STATE_C3)
 		ACPI_FLUSH_CPU_CACHE();
@@ -914,7 +913,7 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev,
 
 	cx->usage++;
 
-	acpi_state_timer_broadcast(pr, cx, 0);
+	lapic_timer_state_broadcast(pr, cx, 0);
 	cx->time += sleep_ticks;
 	return idle_time;
 }
@@ -981,7 +980,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,
 	 * Must be done before busmaster disable as we might need to
 	 * access HPET !
 	 */
-	acpi_state_timer_broadcast(pr, cx, 1);
+	lapic_timer_state_broadcast(pr, cx, 1);
 
 	kt1 = ktime_get_real();
 	/*
@@ -1026,7 +1025,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,
 
 	cx->usage++;
 
-	acpi_state_timer_broadcast(pr, cx, 0);
+	lapic_timer_state_broadcast(pr, cx, 0);
 	cx->time += sleep_ticks;
 	return idle_time;
 }

drivers/acpi/scan.c

@@ -95,7 +95,7 @@ acpi_device_modalias_show(struct device *dev, struct device_attribute *attr, cha
 }
 static DEVICE_ATTR(modalias, 0444, acpi_device_modalias_show, NULL);
 
-static int acpi_bus_hot_remove_device(void *context)
+static void acpi_bus_hot_remove_device(void *context)
 {
 	struct acpi_device *device;
 	acpi_handle handle = context;
@@ -104,10 +104,10 @@ static int acpi_bus_hot_remove_device(void *context)
 	acpi_status status = AE_OK;
 
 	if (acpi_bus_get_device(handle, &device))
-		return 0;
+		return;
 
 	if (!device)
-		return 0;
+		return;
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 		"Hot-removing device %s...\n", dev_name(&device->dev)));
@@ -115,7 +115,7 @@ static int acpi_bus_hot_remove_device(void *context)
 	if (acpi_bus_trim(device, 1)) {
 		printk(KERN_ERR PREFIX
 				"Removing device failed\n");
-		return -1;
+		return;
 	}
 
 	/* power off device */
@@ -142,9 +142,10 @@ static int acpi_bus_hot_remove_device(void *context)
 	 */
 	status = acpi_evaluate_object(handle, "_EJ0", &arg_list, NULL);
 	if (ACPI_FAILURE(status))
-		return -ENODEV;
+		printk(KERN_WARNING PREFIX
+				"Eject device failed\n");
 
-	return 0;
+	return;
 }
 
 static ssize_t
@@ -155,7 +156,6 @@ acpi_eject_store(struct device *d, struct device_attribute *attr,
 	acpi_status status;
 	acpi_object_type type = 0;
 	struct acpi_device *acpi_device = to_acpi_device(d);
-	struct task_struct *task;
 
 	if ((!count) || (buf[0] != '1')) {
 		return -EINVAL;
@@ -172,11 +172,7 @@ acpi_eject_store(struct device *d, struct device_attribute *attr,
 		goto err;
 	}
 
-	/* remove the device in another thread to fix the deadlock issue */
-	task = kthread_run(acpi_bus_hot_remove_device,
-				acpi_device->handle, "acpi_hot_remove_device");
-	if (IS_ERR(task))
-		ret = PTR_ERR(task);
+	acpi_os_hotplug_execute(acpi_bus_hot_remove_device, acpi_device->handle);
 err:
 	return ret;
 }
@@ -198,12 +194,12 @@ acpi_device_path_show(struct device *dev, struct device_attribute *attr, char *b
 	int result;
 
 	result = acpi_get_name(acpi_dev->handle, ACPI_FULL_PATHNAME, &path);
-	if(result)
+	if (result)
 		goto end;
 
 	result = sprintf(buf, "%s\n", (char*)path.pointer);
 	kfree(path.pointer);
-  end:
+end:
 	return result;
 }
 static DEVICE_ATTR(path, 0444, acpi_device_path_show, NULL);
@@ -217,21 +213,21 @@ static int acpi_device_setup_files(struct acpi_device *dev)
 	/*
 	 * Devices gotten from FADT don't have a "path" attribute
 	 */
-	if(dev->handle) {
+	if (dev->handle) {
 		result = device_create_file(&dev->dev, &dev_attr_path);
-		if(result)
+		if (result)
 			goto end;
 	}
 
-	if(dev->flags.hardware_id) {
+	if (dev->flags.hardware_id) {
 		result = device_create_file(&dev->dev, &dev_attr_hid);
-		if(result)
+		if (result)
 			goto end;
 	}
 
-	if (dev->flags.hardware_id || dev->flags.compatible_ids){
+	if (dev->flags.hardware_id || dev->flags.compatible_ids) {
 		result = device_create_file(&dev->dev, &dev_attr_modalias);
-		if(result)
+		if (result)
 			goto end;
 	}
 
@@ -242,7 +238,7 @@ static int acpi_device_setup_files(struct acpi_device *dev)
 	status = acpi_get_handle(dev->handle, "_EJ0", &temp);
 	if (ACPI_SUCCESS(status))
 		result = device_create_file(&dev->dev, &dev_attr_eject);
-  end:
+end:
 	return result;
 }
 
@@ -262,9 +258,9 @@ static void acpi_device_remove_files(struct acpi_device *dev)
 	if (dev->flags.hardware_id || dev->flags.compatible_ids)
 		device_remove_file(&dev->dev, &dev_attr_modalias);
 
-	if(dev->flags.hardware_id)
+	if (dev->flags.hardware_id)
 		device_remove_file(&dev->dev, &dev_attr_hid);
-	if(dev->handle)
+	if (dev->handle)
 		device_remove_file(&dev->dev, &dev_attr_path);
 }
 /* --------------------------------------------------------------------------
@@ -512,7 +508,7 @@ static int acpi_device_register(struct acpi_device *device,
 			break;
 		}
 	}
-	if(!found) {
+	if (!found) {
 		acpi_device_bus_id = new_bus_id;
 		strcpy(acpi_device_bus_id->bus_id, device->flags.hardware_id ? device->pnp.hardware_id : "device");
 		acpi_device_bus_id->instance_no = 0;
@@ -530,22 +526,21 @@ static int acpi_device_register(struct acpi_device *device,
 	if (device->parent)
 		device->dev.parent = &parent->dev;
 	device->dev.bus = &acpi_bus_type;
-	device_initialize(&device->dev);
 	device->dev.release = &acpi_device_release;
-	result = device_add(&device->dev);
-	if(result) {
-		dev_err(&device->dev, "Error adding device\n");
+	result = device_register(&device->dev);
+	if (result) {
+		dev_err(&device->dev, "Error registering device\n");
 		goto end;
 	}
 
 	result = acpi_device_setup_files(device);
-	if(result)
+	if (result)
 		printk(KERN_ERR PREFIX "Error creating sysfs interface for device %s\n",
 		       dev_name(&device->dev));
 
 	device->removal_type = ACPI_BUS_REMOVAL_NORMAL;
 	return 0;
-  end:
+end:
 	mutex_lock(&acpi_device_lock);
 	if (device->parent)
 		list_del(&device->node);
@@ -577,7 +572,7 @@ static void acpi_device_unregister(struct acpi_device *device, int type)
  * @device: the device to add and initialize
  * @driver: driver for the device
  *
- * Used to initialize a device via its device driver.  Called whenever a 
+ * Used to initialize a device via its device driver.  Called whenever a
  * driver is bound to a device.  Invokes the driver's add() ops.
  */
 static int
@@ -585,7 +580,6 @@ acpi_bus_driver_init(struct acpi_device *device, struct acpi_driver *driver)
 {
 	int result = 0;
 
-
 	if (!device || !driver)
 		return -EINVAL;
 
@@ -802,7 +796,7 @@ static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device)
 	if (!acpi_match_device_ids(device, button_device_ids))
 		device->wakeup.flags.run_wake = 1;
 
-      end:
+end:
 	if (ACPI_FAILURE(status))
 		device->flags.wake_capable = 0;
 	return 0;
@@ -1070,7 +1064,7 @@ static void acpi_device_set_id(struct acpi_device *device,
 		break;
 	}
 
-	/* 
+	/*
 	 * \_SB
 	 * ----
 	 * Fix for the system root bus device -- the only root-level device.
@@ -1320,7 +1314,7 @@ acpi_add_single_object(struct acpi_device **child,
 			device->parent->ops.bind(device);
 	}
 
-      end:
+end:
 	if (!result)
 		*child = device;
 	else {
@@ -1464,7 +1458,6 @@ acpi_bus_add(struct acpi_device **child,
 
 	return result;
 }
-
 EXPORT_SYMBOL(acpi_bus_add);
 
 int acpi_bus_start(struct acpi_device *device)
@@ -1484,7 +1477,6 @@ int acpi_bus_start(struct acpi_device *device)
 	}
 	return result;
 }
-
 EXPORT_SYMBOL(acpi_bus_start);
 
 int acpi_bus_trim(struct acpi_device *start, int rmdevice)
@@ -1542,7 +1534,6 @@ int acpi_bus_trim(struct acpi_device *start, int rmdevice)
 }
 EXPORT_SYMBOL_GPL(acpi_bus_trim);
 
-
 static int acpi_bus_scan_fixed(struct acpi_device *root)
 {
 	int result = 0;
@@ -1610,6 +1601,6 @@ int __init acpi_scan_init(void)
 	if (result)
 		acpi_device_unregister(acpi_root, ACPI_BUS_REMOVAL_NORMAL);
 
-      Done:
+Done:
 	return result;
 }

drivers/acpi/video.c

@@ -76,6 +76,7 @@ MODULE_LICENSE("GPL");
 static int brightness_switch_enabled = 1;
 module_param(brightness_switch_enabled, bool, 0644);
 
+static int register_count = 0;
 static int acpi_video_bus_add(struct acpi_device *device);
 static int acpi_video_bus_remove(struct acpi_device *device, int type);
 static int acpi_video_resume(struct acpi_device *device);
@@ -586,6 +587,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
 		DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"),
 		},
 	},
+	{
+	 .callback = video_set_bqc_offset,
+	 .ident = "Acer Aspire 7720",
+	 .matches = {
+		DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720"),
+		},
+	},
 	{}
 };
 
@@ -976,6 +985,11 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device)
 		device->backlight->props.max_brightness = device->brightness->count-3;
 		kfree(name);
 
+		result = sysfs_create_link(&device->backlight->dev.kobj,
+					   &device->dev->dev.kobj, "device");
+		if (result)
+			printk(KERN_ERR PREFIX "Create sysfs link\n");
+
 		device->cdev = thermal_cooling_device_register("LCD",
 					device->dev, &video_cooling_ops);
 		if (IS_ERR(device->cdev))
@@ -1054,15 +1068,15 @@ static void acpi_video_bus_find_cap(struct acpi_video_bus *video)
 static int acpi_video_bus_check(struct acpi_video_bus *video)
 {
 	acpi_status status = -ENOENT;
-	struct device *dev;
+	struct pci_dev *dev;
 
 	if (!video)
 		return -EINVAL;
 
-	dev = acpi_get_physical_pci_device(video->device->handle);
+	dev = acpi_get_pci_dev(video->device->handle);
 	if (!dev)
 		return -ENODEV;
-	put_device(dev);
+	pci_dev_put(dev);
 
