[ARM] 3302/1: make pci=firmware the default for ixp2000

Patch from Lennert Buytenhek

Most ixp2000 boards don't actually work if pci=firmware isn't used, so
the defconfig isn't really the right place to specify this.  Instead of
specifying it in the defconfigs, make the relevant board code take care
of setting pci=firmware.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/configs/enp2611_defconfig

@@ -171,7 +171,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware"
+CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0"
 # CONFIG_XIP_KERNEL is not set
 
 #

arch/arm/configs/ixdp2400_defconfig

@@ -172,7 +172,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware"
+CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0"
 # CONFIG_XIP_KERNEL is not set
 
 #

arch/arm/configs/ixdp2401_defconfig

@@ -172,7 +172,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware"
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0"
 # CONFIG_XIP_KERNEL is not set
 
 #

arch/arm/configs/ixdp2801_defconfig

@@ -172,7 +172,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware"
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0"
 # CONFIG_XIP_KERNEL is not set
 
 #

arch/arm/mach-ixp2000/enp2611.c

@@ -106,6 +106,7 @@ static void __init enp2611_pci_preinit(void)
 {
 	ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000);
 	ixp2000_pci_preinit();
+	pcibios_setup("firmware");
 }
 
 static inline int enp2611_pci_valid_device(struct pci_bus *bus,

arch/arm/mach-ixp2000/ixdp2400.c

@@ -68,6 +68,7 @@ void __init ixdp2400_pci_preinit(void)
 {
 	ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000);
 	ixp2000_pci_preinit();
+	pcibios_setup("firmware");
 }
 
 int ixdp2400_pci_setup(int nr, struct pci_sys_data *sys)

arch/arm/mach-ixp2000/ixdp2x01.c

@@ -212,6 +212,7 @@ void __init ixdp2x01_pci_preinit(void)
 {
 	ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00000000);
 	ixp2000_pci_preinit();
+	pcibios_setup("firmware");
 }
 
 #define DEVPIN(dev, pin) ((pin) | ((dev) << 3))