Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
	drivers/net/vmxnet3/vmxnet3_drv.c

Small vmxnet3 conflict with header size bug fix in 'net'.

Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/kernel-parameters.txt

@@ -2211,6 +2211,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 			default: off.
 
+	printk.always_kmsg_dump=
+			Trigger kmsg_dump for cases other than kernel oops or
+			panics
+			Format: <bool>  (1/Y/y=enable, 0/N/n=disable)
+			default: disabled
+
 	printk.time=	Show timing data prefixed to each printk message line
 			Format: <bool>  (1/Y/y=enable, 0/N/n=disable)
 

MAINTAINERS

@@ -1310,7 +1310,7 @@ F:	drivers/atm/
 F:	include/linux/atm*
 
 ATMEL AT91 MCI DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@atmel.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.atmel.com/products/AT91/
 W:	http://www.at91.com/
@@ -1318,7 +1318,7 @@ S:	Maintained
 F:	drivers/mmc/host/at91_mci.c
 
 ATMEL AT91 / AT32 MCI DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+M:	Ludovic Desroches <ludovic.desroches@atmel.com>
 S:	Maintained
 F:	drivers/mmc/host/atmel-mci.c
 F:	drivers/mmc/host/atmel-mci-regs.h
@@ -3781,7 +3781,7 @@ F:	Documentation/kdump/
 
 KERNEL AUTOMOUNTER v4 (AUTOFS4)
 M:	Ian Kent <raven@themaw.net>
-L:	autofs@linux.kernel.org
+L:	autofs@vger.kernel.org
 S:	Maintained
 F:	fs/autofs4/
 
@@ -4686,7 +4686,7 @@ NTFS FILESYSTEM
 M:	Anton Altaparmakov <anton@tuxera.com>
 L:	linux-ntfs-dev@lists.sourceforge.net
 W:	http://www.tuxera.com/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs.git
 S:	Supported
 F:	Documentation/filesystems/ntfs.txt
 F:	fs/ntfs/
@@ -7270,7 +7270,7 @@ WATCHDOG DEVICE DRIVERS
 M:	Wim Van Sebroeck <wim@iguana.be>
 L:	linux-watchdog@vger.kernel.org
 W:	http://www.linux-watchdog.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git
+T:	git git://www.linux-watchdog.org/linux-watchdog.git
 S:	Maintained
 F:	Documentation/watchdog/
 F:	drivers/watchdog/

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 3
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/alpha/include/asm/futex.h

@@ -108,7 +108,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 	"	lda	$31,3b-2b(%0)\n"
 	"	.previous\n"
 	:	"+r"(ret), "=&r"(prev), "=&r"(cmp)
-	:	"r"(uaddr), "r"((long)oldval), "r"(newval)
+	:	"r"(uaddr), "r"((long)(int)oldval), "r"(newval)
 	:	"memory");
 
 	*uval = prev;

arch/arm/mach-lpc32xx/include/mach/irqs.h

@@ -61,7 +61,7 @@
  */
 #define IRQ_LPC32XX_JTAG_COMM_TX	LPC32XX_SIC1_IRQ(1)
 #define IRQ_LPC32XX_JTAG_COMM_RX	LPC32XX_SIC1_IRQ(2)
-#define IRQ_LPC32XX_GPI_11		LPC32XX_SIC1_IRQ(4)
+#define IRQ_LPC32XX_GPI_28		LPC32XX_SIC1_IRQ(4)
 #define IRQ_LPC32XX_TS_P		LPC32XX_SIC1_IRQ(6)
 #define IRQ_LPC32XX_TS_IRQ		LPC32XX_SIC1_IRQ(7)
 #define IRQ_LPC32XX_TS_AUX		LPC32XX_SIC1_IRQ(8)

arch/arm/mach-lpc32xx/irq.c

@@ -118,6 +118,10 @@ static const struct lpc32xx_event_info lpc32xx_events[NR_IRQS] = {
 		.event_group = &lpc32xx_event_pin_regs,
 		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_06_BIT,
 	},
+	[IRQ_LPC32XX_GPI_28] = {
+		.event_group = &lpc32xx_event_pin_regs,
+		.mask = LPC32XX_CLKPWR_EXTSRC_GPI_28_BIT,
+	},
 	[IRQ_LPC32XX_GPIO_00] = {
 		.event_group = &lpc32xx_event_int_regs,
 		.mask = LPC32XX_CLKPWR_INTSRC_GPIO_00_BIT,
@@ -305,9 +309,18 @@ static int lpc32xx_irq_wake(struct irq_data *d, unsigned int state)
 
 		if (state)
 			eventreg |= lpc32xx_events[d->irq].mask;
-		else
+		else {
 			eventreg &= ~lpc32xx_events[d->irq].mask;
 
+			/*
+			 * When disabling the wakeup, clear the latched
+			 * event
+			 */
+			__raw_writel(lpc32xx_events[d->irq].mask,
+				lpc32xx_events[d->irq].
+				event_group->rawstat_reg);
+		}
+
 		__raw_writel(eventreg,
 			lpc32xx_events[d->irq].event_group->enab_reg);
 
@@ -380,13 +393,15 @@ void __init lpc32xx_init_irq(void)
 
 	/* Setup SIC1 */
 	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC1_BASE));
-	__raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE));
-	__raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE));
+	__raw_writel(SIC1_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC1_BASE));
+	__raw_writel(SIC1_ATR_DEFAULT,
+				LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC1_BASE));
 
 	/* Setup SIC2 */
 	__raw_writel(0, LPC32XX_INTC_MASK(LPC32XX_SIC2_BASE));
-	__raw_writel(MIC_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE));
-	__raw_writel(MIC_ATR_DEFAULT, LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE));
+	__raw_writel(SIC2_APR_DEFAULT, LPC32XX_INTC_POLAR(LPC32XX_SIC2_BASE));
+	__raw_writel(SIC2_ATR_DEFAULT,
+				LPC32XX_INTC_ACT_TYPE(LPC32XX_SIC2_BASE));
 
 	/* Configure supported IRQ's */
 	for (i = 0; i < NR_IRQS; i++) {

arch/arm/mach-lpc32xx/serial.c

@@ -88,6 +88,7 @@ struct uartinit {
 	char *uart_ck_name;
 	u32 ck_mode_mask;
 	void __iomem *pdiv_clk_reg;
+	resource_size_t mapbase;
 };
 
 static struct uartinit uartinit_data[] __initdata = {
@@ -97,6 +98,7 @@ static struct uartinit uartinit_data[] __initdata = {
 		.ck_mode_mask =
 			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 5),
 		.pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL,
+		.mapbase = LPC32XX_UART5_BASE,
 	},
 #endif
 #ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
@@ -105,6 +107,7 @@ static struct uartinit uartinit_data[] __initdata = {
 		.ck_mode_mask =
 			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 3),
 		.pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL,
+		.mapbase = LPC32XX_UART3_BASE,
 	},
 #endif
 #ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
@@ -113,6 +116,7 @@ static struct uartinit uartinit_data[] __initdata = {
 		.ck_mode_mask =
 			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 4),
 		.pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL,
+		.mapbase = LPC32XX_UART4_BASE,
 	},
 #endif
 #ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
@@ -121,6 +125,7 @@ static struct uartinit uartinit_data[] __initdata = {
 		.ck_mode_mask =
 			LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 6),
 		.pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL,
+		.mapbase = LPC32XX_UART6_BASE,
 	},
 #endif
 };
@@ -165,11 +170,24 @@ void __init lpc32xx_serial_init(void)
 
 		/* pre-UART clock divider set to 1 */
 		__raw_writel(0x0101, uartinit_data[i].pdiv_clk_reg);
+
+		/*
+		 * Force a flush of the RX FIFOs to work around a
+		 * HW bug
+		 */
+		puart = uartinit_data[i].mapbase;
+		__raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));
+		__raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart));
+		j = LPC32XX_SUART_FIFO_SIZE;
+		while (j--)
+			tmp = __raw_readl(
+				LPC32XX_UART_DLL_FIFO(puart));
+		__raw_writel(0, LPC32XX_UART_IIR_FCR(puart));
 	}
 
 	/* This needs to be done after all UART clocks are setup */
 	__raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE);
-	for (i = 0; i < ARRAY_SIZE(uartinit_data) - 1; i++) {
+	for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) {
 		/* Force a flush of the RX FIFOs to work around a HW bug */
 		puart = serial_std_platform_data[i].mapbase;
 		__raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));

arch/arm/mach-mmp/aspenite.c

@@ -17,7 +17,6 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/interrupt.h>
-#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

arch/arm/mach-mmp/pxa168.c

@@ -24,7 +24,6 @@
 #include <mach/dma.h>
 #include <mach/devices.h>
 #include <mach/mfp.h>
-#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <mach/pxa168.h>
 

arch/arm/mach-mmp/tavorevb.c

@@ -12,7 +12,6 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/smc91x.h>
-#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

arch/arm/mach-omap1/board-innovator.c

@@ -416,13 +416,13 @@ static void __init innovator_init(void)
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		omap1_usb_init(&innovator1510_usb_config);
-		innovator_config[1].data = &innovator1510_lcd_config;
+		innovator_config[0].data = &innovator1510_lcd_config;
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP16XX
 	if (cpu_is_omap1610()) {
 		omap1_usb_init(&h2_usb_config);
-		innovator_config[1].data = &innovator1610_lcd_config;
+		innovator_config[0].data = &innovator1610_lcd_config;
 	}
 #endif
 	omap_board_config = innovator_config;

arch/arm/mach-omap2/Kconfig

@@ -364,8 +364,8 @@ config OMAP3_SDRC_AC_TIMING
 	  going on could result in system crashes;
 
 config OMAP4_ERRATA_I688
-	bool "OMAP4 errata: Async Bridge Corruption (BROKEN)"
-	depends on ARCH_OMAP4 && BROKEN
+	bool "OMAP4 errata: Async Bridge Corruption"
+	depends on ARCH_OMAP4
 	select ARCH_HAS_BARRIERS
 	help
 	  If a data is stalled inside asynchronous bridge because of back

arch/arm/mach-omap2/board-n8x0.c

@@ -371,7 +371,11 @@ static void n8x0_mmc_callback(void *data, u8 card_mask)
 	else
 		*openp = 0;
 
+#ifdef CONFIG_MMC_OMAP
 	omap_mmc_notify_cover_event(mmc_device, index, *openp);
+#else
+	pr_warn("MMC: notify cover event not available\n");
+#endif
 }
 
 static int n8x0_mmc_late_init(struct device *dev)

arch/arm/mach-omap2/board-omap3evm.c

@@ -381,7 +381,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
 	gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI");
 
 	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
-	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+	gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1;
 
 	platform_device_register(&leds_gpio);
 

arch/arm/mach-omap2/common.h

@@ -132,6 +132,7 @@ void omap3_map_io(void);
 void am33xx_map_io(void);
 void omap4_map_io(void);
 void ti81xx_map_io(void);
+void omap_barriers_init(void);
 
 /**
  * omap_test_timeout - busy-loop, testing a condition

arch/arm/mach-omap2/cpuidle44xx.c

@@ -65,7 +65,6 @@ static int omap4_enter_idle(struct cpuidle_device *dev,
 	struct timespec ts_preidle, ts_postidle, ts_idle;
 	u32 cpu1_state;
 	int idle_time;
-	int new_state_idx;
 	int cpu_id = smp_processor_id();
 
 	/* Used to keep track of the total time in idle */
@@ -84,8 +83,8 @@ static int omap4_enter_idle(struct cpuidle_device *dev,
 	 */
 	cpu1_state = pwrdm_read_pwrst(cpu1_pd);
 	if (cpu1_state != PWRDM_POWER_OFF) {
-		new_state_idx = drv->safe_state_index;
-		cx = cpuidle_get_statedata(&dev->states_usage[new_state_idx]);
+		index = drv->safe_state_index;
+		cx = cpuidle_get_statedata(&dev->states_usage[index]);
 	}
 
 	if (index > 0)

arch/arm/mach-omap2/gpmc-smsc911x.c

@@ -19,6 +19,8 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/smsc911x.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
 
