Merge /spare/repo/linux-2.6/

CREDITS

@@ -2475,13 +2475,9 @@ S: Potsdam, New York 13676
 S: USA
 
 N: Dave Neuer
-E: dneuer@innovation-charter.com
-E: mr_fred_smoothie@yahoo.com
+E: dave.neuer@pobox.com
 D: Helped implement support for Compaq's H31xx series iPAQs
 D: Other mostly minor tweaks & bugfixes
-S: 325 E. Main St., Suite 3
-S: Carnegie, PA 15105
-S: USA
 
 N: Michael Neuffer
 E: mike@i-Connect.Net

Documentation/SubmittingPatches

@@ -271,7 +271,7 @@ patch, which certifies that you wrote it or otherwise have the right to
 pass it on as a open-source patch.  The rules are pretty simple: if you
 can certify the below:
 
-        Developer's Certificate of Origin 1.0
+        Developer's Certificate of Origin 1.1
 
         By making a contribution to this project, I certify that:
 
@@ -291,6 +291,12 @@ can certify the below:
             person who certified (a), (b) or (c) and I have not modified
             it.
 
+	(d) I understand and agree that this project and the contribution
+	    are public and that a record of the contribution (including all
+	    personal information I submit with it, including my sign-off) is
+	    maintained indefinitely and may be redistributed consistent with
+	    this project or the open source license(s) involved.
+
 then you just add a line saying
 
 	Signed-off-by: Random J Developer <random@developer.org>

Documentation/networking/vortex.txt

@@ -12,7 +12,7 @@ Don is no longer the prime maintainer of this version of the driver.
 Please report problems to one or more of:
 
   Andrew Morton <andrewm@uow.edu.au>
-  Netdev mailing list <netdev@oss.sgi.com>
+  Netdev mailing list <netdev@vger.kernel.org>
   Linux kernel mailing list <linux-kernel@vger.kernel.org>
 
 Please note the 'Reporting and Diagnosing Problems' section at the end

MAINTAINERS

@@ -73,7 +73,7 @@ S: Status, one of the following:
 3C359 NETWORK DRIVER
 P:	Mike Phillips
 M:	mikep@linuxtr.net
-L:	netdev@oss.sgi.com
+L:	netdev@vger.kernel.org
 L:	linux-tr@linuxtr.net
 W:	http://www.linuxtr.net
 S:	Maintained
@@ -81,13 +81,13 @@ S:	Maintained
 3C505 NETWORK DRIVER
 P:	Philip Blundell
 M:	philb@gnu.org
-L:	netdev@oss.sgi.com
+L:	netdev@vger.kernel.org
 S:	Maintained
 
 3CR990 NETWORK DRIVER
 P:	David Dillow
 M:	dave@thedillows.org
-L:	netdev@oss.sgi.com
+L:	netdev@vger.kernel.org
 S:	Maintained
 
 3W-XXXX ATA-RAID CONTROLLER DRIVER
@@ -130,7 +130,7 @@ S:	Maintained
 8169 10/100/1000 GIGABIT ETHERNET DRIVER
 P:	Francois Romieu
 M:	romieu@fr.zoreil.com
-L:	netdev@oss.sgi.com
+L:	netdev@vger.kernel.org
 S:	Maintained
 
 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
@@ -143,7 +143,7 @@ S:	Maintained
 8390 NETWORK DRIVERS [WD80x3/SMC-ELITE, SMC-ULTRA, NE2000, 3C503, etc.]
 P:	Paul Gortmaker
 M:	p_gortmaker@yahoo.com
-L:	netdev@oss.sgi.com
+L:	netdev@vger.kernel.org
 S:	Maintained
 
 A2232 SERIAL BOARD DRIVER
@@ -332,7 +332,7 @@ S:	Maintained
 
 ARPD SUPPORT
 P:	Jonathan Layes
-L:	netdev@oss.sgi.com
+L:	netdev@vger.kernel.org
 S:	Maintained
 
 ASUS ACPI EXTRAS DRIVER
@@ -706,7 +706,7 @@ S:	Orphaned
 
 DIGI RIGHTSWITCH NETWORK DRIVER
 P:	Rick Richardson
-L:	netdev@oss.sgi.com
+L:	netdev@vger.kernel.org
 W:	http://www.digi.com
 S:	Orphaned
 
@@ -812,7 +812,7 @@ S:	Maintained
 ETHEREXPRESS-16 NETWORK DRIVER
 P:	Philip Blundell
 M:	philb@gnu.org
-L:	netdev@oss.sgi.com
+L:	netdev@vger.kernel.org
 S:	Maintained
 
 ETHERNET BRIDGE
@@ -875,7 +875,7 @@ S:	Maintained
 FRAME RELAY DLCI/FRAD (Sangoma drivers too)
 P:	Mike McLagan
 M:	mike.mclagan@linux.org
-L:	netdev@oss.sgi.com
+L:	netdev@vger.kernel.org
 S:	Maintained
 
 FREEVXFS FILESYSTEM
@@ -1215,7 +1215,7 @@ S:	Maintained
 IPX NETWORK LAYER
 P:	Arnaldo Carvalho de Melo
 M:	acme@conectiva.com.br
-L:	netdev@oss.sgi.com
+L:	netdev@vger.kernel.org
 S:	Maintained
 
 IRDA SUBSYSTEM
@@ -1482,7 +1482,7 @@ MARVELL MV64340 ETHERNET DRIVER
 P:	Manish Lachwani
 M:	Manish_Lachwani@pmc-sierra.com
 L:	linux-mips@linux-mips.org
-L:	netdev@oss.sgi.com
+L:	netdev@vger.kernel.org
 S:	Supported
 
 MATROX FRAMEBUFFER DRIVER
@@ -1592,13 +1592,13 @@ P:	Andrew Morton
 M:	akpm@osdl.org
 P:	Jeff Garzik
 M:	jgarzik@pobox.com
-L:	netdev@oss.sgi.com
+L:	netdev@vger.kernel.org
 S:	Maintained
 
 NETWORKING [GENERAL]
 P:	Networking Team
-M:	netdev@oss.sgi.com
-L:	netdev@oss.sgi.com
+M:	netdev@vger.kernel.org
+L:	netdev@vger.kernel.org
 S:	Maintained
 
 NETWORKING [IPv4/IPv6]
@@ -1614,7 +1614,7 @@ P:	Hideaki YOSHIFUJI
 M:	yoshfuji@linux-ipv6.org
 P:	Patrick McHardy
 M:	kaber@coreworks.de
-L:	netdev@oss.sgi.com
+L:	netdev@vger.kernel.org
 S:	Maintained
 
 IPVS
@@ -1634,7 +1634,7 @@ NI5010 NETWORK DRIVER
 P:	Jan-Pascal van Best and Andreas Mohr
 M:	Jan-Pascal van Best <jvbest@qv3pluto.leidenuniv.nl>
 M:	Andreas Mohr <100.30936@germany.net>
-L:	netdev@oss.sgi.com
+L:	netdev@vger.kernel.org
 S:	Maintained
 
 NINJA SCSI-3 / NINJA SCSI-32Bi (16bit/CardBus) PCMCIA SCSI HOST ADAPTER DRIVER
@@ -1676,7 +1676,7 @@ P:	Peter De Shrijver
 M:	p2@ace.ulyssis.student.kuleuven.ac.be
 P:	Mike Phillips
 M:	mikep@linuxtr.net 
-L:	netdev@oss.sgi.com
+L:	netdev@vger.kernel.org
 L:	linux-tr@linuxtr.net
 W:	http://www.linuxtr.net
 S:	Maintained
@@ -1783,7 +1783,7 @@ S:	Unmaintained
 PCNET32 NETWORK DRIVER
 P:	Thomas Bogendörfer
 M:	tsbogend@alpha.franken.de
-L:	netdev@oss.sgi.com
+L:	netdev@vger.kernel.org
 S:	Maintained
 
 PHRAM MTD DRIVER
@@ -1795,7 +1795,7 @@ S:	Maintained
 POSIX CLOCKS and TIMERS
 P:	George Anzinger
 M:	george@mvista.com
-L:	netdev@oss.sgi.com
+L:	netdev@vger.kernel.org
 S:	Supported
 
 PNP SUPPORT
@@ -1830,7 +1830,7 @@ S:	Supported
 PRISM54 WIRELESS DRIVER
 P:	Prism54 Development Team
 M:	prism54-private@prism54.org
-L:	netdev@oss.sgi.com
+L:	netdev@vger.kernel.org
 W:	http://prism54.org
 S:	Maintained
 
@@ -2047,7 +2047,7 @@ SIS 900/7016 FAST ETHERNET DRIVER
 P:	Daniele Venzano
 M:	venza@brownhat.org
 W:	http://www.brownhat.org/sis900.html
-L:	netdev@oss.sgi.com
+L:	netdev@vger.kernel.org
 S:	Maintained
 
 SIS FRAMEBUFFER DRIVER
@@ -2106,7 +2106,7 @@ S:	Maintained
 SONIC NETWORK DRIVER
 P:	Thomas Bogendoerfer
 M:	tsbogend@alpha.franken.de
-L:	netdev@oss.sgi.com
+L:	netdev@vger.kernel.org
 S:	Maintained
 
 SONY VAIO CONTROL DEVICE DRIVER
@@ -2163,7 +2163,7 @@ S:	Supported
 SPX NETWORK LAYER
 P:	Jay Schulist
 M:	jschlst@samba.org
-L:	netdev@oss.sgi.com
+L:	netdev@vger.kernel.org
 S:	Supported
 
 SRM (Alpha) environment access
@@ -2242,7 +2242,7 @@ S:	Maintained
 TOKEN-RING NETWORK DRIVER
 P:	Mike Phillips
 M:	mikep@linuxtr.net
-L:	netdev@oss.sgi.com
+L:	netdev@vger.kernel.org
 L:	linux-tr@linuxtr.net
 W:	http://www.linuxtr.net
 S:	Maintained

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 12
-EXTRAVERSION =-rc5
+EXTRAVERSION =
 NAME=Woozy Numbat
 
 # *DOCUMENTATION*

arch/arm/Kconfig

@@ -497,7 +497,7 @@ source "drivers/cpufreq/Kconfig"
 
 config CPU_FREQ_SA1100
 	bool
-	depends on CPU_FREQ && (SA1100_LART || SA1100_PLEB)
+	depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_H3800 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT)
 	default y
 
 config CPU_FREQ_SA1110
@@ -689,7 +689,9 @@ source "drivers/block/Kconfig"
 
 source "drivers/acorn/block/Kconfig"
 
-if ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE
+if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \
+	|| ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
+	|| ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE
 source "drivers/ide/Kconfig"
 endif
 

arch/arm/boot/compressed/head-xscale.S

@@ -47,3 +47,10 @@ __XScale_start:
                orr     r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00)
 #endif
 
+#ifdef CONFIG_ARCH_IXP2000
+		mov	r1, #-1
+		mov	r0, #0xd6000000
+		str	r1, [r0, #0x14]
+		str	r1, [r0, #0x18]
+#endif
+

arch/arm/configs/badge4_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sat Mar 26 21:32:26 2005
+# Linux kernel version: 2.6.12-rc6-git3
+# Thu Jun  9 19:00:50 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -16,6 +16,7 @@ CONFIG_GENERIC_IOMAP=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -34,6 +35,8 @@ CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -109,7 +112,6 @@ CONFIG_CPU_ABRT_EV4=y
 CONFIG_CPU_CACHE_V4WB=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
 
 #
 # Processor Features
@@ -122,6 +124,7 @@ CONFIG_FORCE_MAX_ZONEORDER=9
 # Bus support
 #
 CONFIG_ISA=y
+CONFIG_ISA_DMA_API=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -131,6 +134,7 @@ CONFIG_ISA=y
 #
 # Kernel Features
 #
+# CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
 CONFIG_DISCONTIGMEM=y
 # CONFIG_LEDS is not set
@@ -152,12 +156,14 @@ CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_DEBUG is not set
 CONFIG_CPU_FREQ_STAT=y
 # CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
 # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_SA1100=y
 
 #
 # Floating point emulation
@@ -294,7 +300,6 @@ CONFIG_PARPORT_NOT_PC=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_XD is not set
 # CONFIG_PARIDE is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
@@ -428,7 +433,6 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -526,6 +530,7 @@ CONFIG_IRDA_ULTRA=y
 # CONFIG_SMC_IRCC_FIR is not set
 # CONFIG_ALI_FIR is not set
 CONFIG_SA1100_FIR=y
+# CONFIG_VIA_FIR is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
 # CONFIG_BT_SCO is not set
@@ -618,7 +623,6 @@ CONFIG_NET_WIRELESS=y
 #
 # CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices
@@ -687,7 +691,6 @@ CONFIG_RTC=m
 #
 # TPM devices
 #
-# CONFIG_TCG_TPM is not set
 
 #
 # I2C support
@@ -736,6 +739,7 @@ CONFIG_I2C_ELEKTOR=m
 # CONFIG_SENSORS_LM85 is not set
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
@@ -747,6 +751,7 @@ CONFIG_I2C_ELEKTOR=m
 #
 # Other I2C Chip support
 #
+# CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -871,7 +876,6 @@ CONFIG_USB_PRINTER=m
 #
 CONFIG_USB_STORAGE=y
 CONFIG_USB_STORAGE_DEBUG=y
-# CONFIG_USB_STORAGE_RW_DETECT is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
@@ -954,9 +958,11 @@ CONFIG_USB_USS720=m
 #
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRPRIME is not set
 CONFIG_USB_SERIAL_BELKIN=m
 CONFIG_USB_SERIAL_WHITEHEAT=m
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
 # CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
@@ -985,6 +991,7 @@ CONFIG_USB_SERIAL_KEYSPAN=m
 # CONFIG_USB_SERIAL_KOBIL_SCT is not set
 CONFIG_USB_SERIAL_MCT_U232=m
 CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
 # CONFIG_USB_SERIAL_TI is not set
 CONFIG_USB_SERIAL_CYBERJACK=m

arch/arm/configs/h3600_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:02:26 2005
+# Linux kernel version: 2.6.12-rc4
+# Thu Jun  9 01:59:03 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -16,6 +16,7 @@ CONFIG_GENERIC_IOMAP=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -33,6 +34,8 @@ CONFIG_KOBJECT_UEVENT=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -120,6 +123,7 @@ CONFIG_CPU_MINICACHE=y
 # Bus support
 #
 CONFIG_ISA=y
+CONFIG_ISA_DMA_API=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -138,6 +142,7 @@ CONFIG_PCMCIA_SA1100=y
 #
 # Kernel Features
 #
+# CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
 CONFIG_DISCONTIGMEM=y
 # CONFIG_LEDS is not set
@@ -159,12 +164,13 @@ CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_DEBUG is not set
 CONFIG_CPU_FREQ_STAT=y
 # CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
 # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
 # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_SA1100=y
 
 #
 # Floating point emulation
@@ -298,7 +304,6 @@ CONFIG_MTD_SA1100=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_XD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
@@ -379,7 +384,6 @@ CONFIG_NET=y
 # Networking options
 #
 # CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -476,6 +480,7 @@ CONFIG_IRCOMM=m
 # CONFIG_SMC_IRCC_FIR is not set
 # CONFIG_ALI_FIR is not set
 CONFIG_SA1100_FIR=m
+# CONFIG_VIA_FIR is not set
 # CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
@@ -647,7 +652,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # TPM devices
 #
-# CONFIG_TCG_TPM is not set
 
 #
 # I2C support
@@ -676,9 +680,11 @@ CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_SA1100=y
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #

arch/arm/configs/hackkit_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:22:34 2005
+# Linux kernel version: 2.6.12-rc6-git3
+# Thu Jun  9 20:58:58 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -16,6 +16,7 @@ CONFIG_GENERIC_IOMAP=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -34,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -109,7 +112,6 @@ CONFIG_CPU_ABRT_EV4=y
 CONFIG_CPU_CACHE_V4WB=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
 
 #
 # Processor Features
@@ -119,6 +121,7 @@ CONFIG_CPU_MINICACHE=y
 # Bus support
 #
 CONFIG_ISA=y
+CONFIG_ISA_DMA_API=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -128,6 +131,7 @@ CONFIG_ISA=y
 #
 # Kernel Features
 #
+# CONFIG_SMP is not set
 # CONFIG_PREEMPT is not set
 CONFIG_DISCONTIGMEM=y
 CONFIG_LEDS=y
@@ -151,12 +155,14 @@ CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_DEBUG is not set
 CONFIG_CPU_FREQ_STAT=y
 # CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
 # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_SA1100=y
 
 #
 # Floating point emulation
@@ -280,7 +286,6 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_XD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
@@ -338,7 +343,6 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -484,7 +488,6 @@ CONFIG_SERIO=y
 CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices
@@ -533,7 +536,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # TPM devices
 #
-# CONFIG_TCG_TPM is not set
 
 #
 # I2C support

arch/arm/kernel/entry-armv.S

@@ -269,7 +269,7 @@ __pabt_svc:
 	add	r5, sp, #S_PC
 	ldmia	r7, {r2 - r4}			@ Get USR pc, cpsr
 
-#if __LINUX_ARM_ARCH__ < 6
+#if __LINUX_ARM_ARCH__ < 6 && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
 	@ make sure our user space atomic helper is aborted
 	cmp	r2, #VIRT_OFFSET
 	bichs	r3, r3, #PSR_Z_BIT
@@ -616,11 +616,17 @@ __kuser_helper_start:
 
 __kuser_cmpxchg:				@ 0xffff0fc0
 
-#if __LINUX_ARM_ARCH__ < 6
+#if defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
 
-#ifdef CONFIG_SMP  /* sanity check */
-#error "CONFIG_SMP on a machine supporting pre-ARMv6 processors?"
-#endif
+	/*
+	 * Poor you.  No fast solution possible...
+	 * The kernel itself must perform the operation.
+	 * A special ghost syscall is used for that (see traps.c).
+	 */
+	swi	#0x9ffff0
+	mov	pc, lr
+
+#elif __LINUX_ARM_ARCH__ < 6
 
 	/*
 	 * Theory of operation:

arch/arm/kernel/traps.c

@@ -464,6 +464,55 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
 #endif
 		return 0;
 
+#ifdef CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG
+	/*
+	 * Atomically store r1 in *r2 if *r2 is equal to r0 for user space.
+	 * Return zero in r0 if *MEM was changed or non-zero if no exchange
+	 * happened.  Also set the user C flag accordingly.
+	 * If access permissions have to be fixed up then non-zero is
+	 * returned and the operation has to be re-attempted.
+	 *
+	 * *NOTE*: This is a ghost syscall private to the kernel.  Only the
+	 * __kuser_cmpxchg code in entry-armv.S should be aware of its
+	 * existence.  Don't ever use this from user code.
+	 */
+	case 0xfff0:
+	{
+		extern void do_DataAbort(unsigned long addr, unsigned int fsr,
+					 struct pt_regs *regs);
+		unsigned long val;
+		unsigned long addr = regs->ARM_r2;
+		struct mm_struct *mm = current->mm;
+		pgd_t *pgd; pmd_t *pmd; pte_t *pte;
+
+		regs->ARM_cpsr &= ~PSR_C_BIT;
+		spin_lock(&mm->page_table_lock);
+		pgd = pgd_offset(mm, addr);
+		if (!pgd_present(*pgd))
+			goto bad_access;
+		pmd = pmd_offset(pgd, addr);
+		if (!pmd_present(*pmd))
+			goto bad_access;
+		pte = pte_offset_map(pmd, addr);
+		if (!pte_present(*pte) || !pte_write(*pte))
+			goto bad_access;
+		val = *(unsigned long *)addr;
+		val -= regs->ARM_r0;
+		if (val == 0) {
+			*(unsigned long *)addr = regs->ARM_r1;
+			regs->ARM_cpsr |= PSR_C_BIT;
+		}
+		spin_unlock(&mm->page_table_lock);
+		return val;
+
+		bad_access:
+		spin_unlock(&mm->page_table_lock);
+		/* simulate a read access fault */
+		do_DataAbort(addr, 15 + (1 << 11), regs);
+		return -1;
+	}
+#endif
+
 	default:
 		/* Calls 9f00xx..9f07ff are defined to return -ENOSYS
 		   if not implemented, rather than raising SIGILL.  This

arch/arm/lib/io-writesw-armv4.S

@@ -87,9 +87,9 @@ ENTRY(__raw_writesw)
 		subs	r2, r2, #2
 		orr	ip, ip, r3, push_hbyte1
 		strh	ip, [r0]
-		bpl	2b
+		bpl	1b
 
