V4L/DVB (5217): Zl10353: Implement TRL nominal rate calculation

Implement trl nominal rate calculation to Zarlink ZL10353 demod,
based on calculation used in Zarlink MT352.
This adds support for 6 and 8MHz bandwidth transponders.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/dvb/frontends/zl10353.c

@@ -38,6 +38,12 @@ struct zl10353_state {
 	struct zl10353_config config;
 };
 
+static int debug;
+#define dprintk(args...) \
+	do { \
+		if (debug) printk(KERN_DEBUG "zl10353: " args); \
+	} while (0)
+
 static int debug_regs = 0;
 
 static int zl10353_single_write(struct dvb_frontend *fe, u8 reg, u8 val)
@@ -113,6 +119,36 @@ static void zl10353_dump_regs(struct dvb_frontend *fe)
 	printk(KERN_DEBUG "%s\n", buf);
 }
 
+static void zl10353_calc_nominal_rate(struct dvb_frontend *fe,
+				      enum fe_bandwidth bandwidth,
+				      u16 *nominal_rate)
+{
+	u32 adc_clock = 22528; /* 20.480 MHz on the board(!?) */
+	u8 bw;
+	struct zl10353_state *state = fe->demodulator_priv;
+
+	if (state->config.adc_clock)
+		adc_clock = state->config.adc_clock;
+
+	switch (bandwidth) {
+	case BANDWIDTH_6_MHZ:
+		bw = 6;
+		break;
+	case BANDWIDTH_7_MHZ:
+		bw = 7;
+		break;
+	case BANDWIDTH_8_MHZ:
+	default:
+		bw = 8;
+		break;
+	}
+
+	*nominal_rate = (64 * bw * (1<<16) / (7 * 8) * 4000 / adc_clock + 2) / 4;
+
+	dprintk("%s: bw %d, adc_clock %d => 0x%x\n",
+		__FUNCTION__, bw, adc_clock, *nominal_rate);
+}
+
 static int zl10353_sleep(struct dvb_frontend *fe)
 {
 	static u8 zl10353_softdown[] = { 0x50, 0x0C, 0x44 };
@@ -125,7 +161,7 @@ static int zl10353_set_parameters(struct dvb_frontend *fe,
 				  struct dvb_frontend_parameters *param)
 {
 	struct zl10353_state *state = fe->demodulator_priv;
-
+	u16 nominal_rate;
 	u8 pllbuf[6] = { 0x67 };
 
 	/* These settings set "auto-everything" and start the FSM. */
@@ -138,8 +174,11 @@ static int zl10353_set_parameters(struct dvb_frontend *fe,
 	zl10353_single_write(fe, 0x56, 0x28);
 	zl10353_single_write(fe, 0x89, 0x20);
 	zl10353_single_write(fe, 0x5E, 0x00);
-	zl10353_single_write(fe, 0x65, 0x5A);
-	zl10353_single_write(fe, 0x66, 0xE9);
+
+	zl10353_calc_nominal_rate(fe, param->u.ofdm.bandwidth, &nominal_rate);
+	zl10353_single_write(fe, TRL_NOMINAL_RATE_1, msb(nominal_rate));
+	zl10353_single_write(fe, TRL_NOMINAL_RATE_0, lsb(nominal_rate));
+
 	zl10353_single_write(fe, 0x6C, 0xCD);
 	zl10353_single_write(fe, 0x6D, 0x7E);
 	if (fe->ops.i2c_gate_ctrl)
@@ -377,6 +416,9 @@ static struct dvb_frontend_ops zl10353_ops = {
 	.read_ucblocks = zl10353_read_ucblocks,
 };
 
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
+
 module_param(debug_regs, int, 0644);
 MODULE_PARM_DESC(debug_regs, "Turn on/off frontend register dumps (default:off).");
 

drivers/media/dvb/frontends/zl10353.h

@@ -29,6 +29,9 @@ struct zl10353_config
 	/* demodulator's I2C address */
 	u8 demod_address;
 
+	/* frequencies in kHz */
+	int adc_clock;  // default: 22528
+
 	/* set if no pll is connected to the secondary i2c bus */
 	int no_tuner;
 

drivers/media/dvb/frontends/zl10353_priv.h

@@ -24,19 +24,24 @@
 
 #define ID_ZL10353	0x14
 
+#define msb(x) (((x) >> 8) & 0xff)
+#define lsb(x) ((x) & 0xff)
+
 enum zl10353_reg_addr {
-	INTERRUPT_0	= 0x00,
-	INTERRUPT_1	= 0x01,
-	INTERRUPT_2	= 0x02,
-	INTERRUPT_3	= 0x03,
-	INTERRUPT_4	= 0x04,
-	INTERRUPT_5	= 0x05,
-	STATUS_6	= 0x06,
-	STATUS_7	= 0x07,
-	STATUS_8	= 0x08,
-	STATUS_9	= 0x09,
-	SNR		= 0x10,
-	CHIP_ID		= 0x7F,
+	INTERRUPT_0        = 0x00,
+	INTERRUPT_1        = 0x01,
+	INTERRUPT_2        = 0x02,
+	INTERRUPT_3        = 0x03,
+	INTERRUPT_4        = 0x04,
+	INTERRUPT_5        = 0x05,
+	STATUS_6           = 0x06,
+	STATUS_7           = 0x07,
+	STATUS_8           = 0x08,
+	STATUS_9           = 0x09,
+	SNR                = 0x10,
+	TRL_NOMINAL_RATE_1 = 0x65,
+	TRL_NOMINAL_RATE_0 = 0x66,
+	CHIP_ID            = 0x7F,
 };
 
 #endif                          /* _ZL10353_PRIV_ */