Merge branch 'next/fixes-non-critical' into next/drivers

Conflicts:
	arch/arm/mach-lpc32xx/clock.c
	arch/arm/mach-pxa/pxa25x.c
	arch/arm/mach-pxa/pxa27x.c

The conflicts with pxa are non-obvious, we have multiple branches
adding and removing the same clock settings. According to
Haojian Zhuang, removing the sa1100 rtc dummy clock is the correct
fix here.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/gpio/led.txt

@@ -7,9 +7,9 @@ Each LED is represented as a sub-node of the gpio-leds device.  Each
 node's name represents the name of the corresponding LED.
 
 LED sub-node properties:
-- gpios :  Should specify the LED's GPIO, see "Specifying GPIO information
-  for devices" in Documentation/devicetree/booting-without-of.txt.  Active
-  low LEDs should be indicated using flags in the GPIO specifier.
+- gpios :  Should specify the LED's GPIO, see "gpios property" in
+  Documentation/devicetree/gpio.txt.  Active low LEDs should be
+  indicated using flags in the GPIO specifier.
 - label :  (optional) The label for this LED.  If omitted, the label is
   taken from the node name (excluding the unit address).
 - linux,default-trigger :  (optional) This parameter, if present, is a

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -30,6 +30,7 @@ national	National Semiconductor
 nintendo	Nintendo
 nvidia	NVIDIA
 nxp	NXP Semiconductors
+picochip	Picochip Ltd
 powervr	Imagination Technologies
 qcom	Qualcomm, Inc.
 ramtron	Ramtron International

Documentation/hwmon/jc42

@@ -7,21 +7,29 @@ Supported chips:
     Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
 	http://www.analog.com/static/imported-files/data_sheets/ADT7408.pdf
-  * IDT TSE2002B3, TS3000B3
-    Prefix: 'tse2002b3', 'ts3000b3'
+  * Atmel AT30TS00
+    Prefix: 'at30ts00'
     Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
-	http://www.idt.com/products/getdoc.cfm?docid=18715691
-	http://www.idt.com/products/getdoc.cfm?docid=18715692
+	http://www.atmel.com/Images/doc8585.pdf
+  * IDT TSE2002B3, TSE2002GB2, TS3000B3, TS3000GB2
+    Prefix: 'tse2002', 'ts3000'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheets:
+	http://www.idt.com/sites/default/files/documents/IDT_TSE2002B3C_DST_20100512_120303152056.pdf
+	http://www.idt.com/sites/default/files/documents/IDT_TSE2002GB2A1_DST_20111107_120303145914.pdf
+	http://www.idt.com/sites/default/files/documents/IDT_TS3000B3A_DST_20101129_120303152013.pdf
+	http://www.idt.com/sites/default/files/documents/IDT_TS3000GB2A1_DST_20111104_120303151012.pdf
   * Maxim MAX6604
     Prefix: 'max6604'
     Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
 	http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf
-  * Microchip MCP9805, MCP98242, MCP98243, MCP9843
-    Prefixes: 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843'
+  * Microchip MCP9804, MCP9805, MCP98242, MCP98243, MCP9843
+    Prefixes: 'mcp9804', 'mcp9805', 'mcp98242', 'mcp98243', 'mcp9843'
     Addresses scanned: I2C 0x18 - 0x1f
     Datasheets:
+	http://ww1.microchip.com/downloads/en/DeviceDoc/22203C.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf
@@ -48,6 +56,12 @@ Supported chips:
     Datasheets:
 	http://www.st.com/stonline/products/literature/ds/13447/stts424.pdf
 	http://www.st.com/stonline/products/literature/ds/13448/stts424e02.pdf
+  * ST Microelectronics STTS2002, STTS3000
+    Prefix: 'stts2002', 'stts3000'
+    Addresses scanned: I2C 0x18 - 0x1f
+    Datasheets:
+	http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00225278.pdf
+	http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATA_BRIEF/CD00270920.pdf
   * JEDEC JC 42.4 compliant temperature sensor chips
     Prefix: 'jc42'
     Addresses scanned: I2C 0x18 - 0x1f

Documentation/input/alps.txt

@@ -13,7 +13,8 @@ Detection
 
 All ALPS touchpads should respond to the "E6 report" command sequence:
 E8-E6-E6-E6-E9. An ALPS touchpad should respond with either 00-00-0A or
-00-00-64.
+00-00-64 if no buttons are pressed. The bits 0-2 of the first byte will be 1s
+if some buttons are pressed.
 
 If the E6 report is successful, the touchpad model is identified using the "E7
 report" sequence: E8-E7-E7-E7-E9. The response is the model signature and is

Documentation/kernel-parameters.txt

@@ -2211,6 +2211,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 			default: off.
 
+	printk.always_kmsg_dump=
+			Trigger kmsg_dump for cases other than kernel oops or
+			panics
+			Format: <bool>  (1/Y/y=enable, 0/N/n=disable)
+			default: disabled
+
 	printk.time=	Show timing data prefixed to each printk message line
 			Format: <bool>  (1/Y/y=enable, 0/N/n=disable)
 

MAINTAINERS

@@ -962,7 +962,7 @@ F:	drivers/tty/serial/msm_serial.c
 F:	drivers/platform/msm/
 F:	drivers/*/pm8???-*
 F:	include/linux/mfd/pm8xxx/
-T:	git git://codeaurora.org/quic/kernel/davidb/linux-msm.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git
 S:	Maintained
 
 ARM/TOSA MACHINE SUPPORT
@@ -1310,7 +1310,7 @@ F:	drivers/atm/
 F:	include/linux/atm*
 
 ATMEL AT91 MCI DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@atmel.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.atmel.com/products/AT91/
 W:	http://www.at91.com/
@@ -1318,7 +1318,7 @@ S:	Maintained
 F:	drivers/mmc/host/at91_mci.c
 
 ATMEL AT91 / AT32 MCI DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@atmel.com>
 S:	Maintained
 F:	drivers/mmc/host/atmel-mci.c
 F:	drivers/mmc/host/atmel-mci-regs.h

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 3
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/alpha/include/asm/futex.h

@@ -108,7 +108,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 	"	lda	$31,3b-2b(%0)\n"
 	"	.previous\n"
 	:	"+r"(ret), "=&r"(prev), "=&r"(cmp)
-	:	"r"(uaddr), "r"((long)oldval), "r"(newval)
+	:	"r"(uaddr), "r"((long)(int)oldval), "r"(newval)
 	:	"memory");
 
 	*uval = prev;

arch/arm/Kconfig

@@ -901,6 +901,7 @@ config ARCH_U300
 
 config ARCH_U8500
 	bool "ST-Ericsson U8500 Series"
+	depends on MMU
 	select CPU_V7
 	select ARM_AMBA
 	select GENERIC_CLOCKEVENTS
@@ -1280,7 +1281,7 @@ config ARM_ERRATA_743622
 	depends on CPU_V7
 	help
 	  This option enables the workaround for the 743622 Cortex-A9
-	  (r2p0..r2p2) erratum. Under very rare conditions, a faulty
+	  (r2p*) erratum. Under very rare conditions, a faulty
 	  optimisation in the Cortex-A9 Store Buffer may lead to data
 	  corruption. This workaround sets a specific bit in the diagnostic
 	  register of the Cortex-A9 which disables the Store Buffer
@@ -1577,7 +1578,7 @@ config LOCAL_TIMERS
 config ARCH_NR_GPIO
 	int
 	default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
-	default 350 if ARCH_U8500
+	default 355 if ARCH_U8500
 	default 0
 	help
 	  Maximum number of GPIOs in the system.

arch/arm/boot/.gitignore

@@ -3,3 +3,4 @@ zImage
 xipImage
 bootpImage
 uImage
+*.dtb

arch/arm/configs/imx_v4_v5_defconfig

@@ -69,6 +69,7 @@ CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
 CONFIG_MTD_CFI_GEOMETRY=y
 # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
 # CONFIG_MTD_CFI_I2 is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_PHYSMAP=y

arch/arm/configs/lpc32xx_defconfig

@@ -0,0 +1,145 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ARCH_LPC32XX=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200n81 root=/dev/ram0"
+CONFIG_CPU_IDLE=y
+CONFIG_FPE_NWFPE=y
+CONFIG_VFP=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_AOUT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_MUSEUM_IDS=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_MISC_DEVICES=y
+CONFIG_EEPROM_AT25=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_PHYLIB=y
+CONFIG_SMSC_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_LPC32XX=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_PNX=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_PNX4008_WATCHDOG=y
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_SOC=y
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_LIBUSUAL=y
+CONFIG_MMC=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_ARMMMCI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_LPC32XX=y
+CONFIG_EXT2_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_FTRACE is not set
+# CONFIG_ARM_UNWIND is not set
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CRYPTO_ANSI_CPRNG=y
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=y

arch/arm/include/asm/pmu.h

@@ -134,7 +134,7 @@ int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type);
 
 u64 armpmu_event_update(struct perf_event *event,
 			struct hw_perf_event *hwc,
-			int idx, int overflow);
+			int idx);
 
 int armpmu_event_set_period(struct perf_event *event,
 			    struct hw_perf_event *hwc,

arch/arm/kernel/ecard.c

@@ -242,6 +242,7 @@ static void ecard_init_pgtables(struct mm_struct *mm)
 
 	memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE));
 
+	vma.vm_flags = VM_EXEC;
 	vma.vm_mm = mm;
 
 	flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE);

arch/arm/kernel/perf_event.c

@@ -180,7 +180,7 @@ armpmu_event_set_period(struct perf_event *event,
 u64
 armpmu_event_update(struct perf_event *event,
 		    struct hw_perf_event *hwc,
-		    int idx, int overflow)
+		    int idx)
 {
 	struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
 	u64 delta, prev_raw_count, new_raw_count;
@@ -193,13 +193,7 @@ again:
 			     new_raw_count) != prev_raw_count)
 		goto again;
 
-	new_raw_count &= armpmu->max_period;
-	prev_raw_count &= armpmu->max_period;
-
-	if (overflow)
-		delta = armpmu->max_period - prev_raw_count + new_raw_count + 1;
-	else
-		delta = new_raw_count - prev_raw_count;
+	delta = (new_raw_count - prev_raw_count) & armpmu->max_period;
 
 	local64_add(delta, &event->count);
 	local64_sub(delta, &hwc->period_left);
@@ -216,7 +210,7 @@ armpmu_read(struct perf_event *event)
 	if (hwc->idx < 0)
 		return;
 