-3:		tst	r2, #1
-2:		movne	ip, r3, lsr #8
+		tst	r2, #1
+3:		movne	ip, r3, lsr #8
 		strneh	ip, [r0]
 		mov	pc, lr

arch/arm/mach-integrator/integrator_cp.c

@@ -83,7 +83,6 @@ static struct map_desc intcp_io_desc[] __initdata = {
  { IO_ADDRESS(INTEGRATOR_UART1_BASE), INTEGRATOR_UART1_BASE, SZ_4K,  MT_DEVICE },
  { IO_ADDRESS(INTEGRATOR_DBG_BASE),   INTEGRATOR_DBG_BASE,   SZ_4K,  MT_DEVICE },
  { IO_ADDRESS(INTEGRATOR_GPIO_BASE),  INTEGRATOR_GPIO_BASE,  SZ_4K,  MT_DEVICE },
- { 0xfc900000, 0xc9000000, SZ_4K, MT_DEVICE },
  { 0xfca00000, 0xca000000, SZ_4K, MT_DEVICE },
  { 0xfcb00000, 0xcb000000, SZ_4K, MT_DEVICE },
 };

arch/arm/mach-pxa/lubbock.c

@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/sysdev.h>
 #include <linux/major.h>
 #include <linux/fb.h>
 #include <linux/interrupt.h>
@@ -106,6 +107,35 @@ static void __init lubbock_init_irq(void)
 	set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
 }
 
+#ifdef CONFIG_PM
+
+static int lubbock_irq_resume(struct sys_device *dev)
+{
+	LUB_IRQ_MASK_EN = lubbock_irq_enabled;
+	return 0;
+}
+
+static struct sysdev_class lubbock_irq_sysclass = {
+	set_kset_name("cpld_irq"),
+	.resume = lubbock_irq_resume,
+};
+
+static struct sys_device lubbock_irq_device = {
+	.cls = &lubbock_irq_sysclass,
+};
+
+static int __init lubbock_irq_device_init(void)
+{
+	int ret = sysdev_class_register(&lubbock_irq_sysclass);
+	if (ret == 0)
+		ret = sysdev_register(&lubbock_irq_device);
+	return ret;
+}
+
+device_initcall(lubbock_irq_device_init);
+
+#endif
+
 static int lubbock_udc_is_connected(void)
 {
 	return (LUB_MISC_RD & (1 << 9)) == 0;

arch/arm/mach-pxa/mainstone.c

@@ -15,6 +15,7 @@
 
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/sysdev.h>
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/bitops.h>
@@ -62,7 +63,6 @@ static struct irqchip mainstone_irq_chip = {
 	.unmask		= mainstone_unmask_irq,
 };
 
-
 static void mainstone_irq_handler(unsigned int irq, struct irqdesc *desc,
 				  struct pt_regs *regs)
 {
@@ -100,6 +100,35 @@ static void __init mainstone_init_irq(void)
 	set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
 }
 
+#ifdef CONFIG_PM
+
+static int mainstone_irq_resume(struct sys_device *dev)
+{
+	MST_INTMSKENA = mainstone_irq_enabled;
+	return 0;
+}
+
+static struct sysdev_class mainstone_irq_sysclass = {
+	set_kset_name("cpld_irq"),
+	.resume = mainstone_irq_resume,
+};
+
+static struct sys_device mainstone_irq_device = {
+	.cls = &mainstone_irq_sysclass,
+};
+
+static int __init mainstone_irq_device_init(void)
+{
+	int ret = sysdev_class_register(&mainstone_irq_sysclass);
+	if (ret == 0)
+		ret = sysdev_register(&mainstone_irq_device);
+	return ret;
+}
+
+device_initcall(mainstone_irq_device_init);
+
+#endif
+
 
 static struct resource smc91x_resources[] = {
 	[0] = {
@@ -304,6 +333,15 @@ static void __init mainstone_map_io(void)
 	PWER  = 0xC0000002;
 	PRER  = 0x00000002;
 	PFER  = 0x00000002;
+ 	/*	for use I SRAM as framebuffer.	*/
+ 	PSLR |= 0xF04;
+ 	PCFR = 0x66;
+ 	/*	For Keypad wakeup.	*/
+ 	KPC &=~KPC_ASACT;
+ 	KPC |=KPC_AS;
+ 	PKWR  = 0x000FD000;
+ 	/*	Need read PKWR back after set it.	*/
+ 	PKWR;
 }
 
 MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")

arch/arm/mach-pxa/pm.c

@@ -29,9 +29,6 @@
  */
 #undef DEBUG
 
-extern void pxa_cpu_suspend(void);
-extern void pxa_cpu_resume(void);
-
 #define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
 #define RESTORE(x)	x = sleep_save[SLEEP_SAVE_##x]
 
@@ -63,6 +60,12 @@ enum {	SLEEP_SAVE_START = 0,
 	SLEEP_SAVE_ICMR,
 	SLEEP_SAVE_CKEN,
 
+#ifdef CONFIG_PXA27x
+ 	SLEEP_SAVE_MDREFR,
+ 	SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER,
+ 	SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR,
+#endif
+
 	SLEEP_SAVE_CKSUM,
 
 	SLEEP_SAVE_SIZE
@@ -75,9 +78,7 @@ static int pxa_pm_enter(suspend_state_t state)
 	unsigned long checksum = 0;
 	struct timespec delta, rtc;
 	int i;
-
-	if (state != PM_SUSPEND_MEM)
-		return -EINVAL;
+	extern void pxa_cpu_pm_enter(suspend_state_t state);
 
 #ifdef CONFIG_IWMMXT
 	/* force any iWMMXt context to ram **/
@@ -100,16 +101,17 @@ static int pxa_pm_enter(suspend_state_t state)
 	SAVE(GAFR2_L); SAVE(GAFR2_U);
 
 #ifdef CONFIG_PXA27x
+	SAVE(MDREFR);
 	SAVE(GPLR3); SAVE(GPDR3); SAVE(GRER3); SAVE(GFER3); SAVE(PGSR3);
 	SAVE(GAFR3_L); SAVE(GAFR3_U);
+	SAVE(PWER); SAVE(PCFR); SAVE(PRER);
+	SAVE(PFER); SAVE(PKWR);
 #endif
 
 	SAVE(ICMR);
 	ICMR = 0;
 
 	SAVE(CKEN);
-	CKEN = 0;
-
 	SAVE(PSTR);
 
 	/* Note: wake up source are set up in each machine specific files */
@@ -123,16 +125,13 @@ static int pxa_pm_enter(suspend_state_t state)
 	/* Clear sleep reset status */
 	RCSR = RCSR_SMR;
 
-	/* set resume return address */
-	PSPR = virt_to_phys(pxa_cpu_resume);
-
 	/* before sleeping, calculate and save a checksum */
 	for (i = 0; i < SLEEP_SAVE_SIZE - 1; i++)
 		checksum += sleep_save[i];
 	sleep_save[SLEEP_SAVE_CKSUM] = checksum;
 
 	/* *** go zzz *** */
-	pxa_cpu_suspend();
+	pxa_cpu_pm_enter(state);
 
 	/* after sleeping, validate the checksum */
 	checksum = 0;
@@ -145,7 +144,7 @@ static int pxa_pm_enter(suspend_state_t state)
 		LUB_HEXLED = 0xbadbadc5;
 #endif
 		while (1)
-			pxa_cpu_suspend();
+			pxa_cpu_pm_enter(state);
 	}
 
 	/* ensure not to come back here if it wasn't intended */
@@ -162,8 +161,11 @@ static int pxa_pm_enter(suspend_state_t state)
 	RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2);
 
 #ifdef CONFIG_PXA27x
+	RESTORE(MDREFR);
 	RESTORE(GAFR3_L); RESTORE(GAFR3_U); RESTORE_GPLEVEL(3);
 	RESTORE(GPDR3); RESTORE(GRER3); RESTORE(GFER3); RESTORE(PGSR3);
+	RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER);
+	RESTORE(PFER); RESTORE(PKWR);
 #endif
 
 	PSSR = PSSR_RDH | PSSR_PH;
@@ -197,7 +199,9 @@ unsigned long sleep_phys_sp(void *sp)
  */
 static int pxa_pm_prepare(suspend_state_t state)
 {
-	return 0;
+	extern int pxa_cpu_pm_prepare(suspend_state_t state);
+
+	return pxa_cpu_pm_prepare(state);
 }
 
 /*

arch/arm/mach-pxa/pxa25x.c

@@ -16,6 +16,7 @@
  * initialization stuff for PXA machines which can be overridden later if
  * need be.
  */
+#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -102,3 +103,35 @@ unsigned int get_lcdclk_frequency_10khz(void)
 }
 
 EXPORT_SYMBOL(get_lcdclk_frequency_10khz);
+
+#ifdef CONFIG_PM
+
+int pxa_cpu_pm_prepare(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_MEM:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+void pxa_cpu_pm_enter(suspend_state_t state)
+{
+	extern void pxa_cpu_suspend(unsigned int);
+	extern void pxa_cpu_resume(void);
+
+	CKEN = 0;
+
+	switch (state) {
+	case PM_SUSPEND_MEM:
+		/* set resume return address */
+		PSPR = virt_to_phys(pxa_cpu_resume);
+		pxa_cpu_suspend(3);
+		break;
+	}
+}
+
+#endif

arch/arm/mach-pxa/pxa27x.c

@@ -120,6 +120,42 @@ EXPORT_SYMBOL(get_clk_frequency_khz);
 EXPORT_SYMBOL(get_memclk_frequency_10khz);
 EXPORT_SYMBOL(get_lcdclk_frequency_10khz);
 
+#ifdef CONFIG_PM
+
+int pxa_cpu_pm_prepare(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_MEM:
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+void pxa_cpu_pm_enter(suspend_state_t state)
+{
+	extern void pxa_cpu_standby(void);
+	extern void pxa_cpu_suspend(unsigned int);
+	extern void pxa_cpu_resume(void);
+
+	CKEN = CKEN22_MEMC | CKEN9_OSTIMER;
+
+	/* ensure voltage-change sequencer not initiated, which hangs */
+	PCFR &= ~PCFR_FVC;
+
+	/* Clear edge-detect status register. */
+	PEDR = 0xDF12FE1B;
+
+	switch (state) {
+	case PM_SUSPEND_MEM:
+		/* set resume return address */
+		PSPR = virt_to_phys(pxa_cpu_resume);
+		pxa_cpu_suspend(3);
+		break;
+	}
+}
+
+#endif
 
 /*
  * device registration specific to PXA27x.

arch/arm/mach-s3c2410/dma.c

@@ -785,6 +785,10 @@ int s3c2410_dma_free(dmach_t channel, s3c2410_dma_client_t *client)
 	chan->client = NULL;
 	chan->in_use = 0;
 
+	if (chan->irq_claimed)
+		free_irq(chan->irq, (void *)chan);
+	chan->irq_claimed = 0;
+
 	local_irq_restore(flags);
 
 	return 0;

arch/arm/mach-sa1100/Kconfig

@@ -150,7 +150,7 @@ config SA1100_SSP
 
 config H3600_SLEEVE
 	tristate "Compaq iPAQ Handheld sleeve support"
-	depends on SA1100_H3600
+	depends on SA1100_H3100 || SA1100_H3600
 	help
 	  Choose this option to enable support for extension packs (sleeves)
 	  for the Compaq iPAQ H3XXX series of handheld computers.  This option

arch/arm/mach-versatile/core.c

@@ -543,7 +543,7 @@ static void versatile_clcd_enable(struct clcd_fb *fb)
 		val |= SYS_CLCD_MODE_5551;
 		break;
 	case 6:
-		val |= SYS_CLCD_MODE_565_BLSB;
+		val |= SYS_CLCD_MODE_565_RLSB;
 		break;
 	case 8:
 		val |= SYS_CLCD_MODE_888;

arch/arm/mm/Kconfig

@@ -228,7 +228,6 @@ config CPU_SA1100
 	select CPU_CACHE_V4WB
 	select CPU_CACHE_VIVT
 	select CPU_TLB_V4WB
-	select CPU_MINICACHE
 
 # XScale
 config CPU_XSCALE
@@ -239,7 +238,6 @@ config CPU_XSCALE
 	select CPU_ABRT_EV5T
 	select CPU_CACHE_VIVT
 	select CPU_TLB_V4WBI
-	select CPU_MINICACHE
 
 # ARMv6
 config CPU_V6
@@ -345,11 +343,6 @@ config CPU_TLB_V4WBI
 config CPU_TLB_V6
 	bool
 
-config CPU_MINICACHE
-	bool
-	help
-	  Processor has a minicache.
-
 comment "Processor Features"
 
 config ARM_THUMB
@@ -429,3 +422,11 @@ config HAS_TLS_REG
 	  assume directly accessing that register and always obtain the
 	  expected value only on ARMv7 and above.
 
+config NEEDS_SYSCALL_FOR_CMPXCHG
+	bool
+	default y if SMP && (CPU_32v5 || CPU_32v4 || CPU_32v3)
+	help
+	  SMP on a pre-ARMv6 processor?  Well OK then.
+	  Forget about fast user space cmpxchg support.
+	  It is just not possible.
+

arch/arm/mm/Makefile

@@ -31,8 +31,6 @@ obj-$(CONFIG_CPU_COPY_V6)	+= copypage-v6.o mmu.o
 obj-$(CONFIG_CPU_SA1100)	+= copypage-v4mc.o
 obj-$(CONFIG_CPU_XSCALE)	+= copypage-xscale.o
 
-obj-$(CONFIG_CPU_MINICACHE)	+= minicache.o
-
 obj-$(CONFIG_CPU_TLB_V3)	+= tlb-v3.o
 obj-$(CONFIG_CPU_TLB_V4WT)	+= tlb-v4.o
 obj-$(CONFIG_CPU_TLB_V4WB)	+= tlb-v4wb.o

arch/arm/mm/copypage-xscale.S

@@ -1,113 +0,0 @@
-/*
- *  linux/arch/arm/lib/copypage-xscale.S
- *
- *  Copyright (C) 2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/constants.h>
-
-/*
- * General note:
- *  We don't really want write-allocate cache behaviour for these functions
- *  since that will just eat through 8K of the cache.
- */
-
-	.text
-	.align	5
-/*
- * XScale optimised copy_user_page
- *  r0 = destination
- *  r1 = source
- *  r2 = virtual user address of ultimate destination page
- *
- * The source page may have some clean entries in the cache already, but we
- * can safely ignore them - break_cow() will flush them out of the cache
- * if we eventually end up using our copied page.
- *
- * What we could do is use the mini-cache to buffer reads from the source
- * page.  We rely on the mini-cache being smaller than one page, so we'll
- * cycle through the complete cache anyway.
- */
-ENTRY(xscale_mc_copy_user_page)
-	stmfd	sp!, {r4, r5, lr}
-	mov	r5, r0
-	mov	r0, r1
-	bl	map_page_minicache
-	mov	r1, r5
-	mov	lr, #PAGE_SZ/64-1
-
-	/*
-	 * Strangely enough, best performance is achieved
-	 * when prefetching destination as well.  (NP)
-	 */
-	pld	[r0, #0]
-	pld	[r0, #32]
-	pld	[r1, #0]
-	pld	[r1, #32]
-
-1:	pld	[r0, #64]
-	pld	[r0, #96]
-	pld	[r1, #64]
-	pld	[r1, #96]
-
-2:	ldrd	r2, [r0], #8
-	ldrd	r4, [r0], #8
-	mov	ip, r1
-	strd	r2, [r1], #8
-	ldrd	r2, [r0], #8
-	strd	r4, [r1], #8
-	ldrd	r4, [r0], #8
-	strd	r2, [r1], #8
-	strd	r4, [r1], #8
-	mcr	p15, 0, ip, c7, c10, 1		@ clean D line
-	ldrd	r2, [r0], #8
-	mcr	p15, 0, ip, c7, c6, 1		@ invalidate D line
-	ldrd	r4, [r0], #8
-	mov	ip, r1
-	strd	r2, [r1], #8
-	ldrd	r2, [r0], #8
-	strd	r4, [r1], #8
-	ldrd	r4, [r0], #8
-	strd	r2, [r1], #8
-	strd	r4, [r1], #8
-	mcr	p15, 0, ip, c7, c10, 1		@ clean D line
-	subs	lr, lr, #1
-	mcr	p15, 0, ip, c7, c6, 1		@ invalidate D line
-	bgt	1b
-	beq	2b
-
-	ldmfd	sp!, {r4, r5, pc}
-
-	.align	5
-/*
- * XScale optimised clear_user_page
- *  r0 = destination
- *  r1 = virtual user address of ultimate destination page
- */
-ENTRY(xscale_mc_clear_user_page)
-	mov	r1, #PAGE_SZ/32
-	mov	r2, #0
-	mov	r3, #0
-1:	mov	ip, r0
-	strd	r2, [r0], #8
-	strd	r2, [r0], #8
-	strd	r2, [r0], #8
-	strd	r2, [r0], #8
-	mcr	p15, 0, ip, c7, c10, 1		@ clean D line
-	subs	r1, r1, #1
-	mcr	p15, 0, ip, c7, c6, 1		@ invalidate D line
-	bne	1b
-	mov	pc, lr
-
-	__INITDATA
-
-	.type	xscale_mc_user_fns, #object
-ENTRY(xscale_mc_user_fns)
-	.long	xscale_mc_clear_user_page
-	.long	xscale_mc_copy_user_page
-	.size	xscale_mc_user_fns, . - xscale_mc_user_fns