 	/* Since there is no HID, CID and so on for VGA driver, we have
 	 * to check well known required nodes.
@@ -1990,6 +2004,7 @@ static int acpi_video_bus_put_one_device(struct acpi_video_device *device)
 	status = acpi_remove_notify_handler(device->dev->handle,
 					    ACPI_DEVICE_NOTIFY,
 					    acpi_video_device_notify);
+	sysfs_remove_link(&device->backlight->dev.kobj, "device");
 	backlight_device_unregister(device->backlight);
 	if (device->cdev) {
 		sysfs_remove_link(&device->dev->dev.kobj,
@@ -2318,6 +2333,13 @@ static int __init intel_opregion_present(void)
 int acpi_video_register(void)
 {
 	int result = 0;
+	if (register_count) {
+		/*
+		 * if the function of acpi_video_register is already called,
+		 * don't register the acpi_vide_bus again and return no error.
+		 */
+		return 0;
+	}
 
 	acpi_video_dir = proc_mkdir(ACPI_VIDEO_CLASS, acpi_root_dir);
 	if (!acpi_video_dir)
@@ -2329,10 +2351,35 @@ int acpi_video_register(void)
 		return -ENODEV;
 	}
 
+	/*
+	 * When the acpi_video_bus is loaded successfully, increase
+	 * the counter reference.
+	 */
+	register_count = 1;
+
 	return 0;
 }
 EXPORT_SYMBOL(acpi_video_register);
 
+void acpi_video_unregister(void)
+{
+	if (!register_count) {
+		/*
+		 * If the acpi video bus is already unloaded, don't
+		 * unload it again and return directly.
+		 */
+		return;
+	}
+	acpi_bus_unregister_driver(&acpi_video_bus);
+
+	remove_proc_entry(ACPI_VIDEO_CLASS, acpi_root_dir);
+
+	register_count = 0;
+
+	return;
+}
+EXPORT_SYMBOL(acpi_video_unregister);
+
 /*
  * This is kind of nasty. Hardware using Intel chipsets may require
  * the video opregion code to be run first in order to initialise
@@ -2350,16 +2397,12 @@ static int __init acpi_video_init(void)
 	return acpi_video_register();
 }
 
-void acpi_video_exit(void)
+static void __exit acpi_video_exit(void)
 {
-
-	acpi_bus_unregister_driver(&acpi_video_bus);
-
-	remove_proc_entry(ACPI_VIDEO_CLASS, acpi_root_dir);
+	acpi_video_unregister();
 
 	return;
 }
-EXPORT_SYMBOL(acpi_video_exit);
 
 module_init(acpi_video_init);
 module_exit(acpi_video_exit);

drivers/acpi/video_detect.c

@@ -10,7 +10,7 @@
  * assinged
  *
  * After PCI devices are glued with ACPI devices
- * acpi_get_physical_pci_device() can be called to identify ACPI graphics
+ * acpi_get_pci_dev() can be called to identify ACPI graphics
  * devices for which a real graphics card is plugged in
  *
  * Now acpi_video_get_capabilities() can be called to check which
@@ -36,6 +36,7 @@
 
 #include <linux/acpi.h>
 #include <linux/dmi.h>
+#include <linux/pci.h>
 
 ACPI_MODULE_NAME("video");
 #define _COMPONENT		ACPI_VIDEO_COMPONENT
@@ -109,7 +110,7 @@ static acpi_status
 find_video(acpi_handle handle, u32 lvl, void *context, void **rv)
 {
 	long *cap = context;
-	struct device *dev;
+	struct pci_dev *dev;
 	struct acpi_device *acpi_dev;
 
 	const struct acpi_device_id video_ids[] = {
@@ -120,10 +121,10 @@ find_video(acpi_handle handle, u32 lvl, void *context, void **rv)
 		return AE_OK;
 
 	if (!acpi_match_device_ids(acpi_dev, video_ids)) {
-		dev = acpi_get_physical_pci_device(handle);
+		dev = acpi_get_pci_dev(handle);
 		if (!dev)
 			return AE_OK;
-		put_device(dev);
+		pci_dev_put(dev);
 		*cap |= acpi_is_video_device(acpi_dev);
 	}
 	return AE_OK;

drivers/gpu/drm/i915/i915_opregion.c

@@ -419,7 +419,7 @@ void intel_opregion_free(struct drm_device *dev, int suspend)
 		return;
 
 	if (!suspend)
-		acpi_video_exit();
+		acpi_video_unregister();
 
 	opregion->acpi->drdy = 0;
 

drivers/pci/hotplug/acpi_pcihp.c

@@ -354,7 +354,7 @@ acpi_status acpi_get_hp_params_from_firmware(struct pci_bus *bus,
 		status = acpi_run_hpp(handle, hpp);
 		if (ACPI_SUCCESS(status))
 			break;
-		if (acpi_root_bridge(handle))
+		if (acpi_is_root_bridge(handle))
 			break;
 		status = acpi_get_parent(handle, &phandle);
 		if (ACPI_FAILURE(status))
@@ -428,7 +428,7 @@ int acpi_get_hp_hw_control_from_firmware(struct pci_dev *pdev, u32 flags)
 		status = acpi_run_oshp(handle);
 		if (ACPI_SUCCESS(status))
 			goto got_one;
-		if (acpi_root_bridge(handle))
+		if (acpi_is_root_bridge(handle))
 			break;
 		chandle = handle;
 		status = acpi_get_parent(chandle, &handle);
@@ -449,42 +449,6 @@ got_one:
 }
 EXPORT_SYMBOL(acpi_get_hp_hw_control_from_firmware);
 
-/* acpi_root_bridge - check to see if this acpi object is a root bridge
- *
- * @handle - the acpi object in question.
- */
-int acpi_root_bridge(acpi_handle handle)
-{
-	acpi_status status;
-	struct acpi_device_info *info;
-	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
-	int i;
-
-	status = acpi_get_object_info(handle, &buffer);
-	if (ACPI_SUCCESS(status)) {
-		info = buffer.pointer;
-		if ((info->valid & ACPI_VALID_HID) &&
-			!strcmp(PCI_ROOT_HID_STRING,
-					info->hardware_id.value)) {
-			kfree(buffer.pointer);
-			return 1;
-		}
-		if (info->valid & ACPI_VALID_CID) {
-			for (i=0; i < info->compatibility_id.count; i++) {
-				if (!strcmp(PCI_ROOT_HID_STRING,
-					info->compatibility_id.id[i].value)) {
-					kfree(buffer.pointer);
-					return 1;
-				}
-			}
-		}
-		kfree(buffer.pointer);
-	}
-	return 0;
-}
-EXPORT_SYMBOL_GPL(acpi_root_bridge);
-
-
 static int is_ejectable(acpi_handle handle)
 {
 	acpi_status status;

drivers/pci/hotplug/acpiphp_glue.c

@@ -678,18 +678,9 @@ static void remove_bridge(acpi_handle handle)
 
 static struct pci_dev * get_apic_pci_info(acpi_handle handle)
 {
-	struct acpi_pci_id id;
-	struct pci_bus *bus;
 	struct pci_dev *dev;
 
-	if (ACPI_FAILURE(acpi_get_pci_id(handle, &id)))
-		return NULL;
-
-	bus = pci_find_bus(id.segment, id.bus);
-	if (!bus)
-		return NULL;
-
-	dev = pci_get_slot(bus, PCI_DEVFN(id.device, id.function));
+	dev = acpi_get_pci_dev(handle);
 	if (!dev)
 		return NULL;
 
@@ -1396,19 +1387,16 @@ static void acpiphp_sanitize_bus(struct pci_bus *bus)
 /* Program resources in newly inserted bridge */
 static int acpiphp_configure_bridge (acpi_handle handle)
 {
-	struct acpi_pci_id pci_id;
+	struct pci_dev *dev;
 	struct pci_bus *bus;
 
-	if (ACPI_FAILURE(acpi_get_pci_id(handle, &pci_id))) {
+	dev = acpi_get_pci_dev(handle);
+	if (!dev) {
 		err("cannot get PCI domain and bus number for bridge\n");
 		return -EINVAL;
 	}
-	bus = pci_find_bus(pci_id.segment, pci_id.bus);
-	if (!bus) {
-		err("cannot find bus %d:%d\n",
-				pci_id.segment, pci_id.bus);
-		return -EINVAL;
-	}
+
+	bus = dev->bus;
 
 	pci_bus_size_bridges(bus);
 	pci_bus_assign_resources(bus);
@@ -1416,6 +1404,7 @@ static int acpiphp_configure_bridge (acpi_handle handle)
 	acpiphp_set_hpp_values(handle, bus);
 	pci_enable_bridges(bus);
 	acpiphp_configure_ioapics(handle);
+	pci_dev_put(dev);
 	return 0;
 }
 
@@ -1631,7 +1620,7 @@ find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
 {
 	int *count = (int *)context;
 
-	if (acpi_root_bridge(handle)) {
+	if (acpi_is_root_bridge(handle)) {
 		acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
 				handle_hotplug_event_bridge, NULL);
 			(*count)++;

drivers/platform/x86/Kconfig

@@ -34,6 +34,23 @@ config ACER_WMI
 	  If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
 	  here.
 
+config ACERHDF
+	tristate "Acer Aspire One temperature and fan driver"
+	depends on THERMAL && THERMAL_HWMON && ACPI
+	---help---
+	  This is a driver for Acer Aspire One netbooks. It allows to access
+	  the temperature sensor and to control the fan.
+
+	  After loading this driver the BIOS is still in control of the fan.
+	  To let the kernel handle the fan, do:
+	  echo -n enabled > /sys/class/thermal/thermal_zone0/mode
+
+	  For more information about this driver see
+	  <http://piie.net/files/acerhdf_README.txt>
+
+	  If you have an Acer Aspire One netbook, say Y or M
+	  here.
+
 config ASUS_LAPTOP
 	tristate "Asus Laptop Extras (EXPERIMENTAL)"
 	depends on ACPI

drivers/platform/x86/Makefile

@@ -9,6 +9,7 @@ obj-$(CONFIG_COMPAL_LAPTOP)	+= compal-laptop.o
 obj-$(CONFIG_DELL_LAPTOP)	+= dell-laptop.o
 obj-$(CONFIG_DELL_WMI)		+= dell-wmi.o
 obj-$(CONFIG_ACER_WMI)		+= acer-wmi.o
+obj-$(CONFIG_ACERHDF)		+= acerhdf.o
 obj-$(CONFIG_HP_WMI)		+= hp-wmi.o
 obj-$(CONFIG_TC1100_WMI)	+= tc1100-wmi.o
 obj-$(CONFIG_SONY_LAPTOP)	+= sony-laptop.o