-	armpmu_event_update(event, hwc, hwc->idx, 0);
+	armpmu_event_update(event, hwc, hwc->idx);
 }
 
 static void
@@ -232,7 +226,7 @@ armpmu_stop(struct perf_event *event, int flags)
 	if (!(hwc->state & PERF_HES_STOPPED)) {
 		armpmu->disable(hwc, hwc->idx);
 		barrier(); /* why? */
-		armpmu_event_update(event, hwc, hwc->idx, 0);
+		armpmu_event_update(event, hwc, hwc->idx);
 		hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
 	}
 }
@@ -518,7 +512,13 @@ __hw_perf_event_init(struct perf_event *event)
 	hwc->config_base	    |= (unsigned long)mapping;
 
 	if (!hwc->sample_period) {
-		hwc->sample_period  = armpmu->max_period;
+		/*
+		 * For non-sampling runs, limit the sample_period to half
+		 * of the counter width. That way, the new counter value
+		 * is far less likely to overtake the previous one unless
+		 * you have some serious IRQ latency issues.
+		 */
+		hwc->sample_period  = armpmu->max_period >> 1;
 		hwc->last_period    = hwc->sample_period;
 		local64_set(&hwc->period_left, hwc->sample_period);
 	}
@@ -679,6 +679,28 @@ static void __init cpu_pmu_init(struct arm_pmu *armpmu)
 	armpmu->type = ARM_PMU_DEVICE_CPU;
 }
 
+/*
+ * PMU hardware loses all context when a CPU goes offline.
+ * When a CPU is hotplugged back in, since some hardware registers are
+ * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading
+ * junk values out of them.
+ */
+static int __cpuinit pmu_cpu_notify(struct notifier_block *b,
+					unsigned long action, void *hcpu)
+{
+	if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING)
+		return NOTIFY_DONE;
+
+	if (cpu_pmu && cpu_pmu->reset)
+		cpu_pmu->reset(NULL);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata pmu_cpu_notifier = {
+	.notifier_call = pmu_cpu_notify,
+};
+
 /*
  * CPU PMU identification and registration.
  */
@@ -730,6 +752,7 @@ init_hw_perf_events(void)
 		pr_info("enabled with %s PMU driver, %d counters available\n",
 			cpu_pmu->name, cpu_pmu->num_events);
 		cpu_pmu_init(cpu_pmu);
+		register_cpu_notifier(&pmu_cpu_notifier);
 		armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW);
 	} else {
 		pr_info("no hardware support available\n");

arch/arm/kernel/perf_event_v6.c

@@ -467,23 +467,6 @@ armv6pmu_enable_event(struct hw_perf_event *hwc,
 	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 
-static int counter_is_active(unsigned long pmcr, int idx)
-{
-	unsigned long mask = 0;
-	if (idx == ARMV6_CYCLE_COUNTER)
-		mask = ARMV6_PMCR_CCOUNT_IEN;
-	else if (idx == ARMV6_COUNTER0)
-		mask = ARMV6_PMCR_COUNT0_IEN;
-	else if (idx == ARMV6_COUNTER1)
-		mask = ARMV6_PMCR_COUNT1_IEN;
-
-	if (mask)
-		return pmcr & mask;
-
-	WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-	return 0;
-}
-
 static irqreturn_t
 armv6pmu_handle_irq(int irq_num,
 		    void *dev)
@@ -513,7 +496,8 @@ armv6pmu_handle_irq(int irq_num,
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
-		if (!counter_is_active(pmcr, idx))
+		/* Ignore if we don't have an event. */
+		if (!event)
 			continue;
 
 		/*
@@ -524,7 +508,7 @@ armv6pmu_handle_irq(int irq_num,
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;

arch/arm/kernel/perf_event_v7.c

@@ -809,6 +809,11 @@ static inline int armv7_pmnc_disable_intens(int idx)
 
 	counter = ARMV7_IDX_TO_COUNTER(idx);
 	asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter)));
+	isb();
+	/* Clear the overflow flag in case an interrupt is pending. */
+	asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (BIT(counter)));
+	isb();
+
 	return idx;
 }
 
@@ -955,6 +960,10 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
+		/* Ignore if we don't have an event. */
+		if (!event)
+			continue;
+
 		/*
 		 * We have a single interrupt for all counters. Check that
 		 * each counter has overflowed before we process it.
@@ -963,7 +972,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;

arch/arm/kernel/perf_event_xscale.c

@@ -255,11 +255,14 @@ xscale1pmu_handle_irq(int irq_num, void *dev)
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
+		if (!event)
+			continue;
+
 		if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
@@ -592,11 +595,14 @@ xscale2pmu_handle_irq(int irq_num, void *dev)
 		struct perf_event *event = cpuc->events[idx];
 		struct hw_perf_event *hwc;
 
-		if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx))
+		if (!event)
+			continue;
+
+		if (!xscale2_pmnc_counter_has_overflowed(of_flags, idx))
 			continue;
 
 		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx, 1);
+		armpmu_event_update(event, hwc, idx);
 		data.period = event->hw.last_period;
 		if (!armpmu_event_set_period(event, hwc, idx))
 			continue;
@@ -663,7 +669,7 @@ xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx)
 static void
 xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
 {
-	unsigned long flags, ien, evtsel;
+	unsigned long flags, ien, evtsel, of_flags;
 	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
 
 	ien = xscale2pmu_read_int_enable();
@@ -672,26 +678,31 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
 	switch (idx) {
 	case XSCALE_CYCLE_COUNTER:
 		ien &= ~XSCALE2_CCOUNT_INT_EN;
+		of_flags = XSCALE2_CCOUNT_OVERFLOW;
 		break;
 	case XSCALE_COUNTER0:
 		ien &= ~XSCALE2_COUNT0_INT_EN;
 		evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT;
+		of_flags = XSCALE2_COUNT0_OVERFLOW;
 		break;
 	case XSCALE_COUNTER1:
 		ien &= ~XSCALE2_COUNT1_INT_EN;
 		evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT;
+		of_flags = XSCALE2_COUNT1_OVERFLOW;
 		break;
 	case XSCALE_COUNTER2:
 		ien &= ~XSCALE2_COUNT2_INT_EN;
 		evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT;
+		of_flags = XSCALE2_COUNT2_OVERFLOW;
 		break;
 	case XSCALE_COUNTER3:
 		ien &= ~XSCALE2_COUNT3_INT_EN;
 		evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
 		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT;
+		of_flags = XSCALE2_COUNT3_OVERFLOW;
 		break;
 	default:
 		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
@@ -701,6 +712,7 @@ xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
 	raw_spin_lock_irqsave(&events->pmu_lock, flags);
 	xscale2pmu_write_event_select(evtsel);
 	xscale2pmu_write_int_enable(ien);
+	xscale2pmu_write_overflow_flags(of_flags);
 	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
 }
 

arch/arm/mach-davinci/cpufreq.c

@@ -95,7 +95,7 @@ static int davinci_target(struct cpufreq_policy *policy,
 	if (freqs.old == freqs.new)
 		return ret;
 
-	dev_dbg(&cpufreq.dev, "transition: %u --> %u\n", freqs.old, freqs.new);
+	dev_dbg(cpufreq.dev, "transition: %u --> %u\n", freqs.old, freqs.new);
 
 	ret = cpufreq_frequency_table_target(policy, pdata->freq_table,
 						freqs.new, relation, &idx);

arch/arm/mach-davinci/da850.c

@@ -1026,7 +1026,7 @@ static int da850_round_armrate(struct clk *clk, unsigned long rate)
 }
 #endif
 
-int da850_register_pm(struct platform_device *pdev)
+int __init da850_register_pm(struct platform_device *pdev)
 {
 	int ret;
 	struct davinci_pm_config *pdata = pdev->dev.platform_data;

arch/arm/mach-davinci/dma.c

@@ -1508,12 +1508,8 @@ static int __init edma_probe(struct platform_device *pdev)
 			goto fail;
 		}
 
-		/* Everything lives on transfer controller 1 until otherwise
-		 * specified. This way, long transfers on the low priority queue
-		 * started by the codec engine will not cause audio defects.
-		 */
 		for (i = 0; i < edma_cc[j]->num_channels; i++)
-			map_dmach_queue(j, i, EVENTQ_1);
+			map_dmach_queue(j, i, info[j]->default_queue);
 
 		queue_tc_mapping = info[j]->queue_tc_mapping;
 		queue_priority_mapping = info[j]->queue_priority_mapping;

arch/arm/mach-davinci/include/mach/edma.h

@@ -250,6 +250,11 @@ struct edma_soc_info {
 	unsigned	n_slot;
 	unsigned	n_tc;
 	unsigned	n_cc;
+	/*
+	 * Default queue is expected to be a low-priority queue.
+	 * This way, long transfers on the default queue started
+	 * by the codec engine will not cause audio defects.
+	 */
 	enum dma_event_q	default_queue;
 
 	/* Resource reservation for other cores */

arch/arm/mach-ep93xx/vision_ep9307.c

@@ -34,6 +34,7 @@
 #include <mach/ep93xx_spi.h>
 #include <mach/gpio-ep93xx.h>
 
+#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
@@ -361,6 +362,7 @@ MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
 	.atag_offset	= 0x100,
 	.map_io		= vision_map_io,
 	.init_irq	= ep93xx_init_irq,
+	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= vision_init_machine,
 	.restart	= ep93xx_restart,

arch/arm/mach-exynos/mach-universal_c210.c

@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
+#include <linux/interrupt.h>
 #include <linux/fb.h>
 #include <linux/mfd/max8998.h>
 #include <linux/regulator/machine.h>
@@ -595,6 +596,7 @@ static struct mxt_platform_data qt602240_platform_data = {
 	.threshold	= 0x28,
 	.voltage	= 2800000,		/* 2.8V */
 	.orient		= MXT_DIAGONAL,
+	.irqflags	= IRQF_TRIGGER_FALLING,
 };
 
 static struct i2c_board_info i2c3_devs[] __initdata = {

arch/arm/mach-imx/mach-pcm038.c

@@ -233,7 +233,7 @@ static struct regulator_init_data sdhc1_data = {
 
 static struct regulator_consumer_supply cam_consumers[] = {
 	{
-		.dev	= NULL,
+		.dev_name = NULL,
 		.supply	= "imx_cam_vcc",
 	},
 };

arch/arm/mach-imx/mm-imx3.c

@@ -76,7 +76,7 @@ static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size,
 	return __arm_ioremap(phys_addr, size, mtype);
 }
 
-void imx3_init_l2x0(void)
+void __init imx3_init_l2x0(void)
 {
 	void __iomem *l2x0_base;
 	void __iomem *clkctl_base;

arch/arm/mach-lpc32xx/clock.c

@@ -82,6 +82,7 @@
  *   will also impact the individual peripheral rates.
  */
 
+#include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/errno.h>
@@ -97,9 +98,10 @@
 #include "clock.h"
 #include "common.h"
 