 #include <plat/board.h>
 #include <plat/gpmc.h>
@@ -42,6 +44,50 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = {
 	.flags		= SMSC911X_USE_16BIT,
 };
 
+static struct regulator_consumer_supply gpmc_smsc911x_supply[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
+/* Generic regulator definition to satisfy smsc911x */
+static struct regulator_init_data gpmc_smsc911x_reg_init_data = {
+	.constraints = {
+		.min_uV			= 3300000,
+		.max_uV			= 3300000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(gpmc_smsc911x_supply),
+	.consumer_supplies	= gpmc_smsc911x_supply,
+};
+
+static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = {
+	.supply_name		= "gpmc_smsc911x",
+	.microvolts		= 3300000,
+	.gpio			= -EINVAL,
+	.startup_delay		= 0,
+	.enable_high		= 0,
+	.enabled_at_boot	= 1,
+	.init_data		= &gpmc_smsc911x_reg_init_data,
+};
+
+/*
+ * Platform device id of 42 is a temporary fix to avoid conflicts
+ * with other reg-fixed-voltage devices. The real fix should
+ * involve the driver core providing a way of dynamically
+ * assigning a unique id on registration for platform devices
+ * in the same name space.
+ */
+static struct platform_device gpmc_smsc911x_regulator = {
+	.name		= "reg-fixed-voltage",
+	.id		= 42,
+	.dev = {
+		.platform_data	= &gpmc_smsc911x_fixed_reg_data,
+	},
+};
+
 /*
  * Initialize smsc911x device connected to the GPMC. Note that we
  * assume that pin multiplexing is done in the board-*.c file,
@@ -55,6 +101,12 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
 
 	gpmc_cfg = board_data;
 
+	ret = platform_device_register(&gpmc_smsc911x_regulator);
+	if (ret < 0) {
+		pr_err("Unable to register smsc911x regulators: %d\n", ret);
+		return;
+	}
+
 	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
 		pr_err("Failed to request GPMC mem region\n");
 		return;

arch/arm/mach-omap2/hsmmc.c

@@ -428,6 +428,7 @@ static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 	return 0;
 }
 
+static int omap_hsmmc_done;
 #define MAX_OMAP_MMC_HWMOD_NAME_LEN		16
 
 void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
@@ -491,6 +492,11 @@ void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
 {
 	u32 reg;
 
+	if (omap_hsmmc_done)
+		return;
+
+	omap_hsmmc_done = 1;
+
 	if (!cpu_is_omap44xx()) {
 		if (cpu_is_omap2430()) {
 			control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;

arch/arm/mach-omap2/io.c

@@ -307,6 +307,7 @@ void __init omapam33xx_map_common_io(void)
 void __init omap44xx_map_common_io(void)
 {
 	iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
+	omap_barriers_init();
 }
 #endif
 

arch/arm/mach-omap2/mailbox.c

@@ -281,8 +281,16 @@ static struct omap_mbox mbox_iva_info = {
 	.ops	= &omap2_mbox_ops,
 	.priv	= &omap2_mbox_iva_priv,
 };
+#endif
 
-struct omap_mbox *omap2_mboxes[] = { &mbox_dsp_info, &mbox_iva_info, NULL };
+#ifdef CONFIG_ARCH_OMAP2
+struct omap_mbox *omap2_mboxes[] = {
+	&mbox_dsp_info,
+#ifdef CONFIG_SOC_OMAP2420
+	&mbox_iva_info,
+#endif
+	NULL
+};
 #endif
 
 #if defined(CONFIG_ARCH_OMAP4)
@@ -412,7 +420,8 @@ static void __exit omap2_mbox_exit(void)
 	platform_driver_unregister(&omap2_mbox_driver);
 }
 
-module_init(omap2_mbox_init);
+/* must be ready before omap3isp is probed */
+subsys_initcall(omap2_mbox_init);
 module_exit(omap2_mbox_exit);
 
 MODULE_LICENSE("GPL v2");

arch/arm/mach-omap2/mux.c

@@ -218,7 +218,7 @@ static int _omap_mux_get_by_name(struct omap_mux_partition *partition,
 	return -ENODEV;
 }
 
-static int __init
+static int
 omap_mux_get_by_name(const char *muxname,
 			struct omap_mux_partition **found_partition,
 			struct omap_mux **found_mux)

arch/arm/mach-omap2/omap4-common.c

@@ -24,6 +24,7 @@
 
 #include <plat/irqs.h>
 #include <plat/sram.h>
+#include <plat/omap-secure.h>
 
 #include <mach/hardware.h>
 #include <mach/omap-wakeupgen.h>
@@ -43,6 +44,9 @@ static void __iomem *sar_ram_base;
 
 void __iomem *dram_sync, *sram_sync;
 
+static phys_addr_t paddr;
+static u32 size;
+
 void omap_bus_sync(void)
 {
 	if (dram_sync && sram_sync) {
@@ -52,18 +56,20 @@ void omap_bus_sync(void)
 	}
 }
 
-static int __init omap_barriers_init(void)
+/* Steal one page physical memory for barrier implementation */
+int __init omap_barrier_reserve_memblock(void)
 {
-	struct map_desc dram_io_desc[1];
-	phys_addr_t paddr;
-	u32 size;
-
-	if (!cpu_is_omap44xx())
-		return -ENODEV;
 
 	size = ALIGN(PAGE_SIZE, SZ_1M);
 	paddr = arm_memblock_steal(size, SZ_1M);
 
+	return 0;
+}
+
+void __init omap_barriers_init(void)
+{
+	struct map_desc dram_io_desc[1];
+
 	dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA;
 	dram_io_desc[0].pfn = __phys_to_pfn(paddr);
 	dram_io_desc[0].length = size;
@@ -75,9 +81,10 @@ static int __init omap_barriers_init(void)
 	pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n",
 		(long long) paddr, dram_io_desc[0].virtual);
 
-	return 0;
 }
-core_initcall(omap_barriers_init);
+#else
+void __init omap_barriers_init(void)
+{}
 #endif
 
 void __init gic_init_irq(void)

arch/arm/mach-omap2/pm.c

@@ -174,14 +174,17 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
 	freq = clk->rate;
 	clk_put(clk);
 
+	rcu_read_lock();
 	opp = opp_find_freq_ceil(dev, &freq);
 	if (IS_ERR(opp)) {
+		rcu_read_unlock();
 		pr_err("%s: unable to find boot up OPP for vdd_%s\n",
 			__func__, vdd_name);
 		goto exit;
 	}
 
 	bootup_volt = opp_get_voltage(opp);
+	rcu_read_unlock();
 	if (!bootup_volt) {
 		pr_err("%s: unable to find voltage corresponding "
 			"to the bootup OPP for vdd_%s\n", __func__, vdd_name);

arch/arm/mach-omap2/usb-host.c

@@ -486,7 +486,7 @@ static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 {
 	struct omap_hwmod	*oh[2];
-	struct omap_device	*od;
+	struct platform_device	*pdev;
 	int			bus_id = -1;
 	int			i;
 
@@ -522,11 +522,11 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 		return;
 	}
 
-	od = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
+	pdev = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
 				(void *)&usbhs_data, sizeof(usbhs_data),
 				omap_uhhtll_latency,
 				ARRAY_SIZE(omap_uhhtll_latency), false);
-	if (IS_ERR(od)) {
+	if (IS_ERR(pdev)) {
 		pr_err("Could not build hwmod devices %s,%s\n",
 			USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME);
 		return;

arch/arm/mach-pxa/hx4700.c

@@ -45,6 +45,7 @@
 #include <mach/hx4700.h>
 #include <mach/irda.h>
 
+#include <sound/ak4641.h>
 #include <video/platform_lcd.h>
 #include <video/w100fb.h>
 
@@ -764,6 +765,28 @@ static struct i2c_board_info __initdata pi2c_board_info[] = {
 	},
 };
 
+/*
+ * Asahi Kasei AK4641 on I2C
+ */
+
+static struct ak4641_platform_data ak4641_info = {
+	.gpio_power = GPIO27_HX4700_CODEC_ON,
+	.gpio_npdn  = GPIO109_HX4700_CODEC_nPDN,
+};
+
+static struct i2c_board_info i2c_board_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("ak4641", 0x12),
+		.platform_data = &ak4641_info,
+	},
+};
+
+static struct platform_device audio = {
+	.name	= "hx4700-audio",
+	.id	= -1,
+};
+
+
 /*
  * PCMCIA
  */
@@ -790,6 +813,7 @@ static struct platform_device *devices[] __initdata = {
 	&gpio_vbus,
 	&power_supply,
 	&strataflash,
+	&audio,
 	&pcmcia,
 };
 
@@ -827,6 +851,7 @@ static void __init hx4700_init(void)
 	pxa_set_ficp_info(&ficp_info);
 	pxa27x_set_i2c_power_info(NULL);
 	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info));
 	i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info));
 	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
 	spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));

arch/arm/mach-pxa/pxa25x.c

@@ -25,7 +25,6 @@
 #include <linux/suspend.h>
 #include <linux/syscore_ops.h>
 #include <linux/irq.h>
-#include <linux/gpio.h>
 
 #include <asm/mach/map.h>
 #include <asm/suspend.h>

arch/arm/mach-pxa/pxa27x.c

@@ -22,7 +22,6 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/i2c/pxa-i2c.h>
-#include <linux/gpio.h>
 
 #include <asm/mach/map.h>
 #include <mach/hardware.h>

arch/arm/mach-pxa/saarb.c

@@ -15,7 +15,6 @@
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
 #include <linux/mfd/88pm860x.h>
-#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

arch/arm/mach-pxa/sharpsl_pm.c

@@ -168,6 +168,7 @@ struct battery_thresh sharpsl_battery_levels_noac[] = {
 #define MAXCTRL_SEL_SH   4
 #define MAXCTRL_STR      (1u << 7)
 
+extern int max1111_read_channel(int);
 /*
  * Read MAX1111 ADC
  */
@@ -177,8 +178,6 @@ int sharpsl_pm_pxa_read_max1111(int channel)
 	if (machine_is_tosa())
 	    return 0;
 
-	extern int max1111_read_channel(int);
-
 	/* max1111 accepts channels from 0-3, however,
 	 * it is encoded from 0-7 here in the code.
 	 */

arch/arm/mach-pxa/spitz_pm.c

@@ -172,10 +172,9 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm)
 static unsigned long spitz_charger_wakeup(void)
 {
 	unsigned long ret;
-	ret = (!gpio_get_value(SPITZ_GPIO_KEY_INT)
+	ret = ((!gpio_get_value(SPITZ_GPIO_KEY_INT)
 		<< GPIO_bit(SPITZ_GPIO_KEY_INT))
-		| (!gpio_get_value(SPITZ_GPIO_SYNC)
-		<< GPIO_bit(SPITZ_GPIO_SYNC));
+		| gpio_get_value(SPITZ_GPIO_SYNC));
 	return ret;
 }
 

arch/arm/plat-omap/common.c

@@ -69,6 +69,7 @@ void __init omap_reserve(void)
 	omap_vram_reserve_sdram_memblock();
 	omap_dsp_reserve_sdram_memblock();
 	omap_secure_ram_reserve_memblock();
+	omap_barrier_reserve_memblock();
 }
 
 void __init omap_init_consistent_dma_size(void)

arch/arm/plat-omap/include/plat/omap-secure.h

@@ -10,4 +10,10 @@ static inline void omap_secure_ram_reserve_memblock(void)
 { }
 #endif
 