drivers/platform/x86/acerhdf.c

@@ -0,0 +1,602 @@
+/*
+ * acerhdf - A driver which monitors the temperature
+ *           of the aspire one netbook, turns on/off the fan
+ *           as soon as the upper/lower threshold is reached.
+ *
+ * (C) 2009 - Peter Feuerer     peter (a) piie.net
+ *                              http://piie.net
+ *     2009 Borislav Petkov <petkovbb@gmail.com>
+ *
+ * Inspired by and many thanks to:
+ *  o acerfand   - Rachel Greenham
+ *  o acer_ec.pl - Michael Kurz     michi.kurz (at) googlemail.com
+ *               - Petr Tomasek     tomasek (#) etf,cuni,cz
+ *               - Carlos Corbacho  cathectic (at) gmail.com
+ *  o lkml       - Matthew Garrett
+ *               - Borislav Petkov
+ *               - Andreas Mohr
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define pr_fmt(fmt) "acerhdf: " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/dmi.h>
+#include <acpi/acpi_drivers.h>
+#include <linux/sched.h>
+#include <linux/thermal.h>
+#include <linux/platform_device.h>
+
+/*
+ * The driver is started with "kernel mode off" by default. That means, the BIOS
+ * is still in control of the fan. In this mode the driver allows to read the
+ * temperature of the cpu and a userspace tool may take over control of the fan.
+ * If the driver is switched to "kernel mode" (e.g. via module parameter) the
+ * driver is in full control of the fan. If you want the module to be started in
+ * kernel mode by default, define the following:
+ */
+#undef START_IN_KERNEL_MODE
+
+#define DRV_VER "0.5.13"
+
+/*
+ * According to the Atom N270 datasheet,
+ * (http://download.intel.com/design/processor/datashts/320032.pdf) the
+ * CPU's optimal operating limits denoted in junction temperature as
+ * measured by the on-die thermal monitor are within 0 <= Tj <= 90. So,
+ * assume 89°C is critical temperature.
+ */
+#define ACERHDF_TEMP_CRIT 89
+#define ACERHDF_FAN_OFF 0
+#define ACERHDF_FAN_AUTO 1
+
+/*
+ * No matter what value the user puts into the fanon variable, turn on the fan
+ * at 80 degree Celsius to prevent hardware damage
+ */
+#define ACERHDF_MAX_FANON 80
+
+/*
+ * Maximum interval between two temperature checks is 15 seconds, as the die
+ * can get hot really fast under heavy load (plus we shouldn't forget about
+ * possible impact of _external_ aggressive sources such as heaters, sun etc.)
+ */
+#define ACERHDF_MAX_INTERVAL 15
+
+#ifdef START_IN_KERNEL_MODE
+static int kernelmode = 1;
+#else
+static int kernelmode;
+#endif
+
+static unsigned int interval = 10;
+static unsigned int fanon = 63;
+static unsigned int fanoff = 58;
+static unsigned int verbose;
+static unsigned int fanstate = ACERHDF_FAN_AUTO;
+static char force_bios[16];
+static unsigned int prev_interval;
+struct thermal_zone_device *thz_dev;
+struct thermal_cooling_device *cl_dev;
+struct platform_device *acerhdf_dev;
+
+module_param(kernelmode, uint, 0);
+MODULE_PARM_DESC(kernelmode, "Kernel mode fan control on / off");
+module_param(interval, uint, 0600);
+MODULE_PARM_DESC(interval, "Polling interval of temperature check");
+module_param(fanon, uint, 0600);
+MODULE_PARM_DESC(fanon, "Turn the fan on above this temperature");
+module_param(fanoff, uint, 0600);
+MODULE_PARM_DESC(fanoff, "Turn the fan off below this temperature");
+module_param(verbose, uint, 0600);
+MODULE_PARM_DESC(verbose, "Enable verbose dmesg output");
+module_param_string(force_bios, force_bios, 16, 0);
+MODULE_PARM_DESC(force_bios, "Force BIOS version and omit BIOS check");
+
+/* BIOS settings */
+struct bios_settings_t {
+	const char *vendor;
+	const char *version;
+	unsigned char fanreg;
+	unsigned char tempreg;
+	unsigned char fancmd[2]; /* fan off and auto commands */
+};
+
+/* Register addresses and values for different BIOS versions */
+static const struct bios_settings_t bios_tbl[] = {
+	{"Acer", "v0.3109", 0x55, 0x58, {0x1f, 0x00} },
+	{"Acer", "v0.3114", 0x55, 0x58, {0x1f, 0x00} },
+	{"Acer", "v0.3301", 0x55, 0x58, {0xaf, 0x00} },
+	{"Acer", "v0.3304", 0x55, 0x58, {0xaf, 0x00} },
+	{"Acer", "v0.3305", 0x55, 0x58, {0xaf, 0x00} },
+	{"Acer", "v0.3308", 0x55, 0x58, {0x21, 0x00} },
+	{"Acer", "v0.3309", 0x55, 0x58, {0x21, 0x00} },
+	{"Acer", "v0.3310", 0x55, 0x58, {0x21, 0x00} },
+	{"Gateway", "v0.3103", 0x55, 0x58, {0x21, 0x00} },
+	{"Packard Bell", "v0.3105", 0x55, 0x58, {0x21, 0x00} },
+	{"", "", 0, 0, {0, 0} }
+};
+
+static const struct bios_settings_t *bios_cfg __read_mostly;
+
+
+static int acerhdf_get_temp(int *temp)
+{
+	u8 read_temp;
+
+	if (ec_read(bios_cfg->tempreg, &read_temp))
+		return -EINVAL;
+
+	*temp = read_temp;
+
+	return 0;
+}
+
+static int acerhdf_get_fanstate(int *state)
+{
+	u8 fan;
+	bool tmp;
+
+	if (ec_read(bios_cfg->fanreg, &fan))
+		return -EINVAL;
+
+	tmp = (fan == bios_cfg->fancmd[ACERHDF_FAN_OFF]);
+	*state = tmp ? ACERHDF_FAN_OFF : ACERHDF_FAN_AUTO;
+
+	return 0;
+}
+
+static void acerhdf_change_fanstate(int state)
+{
+	unsigned char cmd;
+
+	if (verbose)
+		pr_notice("fan %s\n", (state == ACERHDF_FAN_OFF) ?
+				"OFF" : "ON");
+
+	if ((state != ACERHDF_FAN_OFF) && (state != ACERHDF_FAN_AUTO)) {
+		pr_err("invalid fan state %d requested, setting to auto!\n",
+			state);
+		state = ACERHDF_FAN_AUTO;
+	}
+
+	cmd = bios_cfg->fancmd[state];
+	fanstate = state;
+
+	ec_write(bios_cfg->fanreg, cmd);
+}
+
+static void acerhdf_check_param(struct thermal_zone_device *thermal)
+{
+	if (fanon > ACERHDF_MAX_FANON) {
+		pr_err("fanon temperature too high, set to %d\n",
+				ACERHDF_MAX_FANON);
+		fanon = ACERHDF_MAX_FANON;
+	}
+
+	if (kernelmode && prev_interval != interval) {
+		if (interval > ACERHDF_MAX_INTERVAL) {
+			pr_err("interval too high, set to %d\n",
+				ACERHDF_MAX_INTERVAL);
+			interval = ACERHDF_MAX_INTERVAL;
+		}
+		if (verbose)
+			pr_notice("interval changed to: %d\n",
+					interval);
+		thermal->polling_delay = interval*1000;
+		prev_interval = interval;
+	}
+}
+
+/*
+ * This is the thermal zone callback which does the delayed polling of the fan
+ * state. We do check /sysfs-originating settings here in acerhdf_check_param()
+ * as late as the polling interval is since we can't do that in the respective
+ * accessors of the module parameters.
+ */
+static int acerhdf_get_ec_temp(struct thermal_zone_device *thermal,
+			       unsigned long *t)
+{
+	int temp, err = 0;
+
+	acerhdf_check_param(thermal);
+
+	err = acerhdf_get_temp(&temp);
+	if (err)
+		return err;
+
+	if (verbose)
+		pr_notice("temp %d\n", temp);
+
+	*t = temp;
+	return 0;
+}
+
+static int acerhdf_bind(struct thermal_zone_device *thermal,
+			struct thermal_cooling_device *cdev)
+{
+	/* if the cooling device is the one from acerhdf bind it */
+	if (cdev != cl_dev)
+		return 0;
+
+	if (thermal_zone_bind_cooling_device(thermal, 0, cdev)) {
+		pr_err("error binding cooling dev\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int acerhdf_unbind(struct thermal_zone_device *thermal,
+			  struct thermal_cooling_device *cdev)
+{
+	if (cdev != cl_dev)
+		return 0;
+
+	if (thermal_zone_unbind_cooling_device(thermal, 0, cdev)) {
+		pr_err("error unbinding cooling dev\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static inline void acerhdf_revert_to_bios_mode(void)
+{
+	acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+	kernelmode = 0;
+	if (thz_dev)
+		thz_dev->polling_delay = 0;
+	pr_notice("kernel mode fan control OFF\n");
+}
+static inline void acerhdf_enable_kernelmode(void)
+{
+	kernelmode = 1;
+
+	thz_dev->polling_delay = interval*1000;
+	thermal_zone_device_update(thz_dev);
+	pr_notice("kernel mode fan control ON\n");
+}
+
+static int acerhdf_get_mode(struct thermal_zone_device *thermal,
+			    enum thermal_device_mode *mode)
+{
+	if (verbose)
+		pr_notice("kernel mode fan control %d\n", kernelmode);
+
+	*mode = (kernelmode) ? THERMAL_DEVICE_ENABLED
+			     : THERMAL_DEVICE_DISABLED;
+
+	return 0;
+}
+
+/*
+ * set operation mode;
+ * enabled: the thermal layer of the kernel takes care about
+ *          the temperature and the fan.
+ * disabled: the BIOS takes control of the fan.
+ */
+static int acerhdf_set_mode(struct thermal_zone_device *thermal,
+			    enum thermal_device_mode mode)
+{
+	if (mode == THERMAL_DEVICE_DISABLED && kernelmode)
+		acerhdf_revert_to_bios_mode();
+	else if (mode == THERMAL_DEVICE_ENABLED && !kernelmode)
+		acerhdf_enable_kernelmode();
+
+	return 0;
+}
+
+static int acerhdf_get_trip_type(struct thermal_zone_device *thermal, int trip,
+				 enum thermal_trip_type *type)
+{
+	if (trip == 0)
+		*type = THERMAL_TRIP_ACTIVE;
+
+	return 0;
+}
+
+static int acerhdf_get_trip_temp(struct thermal_zone_device *thermal, int trip,
+				 unsigned long *temp)
+{
+	if (trip == 0)
+		*temp = fanon;
+
+	return 0;
+}
+
+static int acerhdf_get_crit_temp(struct thermal_zone_device *thermal,
+				 unsigned long *temperature)
+{
+	*temperature = ACERHDF_TEMP_CRIT;
+	return 0;
+}
+
+/* bind callback functions to thermalzone */
+struct thermal_zone_device_ops acerhdf_dev_ops = {
+	.bind = acerhdf_bind,
+	.unbind = acerhdf_unbind,
+	.get_temp = acerhdf_get_ec_temp,
+	.get_mode = acerhdf_get_mode,
+	.set_mode = acerhdf_set_mode,
+	.get_trip_type = acerhdf_get_trip_type,
+	.get_trip_temp = acerhdf_get_trip_temp,
+	.get_crit_temp = acerhdf_get_crit_temp,
+};
+
+
+/*
+ * cooling device callback functions
+ * get maximal fan cooling state
+ */
+static int acerhdf_get_max_state(struct thermal_cooling_device *cdev,
+				 unsigned long *state)
+{
+	*state = 1;
+
+	return 0;
+}
+
+static int acerhdf_get_cur_state(struct thermal_cooling_device *cdev,
+				 unsigned long *state)
+{
+	int err = 0, tmp;
+
+	err = acerhdf_get_fanstate(&tmp);
+	if (err)
+		return err;
+
+	*state = (tmp == ACERHDF_FAN_AUTO) ? 1 : 0;
+	return 0;
+}
+
+/* change current fan state - is overwritten when running in kernel mode */
+static int acerhdf_set_cur_state(struct thermal_cooling_device *cdev,
+				 unsigned long state)
+{
+	int cur_temp, cur_state, err = 0;
+
+	if (!kernelmode)
+		return 0;
+
+	err = acerhdf_get_temp(&cur_temp);
+	if (err) {
+		pr_err("error reading temperature, hand off control to BIOS\n");
+		goto err_out;
+	}
+
+	err = acerhdf_get_fanstate(&cur_state);
+	if (err) {
+		pr_err("error reading fan state, hand off control to BIOS\n");
+		goto err_out;
+	}
+
+	if (state == 0) {
+		/* turn fan off only if below fanoff temperature */
+		if ((cur_state == ACERHDF_FAN_AUTO) &&
+		    (cur_temp < fanoff))
+			acerhdf_change_fanstate(ACERHDF_FAN_OFF);
+	} else {
+		if (cur_state == ACERHDF_FAN_OFF)
+			acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+	}
+	return 0;
+
+err_out:
+	acerhdf_revert_to_bios_mode();
+	return -EINVAL;
+}
+
+/* bind fan callbacks to fan device */
+struct thermal_cooling_device_ops acerhdf_cooling_ops = {
+	.get_max_state = acerhdf_get_max_state,
+	.get_cur_state = acerhdf_get_cur_state,
+	.set_cur_state = acerhdf_set_cur_state,
+};
+
+/* suspend / resume functionality */
+static int acerhdf_suspend(struct platform_device *dev, pm_message_t state)
+{
+	if (kernelmode)
+		acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+
+	if (verbose)
+		pr_notice("going suspend\n");
+
+	return 0;
+}
+
+static int acerhdf_resume(struct platform_device *device)
+{
+	if (verbose)
+		pr_notice("resuming\n");
+
+	return 0;
+}
+
+static int __devinit acerhdf_probe(struct platform_device *device)
+{
+	return 0;
+}
+
+static int acerhdf_remove(struct platform_device *device)
+{
+	return 0;
+}
+
+struct platform_driver acerhdf_drv = {
+	.driver = {
+		.name = "acerhdf",
+		.owner = THIS_MODULE,
+	},
+	.probe = acerhdf_probe,
+	.remove = acerhdf_remove,
+	.suspend = acerhdf_suspend,
+	.resume = acerhdf_resume,
+};
+
+
+/* check hardware */
+static int acerhdf_check_hardware(void)
+{
+	char const *vendor, *version, *product;
+	int i;
+
+	/* get BIOS data */
+	vendor  = dmi_get_system_info(DMI_SYS_VENDOR);
+	version = dmi_get_system_info(DMI_BIOS_VERSION);
+	product = dmi_get_system_info(DMI_PRODUCT_NAME);
+
+	pr_info("Acer Aspire One Fan driver, v.%s\n", DRV_VER);
+
+	if (!force_bios[0]) {
+		if (strncmp(product, "AO", 2)) {
+			pr_err("no Aspire One hardware found\n");
+			return -EINVAL;
+		}
+	} else {
+		pr_info("forcing BIOS version: %s\n", version);
+		version = force_bios;
+		kernelmode = 0;
+	}
+
+	if (verbose)
+		pr_info("BIOS info: %s %s, product: %s\n",
+			vendor, version, product);
+
+	/* search BIOS version and vendor in BIOS settings table */
+	for (i = 0; bios_tbl[i].version[0]; i++) {
+		if (!strcmp(bios_tbl[i].vendor, vendor) &&
+		    !strcmp(bios_tbl[i].version, version)) {
+			bios_cfg = &bios_tbl[i];
+			break;
+		}
+	}
+
+	if (!bios_cfg) {
+		pr_err("unknown (unsupported) BIOS version %s/%s, "
+			"please report, aborting!\n", vendor, version);
+		return -EINVAL;
+	}
+
+	/*
+	 * if started with kernel mode off, prevent the kernel from switching
+	 * off the fan
+	 */
+	if (!kernelmode) {
+		pr_notice("Fan control off, to enable do:\n");
+		pr_notice("echo -n \"enabled\" > "
+			"/sys/class/thermal/thermal_zone0/mode\n");
+	}
+
+	return 0;
+}
+
+static int acerhdf_register_platform(void)
+{
+	int err = 0;
+
+	err = platform_driver_register(&acerhdf_drv);
+	if (err)
+		return err;
+
+	acerhdf_dev = platform_device_alloc("acerhdf", -1);
+	platform_device_add(acerhdf_dev);
+
+	return 0;
+}
+
+static void acerhdf_unregister_platform(void)
+{
+	if (!acerhdf_dev)
+		return;
+
+	platform_device_del(acerhdf_dev);
+	platform_driver_unregister(&acerhdf_drv);
+}
+
+static int acerhdf_register_thermal(void)
+{
+	cl_dev = thermal_cooling_device_register("acerhdf-fan", NULL,
+						 &acerhdf_cooling_ops);
+
+	if (IS_ERR(cl_dev))
+		return -EINVAL;
+
+	thz_dev = thermal_zone_device_register("acerhdf", 1, NULL,
+					      &acerhdf_dev_ops, 0, 0, 0,
+					      (kernelmode) ? interval*1000 : 0);
+	if (IS_ERR(thz_dev))
+		return -EINVAL;
+
+	return 0;
+}
+
+static void acerhdf_unregister_thermal(void)
+{
+	if (cl_dev) {
+		thermal_cooling_device_unregister(cl_dev);
+		cl_dev = NULL;
+	}
+
+	if (thz_dev) {
+		thermal_zone_device_unregister(thz_dev);
+		thz_dev = NULL;
+	}
+}
+
+static int __init acerhdf_init(void)
+{
+	int err = 0;
+
+	err = acerhdf_check_hardware();
+	if (err)
+		goto out_err;
+
+	err = acerhdf_register_platform();
+	if (err)
+		goto err_unreg;
+
+	err = acerhdf_register_thermal();
+	if (err)
+		goto err_unreg;
+
+	return 0;
+
+err_unreg:
+	acerhdf_unregister_thermal();
+	acerhdf_unregister_platform();
+
+out_err:
+	return -ENODEV;
+}
+
+static void __exit acerhdf_exit(void)
+{
+	acerhdf_change_fanstate(ACERHDF_FAN_AUTO);
+	acerhdf_unregister_thermal();
+	acerhdf_unregister_platform();
+}
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Peter Feuerer");
+MODULE_DESCRIPTION("Aspire One temperature and fan driver");
+MODULE_ALIAS("dmi:*:*Acer*:*:");
+MODULE_ALIAS("dmi:*:*Gateway*:*:");
+MODULE_ALIAS("dmi:*:*Packard Bell*:*:");
+
+module_init(acerhdf_init);
+module_exit(acerhdf_exit);

