Merge branch 'sh/cachetlb' into sh-fixes-for-linus

Documentation/edac.txt

@@ -196,7 +196,7 @@ csrow3.
 The representation of the above is reflected in the directory tree
 in EDAC's sysfs interface. Starting in directory
 /sys/devices/system/edac/mc each memory controller will be represented
-by its own 'mcX' directory, where 'X" is the index of the MC.
+by its own 'mcX' directory, where 'X' is the index of the MC.
 
 
 	..../edac/mc/
@@ -207,7 +207,7 @@ by its own 'mcX' directory, where 'X" is the index of the MC.
 		   ....
 
 Under each 'mcX' directory each 'csrowX' is again represented by a
-'csrowX', where 'X" is the csrow index:
+'csrowX', where 'X' is the csrow index:
 
 
 	.../mc/mc0/
@@ -232,7 +232,7 @@ EDAC control and attribute files.
 
 
 In 'mcX' directories are EDAC control and attribute files for
-this 'X" instance of the memory controllers:
+this 'X' instance of the memory controllers:
 
 
 Counter reset control file:
@@ -343,7 +343,7 @@ Sdram memory scrubbing rate:
 'csrowX' DIRECTORIES
 
 In the 'csrowX' directories are EDAC control and attribute files for
-this 'X" instance of csrow:
+this 'X' instance of csrow:
 
 
 Total Uncorrectable Errors count attribute file:

Documentation/networking/ip-sysctl.txt

@@ -144,6 +144,7 @@ tcp_adv_win_scale - INTEGER
 	Count buffering overhead as bytes/2^tcp_adv_win_scale
 	(if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale),
 	if it is <= 0.
+	Possible values are [-31, 31], inclusive.
 	Default: 2
 
 tcp_allowed_congestion_control - STRING

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 37
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*

arch/arm/configs/at91rm9200_defconfig

@@ -0,0 +1,341 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_MACH_ONEARM=y
+CONFIG_ARCH_AT91RM9200DK=y
+CONFIG_MACH_AT91RM9200EK=y
+CONFIG_MACH_CSB337=y
+CONFIG_MACH_CSB637=y
+CONFIG_MACH_CARMEVA=y
+CONFIG_MACH_ATEB9200=y
+CONFIG_MACH_KB9200=y
+CONFIG_MACH_PICOTUX2XX=y
+CONFIG_MACH_KAFA=y
+CONFIG_MACH_ECBAT91=y
+CONFIG_MACH_YL9200=y
+CONFIG_MACH_CPUAT91=y
+CONFIG_MACH_ECO920=y
+CONFIG_MTD_AT91_DATAFLASH_CARD=y
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=100
+# CONFIG_ARM_THUMB is not set
+CONFIG_PCCARD=y
+CONFIG_AT91_CF=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ZBOOT_ROM_TEXT=0x10000000
+CONFIG_ZBOOT_ROM_BSS=0x20040000
+CONFIG_KEXEC=y
+CONFIG_FPE_NWFPE=y
+CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_AFS_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PLATRAM=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_PLATFORM=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_GLUEBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_ATMEL_TCLIB=y
+CONFIG_EEPROM_LEGACY=m
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_TUN=m
+CONFIG_PHYLIB=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_MICREL_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_ARM_AT91_ETHER=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_EPSON2888=y
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=y
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_GPIO=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+CONFIG_SPI_BITBANG=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HWMON=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=y
+CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+CONFIG_FB_S1D13XXX=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_DISPLAY_SUPPORT=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_MINI_4x6=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_FTDI_SIO=y
+CONFIG_USB_SERIAL_KEYSPAN=y
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_MCT_U232=y
+CONFIG_USB_SERIAL_PL2303=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_MMC=y
+CONFIG_MMC_AT91=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_PCF8563=y
+CONFIG_RTC_DRV_AT91RM9200=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_REISERFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=m
+CONFIG_TMPFS=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RUBIN=y
+CONFIG_CRAMFS=y
+CONFIG_MINIX_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_SMB_FS=m
+CONFIG_CIFS=m
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_FTRACE is not set
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_SHA1=y

arch/arm/configs/at91rm9200dk_defconfig

@@ -1,72 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200DK=y
-CONFIG_MACH_ECO920=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y

arch/arm/configs/at91rm9200ek_defconfig

@@ -1,73 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_AT91RM9200EK=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_S1D13XXX=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y

arch/arm/configs/ateb9200_defconfig

@@ -1,131 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_ATEB9200=y
-CONFIG_PCCARD=m
-CONFIG_AT91_CF=m
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK_RO=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_TUN=m
-CONFIG_PHYLIB=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_GL620A=y
-CONFIG_USB_NET_PLUSB=y
-CONFIG_USB_NET_RNDIS_HOST=y
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_GPIO=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_USB_HID=m
-CONFIG_HID_PID=y
-CONFIG_USB_HIDDEV=y
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_USBAT=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_MMC=m
-CONFIG_MMC_DEBUG=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-CONFIG_REISERFS_FS=m
-CONFIG_INOTIFY=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NTFS_FS=m
-CONFIG_NTFS_RW=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V4=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRC16=m
-CONFIG_LIBCRC32C=m

arch/arm/configs/carmeva_defconfig

@@ -1,47 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_HOTPLUG is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_CARMEVA=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO=m
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_MMC=m
-CONFIG_MMC_DEBUG=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_DNOTIFY is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y

arch/arm/configs/cpuat91_defconfig

@@ -1,112 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_CPUAT91=y
-CONFIG_AT91_TIMER_HZ=100
-# CONFIG_ARM_THUMB is not set
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_AT91=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_PCF8563=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_CRAMFS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set

arch/arm/configs/csb337_defconfig

@@ -1,104 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_CSB337=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_SSC=y
-CONFIG_SCSI=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_CONSOLE=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=y
-CONFIG_USB_SERIAL_KEYSPAN=y
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-CONFIG_USB_SERIAL_MCT_U232=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc1"
-# CONFIG_RTC_INTF_SYSFS is not set
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y

arch/arm/configs/csb637_defconfig

@@ -1,98 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_CSB637=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_CONSOLE=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=y
-CONFIG_USB_SERIAL_KEYSPAN=y
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-CONFIG_USB_SERIAL_MCT_U232=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y

arch/arm/configs/ecbat91_defconfig

@@ -1,99 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_ECBAT91=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_PREEMPT=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="rootfstype=reiserfs root=/dev/mmcblk0p1 console=ttyS0,115200n8 rootdelay=1"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-CONFIG_CFG80211=y
-CONFIG_MAC80211=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_AFS_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_PRINTER=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_AT91=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_REISERFS_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_DEBUG_USER=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_SHA1=y

arch/arm/configs/kafa_defconfig

@@ -1,61 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_KAFA=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PREEMPT=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20800000,10M root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK_RO=y
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y

arch/arm/configs/kb9202_defconfig

@@ -1,127 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_KB9200=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x10000000
-CONFIG_ZBOOT_ROM_BSS=0x20040000
-CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_SSC=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_AT91RM9200_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_LIBUSUAL=y
-CONFIG_MMC=y
-CONFIG_MMC_AT91=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set

arch/arm/configs/onearm_defconfig

@@ -1,80 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_ONEARM=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y

arch/arm/configs/picotux200_defconfig

@@ -1,242 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=m
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_PICOTUX2XX=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=m
-CONFIG_NET=y
-CONFIG_PACKET=m
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_EEPROM_LEGACY=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_NETDEVICES=y
-CONFIG_TUN=m
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-CONFIG_PPP=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_GPIO=m
-CONFIG_HWMON=m
-CONFIG_SENSORS_ADM1021=m
-CONFIG_SENSORS_ADM1025=m
-CONFIG_SENSORS_ADM1026=m
-CONFIG_SENSORS_ADM1029=m
-CONFIG_SENSORS_ADM1031=m
-CONFIG_SENSORS_ADM9240=m
-CONFIG_SENSORS_DS1621=m
-CONFIG_SENSORS_GL518SM=m
-CONFIG_SENSORS_GL520SM=m
-CONFIG_SENSORS_IT87=m
-CONFIG_SENSORS_LM63=m
-CONFIG_SENSORS_LM75=m
-CONFIG_SENSORS_LM77=m
-CONFIG_SENSORS_LM78=m
-CONFIG_SENSORS_LM80=m
-CONFIG_SENSORS_LM83=m
-CONFIG_SENSORS_LM85=m
-CONFIG_SENSORS_LM87=m
-CONFIG_SENSORS_LM90=m
-CONFIG_SENSORS_LM92=m
-CONFIG_SENSORS_MAX1619=m
-CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_SMSC47B397=m
-CONFIG_SENSORS_W83781D=m
-CONFIG_SENSORS_W83791D=m
-CONFIG_SENSORS_W83792D=m
-CONFIG_SENSORS_W83793=m
-CONFIG_SENSORS_W83L785TS=m
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=m
-CONFIG_HID=m
-CONFIG_USB=m
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_MMC=m
-CONFIG_MMC_AT91=m
-CONFIG_RTC_CLASS=m
-CONFIG_RTC_DRV_AT91RM9200=m
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NTFS_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=m
-CONFIG_SMB_FS=m
-CONFIG_CIFS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_AMIGA_PARTITION=y
-CONFIG_NLS_DEFAULT="utf-8"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_LIBCRC32C=m

arch/arm/configs/yl9200_defconfig

@@ -1,137 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200DK=y
-CONFIG_MACH_YL9200=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=3
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_SPI=y
-CONFIG_SPI_DEBUG=y
-CONFIG_SPI_ATMEL=y
-CONFIG_FB=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_M66592=y
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-CONFIG_MMC_AT91=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT3_FS=y
-CONFIG_REISERFS_FS=y
-CONFIG_INOTIFY=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_CRAMFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_SLUB_DEBUG_ON=y
-CONFIG_DEBUG_KOBJECT=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LIST=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y

arch/arm/mach-at91/Makefile

@@ -24,8 +24,8 @@ obj-$(CONFIG_ARCH_AT91X40)	+= at91x40.o at91x40_time.o
 
 # AT91RM9200 board-specific support
 obj-$(CONFIG_MACH_ONEARM)	+= board-1arm.o
-obj-$(CONFIG_ARCH_AT91RM9200DK)	+= board-dk.o
-obj-$(CONFIG_MACH_AT91RM9200EK)	+= board-ek.o
+obj-$(CONFIG_ARCH_AT91RM9200DK)	+= board-rm9200dk.o
+obj-$(CONFIG_MACH_AT91RM9200EK)	+= board-rm9200ek.o
 obj-$(CONFIG_MACH_CSB337)	+= board-csb337.o
 obj-$(CONFIG_MACH_CSB637)	+= board-csb637.o
 obj-$(CONFIG_MACH_CARMEVA)	+= board-carmeva.o

arch/arm/mach-at91/at91rm9200_devices.c

@@ -1106,51 +1106,6 @@ static inline void configure_usart3_pins(unsigned pins)
 static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
 struct platform_device *atmel_default_console_device;	/* the serial console device */
 
-void __init __deprecated at91_init_serial(struct at91_uart_config *config)
-{
-	int i;
-
-	/* Fill in list of supported UARTs */
-	for (i = 0; i < config->nr_tty; i++) {
-		switch (config->tty_map[i]) {
-			case 0:
-				configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
-				at91_uarts[i] = &at91rm9200_uart0_device;
-				at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart");
-				break;
-			case 1:
-				configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
-				at91_uarts[i] = &at91rm9200_uart1_device;
-				at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart");
-				break;
-			case 2:
-				configure_usart2_pins(0);
-				at91_uarts[i] = &at91rm9200_uart2_device;
-				at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart");
-				break;
-			case 3:
-				configure_usart3_pins(0);
-				at91_uarts[i] = &at91rm9200_uart3_device;
-				at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart");
-				break;
-			case 4:
-				configure_dbgu_pins();
-				at91_uarts[i] = &at91rm9200_dbgu_device;
-				at91_clock_associate("mck", &at91rm9200_dbgu_device.dev, "usart");
-				break;
-			default:
-				continue;
-		}
-		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
-	}
-
-	/* Set serial console device */
-	if (config->console_tty < ATMEL_MAX_UART)
-		atmel_default_console_device = at91_uarts[config->console_tty];
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
 	struct platform_device *pdev;

arch/arm/mach-at91/board-1arm.c

@@ -39,24 +39,24 @@
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata onearm_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 3,
-	.tty_map	= { 4, 0, 1, -1, -1 },		/* ttyS0, ..., ttyS4 */
-};
-
 static void __init onearm_map_io(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
 
-	/* Setup the serial ports and console */
-	at91_init_serial(&onearm_uart_config);
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
 }
 
 static void __init onearm_init_irq(void)

arch/arm/mach-at91/board-kafa.c

@@ -39,17 +39,6 @@
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata kafa_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 2,
-	.tty_map	= { 4, 0, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
-};
-
 static void __init kafa_map_io(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
@@ -58,8 +47,14 @@ static void __init kafa_map_io(void)
 	/* Set up the LEDs */
 	at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
 
-	/* Setup the serial ports and console */
-	at91_init_serial(&kafa_uart_config);
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
 }
 
 static void __init kafa_init_irq(void)

arch/arm/mach-at91/board-picotux200.c

@@ -43,24 +43,21 @@
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata picotux200_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 2,
-	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
-};
-
 static void __init picotux200_map_io(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91rm9200_initialize(18432000, AT91RM9200_BGA);
 
-	/* Setup the serial ports and console */
-	at91_init_serial(&picotux200_uart_config);
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			  | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			  | ATMEL_UART_RI);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
 }
 
 static void __init picotux200_init_irq(void)
@@ -77,11 +74,6 @@ static struct at91_usbh_data __initdata picotux200_usbh_data = {
 	.ports		= 1,
 };
 
-// static struct at91_udc_data __initdata picotux200_udc_data = {
-// 	.vbus_pin	= AT91_PIN_PD4,
-// 	.pullup_pin	= AT91_PIN_PD5,
-// };
-
 static struct at91_mmc_data __initdata picotux200_mmc_data = {
 	.det_pin	= AT91_PIN_PB27,
 	.slot_b		= 0,
@@ -89,21 +81,6 @@ static struct at91_mmc_data __initdata picotux200_mmc_data = {
 	.wp_pin		= AT91_PIN_PA17,
 };
 
-// static struct spi_board_info picotux200_spi_devices[] = {
-// 	{	/* DataFlash chip */
-// 		.modalias	= "mtd_dataflash",
-// 		.chip_select	= 0,
-// 		.max_speed_hz	= 15 * 1000 * 1000,
-// 	},
-// #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-// 	{	/* DataFlash card */
-// 		.modalias	= "mtd_dataflash",
-// 		.chip_select	= 3,
-// 		.max_speed_hz	= 15 * 1000 * 1000,
-// 	},
-// #endif
-// };
-
 #define PICOTUX200_FLASH_BASE	AT91_CHIPSELECT_0
 #define PICOTUX200_FLASH_SIZE	SZ_4M
 
@@ -135,21 +112,11 @@ static void __init picotux200_board_init(void)
 	at91_add_device_eth(&picotux200_eth_data);
 	/* USB Host */
 	at91_add_device_usbh(&picotux200_usbh_data);
-	/* USB Device */
-	// at91_add_device_udc(&picotux200_udc_data);
-	// at91_set_multi_drive(picotux200_udc_data.pullup_pin, 1);	/* pullup_pin is connected to reset */
 	/* I2C */
 	at91_add_device_i2c(NULL, 0);
-	/* SPI */
-	// at91_add_device_spi(picotux200_spi_devices, ARRAY_SIZE(picotux200_spi_devices));
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-	/* DataFlash card */
-	at91_set_gpio_output(AT91_PIN_PB22, 0);
-#else
 	/* MMC */
 	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
 	at91_add_device_mmc(0, &picotux200_mmc_data);
-#endif
 	/* NOR Flash */
 	platform_device_register(&picotux200_flash);
 }

arch/arm/mach-at91/board-dk.c → arch/arm/mach-at91/board-rm9200dk.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91/board-dk.c
+ * linux/arch/arm/mach-at91/board-rm9200dk.c
  *
  *  Copyright (C) 2005 SAN People
  *
@@ -91,10 +91,12 @@ static struct at91_cf_data __initdata dk_cf_data = {
 	// .vcc_pin	= ... always powered
 };
 