+#ifdef CONFIG_OMAP4_ERRATA_I688
+extern int omap_barrier_reserve_memblock(void);
+#else
+static inline void omap_barrier_reserve_memblock(void)
+{ }
+#endif
 #endif /* __OMAP_SECURE_H__ */

arch/mips/alchemy/common/time.c

@@ -146,7 +146,7 @@ static int __init alchemy_time_init(unsigned int m2int)
 	cd->shift = 32;
 	cd->mult = div_sc(32768, NSEC_PER_SEC, cd->shift);
 	cd->max_delta_ns = clockevent_delta2ns(0xffffffff, cd);
-	cd->min_delta_ns = clockevent_delta2ns(8, cd);	/* ~0.25ms */
+	cd->min_delta_ns = clockevent_delta2ns(9, cd);	/* ~0.28ms */
 	clockevents_register_device(cd);
 	setup_irq(m2int, &au1x_rtcmatch2_irqaction);
 

arch/mips/ath79/dev-wmac.c

@@ -96,7 +96,7 @@ void __init ath79_register_wmac(u8 *cal_data)
 {
 	if (soc_is_ar913x())
 		ar913x_wmac_setup();
-	if (soc_is_ar933x())
+	else if (soc_is_ar933x())
 		ar933x_wmac_setup();
 	else
 		BUG();

arch/mips/configs/nlm_xlp_defconfig

@@ -8,7 +8,7 @@ CONFIG_HIGH_RES_TIMERS=y
 # CONFIG_SECCOMP is not set
 CONFIG_USE_OF=y
 CONFIG_EXPERIMENTAL=y
-CONFIG_CROSS_COMPILE="mips-linux-gnu-"
+CONFIG_CROSS_COMPILE=""
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -22,7 +22,7 @@ CONFIG_AUDIT=y
 CONFIG_CGROUPS=y
 CONFIG_NAMESPACES=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="usr/dev_file_list usr/rootfs.xlp"
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
 CONFIG_INITRAMFS_COMPRESSION_LZMA=y

arch/mips/configs/nlm_xlr_defconfig

@@ -8,7 +8,7 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_KEXEC=y
 CONFIG_EXPERIMENTAL=y
-CONFIG_CROSS_COMPILE="mips-linux-gnu-"
+CONFIG_CROSS_COMPILE=""
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -22,7 +22,7 @@ CONFIG_AUDIT=y
 CONFIG_NAMESPACES=y
 CONFIG_SCHED_AUTOGROUP=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="usr/dev_file_list usr/rootfs.xlr"
+CONFIG_INITRAMFS_SOURCE=""
 CONFIG_RD_BZIP2=y
 CONFIG_RD_LZMA=y
 CONFIG_INITRAMFS_COMPRESSION_GZIP=y

arch/mips/configs/powertv_defconfig

@@ -6,7 +6,7 @@ CONFIG_HZ_1000=y
 CONFIG_PREEMPT=y
 # CONFIG_SECCOMP is not set
 CONFIG_EXPERIMENTAL=y
-CONFIG_CROSS_COMPILE="mips-linux-"
+CONFIG_CROSS_COMPILE=""
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=16

arch/mips/include/asm/mach-au1x00/gpio-au1300.h

@@ -11,6 +11,9 @@
 #include <asm/io.h>
 #include <asm/mach-au1x00/au1000.h>
 
+struct gpio;
+struct gpio_chip;
+
 /* with the current GPIC design, up to 128 GPIOs are possible.
  * The only implementation so far is in the Au1300, which has 75 externally
  * available GPIOs.
@@ -203,7 +206,22 @@ static inline int gpio_request(unsigned int gpio, const char *label)
 	return 0;
 }
 
-static inline void gpio_free(unsigned int gpio)
+static inline int gpio_request_one(unsigned gpio,
+					unsigned long flags, const char *label)
+{
+	return 0;
+}
+
+static inline int gpio_request_array(struct gpio *array, size_t num)
+{
+	return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+}
+
+static inline void gpio_free_array(struct gpio *array, size_t num)
 {
 }
 

arch/mips/include/asm/page.h

@@ -39,9 +39,6 @@
 #define HPAGE_MASK	(~(HPAGE_SIZE - 1))
 #define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
 #else /* !CONFIG_HUGETLB_PAGE */
-# ifndef BUILD_BUG
-#  define BUILD_BUG() do { extern void __build_bug(void); __build_bug(); } while (0)
-# endif
 #define HPAGE_SHIFT	({BUILD_BUG(); 0; })
 #define HPAGE_SIZE	({BUILD_BUG(); 0; })
 #define HPAGE_MASK	({BUILD_BUG(); 0; })

arch/mips/kernel/smp-bmips.c

@@ -8,7 +8,6 @@
  * SMP support for BMIPS
  */
 
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/mm.h>

arch/mips/kernel/traps.c

@@ -1135,7 +1135,7 @@ asmlinkage void do_mt(struct pt_regs *regs)
 		printk(KERN_DEBUG "YIELD Scheduler Exception\n");
 		break;
 	case 5:
-		printk(KERN_DEBUG "Gating Storage Schedulier Exception\n");
+		printk(KERN_DEBUG "Gating Storage Scheduler Exception\n");
 		break;
 	default:
 		printk(KERN_DEBUG "*** UNKNOWN THREAD EXCEPTION %d ***\n",

arch/mips/kernel/vmlinux.lds.S

@@ -69,7 +69,6 @@ SECTIONS
 	RODATA
 
 	/* writeable */
-	_sdata = .;				/* Start of data section */
 	.data : {	/* Data */
 		. = . + DATAOFFSET;		/* for CONFIG_MAPPED_KERNEL */
 

arch/mips/mm/fault.c

@@ -42,6 +42,8 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, unsigned long writ
 	const int field = sizeof(unsigned long) * 2;
 	siginfo_t info;
 	int fault;
+	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
+						 (write ? FAULT_FLAG_WRITE : 0);
 
 #if 0
 	printk("Cpu%d[%s:%d:%0*lx:%ld:%0*lx]\n", raw_smp_processor_id(),
@@ -91,6 +93,7 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, unsigned long writ
 	if (in_atomic() || !mm)
 		goto bad_area_nosemaphore;
 
+retry:
 	down_read(&mm->mmap_sem);
 	vma = find_vma(mm, address);
 	if (!vma)
@@ -144,7 +147,11 @@ good_area:
 	 * make sure we exit gracefully rather than endlessly redo
 	 * the fault.
 	 */
-	fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0);
+	fault = handle_mm_fault(mm, vma, address, flags);
+
+	if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
+		return;
+
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
@@ -153,12 +160,27 @@ good_area:
 			goto do_sigbus;
 		BUG();
 	}
-	if (fault & VM_FAULT_MAJOR) {
-		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs, address);
-		tsk->maj_flt++;
-	} else {
-		perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, regs, address);
-		tsk->min_flt++;
+	if (flags & FAULT_FLAG_ALLOW_RETRY) {
+		if (fault & VM_FAULT_MAJOR) {
+			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1,
+						  regs, address);
+			tsk->maj_flt++;
+		} else {
+			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1,
+						  regs, address);
+			tsk->min_flt++;
+		}
+		if (fault & VM_FAULT_RETRY) {
+			flags &= ~FAULT_FLAG_ALLOW_RETRY;
+
+			/*
+			 * No need to up_read(&mm->mmap_sem) as we would
+			 * have already released it in __lock_page_or_retry
+			 * in mm/filemap.c.
+			 */
+
+			goto retry;
+		}
 	}
 
 	up_read(&mm->mmap_sem);

arch/mips/pci/pci.c

@@ -279,7 +279,6 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
 {
 	/* Propagate hose info into the subordinate devices.  */
 
-	struct list_head *ln;
 	struct pci_dev *dev = bus->self;
 
 	if (pci_probe_only && dev &&
@@ -288,9 +287,7 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
 		pcibios_fixup_device_resources(dev, bus);
 	}
 
-	for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
-		dev = pci_dev_b(ln);
-
+	list_for_each_entry(dev, &bus->devices, bus_list) {
 		if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
 			pcibios_fixup_device_resources(dev, bus);
 	}

arch/mips/pmc-sierra/yosemite/ht-irq.c

@@ -35,16 +35,6 @@
  */
 void __init titan_ht_pcibios_fixup_bus(struct pci_bus *bus)
 {
-	struct pci_bus *current_bus = bus;
-	struct pci_dev *devices;
-	struct list_head *devices_link;
-
-	list_for_each(devices_link, &(current_bus->devices)) {
-		devices = pci_dev_b(devices_link);
-		if (devices == NULL)
-			continue;
-	}
-
 	/*
 	 * PLX and SPKT related changes go here
 	 */

arch/mips/txx9/generic/7segled.c

@@ -102,7 +102,7 @@ static int __init tx_7segled_init_sysfs(void)
 			break;
 		}
 		dev->id = i;
-		dev->dev = &tx_7segled_subsys;
+		dev->bus = &tx_7segled_subsys;
 		error = device_register(dev);
 		if (!error) {
 			device_create_file(dev, &dev_attr_ascii);

arch/openrisc/include/asm/ptrace.h

@@ -77,7 +77,6 @@ struct pt_regs {
 	long  syscallno;	/* Syscall number (used by strace) */
 	long dummy;		/* Cheap alignment fix */
 };
-#endif /* __ASSEMBLY__ */
 
 /* TODO: Rename this to REDZONE because that's what it is */
 #define STACK_FRAME_OVERHEAD  128  /* size of minimum stack frame */
@@ -87,6 +86,13 @@ struct pt_regs {
 #define user_stack_pointer(regs)	((unsigned long)(regs)->sp)
 #define profile_pc(regs)		instruction_pointer(regs)
 
+static inline long regs_return_value(struct pt_regs *regs)
+{
+	return regs->gpr[11];
+}
+
+#endif /* __ASSEMBLY__ */
+
 /*
  * Offsets used by 'ptrace' system call interface.
  */

arch/openrisc/kernel/init_task.c

@@ -17,6 +17,7 @@
 
 #include <linux/init_task.h>
 #include <linux/mqueue.h>
+#include <linux/export.h>
 
 static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
 static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);

arch/openrisc/kernel/irq.c

@@ -23,6 +23,7 @@
 #include <linux/irq.h>
 #include <linux/seq_file.h>
 #include <linux/kernel_stat.h>
+#include <linux/export.h>
 
 #include <linux/irqflags.h>
 

arch/openrisc/kernel/ptrace.c

@@ -188,11 +188,9 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
 		 */
 		ret = -1L;
 
-	/* Are these regs right??? */
-	if (unlikely(current->audit_context))
-		audit_syscall_entry(audit_arch(), regs->syscallno,
-				    regs->gpr[3], regs->gpr[4],
-				    regs->gpr[5], regs->gpr[6]);
+	audit_syscall_entry(audit_arch(), regs->syscallno,
+			    regs->gpr[3], regs->gpr[4],
+			    regs->gpr[5], regs->gpr[6]);
 
 	return ret ? : regs->syscallno;
 }
@@ -201,9 +199,7 @@ asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
 {
 	int step;
 
-	if (unlikely(current->audit_context))
-		audit_syscall_exit(AUDITSC_RESULT(regs->gpr[11]),
-				   regs->gpr[11]);
+	audit_syscall_exit(regs);
 
 	step = test_thread_flag(TIF_SINGLESTEP);
 	if (step || test_thread_flag(TIF_SYSCALL_TRACE))

arch/parisc/Makefile

@@ -31,7 +31,11 @@ ifdef CONFIG_64BIT
 UTS_MACHINE	:= parisc64
 CHECKFLAGS	+= -D__LP64__=1 -m64
 WIDTH		:= 64
+
+# FIXME: if no default set, should really try to locate dynamically
+ifeq ($(CROSS_COMPILE),)
 CROSS_COMPILE	:= hppa64-linux-gnu-
+endif
 else # 32-bit
 WIDTH		:=
 endif

arch/s390/Kconfig

@@ -227,6 +227,9 @@ config COMPAT
 config SYSVIPC_COMPAT
 	def_bool y if COMPAT && SYSVIPC
 