+static DEFINE_SPINLOCK(global_clkregs_lock);
+
 static struct clk clk_armpll;
 static struct clk clk_usbpll;
-static DEFINE_MUTEX(clkm_lock);
 
 /*
  * Post divider values for PLLs based on selected register value
@@ -127,7 +129,7 @@ static struct clk osc_32KHz = {
 static int local_pll397_enable(struct clk *clk, int enable)
 {
 	u32 reg;
-	unsigned long timeout = 1 + msecs_to_jiffies(10);
+	unsigned long timeout = jiffies + msecs_to_jiffies(10);
 
 	reg = __raw_readl(LPC32XX_CLKPWR_PLL397_CTRL);
 
@@ -142,7 +144,7 @@ static int local_pll397_enable(struct clk *clk, int enable)
 		/* Wait for PLL397 lock */
 		while (((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) &
 			LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0) &&
-			(timeout > jiffies))
+			time_before(jiffies, timeout))
 			cpu_relax();
 
 		if ((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) &
@@ -156,7 +158,7 @@ static int local_pll397_enable(struct clk *clk, int enable)
 static int local_oscmain_enable(struct clk *clk, int enable)
 {
 	u32 reg;
-	unsigned long timeout = 1 + msecs_to_jiffies(10);
+	unsigned long timeout = jiffies + msecs_to_jiffies(10);
 
 	reg = __raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL);
 
@@ -171,7 +173,7 @@ static int local_oscmain_enable(struct clk *clk, int enable)
 		/* Wait for main oscillator to start */
 		while (((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) &
 			LPC32XX_CLKPWR_MOSC_DISABLE) != 0) &&
-			(timeout > jiffies))
+			time_before(jiffies, timeout))
 			cpu_relax();
 
 		if ((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) &
@@ -383,7 +385,7 @@ static int local_usbpll_enable(struct clk *clk, int enable)
 {
 	u32 reg;
 	int ret = -ENODEV;
-	unsigned long timeout = 1 + msecs_to_jiffies(10);
+	unsigned long timeout = jiffies + msecs_to_jiffies(10);
 
 	reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
 
@@ -396,7 +398,7 @@ static int local_usbpll_enable(struct clk *clk, int enable)
 		__raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL);
 
 		/* Wait for PLL lock */
-		while ((timeout > jiffies) & (ret == -ENODEV)) {
+		while (time_before(jiffies, timeout) && (ret == -ENODEV)) {
 			reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL);
 			if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_STS)
 				ret = 0;
@@ -926,20 +928,8 @@ static struct clk clk_lcd = {
 	.enable_mask	= LPC32XX_CLKPWR_LCDCTRL_CLK_EN,
 };
 
-static inline void clk_lock(void)
-{
-	mutex_lock(&clkm_lock);
-}
-
-static inline void clk_unlock(void)
-{
-	mutex_unlock(&clkm_lock);
-}
-
 static void local_clk_disable(struct clk *clk)
 {
-	WARN_ON(clk->usecount == 0);
-
 	/* Don't attempt to disable clock if it has no users */
 	if (clk->usecount > 0) {
 		clk->usecount--;
@@ -982,10 +972,11 @@ static int local_clk_enable(struct clk *clk)
 int clk_enable(struct clk *clk)
 {
 	int ret;
+	unsigned long flags;
 
-	clk_lock();
+	spin_lock_irqsave(&global_clkregs_lock, flags);
 	ret = local_clk_enable(clk);
-	clk_unlock();
+	spin_unlock_irqrestore(&global_clkregs_lock, flags);
 
 	return ret;
 }
@@ -996,9 +987,11 @@ EXPORT_SYMBOL(clk_enable);
  */
 void clk_disable(struct clk *clk)
 {
-	clk_lock();
+	unsigned long flags;
+
+	spin_lock_irqsave(&global_clkregs_lock, flags);
 	local_clk_disable(clk);
-	clk_unlock();
+	spin_unlock_irqrestore(&global_clkregs_lock, flags);
 }
 EXPORT_SYMBOL(clk_disable);
 
@@ -1007,13 +1000,7 @@ EXPORT_SYMBOL(clk_disable);
  */
 unsigned long clk_get_rate(struct clk *clk)
 {
-	unsigned long rate;
-
-	clk_lock();
-	rate = clk->get_rate(clk);
-	clk_unlock();
-
-	return rate;
+	return clk->get_rate(clk);
 }
 EXPORT_SYMBOL(clk_get_rate);
 
@@ -1029,11 +1016,8 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 	 * the actual rate set as part of the peripheral dividers
 	 * instead of high level clock control
 	 */
-	if (clk->set_rate) {
-		clk_lock();
+	if (clk->set_rate)
 		ret = clk->set_rate(clk, rate);
-		clk_unlock();
-	}
 
 	return ret;
 }
@@ -1044,15 +1028,11 @@ EXPORT_SYMBOL(clk_set_rate);
  */
 long clk_round_rate(struct clk *clk, unsigned long rate)
 {
-	clk_lock();
-
 	if (clk->round_rate)
 		rate = clk->round_rate(clk, rate);
 	else
 		rate = clk->get_rate(clk);
 
-	clk_unlock();
-
 	return rate;
 }
 EXPORT_SYMBOL(clk_round_rate);
@@ -1111,10 +1091,10 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("lpc32xx_keys.0", NULL, clk_kscan)
 	_REGISTER_CLOCK("lpc32xx-nand.0", "nand_ck", clk_nand)
 	_REGISTER_CLOCK("lpc32xx-adc", NULL, clk_adc)
-	_REGISTER_CLOCK("tbd", "i2s0_ck", clk_i2s0)
-	_REGISTER_CLOCK("tbd", "i2s1_ck", clk_i2s1)
+	_REGISTER_CLOCK(NULL, "i2s0_ck", clk_i2s0)
+	_REGISTER_CLOCK(NULL, "i2s1_ck", clk_i2s1)
 	_REGISTER_CLOCK("ts-lpc32xx", NULL, clk_tsc)
-	_REGISTER_CLOCK("dev:mmc0", "MCLK", clk_mmc)
+	_REGISTER_CLOCK("dev:mmc0", NULL, clk_mmc)
 	_REGISTER_CLOCK("lpc-net.0", NULL, clk_net)
 	_REGISTER_CLOCK("dev:clcd", NULL, clk_lcd)
 	_REGISTER_CLOCK("lpc32xx_udc", "ck_usbd", clk_usbd)

arch/arm/mach-lpc32xx/common.h

@@ -66,7 +66,6 @@ extern u32 clk_get_pclk_div(void);
  */
 extern void lpc32xx_get_uid(u32 devid[4]);
 
-extern void lpc32xx_watchdog_reset(void);
 extern u32 lpc32xx_return_iram_size(void);
 
 /*

arch/arm/mach-lpc32xx/include/mach/platform.h

@@ -591,42 +591,42 @@
 /*
  * Timer/counter register offsets
  */
-#define LCP32XX_TIMER_IR(x)			io_p2v((x) + 0x00)
-#define LCP32XX_TIMER_TCR(x)			io_p2v((x) + 0x04)
-#define LCP32XX_TIMER_TC(x)			io_p2v((x) + 0x08)
-#define LCP32XX_TIMER_PR(x)			io_p2v((x) + 0x0C)
-#define LCP32XX_TIMER_PC(x)			io_p2v((x) + 0x10)
-#define LCP32XX_TIMER_MCR(x)			io_p2v((x) + 0x14)
-#define LCP32XX_TIMER_MR0(x)			io_p2v((x) + 0x18)
-#define LCP32XX_TIMER_MR1(x)			io_p2v((x) + 0x1C)
-#define LCP32XX_TIMER_MR2(x)			io_p2v((x) + 0x20)
-#define LCP32XX_TIMER_MR3(x)			io_p2v((x) + 0x24)
-#define LCP32XX_TIMER_CCR(x)			io_p2v((x) + 0x28)
-#define LCP32XX_TIMER_CR0(x)			io_p2v((x) + 0x2C)
-#define LCP32XX_TIMER_CR1(x)			io_p2v((x) + 0x30)
-#define LCP32XX_TIMER_CR2(x)			io_p2v((x) + 0x34)
-#define LCP32XX_TIMER_CR3(x)			io_p2v((x) + 0x38)
-#define LCP32XX_TIMER_EMR(x)			io_p2v((x) + 0x3C)
-#define LCP32XX_TIMER_CTCR(x)			io_p2v((x) + 0x70)
+#define LPC32XX_TIMER_IR(x)			io_p2v((x) + 0x00)
+#define LPC32XX_TIMER_TCR(x)			io_p2v((x) + 0x04)
+#define LPC32XX_TIMER_TC(x)			io_p2v((x) + 0x08)
+#define LPC32XX_TIMER_PR(x)			io_p2v((x) + 0x0C)
+#define LPC32XX_TIMER_PC(x)			io_p2v((x) + 0x10)
+#define LPC32XX_TIMER_MCR(x)			io_p2v((x) + 0x14)
+#define LPC32XX_TIMER_MR0(x)			io_p2v((x) + 0x18)
+#define LPC32XX_TIMER_MR1(x)			io_p2v((x) + 0x1C)
+#define LPC32XX_TIMER_MR2(x)			io_p2v((x) + 0x20)
+#define LPC32XX_TIMER_MR3(x)			io_p2v((x) + 0x24)
+#define LPC32XX_TIMER_CCR(x)			io_p2v((x) + 0x28)
+#define LPC32XX_TIMER_CR0(x)			io_p2v((x) + 0x2C)
+#define LPC32XX_TIMER_CR1(x)			io_p2v((x) + 0x30)
+#define LPC32XX_TIMER_CR2(x)			io_p2v((x) + 0x34)
+#define LPC32XX_TIMER_CR3(x)			io_p2v((x) + 0x38)
+#define LPC32XX_TIMER_EMR(x)			io_p2v((x) + 0x3C)
+#define LPC32XX_TIMER_CTCR(x)			io_p2v((x) + 0x70)
 
 /*
  * ir register definitions
  */
-#define LCP32XX_TIMER_CNTR_MTCH_BIT(n)		(1 << ((n) & 0x3))
-#define LCP32XX_TIMER_CNTR_CAPT_BIT(n)		(1 << (4 + ((n) & 0x3)))
+#define LPC32XX_TIMER_CNTR_MTCH_BIT(n)		(1 << ((n) & 0x3))
+#define LPC32XX_TIMER_CNTR_CAPT_BIT(n)		(1 << (4 + ((n) & 0x3)))
 
 /*
  * tcr register definitions
  */
-#define LCP32XX_TIMER_CNTR_TCR_EN		0x1
-#define LCP32XX_TIMER_CNTR_TCR_RESET		0x2
+#define LPC32XX_TIMER_CNTR_TCR_EN		0x1
+#define LPC32XX_TIMER_CNTR_TCR_RESET		0x2
 