+#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
 static struct at91_mmc_data __initdata dk_mmc_data = {
 	.slot_b		= 0,
 	.wire4		= 1,
 };
+#endif
 
 static struct spi_board_info dk_spi_devices[] = {
 	{	/* DataFlash chip */

arch/arm/mach-at91/board-ek.c → arch/arm/mach-at91/board-rm9200ek.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91/board-ek.c
+ * linux/arch/arm/mach-at91/board-rm9200ek.c
  *
  *  Copyright (C) 2005 SAN People
  *
@@ -84,12 +84,14 @@ static struct at91_udc_data __initdata ek_udc_data = {
 	.pullup_pin	= AT91_PIN_PD5,
 };
 
+#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
 static struct at91_mmc_data __initdata ek_mmc_data = {
 	.det_pin	= AT91_PIN_PB27,
 	.slot_b		= 0,
 	.wire4		= 1,
 	.wp_pin		= AT91_PIN_PA17,
 };
+#endif
 
 static struct spi_board_info ek_spi_devices[] = {
 	{	/* DataFlash chip */

arch/arm/mach-at91/board-yl-9200.c

@@ -387,7 +387,7 @@ static struct spi_board_info yl9200_spi_devices[] = {
  * EPSON S1D13806 FB (discontinued chip)
  * EPSON S1D13506 FB
  */
-#if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE)
+#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
 #include <video/s1d13xxxfb.h>
 
 

arch/arm/mach-at91/include/mach/board.h

@@ -137,13 +137,7 @@ extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_de
 extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
 extern void __init at91_set_serial_console(unsigned portnr);
 
-struct at91_uart_config {
-	unsigned short	console_tty;	/* tty number of serial console */
-	unsigned short	nr_tty;		/* number of serial tty's */
-	short		tty_map[];	/* map UART to tty number */
-};
 extern struct platform_device *atmel_default_console_device;
-extern void __init __deprecated at91_init_serial(struct at91_uart_config *config);
 
 struct atmel_uart_data {
 	short			use_dma_tx;	/* use transmit DMA? */

arch/arm/mach-omap2/pm24xx.c

@@ -30,6 +30,7 @@
 #include <linux/irq.h>
 #include <linux/time.h>
 #include <linux/gpio.h>
+#include <linux/console.h>
 
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
@@ -118,6 +119,10 @@ static void omap2_enter_full_retention(void)
 	if (omap_irq_pending())
 		goto no_sleep;
 
+	/* Block console output in case it is on one of the OMAP UARTs */
+	if (try_acquire_console_sem())
+		goto no_sleep;
+
 	omap_uart_prepare_idle(0);
 	omap_uart_prepare_idle(1);
 	omap_uart_prepare_idle(2);
@@ -131,6 +136,8 @@ static void omap2_enter_full_retention(void)
 	omap_uart_resume_idle(1);
 	omap_uart_resume_idle(0);
 
+	release_console_sem();
+
 no_sleep:
 	if (omap2_pm_debug) {
 		unsigned long long tmp;

arch/arm/mach-omap2/pm34xx.c

@@ -28,6 +28,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/console.h>
 
 #include <plat/sram.h>
 #include <plat/clockdomain.h>
@@ -385,6 +386,12 @@ void omap_sram_idle(void)
 		omap3_enable_io_chain();
 	}
 
+	/* Block console output in case it is on one of the OMAP UARTs */
+	if (per_next_state < PWRDM_POWER_ON ||
+	    core_next_state < PWRDM_POWER_ON)
+		if (try_acquire_console_sem())
+			goto console_still_active;
+
 	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
 		omap_uart_prepare_idle(2);
@@ -463,6 +470,9 @@ void omap_sram_idle(void)
 		omap_uart_resume_idle(3);
 	}
 
+	release_console_sem();
+
+console_still_active:
 	/* Disable IO-PAD and IO-CHAIN wakeup */
 	if (omap3_has_io_wakeup() &&
 	    (per_next_state < PWRDM_POWER_ON ||

arch/arm/mach-omap2/serial.c

@@ -27,6 +27,7 @@
 #include <linux/slab.h>
 #include <linux/serial_8250.h>
 #include <linux/pm_runtime.h>
+#include <linux/console.h>
 
 #ifdef CONFIG_SERIAL_OMAP
 #include <plat/omap-serial.h>
@@ -406,7 +407,7 @@ void omap_uart_resume_idle(int num)
 	struct omap_uart_state *uart;
 
 	list_for_each_entry(uart, &uart_list, node) {
-		if (num == uart->num) {
+		if (num == uart->num && uart->can_sleep) {
 			omap_uart_enable_clocks(uart);
 
 			/* Check for IO pad wakeup */
@@ -807,6 +808,8 @@ void __init omap_serial_init_port(int port)
 
 	oh->dev_attr = uart;
 
+	acquire_console_sem(); /* in case the earlycon is on the UART */
+
 	/*
 	 * Because of early UART probing, UART did not get idled
 	 * on init.  Now that omap_device is ready, ensure full idle
@@ -831,6 +834,8 @@ void __init omap_serial_init_port(int port)
 	omap_uart_block_sleep(uart);
 	uart->timeout = DEFAULT_TIMEOUT;
 
+	release_console_sem();
+
 	if ((cpu_is_omap34xx() && uart->padconf) ||
 	    (uart->wk_en && uart->wk_mask)) {
 		device_init_wakeup(&od->pdev.dev, true);

arch/arm/mach-s3c2410/h1940-bluetooth.c

@@ -77,13 +77,13 @@ static int __devinit h1940bt_probe(struct platform_device *pdev)
 
 	/* Configures BT serial port GPIOs */
 	s3c_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
-	s3c_gpio_cfgpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
 	s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
-	s3c_gpio_cfgpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
 	s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
-	s3c_gpio_cfgpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
 	s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
-	s3c_gpio_cfgpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
 
 
 	rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH,

arch/arm/mach-s3c2416/irq.c

@@ -168,12 +168,11 @@ static struct irq_chip s3c2416_irq_dma = {
 
 static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
 {
-	s3c2416_irq_demux(IRQ_S3C2443_UART3, 3);
+	s3c2416_irq_demux(IRQ_S3C2443_RX3, 3);
 }
 
 #define INTMSK_UART3	(1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
-#define SUBMSK_UART3	(0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
-
+#define SUBMSK_UART3	(0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
 
 static void s3c2416_irq_uart3_mask(unsigned int irqno)
 {

arch/arm/mach-s3c2443/irq.c

@@ -166,12 +166,11 @@ static struct irq_chip s3c2443_irq_dma = {
 
 static void s3c2443_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
 {
-	s3c2443_irq_demux(IRQ_S3C2443_UART3, 3);
+	s3c2443_irq_demux(IRQ_S3C2443_RX3, 3);
 }
 
 #define INTMSK_UART3	(1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
-#define SUBMSK_UART3	(0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
-
+#define SUBMSK_UART3	(0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
 
 static void s3c2443_irq_uart3_mask(unsigned int irqno)
 {

arch/arm/mach-s3c64xx/mach-mini6410.c

@@ -45,7 +45,7 @@
 
 #include <video/platform_lcd.h>
 
-#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define UCON S3C2410_UCON_DEFAULT
 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
 #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
 

arch/arm/mach-s3c64xx/mach-real6410.c

@@ -46,7 +46,7 @@
 
 #include <video/platform_lcd.h>
 
-#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define UCON S3C2410_UCON_DEFAULT
 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
 #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
 

arch/arm/mach-s5pv210/mach-smdkc110.c

@@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/serial_core.h>
 #include <linux/i2c.h>
+#include <linux/sysdev.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

arch/arm/mach-s5pv210/mach-smdkv210.c

@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/sysdev.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

arch/arm/mach-shmobile/board-ap4evb.c

@@ -567,38 +567,127 @@ static struct platform_device *qhd_devices[] __initdata = {
 
 /* FSI */
 #define IRQ_FSI		evt2irq(0x1840)
+static int __fsi_set_rate(struct clk *clk, long rate, int enable)
+{
+	int ret = 0;
+
+	if (rate <= 0)
+		return ret;
+
+	if (enable) {
+		ret = clk_set_rate(clk, rate);
+		if (0 == ret)
+			ret = clk_enable(clk);
+	} else {
+		clk_disable(clk);
+	}
+
+	return ret;
+}
+
+static int __fsi_set_round_rate(struct clk *clk, long rate, int enable)
+{
+	return __fsi_set_rate(clk, clk_round_rate(clk, rate), enable);
+}
 
-static int fsi_set_rate(int is_porta, int rate)
+static int fsi_ak4642_set_rate(struct device *dev, int rate, int enable)
+{
+	struct clk *fsia_ick;
+	struct clk *fsiack;
+	int ret = -EIO;
+
+	fsia_ick = clk_get(dev, "icka");
+	if (IS_ERR(fsia_ick))
+		return PTR_ERR(fsia_ick);
+
+	/*
+	 * FSIACK is connected to AK4642,
+	 * and use external clock pin from it.
+	 * it is parent of fsia_ick now.
+	 */
+	fsiack = clk_get_parent(fsia_ick);
+	if (!fsiack)
+		goto fsia_ick_out;
+
+	/*
+	 * we get 1/1 divided clock by setting same rate to fsiack and fsia_ick
+	 *
+	 ** FIXME **
+	 * Because the freq_table of external clk (fsiack) are all 0,
+	 * the return value of clk_round_rate became 0.
+	 * So, it use __fsi_set_rate here.
+	 */
+	ret = __fsi_set_rate(fsiack, rate, enable);
+	if (ret < 0)
+		goto fsiack_out;
+
+	ret = __fsi_set_round_rate(fsia_ick, rate, enable);
+	if ((ret < 0) && enable)
+		__fsi_set_round_rate(fsiack, rate, 0); /* disable FSI ACK */
+
+fsiack_out:
+	clk_put(fsiack);
+
+fsia_ick_out:
+	clk_put(fsia_ick);
+
+	return 0;
+}
+
+static int fsi_hdmi_set_rate(struct device *dev, int rate, int enable)
 {
 	struct clk *fsib_clk;
 	struct clk *fdiv_clk = &sh7372_fsidivb_clk;
+	long fsib_rate = 0;
+	long fdiv_rate = 0;
+	int ackmd_bpfmd;
 	int ret;
 
-	/* set_rate is not needed if port A */
-	if (is_porta)
-		return 0;
-
-	fsib_clk = clk_get(NULL, "fsib_clk");
-	if (IS_ERR(fsib_clk))
-		return -EINVAL;
-
 	switch (rate) {
 	case 44100:
-		clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 11283000));
-		ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+		fsib_rate	= rate * 256;
+		ackmd_bpfmd	= SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
 		break;
 	case 48000:
-		clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 85428000));
-		clk_set_rate(fdiv_clk, clk_round_rate(fdiv_clk, 12204000));
-		ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+		fsib_rate	= 85428000; /* around 48kHz x 256 x 7 */
+		fdiv_rate	= rate * 256;
+		ackmd_bpfmd	= SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
 		break;
 	default:
 		pr_err("unsupported rate in FSI2 port B\n");
-		ret = -EINVAL;
-		break;
+		return -EINVAL;
 	}
 
+	/* FSI B setting */
+	fsib_clk = clk_get(dev, "ickb");
+	if (IS_ERR(fsib_clk))
+		return -EIO;
+
+	ret = __fsi_set_round_rate(fsib_clk, fsib_rate, enable);
 	clk_put(fsib_clk);
+	if (ret < 0)
+		return ret;
+
+	/* FSI DIV setting */
+	ret = __fsi_set_round_rate(fdiv_clk, fdiv_rate, enable);
+	if (ret < 0) {
+		/* disable FSI B */
+		if (enable)
+			__fsi_set_round_rate(fsib_clk, fsib_rate, 0);
+		return ret;
+	}
+
+	return ackmd_bpfmd;
+}
+
+static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable)
+{
+	int ret;
+
+	if (is_porta)
+		ret = fsi_ak4642_set_rate(dev, rate, enable);
+	else
+		ret = fsi_hdmi_set_rate(dev, rate, enable);
 
 	return ret;
 }
@@ -880,6 +969,11 @@ static int __init hdmi_init_pm_clock(void)
 		goto out;
 	}
 
+	ret = clk_enable(&sh7372_pllc2_clk);
+	if (ret < 0) {
+		pr_err("Cannot enable pllc2 clock\n");
+		goto out;
+	}
 	pr_debug("PLLC2 set frequency %lu\n", rate);
 
 	ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
@@ -896,23 +990,11 @@ out:
 
 device_initcall(hdmi_init_pm_clock);
 
-#define FSIACK_DUMMY_RATE 48000
 static int __init fsi_init_pm_clock(void)
 {
 	struct clk *fsia_ick;
 	int ret;
 
-	/*
-	 * FSIACK is connected to AK4642,
-	 * and the rate is depend on playing sound rate.
-	 * So, set dummy rate (= 48k) here
-	 */
-	ret = clk_set_rate(&sh7372_fsiack_clk, FSIACK_DUMMY_RATE);
-	if (ret < 0) {
-		pr_err("Cannot set FSIACK dummy rate: %d\n", ret);
-		return ret;
-	}
-
 	fsia_ick = clk_get(&fsi_device.dev, "icka");
 	if (IS_ERR(fsia_ick)) {
 		ret = PTR_ERR(fsia_ick);
@@ -921,16 +1003,9 @@ static int __init fsi_init_pm_clock(void)
 	}
 
 	ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk);
-	if (ret < 0) {
-		pr_err("Cannot set FSI-A parent: %d\n", ret);
-		goto out;
-	}
-
-	ret = clk_set_rate(fsia_ick, FSIACK_DUMMY_RATE);
 	if (ret < 0)
-		pr_err("Cannot set FSI-A rate: %d\n", ret);
+		pr_err("Cannot set FSI-A parent: %d\n", ret);
 
-out:
 	clk_put(fsia_ick);
 
 	return ret;

arch/arm/mach-shmobile/clock-sh7372.c

@@ -229,21 +229,13 @@ static int pllc2_set_rate(struct clk *clk, unsigned long rate)
 	if (idx < 0)
 		return idx;
 
-	if (rate == clk->parent->rate) {
-		pllc2_disable(clk);
-		return 0;
-	}
+	if (rate == clk->parent->rate)
+		return -EINVAL;
 
 	value = __raw_readl(PLLC2CR) & ~(0x3f << 24);
 
-	if (value & 0x80000000)
-		pllc2_disable(clk);
-
 	__raw_writel((value & ~0x80000000) | ((idx + 19) << 24), PLLC2CR);
 
-	if (value & 0x80000000)
-		return pllc2_enable(clk);
-
 	return 0;
 }
 
@@ -452,10 +444,8 @@ static int fsidiv_enable(struct clk *clk)
 	unsigned long value;
 
 	value  = __raw_readl(clk->mapping->base) >> 16;
-	if (value < 2) {
-		fsidiv_disable(clk);
-		return -ENOENT;
-	}
+	if (value < 2)
+		return -EIO;
 
 	__raw_writel((value << 16) | 0x3, clk->mapping->base);
 
@@ -466,17 +456,12 @@ static int fsidiv_set_rate(struct clk *clk, unsigned long rate)
 {
 	int idx;
 
-	if (clk->parent->rate == rate) {
-		fsidiv_disable(clk);
-		return 0;
-	}
-
 	idx = (clk->parent->rate / rate) & 0xffff;
 	if (idx < 2)
-		return -ENOENT;
+		return -EINVAL;
 
 	__raw_writel(idx << 16, clk->mapping->base);
-	return fsidiv_enable(clk);
+	return 0;
 }
 
 static struct clk_ops fsidiv_clk_ops = {
@@ -607,8 +592,6 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
 	CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]),
 	CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]),
-	CLKDEV_CON_ID("fsia_clk", &div6_reparent_clks[DIV6_FSIA]),
-	CLKDEV_CON_ID("fsib_clk", &div6_reparent_clks[DIV6_FSIB]),
 	CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]),
 	CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]),
 	CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]),
@@ -645,8 +628,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
 	CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */
-	CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP323]), /* USB0 */
-	CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP323]), /* USB0 */
+	CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */
+	CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USB0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
 	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMC */

arch/arm/plat-pxa/include/plat/sdhci.h

@@ -17,6 +17,9 @@
 /* Require clock free running */
 #define PXA_FLAG_DISABLE_CLOCK_GATING (1<<0)
 
