Merge branch 'linus' into core/urgent

Update with Linus tree so fixes for the same can be applied.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

CREDITS

@@ -761,6 +761,10 @@ S: Northampton
 S: NN1 3QT
 S: United Kingdom
 
+N: Massimo Dal Zotto
+E: dz@debian.org
+D: i8k Dell laptop SMM driver
+
 N: Uwe Dannowski
 E: Uwe.Dannowski@ira.uka.de
 W: http://i30www.ira.uka.de/~dannowsk/

Documentation/ABI/testing/sysfs-bus-mei

@@ -0,0 +1,7 @@
+What:		/sys/bus/mei/devices/.../modalias
+Date:		March 2013
+KernelVersion:	3.10
+Contact:	Samuel Ortiz <sameo@linux.intel.com>
+		linux-mei@linux.intel.com
+Description:	Stores the same MODALIAS value emitted by uevent
+		Format: mei:<mei device name>

Documentation/ABI/testing/sysfs-bus-usb

@@ -32,7 +32,7 @@ Date:		January 2008
 KernelVersion:	2.6.25
 Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
 Description:
-		If CONFIG_PM and CONFIG_USB_SUSPEND are enabled, then this file
+		If CONFIG_PM_RUNTIME is enabled then this file
 		is present.  When read, it returns the total time (in msec)
 		that the USB device has been connected to the machine.  This
 		file is read-only.
@@ -45,7 +45,7 @@ Date:		January 2008
 KernelVersion:	2.6.25
 Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
 Description:
-		If CONFIG_PM and CONFIG_USB_SUSPEND are enabled, then this file
+		If CONFIG_PM_RUNTIME is enabled then this file
 		is present.  When read, it returns the total time (in msec)
 		that the USB device has been active, i.e. not in a suspended
 		state.  This file is read-only.
@@ -187,7 +187,7 @@ What:		/sys/bus/usb/devices/.../power/usb2_hardware_lpm
 Date:		September 2011
 Contact:	Andiry Xu <andiry.xu@amd.com>
 Description:
-		If CONFIG_USB_SUSPEND is set and a USB 2.0 lpm-capable device
+		If CONFIG_PM_RUNTIME is set and a USB 2.0 lpm-capable device
 		is plugged in to a xHCI host which support link PM, it will
 		perform a LPM test; if the test is passed and host supports
 		USB2 hardware LPM (xHCI 1.0 feature), USB2 hardware LPM will

Documentation/ABI/testing/sysfs-class-net-mesh

@@ -67,6 +67,14 @@ Description:
                 Defines the penalty which will be applied to an
                 originator message's tq-field on every hop.
 
+What:           /sys/class/net/<mesh_iface>/mesh/network_coding
+Date:           Nov 2012
+Contact:        Martin Hundeboll <martin@hundeboll.net>
+Description:
+                Controls whether Network Coding (using some magic
+                to send fewer wifi packets but still the same
+                content) is enabled or not.
+
 What:           /sys/class/net/<mesh_iface>/mesh/orig_interval
 Date:           May 2010
 Contact:        Marek Lindner <lindner_marek@yahoo.de>

Documentation/ABI/testing/sysfs-devices-lpss_ltr

@@ -0,0 +1,44 @@
+What:		/sys/devices/.../lpss_ltr/
+Date:		March 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../lpss_ltr/ directory is only present for
+		devices included into the Intel Lynxpoint Low Power Subsystem
+		(LPSS).  If present, it contains attributes containing the LTR
+		mode and the values of LTR registers of the device.
+
+What:		/sys/devices/.../lpss_ltr/ltr_mode
+Date:		March 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../lpss_ltr/ltr_mode attribute contains an
+		integer number (0 or 1) indicating whether or not the devices'
+		LTR functionality is working in the software mode (1).
+
+		This attribute is read-only.  If the device's runtime PM status
+		is not "active", attempts to read from this attribute cause
+		-EAGAIN to be returned.
+
+What:		/sys/devices/.../lpss_ltr/auto_ltr
+Date:		March 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../lpss_ltr/auto_ltr attribute contains the
+		current value of the device's AUTO_LTR register (raw)
+		represented as an 8-digit hexadecimal number.
+
+		This attribute is read-only.  If the device's runtime PM status
+		is not "active", attempts to read from this attribute cause
+		-EAGAIN to be returned.
+
+What:		/sys/devices/.../lpss_ltr/sw_ltr
+Date:		March 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../lpss_ltr/auto_ltr attribute contains the
+		current value of the device's SW_LTR register (raw) represented
+		as an 8-digit hexadecimal number.
+
+		This attribute is read-only.  If the device's runtime PM status
+		is not "active", attempts to read from this attribute cause
+		-EAGAIN to be returned.

Documentation/ABI/testing/sysfs-devices-power_resources_wakeup

@@ -0,0 +1,13 @@
+What:		/sys/devices/.../power_resources_wakeup/
+Date:		April 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		The /sys/devices/.../power_resources_wakeup/ directory is only
+		present for device objects representing ACPI device nodes that
+		require ACPI power resources for wakeup signaling.
+
+		If present, it contains symbolic links to device directories
+		representing ACPI power resources that need to be turned on for
+		the given device node to be able to signal wakeup.  The names of
+		the links are the same as the names of the directories they
+		point to.

Documentation/ABI/testing/sysfs-devices-system-cpu

@@ -173,3 +173,15 @@ Description:	Processor frequency boosting control
 		Boosting allows the CPU and the firmware to run at a frequency
 		beyound it's nominal limit.
 		More details can be found in Documentation/cpu-freq/boost.txt
+
+
+What:		/sys/devices/system/cpu/cpu#/crash_notes
+		/sys/devices/system/cpu/cpu#/crash_notes_size
+Date:		April 2013
+Contact:	kexec@lists.infradead.org
+Description:	address and size of the percpu note.
+
+		crash_notes: the physical address of the memory that holds the
+		note of cpu#.
+
+		crash_notes_size: size of the note of cpu#.

Documentation/ABI/testing/sysfs-driver-hid-roccat-isku

@@ -101,7 +101,8 @@ Date:		June 2011
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	When written, this file lets one set the backlight intensity for
 		a specific profile. Profile number is included in written data.
-		The data has to be 10 bytes long.
+		The data has to be 10 bytes long for Isku, IskuFX needs	16 bytes
+		of data.
 		Before reading this file, control has to be written to select
 		which profile to read.
 Users:		http://roccat.sourceforge.net
@@ -141,3 +142,12 @@ Description:	When written, this file lets one trigger easyshift functionality
 		The data has to be 16 bytes long.
 		This file is writeonly.
 Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/talkfx
+Date:		February 2013
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one trigger temporary color schemes
+		from the host.
+		The data has to be 16 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net

Documentation/ABI/testing/sysfs-driver-hid-roccat-konepure

@@ -0,0 +1,105 @@
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/actual_profile
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. actual_profile holds number of actual profile.
+		This value is persistent, so its value determines the profile
+		that's active when the mouse is powered on next time.
+		When written, the mouse activates the set profile immediately.
+		The data has to be 3 bytes long.
+		The mouse will reject invalid data.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/control
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one select which data from which
+		profile will be	read next. The data has to be 3 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/info
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns general data like firmware version.
+		When written, the device can be reset.
+		The data is 6 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/macro
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store a macro with max 500 key/button strokes
+		internally.
+		When written, this file lets one set the sequence for a specific
+		button for a specific profile. Button and profile numbers are
+		included in written data. The data has to be 2082 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/profile_buttons
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When written, this file lets one write the respective profile
+		buttons back to the mouse. The data has to be 59 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/profile_settings
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When written, this file lets one write the respective profile
+		settings back to the mouse. The data has to be 31 bytes long.
+		The mouse will reject invalid data.
+		Which profile to write is determined by the profile number
+		contained in the data.
+		Before reading this file, control has to be written to select
+		which profile to read.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/sensor
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse has a tracking- and a distance-control-unit. These
+		can be activated/deactivated and the lift-off distance can be
+		set. The data has to be 6 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/talk
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	Used to active some easy* functions of the mouse from outside.
+		The data has to be 16 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/tcu
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written a calibration process for the tracking control unit
+		can be initiated/cancelled. Also lets one read/write sensor
+		registers.
+		The data has to be 4 bytes long.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/tcu_image
+Date:		December 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read the mouse returns a 30x30 pixel image of the
+		sampled underground. This works only in the course of a
+		calibration process initiated with tcu.
+		The returned data is 1028 bytes in size.
+		This file is readonly.
+Users:		http://roccat.sourceforge.net

Documentation/ABI/testing/sysfs-firmware-acpi

@@ -18,6 +18,32 @@ Description:
 		yoffset: The number of pixels between the top of the screen
 			 and the top edge of the image.
 
+What:		/sys/firmware/acpi/hotplug/
+Date:		February 2013
+Contact:	Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+Description:
+		There are separate hotplug profiles for different classes of
+		devices supported by ACPI, such as containers, memory modules,
+		processors, PCI root bridges etc.  A hotplug profile for a given
+		class of devices is a collection of settings defining the way
+		that class of devices will be handled by the ACPI core hotplug
+		code.  Those profiles are represented in sysfs as subdirectories
+		of /sys/firmware/acpi/hotplug/.
+
+		The following setting is available to user space for each
+		hotplug profile:
+
+		enabled: If set, the ACPI core will handle notifications of
+			hotplug events associated with the given class of
+			devices and will allow those devices to be ejected with
+			the help of the _EJ0 control method.  Unsetting it
+			effectively disables hotplug for the correspoinding
+			class of devices.
+
+		The value of the above attribute is an integer number: 1 (set)
+		or 0 (unset).  Attempts to write any other values to it will
+		cause -EINVAL to be returned.
+
 What:		/sys/firmware/acpi/interrupts/
 Date:		February 2008
 Contact:	Len Brown <lenb@kernel.org>

Documentation/DocBook/80211.tmpl

@@ -437,7 +437,7 @@
       </section>
 !Finclude/net/mac80211.h ieee80211_get_buffered_bc
 !Finclude/net/mac80211.h ieee80211_beacon_get
-!Finclude/net/mac80211.h ieee80211_sta_eosp_irqsafe
+!Finclude/net/mac80211.h ieee80211_sta_eosp
 !Finclude/net/mac80211.h ieee80211_frame_release_type
 !Finclude/net/mac80211.h ieee80211_sta_ps_transition
 !Finclude/net/mac80211.h ieee80211_sta_ps_transition_ni

Documentation/DocBook/media/dvb/dvbproperty.xml

@@ -1,6 +1,6 @@
 <section id="FE_GET_SET_PROPERTY">
 <title><constant>FE_GET_PROPERTY/FE_SET_PROPERTY</constant></title>
-<para>This section describes the DVB version 5 extention of the DVB-API, also
+<para>This section describes the DVB version 5 extension of the DVB-API, also
 called "S2API", as this API were added to provide support for DVB-S2. It was
 designed to be able to replace the old frontend API. Yet, the DISEQC and
 the capability ioctls weren't implemented yet via the new way.</para>
@@ -903,14 +903,12 @@ enum fe_interleaving {
 			<constant>svalue</constant> is for signed values of the measure (dB measures)
 			and <constant>uvalue</constant> is for unsigned values (counters, relative scale)</para></listitem>
 		<listitem><para><constant>scale</constant> - Scale for the value. It can be:</para>
-			<section id = "fecap-scale-params">
-			<itemizedlist mark='bullet'>
+			<itemizedlist mark='bullet' id="fecap-scale-params">
 				<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - The parameter is supported by the frontend, but it was not possible to collect it (could be a transitory or permanent condition)</para></listitem>
 				<listitem><para><constant>FE_SCALE_DECIBEL</constant> - parameter is a signed value, measured in 1/1000 dB</para></listitem>
 				<listitem><para><constant>FE_SCALE_RELATIVE</constant> - parameter is a unsigned value, where 0 means 0% and 65535 means 100%.</para></listitem>
 				<listitem><para><constant>FE_SCALE_COUNTER</constant> - parameter is a unsigned value that counts the occurrence of an event, like bit error, block error, or lapsed time.</para></listitem>
 			</itemizedlist>
-			</section>
 		</listitem>
 	</itemizedlist>
 	<section id="DTV-STAT-SIGNAL-STRENGTH">
@@ -918,9 +916,9 @@ enum fe_interleaving {
 		<para>Indicates the signal strength level at the analog part of the tuner or of the demod.</para>
 		<para>Possible scales for this metric are:</para>
 		<itemizedlist mark='bullet'>
-			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
-			<listitem><constant>FE_SCALE_DECIBEL</constant> - signal strength is in 0.0001 dBm units, power measured in miliwatts. This value is generally negative.</listitem>
-			<listitem><constant>FE_SCALE_RELATIVE</constant> - The frontend provides a 0% to 100% measurement for power (actually, 0 to 65535).</listitem>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_DECIBEL</constant> - signal strength is in 0.0001 dBm units, power measured in miliwatts. This value is generally negative.</para></listitem>
+			<listitem><para><constant>FE_SCALE_RELATIVE</constant> - The frontend provides a 0% to 100% measurement for power (actually, 0 to 65535).</para></listitem>
 		</itemizedlist>
 	</section>
 	<section id="DTV-STAT-CNR">
@@ -928,9 +926,9 @@ enum fe_interleaving {
 		<para>Indicates the Signal to Noise ratio for the main carrier.</para>
 		<para>Possible scales for this metric are:</para>
 		<itemizedlist mark='bullet'>
-			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
-			<listitem><constant>FE_SCALE_DECIBEL</constant> - Signal/Noise ratio is in 0.0001 dB units.</listitem>
-			<listitem><constant>FE_SCALE_RELATIVE</constant> - The frontend provides a 0% to 100% measurement for Signal/Noise (actually, 0 to 65535).</listitem>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_DECIBEL</constant> - Signal/Noise ratio is in 0.0001 dB units.</para></listitem>
+			<listitem><para><constant>FE_SCALE_RELATIVE</constant> - The frontend provides a 0% to 100% measurement for Signal/Noise (actually, 0 to 65535).</para></listitem>
 		</itemizedlist>
 	</section>
 	<section id="DTV-STAT-PRE-ERROR-BIT-COUNT">
@@ -943,8 +941,8 @@ enum fe_interleaving {
 		      The frontend may reset it when a channel/transponder is tuned.</para>
 		<para>Possible scales for this metric are:</para>
 		<itemizedlist mark='bullet'>
-			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
-			<listitem><constant>FE_SCALE_COUNTER</constant> - Number of error bits counted before the inner coding.</listitem>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_COUNTER</constant> - Number of error bits counted before the inner coding.</para></listitem>
 		</itemizedlist>
 	</section>
 	<section id="DTV-STAT-PRE-TOTAL-BIT-COUNT">
@@ -952,14 +950,14 @@ enum fe_interleaving {
 		<para>Measures the amount of bits received before the inner code block, during the same period as
 		<link linkend="DTV-STAT-PRE-ERROR-BIT-COUNT"><constant>DTV_STAT_PRE_ERROR_BIT_COUNT</constant></link> measurement was taken.</para>
 		<para>It should be noticed that this measurement can be smaller than the total amount of bits on the transport stream,
-		      as the frontend may need to manually restart the measurement, loosing some data between each measurement interval.</para>
+		      as the frontend may need to manually restart the measurement, losing some data between each measurement interval.</para>
 		<para>This measurement is monotonically increased, as the frontend gets more bit count measurements.
 		      The frontend may reset it when a channel/transponder is tuned.</para>
 		<para>Possible scales for this metric are:</para>
 		<itemizedlist mark='bullet'>
-			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
-			<listitem><constant>FE_SCALE_COUNTER</constant> - Number of bits counted while measuring
-				 <link linkend="DTV-STAT-PRE-ERROR-BIT-COUNT"><constant>DTV_STAT_PRE_ERROR_BIT_COUNT</constant></link>.</listitem>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_COUNTER</constant> - Number of bits counted while measuring
+				 <link linkend="DTV-STAT-PRE-ERROR-BIT-COUNT"><constant>DTV_STAT_PRE_ERROR_BIT_COUNT</constant></link>.</para></listitem>
 		</itemizedlist>
 	</section>
 	<section id="DTV-STAT-POST-ERROR-BIT-COUNT">
@@ -972,8 +970,8 @@ enum fe_interleaving {
 		      The frontend may reset it when a channel/transponder is tuned.</para>
 		<para>Possible scales for this metric are:</para>
 		<itemizedlist mark='bullet'>
-			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
-			<listitem><constant>FE_SCALE_COUNTER</constant> - Number of error bits counted after the inner coding.</listitem>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_COUNTER</constant> - Number of error bits counted after the inner coding.</para></listitem>
 		</itemizedlist>
 	</section>
 	<section id="DTV-STAT-POST-TOTAL-BIT-COUNT">
@@ -981,14 +979,14 @@ enum fe_interleaving {
 		<para>Measures the amount of bits received after the inner coding, during the same period as
 		<link linkend="DTV-STAT-POST-ERROR-BIT-COUNT"><constant>DTV_STAT_POST_ERROR_BIT_COUNT</constant></link> measurement was taken.</para>
 		<para>It should be noticed that this measurement can be smaller than the total amount of bits on the transport stream,
-		      as the frontend may need to manually restart the measurement, loosing some data between each measurement interval.</para>
+		      as the frontend may need to manually restart the measurement, losing some data between each measurement interval.</para>
 		<para>This measurement is monotonically increased, as the frontend gets more bit count measurements.
 		      The frontend may reset it when a channel/transponder is tuned.</para>
 		<para>Possible scales for this metric are:</para>
 		<itemizedlist mark='bullet'>
-			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
-			<listitem><constant>FE_SCALE_COUNTER</constant> - Number of bits counted while measuring
-				 <link linkend="DTV-STAT-POST-ERROR-BIT-COUNT"><constant>DTV_STAT_POST_ERROR_BIT_COUNT</constant></link>.</listitem>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_COUNTER</constant> - Number of bits counted while measuring
+				 <link linkend="DTV-STAT-POST-ERROR-BIT-COUNT"><constant>DTV_STAT_POST_ERROR_BIT_COUNT</constant></link>.</para></listitem>
 		</itemizedlist>
 	</section>
 	<section id="DTV-STAT-ERROR-BLOCK-COUNT">
@@ -998,8 +996,8 @@ enum fe_interleaving {
 		      The frontend may reset it when a channel/transponder is tuned.</para>
 		<para>Possible scales for this metric are:</para>
 		<itemizedlist mark='bullet'>
-			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
-			<listitem><constant>FE_SCALE_COUNTER</constant> - Number of error blocks counted after the outer coding.</listitem>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_COUNTER</constant> - Number of error blocks counted after the outer coding.</para></listitem>
 		</itemizedlist>
 	</section>
 	<section id="DTV-STAT-TOTAL-BLOCK-COUNT">
@@ -1011,9 +1009,9 @@ enum fe_interleaving {
 		by <link linkend="DTV-STAT-TOTAL-BLOCK-COUNT"><constant>DTV-STAT-TOTAL-BLOCK-COUNT</constant></link>.</para>
 		<para>Possible scales for this metric are:</para>
 		<itemizedlist mark='bullet'>
-			<listitem><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</listitem>
-			<listitem><constant>FE_SCALE_COUNTER</constant> - Number of blocks counted while measuring
-			<link linkend="DTV-STAT-ERROR-BLOCK-COUNT"><constant>DTV_STAT_ERROR_BLOCK_COUNT</constant></link>.</listitem>
+			<listitem><para><constant>FE_SCALE_NOT_AVAILABLE</constant> - it failed to measure it, or the measurement was not complete yet.</para></listitem>
+			<listitem><para><constant>FE_SCALE_COUNTER</constant> - Number of blocks counted while measuring
+			<link linkend="DTV-STAT-ERROR-BLOCK-COUNT"><constant>DTV_STAT_ERROR_BLOCK_COUNT</constant></link>.</para></listitem>
 		</itemizedlist>
 	</section>
 	</section>

Documentation/DocBook/media/v4l/common.xml

@@ -749,15 +749,6 @@ polarities, frontporch, backporch etc. The <filename>linux/v4l2-dv-timings.h</fi
 header can be used to get the timings of the formats in the <xref linkend="cea861" /> and
 <xref linkend="vesadmt" /> standards.
 	</para>
-	</listitem>
-	<listitem>
-	<para>DV Presets: Digital Video (DV) presets (<emphasis role="bold">deprecated</emphasis>).
-	These are IDs representing a
-video timing at the input/output. Presets are pre-defined timings implemented
-by the hardware according to video standards. A __u32 data type is used to represent
-a preset unlike the bit mask that is used in &v4l2-std-id; allowing future extensions
-to support as many different presets as needed. This API is deprecated in favor of the DV Timings
-API.</para>
 	</listitem>
 	</itemizedlist>
 	<para>To enumerate and query the attributes of the DV timings supported by a device,
@@ -766,11 +757,6 @@ API.</para>
 &VIDIOC-S-DV-TIMINGS; ioctl and to get current DV timings they use the
 &VIDIOC-G-DV-TIMINGS; ioctl. To detect the DV timings as seen by the video receiver applications
 use the &VIDIOC-QUERY-DV-TIMINGS; ioctl.</para>
-	<para>To enumerate and query the attributes of DV presets supported by a device,
-applications use the &VIDIOC-ENUM-DV-PRESETS; ioctl. To get the current DV preset,
-applications use the &VIDIOC-G-DV-PRESET; ioctl and to set a preset they use the
-&VIDIOC-S-DV-PRESET; ioctl. To detect the preset as seen by the video receiver applications
-use the &VIDIOC-QUERY-DV-PRESET; ioctl.</para>
 	<para>Applications can make use of the <xref linkend="input-capabilities" /> and
 <xref linkend="output-capabilities"/> flags to decide what ioctls are available to set the
 video timings for the device.</para>

Documentation/DocBook/media/v4l/compat.xml

@@ -2310,6 +2310,9 @@ more information.</para>
 	<listitem>
 	  <para>Added FM Modulator (FM TX) Extended Control Class: <constant>V4L2_CTRL_CLASS_FM_TX</constant> and their Control IDs.</para>
 	</listitem>
+<listitem>
+	  <para>Added FM Receiver (FM RX) Extended Control Class: <constant>V4L2_CTRL_CLASS_FM_RX</constant> and their Control IDs.</para>
+	</listitem>
 	<listitem>
 	  <para>Added Remote Controller chapter, describing the default Remote Controller mapping for media devices.</para>
 	</listitem>
@@ -2493,6 +2496,23 @@ that used it. It was originally scheduled for removal in 2.6.35.
       </orderedlist>
     </section>
 
+    <section>
+      <title>V4L2 in Linux 3.10</title>
+      <orderedlist>
+        <listitem>
+	  <para>Removed obsolete and unused DV_PRESET ioctls
+	  VIDIOC_G_DV_PRESET, VIDIOC_S_DV_PRESET, VIDIOC_QUERY_DV_PRESET and
+	  VIDIOC_ENUM_DV_PRESET. Remove the related v4l2_input/output capability
+	  flags V4L2_IN_CAP_PRESETS and V4L2_OUT_CAP_PRESETS.
+	  </para>
+        </listitem>
+        <listitem>
+	  <para>Added new debugging ioctl &VIDIOC-DBG-G-CHIP-INFO;.
+	  </para>
+        </listitem>
+      </orderedlist>
+    </section>
+
     <section id="other">
       <title>Relation of V4L2 to other Linux multimedia APIs</title>
 
@@ -2625,8 +2645,8 @@ interfaces and should not be implemented in new drivers.</para>
 <xref linkend="extended-controls" />.</para>
         </listitem>
         <listitem>
-	  <para>&VIDIOC-G-DV-PRESET;, &VIDIOC-S-DV-PRESET;, &VIDIOC-ENUM-DV-PRESETS; and
-	  &VIDIOC-QUERY-DV-PRESET; ioctls. Use the DV Timings API (<xref linkend="dv-timings" />).</para>
+	  <para>VIDIOC_G_DV_PRESET, VIDIOC_S_DV_PRESET, VIDIOC_ENUM_DV_PRESETS and
+	  VIDIOC_QUERY_DV_PRESET ioctls. Use the DV Timings API (<xref linkend="dv-timings" />).</para>
         </listitem>
         <listitem>
 	  <para><constant>VIDIOC_SUBDEV_G_CROP</constant> and

Documentation/DocBook/media/v4l/controls.xml

@@ -2299,6 +2299,12 @@ Possible values are:</entry>
 		</entrytbl>
 	      </row>
 	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER</constant>&nbsp;</entry>
+		<entry>boolean</entry>
+	      </row><row><entry spanname="descr">Repeat the video sequence headers. Repeating these
+headers makes random access to the video stream easier. Applicable to the MPEG1, 2 and 4 encoder.</entry>
+	      </row>
 	      <row>
 		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER</constant>&nbsp;</entry>
 		<entry>boolean</entry>
@@ -3136,6 +3142,13 @@ giving priority to the center of the metered area.</entry>
 		  <entry><constant>V4L2_EXPOSURE_METERING_SPOT</constant>&nbsp;</entry>
 		  <entry>Measure only very small area at the center of the frame.</entry>
 		</row>
+		<row>
+		  <entry><constant>V4L2_EXPOSURE_METERING_MATRIX</constant>&nbsp;</entry>
+		  <entry>A multi-zone metering. The light intensity is measured
+in several points of the frame and the the results are combined. The
+algorithm of the zones selection and their significance in calculating the
+final value is device dependant.</entry>
+		</row>
 	      </tbody>
 	    </entrytbl>
 	  </row>
@@ -3848,7 +3861,7 @@ in Hz. The range and step are driver-specific.</entry>
 	  </row>
 	  <row>
 	    <entry spanname="id"><constant>V4L2_CID_TUNE_PREEMPHASIS</constant>&nbsp;</entry>
-	    <entry>integer</entry>
+	    <entry>enum v4l2_preemphasis</entry>
 	  </row>
 	  <row id="v4l2-preemphasis"><entry spanname="descr">Configures the pre-emphasis value for broadcasting.
 A pre-emphasis filter is applied to the broadcast to accentuate the high audio frequencies.
@@ -4687,4 +4700,76 @@ interface and may change in the future.</para>
       </table>
 
     </section>
+
+    <section id="fm-rx-controls">
+      <title>FM Receiver Control Reference</title>
+
+      <para>The FM Receiver (FM_RX) class includes controls for common features of
+      FM Reception capable devices.</para>
+
+      <table pgwide="1" frame="none" id="fm-rx-control-id">
+      <title>FM_RX Control IDs</title>
+
+      <tgroup cols="4">
+        <colspec colname="c1" colwidth="1*" />
+        <colspec colname="c2" colwidth="6*" />
+        <colspec colname="c3" colwidth="2*" />
+        <colspec colname="c4" colwidth="6*" />
+        <spanspec namest="c1" nameend="c2" spanname="id" />
+        <spanspec namest="c2" nameend="c4" spanname="descr" />
+        <thead>
+          <row>
+            <entry spanname="id" align="left">ID</entry>
+            <entry align="left">Type</entry>
+          </row><row rowsep="1"><entry spanname="descr" align="left">Description</entry>
+          </row>
+        </thead>
+        <tbody valign="top">
+          <row><entry></entry></row>
+          <row>
+            <entry spanname="id"><constant>V4L2_CID_FM_RX_CLASS</constant>&nbsp;</entry>
+            <entry>class</entry>
+          </row><row><entry spanname="descr">The FM_RX class
+descriptor. Calling &VIDIOC-QUERYCTRL; for this control will return a
+description of this control class.</entry>
+          </row>
+          <row>
+            <entry spanname="id"><constant>V4L2_CID_RDS_RECEPTION</constant>&nbsp;</entry>
+            <entry>boolean</entry>
+          </row><row><entry spanname="descr">Enables/disables RDS
+	  reception by the radio tuner</entry>
+          </row>
+          <row>
+	    <entry spanname="id"><constant>V4L2_CID_TUNE_DEEMPHASIS</constant>&nbsp;</entry>
+	    <entry>enum v4l2_deemphasis</entry>
+	  </row>
+	  <row id="v4l2-deemphasis"><entry spanname="descr">Configures the de-emphasis value for reception.
+A de-emphasis filter is applied to the broadcast to accentuate the high audio frequencies.
+Depending on the region, a time constant of either 50 or 75 useconds is used. The enum&nbsp;v4l2_deemphasis
+defines possible values for de-emphasis. Here they are:</entry>
+	</row><row>
+	<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_DEEMPHASIS_DISABLED</constant>&nbsp;</entry>
+		      <entry>No de-emphasis is applied.</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_DEEMPHASIS_50_uS</constant>&nbsp;</entry>
+		      <entry>A de-emphasis of 50 uS is used.</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_DEEMPHASIS_75_uS</constant>&nbsp;</entry>
+		      <entry>A de-emphasis of 75 uS is used.</entry>
+		    </row>
+		  </tbody>
+		</entrytbl>
+
+	  </row>
+          <row><entry></entry></row>
+        </tbody>
+      </tgroup>
+      </table>
+
+      </section>
 </section>

Documentation/DocBook/media/v4l/io.xml

@@ -1145,6 +1145,12 @@ in which case caches have not been used.</entry>
 	    same clock outside V4L2, use
 	    <function>clock_gettime(2)</function> .</entry>
 	  </row>
+	  <row>
+	    <entry><constant>V4L2_BUF_FLAG_TIMESTAMP_COPY</constant></entry>
+	    <entry>0x4000</entry>
+	    <entry>The CAPTURE buffer timestamp has been taken from the
+	    corresponding OUTPUT buffer. This flag applies only to mem2mem devices.</entry>
+	  </row>
 	</tbody>
       </tgroup>
     </table>

Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml

@@ -272,6 +272,16 @@
 	    <entry><constant>MEDIA_ENT_T_V4L2_SUBDEV_LENS</constant></entry>
 	    <entry>Lens controller</entry>
 	  </row>
+	  <row>
+	    <entry><constant>MEDIA_ENT_T_V4L2_SUBDEV_DECODER</constant></entry>
+	    <entry>Video decoder, the basic function of the video decoder is to
+	    accept analogue video from a wide variety of sources such as
+	    broadcast, DVD players, cameras and video cassette recorders, in
+	    either NTSC, PAL or HD format and still occasionally SECAM, separate
+	    it into its component parts, luminance and chrominance, and output
+	    it in some digital video standard, with appropriate embedded timing
+	    signals.</entry>
+	  </row>
 	</tbody>
       </tgroup>
     </table>

Documentation/DocBook/media/v4l/subdev-formats.xml

@@ -93,19 +93,35 @@
 
       <table pgwide="0" frame="none" id="v4l2-mbus-pixelcode-rgb">
 	<title>RGB formats</title>
-	<tgroup cols="11">
+	<tgroup cols="27">
 	  <colspec colname="id" align="left" />
 	  <colspec colname="code" align="center"/>
 	  <colspec colname="bit" />
-	  <colspec colnum="4" colname="b07" align="center" />
-	  <colspec colnum="5" colname="b06" align="center" />
-	  <colspec colnum="6" colname="b05" align="center" />
-	  <colspec colnum="7" colname="b04" align="center" />
-	  <colspec colnum="8" colname="b03" align="center" />
-	  <colspec colnum="9" colname="b02" align="center" />
-	  <colspec colnum="10" colname="b01" align="center" />
-	  <colspec colnum="11" colname="b00" align="center" />
-	  <spanspec namest="b07" nameend="b00" spanname="b0" />
+	  <colspec colnum="4" colname="b23" align="center" />
+	  <colspec colnum="5" colname="b22" align="center" />
+	  <colspec colnum="6" colname="b21" align="center" />
+	  <colspec colnum="7" colname="b20" align="center" />
+	  <colspec colnum="8" colname="b19" align="center" />
+	  <colspec colnum="9" colname="b18" align="center" />
+	  <colspec colnum="10" colname="b17" align="center" />
+	  <colspec colnum="11" colname="b16" align="center" />
+	  <colspec colnum="12" colname="b15" align="center" />
+	  <colspec colnum="13" colname="b14" align="center" />
+	  <colspec colnum="14" colname="b13" align="center" />
+	  <colspec colnum="15" colname="b12" align="center" />
+	  <colspec colnum="16" colname="b11" align="center" />
+	  <colspec colnum="17" colname="b10" align="center" />
+	  <colspec colnum="18" colname="b09" align="center" />
+	  <colspec colnum="19" colname="b08" align="center" />
+	  <colspec colnum="20" colname="b07" align="center" />
+	  <colspec colnum="21" colname="b06" align="center" />
+	  <colspec colnum="22" colname="b05" align="center" />
+	  <colspec colnum="23" colname="b04" align="center" />
+	  <colspec colnum="24" colname="b03" align="center" />
+	  <colspec colnum="25" colname="b02" align="center" />
+	  <colspec colnum="26" colname="b01" align="center" />
+	  <colspec colnum="27" colname="b00" align="center" />
+	  <spanspec namest="b23" nameend="b00" spanname="b0" />
 	  <thead>
 	    <row>
 	      <entry>Identifier</entry>
@@ -117,6 +133,22 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry>Bit</entry>
+	      <entry>23</entry>
+	      <entry>22</entry>
+	      <entry>21</entry>
+	      <entry>20</entry>
+	      <entry>19</entry>
+	      <entry>18</entry>
+	      <entry>17</entry>
+	      <entry>16</entry>
+	      <entry>15</entry>
+	      <entry>14</entry>
+	      <entry>13</entry>
+	      <entry>12</entry>
+	      <entry>11</entry>
+	      <entry>10</entry>
+	      <entry>9</entry>
+	      <entry>8</entry>
 	      <entry>7</entry>
 	      <entry>6</entry>
 	      <entry>5</entry>
@@ -132,6 +164,7 @@
 	      <entry>V4L2_MBUS_FMT_RGB444_2X8_PADHI_BE</entry>
 	      <entry>0x1001</entry>
 	      <entry></entry>
+	      &dash-ent-16;
 	      <entry>0</entry>
 	      <entry>0</entry>
 	      <entry>0</entry>
@@ -145,6 +178,7 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
+	      &dash-ent-16;
 	      <entry>g<subscript>3</subscript></entry>
 	      <entry>g<subscript>2</subscript></entry>
 	      <entry>g<subscript>1</subscript></entry>
@@ -158,6 +192,7 @@
 	      <entry>V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE</entry>
 	      <entry>0x1002</entry>
 	      <entry></entry>
+	      &dash-ent-16;
 	      <entry>g<subscript>3</subscript></entry>
 	      <entry>g<subscript>2</subscript></entry>
 	      <entry>g<subscript>1</subscript></entry>
@@ -171,6 +206,7 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
+	      &dash-ent-16;
 	      <entry>0</entry>
 	      <entry>0</entry>
 	      <entry>0</entry>
@@ -184,6 +220,7 @@
 	      <entry>V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE</entry>
 	      <entry>0x1003</entry>
 	      <entry></entry>
+	      &dash-ent-16;
 	      <entry>0</entry>
 	      <entry>r<subscript>4</subscript></entry>
 	      <entry>r<subscript>3</subscript></entry>
@@ -197,6 +234,7 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
+	      &dash-ent-16;
 	      <entry>g<subscript>2</subscript></entry>
 	      <entry>g<subscript>1</subscript></entry>
 	      <entry>g<subscript>0</subscript></entry>
@@ -210,6 +248,7 @@
 	      <entry>V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE</entry>
 	      <entry>0x1004</entry>
 	      <entry></entry>
+	      &dash-ent-16;
 	      <entry>g<subscript>2</subscript></entry>
 	      <entry>g<subscript>1</subscript></entry>
 	      <entry>g<subscript>0</subscript></entry>
@@ -223,6 +262,7 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
+	      &dash-ent-16;
 	      <entry>0</entry>
 	      <entry>r<subscript>4</subscript></entry>
 	      <entry>r<subscript>3</subscript></entry>
@@ -236,6 +276,7 @@
 	      <entry>V4L2_MBUS_FMT_BGR565_2X8_BE</entry>
 	      <entry>0x1005</entry>
 	      <entry></entry>
+	      &dash-ent-16;
 	      <entry>b<subscript>4</subscript></entry>
 	      <entry>b<subscript>3</subscript></entry>
 	      <entry>b<subscript>2</subscript></entry>
@@ -249,6 +290,7 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
+	      &dash-ent-16;
 	      <entry>g<subscript>2</subscript></entry>
 	      <entry>g<subscript>1</subscript></entry>
 	      <entry>g<subscript>0</subscript></entry>
@@ -262,6 +304,7 @@
 	      <entry>V4L2_MBUS_FMT_BGR565_2X8_LE</entry>
 	      <entry>0x1006</entry>
 	      <entry></entry>
+	      &dash-ent-16;
 	      <entry>g<subscript>2</subscript></entry>
 	      <entry>g<subscript>1</subscript></entry>
 	      <entry>g<subscript>0</subscript></entry>
@@ -275,6 +318,7 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
+	      &dash-ent-16;
 	      <entry>b<subscript>4</subscript></entry>
 	      <entry>b<subscript>3</subscript></entry>
 	      <entry>b<subscript>2</subscript></entry>
@@ -288,6 +332,7 @@
 	      <entry>V4L2_MBUS_FMT_RGB565_2X8_BE</entry>
 	      <entry>0x1007</entry>
 	      <entry></entry>
+	      &dash-ent-16;
 	      <entry>r<subscript>4</subscript></entry>
 	      <entry>r<subscript>3</subscript></entry>
 	      <entry>r<subscript>2</subscript></entry>
@@ -301,6 +346,7 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
+	      &dash-ent-16;
 	      <entry>g<subscript>2</subscript></entry>
 	      <entry>g<subscript>1</subscript></entry>
 	      <entry>g<subscript>0</subscript></entry>
@@ -314,6 +360,7 @@
 	      <entry>V4L2_MBUS_FMT_RGB565_2X8_LE</entry>
 	      <entry>0x1008</entry>
 	      <entry></entry>
+	      &dash-ent-16;
 	      <entry>g<subscript>2</subscript></entry>
 	      <entry>g<subscript>1</subscript></entry>
 	      <entry>g<subscript>0</subscript></entry>
@@ -327,6 +374,27 @@
 	      <entry></entry>
 	      <entry></entry>
 	      <entry></entry>
+	      &dash-ent-16;
+	      <entry>r<subscript>4</subscript></entry>
+	      <entry>r<subscript>3</subscript></entry>
+	      <entry>r<subscript>2</subscript></entry>
+	      <entry>r<subscript>1</subscript></entry>
+	      <entry>r<subscript>0</subscript></entry>
+	      <entry>g<subscript>5</subscript></entry>
+	      <entry>g<subscript>4</subscript></entry>
+	      <entry>g<subscript>3</subscript></entry>
+	    </row>
+	    <row id="V4L2-MBUS-FMT-RGB666-1X18">
+	      <entry>V4L2_MBUS_FMT_RGB666_1X18</entry>
+	      <entry>0x1009</entry>
+	      <entry></entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>r<subscript>5</subscript></entry>
 	      <entry>r<subscript>4</subscript></entry>
 	      <entry>r<subscript>3</subscript></entry>
 	      <entry>r<subscript>2</subscript></entry>
@@ -335,6 +403,124 @@
 	      <entry>g<subscript>5</subscript></entry>
 	      <entry>g<subscript>4</subscript></entry>
 	      <entry>g<subscript>3</subscript></entry>
+	      <entry>g<subscript>2</subscript></entry>
+	      <entry>g<subscript>1</subscript></entry>
+	      <entry>g<subscript>0</subscript></entry>
+	      <entry>b<subscript>5</subscript></entry>
+	      <entry>b<subscript>4</subscript></entry>
+	      <entry>b<subscript>3</subscript></entry>
+	      <entry>b<subscript>2</subscript></entry>
+	      <entry>b<subscript>1</subscript></entry>
+	      <entry>b<subscript>0</subscript></entry>
+	    </row>
+	    <row id="V4L2-MBUS-FMT-RGB888-1X24">
+	      <entry>V4L2_MBUS_FMT_RGB888_1X24</entry>
+	      <entry>0x100a</entry>
+	      <entry></entry>
+	      <entry>r<subscript>7</subscript></entry>
+	      <entry>r<subscript>6</subscript></entry>
+	      <entry>r<subscript>5</subscript></entry>
+	      <entry>r<subscript>4</subscript></entry>
+	      <entry>r<subscript>3</subscript></entry>
+	      <entry>r<subscript>2</subscript></entry>
+	      <entry>r<subscript>1</subscript></entry>
+	      <entry>r<subscript>0</subscript></entry>
+	      <entry>g<subscript>7</subscript></entry>
+	      <entry>g<subscript>6</subscript></entry>
+	      <entry>g<subscript>5</subscript></entry>
+	      <entry>g<subscript>4</subscript></entry>
+	      <entry>g<subscript>3</subscript></entry>
+	      <entry>g<subscript>2</subscript></entry>
+	      <entry>g<subscript>1</subscript></entry>
+	      <entry>g<subscript>0</subscript></entry>
+	      <entry>b<subscript>7</subscript></entry>
+	      <entry>b<subscript>6</subscript></entry>
+	      <entry>b<subscript>5</subscript></entry>
+	      <entry>b<subscript>4</subscript></entry>
+	      <entry>b<subscript>3</subscript></entry>
+	      <entry>b<subscript>2</subscript></entry>
+	      <entry>b<subscript>1</subscript></entry>
+	      <entry>b<subscript>0</subscript></entry>
+	    </row>
+	    <row id="V4L2-MBUS-FMT-RGB888-2X12-BE">
+	      <entry>V4L2_MBUS_FMT_RGB888_2X12_BE</entry>
+	      <entry>0x100b</entry>
+	      <entry></entry>
+	      &dash-ent-10;
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>r<subscript>7</subscript></entry>
+	      <entry>r<subscript>6</subscript></entry>
+	      <entry>r<subscript>5</subscript></entry>
+	      <entry>r<subscript>4</subscript></entry>
+	      <entry>r<subscript>3</subscript></entry>
+	      <entry>r<subscript>2</subscript></entry>
+	      <entry>r<subscript>1</subscript></entry>
+	      <entry>r<subscript>0</subscript></entry>
+	      <entry>g<subscript>7</subscript></entry>
+	      <entry>g<subscript>6</subscript></entry>
+	      <entry>g<subscript>5</subscript></entry>
+	      <entry>g<subscript>4</subscript></entry>
+	    </row>
+	    <row>
+	      <entry></entry>
+	      <entry></entry>
+	      <entry></entry>
+	      &dash-ent-10;
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>g<subscript>3</subscript></entry>
+	      <entry>g<subscript>2</subscript></entry>
+	      <entry>g<subscript>1</subscript></entry>
+	      <entry>g<subscript>0</subscript></entry>
+	      <entry>b<subscript>7</subscript></entry>
+	      <entry>b<subscript>6</subscript></entry>
+	      <entry>b<subscript>5</subscript></entry>
+	      <entry>b<subscript>4</subscript></entry>
+	      <entry>b<subscript>3</subscript></entry>
+	      <entry>b<subscript>2</subscript></entry>
+	      <entry>b<subscript>1</subscript></entry>
+	      <entry>b<subscript>0</subscript></entry>
+	    </row>
+	    <row id="V4L2-MBUS-FMT-RGB888-2X12-LE">
+	      <entry>V4L2_MBUS_FMT_RGB888_2X12_LE</entry>
+	      <entry>0x100c</entry>
+	      <entry></entry>
+	      &dash-ent-10;
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>g<subscript>3</subscript></entry>
+	      <entry>g<subscript>2</subscript></entry>
+	      <entry>g<subscript>1</subscript></entry>
+	      <entry>g<subscript>0</subscript></entry>
+	      <entry>b<subscript>7</subscript></entry>
+	      <entry>b<subscript>6</subscript></entry>
+	      <entry>b<subscript>5</subscript></entry>
+	      <entry>b<subscript>4</subscript></entry>
+	      <entry>b<subscript>3</subscript></entry>
+	      <entry>b<subscript>2</subscript></entry>
+	      <entry>b<subscript>1</subscript></entry>
+	      <entry>b<subscript>0</subscript></entry>
+	    </row>
+	    <row>
+	      <entry></entry>
+	      <entry></entry>
+	      <entry></entry>
+	      &dash-ent-10;
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>r<subscript>7</subscript></entry>
+	      <entry>r<subscript>6</subscript></entry>
+	      <entry>r<subscript>5</subscript></entry>
+	      <entry>r<subscript>4</subscript></entry>
+	      <entry>r<subscript>3</subscript></entry>
+	      <entry>r<subscript>2</subscript></entry>
+	      <entry>r<subscript>1</subscript></entry>
+	      <entry>r<subscript>0</subscript></entry>
+	      <entry>g<subscript>7</subscript></entry>
+	      <entry>g<subscript>6</subscript></entry>
+	      <entry>g<subscript>5</subscript></entry>
+	      <entry>g<subscript>4</subscript></entry>
 	    </row>
 	  </tbody>
 	</tgroup>

Documentation/DocBook/media/v4l/v4l2.xml

@@ -124,6 +124,7 @@ Remote Controller chapter.</contrib>
       <year>2010</year>
       <year>2011</year>
       <year>2012</year>
+      <year>2013</year>
       <holder>Bill Dirks, Michael H. Schimek, Hans Verkuil, Martin
 Rubli, Andy Walls, Muralidharan Karicheri, Mauro Carvalho Chehab,
 	Pawel Osciak</holder>
@@ -139,13 +140,23 @@ structs, ioctls) must be noted in more detail in the history chapter
 (compat.xml), along with the possible impact on existing drivers and
 applications. -->
 
+      <revision>
+	<revnumber>3.10</revnumber>
+	<date>2013-03-25</date>
+	<authorinitials>hv</authorinitials>
+	<revremark>Remove obsolete and unused DV_PRESET ioctls:
+	VIDIOC_G_DV_PRESET, VIDIOC_S_DV_PRESET, VIDIOC_QUERY_DV_PRESET and
+	VIDIOC_ENUM_DV_PRESET. Remove the related v4l2_input/output capability
+	flags V4L2_IN_CAP_PRESETS and V4L2_OUT_CAP_PRESETS. Added VIDIOC_DBG_G_CHIP_INFO.
+	</revremark>
+      </revision>
+
       <revision>
 	<revnumber>3.9</revnumber>
 	<date>2012-12-03</date>
 	<authorinitials>sa, sn</authorinitials>
 	<revremark>Added timestamp types to v4l2_buffer.
-	Added <constant>V4L2_EVENT_CTRL_CH_RANGE</constant> control
-	event changes flag, see <xref linkend="changes-flags"/>.
+	Added V4L2_EVENT_CTRL_CH_RANGE control event changes flag.
 	</revremark>
       </revision>
 
@@ -537,6 +548,7 @@ and discussions on the V4L mailing list.</revremark>
     &sub-create-bufs;
     &sub-cropcap;
     &sub-dbg-g-chip-ident;
+    &sub-dbg-g-chip-info;
     &sub-dbg-g-register;
     &sub-decoder-cmd;
     &sub-dqevent;
@@ -544,7 +556,6 @@ and discussions on the V4L mailing list.</revremark>
     &sub-encoder-cmd;
     &sub-enumaudio;
     &sub-enumaudioout;
-    &sub-enum-dv-presets;
     &sub-enum-dv-timings;
     &sub-enum-fmt;
     &sub-enum-framesizes;
@@ -558,7 +569,6 @@ and discussions on the V4L mailing list.</revremark>
     &sub-g-audioout;
     &sub-g-crop;
     &sub-g-ctrl;
-    &sub-g-dv-preset;
     &sub-g-dv-timings;
     &sub-g-enc-index;
     &sub-g-ext-ctrls;
@@ -582,7 +592,6 @@ and discussions on the V4L mailing list.</revremark>
     &sub-querybuf;
     &sub-querycap;
     &sub-queryctrl;
-    &sub-query-dv-preset;
     &sub-query-dv-timings;
     &sub-querystd;
     &sub-reqbufs;

Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-ident.xml

@@ -200,10 +200,10 @@ the values from <xref linkend="chip-ids" />.</entry>
 	&cs-def;
 	<tbody valign="top">
 	  <row>
-	    <entry><constant>V4L2_CHIP_MATCH_HOST</constant></entry>
+	    <entry><constant>V4L2_CHIP_MATCH_BRIDGE</constant></entry>
 	    <entry>0</entry>
 	    <entry>Match the nth chip on the card, zero for the
-	    host chip. Does not match &i2c; chips.</entry>
+	    bridge chip. Does not match sub-devices.</entry>
 	  </row>
 	  <row>
 	    <entry><constant>V4L2_CHIP_MATCH_I2C_DRIVER</constant></entry>
@@ -220,6 +220,11 @@ the values from <xref linkend="chip-ids" />.</entry>
 	    <entry>3</entry>
 	    <entry>Match the nth anciliary AC97 chip.</entry>
 	  </row>
+	  <row>
+	    <entry><constant>V4L2_CHIP_MATCH_SUBDEV</constant></entry>
+	    <entry>4</entry>
+	    <entry>Match the nth sub-device. Can't be used with this ioctl.</entry>
+	  </row>
 	</tbody>
       </tgroup>
     </table>

Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-info.xml

@@ -0,0 +1,223 @@
+<refentry id="vidioc-dbg-g-chip-info">
+  <refmeta>
+    <refentrytitle>ioctl VIDIOC_DBG_G_CHIP_INFO</refentrytitle>
+    &manvol;
+  </refmeta>
+
+  <refnamediv>
+    <refname>VIDIOC_DBG_G_CHIP_INFO</refname>
+    <refpurpose>Identify the chips on a TV card</refpurpose>
+  </refnamediv>
+
+  <refsynopsisdiv>
+    <funcsynopsis>
+      <funcprototype>
+	<funcdef>int <function>ioctl</function></funcdef>
+	<paramdef>int <parameter>fd</parameter></paramdef>
+	<paramdef>int <parameter>request</parameter></paramdef>
+	<paramdef>struct v4l2_dbg_chip_info
+*<parameter>argp</parameter></paramdef>
+      </funcprototype>
+    </funcsynopsis>
+  </refsynopsisdiv>
+
+  <refsect1>
+    <title>Arguments</title>
+
+    <variablelist>
+      <varlistentry>
+	<term><parameter>fd</parameter></term>
+	<listitem>
+	  <para>&fd;</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>request</parameter></term>
+	<listitem>
+	  <para>VIDIOC_DBG_G_CHIP_INFO</para>
+	</listitem>
+      </varlistentry>
+      <varlistentry>
+	<term><parameter>argp</parameter></term>
+	<listitem>
+	  <para></para>
+	</listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+
+  <refsect1>
+    <title>Description</title>
+
+    <note>
+      <title>Experimental</title>
+
+      <para>This is an <link
+linkend="experimental">experimental</link> interface and may change in
+the future.</para>
+    </note>
+
+    <para>For driver debugging purposes this ioctl allows test
+applications to query the driver about the chips present on the TV
+card. Regular applications must not use it. When you found a chip
+specific bug, please contact the linux-media mailing list (&v4l-ml;)
+so it can be fixed.</para>
+
+    <para>Additionally the Linux kernel must be compiled with the
+<constant>CONFIG_VIDEO_ADV_DEBUG</constant> option to enable this ioctl.</para>
+
+    <para>To query the driver applications must initialize the
+<structfield>match.type</structfield> and
+<structfield>match.addr</structfield> or <structfield>match.name</structfield>
+fields of a &v4l2-dbg-chip-info;
+and call <constant>VIDIOC_DBG_G_CHIP_INFO</constant> with a pointer to
+this structure. On success the driver stores information about the
+selected chip in the <structfield>name</structfield> and
+<structfield>flags</structfield> fields. On failure the structure
+remains unchanged.</para>
+
+    <para>When <structfield>match.type</structfield> is
+<constant>V4L2_CHIP_MATCH_BRIDGE</constant>,
+<structfield>match.addr</structfield> selects the nth bridge 'chip'
+on the TV card. You can enumerate all chips by starting at zero and
+incrementing <structfield>match.addr</structfield> by one until
+<constant>VIDIOC_DBG_G_CHIP_INFO</constant> fails with an &EINVAL;.
+The number zero always selects the bridge chip itself, &eg; the chip
+connected to the PCI or USB bus. Non-zero numbers identify specific
+parts of the bridge chip such as an AC97 register block.</para>
+
+    <para>When <structfield>match.type</structfield> is
+<constant>V4L2_CHIP_MATCH_SUBDEV</constant>,
+<structfield>match.addr</structfield> selects the nth sub-device. This
+allows you to enumerate over all sub-devices.</para>
+
+    <para>On success, the <structfield>name</structfield> field will
+contain a chip name and the <structfield>flags</structfield> field will
+contain <constant>V4L2_CHIP_FL_READABLE</constant> if the driver supports
+reading registers from the device or <constant>V4L2_CHIP_FL_WRITABLE</constant>
+if the driver supports writing registers to the device.</para>
+
+    <para>We recommended the <application>v4l2-dbg</application>
+utility over calling this ioctl directly. It is available from the
+LinuxTV v4l-dvb repository; see <ulink
+url="http://linuxtv.org/repo/">http://linuxtv.org/repo/</ulink> for
+access instructions.</para>
+
+    <!-- Note for convenience vidioc-dbg-g-register.sgml
+	 contains a duplicate of this table. -->
+    <table pgwide="1" frame="none" id="name-v4l2-dbg-match">
+      <title>struct <structname>v4l2_dbg_match</structname></title>
+      <tgroup cols="4">
+	&cs-ustr;
+	<tbody valign="top">
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>type</structfield></entry>
+	    <entry>See <xref linkend="name-chip-match-types" /> for a list of
+possible types.</entry>
+	  </row>
+	  <row>
+	    <entry>union</entry>
+	    <entry>(anonymous)</entry>
+	  </row>
+	  <row>
+	    <entry></entry>
+	    <entry>__u32</entry>
+	    <entry><structfield>addr</structfield></entry>
+	    <entry>Match a chip by this number, interpreted according
+to the <structfield>type</structfield> field.</entry>
+	  </row>
+	  <row>
+	    <entry></entry>
+	    <entry>char</entry>
+	    <entry><structfield>name[32]</structfield></entry>
+	    <entry>Match a chip by this name, interpreted according
+to the <structfield>type</structfield> field.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+
+    <table pgwide="1" frame="none" id="v4l2-dbg-chip-info">
+      <title>struct <structname>v4l2_dbg_chip_info</structname></title>
+      <tgroup cols="3">
+	&cs-str;
+	<tbody valign="top">
+	  <row>
+	    <entry>struct v4l2_dbg_match</entry>
+	    <entry><structfield>match</structfield></entry>
+	    <entry>How to match the chip, see <xref linkend="name-v4l2-dbg-match" />.</entry>
+	  </row>
+	  <row>
+	    <entry>char</entry>
+	    <entry><structfield>name[32]</structfield></entry>
+	    <entry>The name of the chip.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>flags</structfield></entry>
+	    <entry>Set by the driver. If <constant>V4L2_CHIP_FL_READABLE</constant>
+is set, then the driver supports reading registers from the device. If
+<constant>V4L2_CHIP_FL_WRITABLE</constant> is set, then it supports writing registers.</entry>
+	  </row>
+	  <row>
+	    <entry>__u32</entry>
+	    <entry><structfield>reserved[8]</structfield></entry>
+	    <entry>Reserved fields, both application and driver must set these to 0.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+
+    <!-- Note for convenience vidioc-dbg-g-register.sgml
+	 contains a duplicate of this table. -->
+    <table pgwide="1" frame="none" id="name-chip-match-types">
+      <title>Chip Match Types</title>
+      <tgroup cols="3">
+	&cs-def;
+	<tbody valign="top">
+	  <row>
+	    <entry><constant>V4L2_CHIP_MATCH_BRIDGE</constant></entry>
+	    <entry>0</entry>
+	    <entry>Match the nth chip on the card, zero for the
+	    bridge chip. Does not match sub-devices.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CHIP_MATCH_I2C_DRIVER</constant></entry>
+	    <entry>1</entry>
+	    <entry>Match an &i2c; chip by its driver name. Can't be used with this ioctl.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CHIP_MATCH_I2C_ADDR</constant></entry>
+	    <entry>2</entry>
+	    <entry>Match a chip by its 7 bit &i2c; bus address. Can't be used with this ioctl.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CHIP_MATCH_AC97</constant></entry>
+	    <entry>3</entry>
+	    <entry>Match the nth anciliary AC97 chip. Can't be used with this ioctl.</entry>
+	  </row>
+	  <row>
+	    <entry><constant>V4L2_CHIP_MATCH_SUBDEV</constant></entry>
+	    <entry>4</entry>
+	    <entry>Match the nth sub-device.</entry>
+	  </row>
+	</tbody>
+      </tgroup>
+    </table>
+  </refsect1>
+
+  <refsect1>
+    &return-value;
+
+    <variablelist>
+      <varlistentry>
+	<term><errorcode>EINVAL</errorcode></term>
+	<listitem>
+	  <para>The <structfield>match_type</structfield> is invalid or
+no device could be matched.</para>
+	</listitem>
+      </varlistentry>
+     </variablelist>
+  </refsect1>
+</refentry>

Documentation/DocBook/media/v4l/vidioc-dbg-g-register.xml

@@ -87,7 +87,7 @@ written into the register.</para>
 
     <para>To read a register applications must initialize the
 <structfield>match.type</structfield>,
-<structfield>match.chip</structfield> or <structfield>match.name</structfield> and
+<structfield>match.addr</structfield> or <structfield>match.name</structfield> and
 <structfield>reg</structfield> fields, and call
 <constant>VIDIOC_DBG_G_REGISTER</constant> with a pointer to this
 structure. On success the driver stores the register value in the
@@ -95,11 +95,11 @@ structure. On success the driver stores the register value in the
 unchanged.</para>
 
     <para>When <structfield>match.type</structfield> is
-<constant>V4L2_CHIP_MATCH_HOST</constant>,
-<structfield>match.addr</structfield> selects the nth non-&i2c; chip
+<constant>V4L2_CHIP_MATCH_BRIDGE</constant>,
+<structfield>match.addr</structfield> selects the nth non-sub-device chip
 on the TV card.  The number zero always selects the host chip, &eg; the
 chip connected to the PCI or USB bus. You can find out which chips are
-present with the &VIDIOC-DBG-G-CHIP-IDENT; ioctl.</para>
+present with the &VIDIOC-DBG-G-CHIP-INFO; ioctl.</para>
 
     <para>When <structfield>match.type</structfield> is
 <constant>V4L2_CHIP_MATCH_I2C_DRIVER</constant>,
@@ -109,7 +109,7 @@ For instance
 supported by the saa7127 driver, regardless of its &i2c; bus address.
 When multiple chips supported by the same driver are present, the
 effect of these ioctls is undefined. Again with the
-&VIDIOC-DBG-G-CHIP-IDENT; ioctl you can find out which &i2c; chips are
+&VIDIOC-DBG-G-CHIP-INFO; ioctl you can find out which &i2c; chips are
 present.</para>
 
     <para>When <structfield>match.type</structfield> is
@@ -122,19 +122,23 @@ bus address.</para>
 <structfield>match.addr</structfield> selects the nth AC97 chip
 on the TV card.</para>
 
+    <para>When <structfield>match.type</structfield> is
+<constant>V4L2_CHIP_MATCH_SUBDEV</constant>,
+<structfield>match.addr</structfield> selects the nth sub-device.</para>
+
     <note>
       <title>Success not guaranteed</title>
 
       <para>Due to a flaw in the Linux &i2c; bus driver these ioctls may
 return successfully without actually reading or writing a register. To
-catch the most likely failure we recommend a &VIDIOC-DBG-G-CHIP-IDENT;
+catch the most likely failure we recommend a &VIDIOC-DBG-G-CHIP-INFO;
 call confirming the presence of the selected &i2c; chip.</para>
     </note>
 
     <para>These ioctls are optional, not all drivers may support them.
 However when a driver supports these ioctls it must also support
-&VIDIOC-DBG-G-CHIP-IDENT;. Conversely it may support
-<constant>VIDIOC_DBG_G_CHIP_IDENT</constant> but not these ioctls.</para>
+&VIDIOC-DBG-G-CHIP-INFO;. Conversely it may support
+<constant>VIDIOC_DBG_G_CHIP_INFO</constant> but not these ioctls.</para>
 
     <para><constant>VIDIOC_DBG_G_REGISTER</constant> and
 <constant>VIDIOC_DBG_S_REGISTER</constant> were introduced in Linux
@@ -217,10 +221,10 @@ register.</entry>
 	&cs-def;
 	<tbody valign="top">
 	  <row>
-	    <entry><constant>V4L2_CHIP_MATCH_HOST</constant></entry>
+	    <entry><constant>V4L2_CHIP_MATCH_BRIDGE</constant></entry>
 	    <entry>0</entry>
 	    <entry>Match the nth chip on the card, zero for the
-	    host chip. Does not match &i2c; chips.</entry>
+	    bridge chip. Does not match sub-devices.</entry>
 	  </row>
 	  <row>
 	    <entry><constant>V4L2_CHIP_MATCH_I2C_DRIVER</constant></entry>
@@ -237,6 +241,11 @@ register.</entry>
 	    <entry>3</entry>
 	    <entry>Match the nth anciliary AC97 chip.</entry>
 	  </row>
+	  <row>
+	    <entry><constant>V4L2_CHIP_MATCH_SUBDEV</constant></entry>
+	    <entry>4</entry>
+	    <entry>Match the nth sub-device.</entry>
+	  </row>
 	</tbody>
       </tgroup>
     </table>

Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml

@@ -1,240 +0,0 @@
-<refentry id="vidioc-enum-dv-presets">
-  <refmeta>
-    <refentrytitle>ioctl VIDIOC_ENUM_DV_PRESETS</refentrytitle>
-    &manvol;
-  </refmeta>
-
-  <refnamediv>
-    <refname>VIDIOC_ENUM_DV_PRESETS</refname>
-    <refpurpose>Enumerate supported Digital Video presets</refpurpose>
-  </refnamediv>
-
-  <refsynopsisdiv>
-    <funcsynopsis>
-      <funcprototype>
-	<funcdef>int <function>ioctl</function></funcdef>
-	<paramdef>int <parameter>fd</parameter></paramdef>
-	<paramdef>int <parameter>request</parameter></paramdef>
-	<paramdef>struct v4l2_dv_enum_preset *<parameter>argp</parameter></paramdef>
-      </funcprototype>
-    </funcsynopsis>
-  </refsynopsisdiv>
-
-  <refsect1>
-    <title>Arguments</title>
-
-    <variablelist>
-      <varlistentry>
-	<term><parameter>fd</parameter></term>
-	<listitem>
-	  <para>&fd;</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><parameter>request</parameter></term>
-	<listitem>
-	  <para>VIDIOC_ENUM_DV_PRESETS</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><parameter>argp</parameter></term>
-	<listitem>
-	  <para></para>
-	</listitem>
-      </varlistentry>
-    </variablelist>
-  </refsect1>
-
-  <refsect1>
-    <title>Description</title>
-
-    <para>This ioctl is <emphasis role="bold">deprecated</emphasis>.
-    New drivers and applications should use &VIDIOC-ENUM-DV-TIMINGS; instead.
-    </para>
-
-    <para>To query the attributes of a DV preset, applications initialize the
-<structfield>index</structfield> field and zero the reserved array of &v4l2-dv-enum-preset;
-and call the <constant>VIDIOC_ENUM_DV_PRESETS</constant> ioctl with a pointer to this
-structure. Drivers fill the rest of the structure or return an
-&EINVAL; when the index is out of bounds. To enumerate all DV Presets supported,
-applications shall begin at index zero, incrementing by one until the
-driver returns <errorcode>EINVAL</errorcode>. Drivers may enumerate a
-different set of DV presets after switching the video input or
-output.</para>
-
-    <table pgwide="1" frame="none" id="v4l2-dv-enum-preset">
-      <title>struct <structname>v4l2_dv_enum_presets</structname></title>
-      <tgroup cols="3">
-	&cs-str;
-	<tbody valign="top">
-	  <row>
-	    <entry>__u32</entry>
-	    <entry><structfield>index</structfield></entry>
-	    <entry>Number of the DV preset, set by the
-application.</entry>
-	  </row>
-	  <row>
-	    <entry>__u32</entry>
-	    <entry><structfield>preset</structfield></entry>
-	    <entry>This field identifies one of the DV preset values listed in <xref linkend="v4l2-dv-presets-vals"/>.</entry>
-	  </row>
-	  <row>
-	    <entry>__u8</entry>
-	    <entry><structfield>name</structfield>[24]</entry>
-	    <entry>Name of the preset, a NUL-terminated ASCII string, for example: "720P-60", "1080I-60". This information is
-intended for the user.</entry>
-	  </row>
-	  <row>
-	    <entry>__u32</entry>
-	    <entry><structfield>width</structfield></entry>
-	    <entry>Width of the active video in pixels for the DV preset.</entry>
-	  </row>
-	  <row>
-	    <entry>__u32</entry>
-	    <entry><structfield>height</structfield></entry>
-	    <entry>Height of the active video in lines for the DV preset.</entry>
-	  </row>
-	  <row>
-	    <entry>__u32</entry>
-	    <entry><structfield>reserved</structfield>[4]</entry>
-	    <entry>Reserved for future extensions. Drivers must set the array to zero.</entry>
-	  </row>
-	</tbody>
-      </tgroup>
-    </table>
-
-    <table pgwide="1" frame="none" id="v4l2-dv-presets-vals">
-      <title>struct <structname>DV Presets</structname></title>
-      <tgroup cols="3">
-	&cs-str;
-	<tbody valign="top">
-	  <row>
-	    <entry>Preset</entry>
-	    <entry>Preset value</entry>
-	    <entry>Description</entry>
-	  </row>
-	  <row>
-	    <entry></entry>
-	    <entry></entry>
-	    <entry></entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_INVALID</entry>
-	    <entry>0</entry>
-	    <entry>Invalid preset value.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_480P59_94</entry>
-	    <entry>1</entry>
-	    <entry>720x480 progressive video at 59.94 fps as per BT.1362.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_576P50</entry>
-	    <entry>2</entry>
-	    <entry>720x576 progressive video at 50 fps as per BT.1362.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_720P24</entry>
-	    <entry>3</entry>
-	    <entry>1280x720 progressive video at 24 fps as per SMPTE 296M.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_720P25</entry>
-	    <entry>4</entry>
-	    <entry>1280x720 progressive video at 25 fps as per SMPTE 296M.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_720P30</entry>
-	    <entry>5</entry>
-	    <entry>1280x720 progressive video at 30 fps as per SMPTE 296M.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_720P50</entry>
-	    <entry>6</entry>
-	    <entry>1280x720 progressive video at 50 fps as per SMPTE 296M.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_720P59_94</entry>
-	    <entry>7</entry>
-	    <entry>1280x720 progressive video at 59.94 fps as per SMPTE 274M.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_720P60</entry>
-	    <entry>8</entry>
-	    <entry>1280x720 progressive video at 60 fps as per SMPTE 274M/296M.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_1080I29_97</entry>
-	    <entry>9</entry>
-	    <entry>1920x1080 interlaced video at 29.97 fps as per BT.1120/SMPTE 274M.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_1080I30</entry>
-	    <entry>10</entry>
-	    <entry>1920x1080 interlaced video at 30 fps as per BT.1120/SMPTE 274M.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_1080I25</entry>
-	    <entry>11</entry>
-	    <entry>1920x1080 interlaced video at 25 fps as per BT.1120.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_1080I50</entry>
-	    <entry>12</entry>
-	    <entry>1920x1080 interlaced video at 50 fps as per SMPTE 296M.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_1080I60</entry>
-	    <entry>13</entry>
-	    <entry>1920x1080 interlaced video at 60 fps as per SMPTE 296M.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_1080P24</entry>
-	    <entry>14</entry>
-	    <entry>1920x1080 progressive video at 24 fps as per SMPTE 296M.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_1080P25</entry>
-	    <entry>15</entry>
-	    <entry>1920x1080 progressive video at 25 fps as per SMPTE 296M.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_1080P30</entry>
-	    <entry>16</entry>
-	    <entry>1920x1080 progressive video at 30 fps as per SMPTE 296M.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_1080P50</entry>
-	    <entry>17</entry>
-	    <entry>1920x1080 progressive video at 50 fps as per BT.1120.</entry>
-	  </row>
-	  <row>
-	    <entry>V4L2_DV_1080P60</entry>
-	    <entry>18</entry>
-	    <entry>1920x1080 progressive video at 60 fps as per BT.1120.</entry>
-	  </row>
-	</tbody>
-      </tgroup>
-    </table>
-  </refsect1>
-
-  <refsect1>
-    &return-value;
-
-    <variablelist>
-      <varlistentry>
-	<term><errorcode>EINVAL</errorcode></term>
-	<listitem>
-	  <para>The &v4l2-dv-enum-preset; <structfield>index</structfield>
-is out of bounds.</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><errorcode>ENODATA</errorcode></term>
-	<listitem>
-	  <para>Digital video presets are not supported for this input or output.</para>
-	</listitem>
-      </varlistentry>
-    </variablelist>
-  </refsect1>
-</refentry>

Documentation/DocBook/media/v4l/vidioc-enuminput.xml

@@ -277,11 +277,6 @@ input/output interface to linux-media@vger.kernel.org on 19 Oct 2009.
       <tgroup cols="3">
 	&cs-def;
 	<tbody valign="top">
-	  <row>
-	    <entry><constant>V4L2_IN_CAP_PRESETS</constant></entry>
-	    <entry>0x00000001</entry>
-	    <entry>This input supports setting DV presets by using VIDIOC_S_DV_PRESET.</entry>
-	  </row>
 	  <row>
 	    <entry><constant>V4L2_IN_CAP_DV_TIMINGS</constant></entry>
 	    <entry>0x00000002</entry>

Documentation/DocBook/media/v4l/vidioc-enumoutput.xml

@@ -162,11 +162,6 @@ input/output interface to linux-media@vger.kernel.org on 19 Oct 2009.
       <tgroup cols="3">
 	&cs-def;
 	<tbody valign="top">
-	  <row>
-	    <entry><constant>V4L2_OUT_CAP_PRESETS</constant></entry>
-	    <entry>0x00000001</entry>
-	    <entry>This output supports setting DV presets by using VIDIOC_S_DV_PRESET.</entry>
-	  </row>
 	  <row>
 	    <entry><constant>V4L2_OUT_CAP_DV_TIMINGS</constant></entry>
 	    <entry>0x00000002</entry>

Documentation/DocBook/media/v4l/vidioc-g-dv-preset.xml

@@ -1,113 +0,0 @@
-<refentry id="vidioc-g-dv-preset">
-  <refmeta>
-    <refentrytitle>ioctl VIDIOC_G_DV_PRESET, VIDIOC_S_DV_PRESET</refentrytitle>
-    &manvol;
-  </refmeta>
-
-  <refnamediv>
-    <refname>VIDIOC_G_DV_PRESET</refname>
-    <refname>VIDIOC_S_DV_PRESET</refname>
-    <refpurpose>Query or select the DV preset of the current input or output</refpurpose>
-  </refnamediv>
-
-  <refsynopsisdiv>
-    <funcsynopsis>
-      <funcprototype>
-	<funcdef>int <function>ioctl</function></funcdef>
-	<paramdef>int <parameter>fd</parameter></paramdef>
-	<paramdef>int <parameter>request</parameter></paramdef>
-	<paramdef>struct v4l2_dv_preset *<parameter>argp</parameter></paramdef>
-      </funcprototype>
-    </funcsynopsis>
-  </refsynopsisdiv>
-
-  <refsect1>
-    <title>Arguments</title>
-
-    <variablelist>
-      <varlistentry>
-	<term><parameter>fd</parameter></term>
-	<listitem>
-	  <para>&fd;</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><parameter>request</parameter></term>
-	<listitem>
-	  <para>VIDIOC_G_DV_PRESET, VIDIOC_S_DV_PRESET</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><parameter>argp</parameter></term>
-	<listitem>
-	  <para></para>
-	</listitem>
-      </varlistentry>
-    </variablelist>
-  </refsect1>
-
-  <refsect1>
-    <title>Description</title>
-
-    <para>These ioctls are <emphasis role="bold">deprecated</emphasis>.
-    New drivers and applications should use &VIDIOC-G-DV-TIMINGS; and &VIDIOC-S-DV-TIMINGS;
-    instead.
-    </para>
-
-    <para>To query and select the current DV preset, applications
-use the <constant>VIDIOC_G_DV_PRESET</constant> and <constant>VIDIOC_S_DV_PRESET</constant>
-ioctls which take a pointer to a &v4l2-dv-preset; type as argument.
-Applications must zero the reserved array in &v4l2-dv-preset;.
-<constant>VIDIOC_G_DV_PRESET</constant> returns a dv preset in the field
-<structfield>preset</structfield> of &v4l2-dv-preset;.</para>
-
-    <para><constant>VIDIOC_S_DV_PRESET</constant> accepts a pointer to a &v4l2-dv-preset;
-that has the preset value to be set. Applications must zero the reserved array in &v4l2-dv-preset;.
-If the preset is not supported, it returns an &EINVAL; </para>
-  </refsect1>
-
-  <refsect1>
-    &return-value;
-
-    <variablelist>
-      <varlistentry>
-	<term><errorcode>EINVAL</errorcode></term>
-	<listitem>
-	  <para>This ioctl is not supported, or the
-<constant>VIDIOC_S_DV_PRESET</constant>,<constant>VIDIOC_S_DV_PRESET</constant> parameter was unsuitable.</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><errorcode>ENODATA</errorcode></term>
-	<listitem>
-	  <para>Digital video presets are not supported for this input or output.</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><errorcode>EBUSY</errorcode></term>
-	<listitem>
-	  <para>The device is busy and therefore can not change the preset.</para>
-	</listitem>
-      </varlistentry>
-    </variablelist>
-
-    <table pgwide="1" frame="none" id="v4l2-dv-preset">
-      <title>struct <structname>v4l2_dv_preset</structname></title>
-      <tgroup cols="3">
-	&cs-str;
-	<tbody valign="top">
-	  <row>
-	    <entry>__u32</entry>
-	    <entry><structfield>preset</structfield></entry>
-	    <entry>Preset value to represent the digital video timings</entry>
-	  </row>
-	  <row>
-	    <entry>__u32</entry>
-	    <entry><structfield>reserved[4]</structfield></entry>
-	    <entry>Reserved fields for future use</entry>
-	  </row>
-	</tbody>
-      </tgroup>
-    </table>
-  </refsect1>
-</refentry>

Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml

@@ -319,6 +319,15 @@ These controls are described in <xref
 	    processing controls. These controls are described in <xref
 	    linkend="image-process-controls" />.</entry>
 	  </row>
+
+	  <row>
+	    <entry><constant>V4L2_CTRL_CLASS_FM_RX</constant></entry>
+	    <entry>0xa10000</entry>
+	    <entry>The class containing FM Receiver (FM RX) controls.
+These controls are described in <xref
+		linkend="fm-rx-controls" />.</entry>
+	  </row>
+
 	</tbody>
       </tgroup>
     </table>

Documentation/DocBook/media/v4l/vidioc-query-dv-preset.xml

@@ -1,78 +0,0 @@
-<refentry id="vidioc-query-dv-preset">
-  <refmeta>
-    <refentrytitle>ioctl VIDIOC_QUERY_DV_PRESET</refentrytitle>
-    &manvol;
-  </refmeta>
-
-  <refnamediv>
-    <refname>VIDIOC_QUERY_DV_PRESET</refname>
-    <refpurpose>Sense the DV preset received by the current
-input</refpurpose>
-  </refnamediv>
-
-  <refsynopsisdiv>
-    <funcsynopsis>
-      <funcprototype>
-	<funcdef>int <function>ioctl</function></funcdef>
-	<paramdef>int <parameter>fd</parameter></paramdef>
-	<paramdef>int <parameter>request</parameter></paramdef>
-	<paramdef>struct v4l2_dv_preset *<parameter>argp</parameter></paramdef>
-      </funcprototype>
-    </funcsynopsis>
-  </refsynopsisdiv>
-
-  <refsect1>
-    <title>Arguments</title>
-
-    <variablelist>
-	<varlistentry>
-	<term><parameter>fd</parameter></term>
-	<listitem>
-	  <para>&fd;</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><parameter>request</parameter></term>
-	<listitem>
-	  <para>VIDIOC_QUERY_DV_PRESET</para>
-	</listitem>
-      </varlistentry>
-      <varlistentry>
-	<term><parameter>argp</parameter></term>
-	<listitem>
-	  <para></para>
-	</listitem>
-      </varlistentry>
-    </variablelist>
-  </refsect1>
-
-  <refsect1>
-    <title>Description</title>
-
-    <para>This ioctl is <emphasis role="bold">deprecated</emphasis>.
-    New drivers and applications should use &VIDIOC-QUERY-DV-TIMINGS; instead.
-    </para>
-
-    <para>The hardware may be able to detect the current DV preset
-automatically, similar to sensing the video standard. To do so, applications
-call <constant> VIDIOC_QUERY_DV_PRESET</constant> with a pointer to a
-&v4l2-dv-preset; type. Once the hardware detects a preset, that preset is
-returned in the preset field of &v4l2-dv-preset;. If the preset could not be
-detected because there was no signal, or the signal was unreliable, or the
-signal did not map to a supported preset, then the value V4L2_DV_INVALID is
-returned.</para>
-  </refsect1>
-
-  <refsect1>
-    &return-value;
-
-    <variablelist>
-      <varlistentry>
-	<term><errorcode>ENODATA</errorcode></term>
-	<listitem>
-	  <para>Digital video presets are not supported for this input or output.</para>
-	</listitem>
-      </varlistentry>
-    </variablelist>
-  </refsect1>
-</refentry>

Documentation/DocBook/media_api.tmpl

@@ -23,6 +23,7 @@
 <!-- LinuxTV v4l-dvb repository. -->
 <!ENTITY v4l-dvb		"<ulink url='http://linuxtv.org/repo/'>http://linuxtv.org/repo/</ulink>">
 <!ENTITY dash-ent-10            "<entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry>">
+<!ENTITY dash-ent-16            "<entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry>">
 ]>
 
 <book id="media_api">

Documentation/EDID/1600x1200.S

@@ -0,0 +1,44 @@
+/*
+   1600x1200.S: EDID data set for standard 1600x1200 60 Hz monitor
+
+   Copyright (C) 2013 Carsten Emde <C.Emde@osadl.org>
+
+   This program is free software; you can redistribute it and/or
+   modify it under the terms of the GNU General Public License
+   as published by the Free Software Foundation; either version 2
+   of the License, or (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA.
+*/
+
+/* EDID */
+#define VERSION 1
+#define REVISION 3
+
+/* Display */
+#define CLOCK 162000 /* kHz */
+#define XPIX 1600
+#define YPIX 1200
+#define XY_RATIO XY_RATIO_4_3
+#define XBLANK 560
+#define YBLANK 50
+#define XOFFSET 64
+#define XPULSE 192
+#define YOFFSET (63+1)
+#define YPULSE (63+3)
+#define DPI 72
+#define VFREQ 60 /* Hz */
+#define TIMING_NAME "Linux UXGA"
+#define ESTABLISHED_TIMINGS_BITS 0x00 /* none */
+#define HSYNC_POL 1
+#define VSYNC_POL 1
+#define CRC 0x9d
+
+#include "edid.S"

Documentation/EDID/HOWTO.txt

@@ -18,12 +18,12 @@ CONFIG_DRM_LOAD_EDID_FIRMWARE was introduced. It allows to provide an
 individually prepared or corrected EDID data set in the /lib/firmware
 directory from where it is loaded via the firmware interface. The code
 (see drivers/gpu/drm/drm_edid_load.c) contains built-in data sets for
-commonly used screen resolutions (1024x768, 1280x1024, 1680x1050,
-1920x1080) as binary blobs, but the kernel source tree does not contain
-code to create these data. In order to elucidate the origin of the
-built-in binary EDID blobs and to facilitate the creation of individual
-data for a specific misbehaving monitor, commented sources and a
-Makefile environment are given here.
+commonly used screen resolutions (1024x768, 1280x1024, 1600x1200,
+1680x1050, 1920x1080) as binary blobs, but the kernel source tree does
+not contain code to create these data. In order to elucidate the origin
+of the built-in binary EDID blobs and to facilitate the creation of
+individual data for a specific misbehaving monitor, commented sources
+and a Makefile environment are given here.
 
 To create binary EDID and C source code files from the existing data
 material, simply type "make".

Documentation/SubmittingPatches

@@ -420,7 +420,7 @@ person it names.  This tag documents that potentially interested parties
 have been included in the discussion
 
 
-14) Using Reported-by:, Tested-by: and Reviewed-by:
+14) Using Reported-by:, Tested-by:, Reviewed-by: and Suggested-by:
 
 If this patch fixes a problem reported by somebody else, consider adding a
 Reported-by: tag to credit the reporter for their contribution.  Please
@@ -468,6 +468,13 @@ done on the patch.  Reviewed-by: tags, when supplied by reviewers known to
 understand the subject area and to perform thorough reviews, will normally
 increase the likelihood of your patch getting into the kernel.
 
+A Suggested-by: tag indicates that the patch idea is suggested by the person
+named and ensures credit to the person for the idea. Please note that this
+tag should not be added without the reporter's permission, especially if the
+idea was not posted in a public forum. That said, if we diligently credit our
+idea reporters, they will, hopefully, be inspired to help us again in the
+future.
+
 
 15) The canonical patch format
 

Documentation/arm/sunxi/clocks.txt

@@ -0,0 +1,56 @@
+Frequently asked questions about the sunxi clock system
+=======================================================
+
+This document contains useful bits of information that people tend to ask
+about the sunxi clock system, as well as accompanying ASCII art when adequate.
+
+Q: Why is the main 24MHz oscillator gatable? Wouldn't that break the
+   system?
+
+A: The 24MHz oscillator allows gating to save power. Indeed, if gated
+   carelessly the system would stop functioning, but with the right
+   steps, one can gate it and keep the system running. Consider this
+   simplified suspend example:
+
+   While the system is operational, you would see something like
+
+      24MHz         32kHz
+       |
+      PLL1
+       \
+        \_ CPU Mux
+             |
+           [CPU]
+
+   When you are about to suspend, you switch the CPU Mux to the 32kHz
+   oscillator:
+
+      24Mhz         32kHz
+       |              |
+      PLL1            |
+                     /
+           CPU Mux _/
+             |
+           [CPU]
+
+    Finally you can gate the main oscillator
+
+                    32kHz
+                      |
+                      |
+                     /
+           CPU Mux _/
+             |
+           [CPU]
+
+Q: Were can I learn more about the sunxi clocks?
+
+A: The linux-sunxi wiki contains a page documenting the clock registers,
+   you can find it at
+
+        http://linux-sunxi.org/A10/CCM
+
+   The authoritative source for information at this time is the ccmu driver
+   released by Allwinner, you can find it at
+
+        https://github.com/linux-sunxi/linux-sunxi/tree/sunxi-3.0/arch/arm/mach-sun4i/clock/ccmu

Documentation/backlight/lp855x-driver.txt

@@ -32,14 +32,10 @@ Platform data for lp855x
 For supporting platform specific data, the lp855x platform data can be used.
 
 * name : Backlight driver name. If it is not defined, default name is set.
-* mode : Brightness control mode. PWM or register based.
 * device_control : Value of DEVICE CONTROL register.
 * initial_brightness : Initial value of backlight brightness.
 * period_ns : Platform specific PWM period value. unit is nano.
 	     Only valid when brightness is pwm input mode.
-* load_new_rom_data :
-	0 : use default configuration data
-	1 : update values of eeprom or eprom registers on loading driver
 * size_program : Total size of lp855x_rom_data.
 * rom_data : List of new eeprom/eprom registers.
 
@@ -54,10 +50,8 @@ static struct lp855x_rom_data lp8552_eeprom_arr[] = {
 
 static struct lp855x_platform_data lp8552_pdata = {
 	.name = "lcd-bl",
-	.mode = REGISTER_BASED,
 	.device_control = I2C_CONFIG(LP8552),
 	.initial_brightness = INITIAL_BRT,
-	.load_new_rom_data = 1,
 	.size_program = ARRAY_SIZE(lp8552_eeprom_arr),
 	.rom_data = lp8552_eeprom_arr,
 };
@@ -65,7 +59,6 @@ static struct lp855x_platform_data lp8552_pdata = {
 example 2) lp8556 platform data : pwm input mode with default rom data
 
 static struct lp855x_platform_data lp8556_pdata = {
-	.mode = PWM_BASED,
 	.device_control = PWM_CONFIG(LP8556),
 	.initial_brightness = INITIAL_BRT,
 	.period_ns = 1000000,

Documentation/cgroups/00-INDEX

@@ -18,6 +18,8 @@ memcg_test.txt
 	- Memory Resource Controller; implementation details.
 memory.txt
 	- Memory Resource Controller; design, accounting, interface, testing.
+net_cls.txt
+	- Network classifier cgroups details and usages.
 net_prio.txt
 	- Network priority cgroups details and usages.
 resource_counter.txt

Documentation/cgroups/cgroups.txt

@@ -442,7 +442,7 @@ You can attach the current shell task by echoing 0:
 You can use the cgroup.procs file instead of the tasks file to move all
 threads in a threadgroup at once. Echoing the PID of any task in a
 threadgroup to cgroup.procs causes all tasks in that threadgroup to be
-be attached to the cgroup. Writing 0 to cgroup.procs moves all tasks
+attached to the cgroup. Writing 0 to cgroup.procs moves all tasks
 in the writing task's threadgroup.
 
 Note: Since every task is always a member of exactly one cgroup in each
@@ -580,6 +580,7 @@ propagation along the hierarchy. See the comment on
 cgroup_for_each_descendant_pre() for details.
 
 void css_offline(struct cgroup *cgrp);
+(cgroup_mutex held by caller)
 
 This is the counterpart of css_online() and called iff css_online()
 has succeeded on @cgrp. This signifies the beginning of the end of

Documentation/cgroups/devices.txt

@@ -13,9 +13,7 @@ either an integer or * for all.  Access is a composition of r
 The root device cgroup starts with rwm to 'all'.  A child device
 cgroup gets a copy of the parent.  Administrators can then remove
 devices from the whitelist or add new entries.  A child cgroup can
-never receive a device access which is denied by its parent.  However
-when a device access is removed from a parent it will not also be
-removed from the child(ren).
+never receive a device access which is denied by its parent.
 
 2. User Interface
 
@@ -50,3 +48,69 @@ task to a new cgroup.  (Again we'll probably want to change that).
 
 A cgroup may not be granted more permissions than the cgroup's
 parent has.
+
+4. Hierarchy
+
+device cgroups maintain hierarchy by making sure a cgroup never has more
+access permissions than its parent.  Every time an entry is written to
+a cgroup's devices.deny file, all its children will have that entry removed
+from their whitelist and all the locally set whitelist entries will be
+re-evaluated.  In case one of the locally set whitelist entries would provide
+more access than the cgroup's parent, it'll be removed from the whitelist.
+
+Example:
+      A
+     / \
+        B
+
+    group        behavior	exceptions
+    A            allow		"b 8:* rwm", "c 116:1 rw"
+    B            deny		"c 1:3 rwm", "c 116:2 rwm", "b 3:* rwm"
+
+If a device is denied in group A:
+	# echo "c 116:* r" > A/devices.deny
+it'll propagate down and after revalidating B's entries, the whitelist entry
+"c 116:2 rwm" will be removed:
+
+    group        whitelist entries                        denied devices
+    A            all                                      "b 8:* rwm", "c 116:* rw"
+    B            "c 1:3 rwm", "b 3:* rwm"                 all the rest
+
+In case parent's exceptions change and local exceptions are not allowed
+anymore, they'll be deleted.
+
+Notice that new whitelist entries will not be propagated:
+      A
+     / \
+        B
+
+    group        whitelist entries                        denied devices
+    A            "c 1:3 rwm", "c 1:5 r"                   all the rest
+    B            "c 1:3 rwm", "c 1:5 r"                   all the rest
+
+when adding "c *:3 rwm":
+	# echo "c *:3 rwm" >A/devices.allow
+
+the result:
+    group        whitelist entries                        denied devices
+    A            "c *:3 rwm", "c 1:5 r"                   all the rest
+    B            "c 1:3 rwm", "c 1:5 r"                   all the rest
+
+but now it'll be possible to add new entries to B:
+	# echo "c 2:3 rwm" >B/devices.allow
+	# echo "c 50:3 r" >B/devices.allow
+or even
+	# echo "c *:3 rwm" >B/devices.allow
+
+Allowing or denying all by writing 'a' to devices.allow or devices.deny will
+not be possible once the device cgroups has children.
+
+4.1 Hierarchy (internal implementation)
+
+device cgroups is implemented internally using a behavior (ALLOW, DENY) and a
+list of exceptions.  The internal state is controlled using the same user
+interface to preserve compatibility with the previous whitelist-only
+implementation.  Removal or addition of exceptions that will reduce the access
+to devices will be propagated down the hierarchy.
+For every propagated exception, the effective rules will be re-evaluated based
+on current parent's access rules.

Documentation/cgroups/memory.txt

@@ -40,6 +40,7 @@ Features:
  - soft limit
  - moving (recharging) account at moving a task is selectable.
  - usage threshold notifier
+ - memory pressure notifier
  - oom-killer disable knob and oom-notifier
  - Root cgroup has no limit controls.
 
@@ -65,6 +66,7 @@ Brief summary of control files.
  memory.stat			 # show various statistics
  memory.use_hierarchy		 # set/show hierarchical account enabled
  memory.force_empty		 # trigger forced move charge to parent
+ memory.pressure_level		 # set memory pressure notifications
  memory.swappiness		 # set/show swappiness parameter of vmscan
 				 (See sysctl's vm.swappiness)
  memory.move_charge_at_immigrate # set/show controls of moving charges
@@ -194,7 +196,7 @@ the cgroup that brought it in -- this will happen on memory pressure).
 But see section 8.2: when moving a task to another cgroup, its pages may
 be recharged to the new cgroup, if move_charge_at_immigrate has been chosen.
 
-Exception: If CONFIG_CGROUP_CGROUP_MEMCG_SWAP is not used.
+Exception: If CONFIG_MEMCG_SWAP is not used.
 When you do swapoff and make swapped-out pages of shmem(tmpfs) to
 be backed into memory in force, charges for pages are accounted against the
 caller of swapoff rather than the users of shmem.
@@ -762,7 +764,73 @@ At reading, current status of OOM is shown.
 	under_oom	 0 or 1 (if 1, the memory cgroup is under OOM, tasks may
 				 be stopped.)
 
-11. TODO
+11. Memory Pressure
+
+The pressure level notifications can be used to monitor the memory
+allocation cost; based on the pressure, applications can implement
+different strategies of managing their memory resources. The pressure
+levels are defined as following:
+
+The "low" level means that the system is reclaiming memory for new
+allocations. Monitoring this reclaiming activity might be useful for
+maintaining cache level. Upon notification, the program (typically
+"Activity Manager") might analyze vmstat and act in advance (i.e.
+prematurely shutdown unimportant services).
+
+The "medium" level means that the system is experiencing medium memory
+pressure, the system might be making swap, paging out active file caches,
+etc. Upon this event applications may decide to further analyze
+vmstat/zoneinfo/memcg or internal memory usage statistics and free any
+resources that can be easily reconstructed or re-read from a disk.
+
+The "critical" level means that the system is actively thrashing, it is
+about to out of memory (OOM) or even the in-kernel OOM killer is on its
+way to trigger. Applications should do whatever they can to help the
+system. It might be too late to consult with vmstat or any other
+statistics, so it's advisable to take an immediate action.
+
+The events are propagated upward until the event is handled, i.e. the
+events are not pass-through. Here is what this means: for example you have
+three cgroups: A->B->C. Now you set up an event listener on cgroups A, B
+and C, and suppose group C experiences some pressure. In this situation,
+only group C will receive the notification, i.e. groups A and B will not
+receive it. This is done to avoid excessive "broadcasting" of messages,
+which disturbs the system and which is especially bad if we are low on
+memory or thrashing. So, organize the cgroups wisely, or propagate the
+events manually (or, ask us to implement the pass-through events,
+explaining why would you need them.)
+
+The file memory.pressure_level is only used to setup an eventfd. To
+register a notification, an application must:
+
+- create an eventfd using eventfd(2);
+- open memory.pressure_level;
+- write string like "<event_fd> <fd of memory.pressure_level> <level>"
+  to cgroup.event_control.
+
+Application will be notified through eventfd when memory pressure is at
+the specific level (or higher). Read/write operations to
+memory.pressure_level are no implemented.
+
+Test:
+
+   Here is a small script example that makes a new cgroup, sets up a
+   memory limit, sets up a notification in the cgroup and then makes child
+   cgroup experience a critical pressure:
+
+   # cd /sys/fs/cgroup/memory/
+   # mkdir foo
+   # cd foo
+   # cgroup_event_listener memory.pressure_level low &
+   # echo 8000000 > memory.limit_in_bytes
+   # echo 8000000 > memory.memsw.limit_in_bytes
+   # echo $$ > tasks
+   # dd if=/dev/zero | read x
+
+   (Expect a bunch of notifications, and eventually, the oom-killer will
+   trigger.)
+
+12. TODO
 
 1. Add support for accounting huge pages (as a separate controller)
 2. Make per-cgroup scanner reclaim not-shared pages first

Documentation/cgroups/net_cls.txt

@@ -0,0 +1,34 @@
+Network classifier cgroup
+-------------------------
+
+The Network classifier cgroup provides an interface to
+tag network packets with a class identifier (classid).
+
+The Traffic Controller (tc) can be used to assign
+different priorities to packets from different cgroups.
+
+Creating a net_cls cgroups instance creates a net_cls.classid file.
+This net_cls.classid value is initialized to 0.
+
+You can write hexadecimal values to net_cls.classid; the format for these
+values is 0xAAAABBBB; AAAA is the major handle number and BBBB
+is the minor handle number.
+Reading net_cls.classid yields a decimal result.
+
+Example:
+mkdir /sys/fs/cgroup/net_cls
+mount -t cgroup -onet_cls net_cls /sys/fs/cgroup/net_cls
+mkdir /sys/fs/cgroup/net_cls/0
+echo 0x100001 >  /sys/fs/cgroup/net_cls/0/net_cls.classid
+	- setting a 10:1 handle.
+
+cat /sys/fs/cgroup/net_cls/0/net_cls.classid
+1048577
+
+configuring tc:
+tc qdisc add dev eth0 root handle 10: htb
+
+tc class add dev eth0 parent 10: classid 10:1 htb rate 40mbit
+ - creating traffic class 10:1
+
+tc filter add dev eth0 parent 10: protocol ip prio 10 handle 1: cgroup

Documentation/clk.txt

@@ -174,9 +174,9 @@ int clk_foo_enable(struct clk_hw *hw)
 };
 
 Below is a matrix detailing which clk_ops are mandatory based upon the
-hardware capbilities of that clock.  A cell marked as "y" means
+hardware capabilities of that clock.  A cell marked as "y" means
 mandatory, a cell marked as "n" implies that either including that
-callback is invalid or otherwise uneccesary.  Empty cells are either
+callback is invalid or otherwise unnecessary.  Empty cells are either
 optional or must be evaluated on a case-by-case basis.
 
                            clock hardware characteristics
@@ -231,3 +231,14 @@ To better enforce this policy, always follow this simple rule: any
 statically initialized clock data MUST be defined in a separate file
 from the logic that implements its ops.  Basically separate the logic
 from the data and all is well.
+
+	Part 6 - Disabling clock gating of unused clocks
+
+Sometimes during development it can be useful to be able to bypass the
+default disabling of unused clocks. For example, if drivers aren't enabling
+clocks properly but rely on them being on from the bootloader, bypassing
+the disabling means that the driver will remain functional while the issues
+are sorted out.
+
+To bypass this disabling, include "clk_ignore_unused" in the bootargs to the
+kernel.

Documentation/cpu-freq/cpu-drivers.txt

@@ -108,8 +108,9 @@ policy->governor		must contain the "default policy" for
 				cpufreq_driver.target is called with
 				these values.
 
-For setting some of these values, the frequency table helpers might be
-helpful. See the section 2 for more information on them.
+For setting some of these values (cpuinfo.min[max]_freq, policy->min[max]), the
+frequency table helpers might be helpful. See the section 2 for more information
+on them.
 
 SMP systems normally have same clock source for a group of cpus. For these the
 .init() would be called only once for the first online cpu. Here the .init()
@@ -184,10 +185,10 @@ the reference implementation in drivers/cpufreq/longrun.c
 As most cpufreq processors only allow for being set to a few specific
 frequencies, a "frequency table" with some functions might assist in
 some work of the processor driver. Such a "frequency table" consists
-of an array of struct cpufreq_freq_table entries, with any value in
+of an array of struct cpufreq_frequency_table entries, with any value in
 "index" you want to use, and the corresponding frequency in
 "frequency". At the end of the table, you need to add a
-cpufreq_freq_table entry with frequency set to CPUFREQ_TABLE_END. And
+cpufreq_frequency_table entry with frequency set to CPUFREQ_TABLE_END. And
 if you want to skip one entry in the table, set the frequency to 
 CPUFREQ_ENTRY_INVALID. The entries don't need to be in ascending
 order.

Documentation/cpu-freq/governors.txt

@@ -167,6 +167,27 @@ of load evaluation and helping the CPU stay at its top speed when truly
 busy, rather than shifting back and forth in speed. This tunable has no
 effect on behavior at lower speeds/lower CPU loads.
 
+powersave_bias: this parameter takes a value between 0 to 1000. It
+defines the percentage (times 10) value of the target frequency that
+will be shaved off of the target. For example, when set to 100 -- 10%,
+when ondemand governor would have targeted 1000 MHz, it will target
+1000 MHz - (10% of 1000 MHz) = 900 MHz instead. This is set to 0
+(disabled) by default.
+When AMD frequency sensitivity powersave bias driver --
+drivers/cpufreq/amd_freq_sensitivity.c is loaded, this parameter
+defines the workload frequency sensitivity threshold in which a lower
+frequency is chosen instead of ondemand governor's original target.
+The frequency sensitivity is a hardware reported (on AMD Family 16h
+Processors and above) value between 0 to 100% that tells software how
+the performance of the workload running on a CPU will change when
+frequency changes. A workload with sensitivity of 0% (memory/IO-bound)
+will not perform any better on higher core frequency, whereas a
+workload with sensitivity of 100% (CPU-bound) will perform better
+higher the frequency. When the driver is loaded, this is set to 400
+by default -- for CPUs running workloads with sensitivity value below
+40%, a lower frequency is chosen. Unloading the driver or writing 0
+will disable this feature.
+
 
 2.5 Conservative
 ----------------
@@ -191,6 +212,12 @@ governor but for the opposite direction.  For example when set to its
 default value of '20' it means that if the CPU usage needs to be below
 20% between samples to have the frequency decreased.
 
+sampling_down_factor: similar functionality as in "ondemand" governor.
+But in "conservative", it controls the rate at which the kernel makes
+a decision on when to decrease the frequency while running in any
+speed. Load for frequency increase is still evaluated every
+sampling rate.
+
 3. The Governor Interface in the CPUfreq Core
 =============================================
 

Documentation/cpuidle/driver.txt

@@ -15,11 +15,17 @@ has mechanisms in place to support actual entry-exit into CPU idle states.
 cpuidle driver initializes the cpuidle_device structure for each CPU device
 and registers with cpuidle using cpuidle_register_device.
 
+If all the idle states are the same, the wrapper function cpuidle_register
+could be used instead.
+
 It can also support the dynamic changes (like battery <-> AC), by using
 cpuidle_pause_and_lock, cpuidle_disable_device and cpuidle_enable_device,
 cpuidle_resume_and_unlock.
 
 Interfaces:
+extern int cpuidle_register(struct cpuidle_driver *drv,
+                            const struct cpumask *const coupled_cpus);
+extern int cpuidle_unregister(struct cpuidle_driver *drv);
 extern int cpuidle_register_driver(struct cpuidle_driver *drv);
 extern void cpuidle_unregister_driver(struct cpuidle_driver *drv);
 extern int cpuidle_register_device(struct cpuidle_device *dev);

Documentation/device-mapper/dm-raid.txt

@@ -1,10 +1,13 @@
 dm-raid
--------
+=======
 
 The device-mapper RAID (dm-raid) target provides a bridge from DM to MD.
 It allows the MD RAID drivers to be accessed using a device-mapper
 interface.
 
+
+Mapping Table Interface
+-----------------------
 The target is named "raid" and it accepts the following parameters:
 
   <raid_type> <#raid_params> <raid_params> \
@@ -47,7 +50,7 @@ The target is named "raid" and it accepts the following parameters:
     followed by optional parameters (in any order):
 	[sync|nosync]   Force or prevent RAID initialization.
 
-	[rebuild <idx>]	Rebuild drive number idx (first drive is 0).
+	[rebuild <idx>]	Rebuild drive number 'idx' (first drive is 0).
 
 	[daemon_sleep <ms>]
 		Interval between runs of the bitmap daemon that
@@ -56,9 +59,9 @@ The target is named "raid" and it accepts the following parameters:
 
 	[min_recovery_rate <kB/sec/disk>]  Throttle RAID initialization
 	[max_recovery_rate <kB/sec/disk>]  Throttle RAID initialization
-	[write_mostly <idx>]		   Drive index is write-mostly
-	[max_write_behind <sectors>]       See '-write-behind=' (man mdadm)
-	[stripe_cache <sectors>]           Stripe cache size (higher RAIDs only)
+	[write_mostly <idx>]		   Mark drive index 'idx' write-mostly.
+	[max_write_behind <sectors>]       See '--write-behind=' (man mdadm)
+	[stripe_cache <sectors>]           Stripe cache size (RAID 4/5/6 only)
 	[region_size <sectors>]
 		The region_size multiplied by the number of regions is the
 		logical size of the array.  The bitmap records the device
@@ -122,7 +125,7 @@ The target is named "raid" and it accepts the following parameters:
 	given for both the metadata and data drives for a given position.
 
 
-Example tables
+Example Tables
 --------------
 # RAID4 - 4 data drives, 1 parity (no metadata devices)
 # No metadata devices specified to hold superblock/bitmap info
@@ -141,26 +144,70 @@ Example tables
         raid4 4 2048 sync min_recovery_rate 20 \
         5 8:17 8:18 8:33 8:34 8:49 8:50 8:65 8:66 8:81 8:82
 
+
+Status Output
+-------------
 'dmsetup table' displays the table used to construct the mapping.
 The optional parameters are always printed in the order listed
 above with "sync" or "nosync" always output ahead of the other
 arguments, regardless of the order used when originally loading the table.
 Arguments that can be repeated are ordered by value.
 
-'dmsetup status' yields information on the state and health of the
-array.
-The output is as follows:
+
+'dmsetup status' yields information on the state and health of the array.
+The output is as follows (normally a single line, but expanded here for
+clarity):
 1: <s> <l> raid \
-2:      <raid_type> <#devices> <1 health char for each dev> <resync_ratio>
+2:      <raid_type> <#devices> <health_chars> \
+3:      <sync_ratio> <sync_action> <mismatch_cnt>
 
 Line 1 is the standard output produced by device-mapper.
-Line 2 is produced by the raid target, and best explained by example:
-        0 1960893648 raid raid4 5 AAAAA 2/490221568
+Line 2 & 3 are produced by the raid target and are best explained by example:
+        0 1960893648 raid raid4 5 AAAAA 2/490221568 init 0
 Here we can see the RAID type is raid4, there are 5 devices - all of
-which are 'A'live, and the array is 2/490221568 complete with recovery.
-Faulty or missing devices are marked 'D'.  Devices that are out-of-sync
-are marked 'a'.
-
+which are 'A'live, and the array is 2/490221568 complete with its initial
+recovery.  Here is a fuller description of the individual fields:
+	<raid_type>     Same as the <raid_type> used to create the array.
+	<health_chars>  One char for each device, indicating: 'A' = alive and
+			in-sync, 'a' = alive but not in-sync, 'D' = dead/failed.
+	<sync_ratio>    The ratio indicating how much of the array has undergone
+			the process described by 'sync_action'.  If the
+			'sync_action' is "check" or "repair", then the process
+			of "resync" or "recover" can be considered complete.
+	<sync_action>   One of the following possible states:
+			idle    - No synchronization action is being performed.
+			frozen  - The current action has been halted.
+			resync  - Array is undergoing its initial synchronization
+				  or is resynchronizing after an unclean shutdown
+				  (possibly aided by a bitmap).
+			recover - A device in the array is being rebuilt or
+				  replaced.
+			check   - A user-initiated full check of the array is
+				  being performed.  All blocks are read and
+				  checked for consistency.  The number of
+				  discrepancies found are recorded in
+				  <mismatch_cnt>.  No changes are made to the
+				  array by this action.
+			repair  - The same as "check", but discrepancies are
+				  corrected.
+			reshape - The array is undergoing a reshape.
+	<mismatch_cnt>  The number of discrepancies found between mirror copies
+			in RAID1/10 or wrong parity values found in RAID4/5/6.
+			This value is valid only after a "check" of the array
+			is performed.  A healthy array has a 'mismatch_cnt' of 0.
+
+Message Interface
+-----------------
+The dm-raid target will accept certain actions through the 'message' interface.
+('man dmsetup' for more information on the message interface.)  These actions
+include:
+	"idle"   - Halt the current sync action.
+	"frozen" - Freeze the current sync action.
+	"resync" - Initiate/continue a resync.
+	"recover"- Initiate/continue a recover process.
+	"check"  - Initiate a check (i.e. a "scrub") of the array.
+	"repair" - Initiate a repair of the array.
+	"reshape"- Currently unsupported (-EINVAL).
 
 Version History
 ---------------
@@ -171,4 +218,7 @@ Version History
 1.3.1	Allow device replacement/rebuild for RAID 10
 1.3.2   Fix/improve redundancy checking for RAID10
 1.4.0	Non-functional change.  Removes arg from mapping function.
-1.4.1   Add RAID10 "far" and "offset" algorithm support.
+1.4.1   RAID10 fix redundancy validation checks (commit 55ebbb5).
+1.4.2   Add RAID10 "far" and "offset" algorithm support.
+1.5.0   Add message interface to allow manipulation of the sync_action.
+	New status (STATUSTYPE_INFO) fields: sync_action and mismatch_cnt.

Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.txt

@@ -0,0 +1,11 @@
+Altera SOCFPGA Clock Manager
+
+Required properties:
+- compatible : "altr,clk-mgr"
+- reg : Should contain base address and length for Clock Manager
+
+Example:
+	 clkmgr@ffd04000 {
+		compatible = "altr,clk-mgr";
+		reg = <0xffd04000 0x1000>;
+	};

Documentation/devicetree/bindings/arm/atmel-adc.txt

@@ -14,9 +14,19 @@ Required properties:
   - atmel,adc-status-register: Offset of the Interrupt Status Register
   - atmel,adc-trigger-register: Offset of the Trigger Register
   - atmel,adc-vref: Reference voltage in millivolts for the conversions
+  - atmel,adc-res: List of resolution in bits supported by the ADC. List size
+		   must be two at least.
+  - atmel,adc-res-names: Contains one identifier string for each resolution
+			 in atmel,adc-res property. "lowres" and "highres"
+			 identifiers are required.
 
 Optional properties:
   - atmel,adc-use-external: Boolean to enable of external triggers
+  - atmel,adc-use-res: String corresponding to an identifier from
+		       atmel,adc-res-names property. If not specified, the highest
+		       resolution will be used.
+  - atmel,adc-sleep-mode: Boolean to enable sleep mode when no conversion
+  - atmel,adc-sample-hold-time: Sample and Hold Time in microseconds
  
 Optional trigger Nodes:
   - Required properties:
@@ -40,6 +50,9 @@ adc0: adc@fffb0000 {
 	atmel,adc-trigger-register = <0x08>;
 	atmel,adc-use-external;
 	atmel,adc-vref = <3300>;
+	atmel,adc-res = <8 10>;
+	atmel,adc-res-names = "lowres", "highres";
+	atmel,adc-use-res = "lowres";
 
 	trigger@0 {
 		trigger-name = "external-rising";

Documentation/devicetree/bindings/arm/bcm/bcm,kona-timer.txt

@@ -0,0 +1,19 @@
+Broadcom Kona Family timer
+-----------------------------------------------------
+This timer is used in the following Broadcom SoCs:
+ BCM11130, BCM11140, BCM11351, BCM28145, BCM28155
+
+Required properties:
+- compatible : "bcm,kona-timer"
+- reg : Register range for the timer
+- interrupts : interrupt for the timer
+- clock-frequency: frequency that the clock operates
+
+Example:
+	timer@35006000 {
+		compatible = "bcm,kona-timer";
+		reg = <0x35006000 0x1000>;
+		interrupts = <0x0 7 0x4>;
+		clock-frequency = <32768>;
+	};
+

Documentation/devicetree/bindings/arm/msm/ssbi.txt

@@ -0,0 +1,18 @@
+* Qualcomm SSBI
+
+Some Qualcomm MSM devices contain a point-to-point serial bus used to
+communicate with a limited range of devices (mostly power management
+chips).
+
+These require the following properties:
+
+- compatible: "qcom,ssbi"
+
+- qcom,controller-type
+  indicates the SSBI bus variant the controller should use to talk
+  with the slave device.  This should be one of "ssbi", "ssbi2", or
+  "pmic-arbiter".  The type chosen is determined by the attached
+  slave.
+
+The slave device should be the single child node of the ssbi device
+with a compatible field.

Documentation/devicetree/bindings/arm/msm/timer.txt

@@ -3,36 +3,35 @@
 Properties:
 
 - compatible : Should at least contain "qcom,msm-timer". More specific
-  properties such as "qcom,msm-gpt" and "qcom,msm-dgt" specify a general
-  purpose timer and a debug timer respectively.
+               properties specify which subsystem the timers are paired with.
 
-- interrupts : Interrupt indicating a match event.
+               "qcom,kpss-timer" - krait subsystem
+               "qcom,scss-timer" - scorpion subsystem
 
-- reg : Specifies the base address of the timer registers. The second region
-  specifies an optional register used to configure the clock divider.
+- interrupts : Interrupts for the the debug timer, the first general purpose
+               timer, and optionally a second general purpose timer in that
+               order.
 
-- clock-frequency : The frequency of the timer in Hz.
+- reg : Specifies the base address of the timer registers.
+
+- clock-frequency : The frequency of the debug timer and the general purpose
+                    timer(s) in Hz in that order.
 
 Optional:
 
 - cpu-offset : per-cpu offset used when the timer is accessed without the
-  CPU remapping facilities. The offset is cpu-offset * cpu-nr.
+               CPU remapping facilities. The offset is
+               cpu-offset + (0x10000 * cpu-nr).
 
 Example:
 
-       timer@200a004 {
-               compatible = "qcom,msm-gpt", "qcom,msm-timer";
-               interrupts = <1 2 0x301>;
-               reg = <0x0200a004 0x10>;
-               clock-frequency = <32768>;
-               cpu-offset = <0x40000>;
-       };
-
-       timer@200a024 {
-               compatible = "qcom,msm-dgt", "qcom,msm-timer";
-               interrupts = <1 3 0x301>;
-               reg = <0x0200a024 0x10>,
-                     <0x0200a034 0x4>;
-               clock-frequency = <6750000>;
+       timer@200a000 {
+               compatible = "qcom,scss-timer", "qcom,msm-timer";
+               interrupts = <1 1 0x301>,
+                            <1 2 0x301>,
+                            <1 3 0x301>;
+               reg = <0x0200a000 0x100>;
+               clock-frequency = <19200000>,
+                                 <32768>;
                cpu-offset = <0x40000>;
        };

Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt

@@ -0,0 +1,60 @@
+Samsung Exynos Analog to Digital Converter bindings
+
+The devicetree bindings are for the new ADC driver written for
+Exynos4 and upward SoCs from Samsung.
+
+New driver handles the following
+1. Supports ADC IF found on EXYNOS4412/EXYNOS5250
+   and future SoCs from Samsung
+2. Add ADC driver under iio/adc framework
+3. Also adds the Documentation for device tree bindings
+
+Required properties:
+- compatible:		Must be "samsung,exynos-adc-v1"
+				for exynos4412/5250 controllers.
+			Must be "samsung,exynos-adc-v2" for
+				future controllers.
+- reg:			Contains ADC register address range (base address and
+			length) and the address of the phy enable register.
+- interrupts: 		Contains the interrupt information for the timer. The
+			format is being dependent on which interrupt controller
+			the Samsung device uses.
+- #io-channel-cells = <1>; As ADC has multiple outputs
+- clocks		From common clock binding: handle to adc clock.
+- clock-names		From common clock binding: Shall be "adc".
+- vdd-supply		VDD input supply.
+
+Note: child nodes can be added for auto probing from device tree.
+
+Example: adding device info in dtsi file
+
+adc: adc@12D10000 {
+	compatible = "samsung,exynos-adc-v1";
+	reg = <0x12D10000 0x100>, <0x10040718 0x4>;
+	interrupts = <0 106 0>;
+	#io-channel-cells = <1>;
+	io-channel-ranges;
+
+	clocks = <&clock 303>;
+	clock-names = "adc";
+
+	vdd-supply = <&buck5_reg>;
+};
+
+
+Example: Adding child nodes in dts file
+
+adc@12D10000 {
+
+	/* NTC thermistor is a hwmon device */
+	ncp15wb473@0 {
+		compatible = "ntc,ncp15wb473";
+		pullup-uV = <1800000>;
+		pullup-ohm = <47000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc 4>;
+	};
+};
+
+Note: Does not apply to ADC driver under arch/arm/plat-samsung/
+Note: The child node can be added under the adc node or separately.

Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt

@@ -1,19 +1,84 @@
 NVIDIA Tegra Power Management Controller (PMC)
 
-Properties:
+The PMC block interacts with an external Power Management Unit. The PMC
+mostly controls the entry and exit of the system from different sleep
+modes. It provides power-gating controllers for SoC and CPU power-islands.
+
+Required properties:
 - name : Should be pmc
 - compatible : Should contain "nvidia,tegra<chip>-pmc".
 - reg : Offset and length of the register set for the device
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names : Must include the following entries:
+  "pclk" (The Tegra clock of that name),
+  "clk32k_in" (The 32KHz clock input to Tegra).
+
+Optional properties:
 - nvidia,invert-interrupt : If present, inverts the PMU interrupt signal.
   The PMU is an external Power Management Unit, whose interrupt output
   signal is fed into the PMC. This signal is optionally inverted, and then
   fed into the ARM GIC. The PMC is not involved in the detection or
   handling of this interrupt signal, merely its inversion.
+- nvidia,suspend-mode : The suspend mode that the platform should use.
+  Valid values are 0, 1 and 2:
+  0 (LP0): CPU + Core voltage off and DRAM in self-refresh
+  1 (LP1): CPU voltage off and DRAM in self-refresh
+  2 (LP2): CPU voltage off
+- nvidia,core-power-req-active-high : Boolean, core power request active-high
+- nvidia,sys-clock-req-active-high : Boolean, system clock request active-high
+- nvidia,combined-power-req : Boolean, combined power request for CPU & Core
+- nvidia,cpu-pwr-good-en : Boolean, CPU power good signal (from PMIC to PMC)
+			   is enabled.
+
+Required properties when nvidia,suspend-mode is specified:
+- nvidia,cpu-pwr-good-time : CPU power good time in uS.
+- nvidia,cpu-pwr-off-time : CPU power off time in uS.
+- nvidia,core-pwr-good-time : <Oscillator-stable-time Power-stable-time>
+			      Core power good time in uS.
+- nvidia,core-pwr-off-time : Core power off time in uS.
+
+Required properties when nvidia,suspend-mode=<0>:
+- nvidia,lp0-vec : <start length> Starting address and length of LP0 vector
+  The LP0 vector contains the warm boot code that is executed by AVP when
+  resuming from the LP0 state. The AVP (Audio-Video Processor) is an ARM7
+  processor and always being the first boot processor when chip is power on
+  or resume from deep sleep mode. When the system is resumed from the deep
+  sleep mode, the warm boot code will restore some PLLs, clocks and then
+  bring up CPU0 for resuming the system.
 
 Example:
 
+/ SoC dts including file
 pmc@7000f400 {
 	compatible = "nvidia,tegra20-pmc";
 	reg = <0x7000e400 0x400>;
+	clocks = <&tegra_car 110>, <&clk32k_in>;
+	clock-names = "pclk", "clk32k_in";
 	nvidia,invert-interrupt;
+	nvidia,suspend-mode = <1>;
+	nvidia,cpu-pwr-good-time = <2000>;
+	nvidia,cpu-pwr-off-time = <100>;
+	nvidia,core-pwr-good-time = <3845 3845>;
+	nvidia,core-pwr-off-time = <458>;
+	nvidia,core-power-req-active-high;
+	nvidia,sys-clock-req-active-high;
+	nvidia,lp0-vec = <0xbdffd000 0x2000>;
+};
+
+/ Tegra board dts file
+{
+	...
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+	...
 };

Documentation/devicetree/bindings/ata/imx-pata.txt

@@ -0,0 +1,17 @@
+* Freescale i.MX PATA Controller
+
+Required properties:
+- compatible: "fsl,imx27-pata"
+- reg: Address range of the PATA Controller
+- interrupts: The interrupt of the PATA Controller
+- clocks: the clocks for the PATA Controller
+
+Example:
+
+	pata: pata@83fe0000 {
+		compatible = "fsl,imx51-pata", "fsl,imx27-pata";
+		reg = <0x83fe0000 0x4000>;
+		interrupts = <70>;
+		clocks = <&clks 161>;
+		status = "disabled";
+	};

Documentation/devicetree/bindings/clock/altr_socfpga.txt

@@ -0,0 +1,18 @@
+Device Tree Clock bindings for Altera's SoCFPGA platform
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+	"altr,socfpga-pll-clock" - for a PLL clock
+	"altr,socfpga-perip-clock" - The peripheral clock divided from the
+		PLL clock.
+- reg : shall be the control register offset from CLOCK_MANAGER's base for the clock.
+- clocks : shall be the input parent clock phandle for the clock. This is
+	either an oscillator or a pll output.
+- #clock-cells : from common clock binding, shall be set to 0.
+
+Optional properties:
+- fixed-divider : If clocks have a fixed divider value, use this property.