drivers/platform/x86/dell-wmi.c

@@ -46,10 +46,53 @@ struct key_entry {
 	u16 keycode;
 };
 
-enum { KE_KEY, KE_SW, KE_END };
+enum { KE_KEY, KE_SW, KE_IGNORE, KE_END };
+
+/*
+ * Certain keys are flagged as KE_IGNORE. All of these are either
+ * notifications (rather than requests for change) or are also sent
+ * via the keyboard controller so should not be sent again.
+ */
 
 static struct key_entry dell_wmi_keymap[] = {
 	{KE_KEY, 0xe045, KEY_PROG1},
+	{KE_KEY, 0xe009, KEY_EJECTCD},
+
+	/* These also contain the brightness level at offset 6 */
+	{KE_KEY, 0xe006, KEY_BRIGHTNESSUP},
+	{KE_KEY, 0xe005, KEY_BRIGHTNESSDOWN},
+
+	/* Battery health status button */
+	{KE_KEY, 0xe007, KEY_BATTERY},
+
+	/* This is actually for all radios. Although physically a
+	 * switch, the notification does not provide an indication of
+	 * state and so it should be reported as a key */
+	{KE_KEY, 0xe008, KEY_WLAN},
+
+	/* The next device is at offset 6, the active devices are at
+	   offset 8 and the attached devices at offset 10 */
+	{KE_KEY, 0xe00b, KEY_DISPLAYTOGGLE},
+
+	{KE_IGNORE, 0xe00c, KEY_KBDILLUMTOGGLE},
+
+	/* BIOS error detected */
+	{KE_IGNORE, 0xe00d, KEY_RESERVED},
+
+	/* Wifi Catcher */
+	{KE_KEY, 0xe011, KEY_PROG2},
+
+	/* Ambient light sensor toggle */
+	{KE_IGNORE, 0xe013, KEY_RESERVED},
+
+	{KE_IGNORE, 0xe020, KEY_MUTE},
+	{KE_IGNORE, 0xe02e, KEY_VOLUMEDOWN},
+	{KE_IGNORE, 0xe030, KEY_VOLUMEUP},
+	{KE_IGNORE, 0xe033, KEY_KBDILLUMUP},
+	{KE_IGNORE, 0xe034, KEY_KBDILLUMDOWN},
+	{KE_IGNORE, 0xe03a, KEY_CAPSLOCK},
+	{KE_IGNORE, 0xe045, KEY_NUMLOCK},
+	{KE_IGNORE, 0xe046, KEY_SCROLLLOCK},
 	{KE_END, 0}
 };
 
@@ -122,15 +165,20 @@ static void dell_wmi_notify(u32 value, void *context)
 
 	if (obj && obj->type == ACPI_TYPE_BUFFER) {
 		int *buffer = (int *)obj->buffer.pointer;
-		key = dell_wmi_get_entry_by_scancode(buffer[1]);
+		/*
+		 *  The upper bytes of the event may contain
+		 *  additional information, so mask them off for the
+		 *  scancode lookup
+		 */
+		key = dell_wmi_get_entry_by_scancode(buffer[1] & 0xFFFF);
 		if (key) {
 			input_report_key(dell_wmi_input_dev, key->keycode, 1);
 			input_sync(dell_wmi_input_dev);
 			input_report_key(dell_wmi_input_dev, key->keycode, 0);
 			input_sync(dell_wmi_input_dev);
-		} else
+		} else if (buffer[1] & 0xFFFF)
 			printk(KERN_INFO "dell-wmi: Unknown key %x pressed\n",
-			       buffer[1]);
+			       buffer[1] & 0xFFFF);
 	}
 }
 

drivers/platform/x86/hp-wmi.c

@@ -47,7 +47,7 @@ MODULE_ALIAS("wmi:5FB7F034-2C63-45e9-BE91-3D44E2C707E4");
 #define HPWMI_DISPLAY_QUERY 0x1
 #define HPWMI_HDDTEMP_QUERY 0x2
 #define HPWMI_ALS_QUERY 0x3
-#define HPWMI_DOCK_QUERY 0x4
+#define HPWMI_HARDWARE_QUERY 0x4
 #define HPWMI_WIRELESS_QUERY 0x5
 #define HPWMI_HOTKEY_QUERY 0xc
 