+/* Board design supports 8-bit data on SD/SDIO BUS */
+#define PXA_FLAG_SD_8_BIT_CAPABLE_SLOT (1<<2)
+
 /*
  * struct pxa_sdhci_platdata() - Platform device data for PXA SDHCI
  * @max_speed: the maximum speed supported

arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c

@@ -29,8 +29,8 @@ void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
 	} else {
 		s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT);
 		s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT);
-		s3c_gpio_cfgpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE);
-		s3c_gpio_cfgpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE);
-		s3c_gpio_cfgpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE);
 	}
 }

arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c

@@ -31,8 +31,8 @@ void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
 	} else {
 		s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT);
 		s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT);
-		s3c_gpio_cfgpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE);
-		s3c_gpio_cfgpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
-		s3c_gpio_cfgpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
 	}
 }

arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c

@@ -29,8 +29,8 @@ void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
 	} else {
 		s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT);
 		s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT);
-		s3c_gpio_cfgpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE);
-		s3c_gpio_cfgpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
-		s3c_gpio_cfgpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE);
 	}
 }

arch/powerpc/mm/pgtable.c

@@ -92,7 +92,7 @@ static void pte_free_rcu_callback(struct rcu_head *head)
 
 static void pte_free_submit(struct pte_freelist_batch *batch)
 {
-	call_rcu(&batch->rcu, pte_free_rcu_callback);
+	call_rcu_sched(&batch->rcu, pte_free_rcu_callback);
 }
 
 void pgtable_free_tlb(struct mmu_gather *tlb, void *table, unsigned shift)

arch/s390/kernel/nmi.c

@@ -95,7 +95,6 @@ EXPORT_SYMBOL_GPL(s390_handle_mcck);
 static int notrace s390_revalidate_registers(struct mci *mci)
 {
 	int kill_task;
-	u64 tmpclock;
 	u64 zero;
 	void *fpt_save_area, *fpt_creg_save_area;
 
@@ -214,11 +213,10 @@ static int notrace s390_revalidate_registers(struct mci *mci)
 			: "0", "cc");
 #endif
 	/* Revalidate clock comparator register */
-	asm volatile(
-		"	stck	0(%1)\n"
-		"	sckc	0(%1)"
-		: "=m" (tmpclock) : "a" (&(tmpclock)) : "cc", "memory");
-
+	if (S390_lowcore.clock_comparator == -1)
+		set_clock_comparator(S390_lowcore.mcck_clock);
+	else
+		set_clock_comparator(S390_lowcore.clock_comparator);
 	/* Check if old PSW is valid */
 	if (!mci->wp)
 		/*

arch/s390/lib/delay.c

@@ -29,17 +29,21 @@ static void __udelay_disabled(unsigned long long usecs)
 {
 	unsigned long mask, cr0, cr0_saved;
 	u64 clock_saved;
+	u64 end;
 
+	mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT;
+	end = get_clock() + (usecs << 12);
 	clock_saved = local_tick_disable();
-	set_clock_comparator(get_clock() + (usecs << 12));
 	__ctl_store(cr0_saved, 0, 0);
 	cr0 = (cr0_saved & 0xffff00e0) | 0x00000800;
 	__ctl_load(cr0 , 0, 0);
-	mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT;
 	lockdep_off();
-	trace_hardirqs_on();
-	__load_psw_mask(mask);
-	local_irq_disable();
+	do {
+		set_clock_comparator(end);
+		trace_hardirqs_on();
+		__load_psw_mask(mask);
+		local_irq_disable();
+	} while (get_clock() < end);
 	lockdep_on();
 	__ctl_load(cr0_saved, 0, 0);
 	local_tick_enable(clock_saved);

arch/sh/include/asm/cacheflush.h

@@ -96,7 +96,7 @@ void kmap_coherent_init(void);
 void *kmap_coherent(struct page *page, unsigned long addr);
 void kunmap_coherent(void *kvaddr);
 
-#define PG_dcache_dirty	PG_arch_1
+#define PG_dcache_clean	PG_arch_1
 
 void cpu_cache_init(void);
 

arch/sh/mm/cache-sh4.c

@@ -114,7 +114,7 @@ static void sh4_flush_dcache_page(void *arg)
 	struct address_space *mapping = page_mapping(page);
 
 	if (mapping && !mapping_mapped(mapping))
-		set_bit(PG_dcache_dirty, &page->flags);
+		clear_bit(PG_dcache_clean, &page->flags);
 	else
 #endif
 		flush_cache_one(CACHE_OC_ADDRESS_ARRAY |
@@ -239,7 +239,7 @@ static void sh4_flush_cache_page(void *args)
 		 * another ASID than the current one.
 		 */
 		map_coherent = (current_cpu_data.dcache.n_aliases &&
-			!test_bit(PG_dcache_dirty, &page->flags) &&
+			test_bit(PG_dcache_clean, &page->flags) &&
 			page_mapped(page));
 		if (map_coherent)
 			vaddr = kmap_coherent(page, address);

arch/sh/mm/cache-sh7705.c

@@ -139,7 +139,7 @@ static void sh7705_flush_dcache_page(void *arg)
 	struct address_space *mapping = page_mapping(page);
 
 	if (mapping && !mapping_mapped(mapping))
-		set_bit(PG_dcache_dirty, &page->flags);
+		clear_bit(PG_dcache_clean, &page->flags);
 	else
 		__flush_dcache_page(__pa(page_address(page)));
 }

arch/sh/mm/cache.c

@@ -60,14 +60,14 @@ void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
 		       unsigned long len)
 {
 	if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
-	    !test_bit(PG_dcache_dirty, &page->flags)) {
+	    test_bit(PG_dcache_clean, &page->flags)) {
 		void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
 		memcpy(vto, src, len);
 		kunmap_coherent(vto);
 	} else {
 		memcpy(dst, src, len);
 		if (boot_cpu_data.dcache.n_aliases)
-			set_bit(PG_dcache_dirty, &page->flags);
+			clear_bit(PG_dcache_clean, &page->flags);
 	}
 
 	if (vma->vm_flags & VM_EXEC)
@@ -79,14 +79,14 @@ void copy_from_user_page(struct vm_area_struct *vma, struct page *page,
 			 unsigned long len)
 {
 	if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
-	    !test_bit(PG_dcache_dirty, &page->flags)) {
+	    test_bit(PG_dcache_clean, &page->flags)) {
 		void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
 		memcpy(dst, vfrom, len);
 		kunmap_coherent(vfrom);
 	} else {
 		memcpy(dst, src, len);
 		if (boot_cpu_data.dcache.n_aliases)
-			set_bit(PG_dcache_dirty, &page->flags);
+			clear_bit(PG_dcache_clean, &page->flags);
 	}
 }
 
@@ -98,7 +98,7 @@ void copy_user_highpage(struct page *to, struct page *from,
 	vto = kmap_atomic(to, KM_USER1);
 
 	if (boot_cpu_data.dcache.n_aliases && page_mapped(from) &&
-	    !test_bit(PG_dcache_dirty, &from->flags)) {
+	    test_bit(PG_dcache_clean, &from->flags)) {
 		vfrom = kmap_coherent(from, vaddr);
 		copy_page(vto, vfrom);
 		kunmap_coherent(vfrom);
@@ -141,7 +141,7 @@ void __update_cache(struct vm_area_struct *vma,
 
 	page = pfn_to_page(pfn);
 	if (pfn_valid(pfn)) {
-		int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
+		int dirty = !test_and_set_bit(PG_dcache_clean, &page->flags);
 		if (dirty)
 			__flush_purge_region(page_address(page), PAGE_SIZE);
 	}
@@ -153,7 +153,7 @@ void __flush_anon_page(struct page *page, unsigned long vmaddr)
 
 	if (pages_do_alias(addr, vmaddr)) {
 		if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
-		    !test_bit(PG_dcache_dirty, &page->flags)) {
+		    test_bit(PG_dcache_clean, &page->flags)) {
 			void *kaddr;
 
 			kaddr = kmap_coherent(page, vmaddr);

arch/sh/mm/kmap.c

@@ -34,7 +34,7 @@ void *kmap_coherent(struct page *page, unsigned long addr)
 	enum fixed_addresses idx;
 	unsigned long vaddr;
 
-	BUG_ON(test_bit(PG_dcache_dirty, &page->flags));
+	BUG_ON(!test_bit(PG_dcache_clean, &page->flags));
 
 	pagefault_disable();
 

arch/x86/Kconfig

@@ -21,7 +21,7 @@ config X86
 	select HAVE_UNSTABLE_SCHED_CLOCK
 	select HAVE_IDE
 	select HAVE_OPROFILE
-	select HAVE_PERF_EVENTS if (!M386 && !M486)
+	select HAVE_PERF_EVENTS
 	select HAVE_IRQ_WORK
 	select HAVE_IOREMAP_PROT
 	select HAVE_KPROBES

arch/x86/include/asm/msr-index.h

@@ -128,7 +128,7 @@
 #define FAM10H_MMIO_CONF_ENABLE		(1<<0)
 #define FAM10H_MMIO_CONF_BUSRANGE_MASK	0xf
 #define FAM10H_MMIO_CONF_BUSRANGE_SHIFT 2
-#define FAM10H_MMIO_CONF_BASE_MASK	0xfffffff
+#define FAM10H_MMIO_CONF_BASE_MASK	0xfffffffULL
 #define FAM10H_MMIO_CONF_BASE_SHIFT	20
 #define MSR_FAM10H_NODE_ID		0xc001100c
 

arch/x86/include/asm/paravirt.h

@@ -824,27 +824,27 @@ static __always_inline void arch_spin_unlock(struct arch_spinlock *lock)
 #define __PV_IS_CALLEE_SAVE(func)			\
 	((struct paravirt_callee_save) { func })
 
-static inline unsigned long arch_local_save_flags(void)
+static inline notrace unsigned long arch_local_save_flags(void)
 {
 	return PVOP_CALLEE0(unsigned long, pv_irq_ops.save_fl);
 }
 
-static inline void arch_local_irq_restore(unsigned long f)
+static inline notrace void arch_local_irq_restore(unsigned long f)
 {
 	PVOP_VCALLEE1(pv_irq_ops.restore_fl, f);
 }
 
-static inline void arch_local_irq_disable(void)
+static inline notrace void arch_local_irq_disable(void)
 {
 	PVOP_VCALLEE0(pv_irq_ops.irq_disable);
 }
 
-static inline void arch_local_irq_enable(void)
+static inline notrace void arch_local_irq_enable(void)
 {
 	PVOP_VCALLEE0(pv_irq_ops.irq_enable);
 }
 
-static inline unsigned long arch_local_irq_save(void)
+static inline notrace unsigned long arch_local_irq_save(void)
 {
 	unsigned long f;
 

arch/x86/include/asm/uv/uv_hub.h

@@ -199,6 +199,8 @@ union uvh_apicid {
 #define UVH_APICID		0x002D0E00L
 #define UV_APIC_PNODE_SHIFT	6
 
+#define UV_APICID_HIBIT_MASK	0xffff0000
+
 /* Local Bus from cpu's perspective */
 #define LOCAL_BUS_BASE		0x1c00000
 #define LOCAL_BUS_SIZE		(4 * 1024 * 1024)
@@ -491,8 +493,10 @@ static inline void uv_set_cpu_scir_bits(int cpu, unsigned char value)
 	}
 }
 
+extern unsigned int uv_apicid_hibits;
 static unsigned long uv_hub_ipi_value(int apicid, int vector, int mode)
 {
+	apicid |= uv_apicid_hibits;
 	return (1UL << UVH_IPI_INT_SEND_SHFT) |
 			((apicid) << UVH_IPI_INT_APIC_ID_SHFT) |
 			(mode << UVH_IPI_INT_DELIVERY_MODE_SHFT) |

arch/x86/include/asm/uv/uv_mmrs.h

@@ -5,7 +5,7 @@
  *
  * SGI UV MMR definitions
  *
- * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 2007-2010 Silicon Graphics, Inc. All rights reserved.
  */
 
 #ifndef _ASM_X86_UV_UV_MMRS_H
@@ -753,6 +753,23 @@ union uvh_lb_bau_sb_descriptor_base_u {
     } s;
 };
 
+/* ========================================================================= */
+/*                   UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK                     */
+/* ========================================================================= */
+#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK 0x320130UL
+#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK_32 0x009f0
+
+#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK_BIT_ENABLES_SHFT 0
+#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK_BIT_ENABLES_MASK 0x00000000ffffffffUL
+
+union uvh_lb_target_physical_apic_id_mask_u {
+	unsigned long v;
+	struct uvh_lb_target_physical_apic_id_mask_s {
+		unsigned long bit_enables : 32;  /* RW */
+		unsigned long rsvd_32_63  : 32;  /*    */
+	} s;
+};
+
 /* ========================================================================= */
 /*                               UVH_NODE_ID                                 */
 /* ========================================================================= */

arch/x86/kernel/apic/hw_nmi.c

@@ -17,15 +17,16 @@
 #include <linux/nmi.h>
 #include <linux/module.h>
 
-/* For reliability, we're prepared to waste bits here. */
-static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly;
-
 u64 hw_nmi_get_sample_period(void)
 {
 	return (u64)(cpu_khz) * 1000 * 60;
 }
 
 #ifdef ARCH_HAS_NMI_WATCHDOG
+
+/* For reliability, we're prepared to waste bits here. */
+static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly;
+
 void arch_trigger_all_cpu_backtrace(void)
 {
 	int i;

arch/x86/kernel/apic/x2apic_uv_x.c

@@ -44,6 +44,8 @@ static u64 gru_start_paddr, gru_end_paddr;
 static union uvh_apicid uvh_apicid;
 int uv_min_hub_revision_id;
 EXPORT_SYMBOL_GPL(uv_min_hub_revision_id);
+unsigned int uv_apicid_hibits;
+EXPORT_SYMBOL_GPL(uv_apicid_hibits);
 static DEFINE_SPINLOCK(uv_nmi_lock);
 
 static inline bool is_GRU_range(u64 start, u64 end)
@@ -85,6 +87,23 @@ static void __init early_get_apic_pnode_shift(void)
 		uvh_apicid.s.pnode_shift = UV_APIC_PNODE_SHIFT;
 }
 
+/*
+ * Add an extra bit as dictated by bios to the destination apicid of
+ * interrupts potentially passing through the UV HUB.  This prevents
+ * a deadlock between interrupts and IO port operations.
+ */
+static void __init uv_set_apicid_hibit(void)
+{
+	union uvh_lb_target_physical_apic_id_mask_u apicid_mask;
+	unsigned long *mmr;
+
+	mmr = early_ioremap(UV_LOCAL_MMR_BASE |
+		UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK, sizeof(*mmr));
+	apicid_mask.v = *mmr;
+	early_iounmap(mmr, sizeof(*mmr));
+	uv_apicid_hibits = apicid_mask.s.bit_enables & UV_APICID_HIBIT_MASK;
+}
+
 static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	int nodeid;
@@ -102,6 +121,7 @@ static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 			__get_cpu_var(x2apic_extra_bits) =
 				nodeid << (uvh_apicid.s.pnode_shift - 1);
 			uv_system_type = UV_NON_UNIQUE_APIC;
+			uv_set_apicid_hibit();
 			return 1;
 		}
 	}
@@ -155,6 +175,7 @@ static int __cpuinit uv_wakeup_secondary(int phys_apicid, unsigned long start_ri
 	int pnode;
 
 	pnode = uv_apicid_to_pnode(phys_apicid);
+	phys_apicid |= uv_apicid_hibits;
 	val = (1UL << UVH_IPI_INT_SEND_SHFT) |
 	    (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) |
 	    ((start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) |
@@ -236,7 +257,7 @@ static unsigned int uv_cpu_mask_to_apicid(const struct cpumask *cpumask)
 	int cpu = cpumask_first(cpumask);
 
 	if ((unsigned)cpu < nr_cpu_ids)
-		return per_cpu(x86_cpu_to_apicid, cpu);
+		return per_cpu(x86_cpu_to_apicid, cpu) | uv_apicid_hibits;
 	else
 		return BAD_APICID;
 }
@@ -255,7 +276,7 @@ uv_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
 		if (cpumask_test_cpu(cpu, cpu_online_mask))
 			break;
 	}
-	return per_cpu(x86_cpu_to_apicid, cpu);
+	return per_cpu(x86_cpu_to_apicid, cpu) | uv_apicid_hibits;
 }
 
 static unsigned int x2apic_get_apic_id(unsigned long x)

arch/x86/kernel/cpu/perf_event.c

@@ -381,6 +381,20 @@ static void release_pmc_hardware(void) {}
 
 #endif
 
+static bool check_hw_exists(void)
+{
+	u64 val, val_new = 0;
+	int ret = 0;
+
+	val = 0xabcdUL;
+	ret |= checking_wrmsrl(x86_pmu.perfctr, val);
+	ret |= rdmsrl_safe(x86_pmu.perfctr, &val_new);
+	if (ret || val != val_new)
+		return false;
+
+	return true;
+}
+
 static void reserve_ds_buffers(void);
 static void release_ds_buffers(void);
 