arch/arm/mm/copypage-xscale.c

@@ -0,0 +1,131 @@
+/*
+ *  linux/arch/arm/lib/copypage-xscale.S
+ *
+ *  Copyright (C) 1995-2005 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This handles the mini data cache, as found on SA11x0 and XScale
+ * processors.  When we copy a user page page, we map it in such a way
+ * that accesses to this page will not touch the main data cache, but
+ * will be cached in the mini data cache.  This prevents us thrashing
+ * the main data cache on page faults.
+ */
+#include <linux/init.h>
+#include <linux/mm.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+
+/*
+ * 0xffff8000 to 0xffffffff is reserved for any ARM architecture
+ * specific hacks for copying pages efficiently.
+ */
+#define COPYPAGE_MINICACHE	0xffff8000
+
+#define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \
+				  L_PTE_CACHEABLE)
+
+#define TOP_PTE(x)	pte_offset_kernel(top_pmd, x)
+
+static DEFINE_SPINLOCK(minicache_lock);
+
+/*
+ * XScale mini-dcache optimised copy_user_page
+ *
+ * We flush the destination cache lines just before we write the data into the
+ * corresponding address.  Since the Dcache is read-allocate, this removes the
+ * Dcache aliasing issue.  The writes will be forwarded to the write buffer,
+ * and merged as appropriate.
+ */
+static void __attribute__((naked))
+mc_copy_user_page(void *from, void *to)
+{
+	/*
+	 * Strangely enough, best performance is achieved
+	 * when prefetching destination as well.  (NP)
+	 */
+	asm volatile(
+	"stmfd	sp!, {r4, r5, lr}		\n\
+	mov	lr, %2				\n\
+	pld	[r0, #0]			\n\
+	pld	[r0, #32]			\n\
+	pld	[r1, #0]			\n\
+	pld	[r1, #32]			\n\
+1:	pld	[r0, #64]			\n\
+	pld	[r0, #96]			\n\
+	pld	[r1, #64]			\n\
+	pld	[r1, #96]			\n\
+2:	ldrd	r2, [r0], #8			\n\
+	ldrd	r4, [r0], #8			\n\
+	mov	ip, r1				\n\
+	strd	r2, [r1], #8			\n\
+	ldrd	r2, [r0], #8			\n\
+	strd	r4, [r1], #8			\n\
+	ldrd	r4, [r0], #8			\n\
+	strd	r2, [r1], #8			\n\
+	strd	r4, [r1], #8			\n\
+	mcr	p15, 0, ip, c7, c10, 1		@ clean D line\n\
+	ldrd	r2, [r0], #8			\n\
+	mcr	p15, 0, ip, c7, c6, 1		@ invalidate D line\n\
+	ldrd	r4, [r0], #8			\n\
+	mov	ip, r1				\n\
+	strd	r2, [r1], #8			\n\
+	ldrd	r2, [r0], #8			\n\
+	strd	r4, [r1], #8			\n\
+	ldrd	r4, [r0], #8			\n\
+	strd	r2, [r1], #8			\n\
+	strd	r4, [r1], #8			\n\
+	mcr	p15, 0, ip, c7, c10, 1		@ clean D line\n\
+	subs	lr, lr, #1			\n\
+	mcr	p15, 0, ip, c7, c6, 1		@ invalidate D line\n\
+	bgt	1b				\n\
+	beq	2b				\n\
+	ldmfd	sp!, {r4, r5, pc}		"
+	:
+	: "r" (from), "r" (to), "I" (PAGE_SIZE / 64 - 1));
+}
+
+void xscale_mc_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr)
+{
+	spin_lock(&minicache_lock);
+
+	set_pte(TOP_PTE(COPYPAGE_MINICACHE), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot));
+	flush_tlb_kernel_page(COPYPAGE_MINICACHE);
+
+	mc_copy_user_page((void *)COPYPAGE_MINICACHE, kto);
+
+	spin_unlock(&minicache_lock);
+}
+
+/*
+ * XScale optimised clear_user_page
+ */
+void __attribute__((naked))
+xscale_mc_clear_user_page(void *kaddr, unsigned long vaddr)
+{
+	asm volatile(
+	"mov	r1, %0				\n\
+	mov	r2, #0				\n\
+	mov	r3, #0				\n\
+1:	mov	ip, r0				\n\
+	strd	r2, [r0], #8			\n\
+	strd	r2, [r0], #8			\n\
+	strd	r2, [r0], #8			\n\
+	strd	r2, [r0], #8			\n\
+	mcr	p15, 0, ip, c7, c10, 1		@ clean D line\n\
+	subs	r1, r1, #1			\n\
+	mcr	p15, 0, ip, c7, c6, 1		@ invalidate D line\n\
+	bne	1b				\n\
+	mov	pc, lr"
+	:
+	: "I" (PAGE_SIZE / 32));
+}
+
+struct cpu_user_fns xscale_mc_user_fns __initdata = {
+	.cpu_clear_user_page	= xscale_mc_clear_user_page, 
+	.cpu_copy_user_page	= xscale_mc_copy_user_page,
+};

arch/arm/mm/minicache.c

@@ -1,73 +0,0 @@
-/*
- *  linux/arch/arm/mm/minicache.c
- *
- *  Copyright (C) 2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This handles the mini data cache, as found on SA11x0 and XScale
- * processors.  When we copy a user page page, we map it in such a way
- * that accesses to this page will not touch the main data cache, but
- * will be cached in the mini data cache.  This prevents us thrashing
- * the main data cache on page faults.
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/tlbflush.h>
-
-/*
- * 0xffff8000 to 0xffffffff is reserved for any ARM architecture
- * specific hacks for copying pages efficiently.
- */
-#define minicache_address (0xffff8000)
-#define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \
-				  L_PTE_CACHEABLE)
-
-static pte_t *minicache_pte;
-
-/*
- * Note that this is intended to be called only from the copy_user_page
- * asm code; anything else will require special locking to prevent the
- * mini-cache space being re-used.  (Note: probably preempt unsafe).
- *
- * We rely on the fact that the minicache is 2K, and we'll be pushing
- * 4K of data through it, so we don't actually have to specifically
- * flush the minicache when we change the mapping.
- *
- * Note also: assert(PAGE_OFFSET <= virt < high_memory).
- * Unsafe: preempt, kmap.
- */
-unsigned long map_page_minicache(unsigned long virt)
-{
-	set_pte(minicache_pte, pfn_pte(__pa(virt) >> PAGE_SHIFT, minicache_pgprot));
-	flush_tlb_kernel_page(minicache_address);
-
-	return minicache_address;
-}
-
-static int __init minicache_init(void)
-{
-	pgd_t *pgd;
-	pmd_t *pmd;
-
-	spin_lock(&init_mm.page_table_lock);
-
-	pgd = pgd_offset_k(minicache_address);
-	pmd = pmd_alloc(&init_mm, pgd, minicache_address);
-	if (!pmd)
-		BUG();
-	minicache_pte = pte_alloc_kernel(&init_mm, pmd, minicache_address);
-	if (!minicache_pte)
-		BUG();
-
-	spin_unlock(&init_mm.page_table_lock);
-
-	return 0;
-}
-
-core_initcall(minicache_init);

arch/i386/kernel/Makefile

@@ -43,7 +43,7 @@ obj-$(CONFIG_SCx200)		+= scx200.o
 # Note: kbuild does not track this dependency due to usage of .incbin
 $(obj)/vsyscall.o: $(obj)/vsyscall-int80.so $(obj)/vsyscall-sysenter.so
 targets += $(foreach F,int80 sysenter,vsyscall-$F.o vsyscall-$F.so)
-targets += vsyscall.lds
+targets += vsyscall-note.o vsyscall.lds
 
 # The DSO images are built using a special linker script.
 quiet_cmd_syscall = SYSCALL $@

arch/i386/kernel/apm.c

@@ -1222,6 +1222,7 @@ static int suspend(int vetoable)
 
 	save_processor_state();
 	err = set_system_power_state(APM_STATE_SUSPEND);
+	ignore_normal_resume = 1;
 	restore_processor_state();
 
 	local_irq_disable();
@@ -1229,7 +1230,6 @@ static int suspend(int vetoable)
 	spin_lock(&i8253_lock);
 	reinit_timer();
 	set_time();
-	ignore_normal_resume = 1;
 
 	spin_unlock(&i8253_lock);
 	write_sequnlock(&xtime_lock);

arch/ia64/kernel/fsys.S

@@ -460,9 +460,9 @@ EX(.fail_efault, ld8 r14=[r33])			// r14 <- *set
 	;;
 
 	st8 [r2]=r14				// update current->blocked with new mask
-	cmpxchg4.acq r14=[r9],r18,ar.ccv	// current->thread_info->flags <- r18
+	cmpxchg4.acq r8=[r9],r18,ar.ccv		// current->thread_info->flags <- r18
 	;;
-	cmp.ne p6,p0=r17,r14			// update failed?
+	cmp.ne p6,p0=r17,r8			// update failed?
 (p6)	br.cond.spnt.few 1b			// yes -> retry
 
 #ifdef CONFIG_SMP

arch/ia64/kernel/module.c

@@ -825,14 +825,16 @@ apply_relocate_add (Elf64_Shdr *sechdrs, const char *strtab, unsigned int symind
 		 * XXX Should have an arch-hook for running this after final section
 		 *     addresses have been selected...
 		 */
-		/* See if gp can cover the entire core module:  */
-		uint64_t gp = (uint64_t) mod->module_core + MAX_LTOFF / 2;
-		if (mod->core_size >= MAX_LTOFF)
+		uint64_t gp;
+		if (mod->core_size > MAX_LTOFF)
 			/*
 			 * This takes advantage of fact that SHF_ARCH_SMALL gets allocated
 			 * at the end of the module.
 			 */
-			gp = (uint64_t) mod->module_core + mod->core_size - MAX_LTOFF / 2;
+			gp = mod->core_size - MAX_LTOFF / 2;
+		else
+			gp = mod->core_size / 2;
+		gp = (uint64_t) mod->module_core + ((gp + 7) & -8);
 		mod->arch.gp = gp;
 		DEBUGP("%s: placing gp at 0x%lx\n", __FUNCTION__, gp);
 	}

arch/ia64/kernel/ptrace.c

@@ -635,11 +635,17 @@ ia64_flush_fph (struct task_struct *task)
 {
 	struct ia64_psr *psr = ia64_psr(ia64_task_regs(task));
 
+	/*
+	 * Prevent migrating this task while
+	 * we're fiddling with the FPU state
+	 */
+	preempt_disable();
 	if (ia64_is_local_fpu_owner(task) && psr->mfh) {
 		psr->mfh = 0;
 		task->thread.flags |= IA64_THREAD_FPH_VALID;
 		ia64_save_fpu(&task->thread.fph[0]);
 	}
+	preempt_enable();
 }
 
 /*

arch/ia64/kernel/setup.c

@@ -720,7 +720,8 @@ cpu_init (void)
 	ia64_set_kr(IA64_KR_PT_BASE, __pa(ia64_imva(empty_zero_page)));
 
 	/*
-	 * Initialize default control register to defer all speculative faults.  The
+	 * Initialize default control register to defer speculative faults except
+	 * for those arising from TLB misses, which are not deferred.  The
 	 * kernel MUST NOT depend on a particular setting of these bits (in other words,
 	 * the kernel must have recovery code for all speculative accesses).  Turn on
 	 * dcr.lc as per recommendation by the architecture team.  Most IA-32 apps

arch/ia64/kernel/traps.c

@@ -111,6 +111,24 @@ ia64_bad_break (unsigned long break_num, struct pt_regs *regs)
 	siginfo_t siginfo;
 	int sig, code;
 
+	/* break.b always sets cr.iim to 0, which causes problems for
+	 * debuggers.  Get the real break number from the original instruction,
+	 * but only for kernel code.  User space break.b is left alone, to
+	 * preserve the existing behaviour.  All break codings have the same
+	 * format, so there is no need to check the slot type.
+	 */
+	if (break_num == 0 && !user_mode(regs)) {
+		struct ia64_psr *ipsr = ia64_psr(regs);
+		unsigned long *bundle = (unsigned long *)regs->cr_iip;
+		unsigned long slot;
+		switch (ipsr->ri) {
+		      case 0:  slot = (bundle[0] >>  5); break;
+		      case 1:  slot = (bundle[0] >> 46) | (bundle[1] << 18); break;
+		      default: slot = (bundle[1] >> 23); break;
+		}
+		break_num = ((slot >> 36 & 1) << 20) | (slot >> 6 & 0xfffff);
+	}
+
 	/* SIGILL, SIGFPE, SIGSEGV, and SIGBUS want these field initialized: */
 	siginfo.si_addr = (void __user *) (regs->cr_iip + ia64_psr(regs)->ri);
 	siginfo.si_imm = break_num;
@@ -202,13 +220,21 @@ disabled_fph_fault (struct pt_regs *regs)
 
 	/* first, grant user-level access to fph partition: */
 	psr->dfh = 0;
+
+	/*
+	 * Make sure that no other task gets in on this processor
+	 * while we're claiming the FPU
+	 */
+	preempt_disable();
 #ifndef CONFIG_SMP
 	{
 		struct task_struct *fpu_owner
 			= (struct task_struct *)ia64_get_kr(IA64_KR_FPU_OWNER);
 
-		if (ia64_is_local_fpu_owner(current))
+		if (ia64_is_local_fpu_owner(current)) {
+			preempt_enable_no_resched();
 			return;
+		}
 
 		if (fpu_owner)
 			ia64_flush_fph(fpu_owner);
@@ -226,6 +252,7 @@ disabled_fph_fault (struct pt_regs *regs)
 		 */
 		psr->mfh = 1;
 	}
+	preempt_enable_no_resched();
 }
 
 static inline int

arch/ia64/mm/init.c

@@ -305,8 +305,9 @@ setup_gate (void)
 	struct page *page;
 
 	/*
-	 * Map the gate page twice: once read-only to export the ELF headers etc. and once
-	 * execute-only page to enable privilege-promotion via "epc":
+	 * Map the gate page twice: once read-only to export the ELF
+	 * headers etc. and once execute-only page to enable
+	 * privilege-promotion via "epc":
 	 */
 	page = virt_to_page(ia64_imva(__start_gate_section));
 	put_kernel_page(page, GATE_ADDR, PAGE_READONLY);
@@ -315,6 +316,20 @@ setup_gate (void)
 	put_kernel_page(page, GATE_ADDR + PAGE_SIZE, PAGE_GATE);
 #else
 	put_kernel_page(page, GATE_ADDR + PERCPU_PAGE_SIZE, PAGE_GATE);
+	/* Fill in the holes (if any) with read-only zero pages: */
+	{
+		unsigned long addr;
+
+		for (addr = GATE_ADDR + PAGE_SIZE;
+		     addr < GATE_ADDR + PERCPU_PAGE_SIZE;
+		     addr += PAGE_SIZE)
+		{
+			put_kernel_page(ZERO_PAGE(0), addr,
+					PAGE_READONLY);
+			put_kernel_page(ZERO_PAGE(0), addr + PERCPU_PAGE_SIZE,
+					PAGE_READONLY);
+		}
+	}
 #endif
 	ia64_patch_gate();
 }

arch/ia64/sn/kernel/setup.c

@@ -222,7 +222,7 @@ void __init early_sn_setup(void)
 
 extern int platform_intr_list[];
 extern nasid_t master_nasid;
-static int shub_1_1_found __initdata;
+static int __initdata shub_1_1_found = 0;
 
 /*
  * sn_check_for_wars
@@ -251,7 +251,7 @@ static void __init sn_check_for_wars(void)
 	} else {
 		for_each_online_node(cnode) {
 			if (is_shub_1_1(cnodeid_to_nasid(cnode)))
-				sn_hub_info->shub_1_1_found = 1;
+				shub_1_1_found = 1;
 		}
 	}
 }

arch/m68k/configs/amiga_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc2-m68k
-# Tue Apr  5 14:05:59 2005
+# Linux kernel version: 2.6.12-rc6-m68k
+# Tue Jun  7 20:34:23 2005
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -135,7 +137,6 @@ CONFIG_PARPORT_1284=y
 #
 CONFIG_AMIGA_FLOPPY=y
 CONFIG_AMIGA_Z2RAM=y
-# CONFIG_BLK_DEV_XD is not set
 # CONFIG_PARIDE is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
@@ -223,17 +224,12 @@ CONFIG_SCSI_CONSTANTS=y
 #
 # SCSI low-level drivers
 #
-# CONFIG_SCSI_7000FASST is not set
 # CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_IN2000 is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_GENERIC_NCR5380 is not set
 # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
 # CONFIG_SCSI_PPA is not set
@@ -244,7 +240,6 @@ CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_A3000_SCSI=y
 CONFIG_A2091_SCSI=y
@@ -492,7 +487,6 @@ CONFIG_HYDRA=m
 CONFIG_ZORRO8390=m
 CONFIG_APNE=m
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
 # CONFIG_AT1700 is not set
@@ -620,7 +614,6 @@ CONFIG_SERIO_SERPORT=m
 # CONFIG_SERIO_PARKBD is not set
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices

arch/m68k/configs/apollo_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc2-m68k
-# Tue Apr  5 14:06:00 2005
+# Linux kernel version: 2.6.12-rc6-m68k
+# Tue Jun  7 20:34:27 2005
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -497,7 +499,6 @@ CONFIG_SERIO_SERPORT=m
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices

arch/m68k/configs/atari_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc2-m68k
-# Tue Apr  5 14:06:18 2005
+# Linux kernel version: 2.6.12-rc6-m68k
+# Tue Jun  7 20:34:32 2005
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -531,7 +533,6 @@ CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices

arch/m68k/configs/bvme6000_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc2-m68k
-# Tue Apr  5 14:06:19 2005
+# Linux kernel version: 2.6.12-rc6-m68k
+# Tue Jun  7 20:34:37 2005
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -496,7 +498,6 @@ CONFIG_SERIO_SERPORT=m
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices

arch/m68k/configs/hp300_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc2-m68k
-# Tue Apr  5 14:06:21 2005
+# Linux kernel version: 2.6.12-rc6-m68k
+# Tue Jun  7 20:34:41 2005
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -498,7 +500,6 @@ CONFIG_SERIO_SERPORT=m
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices

arch/m68k/configs/mac_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc2-m68k
-# Tue Apr  5 14:06:24 2005
+# Linux kernel version: 2.6.12-rc6-m68k
+# Tue Jun  7 20:34:45 2005
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -540,7 +542,6 @@ CONFIG_SERIO_SERPORT=m
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices

arch/m68k/configs/mvme147_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc2-m68k
-# Tue Apr  5 14:06:28 2005
+# Linux kernel version: 2.6.12-rc6-m68k
+# Tue Jun  7 20:34:50 2005
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -498,7 +500,6 @@ CONFIG_SERIO_SERPORT=m
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices

arch/m68k/configs/mvme16x_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc2-m68k
-# Tue Apr  5 14:06:31 2005
+# Linux kernel version: 2.6.12-rc6-m68k
+# Tue Jun  7 20:34:53 2005
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -497,7 +499,6 @@ CONFIG_SERIO_SERPORT=m
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices

arch/m68k/configs/q40_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc2-m68k
-# Tue Apr  5 14:06:34 2005
+# Linux kernel version: 2.6.12-rc6-m68k
+# Tue Jun  7 20:34:58 2005
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -125,7 +127,6 @@ CONFIG_FW_LOADER=m
 # Block devices
 #
 # CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
@@ -210,17 +211,12 @@ CONFIG_SCSI_CONSTANTS=y
 #
 # SCSI low-level drivers
 #
-# CONFIG_SCSI_7000FASST is not set
 # CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_IN2000 is not set
 # CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_GENERIC_NCR5380 is not set
 # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
 # CONFIG_SCSI_NCR53C406A is not set
@@ -229,7 +225,6 @@ CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
 # CONFIG_SCSI_DEBUG is not set
 
 #
@@ -466,7 +461,6 @@ CONFIG_EQUALIZER=m
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
 # CONFIG_AT1700 is not set
@@ -570,7 +564,6 @@ CONFIG_SERIO_Q40KBD=m
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices

arch/m68k/configs/sun3_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc2-m68k
-# Tue Apr  5 14:06:37 2005
+# Linux kernel version: 2.6.12-rc6-m68k
+# Tue Jun  7 20:35:02 2005
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -171,7 +173,6 @@ CONFIG_SCSI_CONSTANTS=y
 #
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DEBUG is not set
-CONFIG_SUN3_SCSI=y
 
 #
 # Multi-device support (RAID and LVM)
@@ -487,7 +488,6 @@ CONFIG_SERIO_SERPORT=m
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices

arch/m68k/configs/sun3x_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc2-m68k
-# Tue Apr  5 14:06:40 2005
+# Linux kernel version: 2.6.12-rc6-m68k
+# Tue Jun  7 20:35:06 2005
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -497,7 +499,6 @@ CONFIG_SERIO_SERPORT=m
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices

arch/m68k/defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc2-m68k
-# Tue Apr  5 14:05:31 2005
+# Linux kernel version: 2.6.12-rc6-m68k
+# Tue Jun  7 20:34:17 2005
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@@ -33,6 +33,8 @@ CONFIG_KOBJECT_UEVENT=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -355,7 +357,6 @@ CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices

arch/ppc/kernel/cputable.c

@@ -838,6 +838,17 @@ struct cpu_spec	cpu_specs[] = {
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 	},
+	{	/* 405EP */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x51210000,
+		.cpu_name		= "405EP",
+		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
+			CPU_FTR_USE_TB,
+		.cpu_user_features	= PPC_FEATURE_32 |
+			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+	},
 