Documentation/devicetree/bindings/clock/axi-clkgen.txt

@@ -0,0 +1,22 @@
+Binding for the axi-clkgen clock generator
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "adi,axi-clkgen".
+- #clock-cells : from common clock binding; Should always be set to 0.
+- reg : Address and length of the axi-clkgen register set.
+- clocks : Phandle and clock specifier for the parent clock.
+
+Optional properties:
+- clock-output-names : From common clock binding.
+
+Example:
+	clock@0xff000000 {
+		compatible = "adi,axi-clkgen";
+		#clock-cells = <0>;
+		reg = <0xff000000 0x1000>;
+		clocks = <&osc 1>;
+	};

Documentation/devicetree/bindings/clock/fixed-factor-clock.txt

@@ -0,0 +1,24 @@
+Binding for simple fixed factor rate clock sources.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "fixed-factor-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clock-div: fixed divider.
+- clock-mult: fixed multiplier.
+- clocks: parent clock.
+
+Optional properties:
+- clock-output-names : From common clock binding.
+
+Example:
+	clock {
+		compatible = "fixed-factor-clock";
+		clocks = <&parentclk>;
+		#clock-cells = <0>;
+		div = <2>;
+		mult = <1>;
+	};

Documentation/devicetree/bindings/clock/imx27-clock.txt

@@ -0,0 +1,117 @@
+* Clock bindings for Freescale i.MX27
+
+Required properties:
+- compatible: Should be "fsl,imx27-ccm"
+- reg: Address and length of the register set
+- interrupts: Should contain CCM interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  The following is a full list of i.MX27
+clocks and IDs.
+
+	Clock		    ID
+	-----------------------
+	dummy                0
+	ckih                 1
+	ckil                 2
+	mpll                 3
+	spll                 4
+	mpll_main2           5
+	ahb                  6
+	ipg                  7
+	nfc_div              8
+	per1_div             9
+	per2_div             10
+	per3_div             11
+	per4_div             12
+	vpu_sel              13
+	vpu_div              14
+	usb_div              15
+	cpu_sel              16
+	clko_sel             17
+	cpu_div              18
+	clko_div             19
+	ssi1_sel             20
+	ssi2_sel             21
+	ssi1_div             22
+	ssi2_div             23
+	clko_en              24
+	ssi2_ipg_gate        25
+	ssi1_ipg_gate        26
+	slcdc_ipg_gate       27
+	sdhc3_ipg_gate       28
+	sdhc2_ipg_gate       29
+	sdhc1_ipg_gate       30
+	scc_ipg_gate         31
+	sahara_ipg_gate      32
+	rtc_ipg_gate         33
+	pwm_ipg_gate         34
+	owire_ipg_gate       35
+	lcdc_ipg_gate        36
+	kpp_ipg_gate         37
+	iim_ipg_gate         38
+	i2c2_ipg_gate        39
+	i2c1_ipg_gate        40
+	gpt6_ipg_gate        41
+	gpt5_ipg_gate        42
+	gpt4_ipg_gate        43
+	gpt3_ipg_gate        44
+	gpt2_ipg_gate        45
+	gpt1_ipg_gate        46
+	gpio_ipg_gate        47
+	fec_ipg_gate         48
+	emma_ipg_gate        49
+	dma_ipg_gate         50
+	cspi3_ipg_gate       51
+	cspi2_ipg_gate       52
+	cspi1_ipg_gate       53
+	nfc_baud_gate        54
+	ssi2_baud_gate       55
+	ssi1_baud_gate       56
+	vpu_baud_gate        57
+	per4_gate            58
+	per3_gate            59
+	per2_gate            60
+	per1_gate            61
+	usb_ahb_gate         62
+	slcdc_ahb_gate       63
+	sahara_ahb_gate      64
+	lcdc_ahb_gate        65
+	vpu_ahb_gate         66
+	fec_ahb_gate         67
+	emma_ahb_gate        68
+	emi_ahb_gate         69
+	dma_ahb_gate         70
+	csi_ahb_gate         71
+	brom_ahb_gate        72
+	ata_ahb_gate         73
+	wdog_ipg_gate        74
+	usb_ipg_gate         75
+	uart6_ipg_gate       76
+	uart5_ipg_gate       77
+	uart4_ipg_gate       78
+	uart3_ipg_gate       79
+	uart2_ipg_gate       80
+	uart1_ipg_gate       81
+	ckih_div1p5          82
+	fpm                  83
+	mpll_osc_sel         84
+	mpll_sel             85
+
+Examples:
+
+clks: ccm@10027000{
+	compatible = "fsl,imx27-ccm";
+	reg = <0x10027000 0x1000>;
+	#clock-cells = <1>;
+};
+
+uart1: serial@1000a000 {
+	compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+	reg = <0x1000a000 0x1000>;
+	interrupts = <20>;
+	clocks = <&clks 81>, <&clks 61>;
+	clock-names = "ipg", "per";
+	status = "disabled";
+};

Documentation/devicetree/bindings/clock/silabs,si5351.txt

@@ -0,0 +1,114 @@
+Binding for Silicon Labs Si5351a/b/c programmable i2c clock generator.
+
+Reference
+[1] Si5351A/B/C Data Sheet
+    http://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf
+
+The Si5351a/b/c are programmable i2c clock generators with upto 8 output
+clocks. Si5351a also has a reduced pin-count package (MSOP10) where only
+3 output clocks are accessible. The internal structure of the clock
+generators can be found in [1].
+
+==I2C device node==
+
+Required properties:
+- compatible: shall be one of "silabs,si5351{a,a-msop,b,c}".
+- reg: i2c device address, shall be 0x60 or 0x61.
+- #clock-cells: from common clock binding; shall be set to 1.
+- clocks: from common clock binding; list of parent clock
+  handles, shall be xtal reference clock or xtal and clkin for
+  si5351c only.
+- #address-cells: shall be set to 1.
+- #size-cells: shall be set to 0.
+
+Optional properties:
+- silabs,pll-source: pair of (number, source) for each pll. Allows
+  to overwrite clock source of pll A (number=0) or B (number=1).
+
+==Child nodes==
+
+Each of the clock outputs can be overwritten individually by
+using a child node to the I2C device node. If a child node for a clock
+output is not set, the eeprom configuration is not overwritten.
+
+Required child node properties:
+- reg: number of clock output.
+
+Optional child node properties:
+- silabs,clock-source: source clock of the output divider stage N, shall be
+  0 = multisynth N
+  1 = multisynth 0 for output clocks 0-3, else multisynth4
+  2 = xtal
+  3 = clkin (si5351c only)
+- silabs,drive-strength: output drive strength in mA, shall be one of {2,4,6,8}.
+- silabs,multisynth-source: source pll A(0) or B(1) of corresponding multisynth
+  divider.
+- silabs,pll-master: boolean, multisynth can change pll frequency.
+
+==Example==
+
+/* 25MHz reference crystal */
+ref25: ref25M {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <25000000>;
+};
+
+i2c-master-node {
+
+	/* Si5351a msop10 i2c clock generator */
+	si5351a: clock-generator@60 {
+		compatible = "silabs,si5351a-msop";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#clock-cells = <1>;
+
+		/* connect xtal input to 25MHz reference */
+		clocks = <&ref25>;
+
+		/* connect xtal input as source of pll0 and pll1 */
+		silabs,pll-source = <0 0>, <1 0>;
+
+		/*
+		 * overwrite clkout0 configuration with:
+		 * - 8mA output drive strength
+		 * - pll0 as clock source of multisynth0
+		 * - multisynth0 as clock source of output divider
+		 * - multisynth0 can change pll0
+		 * - set initial clock frequency of 74.25MHz
+		 */
+		clkout0 {
+			reg = <0>;
+			silabs,drive-strength = <8>;
+			silabs,multisynth-source = <0>;
+			silabs,clock-source = <0>;
+			silabs,pll-master;
+			clock-frequency = <74250000>;
+		};
+
+		/*
+		 * overwrite clkout1 configuration with:
+		 * - 4mA output drive strength
+		 * - pll1 as clock source of multisynth1
+		 * - multisynth1 as clock source of output divider
+		 * - multisynth1 can change pll1
+		 */
+		clkout1 {
+			reg = <1>;
+			silabs,drive-strength = <4>;
+			silabs,multisynth-source = <1>;
+			silabs,clock-source = <0>;
+			pll-master;
+		};
+
+		/*
+		 * overwrite clkout2 configuration with:
+		 * - xtal as clock source of output divider
+		 */
+		clkout2 {
+			reg = <2>;
+			silabs,clock-source = <2>;
+		};
+	};
+};

Documentation/devicetree/bindings/clock/sunxi.txt

@@ -0,0 +1,151 @@
+Device Tree Clock bindings for arch-sunxi
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+	"allwinner,sun4i-osc-clk" - for a gatable oscillator
+	"allwinner,sun4i-pll1-clk" - for the main PLL clock
+	"allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock
+	"allwinner,sun4i-axi-clk" - for the AXI clock
+	"allwinner,sun4i-axi-gates-clk" - for the AXI gates
+	"allwinner,sun4i-ahb-clk" - for the AHB clock
+	"allwinner,sun4i-ahb-gates-clk" - for the AHB gates
+	"allwinner,sun4i-apb0-clk" - for the APB0 clock
+	"allwinner,sun4i-apb0-gates-clk" - for the APB0 gates
+	"allwinner,sun4i-apb1-clk" - for the APB1 clock
+	"allwinner,sun4i-apb1-mux-clk" - for the APB1 clock muxing
+	"allwinner,sun4i-apb1-gates-clk" - for the APB1 gates
+
+Required properties for all clocks:
+- reg : shall be the control register address for the clock.
+- clocks : shall be the input parent clock(s) phandle for the clock
+- #clock-cells : from common clock binding; shall be set to 0 except for
+	"allwinner,sun4i-*-gates-clk" where it shall be set to 1
+
+Additionally, "allwinner,sun4i-*-gates-clk" clocks require:
+- clock-output-names : the corresponding gate names that the clock controls
+
+For example:
+
+osc24M: osc24M@01c20050 {
+	#clock-cells = <0>;
+	compatible = "allwinner,sun4i-osc-clk";
+	reg = <0x01c20050 0x4>;
+	clocks = <&osc24M_fixed>;
+};
+
+pll1: pll1@01c20000 {
+	#clock-cells = <0>;
+	compatible = "allwinner,sun4i-pll1-clk";
+	reg = <0x01c20000 0x4>;
+	clocks = <&osc24M>;
+};
+
+cpu: cpu@01c20054 {
+	#clock-cells = <0>;
+	compatible = "allwinner,sun4i-cpu-clk";
+	reg = <0x01c20054 0x4>;
+	clocks = <&osc32k>, <&osc24M>, <&pll1>;
+};
+
+
+
+Gate clock outputs
+
+The "allwinner,sun4i-*-gates-clk" clocks provide several gatable outputs;
+their corresponding offsets as present on sun4i are listed below. Note that
+some of these gates are not present on sun5i.
+
+  * AXI gates ("allwinner,sun4i-axi-gates-clk")
+
+    DRAM                                                                0
+
+  * AHB gates ("allwinner,sun4i-ahb-gates-clk")
+
+    USB0                                                                0
+    EHCI0                                                               1
+    OHCI0                                                               2*
+    EHCI1                                                               3
+    OHCI1                                                               4*
+    SS                                                                  5
+    DMA                                                                 6
+    BIST                                                                7
+    MMC0                                                                8
+    MMC1                                                                9
+    MMC2                                                                10
+    MMC3                                                                11
+    MS                                                                  12**
+    NAND                                                                13
+    SDRAM                                                               14
+
+    ACE                                                                 16
+    EMAC                                                                17
+    TS                                                                  18
+
+    SPI0                                                                20
+    SPI1                                                                21
+    SPI2                                                                22
+    SPI3                                                                23
+    PATA                                                                24
+    SATA                                                                25**
+    GPS                                                                 26*
+
+    VE                                                                  32
+    TVD                                                                 33
+    TVE0                                                                34
+    TVE1                                                                35
+    LCD0                                                                36
+    LCD1                                                                37
+
+    CSI0                                                                40
+    CSI1                                                                41
+
+    HDMI                                                                43
+    DE_BE0                                                              44
+    DE_BE1                                                              45
+    DE_FE0                                                              46
+    DE_FE1                                                              47
+
+    MP                                                                  50
+
+    MALI400                                                             52
+
+  * APB0 gates ("allwinner,sun4i-apb0-gates-clk")
+
+    CODEC                                                               0
+    SPDIF                                                               1*
+    AC97                                                                2
+    IIS                                                                 3
+
+    PIO                                                                 5
+    IR0                                                                 6
+    IR1                                                                 7
+
+    KEYPAD                                                              10
+
+  * APB1 gates ("allwinner,sun4i-apb1-gates-clk")
+
+    I2C0                                                                0
+    I2C1                                                                1
+    I2C2                                                                2
+
+    CAN                                                                 4
+    SCR                                                                 5
+    PS20                                                                6
+    PS21                                                                7
+
+    UART0                                                               16
+    UART1                                                               17
+    UART2                                                               18
+    UART3                                                               19
+    UART4                                                               20
+    UART5                                                               21
+    UART6                                                               22
+    UART7                                                               23
+
+Notation:
+ [*]:  The datasheet didn't mention these, but they are present on AW code
+ [**]: The datasheet had this marked as "NC" but they are used on AW code

Documentation/devicetree/bindings/cpufreq/arm_big_little_dt.txt

@@ -0,0 +1,65 @@
+Generic ARM big LITTLE cpufreq driver's DT glue
+-----------------------------------------------
+
+This is DT specific glue layer for generic cpufreq driver for big LITTLE
+systems.
+
+Both required and optional properties listed below must be defined
+under node /cpus/cpu@x. Where x is the first cpu inside a cluster.
+
+FIXME: Cpus should boot in the order specified in DT and all cpus for a cluster
+must be present contiguously. Generic DT driver will check only node 'x' for
+cpu:x.
+
+Required properties:
+- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt
+  for details
+
+Optional properties:
+- clock-latency: Specify the possible maximum transition latency for clock,
+  in unit of nanoseconds.
+
+Examples:
+
+cpus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	cpu@0 {
+		compatible = "arm,cortex-a15";
+		reg = <0>;
+		next-level-cache = <&L2>;
+		operating-points = <
+			/* kHz    uV */
+			792000  1100000
+			396000  950000
+			198000  850000
+		>;
+		clock-latency = <61036>; /* two CLK32 periods */
+	};
+
+	cpu@1 {
+		compatible = "arm,cortex-a15";
+		reg = <1>;
+		next-level-cache = <&L2>;
+	};
+
+	cpu@100 {
+		compatible = "arm,cortex-a7";
+		reg = <100>;
+		next-level-cache = <&L2>;
+		operating-points = <
+			/* kHz    uV */
+			792000  950000
+			396000  750000
+			198000  450000
+		>;
+		clock-latency = <61036>; /* two CLK32 periods */
+	};
+
+	cpu@101 {
+		compatible = "arm,cortex-a7";
+		reg = <101>;
+		next-level-cache = <&L2>;
+	};
+};

Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt

@@ -32,7 +32,7 @@ cpus {
 			396000  950000
 			198000  850000
 		>;
-		transition-latency = <61036>; /* two CLK32 periods */
+		clock-latency = <61036>; /* two CLK32 periods */
 	};
 
 	cpu@1 {

Documentation/devicetree/bindings/cpufreq/cpufreq-exynos5440.txt

@@ -0,0 +1,28 @@
+
+Exynos5440 cpufreq driver
+-------------------
+
+Exynos5440 SoC cpufreq driver for CPU frequency scaling.
+
+Required properties:
+- interrupts: Interrupt to know the completion of cpu frequency change.
+- operating-points: Table of frequencies and voltage CPU could be transitioned into,
+	in the decreasing order. Frequency should be in KHz units and voltage
+	should be in microvolts.
+
+Optional properties:
+- clock-latency: Clock monitor latency in microsecond.
+
+All the required listed above must be defined under node cpufreq.
+
+Example:
+--------
+	cpufreq@160000 {
+		compatible = "samsung,exynos5440-cpufreq";
+		reg = <0x160000 0x1000>;
+		interrupts = <0 57 0>;
+		operating-points = <
+				1000000 975000
+				800000  925000>;
+		clock-latency = <100000>;
+	};

Documentation/devicetree/bindings/crypto/fsl-imx-sahara.txt

@@ -0,0 +1,15 @@
+Freescale SAHARA Cryptographic Accelerator included in some i.MX chips.
+Currently only i.MX27 is supported.
+
+Required properties:
+- compatible : Should be "fsl,<soc>-sahara"
+- reg : Should contain SAHARA registers location and length
+- interrupts : Should contain SAHARA interrupt number
+
+Example:
+
+sah@10025000 {
+	compatible = "fsl,imx27-sahara";
+	reg = <	0x10025000 0x800>;
+	interrupts = <75>;
+};

Documentation/devicetree/bindings/drm/exynos/g2d.txt

@@ -1,22 +0,0 @@
-Samsung 2D Graphic Accelerator using DRM frame work
-
-Samsung FIMG2D is a graphics 2D accelerator which supports Bit Block Transfer.
-We set the drawing-context registers for configuring rendering parameters and
-then start rendering.
-This driver is for SOCs which contain G2D IPs with version 4.1.
-
-Required properties:
-	-compatible:
-		should be "samsung,exynos-g2d-41".
-	-reg:
-		physical base address of the controller and length
-		of memory mapped region.
-	-interrupts:
-		interrupt combiner values.
-
-Example:
-	g2d {
-		compatible = "samsung,exynos-g2d-41";
-		reg = <0x10850000 0x1000>;
-		interrupts = <0 91 0>;
-	};

Documentation/devicetree/bindings/gpio/gpio.txt

@@ -98,7 +98,7 @@ announce the pinrange to the pin ctrl subsystem. For example,
 		compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
 		reg = <0x1460 0x18>;
 		gpio-controller;
-		gpio-ranges = <&pinctrl1 20 10>, <&pinctrl2 50 20>;
+		gpio-ranges = <&pinctrl1 0 20 10>, <&pinctrl2 10 50 20>;
 
     }
 
@@ -107,8 +107,8 @@ where,
 
    Next values specify the base pin and number of pins for the range
    handled by 'qe_pio_e' gpio. In the given example from base pin 20 to
-   pin 29 under pinctrl1 and pin 50 to pin 69 under pinctrl2 is handled
-   by this gpio controller.
+   pin 29 under pinctrl1 with gpio offset 0 and pin 50 to pin 69 under
+   pinctrl2 with gpio offset 10 is handled by this gpio controller.
 
 The pinctrl node must have "#gpio-range-cells" property to show number of
 arguments to pass with phandle from gpio controllers node.

Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt

@@ -0,0 +1,29 @@
+NTC Thermistor hwmon sensors
+-------------------------------
+
+Requires node properties:
+- "compatible" value : one of
+	"ntc,ncp15wb473"
+	"ntc,ncp18wb473"
+	"ntc,ncp21wb473"
+	"ntc,ncp03wb473"
+	"ntc,ncp15wl333"
+- "pullup-uv"	Pull up voltage in micro volts
+- "pullup-ohm"	Pull up resistor value in ohms
+- "pulldown-ohm" Pull down resistor value in ohms
+- "connected-positive" Always ON, If not specified.
+		Status change is possible.
+- "io-channels"	Channel node of ADC to be used for
+		conversion.
+
+Read more about iio bindings at
+	Documentation/devicetree/bindings/iio/iio-bindings.txt
+
+Example:
+	ncp15wb473@0 {
+		compatible = "ntc,ncp15wb473";
+		pullup-uv = <1800000>;
+		pullup-ohm = <47000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc 3>;
+	};

Documentation/devicetree/bindings/hwrng/timeriomem_rng.txt

@@ -0,0 +1,18 @@
+HWRNG support for the timeriomem_rng driver
+
+Required properties:
+- compatible : "timeriomem_rng"
+- reg : base address to sample from
+- period : wait time in microseconds to use between samples
+
+N.B. currently 'reg' must be four bytes wide and aligned
+
+Example:
+
+hwrng@44 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "timeriomem_rng";
+	reg = <0x44 0x04>;
+	period = <1000000>;
+};

Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt

@@ -0,0 +1,80 @@
+GPIO-based I2C Arbitration Using a Challenge & Response Mechanism
+=================================================================
+This uses GPIO lines and a challenge & response mechanism to arbitrate who is
+the master of an I2C bus in a multimaster situation.
+
+In many cases using GPIOs to arbitrate is not needed and a design can use
+the standard I2C multi-master rules.  Using GPIOs is generally useful in
+the case where there is a device on the bus that has errata and/or bugs
+that makes standard multimaster mode not feasible.
+
+
+Algorithm:
+
+All masters on the bus have a 'bus claim' line which is an output that the
+others can see. These are all active low with pull-ups enabled.  We'll
+describe these lines as:
+
+- OUR_CLAIM: output from us signaling to other hosts that we want the bus
+- THEIR_CLAIMS: output from others signaling that they want the bus
+
+The basic algorithm is to assert your line when you want the bus, then make
+sure that the other side doesn't want it also.  A detailed explanation is best
+done with an example.
+
+Let's say we want to claim the bus.  We:
+1. Assert OUR_CLAIM.
+2. Waits a little bit for the other sides to notice (slew time, say 10
+   microseconds).
+3. Check THEIR_CLAIMS.  If none are asserted then the we have the bus and we are
+   done.
+4. Otherwise, wait for a few milliseconds and see if THEIR_CLAIMS are released.
+5. If not, back off, release the claim and wait for a few more milliseconds.
+6. Go back to 1 (until retry time has expired).
+
+
+Required properties:
+- compatible: i2c-arb-gpio-challenge
+- our-claim-gpio: The GPIO that we use to claim the bus.
+- their-claim-gpios: The GPIOs that the other sides use to claim the bus.
+  Note that some implementations may only support a single other master.
+- Standard I2C mux properties. See mux.txt in this directory.
+- Single I2C child bus node at reg 0. See mux.txt in this directory.
+
+Optional properties:
+- slew-delay-us: microseconds to wait for a GPIO to go high. Default is 10 us.
+- wait-retry-us: we'll attempt another claim after this many microseconds.
+    Default is 3000 us.
+- wait-free-us: we'll give up after this many microseconds. Default is 50000 us.
+
+
+Example:
+	i2c@12CA0000 {
+		compatible = "acme,some-i2c-device";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	i2c-arbitrator {
+		compatible = "i2c-arb-gpio-challenge";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@12CA0000}>;
+
+		our-claim-gpio = <&gpf0 3 1>;
+		their-claim-gpios = <&gpe0 4 1>;
+		slew-delay-us = <10>;
+		wait-retry-us = <3000>;
+		wait-free-us = <50000>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2c@52 {
+				// Normal I2C device
+			};
+		};
+	};

Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt

@@ -26,7 +26,7 @@ Required for all cases except "samsung,s3c2440-hdmiphy-i2c":
     - pinctrl-names: Should contain only one value - "default".
 
 Optional properties:
-  - samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not
+  - samsung,i2c-slave-addr: Slave address in multi-master environment. If not
     specified, default value is 0.
   - samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not
     specified, the default value in Hz is 100000.

Documentation/devicetree/bindings/i2c/trivial-devices.txt

@@ -35,6 +35,8 @@ fsl,mc13892		MC13892: Power Management Integrated Circuit (PMIC) for i.MX35/51
 fsl,mma8450		MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer
 fsl,mpr121		MPR121: Proximity Capacitive Touch Sensor Controller
 fsl,sgtl5000		SGTL5000: Ultra Low-Power Audio Codec
+infineon,slb9635tt	Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz)
+infineon,slb9645tt	Infineon SLB9645 I2C TPM (new protocol, max 400khz)
 maxim,ds1050		5 Bit Programmable, Pulse-Width Modulator
 maxim,max1237		Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs
 maxim,max6625		9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface

Documentation/devicetree/bindings/iio/iio-bindings.txt

@@ -0,0 +1,97 @@
+This binding is derived from clock bindings, and based on suggestions
+from Lars-Peter Clausen [1].
+
+Sources of IIO channels can be represented by any node in the device
+tree. Those nodes are designated as IIO providers. IIO consumer
+nodes use a phandle and IIO specifier pair to connect IIO provider
+outputs to IIO inputs. Similar to the gpio specifiers, an IIO
+specifier is an array of one or more cells identifying the IIO
+output on a device. The length of an IIO specifier is defined by the
+value of a #io-channel-cells property in the IIO provider node.
+
+[1] http://marc.info/?l=linux-iio&m=135902119507483&w=2
+
+==IIO providers==
+
+Required properties:
+#io-channel-cells: Number of cells in an IIO specifier; Typically 0 for nodes
+		   with a single IIO output and 1 for nodes with multiple
+		   IIO outputs.
+
+Example for a simple configuration with no trigger:
+
+	adc: voltage-sensor@35 {
+		compatible = "maxim,max1139";
+		reg = <0x35>;
+		#io-channel-cells = <1>;
+	};
+
+Example for a configuration with trigger:
+
+	adc@35 {
+		compatible = "some-vendor,some-adc";
+		reg = <0x35>;
+
+		adc1: iio-device@0 {
+			#io-channel-cells = <1>;
+			/* other properties */
+		};
+		adc2: iio-device@1 {
+			#io-channel-cells = <1>;
+			/* other properties */
+		};
+	};
+
+==IIO consumers==
+
+Required properties:
+io-channels:	List of phandle and IIO specifier pairs, one pair
+		for each IIO input to the device. Note: if the
+		IIO provider specifies '0' for #io-channel-cells,
+		then only the phandle portion of the pair will appear.
+
+Optional properties:
+io-channel-names:
+		List of IIO input name strings sorted in the same
+		order as the io-channels property. Consumers drivers
+		will use io-channel-names to match IIO input names
+		with IIO specifiers.
+io-channel-ranges:
+		Empty property indicating that child nodes can inherit named
+		IIO channels from this node. Useful for bus nodes to provide
+		and IIO channel to their children.
+
+For example:
+
+	device {
+		io-channels = <&adc 1>, <&ref 0>;
+		io-channel-names = "vcc", "vdd";
+	};
+
+This represents a device with two IIO inputs, named "vcc" and "vdd".
+The vcc channel is connected to output 1 of the &adc device, and the
+vdd channel is connected to output 0 of the &ref device.
+
+==Example==
+
+	adc: max1139@35 {
+		compatible = "maxim,max1139";
+		reg = <0x35>;
+		#io-channel-cells = <1>;
+	};
+
+	...
+
+	iio_hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>,
+			<&adc 3>, <&adc 4>, <&adc 5>,
+			<&adc 6>, <&adc 7>, <&adc 8>,
+			<&adc 9>;
+	};
+
+	some_consumer {
+		compatible = "some-consumer";
+		io-channels = <&adc 10>, <&adc 11>;
+		io-channel-names = "adc1", "adc2";
+	};

Documentation/devicetree/bindings/input/ps2keyb-mouse-apbps2.txt

@@ -0,0 +1,16 @@
+Aeroflex Gaisler APBPS2 PS/2 Core, supporting Keyboard or Mouse.
+
+The APBPS2 PS/2 core is available in the GRLIB VHDL IP core library.
+
+Note: In the ordinary environment for the APBPS2 core, a LEON SPARC system,
+these properties are built from information in the AMBA plug&play and from
+bootloader settings.
+
+Required properties:
+
+- name : Should be "GAISLER_APBPS2" or "01_060"
+- reg : Address and length of the register set for the device
+- interrupts : Interrupt numbers for this device
+
+For further information look in the documentation for the GLIB IP core library:
+http://www.gaisler.com/products/grlib/grip.pdf

Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt

@@ -0,0 +1,30 @@
+* AUO in-cell touchscreen controller using Pixcir sensors
+
+Required properties:
+- compatible: must be "auo,auo_pixcir_ts"
+- reg: I2C address of the chip
+- interrupts: interrupt to which the chip is connected
+- gpios: gpios the chip is connected to
+  first one is the interrupt gpio and second one the reset gpio
+- x-size: horizontal resolution of touchscreen
+- y-size: vertical resolution of touchscreen
+
+Example:
+
+	i2c@00000000 {
+		/* ... */
+
+		auo_pixcir_ts@5c {
+			compatible = "auo,auo_pixcir_ts";
+			reg = <0x5c>;
+			interrupts = <2 0>;
+
+			gpios = <&gpf 2 0 2>, /* INT */
+				<&gpf 5 1 0>; /* RST */
+
+			x-size = <800>;
+			y-size = <600>;
+		};
+
+		/* ... */
+	};

Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt

@@ -0,0 +1,24 @@
+* Sitronix st1232 touchscreen controller
+
+Required properties:
+- compatible: must be "sitronix,st1232"
+- reg: I2C address of the chip
+- interrupts: interrupt to which the chip is connected
+
+Optional properties:
+- gpios: a phandle to the reset GPIO
+
+Example:
+
+	i2c@00000000 {
+		/* ... */
+
+		touchscreen@55 {
+			compatible = "sitronix,st1232";
+			reg = <0x55>;
+			interrupts = <2 0>;
+			gpios = <&gpio1 166 0>;
+		};
+
+		/* ... */
+	};

Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt

@@ -0,0 +1,104 @@
+Allwinner Sunxi Interrupt Controller
+
+Required properties:
+
+- compatible : should be "allwinner,sun4i-ic"
+- reg : Specifies base physical address and size of the registers.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 1.
+
+The interrupt sources are as follows:
+
+0: ENMI
+1: UART0
+2: UART1
+3: UART2
+4: UART3
+5: IR0
+6: IR1
+7: I2C0
+8: I2C1
+9: I2C2
+10: SPI0
+11: SPI1
+12: SPI2
+13: SPDIF
+14: AC97
+15: TS
+16: I2S
+17: UART4
+18: UART5
+19: UART6
+20: UART7
+21: KEYPAD
+22: TIMER0
+23: TIMER1
+24: TIMER2
+25: TIMER3
+26: CAN
+27: DMA
+28: PIO
+29: TOUCH_PANEL
+30: AUDIO_CODEC
+31: LRADC
+32: SDMC0
+33: SDMC1
+34: SDMC2
+35: SDMC3
+36: MEMSTICK
+37: NAND
+38: USB0
+39: USB1
+40: USB2
+41: SCR
+42: CSI0
+43: CSI1
+44: LCDCTRL0
+45: LCDCTRL1
+46: MP
+47: DEFEBE0
+48: DEFEBE1
+49: PMU
+50: SPI3
+51: TZASC
+52: PATA
+53: VE
+54: SS
+55: EMAC
+56: SATA
+57: GPS
+58: HDMI
+59: TVE
+60: ACE
+61: TVD
+62: PS2_0
+63: PS2_1
+64: USB3
+65: USB4
+66: PLE_PFM
+67: TIMER4
+68: TIMER5
+69: GPU_GP
+70: GPU_GPMMU
+71: GPU_PP0
+72: GPU_PPMMU0
+73: GPU_PMU
+74: GPU_RSV0
+75: GPU_RSV1
+76: GPU_RSV2
+77: GPU_RSV3
+78: GPU_RSV4
+79: GPU_RSV5
+80: GPU_RSV6
+82: SYNC_TIMER0
+83: SYNC_TIMER1
+
+Example:
+
+intc: interrupt-controller {
+	compatible = "allwinner,sun4i-ic";
+	reg = <0x01c20400 0x400>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+};

Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-ic.txt

@@ -1,104 +0,0 @@
-Allwinner Sunxi Interrupt Controller
-
-Required properties:
-
-- compatible : should be "allwinner,sunxi-ic"
-- reg : Specifies base physical address and size of the registers.
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 1.
-
-The interrupt sources are as follows:
-
-0: ENMI
-1: UART0
-2: UART1
-3: UART2
-4: UART3
-5: IR0
-6: IR1
-7: I2C0
-8: I2C1
-9: I2C2
-10: SPI0
-11: SPI1
-12: SPI2
-13: SPDIF
-14: AC97
-15: TS
-16: I2S
-17: UART4
-18: UART5
-19: UART6
-20: UART7
-21: KEYPAD
-22: TIMER0
-23: TIMER1
-24: TIMER2
-25: TIMER3
-26: CAN
-27: DMA
-28: PIO
-29: TOUCH_PANEL
-30: AUDIO_CODEC
-31: LRADC
-32: SDMC0
-33: SDMC1
-34: SDMC2
-35: SDMC3
-36: MEMSTICK
-37: NAND
-38: USB0
-39: USB1
-40: USB2
-41: SCR
-42: CSI0
-43: CSI1
-44: LCDCTRL0
-45: LCDCTRL1
-46: MP
-47: DEFEBE0
-48: DEFEBE1
-49: PMU
-50: SPI3
-51: TZASC
-52: PATA
-53: VE
-54: SS
-55: EMAC
-56: SATA
-57: GPS
-58: HDMI
-59: TVE
-60: ACE
-61: TVD
-62: PS2_0
-63: PS2_1
-64: USB3
-65: USB4
-66: PLE_PFM
-67: TIMER4
-68: TIMER5
-69: GPU_GP
-70: GPU_GPMMU
-71: GPU_PP0
-72: GPU_PPMMU0
-73: GPU_PMU
-74: GPU_RSV0
-75: GPU_RSV1
-76: GPU_RSV2
-77: GPU_RSV3
-78: GPU_RSV4
-79: GPU_RSV5
-80: GPU_RSV6
-82: SYNC_TIMER0
-83: SYNC_TIMER1
-
-Example:
-
-intc: interrupt-controller {
-	compatible = "allwinner,sunxi-ic";
-	reg = <0x01c20400 0x400>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-};

Documentation/devicetree/bindings/leds/tca6507.txt

@@ -1,4 +1,4 @@
-LEDs conected to tca6507
+LEDs connected to tca6507
 
 Required properties:
 - compatible : should be : "ti,tca6507".

Documentation/devicetree/bindings/marvell.txt

@@ -115,6 +115,9 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd.
      - compatible : "marvell,mv64360-eth-block"
      - reg : Offset and length of the register set for this block
 
+   Optional properties:
+     - clocks : Phandle to the clock control device and gate bit
+
    Example Discovery Ethernet block node:
      ethernet-block@2000 {
 	     #address-cells = <1>;

Documentation/devicetree/bindings/media/coda.txt

@@ -0,0 +1,30 @@
+Chips&Media Coda multi-standard codec IP
+========================================
+
+Coda codec IPs are present in i.MX SoCs in various versions,
+called VPU (Video Processing Unit).
+
+Required properties:
+- compatible : should be "fsl,<chip>-src" for i.MX SoCs:
+  (a) "fsl,imx27-vpu" for CodaDx6 present in i.MX27
+  (b) "fsl,imx53-vpu" for CODA7541 present in i.MX53
+  (c) "fsl,imx6q-vpu" for CODA960 present in i.MX6q
+- reg: should be register base and length as documented in the
+  SoC reference manual
+- interrupts : Should contain the VPU interrupt. For CODA960,
+  a second interrupt is needed for the MJPEG unit.
+- clocks : Should contain the ahb and per clocks, in the order
+  determined by the clock-names property.
+- clock-names : Should be "ahb", "per"
+- iram : phandle pointing to the SRAM device node
+
+Example:
+
+vpu: vpu@63ff4000 {
+	compatible = "fsl,imx53-vpu";
+	reg = <0x63ff4000 0x1000>;
+	interrupts = <9>;
+	clocks = <&clks 63>, <&clks 63>;
+	clock-names = "ahb", "per";
+	iram = <&ocram>;
+};

Documentation/devicetree/bindings/media/exynos-fimc-lite.txt

@@ -0,0 +1,14 @@
+Exynos4x12/Exynos5 SoC series camera host interface (FIMC-LITE)
+
+Required properties:
+
+- compatible	: should be "samsung,exynos4212-fimc" for Exynos4212 and
+		  Exynos4412 SoCs;
+- reg		: physical base address and size of the device memory mapped
+		  registers;
+- interrupts	: should contain FIMC-LITE interrupt;
+- clocks	: FIMC LITE gate clock should be specified in this property.
+- clock-names	: should contain "flite" entry.
+
+Each FIMC device should have an alias in the aliases node, in the form of
+fimc-lite<n>, where <n> is an integer specifying the IP block instance.

Documentation/devicetree/bindings/media/exynos4-fimc-is.txt

@@ -0,0 +1,49 @@
+Exynos4x12 SoC series Imaging Subsystem (FIMC-IS)
+
+The FIMC-IS is a subsystem for processing image signal from an image sensor.
+The Exynos4x12 SoC series FIMC-IS V1.5 comprises of a dedicated ARM Cortex-A5
+processor, ISP, DRC and FD IP blocks and peripheral devices such as UART, I2C
+and SPI bus controllers, PWM and ADC.
+
+fimc-is node
+------------
+
+Required properties:
+- compatible	: should be "samsung,exynos4212-fimc-is" for Exynos4212 and
+		  Exynos4412 SoCs;
+- reg		: physical base address and length of the registers set;
+- interrupts	: must contain two FIMC-IS interrupts, in order: ISP0, ISP1;
+- clocks	: list of clock specifiers, corresponding to entries in
+		  clock-names property;
+- clock-names	: must contain "ppmuispx", "ppmuispx", "lite0", "lite1"
+		  "mpll", "sysreg", "isp", "drc", "fd", "mcuisp", "uart",
+		  "ispdiv0", "ispdiv1", "mcuispdiv0", "mcuispdiv1", "aclk200",
+		  "div_aclk200", "aclk400mcuisp", "div_aclk400mcuisp" entries,
+		  matching entries in the clocks property.
+pmu subnode
+-----------
+
+Required properties:
+ - reg : must contain PMU physical base address and size of the register set.
+
+The following are the FIMC-IS peripheral device nodes and can be specified
+either standalone or as the fimc-is node child nodes.
+
+i2c-isp (ISP I2C bus controller) nodes
+------------------------------------------
+
+Required properties:
+
+- compatible	: should be "samsung,exynos4212-i2c-isp" for Exynos4212 and
+		  Exynos4412 SoCs;
+- reg		: physical base address and length of the registers set;
+- clocks	: must contain gate clock specifier for this controller;
+- clock-names	: must contain "i2c_isp" entry.
+
+For the above nodes it is required to specify a pinctrl state named "default",
+according to the pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt.
+
+Device tree nodes of the image sensors' controlled directly by the FIMC-IS
+firmware must be child nodes of their corresponding ISP I2C bus controller node.
+The data link of these image sensors must be specified using the common video
+interfaces bindings, defined in video-interfaces.txt.

Documentation/devicetree/bindings/media/samsung-fimc.txt

@@ -0,0 +1,197 @@
+Samsung S5P/EXYNOS SoC Camera Subsystem (FIMC)
+----------------------------------------------
+
+The S5P/Exynos SoC Camera subsystem comprises of multiple sub-devices
+represented by separate device tree nodes. Currently this includes: FIMC (in
+the S5P SoCs series known as CAMIF), MIPI CSIS, FIMC-LITE and FIMC-IS (ISP).
+
+The sub-subdevices are defined as child nodes of the common 'camera' node which
+also includes common properties of the whole subsystem not really specific to
+any single sub-device, like common camera port pins or the CAMCLK clock outputs
+for external image sensors attached to an SoC.
+
+Common 'camera' node
+--------------------
+
+Required properties:
+
+- compatible	: must be "samsung,fimc", "simple-bus"
+- clocks	: list of clock specifiers, corresponding to entries in
+		  the clock-names property;
+- clock-names	: must contain "sclk_cam0", "sclk_cam1", "pxl_async0",
+		  "pxl_async1" entries, matching entries in the clocks property.
+
+The pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt must be used
+to define a required pinctrl state named "default" and optional pinctrl states:
+"idle", "active-a", active-b". These optional states can be used to switch the
+camera port pinmux at runtime. The "idle" state should configure both the camera
+ports A and B into high impedance state, especially the CAMCLK clock output
+should be inactive. For the "active-a" state the camera port A must be activated
+and the port B deactivated and for the state "active-b" it should be the other
+way around.
+
+The 'camera' node must include at least one 'fimc' child node.
+
+'fimc' device nodes
+-------------------
+
+Required properties:
+
+- compatible: "samsung,s5pv210-fimc" for S5PV210, "samsung,exynos4210-fimc"
+  for Exynos4210 and "samsung,exynos4212-fimc" for Exynos4x12 SoCs;
+- reg: physical base address and length of the registers set for the device;
+- interrupts: should contain FIMC interrupt;
+- clocks: list of clock specifiers, must contain an entry for each required
+  entry in clock-names;
+- clock-names: must contain "fimc", "sclk_fimc" entries.
+- samsung,pix-limits: an array of maximum supported image sizes in pixels, for
+  details refer to Table 2-1 in the S5PV210 SoC User Manual; The meaning of
+  each cell is as follows:
+  0 - scaler input horizontal size,
+  1 - input horizontal size for the scaler bypassed,
+  2 - REAL_WIDTH without input rotation,
+  3 - REAL_HEIGHT with input rotation,
+- samsung,sysreg: a phandle to the SYSREG node.
+
+Each FIMC device should have an alias in the aliases node, in the form of
+fimc<n>, where <n> is an integer specifying the IP block instance.
+
+Optional properties:
+
+- clock-frequency: maximum FIMC local clock (LCLK) frequency;
+- samsung,min-pix-sizes: an array specyfing minimum image size in pixels at
+  the FIMC input and output DMA, in the first and second cell respectively.
+  Default value when this property is not present is <16 16>;
+- samsung,min-pix-alignment: minimum supported image height alignment (first
+  cell) and the horizontal image offset (second cell). The values are in pixels
+  and default to <2 1> when this property is not present;
+- samsung,mainscaler-ext: a boolean property indicating whether the FIMC IP
+  supports extended image size and has CIEXTEN register;
+- samsung,rotators: a bitmask specifying whether this IP has the input and
+  the output rotator. Bits 4 and 0 correspond to input and output rotator
+  respectively. If a rotator is present its corresponding bit should be set.
+  Default value when this property is not specified is 0x11.
+- samsung,cam-if: a bolean property indicating whether the IP block includes
+  the camera input interface.
+- samsung,isp-wb: this property must be present if the IP block has the ISP
+  writeback input.
+- samsung,lcd-wb: this property must be present if the IP block has the LCD
+  writeback input.
+
+
+'parallel-ports' node
+---------------------
+
+This node should contain child 'port' nodes specifying active parallel video
+input ports. It includes camera A and camera B inputs. 'reg' property in the
+port nodes specifies data input - 0, 1 indicates input A, B respectively.
+
+Optional properties
+
+- samsung,camclk-out : specifies clock output for remote sensor,
+		       0 - CAM_A_CLKOUT, 1 - CAM_B_CLKOUT;
+
+Image sensor nodes
+------------------
+
+The sensor device nodes should be added to their control bus controller (e.g.
+I2C0) nodes and linked to a port node in the csis or the parallel-ports node,
+using the common video interfaces bindings, defined in video-interfaces.txt.
+The implementation of this bindings requires clock-frequency property to be
+present in the sensor device nodes.
+
+Example:
+
+	aliases {
+		fimc0 = &fimc_0;
+	};
+
+	/* Parallel bus IF sensor */
+	i2c_0: i2c@13860000 {
+		s5k6aa: sensor@3c {
+			compatible = "samsung,s5k6aafx";
+			reg = <0x3c>;
+			vddio-supply = <...>;
+
+			clock-frequency = <24000000>;
+			clocks = <...>;
+			clock-names = "mclk";
+
+			port {
+				s5k6aa_ep: endpoint {
+					remote-endpoint = <&fimc0_ep>;
+					bus-width = <8>;
+					hsync-active = <0>;
+					vsync-active = <1>;
+					pclk-sample = <1>;
+				};
+			};
+		};
+	};
+
+	/* MIPI CSI-2 bus IF sensor */
+	s5c73m3: sensor@0x1a {
+		compatible = "samsung,s5c73m3";
+		reg = <0x1a>;
+		vddio-supply = <...>;
+
+		clock-frequency = <24000000>;
+		clocks = <...>;
+		clock-names = "mclk";
+
+		port {
+			s5c73m3_1: endpoint {
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&csis0_ep>;
+			};
+		};
+	};
+
+	camera {
+		compatible = "samsung,fimc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		status = "okay";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_port_a_clk_active>;
+
+		/* parallel camera ports */
+		parallel-ports {
+			/* camera A input */
+			port@0 {
+				reg = <0>;
+				fimc0_ep: endpoint {
+					remote-endpoint = <&s5k6aa_ep>;
+					bus-width = <8>;
+					hsync-active = <0>;
+					vsync-active = <1>;
+					pclk-sample = <1>;
+				};
+			};
+		};
+
+		fimc_0: fimc@11800000 {
+			compatible = "samsung,exynos4210-fimc";
+			reg = <0x11800000 0x1000>;
+			interrupts = <0 85 0>;
+			status = "okay";
+		};
+
+		csis_0: csis@11880000 {
+			compatible = "samsung,exynos4210-csis";
+			reg = <0x11880000 0x1000>;
+			interrupts = <0 78 0>;
+			/* camera C input */
+			port@3 {
+				reg = <3>;
+				csis0_ep: endpoint {
+					remote-endpoint = <&s5c73m3_ep>;
+					data-lanes = <1 2 3 4>;
+					samsung,csis-hs-settle = <12>;
+				};
+			};
+		};
+	};
+
+The MIPI-CSIS device binding is defined in samsung-mipi-csis.txt.

Documentation/devicetree/bindings/media/samsung-mipi-csis.txt

@@ -0,0 +1,81 @@
+Samsung S5P/EXYNOS SoC series MIPI CSI-2 receiver (MIPI CSIS)
+-------------------------------------------------------------
+
+Required properties:
+
+- compatible	  : "samsung,s5pv210-csis" for S5PV210 (S5PC110),
+		    "samsung,exynos4210-csis" for Exynos4210 (S5PC210),
+		    "samsung,exynos4212-csis" for Exynos4212/Exynos4412
+		    SoC series;
+- reg		  : offset and length of the register set for the device;
+- interrupts      : should contain MIPI CSIS interrupt; the format of the
+		    interrupt specifier depends on the interrupt controller;
+- bus-width	  : maximum number of data lanes supported (SoC specific);
+- vddio-supply    : MIPI CSIS I/O and PLL voltage supply (e.g. 1.8V);
+- vddcore-supply  : MIPI CSIS Core voltage supply (e.g. 1.1V);
+- clocks	  : list of clock specifiers, corresponding to entries in
+		    clock-names property;
+- clock-names	  : must contain "csis", "sclk_csis" entries, matching entries
+		    in the clocks property.
+
+Optional properties:
+
+- clock-frequency : The IP's main (system bus) clock frequency in Hz, default
+		    value when this property is not specified is 166 MHz;
+- samsung,csis-wclk : CSI-2 wrapper clock selection. If this property is present
+		    external clock from CMU will be used, or the bus clock if
+		    if it's not specified.
+
+The device node should contain one 'port' child node with one child 'endpoint'
+node, according to the bindings defined in Documentation/devicetree/bindings/
+media/video-interfaces.txt. The following are properties specific to those nodes.
+
+port node
+---------
+
+- reg		  : (required) must be 3 for camera C input (CSIS0) or 4 for
+		    camera D input (CSIS1);
+
+endpoint node
+-------------
+
+- data-lanes	  : (required) an array specifying active physical MIPI-CSI2
+		    data input lanes and their mapping to logical lanes; the
+		    array's content is unused, only its length is meaningful;
+
+- samsung,csis-hs-settle : (optional) differential receiver (HS-RX) settle time;
+
+
+Example:
+
+	reg0: regulator@0 {
+	};
+
+	reg1: regulator@1 {
+	};
+
+/* SoC properties */
+
+	csis_0: csis@11880000 {
+		compatible = "samsung,exynos4210-csis";
+		reg = <0x11880000 0x1000>;
+		interrupts = <0 78 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+/* Board properties */
+
+	csis_0: csis@11880000 {
+		clock-frequency = <166000000>;
+		vddio-supply = <&reg0>;
+		vddcore-supply = <&reg1>;
+		port {
+			reg = <3>; /* 3 - CSIS0, 4 - CSIS1 */
+			csis0_ep: endpoint {
+				remote-endpoint = <...>;
+				data-lanes = <1>, <2>;
+				samsung,csis-hs-settle = <12>;
+			};
+		};
+	};

Documentation/devicetree/bindings/media/video-interfaces.txt

@@ -0,0 +1,228 @@
+Common bindings for video receiver and transmitter interfaces
+
+General concept
+---------------
+
+Video data pipelines usually consist of external devices, e.g. camera sensors,
+controlled over an I2C, SPI or UART bus, and SoC internal IP blocks, including
+video DMA engines and video data processors.
+
+SoC internal blocks are described by DT nodes, placed similarly to other SoC
+blocks.  External devices are represented as child nodes of their respective
+bus controller nodes, e.g. I2C.
+
+Data interfaces on all video devices are described by their child 'port' nodes.
+Configuration of a port depends on other devices participating in the data
+transfer and is described by 'endpoint' subnodes.
+
+device {
+	...
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			...
+			endpoint@0 { ... };
+			endpoint@1 { ... };
+		};
+		port@1 { ... };
+	};
+};
+
+If a port can be configured to work with more than one remote device on the same
+bus, an 'endpoint' child node must be provided for each of them.  If more than
+one port is present in a device node or there is more than one endpoint at a
+port, or port node needs to be associated with a selected hardware interface,
+a common scheme using '#address-cells', '#size-cells' and 'reg' properties is
+used.
+
+All 'port' nodes can be grouped under optional 'ports' node, which allows to
+specify #address-cells, #size-cells properties independently for the 'port'
+and 'endpoint' nodes and any child device nodes a device might have.
+
+Two 'endpoint' nodes are linked with each other through their 'remote-endpoint'
+phandles.  An endpoint subnode of a device contains all properties needed for
+configuration of this device for data exchange with other device.  In most
+cases properties at the peer 'endpoint' nodes will be identical, however they
+might need to be different when there is any signal modifications on the bus
+between two devices, e.g. there are logic signal inverters on the lines.
+
+It is allowed for multiple endpoints at a port to be active simultaneously,
+where supported by a device.  For example, in case where a data interface of
+a device is partitioned into multiple data busses, e.g. 16-bit input port
+divided into two separate ITU-R BT.656 8-bit busses.  In such case bus-width
+and data-shift properties can be used to assign physical data lines to each
+endpoint node (logical bus).
+
+
+Required properties
+-------------------
+
+If there is more than one 'port' or more than one 'endpoint' node or 'reg'
+property is present in port and/or endpoint nodes the following properties
+are required in a relevant parent node:
+
+ - #address-cells : number of cells required to define port/endpoint
+		    identifier, should be 1.
+ - #size-cells    : should be zero.
+
+Optional endpoint properties
+----------------------------
+
+- remote-endpoint: phandle to an 'endpoint' subnode of a remote device node.
+- slave-mode: a boolean property indicating that the link is run in slave mode.
+  The default when this property is not specified is master mode. In the slave
+  mode horizontal and vertical synchronization signals are provided to the
+  slave device (data source) by the master device (data sink). In the master
+  mode the data source device is also the source of the synchronization signals.
+- bus-width: number of data lines actively used, valid for the parallel busses.
+- data-shift: on the parallel data busses, if bus-width is used to specify the
+  number of data lines, data-shift can be used to specify which data lines are
+  used, e.g. "bus-width=<8>; data-shift=<2>;" means, that lines 9:2 are used.
+- hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
+- vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively.
+  Note, that if HSYNC and VSYNC polarities are not specified, embedded
+  synchronization may be required, where supported.
+- data-active: similar to HSYNC and VSYNC, specifies data line polarity.
+- field-even-active: field signal level during the even field data transmission.
+- pclk-sample: sample data on rising (1) or falling (0) edge of the pixel clock
+  signal.
+- data-lanes: an array of physical data lane indexes. Position of an entry
+  determines the logical lane number, while the value of an entry indicates
+  physical lane, e.g. for 2-lane MIPI CSI-2 bus we could have
+  "data-lanes = <1 2>;", assuming the clock lane is on hardware lane 0.
+  This property is valid for serial busses only (e.g. MIPI CSI-2).
+- clock-lanes: an array of physical clock lane indexes. Position of an entry
+  determines the logical lane number, while the value of an entry indicates
+  physical lane, e.g. for a MIPI CSI-2 bus we could have "clock-lanes = <0>;",
+  which places the clock lane on hardware lane 0. This property is valid for
+  serial busses only (e.g. MIPI CSI-2). Note that for the MIPI CSI-2 bus this
+  array contains only one entry.
+- clock-noncontinuous: a boolean property to allow MIPI CSI-2 non-continuous
+  clock mode.
+
+
+Example
+-------
+
+The example snippet below describes two data pipelines.  ov772x and imx074 are
+camera sensors with a parallel and serial (MIPI CSI-2) video bus respectively.
+Both sensors are on the I2C control bus corresponding to the i2c0 controller
+node.  ov772x sensor is linked directly to the ceu0 video host interface.
+imx074 is linked to ceu0 through the MIPI CSI-2 receiver (csi2). ceu0 has a
+(single) DMA engine writing captured data to memory.  ceu0 node has a single
+'port' node which may indicate that at any time only one of the following data
+pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
+
+	ceu0: ceu@0xfe910000 {
+		compatible = "renesas,sh-mobile-ceu";
+		reg = <0xfe910000 0xa0>;
+		interrupts = <0x880>;
+
+		mclk: master_clock {
+			compatible = "renesas,ceu-clock";
+			#clock-cells = <1>;
+			clock-frequency = <50000000>;	/* Max clock frequency */
+			clock-output-names = "mclk";
+		};
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* Parallel bus endpoint */
+			ceu0_1: endpoint@1 {
+				reg = <1>;		/* Local endpoint # */
+				remote = <&ov772x_1_1>;	/* Remote phandle */
+				bus-width = <8>;	/* Used data lines */
+				data-shift = <2>;	/* Lines 9:2 are used */
+
+				/* If hsync-active/vsync-active are missing,
+				   embedded BT.656 sync is used */
+				hsync-active = <0>;	/* Active low */
+				vsync-active = <0>;	/* Active low */
+				data-active = <1>;	/* Active high */
+				pclk-sample = <1>;	/* Rising */
+			};
+
+			/* MIPI CSI-2 bus endpoint */
+			ceu0_0: endpoint@0 {
+				reg = <0>;
+				remote = <&csi2_2>;
+			};
+		};
+	};
+
+	i2c0: i2c@0xfff20000 {
+		...
+		ov772x_1: camera@0x21 {
+			compatible = "omnivision,ov772x";
+			reg = <0x21>;
+			vddio-supply = <&regulator1>;
+			vddcore-supply = <&regulator2>;
+
+			clock-frequency = <20000000>;
+			clocks = <&mclk 0>;
+			clock-names = "xclk";
+
+			port {
+				/* With 1 endpoint per port no need for addresses. */
+				ov772x_1_1: endpoint {
+					bus-width = <8>;
+					remote-endpoint = <&ceu0_1>;
+					hsync-active = <1>;
+					vsync-active = <0>; /* Who came up with an
+							       inverter here ?... */
+					data-active = <1>;
+					pclk-sample = <1>;
+				};
+			};
+		};
+
+		imx074: camera@0x1a {
+			compatible = "sony,imx074";
+			reg = <0x1a>;
+			vddio-supply = <&regulator1>;
+			vddcore-supply = <&regulator2>;
+
+			clock-frequency = <30000000>;	/* Shared clock with ov772x_1 */
+			clocks = <&mclk 0>;
+			clock-names = "sysclk";		/* Assuming this is the
+							   name in the datasheet */
+			port {
+				imx074_1: endpoint {
+					clock-lanes = <0>;
+					data-lanes = <1 2>;
+					remote-endpoint = <&csi2_1>;
+				};
+			};
+		};
+	};
+
+	csi2: csi2@0xffc90000 {
+		compatible = "renesas,sh-mobile-csi2";
+		reg = <0xffc90000 0x1000>;
+		interrupts = <0x17a0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			compatible = "renesas,csi2c";	/* One of CSI2I and CSI2C. */
+			reg = <1>;			/* CSI-2 PHY #1 of 2: PHY_S,
+							   PHY_M has port address 0,
+							   is unused. */
+			csi2_1: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <2 1>;
+				remote-endpoint = <&imx074_1>;
+			};
+		};
+		port@2 {
+			reg = <2>;			/* port 2: link to the CEU */
+
+			csi2_2: endpoint {
+				remote-endpoint = <&ceu0_0>;
+			};
+		};
+	};

Documentation/devicetree/bindings/metag/meta-intc.txt

@@ -12,7 +12,7 @@ Required properties:
       handle 32 interrupt sources).
 
     - interrupt-controller: The presence of this property identifies the node
-      as an interupt controller. No property value shall be defined.
+      as an interrupt controller. No property value shall be defined.
 
     - #interrupt-cells: Specifies the number of cells needed to encode an
       interrupt source. The type shall be a <u32> and the value shall be 2.

Documentation/devicetree/bindings/mfd/mc13xxx.txt

@@ -10,10 +10,40 @@ Optional properties:
 - fsl,mc13xxx-uses-touch : Indicate the touchscreen controller is being used
 
 Sub-nodes:
-- regulators : Contain the regulator nodes.  The MC13892 regulators are
-  bound using their names as listed below with their registers and bits
-  for enabling.
+- regulators : Contain the regulator nodes. The regulators are bound using
+  their names as listed below with their registers and bits for enabling.
 
+MC13783 regulators:
+    sw1a      : regulator SW1A      (register 24, bit 0)
+    sw1b      : regulator SW1B      (register 25, bit 0)
+    sw2a      : regulator SW2A      (register 26, bit 0)
+    sw2b      : regulator SW2B      (register 27, bit 0)
+    sw3       : regulator SW3       (register 29, bit 20)
+    vaudio    : regulator VAUDIO    (register 32, bit 0)
+    viohi     : regulator VIOHI     (register 32, bit 3)
+    violo     : regulator VIOLO     (register 32, bit 6)
+    vdig      : regulator VDIG      (register 32, bit 9)
+    vgen      : regulator VGEN      (register 32, bit 12)
+    vrfdig    : regulator VRFDIG    (register 32, bit 15)
+    vrfref    : regulator VRFREF    (register 32, bit 18)
+    vrfcp     : regulator VRFCP     (register 32, bit 21)
+    vsim      : regulator VSIM      (register 33, bit 0)
+    vesim     : regulator VESIM     (register 33, bit 3)
+    vcam      : regulator VCAM      (register 33, bit 6)
+    vrfbg     : regulator VRFBG     (register 33, bit 9)
+    vvib      : regulator VVIB      (register 33, bit 11)
+    vrf1      : regulator VRF1      (register 33, bit 12)
+    vrf2      : regulator VRF2      (register 33, bit 15)
+    vmmc1     : regulator VMMC1     (register 33, bit 18)
+    vmmc2     : regulator VMMC2     (register 33, bit 21)
+    gpo1      : regulator GPO1      (register 34, bit 6)
+    gpo2      : regulator GPO2      (register 34, bit 8)
+    gpo3      : regulator GPO3      (register 34, bit 10)
+    gpo4      : regulator GPO4      (register 34, bit 12)
+    pwgt1spi  : regulator PWGT1SPI  (register 34, bit 15)
+    pwgt2spi  : regulator PWGT2SPI  (register 34, bit 16)
+
+MC13892 regulators:
     vcoincell : regulator VCOINCELL (register 13, bit 23)
     sw1       : regulator SW1	    (register 24, bit 0)
     sw2       : regulator SW2	    (register 25, bit 0)

Documentation/devicetree/bindings/misc/sram.txt

@@ -0,0 +1,16 @@
+Generic on-chip SRAM
+
+Simple IO memory regions to be managed by the genalloc API.
+
+Required properties:
+
+- compatible : mmio-sram
+
+- reg : SRAM iomem address range
+
+Example:
+
+sram: sram@5c000000 {
+	compatible = "mmio-sram";
+	reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */
+};

Documentation/devicetree/bindings/mmc/davinci_mmc.txt

@@ -0,0 +1,33 @@
+* TI Highspeed MMC host controller for DaVinci
+
+The Highspeed MMC Host Controller on TI DaVinci family
+provides an interface for MMC, SD and SDIO types of memory cards.
+
+This file documents the properties used by the davinci_mmc driver.
+
+Required properties:
+- compatible:
+ Should be "ti,da830-mmc": for da830, da850, dm365
+ Should be "ti,dm355-mmc": for dm355, dm644x
+
+Optional properties:
+- bus-width: Number of data lines, can be <1>, <4>, or <8>, default <1>
+- max-frequency: Maximum operating clock frequency, default 25MHz.
+- dmas: List of DMA specifiers with the controller specific format
+	as described in the generic DMA client binding. A tx and rx
+	specifier is required.
+- dma-names: RX and TX  DMA request names. These strings correspond
+	1:1 with the DMA specifiers listed in dmas.
+
+Example:
+mmc0: mmc@1c40000 {
+	compatible = "ti,da830-mmc",
+	reg = <0x40000 0x1000>;
+	interrupts = <16>;
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	dmas = <&edma 16
+		&edma 17>;
+	dma-names = "rx", "tx";
+};

Documentation/devicetree/bindings/net/can/atmel-can.txt

@@ -0,0 +1,14 @@
+* AT91 CAN *
+
+Required properties:
+  - compatible: Should be "atmel,at91sam9263-can" or "atmel,at91sam9x5-can"
+  - reg: Should contain CAN controller registers location and length
+  - interrupts: Should contain IRQ line for the CAN controller
+
+Example:
+
+	can0: can@f000c000 {
+		compatbile = "atmel,at91sam9x5-can";
+		reg = <0xf000c000 0x300>;
+		interrupts = <40 4 5>
+	};

Documentation/devicetree/bindings/net/cpsw.txt

@@ -15,16 +15,22 @@ Required properties:
 - mac_control		: Specifies Default MAC control register content
 			  for the specific platform
 - slaves		: Specifies number for slaves
-- cpts_active_slave	: Specifies the slave to use for time stamping
+- active_slave		: Specifies the slave to use for time stamping,
+			  ethtool and SIOCGMIIPHY
 - cpts_clock_mult	: Numerator to convert input clock ticks into nanoseconds
 - cpts_clock_shift	: Denominator to convert input clock ticks into nanoseconds
-- phy_id		: Specifies slave phy id
-- mac-address		: Specifies slave MAC address
 
 Optional properties:
 - ti,hwmods		: Must be "cpgmac0"
 - no_bd_ram		: Must be 0 or 1
 - dual_emac		: Specifies Switch to act as Dual EMAC
+
+Slave Properties:
+Required properties:
+- phy_id		: Specifies slave phy id
+- mac-address		: Specifies slave MAC address
+
+Optional properties:
 - dual_emac_res_vlan	: Specifies VID to be used to segregate the ports
 
 Note: "ti,hwmods" field is used to fetch the base address and irq
@@ -47,7 +53,7 @@ Examples:
 		rx_descs = <64>;
 		mac_control = <0x20>;
 		slaves = <2>;
-		cpts_active_slave = <0>;
+		active_slave = <0>;
 		cpts_clock_mult = <0x80000000>;
 		cpts_clock_shift = <29>;
 		cpsw_emac0: slave@0 {
@@ -73,7 +79,7 @@ Examples:
 		rx_descs = <64>;
 		mac_control = <0x20>;
 		slaves = <2>;
-		cpts_active_slave = <0>;
+		active_slave = <0>;
 		cpts_clock_mult = <0x80000000>;
 		cpts_clock_shift = <29>;
 		cpsw_emac0: slave@0 {

Documentation/devicetree/bindings/net/dsa/dsa.txt

@@ -0,0 +1,91 @@
+Marvell Distributed Switch Architecture Device Tree Bindings
+------------------------------------------------------------
+
+Required properties:
+- compatible		: Should be "marvell,dsa"
+- #address-cells	: Must be 2, first cell is the address on the MDIO bus
+			  and second cell is the address in the switch tree.
+			  Second cell is used only when cascading/chaining.
+- #size-cells		: Must be 0
+- dsa,ethernet		: Should be a phandle to a valid Ethernet device node
+- dsa,mii-bus		: Should be a phandle to a valid MDIO bus device node
+
+Optionnal properties:
+- interrupts		: property with a value describing the switch
+			  interrupt number (not supported by the driver)
+
+A DSA node can contain multiple switch chips which are therefore child nodes of
+the parent DSA node. The maximum number of allowed child nodes is 4
+(DSA_MAX_SWITCHES).
+Each of these switch child nodes should have the following required properties:
+
+- reg			: Describes the switch address on the MII bus
+- #address-cells	: Must be 1
+- #size-cells		: Must be 0
+
+A switch may have multiple "port" children nodes
+
+Each port children node must have the following mandatory properties:
+- reg			: Describes the port address in the switch
+- label			: Describes the label associated with this port, special
+			  labels are "cpu" to indicate a CPU port and "dsa" to
+			  indicate an uplink/downlink port.
+
+Note that a port labelled "dsa" will imply checking for the uplink phandle
+described below.
+
+Optionnal property:
+- link			: Should be a phandle to another switch's DSA port.
+			  This property is only used when switches are being
+			  chained/cascaded together.
+
+Example:
+
+	dsa@0 {
+		compatible = "marvell,dsa";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		interrupts = <10>;
+		dsa,ethernet = <&ethernet0>;
+		dsa,mii-bus = <&mii_bus0>;
+
+		switch@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <16 0>;	/* MDIO address 16, switch 0 in tree */
+
+			port@0 {
+				reg = <0>;
+				label = "lan1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+			};
+
+			switch0uplink: port@6 {
+				reg = <6>;
+				label = "dsa";
+				link = <&switch1uplink>;
+			};
+		};
+
+		switch@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <17 1>;	/* MDIO address 17, switch 1 in tree */
+
+			switch1uplink: port@0 {
+				reg = <0>;
+				label = "dsa";
+				link = <&switch0uplink>;
+			};
+		};
+	};

Documentation/devicetree/bindings/net/marvell-orion-mdio.txt

@@ -9,6 +9,10 @@ Required properties:
 - compatible: "marvell,orion-mdio"
 - reg: address and length of the SMI register
 
+Optional properties:
+- interrupts: interrupt line number for the SMI error/done interrupt
+- clocks: Phandle to the clock control device and gate bit
+
 The child nodes of the MDIO driver are the individual PHY devices
 connected to this MDIO bus. They must have a "reg" property given the
 PHY address on the MDIO bus.

Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt

@@ -1,6 +1,6 @@
 * Atmel AT91 Pinmux Controller
 
-The AT91 Pinmux Controler, enables the IC
+The AT91 Pinmux Controller, enables the IC
 to share one PAD to several functional blocks. The sharing is done by
 multiplexing the PAD input/output signals. For each PAD there are up to
 8 muxing options (called periph modes). Since different modules require

Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt

@@ -5,7 +5,7 @@ controller, and pinmux/control device.
 
 Required properties:
 - compatible: "brcm,bcm2835-gpio"
-- reg: Should contain the physical address of the GPIO module's registes.
+- reg: Should contain the physical address of the GPIO module's registers.
 - gpio-controller: Marks the device node as a GPIO controller.
 - #gpio-cells : Should be two. The first cell is the pin number and the
   second cell is used to specify optional parameters:

Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt

@@ -24,9 +24,9 @@ Required properties for iomux controller:
 Required properties for pin configuration node:
 - fsl,pins: two integers array, represents a group of pins mux and config
   setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
-  pin working on a specific function, CONFIG is the pad setting value like
-  pull-up on this pin. Please refer to fsl,<soc>-pinctrl.txt for the valid
-  pins and functions of each SoC.
+  pin working on a specific function, which consists of a tuple of
+  <mux_reg conf_reg input_reg mux_val input_val>.  CONFIG is the pad setting
+  value like pull-up on this pin.
 
 Bits used for CONFIG:
 NO_PAD_CTL(1 << 31): indicate this pin does not need config.

Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.txt

@@ -29,956 +29,5 @@ PAD_CTL_DSE_MAX			(2 << 1)
 PAD_CTL_SRE_FAST		(1 << 0)
 PAD_CTL_SRE_SLOW		(0 << 0)
 
-See below for available PIN_FUNC_ID for imx35:
-0 MX35_PAD_CAPTURE__GPT_CAPIN1
-1 MX35_PAD_CAPTURE__GPT_CMPOUT2
-2 MX35_PAD_CAPTURE__CSPI2_SS1
-3 MX35_PAD_CAPTURE__EPIT1_EPITO
-4 MX35_PAD_CAPTURE__CCM_CLK32K
-5 MX35_PAD_CAPTURE__GPIO1_4
-6 MX35_PAD_COMPARE__GPT_CMPOUT1
-7 MX35_PAD_COMPARE__GPT_CAPIN2
-8 MX35_PAD_COMPARE__GPT_CMPOUT3
-9 MX35_PAD_COMPARE__EPIT2_EPITO
-10 MX35_PAD_COMPARE__GPIO1_5
-11 MX35_PAD_COMPARE__SDMA_EXTDMA_2
-12 MX35_PAD_WDOG_RST__WDOG_WDOG_B
-13 MX35_PAD_WDOG_RST__IPU_FLASH_STROBE
-14 MX35_PAD_WDOG_RST__GPIO1_6
-15 MX35_PAD_GPIO1_0__GPIO1_0
-16 MX35_PAD_GPIO1_0__CCM_PMIC_RDY
-17 MX35_PAD_GPIO1_0__OWIRE_LINE
-18 MX35_PAD_GPIO1_0__SDMA_EXTDMA_0
-19 MX35_PAD_GPIO1_1__GPIO1_1
-20 MX35_PAD_GPIO1_1__PWM_PWMO
-21 MX35_PAD_GPIO1_1__CSPI1_SS2
-22 MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT
-23 MX35_PAD_GPIO1_1__SDMA_EXTDMA_1
-24 MX35_PAD_GPIO2_0__GPIO2_0
-25 MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK
-26 MX35_PAD_GPIO3_0__GPIO3_0
-27 MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK
-28 MX35_PAD_RESET_IN_B__CCM_RESET_IN_B
-29 MX35_PAD_POR_B__CCM_POR_B
-30 MX35_PAD_CLKO__CCM_CLKO
-31 MX35_PAD_CLKO__GPIO1_8
-32 MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0
-33 MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1
-34 MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0
-35 MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1
-36 MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26
-37 MX35_PAD_VSTBY__CCM_VSTBY
-38 MX35_PAD_VSTBY__GPIO1_7
-39 MX35_PAD_A0__EMI_EIM_DA_L_0
-40 MX35_PAD_A1__EMI_EIM_DA_L_1
-41 MX35_PAD_A2__EMI_EIM_DA_L_2
-42 MX35_PAD_A3__EMI_EIM_DA_L_3
-43 MX35_PAD_A4__EMI_EIM_DA_L_4
-44 MX35_PAD_A5__EMI_EIM_DA_L_5
-45 MX35_PAD_A6__EMI_EIM_DA_L_6
-46 MX35_PAD_A7__EMI_EIM_DA_L_7
-47 MX35_PAD_A8__EMI_EIM_DA_H_8
-48 MX35_PAD_A9__EMI_EIM_DA_H_9
-49 MX35_PAD_A10__EMI_EIM_DA_H_10
-50 MX35_PAD_MA10__EMI_MA10
-51 MX35_PAD_A11__EMI_EIM_DA_H_11
-52 MX35_PAD_A12__EMI_EIM_DA_H_12
-53 MX35_PAD_A13__EMI_EIM_DA_H_13
-54 MX35_PAD_A14__EMI_EIM_DA_H2_14
-55 MX35_PAD_A15__EMI_EIM_DA_H2_15
-56 MX35_PAD_A16__EMI_EIM_A_16
-57 MX35_PAD_A17__EMI_EIM_A_17
-58 MX35_PAD_A18__EMI_EIM_A_18
-59 MX35_PAD_A19__EMI_EIM_A_19
-60 MX35_PAD_A20__EMI_EIM_A_20
-61 MX35_PAD_A21__EMI_EIM_A_21
-62 MX35_PAD_A22__EMI_EIM_A_22
-63 MX35_PAD_A23__EMI_EIM_A_23
-64 MX35_PAD_A24__EMI_EIM_A_24
-65 MX35_PAD_A25__EMI_EIM_A_25
-66 MX35_PAD_SDBA1__EMI_EIM_SDBA1
-67 MX35_PAD_SDBA0__EMI_EIM_SDBA0
-68 MX35_PAD_SD0__EMI_DRAM_D_0
-69 MX35_PAD_SD1__EMI_DRAM_D_1
-70 MX35_PAD_SD2__EMI_DRAM_D_2
-71 MX35_PAD_SD3__EMI_DRAM_D_3
-72 MX35_PAD_SD4__EMI_DRAM_D_4
-73 MX35_PAD_SD5__EMI_DRAM_D_5
-74 MX35_PAD_SD6__EMI_DRAM_D_6
-75 MX35_PAD_SD7__EMI_DRAM_D_7
-76 MX35_PAD_SD8__EMI_DRAM_D_8
-77 MX35_PAD_SD9__EMI_DRAM_D_9
-78 MX35_PAD_SD10__EMI_DRAM_D_10
-79 MX35_PAD_SD11__EMI_DRAM_D_11
-80 MX35_PAD_SD12__EMI_DRAM_D_12
-81 MX35_PAD_SD13__EMI_DRAM_D_13
-82 MX35_PAD_SD14__EMI_DRAM_D_14
-83 MX35_PAD_SD15__EMI_DRAM_D_15
-84 MX35_PAD_SD16__EMI_DRAM_D_16
-85 MX35_PAD_SD17__EMI_DRAM_D_17
-86 MX35_PAD_SD18__EMI_DRAM_D_18
-87 MX35_PAD_SD19__EMI_DRAM_D_19
-88 MX35_PAD_SD20__EMI_DRAM_D_20
-89 MX35_PAD_SD21__EMI_DRAM_D_21
-90 MX35_PAD_SD22__EMI_DRAM_D_22
-91 MX35_PAD_SD23__EMI_DRAM_D_23
-92 MX35_PAD_SD24__EMI_DRAM_D_24
-93 MX35_PAD_SD25__EMI_DRAM_D_25
-94 MX35_PAD_SD26__EMI_DRAM_D_26
-95 MX35_PAD_SD27__EMI_DRAM_D_27
-96 MX35_PAD_SD28__EMI_DRAM_D_28
-97 MX35_PAD_SD29__EMI_DRAM_D_29
-98 MX35_PAD_SD30__EMI_DRAM_D_30
-99 MX35_PAD_SD31__EMI_DRAM_D_31
-100 MX35_PAD_DQM0__EMI_DRAM_DQM_0
-101 MX35_PAD_DQM1__EMI_DRAM_DQM_1
-102 MX35_PAD_DQM2__EMI_DRAM_DQM_2
-103 MX35_PAD_DQM3__EMI_DRAM_DQM_3
-104 MX35_PAD_EB0__EMI_EIM_EB0_B
-105 MX35_PAD_EB1__EMI_EIM_EB1_B
-106 MX35_PAD_OE__EMI_EIM_OE
-107 MX35_PAD_CS0__EMI_EIM_CS0
-108 MX35_PAD_CS1__EMI_EIM_CS1
-109 MX35_PAD_CS1__EMI_NANDF_CE3
-110 MX35_PAD_CS2__EMI_EIM_CS2
-111 MX35_PAD_CS3__EMI_EIM_CS3
-112 MX35_PAD_CS4__EMI_EIM_CS4
-113 MX35_PAD_CS4__EMI_DTACK_B
-114 MX35_PAD_CS4__EMI_NANDF_CE1
-115 MX35_PAD_CS4__GPIO1_20
-116 MX35_PAD_CS5__EMI_EIM_CS5
-117 MX35_PAD_CS5__CSPI2_SS2
-118 MX35_PAD_CS5__CSPI1_SS2
-119 MX35_PAD_CS5__EMI_NANDF_CE2
-120 MX35_PAD_CS5__GPIO1_21
-121 MX35_PAD_NF_CE0__EMI_NANDF_CE0
-122 MX35_PAD_NF_CE0__GPIO1_22
-123 MX35_PAD_ECB__EMI_EIM_ECB
-124 MX35_PAD_LBA__EMI_EIM_LBA
-125 MX35_PAD_BCLK__EMI_EIM_BCLK
-126 MX35_PAD_RW__EMI_EIM_RW
-127 MX35_PAD_RAS__EMI_DRAM_RAS
-128 MX35_PAD_CAS__EMI_DRAM_CAS
-129 MX35_PAD_SDWE__EMI_DRAM_SDWE
-130 MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0
-131 MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1
-132 MX35_PAD_SDCLK__EMI_DRAM_SDCLK
-133 MX35_PAD_SDQS0__EMI_DRAM_SDQS_0
-134 MX35_PAD_SDQS1__EMI_DRAM_SDQS_1
-135 MX35_PAD_SDQS2__EMI_DRAM_SDQS_2
-136 MX35_PAD_SDQS3__EMI_DRAM_SDQS_3
-137 MX35_PAD_NFWE_B__EMI_NANDF_WE_B
-138 MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3
-139 MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC
-140 MX35_PAD_NFWE_B__GPIO2_18
-141 MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0
-142 MX35_PAD_NFRE_B__EMI_NANDF_RE_B
-143 MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR
-144 MX35_PAD_NFRE_B__IPU_DISPB_BCLK
-145 MX35_PAD_NFRE_B__GPIO2_19
-146 MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1
-147 MX35_PAD_NFALE__EMI_NANDF_ALE
-148 MX35_PAD_NFALE__USB_TOP_USBH2_STP
-149 MX35_PAD_NFALE__IPU_DISPB_CS0
-150 MX35_PAD_NFALE__GPIO2_20
-151 MX35_PAD_NFALE__ARM11P_TOP_TRACE_2
-152 MX35_PAD_NFCLE__EMI_NANDF_CLE
-153 MX35_PAD_NFCLE__USB_TOP_USBH2_NXT
-154 MX35_PAD_NFCLE__IPU_DISPB_PAR_RS
-155 MX35_PAD_NFCLE__GPIO2_21
-156 MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3
-157 MX35_PAD_NFWP_B__EMI_NANDF_WP_B
-158 MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7
-159 MX35_PAD_NFWP_B__IPU_DISPB_WR
-160 MX35_PAD_NFWP_B__GPIO2_22
-161 MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL
-162 MX35_PAD_NFRB__EMI_NANDF_RB
-163 MX35_PAD_NFRB__IPU_DISPB_RD
-164 MX35_PAD_NFRB__GPIO2_23
-165 MX35_PAD_NFRB__ARM11P_TOP_TRCLK
-166 MX35_PAD_D15__EMI_EIM_D_15
-167 MX35_PAD_D14__EMI_EIM_D_14
-168 MX35_PAD_D13__EMI_EIM_D_13
-169 MX35_PAD_D12__EMI_EIM_D_12
-170 MX35_PAD_D11__EMI_EIM_D_11
-171 MX35_PAD_D10__EMI_EIM_D_10
-172 MX35_PAD_D9__EMI_EIM_D_9
-173 MX35_PAD_D8__EMI_EIM_D_8
-174 MX35_PAD_D7__EMI_EIM_D_7
-175 MX35_PAD_D6__EMI_EIM_D_6
-176 MX35_PAD_D5__EMI_EIM_D_5
-177 MX35_PAD_D4__EMI_EIM_D_4
-178 MX35_PAD_D3__EMI_EIM_D_3
-179 MX35_PAD_D2__EMI_EIM_D_2
-180 MX35_PAD_D1__EMI_EIM_D_1
-181 MX35_PAD_D0__EMI_EIM_D_0
-182 MX35_PAD_CSI_D8__IPU_CSI_D_8
-183 MX35_PAD_CSI_D8__KPP_COL_0
-184 MX35_PAD_CSI_D8__GPIO1_20
-185 MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13
-186 MX35_PAD_CSI_D9__IPU_CSI_D_9
-187 MX35_PAD_CSI_D9__KPP_COL_1
-188 MX35_PAD_CSI_D9__GPIO1_21
-189 MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14
-190 MX35_PAD_CSI_D10__IPU_CSI_D_10
-191 MX35_PAD_CSI_D10__KPP_COL_2
-192 MX35_PAD_CSI_D10__GPIO1_22
-193 MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15
-194 MX35_PAD_CSI_D11__IPU_CSI_D_11
-195 MX35_PAD_CSI_D11__KPP_COL_3
-196 MX35_PAD_CSI_D11__GPIO1_23
-197 MX35_PAD_CSI_D12__IPU_CSI_D_12
-198 MX35_PAD_CSI_D12__KPP_ROW_0
-199 MX35_PAD_CSI_D12__GPIO1_24
-200 MX35_PAD_CSI_D13__IPU_CSI_D_13
-201 MX35_PAD_CSI_D13__KPP_ROW_1
-202 MX35_PAD_CSI_D13__GPIO1_25
-203 MX35_PAD_CSI_D14__IPU_CSI_D_14
-204 MX35_PAD_CSI_D14__KPP_ROW_2
-205 MX35_PAD_CSI_D14__GPIO1_26
-206 MX35_PAD_CSI_D15__IPU_CSI_D_15
-207 MX35_PAD_CSI_D15__KPP_ROW_3
-208 MX35_PAD_CSI_D15__GPIO1_27
-209 MX35_PAD_CSI_MCLK__IPU_CSI_MCLK
-210 MX35_PAD_CSI_MCLK__GPIO1_28
-211 MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC
-212 MX35_PAD_CSI_VSYNC__GPIO1_29
-213 MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC
-214 MX35_PAD_CSI_HSYNC__GPIO1_30
-215 MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK
-216 MX35_PAD_CSI_PIXCLK__GPIO1_31
-217 MX35_PAD_I2C1_CLK__I2C1_SCL
-218 MX35_PAD_I2C1_CLK__GPIO2_24
-219 MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK
-220 MX35_PAD_I2C1_DAT__I2C1_SDA
-221 MX35_PAD_I2C1_DAT__GPIO2_25
-222 MX35_PAD_I2C2_CLK__I2C2_SCL
-223 MX35_PAD_I2C2_CLK__CAN1_TXCAN
-224 MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR
-225 MX35_PAD_I2C2_CLK__GPIO2_26
-226 MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2
-227 MX35_PAD_I2C2_DAT__I2C2_SDA
-228 MX35_PAD_I2C2_DAT__CAN1_RXCAN
-229 MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC
-230 MX35_PAD_I2C2_DAT__GPIO2_27
-231 MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3
-232 MX35_PAD_STXD4__AUDMUX_AUD4_TXD
-233 MX35_PAD_STXD4__GPIO2_28
-234 MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0
-235 MX35_PAD_SRXD4__AUDMUX_AUD4_RXD
-236 MX35_PAD_SRXD4__GPIO2_29
-237 MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1
-238 MX35_PAD_SCK4__AUDMUX_AUD4_TXC
-239 MX35_PAD_SCK4__GPIO2_30
-240 MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2
-241 MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS
-242 MX35_PAD_STXFS4__GPIO2_31
-243 MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3
-244 MX35_PAD_STXD5__AUDMUX_AUD5_TXD
-245 MX35_PAD_STXD5__SPDIF_SPDIF_OUT1
-246 MX35_PAD_STXD5__CSPI2_MOSI
-247 MX35_PAD_STXD5__GPIO1_0
-248 MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4
-249 MX35_PAD_SRXD5__AUDMUX_AUD5_RXD
-250 MX35_PAD_SRXD5__SPDIF_SPDIF_IN1
-251 MX35_PAD_SRXD5__CSPI2_MISO
-252 MX35_PAD_SRXD5__GPIO1_1
-253 MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5
-254 MX35_PAD_SCK5__AUDMUX_AUD5_TXC
-255 MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK
-256 MX35_PAD_SCK5__CSPI2_SCLK
-257 MX35_PAD_SCK5__GPIO1_2
-258 MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6
-259 MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS
-260 MX35_PAD_STXFS5__CSPI2_RDY
-261 MX35_PAD_STXFS5__GPIO1_3
-262 MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7
-263 MX35_PAD_SCKR__ESAI_SCKR
-264 MX35_PAD_SCKR__GPIO1_4
-265 MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10
-266 MX35_PAD_FSR__ESAI_FSR
-267 MX35_PAD_FSR__GPIO1_5
-268 MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11
-269 MX35_PAD_HCKR__ESAI_HCKR
-270 MX35_PAD_HCKR__AUDMUX_AUD5_RXFS
-271 MX35_PAD_HCKR__CSPI2_SS0
-272 MX35_PAD_HCKR__IPU_FLASH_STROBE
-273 MX35_PAD_HCKR__GPIO1_6
-274 MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12
-275 MX35_PAD_SCKT__ESAI_SCKT
-276 MX35_PAD_SCKT__GPIO1_7
-277 MX35_PAD_SCKT__IPU_CSI_D_0
-278 MX35_PAD_SCKT__KPP_ROW_2
-279 MX35_PAD_FST__ESAI_FST
-280 MX35_PAD_FST__GPIO1_8
-281 MX35_PAD_FST__IPU_CSI_D_1
-282 MX35_PAD_FST__KPP_ROW_3
-283 MX35_PAD_HCKT__ESAI_HCKT
-284 MX35_PAD_HCKT__AUDMUX_AUD5_RXC
-285 MX35_PAD_HCKT__GPIO1_9
-286 MX35_PAD_HCKT__IPU_CSI_D_2
-287 MX35_PAD_HCKT__KPP_COL_3
-288 MX35_PAD_TX5_RX0__ESAI_TX5_RX0
-289 MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC
-290 MX35_PAD_TX5_RX0__CSPI2_SS2
-291 MX35_PAD_TX5_RX0__CAN2_TXCAN
-292 MX35_PAD_TX5_RX0__UART2_DTR
-293 MX35_PAD_TX5_RX0__GPIO1_10
-294 MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0
-295 MX35_PAD_TX4_RX1__ESAI_TX4_RX1
-296 MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS
-297 MX35_PAD_TX4_RX1__CSPI2_SS3
-298 MX35_PAD_TX4_RX1__CAN2_RXCAN
-299 MX35_PAD_TX4_RX1__UART2_DSR
-300 MX35_PAD_TX4_RX1__GPIO1_11
-301 MX35_PAD_TX4_RX1__IPU_CSI_D_3
-302 MX35_PAD_TX4_RX1__KPP_ROW_0
-303 MX35_PAD_TX3_RX2__ESAI_TX3_RX2
-304 MX35_PAD_TX3_RX2__I2C3_SCL
-305 MX35_PAD_TX3_RX2__EMI_NANDF_CE1
-306 MX35_PAD_TX3_RX2__GPIO1_12
-307 MX35_PAD_TX3_RX2__IPU_CSI_D_4
-308 MX35_PAD_TX3_RX2__KPP_ROW_1
-309 MX35_PAD_TX2_RX3__ESAI_TX2_RX3
-310 MX35_PAD_TX2_RX3__I2C3_SDA
-311 MX35_PAD_TX2_RX3__EMI_NANDF_CE2
-312 MX35_PAD_TX2_RX3__GPIO1_13
-313 MX35_PAD_TX2_RX3__IPU_CSI_D_5
-314 MX35_PAD_TX2_RX3__KPP_COL_0
-315 MX35_PAD_TX1__ESAI_TX1
-316 MX35_PAD_TX1__CCM_PMIC_RDY
-317 MX35_PAD_TX1__CSPI1_SS2
-318 MX35_PAD_TX1__EMI_NANDF_CE3
-319 MX35_PAD_TX1__UART2_RI
-320 MX35_PAD_TX1__GPIO1_14
-321 MX35_PAD_TX1__IPU_CSI_D_6
-322 MX35_PAD_TX1__KPP_COL_1
-323 MX35_PAD_TX0__ESAI_TX0
-324 MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK
-325 MX35_PAD_TX0__CSPI1_SS3
-326 MX35_PAD_TX0__EMI_DTACK_B
-327 MX35_PAD_TX0__UART2_DCD
-328 MX35_PAD_TX0__GPIO1_15
-329 MX35_PAD_TX0__IPU_CSI_D_7
-330 MX35_PAD_TX0__KPP_COL_2
-331 MX35_PAD_CSPI1_MOSI__CSPI1_MOSI
-332 MX35_PAD_CSPI1_MOSI__GPIO1_16
-333 MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2
-334 MX35_PAD_CSPI1_MISO__CSPI1_MISO
-335 MX35_PAD_CSPI1_MISO__GPIO1_17
-336 MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3
-337 MX35_PAD_CSPI1_SS0__CSPI1_SS0
-338 MX35_PAD_CSPI1_SS0__OWIRE_LINE
-339 MX35_PAD_CSPI1_SS0__CSPI2_SS3
-340 MX35_PAD_CSPI1_SS0__GPIO1_18
-341 MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4
-342 MX35_PAD_CSPI1_SS1__CSPI1_SS1
-343 MX35_PAD_CSPI1_SS1__PWM_PWMO
-344 MX35_PAD_CSPI1_SS1__CCM_CLK32K
-345 MX35_PAD_CSPI1_SS1__GPIO1_19
-346 MX35_PAD_CSPI1_SS1__IPU_DIAGB_29
-347 MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5
-348 MX35_PAD_CSPI1_SCLK__CSPI1_SCLK
-349 MX35_PAD_CSPI1_SCLK__GPIO3_4
-350 MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30
-351 MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1
-352 MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY
-353 MX35_PAD_CSPI1_SPI_RDY__GPIO3_5
-354 MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31
-355 MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2
-356 MX35_PAD_RXD1__UART1_RXD_MUX
-357 MX35_PAD_RXD1__CSPI2_MOSI
-358 MX35_PAD_RXD1__KPP_COL_4
-359 MX35_PAD_RXD1__GPIO3_6
-360 MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16
-361 MX35_PAD_TXD1__UART1_TXD_MUX
-362 MX35_PAD_TXD1__CSPI2_MISO
-363 MX35_PAD_TXD1__KPP_COL_5
-364 MX35_PAD_TXD1__GPIO3_7
-365 MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17
-366 MX35_PAD_RTS1__UART1_RTS
-367 MX35_PAD_RTS1__CSPI2_SCLK
-368 MX35_PAD_RTS1__I2C3_SCL
-369 MX35_PAD_RTS1__IPU_CSI_D_0
-370 MX35_PAD_RTS1__KPP_COL_6
-371 MX35_PAD_RTS1__GPIO3_8
-372 MX35_PAD_RTS1__EMI_NANDF_CE1
-373 MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18
-374 MX35_PAD_CTS1__UART1_CTS
-375 MX35_PAD_CTS1__CSPI2_RDY
-376 MX35_PAD_CTS1__I2C3_SDA
-377 MX35_PAD_CTS1__IPU_CSI_D_1
-378 MX35_PAD_CTS1__KPP_COL_7
-379 MX35_PAD_CTS1__GPIO3_9
-380 MX35_PAD_CTS1__EMI_NANDF_CE2
-381 MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19
-382 MX35_PAD_RXD2__UART2_RXD_MUX
-383 MX35_PAD_RXD2__KPP_ROW_4
-384 MX35_PAD_RXD2__GPIO3_10
-385 MX35_PAD_TXD2__UART2_TXD_MUX
-386 MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK
-387 MX35_PAD_TXD2__KPP_ROW_5
-388 MX35_PAD_TXD2__GPIO3_11
-389 MX35_PAD_RTS2__UART2_RTS
-390 MX35_PAD_RTS2__SPDIF_SPDIF_IN1
-391 MX35_PAD_RTS2__CAN2_RXCAN
-392 MX35_PAD_RTS2__IPU_CSI_D_2
-393 MX35_PAD_RTS2__KPP_ROW_6
-394 MX35_PAD_RTS2__GPIO3_12
-395 MX35_PAD_RTS2__AUDMUX_AUD5_RXC
-396 MX35_PAD_RTS2__UART3_RXD_MUX
-397 MX35_PAD_CTS2__UART2_CTS
-398 MX35_PAD_CTS2__SPDIF_SPDIF_OUT1
-399 MX35_PAD_CTS2__CAN2_TXCAN
-400 MX35_PAD_CTS2__IPU_CSI_D_3
-401 MX35_PAD_CTS2__KPP_ROW_7
-402 MX35_PAD_CTS2__GPIO3_13
-403 MX35_PAD_CTS2__AUDMUX_AUD5_RXFS
-404 MX35_PAD_CTS2__UART3_TXD_MUX
-405 MX35_PAD_RTCK__ARM11P_TOP_RTCK
-406 MX35_PAD_TCK__SJC_TCK
-407 MX35_PAD_TMS__SJC_TMS
-408 MX35_PAD_TDI__SJC_TDI
-409 MX35_PAD_TDO__SJC_TDO
-410 MX35_PAD_TRSTB__SJC_TRSTB
-411 MX35_PAD_DE_B__SJC_DE_B
-412 MX35_PAD_SJC_MOD__SJC_MOD
-413 MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR
-414 MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR
-415 MX35_PAD_USBOTG_PWR__GPIO3_14
-416 MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC
-417 MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC
-418 MX35_PAD_USBOTG_OC__GPIO3_15
-419 MX35_PAD_LD0__IPU_DISPB_DAT_0
-420 MX35_PAD_LD0__GPIO2_0
-421 MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0
-422 MX35_PAD_LD1__IPU_DISPB_DAT_1
-423 MX35_PAD_LD1__GPIO2_1
-424 MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1
-425 MX35_PAD_LD2__IPU_DISPB_DAT_2
-426 MX35_PAD_LD2__GPIO2_2
-427 MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2
-428 MX35_PAD_LD3__IPU_DISPB_DAT_3
-429 MX35_PAD_LD3__GPIO2_3
-430 MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3
-431 MX35_PAD_LD4__IPU_DISPB_DAT_4
-432 MX35_PAD_LD4__GPIO2_4
-433 MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4
-434 MX35_PAD_LD5__IPU_DISPB_DAT_5
-435 MX35_PAD_LD5__GPIO2_5
-436 MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5
-437 MX35_PAD_LD6__IPU_DISPB_DAT_6
-438 MX35_PAD_LD6__GPIO2_6
-439 MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6
-440 MX35_PAD_LD7__IPU_DISPB_DAT_7
-441 MX35_PAD_LD7__GPIO2_7
-442 MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7
-443 MX35_PAD_LD8__IPU_DISPB_DAT_8
-444 MX35_PAD_LD8__GPIO2_8
-445 MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8
-446 MX35_PAD_LD9__IPU_DISPB_DAT_9
-447 MX35_PAD_LD9__GPIO2_9
-448 MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9
-449 MX35_PAD_LD10__IPU_DISPB_DAT_10
-450 MX35_PAD_LD10__GPIO2_10
-451 MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10
-452 MX35_PAD_LD11__IPU_DISPB_DAT_11
-453 MX35_PAD_LD11__GPIO2_11
-454 MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11
-455 MX35_PAD_LD11__ARM11P_TOP_TRACE_4
-456 MX35_PAD_LD12__IPU_DISPB_DAT_12
-457 MX35_PAD_LD12__GPIO2_12
-458 MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12
-459 MX35_PAD_LD12__ARM11P_TOP_TRACE_5
-460 MX35_PAD_LD13__IPU_DISPB_DAT_13
-461 MX35_PAD_LD13__GPIO2_13
-462 MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13
-463 MX35_PAD_LD13__ARM11P_TOP_TRACE_6
-464 MX35_PAD_LD14__IPU_DISPB_DAT_14
-465 MX35_PAD_LD14__GPIO2_14
-466 MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0
-467 MX35_PAD_LD14__ARM11P_TOP_TRACE_7
-468 MX35_PAD_LD15__IPU_DISPB_DAT_15
-469 MX35_PAD_LD15__GPIO2_15
-470 MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1
-471 MX35_PAD_LD15__ARM11P_TOP_TRACE_8
-472 MX35_PAD_LD16__IPU_DISPB_DAT_16
-473 MX35_PAD_LD16__IPU_DISPB_D12_VSYNC
-474 MX35_PAD_LD16__GPIO2_16
-475 MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2
-476 MX35_PAD_LD16__ARM11P_TOP_TRACE_9
-477 MX35_PAD_LD17__IPU_DISPB_DAT_17
-478 MX35_PAD_LD17__IPU_DISPB_CS2
-479 MX35_PAD_LD17__GPIO2_17
-480 MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3
-481 MX35_PAD_LD17__ARM11P_TOP_TRACE_10
-482 MX35_PAD_LD18__IPU_DISPB_DAT_18
-483 MX35_PAD_LD18__IPU_DISPB_D0_VSYNC
-484 MX35_PAD_LD18__IPU_DISPB_D12_VSYNC
-485 MX35_PAD_LD18__ESDHC3_CMD
-486 MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3
-487 MX35_PAD_LD18__GPIO3_24
-488 MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4
-489 MX35_PAD_LD18__ARM11P_TOP_TRACE_11
-490 MX35_PAD_LD19__IPU_DISPB_DAT_19
-491 MX35_PAD_LD19__IPU_DISPB_BCLK
-492 MX35_PAD_LD19__IPU_DISPB_CS1
-493 MX35_PAD_LD19__ESDHC3_CLK
-494 MX35_PAD_LD19__USB_TOP_USBOTG_DIR
-495 MX35_PAD_LD19__GPIO3_25
-496 MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5
-497 MX35_PAD_LD19__ARM11P_TOP_TRACE_12
-498 MX35_PAD_LD20__IPU_DISPB_DAT_20
-499 MX35_PAD_LD20__IPU_DISPB_CS0
-500 MX35_PAD_LD20__IPU_DISPB_SD_CLK
-501 MX35_PAD_LD20__ESDHC3_DAT0
-502 MX35_PAD_LD20__GPIO3_26
-503 MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3
-504 MX35_PAD_LD20__ARM11P_TOP_TRACE_13
-505 MX35_PAD_LD21__IPU_DISPB_DAT_21
-506 MX35_PAD_LD21__IPU_DISPB_PAR_RS
-507 MX35_PAD_LD21__IPU_DISPB_SER_RS
-508 MX35_PAD_LD21__ESDHC3_DAT1
-509 MX35_PAD_LD21__USB_TOP_USBOTG_STP
-510 MX35_PAD_LD21__GPIO3_27
-511 MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL
-512 MX35_PAD_LD21__ARM11P_TOP_TRACE_14
-513 MX35_PAD_LD22__IPU_DISPB_DAT_22
-514 MX35_PAD_LD22__IPU_DISPB_WR
-515 MX35_PAD_LD22__IPU_DISPB_SD_D_I
-516 MX35_PAD_LD22__ESDHC3_DAT2
-517 MX35_PAD_LD22__USB_TOP_USBOTG_NXT
-518 MX35_PAD_LD22__GPIO3_28
-519 MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR
-520 MX35_PAD_LD22__ARM11P_TOP_TRCTL
-521 MX35_PAD_LD23__IPU_DISPB_DAT_23
-522 MX35_PAD_LD23__IPU_DISPB_RD
-523 MX35_PAD_LD23__IPU_DISPB_SD_D_IO
-524 MX35_PAD_LD23__ESDHC3_DAT3
-525 MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7
-526 MX35_PAD_LD23__GPIO3_29
-527 MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS
-528 MX35_PAD_LD23__ARM11P_TOP_TRCLK
-529 MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC
-530 MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO
-531 MX35_PAD_D3_HSYNC__GPIO3_30
-532 MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE
-533 MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15
-534 MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK
-535 MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK
-536 MX35_PAD_D3_FPSHIFT__GPIO3_31
-537 MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0
-538 MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16
-539 MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY
-540 MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O
-541 MX35_PAD_D3_DRDY__GPIO1_0
-542 MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1
-543 MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17
-544 MX35_PAD_CONTRAST__IPU_DISPB_CONTR
-545 MX35_PAD_CONTRAST__GPIO1_1
-546 MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2
-547 MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18
-548 MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC
-549 MX35_PAD_D3_VSYNC__IPU_DISPB_CS1
-550 MX35_PAD_D3_VSYNC__GPIO1_2
-551 MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD
-552 MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19
-553 MX35_PAD_D3_REV__IPU_DISPB_D3_REV
-554 MX35_PAD_D3_REV__IPU_DISPB_SER_RS
-555 MX35_PAD_D3_REV__GPIO1_3
-556 MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB
-557 MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20
-558 MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS
-559 MX35_PAD_D3_CLS__IPU_DISPB_CS2
-560 MX35_PAD_D3_CLS__GPIO1_4
-561 MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0
-562 MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21
-563 MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL
-564 MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC
-565 MX35_PAD_D3_SPL__GPIO1_5
-566 MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1
-567 MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22
-568 MX35_PAD_SD1_CMD__ESDHC1_CMD
-569 MX35_PAD_SD1_CMD__MSHC_SCLK
-570 MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC
-571 MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4
-572 MX35_PAD_SD1_CMD__GPIO1_6
-573 MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL
-574 MX35_PAD_SD1_CLK__ESDHC1_CLK
-575 MX35_PAD_SD1_CLK__MSHC_BS
-576 MX35_PAD_SD1_CLK__IPU_DISPB_BCLK
-577 MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5
-578 MX35_PAD_SD1_CLK__GPIO1_7
-579 MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK
-580 MX35_PAD_SD1_DATA0__ESDHC1_DAT0
-581 MX35_PAD_SD1_DATA0__MSHC_DATA_0
-582 MX35_PAD_SD1_DATA0__IPU_DISPB_CS0
-583 MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6
-584 MX35_PAD_SD1_DATA0__GPIO1_8
-585 MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23
-586 MX35_PAD_SD1_DATA1__ESDHC1_DAT1
-587 MX35_PAD_SD1_DATA1__MSHC_DATA_1
-588 MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS
-589 MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0
-590 MX35_PAD_SD1_DATA1__GPIO1_9
-591 MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24
-592 MX35_PAD_SD1_DATA2__ESDHC1_DAT2
-593 MX35_PAD_SD1_DATA2__MSHC_DATA_2
-594 MX35_PAD_SD1_DATA2__IPU_DISPB_WR
-595 MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1
-596 MX35_PAD_SD1_DATA2__GPIO1_10
-597 MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25
-598 MX35_PAD_SD1_DATA3__ESDHC1_DAT3
-599 MX35_PAD_SD1_DATA3__MSHC_DATA_3
-600 MX35_PAD_SD1_DATA3__IPU_DISPB_RD
-601 MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2
-602 MX35_PAD_SD1_DATA3__GPIO1_11
-603 MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26
-604 MX35_PAD_SD2_CMD__ESDHC2_CMD
-605 MX35_PAD_SD2_CMD__I2C3_SCL
-606 MX35_PAD_SD2_CMD__ESDHC1_DAT4
-607 MX35_PAD_SD2_CMD__IPU_CSI_D_2
-608 MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4
-609 MX35_PAD_SD2_CMD__GPIO2_0
-610 MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1
-611 MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC
-612 MX35_PAD_SD2_CLK__ESDHC2_CLK
-613 MX35_PAD_SD2_CLK__I2C3_SDA
-614 MX35_PAD_SD2_CLK__ESDHC1_DAT5
-615 MX35_PAD_SD2_CLK__IPU_CSI_D_3
-616 MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5
-617 MX35_PAD_SD2_CLK__GPIO2_1
-618 MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1
-619 MX35_PAD_SD2_CLK__IPU_DISPB_CS2
-620 MX35_PAD_SD2_DATA0__ESDHC2_DAT0
-621 MX35_PAD_SD2_DATA0__UART3_RXD_MUX
-622 MX35_PAD_SD2_DATA0__ESDHC1_DAT6
-623 MX35_PAD_SD2_DATA0__IPU_CSI_D_4
-624 MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6
-625 MX35_PAD_SD2_DATA0__GPIO2_2
-626 MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK
-627 MX35_PAD_SD2_DATA1__ESDHC2_DAT1
-628 MX35_PAD_SD2_DATA1__UART3_TXD_MUX
-629 MX35_PAD_SD2_DATA1__ESDHC1_DAT7
-630 MX35_PAD_SD2_DATA1__IPU_CSI_D_5
-631 MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0
-632 MX35_PAD_SD2_DATA1__GPIO2_3
-633 MX35_PAD_SD2_DATA2__ESDHC2_DAT2
-634 MX35_PAD_SD2_DATA2__UART3_RTS
-635 MX35_PAD_SD2_DATA2__CAN1_RXCAN
-636 MX35_PAD_SD2_DATA2__IPU_CSI_D_6
-637 MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1
-638 MX35_PAD_SD2_DATA2__GPIO2_4
-639 MX35_PAD_SD2_DATA3__ESDHC2_DAT3
-640 MX35_PAD_SD2_DATA3__UART3_CTS
-641 MX35_PAD_SD2_DATA3__CAN1_TXCAN
-642 MX35_PAD_SD2_DATA3__IPU_CSI_D_7
-643 MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2
-644 MX35_PAD_SD2_DATA3__GPIO2_5
-645 MX35_PAD_ATA_CS0__ATA_CS0
-646 MX35_PAD_ATA_CS0__CSPI1_SS3
-647 MX35_PAD_ATA_CS0__IPU_DISPB_CS1
-648 MX35_PAD_ATA_CS0__GPIO2_6
-649 MX35_PAD_ATA_CS0__IPU_DIAGB_0
-650 MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0
-651 MX35_PAD_ATA_CS1__ATA_CS1
-652 MX35_PAD_ATA_CS1__IPU_DISPB_CS2
-653 MX35_PAD_ATA_CS1__CSPI2_SS0
-654 MX35_PAD_ATA_CS1__GPIO2_7
-655 MX35_PAD_ATA_CS1__IPU_DIAGB_1
-656 MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1
-657 MX35_PAD_ATA_DIOR__ATA_DIOR
-658 MX35_PAD_ATA_DIOR__ESDHC3_DAT0
-659 MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR
-660 MX35_PAD_ATA_DIOR__IPU_DISPB_BE0
-661 MX35_PAD_ATA_DIOR__CSPI2_SS1
-662 MX35_PAD_ATA_DIOR__GPIO2_8
-663 MX35_PAD_ATA_DIOR__IPU_DIAGB_2
-664 MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2
-665 MX35_PAD_ATA_DIOW__ATA_DIOW
-666 MX35_PAD_ATA_DIOW__ESDHC3_DAT1
-667 MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP
-668 MX35_PAD_ATA_DIOW__IPU_DISPB_BE1
-669 MX35_PAD_ATA_DIOW__CSPI2_MOSI
-670 MX35_PAD_ATA_DIOW__GPIO2_9
-671 MX35_PAD_ATA_DIOW__IPU_DIAGB_3
-672 MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3
-673 MX35_PAD_ATA_DMACK__ATA_DMACK
-674 MX35_PAD_ATA_DMACK__ESDHC3_DAT2
-675 MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT
-676 MX35_PAD_ATA_DMACK__CSPI2_MISO
-677 MX35_PAD_ATA_DMACK__GPIO2_10
-678 MX35_PAD_ATA_DMACK__IPU_DIAGB_4
-679 MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0
-680 MX35_PAD_ATA_RESET_B__ATA_RESET_B
-681 MX35_PAD_ATA_RESET_B__ESDHC3_DAT3
-682 MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0
-683 MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O
-684 MX35_PAD_ATA_RESET_B__CSPI2_RDY
-685 MX35_PAD_ATA_RESET_B__GPIO2_11
-686 MX35_PAD_ATA_RESET_B__IPU_DIAGB_5
-687 MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1
-688 MX35_PAD_ATA_IORDY__ATA_IORDY
-689 MX35_PAD_ATA_IORDY__ESDHC3_DAT4
-690 MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1
-691 MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO
-692 MX35_PAD_ATA_IORDY__ESDHC2_DAT4
-693 MX35_PAD_ATA_IORDY__GPIO2_12
-694 MX35_PAD_ATA_IORDY__IPU_DIAGB_6
-695 MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2
-696 MX35_PAD_ATA_DATA0__ATA_DATA_0
-697 MX35_PAD_ATA_DATA0__ESDHC3_DAT5
-698 MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2
-699 MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC
-700 MX35_PAD_ATA_DATA0__ESDHC2_DAT5
-701 MX35_PAD_ATA_DATA0__GPIO2_13
-702 MX35_PAD_ATA_DATA0__IPU_DIAGB_7
-703 MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3
-704 MX35_PAD_ATA_DATA1__ATA_DATA_1
-705 MX35_PAD_ATA_DATA1__ESDHC3_DAT6
-706 MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3
-707 MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK
-708 MX35_PAD_ATA_DATA1__ESDHC2_DAT6
-709 MX35_PAD_ATA_DATA1__GPIO2_14
-710 MX35_PAD_ATA_DATA1__IPU_DIAGB_8
-711 MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27
-712 MX35_PAD_ATA_DATA2__ATA_DATA_2
-713 MX35_PAD_ATA_DATA2__ESDHC3_DAT7
-714 MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4
-715 MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS
-716 MX35_PAD_ATA_DATA2__ESDHC2_DAT7
-717 MX35_PAD_ATA_DATA2__GPIO2_15
-718 MX35_PAD_ATA_DATA2__IPU_DIAGB_9
-719 MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28
-720 MX35_PAD_ATA_DATA3__ATA_DATA_3
-721 MX35_PAD_ATA_DATA3__ESDHC3_CLK
-722 MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5
-723 MX35_PAD_ATA_DATA3__CSPI2_SCLK
-724 MX35_PAD_ATA_DATA3__GPIO2_16
-725 MX35_PAD_ATA_DATA3__IPU_DIAGB_10
-726 MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29
-727 MX35_PAD_ATA_DATA4__ATA_DATA_4
-728 MX35_PAD_ATA_DATA4__ESDHC3_CMD
-729 MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6
-730 MX35_PAD_ATA_DATA4__GPIO2_17
-731 MX35_PAD_ATA_DATA4__IPU_DIAGB_11
-732 MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30
-733 MX35_PAD_ATA_DATA5__ATA_DATA_5
-734 MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7
-735 MX35_PAD_ATA_DATA5__GPIO2_18
-736 MX35_PAD_ATA_DATA5__IPU_DIAGB_12
-737 MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31
-738 MX35_PAD_ATA_DATA6__ATA_DATA_6
-739 MX35_PAD_ATA_DATA6__CAN1_TXCAN
-740 MX35_PAD_ATA_DATA6__UART1_DTR
-741 MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD
-742 MX35_PAD_ATA_DATA6__GPIO2_19
-743 MX35_PAD_ATA_DATA6__IPU_DIAGB_13
-744 MX35_PAD_ATA_DATA7__ATA_DATA_7
-745 MX35_PAD_ATA_DATA7__CAN1_RXCAN
-746 MX35_PAD_ATA_DATA7__UART1_DSR
-747 MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD
-748 MX35_PAD_ATA_DATA7__GPIO2_20
-749 MX35_PAD_ATA_DATA7__IPU_DIAGB_14
-750 MX35_PAD_ATA_DATA8__ATA_DATA_8
-751 MX35_PAD_ATA_DATA8__UART3_RTS
-752 MX35_PAD_ATA_DATA8__UART1_RI
-753 MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC
-754 MX35_PAD_ATA_DATA8__GPIO2_21
-755 MX35_PAD_ATA_DATA8__IPU_DIAGB_15
-756 MX35_PAD_ATA_DATA9__ATA_DATA_9
-757 MX35_PAD_ATA_DATA9__UART3_CTS
-758 MX35_PAD_ATA_DATA9__UART1_DCD
-759 MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS
-760 MX35_PAD_ATA_DATA9__GPIO2_22
-761 MX35_PAD_ATA_DATA9__IPU_DIAGB_16
-762 MX35_PAD_ATA_DATA10__ATA_DATA_10
-763 MX35_PAD_ATA_DATA10__UART3_RXD_MUX
-764 MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC
-765 MX35_PAD_ATA_DATA10__GPIO2_23
-766 MX35_PAD_ATA_DATA10__IPU_DIAGB_17
-767 MX35_PAD_ATA_DATA11__ATA_DATA_11
-768 MX35_PAD_ATA_DATA11__UART3_TXD_MUX
-769 MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS
-770 MX35_PAD_ATA_DATA11__GPIO2_24
-771 MX35_PAD_ATA_DATA11__IPU_DIAGB_18
-772 MX35_PAD_ATA_DATA12__ATA_DATA_12
-773 MX35_PAD_ATA_DATA12__I2C3_SCL
-774 MX35_PAD_ATA_DATA12__GPIO2_25
-775 MX35_PAD_ATA_DATA12__IPU_DIAGB_19
-776 MX35_PAD_ATA_DATA13__ATA_DATA_13
-777 MX35_PAD_ATA_DATA13__I2C3_SDA
-778 MX35_PAD_ATA_DATA13__GPIO2_26
-779 MX35_PAD_ATA_DATA13__IPU_DIAGB_20
-780 MX35_PAD_ATA_DATA14__ATA_DATA_14
-781 MX35_PAD_ATA_DATA14__IPU_CSI_D_0
-782 MX35_PAD_ATA_DATA14__KPP_ROW_0
-783 MX35_PAD_ATA_DATA14__GPIO2_27
-784 MX35_PAD_ATA_DATA14__IPU_DIAGB_21
-785 MX35_PAD_ATA_DATA15__ATA_DATA_15
-786 MX35_PAD_ATA_DATA15__IPU_CSI_D_1
-787 MX35_PAD_ATA_DATA15__KPP_ROW_1
-788 MX35_PAD_ATA_DATA15__GPIO2_28
-789 MX35_PAD_ATA_DATA15__IPU_DIAGB_22
-790 MX35_PAD_ATA_INTRQ__ATA_INTRQ
-791 MX35_PAD_ATA_INTRQ__IPU_CSI_D_2
-792 MX35_PAD_ATA_INTRQ__KPP_ROW_2
-793 MX35_PAD_ATA_INTRQ__GPIO2_29
-794 MX35_PAD_ATA_INTRQ__IPU_DIAGB_23
-795 MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN
-796 MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3
-797 MX35_PAD_ATA_BUFF_EN__KPP_ROW_3
-798 MX35_PAD_ATA_BUFF_EN__GPIO2_30
-799 MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24
-800 MX35_PAD_ATA_DMARQ__ATA_DMARQ
-801 MX35_PAD_ATA_DMARQ__IPU_CSI_D_4
-802 MX35_PAD_ATA_DMARQ__KPP_COL_0
-803 MX35_PAD_ATA_DMARQ__GPIO2_31
-804 MX35_PAD_ATA_DMARQ__IPU_DIAGB_25
-805 MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4
-806 MX35_PAD_ATA_DA0__ATA_DA_0
-807 MX35_PAD_ATA_DA0__IPU_CSI_D_5
-808 MX35_PAD_ATA_DA0__KPP_COL_1
-809 MX35_PAD_ATA_DA0__GPIO3_0
-810 MX35_PAD_ATA_DA0__IPU_DIAGB_26
-811 MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5
-812 MX35_PAD_ATA_DA1__ATA_DA_1
-813 MX35_PAD_ATA_DA1__IPU_CSI_D_6
-814 MX35_PAD_ATA_DA1__KPP_COL_2
-815 MX35_PAD_ATA_DA1__GPIO3_1
-816 MX35_PAD_ATA_DA1__IPU_DIAGB_27
-817 MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6
-818 MX35_PAD_ATA_DA2__ATA_DA_2
-819 MX35_PAD_ATA_DA2__IPU_CSI_D_7
-820 MX35_PAD_ATA_DA2__KPP_COL_3
-821 MX35_PAD_ATA_DA2__GPIO3_2
-822 MX35_PAD_ATA_DA2__IPU_DIAGB_28
-823 MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7
-824 MX35_PAD_MLB_CLK__MLB_MLBCLK
-825 MX35_PAD_MLB_CLK__GPIO3_3
-826 MX35_PAD_MLB_DAT__MLB_MLBDAT
-827 MX35_PAD_MLB_DAT__GPIO3_4
-828 MX35_PAD_MLB_SIG__MLB_MLBSIG
-829 MX35_PAD_MLB_SIG__GPIO3_5
-830 MX35_PAD_FEC_TX_CLK__FEC_TX_CLK
-831 MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4
-832 MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX
-833 MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR
-834 MX35_PAD_FEC_TX_CLK__CSPI2_MOSI
-835 MX35_PAD_FEC_TX_CLK__GPIO3_6
-836 MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC
-837 MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0
-838 MX35_PAD_FEC_RX_CLK__FEC_RX_CLK
-839 MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5
-840 MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX
-841 MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP
-842 MX35_PAD_FEC_RX_CLK__CSPI2_MISO
-843 MX35_PAD_FEC_RX_CLK__GPIO3_7
-844 MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I
-845 MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1
-846 MX35_PAD_FEC_RX_DV__FEC_RX_DV
-847 MX35_PAD_FEC_RX_DV__ESDHC1_DAT6
-848 MX35_PAD_FEC_RX_DV__UART3_RTS
-849 MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT
-850 MX35_PAD_FEC_RX_DV__CSPI2_SCLK
-851 MX35_PAD_FEC_RX_DV__GPIO3_8
-852 MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK
-853 MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2
-854 MX35_PAD_FEC_COL__FEC_COL
-855 MX35_PAD_FEC_COL__ESDHC1_DAT7
-856 MX35_PAD_FEC_COL__UART3_CTS
-857 MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0
-858 MX35_PAD_FEC_COL__CSPI2_RDY
-859 MX35_PAD_FEC_COL__GPIO3_9
-860 MX35_PAD_FEC_COL__IPU_DISPB_SER_RS
-861 MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3
-862 MX35_PAD_FEC_RDATA0__FEC_RDATA_0
-863 MX35_PAD_FEC_RDATA0__PWM_PWMO
-864 MX35_PAD_FEC_RDATA0__UART3_DTR
-865 MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1
-866 MX35_PAD_FEC_RDATA0__CSPI2_SS0
-867 MX35_PAD_FEC_RDATA0__GPIO3_10
-868 MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1
-869 MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4
-870 MX35_PAD_FEC_TDATA0__FEC_TDATA_0
-871 MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1
-872 MX35_PAD_FEC_TDATA0__UART3_DSR
-873 MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2
-874 MX35_PAD_FEC_TDATA0__CSPI2_SS1
-875 MX35_PAD_FEC_TDATA0__GPIO3_11
-876 MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0
-877 MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5
-878 MX35_PAD_FEC_TX_EN__FEC_TX_EN
-879 MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1
-880 MX35_PAD_FEC_TX_EN__UART3_RI
-881 MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3
-882 MX35_PAD_FEC_TX_EN__GPIO3_12
-883 MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS
-884 MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6
-885 MX35_PAD_FEC_MDC__FEC_MDC
-886 MX35_PAD_FEC_MDC__CAN2_TXCAN
-887 MX35_PAD_FEC_MDC__UART3_DCD
-888 MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4
-889 MX35_PAD_FEC_MDC__GPIO3_13
-890 MX35_PAD_FEC_MDC__IPU_DISPB_WR
-891 MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7
-892 MX35_PAD_FEC_MDIO__FEC_MDIO
-893 MX35_PAD_FEC_MDIO__CAN2_RXCAN
-894 MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5
-895 MX35_PAD_FEC_MDIO__GPIO3_14
-896 MX35_PAD_FEC_MDIO__IPU_DISPB_RD
-897 MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8
-898 MX35_PAD_FEC_TX_ERR__FEC_TX_ERR
-899 MX35_PAD_FEC_TX_ERR__OWIRE_LINE
-900 MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK
-901 MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6
-902 MX35_PAD_FEC_TX_ERR__GPIO3_15
-903 MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC
-904 MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9
-905 MX35_PAD_FEC_RX_ERR__FEC_RX_ERR
-906 MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0
-907 MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7
-908 MX35_PAD_FEC_RX_ERR__KPP_COL_4
-909 MX35_PAD_FEC_RX_ERR__GPIO3_16
-910 MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO
-911 MX35_PAD_FEC_CRS__FEC_CRS
-912 MX35_PAD_FEC_CRS__IPU_CSI_D_1
-913 MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR
-914 MX35_PAD_FEC_CRS__KPP_COL_5
-915 MX35_PAD_FEC_CRS__GPIO3_17
-916 MX35_PAD_FEC_CRS__IPU_FLASH_STROBE
-917 MX35_PAD_FEC_RDATA1__FEC_RDATA_1
-918 MX35_PAD_FEC_RDATA1__IPU_CSI_D_2
-919 MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC
-920 MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC
-921 MX35_PAD_FEC_RDATA1__KPP_COL_6
-922 MX35_PAD_FEC_RDATA1__GPIO3_18
-923 MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0
-924 MX35_PAD_FEC_TDATA1__FEC_TDATA_1
-925 MX35_PAD_FEC_TDATA1__IPU_CSI_D_3
-926 MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS
-927 MX35_PAD_FEC_TDATA1__KPP_COL_7
-928 MX35_PAD_FEC_TDATA1__GPIO3_19
-929 MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1
-930 MX35_PAD_FEC_RDATA2__FEC_RDATA_2
-931 MX35_PAD_FEC_RDATA2__IPU_CSI_D_4
-932 MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD
-933 MX35_PAD_FEC_RDATA2__KPP_ROW_4
-934 MX35_PAD_FEC_RDATA2__GPIO3_20
-935 MX35_PAD_FEC_TDATA2__FEC_TDATA_2
-936 MX35_PAD_FEC_TDATA2__IPU_CSI_D_5
-937 MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD
-938 MX35_PAD_FEC_TDATA2__KPP_ROW_5
-939 MX35_PAD_FEC_TDATA2__GPIO3_21
-940 MX35_PAD_FEC_RDATA3__FEC_RDATA_3
-941 MX35_PAD_FEC_RDATA3__IPU_CSI_D_6
-942 MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC
-943 MX35_PAD_FEC_RDATA3__KPP_ROW_6
-944 MX35_PAD_FEC_RDATA3__GPIO3_22
-945 MX35_PAD_FEC_TDATA3__FEC_TDATA_3
-946 MX35_PAD_FEC_TDATA3__IPU_CSI_D_7
-947 MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS
-948 MX35_PAD_FEC_TDATA3__KPP_ROW_7
-949 MX35_PAD_FEC_TDATA3__GPIO3_23
-950 MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK
-951 MX35_PAD_TEST_MODE__TCU_TEST_MODE
+Refer to imx35-pinfunc.h in device tree source folder for all available
+imx35 PIN_FUNC_ID.

