ARM: dts: TWL4030: fix mux and wakeup for SYS_NIRQ line

On most OMAP3 platforms, the twl4030 IRQ line is connected to the
SYS_NIRQ line on OMAP.  Add another DTS include file
(twl4030_omap3.dtsi) for boards that hook up the twl4030 this way
to include.

This allows RTC wake from off-mode to work again on OMAP3-based
platforms with twl4030.  Tested on 3530/Beagle, 3730/Beagle-xM,
3530/Overo, 3730/Overo-STORM.

Special thanks to Florian Vaussard for suggesting use of preprocessor
feature.

Cc: Florian Vaussard <florian.vaussard@epfl.ch>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>

arch/arm/boot/dts/omap3-beagle-xm.dts

@@ -96,6 +96,7 @@
 };
 
 #include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
 
 &i2c2 {
 	clock-frequency = <400000>;

arch/arm/boot/dts/omap3-beagle.dts

@@ -135,6 +135,7 @@
 };
 
 #include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
 
 &mmc1 {
 	vmmc-supply = <&vmmc1>;

arch/arm/boot/dts/omap3-devkit8000.dts

@@ -81,6 +81,7 @@
 };
 
 #include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
 
 &mmc1 {
 	vmmc-supply = <&vmmc1>;

arch/arm/boot/dts/omap3-evm.dts

@@ -45,6 +45,7 @@
 };
 
 #include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
 
 &i2c2 {
 	clock-frequency = <400000>;

arch/arm/boot/dts/omap3-igep.dtsi

@@ -87,6 +87,7 @@
 };
 
 #include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
 
 &i2c2 {
 	clock-frequency = <400000>;

arch/arm/boot/dts/omap3-overo.dtsi

@@ -50,6 +50,7 @@
 };
 
 #include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
 
 /* i2c2 pins are used for gpio */
 &i2c2 {

arch/arm/boot/dts/omap3430-sdp.dts

@@ -29,6 +29,7 @@
 };
 
 #include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
 
 &mmc1 {
 	vmmc-supply = <&vmmc1>;

arch/arm/boot/dts/twl4030_omap3.dtsi

@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2013 Linaro, Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&twl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&twl4030_pins>;
+};
+
+&omap3_pmx_core {
+	/*
+	 * On most OMAP3 platforms, the twl4030 IRQ line is connected
+	 * to the SYS_NIRQ line on OMAP.  Therefore, configure the
+	 * defaults for the SYS_NIRQ pin here.
+	 */
+	twl4030_pins: pinmux_twl4030_pins {
+		pinctrl-single,pins = <
+			0x1b0 (PIN_INPUT_PULLUP | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */
+		>;
+	};
+};