@@ -1372,6 +1386,12 @@ void __init init_hw_perf_events(void)
 
 	pmu_check_apic();
 
+	/* sanity check that the hardware exists or is emulated */
+	if (!check_hw_exists()) {
+		pr_cont("Broken PMU hardware detected, software events only.\n");
+		return;
+	}
+
 	pr_cont("%s PMU driver.\n", x86_pmu.name);
 
 	if (x86_pmu.quirks)

arch/x86/kernel/entry_32.S

@@ -395,7 +395,7 @@ sysenter_past_esp:
 	 * A tiny bit of offset fixup is necessary - 4*4 means the 4 words
 	 * pushed above; +8 corresponds to copy_thread's esp0 setting.
 	 */
-	pushl_cfi (TI_sysenter_return-THREAD_SIZE_asm+8+4*4)(%esp)
+	pushl_cfi ((TI_sysenter_return)-THREAD_SIZE_asm+8+4*4)(%esp)
 	CFI_REL_OFFSET eip, 0
 
 	pushl_cfi %eax

arch/x86/kernel/entry_64.S

@@ -295,6 +295,7 @@ ENDPROC(native_usergs_sysret64)
 	.endm
 
 /* save partial stack frame */
+	.pushsection .kprobes.text, "ax"
 ENTRY(save_args)
 	XCPT_FRAME
 	cld
@@ -334,6 +335,7 @@ ENTRY(save_args)
 	ret
 	CFI_ENDPROC
 END(save_args)
+	.popsection
 
 ENTRY(save_rest)
 	PARTIAL_FRAME 1 REST_SKIP+8

arch/x86/kernel/hw_breakpoint.c

@@ -433,6 +433,10 @@ static int __kprobes hw_breakpoint_handler(struct die_args *args)
 	dr6_p = (unsigned long *)ERR_PTR(args->err);
 	dr6 = *dr6_p;
 
+	/* If it's a single step, TRAP bits are random */
+	if (dr6 & DR_STEP)
+		return NOTIFY_DONE;
+
 	/* Do an early return if no trap bits are set in DR6 */
 	if ((dr6 & DR_TRAP_BITS) == 0)
 		return NOTIFY_DONE;

arch/x86/kernel/mmconf-fam10h_64.c

@@ -25,7 +25,6 @@ struct pci_hostbridge_probe {
 };
 
 static u64 __cpuinitdata fam10h_pci_mmconf_base;
-static int __cpuinitdata fam10h_pci_mmconf_base_status;
 
 static struct pci_hostbridge_probe pci_probes[] __cpuinitdata = {
 	{ 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 },
@@ -44,10 +43,12 @@ static int __cpuinit cmp_range(const void *x1, const void *x2)
 	return start1 - start2;
 }
 
-/*[47:0] */
-/* need to avoid (0xfd<<32) and (0xfe<<32), ht used space */
+#define MMCONF_UNIT (1ULL << FAM10H_MMIO_CONF_BASE_SHIFT)
+#define MMCONF_MASK (~(MMCONF_UNIT - 1))
+#define MMCONF_SIZE (MMCONF_UNIT << 8)
+/* need to avoid (0xfd<<32), (0xfe<<32), and (0xff<<32), ht used space */
 #define FAM10H_PCI_MMCONF_BASE (0xfcULL<<32)
-#define BASE_VALID(b) ((b != (0xfdULL << 32)) && (b != (0xfeULL << 32)))
+#define BASE_VALID(b) ((b) + MMCONF_SIZE <= (0xfdULL<<32) || (b) >= (1ULL<<40))
 static void __cpuinit get_fam10h_pci_mmconf_base(void)
 {
 	int i;
@@ -64,12 +65,11 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void)
 	struct range range[8];
 
 	/* only try to get setting from BSP */
-	/* -1 or 1 */
-	if (fam10h_pci_mmconf_base_status)
+	if (fam10h_pci_mmconf_base)
 		return;
 
 	if (!early_pci_allowed())
-		goto fail;
+		return;
 
 	found = 0;
 	for (i = 0; i < ARRAY_SIZE(pci_probes); i++) {
@@ -91,7 +91,7 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void)
 	}
 
 	if (!found)
-		goto fail;
+		return;
 
 	/* SYS_CFG */
 	address = MSR_K8_SYSCFG;
@@ -99,16 +99,16 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void)
 
 	/* TOP_MEM2 is not enabled? */
 	if (!(val & (1<<21))) {
-		tom2 = 0;
+		tom2 = 1ULL << 32;
 	} else {
 		/* TOP_MEM2 */
 		address = MSR_K8_TOP_MEM2;
 		rdmsrl(address, val);
-		tom2 = val & (0xffffULL<<32);
+		tom2 = max(val & 0xffffff800000ULL, 1ULL << 32);
 	}
 
 	if (base <= tom2)
-		base = tom2 + (1ULL<<32);
+		base = (tom2 + 2 * MMCONF_UNIT - 1) & MMCONF_MASK;
 
 	/*
 	 * need to check if the range is in the high mmio range that is
@@ -123,11 +123,11 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void)
 		if (!(reg & 3))
 			continue;
 
-		start = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/
+		start = (u64)(reg & 0xffffff00) << 8; /* 39:16 on 31:8*/
 		reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3));
-		end = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/
+		end = ((u64)(reg & 0xffffff00) << 8) | 0xffff; /* 39:16 on 31:8*/
 
-		if (!end)
+		if (end < tom2)
 			continue;
 
 		range[hi_mmio_num].start = start;
@@ -143,32 +143,27 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void)
 
 	if (range[hi_mmio_num - 1].end < base)
 		goto out;
-	if (range[0].start > base)
+	if (range[0].start > base + MMCONF_SIZE)
 		goto out;
 
 	/* need to find one window */
-	base = range[0].start - (1ULL << 32);
+	base = (range[0].start & MMCONF_MASK) - MMCONF_UNIT;
 	if ((base > tom2) && BASE_VALID(base))
 		goto out;
-	base = range[hi_mmio_num - 1].end + (1ULL << 32);
-	if ((base > tom2) && BASE_VALID(base))
+	base = (range[hi_mmio_num - 1].end + MMCONF_UNIT) & MMCONF_MASK;
+	if (BASE_VALID(base))
 		goto out;
 	/* need to find window between ranges */
-	if (hi_mmio_num > 1)
-	for (i = 0; i < hi_mmio_num - 1; i++) {
-		if (range[i + 1].start > (range[i].end + (1ULL << 32))) {
-			base = range[i].end + (1ULL << 32);
-			if ((base > tom2) && BASE_VALID(base))
-				goto out;
-		}
+	for (i = 1; i < hi_mmio_num; i++) {
+		base = (range[i - 1].end + MMCONF_UNIT) & MMCONF_MASK;
+		val = range[i].start & MMCONF_MASK;
+		if (val >= base + MMCONF_SIZE && BASE_VALID(base))
+			goto out;
 	}
-
-fail:
-	fam10h_pci_mmconf_base_status = -1;
 	return;
+
 out:
 	fam10h_pci_mmconf_base = base;
-	fam10h_pci_mmconf_base_status = 1;
 }
 
 void __cpuinit fam10h_check_enable_mmcfg(void)
@@ -190,11 +185,10 @@ void __cpuinit fam10h_check_enable_mmcfg(void)
 
 		/* only trust the one handle 256 buses, if acpi=off */
 		if (!acpi_pci_disabled || busnbits >= 8) {
-			u64 base;
-			base = val & (0xffffULL << 32);
-			if (fam10h_pci_mmconf_base_status <= 0) {
+			u64 base = val & MMCONF_MASK;
+
+			if (!fam10h_pci_mmconf_base) {
 				fam10h_pci_mmconf_base = base;
-				fam10h_pci_mmconf_base_status = 1;
 				return;
 			} else if (fam10h_pci_mmconf_base ==  base)
 				return;
@@ -206,8 +200,10 @@ void __cpuinit fam10h_check_enable_mmcfg(void)
 	 * with 256 buses
 	 */
 	get_fam10h_pci_mmconf_base();
-	if (fam10h_pci_mmconf_base_status <= 0)
+	if (!fam10h_pci_mmconf_base) {
+		pci_probe &= ~PCI_CHECK_ENABLE_AMD_MMCONF;
 		return;
+	}
 
 	printk(KERN_INFO "Enable MMCONFIG on AMD Family 10h\n");
 	val &= ~((FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT) |

arch/x86/mm/tlb.c

@@ -223,7 +223,7 @@ void native_flush_tlb_others(const struct cpumask *cpumask,
 
 static void __cpuinit calculate_tlb_offset(void)
 {
-	int cpu, node, nr_node_vecs;
+	int cpu, node, nr_node_vecs, idx = 0;
 	/*
 	 * we are changing tlb_vector_offset for each CPU in runtime, but this
 	 * will not cause inconsistency, as the write is atomic under X86. we
@@ -239,7 +239,7 @@ static void __cpuinit calculate_tlb_offset(void)
 		nr_node_vecs = NUM_INVALIDATE_TLB_VECTORS/nr_online_nodes;
 
 	for_each_online_node(node) {
-		int node_offset = (node % NUM_INVALIDATE_TLB_VECTORS) *
+		int node_offset = (idx % NUM_INVALIDATE_TLB_VECTORS) *
 			nr_node_vecs;
 		int cpu_offset = 0;
 		for_each_cpu(cpu, cpumask_of_node(node)) {
@@ -248,6 +248,7 @@ static void __cpuinit calculate_tlb_offset(void)
 			cpu_offset++;
 			cpu_offset = cpu_offset % nr_node_vecs;
 		}
+		idx++;
 	}
 }
 

arch/x86/platform/uv/tlb_uv.c

@@ -1455,7 +1455,7 @@ static void __init uv_init_uvhub(int uvhub, int vector)
 	 * the below initialization can't be in firmware because the
 	 * messaging IRQ will be determined by the OS
 	 */
-	apicid = uvhub_to_first_apicid(uvhub);
+	apicid = uvhub_to_first_apicid(uvhub) | uv_apicid_hibits;
 	uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG,
 				      ((apicid << 32) | vector));
 }

arch/x86/platform/uv/uv_time.c

@@ -89,6 +89,7 @@ static void uv_rtc_send_IPI(int cpu)
 
 	apicid = cpu_physical_id(cpu);
 	pnode = uv_apicid_to_pnode(apicid);
+	apicid |= uv_apicid_hibits;
 	val = (1UL << UVH_IPI_INT_SEND_SHFT) |
 	      (apicid << UVH_IPI_INT_APIC_ID_SHFT) |
 	      (X86_PLATFORM_IPI_VECTOR << UVH_IPI_INT_VECTOR_SHFT);
@@ -107,6 +108,7 @@ static int uv_intr_pending(int pnode)
 static int uv_setup_intr(int cpu, u64 expires)
 {
 	u64 val;
+	unsigned long apicid = cpu_physical_id(cpu) | uv_apicid_hibits;
 	int pnode = uv_cpu_to_pnode(cpu);
 
 	uv_write_global_mmr64(pnode, UVH_RTC1_INT_CONFIG,
@@ -117,7 +119,7 @@ static int uv_setup_intr(int cpu, u64 expires)
 		UVH_EVENT_OCCURRED0_RTC1_MASK);
 
 	val = (X86_PLATFORM_IPI_VECTOR << UVH_RTC1_INT_CONFIG_VECTOR_SHFT) |
-		((u64)cpu_physical_id(cpu) << UVH_RTC1_INT_CONFIG_APIC_ID_SHFT);
+		((u64)apicid << UVH_RTC1_INT_CONFIG_APIC_ID_SHFT);
 
 	/* Set configuration */
 	uv_write_global_mmr64(pnode, UVH_RTC1_INT_CONFIG, val);

block/blk-throttle.c

@@ -645,7 +645,7 @@ static int throtl_dispatch_tg(struct throtl_data *td, struct throtl_grp *tg,
 {
 	unsigned int nr_reads = 0, nr_writes = 0;
 	unsigned int max_nr_reads = throtl_grp_quantum*3/4;
-	unsigned int max_nr_writes = throtl_grp_quantum - nr_reads;
+	unsigned int max_nr_writes = throtl_grp_quantum - max_nr_reads;
 	struct bio *bio;
 
 	/* Try to dispatch 75% READS and 25% WRITES */

drivers/block/amiflop.c

@@ -1341,7 +1341,7 @@ static struct request *set_next_request(void)
 {
 	struct request_queue *q;
 	int cnt = FD_MAX_UNITS;
-	struct request *rq;
+	struct request *rq = NULL;
 
 	/* Find next queue we can dispatch from */
 	fdc_queue = fdc_queue + 1;

drivers/block/ataflop.c

@@ -1399,7 +1399,7 @@ static struct request *set_next_request(void)
 {
 	struct request_queue *q;
 	int old_pos = fdc_queue;
-	struct request *rq;
+	struct request *rq = NULL;
 
 	do {
 		q = unit[fdc_queue].disk->queue;

drivers/block/cciss.c

@@ -66,6 +66,7 @@ MODULE_VERSION("3.6.26");
 MODULE_LICENSE("GPL");
 
 static DEFINE_MUTEX(cciss_mutex);
+static struct proc_dir_entry *proc_cciss;
 
 #include "cciss_cmd.h"
 #include "cciss.h"
@@ -363,8 +364,6 @@ static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
 #define ENG_GIG_FACTOR (ENG_GIG/512)
 #define ENGAGE_SCSI	"engage scsi"
 
-static struct proc_dir_entry *proc_cciss;
-
 static void cciss_seq_show_header(struct seq_file *seq)
 {
 	ctlr_info_t *h = seq->private;

drivers/block/xen-blkfront.c

@@ -65,7 +65,7 @@ enum blkif_state {
 
 struct blk_shadow {
 	struct blkif_request req;
-	unsigned long request;
+	struct request *request;
 	unsigned long frame[BLKIF_MAX_SEGMENTS_PER_REQUEST];
 };
 
@@ -136,7 +136,7 @@ static void add_id_to_freelist(struct blkfront_info *info,
 			       unsigned long id)
 {
 	info->shadow[id].req.id  = info->shadow_free;
-	info->shadow[id].request = 0;
+	info->shadow[id].request = NULL;
 	info->shadow_free = id;
 }
 
@@ -245,14 +245,11 @@ static int blkif_ioctl(struct block_device *bdev, fmode_t mode,
 }
 
 /*
- * blkif_queue_request
+ * Generate a Xen blkfront IO request from a blk layer request.  Reads
+ * and writes are handled as expected.  Since we lack a loose flush
+ * request, we map flushes into a full ordered barrier.
  *
- * request block io
- *
- * id: for guest use only.
- * operation: BLKIF_OP_{READ,WRITE,PROBE}
- * buffer: buffer to read/write into. this should be a
- *   virtual address in the guest os.
+ * @req: a request struct
  */
 static int blkif_queue_request(struct request *req)
 {
@@ -281,7 +278,7 @@ static int blkif_queue_request(struct request *req)
 	/* Fill out a communications ring structure. */
 	ring_req = RING_GET_REQUEST(&info->ring, info->ring.req_prod_pvt);
 	id = get_id_from_freelist(info);
-	info->shadow[id].request = (unsigned long)req;
+	info->shadow[id].request = req;
 
 	ring_req->id = id;
 	ring_req->sector_number = (blkif_sector_t)blk_rq_pos(req);
@@ -290,6 +287,18 @@ static int blkif_queue_request(struct request *req)
 	ring_req->operation = rq_data_dir(req) ?
 		BLKIF_OP_WRITE : BLKIF_OP_READ;
 