@@ -75,10 +75,9 @@ struct key_entry {
 	u16 keycode;
 };
 
-enum { KE_KEY, KE_SW, KE_END };
+enum { KE_KEY, KE_END };
 
 static struct key_entry hp_wmi_keymap[] = {
-	{KE_SW, 0x01, SW_DOCK},
 	{KE_KEY, 0x02, KEY_BRIGHTNESSUP},
 	{KE_KEY, 0x03, KEY_BRIGHTNESSDOWN},
 	{KE_KEY, 0x20e6, KEY_PROG1},
@@ -151,7 +150,22 @@ static int hp_wmi_als_state(void)
 
 static int hp_wmi_dock_state(void)
 {
-	return hp_wmi_perform_query(HPWMI_DOCK_QUERY, 0, 0);
+	int ret = hp_wmi_perform_query(HPWMI_HARDWARE_QUERY, 0, 0);
+
+	if (ret < 0)
+		return ret;
+
+	return ret & 0x1;
+}
+
+static int hp_wmi_tablet_state(void)
+{
+	int ret = hp_wmi_perform_query(HPWMI_HARDWARE_QUERY, 0, 0);
+
+	if (ret < 0)
+		return ret;
+
+	return (ret & 0x4) ? 1 : 0;
 }
 
 static int hp_wmi_set_block(void *data, bool blocked)
@@ -232,6 +246,15 @@ static ssize_t show_dock(struct device *dev, struct device_attribute *attr,
 	return sprintf(buf, "%d\n", value);
 }
 
+static ssize_t show_tablet(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	int value = hp_wmi_tablet_state();
+	if (value < 0)
+		return -EINVAL;
+	return sprintf(buf, "%d\n", value);
+}
+
 static ssize_t set_als(struct device *dev, struct device_attribute *attr,
 		       const char *buf, size_t count)
 {
@@ -244,6 +267,7 @@ static DEVICE_ATTR(display, S_IRUGO, show_display, NULL);
 static DEVICE_ATTR(hddtemp, S_IRUGO, show_hddtemp, NULL);
 static DEVICE_ATTR(als, S_IRUGO | S_IWUSR, show_als, set_als);
 static DEVICE_ATTR(dock, S_IRUGO, show_dock, NULL);
+static DEVICE_ATTR(tablet, S_IRUGO, show_tablet, NULL);
 
 static struct key_entry *hp_wmi_get_entry_by_scancode(int code)
 {
@@ -326,13 +350,13 @@ static void hp_wmi_notify(u32 value, void *context)
 						 key->keycode, 0);
 				input_sync(hp_wmi_input_dev);
 				break;
-			case KE_SW:
-				input_report_switch(hp_wmi_input_dev,
-						    key->keycode,
-						    hp_wmi_dock_state());
-				input_sync(hp_wmi_input_dev);
-				break;
 			}
+		} else if (eventcode == 0x1) {
+			input_report_switch(hp_wmi_input_dev, SW_DOCK,
+					    hp_wmi_dock_state());
+			input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
+					    hp_wmi_tablet_state());
+			input_sync(hp_wmi_input_dev);
 		} else if (eventcode == 0x5) {
 			if (wifi_rfkill)
 				rfkill_set_sw_state(wifi_rfkill,
@@ -369,18 +393,19 @@ static int __init hp_wmi_input_setup(void)
 			set_bit(EV_KEY, hp_wmi_input_dev->evbit);
 			set_bit(key->keycode, hp_wmi_input_dev->keybit);
 			break;
-		case KE_SW:
-			set_bit(EV_SW, hp_wmi_input_dev->evbit);
-			set_bit(key->keycode, hp_wmi_input_dev->swbit);
-
-			/* Set initial dock state */
-			input_report_switch(hp_wmi_input_dev, key->keycode,
-					    hp_wmi_dock_state());
-			input_sync(hp_wmi_input_dev);
-			break;
 		}
 	}
 
+	set_bit(EV_SW, hp_wmi_input_dev->evbit);
+	set_bit(SW_DOCK, hp_wmi_input_dev->swbit);
+	set_bit(SW_TABLET_MODE, hp_wmi_input_dev->swbit);
+
+	/* Set initial hardware state */
+	input_report_switch(hp_wmi_input_dev, SW_DOCK, hp_wmi_dock_state());
+	input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
+			    hp_wmi_tablet_state());
+	input_sync(hp_wmi_input_dev);
+
 	err = input_register_device(hp_wmi_input_dev);
 
 	if (err) {
@@ -397,6 +422,7 @@ static void cleanup_sysfs(struct platform_device *device)
 	device_remove_file(&device->dev, &dev_attr_hddtemp);
 	device_remove_file(&device->dev, &dev_attr_als);
 	device_remove_file(&device->dev, &dev_attr_dock);
+	device_remove_file(&device->dev, &dev_attr_tablet);
 }
 
 static int __init hp_wmi_bios_setup(struct platform_device *device)
@@ -414,6 +440,9 @@ static int __init hp_wmi_bios_setup(struct platform_device *device)
 	if (err)
 		goto add_sysfs_error;
 	err = device_create_file(&device->dev, &dev_attr_dock);
+	if (err)
+		goto add_sysfs_error;
+	err = device_create_file(&device->dev, &dev_attr_tablet);
 	if (err)
 		goto add_sysfs_error;
 
@@ -485,23 +514,17 @@ static int __exit hp_wmi_bios_remove(struct platform_device *device)
 
 static int hp_wmi_resume_handler(struct platform_device *device)
 {
-	struct key_entry *key;
-
 	/*
-	 * Docking state may have changed while suspended, so trigger
-	 * an input event for the current state. As this is a switch,
+	 * Hardware state may have changed while suspended, so trigger
+	 * input events for the current state. As this is a switch,
 	 * the input layer will only actually pass it on if the state
 	 * changed.
 	 */
-	for (key = hp_wmi_keymap; key->type != KE_END; key++) {
-		switch (key->type) {
-		case KE_SW:
-			input_report_switch(hp_wmi_input_dev, key->keycode,
-					    hp_wmi_dock_state());
-			input_sync(hp_wmi_input_dev);
-			break;
-		}
-	}
+
+	input_report_switch(hp_wmi_input_dev, SW_DOCK, hp_wmi_dock_state());
+	input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
+			    hp_wmi_tablet_state());
+	input_sync(hp_wmi_input_dev);
 
 	return 0;
 }

drivers/platform/x86/thinkpad_acpi.c

@@ -22,7 +22,7 @@
  */
 
 #define TPACPI_VERSION "0.23"
-#define TPACPI_SYSFS_VERSION 0x020300
+#define TPACPI_SYSFS_VERSION 0x020400
 
 /*
  *  Changelog:
@@ -257,6 +257,8 @@ static struct {
 	u32 wan:1;
 	u32 uwb:1;
 	u32 fan_ctrl_status_undef:1;
+	u32 second_fan:1;
+	u32 beep_needs_two_args:1;
 	u32 input_device_registered:1;
 	u32 platform_drv_registered:1;
 	u32 platform_drv_attrs_registered:1;
@@ -277,8 +279,10 @@ struct thinkpad_id_data {
 	char *bios_version_str;	/* Something like 1ZET51WW (1.03z) */
 	char *ec_version_str;	/* Something like 1ZHT51WW-1.04a */
 
-	u16 bios_model;		/* Big Endian, TP-1Y = 0x5931, 0 = unknown */
+	u16 bios_model;		/* 1Y = 0x5931, 0 = unknown */
 	u16 ec_model;
+	u16 bios_release;	/* 1ZETK1WW = 0x314b, 0 = unknown */
+	u16 ec_release;
 
 	char *model_str;	/* ThinkPad T43 */
 	char *nummodel_str;	/* 9384A9C for a 9384-A9C model */
@@ -355,6 +359,73 @@ static void tpacpi_log_usertask(const char * const what)
 		} \
 	} while (0)
 
+/*
+ * Quirk handling helpers
+ *
+ * ThinkPad IDs and versions seen in the field so far
+ * are two-characters from the set [0-9A-Z], i.e. base 36.
+ *
+ * We use values well outside that range as specials.
+ */
+
+#define TPACPI_MATCH_ANY		0xffffU
+#define TPACPI_MATCH_UNKNOWN		0U
+
+/* TPID('1', 'Y') == 0x5931 */
+#define TPID(__c1, __c2) (((__c2) << 8) | (__c1))
+
+#define TPACPI_Q_IBM(__id1, __id2, __quirk)	\
+	{ .vendor = PCI_VENDOR_ID_IBM,		\
+	  .bios = TPID(__id1, __id2),		\
+	  .ec = TPACPI_MATCH_ANY,		\
+	  .quirks = (__quirk) }
+
+#define TPACPI_Q_LNV(__id1, __id2, __quirk)	\
+	{ .vendor = PCI_VENDOR_ID_LENOVO,	\
+	  .bios = TPID(__id1, __id2),		\
+	  .ec = TPACPI_MATCH_ANY,		\
+	  .quirks = (__quirk) }
+
+struct tpacpi_quirk {
+	unsigned int vendor;
+	u16 bios;
+	u16 ec;
+	unsigned long quirks;
+};
+
+/**
+ * tpacpi_check_quirks() - search BIOS/EC version on a list
+ * @qlist:		array of &struct tpacpi_quirk
+ * @qlist_size:		number of elements in @qlist
+ *
+ * Iterates over a quirks list until one is found that matches the
+ * ThinkPad's vendor, BIOS and EC model.
+ *
+ * Returns 0 if nothing matches, otherwise returns the quirks field of
+ * the matching &struct tpacpi_quirk entry.
+ *
+ * The match criteria is: vendor, ec and bios much match.
+ */
+static unsigned long __init tpacpi_check_quirks(
+			const struct tpacpi_quirk *qlist,
+			unsigned int qlist_size)
+{
+	while (qlist_size) {
+		if ((qlist->vendor == thinkpad_id.vendor ||
+				qlist->vendor == TPACPI_MATCH_ANY) &&
+		    (qlist->bios == thinkpad_id.bios_model ||
+				qlist->bios == TPACPI_MATCH_ANY) &&
+		    (qlist->ec == thinkpad_id.ec_model ||
+				qlist->ec == TPACPI_MATCH_ANY))
+			return qlist->quirks;
+
+		qlist_size--;
+		qlist++;
+	}
+	return 0;
+}
+
+
 /****************************************************************************
  ****************************************************************************
  *
@@ -2880,7 +2951,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
 		/* update bright_acpimode... */
 		tpacpi_check_std_acpi_brightness_support();
 