 /*
  * mcr register definitions
  */
-#define LCP32XX_TIMER_CNTR_MCR_MTCH(n)		(0x1 << ((n) * 3))
-#define LCP32XX_TIMER_CNTR_MCR_RESET(n)		(0x1 << (((n) * 3) + 1))
-#define LCP32XX_TIMER_CNTR_MCR_STOP(n)		(0x1 << (((n) * 3) + 2))
+#define LPC32XX_TIMER_CNTR_MCR_MTCH(n)		(0x1 << ((n) * 3))
+#define LPC32XX_TIMER_CNTR_MCR_RESET(n)		(0x1 << (((n) * 3) + 1))
+#define LPC32XX_TIMER_CNTR_MCR_STOP(n)		(0x1 << (((n) * 3) + 2))
 
 /*
  * Standard UART register offsets
@@ -690,5 +690,8 @@
 #define LPC32XX_GPIO_P1_MUX_SET			_GPREG(0x130)
 #define LPC32XX_GPIO_P1_MUX_CLR			_GPREG(0x134)
 #define LPC32XX_GPIO_P1_MUX_STATE		_GPREG(0x138)
+#define LPC32XX_GPIO_P2_MUX_SET			_GPREG(0x028)
+#define LPC32XX_GPIO_P2_MUX_CLR			_GPREG(0x02C)
+#define LPC32XX_GPIO_P2_MUX_STATE		_GPREG(0x030)
 
 #endif

arch/arm/mach-lpc32xx/phy3250.c

@@ -247,6 +247,8 @@ static struct platform_device lpc32xx_gpio_led_device = {
 };
 
 static struct platform_device *phy3250_devs[] __initdata = {
+	&lpc32xx_rtc_device,
+	&lpc32xx_tsc_device,
 	&lpc32xx_i2c0_device,
 	&lpc32xx_i2c1_device,
 	&lpc32xx_i2c2_device,

arch/arm/mach-lpc32xx/pm.c

@@ -13,7 +13,7 @@
 /*
  * LPC32XX CPU and system power management
  *
- * The LCP32XX has three CPU modes for controlling system power: run,
+ * The LPC32XX has three CPU modes for controlling system power: run,
  * direct-run, and halt modes. When switching between halt and run modes,
  * the CPU transistions through direct-run mode. For Linux, direct-run
  * mode is not used in normal operation. Halt mode is used when the

arch/arm/mach-lpc32xx/timer.c

@@ -34,11 +34,11 @@
 static int lpc32xx_clkevt_next_event(unsigned long delta,
     struct clock_event_device *dev)
 {
-	__raw_writel(LCP32XX_TIMER_CNTR_TCR_RESET,
-		LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
-	__raw_writel(delta, LCP32XX_TIMER_PR(LPC32XX_TIMER0_BASE));
-	__raw_writel(LCP32XX_TIMER_CNTR_TCR_EN,
-		LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+	__raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET,
+		LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+	__raw_writel(delta, LPC32XX_TIMER_PR(LPC32XX_TIMER0_BASE));
+	__raw_writel(LPC32XX_TIMER_CNTR_TCR_EN,
+		LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
 
 	return 0;
 }
@@ -58,7 +58,7 @@ static void lpc32xx_clkevt_mode(enum clock_event_mode mode,
 		 * disable the timer to wait for the first call to
 		 * set_next_event().
 		 */
-		__raw_writel(0, LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+		__raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
 		break;
 
 	case CLOCK_EVT_MODE_UNUSED:
@@ -81,8 +81,8 @@ static irqreturn_t lpc32xx_timer_interrupt(int irq, void *dev_id)
 	struct clock_event_device *evt = &lpc32xx_clkevt;
 
 	/* Clear match */
-	__raw_writel(LCP32XX_TIMER_CNTR_MTCH_BIT(0),
-		LCP32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
+	__raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0),
+		LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
 
 	evt->event_handler(evt);
 
@@ -128,14 +128,14 @@ static void __init lpc32xx_timer_init(void)
 	clkrate = clkrate / clk_get_pclk_div();
 
 	/* Initial timer setup */
-	__raw_writel(0, LCP32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
-	__raw_writel(LCP32XX_TIMER_CNTR_MTCH_BIT(0),
-		LCP32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
-	__raw_writel(1, LCP32XX_TIMER_MR0(LPC32XX_TIMER0_BASE));
-	__raw_writel(LCP32XX_TIMER_CNTR_MCR_MTCH(0) |
-		LCP32XX_TIMER_CNTR_MCR_STOP(0) |
-		LCP32XX_TIMER_CNTR_MCR_RESET(0),
-		LCP32XX_TIMER_MCR(LPC32XX_TIMER0_BASE));
+	__raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE));
+	__raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0),
+		LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE));
+	__raw_writel(1, LPC32XX_TIMER_MR0(LPC32XX_TIMER0_BASE));
+	__raw_writel(LPC32XX_TIMER_CNTR_MCR_MTCH(0) |
+		LPC32XX_TIMER_CNTR_MCR_STOP(0) |
+		LPC32XX_TIMER_CNTR_MCR_RESET(0),
+		LPC32XX_TIMER_MCR(LPC32XX_TIMER0_BASE));
 
 	/* Setup tick interrupt */
 	setup_irq(IRQ_LPC32XX_TIMER0, &lpc32xx_timer_irq);
@@ -151,14 +151,14 @@ static void __init lpc32xx_timer_init(void)
 	clockevents_register_device(&lpc32xx_clkevt);
 
 	/* Use timer1 as clock source. */
-	__raw_writel(LCP32XX_TIMER_CNTR_TCR_RESET,
-		LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
-	__raw_writel(0, LCP32XX_TIMER_PR(LPC32XX_TIMER1_BASE));
-	__raw_writel(0, LCP32XX_TIMER_MCR(LPC32XX_TIMER1_BASE));
-	__raw_writel(LCP32XX_TIMER_CNTR_TCR_EN,
-		LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
-
-	clocksource_mmio_init(LCP32XX_TIMER_TC(LPC32XX_TIMER1_BASE),
+	__raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET,
+		LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
+	__raw_writel(0, LPC32XX_TIMER_PR(LPC32XX_TIMER1_BASE));
+	__raw_writel(0, LPC32XX_TIMER_MCR(LPC32XX_TIMER1_BASE));
+	__raw_writel(LPC32XX_TIMER_CNTR_TCR_EN,
+		LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
+
+	clocksource_mmio_init(LPC32XX_TIMER_TC(LPC32XX_TIMER1_BASE),
 		"lpc32xx_clksrc", clkrate, 300, 32, clocksource_mmio_readl_up);
 }
 

arch/arm/mach-omap1/io.c

@@ -118,7 +118,7 @@ void __init omap16xx_map_io(void)
 /*
  * Common low-level hardware init for omap1.
  */
-void omap1_init_early(void)
+void __init omap1_init_early(void)
 {
 	omap_check_revision();
 

arch/arm/mach-omap1/lcd_dma.c

@@ -117,7 +117,7 @@ EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
 void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
 {
 	if (cpu_is_omap15xx()) {
-		printk(KERN_ERR "DMA virtual resulotion is not supported "
+		printk(KERN_ERR "DMA virtual resolution is not supported "
 				"in 1510 mode\n");
 		BUG();
 	}

arch/arm/mach-omap2/Makefile

@@ -265,6 +265,8 @@ obj-y					+= $(smc91x-m) $(smc91x-y)
 
 smsc911x-$(CONFIG_SMSC911X)		:= gpmc-smsc911x.o
 obj-y					+= $(smsc911x-m) $(smsc911x-y)
-obj-$(CONFIG_ARCH_OMAP4)		+= hwspinlock.o
+ifneq ($(CONFIG_HWSPINLOCK_OMAP),)
+obj-y					+= hwspinlock.o
+endif
 
 obj-y					+= common-board-devices.o twl-common.o

arch/arm/mach-omap2/board-2430sdp.c

@@ -279,7 +279,7 @@ static void __init omap_2430sdp_init(void)
 	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);
-	omap2_hsmmc_init(mmc);
+	omap_hsmmc_init(mmc);
 	omap2_usbfs_init(&sdp2430_usb_config);
 
 	omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP);

arch/arm/mach-omap2/board-3430sdp.c

@@ -232,11 +232,13 @@ static struct omap2_hsmmc_info mmc[] = {
 		 */
 		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 		.gpio_wp	= 4,
+		.deferred	= true,
 	},
 	{
 		.mmc		= 2,
 		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 		.gpio_wp	= 7,
+		.deferred	= true,
 	},
 	{}	/* Terminator */
 };
@@ -249,7 +251,7 @@ static int sdp3430_twl_gpio_setup(struct device *dev,
 	 */
 	mmc[0].gpio_cd = gpio + 0;
 	mmc[1].gpio_cd = gpio + 1;
-	omap2_hsmmc_init(mmc);
+	omap_hsmmc_late_init(mmc);
 
 	/* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
 	gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "sub_lcd_en_bkl");
@@ -606,6 +608,7 @@ static void __init omap_3430sdp_init(void)
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_board_config = sdp3430_config;
 	omap_board_config_size = ARRAY_SIZE(sdp3430_config);
+	omap_hsmmc_init(mmc);
 	omap3430_i2c_init();
 	omap_display_init(&sdp3430_dss_data);
 	if (omap_rev() > OMAP3430_REV_ES1_0)

arch/arm/mach-omap2/board-4430sdp.c

@@ -491,9 +491,9 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
 {
 	struct omap2_hsmmc_info *c;
 
-	omap2_hsmmc_init(controllers);
+	omap_hsmmc_init(controllers);
 	for (c = controllers; c->mmc; c++)
-		omap4_twl6030_hsmmc_set_late_init(c->dev);
+		omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
 
 	return 0;
 }

arch/arm/mach-omap2/board-am3517evm.c

@@ -504,7 +504,7 @@ static void __init am3517_evm_init(void)
 	am3517_evm_musb_init();
 
 	/* MMC init function */
-	omap2_hsmmc_init(mmc);
+	omap_hsmmc_init(mmc);
 }
 
 MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")

arch/arm/mach-omap2/board-cm-t35.c

@@ -413,7 +413,7 @@ static struct omap2_hsmmc_info mmc[] = {
 		.caps		= MMC_CAP_4_BIT_DATA,
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= -EINVAL,
-
+		.deferred	= true,
 	},
 	{
 		.mmc		= 2,
@@ -471,7 +471,7 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
 
