Merge tag 'drivers-3.12' of git://git.infradead.org/linux-mvebu into next/soc

From Jason Cooper:
mvebu drivers changes for v3.12

 - MBus devicetree bindings
 - devbus update for address decoding window, cleanup

* tag 'drivers-3.12' of git://git.infradead.org/linux-mvebu: (35 commits)
  memory: mvebu-devbus: Remove unused variable
  ARM: mvebu: Relocate PCIe node in Armada 370 RD board
  ARM: mvebu: Fix AXP-WiFi-AP DT for MBUS DT binding
  ARM: mvebu: add support for the AXP WiFi AP board
  ARM: mvebu: use dts pre-processor for mv78230
  PCI: mvebu: Adapt to the new device tree layout
  bus: mvebu-mbus: Add devicetree binding
  ARM: kirkwood: Relocate PCIe device tree nodes
  ARM: kirkwood: Introduce MBUS_ID
  ARM: kirkwood: Introduce MBus DT node
  ARM: kirkwood: Use the preprocessor on device tree files
  ARM: kirkwood: Split DT and legacy MBus initialization
  ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes
  ARM: mvebu: Relocate Armada 370/XP DeviceBus device tree nodes
  ARM: mvebu: Add BootROM to Armada 370/XP device tree
  ARM: mvebu: Add MBus to Armada 370/XP device tree
  ARM: mvebu: Use the preprocessor on Armada 370/XP device tree files
  ARM: mvebu: Initialize MBus using the DT binding
  ARM: mvebu: Remove the harcoded BootROM window allocation
  bus: mvebu-mbus: Factorize Armada 370/XP data structures
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/bus/mvebu-mbus.txt

@@ -0,0 +1,276 @@
+
+* Marvell MBus
+
+Required properties:
+
+- compatible:	 Should be set to one of the following:
+		 marvell,armada370-mbus
+		 marvell,armadaxp-mbus
+		 marvell,armada370-mbus
+		 marvell,armadaxp-mbus
+		 marvell,kirkwood-mbus
+		 marvell,dove-mbus
+		 marvell,orion5x-88f5281-mbus
+		 marvell,orion5x-88f5182-mbus
+		 marvell,orion5x-88f5181-mbus
+		 marvell,orion5x-88f6183-mbus
+		 marvell,mv78xx0-mbus
+
+- address-cells: Must be '2'. The first cell for the MBus ID encoding,
+                 the second cell for the address offset within the window.
+
+- size-cells:    Must be '1'.
+
+- ranges:        Must be set up to provide a proper translation for each child.
+	         See the examples below.
+
+- controller:    Contains a single phandle referring to the MBus controller
+                 node. This allows to specify the node that contains the
+		 registers that control the MBus, which is typically contained
+		 within the internal register window (see below).
+
+Optional properties:
+
+- pcie-mem-aperture:	This optional property contains the aperture for
+			the memory region of the PCIe driver.
+			If it's defined, it must encode the base address and
+			size for the address decoding windows allocated for
+			the PCIe memory region.
+
+- pcie-io-aperture:	Just as explained for the above property, this
+			optional property contains the aperture for the
+			I/O region of the PCIe driver.
+
+* Marvell MBus controller
+
+Required properties:
+
+- compatible:	Should be set to "marvell,mbus-controller".
+
+- reg:          Device's register space.
+		Two entries are expected (see the examples below):
+		the first one controls the devices decoding window and
+		the second one controls the SDRAM decoding window.
+
+Example:
+
+	soc {
+		compatible = "marvell,armada370-mbus", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+		pcie-mem-aperture = <0xe0000000 0x8000000>;
+		pcie-io-aperture  = <0xe8000000 0x100000>;
+
+		internal-regs {
+			compatible = "simple-bus";
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>;
+			};
+
+			/* more children ...*/
+		};
+	};
+
+** MBus address decoding window specification
+
+The MBus children address space is comprised of two cells: the first one for
+the window ID and the second one for the offset within the window.
+In order to allow to describe valid and non-valid window entries, the
+following encoding is used:
+
+  0xSIAA0000 0x00oooooo
+
+Where:
+
+  S = 0x0 for a MBus valid window
+  S = 0xf for a non-valid window (see below)
+
+If S = 0x0, then:
+
+   I = 4-bit window target ID
+  AA = windpw attribute
+
+If S = 0xf, then:
+
+   I = don't care
+   AA = 1 for internal register
+
+Following the above encoding, for each ranges entry for a MBus valid window
+(S = 0x0), an address decoding window is allocated. On the other side,
+entries for translation that do not correspond to valid windows (S = 0xf)
+are skipped.
+
+	soc {
+		compatible = "marvell,armada370-mbus", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+
+		ranges = <0xf0010000 0 0 0xd0000000 0x100000
+			  0x01e00000 0 0 0xfff00000 0x100000>;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <0x01e00000 0 0x100000>;
+		};
+
+		/* other children */
+		...
+
+		internal-regs {
+			compatible = "simple-bus";
+			ranges = <0 0xf0010000 0 0x100000>;
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>;
+			};
+
+			/* more children ...*/
+		};
+	};
+
+In the shown example, the translation entry in the 'ranges' property is what
+makes the MBus driver create a static decoding window for the corresponding
+given child device. Note that the binding does not require child nodes to be
+present. Of course, child nodes are needed to probe the devices.
+
+Since each window is identified by its target ID and attribute ID there's
+a special macro that can be use to simplify the translation entries:
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+Using this macro, the above example would be:
+
+	soc {
+		compatible = "marvell,armada370-mbus", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+
+		ranges = < MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+			   MBUS_ID(0x01, 0xe0) 0 0 0xfff00000 0x100000>;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
+		};
+
+		/* other children */
+		...
+
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>;
+			};
+
+			/* other children */
+			...
+		};
+	};
+
+
+** About the window base address
+
+Remember the MBus controller allows a great deal of flexibility for choosing
+the decoding window base address. When planning the device tree layout it's
+possible to choose any address as the base address, provided of course there's
+a region large enough available, and with the required alignment.
+
+Yet in other words: there's nothing preventing us from setting a base address
+of 0xf0000000, or 0xd0000000 for the NOR device shown above, if such region is
+unused.
+
+** Window allocation policy
+
+The mbus-node ranges property defines a set of mbus windows that are expected
+to be set by the operating system and that are guaranteed to be free of overlaps
+with one another or with the system memory ranges.
+
+Each entry in the property refers to exactly one window. If the operating system
+choses to use a different set of mbus windows, it must ensure that any address
+translations performed from downstream devices are adapted accordingly.
+
+The operating system may insert additional mbus windows that do not conflict
+with the ones listed in the ranges, e.g. for mapping PCIe devices.
+As a special case, the internal register window must be set up by the boot
+loader at the address listed in the ranges property, since access to that region
+is needed to set up the other windows.
+
+** Example
+
+See the example below, where a more complete device tree is shown:
+
+	soc {
+		compatible = "marvell,armadaxp-mbus", "simple-bus";
+		controller = <&mbusc>;
+
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000   /* internal-regs */
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+		};
+
+		devbus-bootcs {
+			status = "okay";
+			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0x8000000>;
+
+			/* NOR */
+			nor {
+				compatible = "cfi-flash";
+				reg = <0 0x8000000>;
+				bank-width = <2>;
+			};
+		};
+
+		pcie-controller {
+			compatible = "marvell,armada-xp-pcie";
+			status = "okay";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000800 0 0xe0000000 MBUS_ID(0x04, 0xe8) 0xe0000000 0 0x08000000 /* Port 0.0 MEM */
+				0x81000800 0 0          MBUS_ID(0x04, 0xe0) 0xe8000000 0 0x00100000 /* Port 0.0 IO */>;
+
+
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			mbusc: mbus-controller@20000 {
+				reg = <0x20000 0x100>, <0x20180 0x20>;
+			};
+
+			interrupt-controller@20000 {
+			      reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+			};
+		};
+	};

Documentation/devicetree/bindings/pci/mvebu-pci.txt

@@ -1,6 +1,7 @@
 * Marvell EBU PCIe interfaces
 
 Mandatory properties:
+
 - compatible: one of the following values:
     marvell,armada-370-pcie
     marvell,armada-xp-pcie
@@ -10,11 +11,49 @@ Mandatory properties:
 - #interrupt-cells, set to <1>
 - bus-range: PCI bus numbers covered
 - device_type, set to "pci"
-- ranges: ranges for the PCI memory and I/O regions, as well as the
-  MMIO registers to control the PCIe interfaces.
+- ranges: ranges describing the MMIO registers to control the PCIe
+  interfaces, and ranges describing the MBus windows needed to access
+  the memory and I/O regions of each PCIe interface.
+
+The ranges describing the MMIO registers have the following layout:
+
+    0x82000000 0 r MBUS_ID(0xf0, 0x01) r 0 s
+
+where:
+
+  * r is a 32-bits value that gives the offset of the MMIO
+  registers of this PCIe interface, from the base of the internal
+  registers.
+
+  * s is a 32-bits value that give the size of this MMIO
+  registers area. This range entry translates the '0x82000000 0 r' PCI
+  address into the 'MBUS_ID(0xf0, 0x01) r' CPU address, which is part
+  of the internal register window (as identified by MBUS_ID(0xf0,
+  0x01)).
+
+The ranges describing the MBus windows have the following layout:
+
+    0x8t000000 s 0     MBUS_ID(w, a) 0 1 0
+
+where:
+
+   * t is the type of the MBus window (as defined by the standard PCI DT
+   bindings), 1 for I/O and 2 for memory.
 
-In addition, the Device Tree node must have sub-nodes describing each
+   * s is the PCI slot that corresponds to this PCIe interface
+
+   * w is the 'target ID' value for the MBus window
+
+   * a the 'attribute' value for the MBus window.
+
+Since the location and size of the different MBus windows is not fixed in
+hardware, and only determined in runtime, those ranges cover the full first
+4 GB of the physical address space, and do not translate into a valid CPU
+address.
+
+In addition, the device tree node must have sub-nodes describing each
 PCIe interface, having the following mandatory properties:
+
 - reg: used only for interrupt mapping, so only the first four bytes
   are used to refer to the correct bus number and device number.
 - assigned-addresses: reference to the MMIO registers used to control
@@ -26,7 +65,8 @@ PCIe interface, having the following mandatory properties:
 - #address-cells, set to <3>
 - #size-cells, set to <2>
 - #interrupt-cells, set to <1>
-- ranges, empty property.
+- ranges, translating the MBus windows ranges of the parent node into
+  standard PCI addresses.
 - interrupt-map-mask and interrupt-map, standard PCI properties to
   define the mapping of the PCIe interface to interrupt numbers.
 