 #endif /* CONFIG_40x */
 #ifdef CONFIG_44x

arch/ppc/kernel/misc.S

@@ -619,7 +619,7 @@ _GLOBAL(flush_instruction_cache)
 _GLOBAL(flush_icache_range)
 BEGIN_FTR_SECTION
 	blr				/* for 601, do nothing */
-END_FTR_SECTION_IFSET(PPC_FEATURE_UNIFIED_CACHE)
+END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE)
 	li	r5,L1_CACHE_LINE_SIZE-1
 	andc	r3,r3,r5
 	subf	r4,r3,r4
@@ -736,7 +736,7 @@ _GLOBAL(flush_dcache_all)
 _GLOBAL(__flush_dcache_icache)
 BEGIN_FTR_SECTION
 	blr					/* for 601, do nothing */
-END_FTR_SECTION_IFSET(PPC_FEATURE_UNIFIED_CACHE)
+END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE)
 	rlwinm	r3,r3,0,0,19			/* Get page base address */
 	li	r4,4096/L1_CACHE_LINE_SIZE	/* Number of lines in a page */
 	mtctr	r4
@@ -764,7 +764,7 @@ END_FTR_SECTION_IFSET(PPC_FEATURE_UNIFIED_CACHE)
 _GLOBAL(__flush_dcache_icache_phys)
 BEGIN_FTR_SECTION
 	blr					/* for 601, do nothing */
-END_FTR_SECTION_IFSET(PPC_FEATURE_UNIFIED_CACHE)
+END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE)
 	mfmsr	r10
 	rlwinm	r0,r10,0,28,26			/* clear DR */
 	mtmsr	r0

arch/ppc/platforms/pmac_cpufreq.c

@@ -83,7 +83,7 @@ static u32 frequency_gpio;
 static u32 slew_done_gpio;
 static int no_schedule;
 static int has_cpu_l2lve;
-
+static int is_pmu_based;
 
 /* There are only two frequency states for each processor. Values
  * are in kHz for the time being.
@@ -463,7 +463,7 @@ static int __pmac pmac_cpufreq_suspend(struct cpufreq_policy *policy, u32 state)
 	 */
 	no_schedule = 1;
 	sleep_freq = cur_freq;
-	if (cur_freq == low_freq)
+	if (cur_freq == low_freq && !is_pmu_based)
 		do_set_cpu_speed(CPUFREQ_HIGH, 0);
 	return 0;
 }
@@ -588,6 +588,7 @@ static int __pmac pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
 		return 1;
 	hi_freq = (*value) / 1000;
 	set_speed_proc = pmu_set_cpu_speed;
+	is_pmu_based = 1;
 
 	return 0;
 }
@@ -692,6 +693,7 @@ static int __init pmac_cpufreq_setup(void)
 		hi_freq = cur_freq;
 		low_freq = 400000;
 		set_speed_proc = pmu_set_cpu_speed;
+		is_pmu_based = 1;
 	}
 	/* Else check for TiPb 400 & 500 */
 	else if (machine_is_compatible("PowerBook3,2")) {
@@ -703,6 +705,7 @@ static int __init pmac_cpufreq_setup(void)
 		hi_freq = cur_freq;
 		low_freq = 300000;
 		set_speed_proc = pmu_set_cpu_speed;
+		is_pmu_based = 1;
 	}
 	/* Else check for 750FX */
 	else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000)

arch/ppc64/boot/prom.c

@@ -11,6 +11,23 @@
 #include <linux/string.h>
 #include <linux/ctype.h>
 
+extern __u32 __div64_32(unsigned long long *dividend, __u32 divisor);
+
+/* The unnecessary pointer compare is there
+ * to check for type safety (n must be 64bit)
+ */
+# define do_div(n,base) ({				\
+	__u32 __base = (base);			\
+	__u32 __rem;					\
+	(void)(((typeof((n)) *)0) == ((unsigned long long *)0));	\
+	if (((n) >> 32) == 0) {			\
+		__rem = (__u32)(n) % __base;		\
+		(n) = (__u32)(n) / __base;		\
+	} else 						\
+		__rem = __div64_32(&(n), __base);	\
+	__rem;						\
+ })
+
 int (*prom)(void *);
 
 void *chosen_handle;
@@ -352,7 +369,7 @@ static int skip_atoi(const char **s)
 #define SPECIAL	32		/* 0x */
 #define LARGE	64		/* use 'ABCDEF' instead of 'abcdef' */
 
-static char * number(char * str, long num, int base, int size, int precision, int type)
+static char * number(char * str, unsigned long long num, int base, int size, int precision, int type)
 {
 	char c,sign,tmp[66];
 	const char *digits="0123456789abcdefghijklmnopqrstuvwxyz";
@@ -367,9 +384,9 @@ static char * number(char * str, long num, int base, int size, int precision, in
 	c = (type & ZEROPAD) ? '0' : ' ';
 	sign = 0;
 	if (type & SIGN) {
-		if (num < 0) {
+		if ((signed long long)num < 0) {
 			sign = '-';
-			num = -num;
+			num = - (signed long long)num;
 			size--;
 		} else if (type & PLUS) {
 			sign = '+';
@@ -389,8 +406,7 @@ static char * number(char * str, long num, int base, int size, int precision, in
 	if (num == 0)
 		tmp[i++]='0';
 	else while (num != 0) {
-		tmp[i++] = digits[num % base];
-		num /= base;
+		tmp[i++] = digits[do_div(num, base)];
 	}
 	if (i > precision)
 		precision = i;
@@ -426,7 +442,7 @@ int sprintf(char * buf, const char *fmt, ...);
 int vsprintf(char *buf, const char *fmt, va_list args)
 {
 	int len;
-	unsigned long num;
+	unsigned long long num;
 	int i, base;
 	char * str;
 	const char *s;

arch/ppc64/configs/g5_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11
-# Thu Mar 10 16:47:04 2005
+# Linux kernel version: 2.6.12-rc6
+# Tue Jun 14 16:59:20 2005
 #
 CONFIG_64BIT=y
 CONFIG_MMU=y
@@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_HAVE_DEC_LOCK=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
-CONFIG_FRAME_POINTER=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 
 #
@@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -31,19 +32,20 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=17
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
@@ -87,6 +89,8 @@ CONFIG_NR_CPUS=2
 # CONFIG_SCHED_SMT is not set
 # CONFIG_PREEMPT is not set
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
 
 #
 # General setup
@@ -97,6 +101,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_PCI_LEGACY_PROC=y
 CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 # CONFIG_HOTPLUG_CPU is not set
 
 #
@@ -104,10 +109,6 @@ CONFIG_PCI_NAMES=y
 #
 # CONFIG_PCCARD is not set
 
-#
-# PC-card bridges
-#
-
 #
 # PCI Hotplug Support
 #
@@ -293,7 +294,6 @@ CONFIG_SCSI_SATA_SVW=y
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
@@ -301,7 +301,6 @@ CONFIG_SCSI_SATA_SVW=y
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA2XXX=y
@@ -310,6 +309,7 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_SCSI_QLA2300 is not set
 # CONFIG_SCSI_QLA2322 is not set
 # CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -332,6 +332,7 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
+# CONFIG_DM_MULTIPATH is not set
 
 #
 # Fusion MPT device support
@@ -394,7 +395,6 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
 CONFIG_NET_KEY=m
 CONFIG_INET=y
@@ -564,6 +564,8 @@ CONFIG_E1000=y
 # CONFIG_R8169 is not set
 # CONFIG_SK98LIN is not set
 CONFIG_TIGON3=m
+# CONFIG_BNX2 is not set
+# CONFIG_MV643XX_ETH is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -630,18 +632,6 @@ CONFIG_INPUT_JOYDEV=m
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
 #
 # Input Device Drivers
 #
@@ -659,6 +649,16 @@ CONFIG_INPUT_MOUSE=y
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
 #
 # Character devices
 #
@@ -676,6 +676,7 @@ CONFIG_HW_CONSOLE=y
 # Non-8250 serial port support
 #
 # CONFIG_SERIAL_PMACZILOG is not set
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -698,9 +699,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Ftape, the floppy tape device driver
 #
+CONFIG_AGP=m
+CONFIG_AGP_UNINORTH=m
 # CONFIG_DRM is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HANGCHECK_TIMER is not set
 
 #
 # TPM devices
@@ -730,12 +734,11 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_ISA is not set
 CONFIG_I2C_KEYWEST=y
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
 # CONFIG_SCx200_ACB is not set
@@ -772,6 +775,7 @@ CONFIG_I2C_KEYWEST=y
 # CONFIG_SENSORS_LM85 is not set
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
@@ -785,6 +789,7 @@ CONFIG_I2C_KEYWEST=y
 #
 # Other I2C Chip support
 #
+# CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -817,6 +822,11 @@ CONFIG_I2C_KEYWEST=y
 # Graphics support
 #
 CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+CONFIG_FB_MACMODES=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 # CONFIG_FB_CIRRUS is not set
@@ -830,6 +840,7 @@ CONFIG_FB_OF=y
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
 # CONFIG_FB_VGA16 is not set
+# CONFIG_FB_NVIDIA is not set
 CONFIG_FB_RIVA=y
 # CONFIG_FB_RIVA_I2C is not set
 # CONFIG_FB_RIVA_DEBUG is not set
@@ -847,6 +858,7 @@ CONFIG_FB_RADEON_I2C=y
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
 # CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -880,6 +892,8 @@ CONFIG_LCD_DEVICE=y
 #
 # USB support
 #
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -890,8 +904,6 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
 
 #
 # USB Host Controller Drivers
@@ -917,7 +929,6 @@ CONFIG_USB_PRINTER=y
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_RW_DETECT=y
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
 CONFIG_USB_STORAGE_ISD200=y
@@ -1004,8 +1015,10 @@ CONFIG_USB_MON=y
 #
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRPRIME is not set
 CONFIG_USB_SERIAL_BELKIN=m
 CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
@@ -1034,6 +1047,7 @@ CONFIG_USB_SERIAL_KLSI=m
 CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
 CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
 CONFIG_USB_SERIAL_SAFE_PADDED=y
 CONFIG_USB_SERIAL_TI=m
@@ -1270,11 +1284,13 @@ CONFIG_OPROFILE=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_PRINTK_TIME is not set
+CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set

arch/ppc64/configs/iSeries_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc3-bk6
-# Wed Feb  9 23:34:52 2005
+# Linux kernel version: 2.6.12-rc6
+# Tue Jun 14 17:01:28 2005
 #
 CONFIG_64BIT=y
 CONFIG_MMU=y
@@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_HAVE_DEC_LOCK=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
-CONFIG_FRAME_POINTER=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 
 #
@@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -30,24 +31,29 @@ CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=17
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -79,6 +85,8 @@ CONFIG_NR_CPUS=32
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_MSCHUNKS=y
 CONFIG_LPARCFG=y
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
 
 #
 # General setup
@@ -89,16 +97,13 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_PCI_LEGACY_PROC=y
 CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
 #
 # CONFIG_PCCARD is not set
 
-#
-# PC-card bridges
-#
-
 #
 # PCI Hotplug Support
 #
@@ -210,7 +215,6 @@ CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
@@ -219,7 +223,6 @@ CONFIG_SCSI_IBMVSCSI=m
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA2XXX=y
@@ -228,6 +231,7 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_SCSI_QLA2300 is not set
 # CONFIG_SCSI_QLA2322 is not set
 # CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -250,6 +254,7 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
+# CONFIG_DM_MULTIPATH is not set
 
 #
 # Fusion MPT device support
@@ -280,7 +285,6 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
 CONFIG_NET_KEY=m
 CONFIG_INET=y
@@ -445,7 +449,6 @@ CONFIG_PCNET32=y
 # CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
@@ -471,6 +474,7 @@ CONFIG_E1000=m
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -538,14 +542,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
 #
 # Input Device Drivers
 #
@@ -555,6 +551,12 @@ CONFIG_SOUND_GAMEPORT=y
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
 #
 # Character devices
 #
@@ -570,6 +572,7 @@ CONFIG_SOUND_GAMEPORT=y
 #
 CONFIG_SERIAL_CORE=m
 CONFIG_SERIAL_ICOM=m
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -592,9 +595,16 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Ftape, the floppy tape device driver
 #
+# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
 
 #
 # I2C support
@@ -633,13 +643,9 @@ CONFIG_MAX_RAW_DEVS=256
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -848,10 +854,13 @@ CONFIG_OPROFILE=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
@@ -881,6 +890,7 @@ CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m

arch/ppc64/configs/maple_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc3-bk6
-# Wed Feb  9 23:34:53 2005
+# Linux kernel version: 2.6.12-rc6
+# Tue Jun 14 17:12:48 2005
 #
 CONFIG_64BIT=y
 CONFIG_MMU=y
@@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_HAVE_DEC_LOCK=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
-CONFIG_FRAME_POINTER=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 
 #
@@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -30,24 +31,28 @@ CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_AUDIT is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -84,6 +89,8 @@ CONFIG_NR_CPUS=2
 # CONFIG_SCHED_SMT is not set
 # CONFIG_PREEMPT is not set
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
 
 #
 # General setup
@@ -94,16 +101,13 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_PCI_LEGACY_PROC=y
 CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
 #
 # CONFIG_PCCARD is not set
 
-#
-# PC-card bridges
-#
-
 #
 # PCI Hotplug Support
 #
@@ -261,7 +265,6 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -376,6 +379,8 @@ CONFIG_E1000=y
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_MV643XX_ETH is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -431,14 +436,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
 #
 # Input Device Drivers
 #
@@ -448,6 +445,12 @@ CONFIG_SOUND_GAMEPORT=y
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
 #
 # Character devices
 #
@@ -469,7 +472,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_PMACZILOG is not set
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -492,8 +495,15 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Ftape, the floppy tape device driver
 #
+# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
 
 #
 # I2C support
@@ -518,8 +528,8 @@ CONFIG_I2C_ALGOBIT=y
 CONFIG_I2C_AMD8111=y
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_ISA is not set
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
@@ -545,7 +555,9 @@ CONFIG_I2C_AMD8111=y
 # CONFIG_SENSORS_ASB100 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
 # CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
 # CONFIG_SENSORS_LM75 is not set
@@ -556,9 +568,11 @@ CONFIG_I2C_AMD8111=y
 # CONFIG_SENSORS_LM85 is not set
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
@@ -568,6 +582,7 @@ CONFIG_I2C_AMD8111=y
 #
 # Other I2C Chip support
 #
+# CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -615,6 +630,8 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -625,8 +642,6 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
 
 #
 # USB Host Controller Drivers
@@ -635,6 +650,8 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_SPLIT_ISO=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_SL811_HCD is not set
 
@@ -688,6 +705,7 @@ CONFIG_USB_HIDINPUT=y
 CONFIG_USB_PEGASUS=y
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -699,8 +717,10 @@ CONFIG_USB_PEGASUS=y
 CONFIG_USB_SERIAL=y
 # CONFIG_USB_SERIAL_CONSOLE is not set
 CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 # CONFIG_USB_SERIAL_EMPEG is not set
 # CONFIG_USB_SERIAL_FTDI_SIO is not set
@@ -729,6 +749,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 # CONFIG_USB_SERIAL_KOBIL_SCT is not set
 # CONFIG_USB_SERIAL_MCT_U232 is not set
 # CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
 CONFIG_USB_SERIAL_TI=m
 # CONFIG_USB_SERIAL_CYBERJACK is not set
@@ -750,6 +771,7 @@ CONFIG_USB_EZUSB=y
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -936,10 +958,13 @@ CONFIG_NLS_UTF8=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_SCHEDSTATS is not set
 CONFIG_DEBUG_SLAB=y
+# CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
@@ -971,6 +996,7 @@ CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set

arch/ppc64/configs/pSeries_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc3-bk6
-# Wed Feb  9 23:34:54 2005
+# Linux kernel version: 2.6.12-rc6
+# Tue Jun 14 17:13:47 2005
 #
 CONFIG_64BIT=y
 CONFIG_MMU=y
@@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_HAVE_DEC_LOCK=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
-CONFIG_FRAME_POINTER=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 
 #
@@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -30,24 +31,29 @@ CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=17
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_CPUSETS=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -89,9 +95,12 @@ CONFIG_SCHED_SMT=y
 CONFIG_EEH=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_PPC_RTAS=y
+CONFIG_RTAS_PROC=y
 CONFIG_RTAS_FLASH=m
 CONFIG_SCANLOG=m
 CONFIG_LPARCFG=y
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
 
 #
 # General setup
@@ -102,6 +111,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_PCI_LEGACY_PROC=y
 CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 CONFIG_HOTPLUG_CPU=y
 
 #
@@ -109,10 +119,6 @@ CONFIG_HOTPLUG_CPU=y
 #
 # CONFIG_PCCARD is not set
 
-#
-# PC-card bridges
-#
-
 #
 # PCI Hotplug Support
 #
@@ -147,11 +153,10 @@ CONFIG_FW_LOADER=y
 #
 CONFIG_PARPORT=m
 CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_PC_CML1=m
 # CONFIG_PARPORT_SERIAL is not set
 # CONFIG_PARPORT_PC_FIFO is not set
 # CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_OTHER is not set
+# CONFIG_PARPORT_GSC is not set
 # CONFIG_PARPORT_1284 is not set
 
 #
@@ -293,7 +298,6 @@ CONFIG_SCSI_ISCSI_ATTRS=m
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
@@ -310,7 +314,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 CONFIG_SCSI_IPR=y
 CONFIG_SCSI_IPR_TRACE=y
 CONFIG_SCSI_IPR_DUMP=y
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA2XXX=y
@@ -319,6 +322,7 @@ CONFIG_SCSI_QLA22XX=m
 CONFIG_SCSI_QLA2300=m
 CONFIG_SCSI_QLA2322=m
 CONFIG_SCSI_QLA6312=m
+CONFIG_SCSI_LPFC=m
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -341,6 +345,8 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
 
 #
 # Fusion MPT device support
@@ -371,7 +377,6 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
 CONFIG_NET_KEY=m
 CONFIG_INET=y
@@ -539,7 +544,6 @@ CONFIG_PCNET32=y
 # CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
@@ -565,6 +569,8 @@ CONFIG_E1000=y
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
+# CONFIG_MV643XX_ETH is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -635,20 +641,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-
 #
 # Input Device Drivers
 #
@@ -668,6 +660,18 @@ CONFIG_INPUT_MISC=y
 CONFIG_INPUT_PCSPKR=m
 # CONFIG_INPUT_UINPUT is not set
 
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
 #
 # Character devices
 #
@@ -689,8 +693,8 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_PMACZILOG is not set
 CONFIG_SERIAL_ICOM=m
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -718,9 +722,16 @@ CONFIG_HVCS=m
 #
 # Ftape, the floppy tape device driver
 #
+# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=1024
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
 
 #
 # I2C support
@@ -745,8 +756,8 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_ISA is not set
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
@@ -773,7 +784,9 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_SENSORS_ASB100 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
 # CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
 # CONFIG_SENSORS_LM75 is not set
@@ -784,9 +797,11 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_SENSORS_LM85 is not set
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
@@ -796,6 +811,7 @@ CONFIG_I2C_ALGOBIT=y
 #
 # Other I2C Chip support
 #
+# CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -828,8 +844,13 @@ CONFIG_I2C_ALGOBIT=y
 # Graphics support
 #
 CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+CONFIG_FB_MACMODES=y
 CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_TILEBLITTING=y
 # CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
@@ -838,6 +859,7 @@ CONFIG_FB_OF=y
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
 # CONFIG_FB_VGA16 is not set
+# CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 CONFIG_FB_MATROX=y
 CONFIG_FB_MATROX_MILLENIUM=y
@@ -858,6 +880,7 @@ CONFIG_FB_RADEON_I2C=y
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
 # CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -891,6 +914,8 @@ CONFIG_LCD_DEVICE=y
 #
 # USB support
 #
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -901,8 +926,6 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
 