-	if (tp_features.bright_acpimode) {
+	if (tp_features.bright_acpimode && acpi_video_backlight_support()) {
 		printk(TPACPI_INFO
 		       "This ThinkPad has standard ACPI backlight "
 		       "brightness control, supported by the ACPI "
@@ -4773,7 +4844,7 @@ TPACPI_HANDLE(led, ec, "SLED",	/* 570 */
 	   "LED",		/* all others */
 	   );			/* R30, R31 */
 
-#define TPACPI_LED_NUMLEDS 8
+#define TPACPI_LED_NUMLEDS 16
 static struct tpacpi_led_classdev *tpacpi_leds;
 static enum led_status_t tpacpi_led_state_cache[TPACPI_LED_NUMLEDS];
 static const char * const tpacpi_led_names[TPACPI_LED_NUMLEDS] = {
@@ -4786,15 +4857,20 @@ static const char * const tpacpi_led_names[TPACPI_LED_NUMLEDS] = {
 	"tpacpi::dock_batt",
 	"tpacpi::unknown_led",
 	"tpacpi::standby",
+	"tpacpi::dock_status1",
+	"tpacpi::dock_status2",
+	"tpacpi::unknown_led2",
+	"tpacpi::unknown_led3",
+	"tpacpi::thinkvantage",
 };
-#define TPACPI_SAFE_LEDS	0x0081U
+#define TPACPI_SAFE_LEDS	0x1081U
 
 static inline bool tpacpi_is_led_restricted(const unsigned int led)
 {
 #ifdef CONFIG_THINKPAD_ACPI_UNSAFE_LEDS
 	return false;
 #else
-	return (TPACPI_SAFE_LEDS & (1 << led)) == 0;
+	return (1U & (TPACPI_SAFE_LEDS >> led)) == 0;
 #endif
 }
 
@@ -4956,6 +5032,10 @@ static int __init tpacpi_init_led(unsigned int led)
 
 	tpacpi_leds[led].led = led;
 
+	/* LEDs with no name don't get registered */
+	if (!tpacpi_led_names[led])
+		return 0;
+
 	tpacpi_leds[led].led_classdev.brightness_set = &led_sysfs_set;
 	tpacpi_leds[led].led_classdev.blink_set = &led_sysfs_blink_set;
 	if (led_supported == TPACPI_LED_570)
@@ -4974,10 +5054,59 @@ static int __init tpacpi_init_led(unsigned int led)
 	return rc;
 }
 
+static const struct tpacpi_quirk led_useful_qtable[] __initconst = {
+	TPACPI_Q_IBM('1', 'E', 0x009f), /* A30 */
+	TPACPI_Q_IBM('1', 'N', 0x009f), /* A31 */
+	TPACPI_Q_IBM('1', 'G', 0x009f), /* A31 */
+
+	TPACPI_Q_IBM('1', 'I', 0x0097), /* T30 */
+	TPACPI_Q_IBM('1', 'R', 0x0097), /* T40, T41, T42, R50, R51 */
+	TPACPI_Q_IBM('7', '0', 0x0097), /* T43, R52 */
+	TPACPI_Q_IBM('1', 'Y', 0x0097), /* T43 */
+	TPACPI_Q_IBM('1', 'W', 0x0097), /* R50e */
+	TPACPI_Q_IBM('1', 'V', 0x0097), /* R51 */
+	TPACPI_Q_IBM('7', '8', 0x0097), /* R51e */
+	TPACPI_Q_IBM('7', '6', 0x0097), /* R52 */
+
+	TPACPI_Q_IBM('1', 'K', 0x00bf), /* X30 */
+	TPACPI_Q_IBM('1', 'Q', 0x00bf), /* X31, X32 */
+	TPACPI_Q_IBM('1', 'U', 0x00bf), /* X40 */
+	TPACPI_Q_IBM('7', '4', 0x00bf), /* X41 */
+	TPACPI_Q_IBM('7', '5', 0x00bf), /* X41t */
+
+	TPACPI_Q_IBM('7', '9', 0x1f97), /* T60 (1) */
+	TPACPI_Q_IBM('7', '7', 0x1f97), /* Z60* (1) */
+	TPACPI_Q_IBM('7', 'F', 0x1f97), /* Z61* (1) */
+	TPACPI_Q_IBM('7', 'B', 0x1fb7), /* X60 (1) */
+
+	/* (1) - may have excess leds enabled on MSB */
+
+	/* Defaults (order matters, keep last, don't reorder!) */
+	{ /* Lenovo */
+	  .vendor = PCI_VENDOR_ID_LENOVO,
+	  .bios = TPACPI_MATCH_ANY, .ec = TPACPI_MATCH_ANY,
+	  .quirks = 0x1fffU,
+	},
+	{ /* IBM ThinkPads with no EC version string */
+	  .vendor = PCI_VENDOR_ID_IBM,
+	  .bios = TPACPI_MATCH_ANY, .ec = TPACPI_MATCH_UNKNOWN,
+	  .quirks = 0x00ffU,
+	},
+	{ /* IBM ThinkPads with EC version string */
+	  .vendor = PCI_VENDOR_ID_IBM,
+	  .bios = TPACPI_MATCH_ANY, .ec = TPACPI_MATCH_ANY,
+	  .quirks = 0x00bfU,
+	},
+};
+
+#undef TPACPI_LEDQ_IBM
+#undef TPACPI_LEDQ_LNV
+
 static int __init led_init(struct ibm_init_struct *iibm)
 {
 	unsigned int i;
 	int rc;
+	unsigned long useful_leds;
 
 	vdbg_printk(TPACPI_DBG_INIT, "initializing LED subdriver\n");
 
@@ -4999,6 +5128,9 @@ static int __init led_init(struct ibm_init_struct *iibm)
 	vdbg_printk(TPACPI_DBG_INIT, "LED commands are %s, mode %d\n",
 		str_supported(led_supported), led_supported);
 
+	if (led_supported == TPACPI_LED_NONE)
+		return 1;
+
 	tpacpi_leds = kzalloc(sizeof(*tpacpi_leds) * TPACPI_LED_NUMLEDS,
 			      GFP_KERNEL);
 	if (!tpacpi_leds) {
@@ -5006,8 +5138,12 @@ static int __init led_init(struct ibm_init_struct *iibm)
 		return -ENOMEM;
 	}
 
+	useful_leds = tpacpi_check_quirks(led_useful_qtable,
+					  ARRAY_SIZE(led_useful_qtable));
+
 	for (i = 0; i < TPACPI_LED_NUMLEDS; i++) {
-		if (!tpacpi_is_led_restricted(i)) {
+		if (!tpacpi_is_led_restricted(i) &&
+		    test_bit(i, &useful_leds)) {
 			rc = tpacpi_init_led(i);
 			if (rc < 0) {
 				led_exit();
@@ -5017,12 +5153,11 @@ static int __init led_init(struct ibm_init_struct *iibm)
 	}
 
 #ifdef CONFIG_THINKPAD_ACPI_UNSAFE_LEDS
-	if (led_supported != TPACPI_LED_NONE)
-		printk(TPACPI_NOTICE
-			"warning: userspace override of important "
-			"firmware LEDs is enabled\n");
+	printk(TPACPI_NOTICE
+		"warning: userspace override of important "
+		"firmware LEDs is enabled\n");
 #endif
-	return (led_supported != TPACPI_LED_NONE)? 0 : 1;
+	return 0;
 }
 
 #define str_led_status(s) \
@@ -5052,7 +5187,7 @@ static int led_read(char *p)
 	}
 
 	len += sprintf(p + len, "commands:\t"
-		       "<led> on, <led> off, <led> blink (<led> is 0-7)\n");
+		       "<led> on, <led> off, <led> blink (<led> is 0-15)\n");
 
 	return len;
 }
@@ -5067,7 +5202,7 @@ static int led_write(char *buf)
 		return -ENODEV;
 
 	while ((cmd = next_cmd(&buf))) {
-		if (sscanf(cmd, "%d", &led) != 1 || led < 0 || led > 7)
+		if (sscanf(cmd, "%d", &led) != 1 || led < 0 || led > 15)
 			return -EINVAL;
 
 		if (strstr(cmd, "off")) {
@@ -5101,8 +5236,17 @@ static struct ibm_struct led_driver_data = {
 
 TPACPI_HANDLE(beep, ec, "BEEP");	/* all except R30, R31 */
 
+#define TPACPI_BEEP_Q1 0x0001
+
+static const struct tpacpi_quirk beep_quirk_table[] __initconst = {
+	TPACPI_Q_IBM('I', 'M', TPACPI_BEEP_Q1), /* 570 */
+	TPACPI_Q_IBM('I', 'U', TPACPI_BEEP_Q1), /* 570E - unverified */
+};
+
 static int __init beep_init(struct ibm_init_struct *iibm)
 {
+	unsigned long quirks;
+
 	vdbg_printk(TPACPI_DBG_INIT, "initializing beep subdriver\n");
 
 	TPACPI_ACPIHANDLE_INIT(beep);
@@ -5110,6 +5254,11 @@ static int __init beep_init(struct ibm_init_struct *iibm)
 	vdbg_printk(TPACPI_DBG_INIT, "beep is %s\n",
 		str_supported(beep_handle != NULL));
 
+	quirks = tpacpi_check_quirks(beep_quirk_table,
+				     ARRAY_SIZE(beep_quirk_table));
+
+	tp_features.beep_needs_two_args = !!(quirks & TPACPI_BEEP_Q1);
+
 	return (beep_handle)? 0 : 1;
 }
 
@@ -5141,8 +5290,15 @@ static int beep_write(char *buf)
 			/* beep_cmd set */
 		} else
 			return -EINVAL;
-		if (!acpi_evalf(beep_handle, NULL, NULL, "vdd", beep_cmd, 0))
-			return -EIO;
+		if (tp_features.beep_needs_two_args) {
+			if (!acpi_evalf(beep_handle, NULL, NULL, "vdd",
+					beep_cmd, 0))
+				return -EIO;
+		} else {
+			if (!acpi_evalf(beep_handle, NULL, NULL, "vd",
+					beep_cmd))
+				return -EIO;
+		}
 	}
 
 	return 0;
@@ -5569,6 +5725,10 @@ static struct ibm_struct ecdump_driver_data = {
  *   Bit 3-0: backlight brightness level
  *
  * brightness_get_raw returns status data in the HBRV layout
+ *
+ * WARNING: The X61 has been verified to use HBRV for something else, so
+ * this should be used _only_ on IBM ThinkPads, and maybe with some careful
+ * testing on the very early *60 Lenovo models...
  */
 
 enum {
@@ -5869,6 +6029,12 @@ static int __init brightness_init(struct ibm_init_struct *iibm)
 			   brightness_mode);
 	}
 
+	/* Safety */
+	if (thinkpad_id.vendor != PCI_VENDOR_ID_IBM &&
+	    (brightness_mode == TPACPI_BRGHT_MODE_ECNVRAM ||
+	     brightness_mode == TPACPI_BRGHT_MODE_EC))
+		return -EINVAL;
+
 	if (tpacpi_brightness_get_raw(&b) < 0)
 		return 1;
 