@@ -47,27 +87,50 @@ pcie-controller {
 
 	bus-range = <0x00 0xff>;
 
-	ranges = <0x82000000 0 0xd0040000 0xd0040000 0 0x00002000   /* Port 0.0 registers */
-		  0x82000000 0 0xd0042000 0xd0042000 0 0x00002000   /* Port 2.0 registers */
-		  0x82000000 0 0xd0044000 0xd0044000 0 0x00002000   /* Port 0.1 registers */
-		  0x82000000 0 0xd0048000 0xd0048000 0 0x00002000   /* Port 0.2 registers */
-		  0x82000000 0 0xd004c000 0xd004c000 0 0x00002000   /* Port 0.3 registers */
-		  0x82000000 0 0xd0080000 0xd0080000 0 0x00002000   /* Port 1.0 registers */
-		  0x82000000 0 0xd0082000 0xd0082000 0 0x00002000   /* Port 3.0 registers */
-		  0x82000000 0 0xd0084000 0xd0084000 0 0x00002000   /* Port 1.1 registers */
-		  0x82000000 0 0xd0088000 0xd0088000 0 0x00002000   /* Port 1.2 registers */
-		  0x82000000 0 0xd008c000 0xd008c000 0 0x00002000   /* Port 1.3 registers */
-		  0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
-		  0x81000000 0 0	  0xe8000000 0 0x00100000>; /* downstream I/O */
+	ranges =
+	       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000	/* Port 0.0 registers */
+		0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000	/* Port 2.0 registers */
+		0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000	/* Port 0.1 registers */
+		0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000	/* Port 0.2 registers */
+		0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000	/* Port 0.3 registers */
+		0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000	/* Port 1.0 registers */
+		0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000	/* Port 3.0 registers */
+		0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000	/* Port 1.1 registers */
+		0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000	/* Port 1.2 registers */
+		0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000	/* Port 1.3 registers */
+		0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+		0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+		0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+		0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+		0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+		0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+		0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+		0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+
+		0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+		0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
+		0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
+		0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
+		0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
+		0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
+		0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
+		0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
+
+		0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+		0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */
+
+		0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
+		0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
 
 	pcie@1,0 {
 		device_type = "pci";
-		assigned-addresses = <0x82000800 0 0xd0040000 0 0x2000>;
+		assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
 		reg = <0x0800 0 0 0 0>;
 		#address-cells = <3>;
 		#size-cells = <2>;
 		#interrupt-cells = <1>;
-		ranges;
+		ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+			  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 		interrupt-map-mask = <0 0 0 0>;
 		interrupt-map = <0 0 0 0 &mpic 58>;
 		marvell,pcie-port = <0>;
@@ -78,12 +141,13 @@ pcie-controller {
 
 	pcie@2,0 {
 		device_type = "pci";
-		assigned-addresses = <0x82001000 0 0xd0044000 0 0x2000>;
+		assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 		reg = <0x1000 0 0 0 0>;
 		#address-cells = <3>;
 		#size-cells = <2>;
 		#interrupt-cells = <1>;
-		ranges;
+		ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+			  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 		interrupt-map-mask = <0 0 0 0>;
 		interrupt-map = <0 0 0 0 &mpic 59>;
 		marvell,pcie-port = <0>;
@@ -94,12 +158,13 @@ pcie-controller {
 
 	pcie@3,0 {
 		device_type = "pci";
-		assigned-addresses = <0x82001800 0 0xd0048000 0 0x2000>;
+		assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
 		reg = <0x1800 0 0 0 0>;
 		#address-cells = <3>;
 		#size-cells = <2>;
 		#interrupt-cells = <1>;
-		ranges;
+		ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+			  0x81000000 0 0 0x81000000 0x3 0 1 0>;
 		interrupt-map-mask = <0 0 0 0>;
 		interrupt-map = <0 0 0 0 &mpic 60>;
 		marvell,pcie-port = <0>;
@@ -110,12 +175,13 @@ pcie-controller {
 
 	pcie@4,0 {
 		device_type = "pci";
-		assigned-addresses = <0x82002000 0 0xd004c000 0 0x2000>;
+		assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
 		reg = <0x2000 0 0 0 0>;
 		#address-cells = <3>;
 		#size-cells = <2>;
 		#interrupt-cells = <1>;
-		ranges;
+		ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+			  0x81000000 0 0 0x81000000 0x4 0 1 0>;
 		interrupt-map-mask = <0 0 0 0>;
 		interrupt-map = <0 0 0 0 &mpic 61>;
 		marvell,pcie-port = <0>;
@@ -126,12 +192,13 @@ pcie-controller {
 
 	pcie@5,0 {
 		device_type = "pci";
-		assigned-addresses = <0x82002800 0 0xd0080000 0 0x2000>;
+		assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 		reg = <0x2800 0 0 0 0>;
 		#address-cells = <3>;
 		#size-cells = <2>;
 		#interrupt-cells = <1>;
-		ranges;
+		ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+			  0x81000000 0 0 0x81000000 0x5 0 1 0>;
 		interrupt-map-mask = <0 0 0 0>;
 		interrupt-map = <0 0 0 0 &mpic 62>;
 		marvell,pcie-port = <1>;
@@ -142,12 +209,13 @@ pcie-controller {
 
 	pcie@6,0 {
 		device_type = "pci";
-		assigned-addresses = <0x82003000 0 0xd0084000 0 0x2000>;
+		assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
 		reg = <0x3000 0 0 0 0>;
 		#address-cells = <3>;
 		#size-cells = <2>;
 		#interrupt-cells = <1>;
-		ranges;
+		ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
+			  0x81000000 0 0 0x81000000 0x6 0 1 0>;
 		interrupt-map-mask = <0 0 0 0>;
 		interrupt-map = <0 0 0 0 &mpic 63>;
 		marvell,pcie-port = <1>;
@@ -158,12 +226,13 @@ pcie-controller {
 
 	pcie@7,0 {
 		device_type = "pci";
-		assigned-addresses = <0x82003800 0 0xd0088000 0 0x2000>;
+		assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
 		reg = <0x3800 0 0 0 0>;
 		#address-cells = <3>;
 		#size-cells = <2>;
 		#interrupt-cells = <1>;
-		ranges;
+		ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
+			  0x81000000 0 0 0x81000000 0x7 0 1 0>;
 		interrupt-map-mask = <0 0 0 0>;
 		interrupt-map = <0 0 0 0 &mpic 64>;
 		marvell,pcie-port = <1>;
@@ -174,12 +243,13 @@ pcie-controller {
 
 	pcie@8,0 {
 		device_type = "pci";
-		assigned-addresses = <0x82004000 0 0xd008c000 0 0x2000>;
+		assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
 		reg = <0x4000 0 0 0 0>;
 		#address-cells = <3>;
 		#size-cells = <2>;
 		#interrupt-cells = <1>;
-		ranges;
+		ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
+			  0x81000000 0 0 0x81000000 0x8 0 1 0>;
 		interrupt-map-mask = <0 0 0 0>;
 		interrupt-map = <0 0 0 0 &mpic 65>;
 		marvell,pcie-port = <1>;
@@ -187,14 +257,16 @@ pcie-controller {
 		clocks = <&gateclk 12>;
 		status = "disabled";
 	};
+
 	pcie@9,0 {
 		device_type = "pci";
-		assigned-addresses = <0x82004800 0 0xd0042000 0 0x2000>;
+		assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
 		reg = <0x4800 0 0 0 0>;
 		#address-cells = <3>;
 		#size-cells = <2>;
 		#interrupt-cells = <1>;
-		ranges;
+		ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+			  0x81000000 0 0 0x81000000 0x9 0 1 0>;
 		interrupt-map-mask = <0 0 0 0>;
 		interrupt-map = <0 0 0 0 &mpic 99>;
 		marvell,pcie-port = <2>;
@@ -205,12 +277,13 @@ pcie-controller {
 
 	pcie@10,0 {
 		device_type = "pci";
-		assigned-addresses = <0x82005000 0 0xd0082000 0 0x2000>;
+		assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
 		reg = <0x5000 0 0 0 0>;
 		#address-cells = <3>;
 		#size-cells = <2>;
 		#interrupt-cells = <1>;
-		ranges;
+		ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
+			  0x81000000 0 0 0x81000000 0xa 0 1 0>;
 		interrupt-map-mask = <0 0 0 0>;
 		interrupt-map = <0 0 0 0 &mpic 103>;
 		marvell,pcie-port = <3>;

arch/arm/boot/dts/Makefile

@@ -101,6 +101,7 @@ dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
 dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
 	armada-370-mirabox.dtb \
 	armada-370-rd.dtb \
+	armada-xp-axpwifiap.dtb \
 	armada-xp-db.dtb \
 	armada-xp-gp.dtb \
 	armada-xp-openblocks-ax3-4.dtb

arch/arm/boot/dts/armada-370-db.dts

@@ -14,7 +14,7 @@
  */
 
 /dts-v1/;
-/include/ "armada-370.dtsi"
+#include "armada-370.dtsi"
 
 / {
 	model = "Marvell Armada 370 Evaluation Board";
@@ -30,6 +30,9 @@
 	};
 
 	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
 		internal-regs {
 			serial@12000 {
 				clock-frequency = <200000000>;

arch/arm/boot/dts/armada-370-mirabox.dts

@@ -9,7 +9,7 @@
  */
 
 /dts-v1/;
-/include/ "armada-370.dtsi"
+#include "armada-370.dtsi"
 
 / {
 	model = "Globalscale Mirabox";
@@ -25,6 +25,25 @@
 	};
 
 	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* Internal mini-PCIe connector */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* Connected on the PCB to a USB 3.0 XHCI controller */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
 		internal-regs {
 			serial@12000 {
 				clock-frequency = <200000000>;
@@ -120,22 +139,6 @@
 					reg = <0x25>;
 				};
 			};
-
-			pcie-controller {
-				status = "okay";
-
-				/* Internal mini-PCIe connector */
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-
-				/* Connected on the PCB to a USB 3.0 XHCI controller */
-				pcie@2,0 {
-					/* Port 1, Lane 0 */
-					status = "okay";
-				};
-			};
 		};
 	};
 };

arch/arm/boot/dts/armada-370-rd.dts

@@ -12,7 +12,7 @@
  */
 
 /dts-v1/;
-/include/ "armada-370.dtsi"
+#include "armada-370.dtsi"
 
 / {
 	model = "Marvell Armada 370 Reference Design";
@@ -28,6 +28,25 @@
 	};
 
 	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* Internal mini-PCIe connector */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* Internal mini-PCIe connector */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
 		internal-regs {
 			serial@12000 {
 				clock-frequency = <200000000>;
@@ -85,22 +104,6 @@
 					gpios = <&gpio0 6 1>;
 				};
 			};
-
-			pcie-controller {
-				status = "okay";
-
-				/* Internal mini-PCIe connector */
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-
-				/* Internal mini-PCIe connector */
-				pcie@2,0 {
-					/* Port 1, Lane 0 */
-					status = "okay";
-				};
-			};
 		};
 	};
  };

arch/arm/boot/dts/armada-370-xp.dtsi

@@ -18,6 +18,8 @@
 
 /include/ "skeleton64.dtsi"
 
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
 / {
 	model = "Marvell Armada 370 and XP SoC";
 	compatible = "marvell,armada-370-xp";
@@ -38,18 +40,73 @@
 	};
 
 	soc {
-		#address-cells = <1>;
+		#address-cells = <2>;
 		#size-cells = <1>;
-		compatible = "simple-bus";
+		controller = <&mbusc>;
 		interrupt-parent = <&mpic>;
-		ranges = <0          0 0xd0000000 0x0100000 /* internal registers */
-			  0xe0000000 0 0xe0000000 0x8100000 /* PCIe */>;
+		pcie-mem-aperture = <0xe0000000 0x8000000>;
+		pcie-io-aperture  = <0xe8000000 0x100000>;
+
+		devbus-bootcs {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs0 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs1 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs2 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs3 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
 
 		internal-regs {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>;
+			};
 
 			mpic: interrupt-controller@20000 {
 				compatible = "marvell,mpic";
@@ -195,50 +252,6 @@
 				status = "disabled";
 			};
 
-			devbus-bootcs@10400 {
-				compatible = "marvell,mvebu-devbus";
-				reg = <0x10400 0x8>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			devbus-cs0@10408 {
-				compatible = "marvell,mvebu-devbus";
-				reg = <0x10408 0x8>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			devbus-cs1@10410 {
-				compatible = "marvell,mvebu-devbus";
-				reg = <0x10410 0x8>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			devbus-cs2@10418 {
-				compatible = "marvell,mvebu-devbus";
-				reg = <0x10418 0x8>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			devbus-cs3@10420 {
-				compatible = "marvell,mvebu-devbus";
-				reg = <0x10420 0x8>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
 		};
 	};
  };

arch/arm/boot/dts/armada-370.dtsi

@@ -15,7 +15,7 @@
  * common to all Armada SoCs.
  */
 
-/include/ "armada-370-xp.dtsi"
+#include "armada-370-xp.dtsi"
 /include/ "skeleton.dtsi"
 