+config KEYS_COMPAT
+	def_bool y if COMPAT && KEYS
+
 config AUDIT_ARCH
 	def_bool y
 

arch/s390/include/asm/compat.h

@@ -172,13 +172,6 @@ static inline int is_compat_task(void)
 	return is_32bit_task();
 }
 
-#else
-
-static inline int is_compat_task(void)
-{
-	return 0;
-}
-
 #endif
 
 static inline void __user *arch_compat_alloc_user_space(long len)

arch/s390/kernel/crash_dump.c

@@ -11,7 +11,6 @@
 #include <linux/module.h>
 #include <linux/gfp.h>
 #include <linux/slab.h>
-#include <linux/crash_dump.h>
 #include <linux/bootmem.h>
 #include <linux/elf.h>
 #include <asm/ipl.h>

arch/s390/kernel/process.c

@@ -29,7 +29,6 @@
 #include <asm/irq.h>
 #include <asm/timer.h>
 #include <asm/nmi.h>
-#include <asm/compat.h>
 #include <asm/smp.h>
 #include "entry.h"
 

arch/s390/kernel/ptrace.c

@@ -20,8 +20,8 @@
 #include <linux/regset.h>
 #include <linux/tracehook.h>
 #include <linux/seccomp.h>
+#include <linux/compat.h>
 #include <trace/syscall.h>
-#include <asm/compat.h>
 #include <asm/segment.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>

arch/s390/kernel/setup.c

@@ -46,6 +46,7 @@
 #include <linux/kexec.h>
 #include <linux/crash_dump.h>
 #include <linux/memory.h>
+#include <linux/compat.h>
 
 #include <asm/ipl.h>
 #include <asm/uaccess.h>
@@ -59,7 +60,6 @@
 #include <asm/ptrace.h>
 #include <asm/sections.h>
 #include <asm/ebcdic.h>
-#include <asm/compat.h>
 #include <asm/kvm_virtio.h>
 #include <asm/diag.h>
 

arch/s390/kernel/signal.c

@@ -30,7 +30,6 @@
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
 #include <asm/lowcore.h>
-#include <asm/compat.h>
 #include "entry.h"
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))

arch/s390/mm/fault.c

@@ -36,7 +36,6 @@
 #include <asm/pgtable.h>
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
-#include <asm/compat.h>
 #include "../kernel/entry.h"
 
 #ifndef CONFIG_64BIT

arch/s390/mm/init.c

@@ -223,16 +223,38 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 #ifdef CONFIG_MEMORY_HOTPLUG
 int arch_add_memory(int nid, u64 start, u64 size)
 {
-	struct pglist_data *pgdat;
+	unsigned long zone_start_pfn, zone_end_pfn, nr_pages;
+	unsigned long start_pfn = PFN_DOWN(start);
+	unsigned long size_pages = PFN_DOWN(size);
 	struct zone *zone;
 	int rc;
 
-	pgdat = NODE_DATA(nid);
-	zone = pgdat->node_zones + ZONE_MOVABLE;
 	rc = vmem_add_mapping(start, size);
 	if (rc)
 		return rc;
-	rc = __add_pages(nid, zone, PFN_DOWN(start), PFN_DOWN(size));
+	for_each_zone(zone) {
+		if (zone_idx(zone) != ZONE_MOVABLE) {
+			/* Add range within existing zone limits */
+			zone_start_pfn = zone->zone_start_pfn;
+			zone_end_pfn = zone->zone_start_pfn +
+				       zone->spanned_pages;
+		} else {
+			/* Add remaining range to ZONE_MOVABLE */
+			zone_start_pfn = start_pfn;
+			zone_end_pfn = start_pfn + size_pages;
+		}
+		if (start_pfn < zone_start_pfn || start_pfn >= zone_end_pfn)
+			continue;
+		nr_pages = (start_pfn + size_pages > zone_end_pfn) ?
+			   zone_end_pfn - start_pfn : size_pages;
+		rc = __add_pages(nid, zone, start_pfn, nr_pages);
+		if (rc)
+			break;
+		start_pfn += nr_pages;
+		size_pages -= nr_pages;
+		if (!size_pages)
+			break;
+	}
 	if (rc)
 		vmem_remove_mapping(start, size);
 	return rc;

arch/s390/mm/mmap.c

@@ -29,8 +29,8 @@
 #include <linux/mman.h>
 #include <linux/module.h>
 #include <linux/random.h>
+#include <linux/compat.h>
 #include <asm/pgalloc.h>
-#include <asm/compat.h>
 
 static unsigned long stack_maxrandom_size(void)
 {

arch/x86/ia32/ia32_aout.c

@@ -315,6 +315,13 @@ static int load_aout_binary(struct linux_binprm *bprm, struct pt_regs *regs)
 	current->mm->free_area_cache = TASK_UNMAPPED_BASE;
 	current->mm->cached_hole_size = 0;
 
+	retval = setup_arg_pages(bprm, IA32_STACK_TOP, EXSTACK_DEFAULT);
+	if (retval < 0) {
+		/* Someone check-me: is this error path enough? */
+		send_sig(SIGKILL, current, 0);
+		return retval;
+	}
+
 	install_exec_creds(bprm);
 	current->flags &= ~PF_FORKNOEXEC;
 
@@ -410,13 +417,6 @@ beyond_if:
 
 	set_brk(current->mm->start_brk, current->mm->brk);
 
-	retval = setup_arg_pages(bprm, IA32_STACK_TOP, EXSTACK_DEFAULT);
-	if (retval < 0) {
-		/* Someone check-me: is this error path enough? */
-		send_sig(SIGKILL, current, 0);
-		return retval;
-	}
-
 	current->mm->start_stack =
 		(unsigned long)create_aout_tables((char __user *)bprm->p, bprm);
 	/* start thread */

arch/x86/include/asm/perf_event.h

@@ -242,4 +242,12 @@ static inline void perf_get_x86_pmu_capability(struct x86_pmu_capability *cap)
 static inline void perf_events_lapic_init(void)	{ }
 #endif
 
+#if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_CPU_SUP_AMD)
+ extern void amd_pmu_enable_virt(void);
+ extern void amd_pmu_disable_virt(void);
+#else
+ static inline void amd_pmu_enable_virt(void) { }
+ static inline void amd_pmu_disable_virt(void) { }
+#endif
+
 #endif /* _ASM_X86_PERF_EVENT_H */

arch/x86/kernel/cpu/intel_cacheinfo.c

@@ -326,8 +326,7 @@ static void __cpuinit amd_calc_l3_indices(struct amd_northbridge *nb)
 	l3->indices = (max(max3(sc0, sc1, sc2), sc3) << 10) - 1;
 }
 
-static void __cpuinit amd_init_l3_cache(struct _cpuid4_info_regs *this_leaf,
-					int index)
+static void __cpuinit amd_init_l3_cache(struct _cpuid4_info_regs *this_leaf, int index)
 {
 	int node;
 
@@ -725,14 +724,16 @@ static DEFINE_PER_CPU(struct _cpuid4_info *, ici_cpuid4_info);
 #define CPUID4_INFO_IDX(x, y)	(&((per_cpu(ici_cpuid4_info, x))[y]))
 
 #ifdef CONFIG_SMP
-static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
+
+static int __cpuinit cache_shared_amd_cpu_map_setup(unsigned int cpu, int index)
 {
-	struct _cpuid4_info	*this_leaf, *sibling_leaf;
-	unsigned long num_threads_sharing;
-	int index_msb, i, sibling;
+	struct _cpuid4_info *this_leaf;
+	int ret, i, sibling;
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
 
-	if ((index == 3) && (c->x86_vendor == X86_VENDOR_AMD)) {
+	ret = 0;
+	if (index == 3) {
+		ret = 1;
 		for_each_cpu(i, cpu_llc_shared_mask(cpu)) {
 			if (!per_cpu(ici_cpuid4_info, i))
 				continue;
@@ -743,8 +744,35 @@ static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
 				set_bit(sibling, this_leaf->shared_cpu_map);
 			}
 		}
-		return;
+	} else if ((c->x86 == 0x15) && ((index == 1) || (index == 2))) {
+		ret = 1;
+		for_each_cpu(i, cpu_sibling_mask(cpu)) {
+			if (!per_cpu(ici_cpuid4_info, i))
+				continue;
+			this_leaf = CPUID4_INFO_IDX(i, index);
+			for_each_cpu(sibling, cpu_sibling_mask(cpu)) {
+				if (!cpu_online(sibling))
+					continue;
+				set_bit(sibling, this_leaf->shared_cpu_map);
+			}
+		}
 	}
+
+	return ret;
+}
+
+static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
+{
+	struct _cpuid4_info *this_leaf, *sibling_leaf;
+	unsigned long num_threads_sharing;
+	int index_msb, i;
+	struct cpuinfo_x86 *c = &cpu_data(cpu);
+
+	if (c->x86_vendor == X86_VENDOR_AMD) {
+		if (cache_shared_amd_cpu_map_setup(cpu, index))
+			return;
+	}
+
 	this_leaf = CPUID4_INFO_IDX(cpu, index);
 	num_threads_sharing = 1 + this_leaf->base.eax.split.num_threads_sharing;
 

arch/x86/kernel/cpu/mcheck/mce_amd.c

@@ -528,6 +528,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 
 	sprintf(name, "threshold_bank%i", bank);
 
+#ifdef CONFIG_SMP
 	if (cpu_data(cpu).cpu_core_id && shared_bank[bank]) {	/* symlink */
 		i = cpumask_first(cpu_llc_shared_mask(cpu));
 
@@ -553,6 +554,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 
 		goto out;
 	}
+#endif
 
 	b = kzalloc(sizeof(struct threshold_bank), GFP_KERNEL);
 	if (!b) {

arch/x86/kernel/cpu/perf_event.h

@@ -147,7 +147,9 @@ struct cpu_hw_events {
 	/*
 	 * AMD specific bits
 	 */
-	struct amd_nb		*amd_nb;
+	struct amd_nb			*amd_nb;
+	/* Inverted mask of bits to clear in the perf_ctr ctrl registers */
+	u64				perf_ctr_virt_mask;
 
 	void				*kfree_on_online;
 };
@@ -417,9 +419,11 @@ void x86_pmu_disable_all(void);
 static inline void __x86_pmu_enable_event(struct hw_perf_event *hwc,
 					  u64 enable_mask)
 {
+	u64 disable_mask = __this_cpu_read(cpu_hw_events.perf_ctr_virt_mask);
+
 	if (hwc->extra_reg.reg)
 		wrmsrl(hwc->extra_reg.reg, hwc->extra_reg.config);
-	wrmsrl(hwc->config_base, hwc->config | enable_mask);
+	wrmsrl(hwc->config_base, (hwc->config | enable_mask) & ~disable_mask);
 }
 
 void x86_pmu_enable_all(int added);

arch/x86/kernel/cpu/perf_event_amd.c

@@ -1,4 +1,5 @@
 #include <linux/perf_event.h>
+#include <linux/export.h>
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -357,7 +358,9 @@ static void amd_pmu_cpu_starting(int cpu)
 	struct amd_nb *nb;
 	int i, nb_id;
 
-	if (boot_cpu_data.x86_max_cores < 2)
+	cpuc->perf_ctr_virt_mask = AMD_PERFMON_EVENTSEL_HOSTONLY;
+
+	if (boot_cpu_data.x86_max_cores < 2 || boot_cpu_data.x86 == 0x15)
 		return;
 
 	nb_id = amd_get_nb_id(cpu);
@@ -587,9 +590,9 @@ static __initconst const struct x86_pmu amd_pmu_f15h = {
 	.put_event_constraints	= amd_put_event_constraints,
 
 	.cpu_prepare		= amd_pmu_cpu_prepare,
-	.cpu_starting		= amd_pmu_cpu_starting,
 	.cpu_dead		= amd_pmu_cpu_dead,
 #endif
+	.cpu_starting		= amd_pmu_cpu_starting,
 };
 