@@ -6161,6 +6327,21 @@ static struct ibm_struct volume_driver_data = {
  *	For firmware bugs, refer to:
  *	http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues
  *
+ *	----
+ *
+ *	ThinkPad EC register 0x31 bit 0 (only on select models)
+ *
+ *	When bit 0 of EC register 0x31 is zero, the tachometer registers
+ *	show the speed of the main fan.  When bit 0 of EC register 0x31
+ *	is one, the tachometer registers show the speed of the auxiliary
+ *	fan.
+ *
+ *	Fan control seems to affect both fans, regardless of the state
+ *	of this bit.
+ *
+ *	So far, only the firmware for the X60/X61 non-tablet versions
+ *	seem to support this (firmware TP-7M).
+ *
  * TPACPI_FAN_WR_ACPI_FANS:
  *	ThinkPad X31, X40, X41.  Not available in the X60.
  *
@@ -6187,6 +6368,8 @@ enum {					/* Fan control constants */
 	fan_status_offset = 0x2f,	/* EC register 0x2f */
 	fan_rpm_offset = 0x84,		/* EC register 0x84: LSB, 0x85 MSB (RPM)
 					 * 0x84 must be read before 0x85 */
+	fan_select_offset = 0x31,	/* EC register 0x31 (Firmware 7M)
+					   bit 0 selects which fan is active */
 
 	TP_EC_FAN_FULLSPEED = 0x40,	/* EC fan mode: full speed */
 	TP_EC_FAN_AUTO	    = 0x80,	/* EC fan mode: auto fan control */
@@ -6249,30 +6432,18 @@ TPACPI_HANDLE(sfan, ec, "SFAN",	/* 570 */
  * We assume 0x07 really means auto mode while this quirk is active,
  * as this is far more likely than the ThinkPad being in level 7,
  * which is only used by the firmware during thermal emergencies.
+ *
+ * Enable for TP-1Y (T43), TP-78 (R51e), TP-76 (R52),
+ * TP-70 (T43, R52), which are known to be buggy.
  */
 
-static void fan_quirk1_detect(void)
+static void fan_quirk1_setup(void)
 {
-	/* In some ThinkPads, neither the EC nor the ACPI
-	 * DSDT initialize the HFSP register, and it ends up
-	 * being initially set to 0x07 when it *could* be
-	 * either 0x07 or 0x80.
-	 *
-	 * Enable for TP-1Y (T43), TP-78 (R51e),
-	 * TP-76 (R52), TP-70 (T43, R52), which are known
-	 * to be buggy. */
 	if (fan_control_initial_status == 0x07) {
-		switch (thinkpad_id.ec_model) {
-		case 0x5931: /* TP-1Y */
-		case 0x3837: /* TP-78 */
-		case 0x3637: /* TP-76 */
-		case 0x3037: /* TP-70 */
-			printk(TPACPI_NOTICE
-			       "fan_init: initial fan status is unknown, "
-			       "assuming it is in auto mode\n");
-			tp_features.fan_ctrl_status_undef = 1;
-			;;
-		}
+		printk(TPACPI_NOTICE
+		       "fan_init: initial fan status is unknown, "
+		       "assuming it is in auto mode\n");
+		tp_features.fan_ctrl_status_undef = 1;
 	}
 }
 
@@ -6292,6 +6463,38 @@ static void fan_quirk1_handle(u8 *fan_status)
 	}
 }
 
+/* Select main fan on X60/X61, NOOP on others */
+static bool fan_select_fan1(void)
+{
+	if (tp_features.second_fan) {
+		u8 val;
+
+		if (ec_read(fan_select_offset, &val) < 0)
+			return false;
+		val &= 0xFEU;
+		if (ec_write(fan_select_offset, val) < 0)
+			return false;
+	}
+	return true;
+}
+
+/* Select secondary fan on X60/X61 */
+static bool fan_select_fan2(void)
+{
+	u8 val;
+
+	if (!tp_features.second_fan)
+		return false;
+
+	if (ec_read(fan_select_offset, &val) < 0)
+		return false;
+	val |= 0x01U;
+	if (ec_write(fan_select_offset, val) < 0)
+		return false;
+
+	return true;
+}
+
 /*
  * Call with fan_mutex held
  */
@@ -6369,6 +6572,8 @@ static int fan_get_speed(unsigned int *speed)
 	switch (fan_status_access_mode) {
 	case TPACPI_FAN_RD_TPEC:
 		/* all except 570, 600e/x, 770e, 770x */
+		if (unlikely(!fan_select_fan1()))
+			return -EIO;
 		if (unlikely(!acpi_ec_read(fan_rpm_offset, &lo) ||
 			     !acpi_ec_read(fan_rpm_offset + 1, &hi)))
 			return -EIO;
@@ -6385,6 +6590,34 @@ static int fan_get_speed(unsigned int *speed)
 	return 0;
 }
 
+static int fan2_get_speed(unsigned int *speed)
+{
+	u8 hi, lo;
+	bool rc;
+
+	switch (fan_status_access_mode) {
+	case TPACPI_FAN_RD_TPEC:
+		/* all except 570, 600e/x, 770e, 770x */
+		if (unlikely(!fan_select_fan2()))
+			return -EIO;
+		rc = !acpi_ec_read(fan_rpm_offset, &lo) ||
+			     !acpi_ec_read(fan_rpm_offset + 1, &hi);
+		fan_select_fan1(); /* play it safe */
+		if (rc)
+			return -EIO;
+
+		if (likely(speed))
+			*speed = (hi << 8) | lo;
+
+		break;
+
+	default:
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
 static int fan_set_level(int level)
 {
 	if (!fan_control_allowed)
@@ -6790,6 +7023,25 @@ static struct device_attribute dev_attr_fan_fan1_input =
 	__ATTR(fan1_input, S_IRUGO,
 		fan_fan1_input_show, NULL);
 
+/* sysfs fan fan2_input ------------------------------------------------ */
+static ssize_t fan_fan2_input_show(struct device *dev,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	int res;
+	unsigned int speed;
+
+	res = fan2_get_speed(&speed);
+	if (res < 0)
+		return res;
+
+	return snprintf(buf, PAGE_SIZE, "%u\n", speed);
+}
+
+static struct device_attribute dev_attr_fan_fan2_input =
+	__ATTR(fan2_input, S_IRUGO,
+		fan_fan2_input_show, NULL);
+
 /* sysfs fan fan_watchdog (hwmon driver) ------------------------------- */
 static ssize_t fan_fan_watchdog_show(struct device_driver *drv,
 				     char *buf)
@@ -6823,6 +7075,7 @@ static DRIVER_ATTR(fan_watchdog, S_IWUSR | S_IRUGO,
 static struct attribute *fan_attributes[] = {
 	&dev_attr_fan_pwm1_enable.attr, &dev_attr_fan_pwm1.attr,
 	&dev_attr_fan_fan1_input.attr,
+	NULL, /* for fan2_input */
 	NULL
 };
 
@@ -6830,9 +7083,36 @@ static const struct attribute_group fan_attr_group = {
 	.attrs = fan_attributes,
 };
 
+#define	TPACPI_FAN_Q1	0x0001		/* Unitialized HFSP */
+#define TPACPI_FAN_2FAN	0x0002		/* EC 0x31 bit 0 selects fan2 */
+
+#define TPACPI_FAN_QI(__id1, __id2, __quirks)	\
+	{ .vendor = PCI_VENDOR_ID_IBM,		\
+	  .bios = TPACPI_MATCH_ANY,		\
+	  .ec = TPID(__id1, __id2),		\
+	  .quirks = __quirks }
+
+#define TPACPI_FAN_QL(__id1, __id2, __quirks)	\
+	{ .vendor = PCI_VENDOR_ID_LENOVO,	\
+	  .bios = TPACPI_MATCH_ANY,		\
+	  .ec = TPID(__id1, __id2),		\
+	  .quirks = __quirks }
+
+static const struct tpacpi_quirk fan_quirk_table[] __initconst = {
+	TPACPI_FAN_QI('1', 'Y', TPACPI_FAN_Q1),
+	TPACPI_FAN_QI('7', '8', TPACPI_FAN_Q1),
+	TPACPI_FAN_QI('7', '6', TPACPI_FAN_Q1),
+	TPACPI_FAN_QI('7', '0', TPACPI_FAN_Q1),
+	TPACPI_FAN_QL('7', 'M', TPACPI_FAN_2FAN),
+};
+
+#undef TPACPI_FAN_QL
+#undef TPACPI_FAN_QI
+
 static int __init fan_init(struct ibm_init_struct *iibm)
 {
 	int rc;
+	unsigned long quirks;
 
 	vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_FAN,
 			"initializing fan subdriver\n");
@@ -6843,12 +7123,16 @@ static int __init fan_init(struct ibm_init_struct *iibm)
 	fan_control_commands = 0;
 	fan_watchdog_maxinterval = 0;
 	tp_features.fan_ctrl_status_undef = 0;
+	tp_features.second_fan = 0;
 	fan_control_desired_level = 7;
 
 	TPACPI_ACPIHANDLE_INIT(fans);
 	TPACPI_ACPIHANDLE_INIT(gfan);
 	TPACPI_ACPIHANDLE_INIT(sfan);
 
+	quirks = tpacpi_check_quirks(fan_quirk_table,
+				     ARRAY_SIZE(fan_quirk_table));
+
 	if (gfan_handle) {
 		/* 570, 600e/x, 770e, 770x */
 		fan_status_access_mode = TPACPI_FAN_RD_ACPI_GFAN;
@@ -6858,7 +7142,13 @@ static int __init fan_init(struct ibm_init_struct *iibm)
 		if (likely(acpi_ec_read(fan_status_offset,
 					&fan_control_initial_status))) {
 			fan_status_access_mode = TPACPI_FAN_RD_TPEC;
-			fan_quirk1_detect();
+			if (quirks & TPACPI_FAN_Q1)
+				fan_quirk1_setup();
+			if (quirks & TPACPI_FAN_2FAN) {
+				tp_features.second_fan = 1;
+				dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_FAN,
+					"secondary fan support enabled\n");
+			}
 		} else {
 			printk(TPACPI_ERR
 			       "ThinkPad ACPI EC access misbehaving, "
@@ -6914,6 +7204,11 @@ static int __init fan_init(struct ibm_init_struct *iibm)
 
 	if (fan_status_access_mode != TPACPI_FAN_NONE ||
 	    fan_control_access_mode != TPACPI_FAN_WR_NONE) {
+		if (tp_features.second_fan) {
+			/* attach second fan tachometer */
+			fan_attributes[ARRAY_SIZE(fan_attributes)-2] =
+					&dev_attr_fan_fan2_input.attr;
+		}
 		rc = sysfs_create_group(&tpacpi_sensors_pdev->dev.kobj,
 					 &fan_attr_group);
 		if (rc < 0)
@@ -7385,6 +7680,24 @@ err_out:
 