Documentation/devicetree/bindings/pinctrl/fsl,imx51-pinctrl.txt

@@ -28,760 +28,5 @@ PAD_CTL_DSE_MAX			(3 << 1)
 PAD_CTL_SRE_FAST		(1 << 0)
 PAD_CTL_SRE_SLOW		(0 << 0)
 
-See below for available PIN_FUNC_ID for imx51:
-MX51_PAD_EIM_D16__AUD4_RXFS			0
-MX51_PAD_EIM_D16__AUD5_TXD			1
-MX51_PAD_EIM_D16__EIM_D16			2
-MX51_PAD_EIM_D16__GPIO2_0			3
-MX51_PAD_EIM_D16__I2C1_SDA			4
-MX51_PAD_EIM_D16__UART2_CTS			5
-MX51_PAD_EIM_D16__USBH2_DATA0			6
-MX51_PAD_EIM_D17__AUD5_RXD			7
-MX51_PAD_EIM_D17__EIM_D17			8
-MX51_PAD_EIM_D17__GPIO2_1			9
-MX51_PAD_EIM_D17__UART2_RXD			10
-MX51_PAD_EIM_D17__UART3_CTS			11
-MX51_PAD_EIM_D17__USBH2_DATA1			12
-MX51_PAD_EIM_D18__AUD5_TXC			13
-MX51_PAD_EIM_D18__EIM_D18			14
-MX51_PAD_EIM_D18__GPIO2_2			15
-MX51_PAD_EIM_D18__UART2_TXD			16
-MX51_PAD_EIM_D18__UART3_RTS			17
-MX51_PAD_EIM_D18__USBH2_DATA2			18
-MX51_PAD_EIM_D19__AUD4_RXC			19
-MX51_PAD_EIM_D19__AUD5_TXFS			20
-MX51_PAD_EIM_D19__EIM_D19			21
-MX51_PAD_EIM_D19__GPIO2_3			22
-MX51_PAD_EIM_D19__I2C1_SCL			23
-MX51_PAD_EIM_D19__UART2_RTS			24
-MX51_PAD_EIM_D19__USBH2_DATA3			25
-MX51_PAD_EIM_D20__AUD4_TXD			26
-MX51_PAD_EIM_D20__EIM_D20			27
-MX51_PAD_EIM_D20__GPIO2_4			28
-MX51_PAD_EIM_D20__SRTC_ALARM_DEB		29
-MX51_PAD_EIM_D20__USBH2_DATA4			30
-MX51_PAD_EIM_D21__AUD4_RXD			31
-MX51_PAD_EIM_D21__EIM_D21			32
-MX51_PAD_EIM_D21__GPIO2_5			33
-MX51_PAD_EIM_D21__SRTC_ALARM_DEB		34
-MX51_PAD_EIM_D21__USBH2_DATA5			35
-MX51_PAD_EIM_D22__AUD4_TXC			36
-MX51_PAD_EIM_D22__EIM_D22			37
-MX51_PAD_EIM_D22__GPIO2_6			38
-MX51_PAD_EIM_D22__USBH2_DATA6			39
-MX51_PAD_EIM_D23__AUD4_TXFS			40
-MX51_PAD_EIM_D23__EIM_D23			41
-MX51_PAD_EIM_D23__GPIO2_7			42
-MX51_PAD_EIM_D23__SPDIF_OUT1			43
-MX51_PAD_EIM_D23__USBH2_DATA7			44
-MX51_PAD_EIM_D24__AUD6_RXFS			45
-MX51_PAD_EIM_D24__EIM_D24			46
-MX51_PAD_EIM_D24__GPIO2_8			47
-MX51_PAD_EIM_D24__I2C2_SDA			48
-MX51_PAD_EIM_D24__UART3_CTS			49
-MX51_PAD_EIM_D24__USBOTG_DATA0			50
-MX51_PAD_EIM_D25__EIM_D25			51
-MX51_PAD_EIM_D25__KEY_COL6			52
-MX51_PAD_EIM_D25__UART2_CTS			53
-MX51_PAD_EIM_D25__UART3_RXD			54
-MX51_PAD_EIM_D25__USBOTG_DATA1			55
-MX51_PAD_EIM_D26__EIM_D26			56
-MX51_PAD_EIM_D26__KEY_COL7			57
-MX51_PAD_EIM_D26__UART2_RTS			58
-MX51_PAD_EIM_D26__UART3_TXD			59
-MX51_PAD_EIM_D26__USBOTG_DATA2			60
-MX51_PAD_EIM_D27__AUD6_RXC			61
-MX51_PAD_EIM_D27__EIM_D27			62
-MX51_PAD_EIM_D27__GPIO2_9			63
-MX51_PAD_EIM_D27__I2C2_SCL			64
-MX51_PAD_EIM_D27__UART3_RTS			65
-MX51_PAD_EIM_D27__USBOTG_DATA3			66
-MX51_PAD_EIM_D28__AUD6_TXD			67
-MX51_PAD_EIM_D28__EIM_D28			68
-MX51_PAD_EIM_D28__KEY_ROW4			69
-MX51_PAD_EIM_D28__USBOTG_DATA4			70
-MX51_PAD_EIM_D29__AUD6_RXD			71
-MX51_PAD_EIM_D29__EIM_D29			72
-MX51_PAD_EIM_D29__KEY_ROW5			73
-MX51_PAD_EIM_D29__USBOTG_DATA5			74
-MX51_PAD_EIM_D30__AUD6_TXC			75
-MX51_PAD_EIM_D30__EIM_D30			76
-MX51_PAD_EIM_D30__KEY_ROW6			77
-MX51_PAD_EIM_D30__USBOTG_DATA6			78
-MX51_PAD_EIM_D31__AUD6_TXFS			79
-MX51_PAD_EIM_D31__EIM_D31			80
-MX51_PAD_EIM_D31__KEY_ROW7			81
-MX51_PAD_EIM_D31__USBOTG_DATA7			82
-MX51_PAD_EIM_A16__EIM_A16			83
-MX51_PAD_EIM_A16__GPIO2_10			84
-MX51_PAD_EIM_A16__OSC_FREQ_SEL0			85
-MX51_PAD_EIM_A17__EIM_A17			86
-MX51_PAD_EIM_A17__GPIO2_11			87
-MX51_PAD_EIM_A17__OSC_FREQ_SEL1			88
-MX51_PAD_EIM_A18__BOOT_LPB0			89
-MX51_PAD_EIM_A18__EIM_A18			90
-MX51_PAD_EIM_A18__GPIO2_12			91
-MX51_PAD_EIM_A19__BOOT_LPB1			92
-MX51_PAD_EIM_A19__EIM_A19			93
-MX51_PAD_EIM_A19__GPIO2_13			94
-MX51_PAD_EIM_A20__BOOT_UART_SRC0		95
-MX51_PAD_EIM_A20__EIM_A20			96
-MX51_PAD_EIM_A20__GPIO2_14			97
-MX51_PAD_EIM_A21__BOOT_UART_SRC1		98
-MX51_PAD_EIM_A21__EIM_A21			99
-MX51_PAD_EIM_A21__GPIO2_15			100
-MX51_PAD_EIM_A22__EIM_A22			101
-MX51_PAD_EIM_A22__GPIO2_16			102
-MX51_PAD_EIM_A23__BOOT_HPN_EN			103
-MX51_PAD_EIM_A23__EIM_A23			104
-MX51_PAD_EIM_A23__GPIO2_17			105
-MX51_PAD_EIM_A24__EIM_A24			106
-MX51_PAD_EIM_A24__GPIO2_18			107
-MX51_PAD_EIM_A24__USBH2_CLK			108
-MX51_PAD_EIM_A25__DISP1_PIN4			109
-MX51_PAD_EIM_A25__EIM_A25			110
-MX51_PAD_EIM_A25__GPIO2_19			111
-MX51_PAD_EIM_A25__USBH2_DIR			112
-MX51_PAD_EIM_A26__CSI1_DATA_EN			113
-MX51_PAD_EIM_A26__DISP2_EXT_CLK			114
-MX51_PAD_EIM_A26__EIM_A26			115
-MX51_PAD_EIM_A26__GPIO2_20			116
-MX51_PAD_EIM_A26__USBH2_STP			117
-MX51_PAD_EIM_A27__CSI2_DATA_EN			118
-MX51_PAD_EIM_A27__DISP1_PIN1			119
-MX51_PAD_EIM_A27__EIM_A27			120
-MX51_PAD_EIM_A27__GPIO2_21			121
-MX51_PAD_EIM_A27__USBH2_NXT			122
-MX51_PAD_EIM_EB0__EIM_EB0			123
-MX51_PAD_EIM_EB1__EIM_EB1			124
-MX51_PAD_EIM_EB2__AUD5_RXFS			125
-MX51_PAD_EIM_EB2__CSI1_D2			126
-MX51_PAD_EIM_EB2__EIM_EB2			127
-MX51_PAD_EIM_EB2__FEC_MDIO			128
-MX51_PAD_EIM_EB2__GPIO2_22			129
-MX51_PAD_EIM_EB2__GPT_CMPOUT1			130
-MX51_PAD_EIM_EB3__AUD5_RXC			131
-MX51_PAD_EIM_EB3__CSI1_D3			132
-MX51_PAD_EIM_EB3__EIM_EB3			133
-MX51_PAD_EIM_EB3__FEC_RDATA1			134
-MX51_PAD_EIM_EB3__GPIO2_23			135
-MX51_PAD_EIM_EB3__GPT_CMPOUT2			136
-MX51_PAD_EIM_OE__EIM_OE				137
-MX51_PAD_EIM_OE__GPIO2_24			138
-MX51_PAD_EIM_CS0__EIM_CS0			139
-MX51_PAD_EIM_CS0__GPIO2_25			140
-MX51_PAD_EIM_CS1__EIM_CS1			141
-MX51_PAD_EIM_CS1__GPIO2_26			142
-MX51_PAD_EIM_CS2__AUD5_TXD			143
-MX51_PAD_EIM_CS2__CSI1_D4			144
-MX51_PAD_EIM_CS2__EIM_CS2			145
-MX51_PAD_EIM_CS2__FEC_RDATA2			146
-MX51_PAD_EIM_CS2__GPIO2_27			147
-MX51_PAD_EIM_CS2__USBOTG_STP			148
-MX51_PAD_EIM_CS3__AUD5_RXD			149
-MX51_PAD_EIM_CS3__CSI1_D5			150
-MX51_PAD_EIM_CS3__EIM_CS3			151
-MX51_PAD_EIM_CS3__FEC_RDATA3			152
-MX51_PAD_EIM_CS3__GPIO2_28			153
-MX51_PAD_EIM_CS3__USBOTG_NXT			154
-MX51_PAD_EIM_CS4__AUD5_TXC			155
-MX51_PAD_EIM_CS4__CSI1_D6			156
-MX51_PAD_EIM_CS4__EIM_CS4			157
-MX51_PAD_EIM_CS4__FEC_RX_ER			158
-MX51_PAD_EIM_CS4__GPIO2_29			159
-MX51_PAD_EIM_CS4__USBOTG_CLK			160
-MX51_PAD_EIM_CS5__AUD5_TXFS			161
-MX51_PAD_EIM_CS5__CSI1_D7			162
-MX51_PAD_EIM_CS5__DISP1_EXT_CLK			163
-MX51_PAD_EIM_CS5__EIM_CS5			164
-MX51_PAD_EIM_CS5__FEC_CRS			165
-MX51_PAD_EIM_CS5__GPIO2_30			166
-MX51_PAD_EIM_CS5__USBOTG_DIR			167
-MX51_PAD_EIM_DTACK__EIM_DTACK			168
-MX51_PAD_EIM_DTACK__GPIO2_31			169
-MX51_PAD_EIM_LBA__EIM_LBA			170
-MX51_PAD_EIM_LBA__GPIO3_1			171
-MX51_PAD_EIM_CRE__EIM_CRE			172
-MX51_PAD_EIM_CRE__GPIO3_2			173
-MX51_PAD_DRAM_CS1__DRAM_CS1			174
-MX51_PAD_NANDF_WE_B__GPIO3_3			175
-MX51_PAD_NANDF_WE_B__NANDF_WE_B			176
-MX51_PAD_NANDF_WE_B__PATA_DIOW			177
-MX51_PAD_NANDF_WE_B__SD3_DATA0			178
-MX51_PAD_NANDF_RE_B__GPIO3_4			179
-MX51_PAD_NANDF_RE_B__NANDF_RE_B			180
-MX51_PAD_NANDF_RE_B__PATA_DIOR			181
-MX51_PAD_NANDF_RE_B__SD3_DATA1			182
-MX51_PAD_NANDF_ALE__GPIO3_5			183
-MX51_PAD_NANDF_ALE__NANDF_ALE			184
-MX51_PAD_NANDF_ALE__PATA_BUFFER_EN		185
-MX51_PAD_NANDF_CLE__GPIO3_6			186
-MX51_PAD_NANDF_CLE__NANDF_CLE			187
-MX51_PAD_NANDF_CLE__PATA_RESET_B		188
-MX51_PAD_NANDF_WP_B__GPIO3_7			189
-MX51_PAD_NANDF_WP_B__NANDF_WP_B			190
-MX51_PAD_NANDF_WP_B__PATA_DMACK			191
-MX51_PAD_NANDF_WP_B__SD3_DATA2			192
-MX51_PAD_NANDF_RB0__ECSPI2_SS1			193
-MX51_PAD_NANDF_RB0__GPIO3_8			194
-MX51_PAD_NANDF_RB0__NANDF_RB0			195
-MX51_PAD_NANDF_RB0__PATA_DMARQ			196
-MX51_PAD_NANDF_RB0__SD3_DATA3			197
-MX51_PAD_NANDF_RB1__CSPI_MOSI			198
-MX51_PAD_NANDF_RB1__ECSPI2_RDY			199
-MX51_PAD_NANDF_RB1__GPIO3_9			200
-MX51_PAD_NANDF_RB1__NANDF_RB1			201
-MX51_PAD_NANDF_RB1__PATA_IORDY			202
-MX51_PAD_NANDF_RB1__SD4_CMD			203
-MX51_PAD_NANDF_RB2__DISP2_WAIT			204
-MX51_PAD_NANDF_RB2__ECSPI2_SCLK			205
-MX51_PAD_NANDF_RB2__FEC_COL			206
-MX51_PAD_NANDF_RB2__GPIO3_10			207
-MX51_PAD_NANDF_RB2__NANDF_RB2			208
-MX51_PAD_NANDF_RB2__USBH3_H3_DP			209
-MX51_PAD_NANDF_RB2__USBH3_NXT			210
-MX51_PAD_NANDF_RB3__DISP1_WAIT			211
-MX51_PAD_NANDF_RB3__ECSPI2_MISO			212
-MX51_PAD_NANDF_RB3__FEC_RX_CLK			213
-MX51_PAD_NANDF_RB3__GPIO3_11			214
-MX51_PAD_NANDF_RB3__NANDF_RB3			215
-MX51_PAD_NANDF_RB3__USBH3_CLK			216
-MX51_PAD_NANDF_RB3__USBH3_H3_DM			217
-MX51_PAD_GPIO_NAND__GPIO_NAND			218
-MX51_PAD_GPIO_NAND__PATA_INTRQ			219
-MX51_PAD_NANDF_CS0__GPIO3_16			220
-MX51_PAD_NANDF_CS0__NANDF_CS0			221
-MX51_PAD_NANDF_CS1__GPIO3_17			222
-MX51_PAD_NANDF_CS1__NANDF_CS1			223
-MX51_PAD_NANDF_CS2__CSPI_SCLK			224
-MX51_PAD_NANDF_CS2__FEC_TX_ER			225
-MX51_PAD_NANDF_CS2__GPIO3_18			226
-MX51_PAD_NANDF_CS2__NANDF_CS2			227
-MX51_PAD_NANDF_CS2__PATA_CS_0			228
-MX51_PAD_NANDF_CS2__SD4_CLK			229
-MX51_PAD_NANDF_CS2__USBH3_H1_DP			230
-MX51_PAD_NANDF_CS3__FEC_MDC			231
-MX51_PAD_NANDF_CS3__GPIO3_19			232
-MX51_PAD_NANDF_CS3__NANDF_CS3			233
-MX51_PAD_NANDF_CS3__PATA_CS_1			234
-MX51_PAD_NANDF_CS3__SD4_DAT0			235
-MX51_PAD_NANDF_CS3__USBH3_H1_DM			236
-MX51_PAD_NANDF_CS4__FEC_TDATA1			237
-MX51_PAD_NANDF_CS4__GPIO3_20			238
-MX51_PAD_NANDF_CS4__NANDF_CS4			239
-MX51_PAD_NANDF_CS4__PATA_DA_0			240
-MX51_PAD_NANDF_CS4__SD4_DAT1			241
-MX51_PAD_NANDF_CS4__USBH3_STP			242
-MX51_PAD_NANDF_CS5__FEC_TDATA2			243
-MX51_PAD_NANDF_CS5__GPIO3_21			244
-MX51_PAD_NANDF_CS5__NANDF_CS5			245
-MX51_PAD_NANDF_CS5__PATA_DA_1			246
-MX51_PAD_NANDF_CS5__SD4_DAT2			247
-MX51_PAD_NANDF_CS5__USBH3_DIR			248
-MX51_PAD_NANDF_CS6__CSPI_SS3			249
-MX51_PAD_NANDF_CS6__FEC_TDATA3			250
-MX51_PAD_NANDF_CS6__GPIO3_22			251
-MX51_PAD_NANDF_CS6__NANDF_CS6			252
-MX51_PAD_NANDF_CS6__PATA_DA_2			253
-MX51_PAD_NANDF_CS6__SD4_DAT3			254
-MX51_PAD_NANDF_CS7__FEC_TX_EN			255
-MX51_PAD_NANDF_CS7__GPIO3_23			256
-MX51_PAD_NANDF_CS7__NANDF_CS7			257
-MX51_PAD_NANDF_CS7__SD3_CLK			258
-MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0		259
-MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK		260
-MX51_PAD_NANDF_RDY_INT__GPIO3_24		261
-MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT		262
-MX51_PAD_NANDF_RDY_INT__SD3_CMD			263
-MX51_PAD_NANDF_D15__ECSPI2_MOSI			264
-MX51_PAD_NANDF_D15__GPIO3_25			265
-MX51_PAD_NANDF_D15__NANDF_D15			266
-MX51_PAD_NANDF_D15__PATA_DATA15			267
-MX51_PAD_NANDF_D15__SD3_DAT7			268
-MX51_PAD_NANDF_D14__ECSPI2_SS3			269
-MX51_PAD_NANDF_D14__GPIO3_26			270
-MX51_PAD_NANDF_D14__NANDF_D14			271
-MX51_PAD_NANDF_D14__PATA_DATA14			272
-MX51_PAD_NANDF_D14__SD3_DAT6			273
-MX51_PAD_NANDF_D13__ECSPI2_SS2			274
-MX51_PAD_NANDF_D13__GPIO3_27			275
-MX51_PAD_NANDF_D13__NANDF_D13			276
-MX51_PAD_NANDF_D13__PATA_DATA13			277
-MX51_PAD_NANDF_D13__SD3_DAT5			278
-MX51_PAD_NANDF_D12__ECSPI2_SS1			279
-MX51_PAD_NANDF_D12__GPIO3_28			280
-MX51_PAD_NANDF_D12__NANDF_D12			281
-MX51_PAD_NANDF_D12__PATA_DATA12			282
-MX51_PAD_NANDF_D12__SD3_DAT4			283
-MX51_PAD_NANDF_D11__FEC_RX_DV			284
-MX51_PAD_NANDF_D11__GPIO3_29			285
-MX51_PAD_NANDF_D11__NANDF_D11			286
-MX51_PAD_NANDF_D11__PATA_DATA11			287
-MX51_PAD_NANDF_D11__SD3_DATA3			288
-MX51_PAD_NANDF_D10__GPIO3_30			289
-MX51_PAD_NANDF_D10__NANDF_D10			290
-MX51_PAD_NANDF_D10__PATA_DATA10			291
-MX51_PAD_NANDF_D10__SD3_DATA2			292
-MX51_PAD_NANDF_D9__FEC_RDATA0			293
-MX51_PAD_NANDF_D9__GPIO3_31			294
-MX51_PAD_NANDF_D9__NANDF_D9			295
-MX51_PAD_NANDF_D9__PATA_DATA9			296
-MX51_PAD_NANDF_D9__SD3_DATA1			297
-MX51_PAD_NANDF_D8__FEC_TDATA0			298
-MX51_PAD_NANDF_D8__GPIO4_0			299
-MX51_PAD_NANDF_D8__NANDF_D8			300
-MX51_PAD_NANDF_D8__PATA_DATA8			301
-MX51_PAD_NANDF_D8__SD3_DATA0			302
-MX51_PAD_NANDF_D7__GPIO4_1			303
-MX51_PAD_NANDF_D7__NANDF_D7			304
-MX51_PAD_NANDF_D7__PATA_DATA7			305
-MX51_PAD_NANDF_D7__USBH3_DATA0			306
-MX51_PAD_NANDF_D6__GPIO4_2			307
-MX51_PAD_NANDF_D6__NANDF_D6			308
-MX51_PAD_NANDF_D6__PATA_DATA6			309
-MX51_PAD_NANDF_D6__SD4_LCTL			310
-MX51_PAD_NANDF_D6__USBH3_DATA1			311
-MX51_PAD_NANDF_D5__GPIO4_3			312
-MX51_PAD_NANDF_D5__NANDF_D5			313
-MX51_PAD_NANDF_D5__PATA_DATA5			314
-MX51_PAD_NANDF_D5__SD4_WP			315
-MX51_PAD_NANDF_D5__USBH3_DATA2			316
-MX51_PAD_NANDF_D4__GPIO4_4			317
-MX51_PAD_NANDF_D4__NANDF_D4			318
-MX51_PAD_NANDF_D4__PATA_DATA4			319
-MX51_PAD_NANDF_D4__SD4_CD			320
-MX51_PAD_NANDF_D4__USBH3_DATA3			321
-MX51_PAD_NANDF_D3__GPIO4_5			322
-MX51_PAD_NANDF_D3__NANDF_D3			323
-MX51_PAD_NANDF_D3__PATA_DATA3			324
-MX51_PAD_NANDF_D3__SD4_DAT4			325
-MX51_PAD_NANDF_D3__USBH3_DATA4			326
-MX51_PAD_NANDF_D2__GPIO4_6			327
-MX51_PAD_NANDF_D2__NANDF_D2			328
-MX51_PAD_NANDF_D2__PATA_DATA2			329
-MX51_PAD_NANDF_D2__SD4_DAT5			330
-MX51_PAD_NANDF_D2__USBH3_DATA5			331
-MX51_PAD_NANDF_D1__GPIO4_7			332
-MX51_PAD_NANDF_D1__NANDF_D1			333
-MX51_PAD_NANDF_D1__PATA_DATA1			334
-MX51_PAD_NANDF_D1__SD4_DAT6			335
-MX51_PAD_NANDF_D1__USBH3_DATA6			336
-MX51_PAD_NANDF_D0__GPIO4_8			337
-MX51_PAD_NANDF_D0__NANDF_D0			338
-MX51_PAD_NANDF_D0__PATA_DATA0			339
-MX51_PAD_NANDF_D0__SD4_DAT7			340
-MX51_PAD_NANDF_D0__USBH3_DATA7			341
-MX51_PAD_CSI1_D8__CSI1_D8			342
-MX51_PAD_CSI1_D8__GPIO3_12			343
-MX51_PAD_CSI1_D9__CSI1_D9			344
-MX51_PAD_CSI1_D9__GPIO3_13			345
-MX51_PAD_CSI1_D10__CSI1_D10			346
-MX51_PAD_CSI1_D11__CSI1_D11			347
-MX51_PAD_CSI1_D12__CSI1_D12			348
-MX51_PAD_CSI1_D13__CSI1_D13			349
-MX51_PAD_CSI1_D14__CSI1_D14			350
-MX51_PAD_CSI1_D15__CSI1_D15			351
-MX51_PAD_CSI1_D16__CSI1_D16			352
-MX51_PAD_CSI1_D17__CSI1_D17			353
-MX51_PAD_CSI1_D18__CSI1_D18			354
-MX51_PAD_CSI1_D19__CSI1_D19			355
-MX51_PAD_CSI1_VSYNC__CSI1_VSYNC			356
-MX51_PAD_CSI1_VSYNC__GPIO3_14			357
-MX51_PAD_CSI1_HSYNC__CSI1_HSYNC			358
-MX51_PAD_CSI1_HSYNC__GPIO3_15			359
-MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK		360
-MX51_PAD_CSI1_MCLK__CSI1_MCLK			361
-MX51_PAD_CSI2_D12__CSI2_D12			362
-MX51_PAD_CSI2_D12__GPIO4_9			363
-MX51_PAD_CSI2_D13__CSI2_D13			364
-MX51_PAD_CSI2_D13__GPIO4_10			365
-MX51_PAD_CSI2_D14__CSI2_D14			366
-MX51_PAD_CSI2_D15__CSI2_D15			367
-MX51_PAD_CSI2_D16__CSI2_D16			368
-MX51_PAD_CSI2_D17__CSI2_D17			369
-MX51_PAD_CSI2_D18__CSI2_D18			370
-MX51_PAD_CSI2_D18__GPIO4_11			371
-MX51_PAD_CSI2_D19__CSI2_D19			372
-MX51_PAD_CSI2_D19__GPIO4_12			373
-MX51_PAD_CSI2_VSYNC__CSI2_VSYNC			374
-MX51_PAD_CSI2_VSYNC__GPIO4_13			375
-MX51_PAD_CSI2_HSYNC__CSI2_HSYNC			376
-MX51_PAD_CSI2_HSYNC__GPIO4_14			377
-MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK		378
-MX51_PAD_CSI2_PIXCLK__GPIO4_15			379
-MX51_PAD_I2C1_CLK__GPIO4_16			380
-MX51_PAD_I2C1_CLK__I2C1_CLK			381
-MX51_PAD_I2C1_DAT__GPIO4_17			382
-MX51_PAD_I2C1_DAT__I2C1_DAT			383
-MX51_PAD_AUD3_BB_TXD__AUD3_TXD			384
-MX51_PAD_AUD3_BB_TXD__GPIO4_18			385
-MX51_PAD_AUD3_BB_RXD__AUD3_RXD			386
-MX51_PAD_AUD3_BB_RXD__GPIO4_19			387
-MX51_PAD_AUD3_BB_RXD__UART3_RXD			388
-MX51_PAD_AUD3_BB_CK__AUD3_TXC			389
-MX51_PAD_AUD3_BB_CK__GPIO4_20			390
-MX51_PAD_AUD3_BB_FS__AUD3_TXFS			391
-MX51_PAD_AUD3_BB_FS__GPIO4_21			392
-MX51_PAD_AUD3_BB_FS__UART3_TXD			393
-MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI		394
-MX51_PAD_CSPI1_MOSI__GPIO4_22			395
-MX51_PAD_CSPI1_MOSI__I2C1_SDA			396
-MX51_PAD_CSPI1_MISO__AUD4_RXD			397
-MX51_PAD_CSPI1_MISO__ECSPI1_MISO		398
-MX51_PAD_CSPI1_MISO__GPIO4_23			399
-MX51_PAD_CSPI1_SS0__AUD4_TXC			400
-MX51_PAD_CSPI1_SS0__ECSPI1_SS0			401
-MX51_PAD_CSPI1_SS0__GPIO4_24			402
-MX51_PAD_CSPI1_SS1__AUD4_TXD			403
-MX51_PAD_CSPI1_SS1__ECSPI1_SS1			404
-MX51_PAD_CSPI1_SS1__GPIO4_25			405
-MX51_PAD_CSPI1_RDY__AUD4_TXFS			406
-MX51_PAD_CSPI1_RDY__ECSPI1_RDY			407
-MX51_PAD_CSPI1_RDY__GPIO4_26			408
-MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK		409
-MX51_PAD_CSPI1_SCLK__GPIO4_27			410
-MX51_PAD_CSPI1_SCLK__I2C1_SCL			411
-MX51_PAD_UART1_RXD__GPIO4_28			412
-MX51_PAD_UART1_RXD__UART1_RXD			413
-MX51_PAD_UART1_TXD__GPIO4_29			414
-MX51_PAD_UART1_TXD__PWM2_PWMO			415
-MX51_PAD_UART1_TXD__UART1_TXD			416
-MX51_PAD_UART1_RTS__GPIO4_30			417
-MX51_PAD_UART1_RTS__UART1_RTS			418
-MX51_PAD_UART1_CTS__GPIO4_31			419
-MX51_PAD_UART1_CTS__UART1_CTS			420
-MX51_PAD_UART2_RXD__FIRI_TXD			421
-MX51_PAD_UART2_RXD__GPIO1_20			422
-MX51_PAD_UART2_RXD__UART2_RXD			423
-MX51_PAD_UART2_TXD__FIRI_RXD			424
-MX51_PAD_UART2_TXD__GPIO1_21			425
-MX51_PAD_UART2_TXD__UART2_TXD			426
-MX51_PAD_UART3_RXD__CSI1_D0			427
-MX51_PAD_UART3_RXD__GPIO1_22			428
-MX51_PAD_UART3_RXD__UART1_DTR			429
-MX51_PAD_UART3_RXD__UART3_RXD			430
-MX51_PAD_UART3_TXD__CSI1_D1			431
-MX51_PAD_UART3_TXD__GPIO1_23			432
-MX51_PAD_UART3_TXD__UART1_DSR			433
-MX51_PAD_UART3_TXD__UART3_TXD			434
-MX51_PAD_OWIRE_LINE__GPIO1_24			435
-MX51_PAD_OWIRE_LINE__OWIRE_LINE			436
-MX51_PAD_OWIRE_LINE__SPDIF_OUT			437
-MX51_PAD_KEY_ROW0__KEY_ROW0			438
-MX51_PAD_KEY_ROW1__KEY_ROW1			439
-MX51_PAD_KEY_ROW2__KEY_ROW2			440
-MX51_PAD_KEY_ROW3__KEY_ROW3			441
-MX51_PAD_KEY_COL0__KEY_COL0			442
-MX51_PAD_KEY_COL0__PLL1_BYP			443
-MX51_PAD_KEY_COL1__KEY_COL1			444
-MX51_PAD_KEY_COL1__PLL2_BYP			445
-MX51_PAD_KEY_COL2__KEY_COL2			446
-MX51_PAD_KEY_COL2__PLL3_BYP			447
-MX51_PAD_KEY_COL3__KEY_COL3			448
-MX51_PAD_KEY_COL4__I2C2_SCL			449
-MX51_PAD_KEY_COL4__KEY_COL4			450
-MX51_PAD_KEY_COL4__SPDIF_OUT1			451
-MX51_PAD_KEY_COL4__UART1_RI			452
-MX51_PAD_KEY_COL4__UART3_RTS			453
-MX51_PAD_KEY_COL5__I2C2_SDA			454
-MX51_PAD_KEY_COL5__KEY_COL5			455
-MX51_PAD_KEY_COL5__UART1_DCD			456
-MX51_PAD_KEY_COL5__UART3_CTS			457
-MX51_PAD_USBH1_CLK__CSPI_SCLK			458
-MX51_PAD_USBH1_CLK__GPIO1_25			459
-MX51_PAD_USBH1_CLK__I2C2_SCL			460
-MX51_PAD_USBH1_CLK__USBH1_CLK			461
-MX51_PAD_USBH1_DIR__CSPI_MOSI			462
-MX51_PAD_USBH1_DIR__GPIO1_26			463
-MX51_PAD_USBH1_DIR__I2C2_SDA			464
-MX51_PAD_USBH1_DIR__USBH1_DIR			465
-MX51_PAD_USBH1_STP__CSPI_RDY			466
-MX51_PAD_USBH1_STP__GPIO1_27			467
-MX51_PAD_USBH1_STP__UART3_RXD			468
-MX51_PAD_USBH1_STP__USBH1_STP			469
-MX51_PAD_USBH1_NXT__CSPI_MISO			470
-MX51_PAD_USBH1_NXT__GPIO1_28			471
-MX51_PAD_USBH1_NXT__UART3_TXD			472
-MX51_PAD_USBH1_NXT__USBH1_NXT			473
-MX51_PAD_USBH1_DATA0__GPIO1_11			474
-MX51_PAD_USBH1_DATA0__UART2_CTS			475
-MX51_PAD_USBH1_DATA0__USBH1_DATA0		476
-MX51_PAD_USBH1_DATA1__GPIO1_12			477
-MX51_PAD_USBH1_DATA1__UART2_RXD			478
-MX51_PAD_USBH1_DATA1__USBH1_DATA1		479
-MX51_PAD_USBH1_DATA2__GPIO1_13			480
-MX51_PAD_USBH1_DATA2__UART2_TXD			481
-MX51_PAD_USBH1_DATA2__USBH1_DATA2		482
-MX51_PAD_USBH1_DATA3__GPIO1_14			483
-MX51_PAD_USBH1_DATA3__UART2_RTS			484
-MX51_PAD_USBH1_DATA3__USBH1_DATA3		485
-MX51_PAD_USBH1_DATA4__CSPI_SS0			486
-MX51_PAD_USBH1_DATA4__GPIO1_15			487
-MX51_PAD_USBH1_DATA4__USBH1_DATA4		488
-MX51_PAD_USBH1_DATA5__CSPI_SS1			489
-MX51_PAD_USBH1_DATA5__GPIO1_16			490
-MX51_PAD_USBH1_DATA5__USBH1_DATA5		491
-MX51_PAD_USBH1_DATA6__CSPI_SS3			492
-MX51_PAD_USBH1_DATA6__GPIO1_17			493
-MX51_PAD_USBH1_DATA6__USBH1_DATA6		494
-MX51_PAD_USBH1_DATA7__ECSPI1_SS3		495
-MX51_PAD_USBH1_DATA7__ECSPI2_SS3		496
-MX51_PAD_USBH1_DATA7__GPIO1_18			497
-MX51_PAD_USBH1_DATA7__USBH1_DATA7		498
-MX51_PAD_DI1_PIN11__DI1_PIN11			499
-MX51_PAD_DI1_PIN11__ECSPI1_SS2			500
-MX51_PAD_DI1_PIN11__GPIO3_0			501
-MX51_PAD_DI1_PIN12__DI1_PIN12			502
-MX51_PAD_DI1_PIN12__GPIO3_1			503
-MX51_PAD_DI1_PIN13__DI1_PIN13			504
-MX51_PAD_DI1_PIN13__GPIO3_2			505
-MX51_PAD_DI1_D0_CS__DI1_D0_CS			506
-MX51_PAD_DI1_D0_CS__GPIO3_3			507
-MX51_PAD_DI1_D1_CS__DI1_D1_CS			508
-MX51_PAD_DI1_D1_CS__DISP1_PIN14			509
-MX51_PAD_DI1_D1_CS__DISP1_PIN5			510
-MX51_PAD_DI1_D1_CS__GPIO3_4			511
-MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1		512
-MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN		513
-MX51_PAD_DISPB2_SER_DIN__GPIO3_5		514
-MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6		515
-MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO		516
-MX51_PAD_DISPB2_SER_DIO__GPIO3_6		517
-MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17		518
-MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7		519
-MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK		520
-MX51_PAD_DISPB2_SER_CLK__GPIO3_7		521
-MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK		522
-MX51_PAD_DISPB2_SER_RS__DISP1_PIN16		523
-MX51_PAD_DISPB2_SER_RS__DISP1_PIN8		524
-MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS		525
-MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS		526
-MX51_PAD_DISPB2_SER_RS__GPIO3_8			527
-MX51_PAD_DISP1_DAT0__DISP1_DAT0			528
-MX51_PAD_DISP1_DAT1__DISP1_DAT1			529
-MX51_PAD_DISP1_DAT2__DISP1_DAT2			530
-MX51_PAD_DISP1_DAT3__DISP1_DAT3			531
-MX51_PAD_DISP1_DAT4__DISP1_DAT4			532
-MX51_PAD_DISP1_DAT5__DISP1_DAT5			533
-MX51_PAD_DISP1_DAT6__BOOT_USB_SRC		534
-MX51_PAD_DISP1_DAT6__DISP1_DAT6			535
-MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG		536
-MX51_PAD_DISP1_DAT7__DISP1_DAT7			537
-MX51_PAD_DISP1_DAT8__BOOT_SRC0			538
-MX51_PAD_DISP1_DAT8__DISP1_DAT8			539
-MX51_PAD_DISP1_DAT9__BOOT_SRC1			540
-MX51_PAD_DISP1_DAT9__DISP1_DAT9			541
-MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE		542
-MX51_PAD_DISP1_DAT10__DISP1_DAT10		543
-MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2		544
-MX51_PAD_DISP1_DAT11__DISP1_DAT11		545
-MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL		546
-MX51_PAD_DISP1_DAT12__DISP1_DAT12		547
-MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0		548
-MX51_PAD_DISP1_DAT13__DISP1_DAT13		549
-MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1		550
-MX51_PAD_DISP1_DAT14__DISP1_DAT14		551
-MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH		552
-MX51_PAD_DISP1_DAT15__DISP1_DAT15		553
-MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0		554
-MX51_PAD_DISP1_DAT16__DISP1_DAT16		555
-MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1		556
-MX51_PAD_DISP1_DAT17__DISP1_DAT17		557
-MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0		558
-MX51_PAD_DISP1_DAT18__DISP1_DAT18		559
-MX51_PAD_DISP1_DAT18__DISP2_PIN11		560
-MX51_PAD_DISP1_DAT18__DISP2_PIN5		561
-MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1		562
-MX51_PAD_DISP1_DAT19__DISP1_DAT19		563
-MX51_PAD_DISP1_DAT19__DISP2_PIN12		564
-MX51_PAD_DISP1_DAT19__DISP2_PIN6		565
-MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0		566
-MX51_PAD_DISP1_DAT20__DISP1_DAT20		567
-MX51_PAD_DISP1_DAT20__DISP2_PIN13		568
-MX51_PAD_DISP1_DAT20__DISP2_PIN7		569
-MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1		570
-MX51_PAD_DISP1_DAT21__DISP1_DAT21		571
-MX51_PAD_DISP1_DAT21__DISP2_PIN14		572
-MX51_PAD_DISP1_DAT21__DISP2_PIN8		573
-MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0		574
-MX51_PAD_DISP1_DAT22__DISP1_DAT22		575
-MX51_PAD_DISP1_DAT22__DISP2_D0_CS		576
-MX51_PAD_DISP1_DAT22__DISP2_DAT16		577
-MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1		578
-MX51_PAD_DISP1_DAT23__DISP1_DAT23		579
-MX51_PAD_DISP1_DAT23__DISP2_D1_CS		580
-MX51_PAD_DISP1_DAT23__DISP2_DAT17		581
-MX51_PAD_DISP1_DAT23__DISP2_SER_CS		582
-MX51_PAD_DI1_PIN3__DI1_PIN3			583
-MX51_PAD_DI1_PIN2__DI1_PIN2			584
-MX51_PAD_DI_GP2__DISP1_SER_CLK			585
-MX51_PAD_DI_GP2__DISP2_WAIT			586
-MX51_PAD_DI_GP3__CSI1_DATA_EN			587
-MX51_PAD_DI_GP3__DISP1_SER_DIO			588
-MX51_PAD_DI_GP3__FEC_TX_ER			589
-MX51_PAD_DI2_PIN4__CSI2_DATA_EN			590
-MX51_PAD_DI2_PIN4__DI2_PIN4			591
-MX51_PAD_DI2_PIN4__FEC_CRS			592
-MX51_PAD_DI2_PIN2__DI2_PIN2			593
-MX51_PAD_DI2_PIN2__FEC_MDC			594
-MX51_PAD_DI2_PIN3__DI2_PIN3			595
-MX51_PAD_DI2_PIN3__FEC_MDIO			596
-MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK		597
-MX51_PAD_DI2_DISP_CLK__FEC_RDATA1		598
-MX51_PAD_DI_GP4__DI2_PIN15			599
-MX51_PAD_DI_GP4__DISP1_SER_DIN			600
-MX51_PAD_DI_GP4__DISP2_PIN1			601
-MX51_PAD_DI_GP4__FEC_RDATA2			602
-MX51_PAD_DISP2_DAT0__DISP2_DAT0			603
-MX51_PAD_DISP2_DAT0__FEC_RDATA3			604
-MX51_PAD_DISP2_DAT0__KEY_COL6			605
-MX51_PAD_DISP2_DAT0__UART3_RXD			606
-MX51_PAD_DISP2_DAT0__USBH3_CLK			607
-MX51_PAD_DISP2_DAT1__DISP2_DAT1			608
-MX51_PAD_DISP2_DAT1__FEC_RX_ER			609
-MX51_PAD_DISP2_DAT1__KEY_COL7			610
-MX51_PAD_DISP2_DAT1__UART3_TXD			611
-MX51_PAD_DISP2_DAT1__USBH3_DIR			612
-MX51_PAD_DISP2_DAT2__DISP2_DAT2			613
-MX51_PAD_DISP2_DAT3__DISP2_DAT3			614
-MX51_PAD_DISP2_DAT4__DISP2_DAT4			615
-MX51_PAD_DISP2_DAT5__DISP2_DAT5			616
-MX51_PAD_DISP2_DAT6__DISP2_DAT6			617
-MX51_PAD_DISP2_DAT6__FEC_TDATA1			618
-MX51_PAD_DISP2_DAT6__GPIO1_19			619
-MX51_PAD_DISP2_DAT6__KEY_ROW4			620
-MX51_PAD_DISP2_DAT6__USBH3_STP			621
-MX51_PAD_DISP2_DAT7__DISP2_DAT7			622
-MX51_PAD_DISP2_DAT7__FEC_TDATA2			623
-MX51_PAD_DISP2_DAT7__GPIO1_29			624
-MX51_PAD_DISP2_DAT7__KEY_ROW5			625
-MX51_PAD_DISP2_DAT7__USBH3_NXT			626
-MX51_PAD_DISP2_DAT8__DISP2_DAT8			627
-MX51_PAD_DISP2_DAT8__FEC_TDATA3			628
-MX51_PAD_DISP2_DAT8__GPIO1_30			629
-MX51_PAD_DISP2_DAT8__KEY_ROW6			630
-MX51_PAD_DISP2_DAT8__USBH3_DATA0		631
-MX51_PAD_DISP2_DAT9__AUD6_RXC			632
-MX51_PAD_DISP2_DAT9__DISP2_DAT9			633
-MX51_PAD_DISP2_DAT9__FEC_TX_EN			634
-MX51_PAD_DISP2_DAT9__GPIO1_31			635
-MX51_PAD_DISP2_DAT9__USBH3_DATA1		636
-MX51_PAD_DISP2_DAT10__DISP2_DAT10		637
-MX51_PAD_DISP2_DAT10__DISP2_SER_CS		638
-MX51_PAD_DISP2_DAT10__FEC_COL			639
-MX51_PAD_DISP2_DAT10__KEY_ROW7			640
-MX51_PAD_DISP2_DAT10__USBH3_DATA2		641
-MX51_PAD_DISP2_DAT11__AUD6_TXD			642
-MX51_PAD_DISP2_DAT11__DISP2_DAT11		643
-MX51_PAD_DISP2_DAT11__FEC_RX_CLK		644
-MX51_PAD_DISP2_DAT11__GPIO1_10			645
-MX51_PAD_DISP2_DAT11__USBH3_DATA3		646
-MX51_PAD_DISP2_DAT12__AUD6_RXD			647
-MX51_PAD_DISP2_DAT12__DISP2_DAT12		648
-MX51_PAD_DISP2_DAT12__FEC_RX_DV			649
-MX51_PAD_DISP2_DAT12__USBH3_DATA4		650
-MX51_PAD_DISP2_DAT13__AUD6_TXC			651
-MX51_PAD_DISP2_DAT13__DISP2_DAT13		652
-MX51_PAD_DISP2_DAT13__FEC_TX_CLK		653
-MX51_PAD_DISP2_DAT13__USBH3_DATA5		654
-MX51_PAD_DISP2_DAT14__AUD6_TXFS			655
-MX51_PAD_DISP2_DAT14__DISP2_DAT14		656
-MX51_PAD_DISP2_DAT14__FEC_RDATA0		657
-MX51_PAD_DISP2_DAT14__USBH3_DATA6		658
-MX51_PAD_DISP2_DAT15__AUD6_RXFS			659
-MX51_PAD_DISP2_DAT15__DISP1_SER_CS		660
-MX51_PAD_DISP2_DAT15__DISP2_DAT15		661
-MX51_PAD_DISP2_DAT15__FEC_TDATA0		662
-MX51_PAD_DISP2_DAT15__USBH3_DATA7		663
-MX51_PAD_SD1_CMD__AUD5_RXFS			664
-MX51_PAD_SD1_CMD__CSPI_MOSI			665
-MX51_PAD_SD1_CMD__SD1_CMD			666
-MX51_PAD_SD1_CLK__AUD5_RXC			667
-MX51_PAD_SD1_CLK__CSPI_SCLK			668
-MX51_PAD_SD1_CLK__SD1_CLK			669
-MX51_PAD_SD1_DATA0__AUD5_TXD			670
-MX51_PAD_SD1_DATA0__CSPI_MISO			671
-MX51_PAD_SD1_DATA0__SD1_DATA0			672
-MX51_PAD_EIM_DA0__EIM_DA0			673
-MX51_PAD_EIM_DA1__EIM_DA1			674
-MX51_PAD_EIM_DA2__EIM_DA2			675
-MX51_PAD_EIM_DA3__EIM_DA3			676
-MX51_PAD_SD1_DATA1__AUD5_RXD			677
-MX51_PAD_SD1_DATA1__SD1_DATA1			678
-MX51_PAD_EIM_DA4__EIM_DA4			679
-MX51_PAD_EIM_DA5__EIM_DA5			680
-MX51_PAD_EIM_DA6__EIM_DA6			681
-MX51_PAD_EIM_DA7__EIM_DA7			682
-MX51_PAD_SD1_DATA2__AUD5_TXC			683
-MX51_PAD_SD1_DATA2__SD1_DATA2			684
-MX51_PAD_EIM_DA10__EIM_DA10			685
-MX51_PAD_EIM_DA11__EIM_DA11			686
-MX51_PAD_EIM_DA8__EIM_DA8			687
-MX51_PAD_EIM_DA9__EIM_DA9			688
-MX51_PAD_SD1_DATA3__AUD5_TXFS			689
-MX51_PAD_SD1_DATA3__CSPI_SS1			690
-MX51_PAD_SD1_DATA3__SD1_DATA3			691
-MX51_PAD_GPIO1_0__CSPI_SS2			692
-MX51_PAD_GPIO1_0__GPIO1_0			693
-MX51_PAD_GPIO1_0__SD1_CD			694
-MX51_PAD_GPIO1_1__CSPI_MISO			695
-MX51_PAD_GPIO1_1__GPIO1_1			696
-MX51_PAD_GPIO1_1__SD1_WP			697
-MX51_PAD_EIM_DA12__EIM_DA12			698
-MX51_PAD_EIM_DA13__EIM_DA13			699
-MX51_PAD_EIM_DA14__EIM_DA14			700
-MX51_PAD_EIM_DA15__EIM_DA15			701
-MX51_PAD_SD2_CMD__CSPI_MOSI			702
-MX51_PAD_SD2_CMD__I2C1_SCL			703
-MX51_PAD_SD2_CMD__SD2_CMD			704
-MX51_PAD_SD2_CLK__CSPI_SCLK			705
-MX51_PAD_SD2_CLK__I2C1_SDA			706
-MX51_PAD_SD2_CLK__SD2_CLK			707
-MX51_PAD_SD2_DATA0__CSPI_MISO			708
-MX51_PAD_SD2_DATA0__SD1_DAT4			709
-MX51_PAD_SD2_DATA0__SD2_DATA0			710
-MX51_PAD_SD2_DATA1__SD1_DAT5			711
-MX51_PAD_SD2_DATA1__SD2_DATA1			712
-MX51_PAD_SD2_DATA1__USBH3_H2_DP			713
-MX51_PAD_SD2_DATA2__SD1_DAT6			714
-MX51_PAD_SD2_DATA2__SD2_DATA2			715
-MX51_PAD_SD2_DATA2__USBH3_H2_DM			716
-MX51_PAD_SD2_DATA3__CSPI_SS2			717
-MX51_PAD_SD2_DATA3__SD1_DAT7			718
-MX51_PAD_SD2_DATA3__SD2_DATA3			719
-MX51_PAD_GPIO1_2__CCM_OUT_2			720
-MX51_PAD_GPIO1_2__GPIO1_2			721
-MX51_PAD_GPIO1_2__I2C2_SCL			722
-MX51_PAD_GPIO1_2__PLL1_BYP			723
-MX51_PAD_GPIO1_2__PWM1_PWMO			724
-MX51_PAD_GPIO1_3__GPIO1_3			725
-MX51_PAD_GPIO1_3__I2C2_SDA			726
-MX51_PAD_GPIO1_3__PLL2_BYP			727
-MX51_PAD_GPIO1_3__PWM2_PWMO			728
-MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ		729
-MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B		730
-MX51_PAD_GPIO1_4__DISP2_EXT_CLK			731
-MX51_PAD_GPIO1_4__EIM_RDY			732
-MX51_PAD_GPIO1_4__GPIO1_4			733
-MX51_PAD_GPIO1_4__WDOG1_WDOG_B			734
-MX51_PAD_GPIO1_5__CSI2_MCLK			735
-MX51_PAD_GPIO1_5__DISP2_PIN16			736
-MX51_PAD_GPIO1_5__GPIO1_5			737
-MX51_PAD_GPIO1_5__WDOG2_WDOG_B			738
-MX51_PAD_GPIO1_6__DISP2_PIN17			739
-MX51_PAD_GPIO1_6__GPIO1_6			740
-MX51_PAD_GPIO1_6__REF_EN_B			741
-MX51_PAD_GPIO1_7__CCM_OUT_0			742
-MX51_PAD_GPIO1_7__GPIO1_7			743
-MX51_PAD_GPIO1_7__SD2_WP			744
-MX51_PAD_GPIO1_7__SPDIF_OUT1			745
-MX51_PAD_GPIO1_8__CSI2_DATA_EN			746
-MX51_PAD_GPIO1_8__GPIO1_8			747
-MX51_PAD_GPIO1_8__SD2_CD			748
-MX51_PAD_GPIO1_8__USBH3_PWR			749
-MX51_PAD_GPIO1_9__CCM_OUT_1			750
-MX51_PAD_GPIO1_9__DISP2_D1_CS			751
-MX51_PAD_GPIO1_9__DISP2_SER_CS			752
-MX51_PAD_GPIO1_9__GPIO1_9			753
-MX51_PAD_GPIO1_9__SD2_LCTL			754
-MX51_PAD_GPIO1_9__USBH3_OC			755
+Refer to imx51-pinfunc.h in device tree source folder for all available
+imx51 PIN_FUNC_ID.

Documentation/devicetree/bindings/pinctrl/fsl,imx53-pinctrl.txt

@@ -28,1175 +28,5 @@ PAD_CTL_DSE_MAX			(3 << 1)
 PAD_CTL_SRE_FAST		(1 << 0)
 PAD_CTL_SRE_SLOW		(0 << 0)
 