 / {
@@ -29,8 +29,66 @@
 	};
 
 	soc {
-		ranges = <0          0xd0000000 0x0100000 /* internal registers */
-			  0xe0000000 0xe0000000 0x8100000 /* PCIe */>;
+		compatible = "marvell,armada370-mbus", "simple-bus";
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
+		};
+
+		pcie-controller {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x08, 0xe8) 0       1 0 /* Port 1.0 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x08, 0xe0) 0       1 0 /* Port 1.0 IO  */>;
+
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+                                ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+                                          0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 58>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+                                ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+                                          0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 62>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+		};
+
 		internal-regs {
 			system-controller@18200 {
 				compatible = "marvell,armada-370-xp-system-controller";
@@ -169,54 +227,6 @@
 					0x18304 0x4>;
 				status = "okay";
 			};
-
-			pcie-controller {
-				compatible = "marvell,armada-370-pcie";
-				status = "disabled";
-				device_type = "pci";
-
-				#address-cells = <3>;
-				#size-cells = <2>;
-
-				bus-range = <0x00 0xff>;
-
-				ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000   /* Port 0.0 registers */
-					0x82000000 0 0x80000 0x80000 0 0x00002000   /* Port 1.0 registers */
-					0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
-					0x81000000 0 0          0xe8000000 0 0x00100000>; /* downstream I/O */
-
-				pcie@1,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-					reg = <0x0800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 58>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 5>;
-					status = "disabled";
-				};
-
-				pcie@2,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
-					reg = <0x1000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 62>;
-					marvell,pcie-port = <1>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 9>;
-					status = "disabled";
-				};
-			};
 		};
 	};
 };

arch/arm/boot/dts/armada-xp-axpwifiap.dts

@@ -0,0 +1,164 @@
+/*
+ * Device Tree file for Marvell RD-AXPWiFiAP.
+ *
+ * Note: this board is shipped with a new generation boot loader that
+ * remaps internal registers at 0xf1000000. Therefore, if earlyprintk
+ * is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be
+ * used.
+ *
+ * Copyright (C) 2013 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+	model = "Marvell RD-AXPWiFiAP";
+	compatible = "marvell,rd-axpwifiap", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x40000000>; /* 1GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* First mini-PCIe port */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* Second mini-PCIe port */
+			pcie@2,0 {
+				/* Port 0, Lane 1 */
+				status = "okay";
+			};
+
+			/* Renesas uPD720202 USB 3.0 controller */
+			pcie@3,0 {
+				/* Port 0, Lane 3 */
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			pinctrl {
+				pinctrl-0 = <&pmx_phy_int>;
+				pinctrl-names = "default";
+
+				pmx_ge0: pmx-ge0 {
+					marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
+						       "mpp4", "mpp5", "mpp6", "mpp7",
+						       "mpp8", "mpp9", "mpp10", "mpp11";
+					marvell,function = "ge0";
+				};
+
+				pmx_ge1: pmx-ge1 {
+					marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15",
+						       "mpp16", "mpp17", "mpp18", "mpp19",
+						       "mpp20", "mpp21", "mpp22", "mpp23";
+					marvell,function = "ge1";
+				};
+
+				pmx_keys: pmx-keys {
+					marvell,pins = "mpp33";
+					marvell,function = "gpio";
+				};
+
+				pmx_spi: pmx-spi {
+					marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39";
+					marvell,function = "spi";
+				};
+
+				pmx_phy_int: pmx-phy-int {
+					marvell,pins = "mpp32";
+					marvell,function = "gpio";
+				};
+			};
+
+			serial@12000 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+
+			serial@12100 {
+				clock-frequency = <250000000>;
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <1>;
+				status = "okay";
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			ethernet@70000 {
+				pinctrl-0 = <&pmx_ge0>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@74000 {
+				pinctrl-0 = <&pmx_ge1>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			spi0: spi@10600 {
+				status = "okay";
+				pinctrl-0 = <&pmx_spi>;
+				pinctrl-names = "default";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "n25q128a13";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <108000000>;
+				};
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_keys>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "Factory Reset Button";
+			linux,code = <141>; /* KEY_SETUP */
+			gpios = <&gpio1 1 1>;
+		};
+	};
+};

arch/arm/boot/dts/armada-xp-db.dts

@@ -14,7 +14,7 @@
  */
 
 /dts-v1/;
-/include/ "armada-xp-mv78460.dtsi"
+#include "armada-xp-mv78460.dtsi"
 
 / {
 	model = "Marvell Armada XP Evaluation Board";
@@ -30,9 +30,70 @@
 	};
 
 	soc {
-		ranges = <0          0 0xd0000000 0x100000	/* Internal registers 1MiB */
-			  0xe0000000 0 0xe0000000 0x8100000     /* PCIe */
-			  0xf0000000 0 0xf0000000 0x1000000>;	/* Device Bus, NOR 16MiB   */
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
+
+		devbus-bootcs {
+			status = "okay";
+
+			/* Device Bus parameters are required */
+
+			/* Read parameters */
+			devbus,bus-width    = <8>;
+			devbus,turn-off-ps  = <60000>;
+			devbus,badr-skew-ps = <0>;
+			devbus,acc-first-ps = <124000>;
+			devbus,acc-next-ps  = <248000>;
+			devbus,rd-setup-ps  = <0>;
+			devbus,rd-hold-ps   = <0>;
+
+			/* Write parameters */
+			devbus,sync-enable = <0>;
+			devbus,wr-high-ps  = <60000>;
+			devbus,wr-low-ps   = <60000>;
+			devbus,ale-wr-ps   = <60000>;
+
+			/* NOR 16 MiB */
+			nor@0 {
+				compatible = "cfi-flash";
+				reg = <0 0x1000000>;
+				bank-width = <2>;
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+
+			/*
+			 * All 6 slots are physically present as
+			 * standard PCIe slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+			pcie@2,0 {
+				/* Port 0, Lane 1 */
+				status = "okay";
+			};
+			pcie@3,0 {
+				/* Port 0, Lane 2 */
+				status = "okay";
+			};
+			pcie@4,0 {
+				/* Port 0, Lane 3 */
+				status = "okay";
+			};
+			pcie@9,0 {
+				/* Port 2, Lane 0 */
+				status = "okay";
+			};
+			pcie@10,0 {
+				/* Port 3, Lane 0 */
+				status = "okay";
+			};
+		};
 
 		internal-regs {
 			serial@12000 {
@@ -127,68 +188,6 @@
 					spi-max-frequency = <20000000>;
 				};
 			};
-
-			pcie-controller {
-				status = "okay";
-
-				/*
-				 * All 6 slots are physically present as
-				 * standard PCIe slots on the board.
-				 */
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-				pcie@2,0 {
-					/* Port 0, Lane 1 */
-					status = "okay";
-				};
-				pcie@3,0 {
-					/* Port 0, Lane 2 */
-					status = "okay";
-				};
-				pcie@4,0 {
-					/* Port 0, Lane 3 */
-					status = "okay";
-				};
-				pcie@9,0 {
-					/* Port 2, Lane 0 */
-					status = "okay";
-				};
-				pcie@10,0 {
-					/* Port 3, Lane 0 */
-					status = "okay";
-				};
-			};
-
-			devbus-bootcs@10400 {
-				status = "okay";
-				ranges = <0 0xf0000000 0x1000000>;
-
-				/* Device Bus parameters are required */
-
-				/* Read parameters */
-				devbus,bus-width    = <8>;
-				devbus,turn-off-ps  = <60000>;
-				devbus,badr-skew-ps = <0>;
-				devbus,acc-first-ps = <124000>;
-				devbus,acc-next-ps  = <248000>;
-				devbus,rd-setup-ps  = <0>;
-				devbus,rd-hold-ps   = <0>;
-
-				/* Write parameters */
-				devbus,sync-enable = <0>;
-				devbus,wr-high-ps  = <60000>;
-				devbus,wr-low-ps   = <60000>;
-				devbus,ale-wr-ps   = <60000>;
-
-				/* NOR 16 MiB */
-				nor@0 {
-					compatible = "cfi-flash";
-					reg = <0 0x1000000>;
-					bank-width = <2>;
-				};
-			};
 		};
 	};
 };

arch/arm/boot/dts/armada-xp-gp.dts

@@ -14,7 +14,7 @@
  */
 
 /dts-v1/;
-/include/ "armada-xp-mv78460.dtsi"
+#include "armada-xp-mv78460.dtsi"
 
 / {
 	model = "Marvell Armada XP Development Board DB-MV784MP-GP";
@@ -39,9 +39,58 @@
 	};
 
 	soc {
-		ranges = <0          0 0xd0000000 0x100000  /* Internal registers 1MiB */
-			  0xe0000000 0 0xe0000000 0x8100000 /* PCIe */
-			  0xf0000000 0 0xf0000000 0x1000000 /* Device Bus, NOR 16MiB  */>;
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
+
+		devbus-bootcs {
+			status = "okay";
+
+			/* Device Bus parameters are required */
+
+			/* Read parameters */
+			devbus,bus-width    = <8>;
+			devbus,turn-off-ps  = <60000>;
+			devbus,badr-skew-ps = <0>;
+			devbus,acc-first-ps = <124000>;
+			devbus,acc-next-ps  = <248000>;
+			devbus,rd-setup-ps  = <0>;
+			devbus,rd-hold-ps   = <0>;
+
+			/* Write parameters */
+			devbus,sync-enable = <0>;
+			devbus,wr-high-ps  = <60000>;
+			devbus,wr-low-ps   = <60000>;
+			devbus,ale-wr-ps   = <60000>;
+
+			/* NOR 16 MiB */
+			nor@0 {
+				compatible = "cfi-flash";
+				reg = <0 0x1000000>;
+				bank-width = <2>;
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+
+			/*
+			 * The 3 slots are physically present as
+			 * standard PCIe slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+			pcie@9,0 {
+				/* Port 2, Lane 0 */
+				status = "okay";
+			};
+			pcie@10,0 {
+				/* Port 3, Lane 0 */
+				status = "okay";
+			};
+		};
 
 		internal-regs {
 			serial@12000 {
@@ -126,56 +175,6 @@
 					spi-max-frequency = <108000000>;
 				};
 			};
-
-			devbus-bootcs@10400 {
-				status = "okay";
-				ranges = <0 0xf0000000 0x1000000>; /* @addr 0xf000000, size 0x1000000 */
-
-				/* Device Bus parameters are required */
-
-				/* Read parameters */
-				devbus,bus-width    = <8>;
-				devbus,turn-off-ps  = <60000>;
-				devbus,badr-skew-ps = <0>;
-				devbus,acc-first-ps = <124000>;
-				devbus,acc-next-ps  = <248000>;
-				devbus,rd-setup-ps  = <0>;
-				devbus,rd-hold-ps   = <0>;
-
-				/* Write parameters */
-				devbus,sync-enable = <0>;
-				devbus,wr-high-ps  = <60000>;
-				devbus,wr-low-ps   = <60000>;
-				devbus,ale-wr-ps   = <60000>;
-
-				/* NOR 16 MiB */
-				nor@0 {
-					compatible = "cfi-flash";
-					reg = <0 0x1000000>;
-					bank-width = <2>;
-				};
-			};
-
-			pcie-controller {
-				status = "okay";
-
-				/*
-				 * The 3 slots are physically present as
-				 * standard PCIe slots on the board.
-				 */
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-				pcie@9,0 {
-					/* Port 2, Lane 0 */
-					status = "okay";
-				};
-				pcie@10,0 {
-					/* Port 3, Lane 0 */
-					status = "okay";
-				};
-			};
 		};
 	};
 };

arch/arm/boot/dts/armada-xp-mv78230.dtsi

@@ -13,7 +13,7 @@
  * common to all Armada XP SoCs.
  */
 
-/include/ "armada-xp.dtsi"
+#include "armada-xp.dtsi"
 
 / {
 	model = "Marvell Armada XP MV78230 SoC";
@@ -44,6 +44,124 @@
 	};
 
 	soc {
+		/*
+		 * MV78230 has 2 PCIe units Gen2.0: One unit can be
+		 * configured as x4 or quad x1 lanes. One unit is
+		 * x4/x1.
+		 */
+		pcie-controller {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+				0x82000000 0x3 0       MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+				0x81000000 0x3 0       MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+				0x82000000 0x4 0       MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+				0x81000000 0x4 0       MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+				0x82000000 0x9 0       MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+				0x81000000 0x9 0       MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
+
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 58>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 59>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+			pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 60>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+			};
+
+			pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 61>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			pcie@9,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+				reg = <0x4800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 99>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 26>;
+				status = "disabled";
+			};
+		};
+
 		internal-regs {
 			pinctrl {
 				compatible = "marvell,mv78230-pinctrl";
@@ -77,110 +195,6 @@
 				#interrupts-cells = <2>;
 				interrupts = <87>, <88>, <89>;
 			};
-
-			/*
-			 * MV78230 has 2 PCIe units Gen2.0: One unit can be
-			 * configured as x4 or quad x1 lanes. One unit is
-			 * x4/x1.
-			 */
-			pcie-controller {
-				compatible = "marvell,armada-xp-pcie";
-				status = "disabled";
-				device_type = "pci";
-
-#address-cells = <3>;
-#size-cells = <2>;
-
-				bus-range = <0x00 0xff>;
-
-				ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000   /* Port 0.0 registers */
-					0x82000000 0 0x42000 0x42000 0 0x00002000   /* Port 2.0 registers */
-					0x82000000 0 0x44000 0x44000 0 0x00002000   /* Port 0.1 registers */
-					0x82000000 0 0x48000 0x48000 0 0x00002000   /* Port 0.2 registers */
-					0x82000000 0 0x4c000 0x4c000 0 0x00002000   /* Port 0.3 registers */
-					0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
-					0x81000000 0 0	  0xe8000000 0 0x00100000>; /* downstream I/O */
-
-				pcie@1,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-					reg = <0x0800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 58>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 5>;
-					status = "disabled";
-				};
-
-				pcie@2,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-					reg = <0x1000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 59>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <1>;
-					clocks = <&gateclk 6>;
-					status = "disabled";
-				};
-
-				pcie@3,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-					reg = <0x1800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 60>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <2>;
-					clocks = <&gateclk 7>;
-					status = "disabled";
-				};
-
-				pcie@4,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
-					reg = <0x2000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 61>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <3>;
-					clocks = <&gateclk 8>;
-					status = "disabled";
-				};
-
-				pcie@9,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
-					reg = <0x4800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 99>;
-					marvell,pcie-port = <2>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 26>;
-					status = "disabled";
-				};
-			};
 		};
 	};
 };

arch/arm/boot/dts/armada-xp-mv78260.dtsi

@@ -13,7 +13,7 @@
  * common to all Armada XP SoCs.
  */
 
-/include/ "armada-xp.dtsi"
+#include "armada-xp.dtsi"
 