 /* Probing */
 
+static bool __pure __init tpacpi_is_fw_digit(const char c)
+{
+	return (c >= '0' && c <= '9') || (c >= 'A' && c <= 'Z');
+}
+
+/* Most models: xxyTkkWW (#.##c); Ancient 570/600 and -SL lacks (#.##c) */
+static bool __pure __init tpacpi_is_valid_fw_id(const char* const s,
+						const char t)
+{
+	return s && strlen(s) >= 8 &&
+		tpacpi_is_fw_digit(s[0]) &&
+		tpacpi_is_fw_digit(s[1]) &&
+		s[2] == t && s[3] == 'T' &&
+		tpacpi_is_fw_digit(s[4]) &&
+		tpacpi_is_fw_digit(s[5]) &&
+		s[6] == 'W' && s[7] == 'W';
+}
+
 /* returns 0 - probe ok, or < 0 - probe error.
  * Probe ok doesn't mean thinkpad found.
  * On error, kfree() cleanup on tp->* is not performed, caller must do it */
@@ -7411,10 +7724,15 @@ static int __must_check __init get_thinkpad_model_data(
 	tp->bios_version_str = kstrdup(s, GFP_KERNEL);
 	if (s && !tp->bios_version_str)
 		return -ENOMEM;
-	if (!tp->bios_version_str)
+
+	/* Really ancient ThinkPad 240X will fail this, which is fine */
+	if (!tpacpi_is_valid_fw_id(tp->bios_version_str, 'E'))
 		return 0;
+
 	tp->bios_model = tp->bios_version_str[0]
 			 | (tp->bios_version_str[1] << 8);
+	tp->bios_release = (tp->bios_version_str[4] << 8)
+			 | tp->bios_version_str[5];
 
 	/*
 	 * ThinkPad T23 or newer, A31 or newer, R50e or newer,
@@ -7433,8 +7751,21 @@ static int __must_check __init get_thinkpad_model_data(
 			tp->ec_version_str = kstrdup(ec_fw_string, GFP_KERNEL);
 			if (!tp->ec_version_str)
 				return -ENOMEM;
-			tp->ec_model = ec_fw_string[0]
-					| (ec_fw_string[1] << 8);
+
+			if (tpacpi_is_valid_fw_id(ec_fw_string, 'H')) {
+				tp->ec_model = ec_fw_string[0]
+						| (ec_fw_string[1] << 8);
+				tp->ec_release = (ec_fw_string[4] << 8)
+						| ec_fw_string[5];
+			} else {
+				printk(TPACPI_NOTICE
+					"ThinkPad firmware release %s "
+					"doesn't match the known patterns\n",
+					ec_fw_string);
+				printk(TPACPI_NOTICE
+					"please report this to %s\n",
+					TPACPI_MAIL);
+			}
 			break;
 		}
 	}

drivers/pnp/pnpacpi/rsparser.c

@@ -287,6 +287,25 @@ static void pnpacpi_parse_allocated_address_space(struct pnp_dev *dev,
 				ACPI_DECODE_16);
 }
 
+static void pnpacpi_parse_allocated_ext_address_space(struct pnp_dev *dev,
+						      struct acpi_resource *res)
+{
+	struct acpi_resource_extended_address64 *p = &res->data.ext_address64;
+
+	if (p->producer_consumer == ACPI_PRODUCER)
+		return;
+
+	if (p->resource_type == ACPI_MEMORY_RANGE)
+		pnpacpi_parse_allocated_memresource(dev,
+			p->minimum, p->address_length,
+			p->info.mem.write_protect);
+	else if (p->resource_type == ACPI_IO_RANGE)
+		pnpacpi_parse_allocated_ioresource(dev,
+			p->minimum, p->address_length,
+			p->granularity == 0xfff ? ACPI_DECODE_10 :
+				ACPI_DECODE_16);
+}
+
 static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res,
 					      void *data)
 {
@@ -400,8 +419,7 @@ static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res,
 		break;
 
 	case ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64:
-		if (res->data.ext_address64.producer_consumer == ACPI_PRODUCER)
-			return AE_OK;
+		pnpacpi_parse_allocated_ext_address_space(dev, res);
 		break;
 
 	case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
@@ -630,6 +648,28 @@ static __init void pnpacpi_parse_address_option(struct pnp_dev *dev,
 					   IORESOURCE_IO_FIXED);
 }
 
+static __init void pnpacpi_parse_ext_address_option(struct pnp_dev *dev,
+						    unsigned int option_flags,
+						    struct acpi_resource *r)
+{
+	struct acpi_resource_extended_address64 *p = &r->data.ext_address64;
+	unsigned char flags = 0;
+
+	if (p->address_length == 0)
+		return;
+
+	if (p->resource_type == ACPI_MEMORY_RANGE) {
+		if (p->info.mem.write_protect == ACPI_READ_WRITE_MEMORY)
+			flags = IORESOURCE_MEM_WRITEABLE;
+		pnp_register_mem_resource(dev, option_flags, p->minimum,
+					  p->minimum, 0, p->address_length,
+					  flags);
+	} else if (p->resource_type == ACPI_IO_RANGE)
+		pnp_register_port_resource(dev, option_flags, p->minimum,
+					   p->minimum, 0, p->address_length,
+					   IORESOURCE_IO_FIXED);
+}
+
 struct acpipnp_parse_option_s {
 	struct pnp_dev *dev;
 	unsigned int option_flags;
@@ -711,6 +751,7 @@ static __init acpi_status pnpacpi_option_resource(struct acpi_resource *res,
 		break;
 
 	case ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64:
+		pnpacpi_parse_ext_address_option(dev, option_flags, res);
 		break;
 
 	case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
@@ -765,6 +806,7 @@ static int pnpacpi_supported_resource(struct acpi_resource *res)
 	case ACPI_RESOURCE_TYPE_ADDRESS16:
 	case ACPI_RESOURCE_TYPE_ADDRESS32:
 	case ACPI_RESOURCE_TYPE_ADDRESS64:
+	case ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64:
 	case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
 		return 1;
 	}

include/acpi/acpi_bus.h

@@ -168,7 +168,7 @@ struct acpi_device_dir {
 
 /* Plug and Play */
 
-typedef char acpi_bus_id[5];
+typedef char acpi_bus_id[8];
 typedef unsigned long acpi_bus_address;
 typedef char acpi_hardware_id[15];
 typedef char acpi_unique_id[9];
@@ -365,10 +365,10 @@ struct acpi_bus_type {
 int register_acpi_bus_type(struct acpi_bus_type *);
 int unregister_acpi_bus_type(struct acpi_bus_type *);
 struct device *acpi_get_physical_device(acpi_handle);
-struct device *acpi_get_physical_pci_device(acpi_handle);
 
 /* helper */
 acpi_handle acpi_get_child(acpi_handle, acpi_integer);
+int acpi_is_root_bridge(acpi_handle);
 acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int);
 #define DEVICE_ACPI_HANDLE(dev) ((acpi_handle)((dev)->archdata.acpi_handle))
 

include/acpi/acpi_drivers.h

@@ -57,8 +57,7 @@
  */
 
 #define ACPI_POWER_HID			"LNXPOWER"
-#define ACPI_PROCESSOR_OBJECT_HID	"ACPI_CPU"
-#define ACPI_PROCESSOR_HID		"ACPI0007"
+#define ACPI_PROCESSOR_OBJECT_HID	"LNXCPU"
 #define ACPI_SYSTEM_HID			"LNXSYSTM"
 #define ACPI_THERMAL_HID		"LNXTHERM"
 #define ACPI_BUTTON_HID_POWERF		"LNXPWRBN"
@@ -91,17 +90,15 @@ int acpi_pci_link_free_irq(acpi_handle handle);
 
 /* ACPI PCI Interrupt Routing (pci_irq.c) */
 
-int acpi_pci_irq_add_prt(acpi_handle handle, int segment, int bus);
-void acpi_pci_irq_del_prt(int segment, int bus);
+int acpi_pci_irq_add_prt(acpi_handle handle, struct pci_bus *bus);
+void acpi_pci_irq_del_prt(struct pci_bus *bus);
 
 /* ACPI PCI Device Binding (pci_bind.c) */
 
 struct pci_bus;
 
-acpi_status acpi_get_pci_id(acpi_handle handle, struct acpi_pci_id *id);
-int acpi_pci_bind(struct acpi_device *device);
-int acpi_pci_bind_root(struct acpi_device *device, struct acpi_pci_id *id,
-		       struct pci_bus *bus);
+struct pci_dev *acpi_get_pci_dev(acpi_handle);
+int acpi_pci_bind_root(struct acpi_device *device);
 
 /* Arch-defined function to add a bus to the system */
 

include/acpi/processor.h

@@ -258,6 +258,7 @@ DECLARE_PER_CPU(struct acpi_processor *, processors);
 extern struct acpi_processor_errata errata;
 
 void arch_acpi_processor_init_pdc(struct acpi_processor *pr);
+void arch_acpi_processor_cleanup_pdc(struct acpi_processor *pr);
 
 #ifdef ARCH_HAS_POWER_INIT
 void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags,

include/acpi/video.h

@@ -3,10 +3,10 @@
 
 #if (defined CONFIG_ACPI_VIDEO || defined CONFIG_ACPI_VIDEO_MODULE)
 extern int acpi_video_register(void);
-extern int acpi_video_exit(void);
+extern void acpi_video_unregister(void);
 #else
 static inline int acpi_video_register(void) { return 0; }
-static inline void acpi_video_exit(void) { return; }
+static inline void acpi_video_unregister(void) { return; }
 #endif
 
 #endif

include/linux/acpi.h

@@ -113,9 +113,6 @@ void acpi_irq_stats_init(void);
 extern u32 acpi_irq_handled;
 extern u32 acpi_irq_not_handled;
 
-extern struct acpi_mcfg_allocation *pci_mmcfg_config;
-extern int pci_mmcfg_config_num;
-
 extern int sbf_port;
 extern unsigned long acpi_realmode_flags;
 
@@ -293,7 +290,10 @@ void __init acpi_s4_no_nvs(void);
 				OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL)
 
 extern acpi_status acpi_pci_osc_control_set(acpi_handle handle, u32 flags);
+extern void acpi_early_init(void);
+
 #else	/* CONFIG_ACPI */
+static inline void acpi_early_init(void) { }
 
 static inline int early_acpi_boot_init(void)
 {

include/linux/pci_hotplug.h

@@ -229,7 +229,6 @@ struct hotplug_params {
 extern acpi_status acpi_get_hp_params_from_firmware(struct pci_bus *bus,
 				struct hotplug_params *hpp);
 int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags);
-int acpi_root_bridge(acpi_handle handle);
 int acpi_pci_check_ejectable(struct pci_bus *pbus, acpi_handle handle);
 int acpi_pci_detect_ejectable(struct pci_bus *pbus);
 #endif

init/main.c

@@ -24,6 +24,7 @@
 #include <linux/smp_lock.h>
 #include <linux/initrd.h>
 #include <linux/bootmem.h>
+#include <linux/acpi.h>
 #include <linux/tty.h>
 #include <linux/gfp.h>
 #include <linux/percpu.h>
@@ -88,11 +89,6 @@ extern void sbus_init(void);
 extern void prio_tree_init(void);
 extern void radix_tree_init(void);
 extern void free_initmem(void);
-#ifdef	CONFIG_ACPI
-extern void acpi_early_init(void);
-#else
-static inline void acpi_early_init(void) { }
-#endif
 #ifndef CONFIG_DEBUG_RODATA
 static inline void mark_rodata_ro(void) { }
 #endif