 __init int amd_pmu_init(void)
@@ -621,3 +624,33 @@ __init int amd_pmu_init(void)
 
 	return 0;
 }
+
+void amd_pmu_enable_virt(void)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+	cpuc->perf_ctr_virt_mask = 0;
+
+	/* Reload all events */
+	x86_pmu_disable_all();
+	x86_pmu_enable_all(0);
+}
+EXPORT_SYMBOL_GPL(amd_pmu_enable_virt);
+
+void amd_pmu_disable_virt(void)
+{
+	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+	/*
+	 * We only mask out the Host-only bit so that host-only counting works
+	 * when SVM is disabled. If someone sets up a guest-only counter when
+	 * SVM is disabled the Guest-only bits still gets set and the counter
+	 * will not count anything.
+	 */
+	cpuc->perf_ctr_virt_mask = AMD_PERFMON_EVENTSEL_HOSTONLY;
+
+	/* Reload all events */
+	x86_pmu_disable_all();
+	x86_pmu_enable_all(0);
+}
+EXPORT_SYMBOL_GPL(amd_pmu_disable_virt);

arch/x86/kernel/entry_64.S

@@ -1531,11 +1531,18 @@ ENTRY(nmi)
 	/* Use %rdx as out temp variable throughout */
 	pushq_cfi %rdx
 
+	/*
+	 * If %cs was not the kernel segment, then the NMI triggered in user
+	 * space, which means it is definitely not nested.
+	 */
+	cmpl $__KERNEL_CS, 16(%rsp)
+	jne first_nmi
+
 	/*
 	 * Check the special variable on the stack to see if NMIs are
 	 * executing.
 	 */
-	cmp $1, -8(%rsp)
+	cmpl $1, -8(%rsp)
 	je nested_nmi
 
 	/*

arch/x86/kernel/microcode_amd.c

@@ -360,7 +360,6 @@ out:
 static enum ucode_state
 request_microcode_user(int cpu, const void __user *buf, size_t size)
 {
-	pr_info("AMD microcode update via /dev/cpu/microcode not supported\n");
 	return UCODE_ERROR;
 }
 

arch/x86/kvm/svm.c

@@ -29,6 +29,7 @@
 #include <linux/ftrace_event.h>
 #include <linux/slab.h>
 
+#include <asm/perf_event.h>
 #include <asm/tlbflush.h>
 #include <asm/desc.h>
 #include <asm/kvm_para.h>
@@ -575,6 +576,8 @@ static void svm_hardware_disable(void *garbage)
 		wrmsrl(MSR_AMD64_TSC_RATIO, TSC_RATIO_DEFAULT);
 
 	cpu_svm_disable();
+
+	amd_pmu_disable_virt();
 }
 
 static int svm_hardware_enable(void *garbage)
@@ -622,6 +625,8 @@ static int svm_hardware_enable(void *garbage)
 
 	svm_init_erratum_383();
 
+	amd_pmu_enable_virt();
+
 	return 0;
 }
 

arch/x86/pci/acpi.c

@@ -60,6 +60,16 @@ static const struct dmi_system_id pci_use_crs_table[] __initconst = {
 			DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
 		},
 	},
+	/* https://bugzilla.kernel.org/show_bug.cgi?id=42619 */
+	{
+		.callback = set_use_crs,
+		.ident = "MSI MS-7253",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
+			DMI_MATCH(DMI_BOARD_NAME, "MS-7253"),
+			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
+		},
+	},
 
 	/* Now for the blacklist.. */
 
@@ -282,9 +292,6 @@ static void add_resources(struct pci_root_info *info)
 	int i;
 	struct resource *res, *root, *conflict;
 
-	if (!pci_use_crs)
-		return;
-
 	coalesce_windows(info, IORESOURCE_MEM);
 	coalesce_windows(info, IORESOURCE_IO);
 
@@ -336,8 +343,13 @@ get_current_resources(struct acpi_device *device, int busnum,
 	acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
 				&info);
 
-	add_resources(&info);
-	return;
+	if (pci_use_crs) {
+		add_resources(&info);
+
+		return;
+	}
+
+	kfree(info.name);
 
 name_alloc_fail:
 	kfree(info.res);

arch/x86/xen/enlighten.c

@@ -1141,7 +1141,9 @@ asmlinkage void __init xen_start_kernel(void)
 
 	/* Prevent unwanted bits from being set in PTEs. */
 	__supported_pte_mask &= ~_PAGE_GLOBAL;
+#if 0
 	if (!xen_initial_domain())
+#endif
 		__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
 
 	__supported_pte_mask |= _PAGE_IOMAP;
@@ -1204,10 +1206,6 @@ asmlinkage void __init xen_start_kernel(void)
 
 	pgd = (pgd_t *)xen_start_info->pt_base;
 
-	if (!xen_initial_domain())
-		__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
-
-	__supported_pte_mask |= _PAGE_IOMAP;
 	/* Don't do the full vcpu_info placement stuff until we have a
 	   possible map and a non-dummy shared_info. */
 	per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];

arch/x86/xen/mmu.c

@@ -415,13 +415,13 @@ static pteval_t iomap_pte(pteval_t val)
 static pteval_t xen_pte_val(pte_t pte)
 {
 	pteval_t pteval = pte.pte;
-
+#if 0
 	/* If this is a WC pte, convert back from Xen WC to Linux WC */
 	if ((pteval & (_PAGE_PAT | _PAGE_PCD | _PAGE_PWT)) == _PAGE_PAT) {
 		WARN_ON(!pat_enabled);
 		pteval = (pteval & ~_PAGE_PAT) | _PAGE_PWT;
 	}
-
+#endif
 	if (xen_initial_domain() && (pteval & _PAGE_IOMAP))
 		return pteval;
 
@@ -463,7 +463,7 @@ void xen_set_pat(u64 pat)
 static pte_t xen_make_pte(pteval_t pte)
 {
 	phys_addr_t addr = (pte & PTE_PFN_MASK);
-
+#if 0
 	/* If Linux is trying to set a WC pte, then map to the Xen WC.
 	 * If _PAGE_PAT is set, then it probably means it is really
 	 * _PAGE_PSE, so avoid fiddling with the PAT mapping and hope
@@ -476,7 +476,7 @@ static pte_t xen_make_pte(pteval_t pte)
 		if ((pte & (_PAGE_PCD | _PAGE_PWT)) == _PAGE_PWT)
 			pte = (pte & ~(_PAGE_PCD | _PAGE_PWT)) | _PAGE_PAT;
 	}
-
+#endif
 	/*
 	 * Unprivileged domains are allowed to do IOMAPpings for
 	 * PCI passthrough, but not map ISA space.  The ISA

block/partitions/ldm.c

@@ -2,7 +2,7 @@
  * ldm - Support for Windows Logical Disk Manager (Dynamic Disks)
  *
  * Copyright (C) 2001,2002 Richard Russon <ldm@flatcap.org>
- * Copyright (c) 2001-2007 Anton Altaparmakov
+ * Copyright (c) 2001-2012 Anton Altaparmakov
  * Copyright (C) 2001,2002 Jakob Kemi <jakob.kemi@telia.com>
  *
  * Documentation is available at http://www.linux-ntfs.org/doku.php?id=downloads 
@@ -1341,20 +1341,17 @@ found:
 		ldm_error("REC value (%d) exceeds NUM value (%d)", rec, f->num);
 		return false;
 	}
-
 	if (f->map & (1 << rec)) {
 		ldm_error ("Duplicate VBLK, part %d.", rec);
 		f->map &= 0x7F;			/* Mark the group as broken */
 		return false;
 	}
-
 	f->map |= (1 << rec);
-
+	if (!rec)
+		memcpy(f->data, data, VBLK_SIZE_HEAD);
 	data += VBLK_SIZE_HEAD;
 	size -= VBLK_SIZE_HEAD;
-
-	memcpy (f->data+rec*(size-VBLK_SIZE_HEAD)+VBLK_SIZE_HEAD, data, size);
-
+	memcpy(f->data + VBLK_SIZE_HEAD + rec * size, data, size);
 	return true;
 }
 

drivers/block/floppy.c

@@ -3832,7 +3832,7 @@ static int __floppy_read_block_0(struct block_device *bdev)
 	bio.bi_size = size;
 	bio.bi_bdev = bdev;
 	bio.bi_sector = 0;
-	bio.bi_flags = BIO_QUIET;
+	bio.bi_flags = (1 << BIO_QUIET);
 	init_completion(&complete);
 	bio.bi_private = &complete;
 	bio.bi_end_io = floppy_rb0_complete;

drivers/crypto/mv_cesa.c

@@ -714,6 +714,7 @@ static int mv_hash_final(struct ahash_request *req)
 {
 	struct mv_req_hash_ctx *ctx = ahash_request_ctx(req);
 
+	ahash_request_set_crypt(req, NULL, req->result, 0);
 	mv_update_hash_req_ctx(ctx, 1, 0);
 	return mv_handle_req(&req->base);
 }

drivers/gpu/drm/exynos/exynos_drm_connector.c

@@ -28,6 +28,7 @@
 #include "drmP.h"
 #include "drm_crtc_helper.h"
 
+#include <drm/exynos_drm.h>
 #include "exynos_drm_drv.h"
 #include "exynos_drm_encoder.h"
 
@@ -44,8 +45,9 @@ struct exynos_drm_connector {
 /* convert exynos_video_timings to drm_display_mode */
 static inline void
 convert_to_display_mode(struct drm_display_mode *mode,
-			struct fb_videomode *timing)
+			struct exynos_drm_panel_info *panel)
 {
+	struct fb_videomode *timing = &panel->timing;
 	DRM_DEBUG_KMS("%s\n", __FILE__);
 
 	mode->clock = timing->pixclock / 1000;
@@ -60,6 +62,8 @@ convert_to_display_mode(struct drm_display_mode *mode,
 	mode->vsync_start = mode->vdisplay + timing->upper_margin;
 	mode->vsync_end = mode->vsync_start + timing->vsync_len;
 	mode->vtotal = mode->vsync_end + timing->lower_margin;
+	mode->width_mm = panel->width_mm;
+	mode->height_mm = panel->height_mm;
 
 	if (timing->vmode & FB_VMODE_INTERLACED)
 		mode->flags |= DRM_MODE_FLAG_INTERLACE;
@@ -148,16 +152,18 @@ static int exynos_drm_connector_get_modes(struct drm_connector *connector)
 		connector->display_info.raw_edid = edid;
 	} else {
 		struct drm_display_mode *mode = drm_mode_create(connector->dev);
-		struct fb_videomode *timing;
+		struct exynos_drm_panel_info *panel;
 
-		if (display_ops->get_timing)
-			timing = display_ops->get_timing(manager->dev);
+		if (display_ops->get_panel)
+			panel = display_ops->get_panel(manager->dev);
 		else {
 			drm_mode_destroy(connector->dev, mode);
 			return 0;
 		}
 
-		convert_to_display_mode(mode, timing);
+		convert_to_display_mode(mode, panel);
+		connector->display_info.width_mm = mode->width_mm;
+		connector->display_info.height_mm = mode->height_mm;
 
 		mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
 		drm_mode_set_name(mode);

drivers/gpu/drm/exynos/exynos_drm_drv.h

@@ -136,7 +136,7 @@ struct exynos_drm_overlay {
  * @type: one of EXYNOS_DISPLAY_TYPE_LCD and HDMI.
  * @is_connected: check for that display is connected or not.
  * @get_edid: get edid modes from display driver.
- * @get_timing: get timing object from display driver.
+ * @get_panel: get panel object from display driver.
  * @check_timing: check if timing is valid or not.
  * @power_on: display device on or off.
  */
@@ -145,7 +145,7 @@ struct exynos_drm_display_ops {
 	bool (*is_connected)(struct device *dev);
 	int (*get_edid)(struct device *dev, struct drm_connector *connector,
 				u8 *edid, int len);
-	void *(*get_timing)(struct device *dev);
+	void *(*get_panel)(struct device *dev);
 	int (*check_timing)(struct device *dev, void *timing);
 	int (*power_on)(struct device *dev, int mode);
 };

drivers/gpu/drm/exynos/exynos_drm_fimd.c

@@ -89,7 +89,7 @@ struct fimd_context {
 	bool				suspended;
 	struct mutex			lock;
 