+	if (req->cmd_flags & (REQ_FLUSH | REQ_FUA)) {
+		/*
+		 * Ideally we could just do an unordered
+		 * flush-to-disk, but all we have is a full write
+		 * barrier at the moment.  However, a barrier write is
+		 * a superset of FUA, so we can implement it the same
+		 * way.  (It's also a FLUSH+FUA, since it is
+		 * guaranteed ordered WRT previous writes.)
+		 */
+		ring_req->operation = BLKIF_OP_WRITE_BARRIER;
+	}
+
 	ring_req->nr_segments = blk_rq_map_sg(req->q, req, info->sg);
 	BUG_ON(ring_req->nr_segments > BLKIF_MAX_SEGMENTS_PER_REQUEST);
 
@@ -634,7 +643,7 @@ static irqreturn_t blkif_interrupt(int irq, void *dev_id)
 
 		bret = RING_GET_RESPONSE(&info->ring, i);
 		id   = bret->id;
-		req  = (struct request *)info->shadow[id].request;
+		req  = info->shadow[id].request;
 
 		blkif_completion(&info->shadow[id]);
 
@@ -647,6 +656,16 @@ static irqreturn_t blkif_interrupt(int irq, void *dev_id)
 				printk(KERN_WARNING "blkfront: %s: write barrier op failed\n",
 				       info->gd->disk_name);
 				error = -EOPNOTSUPP;
+			}
+			if (unlikely(bret->status == BLKIF_RSP_ERROR &&
+				     info->shadow[id].req.nr_segments == 0)) {
+				printk(KERN_WARNING "blkfront: %s: empty write barrier op failed\n",
+				       info->gd->disk_name);
+				error = -EOPNOTSUPP;
+			}
+			if (unlikely(error)) {
+				if (error == -EOPNOTSUPP)
+					error = 0;
 				info->feature_flush = 0;
 				xlvbd_flush(info);
 			}
@@ -899,7 +918,7 @@ static int blkif_recover(struct blkfront_info *info)
 	/* Stage 3: Find pending requests and requeue them. */
 	for (i = 0; i < BLK_RING_SIZE; i++) {
 		/* Not in use? */
-		if (copy[i].request == 0)
+		if (!copy[i].request)
 			continue;
 
 		/* Grab a request slot and copy shadow state into it. */
@@ -916,9 +935,7 @@ static int blkif_recover(struct blkfront_info *info)
 				req->seg[j].gref,
 				info->xbdev->otherend_id,
 				pfn_to_mfn(info->shadow[req->id].frame[j]),
-				rq_data_dir(
-					(struct request *)
-					info->shadow[req->id].request));
+				rq_data_dir(info->shadow[req->id].request));
 		info->shadow[req->id].req = *req;
 
 		info->ring.req_prod_pvt++;
@@ -1067,14 +1084,8 @@ static void blkfront_connect(struct blkfront_info *info)
 	 */
 	info->feature_flush = 0;
 
-	/*
-	 * The driver doesn't properly handled empty flushes, so
-	 * lets disable barrier support for now.
-	 */
-#if 0
 	if (!err && barrier)
-		info->feature_flush = REQ_FLUSH;
-#endif
+		info->feature_flush = REQ_FLUSH | REQ_FUA;
 
 	err = xlvbd_alloc_gendisk(sectors, info, binfo, sector_size);
 	if (err) {

drivers/char/tpm/tpm_tis.c

@@ -25,6 +25,7 @@
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/wait.h>
+#include <linux/acpi.h>
 #include "tpm.h"
 
 #define TPM_HEADER_SIZE 10
@@ -78,6 +79,26 @@ enum tis_defaults {
 static LIST_HEAD(tis_chips);
 static DEFINE_SPINLOCK(tis_lock);
 
+#ifdef CONFIG_ACPI
+static int is_itpm(struct pnp_dev *dev)
+{
+	struct acpi_device *acpi = pnp_acpi_device(dev);
+	struct acpi_hardware_id *id;
+
+	list_for_each_entry(id, &acpi->pnp.ids, list) {
+		if (!strcmp("INTC0102", id->id))
+			return 1;
+	}
+
+	return 0;
+}
+#else
+static int is_itpm(struct pnp_dev *dev)
+{
+	return 0;
+}
+#endif
+
 static int check_locality(struct tpm_chip *chip, int l)
 {
 	if ((ioread8(chip->vendor.iobase + TPM_ACCESS(l)) &
@@ -472,6 +493,9 @@ static int tpm_tis_init(struct device *dev, resource_size_t start,
 		 "1.2 TPM (device-id 0x%X, rev-id %d)\n",
 		 vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0)));
 
+	if (is_itpm(to_pnp_dev(dev)))
+		itpm = 1;
+
 	if (itpm)
 		dev_info(dev, "Intel iTPM workaround enabled\n");
 

drivers/edac/Makefile

@@ -10,16 +10,16 @@ obj-$(CONFIG_EDAC)			:= edac_stub.o
 obj-$(CONFIG_EDAC_MM_EDAC)		+= edac_core.o
 obj-$(CONFIG_EDAC_MCE)			+= edac_mce.o
 
-edac_core-objs	:= edac_mc.o edac_device.o edac_mc_sysfs.o edac_pci_sysfs.o
-edac_core-objs	+= edac_module.o edac_device_sysfs.o
+edac_core-y	:= edac_mc.o edac_device.o edac_mc_sysfs.o edac_pci_sysfs.o
+edac_core-y	+= edac_module.o edac_device_sysfs.o
 
 ifdef CONFIG_PCI
-edac_core-objs	+= edac_pci.o edac_pci_sysfs.o
+edac_core-y	+= edac_pci.o edac_pci_sysfs.o
 endif
 
 obj-$(CONFIG_EDAC_MCE_INJ)		+= mce_amd_inj.o
 
-edac_mce_amd-objs			:= mce_amd.o
+edac_mce_amd-y				:= mce_amd.o
 obj-$(CONFIG_EDAC_DECODE_MCE)		+= edac_mce_amd.o
 
 obj-$(CONFIG_EDAC_AMD76X)		+= amd76x_edac.o

drivers/edac/mce_amd_inj.c

@@ -139,7 +139,7 @@ static int __init edac_init_mce_inject(void)
 	return 0;
 
 err_sysfs_create:
-	while (i-- >= 0)
+	while (--i >= 0)
 		sysfs_remove_file(mce_kobj, &sysfs_attrs[i]->attr);
 
 	kobject_del(mce_kobj);

drivers/firewire/net.c

@@ -7,6 +7,7 @@
  */
 
 #include <linux/bug.h>
+#include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/firewire.h>
 #include <linux/firewire-constants.h>
@@ -26,8 +27,14 @@
 #include <asm/unaligned.h>
 #include <net/arp.h>
 
-#define FWNET_MAX_FRAGMENTS	25	/* arbitrary limit */
-#define FWNET_ISO_PAGE_COUNT	(PAGE_SIZE < 16 * 1024 ? 4 : 2)
+/* rx limits */
+#define FWNET_MAX_FRAGMENTS		30 /* arbitrary, > TX queue depth */
+#define FWNET_ISO_PAGE_COUNT		(PAGE_SIZE < 16*1024 ? 4 : 2)
+
+/* tx limits */
+#define FWNET_MAX_QUEUED_DATAGRAMS	20 /* < 64 = number of tlabels */
+#define FWNET_MIN_QUEUED_DATAGRAMS	10 /* should keep AT DMA busy enough */
+#define FWNET_TX_QUEUE_LEN		FWNET_MAX_QUEUED_DATAGRAMS /* ? */
 
 #define IEEE1394_BROADCAST_CHANNEL	31
 #define IEEE1394_ALL_NODES		(0xffc0 | 0x003f)
@@ -169,15 +176,8 @@ struct fwnet_device {
 	struct fw_address_handler handler;
 	u64 local_fifo;
 
-	/* List of packets to be sent */
-	struct list_head packet_list;
-	/*
-	 * List of packets that were broadcasted.  When we get an ISO interrupt
-	 * one of them has been sent
-	 */
-	struct list_head broadcasted_list;
-	/* List of packets that have been sent but not yet acked */
-	struct list_head sent_list;
+	/* Number of tx datagrams that have been queued but not yet acked */
+	int queued_datagrams;
 
 	struct list_head peer_list;
 	struct fw_card *card;
@@ -195,7 +195,7 @@ struct fwnet_peer {
 	unsigned pdg_size;        /* pd_list size */
 
 	u16 datagram_label;       /* outgoing datagram label */
-	unsigned max_payload;     /* includes RFC2374_FRAG_HDR_SIZE overhead */
+	u16 max_payload;          /* includes RFC2374_FRAG_HDR_SIZE overhead */
 	int node_id;
 	int generation;
 	unsigned speed;
@@ -203,22 +203,18 @@ struct fwnet_peer {
 
 /* This is our task struct. It's used for the packet complete callback.  */
 struct fwnet_packet_task {
-	/*
-	 * ptask can actually be on dev->packet_list, dev->broadcasted_list,
-	 * or dev->sent_list depending on its current state.
-	 */
-	struct list_head pt_link;
 	struct fw_transaction transaction;
 	struct rfc2734_header hdr;
 	struct sk_buff *skb;
 	struct fwnet_device *dev;
 
 	int outstanding_pkts;
-	unsigned max_payload;
 	u64 fifo_addr;
 	u16 dest_node;
+	u16 max_payload;
 	u8 generation;
 	u8 speed;
+	u8 enqueued;
 };
 
 /*
@@ -650,8 +646,6 @@ static int fwnet_finish_incoming_packet(struct net_device *net,
 		net->stats.rx_packets++;
 		net->stats.rx_bytes += skb->len;
 	}
-	if (netif_queue_stopped(net))
-		netif_wake_queue(net);
 
 	return 0;
 
@@ -660,8 +654,6 @@ static int fwnet_finish_incoming_packet(struct net_device *net,
 	net->stats.rx_dropped++;
 
 	dev_kfree_skb_any(skb);
-	if (netif_queue_stopped(net))
-		netif_wake_queue(net);
 
 	return -ENOENT;
 }
@@ -793,15 +785,10 @@ static int fwnet_incoming_packet(struct fwnet_device *dev, __be32 *buf, int len,
 	 * Datagram is not complete, we're done for the
 	 * moment.
 	 */
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	return 0;
+	retval = 0;
  fail:
 	spin_unlock_irqrestore(&dev->lock, flags);
 
-	if (netif_queue_stopped(net))
-		netif_wake_queue(net);
-
 	return retval;
 }
 
@@ -901,11 +888,19 @@ static void fwnet_free_ptask(struct fwnet_packet_task *ptask)
 	kmem_cache_free(fwnet_packet_task_cache, ptask);
 }
 
+/* Caller must hold dev->lock. */
+static void dec_queued_datagrams(struct fwnet_device *dev)
+{
+	if (--dev->queued_datagrams == FWNET_MIN_QUEUED_DATAGRAMS)
+		netif_wake_queue(dev->netdev);
+}
+
 static int fwnet_send_packet(struct fwnet_packet_task *ptask);
 
 static void fwnet_transmit_packet_done(struct fwnet_packet_task *ptask)
 {
 	struct fwnet_device *dev = ptask->dev;
+	struct sk_buff *skb = ptask->skb;
 	unsigned long flags;
 	bool free;
 
@@ -914,10 +909,14 @@ static void fwnet_transmit_packet_done(struct fwnet_packet_task *ptask)
 	ptask->outstanding_pkts--;
 
 	/* Check whether we or the networking TX soft-IRQ is last user. */
-	free = (ptask->outstanding_pkts == 0 && !list_empty(&ptask->pt_link));
+	free = (ptask->outstanding_pkts == 0 && ptask->enqueued);
+	if (free)
+		dec_queued_datagrams(dev);
 
-	if (ptask->outstanding_pkts == 0)
-		list_del(&ptask->pt_link);
+	if (ptask->outstanding_pkts == 0) {
+		dev->netdev->stats.tx_packets++;
+		dev->netdev->stats.tx_bytes += skb->len;
+	}
 
 	spin_unlock_irqrestore(&dev->lock, flags);
 
@@ -926,7 +925,6 @@ static void fwnet_transmit_packet_done(struct fwnet_packet_task *ptask)
 		u16 fg_off;
 		u16 datagram_label;
 		u16 lf;
-		struct sk_buff *skb;
 
 		/* Update the ptask to point to the next fragment and send it */
 		lf = fwnet_get_hdr_lf(&ptask->hdr);
@@ -953,7 +951,7 @@ static void fwnet_transmit_packet_done(struct fwnet_packet_task *ptask)
 			datagram_label = fwnet_get_hdr_dgl(&ptask->hdr);
 			break;
 		}
-		skb = ptask->skb;
+
 		skb_pull(skb, ptask->max_payload);
 		if (ptask->outstanding_pkts > 1) {
 			fwnet_make_sf_hdr(&ptask->hdr, RFC2374_HDR_INTFRAG,
@@ -970,6 +968,31 @@ static void fwnet_transmit_packet_done(struct fwnet_packet_task *ptask)
 		fwnet_free_ptask(ptask);
 }
 
+static void fwnet_transmit_packet_failed(struct fwnet_packet_task *ptask)
+{
+	struct fwnet_device *dev = ptask->dev;
+	unsigned long flags;
+	bool free;
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	/* One fragment failed; don't try to send remaining fragments. */
+	ptask->outstanding_pkts = 0;
+
+	/* Check whether we or the networking TX soft-IRQ is last user. */
+	free = ptask->enqueued;
+	if (free)
+		dec_queued_datagrams(dev);
+
+	dev->netdev->stats.tx_dropped++;
+	dev->netdev->stats.tx_errors++;
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	if (free)
+		fwnet_free_ptask(ptask);
+}
+
 static void fwnet_write_complete(struct fw_card *card, int rcode,
 				 void *payload, size_t length, void *data)
 {
@@ -977,11 +1000,12 @@ static void fwnet_write_complete(struct fw_card *card, int rcode,
 
 	ptask = data;
 
-	if (rcode == RCODE_COMPLETE)
+	if (rcode == RCODE_COMPLETE) {
 		fwnet_transmit_packet_done(ptask);
-	else
+	} else {
 		fw_error("fwnet_write_complete: failed: %x\n", rcode);
-		/* ??? error recovery */
+		fwnet_transmit_packet_failed(ptask);
+	}
 }
 
 static int fwnet_send_packet(struct fwnet_packet_task *ptask)
@@ -1039,9 +1063,11 @@ static int fwnet_send_packet(struct fwnet_packet_task *ptask)
 		spin_lock_irqsave(&dev->lock, flags);
 
 		/* If the AT tasklet already ran, we may be last user. */
-		free = (ptask->outstanding_pkts == 0 && list_empty(&ptask->pt_link));
+		free = (ptask->outstanding_pkts == 0 && !ptask->enqueued);
 		if (!free)
-			list_add_tail(&ptask->pt_link, &dev->broadcasted_list);
+			ptask->enqueued = true;
+		else
+			dec_queued_datagrams(dev);
 
 		spin_unlock_irqrestore(&dev->lock, flags);
 
@@ -1056,9 +1082,11 @@ static int fwnet_send_packet(struct fwnet_packet_task *ptask)
 	spin_lock_irqsave(&dev->lock, flags);
 
 	/* If the AT tasklet already ran, we may be last user. */
-	free = (ptask->outstanding_pkts == 0 && list_empty(&ptask->pt_link));
+	free = (ptask->outstanding_pkts == 0 && !ptask->enqueued);
 	if (!free)
-		list_add_tail(&ptask->pt_link, &dev->sent_list);
+		ptask->enqueued = true;
+	else
+		dec_queued_datagrams(dev);
 
 	spin_unlock_irqrestore(&dev->lock, flags);
 
@@ -1224,6 +1252,15 @@ static netdev_tx_t fwnet_tx(struct sk_buff *skb, struct net_device *net)
 	struct fwnet_peer *peer;
 	unsigned long flags;
 