 #
 # USB Host Controller Drivers
@@ -911,6 +934,8 @@ CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 
@@ -926,12 +951,11 @@ CONFIG_USB_OHCI_HCD=y
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_HP8200e is not set
+# CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
@@ -975,6 +999,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1000,6 +1025,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -1208,10 +1234,13 @@ CONFIG_OPROFILE=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
@@ -1243,6 +1272,7 @@ CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m

arch/ppc64/defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc3-bk6
-# Wed Feb  9 23:34:51 2005
+# Linux kernel version: 2.6.12-rc5-git9
+# Sun Jun  5 09:26:47 2005
 #
 CONFIG_64BIT=y
 CONFIG_MMU=y
@@ -11,7 +11,7 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_HAVE_DEC_LOCK=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
-CONFIG_FRAME_POINTER=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 
 #
@@ -20,6 +20,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -30,24 +31,28 @@ CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_AUDIT is not set
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_CPUSETS=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -91,9 +96,12 @@ CONFIG_DISCONTIGMEM=y
 CONFIG_EEH=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_PPC_RTAS=y
+CONFIG_RTAS_PROC=y
 CONFIG_RTAS_FLASH=m
 CONFIG_SCANLOG=m
 CONFIG_LPARCFG=y
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
 
 #
 # General setup
@@ -104,6 +112,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 # CONFIG_PCI_LEGACY_PROC is not set
 # CONFIG_PCI_NAMES is not set
+# CONFIG_PCI_DEBUG is not set
 CONFIG_HOTPLUG_CPU=y
 
 #
@@ -111,10 +120,6 @@ CONFIG_HOTPLUG_CPU=y
 #
 # CONFIG_PCCARD is not set
 
-#
-# PC-card bridges
-#
-
 #
 # PCI Hotplug Support
 #
@@ -149,11 +154,10 @@ CONFIG_FW_LOADER=y
 #
 CONFIG_PARPORT=m
 CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_PC_CML1=m
 # CONFIG_PARPORT_SERIAL is not set
 # CONFIG_PARPORT_PC_FIFO is not set
 # CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_OTHER is not set
+# CONFIG_PARPORT_GSC is not set
 # CONFIG_PARPORT_1284 is not set
 
 #
@@ -301,6 +305,7 @@ CONFIG_SCSI_SATA_SVW=y
 # CONFIG_SCSI_ATA_PIIX is not set
 # CONFIG_SCSI_SATA_NV is not set
 # CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
 # CONFIG_SCSI_SATA_SX4 is not set
 # CONFIG_SCSI_SATA_SIL is not set
 # CONFIG_SCSI_SATA_SIS is not set
@@ -310,7 +315,6 @@ CONFIG_SCSI_SATA_SVW=y
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
@@ -327,7 +331,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 CONFIG_SCSI_IPR=y
 CONFIG_SCSI_IPR_TRACE=y
 CONFIG_SCSI_IPR_DUMP=y
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA2XXX=y
@@ -336,6 +339,7 @@ CONFIG_SCSI_QLA22XX=m
 CONFIG_SCSI_QLA2300=m
 CONFIG_SCSI_QLA2322=m
 CONFIG_SCSI_QLA6312=m
+CONFIG_SCSI_LPFC=m
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 CONFIG_SCSI_DEBUG=m
@@ -358,6 +362,8 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
 
 #
 # Fusion MPT device support
@@ -405,6 +411,7 @@ CONFIG_IEEE1394_AMDTP=m
 #
 CONFIG_ADB=y
 CONFIG_ADB_PMU=y
+CONFIG_PMAC_SMU=y
 # CONFIG_PMAC_PBOOK is not set
 # CONFIG_PMAC_BACKLIGHT is not set
 # CONFIG_INPUT_ADBHID is not set
@@ -420,7 +427,6 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
 CONFIG_NET_KEY=m
 CONFIG_INET=y
@@ -588,7 +594,6 @@ CONFIG_PCNET32=y
 # CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
@@ -614,6 +619,8 @@ CONFIG_E1000=y
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
+# CONFIG_MV643XX_ETH is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -682,20 +689,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
 
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-
 #
 # Input Device Drivers
 #
@@ -715,6 +708,18 @@ CONFIG_INPUT_MISC=y
 CONFIG_INPUT_PCSPKR=m
 # CONFIG_INPUT_UINPUT is not set
 
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
 #
 # Character devices
 #
@@ -738,6 +743,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_PMACZILOG is not set
 CONFIG_SERIAL_ICOM=m
+CONFIG_SERIAL_JSM=m
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -766,9 +772,16 @@ CONFIG_HVCS=m
 #
 # Ftape, the floppy tape device driver
 #
+# CONFIG_AGP is not set
 # CONFIG_DRM is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
 
 #
 # I2C support
@@ -793,9 +806,9 @@ CONFIG_I2C_ALGOBIT=y
 CONFIG_I2C_AMD8111=y
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_ISA is not set
 CONFIG_I2C_KEYWEST=y
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
@@ -822,7 +835,9 @@ CONFIG_I2C_KEYWEST=y
 # CONFIG_SENSORS_ASB100 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
 # CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
 # CONFIG_SENSORS_LM75 is not set
@@ -833,9 +848,11 @@ CONFIG_I2C_KEYWEST=y
 # CONFIG_SENSORS_LM85 is not set
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
@@ -845,6 +862,7 @@ CONFIG_I2C_KEYWEST=y
 #
 # Other I2C Chip support
 #
+# CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -877,6 +895,11 @@ CONFIG_I2C_KEYWEST=y
 # Graphics support
 #
 CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+CONFIG_FB_MACMODES=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 # CONFIG_FB_CIRRUS is not set
@@ -890,9 +913,8 @@ CONFIG_FB_OF=y
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
 # CONFIG_FB_VGA16 is not set
-CONFIG_FB_RIVA=y
-CONFIG_FB_RIVA_I2C=y
-# CONFIG_FB_RIVA_DEBUG is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
 CONFIG_FB_MATROX=y
 CONFIG_FB_MATROX_MILLENIUM=y
 CONFIG_FB_MATROX_MYSTIQUE=y
@@ -913,6 +935,7 @@ CONFIG_FB_RADEON_I2C=y
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
 # CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -946,6 +969,8 @@ CONFIG_LCD_DEVICE=y
 #
 # USB support
 #
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -956,8 +981,6 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
 
 #
 # USB Host Controller Drivers
@@ -966,6 +989,8 @@ CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 
@@ -981,12 +1006,11 @@ CONFIG_USB_OHCI_HCD=y
 #
 CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_RW_DETECT=y
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_HP8200e is not set
+# CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
@@ -1030,6 +1054,7 @@ CONFIG_USB_HIDDEV=y
 CONFIG_USB_PEGASUS=y
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -1055,6 +1080,7 @@ CONFIG_USB_PEGASUS=y
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -1276,10 +1302,13 @@ CONFIG_OPROFILE=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
@@ -1311,6 +1340,7 @@ CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m

arch/ppc64/kernel/kprobes.c

@@ -45,12 +45,17 @@ static struct pt_regs jprobe_saved_regs;
 
 int arch_prepare_kprobe(struct kprobe *p)
 {
+	int ret = 0;
 	kprobe_opcode_t insn = *p->addr;
 
-	if (IS_MTMSRD(insn) || IS_RFID(insn))
-		/* cannot put bp on RFID/MTMSRD */
-		return 1;
-	return 0;
+	if ((unsigned long)p->addr & 0x03) {
+		printk("Attempt to register kprobe at an unaligned address\n");
+		ret = -EINVAL;
+	} else if (IS_MTMSRD(insn) || IS_RFID(insn)) {
+		printk("Cannot register a kprobe on rfid or mtmsrd\n");
+		ret = -EINVAL;
+	}
+	return ret;
 }
 
 void arch_copy_kprobe(struct kprobe *p)
@@ -172,8 +177,6 @@ static void resume_execution(struct kprobe *p, struct pt_regs *regs)
 	ret = emulate_step(regs, p->ainsn.insn[0]);
 	if (ret == 0)
 		regs->nip = (unsigned long)p->addr + 4;
-
-	regs->msr &= ~MSR_SE;
 }
 
 static inline int post_kprobe_handler(struct pt_regs *regs)
@@ -210,6 +213,7 @@ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr)
 
 	if (kprobe_status & KPROBE_HIT_SS) {
 		resume_execution(current_kprobe, regs);
+		regs->msr &= ~MSR_SE;
 		regs->msr |= kprobe_saved_msr;
 
 		unlock_kprobes();
@@ -233,8 +237,6 @@ int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val,
 	 */
 	preempt_disable();
 	switch (val) {
-	case DIE_IABR_MATCH:
-	case DIE_DABR_MATCH:
 	case DIE_BPT:
 		if (kprobe_handler(args->regs))
 			ret = NOTIFY_STOP;

arch/ppc64/kernel/misc.S

@@ -792,7 +792,7 @@ _GLOBAL(sys_call_table32)
 	.llong .compat_sys_newstat
 	.llong .compat_sys_newlstat
 	.llong .compat_sys_newfstat
-	.llong .sys_uname
+	.llong .sys32_uname
 	.llong .sys_ni_syscall		/* 110 old iopl syscall */
 	.llong .sys_vhangup
 	.llong .sys_ni_syscall		/* old idle syscall */

arch/ppc64/kernel/sys_ppc32.c

@@ -791,31 +791,6 @@ asmlinkage int sys32_pciconfig_iobase(u32 which, u32 in_bus, u32 in_devfn)
 }
 
 
-asmlinkage int ppc64_newuname(struct new_utsname __user * name)
-{
-	int errno = sys_newuname(name);
-
-	if (current->personality == PER_LINUX32 && !errno) {
-		if(copy_to_user(name->machine, "ppc\0\0", 8)) {
-			errno = -EFAULT;
-		}
-	}
-	return errno;
-}
-
-asmlinkage int ppc64_personality(unsigned long personality)
-{
-	int ret;
-	if (current->personality == PER_LINUX32 && personality == PER_LINUX)
-		personality = PER_LINUX32;
-	ret = sys_personality(personality);
-	if (ret == PER_LINUX32)
-		ret = PER_LINUX;
-	return ret;
-}
-
-
-
 /* Note: it is necessary to treat mode as an unsigned int,
  * with the corresponding cast to a signed int to insure that the 
  * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
@@ -1158,26 +1133,47 @@ asmlinkage long sys32_sysctl(struct __sysctl_args32 __user *args)
 }
 #endif
 
+asmlinkage int sys32_uname(struct old_utsname __user * name)
+{
+	int err = 0;
+	
+	down_read(&uts_sem);
+	if (copy_to_user(name, &system_utsname, sizeof(*name)))
+		err = -EFAULT;
+	up_read(&uts_sem);
+	if (!err && personality(current->personality) == PER_LINUX32) {
+		/* change "ppc64" to "ppc" */
+		if (__put_user(0, name->machine + 3)
+		    || __put_user(0, name->machine + 4))
+			err = -EFAULT;
+	}
+	return err;
+}
+
 asmlinkage int sys32_olduname(struct oldold_utsname __user * name)
 {
 	int error;
-	
-	if (!name)
-		return -EFAULT;
+
 	if (!access_ok(VERIFY_WRITE,name,sizeof(struct oldold_utsname)))
 		return -EFAULT;
   
 	down_read(&uts_sem);
 	error = __copy_to_user(&name->sysname,&system_utsname.sysname,__OLD_UTS_LEN);
-	error -= __put_user(0,name->sysname+__OLD_UTS_LEN);
-	error -= __copy_to_user(&name->nodename,&system_utsname.nodename,__OLD_UTS_LEN);
-	error -= __put_user(0,name->nodename+__OLD_UTS_LEN);
-	error -= __copy_to_user(&name->release,&system_utsname.release,__OLD_UTS_LEN);
-	error -= __put_user(0,name->release+__OLD_UTS_LEN);
-	error -= __copy_to_user(&name->version,&system_utsname.version,__OLD_UTS_LEN);
-	error -= __put_user(0,name->version+__OLD_UTS_LEN);
-	error -= __copy_to_user(&name->machine,&system_utsname.machine,__OLD_UTS_LEN);
-	error = __put_user(0,name->machine+__OLD_UTS_LEN);
+	error |= __put_user(0,name->sysname+__OLD_UTS_LEN);
+	error |= __copy_to_user(&name->nodename,&system_utsname.nodename,__OLD_UTS_LEN);
+	error |= __put_user(0,name->nodename+__OLD_UTS_LEN);
+	error |= __copy_to_user(&name->release,&system_utsname.release,__OLD_UTS_LEN);
+	error |= __put_user(0,name->release+__OLD_UTS_LEN);
+	error |= __copy_to_user(&name->version,&system_utsname.version,__OLD_UTS_LEN);
+	error |= __put_user(0,name->version+__OLD_UTS_LEN);
+	error |= __copy_to_user(&name->machine,&system_utsname.machine,__OLD_UTS_LEN);
+	error |= __put_user(0,name->machine+__OLD_UTS_LEN);
+	if (personality(current->personality) == PER_LINUX32) {
+		/* change "ppc64" to "ppc" */
+		error |= __put_user(0, name->machine + 3);
+		error |= __put_user(0, name->machine + 4);
+	}
+	
 	up_read(&uts_sem);
 
 	error = error ? -EFAULT : 0;

arch/ppc64/kernel/syscalls.c

@@ -199,24 +199,33 @@ out:
 	return ret;
 }
 
-static int __init set_fakeppc(char *str)
+long ppc64_personality(unsigned long personality)
 {
-	if (*str)
-		return 0;
-	init_task.personality = PER_LINUX32;
-	return 1;
+	long ret;
+
+	if (personality(current->personality) == PER_LINUX32
+	    && personality == PER_LINUX)
+		personality = PER_LINUX32;
+	ret = sys_personality(personality);
+	if (ret == PER_LINUX32)
+		ret = PER_LINUX;
+	return ret;
 }
-__setup("fakeppc", set_fakeppc);
 
-asmlinkage int sys_uname(struct old_utsname __user * name)
+long ppc64_newuname(struct new_utsname __user * name)
 {
-	int err = -EFAULT;
-	
+	int err = 0;
+
 	down_read(&uts_sem);
-	if (name && !copy_to_user(name, &system_utsname, sizeof (*name)))
-		err = 0;
+	if (copy_to_user(name, &system_utsname, sizeof(*name)))
+		err = -EFAULT;
 	up_read(&uts_sem);
-	
+	if (!err && personality(current->personality) == PER_LINUX32) {
+		/* change ppc64 to ppc */
+		if (__put_user(0, name->machine + 3)
+		    || __put_user(0, name->machine + 4))
+			err = -EFAULT;
+	}
 	return err;
 }
 

arch/s390/appldata/appldata_base.c

@@ -28,6 +28,7 @@
 //#include <linux/kernel_stat.h>
 #include <linux/notifier.h>
 #include <linux/cpu.h>
+#include <linux/workqueue.h>
 
 #include "appldata.h"
 
@@ -133,9 +134,12 @@ static int appldata_interval = APPLDATA_CPU_INTERVAL;
 static int appldata_timer_active;
 
 /*
- * Tasklet
+ * Work queue
  */
-static struct tasklet_struct appldata_tasklet_struct;
+static struct workqueue_struct *appldata_wq;
+static void appldata_work_fn(void *data);
+static DECLARE_WORK(appldata_work, appldata_work_fn, NULL);
+
 
 /*
  * Ops list
@@ -144,11 +148,11 @@ static DEFINE_SPINLOCK(appldata_ops_lock);
 static LIST_HEAD(appldata_ops_list);
 
 
-/************************* timer, tasklet, DIAG ******************************/
+/*************************** timer, work, DIAG *******************************/
 /*
  * appldata_timer_function()
  *
- * schedule tasklet and reschedule timer
+ * schedule work and reschedule timer
  */
 static void appldata_timer_function(unsigned long data, struct pt_regs *regs)
 {
@@ -157,22 +161,22 @@ static void appldata_timer_function(unsigned long data, struct pt_regs *regs)
 		atomic_read(&appldata_expire_count));
 	if (atomic_dec_and_test(&appldata_expire_count)) {
 		atomic_set(&appldata_expire_count, num_online_cpus());
-		tasklet_schedule((struct tasklet_struct *) data);
+		queue_work(appldata_wq, (struct work_struct *) data);
 	}
 }
 
 /*
- * appldata_tasklet_function()
+ * appldata_work_fn()
  *
  * call data gathering function for each (active) module
  */
-static void appldata_tasklet_function(unsigned long data)
+static void appldata_work_fn(void *data)
 {
 	struct list_head *lh;
 	struct appldata_ops *ops;
 	int i;
 
-	P_DEBUG("  -= Tasklet =-\n");
+	P_DEBUG("  -= Work Queue =-\n");
 	i = 0;
 	spin_lock(&appldata_ops_lock);
 	list_for_each(lh, &appldata_ops_list) {
@@ -231,7 +235,7 @@ static int appldata_diag(char record_nr, u16 function, unsigned long buffer,
 			: "=d" (ry) : "d" (&(appldata_parameter_list)) : "cc");
 	return (int) ry;
 }
-/********************** timer, tasklet, DIAG <END> ***************************/
+/************************ timer, work, DIAG <END> ****************************/
 
 
 /****************************** /proc stuff **********************************/
@@ -411,7 +415,7 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp,
 	struct list_head *lh;
 
 	found = 0;
-	spin_lock_bh(&appldata_ops_lock);
+	spin_lock(&appldata_ops_lock);
 	list_for_each(lh, &appldata_ops_list) {
 		tmp_ops = list_entry(lh, struct appldata_ops, list);
 		if (&tmp_ops->ctl_table[2] == ctl) {
@@ -419,15 +423,15 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp,
 		}
 	}
 	if (!found) {
-		spin_unlock_bh(&appldata_ops_lock);
+		spin_unlock(&appldata_ops_lock);
 		return -ENODEV;
 	}
 	ops = ctl->data;
 	if (!try_module_get(ops->owner)) {	// protect this function
-		spin_unlock_bh(&appldata_ops_lock);
+		spin_unlock(&appldata_ops_lock);
 		return -ENODEV;
 	}
-	spin_unlock_bh(&appldata_ops_lock);
+	spin_unlock(&appldata_ops_lock);
 
 	if (!*lenp || *ppos) {
 		*lenp = 0;
@@ -451,10 +455,11 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp,
 		return -EFAULT;
 	}
 
-	spin_lock_bh(&appldata_ops_lock);
+	spin_lock(&appldata_ops_lock);
 	if ((buf[0] == '1') && (ops->active == 0)) {
-		if (!try_module_get(ops->owner)) {	// protect tasklet
-			spin_unlock_bh(&appldata_ops_lock);
+		// protect work queue callback
+		if (!try_module_get(ops->owner)) {
+			spin_unlock(&appldata_ops_lock);
 			module_put(ops->owner);
 			return -ENODEV;
 		}
@@ -485,7 +490,7 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp,
 		}
 		module_put(ops->owner);
 	}
-	spin_unlock_bh(&appldata_ops_lock);
+	spin_unlock(&appldata_ops_lock);
 out:
 	*lenp = len;
 	*ppos += len;
@@ -529,7 +534,7 @@ int appldata_register_ops(struct appldata_ops *ops)
 	}
 	memset(ops->ctl_table, 0, 4*sizeof(struct ctl_table));
 