-	struct fb_videomode		*timing;
+	struct exynos_drm_panel_info *panel;
 };
 
 static bool fimd_display_is_connected(struct device *dev)
@@ -101,13 +101,13 @@ static bool fimd_display_is_connected(struct device *dev)
 	return true;
 }
 
-static void *fimd_get_timing(struct device *dev)
+static void *fimd_get_panel(struct device *dev)
 {
 	struct fimd_context *ctx = get_fimd_context(dev);
 
 	DRM_DEBUG_KMS("%s\n", __FILE__);
 
-	return ctx->timing;
+	return ctx->panel;
 }
 
 static int fimd_check_timing(struct device *dev, void *timing)
@@ -131,7 +131,7 @@ static int fimd_display_power_on(struct device *dev, int mode)
 static struct exynos_drm_display_ops fimd_display_ops = {
 	.type = EXYNOS_DISPLAY_TYPE_LCD,
 	.is_connected = fimd_display_is_connected,
-	.get_timing = fimd_get_timing,
+	.get_panel = fimd_get_panel,
 	.check_timing = fimd_check_timing,
 	.power_on = fimd_display_power_on,
 };
@@ -193,7 +193,8 @@ static void fimd_apply(struct device *subdrv_dev)
 static void fimd_commit(struct device *dev)
 {
 	struct fimd_context *ctx = get_fimd_context(dev);
-	struct fb_videomode *timing = ctx->timing;
+	struct exynos_drm_panel_info *panel = ctx->panel;
+	struct fb_videomode *timing = &panel->timing;
 	u32 val;
 
 	if (ctx->suspended)
@@ -786,7 +787,7 @@ static int __devinit fimd_probe(struct platform_device *pdev)
 	struct fimd_context *ctx;
 	struct exynos_drm_subdrv *subdrv;
 	struct exynos_drm_fimd_pdata *pdata;
-	struct fb_videomode *timing;
+	struct exynos_drm_panel_info *panel;
 	struct resource *res;
 	int win;
 	int ret = -EINVAL;
@@ -799,9 +800,9 @@ static int __devinit fimd_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	timing = &pdata->timing;
-	if (!timing) {
-		dev_err(dev, "timing is null.\n");
+	panel = &pdata->panel;
+	if (!panel) {
+		dev_err(dev, "panel is null.\n");
 		return -EINVAL;
 	}
 
@@ -863,16 +864,16 @@ static int __devinit fimd_probe(struct platform_device *pdev)
 		goto err_req_irq;
 	}
 
-	ctx->clkdiv = fimd_calc_clkdiv(ctx, timing);
+	ctx->clkdiv = fimd_calc_clkdiv(ctx, &panel->timing);
 	ctx->vidcon0 = pdata->vidcon0;
 	ctx->vidcon1 = pdata->vidcon1;
 	ctx->default_win = pdata->default_win;
-	ctx->timing = timing;
+	ctx->panel = panel;
 
-	timing->pixclock = clk_get_rate(ctx->lcd_clk) / ctx->clkdiv;
+	panel->timing.pixclock = clk_get_rate(ctx->lcd_clk) / ctx->clkdiv;
 
 	DRM_DEBUG_KMS("pixel clock = %d, clkdiv = %d\n",
-			timing->pixclock, ctx->clkdiv);
+			panel->timing.pixclock, ctx->clkdiv);
 
 	subdrv = &ctx->subdrv;
 

drivers/gpu/drm/gma500/cdv_device.c

@@ -321,6 +321,8 @@ static int cdv_chip_setup(struct drm_device *dev)
 	cdv_get_core_freq(dev);
 	gma_intel_opregion_init(dev);
 	psb_intel_init_bios(dev);
+	REG_WRITE(PORT_HOTPLUG_EN, 0);
+	REG_WRITE(PORT_HOTPLUG_STAT, REG_READ(PORT_HOTPLUG_STAT));
 	return 0;
 }
 

drivers/gpu/drm/gma500/framebuffer.c

@@ -247,7 +247,6 @@ static struct fb_ops psbfb_roll_ops = {
 	.fb_imageblit = cfb_imageblit,
 	.fb_pan_display = psbfb_pan,
 	.fb_mmap = psbfb_mmap,
-	.fb_sync = psbfb_sync,
 	.fb_ioctl = psbfb_ioctl,
 };
 

drivers/gpu/drm/gma500/gtt.c

@@ -446,10 +446,9 @@ int psb_gtt_init(struct drm_device *dev, int resume)
 	pg->gtt_start = pci_resource_start(dev->pdev, PSB_GTT_RESOURCE);
 	gtt_pages = pci_resource_len(dev->pdev, PSB_GTT_RESOURCE)
 								>> PAGE_SHIFT;
-	/* Some CDV firmware doesn't report this currently. In which case the
-	   system has 64 gtt pages */
+	/* CDV doesn't report this. In which case the system has 64 gtt pages */
 	if (pg->gtt_start == 0 || gtt_pages == 0) {
-		dev_err(dev->dev, "GTT PCI BAR not initialized.\n");
+		dev_dbg(dev->dev, "GTT PCI BAR not initialized.\n");
 		gtt_pages = 64;
 		pg->gtt_start = dev_priv->pge_ctl;
 	}
@@ -461,10 +460,10 @@ int psb_gtt_init(struct drm_device *dev, int resume)
 
 	if (pg->gatt_pages == 0 || pg->gatt_start == 0) {
 		static struct resource fudge;	/* Preferably peppermint */
-		/* This can occur on CDV SDV systems. Fudge it in this case.
+		/* This can occur on CDV systems. Fudge it in this case.
 		   We really don't care what imaginary space is being allocated
 		   at this point */
-		dev_err(dev->dev, "GATT PCI BAR not initialized.\n");
+		dev_dbg(dev->dev, "GATT PCI BAR not initialized.\n");
 		pg->gatt_start = 0x40000000;
 		pg->gatt_pages = (128 * 1024 * 1024) >> PAGE_SHIFT;
 		/* This is a little confusing but in fact the GTT is providing

drivers/gpu/drm/i915/intel_display.c

@@ -4680,8 +4680,17 @@ sandybridge_compute_sprite_srwm(struct drm_device *dev, int plane,
 
 	crtc = intel_get_crtc_for_plane(dev, plane);
 	clock = crtc->mode.clock;
+	if (!clock) {
+		*sprite_wm = 0;
+		return false;
+	}
 
 	line_time_us = (sprite_width * 1000) / clock;
+	if (!line_time_us) {
+		*sprite_wm = 0;
+		return false;
+	}
+
 	line_count = (latency_ns / line_time_us + 1000) / 1000;
 	line_size = sprite_width * pixel_size;
 
@@ -6175,7 +6184,7 @@ void intel_crtc_load_lut(struct drm_crtc *crtc)
 	int i;
 
 	/* The clocks have to be on to load the palette. */
-	if (!crtc->enabled)
+	if (!crtc->enabled || !intel_crtc->active)
 		return;
 
 	/* use legacy palette for Ironlake */
@@ -6561,7 +6570,7 @@ intel_framebuffer_create_for_mode(struct drm_device *dev,
 	mode_cmd.height = mode->vdisplay;
 	mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width,
 								bpp);
-	mode_cmd.pixel_format = 0;
+	mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth);
 
 	return intel_framebuffer_create(dev, &mode_cmd, obj);
 }
@@ -8185,7 +8194,7 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv)
 
 	if (intel_enable_rc6(dev_priv->dev))
 		rc6_mask = GEN6_RC_CTL_RC6_ENABLE |
-			(IS_GEN7(dev_priv->dev)) ? GEN6_RC_CTL_RC6p_ENABLE : 0;
+			((IS_GEN7(dev_priv->dev)) ? GEN6_RC_CTL_RC6p_ENABLE : 0);
 
 	I915_WRITE(GEN6_RC_CONTROL,
 		   rc6_mask |

drivers/gpu/drm/i915/intel_ringbuffer.c

@@ -301,7 +301,7 @@ static int init_ring_common(struct intel_ring_buffer *ring)
 
 	I915_WRITE_CTL(ring,
 			((ring->size - PAGE_SIZE) & RING_NR_PAGES)
-			| RING_REPORT_64K | RING_VALID);
+			| RING_VALID);
 
 	/* If the head is still not zero, the ring is dead */
 	if ((I915_READ_CTL(ring) & RING_VALID) == 0 ||
@@ -1132,18 +1132,6 @@ int intel_wait_ring_buffer(struct intel_ring_buffer *ring, int n)
 	struct drm_device *dev = ring->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	unsigned long end;
-	u32 head;
-
-	/* If the reported head position has wrapped or hasn't advanced,
-	 * fallback to the slow and accurate path.
-	 */
-	head = intel_read_status_page(ring, 4);
-	if (head > ring->head) {
-		ring->head = head;
-		ring->space = ring_space(ring);
-		if (ring->space >= n)
-			return 0;
-	}
 
 	trace_i915_ring_wait_begin(ring);
 	if (drm_core_check_feature(dev, DRIVER_GEM))

drivers/gpu/drm/radeon/r600_cs.c

@@ -1304,6 +1304,7 @@ static int r600_check_texture_resource(struct radeon_cs_parser *p,  u32 idx,
 	h0 = G_038004_TEX_HEIGHT(word1) + 1;
 	d0 = G_038004_TEX_DEPTH(word1);
 	nfaces = 1;
+	array = 0;
 	switch (G_038000_DIM(word0)) {
 	case V_038000_SQ_TEX_DIM_1D:
 	case V_038000_SQ_TEX_DIM_2D:

drivers/gpu/drm/radeon/radeon_connectors.c

@@ -1117,13 +1117,23 @@ static int radeon_dp_get_modes(struct drm_connector *connector)
 	    (connector->connector_type == DRM_MODE_CONNECTOR_LVDS)) {
 		struct drm_display_mode *mode;
 
-		if (!radeon_dig_connector->edp_on)
-			atombios_set_edp_panel_power(connector,
-						     ATOM_TRANSMITTER_ACTION_POWER_ON);
-		ret = radeon_ddc_get_modes(radeon_connector);
-		if (!radeon_dig_connector->edp_on)
-			atombios_set_edp_panel_power(connector,
-						     ATOM_TRANSMITTER_ACTION_POWER_OFF);
+		if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
+			if (!radeon_dig_connector->edp_on)
+				atombios_set_edp_panel_power(connector,
+							     ATOM_TRANSMITTER_ACTION_POWER_ON);
+			ret = radeon_ddc_get_modes(radeon_connector);
+			if (!radeon_dig_connector->edp_on)
+				atombios_set_edp_panel_power(connector,
+							     ATOM_TRANSMITTER_ACTION_POWER_OFF);
+		} else {
+			/* need to setup ddc on the bridge */
+			if (radeon_connector_encoder_get_dp_bridge_encoder_id(connector) !=
+			    ENCODER_OBJECT_ID_NONE) {
+				if (encoder)
+					radeon_atom_ext_encoder_setup_ddc(encoder);
+			}
+			ret = radeon_ddc_get_modes(radeon_connector);
+		}
 
 		if (ret > 0) {
 			if (encoder) {
@@ -1134,7 +1144,6 @@ static int radeon_dp_get_modes(struct drm_connector *connector)
 			return ret;
 		}
 
-		encoder = radeon_best_single_encoder(connector);
 		if (!encoder)
 			return 0;
 

drivers/gpu/drm/radeon/radeon_gart.c

@@ -597,13 +597,13 @@ int radeon_vm_bo_rmv(struct radeon_device *rdev,
 	if (bo_va == NULL)
 		return 0;
 