+	spin_lock_irqsave(&dev->lock, flags);
+
+	/* Can this happen? */
+	if (netif_queue_stopped(dev->netdev)) {
+		spin_unlock_irqrestore(&dev->lock, flags);
+
+		return NETDEV_TX_BUSY;
+	}
+
 	ptask = kmem_cache_alloc(fwnet_packet_task_cache, GFP_ATOMIC);
 	if (ptask == NULL)
 		goto fail;
@@ -1242,9 +1279,6 @@ static netdev_tx_t fwnet_tx(struct sk_buff *skb, struct net_device *net)
 	proto = hdr_buf.h_proto;
 	dg_size = skb->len;
 
-	/* serialize access to peer, including peer->datagram_label */
-	spin_lock_irqsave(&dev->lock, flags);
-
 	/*
 	 * Set the transmission type for the packet.  ARP packets and IP
 	 * broadcast packets are sent via GASP.
@@ -1266,7 +1300,7 @@ static netdev_tx_t fwnet_tx(struct sk_buff *skb, struct net_device *net)
 
 		peer = fwnet_peer_find_by_guid(dev, be64_to_cpu(guid));
 		if (!peer || peer->fifo == FWNET_NO_FIFO_ADDR)
-			goto fail_unlock;
+			goto fail;
 
 		generation         = peer->generation;
 		dest_node          = peer->node_id;
@@ -1320,18 +1354,21 @@ static netdev_tx_t fwnet_tx(struct sk_buff *skb, struct net_device *net)
 		max_payload += RFC2374_FRAG_HDR_SIZE;
 	}
 
+	if (++dev->queued_datagrams == FWNET_MAX_QUEUED_DATAGRAMS)
+		netif_stop_queue(dev->netdev);
+
 	spin_unlock_irqrestore(&dev->lock, flags);
 
 	ptask->max_payload = max_payload;
-	INIT_LIST_HEAD(&ptask->pt_link);
+	ptask->enqueued    = 0;
 
 	fwnet_send_packet(ptask);
 
 	return NETDEV_TX_OK;
 
- fail_unlock:
-	spin_unlock_irqrestore(&dev->lock, flags);
  fail:
+	spin_unlock_irqrestore(&dev->lock, flags);
+
 	if (ptask)
 		kmem_cache_free(fwnet_packet_task_cache, ptask);
 
@@ -1377,7 +1414,7 @@ static void fwnet_init_dev(struct net_device *net)
 	net->addr_len		= FWNET_ALEN;
 	net->hard_header_len	= FWNET_HLEN;
 	net->type		= ARPHRD_IEEE1394;
-	net->tx_queue_len	= 10;
+	net->tx_queue_len	= FWNET_TX_QUEUE_LEN;
 }
 
 /* caller must hold fwnet_device_mutex */
@@ -1457,14 +1494,9 @@ static int fwnet_probe(struct device *_dev)
 	dev->broadcast_rcv_context = NULL;
 	dev->broadcast_xmt_max_payload = 0;
 	dev->broadcast_xmt_datagramlabel = 0;
-
 	dev->local_fifo = FWNET_NO_FIFO_ADDR;
-
-	INIT_LIST_HEAD(&dev->packet_list);
-	INIT_LIST_HEAD(&dev->broadcasted_list);
-	INIT_LIST_HEAD(&dev->sent_list);
+	dev->queued_datagrams = 0;
 	INIT_LIST_HEAD(&dev->peer_list);
-
 	dev->card = card;
 	dev->netdev = net;
 
@@ -1522,7 +1554,7 @@ static int fwnet_remove(struct device *_dev)
 	struct fwnet_peer *peer = dev_get_drvdata(_dev);
 	struct fwnet_device *dev = peer->dev;
 	struct net_device *net;
-	struct fwnet_packet_task *ptask, *pt_next;
+	int i;
 
 	mutex_lock(&fwnet_device_mutex);
 
@@ -1540,21 +1572,9 @@ static int fwnet_remove(struct device *_dev)
 					      dev->card);
 			fw_iso_context_destroy(dev->broadcast_rcv_context);
 		}
-		list_for_each_entry_safe(ptask, pt_next,
-					 &dev->packet_list, pt_link) {
-			dev_kfree_skb_any(ptask->skb);
-			kmem_cache_free(fwnet_packet_task_cache, ptask);
-		}
-		list_for_each_entry_safe(ptask, pt_next,
-					 &dev->broadcasted_list, pt_link) {
-			dev_kfree_skb_any(ptask->skb);
-			kmem_cache_free(fwnet_packet_task_cache, ptask);
-		}
-		list_for_each_entry_safe(ptask, pt_next,
-					 &dev->sent_list, pt_link) {
-			dev_kfree_skb_any(ptask->skb);
-			kmem_cache_free(fwnet_packet_task_cache, ptask);
-		}
+		for (i = 0; dev->queued_datagrams && i < 5; i++)
+			ssleep(1);
+		WARN_ON(dev->queued_datagrams);
 		list_del(&dev->dev_link);
 
 		free_netdev(net);

drivers/isdn/icn/icn.c

@@ -1627,7 +1627,7 @@ __setup("icn=", icn_setup);
 static int __init icn_init(void)
 {
 	char *p;
-	char rev[10];
+	char rev[20];
 
 	memset(&dev, 0, sizeof(icn_dev));
 	dev.memaddr = (membase & 0x0ffc000);
@@ -1637,9 +1637,10 @@ static int __init icn_init(void)
 	spin_lock_init(&dev.devlock);
 
 	if ((p = strchr(revision, ':'))) {
-		strcpy(rev, p + 1);
+		strncpy(rev, p + 1, 20);
 		p = strchr(rev, '$');
-		*p = 0;
+		if (p)
+			*p = 0;
 	} else
 		strcpy(rev, " ??? ");
 	printk(KERN_NOTICE "ICN-ISDN-driver Rev%smem=0x%08lx\n", rev,

drivers/mmc/core/core.c

@@ -1559,7 +1559,7 @@ void mmc_stop_host(struct mmc_host *host)
 
 	if (host->caps & MMC_CAP_DISABLE)
 		cancel_delayed_work(&host->disable);
-	cancel_delayed_work(&host->detect);
+	cancel_delayed_work_sync(&host->detect);
 	mmc_flush_scheduled_work();
 
 	/* clear pm flags now and let card drivers set them as needed */

drivers/mmc/core/mmc.c

@@ -375,7 +375,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	struct mmc_card *oldcard)
 {
 	struct mmc_card *card;
-	int err, ddr = MMC_SDR_MODE;
+	int err, ddr = 0;
 	u32 cid[4];
 	unsigned int max_dtr;
 
@@ -562,7 +562,11 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 			       1 << bus_width, ddr);
 			err = 0;
 		} else {
-			mmc_card_set_ddr_mode(card);
+			if (ddr)
+				mmc_card_set_ddr_mode(card);
+			else
+				ddr = MMC_SDR_MODE;
+
 			mmc_set_bus_width_ddr(card->host, bus_width, ddr);
 		}
 	}

drivers/mmc/core/sdio.c

@@ -547,9 +547,11 @@ static void mmc_sdio_detect(struct mmc_host *host)
 	BUG_ON(!host->card);
 
 	/* Make sure card is powered before detecting it */
-	err = pm_runtime_get_sync(&host->card->dev);
-	if (err < 0)
-		goto out;
+	if (host->caps & MMC_CAP_POWER_OFF_CARD) {
+		err = pm_runtime_get_sync(&host->card->dev);
+		if (err < 0)
+			goto out;
+	}
 
 	mmc_claim_host(host);
 
@@ -560,6 +562,20 @@ static void mmc_sdio_detect(struct mmc_host *host)
 
 	mmc_release_host(host);
 
+	/*
+	 * Tell PM core it's OK to power off the card now.
+	 *
+	 * The _sync variant is used in order to ensure that the card
+	 * is left powered off in case an error occurred, and the card
+	 * is going to be removed.
+	 *
+	 * Since there is no specific reason to believe a new user
+	 * is about to show up at this point, the _sync variant is
+	 * desirable anyway.
+	 */
+	if (host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_put_sync(&host->card->dev);
+
 out:
 	if (err) {
 		mmc_sdio_remove(host);
@@ -568,9 +584,6 @@ out:
 		mmc_detach_bus(host);
 		mmc_release_host(host);
 	}
-
-	/* Tell PM core that we're done */
-	pm_runtime_put(&host->card->dev);
 }
 
 /*
@@ -718,16 +731,21 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr)
 	card = host->card;
 
 	/*
-	 * Let runtime PM core know our card is active
+	 * Enable runtime PM only if supported by host+card+board
 	 */
-	err = pm_runtime_set_active(&card->dev);
-	if (err)
-		goto remove;
+	if (host->caps & MMC_CAP_POWER_OFF_CARD) {
+		/*
+		 * Let runtime PM core know our card is active
+		 */
+		err = pm_runtime_set_active(&card->dev);
+		if (err)
+			goto remove;
 
-	/*
-	 * Enable runtime PM for this card
-	 */
-	pm_runtime_enable(&card->dev);
+		/*
+		 * Enable runtime PM for this card
+		 */
+		pm_runtime_enable(&card->dev);
+	}
 
 	/*
 	 * The number of functions on the card is encoded inside
@@ -745,9 +763,10 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr)
 			goto remove;
 
 		/*
-		 * Enable Runtime PM for this func
+		 * Enable Runtime PM for this func (if supported)
 		 */
-		pm_runtime_enable(&card->sdio_func[i]->dev);
+		if (host->caps & MMC_CAP_POWER_OFF_CARD)
+			pm_runtime_enable(&card->sdio_func[i]->dev);
 	}
 
 	mmc_release_host(host);

drivers/mmc/core/sdio_bus.c

@@ -17,6 +17,7 @@
 #include <linux/pm_runtime.h>
 
 #include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
 #include <linux/mmc/sdio_func.h>
 
 #include "sdio_cis.h"
@@ -132,9 +133,11 @@ static int sdio_bus_probe(struct device *dev)
 	 * it should call pm_runtime_put_noidle() in its probe routine and
 	 * pm_runtime_get_noresume() in its remove routine.
 	 */
-	ret = pm_runtime_get_sync(dev);
-	if (ret < 0)
-		goto out;
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) {
+		ret = pm_runtime_get_sync(dev);
+		if (ret < 0)
+			goto out;
+	}
 
 	/* Set the default block size so the driver is sure it's something
 	 * sensible. */
@@ -151,7 +154,8 @@ static int sdio_bus_probe(struct device *dev)
 	return 0;
 
 disable_runtimepm:
-	pm_runtime_put_noidle(dev);
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_put_noidle(dev);
 out:
 	return ret;
 }
@@ -160,12 +164,14 @@ static int sdio_bus_remove(struct device *dev)
 {
 	struct sdio_driver *drv = to_sdio_driver(dev->driver);
 	struct sdio_func *func = dev_to_sdio_func(dev);
-	int ret;
+	int ret = 0;
 
 	/* Make sure card is powered before invoking ->remove() */
-	ret = pm_runtime_get_sync(dev);
-	if (ret < 0)
-		goto out;
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) {
+		ret = pm_runtime_get_sync(dev);
+		if (ret < 0)
+			goto out;
+	}
 
 	drv->remove(func);
 
@@ -178,10 +184,12 @@ static int sdio_bus_remove(struct device *dev)
 	}
 
 	/* First, undo the increment made directly above */
-	pm_runtime_put_noidle(dev);
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_put_noidle(dev);
 
 	/* Then undo the runtime PM settings in sdio_bus_probe() */
-	pm_runtime_put_noidle(dev);
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_put_noidle(dev);
 
 out:
 	return ret;
@@ -191,6 +199,8 @@ out:
 
 static int sdio_bus_pm_prepare(struct device *dev)
 {
+	struct sdio_func *func = dev_to_sdio_func(dev);
+
 	/*
 	 * Resume an SDIO device which was suspended at run time at this
 	 * point, in order to allow standard SDIO suspend/resume paths
@@ -212,7 +222,8 @@ static int sdio_bus_pm_prepare(struct device *dev)
 	 * since there is little point in failing system suspend if a
 	 * device can't be resumed.
 	 */
-	pm_runtime_resume(dev);
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_resume(dev);
 
 	return 0;
 }

drivers/mmc/host/omap_hsmmc.c

@@ -1002,7 +1002,7 @@ static inline void omap_hsmmc_reset_controller_fsm(struct omap_hsmmc_host *host,
 	 * Monitor a 0->1 transition first
 	 */
 	if (mmc_slot(host).features & HSMMC_HAS_UPDATED_RESET) {
-		while ((!(OMAP_HSMMC_READ(host, SYSCTL) & bit))
+		while ((!(OMAP_HSMMC_READ(host->base, SYSCTL) & bit))
 					&& (i++ < limit))
 			cpu_relax();
 	}

drivers/mmc/host/sdhci-esdhc-imx.c

@@ -17,6 +17,7 @@
 #include <linux/clk.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/sdhci-pltfm.h>
+#include <mach/hardware.h>
 #include "sdhci.h"
 #include "sdhci-pltfm.h"
 #include "sdhci-esdhc.h"
@@ -112,6 +113,13 @@ static int esdhc_pltfm_init(struct sdhci_host *host, struct sdhci_pltfm_data *pd
 	clk_enable(clk);
 	pltfm_host->clk = clk;
 
+	if (cpu_is_mx35() || cpu_is_mx51())
+		host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+
+	/* Fix errata ENGcm07207 which is present on i.MX25 and i.MX35 */
+	if (cpu_is_mx25() || cpu_is_mx35())
+		host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK;
+
 	return 0;
 }
 
@@ -133,10 +141,8 @@ static struct sdhci_ops sdhci_esdhc_ops = {
 };
 
 struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
-	.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_NO_MULTIBLOCK
-			| SDHCI_QUIRK_BROKEN_ADMA,
+	.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_ADMA,
 	/* ADMA has issues. Might be fixable */
-	/* NO_MULTIBLOCK might be MX35 only (Errata: ENGcm07207) */
 	.ops = &sdhci_esdhc_ops,
 	.init = esdhc_pltfm_init,
 	.exit = esdhc_pltfm_exit,

drivers/mmc/host/sdhci-pci.c

@@ -149,11 +149,11 @@ static const struct sdhci_pci_fixes sdhci_cafe = {
  * ADMA operation is disabled for Moorestown platform due to
  * hardware bugs.
  */
-static int mrst_hc1_probe(struct sdhci_pci_chip *chip)
+static int mrst_hc_probe(struct sdhci_pci_chip *chip)
 {
 	/*
-	 * slots number is fixed here for MRST as SDIO3 is never used and has
-	 * hardware bugs.
+	 * slots number is fixed here for MRST as SDIO3/5 are never used and
+	 * have hardware bugs.
 	 */
 	chip->num_slots = 1;
 	return 0;
@@ -163,9 +163,9 @@ static const struct sdhci_pci_fixes sdhci_intel_mrst_hc0 = {
 	.quirks		= SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_NO_HISPD_BIT,
 };
 
-static const struct sdhci_pci_fixes sdhci_intel_mrst_hc1 = {
+static const struct sdhci_pci_fixes sdhci_intel_mrst_hc1_hc2 = {
 	.quirks		= SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_NO_HISPD_BIT,
-	.probe		= mrst_hc1_probe,
+	.probe		= mrst_hc_probe,
 };
 
 static const struct sdhci_pci_fixes sdhci_intel_mfd_sd = {
@@ -538,7 +538,15 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
 		.device		= PCI_DEVICE_ID_INTEL_MRST_SD1,
 		.subvendor	= PCI_ANY_ID,
 		.subdevice	= PCI_ANY_ID,
-		.driver_data	= (kernel_ulong_t)&sdhci_intel_mrst_hc1,
+		.driver_data	= (kernel_ulong_t)&sdhci_intel_mrst_hc1_hc2,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_MRST_SD2,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_intel_mrst_hc1_hc2,
 	},
 
 	{
@@ -637,6 +645,7 @@ static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state)
 {
 	struct sdhci_pci_chip *chip;
 	struct sdhci_pci_slot *slot;
+	mmc_pm_flag_t slot_pm_flags;
 	mmc_pm_flag_t pm_flags = 0;
 	int i, ret;
 
@@ -657,7 +666,11 @@ static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state)
 			return ret;
 		}
 