 / {
 	model = "Marvell Armada XP MV78260 SoC";
@@ -45,6 +45,145 @@
 	};
 
 	soc {
+		/*
+		 * MV78260 has 3 PCIe units Gen2.0: Two units can be
+		 * configured as x4 or quad x1 lanes. One unit is
+		 * x4/x1.
+		 */
+		pcie-controller {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
+				0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000   /* Port 3.0 registers */
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+				0x82000000 0x9 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x9 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
+				0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
+				0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
+
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 58>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+                                ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+                                          0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 59>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+			pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 60>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+			};
+
+			pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 61>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			pcie@9,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+				reg = <0x4800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 99>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 26>;
+				status = "disabled";
+			};
+
+			pcie@10,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x82000 0 0x2000>;
+				reg = <0x5000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
+					  0x81000000 0 0 0x81000000 0xa 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 103>;
+				marvell,pcie-port = <3>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 27>;
+				status = "disabled";
+			};
+		};
+
 		internal-regs {
 			pinctrl {
 				compatible = "marvell,mv78260-pinctrl";
@@ -97,128 +236,6 @@
 				clocks = <&gateclk 1>;
 				status = "disabled";
 			};
-
-			/*
-			 * MV78260 has 3 PCIe units Gen2.0: Two units can be
-			 * configured as x4 or quad x1 lanes. One unit is
-			 * x4/x1.
-			 */
-			pcie-controller {
-				compatible = "marvell,armada-xp-pcie";
-				status = "disabled";
-				device_type = "pci";
-
-				#address-cells = <3>;
-				#size-cells = <2>;
-
-				bus-range = <0x00 0xff>;
-
-				ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000   /* Port 0.0 registers */
-					0x82000000 0 0x42000 0x42000 0 0x00002000   /* Port 2.0 registers */
-					0x82000000 0 0x44000 0x44000 0 0x00002000   /* Port 0.1 registers */
-					0x82000000 0 0x48000 0x48000 0 0x00002000   /* Port 0.2 registers */
-					0x82000000 0 0x4c000 0x4c000 0 0x00002000   /* Port 0.3 registers */
-					0x82000000 0 0x80000 0x80000 0 0x00002000   /* Port 1.0 registers */
-					0x82000000 0 0x82000 0x82000 0 0x00002000   /* Port 3.0 registers */
-					0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
-					0x81000000 0 0	  0xe8000000 0 0x00100000>; /* downstream I/O */
-
-				pcie@1,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-					reg = <0x0800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 58>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 5>;
-					status = "disabled";
-				};
-
-				pcie@2,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-					reg = <0x1000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 59>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <1>;
-					clocks = <&gateclk 6>;
-					status = "disabled";
-				};
-
-				pcie@3,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-					reg = <0x1800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 60>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <2>;
-					clocks = <&gateclk 7>;
-					status = "disabled";
-				};
-
-				pcie@4,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
-					reg = <0x2000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 61>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <3>;
-					clocks = <&gateclk 8>;
-					status = "disabled";
-				};
-
-				pcie@9,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
-					reg = <0x4800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 99>;
-					marvell,pcie-port = <2>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 26>;
-					status = "disabled";
-				};
-
-				pcie@10,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x82000 0 0x2000>;
-					reg = <0x5000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 103>;
-					marvell,pcie-port = <3>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 27>;
-					status = "disabled";
-				};
-			};
 		};
 	};
 };

arch/arm/boot/dts/armada-xp-mv78460.dtsi

@@ -13,7 +13,7 @@
  * common to all Armada XP SoCs.
  */
 
-/include/ "armada-xp.dtsi"
+#include "armada-xp.dtsi"
 
 / {
 	model = "Marvell Armada XP MV78460 SoC";
@@ -61,6 +61,227 @@
 	};
 
 	soc {
+		/*
+		 * MV78460 has 4 PCIe units Gen2.0: Two units can be
+		 * configured as x4 or quad x1 lanes. Two units are
+		 * x4/x1.
+		 */
+		pcie-controller {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
+				0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000   /* Port 3.0 registers */
+				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
+				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
+				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+
+				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
+				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
+				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
+				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
+				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
+				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
+				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
+
+				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */
+
+				0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
+				0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
+
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 58>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 59>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+			pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 60>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+			};
+
+			pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 61>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			pcie@5,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				reg = <0x2800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 62>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+
+			pcie@6,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
+				reg = <0x3000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
+					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 63>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 10>;
+				status = "disabled";
+			};
+
+			pcie@7,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
+				reg = <0x3800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
+					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 64>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 11>;
+				status = "disabled";
+			};
+
+			pcie@8,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
+				reg = <0x4000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
+					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 65>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 12>;
+				status = "disabled";
+			};
+
+			pcie@9,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
+				reg = <0x4800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 99>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 26>;
+				status = "disabled";
+			};
+
+			pcie@10,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
+				reg = <0x5000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
+					  0x81000000 0 0 0x81000000 0xa 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 103>;
+				marvell,pcie-port = <3>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 27>;
+				status = "disabled";
+			};
+		};
+
 		internal-regs {
 			pinctrl {
 				compatible = "marvell,mv78460-pinctrl";
@@ -113,194 +334,6 @@
 				clocks = <&gateclk 1>;
 				status = "disabled";
 			};
-
-			/*
-			 * MV78460 has 4 PCIe units Gen2.0: Two units can be
-			 * configured as x4 or quad x1 lanes. Two units are
-			 * x4/x1.
-			 */
-			pcie-controller {
-				compatible = "marvell,armada-xp-pcie";
-				status = "disabled";
-				device_type = "pci";
-
-				#address-cells = <3>;
-				#size-cells = <2>;
-
-				bus-range = <0x00 0xff>;
-
-				ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000   /* Port 0.0 registers */
-					0x82000000 0 0x42000 0x42000 0 0x00002000   /* Port 2.0 registers */
-					0x82000000 0 0x44000 0x44000 0 0x00002000   /* Port 0.1 registers */
-					0x82000000 0 0x48000 0x48000 0 0x00002000   /* Port 0.2 registers */
-					0x82000000 0 0x4c000 0x4c000 0 0x00002000   /* Port 0.3 registers */
-					0x82000000 0 0x80000 0x80000 0 0x00002000   /* Port 1.0 registers */
-					0x82000000 0 0x82000 0x82000 0 0x00002000   /* Port 3.0 registers */
-					0x82000000 0 0x84000 0x84000 0 0x00002000   /* Port 1.1 registers */
-					0x82000000 0 0x88000 0x88000 0 0x00002000   /* Port 1.2 registers */
-					0x82000000 0 0x8c000 0x8c000 0 0x00002000   /* Port 1.3 registers */
-					0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
-					0x81000000 0 0	  0xe8000000 0 0x00100000>; /* downstream I/O */
-
-				pcie@1,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-					reg = <0x0800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 58>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 5>;
-					status = "disabled";
-				};
-
-				pcie@2,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
-					reg = <0x1000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 59>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <1>;
-					clocks = <&gateclk 6>;
-					status = "disabled";
-				};
-
-				pcie@3,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
-					reg = <0x1800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 60>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <2>;
-					clocks = <&gateclk 7>;
-					status = "disabled";
-				};
-
-				pcie@4,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
-					reg = <0x2000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 61>;
-					marvell,pcie-port = <0>;
-					marvell,pcie-lane = <3>;
-					clocks = <&gateclk 8>;
-					status = "disabled";
-				};
-
-				pcie@5,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
-					reg = <0x2800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 62>;
-					marvell,pcie-port = <1>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 9>;
-					status = "disabled";
-				};
-
-				pcie@6,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
-					reg = <0x3000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 63>;
-					marvell,pcie-port = <1>;
-					marvell,pcie-lane = <1>;
-					clocks = <&gateclk 10>;
-					status = "disabled";
-				};
-
-				pcie@7,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
-					reg = <0x3800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 64>;
-					marvell,pcie-port = <1>;
-					marvell,pcie-lane = <2>;
-					clocks = <&gateclk 11>;
-					status = "disabled";
-				};
-
-				pcie@8,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
-					reg = <0x4000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 65>;
-					marvell,pcie-port = <1>;
-					marvell,pcie-lane = <3>;
-					clocks = <&gateclk 12>;
-					status = "disabled";
-				};
-				pcie@9,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
-					reg = <0x4800 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 99>;
-					marvell,pcie-port = <2>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 26>;
-					status = "disabled";
-				};
-
-				pcie@10,0 {
-					device_type = "pci";
-					assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
-					reg = <0x5000 0 0 0 0>;
-					#address-cells = <3>;
-					#size-cells = <2>;
-					#interrupt-cells = <1>;
-					ranges;
-					interrupt-map-mask = <0 0 0 0>;
-					interrupt-map = <0 0 0 0 &mpic 103>;
-					marvell,pcie-port = <3>;
-					marvell,pcie-lane = <0>;
-					clocks = <&gateclk 27>;
-					status = "disabled";
-				};
-			};
 		};
 	};
 };

arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts

@@ -11,7 +11,7 @@
  */
 
 /dts-v1/;
-/include/ "armada-xp-mv78260.dtsi"
+#include "armada-xp-mv78260.dtsi"
 
 / {
 	model = "PlatHome OpenBlocks AX3-4 board";
@@ -27,9 +27,46 @@
 	};
 
 	soc {
-		ranges = <0          0 0xd0000000 0x100000	/* Internal registers 1MiB */
-			  0xe0000000 0 0xe0000000 0x8100000     /* PCIe */
-			  0xf0000000 0 0xf0000000 0x8000000     /* Device Bus, NOR 128MiB   */>;
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>;
+
+		devbus-bootcs {
+			status = "okay";
+
+			/* Device Bus parameters are required */
+
+			/* Read parameters */
+			devbus,bus-width    = <8>;
+			devbus,turn-off-ps  = <60000>;
+			devbus,badr-skew-ps = <0>;
+			devbus,acc-first-ps = <124000>;
+			devbus,acc-next-ps  = <248000>;
+			devbus,rd-setup-ps  = <0>;
+			devbus,rd-hold-ps   = <0>;
+
+			/* Write parameters */
+			devbus,sync-enable = <0>;
+			devbus,wr-high-ps  = <60000>;
+			devbus,wr-low-ps   = <60000>;
+			devbus,ale-wr-ps   = <60000>;
+
+			/* NOR 128 MiB */
+			nor@0 {
+				compatible = "cfi-flash";
+				reg = <0 0x8000000>;
+				bank-width = <2>;
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+			/* Internal mini-PCIe connector */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+		};
 
 		internal-regs {
 			serial@12000 {
@@ -148,49 +185,6 @@
 			usb@51000 {
 				status = "okay";
 			};
-
-			/* USB interface in the mini-PCIe connector */
-			usb@52000 {
-				status = "okay";
-			};
-
-			devbus-bootcs@10400 {
-				status = "okay";
-				ranges = <0 0xf0000000 0x8000000>; /* @addr 0xf000000, size 0x8000000 */
-
-				/* Device Bus parameters are required */
-
-				/* Read parameters */
-				devbus,bus-width    = <8>;
-				devbus,turn-off-ps  = <60000>;
-				devbus,badr-skew-ps = <0>;
-				devbus,acc-first-ps = <124000>;
-				devbus,acc-next-ps  = <248000>;
-				devbus,rd-setup-ps  = <0>;
-				devbus,rd-hold-ps   = <0>;
-
-				/* Write parameters */
-				devbus,sync-enable = <0>;
-				devbus,wr-high-ps  = <60000>;
-				devbus,wr-low-ps   = <60000>;
-				devbus,ale-wr-ps   = <60000>;
-
-				/* NOR 128 MiB */
-				nor@0 {
-					compatible = "cfi-flash";
-					reg = <0 0x8000000>;
-					bank-width = <2>;
-				};
-			};
-
-			pcie-controller {
-				status = "okay";
-				/* Internal mini-PCIe connector */
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-			};
 		};
 	};
 };

arch/arm/boot/dts/armada-xp.dtsi

@@ -16,7 +16,7 @@
  * common to all Armada SoCs.
  */
 
-/include/ "armada-370-xp.dtsi"
+#include "armada-370-xp.dtsi"
 