-See below for available PIN_FUNC_ID for imx53:
-MX53_PAD_GPIO_19__KPP_COL_5				0
-MX53_PAD_GPIO_19__GPIO4_5				1
-MX53_PAD_GPIO_19__CCM_CLKO				2
-MX53_PAD_GPIO_19__SPDIF_OUT1				3
-MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2			4
-MX53_PAD_GPIO_19__ECSPI1_RDY				5
-MX53_PAD_GPIO_19__FEC_TDATA_3				6
-MX53_PAD_GPIO_19__SRC_INT_BOOT				7
-MX53_PAD_KEY_COL0__KPP_COL_0				8
-MX53_PAD_KEY_COL0__GPIO4_6				9
-MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC			10
-MX53_PAD_KEY_COL0__UART4_TXD_MUX			11
-MX53_PAD_KEY_COL0__ECSPI1_SCLK				12
-MX53_PAD_KEY_COL0__FEC_RDATA_3				13
-MX53_PAD_KEY_COL0__SRC_ANY_PU_RST			14
-MX53_PAD_KEY_ROW0__KPP_ROW_0				15
-MX53_PAD_KEY_ROW0__GPIO4_7				16
-MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD			17
-MX53_PAD_KEY_ROW0__UART4_RXD_MUX			18
-MX53_PAD_KEY_ROW0__ECSPI1_MOSI				19
-MX53_PAD_KEY_ROW0__FEC_TX_ER				20
-MX53_PAD_KEY_COL1__KPP_COL_1				21
-MX53_PAD_KEY_COL1__GPIO4_8				22
-MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS			23
-MX53_PAD_KEY_COL1__UART5_TXD_MUX			24
-MX53_PAD_KEY_COL1__ECSPI1_MISO				25
-MX53_PAD_KEY_COL1__FEC_RX_CLK				26
-MX53_PAD_KEY_COL1__USBPHY1_TXREADY			27
-MX53_PAD_KEY_ROW1__KPP_ROW_1				28
-MX53_PAD_KEY_ROW1__GPIO4_9				29
-MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD			30
-MX53_PAD_KEY_ROW1__UART5_RXD_MUX			31
-MX53_PAD_KEY_ROW1__ECSPI1_SS0				32
-MX53_PAD_KEY_ROW1__FEC_COL				33
-MX53_PAD_KEY_ROW1__USBPHY1_RXVALID			34
-MX53_PAD_KEY_COL2__KPP_COL_2				35
-MX53_PAD_KEY_COL2__GPIO4_10				36
-MX53_PAD_KEY_COL2__CAN1_TXCAN				37
-MX53_PAD_KEY_COL2__FEC_MDIO				38
-MX53_PAD_KEY_COL2__ECSPI1_SS1				39
-MX53_PAD_KEY_COL2__FEC_RDATA_2				40
-MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE			41
-MX53_PAD_KEY_ROW2__KPP_ROW_2				42
-MX53_PAD_KEY_ROW2__GPIO4_11				43
-MX53_PAD_KEY_ROW2__CAN1_RXCAN				44
-MX53_PAD_KEY_ROW2__FEC_MDC				45
-MX53_PAD_KEY_ROW2__ECSPI1_SS2				46
-MX53_PAD_KEY_ROW2__FEC_TDATA_2				47
-MX53_PAD_KEY_ROW2__USBPHY1_RXERROR			48
-MX53_PAD_KEY_COL3__KPP_COL_3				49
-MX53_PAD_KEY_COL3__GPIO4_12				50
-MX53_PAD_KEY_COL3__USBOH3_H2_DP				51
-MX53_PAD_KEY_COL3__SPDIF_IN1				52
-MX53_PAD_KEY_COL3__I2C2_SCL				53
-MX53_PAD_KEY_COL3__ECSPI1_SS3				54
-MX53_PAD_KEY_COL3__FEC_CRS				55
-MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK			56
-MX53_PAD_KEY_ROW3__KPP_ROW_3				57
-MX53_PAD_KEY_ROW3__GPIO4_13				58
-MX53_PAD_KEY_ROW3__USBOH3_H2_DM				59
-MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK			60
-MX53_PAD_KEY_ROW3__I2C2_SDA				61
-MX53_PAD_KEY_ROW3__OSC32K_32K_OUT			62
-MX53_PAD_KEY_ROW3__CCM_PLL4_BYP				63
-MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0			64
-MX53_PAD_KEY_COL4__KPP_COL_4				65
-MX53_PAD_KEY_COL4__GPIO4_14				66
-MX53_PAD_KEY_COL4__CAN2_TXCAN				67
-MX53_PAD_KEY_COL4__IPU_SISG_4				68
-MX53_PAD_KEY_COL4__UART5_RTS				69
-MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC			70
-MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1			71
-MX53_PAD_KEY_ROW4__KPP_ROW_4				72
-MX53_PAD_KEY_ROW4__GPIO4_15				73
-MX53_PAD_KEY_ROW4__CAN2_RXCAN				74
-MX53_PAD_KEY_ROW4__IPU_SISG_5				75
-MX53_PAD_KEY_ROW4__UART5_CTS				76
-MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR			77
-MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID			78
-MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK			79
-MX53_PAD_DI0_DISP_CLK__GPIO4_16				80
-MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR			81
-MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0		82
-MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0			83
-MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID			84
-MX53_PAD_DI0_PIN15__IPU_DI0_PIN15			85
-MX53_PAD_DI0_PIN15__GPIO4_17				86
-MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC			87
-MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1		88
-MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1			89
-MX53_PAD_DI0_PIN15__USBPHY1_BVALID			90
-MX53_PAD_DI0_PIN2__IPU_DI0_PIN2				91
-MX53_PAD_DI0_PIN2__GPIO4_18				92
-MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD			93
-MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2		94
-MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2			95
-MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION			96
-MX53_PAD_DI0_PIN3__IPU_DI0_PIN3				97
-MX53_PAD_DI0_PIN3__GPIO4_19				98
-MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS			99
-MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3		100
-MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3			101
-MX53_PAD_DI0_PIN3__USBPHY1_IDDIG			102
-MX53_PAD_DI0_PIN4__IPU_DI0_PIN4				103
-MX53_PAD_DI0_PIN4__GPIO4_20				104
-MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD			105
-MX53_PAD_DI0_PIN4__ESDHC1_WP				106
-MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD			107
-MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4			108
-MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT		109
-MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0			110
-MX53_PAD_DISP0_DAT0__GPIO4_21				111
-MX53_PAD_DISP0_DAT0__CSPI_SCLK				112
-MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0		113
-MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN		114
-MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5			115
-MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY			116
-MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1			117
-MX53_PAD_DISP0_DAT1__GPIO4_22				118
-MX53_PAD_DISP0_DAT1__CSPI_MOSI				119
-MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1		120
-MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL	121
-MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6			122
-MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID			123
-MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2			124
-MX53_PAD_DISP0_DAT2__GPIO4_23				125
-MX53_PAD_DISP0_DAT2__CSPI_MISO				126
-MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2		127
-MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE			128
-MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7			129
-MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE			130
-MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3			131
-MX53_PAD_DISP0_DAT3__GPIO4_24				132
-MX53_PAD_DISP0_DAT3__CSPI_SS0				133
-MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3		134
-MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR		135
-MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8			136
-MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR			137
-MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4			138
-MX53_PAD_DISP0_DAT4__GPIO4_25				139
-MX53_PAD_DISP0_DAT4__CSPI_SS1				140
-MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4		141
-MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB			142
-MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9			143
-MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK			144
-MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5			145
-MX53_PAD_DISP0_DAT5__GPIO4_26				146
-MX53_PAD_DISP0_DAT5__CSPI_SS2				147
-MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5		148
-MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS		149
-MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10			150
-MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0		151
-MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6			152
-MX53_PAD_DISP0_DAT6__GPIO4_27				153
-MX53_PAD_DISP0_DAT6__CSPI_SS3				154
-MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6		155
-MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE		156
-MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11			157
-MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1		158
-MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7			159
-MX53_PAD_DISP0_DAT7__GPIO4_28				160
-MX53_PAD_DISP0_DAT7__CSPI_RDY				161
-MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7		162
-MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0		163
-MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12			164
-MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID			165
-MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8			166
-MX53_PAD_DISP0_DAT8__GPIO4_29				167
-MX53_PAD_DISP0_DAT8__PWM1_PWMO				168
-MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B			169
-MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1		170
-MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13			171
-MX53_PAD_DISP0_DAT8__USBPHY2_AVALID			172
-MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9			173
-MX53_PAD_DISP0_DAT9__GPIO4_30				174
-MX53_PAD_DISP0_DAT9__PWM2_PWMO				175
-MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B			176
-MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2		177
-MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14			178
-MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0			179
-MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10			180
-MX53_PAD_DISP0_DAT10__GPIO4_31				181
-MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP			182
-MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3	183
-MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15			184
-MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1			185
-MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11			186
-MX53_PAD_DISP0_DAT11__GPIO5_5				187
-MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT			188
-MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4	189
-MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16			190
-MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2			191
-MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12			192
-MX53_PAD_DISP0_DAT12__GPIO5_6				193
-MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK			194
-MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5	195
-MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17			196
-MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3			197
-MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13			198
-MX53_PAD_DISP0_DAT13__GPIO5_7				199
-MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS			200
-MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0	201
-MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18			202
-MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4			203
-MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14			204
-MX53_PAD_DISP0_DAT14__GPIO5_8				205
-MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC			206
-MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1	207
-MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19			208
-MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5			209
-MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15			210
-MX53_PAD_DISP0_DAT15__GPIO5_9				211
-MX53_PAD_DISP0_DAT15__ECSPI1_SS1			212
-MX53_PAD_DISP0_DAT15__ECSPI2_SS1			213
-MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2	214
-MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20			215
-MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6			216
-MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16			217
-MX53_PAD_DISP0_DAT16__GPIO5_10				218
-MX53_PAD_DISP0_DAT16__ECSPI2_MOSI			219
-MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC			220
-MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0			221
-MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3	222
-MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21			223
-MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7			224
-MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17			225
-MX53_PAD_DISP0_DAT17__GPIO5_11				226
-MX53_PAD_DISP0_DAT17__ECSPI2_MISO			227
-MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD			228
-MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1			229
-MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4	230
-MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22			231
-MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18			232
-MX53_PAD_DISP0_DAT18__GPIO5_12				233
-MX53_PAD_DISP0_DAT18__ECSPI2_SS0			234
-MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS			235
-MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS			236
-MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5	237
-MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23			238
-MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2			239
-MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19			240
-MX53_PAD_DISP0_DAT19__GPIO5_13				241
-MX53_PAD_DISP0_DAT19__ECSPI2_SCLK			242
-MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD			243
-MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC			244
-MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6	245
-MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24			246
-MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3			247
-MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20			248
-MX53_PAD_DISP0_DAT20__GPIO5_14				249
-MX53_PAD_DISP0_DAT20__ECSPI1_SCLK			250
-MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC			251
-MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7	252
-MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25			253
-MX53_PAD_DISP0_DAT20__SATA_PHY_TDI			254
-MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21			255
-MX53_PAD_DISP0_DAT21__GPIO5_15				256
-MX53_PAD_DISP0_DAT21__ECSPI1_MOSI			257
-MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD			258
-MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0		259
-MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26			260
-MX53_PAD_DISP0_DAT21__SATA_PHY_TDO			261
-MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22			262
-MX53_PAD_DISP0_DAT22__GPIO5_16				263
-MX53_PAD_DISP0_DAT22__ECSPI1_MISO			264
-MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS			265
-MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1		266
-MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27			267
-MX53_PAD_DISP0_DAT22__SATA_PHY_TCK			268
-MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23			269
-MX53_PAD_DISP0_DAT23__GPIO5_17				270
-MX53_PAD_DISP0_DAT23__ECSPI1_SS0			271
-MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD			272
-MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2		273
-MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28			274
-MX53_PAD_DISP0_DAT23__SATA_PHY_TMS			275
-MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK			276
-MX53_PAD_CSI0_PIXCLK__GPIO5_18				277
-MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0			278
-MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29			279
-MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC			280
-MX53_PAD_CSI0_MCLK__GPIO5_19				281
-MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK			282
-MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1			283
-MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30			284
-MX53_PAD_CSI0_MCLK__TPIU_TRCTL				285
-MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN			286
-MX53_PAD_CSI0_DATA_EN__GPIO5_20				287
-MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2			288
-MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31			289
-MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK			290
-MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC			291
-MX53_PAD_CSI0_VSYNC__GPIO5_21				292
-MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3			293
-MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32			294
-MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0			295
-MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4			296
-MX53_PAD_CSI0_DAT4__GPIO5_22				297
-MX53_PAD_CSI0_DAT4__KPP_COL_5				298
-MX53_PAD_CSI0_DAT4__ECSPI1_SCLK				299
-MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP			300
-MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC			301
-MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33			302
-MX53_PAD_CSI0_DAT4__TPIU_TRACE_1			303
-MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5			304
-MX53_PAD_CSI0_DAT5__GPIO5_23				305
-MX53_PAD_CSI0_DAT5__KPP_ROW_5				306
-MX53_PAD_CSI0_DAT5__ECSPI1_MOSI				307
-MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT			308
-MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD			309
-MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34			310
-MX53_PAD_CSI0_DAT5__TPIU_TRACE_2			311
-MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6			312
-MX53_PAD_CSI0_DAT6__GPIO5_24				313
-MX53_PAD_CSI0_DAT6__KPP_COL_6				314
-MX53_PAD_CSI0_DAT6__ECSPI1_MISO				315
-MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK			316
-MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS			317
-MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35			318
-MX53_PAD_CSI0_DAT6__TPIU_TRACE_3			319
-MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7			320
-MX53_PAD_CSI0_DAT7__GPIO5_25				321
-MX53_PAD_CSI0_DAT7__KPP_ROW_6				322
-MX53_PAD_CSI0_DAT7__ECSPI1_SS0				323
-MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR			324
-MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD			325
-MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36			326
-MX53_PAD_CSI0_DAT7__TPIU_TRACE_4			327
-MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8			328
-MX53_PAD_CSI0_DAT8__GPIO5_26				329
-MX53_PAD_CSI0_DAT8__KPP_COL_7				330
-MX53_PAD_CSI0_DAT8__ECSPI2_SCLK				331
-MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC			332
-MX53_PAD_CSI0_DAT8__I2C1_SDA				333
-MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37			334
-MX53_PAD_CSI0_DAT8__TPIU_TRACE_5			335
-MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9			336
-MX53_PAD_CSI0_DAT9__GPIO5_27				337
-MX53_PAD_CSI0_DAT9__KPP_ROW_7				338
-MX53_PAD_CSI0_DAT9__ECSPI2_MOSI				339
-MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR			340
-MX53_PAD_CSI0_DAT9__I2C1_SCL				341
-MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38			342
-MX53_PAD_CSI0_DAT9__TPIU_TRACE_6			343
-MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10			344
-MX53_PAD_CSI0_DAT10__GPIO5_28				345
-MX53_PAD_CSI0_DAT10__UART1_TXD_MUX			346
-MX53_PAD_CSI0_DAT10__ECSPI2_MISO			347
-MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC			348
-MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4			349
-MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39			350
-MX53_PAD_CSI0_DAT10__TPIU_TRACE_7			351
-MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11			352
-MX53_PAD_CSI0_DAT11__GPIO5_29				353
-MX53_PAD_CSI0_DAT11__UART1_RXD_MUX			354
-MX53_PAD_CSI0_DAT11__ECSPI2_SS0				355
-MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS			356
-MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5			357
-MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40			358
-MX53_PAD_CSI0_DAT11__TPIU_TRACE_8			359
-MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12			360
-MX53_PAD_CSI0_DAT12__GPIO5_30				361
-MX53_PAD_CSI0_DAT12__UART4_TXD_MUX			362
-MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0		363
-MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6			364
-MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41			365
-MX53_PAD_CSI0_DAT12__TPIU_TRACE_9			366
-MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13			367
-MX53_PAD_CSI0_DAT13__GPIO5_31				368
-MX53_PAD_CSI0_DAT13__UART4_RXD_MUX			369
-MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1		370
-MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7			371
-MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42			372
-MX53_PAD_CSI0_DAT13__TPIU_TRACE_10			373
-MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14			374
-MX53_PAD_CSI0_DAT14__GPIO6_0				375
-MX53_PAD_CSI0_DAT14__UART5_TXD_MUX			376
-MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2		377
-MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8			378
-MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43			379
-MX53_PAD_CSI0_DAT14__TPIU_TRACE_11			380
-MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15			381
-MX53_PAD_CSI0_DAT15__GPIO6_1				382
-MX53_PAD_CSI0_DAT15__UART5_RXD_MUX			383
-MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3		384
-MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9			385
-MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44			386
-MX53_PAD_CSI0_DAT15__TPIU_TRACE_12			387
-MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16			388
-MX53_PAD_CSI0_DAT16__GPIO6_2				389
-MX53_PAD_CSI0_DAT16__UART4_RTS				390
-MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4		391
-MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10			392
-MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45			393
-MX53_PAD_CSI0_DAT16__TPIU_TRACE_13			394
-MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17			395
-MX53_PAD_CSI0_DAT17__GPIO6_3				396
-MX53_PAD_CSI0_DAT17__UART4_CTS				397
-MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5		398
-MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11			399
-MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46			400
-MX53_PAD_CSI0_DAT17__TPIU_TRACE_14			401
-MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18			402
-MX53_PAD_CSI0_DAT18__GPIO6_4				403
-MX53_PAD_CSI0_DAT18__UART5_RTS				404
-MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6		405
-MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12			406
-MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47			407
-MX53_PAD_CSI0_DAT18__TPIU_TRACE_15			408
-MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19			409
-MX53_PAD_CSI0_DAT19__GPIO6_5				410
-MX53_PAD_CSI0_DAT19__UART5_CTS				411
-MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7		412
-MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13			413
-MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48			414
-MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK			415
-MX53_PAD_EIM_A25__EMI_WEIM_A_25				416
-MX53_PAD_EIM_A25__GPIO5_2				417
-MX53_PAD_EIM_A25__ECSPI2_RDY				418
-MX53_PAD_EIM_A25__IPU_DI1_PIN12				419
-MX53_PAD_EIM_A25__CSPI_SS1				420
-MX53_PAD_EIM_A25__IPU_DI0_D1_CS				421
-MX53_PAD_EIM_A25__USBPHY1_BISTOK			422
-MX53_PAD_EIM_EB2__EMI_WEIM_EB_2				423
-MX53_PAD_EIM_EB2__GPIO2_30				424
-MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK			425
-MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS			426
-MX53_PAD_EIM_EB2__ECSPI1_SS0				427
-MX53_PAD_EIM_EB2__I2C2_SCL				428
-MX53_PAD_EIM_D16__EMI_WEIM_D_16				429
-MX53_PAD_EIM_D16__GPIO3_16				430
-MX53_PAD_EIM_D16__IPU_DI0_PIN5				431
-MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK			432
-MX53_PAD_EIM_D16__ECSPI1_SCLK				433
-MX53_PAD_EIM_D16__I2C2_SDA				434
-MX53_PAD_EIM_D17__EMI_WEIM_D_17				435
-MX53_PAD_EIM_D17__GPIO3_17				436
-MX53_PAD_EIM_D17__IPU_DI0_PIN6				437
-MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN			438
-MX53_PAD_EIM_D17__ECSPI1_MISO				439
-MX53_PAD_EIM_D17__I2C3_SCL				440
-MX53_PAD_EIM_D18__EMI_WEIM_D_18				441
-MX53_PAD_EIM_D18__GPIO3_18				442
-MX53_PAD_EIM_D18__IPU_DI0_PIN7				443
-MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO			444
-MX53_PAD_EIM_D18__ECSPI1_MOSI				445
-MX53_PAD_EIM_D18__I2C3_SDA				446
-MX53_PAD_EIM_D18__IPU_DI1_D0_CS				447
-MX53_PAD_EIM_D19__EMI_WEIM_D_19				448
-MX53_PAD_EIM_D19__GPIO3_19				449
-MX53_PAD_EIM_D19__IPU_DI0_PIN8				450
-MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS			451
-MX53_PAD_EIM_D19__ECSPI1_SS1				452
-MX53_PAD_EIM_D19__EPIT1_EPITO				453
-MX53_PAD_EIM_D19__UART1_CTS				454
-MX53_PAD_EIM_D19__USBOH3_USBH2_OC			455
-MX53_PAD_EIM_D20__EMI_WEIM_D_20				456
-MX53_PAD_EIM_D20__GPIO3_20				457
-MX53_PAD_EIM_D20__IPU_DI0_PIN16				458
-MX53_PAD_EIM_D20__IPU_SER_DISP0_CS			459
-MX53_PAD_EIM_D20__CSPI_SS0				460
-MX53_PAD_EIM_D20__EPIT2_EPITO				461
-MX53_PAD_EIM_D20__UART1_RTS				462
-MX53_PAD_EIM_D20__USBOH3_USBH2_PWR			463
-MX53_PAD_EIM_D21__EMI_WEIM_D_21				464
-MX53_PAD_EIM_D21__GPIO3_21				465
-MX53_PAD_EIM_D21__IPU_DI0_PIN17				466
-MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK			467
-MX53_PAD_EIM_D21__CSPI_SCLK				468
-MX53_PAD_EIM_D21__I2C1_SCL				469
-MX53_PAD_EIM_D21__USBOH3_USBOTG_OC			470
-MX53_PAD_EIM_D22__EMI_WEIM_D_22				471
-MX53_PAD_EIM_D22__GPIO3_22				472
-MX53_PAD_EIM_D22__IPU_DI0_PIN1				473
-MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN			474
-MX53_PAD_EIM_D22__CSPI_MISO				475
-MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR			476
-MX53_PAD_EIM_D23__EMI_WEIM_D_23				477
-MX53_PAD_EIM_D23__GPIO3_23				478
-MX53_PAD_EIM_D23__UART3_CTS				479
-MX53_PAD_EIM_D23__UART1_DCD				480
-MX53_PAD_EIM_D23__IPU_DI0_D0_CS				481
-MX53_PAD_EIM_D23__IPU_DI1_PIN2				482
-MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN			483
-MX53_PAD_EIM_D23__IPU_DI1_PIN14				484
-MX53_PAD_EIM_EB3__EMI_WEIM_EB_3				485
-MX53_PAD_EIM_EB3__GPIO2_31				486
-MX53_PAD_EIM_EB3__UART3_RTS				487
-MX53_PAD_EIM_EB3__UART1_RI				488
-MX53_PAD_EIM_EB3__IPU_DI1_PIN3				489
-MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC			490
-MX53_PAD_EIM_EB3__IPU_DI1_PIN16				491
-MX53_PAD_EIM_D24__EMI_WEIM_D_24				492
-MX53_PAD_EIM_D24__GPIO3_24				493
-MX53_PAD_EIM_D24__UART3_TXD_MUX				494
-MX53_PAD_EIM_D24__ECSPI1_SS2				495
-MX53_PAD_EIM_D24__CSPI_SS2				496
-MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS			497
-MX53_PAD_EIM_D24__ECSPI2_SS2				498
-MX53_PAD_EIM_D24__UART1_DTR				499
-MX53_PAD_EIM_D25__EMI_WEIM_D_25				500
-MX53_PAD_EIM_D25__GPIO3_25				501
-MX53_PAD_EIM_D25__UART3_RXD_MUX				502
-MX53_PAD_EIM_D25__ECSPI1_SS3				503
-MX53_PAD_EIM_D25__CSPI_SS3				504
-MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC			505
-MX53_PAD_EIM_D25__ECSPI2_SS3				506
-MX53_PAD_EIM_D25__UART1_DSR				507
-MX53_PAD_EIM_D26__EMI_WEIM_D_26				508
-MX53_PAD_EIM_D26__GPIO3_26				509
-MX53_PAD_EIM_D26__UART2_TXD_MUX				510
-MX53_PAD_EIM_D26__FIRI_RXD				511
-MX53_PAD_EIM_D26__IPU_CSI0_D_1				512
-MX53_PAD_EIM_D26__IPU_DI1_PIN11				513
-MX53_PAD_EIM_D26__IPU_SISG_2				514
-MX53_PAD_EIM_D26__IPU_DISP1_DAT_22			515
-MX53_PAD_EIM_D27__EMI_WEIM_D_27				516
-MX53_PAD_EIM_D27__GPIO3_27				517
-MX53_PAD_EIM_D27__UART2_RXD_MUX				518
-MX53_PAD_EIM_D27__FIRI_TXD				519
-MX53_PAD_EIM_D27__IPU_CSI0_D_0				520
-MX53_PAD_EIM_D27__IPU_DI1_PIN13				521
-MX53_PAD_EIM_D27__IPU_SISG_3				522
-MX53_PAD_EIM_D27__IPU_DISP1_DAT_23			523
-MX53_PAD_EIM_D28__EMI_WEIM_D_28				524
-MX53_PAD_EIM_D28__GPIO3_28				525
-MX53_PAD_EIM_D28__UART2_CTS				526
-MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO			527
-MX53_PAD_EIM_D28__CSPI_MOSI				528
-MX53_PAD_EIM_D28__I2C1_SDA				529
-MX53_PAD_EIM_D28__IPU_EXT_TRIG				530
-MX53_PAD_EIM_D28__IPU_DI0_PIN13				531
-MX53_PAD_EIM_D29__EMI_WEIM_D_29				532
-MX53_PAD_EIM_D29__GPIO3_29				533
-MX53_PAD_EIM_D29__UART2_RTS				534
-MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS			535
-MX53_PAD_EIM_D29__CSPI_SS0				536
-MX53_PAD_EIM_D29__IPU_DI1_PIN15				537
-MX53_PAD_EIM_D29__IPU_CSI1_VSYNC			538
-MX53_PAD_EIM_D29__IPU_DI0_PIN14				539
-MX53_PAD_EIM_D30__EMI_WEIM_D_30				540
-MX53_PAD_EIM_D30__GPIO3_30				541
-MX53_PAD_EIM_D30__UART3_CTS				542
-MX53_PAD_EIM_D30__IPU_CSI0_D_3				543
-MX53_PAD_EIM_D30__IPU_DI0_PIN11				544
-MX53_PAD_EIM_D30__IPU_DISP1_DAT_21			545
-MX53_PAD_EIM_D30__USBOH3_USBH1_OC			546
-MX53_PAD_EIM_D30__USBOH3_USBH2_OC			547
-MX53_PAD_EIM_D31__EMI_WEIM_D_31				548
-MX53_PAD_EIM_D31__GPIO3_31				549
-MX53_PAD_EIM_D31__UART3_RTS				550
-MX53_PAD_EIM_D31__IPU_CSI0_D_2				551
-MX53_PAD_EIM_D31__IPU_DI0_PIN12				552
-MX53_PAD_EIM_D31__IPU_DISP1_DAT_20			553
-MX53_PAD_EIM_D31__USBOH3_USBH1_PWR			554
-MX53_PAD_EIM_D31__USBOH3_USBH2_PWR			555
-MX53_PAD_EIM_A24__EMI_WEIM_A_24				556
-MX53_PAD_EIM_A24__GPIO5_4				557
-MX53_PAD_EIM_A24__IPU_DISP1_DAT_19			558
-MX53_PAD_EIM_A24__IPU_CSI1_D_19				559
-MX53_PAD_EIM_A24__IPU_SISG_2				560
-MX53_PAD_EIM_A24__USBPHY2_BVALID			561
-MX53_PAD_EIM_A23__EMI_WEIM_A_23				562
-MX53_PAD_EIM_A23__GPIO6_6				563
-MX53_PAD_EIM_A23__IPU_DISP1_DAT_18			564
-MX53_PAD_EIM_A23__IPU_CSI1_D_18				565
-MX53_PAD_EIM_A23__IPU_SISG_3				566
-MX53_PAD_EIM_A23__USBPHY2_ENDSESSION			567
-MX53_PAD_EIM_A22__EMI_WEIM_A_22				568
-MX53_PAD_EIM_A22__GPIO2_16				569
-MX53_PAD_EIM_A22__IPU_DISP1_DAT_17			570
-MX53_PAD_EIM_A22__IPU_CSI1_D_17				571
-MX53_PAD_EIM_A22__SRC_BT_CFG1_7				572
-MX53_PAD_EIM_A21__EMI_WEIM_A_21				573
-MX53_PAD_EIM_A21__GPIO2_17				574
-MX53_PAD_EIM_A21__IPU_DISP1_DAT_16			575
-MX53_PAD_EIM_A21__IPU_CSI1_D_16				576
-MX53_PAD_EIM_A21__SRC_BT_CFG1_6				577
-MX53_PAD_EIM_A20__EMI_WEIM_A_20				578
-MX53_PAD_EIM_A20__GPIO2_18				579
-MX53_PAD_EIM_A20__IPU_DISP1_DAT_15			580
-MX53_PAD_EIM_A20__IPU_CSI1_D_15				581
-MX53_PAD_EIM_A20__SRC_BT_CFG1_5				582
-MX53_PAD_EIM_A19__EMI_WEIM_A_19				583
-MX53_PAD_EIM_A19__GPIO2_19				584
-MX53_PAD_EIM_A19__IPU_DISP1_DAT_14			585
-MX53_PAD_EIM_A19__IPU_CSI1_D_14				586
-MX53_PAD_EIM_A19__SRC_BT_CFG1_4				587
-MX53_PAD_EIM_A18__EMI_WEIM_A_18				588
-MX53_PAD_EIM_A18__GPIO2_20				589
-MX53_PAD_EIM_A18__IPU_DISP1_DAT_13			590
-MX53_PAD_EIM_A18__IPU_CSI1_D_13				591
-MX53_PAD_EIM_A18__SRC_BT_CFG1_3				592
-MX53_PAD_EIM_A17__EMI_WEIM_A_17				593
-MX53_PAD_EIM_A17__GPIO2_21				594
-MX53_PAD_EIM_A17__IPU_DISP1_DAT_12			595
-MX53_PAD_EIM_A17__IPU_CSI1_D_12				596
-MX53_PAD_EIM_A17__SRC_BT_CFG1_2				597
-MX53_PAD_EIM_A16__EMI_WEIM_A_16				598
-MX53_PAD_EIM_A16__GPIO2_22				599
-MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK			600
-MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK			601
-MX53_PAD_EIM_A16__SRC_BT_CFG1_1				602
-MX53_PAD_EIM_CS0__EMI_WEIM_CS_0				603
-MX53_PAD_EIM_CS0__GPIO2_23				604
-MX53_PAD_EIM_CS0__ECSPI2_SCLK				605
-MX53_PAD_EIM_CS0__IPU_DI1_PIN5				606
-MX53_PAD_EIM_CS1__EMI_WEIM_CS_1				607
-MX53_PAD_EIM_CS1__GPIO2_24				608
-MX53_PAD_EIM_CS1__ECSPI2_MOSI				609
-MX53_PAD_EIM_CS1__IPU_DI1_PIN6				610
-MX53_PAD_EIM_OE__EMI_WEIM_OE				611
-MX53_PAD_EIM_OE__GPIO2_25				612
-MX53_PAD_EIM_OE__ECSPI2_MISO				613
-MX53_PAD_EIM_OE__IPU_DI1_PIN7				614
-MX53_PAD_EIM_OE__USBPHY2_IDDIG				615
-MX53_PAD_EIM_RW__EMI_WEIM_RW				616
-MX53_PAD_EIM_RW__GPIO2_26				617
-MX53_PAD_EIM_RW__ECSPI2_SS0				618
-MX53_PAD_EIM_RW__IPU_DI1_PIN8				619
-MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT			620
-MX53_PAD_EIM_LBA__EMI_WEIM_LBA				621
-MX53_PAD_EIM_LBA__GPIO2_27				622
-MX53_PAD_EIM_LBA__ECSPI2_SS1				623
-MX53_PAD_EIM_LBA__IPU_DI1_PIN17				624
-MX53_PAD_EIM_LBA__SRC_BT_CFG1_0				625
-MX53_PAD_EIM_EB0__EMI_WEIM_EB_0				626
-MX53_PAD_EIM_EB0__GPIO2_28				627
-MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11			628
-MX53_PAD_EIM_EB0__IPU_CSI1_D_11				629
-MX53_PAD_EIM_EB0__GPC_PMIC_RDY				630
-MX53_PAD_EIM_EB0__SRC_BT_CFG2_7				631
-MX53_PAD_EIM_EB1__EMI_WEIM_EB_1				632
-MX53_PAD_EIM_EB1__GPIO2_29				633
-MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10			634
-MX53_PAD_EIM_EB1__IPU_CSI1_D_10				635
-MX53_PAD_EIM_EB1__SRC_BT_CFG2_6				636
-MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0			637
-MX53_PAD_EIM_DA0__GPIO3_0				638
-MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9			639
-MX53_PAD_EIM_DA0__IPU_CSI1_D_9				640
-MX53_PAD_EIM_DA0__SRC_BT_CFG2_5				641
-MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1			642
-MX53_PAD_EIM_DA1__GPIO3_1				643
-MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8			644
-MX53_PAD_EIM_DA1__IPU_CSI1_D_8				645
-MX53_PAD_EIM_DA1__SRC_BT_CFG2_4				646
-MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2			647
-MX53_PAD_EIM_DA2__GPIO3_2				648
-MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7			649
-MX53_PAD_EIM_DA2__IPU_CSI1_D_7				650
-MX53_PAD_EIM_DA2__SRC_BT_CFG2_3				651
-MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3			652
-MX53_PAD_EIM_DA3__GPIO3_3				653
-MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6			654
-MX53_PAD_EIM_DA3__IPU_CSI1_D_6				655
-MX53_PAD_EIM_DA3__SRC_BT_CFG2_2				656
-MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4			657
-MX53_PAD_EIM_DA4__GPIO3_4				658
-MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5			659
-MX53_PAD_EIM_DA4__IPU_CSI1_D_5				660
-MX53_PAD_EIM_DA4__SRC_BT_CFG3_7				661
-MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5			662
-MX53_PAD_EIM_DA5__GPIO3_5				663
-MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4			664
-MX53_PAD_EIM_DA5__IPU_CSI1_D_4				665
-MX53_PAD_EIM_DA5__SRC_BT_CFG3_6				666
-MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6			667
-MX53_PAD_EIM_DA6__GPIO3_6				668
-MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3			669
-MX53_PAD_EIM_DA6__IPU_CSI1_D_3				670
-MX53_PAD_EIM_DA6__SRC_BT_CFG3_5				671
-MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7			672
-MX53_PAD_EIM_DA7__GPIO3_7				673
-MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2			674
-MX53_PAD_EIM_DA7__IPU_CSI1_D_2				675
-MX53_PAD_EIM_DA7__SRC_BT_CFG3_4				676
-MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8			677
-MX53_PAD_EIM_DA8__GPIO3_8				678
-MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1			679
-MX53_PAD_EIM_DA8__IPU_CSI1_D_1				680
-MX53_PAD_EIM_DA8__SRC_BT_CFG3_3				681
-MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9			682
-MX53_PAD_EIM_DA9__GPIO3_9				683
-MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0			684
-MX53_PAD_EIM_DA9__IPU_CSI1_D_0				685
-MX53_PAD_EIM_DA9__SRC_BT_CFG3_2				686
-MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10			687
-MX53_PAD_EIM_DA10__GPIO3_10				688
-MX53_PAD_EIM_DA10__IPU_DI1_PIN15			689
-MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN			690
-MX53_PAD_EIM_DA10__SRC_BT_CFG3_1			691
-MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11			692
-MX53_PAD_EIM_DA11__GPIO3_11				693
-MX53_PAD_EIM_DA11__IPU_DI1_PIN2				694
-MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC			695
-MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12			696
-MX53_PAD_EIM_DA12__GPIO3_12				697
-MX53_PAD_EIM_DA12__IPU_DI1_PIN3				698
-MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC			699
-MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13			700
-MX53_PAD_EIM_DA13__GPIO3_13				701
-MX53_PAD_EIM_DA13__IPU_DI1_D0_CS			702
-MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK			703
-MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14			704
-MX53_PAD_EIM_DA14__GPIO3_14				705
-MX53_PAD_EIM_DA14__IPU_DI1_D1_CS			706
-MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK			707
-MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15			708
-MX53_PAD_EIM_DA15__GPIO3_15				709
-MX53_PAD_EIM_DA15__IPU_DI1_PIN1				710
-MX53_PAD_EIM_DA15__IPU_DI1_PIN4				711
-MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B			712
-MX53_PAD_NANDF_WE_B__GPIO6_12				713
-MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B			714
-MX53_PAD_NANDF_RE_B__GPIO6_13				715
-MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT			716
-MX53_PAD_EIM_WAIT__GPIO5_0				717
-MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B			718
-MX53_PAD_LVDS1_TX3_P__GPIO6_22				719
-MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3			720
-MX53_PAD_LVDS1_TX2_P__GPIO6_24				721
-MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2			722
-MX53_PAD_LVDS1_CLK_P__GPIO6_26				723
-MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK			724
-MX53_PAD_LVDS1_TX1_P__GPIO6_28				725
-MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1			726
-MX53_PAD_LVDS1_TX0_P__GPIO6_30				727
-MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0			728
-MX53_PAD_LVDS0_TX3_P__GPIO7_22				729
-MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3			730
-MX53_PAD_LVDS0_CLK_P__GPIO7_24				731
-MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK			732
-MX53_PAD_LVDS0_TX2_P__GPIO7_26				733
-MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2			734
-MX53_PAD_LVDS0_TX1_P__GPIO7_28				735
-MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1			736
-MX53_PAD_LVDS0_TX0_P__GPIO7_30				737
-MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0			738
-MX53_PAD_GPIO_10__GPIO4_0				739
-MX53_PAD_GPIO_10__OSC32k_32K_OUT			740
-MX53_PAD_GPIO_11__GPIO4_1				741
-MX53_PAD_GPIO_12__GPIO4_2				742
-MX53_PAD_GPIO_13__GPIO4_3				743
-MX53_PAD_GPIO_14__GPIO4_4				744
-MX53_PAD_NANDF_CLE__EMI_NANDF_CLE			745
-MX53_PAD_NANDF_CLE__GPIO6_7				746
-MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0			747
-MX53_PAD_NANDF_ALE__EMI_NANDF_ALE			748
-MX53_PAD_NANDF_ALE__GPIO6_8				749
-MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1			750
-MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B			751
-MX53_PAD_NANDF_WP_B__GPIO6_9				752
-MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2			753
-MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0			754
-MX53_PAD_NANDF_RB0__GPIO6_10				755
-MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3			756
-MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0			757
-MX53_PAD_NANDF_CS0__GPIO6_11				758
-MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4			759
-MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1			760
-MX53_PAD_NANDF_CS1__GPIO6_14				761
-MX53_PAD_NANDF_CS1__MLB_MLBCLK				762
-MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5			763
-MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2			764
-MX53_PAD_NANDF_CS2__GPIO6_15				765
-MX53_PAD_NANDF_CS2__IPU_SISG_0				766
-MX53_PAD_NANDF_CS2__ESAI1_TX0				767
-MX53_PAD_NANDF_CS2__EMI_WEIM_CRE			768
-MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK			769
-MX53_PAD_NANDF_CS2__MLB_MLBSIG				770
-MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6			771
-MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3			772
-MX53_PAD_NANDF_CS3__GPIO6_16				773
-MX53_PAD_NANDF_CS3__IPU_SISG_1				774
-MX53_PAD_NANDF_CS3__ESAI1_TX1				775
-MX53_PAD_NANDF_CS3__EMI_WEIM_A_26			776
-MX53_PAD_NANDF_CS3__MLB_MLBDAT				777
-MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7			778
-MX53_PAD_FEC_MDIO__FEC_MDIO				779
-MX53_PAD_FEC_MDIO__GPIO1_22				780
-MX53_PAD_FEC_MDIO__ESAI1_SCKR				781
-MX53_PAD_FEC_MDIO__FEC_COL				782
-MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2			783
-MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3		784
-MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49			785
-MX53_PAD_FEC_REF_CLK__FEC_TX_CLK			786
-MX53_PAD_FEC_REF_CLK__GPIO1_23				787
-MX53_PAD_FEC_REF_CLK__ESAI1_FSR				788
-MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4		789
-MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50			790
-MX53_PAD_FEC_RX_ER__FEC_RX_ER				791
-MX53_PAD_FEC_RX_ER__GPIO1_24				792
-MX53_PAD_FEC_RX_ER__ESAI1_HCKR				793
-MX53_PAD_FEC_RX_ER__FEC_RX_CLK				794
-MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3			795
-MX53_PAD_FEC_CRS_DV__FEC_RX_DV				796
-MX53_PAD_FEC_CRS_DV__GPIO1_25				797
-MX53_PAD_FEC_CRS_DV__ESAI1_SCKT				798
-MX53_PAD_FEC_RXD1__FEC_RDATA_1				799
-MX53_PAD_FEC_RXD1__GPIO1_26				800
-MX53_PAD_FEC_RXD1__ESAI1_FST				801
-MX53_PAD_FEC_RXD1__MLB_MLBSIG				802
-MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1			803
-MX53_PAD_FEC_RXD0__FEC_RDATA_0				804
-MX53_PAD_FEC_RXD0__GPIO1_27				805
-MX53_PAD_FEC_RXD0__ESAI1_HCKT				806
-MX53_PAD_FEC_RXD0__OSC32k_32K_OUT			807
-MX53_PAD_FEC_TX_EN__FEC_TX_EN				808
-MX53_PAD_FEC_TX_EN__GPIO1_28				809
-MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2			810
-MX53_PAD_FEC_TXD1__FEC_TDATA_1				811
-MX53_PAD_FEC_TXD1__GPIO1_29				812
-MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3			813
-MX53_PAD_FEC_TXD1__MLB_MLBCLK				814
-MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK			815
-MX53_PAD_FEC_TXD0__FEC_TDATA_0				816
-MX53_PAD_FEC_TXD0__GPIO1_30				817
-MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1			818
-MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0			819
-MX53_PAD_FEC_MDC__FEC_MDC				820
-MX53_PAD_FEC_MDC__GPIO1_31				821
-MX53_PAD_FEC_MDC__ESAI1_TX5_RX0				822
-MX53_PAD_FEC_MDC__MLB_MLBDAT				823
-MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG		824
-MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1			825
-MX53_PAD_PATA_DIOW__PATA_DIOW				826
-MX53_PAD_PATA_DIOW__GPIO6_17				827
-MX53_PAD_PATA_DIOW__UART1_TXD_MUX			828
-MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2			829
-MX53_PAD_PATA_DMACK__PATA_DMACK				830
-MX53_PAD_PATA_DMACK__GPIO6_18				831
-MX53_PAD_PATA_DMACK__UART1_RXD_MUX			832
-MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3			833
-MX53_PAD_PATA_DMARQ__PATA_DMARQ				834
-MX53_PAD_PATA_DMARQ__GPIO7_0				835
-MX53_PAD_PATA_DMARQ__UART2_TXD_MUX			836
-MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0			837
-MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4			838
-MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN			839
-MX53_PAD_PATA_BUFFER_EN__GPIO7_1			840
-MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX			841
-MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1			842
-MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5		843
-MX53_PAD_PATA_INTRQ__PATA_INTRQ				844
-MX53_PAD_PATA_INTRQ__GPIO7_2				845
-MX53_PAD_PATA_INTRQ__UART2_CTS				846
-MX53_PAD_PATA_INTRQ__CAN1_TXCAN				847
-MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2			848
-MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6			849
-MX53_PAD_PATA_DIOR__PATA_DIOR				850
-MX53_PAD_PATA_DIOR__GPIO7_3				851
-MX53_PAD_PATA_DIOR__UART2_RTS				852
-MX53_PAD_PATA_DIOR__CAN1_RXCAN				853
-MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7			854
-MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B		855
-MX53_PAD_PATA_RESET_B__GPIO7_4				856
-MX53_PAD_PATA_RESET_B__ESDHC3_CMD			857
-MX53_PAD_PATA_RESET_B__UART1_CTS			858
-MX53_PAD_PATA_RESET_B__CAN2_TXCAN			859
-MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0		860
-MX53_PAD_PATA_IORDY__PATA_IORDY				861
-MX53_PAD_PATA_IORDY__GPIO7_5				862
-MX53_PAD_PATA_IORDY__ESDHC3_CLK				863
-MX53_PAD_PATA_IORDY__UART1_RTS				864
-MX53_PAD_PATA_IORDY__CAN2_RXCAN				865
-MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1			866
-MX53_PAD_PATA_DA_0__PATA_DA_0				867
-MX53_PAD_PATA_DA_0__GPIO7_6				868
-MX53_PAD_PATA_DA_0__ESDHC3_RST				869
-MX53_PAD_PATA_DA_0__OWIRE_LINE				870
-MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2			871
-MX53_PAD_PATA_DA_1__PATA_DA_1				872
-MX53_PAD_PATA_DA_1__GPIO7_7				873
-MX53_PAD_PATA_DA_1__ESDHC4_CMD				874
-MX53_PAD_PATA_DA_1__UART3_CTS				875
-MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3			876
-MX53_PAD_PATA_DA_2__PATA_DA_2				877
-MX53_PAD_PATA_DA_2__GPIO7_8				878
-MX53_PAD_PATA_DA_2__ESDHC4_CLK				879
-MX53_PAD_PATA_DA_2__UART3_RTS				880
-MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4			881
-MX53_PAD_PATA_CS_0__PATA_CS_0				882
-MX53_PAD_PATA_CS_0__GPIO7_9				883
-MX53_PAD_PATA_CS_0__UART3_TXD_MUX			884
-MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5			885
-MX53_PAD_PATA_CS_1__PATA_CS_1				886
-MX53_PAD_PATA_CS_1__GPIO7_10				887
-MX53_PAD_PATA_CS_1__UART3_RXD_MUX			888
-MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6			889
-MX53_PAD_PATA_DATA0__PATA_DATA_0			890
-MX53_PAD_PATA_DATA0__GPIO2_0				891
-MX53_PAD_PATA_DATA0__EMI_NANDF_D_0			892
-MX53_PAD_PATA_DATA0__ESDHC3_DAT4			893
-MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0		894
-MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0			895
-MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7			896
-MX53_PAD_PATA_DATA1__PATA_DATA_1			897
-MX53_PAD_PATA_DATA1__GPIO2_1				898
-MX53_PAD_PATA_DATA1__EMI_NANDF_D_1			899
-MX53_PAD_PATA_DATA1__ESDHC3_DAT5			900
-MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1		901
-MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1			902
-MX53_PAD_PATA_DATA2__PATA_DATA_2			903
-MX53_PAD_PATA_DATA2__GPIO2_2				904
-MX53_PAD_PATA_DATA2__EMI_NANDF_D_2			905
-MX53_PAD_PATA_DATA2__ESDHC3_DAT6			906
-MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2		907
-MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2			908
-MX53_PAD_PATA_DATA3__PATA_DATA_3			909
-MX53_PAD_PATA_DATA3__GPIO2_3				910
-MX53_PAD_PATA_DATA3__EMI_NANDF_D_3			911
-MX53_PAD_PATA_DATA3__ESDHC3_DAT7			912
-MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3		913
-MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3			914
-MX53_PAD_PATA_DATA4__PATA_DATA_4			915
-MX53_PAD_PATA_DATA4__GPIO2_4				916
-MX53_PAD_PATA_DATA4__EMI_NANDF_D_4			917
-MX53_PAD_PATA_DATA4__ESDHC4_DAT4			918
-MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4		919
-MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4			920
-MX53_PAD_PATA_DATA5__PATA_DATA_5			921
-MX53_PAD_PATA_DATA5__GPIO2_5				922
-MX53_PAD_PATA_DATA5__EMI_NANDF_D_5			923
-MX53_PAD_PATA_DATA5__ESDHC4_DAT5			924
-MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5		925
-MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5			926
-MX53_PAD_PATA_DATA6__PATA_DATA_6			927
-MX53_PAD_PATA_DATA6__GPIO2_6				928
-MX53_PAD_PATA_DATA6__EMI_NANDF_D_6			929
-MX53_PAD_PATA_DATA6__ESDHC4_DAT6			930
-MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6		931
-MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6			932
-MX53_PAD_PATA_DATA7__PATA_DATA_7			933
-MX53_PAD_PATA_DATA7__GPIO2_7				934
-MX53_PAD_PATA_DATA7__EMI_NANDF_D_7			935
-MX53_PAD_PATA_DATA7__ESDHC4_DAT7			936
-MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7		937
-MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7			938
-MX53_PAD_PATA_DATA8__PATA_DATA_8			939
-MX53_PAD_PATA_DATA8__GPIO2_8				940
-MX53_PAD_PATA_DATA8__ESDHC1_DAT4			941
-MX53_PAD_PATA_DATA8__EMI_NANDF_D_8			942
-MX53_PAD_PATA_DATA8__ESDHC3_DAT0			943
-MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8		944
-MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8			945
-MX53_PAD_PATA_DATA9__PATA_DATA_9			946
-MX53_PAD_PATA_DATA9__GPIO2_9				947
-MX53_PAD_PATA_DATA9__ESDHC1_DAT5			948
-MX53_PAD_PATA_DATA9__EMI_NANDF_D_9			949
-MX53_PAD_PATA_DATA9__ESDHC3_DAT1			950
-MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9		951
-MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9			952
-MX53_PAD_PATA_DATA10__PATA_DATA_10			953
-MX53_PAD_PATA_DATA10__GPIO2_10				954
-MX53_PAD_PATA_DATA10__ESDHC1_DAT6			955
-MX53_PAD_PATA_DATA10__EMI_NANDF_D_10			956
-MX53_PAD_PATA_DATA10__ESDHC3_DAT2			957
-MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10		958
-MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10			959
-MX53_PAD_PATA_DATA11__PATA_DATA_11			960
-MX53_PAD_PATA_DATA11__GPIO2_11				961
-MX53_PAD_PATA_DATA11__ESDHC1_DAT7			962
-MX53_PAD_PATA_DATA11__EMI_NANDF_D_11			963
-MX53_PAD_PATA_DATA11__ESDHC3_DAT3			964
-MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11		965
-MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11			966
-MX53_PAD_PATA_DATA12__PATA_DATA_12			967
-MX53_PAD_PATA_DATA12__GPIO2_12				968
-MX53_PAD_PATA_DATA12__ESDHC2_DAT4			969
-MX53_PAD_PATA_DATA12__EMI_NANDF_D_12			970
-MX53_PAD_PATA_DATA12__ESDHC4_DAT0			971
-MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12		972
-MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12			973
-MX53_PAD_PATA_DATA13__PATA_DATA_13			974
-MX53_PAD_PATA_DATA13__GPIO2_13				975
-MX53_PAD_PATA_DATA13__ESDHC2_DAT5			976
-MX53_PAD_PATA_DATA13__EMI_NANDF_D_13			977
-MX53_PAD_PATA_DATA13__ESDHC4_DAT1			978
-MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13		979
-MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13			980
-MX53_PAD_PATA_DATA14__PATA_DATA_14			981
-MX53_PAD_PATA_DATA14__GPIO2_14				982
-MX53_PAD_PATA_DATA14__ESDHC2_DAT6			983
-MX53_PAD_PATA_DATA14__EMI_NANDF_D_14			984
-MX53_PAD_PATA_DATA14__ESDHC4_DAT2			985
-MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14		986
-MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14			987
-MX53_PAD_PATA_DATA15__PATA_DATA_15			988
-MX53_PAD_PATA_DATA15__GPIO2_15				989
-MX53_PAD_PATA_DATA15__ESDHC2_DAT7			990
-MX53_PAD_PATA_DATA15__EMI_NANDF_D_15			991
-MX53_PAD_PATA_DATA15__ESDHC4_DAT3			992
-MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15		993
-MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15			994
-MX53_PAD_SD1_DATA0__ESDHC1_DAT0				995
-MX53_PAD_SD1_DATA0__GPIO1_16				996
-MX53_PAD_SD1_DATA0__GPT_CAPIN1				997
-MX53_PAD_SD1_DATA0__CSPI_MISO				998
-MX53_PAD_SD1_DATA0__CCM_PLL3_BYP			999
-MX53_PAD_SD1_DATA1__ESDHC1_DAT1				1000
-MX53_PAD_SD1_DATA1__GPIO1_17				1001
-MX53_PAD_SD1_DATA1__GPT_CAPIN2				1002
-MX53_PAD_SD1_DATA1__CSPI_SS0				1003
-MX53_PAD_SD1_DATA1__CCM_PLL4_BYP			1004
-MX53_PAD_SD1_CMD__ESDHC1_CMD				1005
-MX53_PAD_SD1_CMD__GPIO1_18				1006
-MX53_PAD_SD1_CMD__GPT_CMPOUT1				1007
-MX53_PAD_SD1_CMD__CSPI_MOSI				1008
-MX53_PAD_SD1_CMD__CCM_PLL1_BYP				1009
-MX53_PAD_SD1_DATA2__ESDHC1_DAT2				1010
-MX53_PAD_SD1_DATA2__GPIO1_19				1011
-MX53_PAD_SD1_DATA2__GPT_CMPOUT2				1012
-MX53_PAD_SD1_DATA2__PWM2_PWMO				1013
-MX53_PAD_SD1_DATA2__WDOG1_WDOG_B			1014
-MX53_PAD_SD1_DATA2__CSPI_SS1				1015
-MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB		1016
-MX53_PAD_SD1_DATA2__CCM_PLL2_BYP			1017
-MX53_PAD_SD1_CLK__ESDHC1_CLK				1018
-MX53_PAD_SD1_CLK__GPIO1_20				1019
-MX53_PAD_SD1_CLK__OSC32k_32K_OUT			1020
-MX53_PAD_SD1_CLK__GPT_CLKIN				1021
-MX53_PAD_SD1_CLK__CSPI_SCLK				1022
-MX53_PAD_SD1_CLK__SATA_PHY_DTB_0			1023
-MX53_PAD_SD1_DATA3__ESDHC1_DAT3				1024
-MX53_PAD_SD1_DATA3__GPIO1_21				1025
-MX53_PAD_SD1_DATA3__GPT_CMPOUT3				1026
-MX53_PAD_SD1_DATA3__PWM1_PWMO				1027
-MX53_PAD_SD1_DATA3__WDOG2_WDOG_B			1028
-MX53_PAD_SD1_DATA3__CSPI_SS2				1029
-MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB		1030
-MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1			1031
-MX53_PAD_SD2_CLK__ESDHC2_CLK				1032
-MX53_PAD_SD2_CLK__GPIO1_10				1033
-MX53_PAD_SD2_CLK__KPP_COL_5				1034
-MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS			1035
-MX53_PAD_SD2_CLK__CSPI_SCLK				1036
-MX53_PAD_SD2_CLK__SCC_RANDOM_V				1037
-MX53_PAD_SD2_CMD__ESDHC2_CMD				1038
-MX53_PAD_SD2_CMD__GPIO1_11				1039
-MX53_PAD_SD2_CMD__KPP_ROW_5				1040
-MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC			1041
-MX53_PAD_SD2_CMD__CSPI_MOSI				1042
-MX53_PAD_SD2_CMD__SCC_RANDOM				1043
-MX53_PAD_SD2_DATA3__ESDHC2_DAT3				1044
-MX53_PAD_SD2_DATA3__GPIO1_12				1045
-MX53_PAD_SD2_DATA3__KPP_COL_6				1046
-MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC			1047
-MX53_PAD_SD2_DATA3__CSPI_SS2				1048
-MX53_PAD_SD2_DATA3__SJC_DONE				1049
-MX53_PAD_SD2_DATA2__ESDHC2_DAT2				1050
-MX53_PAD_SD2_DATA2__GPIO1_13				1051
-MX53_PAD_SD2_DATA2__KPP_ROW_6				1052
-MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD			1053
-MX53_PAD_SD2_DATA2__CSPI_SS1				1054
-MX53_PAD_SD2_DATA2__SJC_FAIL				1055
-MX53_PAD_SD2_DATA1__ESDHC2_DAT1				1056
-MX53_PAD_SD2_DATA1__GPIO1_14				1057
-MX53_PAD_SD2_DATA1__KPP_COL_7				1058
-MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS			1059
-MX53_PAD_SD2_DATA1__CSPI_SS0				1060
-MX53_PAD_SD2_DATA1__RTIC_SEC_VIO			1061
-MX53_PAD_SD2_DATA0__ESDHC2_DAT0				1062
-MX53_PAD_SD2_DATA0__GPIO1_15				1063
-MX53_PAD_SD2_DATA0__KPP_ROW_7				1064
-MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD			1065
-MX53_PAD_SD2_DATA0__CSPI_MISO				1066
-MX53_PAD_SD2_DATA0__RTIC_DONE_INT			1067
-MX53_PAD_GPIO_0__CCM_CLKO				1068
-MX53_PAD_GPIO_0__GPIO1_0				1069
-MX53_PAD_GPIO_0__KPP_COL_5				1070
-MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK			1071
-MX53_PAD_GPIO_0__EPIT1_EPITO				1072
-MX53_PAD_GPIO_0__SRTC_ALARM_DEB				1073
-MX53_PAD_GPIO_0__USBOH3_USBH1_PWR			1074
-MX53_PAD_GPIO_0__CSU_TD					1075
-MX53_PAD_GPIO_1__ESAI1_SCKR				1076
-MX53_PAD_GPIO_1__GPIO1_1				1077
-MX53_PAD_GPIO_1__KPP_ROW_5				1078
-MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK			1079
-MX53_PAD_GPIO_1__PWM2_PWMO				1080
-MX53_PAD_GPIO_1__WDOG2_WDOG_B				1081
-MX53_PAD_GPIO_1__ESDHC1_CD				1082
-MX53_PAD_GPIO_1__SRC_TESTER_ACK				1083
-MX53_PAD_GPIO_9__ESAI1_FSR				1084
-MX53_PAD_GPIO_9__GPIO1_9				1085
-MX53_PAD_GPIO_9__KPP_COL_6				1086
-MX53_PAD_GPIO_9__CCM_REF_EN_B				1087
-MX53_PAD_GPIO_9__PWM1_PWMO				1088
-MX53_PAD_GPIO_9__WDOG1_WDOG_B				1089
-MX53_PAD_GPIO_9__ESDHC1_WP				1090
-MX53_PAD_GPIO_9__SCC_FAIL_STATE				1091
-MX53_PAD_GPIO_3__ESAI1_HCKR				1092
-MX53_PAD_GPIO_3__GPIO1_3				1093
-MX53_PAD_GPIO_3__I2C3_SCL				1094
-MX53_PAD_GPIO_3__DPLLIP1_TOG_EN				1095
-MX53_PAD_GPIO_3__CCM_CLKO2				1096
-MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0		1097
-MX53_PAD_GPIO_3__USBOH3_USBH1_OC			1098
-MX53_PAD_GPIO_3__MLB_MLBCLK				1099
-MX53_PAD_GPIO_6__ESAI1_SCKT				1100
-MX53_PAD_GPIO_6__GPIO1_6				1101
-MX53_PAD_GPIO_6__I2C3_SDA				1102
-MX53_PAD_GPIO_6__CCM_CCM_OUT_0				1103
-MX53_PAD_GPIO_6__CSU_CSU_INT_DEB			1104
-MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1		1105
-MX53_PAD_GPIO_6__ESDHC2_LCTL				1106
-MX53_PAD_GPIO_6__MLB_MLBSIG				1107
-MX53_PAD_GPIO_2__ESAI1_FST				1108
-MX53_PAD_GPIO_2__GPIO1_2				1109
-MX53_PAD_GPIO_2__KPP_ROW_6				1110
-MX53_PAD_GPIO_2__CCM_CCM_OUT_1				1111
-MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0			1112
-MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2		1113
-MX53_PAD_GPIO_2__ESDHC2_WP				1114
-MX53_PAD_GPIO_2__MLB_MLBDAT				1115
-MX53_PAD_GPIO_4__ESAI1_HCKT				1116
-MX53_PAD_GPIO_4__GPIO1_4				1117
-MX53_PAD_GPIO_4__KPP_COL_7				1118
-MX53_PAD_GPIO_4__CCM_CCM_OUT_2				1119
-MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1			1120
-MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3		1121
-MX53_PAD_GPIO_4__ESDHC2_CD				1122
-MX53_PAD_GPIO_4__SCC_SEC_STATE				1123
-MX53_PAD_GPIO_5__ESAI1_TX2_RX3				1124
-MX53_PAD_GPIO_5__GPIO1_5				1125
-MX53_PAD_GPIO_5__KPP_ROW_7				1126
-MX53_PAD_GPIO_5__CCM_CLKO				1127
-MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2			1128
-MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4		1129
-MX53_PAD_GPIO_5__I2C3_SCL				1130
-MX53_PAD_GPIO_5__CCM_PLL1_BYP				1131
-MX53_PAD_GPIO_7__ESAI1_TX4_RX1				1132
-MX53_PAD_GPIO_7__GPIO1_7				1133
-MX53_PAD_GPIO_7__EPIT1_EPITO				1134
-MX53_PAD_GPIO_7__CAN1_TXCAN				1135
-MX53_PAD_GPIO_7__UART2_TXD_MUX				1136
-MX53_PAD_GPIO_7__FIRI_RXD				1137
-MX53_PAD_GPIO_7__SPDIF_PLOCK				1138
-MX53_PAD_GPIO_7__CCM_PLL2_BYP				1139
-MX53_PAD_GPIO_8__ESAI1_TX5_RX0				1140
-MX53_PAD_GPIO_8__GPIO1_8				1141
-MX53_PAD_GPIO_8__EPIT2_EPITO				1142
-MX53_PAD_GPIO_8__CAN1_RXCAN				1143
-MX53_PAD_GPIO_8__UART2_RXD_MUX				1144
-MX53_PAD_GPIO_8__FIRI_TXD				1145
-MX53_PAD_GPIO_8__SPDIF_SRCLK				1146
-MX53_PAD_GPIO_8__CCM_PLL3_BYP				1147
-MX53_PAD_GPIO_16__ESAI1_TX3_RX2				1148
-MX53_PAD_GPIO_16__GPIO7_11				1149
-MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT			1150
-MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1			1151
-MX53_PAD_GPIO_16__SPDIF_IN1				1152
-MX53_PAD_GPIO_16__I2C3_SDA				1153
-MX53_PAD_GPIO_16__SJC_DE_B				1154
-MX53_PAD_GPIO_17__ESAI1_TX0				1155
-MX53_PAD_GPIO_17__GPIO7_12				1156
-MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0			1157
-MX53_PAD_GPIO_17__GPC_PMIC_RDY				1158
-MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG			1159
-MX53_PAD_GPIO_17__SPDIF_OUT1				1160
-MX53_PAD_GPIO_17__IPU_SNOOP2				1161
-MX53_PAD_GPIO_17__SJC_JTAG_ACT				1162
-MX53_PAD_GPIO_18__ESAI1_TX1				1163
-MX53_PAD_GPIO_18__GPIO7_13				1164
-MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1			1165
-MX53_PAD_GPIO_18__OWIRE_LINE				1166
-MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG		1167
-MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK			1168
-MX53_PAD_GPIO_18__ESDHC1_LCTL				1169
-MX53_PAD_GPIO_18__SRC_SYSTEM_RST			1170
+Refer to imx53-pinfunc.h in device tree source folder for all available
+imx53 PIN_FUNC_ID.

Documentation/devicetree/bindings/pinctrl/fsl,imx6dl-pinctrl.txt

@@ -0,0 +1,38 @@
+* Freescale IMX6 DualLite/Solo IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx6dl-iomuxc"
+- fsl,pins: two integers array, represents a group of pins mux and config
+  setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
+  pin working on a specific function, CONFIG is the pad setting value like
+  pull-up for this pin. Please refer to imx6dl datasheet for the valid pad
+  config settings.
+
+CONFIG bits definition:
+PAD_CTL_HYS                     (1 << 16)
+PAD_CTL_PUS_100K_DOWN           (0 << 14)
+PAD_CTL_PUS_47K_UP              (1 << 14)
+PAD_CTL_PUS_100K_UP             (2 << 14)
+PAD_CTL_PUS_22K_UP              (3 << 14)
+PAD_CTL_PUE                     (1 << 13)
+PAD_CTL_PKE                     (1 << 12)
+PAD_CTL_ODE                     (1 << 11)
+PAD_CTL_SPEED_LOW               (1 << 6)
+PAD_CTL_SPEED_MED               (2 << 6)
+PAD_CTL_SPEED_HIGH              (3 << 6)
+PAD_CTL_DSE_DISABLE             (0 << 3)
+PAD_CTL_DSE_240ohm              (1 << 3)
+PAD_CTL_DSE_120ohm              (2 << 3)
+PAD_CTL_DSE_80ohm               (3 << 3)
+PAD_CTL_DSE_60ohm               (4 << 3)
+PAD_CTL_DSE_48ohm               (5 << 3)
+PAD_CTL_DSE_40ohm               (6 << 3)
+PAD_CTL_DSE_34ohm               (7 << 3)
+PAD_CTL_SRE_FAST                (1 << 0)
+PAD_CTL_SRE_SLOW                (0 << 0)
+
+Refer to imx6dl-pinfunc.h in device tree source folder for all available
+imx6dl PIN_FUNC_ID.

Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt

@@ -34,1597 +34,5 @@ PAD_CTL_DSE_34ohm               (7 << 3)
 PAD_CTL_SRE_FAST                (1 << 0)
 PAD_CTL_SRE_SLOW                (0 << 0)
 