-	list_del(&bo_va->bo_list);
 	mutex_lock(&vm->mutex);
 	radeon_mutex_lock(&rdev->cs_mutex);
 	radeon_vm_bo_update_pte(rdev, vm, bo, NULL);
 	radeon_mutex_unlock(&rdev->cs_mutex);
 	list_del(&bo_va->vm_list);
 	mutex_unlock(&vm->mutex);
+	list_del(&bo_va->bo_list);
 
 	kfree(bo_va);
 	return 0;

drivers/hid/hid-ids.h

@@ -59,6 +59,9 @@
 #define USB_VENDOR_ID_AIRCABLE		0x16CA
 #define USB_DEVICE_ID_AIRCABLE1		0x1502
 
+#define USB_VENDOR_ID_AIREN		0x1a2c
+#define USB_DEVICE_ID_AIREN_SLIMPLUS	0x0002
+
 #define USB_VENDOR_ID_ALCOR		0x058f
 #define USB_DEVICE_ID_ALCOR_USBRS232	0x9720
 

drivers/hid/hid-input.c

@@ -986,8 +986,13 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct
 		return;
 	}
 
-	/* Ignore out-of-range values as per HID specification, section 5.10 */
-	if (value < field->logical_minimum || value > field->logical_maximum) {
+	/*
+	 * Ignore out-of-range values as per HID specification,
+	 * section 5.10 and 6.2.25
+	 */
+	if ((field->flags & HID_MAIN_ITEM_VARIABLE) &&
+	    (value < field->logical_minimum ||
+	     value > field->logical_maximum)) {
 		dbg_hid("Ignoring out-of-range value %x\n", value);
 		return;
 	}

drivers/hid/usbhid/hid-quirks.c

@@ -54,6 +54,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_PLAYDOTCOM, USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_TOUCHPACK, USB_DEVICE_ID_TOUCHPACK_RTS, HID_QUIRK_MULTI_INPUT },
 
+	{ USB_VENDOR_ID_AIREN, USB_DEVICE_ID_AIREN_SLIMPLUS, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_UC100KM, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS124U, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM, HID_QUIRK_NOGET },

drivers/hwmon/f75375s.c

@@ -178,6 +178,16 @@ static inline void f75375_write16(struct i2c_client *client, u8 reg,
 	i2c_smbus_write_byte_data(client, reg + 1, (value & 0xFF));
 }
 
+static void f75375_write_pwm(struct i2c_client *client, int nr)
+{
+	struct f75375_data *data = i2c_get_clientdata(client);
+	if (data->kind == f75387)
+		f75375_write16(client, F75375_REG_FAN_EXP(nr), data->pwm[nr]);
+	else
+		f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
+			      data->pwm[nr]);
+}
+
 static struct f75375_data *f75375_update_device(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
@@ -254,6 +264,36 @@ static inline u16 rpm_to_reg(int rpm)
 	return 1500000 / rpm;
 }
 
+static bool duty_mode_enabled(u8 pwm_enable)
+{
+	switch (pwm_enable) {
+	case 0: /* Manual, duty mode (full speed) */
+	case 1: /* Manual, duty mode */
+	case 4: /* Auto, duty mode */
+		return true;
+	case 2: /* Auto, speed mode */
+	case 3: /* Manual, speed mode */
+		return false;
+	default:
+		BUG();
+	}
+}
+
+static bool auto_mode_enabled(u8 pwm_enable)
+{
+	switch (pwm_enable) {
+	case 0: /* Manual, duty mode (full speed) */
+	case 1: /* Manual, duty mode */
+	case 3: /* Manual, speed mode */
+		return false;
+	case 2: /* Auto, speed mode */
+	case 4: /* Auto, duty mode */
+		return true;
+	default:
+		BUG();
+	}
+}
+
 static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
 		const char *buf, size_t count)
 {
@@ -287,6 +327,11 @@ static ssize_t set_fan_target(struct device *dev, struct device_attribute *attr,
 	if (err < 0)
 		return err;
 
+	if (auto_mode_enabled(data->pwm_enable[nr]))
+		return -EINVAL;
+	if (data->kind == f75387 && duty_mode_enabled(data->pwm_enable[nr]))
+		return -EINVAL;
+
 	mutex_lock(&data->update_lock);
 	data->fan_target[nr] = rpm_to_reg(val);
 	f75375_write16(client, F75375_REG_FAN_EXP(nr), data->fan_target[nr]);
@@ -307,9 +352,13 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
 	if (err < 0)
 		return err;
 
+	if (auto_mode_enabled(data->pwm_enable[nr]) ||
+	    !duty_mode_enabled(data->pwm_enable[nr]))
+		return -EINVAL;
+
 	mutex_lock(&data->update_lock);
 	data->pwm[nr] = SENSORS_LIMIT(val, 0, 255);
-	f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr), data->pwm[nr]);
+	f75375_write_pwm(client, nr);
 	mutex_unlock(&data->update_lock);
 	return count;
 }
@@ -327,11 +376,15 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val)
 	struct f75375_data *data = i2c_get_clientdata(client);
 	u8 fanmode;
 
-	if (val < 0 || val > 3)
+	if (val < 0 || val > 4)
 		return -EINVAL;
 
 	fanmode = f75375_read8(client, F75375_REG_FAN_TIMER);
 	if (data->kind == f75387) {
+		/* For now, deny dangerous toggling of duty mode */
+		if (duty_mode_enabled(data->pwm_enable[nr]) !=
+				duty_mode_enabled(val))
+			return -EOPNOTSUPP;
 		/* clear each fanX_mode bit before setting them properly */
 		fanmode &= ~(1 << F75387_FAN_DUTY_MODE(nr));
 		fanmode &= ~(1 << F75387_FAN_MANU_MODE(nr));
@@ -345,12 +398,14 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val)
 			fanmode  |= (1 << F75387_FAN_MANU_MODE(nr));
 			fanmode  |= (1 << F75387_FAN_DUTY_MODE(nr));
 			break;
-		case 2: /* AUTOMATIC*/
-			fanmode  |=  (1 << F75387_FAN_DUTY_MODE(nr));
+		case 2: /* Automatic, speed mode */
 			break;
 		case 3: /* fan speed */
 			fanmode |= (1 << F75387_FAN_MANU_MODE(nr));
 			break;
+		case 4: /* Automatic, pwm */
+			fanmode |= (1 << F75387_FAN_DUTY_MODE(nr));
+			break;
 		}
 	} else {
 		/* clear each fanX_mode bit before setting them properly */
@@ -368,14 +423,15 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val)
 			break;
 		case 3: /* fan speed */
 			break;
+		case 4: /* Automatic pwm */
+			return -EINVAL;
 		}
 	}
 
 	f75375_write8(client, F75375_REG_FAN_TIMER, fanmode);
 	data->pwm_enable[nr] = val;
 	if (val == 0)
-		f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
-				data->pwm[nr]);
+		f75375_write_pwm(client, nr);
 	return 0;
 }
 
@@ -726,14 +782,17 @@ static void f75375_init(struct i2c_client *client, struct f75375_data *data,
 
 				manu = ((mode >> F75387_FAN_MANU_MODE(nr)) & 1);
 				duty = ((mode >> F75387_FAN_DUTY_MODE(nr)) & 1);
-				if (manu && duty)
-					/* speed */
+				if (!manu && duty)
+					/* auto, pwm */
+					data->pwm_enable[nr] = 4;
+				else if (manu && !duty)
+					/* manual, speed */
 					data->pwm_enable[nr] = 3;
-				else if (!manu && duty)
-					/* automatic */
+				else if (!manu && !duty)
+					/* automatic, speed */
 					data->pwm_enable[nr] = 2;
 				else
-					/* manual */
+					/* manual, pwm */
 					data->pwm_enable[nr] = 1;
 			} else {
 				if (!(conf & (1 << F75375_FAN_CTRL_LINEAR(nr))))
@@ -758,9 +817,11 @@ static void f75375_init(struct i2c_client *client, struct f75375_data *data,
 	set_pwm_enable_direct(client, 0, f75375s_pdata->pwm_enable[0]);
 	set_pwm_enable_direct(client, 1, f75375s_pdata->pwm_enable[1]);
 	for (nr = 0; nr < 2; nr++) {
+		if (auto_mode_enabled(f75375s_pdata->pwm_enable[nr]) ||
+		    !duty_mode_enabled(f75375s_pdata->pwm_enable[nr]))
+			continue;
 		data->pwm[nr] = SENSORS_LIMIT(f75375s_pdata->pwm[nr], 0, 255);
-		f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
-			data->pwm[nr]);
+		f75375_write_pwm(client, nr);
 	}
 
 }
@@ -787,7 +848,7 @@ static int f75375_probe(struct i2c_client *client,
 	if (err)
 		goto exit_free;
 
-	if (data->kind == f75375) {
+	if (data->kind != f75373) {
 		err = sysfs_chmod_file(&client->dev.kobj,
 			&sensor_dev_attr_pwm1_mode.dev_attr.attr,
 			S_IRUGO | S_IWUSR);

drivers/i2c/busses/i2c-mxs.c

@@ -72,6 +72,7 @@
 
 #define MXS_I2C_QUEUESTAT	(0x70)
 #define MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY        0x00002000
+#define MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK	0x0000001F
 
 #define MXS_I2C_QUEUECMD	(0x80)
 
@@ -219,14 +220,14 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
 	int ret;
 	int flags;
 
-	init_completion(&i2c->cmd_complete);
-
 	dev_dbg(i2c->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n",
 		msg->addr, msg->len, msg->flags, stop);
 
 	if (msg->len == 0)
 		return -EINVAL;
 
+	init_completion(&i2c->cmd_complete);
+
 	flags = stop ? MXS_I2C_CTRL0_POST_SEND_STOP : 0;
 
 	if (msg->flags & I2C_M_RD)
@@ -286,6 +287,7 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id)
 {
 	struct mxs_i2c_dev *i2c = dev_id;
 	u32 stat = readl(i2c->regs + MXS_I2C_CTRL1) & MXS_I2C_IRQ_MASK;
+	bool is_last_cmd;
 
 	if (!stat)
 		return IRQ_NONE;
@@ -300,9 +302,14 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id)
 	else
 		i2c->cmd_err = 0;
 
-	complete(&i2c->cmd_complete);
+	is_last_cmd = (readl(i2c->regs + MXS_I2C_QUEUESTAT) &
+		MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK) == 0;
+
+	if (is_last_cmd || i2c->cmd_err)
+		complete(&i2c->cmd_complete);
 
 	writel(stat, i2c->regs + MXS_I2C_CTRL1_CLR);
+
 	return IRQ_HANDLED;
 }
 

drivers/iommu/omap-iommu-debug.c

@@ -44,7 +44,8 @@ static ssize_t debug_read_ver(struct file *file, char __user *userbuf,
 static ssize_t debug_read_regs(struct file *file, char __user *userbuf,
 			       size_t count, loff_t *ppos)
 {
-	struct omap_iommu *obj = file->private_data;
+	struct device *dev = file->private_data;
+	struct omap_iommu *obj = dev_to_omap_iommu(dev);
 	char *p, *buf;
 	ssize_t bytes;
 
@@ -67,7 +68,8 @@ static ssize_t debug_read_regs(struct file *file, char __user *userbuf,
 static ssize_t debug_read_tlb(struct file *file, char __user *userbuf,
 			      size_t count, loff_t *ppos)
 {
-	struct omap_iommu *obj = file->private_data;
+	struct device *dev = file->private_data;
+	struct omap_iommu *obj = dev_to_omap_iommu(dev);
 	char *p, *buf;
 	ssize_t bytes, rest;
 