-		pm_flags |= slot->host->mmc->pm_flags;
+		slot_pm_flags = slot->host->mmc->pm_flags;
+		if (slot_pm_flags & MMC_PM_WAKE_SDIO_IRQ)
+			sdhci_enable_irq_wakeups(slot->host);
+
+		pm_flags |= slot_pm_flags;
 	}
 
 	if (chip->fixes && chip->fixes->suspend) {
@@ -671,8 +684,10 @@ static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state)
 
 	pci_save_state(pdev);
 	if (pm_flags & MMC_PM_KEEP_POWER) {
-		if (pm_flags & MMC_PM_WAKE_SDIO_IRQ)
+		if (pm_flags & MMC_PM_WAKE_SDIO_IRQ) {
+			pci_pme_active(pdev, true);
 			pci_enable_wake(pdev, PCI_D3hot, 1);
+		}
 		pci_set_power_state(pdev, PCI_D3hot);
 	} else {
 		pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);

drivers/mmc/host/sdhci-pxa.c

@@ -141,6 +141,10 @@ static int __devinit sdhci_pxa_probe(struct platform_device *pdev)
 	if (pdata->quirks)
 		host->quirks |= pdata->quirks;
 
+	/* If slot design supports 8 bit data, indicate this to MMC. */
+	if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT)
+		host->mmc->caps |= MMC_CAP_8_BIT_DATA;
+
 	ret = sdhci_add_host(host);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to add host\n");

drivers/mmc/host/sdhci.c

@@ -1185,17 +1185,31 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	if (host->ops->platform_send_init_74_clocks)
 		host->ops->platform_send_init_74_clocks(host, ios->power_mode);
 
-	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
-
-	if (ios->bus_width == MMC_BUS_WIDTH_8)
-		ctrl |= SDHCI_CTRL_8BITBUS;
-	else
-		ctrl &= ~SDHCI_CTRL_8BITBUS;
+	/*
+	 * If your platform has 8-bit width support but is not a v3 controller,
+	 * or if it requires special setup code, you should implement that in
+	 * platform_8bit_width().
+	 */
+	if (host->ops->platform_8bit_width)
+		host->ops->platform_8bit_width(host, ios->bus_width);
+	else {
+		ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+		if (ios->bus_width == MMC_BUS_WIDTH_8) {
+			ctrl &= ~SDHCI_CTRL_4BITBUS;
+			if (host->version >= SDHCI_SPEC_300)
+				ctrl |= SDHCI_CTRL_8BITBUS;
+		} else {
+			if (host->version >= SDHCI_SPEC_300)
+				ctrl &= ~SDHCI_CTRL_8BITBUS;
+			if (ios->bus_width == MMC_BUS_WIDTH_4)
+				ctrl |= SDHCI_CTRL_4BITBUS;
+			else
+				ctrl &= ~SDHCI_CTRL_4BITBUS;
+		}
+		sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+	}
 
-	if (ios->bus_width == MMC_BUS_WIDTH_4)
-		ctrl |= SDHCI_CTRL_4BITBUS;
-	else
-		ctrl &= ~SDHCI_CTRL_4BITBUS;
+	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
 
 	if ((ios->timing == MMC_TIMING_SD_HS ||
 	     ios->timing == MMC_TIMING_MMC_HS)
@@ -1681,6 +1695,16 @@ int sdhci_resume_host(struct sdhci_host *host)
 
 EXPORT_SYMBOL_GPL(sdhci_resume_host);
 
+void sdhci_enable_irq_wakeups(struct sdhci_host *host)
+{
+	u8 val;
+	val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL);
+	val |= SDHCI_WAKE_ON_INT;
+	sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
+}
+
+EXPORT_SYMBOL_GPL(sdhci_enable_irq_wakeups);
+
 #endif /* CONFIG_PM */
 
 /*****************************************************************************\
@@ -1845,11 +1869,19 @@ int sdhci_add_host(struct sdhci_host *host)
 		mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300;
 	else
 		mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;
+
 	mmc->f_max = host->max_clk;
 	mmc->caps |= MMC_CAP_SDIO_IRQ;
 
+	/*
+	 * A controller may support 8-bit width, but the board itself
+	 * might not have the pins brought out.  Boards that support
+	 * 8-bit width must set "mmc->caps |= MMC_CAP_8_BIT_DATA;" in
+	 * their platform code before calling sdhci_add_host(), and we
+	 * won't assume 8-bit width for hosts without that CAP.
+	 */
 	if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
-		mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
+		mmc->caps |= MMC_CAP_4_BIT_DATA;
 
 	if (caps & SDHCI_CAN_DO_HISPD)
 		mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;

drivers/mmc/host/sdhci.h

@@ -76,7 +76,7 @@
 #define   SDHCI_CTRL_ADMA1	0x08
 #define   SDHCI_CTRL_ADMA32	0x10
 #define   SDHCI_CTRL_ADMA64	0x18
-#define  SDHCI_CTRL_8BITBUS	0x20
+#define   SDHCI_CTRL_8BITBUS	0x20
 
 #define SDHCI_POWER_CONTROL	0x29
 #define  SDHCI_POWER_ON		0x01
@@ -87,6 +87,9 @@
 #define SDHCI_BLOCK_GAP_CONTROL	0x2A
 
 #define SDHCI_WAKE_UP_CONTROL	0x2B
+#define  SDHCI_WAKE_ON_INT	0x01
+#define  SDHCI_WAKE_ON_INSERT	0x02
+#define  SDHCI_WAKE_ON_REMOVE	0x04
 
 #define SDHCI_CLOCK_CONTROL	0x2C
 #define  SDHCI_DIVIDER_SHIFT	8
@@ -152,6 +155,7 @@
 #define  SDHCI_CLOCK_BASE_SHIFT	8
 #define  SDHCI_MAX_BLOCK_MASK	0x00030000
 #define  SDHCI_MAX_BLOCK_SHIFT  16
+#define  SDHCI_CAN_DO_8BIT	0x00040000
 #define  SDHCI_CAN_DO_ADMA2	0x00080000
 #define  SDHCI_CAN_DO_ADMA1	0x00100000
 #define  SDHCI_CAN_DO_HISPD	0x00200000
@@ -212,6 +216,8 @@ struct sdhci_ops {
 	unsigned int	(*get_max_clock)(struct sdhci_host *host);
 	unsigned int	(*get_min_clock)(struct sdhci_host *host);
 	unsigned int	(*get_timeout_clock)(struct sdhci_host *host);
+	int		(*platform_8bit_width)(struct sdhci_host *host,
+					       int width);
 	void (*platform_send_init_74_clocks)(struct sdhci_host *host,
 					     u8 power_mode);
 	unsigned int    (*get_ro)(struct sdhci_host *host);
@@ -317,6 +323,7 @@ extern void sdhci_remove_host(struct sdhci_host *host, int dead);
 #ifdef CONFIG_PM
 extern int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state);
 extern int sdhci_resume_host(struct sdhci_host *host);
+extern void sdhci_enable_irq_wakeups(struct sdhci_host *host);
 #endif
 
 #endif /* __SDHCI_HW_H */

drivers/mmc/host/ushc.c

@@ -425,7 +425,7 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id
 	struct usb_device *usb_dev = interface_to_usbdev(intf);
 	struct mmc_host *mmc;
 	struct ushc_data *ushc;
-	int ret = -ENOMEM;
+	int ret;
 
 	mmc = mmc_alloc_host(sizeof(struct ushc_data), &intf->dev);
 	if (mmc == NULL)
@@ -462,11 +462,15 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id
 	mmc->max_blk_count = 511;
 
 	ushc->int_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (ushc->int_urb == NULL)
+	if (ushc->int_urb == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	ushc->int_data = kzalloc(sizeof(struct ushc_int_data), GFP_KERNEL);
-	if (ushc->int_data == NULL)
+	if (ushc->int_data == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	usb_fill_int_urb(ushc->int_urb, ushc->usb_dev,
 			 usb_rcvintpipe(usb_dev,
 					intf->cur_altsetting->endpoint[0].desc.bEndpointAddress),
@@ -475,11 +479,15 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id
 			 intf->cur_altsetting->endpoint[0].desc.bInterval);
 
 	ushc->cbw_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (ushc->cbw_urb == NULL)
+	if (ushc->cbw_urb == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	ushc->cbw = kzalloc(sizeof(struct ushc_cbw), GFP_KERNEL);
-	if (ushc->cbw == NULL)
+	if (ushc->cbw == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	ushc->cbw->signature = USHC_CBW_SIGNATURE;
 
 	usb_fill_bulk_urb(ushc->cbw_urb, ushc->usb_dev, usb_sndbulkpipe(usb_dev, 2),
@@ -487,15 +495,21 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id
 			  cbw_callback, ushc);
 
 	ushc->data_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (ushc->data_urb == NULL)
+	if (ushc->data_urb == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 
 	ushc->csw_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (ushc->csw_urb == NULL)
+	if (ushc->csw_urb == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	ushc->csw = kzalloc(sizeof(struct ushc_cbw), GFP_KERNEL);
-	if (ushc->csw == NULL)
+	if (ushc->csw == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	usb_fill_bulk_urb(ushc->csw_urb, ushc->usb_dev, usb_rcvbulkpipe(usb_dev, 6),
 			  ushc->csw, sizeof(struct ushc_csw),
 			  csw_callback, ushc);

drivers/mtd/ubi/scan.c

@@ -787,16 +787,15 @@ static int check_corruption(struct ubi_device *ubi, struct ubi_vid_hdr *vid_hdr,
 		 * erased, so it became unstable and corrupted, and should be
 		 * erased.
 		 */
-		return 0;
+		err = 0;
+		goto out_unlock;
 	}
 
 	if (err)
-		return err;
+		goto out_unlock;
 
-	if (ubi_check_pattern(ubi->peb_buf1, 0xFF, ubi->leb_size)) {
-		mutex_unlock(&ubi->buf_mutex);
-		return 0;
-	}
+	if (ubi_check_pattern(ubi->peb_buf1, 0xFF, ubi->leb_size))
+		goto out_unlock;
 
 	ubi_err("PEB %d contains corrupted VID header, and the data does not "
 		"contain all 0xFF, this may be a non-UBI PEB or a severe VID "
@@ -806,8 +805,11 @@ static int check_corruption(struct ubi_device *ubi, struct ubi_vid_hdr *vid_hdr,
 		pnum, ubi->leb_start, ubi->leb_size);
 	ubi_dbg_print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
 			       ubi->peb_buf1, ubi->leb_size, 1);
+	err = 1;
+
+out_unlock:
 	mutex_unlock(&ubi->buf_mutex);
-	return 1;
+	return err;
 }
 
 /**

drivers/net/Kconfig

@@ -2543,10 +2543,10 @@ config PCH_GBE
 	depends on PCI
 	select MII
 	---help---
-	  This is a gigabit ethernet driver for Topcliff PCH.
-	  Topcliff PCH is the platform controller hub that is used in Intel's
+	  This is a gigabit ethernet driver for EG20T PCH.
+	  EG20T PCH is the platform controller hub that is used in Intel's
 	  general embedded platform.
-	  Topcliff PCH has Gigabit Ethernet interface.
+	  EG20T PCH has Gigabit Ethernet interface.
 	  Using this interface, it is able to access system devices connected
 	  to Gigabit Ethernet.
 	  This driver enables Gigabit Ethernet function.

drivers/net/au1000_eth.c

@@ -155,10 +155,10 @@ static void au1000_enable_mac(struct net_device *dev, int force_reset)
 	spin_lock_irqsave(&aup->lock, flags);
 
 	if (force_reset || (!aup->mac_enabled)) {
-		writel(MAC_EN_CLOCK_ENABLE, &aup->enable);
+		writel(MAC_EN_CLOCK_ENABLE, aup->enable);
 		au_sync_delay(2);
 		writel((MAC_EN_RESET0 | MAC_EN_RESET1 | MAC_EN_RESET2
-				| MAC_EN_CLOCK_ENABLE), &aup->enable);
+				| MAC_EN_CLOCK_ENABLE), aup->enable);
 		au_sync_delay(2);
 
 		aup->mac_enabled = 1;
@@ -503,9 +503,9 @@ static void au1000_reset_mac_unlocked(struct net_device *dev)
 
 	au1000_hard_stop(dev);
 
-	writel(MAC_EN_CLOCK_ENABLE, &aup->enable);
+	writel(MAC_EN_CLOCK_ENABLE, aup->enable);
 	au_sync_delay(2);
-	writel(0, &aup->enable);
+	writel(0, aup->enable);
 	au_sync_delay(2);
 
 	aup->tx_full = 0;
@@ -1119,7 +1119,7 @@ static int __devinit au1000_probe(struct platform_device *pdev)
 	/* set a random MAC now in case platform_data doesn't provide one */
 	random_ether_addr(dev->dev_addr);
 
-	writel(0, &aup->enable);
+	writel(0, aup->enable);
 	aup->mac_enabled = 0;
 
 	pd = pdev->dev.platform_data;

drivers/net/cxgb4vf/cxgb4vf_main.c

@@ -816,40 +816,48 @@ static struct net_device_stats *cxgb4vf_get_stats(struct net_device *dev)
 }
 
 /*
- * Collect up to maxaddrs worth of a netdevice's unicast addresses into an
- * array of addrss pointers and return the number collected.
+ * Collect up to maxaddrs worth of a netdevice's unicast addresses, starting
+ * at a specified offset within the list, into an array of addrss pointers and
+ * return the number collected.
  */
-static inline int collect_netdev_uc_list_addrs(const struct net_device *dev,
-					       const u8 **addr,
-					       unsigned int maxaddrs)
+static inline unsigned int collect_netdev_uc_list_addrs(const struct net_device *dev,
+							const u8 **addr,
+							unsigned int offset,
+							unsigned int maxaddrs)
 {
+	unsigned int index = 0;
 	unsigned int naddr = 0;
 	const struct netdev_hw_addr *ha;
 
-	for_each_dev_addr(dev, ha) {
-		addr[naddr++] = ha->addr;
-		if (naddr >= maxaddrs)
-			break;
-	}
+	for_each_dev_addr(dev, ha)
+		if (index++ >= offset) {
+			addr[naddr++] = ha->addr;
+			if (naddr >= maxaddrs)
+				break;
+		}
 	return naddr;
 }
 
 /*
- * Collect up to maxaddrs worth of a netdevice's multicast addresses into an
- * array of addrss pointers and return the number collected.
+ * Collect up to maxaddrs worth of a netdevice's multicast addresses, starting
+ * at a specified offset within the list, into an array of addrss pointers and
+ * return the number collected.
  */
-static inline int collect_netdev_mc_list_addrs(const struct net_device *dev,
-					       const u8 **addr,
-					       unsigned int maxaddrs)
+static inline unsigned int collect_netdev_mc_list_addrs(const struct net_device *dev,
+							const u8 **addr,
+							unsigned int offset,
+							unsigned int maxaddrs)
 {
+	unsigned int index = 0;
 	unsigned int naddr = 0;
 	const struct netdev_hw_addr *ha;
 
-	netdev_for_each_mc_addr(ha, dev) {
-		addr[naddr++] = ha->addr;
-		if (naddr >= maxaddrs)
-			break;
-	}
+	netdev_for_each_mc_addr(ha, dev)
+		if (index++ >= offset) {
+			addr[naddr++] = ha->addr;
+			if (naddr >= maxaddrs)
+				break;
+		}
 	return naddr;
 }
 
@@ -862,16 +870,20 @@ static int set_addr_filters(const struct net_device *dev, bool sleep)
 	u64 mhash = 0;
 	u64 uhash = 0;
 	bool free = true;
-	u16 filt_idx[7];
+	unsigned int offset, naddr;
 	const u8 *addr[7];
-	int ret, naddr = 0;
+	int ret;
 	const struct port_info *pi = netdev_priv(dev);
 
 	/* first do the secondary unicast addresses */
-	naddr = collect_netdev_uc_list_addrs(dev, addr, ARRAY_SIZE(addr));
-	if (naddr > 0) {
+	for (offset = 0; ; offset += naddr) {
+		naddr = collect_netdev_uc_list_addrs(dev, addr, offset,
+						     ARRAY_SIZE(addr));
+		if (naddr == 0)
+			break;
+
 		ret = t4vf_alloc_mac_filt(pi->adapter, pi->viid, free,
-					  naddr, addr, filt_idx, &uhash, sleep);
+					  naddr, addr, NULL, &uhash, sleep);
 		if (ret < 0)
 			return ret;
 
