powerpc/qe: Update the SNUM table for MPC8569 Rev2.0

The MPC8569 Rev2.0 has the correct SNUM table as QE Reference Manual, we
must follow it.

However the Rev1.0 silicon need the old SNUM table as workaround due to
Rev1.0 silicon SNUM erratum.

So, we support both snum table, and choose the one FDT tell us.
And u-boot will fixup FDT according to SPRN_SVR.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

arch/powerpc/sysdev/qe_lib/qe.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ * Copyright (C) 2006-2010 Freescale Semicondutor, Inc. All rights reserved.
  *
  * Authors: 	Shlomi Gridish <gridish@freescale.com>
  * 		Li Yang <leoli@freescale.com>
@@ -266,7 +266,19 @@ EXPORT_SYMBOL(qe_clock_source);
 static void qe_snums_init(void)
 {
 	int i;
-	static const u8 snum_init[] = {
+	static const u8 snum_init_76[] = {
+		0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
+		0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
+		0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
+		0xD8, 0xD9, 0xE8, 0xE9, 0x44, 0x45, 0x4C, 0x4D,
+		0x54, 0x55, 0x5C, 0x5D, 0x64, 0x65, 0x6C, 0x6D,
+		0x74, 0x75, 0x7C, 0x7D, 0x84, 0x85, 0x8C, 0x8D,
+		0x94, 0x95, 0x9C, 0x9D, 0xA4, 0xA5, 0xAC, 0xAD,
+		0xB4, 0xB5, 0xBC, 0xBD, 0xC4, 0xC5, 0xCC, 0xCD,
+		0xD4, 0xD5, 0xDC, 0xDD, 0xE4, 0xE5, 0xEC, 0xED,
+		0xF4, 0xF5, 0xFC, 0xFD,
+	};
+	static const u8 snum_init_46[] = {
 		0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
 		0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
 		0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
@@ -274,9 +286,15 @@ static void qe_snums_init(void)
 		0x28, 0x29, 0x38, 0x39, 0x48, 0x49, 0x58, 0x59,
 		0x68, 0x69, 0x78, 0x79, 0x80, 0x81,
 	};
+	static const u8 *snum_init;
 
 	qe_num_of_snum = qe_get_num_of_snums();
 
+	if (qe_num_of_snum == 76)
+		snum_init = snum_init_76;
+	else
+		snum_init = snum_init_46;
+
 	for (i = 0; i < qe_num_of_snum; i++) {
 		snums[i].num = snum_init[i];
 		snums[i].state = QE_SNUM_STATE_FREE;

drivers/net/ethernet/freescale/ucc_geth.c

@@ -3945,6 +3945,8 @@ static int ucc_geth_probe(struct platform_device* ofdev)
 		}
 
 	if (max_speed == SPEED_1000) {
+		unsigned int snums = qe_get_num_of_snums();
+
 		/* configure muram FIFOs for gigabit operation */
 		ug_info->uf_info.urfs = UCC_GETH_URFS_GIGA_INIT;
 		ug_info->uf_info.urfet = UCC_GETH_URFET_GIGA_INIT;
@@ -3954,11 +3956,11 @@ static int ucc_geth_probe(struct platform_device* ofdev)
 		ug_info->uf_info.utftt = UCC_GETH_UTFTT_GIGA_INIT;
 		ug_info->numThreadsTx = UCC_GETH_NUM_OF_THREADS_4;
 
-		/* If QE's snum number is 46 which means we need to support
+		/* If QE's snum number is 46/76 which means we need to support
 		 * 4 UECs at 1000Base-T simultaneously, we need to allocate
 		 * more Threads to Rx.
 		 */
-		if (qe_get_num_of_snums() == 46)
+		if ((snums == 76) || (snums == 46))
 			ug_info->numThreadsRx = UCC_GETH_NUM_OF_THREADS_6;
 		else
 			ug_info->numThreadsRx = UCC_GETH_NUM_OF_THREADS_4;