-	spin_lock_bh(&appldata_ops_lock);
+	spin_lock(&appldata_ops_lock);
 	list_for_each(lh, &appldata_ops_list) {
 		tmp_ops = list_entry(lh, struct appldata_ops, list);
 		P_DEBUG("register_ops loop: %i) name = %s, ctl = %i\n",
@@ -541,18 +546,18 @@ int appldata_register_ops(struct appldata_ops *ops)
 				APPLDATA_PROC_NAME_LENGTH) == 0) {
 			P_ERROR("Name \"%s\" already registered!\n", ops->name);
 			kfree(ops->ctl_table);
-			spin_unlock_bh(&appldata_ops_lock);
+			spin_unlock(&appldata_ops_lock);
 			return -EBUSY;
 		}
 		if (tmp_ops->ctl_nr == ops->ctl_nr) {
 			P_ERROR("ctl_nr %i already registered!\n", ops->ctl_nr);
 			kfree(ops->ctl_table);
-			spin_unlock_bh(&appldata_ops_lock);
+			spin_unlock(&appldata_ops_lock);
 			return -EBUSY;
 		}
 	}
 	list_add(&ops->list, &appldata_ops_list);
-	spin_unlock_bh(&appldata_ops_lock);
+	spin_unlock(&appldata_ops_lock);
 
 	ops->ctl_table[0].ctl_name = CTL_APPLDATA;
 	ops->ctl_table[0].procname = appldata_proc_name;
@@ -583,12 +588,12 @@ int appldata_register_ops(struct appldata_ops *ops)
  */
 void appldata_unregister_ops(struct appldata_ops *ops)
 {
-	spin_lock_bh(&appldata_ops_lock);
+	spin_lock(&appldata_ops_lock);
 	unregister_sysctl_table(ops->sysctl_header);
 	list_del(&ops->list);
 	kfree(ops->ctl_table);
 	ops->ctl_table = NULL;
-	spin_unlock_bh(&appldata_ops_lock);
+	spin_unlock(&appldata_ops_lock);
 	P_INFO("%s-ops unregistered!\n", ops->name);
 }
 /********************** module-ops management <END> **************************/
@@ -602,7 +607,7 @@ appldata_online_cpu(int cpu)
 	init_virt_timer(&per_cpu(appldata_timer, cpu));
 	per_cpu(appldata_timer, cpu).function = appldata_timer_function;
 	per_cpu(appldata_timer, cpu).data = (unsigned long)
-		&appldata_tasklet_struct;
+		&appldata_work;
 	atomic_inc(&appldata_expire_count);
 	spin_lock(&appldata_timer_lock);
 	__appldata_vtimer_setup(APPLDATA_MOD_TIMER);
@@ -615,7 +620,7 @@ appldata_offline_cpu(int cpu)
 	del_virt_timer(&per_cpu(appldata_timer, cpu));
 	if (atomic_dec_and_test(&appldata_expire_count)) {
 		atomic_set(&appldata_expire_count, num_online_cpus());
-		tasklet_schedule(&appldata_tasklet_struct);
+		queue_work(appldata_wq, &appldata_work);
 	}
 	spin_lock(&appldata_timer_lock);
 	__appldata_vtimer_setup(APPLDATA_MOD_TIMER);
@@ -648,7 +653,7 @@ static struct notifier_block __devinitdata appldata_nb = {
 /*
  * appldata_init()
  *
- * init timer and tasklet, register /proc entries
+ * init timer, register /proc entries
  */
 static int __init appldata_init(void)
 {
@@ -657,6 +662,12 @@ static int __init appldata_init(void)
 	P_DEBUG("sizeof(parameter_list) = %lu\n",
 		sizeof(struct appldata_parameter_list));
 
+	appldata_wq = create_singlethread_workqueue("appldata");
+	if (!appldata_wq) {
+		P_ERROR("Could not create work queue\n");
+		return -ENOMEM;
+	}
+
 	for_each_online_cpu(i)
 		appldata_online_cpu(i);
 
@@ -670,7 +681,6 @@ static int __init appldata_init(void)
 	appldata_table[1].de->owner = THIS_MODULE;
 #endif
 
-	tasklet_init(&appldata_tasklet_struct, appldata_tasklet_function, 0);
 	P_DEBUG("Base interface initialized.\n");
 	return 0;
 }
@@ -678,7 +688,7 @@ static int __init appldata_init(void)
 /*
  * appldata_exit()
  *
- * stop timer and tasklet, unregister /proc entries
+ * stop timer, unregister /proc entries
  */
 static void __exit appldata_exit(void)
 {
@@ -690,7 +700,7 @@ static void __exit appldata_exit(void)
 	/*
 	 * ops list should be empty, but just in case something went wrong...
 	 */
-	spin_lock_bh(&appldata_ops_lock);
+	spin_lock(&appldata_ops_lock);
 	list_for_each(lh, &appldata_ops_list) {
 		ops = list_entry(lh, struct appldata_ops, list);
 		rc = appldata_diag(ops->record_nr, APPLDATA_STOP_REC,
@@ -700,7 +710,7 @@ static void __exit appldata_exit(void)
 				"return code: %d\n", ops->name, rc);
 		}
 	}
-	spin_unlock_bh(&appldata_ops_lock);
+	spin_unlock(&appldata_ops_lock);
 
 	for_each_online_cpu(i)
 		appldata_offline_cpu(i);
@@ -709,7 +719,7 @@ static void __exit appldata_exit(void)
 
 	unregister_sysctl_table(appldata_sysctl_header);
 
-	tasklet_kill(&appldata_tasklet_struct);
+	destroy_workqueue(appldata_wq);
 	P_DEBUG("... module unloaded!\n");
 }
 /**************************** init / exit <END> ******************************/

arch/s390/appldata/appldata_mem.c

@@ -68,7 +68,7 @@ struct appldata_mem_data {
 	u64 pgmajfault;		/* page faults (major only) */
 // <-- New in 2.6
 
-} appldata_mem_data;
+} __attribute__((packed)) appldata_mem_data;
 
 
 static inline void appldata_debug_print(struct appldata_mem_data *mem_data)

arch/s390/appldata/appldata_net_sum.c

@@ -57,7 +57,7 @@ struct appldata_net_sum_data {
 	u64 rx_dropped;		/* no space in linux buffers     */
 	u64 tx_dropped;		/* no space available in linux   */
 	u64 collisions;		/* collisions while transmitting */
-} appldata_net_sum_data;
+} __attribute__((packed)) appldata_net_sum_data;
 
 
 static inline void appldata_print_debug(struct appldata_net_sum_data *net_data)

arch/s390/appldata/appldata_os.c

@@ -49,7 +49,7 @@ struct appldata_os_per_cpu {
 	u32 per_cpu_softirq;	/* ... spent in softirqs            */
 	u32 per_cpu_iowait;	/* ... spent while waiting for I/O  */
 // <-- New in 2.6
-};
+} __attribute__((packed));
 
 struct appldata_os_data {
 	u64 timestamp;
@@ -75,7 +75,7 @@ struct appldata_os_data {
 
 	/* per cpu data */
 	struct appldata_os_per_cpu os_cpu[0];
-};
+} __attribute__((packed));
 
 static struct appldata_os_data *appldata_os_data;
 

arch/s390/kernel/ptrace.c

@@ -40,6 +40,7 @@
 #include <asm/pgalloc.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
+#include <asm/unistd.h>
 
 #ifdef CONFIG_S390_SUPPORT
 #include "compat_ptrace.h"
@@ -130,13 +131,19 @@ static int
 peek_user(struct task_struct *child, addr_t addr, addr_t data)
 {
 	struct user *dummy = NULL;
-	addr_t offset, tmp;
+	addr_t offset, tmp, mask;
 
 	/*
 	 * Stupid gdb peeks/pokes the access registers in 64 bit with
 	 * an alignment of 4. Programmers from hell...
 	 */
-	if ((addr & 3) || addr > sizeof(struct user) - __ADDR_MASK)
+	mask = __ADDR_MASK;
+#ifdef CONFIG_ARCH_S390X
+	if (addr >= (addr_t) &dummy->regs.acrs &&
+	    addr < (addr_t) &dummy->regs.orig_gpr2)
+		mask = 3;
+#endif
+	if ((addr & mask) || addr > sizeof(struct user) - __ADDR_MASK)
 		return -EIO;
 
 	if (addr < (addr_t) &dummy->regs.acrs) {
@@ -153,6 +160,16 @@ peek_user(struct task_struct *child, addr_t addr, addr_t data)
 		 * access registers are stored in the thread structure
 		 */
 		offset = addr - (addr_t) &dummy->regs.acrs;
+#ifdef CONFIG_ARCH_S390X
+		/*
+		 * Very special case: old & broken 64 bit gdb reading
+		 * from acrs[15]. Result is a 64 bit value. Read the
+		 * 32 bit acrs[15] value and shift it by 32. Sick...
+		 */
+		if (addr == (addr_t) &dummy->regs.acrs[15])
+			tmp = ((unsigned long) child->thread.acrs[15]) << 32;
+		else
+#endif
 		tmp = *(addr_t *)((addr_t) &child->thread.acrs + offset);
 
 	} else if (addr == (addr_t) &dummy->regs.orig_gpr2) {
@@ -167,6 +184,9 @@ peek_user(struct task_struct *child, addr_t addr, addr_t data)
 		 */
 		offset = addr - (addr_t) &dummy->regs.fp_regs;
 		tmp = *(addr_t *)((addr_t) &child->thread.fp_regs + offset);
+		if (addr == (addr_t) &dummy->regs.fp_regs.fpc)
+			tmp &= (unsigned long) FPC_VALID_MASK
+				<< (BITS_PER_LONG - 32);
 
 	} else if (addr < (addr_t) (&dummy->regs.per_info + 1)) {
 		/*
@@ -191,13 +211,19 @@ static int
 poke_user(struct task_struct *child, addr_t addr, addr_t data)
 {
 	struct user *dummy = NULL;
-	addr_t offset;
+	addr_t offset, mask;
 
 	/*
 	 * Stupid gdb peeks/pokes the access registers in 64 bit with
 	 * an alignment of 4. Programmers from hell indeed...
 	 */
-	if ((addr & 3) || addr > sizeof(struct user) - __ADDR_MASK)
+	mask = __ADDR_MASK;
+#ifdef CONFIG_ARCH_S390X
+	if (addr >= (addr_t) &dummy->regs.acrs &&
+	    addr < (addr_t) &dummy->regs.orig_gpr2)
+		mask = 3;
+#endif
+	if ((addr & mask) || addr > sizeof(struct user) - __ADDR_MASK)
 		return -EIO;
 
 	if (addr < (addr_t) &dummy->regs.acrs) {
@@ -224,6 +250,17 @@ poke_user(struct task_struct *child, addr_t addr, addr_t data)
 		 * access registers are stored in the thread structure
 		 */
 		offset = addr - (addr_t) &dummy->regs.acrs;
+#ifdef CONFIG_ARCH_S390X
+		/*
+		 * Very special case: old & broken 64 bit gdb writing
+		 * to acrs[15] with a 64 bit value. Ignore the lower
+		 * half of the value and write the upper 32 bit to
+		 * acrs[15]. Sick...
+		 */
+		if (addr == (addr_t) &dummy->regs.acrs[15])
+			child->thread.acrs[15] = (unsigned int) (data >> 32);
+		else
+#endif
 		*(addr_t *)((addr_t) &child->thread.acrs + offset) = data;
 
 	} else if (addr == (addr_t) &dummy->regs.orig_gpr2) {
@@ -237,7 +274,8 @@ poke_user(struct task_struct *child, addr_t addr, addr_t data)
 		 * floating point regs. are stored in the thread structure
 		 */
 		if (addr == (addr_t) &dummy->regs.fp_regs.fpc &&
-		    (data & ~FPC_VALID_MASK) != 0)
+		    (data & ~((unsigned long) FPC_VALID_MASK
+			      << (BITS_PER_LONG - 32))) != 0)
 			return -EINVAL;
 		offset = addr - (addr_t) &dummy->regs.fp_regs;
 		*(addr_t *)((addr_t) &child->thread.fp_regs + offset) = data;
@@ -722,6 +760,13 @@ syscall_trace(struct pt_regs *regs, int entryexit)
 	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
 				 ? 0x80 : 0));
 
+	/*
+	 * If the debuffer has set an invalid system call number,
+	 * we prepare to skip the system call restart handling.
+	 */
+	if (!entryexit && regs->gprs[2] >= NR_syscalls)
+		regs->trap = -1;
+
 	/*
 	 * this isn't the same as continuing with a signal, but it will do
 	 * for normal use.  strace only continues with a signal if the

arch/s390/mm/fault.c

@@ -207,7 +207,7 @@ do_exception(struct pt_regs *regs, unsigned long error_code, int is_protection)
 	 * we are not in an interrupt and that there is a 
 	 * user context.
 	 */
-        if (user_address == 0 || in_interrupt() || !mm)
+        if (user_address == 0 || in_atomic() || !mm)
                 goto no_context;
 
 	/*

arch/um/Kconfig_char

@@ -204,5 +204,11 @@ config UML_RANDOM
 	http://sourceforge.net/projects/gkernel/).  rngd periodically reads
 	/dev/hwrng and injects the entropy into /dev/random.
 
+config MMAPPER
+	tristate "iomem emulation driver"
+	help
+	This driver allows a host file to be used as emulated IO memory inside
+	UML.
+
 endmenu
 

arch/um/drivers/Makefile

@@ -22,8 +22,8 @@ obj-y := stdio_console.o fd.o chan_kern.o chan_user.o line.o
 obj-$(CONFIG_SSL) += ssl.o
 obj-$(CONFIG_STDERR_CONSOLE) += stderr_console.o
 
-obj-$(CONFIG_UML_NET_SLIP) += slip.o
-obj-$(CONFIG_UML_NET_SLIRP) += slirp.o
+obj-$(CONFIG_UML_NET_SLIP) += slip.o slip_common.o
+obj-$(CONFIG_UML_NET_SLIRP) += slirp.o slip_common.o
 obj-$(CONFIG_UML_NET_DAEMON) += daemon.o 
 obj-$(CONFIG_UML_NET_MCAST) += mcast.o 
 #obj-$(CONFIG_UML_NET_PCAP) += pcap.o $(PCAP)
@@ -41,6 +41,6 @@ obj-$(CONFIG_UML_WATCHDOG) += harddog.o
 obj-$(CONFIG_BLK_DEV_COW_COMMON) += cow_user.o
 obj-$(CONFIG_UML_RANDOM) += random.o
 
-USER_OBJS := fd.o null.o pty.o tty.o xterm.o
+USER_OBJS := fd.o null.o pty.o tty.o xterm.o slip_common.o
 
 include arch/um/scripts/Makefile.rules

arch/um/drivers/chan_user.c

@@ -143,22 +143,22 @@ static int winch_tramp(int fd, struct tty_struct *tty, int *fd_out)
 {
 	struct winch_data data;
 	unsigned long stack;
-	int fds[2], pid, n, err;
+	int fds[2], n, err;
 	char c;
 
 	err = os_pipe(fds, 1, 1);
 	if(err < 0){
 		printk("winch_tramp : os_pipe failed, err = %d\n", -err);
-		return(err);
+		goto out;
 	}
 
 	data = ((struct winch_data) { .pty_fd 		= fd,
 				      .pipe_fd 		= fds[1],
 				      .close_me 	= fds[0] } );
-	pid = run_helper_thread(winch_thread, &data, 0, &stack, 0);
-	if(pid < 0){
+	err = run_helper_thread(winch_thread, &data, 0, &stack, 0);
+	if(err < 0){
 		printk("fork of winch_thread failed - errno = %d\n", errno);
-		return(pid);
+		goto out_close;
 	}
 
 	os_close_file(fds[1]);
@@ -168,14 +168,22 @@ static int winch_tramp(int fd, struct tty_struct *tty, int *fd_out)
 		printk("winch_tramp : failed to read synchronization byte\n");
 		printk("read failed, err = %d\n", -n);
 		printk("fd %d will not support SIGWINCH\n", fd);
-		*fd_out = -1;
+                err = -EINVAL;
+		goto out_close1;
 	}
-	return(pid);
+	return err ;
+
+ out_close:
+	os_close_file(fds[1]);
+ out_close1:
+	os_close_file(fds[0]);
+ out:
+	return err;
 }
 
 void register_winch(int fd, struct tty_struct *tty)
 {
-	int pid, thread, thread_fd;
+	int pid, thread, thread_fd = -1;
 	int count;
 	char c = 1;
 
@@ -186,7 +194,7 @@ void register_winch(int fd, struct tty_struct *tty)
 	if(!CHOOSE_MODE_PROC(is_tracer_winch, is_skas_winch, pid, fd,
 			     tty) && (pid == -1)){
 		thread = winch_tramp(fd, tty, &thread_fd);
-		if(fd != -1){
+		if(thread > 0){
 			register_winch_irq(thread_fd, fd, thread, tty);
 
 			count = os_write_file(thread_fd, &c, sizeof(c));

arch/um/drivers/mmapper_kern.c

@@ -18,6 +18,7 @@
 #include <linux/slab.h>
 #include <linux/init.h> 
 #include <linux/smp_lock.h>
+#include <linux/miscdevice.h>
 #include <asm/uaccess.h>
 #include <asm/irq.h>
 #include <asm/pgtable.h>
@@ -117,24 +118,39 @@ static struct file_operations mmapper_fops = {
 	.release	= mmapper_release,
 };
 
+static struct miscdevice mmapper_dev = {
+	.minor		= MISC_DYNAMIC_MINOR,
+	.name		= "mmapper",
+	.fops		= &mmapper_fops
+};
+
 static int __init mmapper_init(void)
 {
+	int err;
+
 	printk(KERN_INFO "Mapper v0.1\n");
 
 	v_buf = (char *) find_iomem("mmapper", &mmapper_size);
 	if(mmapper_size == 0){
 		printk(KERN_ERR "mmapper_init - find_iomem failed\n");
-		return(0);
+		goto out;
 	}
 
-	p_buf = __pa(v_buf);
+	err = misc_register(&mmapper_dev);
+	if(err){
+		printk(KERN_ERR "mmapper - misc_register failed, err = %d\n",
+		       err);
+		goto out;
+	}
 
-	devfs_mk_cdev(MKDEV(30, 0), S_IFCHR|S_IRUGO|S_IWUGO, "mmapper");
-	return(0);
+	p_buf = __pa(v_buf);
+out:
+	return 0;
 }
 
 static void mmapper_exit(void)
 {
+	misc_deregister(&mmapper_dev);
 }
 
 module_init(mmapper_init);

arch/um/drivers/net_user.c

@@ -32,7 +32,7 @@ int tap_open_common(void *dev, char *gate_addr)
 	return(0);
 }
 
-void tap_check_ips(char *gate_addr, char *eth_addr)
+void tap_check_ips(char *gate_addr, unsigned char *eth_addr)
 {
 	int tap_addr[4];
 

arch/um/drivers/slip.h

@@ -1,10 +1,7 @@
 #ifndef __UM_SLIP_H
 #define __UM_SLIP_H
 
-#define BUF_SIZE 1500
- /* two bytes each for a (pathological) max packet of escaped chars +  * 
-  * terminating END char + initial END char                            */
-#define ENC_BUF_SIZE (2 * BUF_SIZE + 2)
+#include "slip_common.h"
 
 struct slip_data {
 	void *dev;
@@ -12,28 +9,12 @@ struct slip_data {
 	char *addr;
 	char *gate_addr;
 	int slave;
-	char ibuf[ENC_BUF_SIZE];
-	char obuf[ENC_BUF_SIZE];
-	int more; /* more data: do not read fd until ibuf has been drained */
-	int pos;
-	int esc;
+	struct slip_proto slip;
 };
 
 extern struct net_user_info slip_user_info;
 