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
-	omap2_hsmmc_init(mmc);
+	omap_hsmmc_late_init(mmc);
 
 	return 0;
 }
@@ -639,6 +639,7 @@ static void __init cm_t3x_common_init(void)
 	omap_serial_init();
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
 			     mt46h32m32lf6_sdrc_params);
+	omap_hsmmc_init(mmc);
 	cm_t35_init_i2c();
 	omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL);
 	cm_t35_init_ethernet();

arch/arm/mach-omap2/board-devkit8000.c

@@ -100,6 +100,7 @@ static struct omap2_hsmmc_info mmc[] = {
 		.mmc		= 1,
 		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 		.gpio_wp	= 29,
+		.deferred	= true,
 	},
 	{}	/* Terminator */
 };
@@ -228,7 +229,7 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
 
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
-	omap2_hsmmc_init(mmc);
+	omap_hsmmc_late_init(mmc);
 
 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
@@ -636,6 +637,7 @@ static void __init devkit8000_init(void)
 
 	omap_dm9000_init();
 
+	omap_hsmmc_init(mmc);
 	devkit8000_i2c_init();
 	platform_add_devices(devkit8000_devices,
 			ARRAY_SIZE(devkit8000_devices));

arch/arm/mach-omap2/board-flash.c

@@ -189,7 +189,7 @@ unmap:
  *
  * @return - void.
  */
-void board_flash_init(struct flash_partitions partition_info[],
+void __init board_flash_init(struct flash_partitions partition_info[],
 			char chip_sel_board[][GPMC_CS_NUM], int nand_type)
 {
 	u8		cs = 0;

arch/arm/mach-omap2/board-igep0020.c

@@ -295,6 +295,7 @@ static struct omap2_hsmmc_info mmc[] = {
 		.caps		= MMC_CAP_4_BIT_DATA,
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= -EINVAL,
+		.deferred	= true,
 	},
 #if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
 	{
@@ -402,7 +403,7 @@ static int igep_twl_gpio_setup(struct device *dev,
 
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
-	omap2_hsmmc_init(mmc);
+	omap_hsmmc_late_init(mmc);
 
 	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
 #if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
@@ -639,6 +640,9 @@ static void __init igep_init(void)
 
 	/* Get IGEP2 hardware revision */
 	igep2_get_revision();
+
+	omap_hsmmc_init(mmc);
+
 	/* Register I2C busses and drivers */
 	igep_i2c_init();
 	platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices));

arch/arm/mach-omap2/board-ldp.c

@@ -27,7 +27,6 @@
 #include <linux/io.h>
 #include <linux/smsc911x.h>
 #include <linux/mmc/host.h>
-#include <linux/gpio.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -424,7 +423,7 @@ static void __init omap_ldp_init(void)
 	board_nand_init(ldp_nand_partitions,
 		ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
 
-	omap2_hsmmc_init(mmc);
+	omap_hsmmc_init(mmc);
 	ldp_display_init();
 }
 

arch/arm/mach-omap2/board-n8x0.c

@@ -36,10 +36,6 @@
 
 #include "mux.h"
 
-static int slot1_cover_open;
-static int slot2_cover_open;
-static struct device *mmc_device;
-
 #define TUSB6010_ASYNC_CS	1
 #define TUSB6010_SYNC_CS	4
 #define TUSB6010_GPIO_INT	58
@@ -211,6 +207,10 @@ static struct omap_onenand_platform_data board_onenand_data[] = {
 #define N810_EMMC_VSD_GPIO	23
 #define N810_EMMC_VIO_GPIO	9
 
+static int slot1_cover_open;
+static int slot2_cover_open;
+static struct device *mmc_device;
+
 static int n8x0_mmc_switch_slot(struct device *dev, int slot)
 {
 #ifdef CONFIG_MMC_DEBUG

arch/arm/mach-omap2/board-omap3beagle.c

@@ -253,6 +253,7 @@ static struct omap2_hsmmc_info mmc[] = {
 		.mmc		= 1,
 		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 		.gpio_wp	= -EINVAL,
+		.deferred	= true,
 	},
 	{}	/* Terminator */
 };
@@ -272,12 +273,10 @@ static int beagle_twl_gpio_setup(struct device *dev,
 {
 	int r;
 
-	if (beagle_config.mmc1_gpio_wp != -EINVAL)
-		omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
 	mmc[0].gpio_wp = beagle_config.mmc1_gpio_wp;
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
-	omap2_hsmmc_init(mmc);
+	omap_hsmmc_late_init(mmc);
 
 	/*
 	 * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
@@ -521,6 +520,11 @@ static void __init omap3_beagle_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap3_beagle_init_rev();
+
+	if (beagle_config.mmc1_gpio_wp != -EINVAL)
+		omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
+	omap_hsmmc_init(mmc);
+
 	omap3_beagle_i2c_init();
 
 	gpio_buttons[0].gpio = beagle_config.usr_button_gpio;

arch/arm/mach-omap2/board-omap3evm.c

@@ -317,6 +317,7 @@ static struct omap2_hsmmc_info mmc[] = {
 		.caps		= MMC_CAP_4_BIT_DATA,
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= 63,
+		.deferred	= true,
 	},
 #ifdef CONFIG_WL12XX_PLATFORM_DATA
 	{
@@ -361,9 +362,8 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
 	int r, lcd_bl_en;
 
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	omap_mux_init_gpio(63, OMAP_PIN_INPUT);
 	mmc[0].gpio_cd = gpio + 0;
-	omap2_hsmmc_init(mmc);
+	omap_hsmmc_late_init(mmc);
 
 	/*
 	 * Most GPIOs are for USB OTG.  Some are mostly sent to
@@ -644,6 +644,9 @@ static void __init omap3_evm_init(void)
 	omap_board_config = omap3_evm_config;
 	omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
 
+	omap_mux_init_gpio(63, OMAP_PIN_INPUT);
+	omap_hsmmc_init(mmc);
+
 	omap3_evm_i2c_init();
 
 	omap_display_init(&omap3_evm_dss_data);

arch/arm/mach-omap2/board-omap3logic.c

@@ -128,7 +128,7 @@ static void __init board_mmc_init(void)
 		return;
 	}
 
-	omap2_hsmmc_init(board_mmc_info);
+	omap_hsmmc_init(board_mmc_info);
 }
 
 static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = {

arch/arm/mach-omap2/board-omap3pandora.c

@@ -273,6 +273,7 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = {
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= 126,
 		.ext_clock	= 0,
+		.deferred	= true,
 	},
 	{
 		.mmc		= 2,
@@ -281,6 +282,7 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = {
 		.gpio_wp	= 127,
 		.ext_clock	= 1,
 		.transceiver	= true,
+		.deferred	= true,
 	},
 	{
 		.mmc		= 3,
@@ -300,7 +302,7 @@ static int omap3pandora_twl_gpio_setup(struct device *dev,
 	/* gpio + {0,1} is "mmc{0,1}_cd" (input/IRQ) */
 	omap3pandora_mmc[0].gpio_cd = gpio + 0;
 	omap3pandora_mmc[1].gpio_cd = gpio + 1;
-	omap2_hsmmc_init(omap3pandora_mmc);
+	omap_hsmmc_late_init(omap3pandora_mmc);
 
 	/* gpio + 13 drives 32kHz buffer for wifi module */
 	gpio_32khz = gpio + 13;
@@ -343,7 +345,7 @@ static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = {
 };
 
 static struct regulator_consumer_supply pandora_usb_phy_supply[] = {
-	REGULATOR_SUPPLY("hsusb0", "ehci-omap.0"),
+	REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"),
 };
 
 /* ads7846 on SPI and 2 nub controllers on I2C */
@@ -561,13 +563,13 @@ static struct platform_device *omap3pandora_devices[] __initdata = {
 
 static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
 	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 
 	.phy_reset  = true,
-	.reset_gpio_port[0]  = 16,
-	.reset_gpio_port[1]  = -EINVAL,
+	.reset_gpio_port[0]  = -EINVAL,
+	.reset_gpio_port[1]  = 16,
 	.reset_gpio_port[2]  = -EINVAL
 };
 
@@ -580,6 +582,7 @@ static struct omap_board_mux board_mux[] __initdata = {
 static void __init omap3pandora_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	omap_hsmmc_init(omap3pandora_mmc);
 	omap3pandora_i2c_init();
 	pandora_wl1251_init();
 	platform_add_devices(omap3pandora_devices,

arch/arm/mach-omap2/board-omap3stalker.c

@@ -209,10 +209,11 @@ static struct regulator_init_data omap3stalker_vsim = {
 
 static struct omap2_hsmmc_info mmc[] = {
 	{
-	 .mmc		= 1,
-	 .caps		= MMC_CAP_4_BIT_DATA,
-	 .gpio_cd	= -EINVAL,
-	 .gpio_wp	= 23,
+		.mmc		= 1,
+		.caps		= MMC_CAP_4_BIT_DATA,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= 23,
+		.deferred	= true,
 	 },
 	{}			/* Terminator */
 };
@@ -282,9 +283,8 @@ omap3stalker_twl_gpio_setup(struct device *dev,
 			    unsigned gpio, unsigned ngpio)
 {
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	omap_mux_init_gpio(23, OMAP_PIN_INPUT);
 	mmc[0].gpio_cd = gpio + 0;
-	omap2_hsmmc_init(mmc);
+	omap_hsmmc_late_init(mmc);
 
 	/*
 	 * Most GPIOs are for USB OTG.  Some are mostly sent to
@@ -425,6 +425,9 @@ static void __init omap3_stalker_init(void)
 	omap_board_config = omap3_stalker_config;
 	omap_board_config_size = ARRAY_SIZE(omap3_stalker_config);
 
+	omap_mux_init_gpio(23, OMAP_PIN_INPUT);
+	omap_hsmmc_init(mmc);
+
 	omap3_stalker_i2c_init();
 
 	platform_add_devices(omap3_stalker_devices,

arch/arm/mach-omap2/board-omap3touchbook.c

@@ -100,6 +100,7 @@ static struct omap2_hsmmc_info mmc[] = {
 		.mmc		= 1,
 		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 		.gpio_wp	= 29,
+		.deferred	= true,
 	},
 	{}	/* Terminator */
 };
@@ -117,15 +118,9 @@ static struct gpio_led gpio_leds[];
 static int touchbook_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
-	if (system_rev >= 0x20 && system_rev <= 0x34301000) {
-		omap_mux_init_gpio(23, OMAP_PIN_INPUT);
-		mmc[0].gpio_wp = 23;
-	} else {
-		omap_mux_init_gpio(29, OMAP_PIN_INPUT);
-	}
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
-	omap2_hsmmc_init(mmc);
+	omap_hsmmc_late_init(mmc);
 