 / {
 	model = "Marvell Armada XP family SoC";
@@ -27,6 +27,13 @@
 	};
 
 	soc {
+		compatible = "marvell,armadaxp-mbus", "simple-bus";
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+		};
+
 		internal-regs {
 			L2: l2-cache {
 				compatible = "marvell,aurora-system-cache";

arch/arm/boot/dts/kirkwood-6281.dtsi

@@ -1,4 +1,39 @@
 / {
+	mbus {
+		pcie-controller {
+			compatible = "marvell,kirkwood-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
+
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 9>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+			};
+		};
+	};
+
 	ocp@f1000000 {
 		pinctrl: pinctrl@10000 {
 			compatible = "marvell,88f6281-pinctrl";
@@ -41,37 +76,6 @@
 			};
 		};
 
-		pcie-controller {
-			compatible = "marvell,kirkwood-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			bus-range = <0x00 0xff>;
-
-			ranges = <0x82000000 0 0x00040000 0x00040000 0 0x00002000   /* Port 0.0 registers */
-				  0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
-			          0x81000000 0 0          0xe8000000 0 0x00100000>; /* downstream I/O */
-
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gate_clk 2>;
-				status = "disabled";
-			};
-		};
-
 		rtc@10300 {
 			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
 			reg = <0x10300 0x20>;

arch/arm/boot/dts/kirkwood-6282.dtsi

@@ -1,4 +1,59 @@
 / {
+	mbus {
+		pcie-controller {
+			compatible = "marvell,kirkwood-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+			        0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0       1 0 /* Port 1.0 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0       1 0 /* Port 1.0 IO  */>;
+
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 9>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+			};
+
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 10>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 18>;
+				status = "disabled";
+			};
+		};
+	};
 	ocp@f1000000 {
 
 		pinctrl: pinctrl@10000 {
@@ -94,52 +149,5 @@
 			status = "disabled";
 		};
 
-		pcie-controller {
-			compatible = "marvell,kirkwood-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			bus-range = <0x00 0xff>;
-
-			ranges = <0x82000000 0 0x00040000 0x00040000 0 0x00002000   /* Port 0.0 registers */
-			          0x82000000 0 0x00044000 0x00044000 0 0x00002000   /* Port 1.0 registers */
-				  0x82000000 0 0xe0000000 0xe0000000 0 0x08000000   /* non-prefetchable memory */
-			          0x81000000 0 0          0xe8000000 0 0x00100000>; /* downstream I/O */
-
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 9>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gate_clk 2>;
-				status = "disabled";
-			};
-
-			pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 10>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gate_clk 18>;
-				status = "disabled";
-			};
-		};
 	};
 };

arch/arm/boot/dts/kirkwood-cloudbox.dts

@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "LaCie CloudBox";

arch/arm/boot/dts/kirkwood-db-88f6281.dts

@@ -11,14 +11,15 @@
 
 /dts-v1/;
 
-/include/ "kirkwood-db.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood-db.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "Marvell DB-88F6281-BP Development Board";
 	compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood";
 
-	ocp@f1000000 {
+	mbus {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
 		pcie-controller {
 			status = "okay";
 

arch/arm/boot/dts/kirkwood-db-88f6282.dts

@@ -11,14 +11,15 @@
 
 /dts-v1/;
 
-/include/ "kirkwood-db.dtsi"
-/include/ "kirkwood-6282.dtsi"
+#include "kirkwood-db.dtsi"
+#include "kirkwood-6282.dtsi"
 
 / {
 	model = "Marvell DB-88F6282-BP Development Board";
 	compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood";
 
-	ocp@f1000000 {
+	mbus {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
 		pcie-controller {
 			status = "okay";
 

arch/arm/boot/dts/kirkwood-db.dtsi

@@ -12,7 +12,7 @@
  * and 6282 variants of the Marvell Kirkwood Development Board.
  */
 
-/include/ "kirkwood.dtsi"
+#include "kirkwood.dtsi"
 
 / {
 	memory {
@@ -77,13 +77,5 @@
 			cd-gpios = <&gpio1 6 0>;
 			status = "okay";
 		};
-
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
 	};
 };

arch/arm/boot/dts/kirkwood-dns320.dts

@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "kirkwood-dnskw.dtsi"
+#include "kirkwood-dnskw.dtsi"
 
 / {
 	model = "D-Link DNS-320 NAS (Rev A1)";

arch/arm/boot/dts/kirkwood-dns325.dts

@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "kirkwood-dnskw.dtsi"
+#include "kirkwood-dnskw.dtsi"
 
 / {
 	model = "D-Link DNS-325 NAS (Rev A1)";

arch/arm/boot/dts/kirkwood-dnskw.dtsi

@@ -1,5 +1,5 @@
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "D-Link DNS NASes (kirkwood-based)";

arch/arm/boot/dts/kirkwood-dockstar.dts

@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "Seagate FreeAgent Dockstar";

arch/arm/boot/dts/kirkwood-dreamplug.dts

@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "Globalscale Technologies Dreamplug";

arch/arm/boot/dts/kirkwood-goflexnet.dts

@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "Seagate GoFlex Net";

arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts

@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "Globalscale Technologies Guruplug Server Plus";

arch/arm/boot/dts/kirkwood-ib62x0.dts

@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";

arch/arm/boot/dts/kirkwood-iconnect.dts

@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "Iomega Iconnect";
@@ -18,6 +18,17 @@
 		linux,initrd-end   = <0x4800000>;
 	};
 
+	mbus {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
 	ocp@f1000000 {
 		pinctrl: pinctrl@10000 {
 			pmx_button_reset: pmx-button-reset {
@@ -101,14 +112,6 @@
 				reg = <0x980000 0x1f400000>;
 			};
 		};
-
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
 	};
 
 	gpio-leds {

arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts

@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "Iomega StorCenter ix2-200";

arch/arm/boot/dts/kirkwood-is2.dts

@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "kirkwood-ns2-common.dtsi"
+#include "kirkwood-ns2-common.dtsi"
 
 / {
 	model = "LaCie Internet Space v2";

arch/arm/boot/dts/kirkwood-km_kirkwood.dts

@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-98dx4122.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-98dx4122.dtsi"
 
 / {
 	model = "Keymile Kirkwood Reference Design";

arch/arm/boot/dts/kirkwood-lschlv2.dts

@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "kirkwood-lsxl.dtsi"
+#include "kirkwood-lsxl.dtsi"
 
 / {
 	model = "Buffalo Linkstation LS-CHLv2";

arch/arm/boot/dts/kirkwood-lsxhl.dts

@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "kirkwood-lsxl.dtsi"
+#include "kirkwood-lsxl.dtsi"
 
 / {
 	model = "Buffalo Linkstation LS-XHL";

arch/arm/boot/dts/kirkwood-lsxl.dtsi

@@ -1,5 +1,5 @@
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	chosen {

arch/arm/boot/dts/kirkwood-mplcec4.dts

@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "MPL CEC4";
@@ -16,6 +16,17 @@
                 bootargs = "console=ttyS0,115200n8 earlyprintk";
         };
 
+	mbus {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
 	ocp@f1000000 {
 		pinctrl: pinctrl@10000 {
 			pmx_led_health: pmx-led-health {
@@ -134,14 +145,6 @@
 			cd-gpios = <&gpio1 15 1>;
 			/* No WP GPIO */
 		};
-
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
 	};
 
 	gpio-leds {

arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts

@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6282.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
 
 / {
 	model = "NETGEAR ReadyNAS Duo v2";
@@ -16,6 +16,17 @@
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
 	};
 
+	mbus {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
 	ocp@f1000000 {
 		pinctrl: pinctrl@10000 {
 			pmx_button_power: pmx-button-power {
@@ -101,14 +112,6 @@
 			status = "okay";
 			nr-ports = <2>;
 		};
-
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
 	};
 
 	gpio-leds {

arch/arm/boot/dts/kirkwood-ns2-common.dtsi

@@ -1,5 +1,5 @@
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	chosen {

arch/arm/boot/dts/kirkwood-ns2.dts

@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "kirkwood-ns2-common.dtsi"
+#include "kirkwood-ns2-common.dtsi"
 
 / {
 	model = "LaCie Network Space v2";

arch/arm/boot/dts/kirkwood-ns2lite.dts

@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "kirkwood-ns2-common.dtsi"
+#include "kirkwood-ns2-common.dtsi"
 
 / {
 	model = "LaCie Network Space Lite v2";

arch/arm/boot/dts/kirkwood-ns2max.dts

@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "kirkwood-ns2-common.dtsi"
+#include "kirkwood-ns2-common.dtsi"
 
 / {
 	model = "LaCie Network Space Max v2";

arch/arm/boot/dts/kirkwood-ns2mini.dts

@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "kirkwood-ns2-common.dtsi"
+#include "kirkwood-ns2-common.dtsi"
 
 / {
 	/* This machine is embedded in the first LaCie CloudBox product. */

arch/arm/boot/dts/kirkwood-nsa310.dts

@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	model = "ZyXEL NSA310";
@@ -16,6 +16,17 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
+	mbus {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
 	ocp@f1000000 {
 		pinctrl: pinctrl@10000 {
 			pinctrl-0 = <&pmx_unknown>;
@@ -162,14 +173,6 @@
 				reg = <0x5040000 0x2fc0000>;
 			};
 		};
-
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
 	};
 
 	gpio_keys {

arch/arm/boot/dts/kirkwood-openblocks_a6.dts

@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6282.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
 
 / {
 	model = "Plat'Home OpenBlocksA6";

arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi

@@ -6,8 +6,8 @@
  * Licensed under GPLv2
  */
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
 
 / {
 	memory {

arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts

@@ -8,7 +8,7 @@
 
 /dts-v1/;
 
-/include/ "kirkwood-sheevaplug-common.dtsi"
+#include "kirkwood-sheevaplug-common.dtsi"
 
 / {
 	model = "Globalscale Technologies eSATA SheevaPlug";

arch/arm/boot/dts/kirkwood-sheevaplug.dts

@@ -8,7 +8,7 @@
 
 /dts-v1/;
 
-/include/ "kirkwood-sheevaplug-common.dtsi"
+#include "kirkwood-sheevaplug-common.dtsi"
 
 / {
 	model = "Globalscale Technologies SheevaPlug";

arch/arm/boot/dts/kirkwood-topkick.dts

@@ -1,7 +1,7 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6282.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
 
 / {
 	model = "Univeral Scientific Industrial Co. Topkick-1281P2";

arch/arm/boot/dts/kirkwood-ts219-6281.dts

@@ -1,8 +1,8 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
-/include/ "kirkwood-ts219.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-ts219.dtsi"
 
 / {
 	ocp@f1000000 {

arch/arm/boot/dts/kirkwood-ts219-6282.dts

@@ -1,10 +1,21 @@
 /dts-v1/;
 
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6282.dtsi"
-/include/ "kirkwood-ts219.dtsi"
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-ts219.dtsi"
 
 / {
+	mbus {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>;
+		pcie-controller {
+			status = "okay";
+
+			pcie@2,0 {
+				status = "okay";
+			};
+		};
+	};
+
 	ocp@f1000000 {
 		pinctrl: pinctrl@10000 {
 
@@ -30,14 +41,6 @@
 				marvell,function = "gpio";
 			};
 		};
-		pcie-controller {
-			status = "okay";
-
-			pcie@2,0 {
-				status = "okay";
-			};
-		};
-
 	};
 
 	gpio_keys {

arch/arm/boot/dts/kirkwood-ts219.dtsi

@@ -11,6 +11,16 @@
 		bootargs = "console=ttyS0,115200n8";
 	};
 
