ASoC: add support for multiple jack types

This patch adds soc-jack support for adding voltage zones and for
detecting jack type

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Harsha Priya <priya.harsha@intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

include/sound/soc.h

@@ -234,6 +234,7 @@ struct snd_soc_codec;
 struct snd_soc_codec_driver;
 struct soc_enum;
 struct snd_soc_jack;
+struct snd_soc_jack_zone;
 struct snd_soc_jack_pin;
 struct snd_soc_cache_ops;
 #include <sound/soc-dapm.h>
@@ -307,6 +308,9 @@ void snd_soc_jack_notifier_register(struct snd_soc_jack *jack,
 				    struct notifier_block *nb);
 void snd_soc_jack_notifier_unregister(struct snd_soc_jack *jack,
 				      struct notifier_block *nb);
+int snd_soc_jack_add_zones(struct snd_soc_jack *jack, int count,
+			  struct snd_soc_jack_zone *zones);
+int snd_soc_jack_get_type(struct snd_soc_jack *jack, int micbias_voltage);
 #ifdef CONFIG_GPIOLIB
 int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count,
 			struct snd_soc_jack_gpio *gpios);
@@ -406,6 +410,24 @@ struct snd_soc_jack_pin {
 	bool invert;
 };
 
+/**
+ * struct snd_soc_jack_zone - Describes voltage zones of jack detection
+ *
+ * @min_mv: start voltage in mv
+ * @max_mv: end voltage in mv
+ * @jack_type: type of jack that is expected for this voltage
+ * @debounce_time: debounce_time for jack, codec driver should wait for this
+ *		duration before reading the adc for voltages
+ * @:list: list container
+ */
+struct snd_soc_jack_zone {
+	unsigned int min_mv;
+	unsigned int max_mv;
+	unsigned int jack_type;
+	unsigned int debounce_time;
+	struct list_head list;
+};
+
 /**
  * struct snd_soc_jack_gpio - Describes a gpio pin for jack detection
  *
@@ -435,6 +457,7 @@ struct snd_soc_jack {
 	struct list_head pins;
 	int status;
 	struct blocking_notifier_head notifier;
+	struct list_head jack_zones;
 };
 
 /* SoC PCM stream information */

sound/soc/soc-jack.c

@@ -37,6 +37,7 @@ int snd_soc_jack_new(struct snd_soc_codec *codec, const char *id, int type,
 {
 	jack->codec = codec;
 	INIT_LIST_HEAD(&jack->pins);
+	INIT_LIST_HEAD(&jack->jack_zones);
 	BLOCKING_INIT_NOTIFIER_HEAD(&jack->notifier);
 
 	return snd_jack_new(codec->card->snd_card, id, type, &jack->jack);
@@ -111,6 +112,51 @@ out:
 }
 EXPORT_SYMBOL_GPL(snd_soc_jack_report);
 
+/**
+ * snd_soc_jack_add_zones - Associate voltage zones with jack
+ *
+ * @jack:  ASoC jack
+ * @count: Number of zones
+ * @zone:  Array of zones
+ *
+ * After this function has been called the zones specified in the
+ * array will be associated with the jack.
+ */
+int snd_soc_jack_add_zones(struct snd_soc_jack *jack, int count,
+			  struct snd_soc_jack_zone *zones)
+{
+	int i;
+
+	for (i = 0; i < count; i++) {
+		INIT_LIST_HEAD(&zones[i].list);
+		list_add(&(zones[i].list), &jack->jack_zones);
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(snd_soc_jack_add_zones);
+
+/**
+ * snd_soc_jack_get_type - Based on the mic bias value, this function returns
+ * the type of jack from the zones delcared in the jack type
+ *
+ * @micbias_voltage:  mic bias voltage at adc channel when jack is plugged in
+ *
+ * Based on the mic bias value passed, this function helps identify
+ * the type of jack from the already delcared jack zones
+ */
+int snd_soc_jack_get_type(struct snd_soc_jack *jack, int micbias_voltage)
+{
+	struct snd_soc_jack_zone *zone;
+
+	list_for_each_entry(zone, &jack->jack_zones, list) {
+		if (micbias_voltage >= zone->min_mv &&
+			micbias_voltage < zone->max_mv)
+				return zone->jack_type;
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(snd_soc_jack_get_type);
+
 /**
  * snd_soc_jack_add_pins - Associate DAPM pins with an ASoC jack
  *