-See below for available PIN_FUNC_ID for imx6q:
-MX6Q_PAD_SD2_DAT1__USDHC2_DAT1			0
-MX6Q_PAD_SD2_DAT1__ECSPI5_SS0			1
-MX6Q_PAD_SD2_DAT1__WEIM_WEIM_CS_2		2
-MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS		3
-MX6Q_PAD_SD2_DAT1__KPP_COL_7			4
-MX6Q_PAD_SD2_DAT1__GPIO_1_14			5
-MX6Q_PAD_SD2_DAT1__CCM_WAIT			6
-MX6Q_PAD_SD2_DAT1__ANATOP_TESTO_0		7
-MX6Q_PAD_SD2_DAT2__USDHC2_DAT2			8
-MX6Q_PAD_SD2_DAT2__ECSPI5_SS1			9
-MX6Q_PAD_SD2_DAT2__WEIM_WEIM_CS_3		10
-MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD		11
-MX6Q_PAD_SD2_DAT2__KPP_ROW_6			12
-MX6Q_PAD_SD2_DAT2__GPIO_1_13			13
-MX6Q_PAD_SD2_DAT2__CCM_STOP			14
-MX6Q_PAD_SD2_DAT2__ANATOP_TESTO_1		15
-MX6Q_PAD_SD2_DAT0__USDHC2_DAT0			16
-MX6Q_PAD_SD2_DAT0__ECSPI5_MISO			17
-MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD		18
-MX6Q_PAD_SD2_DAT0__KPP_ROW_7			19
-MX6Q_PAD_SD2_DAT0__GPIO_1_15			20
-MX6Q_PAD_SD2_DAT0__DCIC2_DCIC_OUT		21
-MX6Q_PAD_SD2_DAT0__TESTO_2			22
-MX6Q_PAD_RGMII_TXC__USBOH3_H2_DATA		23
-MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC		24
-MX6Q_PAD_RGMII_TXC__SPDIF_SPDIF_EXTCLK		25
-MX6Q_PAD_RGMII_TXC__GPIO_6_19			26
-MX6Q_PAD_RGMII_TXC__MIPI_CORE_DPHY_IN_0		27
-MX6Q_PAD_RGMII_TXC__ANATOP_24M_OUT		28
-MX6Q_PAD_RGMII_TD0__MIPI_HSI_CRL_TX_RDY		29
-MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0		30
-MX6Q_PAD_RGMII_TD0__GPIO_6_20			31
-MX6Q_PAD_RGMII_TD0__MIPI_CORE_DPHY_IN_1		32
-MX6Q_PAD_RGMII_TD1__MIPI_HSI_CRL_RX_FLG		33
-MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1		34
-MX6Q_PAD_RGMII_TD1__GPIO_6_21			35
-MX6Q_PAD_RGMII_TD1__MIPI_CORE_DPHY_IN_2		36
-MX6Q_PAD_RGMII_TD1__CCM_PLL3_BYP		37
-MX6Q_PAD_RGMII_TD2__MIPI_HSI_CRL_RX_DTA		38
-MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2		39
-MX6Q_PAD_RGMII_TD2__GPIO_6_22			40
-MX6Q_PAD_RGMII_TD2__MIPI_CORE_DPHY_IN_3		41
-MX6Q_PAD_RGMII_TD2__CCM_PLL2_BYP		42
-MX6Q_PAD_RGMII_TD3__MIPI_HSI_CRL_RX_WAK		43
-MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3		44
-MX6Q_PAD_RGMII_TD3__GPIO_6_23			45
-MX6Q_PAD_RGMII_TD3__MIPI_CORE_DPHY_IN_4		46
-MX6Q_PAD_RGMII_RX_CTL__USBOH3_H3_DATA		47
-MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL		48
-MX6Q_PAD_RGMII_RX_CTL__GPIO_6_24		49
-MX6Q_PAD_RGMII_RX_CTL__MIPI_DPHY_IN_5		50
-MX6Q_PAD_RGMII_RD0__MIPI_HSI_CRL_RX_RDY		51
-MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0		52
-MX6Q_PAD_RGMII_RD0__GPIO_6_25			53
-MX6Q_PAD_RGMII_RD0__MIPI_CORE_DPHY_IN_6		54
-MX6Q_PAD_RGMII_TX_CTL__USBOH3_H2_STROBE		55
-MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL		56
-MX6Q_PAD_RGMII_TX_CTL__GPIO_6_26		57
-MX6Q_PAD_RGMII_TX_CTL__CORE_DPHY_IN_7		58
-MX6Q_PAD_RGMII_TX_CTL__ANATOP_REF_OUT		59
-MX6Q_PAD_RGMII_RD1__MIPI_HSI_CTRL_TX_FL		60
-MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1		61
-MX6Q_PAD_RGMII_RD1__GPIO_6_27			62
-MX6Q_PAD_RGMII_RD1__CORE_DPHY_TEST_IN_8		63
-MX6Q_PAD_RGMII_RD1__SJC_FAIL			64
-MX6Q_PAD_RGMII_RD2__MIPI_HSI_CRL_TX_DTA		65
-MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2		66
-MX6Q_PAD_RGMII_RD2__GPIO_6_28			67
-MX6Q_PAD_RGMII_RD2__MIPI_CORE_DPHY_IN_9		68
-MX6Q_PAD_RGMII_RD3__MIPI_HSI_CRL_TX_WAK		69
-MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3		70
-MX6Q_PAD_RGMII_RD3__GPIO_6_29			71
-MX6Q_PAD_RGMII_RD3__MIPI_CORE_DPHY_IN10		72
-MX6Q_PAD_RGMII_RXC__USBOH3_H3_STROBE		73
-MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC		74
-MX6Q_PAD_RGMII_RXC__GPIO_6_30			75
-MX6Q_PAD_RGMII_RXC__MIPI_CORE_DPHY_IN11		76
-MX6Q_PAD_EIM_A25__WEIM_WEIM_A_25		77
-MX6Q_PAD_EIM_A25__ECSPI4_SS1			78
-MX6Q_PAD_EIM_A25__ECSPI2_RDY			79
-MX6Q_PAD_EIM_A25__IPU1_DI1_PIN12		80
-MX6Q_PAD_EIM_A25__IPU1_DI0_D1_CS		81
-MX6Q_PAD_EIM_A25__GPIO_5_2			82
-MX6Q_PAD_EIM_A25__HDMI_TX_CEC_LINE		83
-MX6Q_PAD_EIM_A25__PL301_PER1_HBURST_0		84
-MX6Q_PAD_EIM_EB2__WEIM_WEIM_EB_2		85
-MX6Q_PAD_EIM_EB2__ECSPI1_SS0			86
-MX6Q_PAD_EIM_EB2__CCM_DI1_EXT_CLK		87
-MX6Q_PAD_EIM_EB2__IPU2_CSI1_D_19		88
-MX6Q_PAD_EIM_EB2__HDMI_TX_DDC_SCL		89
-MX6Q_PAD_EIM_EB2__GPIO_2_30			90
-MX6Q_PAD_EIM_EB2__I2C2_SCL			91
-MX6Q_PAD_EIM_EB2__SRC_BT_CFG_30			92
-MX6Q_PAD_EIM_D16__WEIM_WEIM_D_16		93
-MX6Q_PAD_EIM_D16__ECSPI1_SCLK			94
-MX6Q_PAD_EIM_D16__IPU1_DI0_PIN5			95
-MX6Q_PAD_EIM_D16__IPU2_CSI1_D_18		96
-MX6Q_PAD_EIM_D16__HDMI_TX_DDC_SDA		97
-MX6Q_PAD_EIM_D16__GPIO_3_16			98
-MX6Q_PAD_EIM_D16__I2C2_SDA			99
-MX6Q_PAD_EIM_D17__WEIM_WEIM_D_17		100
-MX6Q_PAD_EIM_D17__ECSPI1_MISO			101
-MX6Q_PAD_EIM_D17__IPU1_DI0_PIN6			102
-MX6Q_PAD_EIM_D17__IPU2_CSI1_PIXCLK		103
-MX6Q_PAD_EIM_D17__DCIC1_DCIC_OUT		104
-MX6Q_PAD_EIM_D17__GPIO_3_17			105
-MX6Q_PAD_EIM_D17__I2C3_SCL			106
-MX6Q_PAD_EIM_D17__PL301_PER1_HBURST_1		107
-MX6Q_PAD_EIM_D18__WEIM_WEIM_D_18		108
-MX6Q_PAD_EIM_D18__ECSPI1_MOSI			109
-MX6Q_PAD_EIM_D18__IPU1_DI0_PIN7			110
-MX6Q_PAD_EIM_D18__IPU2_CSI1_D_17		111
-MX6Q_PAD_EIM_D18__IPU1_DI1_D0_CS		112
-MX6Q_PAD_EIM_D18__GPIO_3_18			113
-MX6Q_PAD_EIM_D18__I2C3_SDA			114
-MX6Q_PAD_EIM_D18__PL301_PER1_HBURST_2		115
-MX6Q_PAD_EIM_D19__WEIM_WEIM_D_19		116
-MX6Q_PAD_EIM_D19__ECSPI1_SS1			117
-MX6Q_PAD_EIM_D19__IPU1_DI0_PIN8			118
-MX6Q_PAD_EIM_D19__IPU2_CSI1_D_16		119
-MX6Q_PAD_EIM_D19__UART1_CTS			120
-MX6Q_PAD_EIM_D19__GPIO_3_19			121
-MX6Q_PAD_EIM_D19__EPIT1_EPITO			122
-MX6Q_PAD_EIM_D19__PL301_PER1_HRESP		123
-MX6Q_PAD_EIM_D20__WEIM_WEIM_D_20		124
-MX6Q_PAD_EIM_D20__ECSPI4_SS0			125
-MX6Q_PAD_EIM_D20__IPU1_DI0_PIN16		126
-MX6Q_PAD_EIM_D20__IPU2_CSI1_D_15		127
-MX6Q_PAD_EIM_D20__UART1_RTS			128
-MX6Q_PAD_EIM_D20__GPIO_3_20			129
-MX6Q_PAD_EIM_D20__EPIT2_EPITO			130
-MX6Q_PAD_EIM_D21__WEIM_WEIM_D_21		131
-MX6Q_PAD_EIM_D21__ECSPI4_SCLK			132
-MX6Q_PAD_EIM_D21__IPU1_DI0_PIN17		133
-MX6Q_PAD_EIM_D21__IPU2_CSI1_D_11		134
-MX6Q_PAD_EIM_D21__USBOH3_USBOTG_OC		135
-MX6Q_PAD_EIM_D21__GPIO_3_21			136
-MX6Q_PAD_EIM_D21__I2C1_SCL			137
-MX6Q_PAD_EIM_D21__SPDIF_IN1			138
-MX6Q_PAD_EIM_D22__WEIM_WEIM_D_22		139
-MX6Q_PAD_EIM_D22__ECSPI4_MISO			140
-MX6Q_PAD_EIM_D22__IPU1_DI0_PIN1			141
-MX6Q_PAD_EIM_D22__IPU2_CSI1_D_10		142
-MX6Q_PAD_EIM_D22__USBOH3_USBOTG_PWR		143
-MX6Q_PAD_EIM_D22__GPIO_3_22			144
-MX6Q_PAD_EIM_D22__SPDIF_OUT1			145
-MX6Q_PAD_EIM_D22__PL301_PER1_HWRITE		146
-MX6Q_PAD_EIM_D23__WEIM_WEIM_D_23		147
-MX6Q_PAD_EIM_D23__IPU1_DI0_D0_CS		148
-MX6Q_PAD_EIM_D23__UART3_CTS			149
-MX6Q_PAD_EIM_D23__UART1_DCD			150
-MX6Q_PAD_EIM_D23__IPU2_CSI1_DATA_EN		151
-MX6Q_PAD_EIM_D23__GPIO_3_23			152
-MX6Q_PAD_EIM_D23__IPU1_DI1_PIN2			153
-MX6Q_PAD_EIM_D23__IPU1_DI1_PIN14		154
-MX6Q_PAD_EIM_EB3__WEIM_WEIM_EB_3		155
-MX6Q_PAD_EIM_EB3__ECSPI4_RDY			156
-MX6Q_PAD_EIM_EB3__UART3_RTS			157
-MX6Q_PAD_EIM_EB3__UART1_RI			158
-MX6Q_PAD_EIM_EB3__IPU2_CSI1_HSYNC		159
-MX6Q_PAD_EIM_EB3__GPIO_2_31			160
-MX6Q_PAD_EIM_EB3__IPU1_DI1_PIN3			161
-MX6Q_PAD_EIM_EB3__SRC_BT_CFG_31			162
-MX6Q_PAD_EIM_D24__WEIM_WEIM_D_24		163
-MX6Q_PAD_EIM_D24__ECSPI4_SS2			164
-MX6Q_PAD_EIM_D24__UART3_TXD			165
-MX6Q_PAD_EIM_D24__ECSPI1_SS2			166
-MX6Q_PAD_EIM_D24__ECSPI2_SS2			167
-MX6Q_PAD_EIM_D24__GPIO_3_24			168
-MX6Q_PAD_EIM_D24__AUDMUX_AUD5_RXFS		169
-MX6Q_PAD_EIM_D24__UART1_DTR			170
-MX6Q_PAD_EIM_D25__WEIM_WEIM_D_25		171
-MX6Q_PAD_EIM_D25__ECSPI4_SS3			172
-MX6Q_PAD_EIM_D25__UART3_RXD			173
-MX6Q_PAD_EIM_D25__ECSPI1_SS3			174
-MX6Q_PAD_EIM_D25__ECSPI2_SS3			175
-MX6Q_PAD_EIM_D25__GPIO_3_25			176
-MX6Q_PAD_EIM_D25__AUDMUX_AUD5_RXC		177
-MX6Q_PAD_EIM_D25__UART1_DSR			178
-MX6Q_PAD_EIM_D26__WEIM_WEIM_D_26		179
-MX6Q_PAD_EIM_D26__IPU1_DI1_PIN11		180
-MX6Q_PAD_EIM_D26__IPU1_CSI0_D_1			181
-MX6Q_PAD_EIM_D26__IPU2_CSI1_D_14		182
-MX6Q_PAD_EIM_D26__UART2_TXD			183
-MX6Q_PAD_EIM_D26__GPIO_3_26			184
-MX6Q_PAD_EIM_D26__IPU1_SISG_2			185
-MX6Q_PAD_EIM_D26__IPU1_DISP1_DAT_22		186
-MX6Q_PAD_EIM_D27__WEIM_WEIM_D_27		187
-MX6Q_PAD_EIM_D27__IPU1_DI1_PIN13		188
-MX6Q_PAD_EIM_D27__IPU1_CSI0_D_0			189
-MX6Q_PAD_EIM_D27__IPU2_CSI1_D_13		190
-MX6Q_PAD_EIM_D27__UART2_RXD			191
-MX6Q_PAD_EIM_D27__GPIO_3_27			192
-MX6Q_PAD_EIM_D27__IPU1_SISG_3			193
-MX6Q_PAD_EIM_D27__IPU1_DISP1_DAT_23		194
-MX6Q_PAD_EIM_D28__WEIM_WEIM_D_28		195
-MX6Q_PAD_EIM_D28__I2C1_SDA			196
-MX6Q_PAD_EIM_D28__ECSPI4_MOSI			197
-MX6Q_PAD_EIM_D28__IPU2_CSI1_D_12		198
-MX6Q_PAD_EIM_D28__UART2_CTS			199
-MX6Q_PAD_EIM_D28__GPIO_3_28			200
-MX6Q_PAD_EIM_D28__IPU1_EXT_TRIG			201
-MX6Q_PAD_EIM_D28__IPU1_DI0_PIN13		202
-MX6Q_PAD_EIM_D29__WEIM_WEIM_D_29		203
-MX6Q_PAD_EIM_D29__IPU1_DI1_PIN15		204
-MX6Q_PAD_EIM_D29__ECSPI4_SS0			205
-MX6Q_PAD_EIM_D29__UART2_RTS			206
-MX6Q_PAD_EIM_D29__GPIO_3_29			207
-MX6Q_PAD_EIM_D29__IPU2_CSI1_VSYNC		208
-MX6Q_PAD_EIM_D29__IPU1_DI0_PIN14		209
-MX6Q_PAD_EIM_D30__WEIM_WEIM_D_30		210
-MX6Q_PAD_EIM_D30__IPU1_DISP1_DAT_21		211
-MX6Q_PAD_EIM_D30__IPU1_DI0_PIN11		212
-MX6Q_PAD_EIM_D30__IPU1_CSI0_D_3			213
-MX6Q_PAD_EIM_D30__UART3_CTS			214
-MX6Q_PAD_EIM_D30__GPIO_3_30			215
-MX6Q_PAD_EIM_D30__USBOH3_USBH1_OC		216
-MX6Q_PAD_EIM_D30__PL301_PER1_HPROT_0		217
-MX6Q_PAD_EIM_D31__WEIM_WEIM_D_31		218
-MX6Q_PAD_EIM_D31__IPU1_DISP1_DAT_20		219
-MX6Q_PAD_EIM_D31__IPU1_DI0_PIN12		220
-MX6Q_PAD_EIM_D31__IPU1_CSI0_D_2			221
-MX6Q_PAD_EIM_D31__UART3_RTS			222
-MX6Q_PAD_EIM_D31__GPIO_3_31			223
-MX6Q_PAD_EIM_D31__USBOH3_USBH1_PWR		224
-MX6Q_PAD_EIM_D31__PL301_PER1_HPROT_1		225
-MX6Q_PAD_EIM_A24__WEIM_WEIM_A_24		226
-MX6Q_PAD_EIM_A24__IPU1_DISP1_DAT_19		227
-MX6Q_PAD_EIM_A24__IPU2_CSI1_D_19		228
-MX6Q_PAD_EIM_A24__IPU2_SISG_2			229
-MX6Q_PAD_EIM_A24__IPU1_SISG_2			230
-MX6Q_PAD_EIM_A24__GPIO_5_4			231
-MX6Q_PAD_EIM_A24__PL301_PER1_HPROT_2		232
-MX6Q_PAD_EIM_A24__SRC_BT_CFG_24			233
-MX6Q_PAD_EIM_A23__WEIM_WEIM_A_23		234
-MX6Q_PAD_EIM_A23__IPU1_DISP1_DAT_18		235
-MX6Q_PAD_EIM_A23__IPU2_CSI1_D_18		236
-MX6Q_PAD_EIM_A23__IPU2_SISG_3			237
-MX6Q_PAD_EIM_A23__IPU1_SISG_3			238
-MX6Q_PAD_EIM_A23__GPIO_6_6			239
-MX6Q_PAD_EIM_A23__PL301_PER1_HPROT_3		240
-MX6Q_PAD_EIM_A23__SRC_BT_CFG_23			241
-MX6Q_PAD_EIM_A22__WEIM_WEIM_A_22		242
-MX6Q_PAD_EIM_A22__IPU1_DISP1_DAT_17		243
-MX6Q_PAD_EIM_A22__IPU2_CSI1_D_17		244
-MX6Q_PAD_EIM_A22__GPIO_2_16			245
-MX6Q_PAD_EIM_A22__TPSMP_HDATA_0			246
-MX6Q_PAD_EIM_A22__SRC_BT_CFG_22			247
-MX6Q_PAD_EIM_A21__WEIM_WEIM_A_21		248
-MX6Q_PAD_EIM_A21__IPU1_DISP1_DAT_16		249
-MX6Q_PAD_EIM_A21__IPU2_CSI1_D_16		250
-MX6Q_PAD_EIM_A21__RESERVED_RESERVED		251
-MX6Q_PAD_EIM_A21__MIPI_CORE_DPHY_OUT_18		252
-MX6Q_PAD_EIM_A21__GPIO_2_17			253
-MX6Q_PAD_EIM_A21__TPSMP_HDATA_1			254
-MX6Q_PAD_EIM_A21__SRC_BT_CFG_21			255
-MX6Q_PAD_EIM_A20__WEIM_WEIM_A_20		256
-MX6Q_PAD_EIM_A20__IPU1_DISP1_DAT_15		257
-MX6Q_PAD_EIM_A20__IPU2_CSI1_D_15		258
-MX6Q_PAD_EIM_A20__RESERVED_RESERVED		259
-MX6Q_PAD_EIM_A20__MIPI_CORE_DPHY_OUT_19		260
-MX6Q_PAD_EIM_A20__GPIO_2_18			261
-MX6Q_PAD_EIM_A20__TPSMP_HDATA_2			262
-MX6Q_PAD_EIM_A20__SRC_BT_CFG_20			263
-MX6Q_PAD_EIM_A19__WEIM_WEIM_A_19		264
-MX6Q_PAD_EIM_A19__IPU1_DISP1_DAT_14		265
-MX6Q_PAD_EIM_A19__IPU2_CSI1_D_14		266
-MX6Q_PAD_EIM_A19__RESERVED_RESERVED		267
-MX6Q_PAD_EIM_A19__MIPI_CORE_DPHY_OUT_20		268
-MX6Q_PAD_EIM_A19__GPIO_2_19			269
-MX6Q_PAD_EIM_A19__TPSMP_HDATA_3			270
-MX6Q_PAD_EIM_A19__SRC_BT_CFG_19			271
-MX6Q_PAD_EIM_A18__WEIM_WEIM_A_18		272
-MX6Q_PAD_EIM_A18__IPU1_DISP1_DAT_13		273
-MX6Q_PAD_EIM_A18__IPU2_CSI1_D_13		274
-MX6Q_PAD_EIM_A18__RESERVED_RESERVED		275
-MX6Q_PAD_EIM_A18__MIPI_CORE_DPHY_OUT_21		276
-MX6Q_PAD_EIM_A18__GPIO_2_20			277
-MX6Q_PAD_EIM_A18__TPSMP_HDATA_4			278
-MX6Q_PAD_EIM_A18__SRC_BT_CFG_18			279
-MX6Q_PAD_EIM_A17__WEIM_WEIM_A_17		280
-MX6Q_PAD_EIM_A17__IPU1_DISP1_DAT_12		281
-MX6Q_PAD_EIM_A17__IPU2_CSI1_D_12		282
-MX6Q_PAD_EIM_A17__RESERVED_RESERVED		283
-MX6Q_PAD_EIM_A17__MIPI_CORE_DPHY_OUT_22		284
-MX6Q_PAD_EIM_A17__GPIO_2_21			285
-MX6Q_PAD_EIM_A17__TPSMP_HDATA_5			286
-MX6Q_PAD_EIM_A17__SRC_BT_CFG_17			287
-MX6Q_PAD_EIM_A16__WEIM_WEIM_A_16		288
-MX6Q_PAD_EIM_A16__IPU1_DI1_DISP_CLK		289
-MX6Q_PAD_EIM_A16__IPU2_CSI1_PIXCLK		290
-MX6Q_PAD_EIM_A16__MIPI_CORE_DPHY_OUT_23		291
-MX6Q_PAD_EIM_A16__GPIO_2_22			292
-MX6Q_PAD_EIM_A16__TPSMP_HDATA_6			293
-MX6Q_PAD_EIM_A16__SRC_BT_CFG_16			294
-MX6Q_PAD_EIM_CS0__WEIM_WEIM_CS_0		295
-MX6Q_PAD_EIM_CS0__IPU1_DI1_PIN5			296
-MX6Q_PAD_EIM_CS0__ECSPI2_SCLK			297
-MX6Q_PAD_EIM_CS0__MIPI_CORE_DPHY_OUT_24		298
-MX6Q_PAD_EIM_CS0__GPIO_2_23			299
-MX6Q_PAD_EIM_CS0__TPSMP_HDATA_7			300
-MX6Q_PAD_EIM_CS1__WEIM_WEIM_CS_1		301
-MX6Q_PAD_EIM_CS1__IPU1_DI1_PIN6			302
-MX6Q_PAD_EIM_CS1__ECSPI2_MOSI			303
-MX6Q_PAD_EIM_CS1__MIPI_CORE_DPHY_OUT_25		304
-MX6Q_PAD_EIM_CS1__GPIO_2_24			305
-MX6Q_PAD_EIM_CS1__TPSMP_HDATA_8			306
-MX6Q_PAD_EIM_OE__WEIM_WEIM_OE			307
-MX6Q_PAD_EIM_OE__IPU1_DI1_PIN7			308
-MX6Q_PAD_EIM_OE__ECSPI2_MISO			309
-MX6Q_PAD_EIM_OE__MIPI_CORE_DPHY_OUT_26		310
-MX6Q_PAD_EIM_OE__GPIO_2_25			311
-MX6Q_PAD_EIM_OE__TPSMP_HDATA_9			312
-MX6Q_PAD_EIM_RW__WEIM_WEIM_RW			313
-MX6Q_PAD_EIM_RW__IPU1_DI1_PIN8			314
-MX6Q_PAD_EIM_RW__ECSPI2_SS0			315
-MX6Q_PAD_EIM_RW__MIPI_CORE_DPHY_OUT_27		316
-MX6Q_PAD_EIM_RW__GPIO_2_26			317
-MX6Q_PAD_EIM_RW__TPSMP_HDATA_10			318
-MX6Q_PAD_EIM_RW__SRC_BT_CFG_29			319
-MX6Q_PAD_EIM_LBA__WEIM_WEIM_LBA			320
-MX6Q_PAD_EIM_LBA__IPU1_DI1_PIN17		321
-MX6Q_PAD_EIM_LBA__ECSPI2_SS1			322
-MX6Q_PAD_EIM_LBA__GPIO_2_27			323
-MX6Q_PAD_EIM_LBA__TPSMP_HDATA_11		324
-MX6Q_PAD_EIM_LBA__SRC_BT_CFG_26			325
-MX6Q_PAD_EIM_EB0__WEIM_WEIM_EB_0		326
-MX6Q_PAD_EIM_EB0__IPU1_DISP1_DAT_11		327
-MX6Q_PAD_EIM_EB0__IPU2_CSI1_D_11		328
-MX6Q_PAD_EIM_EB0__MIPI_CORE_DPHY_OUT_0		329
-MX6Q_PAD_EIM_EB0__CCM_PMIC_RDY			330
-MX6Q_PAD_EIM_EB0__GPIO_2_28			331
-MX6Q_PAD_EIM_EB0__TPSMP_HDATA_12		332
-MX6Q_PAD_EIM_EB0__SRC_BT_CFG_27			333
-MX6Q_PAD_EIM_EB1__WEIM_WEIM_EB_1		334
-MX6Q_PAD_EIM_EB1__IPU1_DISP1_DAT_10		335
-MX6Q_PAD_EIM_EB1__IPU2_CSI1_D_10		336
-MX6Q_PAD_EIM_EB1__MIPI_CORE_DPHY__OUT_1		337
-MX6Q_PAD_EIM_EB1__GPIO_2_29			338
-MX6Q_PAD_EIM_EB1__TPSMP_HDATA_13		339
-MX6Q_PAD_EIM_EB1__SRC_BT_CFG_28			340
-MX6Q_PAD_EIM_DA0__WEIM_WEIM_DA_A_0		341
-MX6Q_PAD_EIM_DA0__IPU1_DISP1_DAT_9		342
-MX6Q_PAD_EIM_DA0__IPU2_CSI1_D_9			343
-MX6Q_PAD_EIM_DA0__MIPI_CORE_DPHY__OUT_2		344
-MX6Q_PAD_EIM_DA0__GPIO_3_0			345
-MX6Q_PAD_EIM_DA0__TPSMP_HDATA_14		346
-MX6Q_PAD_EIM_DA0__SRC_BT_CFG_0			347
-MX6Q_PAD_EIM_DA1__WEIM_WEIM_DA_A_1		348
-MX6Q_PAD_EIM_DA1__IPU1_DISP1_DAT_8		349
-MX6Q_PAD_EIM_DA1__IPU2_CSI1_D_8			350
-MX6Q_PAD_EIM_DA1__MIPI_CORE_DPHY_OUT_3		351
-MX6Q_PAD_EIM_DA1__USBPHY1_TX_LS_MODE		352
-MX6Q_PAD_EIM_DA1__GPIO_3_1			353
-MX6Q_PAD_EIM_DA1__TPSMP_HDATA_15		354
-MX6Q_PAD_EIM_DA1__SRC_BT_CFG_1			355
-MX6Q_PAD_EIM_DA2__WEIM_WEIM_DA_A_2		356
-MX6Q_PAD_EIM_DA2__IPU1_DISP1_DAT_7		357
-MX6Q_PAD_EIM_DA2__IPU2_CSI1_D_7			358
-MX6Q_PAD_EIM_DA2__MIPI_CORE_DPHY_OUT_4		359
-MX6Q_PAD_EIM_DA2__USBPHY1_TX_HS_MODE		360
-MX6Q_PAD_EIM_DA2__GPIO_3_2			361
-MX6Q_PAD_EIM_DA2__TPSMP_HDATA_16		362
-MX6Q_PAD_EIM_DA2__SRC_BT_CFG_2			363
-MX6Q_PAD_EIM_DA3__WEIM_WEIM_DA_A_3		364
-MX6Q_PAD_EIM_DA3__IPU1_DISP1_DAT_6		365
-MX6Q_PAD_EIM_DA3__IPU2_CSI1_D_6			366
-MX6Q_PAD_EIM_DA3__MIPI_CORE_DPHY_OUT_5		367
-MX6Q_PAD_EIM_DA3__USBPHY1_TX_HIZ		368
-MX6Q_PAD_EIM_DA3__GPIO_3_3			369
-MX6Q_PAD_EIM_DA3__TPSMP_HDATA_17		370
-MX6Q_PAD_EIM_DA3__SRC_BT_CFG_3			371
-MX6Q_PAD_EIM_DA4__WEIM_WEIM_DA_A_4		372
-MX6Q_PAD_EIM_DA4__IPU1_DISP1_DAT_5		373
-MX6Q_PAD_EIM_DA4__IPU2_CSI1_D_5			374
-MX6Q_PAD_EIM_DA4__MIPI_CORE_DPHY_OUT_6		375
-MX6Q_PAD_EIM_DA4__ANATOP_USBPHY1_TX_EN		376
-MX6Q_PAD_EIM_DA4__GPIO_3_4			377
-MX6Q_PAD_EIM_DA4__TPSMP_HDATA_18		378
-MX6Q_PAD_EIM_DA4__SRC_BT_CFG_4			379
-MX6Q_PAD_EIM_DA5__WEIM_WEIM_DA_A_5		380
-MX6Q_PAD_EIM_DA5__IPU1_DISP1_DAT_4		381
-MX6Q_PAD_EIM_DA5__IPU2_CSI1_D_4			382
-MX6Q_PAD_EIM_DA5__MIPI_CORE_DPHY_OUT_7		383
-MX6Q_PAD_EIM_DA5__ANATOP_USBPHY1_TX_DP		384
-MX6Q_PAD_EIM_DA5__GPIO_3_5			385
-MX6Q_PAD_EIM_DA5__TPSMP_HDATA_19		386
-MX6Q_PAD_EIM_DA5__SRC_BT_CFG_5			387
-MX6Q_PAD_EIM_DA6__WEIM_WEIM_DA_A_6		388
-MX6Q_PAD_EIM_DA6__IPU1_DISP1_DAT_3		389
-MX6Q_PAD_EIM_DA6__IPU2_CSI1_D_3			390
-MX6Q_PAD_EIM_DA6__MIPI_CORE_DPHY_OUT_8		391
-MX6Q_PAD_EIM_DA6__ANATOP_USBPHY1_TX_DN		392
-MX6Q_PAD_EIM_DA6__GPIO_3_6			393
-MX6Q_PAD_EIM_DA6__TPSMP_HDATA_20		394
-MX6Q_PAD_EIM_DA6__SRC_BT_CFG_6			395
-MX6Q_PAD_EIM_DA7__WEIM_WEIM_DA_A_7		396
-MX6Q_PAD_EIM_DA7__IPU1_DISP1_DAT_2		397
-MX6Q_PAD_EIM_DA7__IPU2_CSI1_D_2			398
-MX6Q_PAD_EIM_DA7__MIPI_CORE_DPHY_OUT_9		399
-MX6Q_PAD_EIM_DA7__GPIO_3_7			400
-MX6Q_PAD_EIM_DA7__TPSMP_HDATA_21		401
-MX6Q_PAD_EIM_DA7__SRC_BT_CFG_7			402
-MX6Q_PAD_EIM_DA8__WEIM_WEIM_DA_A_8		403
-MX6Q_PAD_EIM_DA8__IPU1_DISP1_DAT_1		404
-MX6Q_PAD_EIM_DA8__IPU2_CSI1_D_1			405
-MX6Q_PAD_EIM_DA8__MIPI_CORE_DPHY_OUT_10		406
-MX6Q_PAD_EIM_DA8__GPIO_3_8			407
-MX6Q_PAD_EIM_DA8__TPSMP_HDATA_22		408
-MX6Q_PAD_EIM_DA8__SRC_BT_CFG_8			409
-MX6Q_PAD_EIM_DA9__WEIM_WEIM_DA_A_9		410
-MX6Q_PAD_EIM_DA9__IPU1_DISP1_DAT_0		411
-MX6Q_PAD_EIM_DA9__IPU2_CSI1_D_0			412
-MX6Q_PAD_EIM_DA9__MIPI_CORE_DPHY_OUT_11		413
-MX6Q_PAD_EIM_DA9__GPIO_3_9			414
-MX6Q_PAD_EIM_DA9__TPSMP_HDATA_23		415
-MX6Q_PAD_EIM_DA9__SRC_BT_CFG_9			416
-MX6Q_PAD_EIM_DA10__WEIM_WEIM_DA_A_10		417
-MX6Q_PAD_EIM_DA10__IPU1_DI1_PIN15		418
-MX6Q_PAD_EIM_DA10__IPU2_CSI1_DATA_EN		419
-MX6Q_PAD_EIM_DA10__MIPI_CORE_DPHY_OUT12		420
-MX6Q_PAD_EIM_DA10__GPIO_3_10			421
-MX6Q_PAD_EIM_DA10__TPSMP_HDATA_24		422
-MX6Q_PAD_EIM_DA10__SRC_BT_CFG_10		423
-MX6Q_PAD_EIM_DA11__WEIM_WEIM_DA_A_11		424
-MX6Q_PAD_EIM_DA11__IPU1_DI1_PIN2		425
-MX6Q_PAD_EIM_DA11__IPU2_CSI1_HSYNC		426
-MX6Q_PAD_EIM_DA11__MIPI_CORE_DPHY_OUT13		427
-MX6Q_PAD_EIM_DA11__SDMA_DBG_EVT_CHN_6		428
-MX6Q_PAD_EIM_DA11__GPIO_3_11			429
-MX6Q_PAD_EIM_DA11__TPSMP_HDATA_25		430
-MX6Q_PAD_EIM_DA11__SRC_BT_CFG_11		431
-MX6Q_PAD_EIM_DA12__WEIM_WEIM_DA_A_12		432
-MX6Q_PAD_EIM_DA12__IPU1_DI1_PIN3		433
-MX6Q_PAD_EIM_DA12__IPU2_CSI1_VSYNC		434
-MX6Q_PAD_EIM_DA12__MIPI_CORE_DPHY_OUT14		435
-MX6Q_PAD_EIM_DA12__SDMA_DEBUG_EVT_CHN_3		436
-MX6Q_PAD_EIM_DA12__GPIO_3_12			437
-MX6Q_PAD_EIM_DA12__TPSMP_HDATA_26		438
-MX6Q_PAD_EIM_DA12__SRC_BT_CFG_12		439
-MX6Q_PAD_EIM_DA13__WEIM_WEIM_DA_A_13		440
-MX6Q_PAD_EIM_DA13__IPU1_DI1_D0_CS		441
-MX6Q_PAD_EIM_DA13__CCM_DI1_EXT_CLK		442
-MX6Q_PAD_EIM_DA13__MIPI_CORE_DPHY_OUT15		443
-MX6Q_PAD_EIM_DA13__SDMA_DEBUG_EVT_CHN_4		444
-MX6Q_PAD_EIM_DA13__GPIO_3_13			445
-MX6Q_PAD_EIM_DA13__TPSMP_HDATA_27		446
-MX6Q_PAD_EIM_DA13__SRC_BT_CFG_13		447
-MX6Q_PAD_EIM_DA14__WEIM_WEIM_DA_A_14		448
-MX6Q_PAD_EIM_DA14__IPU1_DI1_D1_CS		449
-MX6Q_PAD_EIM_DA14__CCM_DI0_EXT_CLK		450
-MX6Q_PAD_EIM_DA14__MIPI_CORE_DPHY_OUT16		451
-MX6Q_PAD_EIM_DA14__SDMA_DEBUG_EVT_CHN_5		452
-MX6Q_PAD_EIM_DA14__GPIO_3_14			453
-MX6Q_PAD_EIM_DA14__TPSMP_HDATA_28		454
-MX6Q_PAD_EIM_DA14__SRC_BT_CFG_14		455
-MX6Q_PAD_EIM_DA15__WEIM_WEIM_DA_A_15		456
-MX6Q_PAD_EIM_DA15__IPU1_DI1_PIN1		457
-MX6Q_PAD_EIM_DA15__IPU1_DI1_PIN4		458
-MX6Q_PAD_EIM_DA15__MIPI_CORE_DPHY_OUT17		459
-MX6Q_PAD_EIM_DA15__GPIO_3_15			460
-MX6Q_PAD_EIM_DA15__TPSMP_HDATA_29		461
-MX6Q_PAD_EIM_DA15__SRC_BT_CFG_15		462
-MX6Q_PAD_EIM_WAIT__WEIM_WEIM_WAIT		463
-MX6Q_PAD_EIM_WAIT__WEIM_WEIM_DTACK_B		464
-MX6Q_PAD_EIM_WAIT__GPIO_5_0			465
-MX6Q_PAD_EIM_WAIT__TPSMP_HDATA_30		466
-MX6Q_PAD_EIM_WAIT__SRC_BT_CFG_25		467
-MX6Q_PAD_EIM_BCLK__WEIM_WEIM_BCLK		468
-MX6Q_PAD_EIM_BCLK__IPU1_DI1_PIN16		469
-MX6Q_PAD_EIM_BCLK__GPIO_6_31			470
-MX6Q_PAD_EIM_BCLK__TPSMP_HDATA_31		471
-MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DSP_CLK		472
-MX6Q_PAD_DI0_DISP_CLK__IPU2_DI0_DSP_CLK		473
-MX6Q_PAD_DI0_DISP_CLK__MIPI_CR_DPY_OT28		474
-MX6Q_PAD_DI0_DISP_CLK__SDMA_DBG_CR_STA0		475
-MX6Q_PAD_DI0_DISP_CLK__GPIO_4_16		476
-MX6Q_PAD_DI0_DISP_CLK__MMDC_DEBUG_0		477
-MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15		478
-MX6Q_PAD_DI0_PIN15__IPU2_DI0_PIN15		479
-MX6Q_PAD_DI0_PIN15__AUDMUX_AUD6_TXC		480
-MX6Q_PAD_DI0_PIN15__MIPI_CR_DPHY_OUT_29		481
-MX6Q_PAD_DI0_PIN15__SDMA_DBG_CORE_STA_1		482
-MX6Q_PAD_DI0_PIN15__GPIO_4_17			483
-MX6Q_PAD_DI0_PIN15__MMDC_MMDC_DEBUG_1		484
-MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN2		485
-MX6Q_PAD_DI0_PIN2__IPU2_DI0_PIN2		486
-MX6Q_PAD_DI0_PIN2__AUDMUX_AUD6_TXD		487
-MX6Q_PAD_DI0_PIN2__MIPI_CR_DPHY_OUT_30		488
-MX6Q_PAD_DI0_PIN2__SDMA_DBG_CORE_STA_2		489
-MX6Q_PAD_DI0_PIN2__GPIO_4_18			490
-MX6Q_PAD_DI0_PIN2__MMDC_DEBUG_2			491
-MX6Q_PAD_DI0_PIN2__PL301_PER1_HADDR_9		492
-MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN3		493
-MX6Q_PAD_DI0_PIN3__IPU2_DI0_PIN3		494
-MX6Q_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS		495
-MX6Q_PAD_DI0_PIN3__MIPI_CORE_DPHY_OUT31		496
-MX6Q_PAD_DI0_PIN3__SDMA_DBG_CORE_STA_3		497
-MX6Q_PAD_DI0_PIN3__GPIO_4_19			498
-MX6Q_PAD_DI0_PIN3__MMDC_MMDC_DEBUG_3		499
-MX6Q_PAD_DI0_PIN3__PL301_PER1_HADDR_10		500
-MX6Q_PAD_DI0_PIN4__IPU1_DI0_PIN4		501
-MX6Q_PAD_DI0_PIN4__IPU2_DI0_PIN4		502
-MX6Q_PAD_DI0_PIN4__AUDMUX_AUD6_RXD		503
-MX6Q_PAD_DI0_PIN4__USDHC1_WP			504
-MX6Q_PAD_DI0_PIN4__SDMA_DEBUG_YIELD		505
-MX6Q_PAD_DI0_PIN4__GPIO_4_20			506
-MX6Q_PAD_DI0_PIN4__MMDC_MMDC_DEBUG_4		507
-MX6Q_PAD_DI0_PIN4__PL301_PER1_HADDR_11		508
-MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0		509
-MX6Q_PAD_DISP0_DAT0__IPU2_DISP0_DAT_0		510
-MX6Q_PAD_DISP0_DAT0__ECSPI3_SCLK		511
-MX6Q_PAD_DISP0_DAT0__USDHC1_USDHC_DBG_0		512
-MX6Q_PAD_DISP0_DAT0__SDMA_DBG_CORE_RUN		513
-MX6Q_PAD_DISP0_DAT0__GPIO_4_21			514
-MX6Q_PAD_DISP0_DAT0__MMDC_MMDC_DEBUG_5		515
-MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1		516
-MX6Q_PAD_DISP0_DAT1__IPU2_DISP0_DAT_1		517
-MX6Q_PAD_DISP0_DAT1__ECSPI3_MOSI		518
-MX6Q_PAD_DISP0_DAT1__USDHC1_USDHC_DBG_1		519
-MX6Q_PAD_DISP0_DAT1__SDMA_DBG_EVT_CHNSL		520
-MX6Q_PAD_DISP0_DAT1__GPIO_4_22			521
-MX6Q_PAD_DISP0_DAT1__MMDC_DEBUG_6		522
-MX6Q_PAD_DISP0_DAT1__PL301_PER1_HADR_12		523
-MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2		524
-MX6Q_PAD_DISP0_DAT2__IPU2_DISP0_DAT_2		525
-MX6Q_PAD_DISP0_DAT2__ECSPI3_MISO		526
-MX6Q_PAD_DISP0_DAT2__USDHC1_USDHC_DBG_2		527
-MX6Q_PAD_DISP0_DAT2__SDMA_DEBUG_MODE		528
-MX6Q_PAD_DISP0_DAT2__GPIO_4_23			529
-MX6Q_PAD_DISP0_DAT2__MMDC_DEBUG_7		530
-MX6Q_PAD_DISP0_DAT2__PL301_PER1_HADR_13		531
-MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3		532
-MX6Q_PAD_DISP0_DAT3__IPU2_DISP0_DAT_3		533
-MX6Q_PAD_DISP0_DAT3__ECSPI3_SS0			534
-MX6Q_PAD_DISP0_DAT3__USDHC1_USDHC_DBG_3		535
-MX6Q_PAD_DISP0_DAT3__SDMA_DBG_BUS_ERROR		536
-MX6Q_PAD_DISP0_DAT3__GPIO_4_24			537
-MX6Q_PAD_DISP0_DAT3__MMDC_MMDC_DBG_8		538
-MX6Q_PAD_DISP0_DAT3__PL301_PER1_HADR_14		539
-MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4		540
-MX6Q_PAD_DISP0_DAT4__IPU2_DISP0_DAT_4		541
-MX6Q_PAD_DISP0_DAT4__ECSPI3_SS1			542
-MX6Q_PAD_DISP0_DAT4__USDHC1_USDHC_DBG_4		543
-MX6Q_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB		544
-MX6Q_PAD_DISP0_DAT4__GPIO_4_25			545
-MX6Q_PAD_DISP0_DAT4__MMDC_MMDC_DEBUG_9		546
-MX6Q_PAD_DISP0_DAT4__PL301_PER1_HADR_15		547
-MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5		548
-MX6Q_PAD_DISP0_DAT5__IPU2_DISP0_DAT_5		549
-MX6Q_PAD_DISP0_DAT5__ECSPI3_SS2			550
-MX6Q_PAD_DISP0_DAT5__AUDMUX_AUD6_RXFS		551
-MX6Q_PAD_DISP0_DAT5__SDMA_DBG_MCH_DMBUS		552
-MX6Q_PAD_DISP0_DAT5__GPIO_4_26			553
-MX6Q_PAD_DISP0_DAT5__MMDC_DEBUG_10		554
-MX6Q_PAD_DISP0_DAT5__PL301_PER1_HADR_16		555
-MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6		556
-MX6Q_PAD_DISP0_DAT6__IPU2_DISP0_DAT_6		557
-MX6Q_PAD_DISP0_DAT6__ECSPI3_SS3			558
-MX6Q_PAD_DISP0_DAT6__AUDMUX_AUD6_RXC		559
-MX6Q_PAD_DISP0_DAT6__SDMA_DBG_RTBUF_WRT		560
-MX6Q_PAD_DISP0_DAT6__GPIO_4_27			561
-MX6Q_PAD_DISP0_DAT6__MMDC_DEBUG_11		562
-MX6Q_PAD_DISP0_DAT6__PL301_PER1_HADR_17		563
-MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7		564
-MX6Q_PAD_DISP0_DAT7__IPU2_DISP0_DAT_7		565
-MX6Q_PAD_DISP0_DAT7__ECSPI3_RDY			566
-MX6Q_PAD_DISP0_DAT7__USDHC1_USDHC_DBG_5		567
-MX6Q_PAD_DISP0_DAT7__SDMA_DBG_EVT_CHN_0		568
-MX6Q_PAD_DISP0_DAT7__GPIO_4_28			569
-MX6Q_PAD_DISP0_DAT7__MMDC_DEBUG_12		570
-MX6Q_PAD_DISP0_DAT7__PL301_PER1_HADR_18		571
-MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8		572
-MX6Q_PAD_DISP0_DAT8__IPU2_DISP0_DAT_8		573
-MX6Q_PAD_DISP0_DAT8__PWM1_PWMO			574
-MX6Q_PAD_DISP0_DAT8__WDOG1_WDOG_B		575
-MX6Q_PAD_DISP0_DAT8__SDMA_DBG_EVT_CHN_1		576
-MX6Q_PAD_DISP0_DAT8__GPIO_4_29			577
-MX6Q_PAD_DISP0_DAT8__MMDC_DEBUG_13		578
-MX6Q_PAD_DISP0_DAT8__PL301_PER1_HADR_19		579
-MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9		580
-MX6Q_PAD_DISP0_DAT9__IPU2_DISP0_DAT_9		581
-MX6Q_PAD_DISP0_DAT9__PWM2_PWMO			582
-MX6Q_PAD_DISP0_DAT9__WDOG2_WDOG_B		583
-MX6Q_PAD_DISP0_DAT9__SDMA_DBG_EVT_CHN_2		584
-MX6Q_PAD_DISP0_DAT9__GPIO_4_30			585
-MX6Q_PAD_DISP0_DAT9__MMDC_DEBUG_14		586
-MX6Q_PAD_DISP0_DAT9__PL301_PER1_HADR_20		587
-MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10		588
-MX6Q_PAD_DISP0_DAT10__IPU2_DISP0_DAT_10		589
-MX6Q_PAD_DISP0_DAT10__USDHC1_DBG_6		590
-MX6Q_PAD_DISP0_DAT10__SDMA_DBG_EVT_CHN3		591
-MX6Q_PAD_DISP0_DAT10__GPIO_4_31			592
-MX6Q_PAD_DISP0_DAT10__MMDC_DEBUG_15		593
-MX6Q_PAD_DISP0_DAT10__PL301_PER1_HADR21		594
-MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11		595
-MX6Q_PAD_DISP0_DAT11__IPU2_DISP0_DAT_11		596
-MX6Q_PAD_DISP0_DAT11__USDHC1_USDHC_DBG7		597
-MX6Q_PAD_DISP0_DAT11__SDMA_DBG_EVT_CHN4		598
-MX6Q_PAD_DISP0_DAT11__GPIO_5_5			599
-MX6Q_PAD_DISP0_DAT11__MMDC_DEBUG_16		600
-MX6Q_PAD_DISP0_DAT11__PL301_PER1_HADR22		601
-MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12		602
-MX6Q_PAD_DISP0_DAT12__IPU2_DISP0_DAT_12		603
-MX6Q_PAD_DISP0_DAT12__RESERVED_RESERVED		604
-MX6Q_PAD_DISP0_DAT12__SDMA_DBG_EVT_CHN5		605
-MX6Q_PAD_DISP0_DAT12__GPIO_5_6			606
-MX6Q_PAD_DISP0_DAT12__MMDC_DEBUG_17		607
-MX6Q_PAD_DISP0_DAT12__PL301_PER1_HADR23		608
-MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13		609
-MX6Q_PAD_DISP0_DAT13__IPU2_DISP0_DAT_13		610
-MX6Q_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS		611
-MX6Q_PAD_DISP0_DAT13__SDMA_DBG_EVT_CHN0		612
-MX6Q_PAD_DISP0_DAT13__GPIO_5_7			613
-MX6Q_PAD_DISP0_DAT13__MMDC_DEBUG_18		614
-MX6Q_PAD_DISP0_DAT13__PL301_PER1_HADR24		615
-MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14		616
-MX6Q_PAD_DISP0_DAT14__IPU2_DISP0_DAT_14		617
-MX6Q_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC		618
-MX6Q_PAD_DISP0_DAT14__SDMA_DBG_EVT_CHN1		619
-MX6Q_PAD_DISP0_DAT14__GPIO_5_8			620
-MX6Q_PAD_DISP0_DAT14__MMDC_DEBUG_19		621
-MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15		622
-MX6Q_PAD_DISP0_DAT15__IPU2_DISP0_DAT_15		623
-MX6Q_PAD_DISP0_DAT15__ECSPI1_SS1		624
-MX6Q_PAD_DISP0_DAT15__ECSPI2_SS1		625
-MX6Q_PAD_DISP0_DAT15__SDMA_DBG_EVT_CHN2		626
-MX6Q_PAD_DISP0_DAT15__GPIO_5_9			627
-MX6Q_PAD_DISP0_DAT15__MMDC_DEBUG_20		628
-MX6Q_PAD_DISP0_DAT15__PL301_PER1_HADR25		629
-MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16		630
-MX6Q_PAD_DISP0_DAT16__IPU2_DISP0_DAT_16		631
-MX6Q_PAD_DISP0_DAT16__ECSPI2_MOSI		632
-MX6Q_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC		633
-MX6Q_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0		634
-MX6Q_PAD_DISP0_DAT16__GPIO_5_10			635
-MX6Q_PAD_DISP0_DAT16__MMDC_DEBUG_21		636
-MX6Q_PAD_DISP0_DAT16__PL301_PER1_HADR26		637
-MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17		638
-MX6Q_PAD_DISP0_DAT17__IPU2_DISP0_DAT_17		639
-MX6Q_PAD_DISP0_DAT17__ECSPI2_MISO		640
-MX6Q_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD		641
-MX6Q_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1		642
-MX6Q_PAD_DISP0_DAT17__GPIO_5_11			643
-MX6Q_PAD_DISP0_DAT17__MMDC_DEBUG_22		644
-MX6Q_PAD_DISP0_DAT17__PL301_PER1_HADR27		645
-MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18		646
-MX6Q_PAD_DISP0_DAT18__IPU2_DISP0_DAT_18		647
-MX6Q_PAD_DISP0_DAT18__ECSPI2_SS0		648
-MX6Q_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS		649
-MX6Q_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS		650
-MX6Q_PAD_DISP0_DAT18__GPIO_5_12			651
-MX6Q_PAD_DISP0_DAT18__MMDC_DEBUG_23		652
-MX6Q_PAD_DISP0_DAT18__WEIM_WEIM_CS_2		653
-MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19		654
-MX6Q_PAD_DISP0_DAT19__IPU2_DISP0_DAT_19		655
-MX6Q_PAD_DISP0_DAT19__ECSPI2_SCLK		656
-MX6Q_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD		657
-MX6Q_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC		658
-MX6Q_PAD_DISP0_DAT19__GPIO_5_13			659
-MX6Q_PAD_DISP0_DAT19__MMDC_DEBUG_24		660
-MX6Q_PAD_DISP0_DAT19__WEIM_WEIM_CS_3		661
-MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20		662
-MX6Q_PAD_DISP0_DAT20__IPU2_DISP0_DAT_20		663
-MX6Q_PAD_DISP0_DAT20__ECSPI1_SCLK		664
-MX6Q_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC		665
-MX6Q_PAD_DISP0_DAT20__SDMA_DBG_EVT_CHN7		666
-MX6Q_PAD_DISP0_DAT20__GPIO_5_14			667
-MX6Q_PAD_DISP0_DAT20__MMDC_DEBUG_25		668
-MX6Q_PAD_DISP0_DAT20__PL301_PER1_HADR28		669
-MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21		670
-MX6Q_PAD_DISP0_DAT21__IPU2_DISP0_DAT_21		671
-MX6Q_PAD_DISP0_DAT21__ECSPI1_MOSI		672
-MX6Q_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD		673
-MX6Q_PAD_DISP0_DAT21__SDMA_DBG_BUS_DEV0		674
-MX6Q_PAD_DISP0_DAT21__GPIO_5_15			675
-MX6Q_PAD_DISP0_DAT21__MMDC_DEBUG_26		676
-MX6Q_PAD_DISP0_DAT21__PL301_PER1_HADR29		677
-MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22		678
-MX6Q_PAD_DISP0_DAT22__IPU2_DISP0_DAT_22		679
-MX6Q_PAD_DISP0_DAT22__ECSPI1_MISO		680
-MX6Q_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS		681
-MX6Q_PAD_DISP0_DAT22__SDMA_DBG_BUS_DEV1		682
-MX6Q_PAD_DISP0_DAT22__GPIO_5_16			683
-MX6Q_PAD_DISP0_DAT22__MMDC_DEBUG_27		684
-MX6Q_PAD_DISP0_DAT22__PL301_PER1_HADR30		685
-MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23		686
-MX6Q_PAD_DISP0_DAT23__IPU2_DISP0_DAT_23		687
-MX6Q_PAD_DISP0_DAT23__ECSPI1_SS0		688
-MX6Q_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD		689
-MX6Q_PAD_DISP0_DAT23__SDMA_DBG_BUS_DEV2		690
-MX6Q_PAD_DISP0_DAT23__GPIO_5_17			691
-MX6Q_PAD_DISP0_DAT23__MMDC_DEBUG_28		692
-MX6Q_PAD_DISP0_DAT23__PL301_PER1_HADR31		693
-MX6Q_PAD_ENET_MDIO__RESERVED_RESERVED		694
-MX6Q_PAD_ENET_MDIO__ENET_MDIO			695
-MX6Q_PAD_ENET_MDIO__ESAI1_SCKR			696
-MX6Q_PAD_ENET_MDIO__SDMA_DEBUG_BUS_DEV3		697
-MX6Q_PAD_ENET_MDIO__ENET_1588_EVT1_OUT		698
-MX6Q_PAD_ENET_MDIO__GPIO_1_22			699
-MX6Q_PAD_ENET_MDIO__SPDIF_PLOCK			700
-MX6Q_PAD_ENET_REF_CLK__RESERVED_RSRVED		701
-MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK		702
-MX6Q_PAD_ENET_REF_CLK__ESAI1_FSR		703
-MX6Q_PAD_ENET_REF_CLK__SDMA_DBGBUS_DEV4		704
-MX6Q_PAD_ENET_REF_CLK__GPIO_1_23		705
-MX6Q_PAD_ENET_REF_CLK__SPDIF_SRCLK		706
-MX6Q_PAD_ENET_REF_CLK__USBPHY1_RX_SQH		707
-MX6Q_PAD_ENET_RX_ER__ENET_RX_ER			708
-MX6Q_PAD_ENET_RX_ER__ESAI1_HCKR			709
-MX6Q_PAD_ENET_RX_ER__SPDIF_IN1			710
-MX6Q_PAD_ENET_RX_ER__ENET_1588_EVT2_OUT		711
-MX6Q_PAD_ENET_RX_ER__GPIO_1_24			712
-MX6Q_PAD_ENET_RX_ER__PHY_TDI			713
-MX6Q_PAD_ENET_RX_ER__USBPHY1_RX_HS_RXD		714
-MX6Q_PAD_ENET_CRS_DV__RESERVED_RSRVED		715
-MX6Q_PAD_ENET_CRS_DV__ENET_RX_EN		716
-MX6Q_PAD_ENET_CRS_DV__ESAI1_SCKT		717
-MX6Q_PAD_ENET_CRS_DV__SPDIF_EXTCLK		718
-MX6Q_PAD_ENET_CRS_DV__GPIO_1_25			719
-MX6Q_PAD_ENET_CRS_DV__PHY_TDO			720
-MX6Q_PAD_ENET_CRS_DV__USBPHY1_RX_FS_RXD		721
-MX6Q_PAD_ENET_RXD1__MLB_MLBSIG			722
-MX6Q_PAD_ENET_RXD1__ENET_RDATA_1		723
-MX6Q_PAD_ENET_RXD1__ESAI1_FST			724
-MX6Q_PAD_ENET_RXD1__ENET_1588_EVT3_OUT		725
-MX6Q_PAD_ENET_RXD1__GPIO_1_26			726
-MX6Q_PAD_ENET_RXD1__PHY_TCK			727
-MX6Q_PAD_ENET_RXD1__USBPHY1_RX_DISCON		728
-MX6Q_PAD_ENET_RXD0__OSC32K_32K_OUT		729
-MX6Q_PAD_ENET_RXD0__ENET_RDATA_0		730
-MX6Q_PAD_ENET_RXD0__ESAI1_HCKT			731
-MX6Q_PAD_ENET_RXD0__SPDIF_OUT1			732
-MX6Q_PAD_ENET_RXD0__GPIO_1_27			733
-MX6Q_PAD_ENET_RXD0__PHY_TMS			734
-MX6Q_PAD_ENET_RXD0__USBPHY1_PLL_CK20DIV		735
-MX6Q_PAD_ENET_TX_EN__RESERVED_RSRVED		736
-MX6Q_PAD_ENET_TX_EN__ENET_TX_EN			737
-MX6Q_PAD_ENET_TX_EN__ESAI1_TX3_RX2		738
-MX6Q_PAD_ENET_TX_EN__GPIO_1_28			739
-MX6Q_PAD_ENET_TX_EN__SATA_PHY_TDI		740
-MX6Q_PAD_ENET_TX_EN__USBPHY2_RX_SQH		741
-MX6Q_PAD_ENET_TXD1__MLB_MLBCLK			742
-MX6Q_PAD_ENET_TXD1__ENET_TDATA_1		743
-MX6Q_PAD_ENET_TXD1__ESAI1_TX2_RX3		744
-MX6Q_PAD_ENET_TXD1__ENET_1588_EVENT0_IN		745
-MX6Q_PAD_ENET_TXD1__GPIO_1_29			746
-MX6Q_PAD_ENET_TXD1__SATA_PHY_TDO		747
-MX6Q_PAD_ENET_TXD1__USBPHY2_RX_HS_RXD		748
-MX6Q_PAD_ENET_TXD0__RESERVED_RSRVED		749
-MX6Q_PAD_ENET_TXD0__ENET_TDATA_0		750
-MX6Q_PAD_ENET_TXD0__ESAI1_TX4_RX1		751
-MX6Q_PAD_ENET_TXD0__GPIO_1_30			752
-MX6Q_PAD_ENET_TXD0__SATA_PHY_TCK		753
-MX6Q_PAD_ENET_TXD0__USBPHY2_RX_FS_RXD		754
-MX6Q_PAD_ENET_MDC__MLB_MLBDAT			755
-MX6Q_PAD_ENET_MDC__ENET_MDC			756
-MX6Q_PAD_ENET_MDC__ESAI1_TX5_RX0		757
-MX6Q_PAD_ENET_MDC__ENET_1588_EVENT1_IN		758
-MX6Q_PAD_ENET_MDC__GPIO_1_31			759
-MX6Q_PAD_ENET_MDC__SATA_PHY_TMS			760
-MX6Q_PAD_ENET_MDC__USBPHY2_RX_DISCON		761
-MX6Q_PAD_DRAM_D40__MMDC_DRAM_D_40		762
-MX6Q_PAD_DRAM_D41__MMDC_DRAM_D_41		763
-MX6Q_PAD_DRAM_D42__MMDC_DRAM_D_42		764
-MX6Q_PAD_DRAM_D43__MMDC_DRAM_D_43		765
-MX6Q_PAD_DRAM_D44__MMDC_DRAM_D_44		766
-MX6Q_PAD_DRAM_D45__MMDC_DRAM_D_45		767
-MX6Q_PAD_DRAM_D46__MMDC_DRAM_D_46		768
-MX6Q_PAD_DRAM_D47__MMDC_DRAM_D_47		769
-MX6Q_PAD_DRAM_SDQS5__MMDC_DRAM_SDQS_5		770
-MX6Q_PAD_DRAM_DQM5__MMDC_DRAM_DQM_5		771
-MX6Q_PAD_DRAM_D32__MMDC_DRAM_D_32		772
-MX6Q_PAD_DRAM_D33__MMDC_DRAM_D_33		773
-MX6Q_PAD_DRAM_D34__MMDC_DRAM_D_34		774
-MX6Q_PAD_DRAM_D35__MMDC_DRAM_D_35		775
-MX6Q_PAD_DRAM_D36__MMDC_DRAM_D_36		776
-MX6Q_PAD_DRAM_D37__MMDC_DRAM_D_37		777
-MX6Q_PAD_DRAM_D38__MMDC_DRAM_D_38		778
-MX6Q_PAD_DRAM_D39__MMDC_DRAM_D_39		779
-MX6Q_PAD_DRAM_DQM4__MMDC_DRAM_DQM_4		780
-MX6Q_PAD_DRAM_SDQS4__MMDC_DRAM_SDQS_4		781
-MX6Q_PAD_DRAM_D24__MMDC_DRAM_D_24		782
-MX6Q_PAD_DRAM_D25__MMDC_DRAM_D_25		783
-MX6Q_PAD_DRAM_D26__MMDC_DRAM_D_26		784
-MX6Q_PAD_DRAM_D27__MMDC_DRAM_D_27		785
-MX6Q_PAD_DRAM_D28__MMDC_DRAM_D_28		786
-MX6Q_PAD_DRAM_D29__MMDC_DRAM_D_29		787
-MX6Q_PAD_DRAM_SDQS3__MMDC_DRAM_SDQS_3		788
-MX6Q_PAD_DRAM_D30__MMDC_DRAM_D_30		789
-MX6Q_PAD_DRAM_D31__MMDC_DRAM_D_31		790
-MX6Q_PAD_DRAM_DQM3__MMDC_DRAM_DQM_3		791
-MX6Q_PAD_DRAM_D16__MMDC_DRAM_D_16		792
-MX6Q_PAD_DRAM_D17__MMDC_DRAM_D_17		793
-MX6Q_PAD_DRAM_D18__MMDC_DRAM_D_18		794
-MX6Q_PAD_DRAM_D19__MMDC_DRAM_D_19		795
-MX6Q_PAD_DRAM_D20__MMDC_DRAM_D_20		796
-MX6Q_PAD_DRAM_D21__MMDC_DRAM_D_21		797
-MX6Q_PAD_DRAM_D22__MMDC_DRAM_D_22		798
-MX6Q_PAD_DRAM_SDQS2__MMDC_DRAM_SDQS_2		799
-MX6Q_PAD_DRAM_D23__MMDC_DRAM_D_23		800
-MX6Q_PAD_DRAM_DQM2__MMDC_DRAM_DQM_2		801
-MX6Q_PAD_DRAM_A0__MMDC_DRAM_A_0			802
-MX6Q_PAD_DRAM_A1__MMDC_DRAM_A_1			803
-MX6Q_PAD_DRAM_A2__MMDC_DRAM_A_2			804
-MX6Q_PAD_DRAM_A3__MMDC_DRAM_A_3			805
-MX6Q_PAD_DRAM_A4__MMDC_DRAM_A_4			806
-MX6Q_PAD_DRAM_A5__MMDC_DRAM_A_5			807
-MX6Q_PAD_DRAM_A6__MMDC_DRAM_A_6			808
-MX6Q_PAD_DRAM_A7__MMDC_DRAM_A_7			809
-MX6Q_PAD_DRAM_A8__MMDC_DRAM_A_8			810
-MX6Q_PAD_DRAM_A9__MMDC_DRAM_A_9			811
-MX6Q_PAD_DRAM_A10__MMDC_DRAM_A_10		812
-MX6Q_PAD_DRAM_A11__MMDC_DRAM_A_11		813
-MX6Q_PAD_DRAM_A12__MMDC_DRAM_A_12		814
-MX6Q_PAD_DRAM_A13__MMDC_DRAM_A_13		815
-MX6Q_PAD_DRAM_A14__MMDC_DRAM_A_14		816
-MX6Q_PAD_DRAM_A15__MMDC_DRAM_A_15		817
-MX6Q_PAD_DRAM_CAS__MMDC_DRAM_CAS		818
-MX6Q_PAD_DRAM_CS0__MMDC_DRAM_CS_0		819
-MX6Q_PAD_DRAM_CS1__MMDC_DRAM_CS_1		820
-MX6Q_PAD_DRAM_RAS__MMDC_DRAM_RAS		821
-MX6Q_PAD_DRAM_RESET__MMDC_DRAM_RESET		822
-MX6Q_PAD_DRAM_SDBA0__MMDC_DRAM_SDBA_0		823
-MX6Q_PAD_DRAM_SDBA1__MMDC_DRAM_SDBA_1		824
-MX6Q_PAD_DRAM_SDCLK_0__MMDC_DRAM_SDCLK0		825
-MX6Q_PAD_DRAM_SDBA2__MMDC_DRAM_SDBA_2		826
-MX6Q_PAD_DRAM_SDCKE0__MMDC_DRAM_SDCKE_0		827
-MX6Q_PAD_DRAM_SDCLK_1__MMDC_DRAM_SDCLK1		828
-MX6Q_PAD_DRAM_SDCKE1__MMDC_DRAM_SDCKE_1		829
-MX6Q_PAD_DRAM_SDODT0__MMDC_DRAM_ODT_0		830
-MX6Q_PAD_DRAM_SDODT1__MMDC_DRAM_ODT_1		831
-MX6Q_PAD_DRAM_SDWE__MMDC_DRAM_SDWE		832
-MX6Q_PAD_DRAM_D0__MMDC_DRAM_D_0			833
-MX6Q_PAD_DRAM_D1__MMDC_DRAM_D_1			834
-MX6Q_PAD_DRAM_D2__MMDC_DRAM_D_2			835
-MX6Q_PAD_DRAM_D3__MMDC_DRAM_D_3			836
-MX6Q_PAD_DRAM_D4__MMDC_DRAM_D_4			837
-MX6Q_PAD_DRAM_D5__MMDC_DRAM_D_5			838
-MX6Q_PAD_DRAM_SDQS0__MMDC_DRAM_SDQS_0		839
-MX6Q_PAD_DRAM_D6__MMDC_DRAM_D_6			840
-MX6Q_PAD_DRAM_D7__MMDC_DRAM_D_7			841
-MX6Q_PAD_DRAM_DQM0__MMDC_DRAM_DQM_0		842
-MX6Q_PAD_DRAM_D8__MMDC_DRAM_D_8			843
-MX6Q_PAD_DRAM_D9__MMDC_DRAM_D_9			844
-MX6Q_PAD_DRAM_D10__MMDC_DRAM_D_10		845
-MX6Q_PAD_DRAM_D11__MMDC_DRAM_D_11		846
-MX6Q_PAD_DRAM_D12__MMDC_DRAM_D_12		847
-MX6Q_PAD_DRAM_D13__MMDC_DRAM_D_13		848
-MX6Q_PAD_DRAM_D14__MMDC_DRAM_D_14		849
-MX6Q_PAD_DRAM_SDQS1__MMDC_DRAM_SDQS_1		850
-MX6Q_PAD_DRAM_D15__MMDC_DRAM_D_15		851
-MX6Q_PAD_DRAM_DQM1__MMDC_DRAM_DQM_1		852
-MX6Q_PAD_DRAM_D48__MMDC_DRAM_D_48		853
-MX6Q_PAD_DRAM_D49__MMDC_DRAM_D_49		854
-MX6Q_PAD_DRAM_D50__MMDC_DRAM_D_50		855
-MX6Q_PAD_DRAM_D51__MMDC_DRAM_D_51		856
-MX6Q_PAD_DRAM_D52__MMDC_DRAM_D_52		857
-MX6Q_PAD_DRAM_D53__MMDC_DRAM_D_53		858
-MX6Q_PAD_DRAM_D54__MMDC_DRAM_D_54		859
-MX6Q_PAD_DRAM_D55__MMDC_DRAM_D_55		860
-MX6Q_PAD_DRAM_SDQS6__MMDC_DRAM_SDQS_6		861
-MX6Q_PAD_DRAM_DQM6__MMDC_DRAM_DQM_6		862
-MX6Q_PAD_DRAM_D56__MMDC_DRAM_D_56		863
-MX6Q_PAD_DRAM_SDQS7__MMDC_DRAM_SDQS_7		864
-MX6Q_PAD_DRAM_D57__MMDC_DRAM_D_57		865
-MX6Q_PAD_DRAM_D58__MMDC_DRAM_D_58		866
-MX6Q_PAD_DRAM_D59__MMDC_DRAM_D_59		867
-MX6Q_PAD_DRAM_D60__MMDC_DRAM_D_60		868
-MX6Q_PAD_DRAM_DQM7__MMDC_DRAM_DQM_7		869
-MX6Q_PAD_DRAM_D61__MMDC_DRAM_D_61		870
-MX6Q_PAD_DRAM_D62__MMDC_DRAM_D_62		871
-MX6Q_PAD_DRAM_D63__MMDC_DRAM_D_63		872
-MX6Q_PAD_KEY_COL0__ECSPI1_SCLK			873
-MX6Q_PAD_KEY_COL0__ENET_RDATA_3			874
-MX6Q_PAD_KEY_COL0__AUDMUX_AUD5_TXC		875
-MX6Q_PAD_KEY_COL0__KPP_COL_0			876
-MX6Q_PAD_KEY_COL0__UART4_TXD			877
-MX6Q_PAD_KEY_COL0__GPIO_4_6			878
-MX6Q_PAD_KEY_COL0__DCIC1_DCIC_OUT		879
-MX6Q_PAD_KEY_COL0__SRC_ANY_PU_RST		880
-MX6Q_PAD_KEY_ROW0__ECSPI1_MOSI			881
-MX6Q_PAD_KEY_ROW0__ENET_TDATA_3			882
-MX6Q_PAD_KEY_ROW0__AUDMUX_AUD5_TXD		883
-MX6Q_PAD_KEY_ROW0__KPP_ROW_0			884
-MX6Q_PAD_KEY_ROW0__UART4_RXD			885
-MX6Q_PAD_KEY_ROW0__GPIO_4_7			886
-MX6Q_PAD_KEY_ROW0__DCIC2_DCIC_OUT		887
-MX6Q_PAD_KEY_ROW0__PL301_PER1_HADR_0		888
-MX6Q_PAD_KEY_COL1__ECSPI1_MISO			889
-MX6Q_PAD_KEY_COL1__ENET_MDIO			890
-MX6Q_PAD_KEY_COL1__AUDMUX_AUD5_TXFS		891
-MX6Q_PAD_KEY_COL1__KPP_COL_1			892
-MX6Q_PAD_KEY_COL1__UART5_TXD			893
-MX6Q_PAD_KEY_COL1__GPIO_4_8			894
-MX6Q_PAD_KEY_COL1__USDHC1_VSELECT		895
-MX6Q_PAD_KEY_COL1__PL301MX_PER1_HADR_1		896
-MX6Q_PAD_KEY_ROW1__ECSPI1_SS0			897
-MX6Q_PAD_KEY_ROW1__ENET_COL			898
-MX6Q_PAD_KEY_ROW1__AUDMUX_AUD5_RXD		899
-MX6Q_PAD_KEY_ROW1__KPP_ROW_1			900
-MX6Q_PAD_KEY_ROW1__UART5_RXD			901
-MX6Q_PAD_KEY_ROW1__GPIO_4_9			902
-MX6Q_PAD_KEY_ROW1__USDHC2_VSELECT		903
-MX6Q_PAD_KEY_ROW1__PL301_PER1_HADDR_2		904
-MX6Q_PAD_KEY_COL2__ECSPI1_SS1			905
-MX6Q_PAD_KEY_COL2__ENET_RDATA_2			906
-MX6Q_PAD_KEY_COL2__CAN1_TXCAN			907
-MX6Q_PAD_KEY_COL2__KPP_COL_2			908
-MX6Q_PAD_KEY_COL2__ENET_MDC			909
-MX6Q_PAD_KEY_COL2__GPIO_4_10			910
-MX6Q_PAD_KEY_COL2__USBOH3_H1_PWRCTL_WKP		911
-MX6Q_PAD_KEY_COL2__PL301_PER1_HADDR_3		912
-MX6Q_PAD_KEY_ROW2__ECSPI1_SS2			913
-MX6Q_PAD_KEY_ROW2__ENET_TDATA_2			914
-MX6Q_PAD_KEY_ROW2__CAN1_RXCAN			915
-MX6Q_PAD_KEY_ROW2__KPP_ROW_2			916
-MX6Q_PAD_KEY_ROW2__USDHC2_VSELECT		917
-MX6Q_PAD_KEY_ROW2__GPIO_4_11			918
-MX6Q_PAD_KEY_ROW2__HDMI_TX_CEC_LINE		919
-MX6Q_PAD_KEY_ROW2__PL301_PER1_HADR_4		920
-MX6Q_PAD_KEY_COL3__ECSPI1_SS3			921
-MX6Q_PAD_KEY_COL3__ENET_CRS			922
-MX6Q_PAD_KEY_COL3__HDMI_TX_DDC_SCL		923
-MX6Q_PAD_KEY_COL3__KPP_COL_3			924
-MX6Q_PAD_KEY_COL3__I2C2_SCL			925
-MX6Q_PAD_KEY_COL3__GPIO_4_12			926
-MX6Q_PAD_KEY_COL3__SPDIF_IN1			927
-MX6Q_PAD_KEY_COL3__PL301_PER1_HADR_5		928
-MX6Q_PAD_KEY_ROW3__OSC32K_32K_OUT		929
-MX6Q_PAD_KEY_ROW3__ASRC_ASRC_EXT_CLK		930
-MX6Q_PAD_KEY_ROW3__HDMI_TX_DDC_SDA		931
-MX6Q_PAD_KEY_ROW3__KPP_ROW_3			932
-MX6Q_PAD_KEY_ROW3__I2C2_SDA			933
-MX6Q_PAD_KEY_ROW3__GPIO_4_13			934
-MX6Q_PAD_KEY_ROW3__USDHC1_VSELECT		935
-MX6Q_PAD_KEY_ROW3__PL301_PER1_HADR_6		936
-MX6Q_PAD_KEY_COL4__CAN2_TXCAN			937
-MX6Q_PAD_KEY_COL4__IPU1_SISG_4			938
-MX6Q_PAD_KEY_COL4__USBOH3_USBOTG_OC		939
-MX6Q_PAD_KEY_COL4__KPP_COL_4			940
-MX6Q_PAD_KEY_COL4__UART5_RTS			941
-MX6Q_PAD_KEY_COL4__GPIO_4_14			942
-MX6Q_PAD_KEY_COL4__MMDC_DEBUG_49		943
-MX6Q_PAD_KEY_COL4__PL301_PER1_HADDR_7		944
-MX6Q_PAD_KEY_ROW4__CAN2_RXCAN			945
-MX6Q_PAD_KEY_ROW4__IPU1_SISG_5			946
-MX6Q_PAD_KEY_ROW4__USBOH3_USBOTG_PWR		947
-MX6Q_PAD_KEY_ROW4__KPP_ROW_4			948
-MX6Q_PAD_KEY_ROW4__UART5_CTS			949
-MX6Q_PAD_KEY_ROW4__GPIO_4_15			950
-MX6Q_PAD_KEY_ROW4__MMDC_DEBUG_50		951
-MX6Q_PAD_KEY_ROW4__PL301_PER1_HADR_8		952
-MX6Q_PAD_GPIO_0__CCM_CLKO			953
-MX6Q_PAD_GPIO_0__KPP_COL_5			954
-MX6Q_PAD_GPIO_0__ASRC_ASRC_EXT_CLK		955
-MX6Q_PAD_GPIO_0__EPIT1_EPITO			956
-MX6Q_PAD_GPIO_0__GPIO_1_0			957
-MX6Q_PAD_GPIO_0__USBOH3_USBH1_PWR		958
-MX6Q_PAD_GPIO_0__SNVS_HP_WRAP_SNVS_VIO5		959
-MX6Q_PAD_GPIO_1__ESAI1_SCKR			960
-MX6Q_PAD_GPIO_1__WDOG2_WDOG_B			961
-MX6Q_PAD_GPIO_1__KPP_ROW_5			962
-MX6Q_PAD_GPIO_1__PWM2_PWMO			963
-MX6Q_PAD_GPIO_1__GPIO_1_1			964
-MX6Q_PAD_GPIO_1__USDHC1_CD			965
-MX6Q_PAD_GPIO_1__SRC_TESTER_ACK			966
-MX6Q_PAD_GPIO_9__ESAI1_FSR			967
-MX6Q_PAD_GPIO_9__WDOG1_WDOG_B			968
-MX6Q_PAD_GPIO_9__KPP_COL_6			969
-MX6Q_PAD_GPIO_9__CCM_REF_EN_B			970
-MX6Q_PAD_GPIO_9__PWM1_PWMO			971
-MX6Q_PAD_GPIO_9__GPIO_1_9			972
-MX6Q_PAD_GPIO_9__USDHC1_WP			973
-MX6Q_PAD_GPIO_9__SRC_EARLY_RST			974
-MX6Q_PAD_GPIO_3__ESAI1_HCKR			975
-MX6Q_PAD_GPIO_3__OBSERVE_MUX_INT_OUT0		976
-MX6Q_PAD_GPIO_3__I2C3_SCL			977
-MX6Q_PAD_GPIO_3__ANATOP_24M_OUT			978
-MX6Q_PAD_GPIO_3__CCM_CLKO2			979
-MX6Q_PAD_GPIO_3__GPIO_1_3			980
-MX6Q_PAD_GPIO_3__USBOH3_USBH1_OC		981
-MX6Q_PAD_GPIO_3__MLB_MLBCLK			982
-MX6Q_PAD_GPIO_6__ESAI1_SCKT			983
-MX6Q_PAD_GPIO_6__OBSERVE_MUX_INT_OUT1		984
-MX6Q_PAD_GPIO_6__I2C3_SDA			985
-MX6Q_PAD_GPIO_6__CCM_CCM_OUT_0			986
-MX6Q_PAD_GPIO_6__CSU_CSU_INT_DEB		987
-MX6Q_PAD_GPIO_6__GPIO_1_6			988
-MX6Q_PAD_GPIO_6__USDHC2_LCTL			989
-MX6Q_PAD_GPIO_6__MLB_MLBSIG			990
-MX6Q_PAD_GPIO_2__ESAI1_FST			991
-MX6Q_PAD_GPIO_2__OBSERVE_MUX_INT_OUT2		992
-MX6Q_PAD_GPIO_2__KPP_ROW_6			993
-MX6Q_PAD_GPIO_2__CCM_CCM_OUT_1			994
-MX6Q_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0		995
-MX6Q_PAD_GPIO_2__GPIO_1_2			996
-MX6Q_PAD_GPIO_2__USDHC2_WP			997
-MX6Q_PAD_GPIO_2__MLB_MLBDAT			998
-MX6Q_PAD_GPIO_4__ESAI1_HCKT			999
-MX6Q_PAD_GPIO_4__OBSERVE_MUX_INT_OUT3		1000
-MX6Q_PAD_GPIO_4__KPP_COL_7			1001
-MX6Q_PAD_GPIO_4__CCM_CCM_OUT_2			1002
-MX6Q_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1		1003
-MX6Q_PAD_GPIO_4__GPIO_1_4			1004
-MX6Q_PAD_GPIO_4__USDHC2_CD			1005
-MX6Q_PAD_GPIO_4__OCOTP_CRL_WRAR_FUSE_LA		1006
-MX6Q_PAD_GPIO_5__ESAI1_TX2_RX3			1007
-MX6Q_PAD_GPIO_5__OBSERVE_MUX_INT_OUT4		1008
-MX6Q_PAD_GPIO_5__KPP_ROW_7			1009
-MX6Q_PAD_GPIO_5__CCM_CLKO			1010
-MX6Q_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2		1011
-MX6Q_PAD_GPIO_5__GPIO_1_5			1012
-MX6Q_PAD_GPIO_5__I2C3_SCL			1013
-MX6Q_PAD_GPIO_5__CHEETAH_EVENTI			1014
-MX6Q_PAD_GPIO_7__ESAI1_TX4_RX1			1015
-MX6Q_PAD_GPIO_7__ECSPI5_RDY			1016
-MX6Q_PAD_GPIO_7__EPIT1_EPITO			1017
-MX6Q_PAD_GPIO_7__CAN1_TXCAN			1018
-MX6Q_PAD_GPIO_7__UART2_TXD			1019
-MX6Q_PAD_GPIO_7__GPIO_1_7			1020
-MX6Q_PAD_GPIO_7__SPDIF_PLOCK			1021
-MX6Q_PAD_GPIO_7__USBOH3_OTGUSB_HST_MODE		1022
-MX6Q_PAD_GPIO_8__ESAI1_TX5_RX0			1023
-MX6Q_PAD_GPIO_8__ANATOP_ANATOP_32K_OUT		1024
-MX6Q_PAD_GPIO_8__EPIT2_EPITO			1025
-MX6Q_PAD_GPIO_8__CAN1_RXCAN			1026
-MX6Q_PAD_GPIO_8__UART2_RXD			1027
-MX6Q_PAD_GPIO_8__GPIO_1_8			1028
-MX6Q_PAD_GPIO_8__SPDIF_SRCLK			1029
-MX6Q_PAD_GPIO_8__USBOH3_OTG_PWRCTL_WAK		1030
-MX6Q_PAD_GPIO_16__ESAI1_TX3_RX2			1031
-MX6Q_PAD_GPIO_16__ENET_1588_EVENT2_IN		1032
-MX6Q_PAD_GPIO_16__ENET_ETHERNET_REF_OUT		1033
-MX6Q_PAD_GPIO_16__USDHC1_LCTL			1034
-MX6Q_PAD_GPIO_16__SPDIF_IN1			1035
-MX6Q_PAD_GPIO_16__GPIO_7_11			1036
-MX6Q_PAD_GPIO_16__I2C3_SDA			1037
-MX6Q_PAD_GPIO_16__SJC_DE_B			1038
-MX6Q_PAD_GPIO_17__ESAI1_TX0			1039
-MX6Q_PAD_GPIO_17__ENET_1588_EVENT3_IN		1040
-MX6Q_PAD_GPIO_17__CCM_PMIC_RDY			1041
-MX6Q_PAD_GPIO_17__SDMA_SDMA_EXT_EVENT_0		1042
-MX6Q_PAD_GPIO_17__SPDIF_OUT1			1043
-MX6Q_PAD_GPIO_17__GPIO_7_12			1044
-MX6Q_PAD_GPIO_17__SJC_JTAG_ACT			1045
-MX6Q_PAD_GPIO_18__ESAI1_TX1			1046
-MX6Q_PAD_GPIO_18__ENET_RX_CLK			1047
-MX6Q_PAD_GPIO_18__USDHC3_VSELECT		1048
-MX6Q_PAD_GPIO_18__SDMA_SDMA_EXT_EVENT_1		1049
-MX6Q_PAD_GPIO_18__ASRC_ASRC_EXT_CLK		1050
-MX6Q_PAD_GPIO_18__GPIO_7_13			1051
-MX6Q_PAD_GPIO_18__SNVS_HP_WRA_SNVS_VIO5		1052
-MX6Q_PAD_GPIO_18__SRC_SYSTEM_RST		1053
-MX6Q_PAD_GPIO_19__KPP_COL_5			1054
-MX6Q_PAD_GPIO_19__ENET_1588_EVENT0_OUT		1055
-MX6Q_PAD_GPIO_19__SPDIF_OUT1			1056
-MX6Q_PAD_GPIO_19__CCM_CLKO			1057
-MX6Q_PAD_GPIO_19__ECSPI1_RDY			1058
-MX6Q_PAD_GPIO_19__GPIO_4_5			1059
-MX6Q_PAD_GPIO_19__ENET_TX_ER			1060
-MX6Q_PAD_GPIO_19__SRC_INT_BOOT			1061
-MX6Q_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK		1062
-MX6Q_PAD_CSI0_PIXCLK__PCIE_CTRL_MUX_12		1063
-MX6Q_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0		1064
-MX6Q_PAD_CSI0_PIXCLK__GPIO_5_18			1065
-MX6Q_PAD_CSI0_PIXCLK___MMDC_DEBUG_29		1066
-MX6Q_PAD_CSI0_PIXCLK__CHEETAH_EVENTO		1067
-MX6Q_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC		1068
-MX6Q_PAD_CSI0_MCLK__PCIE_CTRL_MUX_13		1069
-MX6Q_PAD_CSI0_MCLK__CCM_CLKO			1070
-MX6Q_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1		1071
-MX6Q_PAD_CSI0_MCLK__GPIO_5_19			1072
-MX6Q_PAD_CSI0_MCLK__MMDC_MMDC_DEBUG_30		1073
-MX6Q_PAD_CSI0_MCLK__CHEETAH_TRCTL		1074
-MX6Q_PAD_CSI0_DATA_EN__IPU1_CSI0_DA_EN		1075
-MX6Q_PAD_CSI0_DATA_EN__WEIM_WEIM_D_0		1076
-MX6Q_PAD_CSI0_DATA_EN__PCIE_CTRL_MUX_14		1077
-MX6Q_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2		1078
-MX6Q_PAD_CSI0_DATA_EN__GPIO_5_20		1079
-MX6Q_PAD_CSI0_DATA_EN__MMDC_DEBUG_31		1080
-MX6Q_PAD_CSI0_DATA_EN__CHEETAH_TRCLK		1081
-MX6Q_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC		1082
-MX6Q_PAD_CSI0_VSYNC__WEIM_WEIM_D_1		1083
-MX6Q_PAD_CSI0_VSYNC__PCIE_CTRL_MUX_15		1084
-MX6Q_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3		1085
-MX6Q_PAD_CSI0_VSYNC__GPIO_5_21			1086
-MX6Q_PAD_CSI0_VSYNC__MMDC_DEBUG_32		1087
-MX6Q_PAD_CSI0_VSYNC__CHEETAH_TRACE_0		1088
-MX6Q_PAD_CSI0_DAT4__IPU1_CSI0_D_4		1089
-MX6Q_PAD_CSI0_DAT4__WEIM_WEIM_D_2		1090
-MX6Q_PAD_CSI0_DAT4__ECSPI1_SCLK			1091
-MX6Q_PAD_CSI0_DAT4__KPP_COL_5			1092
-MX6Q_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC		1093
-MX6Q_PAD_CSI0_DAT4__GPIO_5_22			1094
-MX6Q_PAD_CSI0_DAT4__MMDC_DEBUG_43		1095
-MX6Q_PAD_CSI0_DAT4__CHEETAH_TRACE_1		1096
-MX6Q_PAD_CSI0_DAT5__IPU1_CSI0_D_5		1097
-MX6Q_PAD_CSI0_DAT5__WEIM_WEIM_D_3		1098
-MX6Q_PAD_CSI0_DAT5__ECSPI1_MOSI			1099
-MX6Q_PAD_CSI0_DAT5__KPP_ROW_5			1100
-MX6Q_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD		1101
-MX6Q_PAD_CSI0_DAT5__GPIO_5_23			1102
-MX6Q_PAD_CSI0_DAT5__MMDC_MMDC_DEBUG_44		1103
-MX6Q_PAD_CSI0_DAT5__CHEETAH_TRACE_2		1104
-MX6Q_PAD_CSI0_DAT6__IPU1_CSI0_D_6		1105
-MX6Q_PAD_CSI0_DAT6__WEIM_WEIM_D_4		1106
-MX6Q_PAD_CSI0_DAT6__ECSPI1_MISO			1107
-MX6Q_PAD_CSI0_DAT6__KPP_COL_6			1108
-MX6Q_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS		1109
-MX6Q_PAD_CSI0_DAT6__GPIO_5_24			1110
-MX6Q_PAD_CSI0_DAT6__MMDC_MMDC_DEBUG_45		1111
-MX6Q_PAD_CSI0_DAT6__CHEETAH_TRACE_3		1112
-MX6Q_PAD_CSI0_DAT7__IPU1_CSI0_D_7		1113
-MX6Q_PAD_CSI0_DAT7__WEIM_WEIM_D_5		1114
-MX6Q_PAD_CSI0_DAT7__ECSPI1_SS0			1115
-MX6Q_PAD_CSI0_DAT7__KPP_ROW_6			1116
-MX6Q_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD		1117
-MX6Q_PAD_CSI0_DAT7__GPIO_5_25			1118
-MX6Q_PAD_CSI0_DAT7__MMDC_MMDC_DEBUG_46		1119
-MX6Q_PAD_CSI0_DAT7__CHEETAH_TRACE_4		1120
-MX6Q_PAD_CSI0_DAT8__IPU1_CSI0_D_8		1121
-MX6Q_PAD_CSI0_DAT8__WEIM_WEIM_D_6		1122
-MX6Q_PAD_CSI0_DAT8__ECSPI2_SCLK			1123
-MX6Q_PAD_CSI0_DAT8__KPP_COL_7			1124
-MX6Q_PAD_CSI0_DAT8__I2C1_SDA			1125
-MX6Q_PAD_CSI0_DAT8__GPIO_5_26			1126
-MX6Q_PAD_CSI0_DAT8__MMDC_MMDC_DEBUG_47		1127
-MX6Q_PAD_CSI0_DAT8__CHEETAH_TRACE_5		1128
-MX6Q_PAD_CSI0_DAT9__IPU1_CSI0_D_9		1129
-MX6Q_PAD_CSI0_DAT9__WEIM_WEIM_D_7		1130
-MX6Q_PAD_CSI0_DAT9__ECSPI2_MOSI			1131
-MX6Q_PAD_CSI0_DAT9__KPP_ROW_7			1132
-MX6Q_PAD_CSI0_DAT9__I2C1_SCL			1133
-MX6Q_PAD_CSI0_DAT9__GPIO_5_27			1134
-MX6Q_PAD_CSI0_DAT9__MMDC_MMDC_DEBUG_48		1135
-MX6Q_PAD_CSI0_DAT9__CHEETAH_TRACE_6		1136
-MX6Q_PAD_CSI0_DAT10__IPU1_CSI0_D_10		1137
-MX6Q_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC		1138
-MX6Q_PAD_CSI0_DAT10__ECSPI2_MISO		1139
-MX6Q_PAD_CSI0_DAT10__UART1_TXD			1140
-MX6Q_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4		1141
-MX6Q_PAD_CSI0_DAT10__GPIO_5_28			1142
-MX6Q_PAD_CSI0_DAT10__MMDC_MMDC_DEBUG_33		1143
-MX6Q_PAD_CSI0_DAT10__CHEETAH_TRACE_7		1144
-MX6Q_PAD_CSI0_DAT11__IPU1_CSI0_D_11		1145
-MX6Q_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS		1146
-MX6Q_PAD_CSI0_DAT11__ECSPI2_SS0			1147
-MX6Q_PAD_CSI0_DAT11__UART1_RXD			1148
-MX6Q_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5		1149
-MX6Q_PAD_CSI0_DAT11__GPIO_5_29			1150
-MX6Q_PAD_CSI0_DAT11__MMDC_MMDC_DEBUG_34		1151
-MX6Q_PAD_CSI0_DAT11__CHEETAH_TRACE_8		1152
-MX6Q_PAD_CSI0_DAT12__IPU1_CSI0_D_12		1153
-MX6Q_PAD_CSI0_DAT12__WEIM_WEIM_D_8		1154
-MX6Q_PAD_CSI0_DAT12__PCIE_CTRL_MUX_16		1155
-MX6Q_PAD_CSI0_DAT12__UART4_TXD			1156
-MX6Q_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6		1157
-MX6Q_PAD_CSI0_DAT12__GPIO_5_30			1158
-MX6Q_PAD_CSI0_DAT12__MMDC_MMDC_DEBUG_35		1159
-MX6Q_PAD_CSI0_DAT12__CHEETAH_TRACE_9		1160
-MX6Q_PAD_CSI0_DAT13__IPU1_CSI0_D_13		1161
-MX6Q_PAD_CSI0_DAT13__WEIM_WEIM_D_9		1162
-MX6Q_PAD_CSI0_DAT13__PCIE_CTRL_MUX_17		1163
-MX6Q_PAD_CSI0_DAT13__UART4_RXD			1164
-MX6Q_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7		1165
-MX6Q_PAD_CSI0_DAT13__GPIO_5_31			1166
-MX6Q_PAD_CSI0_DAT13__MMDC_MMDC_DEBUG_36		1167
-MX6Q_PAD_CSI0_DAT13__CHEETAH_TRACE_10		1168
-MX6Q_PAD_CSI0_DAT14__IPU1_CSI0_D_14		1169
-MX6Q_PAD_CSI0_DAT14__WEIM_WEIM_D_10		1170
-MX6Q_PAD_CSI0_DAT14__PCIE_CTRL_MUX_18		1171
-MX6Q_PAD_CSI0_DAT14__UART5_TXD			1172
-MX6Q_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8		1173
-MX6Q_PAD_CSI0_DAT14__GPIO_6_0			1174
-MX6Q_PAD_CSI0_DAT14__MMDC_MMDC_DEBUG_37		1175
-MX6Q_PAD_CSI0_DAT14__CHEETAH_TRACE_11		1176
-MX6Q_PAD_CSI0_DAT15__IPU1_CSI0_D_15		1177
-MX6Q_PAD_CSI0_DAT15__WEIM_WEIM_D_11		1178
-MX6Q_PAD_CSI0_DAT15__PCIE_CTRL_MUX_19		1179
-MX6Q_PAD_CSI0_DAT15__UART5_RXD			1180
-MX6Q_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9		1181
-MX6Q_PAD_CSI0_DAT15__GPIO_6_1			1182
-MX6Q_PAD_CSI0_DAT15__MMDC_MMDC_DEBUG_38		1183
-MX6Q_PAD_CSI0_DAT15__CHEETAH_TRACE_12		1184
-MX6Q_PAD_CSI0_DAT16__IPU1_CSI0_D_16		1185
-MX6Q_PAD_CSI0_DAT16__WEIM_WEIM_D_12		1186
-MX6Q_PAD_CSI0_DAT16__PCIE_CTRL_MUX_20		1187
-MX6Q_PAD_CSI0_DAT16__UART4_RTS			1188
-MX6Q_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10		1189
-MX6Q_PAD_CSI0_DAT16__GPIO_6_2			1190
-MX6Q_PAD_CSI0_DAT16__MMDC_MMDC_DEBUG_39		1191
-MX6Q_PAD_CSI0_DAT16__CHEETAH_TRACE_13		1192
-MX6Q_PAD_CSI0_DAT17__IPU1_CSI0_D_17		1193
-MX6Q_PAD_CSI0_DAT17__WEIM_WEIM_D_13		1194
-MX6Q_PAD_CSI0_DAT17__PCIE_CTRL_MUX_21		1195
-MX6Q_PAD_CSI0_DAT17__UART4_CTS			1196
-MX6Q_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11		1197
-MX6Q_PAD_CSI0_DAT17__GPIO_6_3			1198
-MX6Q_PAD_CSI0_DAT17__MMDC_MMDC_DEBUG_40		1199
-MX6Q_PAD_CSI0_DAT17__CHEETAH_TRACE_14		1200
-MX6Q_PAD_CSI0_DAT18__IPU1_CSI0_D_18		1201
-MX6Q_PAD_CSI0_DAT18__WEIM_WEIM_D_14		1202
-MX6Q_PAD_CSI0_DAT18__PCIE_CTRL_MUX_22		1203
-MX6Q_PAD_CSI0_DAT18__UART5_RTS			1204
-MX6Q_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12		1205
-MX6Q_PAD_CSI0_DAT18__GPIO_6_4			1206
-MX6Q_PAD_CSI0_DAT18__MMDC_MMDC_DEBUG_41		1207
-MX6Q_PAD_CSI0_DAT18__CHEETAH_TRACE_15		1208
-MX6Q_PAD_CSI0_DAT19__IPU1_CSI0_D_19		1209
-MX6Q_PAD_CSI0_DAT19__WEIM_WEIM_D_15		1210
-MX6Q_PAD_CSI0_DAT19__PCIE_CTRL_MUX_23		1211
-MX6Q_PAD_CSI0_DAT19__UART5_CTS			1212
-MX6Q_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13		1213
-MX6Q_PAD_CSI0_DAT19__GPIO_6_5			1214
-MX6Q_PAD_CSI0_DAT19__MMDC_MMDC_DEBUG_42		1215
-MX6Q_PAD_CSI0_DAT19__ANATOP_TESTO_9		1216
-MX6Q_PAD_JTAG_TMS__SJC_TMS			1217
-MX6Q_PAD_JTAG_MOD__SJC_MOD			1218
-MX6Q_PAD_JTAG_TRSTB__SJC_TRSTB			1219
-MX6Q_PAD_JTAG_TDI__SJC_TDI			1220
-MX6Q_PAD_JTAG_TCK__SJC_TCK			1221
-MX6Q_PAD_JTAG_TDO__SJC_TDO			1222
-MX6Q_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3		1223
-MX6Q_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2		1224
-MX6Q_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK		1225
-MX6Q_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1		1226
-MX6Q_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0		1227
-MX6Q_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3		1228
-MX6Q_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK		1229
-MX6Q_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2		1230
-MX6Q_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1		1231
-MX6Q_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0		1232
-MX6Q_PAD_TAMPER__SNVS_LP_WRAP_SNVS_TD1		1233
-MX6Q_PAD_PMIC_ON_REQ__SNVS_LPWRAP_WKALM		1234
-MX6Q_PAD_PMIC_STBY_REQ__CCM_PMIC_STBYRQ		1235
-MX6Q_PAD_POR_B__SRC_POR_B			1236
-MX6Q_PAD_BOOT_MODE1__SRC_BOOT_MODE_1		1237
-MX6Q_PAD_RESET_IN_B__SRC_RESET_B		1238
-MX6Q_PAD_BOOT_MODE0__SRC_BOOT_MODE_0		1239
-MX6Q_PAD_TEST_MODE__TCU_TEST_MODE		1240
-MX6Q_PAD_SD3_DAT7__USDHC3_DAT7			1241
-MX6Q_PAD_SD3_DAT7__UART1_TXD			1242
-MX6Q_PAD_SD3_DAT7__PCIE_CTRL_MUX_24		1243
-MX6Q_PAD_SD3_DAT7__USBOH3_UH3_DFD_OUT_0		1244
-MX6Q_PAD_SD3_DAT7__USBOH3_UH2_DFD_OUT_0		1245
-MX6Q_PAD_SD3_DAT7__GPIO_6_17			1246
-MX6Q_PAD_SD3_DAT7__MIPI_CORE_DPHY_IN_12		1247
-MX6Q_PAD_SD3_DAT7__USBPHY2_CLK20DIV		1248
-MX6Q_PAD_SD3_DAT6__USDHC3_DAT6			1249
-MX6Q_PAD_SD3_DAT6__UART1_RXD			1250
-MX6Q_PAD_SD3_DAT6__PCIE_CTRL_MUX_25		1251
-MX6Q_PAD_SD3_DAT6__USBOH3_UH3_DFD_OUT_1		1252
-MX6Q_PAD_SD3_DAT6__USBOH3_UH2_DFD_OUT_1		1253
-MX6Q_PAD_SD3_DAT6__GPIO_6_18			1254
-MX6Q_PAD_SD3_DAT6__MIPI_CORE_DPHY_IN_13		1255
-MX6Q_PAD_SD3_DAT6__ANATOP_TESTO_10		1256
-MX6Q_PAD_SD3_DAT5__USDHC3_DAT5			1257
-MX6Q_PAD_SD3_DAT5__UART2_TXD			1258
-MX6Q_PAD_SD3_DAT5__PCIE_CTRL_MUX_26		1259
-MX6Q_PAD_SD3_DAT5__USBOH3_UH3_DFD_OUT_2		1260
-MX6Q_PAD_SD3_DAT5__USBOH3_UH2_DFD_OUT_2		1261
-MX6Q_PAD_SD3_DAT5__GPIO_7_0			1262
-MX6Q_PAD_SD3_DAT5__MIPI_CORE_DPHY_IN_14		1263
-MX6Q_PAD_SD3_DAT5__ANATOP_TESTO_11		1264
-MX6Q_PAD_SD3_DAT4__USDHC3_DAT4			1265
-MX6Q_PAD_SD3_DAT4__UART2_RXD			1266
-MX6Q_PAD_SD3_DAT4__PCIE_CTRL_MUX_27		1267
-MX6Q_PAD_SD3_DAT4__USBOH3_UH3_DFD_OUT_3		1268
-MX6Q_PAD_SD3_DAT4__USBOH3_UH2_DFD_OUT_3		1269
-MX6Q_PAD_SD3_DAT4__GPIO_7_1			1270
-MX6Q_PAD_SD3_DAT4__MIPI_CORE_DPHY_IN_15		1271
-MX6Q_PAD_SD3_DAT4__ANATOP_TESTO_12		1272
-MX6Q_PAD_SD3_CMD__USDHC3_CMD			1273
-MX6Q_PAD_SD3_CMD__UART2_CTS			1274
-MX6Q_PAD_SD3_CMD__CAN1_TXCAN			1275
-MX6Q_PAD_SD3_CMD__USBOH3_UH3_DFD_OUT_4		1276
-MX6Q_PAD_SD3_CMD__USBOH3_UH2_DFD_OUT_4		1277
-MX6Q_PAD_SD3_CMD__GPIO_7_2			1278
-MX6Q_PAD_SD3_CMD__MIPI_CORE_DPHY_IN_16		1279
-MX6Q_PAD_SD3_CMD__ANATOP_TESTO_13		1280
-MX6Q_PAD_SD3_CLK__USDHC3_CLK			1281
-MX6Q_PAD_SD3_CLK__UART2_RTS			1282
-MX6Q_PAD_SD3_CLK__CAN1_RXCAN			1283
-MX6Q_PAD_SD3_CLK__USBOH3_UH3_DFD_OUT_5		1284
-MX6Q_PAD_SD3_CLK__USBOH3_UH2_DFD_OUT_5		1285
-MX6Q_PAD_SD3_CLK__GPIO_7_3			1286
-MX6Q_PAD_SD3_CLK__MIPI_CORE_DPHY_IN_17		1287
-MX6Q_PAD_SD3_CLK__ANATOP_TESTO_14		1288
-MX6Q_PAD_SD3_DAT0__USDHC3_DAT0			1289
-MX6Q_PAD_SD3_DAT0__UART1_CTS			1290
-MX6Q_PAD_SD3_DAT0__CAN2_TXCAN			1291
-MX6Q_PAD_SD3_DAT0__USBOH3_UH3_DFD_OUT_6		1292
-MX6Q_PAD_SD3_DAT0__USBOH3_UH2_DFD_OUT_6		1293
-MX6Q_PAD_SD3_DAT0__GPIO_7_4			1294
-MX6Q_PAD_SD3_DAT0__MIPI_CORE_DPHY_IN_18		1295
-MX6Q_PAD_SD3_DAT0__ANATOP_TESTO_15		1296
-MX6Q_PAD_SD3_DAT1__USDHC3_DAT1			1297
-MX6Q_PAD_SD3_DAT1__UART1_RTS			1298
-MX6Q_PAD_SD3_DAT1__CAN2_RXCAN			1299
-MX6Q_PAD_SD3_DAT1__USBOH3_UH3_DFD_OUT_7		1300
-MX6Q_PAD_SD3_DAT1__USBOH3_UH2_DFD_OUT_7		1301
-MX6Q_PAD_SD3_DAT1__GPIO_7_5			1302
-MX6Q_PAD_SD3_DAT1__MIPI_CORE_DPHY_IN_19		1303
-MX6Q_PAD_SD3_DAT1__ANATOP_TESTI_0		1304
-MX6Q_PAD_SD3_DAT2__USDHC3_DAT2			1305
-MX6Q_PAD_SD3_DAT2__PCIE_CTRL_MUX_28		1306
-MX6Q_PAD_SD3_DAT2__USBOH3_UH3_DFD_OUT_8		1307
-MX6Q_PAD_SD3_DAT2__USBOH3_UH2_DFD_OUT_8		1308
-MX6Q_PAD_SD3_DAT2__GPIO_7_6			1309
-MX6Q_PAD_SD3_DAT2__MIPI_CORE_DPHY_IN_20		1310
-MX6Q_PAD_SD3_DAT2__ANATOP_TESTI_1		1311
-MX6Q_PAD_SD3_DAT3__USDHC3_DAT3			1312
-MX6Q_PAD_SD3_DAT3__UART3_CTS			1313
-MX6Q_PAD_SD3_DAT3__PCIE_CTRL_MUX_29		1314
-MX6Q_PAD_SD3_DAT3__USBOH3_UH3_DFD_OUT_9		1315
-MX6Q_PAD_SD3_DAT3__USBOH3_UH2_DFD_OUT_9		1316
-MX6Q_PAD_SD3_DAT3__GPIO_7_7			1317
-MX6Q_PAD_SD3_DAT3__MIPI_CORE_DPHY_IN_21		1318
-MX6Q_PAD_SD3_DAT3__ANATOP_TESTI_2		1319
-MX6Q_PAD_SD3_RST__USDHC3_RST			1320
-MX6Q_PAD_SD3_RST__UART3_RTS			1321
-MX6Q_PAD_SD3_RST__PCIE_CTRL_MUX_30		1322
-MX6Q_PAD_SD3_RST__USBOH3_UH3_DFD_OUT_10		1323
-MX6Q_PAD_SD3_RST__USBOH3_UH2_DFD_OUT_10		1324
-MX6Q_PAD_SD3_RST__GPIO_7_8			1325
-MX6Q_PAD_SD3_RST__MIPI_CORE_DPHY_IN_22		1326
-MX6Q_PAD_SD3_RST__ANATOP_ANATOP_TESTI_3		1327
-MX6Q_PAD_NANDF_CLE__RAWNAND_CLE			1328
-MX6Q_PAD_NANDF_CLE__IPU2_SISG_4			1329
-MX6Q_PAD_NANDF_CLE__PCIE_CTRL_MUX_31		1330
-MX6Q_PAD_NANDF_CLE__USBOH3_UH3_DFD_OT11		1331
-MX6Q_PAD_NANDF_CLE__USBOH3_UH2_DFD_OT11		1332
-MX6Q_PAD_NANDF_CLE__GPIO_6_7			1333
-MX6Q_PAD_NANDF_CLE__MIPI_CORE_DPHY_IN23		1334
-MX6Q_PAD_NANDF_CLE__TPSMP_HTRANS_0		1335
-MX6Q_PAD_NANDF_ALE__RAWNAND_ALE			1336
-MX6Q_PAD_NANDF_ALE__USDHC4_RST			1337
-MX6Q_PAD_NANDF_ALE__PCIE_CTRL_MUX_0		1338
-MX6Q_PAD_NANDF_ALE__USBOH3_UH3_DFD_OT12		1339
-MX6Q_PAD_NANDF_ALE__USBOH3_UH2_DFD_OT12		1340
-MX6Q_PAD_NANDF_ALE__GPIO_6_8			1341
-MX6Q_PAD_NANDF_ALE__MIPI_CR_DPHY_IN_24		1342
-MX6Q_PAD_NANDF_ALE__TPSMP_HTRANS_1		1343
-MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN		1344
-MX6Q_PAD_NANDF_WP_B__IPU2_SISG_5		1345
-MX6Q_PAD_NANDF_WP_B__PCIE_CTRL__MUX_1		1346
-MX6Q_PAD_NANDF_WP_B__USBOH3_UH3_DFDOT13		1347
-MX6Q_PAD_NANDF_WP_B__USBOH3_UH2_DFDOT13		1348
-MX6Q_PAD_NANDF_WP_B__GPIO_6_9			1349
-MX6Q_PAD_NANDF_WP_B__MIPI_CR_DPHY_OUT32		1350
-MX6Q_PAD_NANDF_WP_B__PL301_PER1_HSIZE_0		1351
-MX6Q_PAD_NANDF_RB0__RAWNAND_READY0		1352
-MX6Q_PAD_NANDF_RB0__IPU2_DI0_PIN1		1353
-MX6Q_PAD_NANDF_RB0__PCIE_CTRL_MUX_2		1354
-MX6Q_PAD_NANDF_RB0__USBOH3_UH3_DFD_OT14		1355
-MX6Q_PAD_NANDF_RB0__USBOH3_UH2_DFD_OT14		1356
-MX6Q_PAD_NANDF_RB0__GPIO_6_10			1357
-MX6Q_PAD_NANDF_RB0__MIPI_CR_DPHY_OUT_33		1358
-MX6Q_PAD_NANDF_RB0__PL301_PER1_HSIZE_1		1359
-MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N		1360
-MX6Q_PAD_NANDF_CS0__USBOH3_UH3_DFD_OT15		1361
-MX6Q_PAD_NANDF_CS0__USBOH3_UH2_DFD_OT15		1362
-MX6Q_PAD_NANDF_CS0__GPIO_6_11			1363
-MX6Q_PAD_NANDF_CS0__PL301_PER1_HSIZE_2		1364
-MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N		1365
-MX6Q_PAD_NANDF_CS1__USDHC4_VSELECT		1366
-MX6Q_PAD_NANDF_CS1__USDHC3_VSELECT		1367
-MX6Q_PAD_NANDF_CS1__PCIE_CTRL_MUX_3		1368
-MX6Q_PAD_NANDF_CS1__GPIO_6_14			1369
-MX6Q_PAD_NANDF_CS1__PL301_PER1_HRDYOUT		1370
-MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N		1371
-MX6Q_PAD_NANDF_CS2__IPU1_SISG_0			1372
-MX6Q_PAD_NANDF_CS2__ESAI1_TX0			1373
-MX6Q_PAD_NANDF_CS2__WEIM_WEIM_CRE		1374
-MX6Q_PAD_NANDF_CS2__CCM_CLKO2			1375
-MX6Q_PAD_NANDF_CS2__GPIO_6_15			1376
-MX6Q_PAD_NANDF_CS2__IPU2_SISG_0			1377
-MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N		1378
-MX6Q_PAD_NANDF_CS3__IPU1_SISG_1			1379
-MX6Q_PAD_NANDF_CS3__ESAI1_TX1			1380
-MX6Q_PAD_NANDF_CS3__WEIM_WEIM_A_26		1381
-MX6Q_PAD_NANDF_CS3__PCIE_CTRL_MUX_4		1382
-MX6Q_PAD_NANDF_CS3__GPIO_6_16			1383
-MX6Q_PAD_NANDF_CS3__IPU2_SISG_1			1384
-MX6Q_PAD_NANDF_CS3__TPSMP_CLK			1385
-MX6Q_PAD_SD4_CMD__USDHC4_CMD			1386
-MX6Q_PAD_SD4_CMD__RAWNAND_RDN			1387
-MX6Q_PAD_SD4_CMD__UART3_TXD			1388
-MX6Q_PAD_SD4_CMD__PCIE_CTRL_MUX_5		1389
-MX6Q_PAD_SD4_CMD__GPIO_7_9			1390
-MX6Q_PAD_SD4_CMD__TPSMP_HDATA_DIR		1391
-MX6Q_PAD_SD4_CLK__USDHC4_CLK			1392
-MX6Q_PAD_SD4_CLK__RAWNAND_WRN			1393
-MX6Q_PAD_SD4_CLK__UART3_RXD			1394
-MX6Q_PAD_SD4_CLK__PCIE_CTRL_MUX_6		1395
-MX6Q_PAD_SD4_CLK__GPIO_7_10			1396
-MX6Q_PAD_NANDF_D0__RAWNAND_D0			1397
-MX6Q_PAD_NANDF_D0__USDHC1_DAT4			1398
-MX6Q_PAD_NANDF_D0__GPU3D_GPU_DBG_OUT_0		1399
-MX6Q_PAD_NANDF_D0__USBOH3_UH2_DFD_OUT16		1400
-MX6Q_PAD_NANDF_D0__USBOH3_UH3_DFD_OUT16		1401
-MX6Q_PAD_NANDF_D0__GPIO_2_0			1402
-MX6Q_PAD_NANDF_D0__IPU1_IPU_DIAG_BUS_0		1403
-MX6Q_PAD_NANDF_D0__IPU2_IPU_DIAG_BUS_0		1404
-MX6Q_PAD_NANDF_D1__RAWNAND_D1			1405
-MX6Q_PAD_NANDF_D1__USDHC1_DAT5			1406
-MX6Q_PAD_NANDF_D1__GPU3D_GPU_DEBUG_OUT1		1407
-MX6Q_PAD_NANDF_D1__USBOH3_UH2_DFD_OUT17		1408
-MX6Q_PAD_NANDF_D1__USBOH3_UH3_DFD_OUT17		1409
-MX6Q_PAD_NANDF_D1__GPIO_2_1			1410
-MX6Q_PAD_NANDF_D1__IPU1_IPU_DIAG_BUS_1		1411
-MX6Q_PAD_NANDF_D1__IPU2_IPU_DIAG_BUS_1		1412
-MX6Q_PAD_NANDF_D2__RAWNAND_D2			1413
-MX6Q_PAD_NANDF_D2__USDHC1_DAT6			1414
-MX6Q_PAD_NANDF_D2__GPU3D_GPU_DBG_OUT_2		1415
-MX6Q_PAD_NANDF_D2__USBOH3_UH2_DFD_OUT18		1416
-MX6Q_PAD_NANDF_D2__USBOH3_UH3_DFD_OUT18		1417
-MX6Q_PAD_NANDF_D2__GPIO_2_2			1418
-MX6Q_PAD_NANDF_D2__IPU1_IPU_DIAG_BUS_2		1419
-MX6Q_PAD_NANDF_D2__IPU2_IPU_DIAG_BUS_2		1420
-MX6Q_PAD_NANDF_D3__RAWNAND_D3			1421
-MX6Q_PAD_NANDF_D3__USDHC1_DAT7			1422
-MX6Q_PAD_NANDF_D3__GPU3D_GPU_DBG_OUT_3		1423
-MX6Q_PAD_NANDF_D3__USBOH3_UH2_DFD_OUT19		1424
-MX6Q_PAD_NANDF_D3__USBOH3_UH3_DFD_OUT19		1425
-MX6Q_PAD_NANDF_D3__GPIO_2_3			1426
-MX6Q_PAD_NANDF_D3__IPU1_IPU_DIAG_BUS_3		1427
-MX6Q_PAD_NANDF_D3__IPU2_IPU_DIAG_BUS_3		1428
-MX6Q_PAD_NANDF_D4__RAWNAND_D4			1429
-MX6Q_PAD_NANDF_D4__USDHC2_DAT4			1430
-MX6Q_PAD_NANDF_D4__GPU3D_GPU_DBG_OUT_4		1431
-MX6Q_PAD_NANDF_D4__USBOH3_UH2_DFD_OUT20		1432
-MX6Q_PAD_NANDF_D4__USBOH3_UH3_DFD_OUT20		1433
-MX6Q_PAD_NANDF_D4__GPIO_2_4			1434
-MX6Q_PAD_NANDF_D4__IPU1_IPU_DIAG_BUS_4		1435
-MX6Q_PAD_NANDF_D4__IPU2_IPU_DIAG_BUS_4		1436
-MX6Q_PAD_NANDF_D5__RAWNAND_D5			1437
-MX6Q_PAD_NANDF_D5__USDHC2_DAT5			1438
-MX6Q_PAD_NANDF_D5__GPU3D_GPU_DBG_OUT_5		1439
-MX6Q_PAD_NANDF_D5__USBOH3_UH2_DFD_OUT21		1440
-MX6Q_PAD_NANDF_D5__USBOH3_UH3_DFD_OUT21		1441
-MX6Q_PAD_NANDF_D5__GPIO_2_5			1442
-MX6Q_PAD_NANDF_D5__IPU1_IPU_DIAG_BUS_5		1443
-MX6Q_PAD_NANDF_D5__IPU2_IPU_DIAG_BUS_5		1444
-MX6Q_PAD_NANDF_D6__RAWNAND_D6			1445
-MX6Q_PAD_NANDF_D6__USDHC2_DAT6			1446
-MX6Q_PAD_NANDF_D6__GPU3D_GPU_DBG_OUT_6		1447
-MX6Q_PAD_NANDF_D6__USBOH3_UH2_DFD_OUT22		1448
-MX6Q_PAD_NANDF_D6__USBOH3_UH3_DFD_OUT22		1449
-MX6Q_PAD_NANDF_D6__GPIO_2_6			1450
-MX6Q_PAD_NANDF_D6__IPU1_IPU_DIAG_BUS_6		1451
-MX6Q_PAD_NANDF_D6__IPU2_IPU_DIAG_BUS_6		1452
-MX6Q_PAD_NANDF_D7__RAWNAND_D7			1453
-MX6Q_PAD_NANDF_D7__USDHC2_DAT7			1454
-MX6Q_PAD_NANDF_D7__GPU3D_GPU_DBG_OUT_7		1455
-MX6Q_PAD_NANDF_D7__USBOH3_UH2_DFD_OUT23		1456
-MX6Q_PAD_NANDF_D7__USBOH3_UH3_DFD_OUT23		1457
-MX6Q_PAD_NANDF_D7__GPIO_2_7			1458
-MX6Q_PAD_NANDF_D7__IPU1_IPU_DIAG_BUS_7		1459
-MX6Q_PAD_NANDF_D7__IPU2_IPU_DIAG_BUS_7		1460
-MX6Q_PAD_SD4_DAT0__RAWNAND_D8			1461
-MX6Q_PAD_SD4_DAT0__USDHC4_DAT0			1462
-MX6Q_PAD_SD4_DAT0__RAWNAND_DQS			1463
-MX6Q_PAD_SD4_DAT0__USBOH3_UH2_DFD_OUT24		1464
-MX6Q_PAD_SD4_DAT0__USBOH3_UH3_DFD_OUT24		1465
-MX6Q_PAD_SD4_DAT0__GPIO_2_8			1466
-MX6Q_PAD_SD4_DAT0__IPU1_IPU_DIAG_BUS_8		1467
-MX6Q_PAD_SD4_DAT0__IPU2_IPU_DIAG_BUS_8		1468
-MX6Q_PAD_SD4_DAT1__RAWNAND_D9			1469
-MX6Q_PAD_SD4_DAT1__USDHC4_DAT1			1470
-MX6Q_PAD_SD4_DAT1__PWM3_PWMO			1471
-MX6Q_PAD_SD4_DAT1__USBOH3_UH2_DFD_OUT25		1472
-MX6Q_PAD_SD4_DAT1__USBOH3_UH3_DFD_OUT25		1473
-MX6Q_PAD_SD4_DAT1__GPIO_2_9			1474
-MX6Q_PAD_SD4_DAT1__IPU1_IPU_DIAG_BUS_9		1475
-MX6Q_PAD_SD4_DAT1__IPU2_IPU_DIAG_BUS_9		1476
-MX6Q_PAD_SD4_DAT2__RAWNAND_D10			1477
-MX6Q_PAD_SD4_DAT2__USDHC4_DAT2			1478
-MX6Q_PAD_SD4_DAT2__PWM4_PWMO			1479
-MX6Q_PAD_SD4_DAT2__USBOH3_UH2_DFD_OUT26		1480
-MX6Q_PAD_SD4_DAT2__USBOH3_UH3_DFD_OUT26		1481
-MX6Q_PAD_SD4_DAT2__GPIO_2_10			1482
-MX6Q_PAD_SD4_DAT2__IPU1_IPU_DIAG_BUS_10		1483
-MX6Q_PAD_SD4_DAT2__IPU2_IPU_DIAG_BUS_10		1484
-MX6Q_PAD_SD4_DAT3__RAWNAND_D11			1485
-MX6Q_PAD_SD4_DAT3__USDHC4_DAT3			1486
-MX6Q_PAD_SD4_DAT3__USBOH3_UH2_DFD_OUT27		1487
-MX6Q_PAD_SD4_DAT3__USBOH3_UH3_DFD_OUT27		1488
-MX6Q_PAD_SD4_DAT3__GPIO_2_11			1489
-MX6Q_PAD_SD4_DAT3__IPU1_IPU_DIAG_BUS_11		1490
-MX6Q_PAD_SD4_DAT3__IPU2_IPU_DIAG_BUS_11		1491
-MX6Q_PAD_SD4_DAT4__RAWNAND_D12			1492
-MX6Q_PAD_SD4_DAT4__USDHC4_DAT4			1493
-MX6Q_PAD_SD4_DAT4__UART2_RXD			1494
-MX6Q_PAD_SD4_DAT4__USBOH3_UH2_DFD_OUT28		1495
-MX6Q_PAD_SD4_DAT4__USBOH3_UH3_DFD_OUT28		1496
-MX6Q_PAD_SD4_DAT4__GPIO_2_12			1497
-MX6Q_PAD_SD4_DAT4__IPU1_IPU_DIAG_BUS_12		1498
-MX6Q_PAD_SD4_DAT4__IPU2_IPU_DIAG_BUS_12		1499
-MX6Q_PAD_SD4_DAT5__RAWNAND_D13			1500
-MX6Q_PAD_SD4_DAT5__USDHC4_DAT5			1501
-MX6Q_PAD_SD4_DAT5__UART2_RTS			1502
-MX6Q_PAD_SD4_DAT5__USBOH3_UH2_DFD_OUT29		1503
-MX6Q_PAD_SD4_DAT5__USBOH3_UH3_DFD_OUT29		1504
-MX6Q_PAD_SD4_DAT5__GPIO_2_13			1505
-MX6Q_PAD_SD4_DAT5__IPU1_IPU_DIAG_BUS_13		1506
-MX6Q_PAD_SD4_DAT5__IPU2_IPU_DIAG_BUS_13		1507
-MX6Q_PAD_SD4_DAT6__RAWNAND_D14			1508
-MX6Q_PAD_SD4_DAT6__USDHC4_DAT6			1509
-MX6Q_PAD_SD4_DAT6__UART2_CTS			1510
-MX6Q_PAD_SD4_DAT6__USBOH3_UH2_DFD_OUT30		1511
-MX6Q_PAD_SD4_DAT6__USBOH3_UH3_DFD_OUT30		1512
-MX6Q_PAD_SD4_DAT6__GPIO_2_14			1513
-MX6Q_PAD_SD4_DAT6__IPU1_IPU_DIAG_BUS_14		1514
-MX6Q_PAD_SD4_DAT6__IPU2_IPU_DIAG_BUS_14		1515
-MX6Q_PAD_SD4_DAT7__RAWNAND_D15			1516
-MX6Q_PAD_SD4_DAT7__USDHC4_DAT7			1517
-MX6Q_PAD_SD4_DAT7__UART2_TXD			1518
-MX6Q_PAD_SD4_DAT7__USBOH3_UH2_DFD_OUT31		1519
-MX6Q_PAD_SD4_DAT7__USBOH3_UH3_DFD_OUT31		1520
-MX6Q_PAD_SD4_DAT7__GPIO_2_15			1521
-MX6Q_PAD_SD4_DAT7__IPU1_IPU_DIAG_BUS_15		1522
-MX6Q_PAD_SD4_DAT7__IPU2_IPU_DIAG_BUS_15		1523
-MX6Q_PAD_SD1_DAT1__USDHC1_DAT1			1524
-MX6Q_PAD_SD1_DAT1__ECSPI5_SS0			1525
-MX6Q_PAD_SD1_DAT1__PWM3_PWMO			1526
-MX6Q_PAD_SD1_DAT1__GPT_CAPIN2			1527
-MX6Q_PAD_SD1_DAT1__PCIE_CTRL_MUX_7		1528
-MX6Q_PAD_SD1_DAT1__GPIO_1_17			1529
-MX6Q_PAD_SD1_DAT1__HDMI_TX_OPHYDTB_0		1530
-MX6Q_PAD_SD1_DAT1__ANATOP_TESTO_8		1531
-MX6Q_PAD_SD1_DAT0__USDHC1_DAT0			1532
-MX6Q_PAD_SD1_DAT0__ECSPI5_MISO			1533
-MX6Q_PAD_SD1_DAT0__CAAM_WRAP_RNG_OSCOBS		1534
-MX6Q_PAD_SD1_DAT0__GPT_CAPIN1			1535
-MX6Q_PAD_SD1_DAT0__PCIE_CTRL_MUX_8		1536
-MX6Q_PAD_SD1_DAT0__GPIO_1_16			1537
-MX6Q_PAD_SD1_DAT0__HDMI_TX_OPHYDTB_1		1538
-MX6Q_PAD_SD1_DAT0__ANATOP_TESTO_7		1539
-MX6Q_PAD_SD1_DAT3__USDHC1_DAT3			1540
-MX6Q_PAD_SD1_DAT3__ECSPI5_SS2			1541
-MX6Q_PAD_SD1_DAT3__GPT_CMPOUT3			1542
-MX6Q_PAD_SD1_DAT3__PWM1_PWMO			1543
-MX6Q_PAD_SD1_DAT3__WDOG2_WDOG_B			1544
-MX6Q_PAD_SD1_DAT3__GPIO_1_21			1545
-MX6Q_PAD_SD1_DAT3__WDOG2_WDOG_RST_B_DEB		1546
-MX6Q_PAD_SD1_DAT3__ANATOP_TESTO_6		1547
-MX6Q_PAD_SD1_CMD__USDHC1_CMD			1548
-MX6Q_PAD_SD1_CMD__ECSPI5_MOSI			1549
-MX6Q_PAD_SD1_CMD__PWM4_PWMO			1550
-MX6Q_PAD_SD1_CMD__GPT_CMPOUT1			1551
-MX6Q_PAD_SD1_CMD__GPIO_1_18			1552
-MX6Q_PAD_SD1_CMD__ANATOP_TESTO_5		1553
-MX6Q_PAD_SD1_DAT2__USDHC1_DAT2			1554
-MX6Q_PAD_SD1_DAT2__ECSPI5_SS1			1555
-MX6Q_PAD_SD1_DAT2__GPT_CMPOUT2			1556
-MX6Q_PAD_SD1_DAT2__PWM2_PWMO			1557
-MX6Q_PAD_SD1_DAT2__WDOG1_WDOG_B			1558
-MX6Q_PAD_SD1_DAT2__GPIO_1_19			1559
-MX6Q_PAD_SD1_DAT2__WDOG1_WDOG_RST_B_DEB		1560
-MX6Q_PAD_SD1_DAT2__ANATOP_TESTO_4		1561
-MX6Q_PAD_SD1_CLK__USDHC1_CLK			1562
-MX6Q_PAD_SD1_CLK__ECSPI5_SCLK			1563
-MX6Q_PAD_SD1_CLK__OSC32K_32K_OUT		1564
-MX6Q_PAD_SD1_CLK__GPT_CLKIN			1565
-MX6Q_PAD_SD1_CLK__GPIO_1_20			1566
-MX6Q_PAD_SD1_CLK__PHY_DTB_0			1567
-MX6Q_PAD_SD1_CLK__SATA_PHY_DTB_0		1568
-MX6Q_PAD_SD2_CLK__USDHC2_CLK			1569
-MX6Q_PAD_SD2_CLK__ECSPI5_SCLK			1570
-MX6Q_PAD_SD2_CLK__KPP_COL_5			1571
-MX6Q_PAD_SD2_CLK__AUDMUX_AUD4_RXFS		1572
-MX6Q_PAD_SD2_CLK__PCIE_CTRL_MUX_9		1573
-MX6Q_PAD_SD2_CLK__GPIO_1_10			1574
-MX6Q_PAD_SD2_CLK__PHY_DTB_1			1575
-MX6Q_PAD_SD2_CLK__SATA_PHY_DTB_1		1576
-MX6Q_PAD_SD2_CMD__USDHC2_CMD			1577
-MX6Q_PAD_SD2_CMD__ECSPI5_MOSI			1578
-MX6Q_PAD_SD2_CMD__KPP_ROW_5			1579
-MX6Q_PAD_SD2_CMD__AUDMUX_AUD4_RXC		1580
-MX6Q_PAD_SD2_CMD__PCIE_CTRL_MUX_10		1581
-MX6Q_PAD_SD2_CMD__GPIO_1_11			1582
-MX6Q_PAD_SD2_DAT3__USDHC2_DAT3			1583
-MX6Q_PAD_SD2_DAT3__ECSPI5_SS3			1584
-MX6Q_PAD_SD2_DAT3__KPP_COL_6			1585
-MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC		1586
-MX6Q_PAD_SD2_DAT3__PCIE_CTRL_MUX_11		1587
-MX6Q_PAD_SD2_DAT3__GPIO_1_12			1588
-MX6Q_PAD_SD2_DAT3__SJC_DONE			1589
-MX6Q_PAD_SD2_DAT3__ANATOP_TESTO_3		1590
-MX6Q_PAD_ENET_RX_ER__ANATOP_USBOTG_ID		1591
-MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID		1592
+Refer to imx6q-pinfunc.h in device tree source folder for all available
+imx6q PIN_FUNC_ID.