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
 	ocp@f1000000 {
 		i2c@11000 {
 			status = "okay";
@@ -87,12 +97,5 @@
 			status = "okay";
 			nr-ports = <2>;
 		};
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
 	};
 };

arch/arm/boot/dts/kirkwood.dtsi

@@ -1,5 +1,7 @@
 /include/ "skeleton.dtsi"
 
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
 / {
 	compatible = "marvell,kirkwood";
 	interrupt-parent = <&intc>;
@@ -28,15 +30,28 @@
 		      <0xf1020214 0x04>;
 	};
 
+	mbus {
+		compatible = "marvell,kirkwood-mbus", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+		pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
+		pcie-io-aperture  = <0xf2000000 0x100000>;   /*   1 MiB    I/O space */
+	};
+
 	ocp@f1000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0xf1000000 0x0100000
-		          0xe0000000 0xe0000000 0x8100000 /* PCIE */
 		          0xf4000000 0xf4000000 0x0000400
 		          0xf5000000 0xf5000000 0x0000400>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
+		mbusc: mbus-controller@20000 {
+			compatible = "marvell,mbus-controller";
+			reg = <0x20000 0x80>, <0x1500 0x20>;
+		};
+
 		core_clk: core-clocks@10030 {
 			compatible = "marvell,kirkwood-core-clock";
 			reg = <0x10030 0x4>;

arch/arm/mach-dove/common.c

@@ -27,6 +27,22 @@
 #include <plat/time.h>
 #include "common.h"
 
+/* These can go away once Dove uses the mvebu-mbus DT binding */
+#define DOVE_MBUS_PCIE0_MEM_TARGET    0x4
+#define DOVE_MBUS_PCIE0_MEM_ATTR      0xe8
+#define DOVE_MBUS_PCIE0_IO_TARGET     0x4
+#define DOVE_MBUS_PCIE0_IO_ATTR       0xe0
+#define DOVE_MBUS_PCIE1_MEM_TARGET    0x8
+#define DOVE_MBUS_PCIE1_MEM_ATTR      0xe8
+#define DOVE_MBUS_PCIE1_IO_TARGET     0x8
+#define DOVE_MBUS_PCIE1_IO_ATTR       0xe0
+#define DOVE_MBUS_CESA_TARGET         0x3
+#define DOVE_MBUS_CESA_ATTR           0x1
+#define DOVE_MBUS_BOOTROM_TARGET      0x1
+#define DOVE_MBUS_BOOTROM_ATTR        0xfd
+#define DOVE_MBUS_SCRATCHPAD_TARGET   0xd
+#define DOVE_MBUS_SCRATCHPAD_ATTR     0x0
+
 /*****************************************************************************
  * I/O Address Mapping
  ****************************************************************************/
@@ -332,34 +348,40 @@ void __init dove_setup_cpu_wins(void)
 {
 	/*
 	 * The PCIe windows will no longer be statically allocated
-	 * here once Dove is migrated to the pci-mvebu driver.
+	 * here once Dove is migrated to the pci-mvebu driver. The
+	 * non-PCIe windows will no longer be created here once Dove
+	 * fully moves to DT.
 	 */
-	mvebu_mbus_add_window_remap_flags("pcie0.0",
+	mvebu_mbus_add_window_remap_by_id(DOVE_MBUS_PCIE0_IO_TARGET,
+					  DOVE_MBUS_PCIE0_IO_ATTR,
 					  DOVE_PCIE0_IO_PHYS_BASE,
 					  DOVE_PCIE0_IO_SIZE,
-					  DOVE_PCIE0_IO_BUS_BASE,
-					  MVEBU_MBUS_PCI_IO);
-	mvebu_mbus_add_window_remap_flags("pcie1.0",
+					  DOVE_PCIE0_IO_BUS_BASE);
+	mvebu_mbus_add_window_remap_by_id(DOVE_MBUS_PCIE1_IO_TARGET,
+					  DOVE_MBUS_PCIE1_IO_ATTR,
 					  DOVE_PCIE1_IO_PHYS_BASE,
 					  DOVE_PCIE1_IO_SIZE,
-					  DOVE_PCIE1_IO_BUS_BASE,
-					  MVEBU_MBUS_PCI_IO);
-	mvebu_mbus_add_window_remap_flags("pcie0.0",
-					  DOVE_PCIE0_MEM_PHYS_BASE,
-					  DOVE_PCIE0_MEM_SIZE,
-					  MVEBU_MBUS_NO_REMAP,
-					  MVEBU_MBUS_PCI_MEM);
-	mvebu_mbus_add_window_remap_flags("pcie1.0",
-					  DOVE_PCIE1_MEM_PHYS_BASE,
-					  DOVE_PCIE1_MEM_SIZE,
-					  MVEBU_MBUS_NO_REMAP,
-					  MVEBU_MBUS_PCI_MEM);
-	mvebu_mbus_add_window("cesa", DOVE_CESA_PHYS_BASE,
-			      DOVE_CESA_SIZE);
-	mvebu_mbus_add_window("bootrom", DOVE_BOOTROM_PHYS_BASE,
-			      DOVE_BOOTROM_SIZE);
-	mvebu_mbus_add_window("scratchpad", DOVE_SCRATCHPAD_PHYS_BASE,
-			      DOVE_SCRATCHPAD_SIZE);
+					  DOVE_PCIE1_IO_BUS_BASE);
+	mvebu_mbus_add_window_by_id(DOVE_MBUS_PCIE0_MEM_TARGET,
+				    DOVE_MBUS_PCIE0_MEM_ATTR,
+				    DOVE_PCIE0_MEM_PHYS_BASE,
+				    DOVE_PCIE0_MEM_SIZE);
+	mvebu_mbus_add_window_by_id(DOVE_MBUS_PCIE1_MEM_TARGET,
+				    DOVE_MBUS_PCIE1_MEM_ATTR,
+				    DOVE_PCIE1_MEM_PHYS_BASE,
+				    DOVE_PCIE1_MEM_SIZE);
+	mvebu_mbus_add_window_by_id(DOVE_MBUS_CESA_TARGET,
+				    DOVE_MBUS_CESA_ATTR,
+				    DOVE_CESA_PHYS_BASE,
+				    DOVE_CESA_SIZE);
+	mvebu_mbus_add_window_by_id(DOVE_MBUS_BOOTROM_TARGET,
+				    DOVE_MBUS_BOOTROM_ATTR,
+				    DOVE_BOOTROM_PHYS_BASE,
+				    DOVE_BOOTROM_SIZE);
+	mvebu_mbus_add_window_by_id(DOVE_MBUS_SCRATCHPAD_TARGET,
+				    DOVE_MBUS_SCRATCHPAD_ATTR,
+				    DOVE_SCRATCHPAD_PHYS_BASE,
+				    DOVE_SCRATCHPAD_SIZE);
 }
 
 void __init dove_init(void)

arch/arm/mach-kirkwood/board-dt.c

@@ -87,6 +87,7 @@ static void __init kirkwood_dt_init(void)
 	 */
 	writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
 
+	BUG_ON(mvebu_mbus_dt_init());
 	kirkwood_setup_wins();
 
 	kirkwood_l2_init();

arch/arm/mach-kirkwood/common.c

@@ -37,6 +37,12 @@
 #include <linux/platform_data/dma-mv_xor.h>
 #include "common.h"
 
+/* These can go away once Kirkwood uses the mvebu-mbus DT binding */
+#define KIRKWOOD_MBUS_NAND_TARGET 0x01
+#define KIRKWOOD_MBUS_NAND_ATTR   0x2f
+#define KIRKWOOD_MBUS_SRAM_TARGET 0x03
+#define KIRKWOOD_MBUS_SRAM_ATTR   0x01
+
 /*****************************************************************************
  * I/O Address Mapping
  ****************************************************************************/
@@ -528,10 +534,6 @@ void __init kirkwood_cpuidle_init(void)
 void __init kirkwood_init_early(void)
 {
 	orion_time_set_base(TIMER_VIRT_BASE);
-
-	mvebu_mbus_init("marvell,kirkwood-mbus",
-			BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
-			DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ);
 }
 
 int kirkwood_tclk;
@@ -672,10 +674,14 @@ char * __init kirkwood_id(void)
 
 void __init kirkwood_setup_wins(void)
 {
-	mvebu_mbus_add_window("nand", KIRKWOOD_NAND_MEM_PHYS_BASE,
-			      KIRKWOOD_NAND_MEM_SIZE);
-	mvebu_mbus_add_window("sram", KIRKWOOD_SRAM_PHYS_BASE,
-			      KIRKWOOD_SRAM_SIZE);
+	mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_NAND_TARGET,
+				    KIRKWOOD_MBUS_NAND_ATTR,
+				    KIRKWOOD_NAND_MEM_PHYS_BASE,
+				    KIRKWOOD_NAND_MEM_SIZE);
+	mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_SRAM_TARGET,
+				    KIRKWOOD_MBUS_SRAM_ATTR,
+				    KIRKWOOD_SRAM_PHYS_BASE,
+				    KIRKWOOD_SRAM_SIZE);
 }
 
 void __init kirkwood_l2_init(void)
@@ -703,6 +709,10 @@ void __init kirkwood_init(void)
 	 */
 	writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
 
+	BUG_ON(mvebu_mbus_init("marvell,kirkwood-mbus",
+			BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
+			DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ));
+
 	kirkwood_setup_wins();
 
 	kirkwood_l2_init();

arch/arm/mach-kirkwood/pcie.c

@@ -20,6 +20,16 @@
 #include <mach/bridge-regs.h>
 #include "common.h"
 
+/* These can go away once Kirkwood uses the mvebu-mbus DT binding */
+#define KIRKWOOD_MBUS_PCIE0_MEM_TARGET    0x4
+#define KIRKWOOD_MBUS_PCIE0_MEM_ATTR      0xe8
+#define KIRKWOOD_MBUS_PCIE0_IO_TARGET     0x4
+#define KIRKWOOD_MBUS_PCIE0_IO_ATTR       0xe0
+#define KIRKWOOD_MBUS_PCIE1_MEM_TARGET    0x4
+#define KIRKWOOD_MBUS_PCIE1_MEM_ATTR      0xd8
+#define KIRKWOOD_MBUS_PCIE1_IO_TARGET     0x4
+#define KIRKWOOD_MBUS_PCIE1_IO_ATTR       0xd0
+
 static void kirkwood_enable_pcie_clk(const char *port)
 {
 	struct clk *clk;
@@ -254,26 +264,24 @@ static void __init add_pcie_port(int index, void __iomem *base)
 
 void __init kirkwood_pcie_init(unsigned int portmask)
 {
-	mvebu_mbus_add_window_remap_flags("pcie0.0",
+	mvebu_mbus_add_window_remap_by_id(KIRKWOOD_MBUS_PCIE0_IO_TARGET,
+					  KIRKWOOD_MBUS_PCIE0_IO_ATTR,
 					  KIRKWOOD_PCIE_IO_PHYS_BASE,
 					  KIRKWOOD_PCIE_IO_SIZE,
-					  KIRKWOOD_PCIE_IO_BUS_BASE,
-					  MVEBU_MBUS_PCI_IO);
-	mvebu_mbus_add_window_remap_flags("pcie0.0",
-					  KIRKWOOD_PCIE_MEM_PHYS_BASE,
-					  KIRKWOOD_PCIE_MEM_SIZE,
-					  MVEBU_MBUS_NO_REMAP,
-					  MVEBU_MBUS_PCI_MEM);
-	mvebu_mbus_add_window_remap_flags("pcie1.0",
+					  KIRKWOOD_PCIE_IO_BUS_BASE);
+	mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_PCIE0_MEM_TARGET,
+				    KIRKWOOD_MBUS_PCIE0_MEM_ATTR,
+				    KIRKWOOD_PCIE_MEM_PHYS_BASE,
+				    KIRKWOOD_PCIE_MEM_SIZE);
+	mvebu_mbus_add_window_remap_by_id(KIRKWOOD_MBUS_PCIE1_IO_TARGET,
+					  KIRKWOOD_MBUS_PCIE1_IO_ATTR,
 					  KIRKWOOD_PCIE1_IO_PHYS_BASE,
 					  KIRKWOOD_PCIE1_IO_SIZE,
-					  KIRKWOOD_PCIE1_IO_BUS_BASE,
-					  MVEBU_MBUS_PCI_IO);
-	mvebu_mbus_add_window_remap_flags("pcie1.0",
-					  KIRKWOOD_PCIE1_MEM_PHYS_BASE,
-					  KIRKWOOD_PCIE1_MEM_SIZE,
-					  MVEBU_MBUS_NO_REMAP,
-					  MVEBU_MBUS_PCI_MEM);
+					  KIRKWOOD_PCIE1_IO_BUS_BASE);
+	mvebu_mbus_add_window_by_id(KIRKWOOD_MBUS_PCIE1_MEM_TARGET,
+				    KIRKWOOD_MBUS_PCIE1_MEM_ATTR,
+				    KIRKWOOD_PCIE1_MEM_PHYS_BASE,
+				    KIRKWOOD_PCIE1_MEM_SIZE);
 
 	vga_base = KIRKWOOD_PCIE_MEM_PHYS_BASE;
 

arch/arm/mach-mv78xx0/pcie.c

@@ -18,6 +18,11 @@
 #include <mach/mv78xx0.h>
 #include "common.h"
 