-extern int set_umn_addr(int fd, char *addr, char *ptp_addr);
 extern int slip_user_read(int fd, void *buf, int len, struct slip_data *pri);
 extern int slip_user_write(int fd, void *buf, int len, struct slip_data *pri);
 
 #endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */

arch/um/drivers/slip_common.c

@@ -0,0 +1,54 @@
+#include <string.h>
+#include "slip_common.h"
+#include "net_user.h"
+
+int slip_proto_read(int fd, void *buf, int len, struct slip_proto *slip)
+{
+	int i, n, size, start;
+
+	if(slip->more > 0){
+		i = 0;
+		while(i < slip->more){
+			size = slip_unesc(slip->ibuf[i++], slip->ibuf,
+					  &slip->pos, &slip->esc);
+			if(size){
+				memcpy(buf, slip->ibuf, size);
+				memmove(slip->ibuf, &slip->ibuf[i],
+					slip->more - i);
+				slip->more = slip->more - i;
+				return size;
+			}
+		}
+		slip->more = 0;
+	}
+
+	n = net_read(fd, &slip->ibuf[slip->pos],
+		     sizeof(slip->ibuf) - slip->pos);
+	if(n <= 0)
+		return n;
+
+	start = slip->pos;
+	for(i = 0; i < n; i++){
+		size = slip_unesc(slip->ibuf[start + i], slip->ibuf,&slip->pos,
+				  &slip->esc);
+		if(size){
+			memcpy(buf, slip->ibuf, size);
+			memmove(slip->ibuf, &slip->ibuf[start+i+1],
+				n - (i + 1));
+			slip->more = n - (i + 1);
+			return size;
+		}
+	}
+	return 0;
+}
+
+int slip_proto_write(int fd, void *buf, int len, struct slip_proto *slip)
+{
+	int actual, n;
+
+	actual = slip_esc(buf, slip->obuf, len);
+	n = net_write(fd, slip->obuf, actual);
+	if(n < 0)
+		return n;
+	else return len;
+}

arch/um/drivers/slip_proto.h → arch/um/drivers/slip_common.h

@@ -1,10 +1,10 @@
-/* 
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
+#ifndef __UM_SLIP_COMMON_H
+#define __UM_SLIP_COMMON_H
 
-#ifndef __UM_SLIP_PROTO_H__
-#define __UM_SLIP_PROTO_H__
+#define BUF_SIZE 1500
+ /* two bytes each for a (pathological) max packet of escaped chars +  *
+  * terminating END char + initial END char                            */
+#define ENC_BUF_SIZE (2 * BUF_SIZE + 2)
 
 /* SLIP protocol characters. */
 #define SLIP_END             0300	/* indicates end of frame	*/
@@ -12,7 +12,8 @@
 #define SLIP_ESC_END         0334	/* ESC ESC_END means END 'data'	*/
 #define SLIP_ESC_ESC         0335	/* ESC ESC_ESC means ESC 'data'	*/
 
-static inline int slip_unesc(unsigned char c,char *buf,int *pos, int *esc)
+static inline int slip_unesc(unsigned char c, unsigned char *buf, int *pos,
+                             int *esc)
 {
 	int ret;
 
@@ -79,15 +80,25 @@ static inline int slip_esc(unsigned char *s, unsigned char *d, int len)
 	return (ptr - d);
 }
 
-#endif
+struct slip_proto {
+	unsigned char ibuf[ENC_BUF_SIZE];
+	unsigned char obuf[ENC_BUF_SIZE];
+	int more; /* more data: do not read fd until ibuf has been drained */
+	int pos;
+	int esc;
+};
+
+#define SLIP_PROTO_INIT { \
+	.ibuf  	= { '\0' }, \
+	.obuf  	= { '\0' }, \
+        .more	= 0, \
+	.pos	= 0, \
+	.esc	= 0 \
+}
 
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
+extern int slip_proto_read(int fd, void *buf, int len,
+			   struct slip_proto *slip);
+extern int slip_proto_write(int fd, void *buf, int len,
+			    struct slip_proto *slip);
+
+#endif

arch/um/drivers/slip_kern.c

@@ -26,16 +26,16 @@ void slip_init(struct net_device *dev, void *data)
 		  .addr		= NULL,
 		  .gate_addr 	= init->gate_addr,
 		  .slave  	= -1,
-		  .ibuf  	= { '\0' },
-		  .obuf  	= { '\0' },
-		  .pos 		= 0,
-		  .esc 		= 0,
+		  .slip		= SLIP_PROTO_INIT,
 		  .dev 		= dev });
 
 	dev->init = NULL;
+	dev->header_cache_update = NULL;
+	dev->hard_header_cache = NULL;
+	dev->hard_header = NULL;
 	dev->hard_header_len = 0;
-	dev->addr_len = 4;
-	dev->type = ARPHRD_ETHER;
+	dev->addr_len = 0;
+	dev->type = ARPHRD_SLIP;
 	dev->tx_queue_len = 256;
 	dev->flags = IFF_NOARP;
 	printk("SLIP backend - SLIP IP = %s\n", spri->gate_addr);

arch/um/drivers/slip_user.c

@@ -13,7 +13,7 @@
 #include "user.h"
 #include "net_user.h"
 #include "slip.h"
-#include "slip_proto.h"
+#include "slip_common.h"
 #include "helper.h"
 #include "os.h"
 
@@ -77,41 +77,51 @@ static int slip_tramp(char **argv, int fd)
 	err = os_pipe(fds, 1, 0);
 	if(err < 0){
 		printk("slip_tramp : pipe failed, err = %d\n", -err);
-		return(err);
+		goto out;
 	}
 
 	err = 0;
 	pe_data.stdin = fd;
 	pe_data.stdout = fds[1];
 	pe_data.close_me = fds[0];
-	pid = run_helper(slip_pre_exec, &pe_data, argv, NULL);
+	err = run_helper(slip_pre_exec, &pe_data, argv, NULL);
+	if(err < 0)
+		goto out_close;
+	pid = err;
+
+	output_len = page_size();
+	output = um_kmalloc(output_len);
+	if(output == NULL){
+		printk("slip_tramp : failed to allocate output buffer\n");
+		os_kill_process(pid, 1);
+		err = -ENOMEM;
+		goto out_free;
+	}
 
-	if(pid < 0) err = pid;
-	else {
-		output_len = page_size();
-		output = um_kmalloc(output_len);
-		if(output == NULL)
-			printk("slip_tramp : failed to allocate output "
-			       "buffer\n");
-
-		os_close_file(fds[1]);
-		read_output(fds[0], output, output_len);
-		if(output != NULL){
-			printk("%s", output);
-			kfree(output);
-		}
-		CATCH_EINTR(err = waitpid(pid, &status, 0));
-		if(err < 0)
-			err = errno;
-		else if(!WIFEXITED(status) || (WEXITSTATUS(status) != 0)){
-			printk("'%s' didn't exit with status 0\n", argv[0]);
-			err = -EINVAL;
-		}
+	os_close_file(fds[1]);
+	read_output(fds[0], output, output_len);
+	printk("%s", output);
+
+	CATCH_EINTR(err = waitpid(pid, &status, 0));
+	if(err < 0)
+		err = errno;
+	else if(!WIFEXITED(status) || (WEXITSTATUS(status) != 0)){
+		printk("'%s' didn't exit with status 0\n", argv[0]);
+		err = -EINVAL;
 	}
+	else err = 0;
 
 	os_close_file(fds[0]);
 
-	return(err);
+out_free:
+	kfree(output);
+	return err;
+
+out_close:
+	os_close_file(fds[0]);
+	os_close_file(fds[1]);
+out:
+	return err;
 }
 
 static int slip_open(void *data)
@@ -123,21 +133,26 @@ static int slip_open(void *data)
 			 NULL };
 	int sfd, mfd, err;
 
-	mfd = get_pty();
-	if(mfd < 0){
-		printk("umn : Failed to open pty, err = %d\n", -mfd);
-		return(mfd);
+	err = get_pty();
+	if(err < 0){
+		printk("slip-open : Failed to open pty, err = %d\n", -err);
+		goto out;
 	}
-	sfd = os_open_file(ptsname(mfd), of_rdwr(OPENFLAGS()), 0);
-	if(sfd < 0){
-		printk("Couldn't open tty for slip line, err = %d\n", -sfd);
-		os_close_file(mfd);
-		return(sfd);
+	mfd = err;
+
+	err = os_open_file(ptsname(mfd), of_rdwr(OPENFLAGS()), 0);
+	if(err < 0){
+		printk("Couldn't open tty for slip line, err = %d\n", -err);
+		goto out_close;
 	}
-	if(set_up_tty(sfd)) return(-1);
+	sfd = err;
+
+	if(set_up_tty(sfd))
+		goto out_close2;
+
 	pri->slave = sfd;
-	pri->pos = 0;
-	pri->esc = 0;
+	pri->slip.pos = 0;
+	pri->slip.esc = 0;
 	if(pri->gate_addr != NULL){
 		sprintf(version_buf, "%d", UML_NET_VERSION);
 		strcpy(gate_buf, pri->gate_addr);
@@ -146,12 +161,12 @@ static int slip_open(void *data)
 
 		if(err < 0){
 			printk("slip_tramp failed - err = %d\n", -err);
-			return(err);
+			goto out_close2;
 		}
 		err = os_get_ifname(pri->slave, pri->name);
 		if(err < 0){
 			printk("get_ifname failed, err = %d\n", -err);
-			return(err);
+			goto out_close2;
 		}
 		iter_addresses(pri->dev, open_addr, pri->name);
 	}
@@ -160,10 +175,16 @@ static int slip_open(void *data)
 		if(err < 0){
 			printk("Failed to set slip discipline encapsulation - "
 			       "err = %d\n", -err);
-			return(err);
+			goto out_close2;
 		}
 	}
 	return(mfd);
+out_close2:
+	os_close_file(sfd);
+out_close:
+	os_close_file(mfd);
+out:
+	return err;
 }
 
 static void slip_close(int fd, void *data)
@@ -190,48 +211,12 @@ static void slip_close(int fd, void *data)
 
 int slip_user_read(int fd, void *buf, int len, struct slip_data *pri)
 {
-	int i, n, size, start;
-
-	if(pri->more>0) {
-		i = 0;
-		while(i < pri->more) {
-			size = slip_unesc(pri->ibuf[i++],
-					pri->ibuf, &pri->pos, &pri->esc);
-			if(size){
-				memcpy(buf, pri->ibuf, size);
-				memmove(pri->ibuf, &pri->ibuf[i], pri->more-i);
-				pri->more=pri->more-i; 
-				return(size);
-			}
-		}
-		pri->more=0;
-	}
-
-	n = net_read(fd, &pri->ibuf[pri->pos], sizeof(pri->ibuf) - pri->pos);
-	if(n <= 0) return(n);
-
-	start = pri->pos;
-	for(i = 0; i < n; i++){
-		size = slip_unesc(pri->ibuf[start + i],
-				pri->ibuf, &pri->pos, &pri->esc);
-		if(size){
-			memcpy(buf, pri->ibuf, size);
-			memmove(pri->ibuf, &pri->ibuf[start+i+1], n-(i+1));
-			pri->more=n-(i+1); 
-			return(size);
-		}
-	}
-	return(0);
+	return slip_proto_read(fd, buf, len, &pri->slip);
 }
 
 int slip_user_write(int fd, void *buf, int len, struct slip_data *pri)
 {
-	int actual, n;
-
-	actual = slip_esc(buf, pri->obuf, len);
-	n = net_write(fd, pri->obuf, actual);
-	if(n < 0) return(n);
-	else return(len);
+	return slip_proto_write(fd, buf, len, &pri->slip);
 }
 
 static int slip_set_mtu(int mtu, void *data)
@@ -267,14 +252,3 @@ struct net_user_info slip_user_info = {
 	.delete_address = slip_del_addr,
 	.max_packet	= BUF_SIZE
 };
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */

arch/um/drivers/slirp.h

@@ -1,10 +1,7 @@
 #ifndef __UM_SLIRP_H
 #define __UM_SLIRP_H
 
-#define BUF_SIZE 1500
- /* two bytes each for a (pathological) max packet of escaped chars +  * 
-  * terminating END char + initial END char                            */
-#define ENC_BUF_SIZE (2 * BUF_SIZE + 2)
+#include "slip_common.h"
 
 #define SLIRP_MAX_ARGS 100
 /*
@@ -24,28 +21,13 @@ struct slirp_data {
 	struct arg_list_dummy_wrapper argw;
 	int pid;
 	int slave;
-	char ibuf[ENC_BUF_SIZE];
-	char obuf[ENC_BUF_SIZE];
-	int more; /* more data: do not read fd until ibuf has been drained */
-	int pos;
-	int esc;
+	struct slip_proto slip;
 };
 
 extern struct net_user_info slirp_user_info;
 
-extern int set_umn_addr(int fd, char *addr, char *ptp_addr);
 extern int slirp_user_read(int fd, void *buf, int len, struct slirp_data *pri);
-extern int slirp_user_write(int fd, void *buf, int len, struct slirp_data *pri);
+extern int slirp_user_write(int fd, void *buf, int len,
+			    struct slirp_data *pri);
 
 #endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */

arch/um/drivers/slirp_kern.c

@@ -25,10 +25,7 @@ void slirp_init(struct net_device *dev, void *data)
 		{ .argw 	= init->argw,
 		  .pid  	= -1,
 		  .slave  	= -1,
-		  .ibuf  	= { '\0' },
-		  .obuf  	= { '\0' },
-		  .pos 		= 0,
-		  .esc 		= 0,
+		  .slip		= SLIP_PROTO_INIT,
 		  .dev 		= dev });
 
 	dev->init = NULL;

arch/um/drivers/slirp_user.c

@@ -12,7 +12,7 @@
 #include "user.h"
 #include "net_user.h"
 #include "slirp.h"
-#include "slip_proto.h"
+#include "slip_common.h"
 #include "helper.h"
 #include "os.h"
 
@@ -48,47 +48,32 @@ static int slirp_tramp(char **argv, int fd)
 	return(pid);
 }
 
-/* XXX This is just a trivial wrapper around os_pipe */
-static int slirp_datachan(int *mfd, int *sfd)
-{
-	int fds[2], err;
-
-	err = os_pipe(fds, 1, 1);
-	if(err < 0){
-		printk("slirp_datachan: Failed to open pipe, err = %d\n", -err);
-		return(err);
-	}
-
-	*mfd = fds[0];
-	*sfd = fds[1];
-	return(0);
-}
-
 static int slirp_open(void *data)
 {
 	struct slirp_data *pri = data;
-	int sfd, mfd, pid, err;
+	int fds[2], pid, err;
 
-	err = slirp_datachan(&mfd, &sfd);
+	err = os_pipe(fds, 1, 1);
 	if(err)
 		return(err);
 
-	pid = slirp_tramp(pri->argw.argv, sfd);
-
-	if(pid < 0){
-		printk("slirp_tramp failed - errno = %d\n", -pid);
-		os_close_file(sfd);	
-		os_close_file(mfd);	
-		return(pid);
+	err = slirp_tramp(pri->argw.argv, fds[1]);
+	if(err < 0){
+		printk("slirp_tramp failed - errno = %d\n", -err);
+		goto out;
 	}
-
-	pri->slave = sfd;
-	pri->pos = 0;
-	pri->esc = 0;
-
-	pri->pid = pid;
-
-	return(mfd);
+	pid = err;
+
+	pri->slave = fds[1];
+	pri->slip.pos = 0;
+	pri->slip.esc = 0;
+	pri->pid = err;
+
+	return(fds[0]);
+out:
+	os_close_file(fds[0]);
+	os_close_file(fds[1]);
+	return err;
 }
 
 static void slirp_close(int fd, void *data)
@@ -129,48 +114,12 @@ static void slirp_close(int fd, void *data)
 
 int slirp_user_read(int fd, void *buf, int len, struct slirp_data *pri)
 {
-	int i, n, size, start;
-
-	if(pri->more>0) {
-		i = 0;
-		while(i < pri->more) {
-			size = slip_unesc(pri->ibuf[i++],
-					pri->ibuf,&pri->pos,&pri->esc);
-			if(size){
-				memcpy(buf, pri->ibuf, size);
-				memmove(pri->ibuf, &pri->ibuf[i], pri->more-i);
-				pri->more=pri->more-i; 
-				return(size);
-			}
-		}
-		pri->more=0;
-	}
-
-	n = net_read(fd, &pri->ibuf[pri->pos], sizeof(pri->ibuf) - pri->pos);
-	if(n <= 0) return(n);
-
-	start = pri->pos;
-	for(i = 0; i < n; i++){
-		size = slip_unesc(pri->ibuf[start + i],
-				pri->ibuf,&pri->pos,&pri->esc);
-		if(size){
-			memcpy(buf, pri->ibuf, size);
-			memmove(pri->ibuf, &pri->ibuf[start+i+1], n-(i+1));
-			pri->more=n-(i+1); 
-			return(size);
-		}
-	}
-	return(0);
+	return slip_proto_read(fd, buf, len, &pri->slip);
 }
 
 int slirp_user_write(int fd, void *buf, int len, struct slirp_data *pri)
 {
-	int actual, n;
-
-	actual = slip_esc(buf, pri->obuf, len);
-	n = net_write(fd, pri->obuf, actual);
-	if(n < 0) return(n);
-	else return(len);
+	return slip_proto_write(fd, buf, len, &pri->slip);
 }
 
 static int slirp_set_mtu(int mtu, void *data)
@@ -188,14 +137,3 @@ struct net_user_info slirp_user_info = {
 	.delete_address = NULL,
 	.max_packet	= BUF_SIZE
 };
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */

arch/um/drivers/stderr_console.c

@@ -22,9 +22,9 @@ static void stderr_console_write(struct console *console, const char *string,
 }
 
 static struct console stderr_console = {
-	.name		"stderr",
-	.write		stderr_console_write,
-	.flags		CON_PRINTBUFFER,
+	.name		= "stderr",
+	.write		= stderr_console_write,
+	.flags		= CON_PRINTBUFFER,
 };
 
 static int __init stderr_console_init(void)

arch/um/include/mconsole.h

@@ -56,7 +56,7 @@ struct mc_request
 	int as_interrupt;
 
 	int originating_fd;
-	int originlen;
+	unsigned int originlen;
 	unsigned char origin[128];			/* sockaddr_un */
 
 	struct mconsole_request request;

arch/um/include/net_user.h

@@ -35,7 +35,7 @@ extern void *get_output_buffer(int *len_out);
 extern void free_output_buffer(void *buffer);
 
 extern int tap_open_common(void *dev, char *gate_addr);
-extern void tap_check_ips(char *gate_addr, char *eth_addr);
+extern void tap_check_ips(char *gate_addr, unsigned char *eth_addr);
 
 extern void read_output(int fd, char *output_out, int len);
 

arch/um/include/os.h

@@ -136,7 +136,7 @@ extern int os_seek_file(int fd, __u64 offset);
 extern int os_open_file(char *file, struct openflags flags, int mode);
 extern int os_read_file(int fd, void *buf, int len);
 extern int os_write_file(int fd, const void *buf, int count);
-extern int os_file_size(char *file, long long *size_out);
+extern int os_file_size(char *file, unsigned long long *size_out);
 extern int os_file_modtime(char *file, unsigned long *modtime);
 extern int os_pipe(int *fd, int stream, int close_on_exec);
 extern int os_set_fd_async(int fd, int owner);

arch/um/include/sysdep-i386/ptrace.h

@@ -8,6 +8,8 @@
 
 #include "uml-config.h"
 #include "user_constants.h"
+#include "sysdep/faultinfo.h"
+#include "choose-mode.h"
 