 	/* REVISIT: need ehci-omap hooks for external VBUS
 	 * power switch and overcurrent detect
@@ -351,6 +346,14 @@ static void __init omap3_touchbook_init(void)
 
 	pm_power_off = omap3_touchbook_poweroff;
 
+	if (system_rev >= 0x20 && system_rev <= 0x34301000) {
+		omap_mux_init_gpio(23, OMAP_PIN_INPUT);
+		mmc[0].gpio_wp = 23;
+	} else {
+		omap_mux_init_gpio(29, OMAP_PIN_INPUT);
+	}
+	omap_hsmmc_init(mmc);
+
 	omap3_touchbook_i2c_init();
 	platform_add_devices(omap3_touchbook_devices,
 			ARRAY_SIZE(omap3_touchbook_devices));

arch/arm/mach-omap2/board-omap4panda.c

@@ -245,9 +245,9 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
 {
 	struct omap2_hsmmc_info *c;
 
-	omap2_hsmmc_init(controllers);
+	omap_hsmmc_init(controllers);
 	for (c = controllers; c->mmc; c++)
-		omap4_twl6030_hsmmc_set_late_init(c->dev);
+		omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
 
 	return 0;
 }
@@ -461,7 +461,7 @@ static struct omap_dss_board_info omap4_panda_dss_data = {
 	.default_device	= &omap4_panda_dvi_device,
 };
 
-void omap4_panda_display_init(void)
+void __init omap4_panda_display_init(void)
 {
 	int r;
 

arch/arm/mach-omap2/board-overo.c

@@ -407,8 +407,6 @@ static inline void __init overo_init_keys(void) { return; }
 static int overo_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
-	omap2_hsmmc_init(mmc);
-
 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
@@ -505,6 +503,7 @@ static void __init overo_init(void)
 	int ret;
 
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	omap_hsmmc_init(mmc);
 	overo_i2c_init();
 	omap_display_init(&overo_dss_data);
 	omap_serial_init();

arch/arm/mach-omap2/board-rm680.c

@@ -120,7 +120,7 @@ static void __init rm680_peripherals_init(void)
 				ARRAY_SIZE(rm680_peripherals_devices));
 	rm680_i2c_init();
 	gpmc_onenand_init(board_onenand_data);
-	omap2_hsmmc_init(mmc);
+	omap_hsmmc_init(mmc);
 }
 
 #ifdef CONFIG_OMAP_MUX

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -1145,7 +1145,7 @@ void __init rx51_peripherals_init(void)
 
 	partition = omap_mux_get("core");
 	if (partition)
-		omap2_hsmmc_init(mmc);
+		omap_hsmmc_init(mmc);
 
 	rx51_charger_init();
 }

arch/arm/mach-omap2/board-zoom-peripherals.c

@@ -205,6 +205,7 @@ static struct omap2_hsmmc_info mmc[] = {
 		.caps		= MMC_CAP_4_BIT_DATA,
 		.gpio_wp	= -EINVAL,
 		.power_saving	= true,
+		.deferred	= true,
 	},
 	{
 		.name		= "internal",
@@ -233,7 +234,7 @@ static int zoom_twl_gpio_setup(struct device *dev,
 
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
-	omap2_hsmmc_init(mmc);
+	omap_hsmmc_late_init(mmc);
 
 	ret = gpio_request_one(LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW,
 			       "lcd enable");
@@ -301,6 +302,7 @@ void __init zoom_peripherals_init(void)
 	if (ret)
 		pr_err("error setting wl12xx data: %d\n", ret);
 
+	omap_hsmmc_init(mmc);
 	omap_i2c_init();
 	platform_device_register(&omap_vwlan_device);
 	usb_musb_init(NULL);

arch/arm/mach-omap2/clkt_clksel.c

@@ -43,6 +43,7 @@
 #include <linux/errno.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/bug.h>
 
 #include <plat/clock.h>
 

arch/arm/mach-omap2/common-board-devices.c

@@ -76,13 +76,15 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
 			gpio_set_debounce(gpio_pendown, gpio_debounce);
 	}
 
-	ads7846_config.gpio_pendown = gpio_pendown;
-
 	spi_bi->bus_num	= bus_num;
 	spi_bi->irq	= OMAP_GPIO_IRQ(gpio_pendown);
 
-	if (board_pdata)
+	if (board_pdata) {
+		board_pdata->gpio_pendown = gpio_pendown;
 		spi_bi->platform_data = board_pdata;
+	} else {
+		ads7846_config.gpio_pendown = gpio_pendown;
+	}
 
 	spi_register_board_info(&ads7846_spi_board_info, 1);
 }

arch/arm/mach-omap2/control.h

@@ -338,6 +338,11 @@
 #define AM35XX_HECC_SW_RST		BIT(3)
 #define AM35XX_VPFE_PCLK_SW_RST		BIT(4)
 
+/*
+ * CONTROL AM33XX STATUS register
+ */
+#define AM33XX_CONTROL_STATUS		0x040
+
 /*
  * CONTROL OMAP STATUS register to identify OMAP3 features
  */

arch/arm/mach-omap2/devices.c

@@ -276,7 +276,7 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data
 }
 
 #if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE)
-static inline void omap_init_mbox(void)
+static inline void __init omap_init_mbox(void)
 {
 	struct omap_hwmod *oh;
 	struct platform_device *pdev;
@@ -337,7 +337,7 @@ static inline void omap_init_audio(void) {}
 #if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \
 		defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE)
 
-static void omap_init_mcpdm(void)
+static void __init omap_init_mcpdm(void)
 {
 	struct omap_hwmod *oh;
 	struct platform_device *pdev;
@@ -358,7 +358,7 @@ static inline void omap_init_mcpdm(void) {}
 #if defined(CONFIG_SND_OMAP_SOC_DMIC) || \
 		defined(CONFIG_SND_OMAP_SOC_DMIC_MODULE)
 
-static void omap_init_dmic(void)
+static void __init omap_init_dmic(void)
 {
 	struct omap_hwmod *oh;
 	struct platform_device *pdev;
@@ -380,7 +380,7 @@ static inline void omap_init_dmic(void) {}
 
 #include <plat/mcspi.h>
 
-static int omap_mcspi_init(struct omap_hwmod *oh, void *unused)
+static int __init omap_mcspi_init(struct omap_hwmod *oh, void *unused)
 {
 	struct platform_device *pdev;
 	char *name = "omap2_mcspi";

arch/arm/mach-omap2/display.c

@@ -124,7 +124,7 @@ static void omap4_hdmi_mux_pads(enum omap_hdmi_flags flags)
 	}
 }
 
-static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
+static int __init omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
 {
 	u32 enable_mask, enable_shift;
 	u32 pipd_mask, pipd_shift;
@@ -157,7 +157,7 @@ static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
 	return 0;
 }
 
-int omap_hdmi_init(enum omap_hdmi_flags flags)
+int __init omap_hdmi_init(enum omap_hdmi_flags flags)
 {
 	if (cpu_is_omap44xx())
 		omap4_hdmi_mux_pads(flags);
@@ -165,7 +165,7 @@ int omap_hdmi_init(enum omap_hdmi_flags flags)
 	return 0;
 }
 
-static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask)
+static int __init omap_dsi_enable_pads(int dsi_id, unsigned lane_mask)
 {
 	if (cpu_is_omap44xx())
 		return omap4_dsi_mux_pads(dsi_id, lane_mask);
@@ -173,7 +173,7 @@ static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask)
 	return 0;
 }
 
-static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask)
+static void __init omap_dsi_disable_pads(int dsi_id, unsigned lane_mask)
 {
 	if (cpu_is_omap44xx())
 		omap4_dsi_mux_pads(dsi_id, 0);

arch/arm/mach-omap2/dma.c

@@ -227,7 +227,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
 
 	dma_stride		= OMAP2_DMA_STRIDE;
 	dma_common_ch_start	= CSDP;
-	if (cpu_is_omap3630() || cpu_is_omap4430())
+	if (cpu_is_omap3630() || cpu_is_omap44xx())
 		dma_common_ch_end = CCDN;
 	else
 		dma_common_ch_end = CCFN;

arch/arm/mach-omap2/gpio.c

@@ -24,7 +24,7 @@
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
 
-static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
+static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 {
 	struct platform_device *pdev;
 	struct omap_gpio_platform_data *pdata;

arch/arm/mach-omap2/gpmc-smsc911x.c

@@ -101,10 +101,13 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
 
 	gpmc_cfg = board_data;
 
-	ret = platform_device_register(&gpmc_smsc911x_regulator);
-	if (ret < 0) {
-		pr_err("Unable to register smsc911x regulators: %d\n", ret);
-		return;
+	if (!gpmc_cfg->id) {
+		ret = platform_device_register(&gpmc_smsc911x_regulator);
+		if (ret < 0) {
+			pr_err("Unable to register smsc911x regulators: %d\n",
+			       ret);
+			return;
+		}
 	}
 
 	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {

arch/arm/mach-omap2/gpmc.c

@@ -888,6 +888,7 @@ int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size)
 	gpmc_write_reg(GPMC_ECC_CONFIG, val);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(gpmc_enable_hwecc);
 
 /**
  * gpmc_calculate_ecc - generate non-inverted ecc bytes
@@ -918,3 +919,4 @@ int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code)
 	gpmc_ecc_used = -EINVAL;
 	return 0;
 }
+EXPORT_SYMBOL_GPL(gpmc_calculate_ecc);

arch/arm/mach-omap2/hsmmc.c

@@ -293,8 +293,8 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller,
 	}
 }
 
-static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
-				 struct omap_mmc_platform_data *mmc)
+static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
+					struct omap_mmc_platform_data *mmc)
 {
 	char *hc_name;
 
@@ -429,66 +429,131 @@ static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 }
 
 static int omap_hsmmc_done;
+
+void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
+{
+	struct platform_device *pdev;
+	struct omap_mmc_platform_data *mmc_pdata;
+	int res;
+
+	if (omap_hsmmc_done != 1)
+		return;
+
+	omap_hsmmc_done++;
+
+	for (; c->mmc; c++) {
+		if (!c->deferred)
+			continue;
+
+		pdev = c->pdev;
+		if (!pdev)
+			continue;
+
+		mmc_pdata = pdev->dev.platform_data;
+		if (!mmc_pdata)
+			continue;
+
+		mmc_pdata->slots[0].switch_pin = c->gpio_cd;
+		mmc_pdata->slots[0].gpio_wp = c->gpio_wp;
+
+		res = omap_device_register(pdev);
+		if (res)
+			pr_err("Could not late init MMC %s\n",
+			       c->name);
+	}
+}
+
 #define MAX_OMAP_MMC_HWMOD_NAME_LEN		16
 