+#define MV78XX0_MBUS_PCIE_MEM_TARGET(port, lane) ((port) ? 8 : 4)
+#define MV78XX0_MBUS_PCIE_MEM_ATTR(port, lane)   (0xf8 & ~(0x10 << (lane)))
+#define MV78XX0_MBUS_PCIE_IO_TARGET(port, lane)  ((port) ? 8 : 4)
+#define MV78XX0_MBUS_PCIE_IO_ATTR(port, lane)    (0xf0 & ~(0x10 << (lane)))
+
 struct pcie_port {
 	u8			maj;
 	u8			min;
@@ -71,7 +76,6 @@ static void __init mv78xx0_pcie_preinit(void)
 	start = MV78XX0_PCIE_MEM_PHYS_BASE;
 	for (i = 0; i < num_pcie_ports; i++) {
 		struct pcie_port *pp = pcie_port + i;
-		char winname[MVEBU_MBUS_MAX_WINNAME_SZ];
 
 		snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
 			"PCIe %d.%d MEM", pp->maj, pp->min);
@@ -85,17 +89,12 @@ static void __init mv78xx0_pcie_preinit(void)
 		if (request_resource(&iomem_resource, &pp->res))
 			panic("can't allocate PCIe MEM sub-space");
 
-		snprintf(winname, sizeof(winname), "pcie%d.%d",
-			 pp->maj, pp->min);
-
-		mvebu_mbus_add_window_remap_flags(winname,
-						  pp->res.start,
-						  resource_size(&pp->res),
-						  MVEBU_MBUS_NO_REMAP,
-						  MVEBU_MBUS_PCI_MEM);
-		mvebu_mbus_add_window_remap_flags(winname,
-						  i * SZ_64K, SZ_64K,
-						  0, MVEBU_MBUS_PCI_IO);
+		mvebu_mbus_add_window_by_id(MV78XX0_MBUS_PCIE_MEM_TARGET(pp->maj, pp->min),
+					    MV78XX0_MBUS_PCIE_MEM_ATTR(pp->maj, pp->min),
+					    pp->res.start, resource_size(&pp->res));
+		mvebu_mbus_add_window_remap_by_id(MV78XX0_MBUS_PCIE_IO_TARGET(pp->maj, pp->min),
+						  MV78XX0_MBUS_PCIE_IO_ATTR(pp->maj, pp->min),
+						  i * SZ_64K, SZ_64K, 0);
 	}
 }
 

arch/arm/mach-mvebu/armada-370-xp.c

@@ -34,44 +34,12 @@ static void __init armada_370_xp_map_io(void)
 	debug_ll_io_init();
 }
 
-/*
- * This initialization will be replaced by a DT-based
- * initialization once the mvebu-mbus driver gains DT support.
- */
-
-#define ARMADA_370_XP_MBUS_WINS_OFFS   0x20000
-#define ARMADA_370_XP_MBUS_WINS_SIZE   0x100
-#define ARMADA_370_XP_SDRAM_WINS_OFFS  0x20180
-#define ARMADA_370_XP_SDRAM_WINS_SIZE  0x20
-
-static void __init armada_370_xp_mbus_init(void)
-{
-	char *mbus_soc_name;
-	struct device_node *dn;
-	const __be32 mbus_wins_offs = cpu_to_be32(ARMADA_370_XP_MBUS_WINS_OFFS);
-	const __be32 sdram_wins_offs = cpu_to_be32(ARMADA_370_XP_SDRAM_WINS_OFFS);
-
-	if (of_machine_is_compatible("marvell,armada370"))
-		mbus_soc_name = "marvell,armada370-mbus";
-	else
-		mbus_soc_name = "marvell,armadaxp-mbus";
-
-	dn = of_find_node_by_name(NULL, "internal-regs");
-	BUG_ON(!dn);
-
-	mvebu_mbus_init(mbus_soc_name,
-			of_translate_address(dn, &mbus_wins_offs),
-			ARMADA_370_XP_MBUS_WINS_SIZE,
-			of_translate_address(dn, &sdram_wins_offs),
-			ARMADA_370_XP_SDRAM_WINS_SIZE);
-}
-
 static void __init armada_370_xp_timer_and_clk_init(void)
 {
 	of_clk_init(NULL);
 	armada_370_xp_timer_init();
 	coherency_init();
-	armada_370_xp_mbus_init();
+	BUG_ON(mvebu_mbus_dt_init());
 #ifdef CONFIG_CACHE_L2X0
 	l2x0_of_init(0, ~0UL);
 #endif

arch/arm/mach-mvebu/platsmp.c

@@ -21,6 +21,7 @@
 #include <linux/smp.h>
 #include <linux/clk.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/mbus.h>
 #include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
@@ -29,6 +30,9 @@
 #include "pmsu.h"
 #include "coherency.h"
 
+#define AXP_BOOTROM_BASE 0xfff00000
+#define AXP_BOOTROM_SIZE 0x100000
+
 void __init set_secondary_cpus_clock(void)
 {
 	int thiscpu;
@@ -114,10 +118,29 @@ static void __init armada_xp_smp_init_cpus(void)
 
 void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus)
 {
+	struct device_node *node;
+	struct resource res;
+	int err;
+
 	set_secondary_cpus_clock();
 	flush_cache_all();
 	set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0);
-	mvebu_mbus_add_window("bootrom", 0xfff00000, SZ_1M);
+
+	/*
+	 * In order to boot the secondary CPUs we need to ensure
+	 * the bootROM is mapped at the correct address.
+	 */
+	node = of_find_compatible_node(NULL, NULL, "marvell,bootrom");
+	if (!node)
+		panic("Cannot find 'marvell,bootrom' compatible node");
+
+	err = of_address_to_resource(node, 0, &res);
+	if (err < 0)
+		panic("Cannot get 'bootrom' node address");
+
+	if (res.start != AXP_BOOTROM_BASE ||
+	    resource_size(&res) != AXP_BOOTROM_SIZE)
+		panic("The address for the BootROM is incorrect");
 }
 
 struct smp_operations armada_xp_smp_ops __initdata = {

arch/arm/mach-orion5x/common.c

@@ -174,8 +174,10 @@ void __init orion5x_xor_init(void)
  ****************************************************************************/
 static void __init orion5x_crypto_init(void)
 {
-	mvebu_mbus_add_window("sram", ORION5X_SRAM_PHYS_BASE,
-			      ORION5X_SRAM_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_SRAM_TARGET,
+				    ORION_MBUS_SRAM_ATTR,
+				    ORION5X_SRAM_PHYS_BASE,
+				    ORION5X_SRAM_SIZE);
 	orion_crypto_init(ORION5X_CRYPTO_PHYS_BASE, ORION5X_SRAM_PHYS_BASE,
 			  SZ_8K, IRQ_ORION5X_CESA);
 }
@@ -222,22 +224,24 @@ void orion5x_setup_wins(void)
 	 * The PCIe windows will no longer be statically allocated
 	 * here once Orion5x is migrated to the pci-mvebu driver.
 	 */
-	mvebu_mbus_add_window_remap_flags("pcie0.0", ORION5X_PCIE_IO_PHYS_BASE,
+	mvebu_mbus_add_window_remap_by_id(ORION_MBUS_PCIE_IO_TARGET,
+					  ORION_MBUS_PCIE_IO_ATTR,
+					  ORION5X_PCIE_IO_PHYS_BASE,
 					  ORION5X_PCIE_IO_SIZE,
-					  ORION5X_PCIE_IO_BUS_BASE,
-					  MVEBU_MBUS_PCI_IO);
-	mvebu_mbus_add_window_remap_flags("pcie0.0", ORION5X_PCIE_MEM_PHYS_BASE,
-					  ORION5X_PCIE_MEM_SIZE,
-					  MVEBU_MBUS_NO_REMAP,
-					  MVEBU_MBUS_PCI_MEM);
-	mvebu_mbus_add_window_remap_flags("pci0.0", ORION5X_PCI_IO_PHYS_BASE,
+					  ORION5X_PCIE_IO_BUS_BASE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_PCIE_MEM_TARGET,
+				    ORION_MBUS_PCIE_MEM_ATTR,
+				    ORION5X_PCIE_MEM_PHYS_BASE,
+				    ORION5X_PCIE_MEM_SIZE);
+	mvebu_mbus_add_window_remap_by_id(ORION_MBUS_PCI_IO_TARGET,
+					  ORION_MBUS_PCI_IO_ATTR,
+					  ORION5X_PCI_IO_PHYS_BASE,
 					  ORION5X_PCI_IO_SIZE,
-					  ORION5X_PCI_IO_BUS_BASE,
-					  MVEBU_MBUS_PCI_IO);
-	mvebu_mbus_add_window_remap_flags("pci0.0", ORION5X_PCI_MEM_PHYS_BASE,
-					  ORION5X_PCI_MEM_SIZE,
-					  MVEBU_MBUS_NO_REMAP,
-					  MVEBU_MBUS_PCI_MEM);
+					  ORION5X_PCI_IO_BUS_BASE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_PCI_MEM_TARGET,
+				    ORION_MBUS_PCI_MEM_ATTR,
+				    ORION5X_PCI_MEM_PHYS_BASE,
+				    ORION5X_PCI_MEM_SIZE);
 }
 
 int orion5x_tclk;

arch/arm/mach-orion5x/common.h

@@ -7,6 +7,23 @@ struct dsa_platform_data;
 struct mv643xx_eth_platform_data;
 struct mv_sata_platform_data;
 
+#define ORION_MBUS_PCIE_MEM_TARGET    0x04
+#define ORION_MBUS_PCIE_MEM_ATTR      0x59
+#define ORION_MBUS_PCIE_IO_TARGET     0x04
+#define ORION_MBUS_PCIE_IO_ATTR       0x51
+#define ORION_MBUS_PCIE_WA_TARGET     0x04
+#define ORION_MBUS_PCIE_WA_ATTR       0x79
+#define ORION_MBUS_PCI_MEM_TARGET     0x03
+#define ORION_MBUS_PCI_MEM_ATTR       0x59
+#define ORION_MBUS_PCI_IO_TARGET      0x03
+#define ORION_MBUS_PCI_IO_ATTR        0x51
+#define ORION_MBUS_DEVBUS_BOOT_TARGET 0x01
+#define ORION_MBUS_DEVBUS_BOOT_ATTR   0x0f
+#define ORION_MBUS_DEVBUS_TARGET(cs)  0x01
+#define ORION_MBUS_DEVBUS_ATTR(cs)    (~(1 << cs))
+#define ORION_MBUS_SRAM_TARGET        0x00
+#define ORION_MBUS_SRAM_ATTR          0x00
+
 /*
  * Basic Orion init functions used early by machine-setup.
  */

arch/arm/mach-orion5x/d2net-setup.c

@@ -317,8 +317,10 @@ static void __init d2net_init(void)
 	d2net_sata_power_init();
 	orion5x_sata_init(&d2net_sata_data);
 
-	mvebu_mbus_add_window("devbus-boot", D2NET_NOR_BOOT_BASE,
-			      D2NET_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    D2NET_NOR_BOOT_BASE,
+				    D2NET_NOR_BOOT_SIZE);
 	platform_device_register(&d2net_nor_flash);
 
 	platform_device_register(&d2net_gpio_buttons);

arch/arm/mach-orion5x/db88f5281-setup.c

@@ -340,19 +340,27 @@ static void __init db88f5281_init(void)
 	orion5x_uart0_init();
 	orion5x_uart1_init();
 