@@ -97,7 +99,8 @@ static ssize_t debug_write_pagetable(struct file *file,
 	struct iotlb_entry e;
 	struct cr_regs cr;
 	int err;
-	struct omap_iommu *obj = file->private_data;
+	struct device *dev = file->private_data;
+	struct omap_iommu *obj = dev_to_omap_iommu(dev);
 	char buf[MAXCOLUMN], *p = buf;
 
 	count = min(count, sizeof(buf));
@@ -184,7 +187,8 @@ out:
 static ssize_t debug_read_pagetable(struct file *file, char __user *userbuf,
 				    size_t count, loff_t *ppos)
 {
-	struct omap_iommu *obj = file->private_data;
+	struct device *dev = file->private_data;
+	struct omap_iommu *obj = dev_to_omap_iommu(dev);
 	char *p, *buf;
 	size_t bytes;
 
@@ -212,7 +216,8 @@ static ssize_t debug_read_pagetable(struct file *file, char __user *userbuf,
 static ssize_t debug_read_mmap(struct file *file, char __user *userbuf,
 			       size_t count, loff_t *ppos)
 {
-	struct omap_iommu *obj = file->private_data;
+	struct device *dev = file->private_data;
+	struct omap_iommu *obj = dev_to_omap_iommu(dev);
 	char *p, *buf;
 	struct iovm_struct *tmp;
 	int uninitialized_var(i);
@@ -254,7 +259,7 @@ static ssize_t debug_read_mmap(struct file *file, char __user *userbuf,
 static ssize_t debug_read_mem(struct file *file, char __user *userbuf,
 			      size_t count, loff_t *ppos)
 {
-	struct omap_iommu *obj = file->private_data;
+	struct device *dev = file->private_data;
 	char *p, *buf;
 	struct iovm_struct *area;
 	ssize_t bytes;
@@ -268,8 +273,8 @@ static ssize_t debug_read_mem(struct file *file, char __user *userbuf,
 
 	mutex_lock(&iommu_debug_lock);
 
-	area = omap_find_iovm_area(obj, (u32)ppos);
-	if (IS_ERR(area)) {
+	area = omap_find_iovm_area(dev, (u32)ppos);
+	if (!area) {
 		bytes = -EINVAL;
 		goto err_out;
 	}
@@ -287,7 +292,7 @@ err_out:
 static ssize_t debug_write_mem(struct file *file, const char __user *userbuf,
 			       size_t count, loff_t *ppos)
 {
-	struct omap_iommu *obj = file->private_data;
+	struct device *dev = file->private_data;
 	struct iovm_struct *area;
 	char *p, *buf;
 
@@ -305,8 +310,8 @@ static ssize_t debug_write_mem(struct file *file, const char __user *userbuf,
 		goto err_out;
 	}
 
-	area = omap_find_iovm_area(obj, (u32)ppos);
-	if (IS_ERR(area)) {
+	area = omap_find_iovm_area(dev, (u32)ppos);
+	if (!area) {
 		count = -EINVAL;
 		goto err_out;
 	}
@@ -350,7 +355,7 @@ DEBUG_FOPS(mem);
 	{								\
 		struct dentry *dent;					\
 		dent = debugfs_create_file(#attr, mode, parent,		\
-					   obj, &debug_##attr##_fops);	\
+					   dev, &debug_##attr##_fops);	\
 		if (!dent)						\
 			return -ENOMEM;					\
 	}
@@ -362,20 +367,29 @@ static int iommu_debug_register(struct device *dev, void *data)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct omap_iommu *obj = platform_get_drvdata(pdev);
+	struct omap_iommu_arch_data *arch_data;
 	struct dentry *d, *parent;
 
 	if (!obj || !obj->dev)
 		return -EINVAL;
 
+	arch_data = kzalloc(sizeof(*arch_data), GFP_KERNEL);
+	if (!arch_data)
+		return -ENOMEM;
+
+	arch_data->iommu_dev = obj;
+
+	dev->archdata.iommu = arch_data;
+
 	d = debugfs_create_dir(obj->name, iommu_debug_root);
 	if (!d)
-		return -ENOMEM;
+		goto nomem;
 	parent = d;
 
 	d = debugfs_create_u8("nr_tlb_entries", 400, parent,
 			      (u8 *)&obj->nr_tlb_entries);
 	if (!d)
-		return -ENOMEM;
+		goto nomem;
 
 	DEBUG_ADD_FILE_RO(ver);
 	DEBUG_ADD_FILE_RO(regs);
@@ -384,6 +398,22 @@ static int iommu_debug_register(struct device *dev, void *data)
 	DEBUG_ADD_FILE_RO(mmap);
 	DEBUG_ADD_FILE(mem);
 
+	return 0;
+
+nomem:
+	kfree(arch_data);
+	return -ENOMEM;
+}
+
+static int iommu_debug_unregister(struct device *dev, void *data)
+{
+	if (!dev->archdata.iommu)
+		return 0;
+
+	kfree(dev->archdata.iommu);
+
+	dev->archdata.iommu = NULL;
+
 	return 0;
 }
 
@@ -411,6 +441,7 @@ module_init(iommu_debug_init)
 static void __exit iommu_debugfs_exit(void)
 {
 	debugfs_remove_recursive(iommu_debug_root);
+	omap_foreach_iommu_device(NULL, iommu_debug_unregister);
 }
 module_exit(iommu_debugfs_exit)
 

drivers/iommu/omap-iommu.c

@@ -1223,7 +1223,8 @@ static int __init omap_iommu_init(void)
 
 	return platform_driver_register(&omap_iommu_driver);
 }
-module_init(omap_iommu_init);
+/* must be ready before omap3isp is probed */
+subsys_initcall(omap_iommu_init);
 
 static void __exit omap_iommu_exit(void)
 {

drivers/md/raid1.c

@@ -624,7 +624,7 @@ int md_raid1_congested(struct mddev *mddev, int bits)
 		return 1;
 
 	rcu_read_lock();
-	for (i = 0; i < conf->raid_disks; i++) {
+	for (i = 0; i < conf->raid_disks * 2; i++) {
 		struct md_rdev *rdev = rcu_dereference(conf->mirrors[i].rdev);
 		if (rdev && !test_bit(Faulty, &rdev->flags)) {
 			struct request_queue *q = bdev_get_queue(rdev->bdev);

drivers/md/raid10.c

@@ -67,6 +67,7 @@ static int max_queued_requests = 1024;
 
 static void allow_barrier(struct r10conf *conf);
 static void lower_barrier(struct r10conf *conf);
+static int enough(struct r10conf *conf, int ignore);
 
 static void * r10bio_pool_alloc(gfp_t gfp_flags, void *data)
 {
@@ -347,6 +348,19 @@ static void raid10_end_read_request(struct bio *bio, int error)
 		 * wait for the 'master' bio.
 		 */
 		set_bit(R10BIO_Uptodate, &r10_bio->state);
+	} else {
+		/* If all other devices that store this block have
+		 * failed, we want to return the error upwards rather
+		 * than fail the last device.  Here we redefine
+		 * "uptodate" to mean "Don't want to retry"
+		 */
+		unsigned long flags;
+		spin_lock_irqsave(&conf->device_lock, flags);
+		if (!enough(conf, rdev->raid_disk))
+			uptodate = 1;
+		spin_unlock_irqrestore(&conf->device_lock, flags);
+	}
+	if (uptodate) {
 		raid_end_bio_io(r10_bio);
 		rdev_dec_pending(rdev, conf->mddev);
 	} else {
@@ -2052,6 +2066,7 @@ static void fix_read_error(struct r10conf *conf, struct mddev *mddev, struct r10
 		       "md/raid10:%s: %s: Failing raid device\n",
 		       mdname(mddev), b);
 		md_error(mddev, conf->mirrors[d].rdev);
+		r10_bio->devs[r10_bio->read_slot].bio = IO_BLOCKED;
 		return;
 	}
 
@@ -2105,8 +2120,11 @@ static void fix_read_error(struct r10conf *conf, struct mddev *mddev, struct r10
 				    rdev,
 				    r10_bio->devs[r10_bio->read_slot].addr
 				    + sect,
-				    s, 0))
+				    s, 0)) {
 				md_error(mddev, rdev);
+				r10_bio->devs[r10_bio->read_slot].bio
+					= IO_BLOCKED;
+			}
 			break;
 		}
 
@@ -2299,17 +2317,20 @@ static void handle_read_error(struct mddev *mddev, struct r10bio *r10_bio)
 	 * This is all done synchronously while the array is
 	 * frozen.
 	 */
+	bio = r10_bio->devs[slot].bio;
+	bdevname(bio->bi_bdev, b);
+	bio_put(bio);
+	r10_bio->devs[slot].bio = NULL;
+
 	if (mddev->ro == 0) {
 		freeze_array(conf);
 		fix_read_error(conf, mddev, r10_bio);
 		unfreeze_array(conf);
-	}
+	} else
+		r10_bio->devs[slot].bio = IO_BLOCKED;
+
 	rdev_dec_pending(rdev, mddev);
 
-	bio = r10_bio->devs[slot].bio;
-	bdevname(bio->bi_bdev, b);
-	r10_bio->devs[slot].bio =
-		mddev->ro ? IO_BLOCKED : NULL;
 read_more:
 	rdev = read_balance(conf, r10_bio, &max_sectors);
 	if (rdev == NULL) {
@@ -2318,13 +2339,10 @@ read_more:
 		       mdname(mddev), b,
 		       (unsigned long long)r10_bio->sector);
 		raid_end_bio_io(r10_bio);
-		bio_put(bio);
 		return;
 	}
 
 	do_sync = (r10_bio->master_bio->bi_rw & REQ_SYNC);
-	if (bio)
-		bio_put(bio);
 	slot = r10_bio->read_slot;
 	printk_ratelimited(
 		KERN_ERR
@@ -2360,7 +2378,6 @@ read_more:
 			mbio->bi_phys_segments++;
 		spin_unlock_irq(&conf->device_lock);
 		generic_make_request(bio);
-		bio = NULL;
 
 		r10_bio = mempool_alloc(conf->r10bio_pool,
 					GFP_NOIO);
@@ -3243,7 +3260,6 @@ static int run(struct mddev *mddev)
 			disk->rdev = rdev;
 		}
 
-		disk->rdev = rdev;
 		disk_stack_limits(mddev->gendisk, rdev->bdev,
 				  rdev->data_offset << 9);
 		/* as we don't honour merge_bvec_fn, we must never risk

drivers/mfd/ab8500-core.c

@@ -956,11 +956,12 @@ int __devinit ab8500_init(struct ab8500 *ab8500)
 	return ret;
 
 out_freeirq:
-	if (ab8500->irq_base) {
+	if (ab8500->irq_base)
 		free_irq(ab8500->irq, ab8500);
 out_removeirq:
+	if (ab8500->irq_base)
 		ab8500_irq_remove(ab8500);
-	}
+
 	return ret;
 }
 

drivers/mfd/mfd-core.c

@@ -123,7 +123,7 @@ static int mfd_add_device(struct device *parent, int id,
 		}
 
 		if (!cell->ignore_resource_conflicts) {
-			ret = acpi_check_resource_conflict(res);
+			ret = acpi_check_resource_conflict(&res[r]);
 			if (ret)
 				goto fail_res;
 		}

drivers/mfd/s5m-core.c

@@ -105,7 +105,7 @@ static int s5m87xx_i2c_probe(struct i2c_client *i2c,
 	s5m87xx->rtc = i2c_new_dummy(i2c->adapter, RTC_I2C_ADDR);
 	i2c_set_clientdata(s5m87xx->rtc, s5m87xx);
 
-	if (pdata->cfg_pmic_irq)
+	if (pdata && pdata->cfg_pmic_irq)
 		pdata->cfg_pmic_irq();
 
 	s5m_irq_init(s5m87xx);

drivers/mfd/tps65910.c

@@ -168,7 +168,7 @@ static int tps65910_i2c_probe(struct i2c_client *i2c,
 		goto err;
 
 	init_data->irq = pmic_plat_data->irq;
-	init_data->irq_base = pmic_plat_data->irq;
+	init_data->irq_base = pmic_plat_data->irq_base;
 
 	tps65910_gpio_init(tps65910, pmic_plat_data->gpio_base);