ARM: Kirkwood: Convert dnskw to pinctrl

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

arch/arm/boot/dts/kirkwood-dnskw.dtsi

@@ -1,4 +1,5 @@
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
 	model = "D-Link DNS NASes (kirkwood-based)";
@@ -41,6 +42,110 @@
 	};
 
 	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_nand &pmx_uart1
+				      &pmx_sata0 &pmx_sata1
+				      &pmx_led_power
+				      &pmx_led_red_right_hdd
+				      &pmx_led_red_left_hdd
+				      &pmx_led_red_usb_325
+				      &pmx_button_power
+				      &pmx_led_red_usb_320
+				      &pmx_power_off &pmx_power_back_on
+				      &pmx_power_sata0 &pmx_power_sata1
+				      &pmx_present_sata0 &pmx_present_sata1
+				      &pmx_led_white_usb &pmx_fan_tacho
+				      &pmx_fan_high_speed &pmx_fan_low_speed
+				      &pmx_button_unmount &pmx_button_reset
+				      &pmx_temp_alarm >;
+			pinctrl-names = "default";
+
+			pmx_sata0: pmx-sata0 {
+				marvell,pins = "mpp20";
+				marvell,function = "sata1";
+			};
+			pmx_sata1: pmx-sata1 {
+				marvell,pins = "mpp21";
+				marvell,function = "sata0";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp26";
+				marvell,function = "gpio";
+			};
+			pmx_led_red_right_hdd: pmx-led-red-right-hdd {
+				marvell,pins = "mpp27";
+				marvell,function = "gpio";
+			};
+			pmx_led_red_left_hdd: pmx-led-red-left-hdd {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+			pmx_led_red_usb_325: pmx-led-red-usb-325 {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_button_power: pmx-button-power {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+			pmx_led_red_usb_320: pmx-led-red-usb-320 {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+			pmx_power_off: pmx-power-off {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_power_back_on: pmx-power-back-on {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_power_sata0: pmx-power-sata0 {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_power_sata1: pmx-power-sata1 {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_present_sata0: pmx-present-sata0 {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_present_sata1: pmx-present-sata1 {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_led_white_usb: pmx-led-white-usb {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_fan_tacho: pmx-fan-tacho {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_fan_high_speed: pmx-fan-high-speed {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_fan_low_speed: pmx-fan-low-speed {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_button_unmount: pmx-button-unmount {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_button_reset: pmx-button-reset {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+			pmx_temp_alarm: pmx-temp-alarm {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+		};
 		sata@80000 {
 			status = "okay";
 			nr-ports = <2>;

arch/arm/mach-kirkwood/board-dnskw.c

@@ -17,46 +17,11 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/gpio.h>
 #include "common.h"
-#include "mpp.h"
 
 static struct mv643xx_eth_platform_data dnskw_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
-static unsigned int dnskw_mpp_config[] __initdata = {
-	MPP13_UART1_TXD,	/* Custom ... */
-	MPP14_UART1_RXD,	/* ... Controller (DNS-320 only) */
-	MPP20_SATA1_ACTn,	/* LED: White Right HDD */
-	MPP21_SATA0_ACTn,	/* LED: White Left HDD */
-	MPP24_GPIO,
-	MPP25_GPIO,
-	MPP26_GPIO,	/* LED: Power */
-	MPP27_GPIO,	/* LED: Red Right HDD */
-	MPP28_GPIO,	/* LED: Red Left HDD */
-	MPP29_GPIO,	/* LED: Red USB (DNS-325 only) */
-	MPP30_GPIO,
-	MPP31_GPIO,
-	MPP32_GPIO,
-	MPP33_GPO,
-	MPP34_GPIO,	/* Button: Front power */
-	MPP35_GPIO,	/* LED: Red USB (DNS-320 only) */
-	MPP36_GPIO,	/* Power: Turn off board */
-	MPP37_GPIO,	/* Power: Turn back on after power failure */
-	MPP38_GPIO,
-	MPP39_GPIO,	/* Power: SATA0 */
-	MPP40_GPIO,	/* Power: SATA1 */
-	MPP41_GPIO,	/* SATA0 present */
-	MPP42_GPIO,	/* SATA1 present */
-	MPP43_GPIO,	/* LED: White USB */
-	MPP44_GPIO,	/* Fan: Tachometer Pin */
-	MPP45_GPIO,	/* Fan: high speed */
-	MPP46_GPIO,	/* Fan: low speed */
-	MPP47_GPIO,	/* Button: Back unmount */
-	MPP48_GPIO,	/* Button: Back reset */
-	MPP49_GPIO,	/* Temp Alarm (DNS-325) Pin of U5 (DNS-320) */
-	0
-};
-
 /* Register any GPIO for output and set the value */
 static void __init dnskw_gpio_register(unsigned gpio, char *name, int def)
 {
@@ -71,8 +36,6 @@ static void __init dnskw_gpio_register(unsigned gpio, char *name, int def)
 
 void __init dnskw_init(void)
 {
-	kirkwood_mpp_conf(dnskw_mpp_config);
-
 	kirkwood_ge00_init(&dnskw_ge00_data);
 
 	/* Set NAS to turn back on after a power failure */