-void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
+static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo,
+					int ctrl_nr)
 {
 	struct omap_hwmod *oh;
+	struct omap_hwmod *ohs[1];
+	struct omap_device *od;
 	struct platform_device *pdev;
 	char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN];
 	struct omap_mmc_platform_data *mmc_data;
 	struct omap_mmc_dev_attr *mmc_dev_attr;
 	char *name;
-	int l;
+	int res;
 
 	mmc_data = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
 	if (!mmc_data) {
 		pr_err("Cannot allocate memory for mmc device!\n");
-		goto done;
+		return;
 	}
 
-	if (omap_hsmmc_pdata_init(hsmmcinfo, mmc_data) < 0) {
-		pr_err("%s fails!\n", __func__);
-		goto done;
-	}
+	res = omap_hsmmc_pdata_init(hsmmcinfo, mmc_data);
+	if (res < 0)
+		goto free_mmc;
+
 	omap_hsmmc_mux(mmc_data, (ctrl_nr - 1));
 
 	name = "omap_hsmmc";
-
-	l = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN,
+	res = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN,
 		     "mmc%d", ctrl_nr);
-	WARN(l >= MAX_OMAP_MMC_HWMOD_NAME_LEN,
+	WARN(res >= MAX_OMAP_MMC_HWMOD_NAME_LEN,
 	     "String buffer overflow in MMC%d device setup\n", ctrl_nr);
+
 	oh = omap_hwmod_lookup(oh_name);
 	if (!oh) {
 		pr_err("Could not look up %s\n", oh_name);
-		kfree(mmc_data->slots[0].name);
-		goto done;
+		goto free_name;
 	}
-
+	ohs[0] = oh;
 	if (oh->dev_attr != NULL) {
 		mmc_dev_attr = oh->dev_attr;
 		mmc_data->controller_flags = mmc_dev_attr->flags;
 	}
 
-	pdev = omap_device_build(name, ctrl_nr - 1, oh, mmc_data,
-		sizeof(struct omap_mmc_platform_data), NULL, 0, false);
-	if (IS_ERR(pdev)) {
-		WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name);
-		kfree(mmc_data->slots[0].name);
-		goto done;
+	pdev = platform_device_alloc(name, ctrl_nr - 1);
+	if (!pdev) {
+		pr_err("Could not allocate pdev for %s\n", name);
+		goto free_name;
 	}
-	/*
-	 * return device handle to board setup code
-	 * required to populate for regulator framework structure
-	 */
-	hsmmcinfo->dev = &pdev->dev;
+	dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id);
+
+	od = omap_device_alloc(pdev, ohs, 1, NULL, 0);
+	if (!od) {
+		pr_err("Could not allocate od for %s\n", name);
+		goto put_pdev;
+	}
+
+	res = platform_device_add_data(pdev, mmc_data,
+			      sizeof(struct omap_mmc_platform_data));
+	if (res) {
+		pr_err("Could not add pdata for %s\n", name);
+		goto put_pdev;
+	}
+
+	hsmmcinfo->pdev = pdev;
+
+	if (hsmmcinfo->deferred)
+		goto free_mmc;
+
+	res = omap_device_register(pdev);
+	if (res) {
+		pr_err("Could not register od for %s\n", name);
+		goto free_od;
+	}
+
+	goto free_mmc;
+
+free_od:
+	omap_device_delete(od);
+
+put_pdev:
+	platform_device_put(pdev);
+
+free_name:
+	kfree(mmc_data->slots[0].name);
 
-done:
+free_mmc:
 	kfree(mmc_data);
 }
 
-void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
+void __init omap_hsmmc_init(struct omap2_hsmmc_info *controllers)
 {
 	u32 reg;
 
@@ -521,7 +586,7 @@ void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
 	}
 
 	for (; controllers->mmc; controllers++)
-		omap_init_hsmmc(controllers, controllers->mmc);
+		omap_hsmmc_init_one(controllers, controllers->mmc);
 
 }
 

arch/arm/mach-omap2/hsmmc.h

@@ -21,10 +21,11 @@ struct omap2_hsmmc_info {
 	bool	no_off;		/* power_saving and power is not to go off */
 	bool	no_off_init;	/* no power off when not in MMC sleep state */
 	bool	vcc_aux_disable_is_sleep; /* Regulator off remapped to sleep */
+	bool	deferred;	/* mmc needs a deferred probe */
 	int	gpio_cd;	/* or -EINVAL */
 	int	gpio_wp;	/* or -EINVAL */
 	char	*name;		/* or NULL for default */
-	struct device *dev;	/* returned: pointer to mmc adapter */
+	struct platform_device *pdev;	/* mmc controller instance */
 	int	ocr_mask;	/* temporary HACK */
 	/* Remux (pad configuration) when powering on/off */
 	void (*remux)(struct device *dev, int slot, int power_on);
@@ -34,11 +35,16 @@ struct omap2_hsmmc_info {
 
 #if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
 
-void omap2_hsmmc_init(struct omap2_hsmmc_info *);
+void omap_hsmmc_init(struct omap2_hsmmc_info *);
+void omap_hsmmc_late_init(struct omap2_hsmmc_info *);
 
 #else
 
-static inline void omap2_hsmmc_init(struct omap2_hsmmc_info *info)
+static inline void omap_hsmmc_init(struct omap2_hsmmc_info *info)
+{
+}
+
+static inline void omap_hsmmc_late_init(struct omap2_hsmmc_info *info)
 {
 }
 

arch/arm/mach-omap2/id.c

@@ -44,6 +44,8 @@ int omap_type(void)
 
 	if (cpu_is_omap24xx()) {
 		val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
+	} else if (cpu_is_am33xx()) {
+		val = omap_ctrl_readl(AM33XX_CONTROL_STATUS);
 	} else if (cpu_is_omap34xx()) {
 		val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
 	} else if (cpu_is_omap44xx()) {
@@ -343,6 +345,7 @@ static void __init omap3_check_revision(const char **cpu_rev)
 	case 0xb944:
 		omap_revision = AM335X_REV_ES1_0;
 		*cpu_rev = "1.0";
+		break;
 	case 0xb8f2:
 		switch (rev) {
 		case 0:

arch/arm/mach-omap2/io.c

@@ -43,14 +43,13 @@
 #include "clockdomain.h"
 #include <plat/omap_hwmod.h>
 #include <plat/multi.h>
-#include "common.h"
 
 /*
  * The machine specific code may provide the extra mapping besides the
  * default mapping provided here.
  */
 
-#ifdef CONFIG_ARCH_OMAP2
+#if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430)
 static struct map_desc omap24xx_io_desc[] __initdata = {
 	{
 		.virtual	= L3_24XX_VIRT,

arch/arm/mach-omap2/mailbox.c

@@ -420,8 +420,7 @@ static void __exit omap2_mbox_exit(void)
 	platform_driver_unregister(&omap2_mbox_driver);
 }
 
-/* must be ready before omap3isp is probed */
-subsys_initcall(omap2_mbox_init);
+module_init(omap2_mbox_init);
 module_exit(omap2_mbox_exit);
 
 MODULE_LICENSE("GPL v2");

arch/arm/mach-omap2/mcbsp.c

@@ -122,7 +122,7 @@ static int omap3_enable_st_clock(unsigned int id, bool enable)
 	return 0;
 }
 
-static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
+static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 {
 	int id, count = 1;
 	char *name = "omap-mcbsp";

arch/arm/mach-omap2/mux.c

@@ -100,8 +100,8 @@ void omap_mux_write_array(struct omap_mux_partition *partition,
 
 static char *omap_mux_options;
 
-static int _omap_mux_init_gpio(struct omap_mux_partition *partition,
-			       int gpio, int val)
+static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition,
+				      int gpio, int val)
 {
 	struct omap_mux_entry *e;
 	struct omap_mux *gpio_mux = NULL;
@@ -145,7 +145,7 @@ static int _omap_mux_init_gpio(struct omap_mux_partition *partition,
 	return 0;
 }
 
-int omap_mux_init_gpio(int gpio, int val)
+int __init omap_mux_init_gpio(int gpio, int val)
 {
 	struct omap_mux_partition *partition;
 	int ret;
@@ -159,9 +159,9 @@ int omap_mux_init_gpio(int gpio, int val)
 	return -ENODEV;
 }
 
-static int _omap_mux_get_by_name(struct omap_mux_partition *partition,
-				 const char *muxname,
-				 struct omap_mux **found_mux)
+static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition,
+					const char *muxname,
+					struct omap_mux **found_mux)
 {
 	struct omap_mux *mux = NULL;
 	struct omap_mux_entry *e;
@@ -218,7 +218,7 @@ static int _omap_mux_get_by_name(struct omap_mux_partition *partition,
 	return -ENODEV;
 }
 
-static int
+static int __init
 omap_mux_get_by_name(const char *muxname,
 			struct omap_mux_partition **found_partition,
 			struct omap_mux **found_mux)
@@ -240,7 +240,7 @@ omap_mux_get_by_name(const char *muxname,
 	return -ENODEV;
 }
 
-int omap_mux_init_signal(const char *muxname, int val)
+int __init omap_mux_init_signal(const char *muxname, int val)
 {
 	struct omap_mux_partition *partition = NULL;
 	struct omap_mux *mux = NULL;

arch/arm/mach-omap2/omap-hotplug.c

@@ -33,7 +33,7 @@ int platform_cpu_kill(unsigned int cpu)
  * platform-specific code to shutdown a CPU
  * Called with IRQs disabled
  */
-void platform_cpu_die(unsigned int cpu)
+void __ref platform_cpu_die(unsigned int cpu)
 {
 	unsigned int this_cpu;
 

arch/arm/mach-omap2/omap-iommu.c

@@ -150,7 +150,8 @@ err_out:
 		platform_device_put(omap_iommu_pdev[i]);
 	return err;
 }
-module_init(omap_iommu_init);
+/* must be ready before omap3isp is probed */
+subsys_initcall(omap_iommu_init);
 
 static void __exit omap_iommu_exit(void)
 {

arch/arm/mach-omap2/omap-mpuss-lowpower.c

@@ -300,7 +300,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
  * @cpu : CPU ID
  * @power_state: CPU low power state.
  */
-int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state)
+int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state)
 {
 	unsigned int cpu_state = 0;
 

arch/arm/mach-omap2/omap-wakeupgen.c

@@ -43,7 +43,6 @@
 
 static void __iomem *wakeupgen_base;
 static void __iomem *sar_base;
-static DEFINE_PER_CPU(u32 [NR_REG_BANKS], irqmasks);
 static DEFINE_SPINLOCK(wakeupgen_lock);
 static unsigned int irq_target_cpu[NR_IRQS];
 
@@ -67,14 +66,6 @@ static inline void sar_writel(u32 val, u32 offset, u8 idx)
 	__raw_writel(val, sar_base + offset + (idx * 4));
 }
 