@@ -879,12 +891,17 @@ static int set_addr_filters(const struct net_device *dev, bool sleep)
 	}
 
 	/* next set up the multicast addresses */
-	naddr = collect_netdev_mc_list_addrs(dev, addr, ARRAY_SIZE(addr));
-	if (naddr > 0) {
+	for (offset = 0; ; offset += naddr) {
+		naddr = collect_netdev_mc_list_addrs(dev, addr, offset,
+						     ARRAY_SIZE(addr));
+		if (naddr == 0)
+			break;
+
 		ret = t4vf_alloc_mac_filt(pi->adapter, pi->viid, free,
-					  naddr, addr, filt_idx, &mhash, sleep);
+					  naddr, addr, NULL, &mhash, sleep);
 		if (ret < 0)
 			return ret;
+		free = false;
 	}
 
 	return t4vf_set_addr_hash(pi->adapter, pi->viid, uhash != 0,

drivers/net/cxgb4vf/t4vf_hw.c

@@ -1014,48 +1014,72 @@ int t4vf_alloc_mac_filt(struct adapter *adapter, unsigned int viid, bool free,
 			unsigned int naddr, const u8 **addr, u16 *idx,
 			u64 *hash, bool sleep_ok)
 {
-	int i, ret;
+	int offset, ret = 0;
+	unsigned nfilters = 0;
+	unsigned int rem = naddr;
 	struct fw_vi_mac_cmd cmd, rpl;
-	struct fw_vi_mac_exact *p;
-	size_t len16;
 
-	if (naddr > ARRAY_SIZE(cmd.u.exact))
+	if (naddr > FW_CLS_TCAM_NUM_ENTRIES)
 		return -EINVAL;
-	len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd,
-				      u.exact[naddr]), 16);
 
-	memset(&cmd, 0, sizeof(cmd));
-	cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_MAC_CMD) |
-				     FW_CMD_REQUEST |
-				     FW_CMD_WRITE |
-				     (free ? FW_CMD_EXEC : 0) |
-				     FW_VI_MAC_CMD_VIID(viid));
-	cmd.freemacs_to_len16 = cpu_to_be32(FW_VI_MAC_CMD_FREEMACS(free) |
-					    FW_CMD_LEN16(len16));
+	for (offset = 0; offset < naddr; /**/) {
+		unsigned int fw_naddr = (rem < ARRAY_SIZE(cmd.u.exact)
+					 ? rem
+					 : ARRAY_SIZE(cmd.u.exact));
+		size_t len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd,
+						     u.exact[fw_naddr]), 16);
+		struct fw_vi_mac_exact *p;
+		int i;
 
-	for (i = 0, p = cmd.u.exact; i < naddr; i++, p++) {
-		p->valid_to_idx =
-			cpu_to_be16(FW_VI_MAC_CMD_VALID |
-				    FW_VI_MAC_CMD_IDX(FW_VI_MAC_ADD_MAC));
-		memcpy(p->macaddr, addr[i], sizeof(p->macaddr));
-	}
+		memset(&cmd, 0, sizeof(cmd));
+		cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_MAC_CMD) |
+					     FW_CMD_REQUEST |
+					     FW_CMD_WRITE |
+					     (free ? FW_CMD_EXEC : 0) |
+					     FW_VI_MAC_CMD_VIID(viid));
+		cmd.freemacs_to_len16 =
+			cpu_to_be32(FW_VI_MAC_CMD_FREEMACS(free) |
+				    FW_CMD_LEN16(len16));
+
+		for (i = 0, p = cmd.u.exact; i < fw_naddr; i++, p++) {
+			p->valid_to_idx = cpu_to_be16(
+				FW_VI_MAC_CMD_VALID |
+				FW_VI_MAC_CMD_IDX(FW_VI_MAC_ADD_MAC));
+			memcpy(p->macaddr, addr[offset+i], sizeof(p->macaddr));
+		}
+
+
+		ret = t4vf_wr_mbox_core(adapter, &cmd, sizeof(cmd), &rpl,
+					sleep_ok);
+		if (ret && ret != -ENOMEM)
+			break;
 
-	ret = t4vf_wr_mbox_core(adapter, &cmd, sizeof(cmd), &rpl, sleep_ok);
-	if (ret)
-		return ret;
-
-	for (i = 0, p = rpl.u.exact; i < naddr; i++, p++) {
-		u16 index = FW_VI_MAC_CMD_IDX_GET(be16_to_cpu(p->valid_to_idx));
-
-		if (idx)
-			idx[i] = (index >= FW_CLS_TCAM_NUM_ENTRIES
-				  ? 0xffff
-				  : index);
-		if (index < FW_CLS_TCAM_NUM_ENTRIES)
-			ret++;
-		else if (hash)
-			*hash |= (1 << hash_mac_addr(addr[i]));
+		for (i = 0, p = rpl.u.exact; i < fw_naddr; i++, p++) {
+			u16 index = FW_VI_MAC_CMD_IDX_GET(
+				be16_to_cpu(p->valid_to_idx));
+
+			if (idx)
+				idx[offset+i] =
+					(index >= FW_CLS_TCAM_NUM_ENTRIES
+					 ? 0xffff
+					 : index);
+			if (index < FW_CLS_TCAM_NUM_ENTRIES)
+				nfilters++;
+			else if (hash)
+				*hash |= (1ULL << hash_mac_addr(addr[offset+i]));
+		}
+
+		free = false;
+		offset += fw_naddr;
+		rem -= fw_naddr;
 	}
+
+	/*
+	 * If there were no errors or we merely ran out of room in our MAC
+	 * address arena, return the number of filters actually written.
+	 */
+	if (ret == 0 || ret == -ENOMEM)
+		ret = nfilters;
 	return ret;
 }
 

drivers/net/ehea/ehea_main.c

@@ -400,6 +400,7 @@ static void ehea_refill_rq1(struct ehea_port_res *pr, int index, int nr_of_wqes)
 			skb_arr_rq1[index] = netdev_alloc_skb(dev,
 							      EHEA_L_PKT_SIZE);
 			if (!skb_arr_rq1[index]) {
+				ehea_info("Unable to allocate enough skb in the array\n");
 				pr->rq1_skba.os_skbs = fill_wqes - i;
 				break;
 			}
@@ -422,13 +423,20 @@ static void ehea_init_fill_rq1(struct ehea_port_res *pr, int nr_rq1a)
 	struct net_device *dev = pr->port->netdev;
 	int i;
 
-	for (i = 0; i < pr->rq1_skba.len; i++) {
+	if (nr_rq1a > pr->rq1_skba.len) {
+		ehea_error("NR_RQ1A bigger than skb array len\n");
+		return;
+	}
+
+	for (i = 0; i < nr_rq1a; i++) {
 		skb_arr_rq1[i] = netdev_alloc_skb(dev, EHEA_L_PKT_SIZE);
-		if (!skb_arr_rq1[i])
+		if (!skb_arr_rq1[i]) {
+			ehea_info("No enough memory to allocate skb array\n");
 			break;
+		}
 	}
 	/* Ring doorbell */
-	ehea_update_rq1a(pr->qp, nr_rq1a);
+	ehea_update_rq1a(pr->qp, i);
 }
 
 static int ehea_refill_rq_def(struct ehea_port_res *pr,
@@ -735,8 +743,10 @@ static int ehea_proc_rwqes(struct net_device *dev,
 
 					skb = netdev_alloc_skb(dev,
 							       EHEA_L_PKT_SIZE);
-					if (!skb)
+					if (!skb) {
+						ehea_info("Not enough memory to allocate skb\n");
 						break;
+					}
 				}
 				skb_copy_to_linear_data(skb, ((char *)cqe) + 64,
 						 cqe->num_bytes_transfered - 4);

drivers/net/pch_gbe/pch_gbe_main.c

@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 1999 - 2010 Intel Corporation.
- * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
+ * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
  *
  * This code was derived from the Intel e1000e Linux driver.
  *
@@ -2464,8 +2464,8 @@ static void __exit pch_gbe_exit_module(void)
 module_init(pch_gbe_init_module);
 module_exit(pch_gbe_exit_module);
 
-MODULE_DESCRIPTION("OKI semiconductor PCH Gigabit ethernet Driver");
-MODULE_AUTHOR("OKI semiconductor, <masa-korg@dsn.okisemi.com>");
+MODULE_DESCRIPTION("EG20T PCH Gigabit ethernet Driver");
+MODULE_AUTHOR("OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com>");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 MODULE_DEVICE_TABLE(pci, pch_gbe_pcidev_id);

drivers/net/pch_gbe/pch_gbe_param.c

@@ -434,8 +434,8 @@ void pch_gbe_check_options(struct pch_gbe_adapter *adapter)
 			.err  = "using default of "
 				__MODULE_STRING(PCH_GBE_DEFAULT_TXD),
 			.def  = PCH_GBE_DEFAULT_TXD,
-			.arg  = { .r = { .min = PCH_GBE_MIN_TXD } },
-			.arg  = { .r = { .max = PCH_GBE_MAX_TXD } }
+			.arg  = { .r = { .min = PCH_GBE_MIN_TXD,
+					 .max = PCH_GBE_MAX_TXD } }
 		};
 		struct pch_gbe_tx_ring *tx_ring = adapter->tx_ring;
 		tx_ring->count = TxDescriptors;
@@ -450,8 +450,8 @@ void pch_gbe_check_options(struct pch_gbe_adapter *adapter)
 			.err  = "using default of "
 				__MODULE_STRING(PCH_GBE_DEFAULT_RXD),
 			.def  = PCH_GBE_DEFAULT_RXD,
-			.arg  = { .r = { .min = PCH_GBE_MIN_RXD } },
-			.arg  = { .r = { .max = PCH_GBE_MAX_RXD } }
+			.arg  = { .r = { .min = PCH_GBE_MIN_RXD,
+					 .max = PCH_GBE_MAX_RXD } }
 		};
 		struct pch_gbe_rx_ring *rx_ring = adapter->rx_ring;
 		rx_ring->count = RxDescriptors;

drivers/net/ppp_generic.c

@@ -2584,16 +2584,16 @@ ppp_create_interface(struct net *net, int unit, int *retp)
 	 */
 	dev_net_set(dev, net);
 
-	ret = -EEXIST;
 	mutex_lock(&pn->all_ppp_mutex);
 
 	if (unit < 0) {
 		unit = unit_get(&pn->units_idr, ppp);
 		if (unit < 0) {
-			*retp = unit;
+			ret = unit;
 			goto out2;
 		}
 	} else {
+		ret = -EEXIST;
 		if (unit_find(&pn->units_idr, unit))
 			goto out2; /* unit already exists */
 		/*
@@ -2668,10 +2668,10 @@ static void ppp_shutdown_interface(struct ppp *ppp)
 		ppp->closing = 1;
 		ppp_unlock(ppp);
 		unregister_netdev(ppp->dev);
+		unit_put(&pn->units_idr, ppp->file.index);
 	} else
 		ppp_unlock(ppp);
 
-	unit_put(&pn->units_idr, ppp->file.index);
 	ppp->file.dead = 1;
 	ppp->owner = NULL;
 	wake_up_interruptible(&ppp->file.rwait);
@@ -2859,8 +2859,7 @@ static void __exit ppp_cleanup(void)
  * by holding all_ppp_mutex
  */
 
-/* associate pointer with specified number */
-static int unit_set(struct idr *p, void *ptr, int n)
+static int __unit_alloc(struct idr *p, void *ptr, int n)
 {
 	int unit, err;
 
@@ -2871,10 +2870,24 @@ again:
 	}
 
 	err = idr_get_new_above(p, ptr, n, &unit);
-	if (err == -EAGAIN)
-		goto again;
+	if (err < 0) {
+		if (err == -EAGAIN)
+			goto again;
+		return err;
+	}
+
+	return unit;
+}
+
+/* associate pointer with specified number */
+static int unit_set(struct idr *p, void *ptr, int n)
+{
+	int unit;
 
-	if (unit != n) {
+	unit = __unit_alloc(p, ptr, n);
+	if (unit < 0)
+		return unit;
+	else if (unit != n) {
 		idr_remove(p, unit);
 		return -EINVAL;
 	}
@@ -2885,19 +2898,7 @@ again:
 /* get new free unit number and associate pointer with it */
 static int unit_get(struct idr *p, void *ptr)
 {
-	int unit, err;
-
-again:
-	if (!idr_pre_get(p, GFP_KERNEL)) {
-		printk(KERN_ERR "PPP: No free memory for idr\n");
-		return -ENOMEM;
-	}
-
-	err = idr_get_new_above(p, ptr, 0, &unit);
-	if (err == -EAGAIN)
-		goto again;
-
-	return unit;
+	return __unit_alloc(p, ptr, 0);
 }
 
 /* put unit number back to a pool */

drivers/net/ucc_geth.h

@@ -899,7 +899,8 @@ struct ucc_geth_hardware_statistics {
 #define UCC_GETH_UTFS_INIT                      512	/* Tx virtual FIFO size
 							 */
 #define UCC_GETH_UTFET_INIT                     256	/* 1/2 utfs */
-#define UCC_GETH_UTFTT_INIT                     512
+#define UCC_GETH_UTFTT_INIT                     256	/* 1/2 utfs
+							   due to errata */
 /* Gigabit Ethernet (1000 Mbps) */
 #define UCC_GETH_URFS_GIGA_INIT                 4096/*2048*/	/* Rx virtual
 								   FIFO size */

drivers/net/usb/hso.c

@@ -2994,12 +2994,14 @@ static int hso_probe(struct usb_interface *interface,
 
 	case HSO_INTF_BULK:
 		/* It's a regular bulk interface */
-		if (((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) &&
-		    !disable_net)
-			hso_dev = hso_create_net_device(interface, port_spec);
-		else
+		if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
+			if (!disable_net)
+				hso_dev =
+				    hso_create_net_device(interface, port_spec);
+		} else {
 			hso_dev =
 			    hso_create_bulk_serial_device(interface, port_spec);
+		}
 		if (!hso_dev)
 			goto exit;
 		break;

drivers/net/wan/x25_asy.c

@@ -498,7 +498,6 @@ norbuff:
 static int x25_asy_close(struct net_device *dev)
 {
 	struct x25_asy *sl = netdev_priv(dev);
-	int err;
 
 	spin_lock(&sl->lock);
 	if (sl->tty)
@@ -507,10 +506,6 @@ static int x25_asy_close(struct net_device *dev)
 	netif_stop_queue(dev);
 	sl->rcount = 0;
 	sl->xleft  = 0;
-	err = lapb_unregister(dev);
-	if (err != LAPB_OK)
-		printk(KERN_ERR "x25_asy_close: lapb_unregister error -%d\n",
-			err);
 	spin_unlock(&sl->lock);
 	return 0;
 }
@@ -595,6 +590,7 @@ static int x25_asy_open_tty(struct tty_struct *tty)
 static void x25_asy_close_tty(struct tty_struct *tty)
 {
 	struct x25_asy *sl = tty->disc_data;
+	int err;
 
 	/* First make sure we're connected. */
 	if (!sl || sl->magic != X25_ASY_MAGIC)
@@ -605,6 +601,11 @@ static void x25_asy_close_tty(struct tty_struct *tty)
 		dev_close(sl->dev);
 	rtnl_unlock();
 
+	err = lapb_unregister(sl->dev);
+	if (err != LAPB_OK)
+		printk(KERN_ERR "x25_asy_close: lapb_unregister error -%d\n",
+			err);
+
 	tty->disc_data = NULL;
 	sl->tty = NULL;
 	x25_asy_free(sl);

drivers/net/wireless/ath/ath9k/recv.c

@@ -518,7 +518,7 @@ bool ath_stoprecv(struct ath_softc *sc)
 	bool stopped;
 
 	spin_lock_bh(&sc->rx.rxbuflock);
-	ath9k_hw_stoppcurecv(ah);
+	ath9k_hw_abortpcurecv(ah);
 	ath9k_hw_setrxfilter(ah, 0);
 	stopped = ath9k_hw_stopdmarecv(ah);
 

drivers/net/wireless/ath/carl9170/main.c

@@ -647,7 +647,7 @@ init:
 	}
 
 unlock:
-	if (err && (vif_id != -1)) {
+	if (err && (vif_id >= 0)) {
 		vif_priv->active = false;
 		bitmap_release_region(&ar->vif_bitmap, vif_id, 0);
 		ar->vifs--;