Documentation/devicetree/bindings/pinctrl/fsl,imx6sl-pinctrl.txt

@@ -0,0 +1,39 @@
+* Freescale IMX6 SoloLite IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx6sl-iomuxc"
+- fsl,pins: two integers array, represents a group of pins mux and config
+  setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
+  pin working on a specific function, CONFIG is the pad setting value like
+  pull-up for this pin. Please refer to imx6sl datasheet for the valid pad
+  config settings.
+
+CONFIG bits definition:
+PAD_CTL_LVE                     (1 << 22)
+PAD_CTL_HYS                     (1 << 16)
+PAD_CTL_PUS_100K_DOWN           (0 << 14)
+PAD_CTL_PUS_47K_UP              (1 << 14)
+PAD_CTL_PUS_100K_UP             (2 << 14)
+PAD_CTL_PUS_22K_UP              (3 << 14)
+PAD_CTL_PUE                     (1 << 13)
+PAD_CTL_PKE                     (1 << 12)
+PAD_CTL_ODE                     (1 << 11)
+PAD_CTL_SPEED_LOW               (1 << 6)
+PAD_CTL_SPEED_MED               (2 << 6)
+PAD_CTL_SPEED_HIGH              (3 << 6)
+PAD_CTL_DSE_DISABLE             (0 << 3)
+PAD_CTL_DSE_240ohm              (1 << 3)
+PAD_CTL_DSE_120ohm              (2 << 3)
+PAD_CTL_DSE_80ohm               (3 << 3)
+PAD_CTL_DSE_60ohm               (4 << 3)
+PAD_CTL_DSE_48ohm               (5 << 3)
+PAD_CTL_DSE_40ohm               (6 << 3)
+PAD_CTL_DSE_34ohm               (7 << 3)
+PAD_CTL_SRE_FAST                (1 << 0)
+PAD_CTL_SRE_SLOW                (0 << 0)
+
+Refer to imx6sl-pinfunc.h in device tree source folder for all available
+imx6sl PIN_FUNC_ID.