 #define MAX_REG_NR (UM_FRAME_SIZE / sizeof(unsigned long))
 #define MAX_REG_OFFSET (UM_FRAME_SIZE)
@@ -58,9 +60,6 @@ extern int sysemu_supported;
 #define PTRACE_SYSEMU_SINGLESTEP 32
 #endif
 
-#include "sysdep/faultinfo.h"
-#include "choose-mode.h"
-
 union uml_pt_regs {
 #ifdef UML_CONFIG_MODE_TT
 	struct tt_regs {

arch/um/include/user_util.h

@@ -41,9 +41,6 @@ extern unsigned long highmem;
 extern char host_info[];
 
 extern char saved_command_line[];
-extern char command_line[];
-
-extern char *tempdir;
 
 extern unsigned long _stext, _etext, _sdata, _edata, __bss_start, _end;
 extern unsigned long _unprotected_end;

arch/um/kernel/main.c

@@ -24,8 +24,6 @@
 #include "mode.h"
 #include "choose-mode.h"
 #include "uml-config.h"
-#include "irq_user.h"
-#include "time_user.h"
 #include "os.h"
 
 /* Set in set_stklim, which is called from main and __wrap_malloc.

arch/um/kernel/process.c

@@ -30,7 +30,6 @@
 #include "init.h"
 #include "os.h"
 #include "uml-config.h"
-#include "ptrace_user.h"
 #include "choose-mode.h"
 #include "mode.h"
 #ifdef UML_CONFIG_MODE_SKAS
@@ -131,7 +130,7 @@ int start_fork_tramp(void *thread_arg, unsigned long temp_stack,
 	return(arg.pid);
 }
 
-static int ptrace_child(void *arg)
+static int ptrace_child(void)
 {
 	int ret;
 	int pid = os_getpid(), ppid = getppid();
@@ -160,20 +159,16 @@ static int ptrace_child(void *arg)
 	_exit(ret);
 }
 
-static int start_ptraced_child(void **stack_out)
+static int start_ptraced_child(void)
 {
-	void *stack;
-	unsigned long sp;
 	int pid, n, status;
 	
-	stack = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE | PROT_EXEC,
-		     MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
-	if(stack == MAP_FAILED)
-		panic("check_ptrace : mmap failed, errno = %d", errno);
-	sp = (unsigned long) stack + PAGE_SIZE - sizeof(void *);
-	pid = clone(ptrace_child, (void *) sp, SIGCHLD, NULL);
+	pid = fork();
+	if(pid == 0)
+		ptrace_child();
+
 	if(pid < 0)
-		panic("check_ptrace : clone failed, errno = %d", errno);
+		panic("check_ptrace : fork failed, errno = %d", errno);
 	CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED));
 	if(n < 0)
 		panic("check_ptrace : wait failed, errno = %d", errno);
@@ -181,7 +176,6 @@ static int start_ptraced_child(void **stack_out)
 		panic("check_ptrace : expected SIGSTOP, got status = %d",
 		      status);
 
-	*stack_out = stack;
 	return(pid);
 }
 
@@ -189,12 +183,12 @@ static int start_ptraced_child(void **stack_out)
  * just avoid using sysemu, not panic, but only if SYSEMU features are broken.
  * So only for SYSEMU features we test mustpanic, while normal host features
  * must work anyway!*/
-static int stop_ptraced_child(int pid, void *stack, int exitcode, int mustpanic)
+static int stop_ptraced_child(int pid, int exitcode, int mustexit)
 {
 	int status, n, ret = 0;
 
 	if(ptrace(PTRACE_CONT, pid, 0, 0) < 0)
-		panic("check_ptrace : ptrace failed, errno = %d", errno);
+		panic("stop_ptraced_child : ptrace failed, errno = %d", errno);
 	CATCH_EINTR(n = waitpid(pid, &status, 0));
 	if(!WIFEXITED(status) || (WEXITSTATUS(status) != exitcode)) {
 		int exit_with = WEXITSTATUS(status);
@@ -205,15 +199,13 @@ static int stop_ptraced_child(int pid, void *stack, int exitcode, int mustpanic)
 		printk("check_ptrace : child exited with exitcode %d, while "
 		      "expecting %d; status 0x%x", exit_with,
 		      exitcode, status);
-		if (mustpanic)
+		if (mustexit)
 			panic("\n");
 		else
 			printk("\n");
 		ret = -1;
 	}
 
-	if(munmap(stack, PAGE_SIZE) < 0)
-		panic("check_ptrace : munmap failed, errno = %d", errno);
 	return ret;
 }
 
@@ -235,12 +227,11 @@ __uml_setup("nosysemu", nosysemu_cmd_param,
 
 static void __init check_sysemu(void)
 {
-	void *stack;
 	int pid, syscall, n, status, count=0;
 
 	printk("Checking syscall emulation patch for ptrace...");
 	sysemu_supported = 0;
-	pid = start_ptraced_child(&stack);
+	pid = start_ptraced_child();
 
 	if(ptrace(PTRACE_SYSEMU, pid, 0, 0) < 0)
 		goto fail;
@@ -258,7 +249,7 @@ static void __init check_sysemu(void)
 		panic("check_sysemu : failed to modify system "
 		      "call return, errno = %d", errno);
 
-	if (stop_ptraced_child(pid, stack, 0, 0) < 0)
+	if (stop_ptraced_child(pid, 0, 0) < 0)
 		goto fail_stopped;
 
 	sysemu_supported = 1;
@@ -266,7 +257,7 @@ static void __init check_sysemu(void)
 	set_using_sysemu(!force_sysemu_disabled);
 
 	printk("Checking advanced syscall emulation patch for ptrace...");
-	pid = start_ptraced_child(&stack);
+	pid = start_ptraced_child();
 	while(1){
 		count++;
 		if(ptrace(PTRACE_SYSEMU_SINGLESTEP, pid, 0, 0) < 0)
@@ -291,7 +282,7 @@ static void __init check_sysemu(void)
 			break;
 		}
 	}
-	if (stop_ptraced_child(pid, stack, 0, 0) < 0)
+	if (stop_ptraced_child(pid, 0, 0) < 0)
 		goto fail_stopped;
 
 	sysemu_supported = 2;
@@ -302,18 +293,17 @@ static void __init check_sysemu(void)
 	return;
 
 fail:
-	stop_ptraced_child(pid, stack, 1, 0);
+	stop_ptraced_child(pid, 1, 0);
 fail_stopped:
 	printk("missing\n");
 }
 
 void __init check_ptrace(void)
 {
-	void *stack;
 	int pid, syscall, n, status;
 
 	printk("Checking that ptrace can change system call numbers...");
-	pid = start_ptraced_child(&stack);
+	pid = start_ptraced_child();
 
 	if (ptrace(PTRACE_OLDSETOPTIONS, pid, 0, (void *)PTRACE_O_TRACESYSGOOD) < 0)
 		panic("check_ptrace: PTRACE_SETOPTIONS failed, errno = %d", errno);
@@ -340,7 +330,7 @@ void __init check_ptrace(void)
 			break;
 		}
 	}
-	stop_ptraced_child(pid, stack, 0, 1);
+	stop_ptraced_child(pid, 0, 1);
 	printk("OK\n");
 	check_sysemu();
 }
@@ -372,11 +362,10 @@ void forward_pending_sigio(int target)
 static inline int check_skas3_ptrace_support(void)
 {
 	struct ptrace_faultinfo fi;
-	void *stack;
 	int pid, n, ret = 1;
 
 	printf("Checking for the skas3 patch in the host...");
-	pid = start_ptraced_child(&stack);
+	pid = start_ptraced_child();
 
 	n = ptrace(PTRACE_FAULTINFO, pid, 0, &fi);
 	if (n < 0) {
@@ -391,7 +380,7 @@ static inline int check_skas3_ptrace_support(void)
 	}
 
 	init_registers(pid);
-	stop_ptraced_child(pid, stack, 1, 1);
+	stop_ptraced_child(pid, 1, 1);
 
 	return(ret);
 }

arch/um/kernel/skas/process_kern.c

@@ -68,8 +68,11 @@ void new_thread_handler(int sig)
 	 * 0 if it just exits
 	 */
 	n = run_kernel_thread(fn, arg, &current->thread.exec_buf);
-	if(n == 1)
+	if(n == 1){
+		/* Handle any immediate reschedules or signals */
+		interrupt_end();
 		userspace(&current->thread.regs.regs);
+	}
 	else do_exit(0);
 }
 
@@ -96,6 +99,8 @@ void fork_handler(int sig)
 	schedule_tail(current->thread.prev_sched);
 	current->thread.prev_sched = NULL;
 
+	/* Handle any immediate reschedules or signals */
+	interrupt_end();
 	userspace(&current->thread.regs.regs);
 }
 

arch/um/kernel/um_arch.c

@@ -26,7 +26,6 @@
 #include "asm/setup.h"
 #include "ubd_user.h"
 #include "asm/current.h"
-#include "asm/setup.h"
 #include "user_util.h"
 #include "kern_util.h"
 #include "kern.h"

arch/um/os-Linux/elf_aux.c

@@ -45,7 +45,11 @@ __init void scan_elf_aux( char **envp)
 				elf_aux_hwcap = auxv->a_un.a_val;
 				break;
 			case AT_PLATFORM:
-				elf_aux_platform = auxv->a_un.a_ptr;
+                                /* elf.h removed the pointer elements from
+                                 * a_un, so we have to use a_val, which is
+                                 * all that's left.
+                                 */
+				elf_aux_platform = (char *) auxv->a_un.a_val;
 				break;
 			case AT_PAGESZ:
 				page_size = auxv->a_un.a_val;

arch/um/os-Linux/file.c

@@ -363,7 +363,7 @@ int os_write_file(int fd, const void *buf, int len)
 		       (int (*)(int, void *, int)) write, copy_to_user_proc));
 }
 
-int os_file_size(char *file, long long *size_out)
+int os_file_size(char *file, unsigned long long *size_out)
 {
 	struct uml_stat buf;
 	int err;

arch/um/scripts/Makefile.rules

@@ -14,7 +14,7 @@ quiet_cmd_make_link = SYMLINK $@
 cmd_make_link       = ln -sf $(srctree)/arch/$(SUBARCH)/$($(notdir $@)-dir)/$(notdir $@) $@
 
 # this needs to be before the foreach, because targets does not accept
-# complete paths like $(obj)/$(f). To make sure this works, use a := assignment,
+# complete paths like $(obj)/$(f). To make sure this works, use a := assignment
 # or we will get $(obj)/$(f) in the "targets" value.
 # Also, this forces you to use the := syntax when assigning to targets.
 # Otherwise the line below will cause an infinite loop (if you don't know why,

arch/x86_64/kernel/aperture.c

@@ -33,12 +33,10 @@ int fallback_aper_force __initdata = 0;
 
 int fix_aperture __initdata = 1;
 
-#define NB_ID_3 (PCI_VENDOR_ID_AMD | (0x1103<<16))
+/* This code runs before the PCI subsystem is initialized, so just
+   access the northbridge directly. */
 
-static struct resource aper_res = {
-	.name = "Aperture",
-	.flags = IORESOURCE_MEM,
-};
+#define NB_ID_3 (PCI_VENDOR_ID_AMD | (0x1103<<16))
 
 static u32 __init allocate_aperture(void) 
 {
@@ -55,24 +53,11 @@ static u32 __init allocate_aperture(void)
 	aper_size = (32 * 1024 * 1024) << fallback_aper_order; 
 
 	/* 
-	 * Aperture has to be naturally aligned. This means an 2GB
-	 * aperture won't have much chances to find a place in the
-	 * lower 4GB of memory.  Unfortunately we cannot move it up
-	 * because that would make the IOMMU useless.
+	 * Aperture has to be naturally aligned. This means an 2GB aperture won't
+	 * have much chances to find a place in the lower 4GB of memory.
+	 * Unfortunately we cannot move it up because that would make the
+	 * IOMMU useless.
 	 */
-
-	/* First try to find some free unused space */
-	if (!allocate_resource(&iomem_resource, &aper_res,
-			       aper_size,
-			       0, 0xffffffff,
-			       aper_size,
-			       NULL, NULL)) {
-		printk(KERN_INFO "Putting aperture at %lx-%lx\n",
-		       aper_res.start, aper_res.end);
-		return aper_res.start;
-	}
-
-	/* No free space found. Go on to waste some memory... */
 	p = __alloc_bootmem_node(nd0, aper_size, aper_size, 0); 
 	if (!p || __pa(p)+aper_size > 0xffffffff) {
 		printk("Cannot allocate aperture memory hole (%p,%uK)\n",
@@ -81,7 +66,7 @@ static u32 __init allocate_aperture(void)
 			free_bootmem_node(nd0, (unsigned long)p, aper_size); 
 		return 0;
 	}
-	printk("Mapping aperture over %d KB of precious RAM @ %lx\n",
+	printk("Mapping aperture over %d KB of RAM @ %lx\n",
 	       aper_size >> 10, __pa(p)); 
 	return (u32)__pa(p); 
 }
@@ -102,16 +87,10 @@ static int __init aperture_valid(char *name, u64 aper_base, u32 aper_size)
 		printk("Aperture from %s pointing to e820 RAM. Ignoring.\n",name);
 		return 0; 
 	} 
-	/* Don't check the resource here because the aperture is usually
-	   in an e820 reserved area, and we allocated these earlier. */
 	return 1;
 } 
 
-/*
- * Find a PCI capability.
- * This code runs before the PCI subsystem is initialized, so just
- * access the northbridge directly.
- */
+/* Find a PCI capability */
 static __u32 __init find_cap(int num, int slot, int func, int cap) 
 { 
 	u8 pos;
@@ -276,6 +255,8 @@ void __init iommu_hole_init(void)
 		   fallback_aper_force) { 
 		printk("Your BIOS doesn't leave a aperture memory hole\n");
 		printk("Please enable the IOMMU option in the BIOS setup\n");
+		printk("This costs you %d MB of RAM\n",
+		       32 << fallback_aper_order);
 
 		aper_order = fallback_aper_order;
 		aper_alloc = allocate_aperture();

drivers/block/cfq-iosched.c

@@ -1202,13 +1202,16 @@ retry:
 		if (new_cfqq) {
 			cfqq = new_cfqq;
 			new_cfqq = NULL;
-		} else if (gfp_mask & __GFP_WAIT) {
+		} else {
 			spin_unlock_irq(cfqd->queue->queue_lock);
 			new_cfqq = kmem_cache_alloc(cfq_pool, gfp_mask);
 			spin_lock_irq(cfqd->queue->queue_lock);
+
+			if (!new_cfqq && !(gfp_mask & __GFP_WAIT))
+				goto out;
+
 			goto retry;
-		} else
-			goto out;
+		}
 
 		memset(cfqq, 0, sizeof(*cfqq));
 

drivers/block/elevator.c

@@ -220,11 +220,6 @@ void elevator_exit(elevator_t *e)
 	kfree(e);
 }
 
-static int elevator_global_init(void)
-{
-	return 0;
-}
-
 int elv_merge(request_queue_t *q, struct request **req, struct bio *bio)
 {
 	elevator_t *e = q->elevator;
@@ -322,7 +317,7 @@ void __elv_add_request(request_queue_t *q, struct request *rq, int where,
 			int nrq = q->rq.count[READ] + q->rq.count[WRITE]
 				  - q->in_flight;
 
-			if (nrq == q->unplug_thresh)
+			if (nrq >= q->unplug_thresh)
 				__generic_unplug_device(q);
 		}
 	} else
@@ -692,8 +687,6 @@ ssize_t elv_iosched_show(request_queue_t *q, char *name)
 	return len;
 }
 
-module_init(elevator_global_init);
-
 EXPORT_SYMBOL(elv_add_request);
 EXPORT_SYMBOL(__elv_add_request);
 EXPORT_SYMBOL(elv_requeue_request);

drivers/block/ub.c

@@ -51,7 +51,7 @@
  * This many LUNs per USB device.
  * Every one of them takes a host, see UB_MAX_HOSTS.
  */
-#define UB_MAX_LUNS   4
+#define UB_MAX_LUNS   9
 
 /*
  */
@@ -2100,7 +2100,7 @@ static int ub_probe(struct usb_interface *intf,
 			nluns = rc;
 			break;
 		}
-		mdelay(100);
+		msleep(100);
 	}
 
 	for (i = 0; i < nluns; i++) {

drivers/char/agp/agp.h

@@ -278,6 +278,8 @@ void agp3_generic_cleanup(void);
 #define AGP_GENERIC_SIZES_ENTRIES 11
 extern struct aper_size_info_16 agp3_generic_sizes[];
 
+#define virt_to_gart(x) (phys_to_gart(virt_to_phys(x)))
+#define gart_to_virt(x) (phys_to_virt(gart_to_phys(x)))
 
 extern int agp_off;
 extern int agp_try_unsupported_boot;

drivers/char/agp/ali-agp.c

@@ -150,7 +150,7 @@ static void *m1541_alloc_page(struct agp_bridge_data *bridge)
 	pci_read_config_dword(agp_bridge->dev, ALI_CACHE_FLUSH_CTRL, &temp);
 	pci_write_config_dword(agp_bridge->dev, ALI_CACHE_FLUSH_CTRL,
 			(((temp & ALI_CACHE_FLUSH_ADDR_MASK) |
-			  virt_to_phys(addr)) | ALI_CACHE_FLUSH_EN ));
+			  virt_to_gart(addr)) | ALI_CACHE_FLUSH_EN ));
 	return addr;
 }
 
@@ -174,7 +174,7 @@ static void m1541_destroy_page(void * addr)
 	pci_read_config_dword(agp_bridge->dev, ALI_CACHE_FLUSH_CTRL, &temp);
 	pci_write_config_dword(agp_bridge->dev, ALI_CACHE_FLUSH_CTRL,
 			(((temp & ALI_CACHE_FLUSH_ADDR_MASK) |
-			  virt_to_phys(addr)) | ALI_CACHE_FLUSH_EN));
+			  virt_to_gart(addr)) | ALI_CACHE_FLUSH_EN));
 	agp_generic_destroy_page(addr);
 }
 

drivers/char/agp/amd-k7-agp.c

@@ -43,7 +43,7 @@ static int amd_create_page_map(struct amd_page_map *page_map)
 
 	SetPageReserved(virt_to_page(page_map->real));
 	global_cache_flush();
-	page_map->remapped = ioremap_nocache(virt_to_phys(page_map->real),
+	page_map->remapped = ioremap_nocache(virt_to_gart(page_map->real),
 					    PAGE_SIZE);
 	if (page_map->remapped == NULL) {
 		ClearPageReserved(virt_to_page(page_map->real));
@@ -154,7 +154,7 @@ static int amd_create_gatt_table(struct agp_bridge_data *bridge)
 
 	agp_bridge->gatt_table_real = (u32 *)page_dir.real;
 	agp_bridge->gatt_table = (u32 __iomem *)page_dir.remapped;
-	agp_bridge->gatt_bus_addr = virt_to_phys(page_dir.real);
+	agp_bridge->gatt_bus_addr = virt_to_gart(page_dir.real);
 
 	/* Get the address for the gart region.
 	 * This is a bus address even on the alpha, b/c its
@@ -167,7 +167,7 @@ static int amd_create_gatt_table(struct agp_bridge_data *bridge)
 
 	/* Calculate the agp offset */
 	for (i = 0; i < value->num_entries / 1024; i++, addr += 0x00400000) {
-		writel(virt_to_phys(amd_irongate_private.gatt_pages[i]->real) | 1,
+		writel(virt_to_gart(amd_irongate_private.gatt_pages[i]->real) | 1,
 			page_dir.remapped+GET_PAGE_DIR_OFF(addr));
 		readl(page_dir.remapped+GET_PAGE_DIR_OFF(addr));	/* PCI Posting. */
 	}