-static void _wakeupgen_set_all(unsigned int cpu, unsigned int reg)
-{
-	u8 i;
-
-	for (i = 0; i < NR_REG_BANKS; i++)
-		wakeupgen_writel(reg, i, cpu);
-}
-
 static inline int _wakeupgen_get_irq_info(u32 irq, u32 *bit_posn, u8 *reg_index)
 {
 	unsigned int spi_irq;
@@ -130,22 +121,6 @@ static void _wakeupgen_set(unsigned int irq, unsigned int cpu)
 	wakeupgen_writel(val, i, cpu);
 }
 
-static void _wakeupgen_save_masks(unsigned int cpu)
-{
-	u8 i;
-
-	for (i = 0; i < NR_REG_BANKS; i++)
-		per_cpu(irqmasks, cpu)[i] = wakeupgen_readl(i, cpu);
-}
-
-static void _wakeupgen_restore_masks(unsigned int cpu)
-{
-	u8 i;
-
-	for (i = 0; i < NR_REG_BANKS; i++)
-		wakeupgen_writel(per_cpu(irqmasks, cpu)[i], i, cpu);
-}
-
 /*
  * Architecture specific Mask extension
  */
@@ -170,6 +145,33 @@ static void wakeupgen_unmask(struct irq_data *d)
 	spin_unlock_irqrestore(&wakeupgen_lock, flags);
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
+static DEFINE_PER_CPU(u32 [NR_REG_BANKS], irqmasks);
+
+static void _wakeupgen_save_masks(unsigned int cpu)
+{
+	u8 i;
+
+	for (i = 0; i < NR_REG_BANKS; i++)
+		per_cpu(irqmasks, cpu)[i] = wakeupgen_readl(i, cpu);
+}
+
+static void _wakeupgen_restore_masks(unsigned int cpu)
+{
+	u8 i;
+
+	for (i = 0; i < NR_REG_BANKS; i++)
+		wakeupgen_writel(per_cpu(irqmasks, cpu)[i], i, cpu);
+}
+
+static void _wakeupgen_set_all(unsigned int cpu, unsigned int reg)
+{
+	u8 i;
+
+	for (i = 0; i < NR_REG_BANKS; i++)
+		wakeupgen_writel(reg, i, cpu);
+}
+
 /*
  * Mask or unmask all interrupts on given CPU.
  *	0 = Mask all interrupts on the 'cpu'
@@ -191,6 +193,7 @@ static void wakeupgen_irqmask_all(unsigned int cpu, unsigned int set)
 	}
 	spin_unlock_irqrestore(&wakeupgen_lock, flags);
 }
+#endif
 
 #ifdef CONFIG_CPU_PM
 /*

arch/arm/mach-omap2/omap4-common.c

@@ -31,6 +31,7 @@
 
 #include "common.h"
 #include "omap4-sar-layout.h"
+#include <linux/export.h>
 
 #ifdef CONFIG_CACHE_L2X0
 static void __iomem *l2cache_base;
@@ -55,6 +56,7 @@ void omap_bus_sync(void)
 		isb();
 	}
 }
+EXPORT_SYMBOL(omap_bus_sync);
 
 /* Steal one page physical memory for barrier implementation */
 int __init omap_barrier_reserve_memblock(void)

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -28,7 +28,6 @@
 #include <plat/mcspi.h>
 #include <plat/mcbsp.h>
 #include <plat/mmc.h>
-#include <plat/i2c.h>
 #include <plat/dmtimer.h>
 #include <plat/common.h>
 

arch/arm/mach-omap2/pm.c

@@ -28,7 +28,7 @@
 
 static struct omap_device_pm_latency *pm_lats;
 
-static int _init_omap_device(char *name)
+static int __init _init_omap_device(char *name)
 {
 	struct omap_hwmod *oh;
 	struct platform_device *pdev;
@@ -49,7 +49,7 @@ static int _init_omap_device(char *name)
 /*
  * Build omap_devices for processors and bus.
  */
-static void omap2_init_processor_devices(void)
+static void __init omap2_init_processor_devices(void)
 {
 	_init_omap_device("mpu");
 	if (omap3_has_iva())

arch/arm/mach-omap2/powerdomain-common.c

@@ -13,6 +13,7 @@
 
 #include <linux/errno.h>
 #include <linux/kernel.h>
+#include <linux/bug.h>
 #include "pm.h"
 #include "cm.h"
 #include "cm-regbits-34xx.h"

arch/arm/mach-omap2/powerdomain2xxx_3xxx.c

@@ -15,6 +15,7 @@
 #include <linux/io.h>
 #include <linux/errno.h>
 #include <linux/delay.h>
+#include <linux/bug.h>
 
 #include <plat/prcm.h>
 

arch/arm/mach-omap2/powerdomain44xx.c

@@ -15,6 +15,7 @@
 #include <linux/io.h>
 #include <linux/errno.h>
 #include <linux/delay.h>
+#include <linux/bug.h>
 
 #include "powerdomain.h"
 #include <plat/prcm.h>

arch/arm/mach-omap2/powerdomains3xxx_data.c

@@ -13,6 +13,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/bug.h>
 
 #include <plat/cpu.h>
 

arch/arm/mach-omap2/sr_device.c

@@ -69,7 +69,7 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
 	sr_data->nvalue_count = count;
 }
 
-static int sr_dev_init(struct omap_hwmod *oh, void *user)
+static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
 {
 	struct omap_sr_data *sr_data;
 	struct platform_device *pdev;

arch/arm/mach-omap2/twl-common.c

@@ -270,7 +270,6 @@ static struct regulator_init_data omap4_vusb_idata = {
 	.constraints = {
 		.min_uV			= 3300000,
 		.max_uV			= 3300000,
-		.apply_uV		= true,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE

arch/arm/mach-omap2/vc.c

@@ -10,6 +10,7 @@
 #include <linux/kernel.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/bug.h>
 
 #include <plat/cpu.h>
 

arch/arm/mach-omap2/vp.c

@@ -61,8 +61,8 @@ void __init omap_vp_init(struct voltagedomain *voltdm)
 	vddmin = voltdm->pmic->vp_vddmin;
 	vddmax = voltdm->pmic->vp_vddmax;
 
-	waittime = ((voltdm->pmic->step_size / voltdm->pmic->slew_rate) *
-		    sys_clk_rate) / 1000;
+	waittime = DIV_ROUND_UP(voltdm->pmic->step_size * sys_clk_rate,
+				1000 * voltdm->pmic->slew_rate);
 	vstepmin = voltdm->pmic->vp_vstepmin;
 	vstepmax = voltdm->pmic->vp_vstepmax;
 

arch/arm/mach-pxa/generic.h

@@ -49,7 +49,6 @@ extern unsigned pxa3xx_get_clk_frequency_khz(int);
 #endif
 
 extern struct syscore_ops pxa_irq_syscore_ops;
-extern struct syscore_ops pxa_gpio_syscore_ops;
 extern struct syscore_ops pxa2xx_mfp_syscore_ops;
 extern struct syscore_ops pxa3xx_mfp_syscore_ops;
 

arch/arm/mach-pxa/mfp-pxa2xx.c

@@ -226,6 +226,12 @@ static void __init pxa25x_mfp_init(void)
 {
 	int i;
 
+	/* running before pxa_gpio_probe() */
+#ifdef CONFIG_CPU_PXA26x
+	pxa_last_gpio = 89;
+#else
+	pxa_last_gpio = 84;
+#endif
 	for (i = 0; i <= pxa_last_gpio; i++)
 		gpio_desc[i].valid = 1;
 
@@ -295,6 +301,7 @@ static void __init pxa27x_mfp_init(void)
 {
 	int i, gpio;
 
+	pxa_last_gpio = 120;	/* running before pxa_gpio_probe() */
 	for (i = 0; i <= pxa_last_gpio; i++) {
 		/* skip GPIO2, 5, 6, 7, 8, they are not
 		 * valid pins allow configuration

arch/arm/mach-pxa/pxa25x.c

@@ -208,7 +208,7 @@ static struct clk_lookup pxa25x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
 	INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
 	INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
+	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
 };
 
 static struct clk_lookup pxa25x_hwuart_clkreg =
@@ -368,7 +368,6 @@ static int __init pxa25x_init(void)
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa2xx_clock_syscore_ops);
 
 		ret = platform_add_devices(pxa25x_devices,

arch/arm/mach-pxa/pxa27x.c

@@ -229,7 +229,7 @@ static struct clk_lookup pxa27x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
 	INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
 	INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
-	INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
+	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
 };
 
 #ifdef CONFIG_PM
@@ -456,7 +456,6 @@ static int __init pxa27x_init(void)
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa2xx_clock_syscore_ops);
 
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));

arch/arm/mach-pxa/pxa3xx.c

@@ -463,7 +463,6 @@ static int __init pxa3xx_init(void)
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
 		register_syscore_ops(&pxa3xx_mfp_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa3xx_clock_syscore_ops);
 
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));

arch/arm/mach-pxa/pxa95x.c

@@ -284,7 +284,6 @@ static int __init pxa95x_init(void)
 			return ret;
 
 		register_syscore_ops(&pxa_irq_syscore_ops);
-		register_syscore_ops(&pxa_gpio_syscore_ops);
 		register_syscore_ops(&pxa3xx_clock_syscore_ops);
 
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));

arch/arm/mach-s3c2440/common.h

@@ -12,6 +12,6 @@
 #ifndef __ARCH_ARM_MACH_S3C2440_COMMON_H
 #define __ARCH_ARM_MACH_S3C2440_COMMON_H
 
-void s3c2440_restart(char mode, const char *cmd);
+void s3c244x_restart(char mode, const char *cmd);
 
 #endif /* __ARCH_ARM_MACH_S3C2440_COMMON_H */

arch/arm/mach-s3c2440/mach-anubis.c

@@ -487,5 +487,5 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
 	.init_machine	= anubis_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/mach-at2440evb.c

@@ -222,5 +222,5 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
 	.init_machine	= at2440evb_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/mach-gta02.c

@@ -601,5 +601,5 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= gta02_machine_init,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/mach-mini2440.c

@@ -701,5 +701,5 @@ MACHINE_START(MINI2440, "MINI2440")
 	.init_machine	= mini2440_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/mach-nexcoder.c

@@ -158,5 +158,5 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
 	.init_machine	= nexcoder_init,
 	.init_irq	= s3c24xx_init_irq,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END

arch/arm/mach-s3c2440/mach-osiris.c

@@ -436,5 +436,5 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= osiris_init,
 	.timer		= &s3c24xx_timer,
-	.restart	= s3c2440_restart,
+	.restart	= s3c244x_restart,
 MACHINE_END