-	mvebu_mbus_add_window("devbus-boot", DB88F5281_NOR_BOOT_BASE,
-			      DB88F5281_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    DB88F5281_NOR_BOOT_BASE,
+				    DB88F5281_NOR_BOOT_SIZE);
 	platform_device_register(&db88f5281_boot_flash);
 
-	mvebu_mbus_add_window("devbus-cs0", DB88F5281_7SEG_BASE,
-			      DB88F5281_7SEG_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(0),
+				    ORION_MBUS_DEVBUS_ATTR(0),
+				    DB88F5281_7SEG_BASE,
+				    DB88F5281_7SEG_SIZE);
 
-	mvebu_mbus_add_window("devbus-cs1", DB88F5281_NOR_BASE,
-			      DB88F5281_NOR_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(1),
+				    ORION_MBUS_DEVBUS_ATTR(1),
+				    DB88F5281_NOR_BASE,
+				    DB88F5281_NOR_SIZE);
 	platform_device_register(&db88f5281_nor_flash);
 
-	mvebu_mbus_add_window("devbus-cs2", DB88F5281_NAND_BASE,
-			      DB88F5281_NAND_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(2),
+				    ORION_MBUS_DEVBUS_ATTR(2),
+				    DB88F5281_NAND_BASE,
+				    DB88F5281_NAND_SIZE);
 	platform_device_register(&db88f5281_nand_flash);
 
 	i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);

arch/arm/mach-orion5x/dns323-setup.c

@@ -611,8 +611,10 @@ static void __init dns323_init(void)
 	/* setup flash mapping
 	 * CS3 holds a 8 MB Spansion S29GL064M90TFIR4
 	 */
-	mvebu_mbus_add_window("devbus-boot", DNS323_NOR_BOOT_BASE,
-			      DNS323_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    DNS323_NOR_BOOT_BASE,
+				    DNS323_NOR_BOOT_SIZE);
 	platform_device_register(&dns323_nor_flash);
 
 	/* Sort out LEDs, Buttons and i2c devices */

arch/arm/mach-orion5x/edmini_v2-setup.c

@@ -154,8 +154,10 @@ void __init edmini_v2_init(void)
 	orion5x_ehci0_init();
 	orion5x_eth_init(&edmini_v2_eth_data);
 
-	mvebu_mbus_add_window("devbus-boot", EDMINI_V2_NOR_BOOT_BASE,
-			      EDMINI_V2_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    EDMINI_V2_NOR_BOOT_BASE,
+				    EDMINI_V2_NOR_BOOT_SIZE);
 	platform_device_register(&edmini_v2_nor_flash);
 
 	pr_notice("edmini_v2: USB device port, flash write and power-off "

arch/arm/mach-orion5x/kurobox_pro-setup.c

@@ -359,13 +359,17 @@ static void __init kurobox_pro_init(void)
 	orion5x_uart1_init();
 	orion5x_xor_init();
 
-	mvebu_mbus_add_window("devbus-boot", KUROBOX_PRO_NOR_BOOT_BASE,
-			      KUROBOX_PRO_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    KUROBOX_PRO_NOR_BOOT_BASE,
+				    KUROBOX_PRO_NOR_BOOT_SIZE);
 	platform_device_register(&kurobox_pro_nor_flash);
 
 	if (machine_is_kurobox_pro()) {
-		mvebu_mbus_add_window("devbus-cs0", KUROBOX_PRO_NAND_BASE,
-				      KUROBOX_PRO_NAND_SIZE);
+		mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(0),
+					    ORION_MBUS_DEVBUS_ATTR(0),
+					    KUROBOX_PRO_NAND_BASE,
+					    KUROBOX_PRO_NAND_SIZE);
 		platform_device_register(&kurobox_pro_nand_flash);
 	}
 

arch/arm/mach-orion5x/ls-chl-setup.c

@@ -294,8 +294,10 @@ static void __init lschl_init(void)
 	orion5x_uart0_init();
 	orion5x_xor_init();
 
-	mvebu_mbus_add_window("devbus-boot", LSCHL_NOR_BOOT_BASE,
-			      LSCHL_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    LSCHL_NOR_BOOT_BASE,
+				    LSCHL_NOR_BOOT_SIZE);
 	platform_device_register(&lschl_nor_flash);
 
 	platform_device_register(&lschl_leds);

arch/arm/mach-orion5x/ls_hgl-setup.c

@@ -243,8 +243,10 @@ static void __init ls_hgl_init(void)
 	orion5x_uart0_init();
 	orion5x_xor_init();
 
-	mvebu_mbus_add_window("devbus-boot", LS_HGL_NOR_BOOT_BASE,
-			      LS_HGL_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    LS_HGL_NOR_BOOT_BASE,
+				    LS_HGL_NOR_BOOT_SIZE);
 	platform_device_register(&ls_hgl_nor_flash);
 
 	platform_device_register(&ls_hgl_button_device);

arch/arm/mach-orion5x/lsmini-setup.c

@@ -244,8 +244,10 @@ static void __init lsmini_init(void)
 	orion5x_uart0_init();
 	orion5x_xor_init();
 
-	mvebu_mbus_add_window("devbus-boot", LSMINI_NOR_BOOT_BASE,
-			      LSMINI_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    LSMINI_NOR_BOOT_BASE,
+				    LSMINI_NOR_BOOT_SIZE);
 	platform_device_register(&lsmini_nor_flash);
 
 	platform_device_register(&lsmini_button_device);

arch/arm/mach-orion5x/mss2-setup.c

@@ -241,8 +241,10 @@ static void __init mss2_init(void)
 	orion5x_uart0_init();
 	orion5x_xor_init();
 
-	mvebu_mbus_add_window("devbus-boot", MSS2_NOR_BOOT_BASE,
-			      MSS2_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    MSS2_NOR_BOOT_BASE,
+				    MSS2_NOR_BOOT_SIZE);
 	platform_device_register(&mss2_nor_flash);
 
 	platform_device_register(&mss2_button_device);

arch/arm/mach-orion5x/mv2120-setup.c

@@ -204,8 +204,10 @@ static void __init mv2120_init(void)
 	orion5x_uart0_init();
 	orion5x_xor_init();
 
-	mvebu_mbus_add_window("devbus-boot", MV2120_NOR_BOOT_BASE,
-			      MV2120_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    MV2120_NOR_BOOT_BASE,
+				    MV2120_NOR_BOOT_SIZE);
 	platform_device_register(&mv2120_nor_flash);
 
 	platform_device_register(&mv2120_button_device);

arch/arm/mach-orion5x/net2big-setup.c

@@ -397,8 +397,10 @@ static void __init net2big_init(void)
 	net2big_sata_power_init();
 	orion5x_sata_init(&net2big_sata_data);
 
-	mvebu_mbus_add_window("devbus-boot", NET2BIG_NOR_BOOT_BASE,
-			      NET2BIG_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    NET2BIG_NOR_BOOT_BASE,
+				    NET2BIG_NOR_BOOT_SIZE);
 	platform_device_register(&net2big_nor_flash);
 
 	platform_device_register(&net2big_gpio_buttons);

arch/arm/mach-orion5x/pci.c

@@ -157,11 +157,10 @@ static int __init pcie_setup(struct pci_sys_data *sys)
 	if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) {
 		printk(KERN_NOTICE "Applying Orion-1/Orion-NAS PCIe config "
 				   "read transaction workaround\n");
-		mvebu_mbus_add_window_remap_flags("pcie0.0",
-						  ORION5X_PCIE_WA_PHYS_BASE,
-						  ORION5X_PCIE_WA_SIZE,
-						  MVEBU_MBUS_NO_REMAP,
-						  MVEBU_MBUS_PCI_WA);
+		mvebu_mbus_add_window_by_id(ORION_MBUS_PCIE_WA_TARGET,
+					    ORION_MBUS_PCIE_WA_ATTR,
+					    ORION5X_PCIE_WA_PHYS_BASE,
+					    ORION5X_PCIE_WA_SIZE);
 		pcie_ops.read = pcie_rd_conf_wa;
 	}
 

arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c

@@ -123,8 +123,10 @@ static void __init rd88f5181l_fxo_init(void)
 	orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data, NO_IRQ);
 	orion5x_uart0_init();
 
-	mvebu_mbus_add_window("devbus-boot", RD88F5181L_FXO_NOR_BOOT_BASE,
-			      RD88F5181L_FXO_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    RD88F5181L_FXO_NOR_BOOT_BASE,
+				    RD88F5181L_FXO_NOR_BOOT_SIZE);
 	platform_device_register(&rd88f5181l_fxo_nor_boot_flash);
 }
 

arch/arm/mach-orion5x/rd88f5181l-ge-setup.c

@@ -130,8 +130,10 @@ static void __init rd88f5181l_ge_init(void)
 	orion5x_i2c_init();
 	orion5x_uart0_init();
 
-	mvebu_mbus_add_window("devbus-boot", RD88F5181L_GE_NOR_BOOT_BASE,
-			      RD88F5181L_GE_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    RD88F5181L_GE_NOR_BOOT_BASE,
+				    RD88F5181L_GE_NOR_BOOT_SIZE);
 	platform_device_register(&rd88f5181l_ge_nor_boot_flash);
 
 	i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc, 1);

arch/arm/mach-orion5x/rd88f5182-setup.c

@@ -264,11 +264,14 @@ static void __init rd88f5182_init(void)
 	orion5x_uart0_init();
 	orion5x_xor_init();
 
-	mvebu_mbus_add_window("devbus-boot", RD88F5182_NOR_BOOT_BASE,
-			      RD88F5182_NOR_BOOT_SIZE);
-
-	mvebu_mbus_add_window("devbus-cs1", RD88F5182_NOR_BASE,
-			      RD88F5182_NOR_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    RD88F5182_NOR_BOOT_BASE,
+				    RD88F5182_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(1),
+				    ORION_MBUS_DEVBUS_ATTR(1),
+				    RD88F5182_NOR_BASE,
+				    RD88F5182_NOR_SIZE);
 	platform_device_register(&rd88f5182_nor_flash);
 	platform_device_register(&rd88f5182_gpio_leds);
 

arch/arm/mach-orion5x/terastation_pro2-setup.c

@@ -329,8 +329,10 @@ static void __init tsp2_init(void)
 	/*
 	 * Configure peripherals.
 	 */
-	mvebu_mbus_add_window("devbus-boot", TSP2_NOR_BOOT_BASE,
-			      TSP2_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    TSP2_NOR_BOOT_BASE,
+				    TSP2_NOR_BOOT_SIZE);
 	platform_device_register(&tsp2_nor_flash);
 
 	orion5x_ehci0_init();

arch/arm/mach-orion5x/ts209-setup.c

@@ -286,8 +286,10 @@ static void __init qnap_ts209_init(void)
 	/*
 	 * Configure peripherals.
 	 */
-	mvebu_mbus_add_window("devbus-boot", QNAP_TS209_NOR_BOOT_BASE,
-			      QNAP_TS209_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    QNAP_TS209_NOR_BOOT_BASE,
+				    QNAP_TS209_NOR_BOOT_SIZE);
 	platform_device_register(&qnap_ts209_nor_flash);
 
 	orion5x_ehci0_init();

arch/arm/mach-orion5x/ts409-setup.c

@@ -277,8 +277,10 @@ static void __init qnap_ts409_init(void)
 	/*
 	 * Configure peripherals.
 	 */
-	mvebu_mbus_add_window("devbus-boot", QNAP_TS409_NOR_BOOT_BASE,
-			      QNAP_TS409_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    QNAP_TS409_NOR_BOOT_BASE,
+				    QNAP_TS409_NOR_BOOT_SIZE);
 	platform_device_register(&qnap_ts409_nor_flash);
 
 	orion5x_ehci0_init();

arch/arm/mach-orion5x/wnr854t-setup.c

@@ -127,8 +127,10 @@ static void __init wnr854t_init(void)
 	orion5x_eth_switch_init(&wnr854t_switch_plat_data, NO_IRQ);
 	orion5x_uart0_init();
 
-	mvebu_mbus_add_window("devbus-boot", WNR854T_NOR_BOOT_BASE,
-			      WNR854T_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    WNR854T_NOR_BOOT_BASE,
+				    WNR854T_NOR_BOOT_SIZE);
 	platform_device_register(&wnr854t_nor_flash);
 }
 

arch/arm/mach-orion5x/wrt350n-v2-setup.c

@@ -213,8 +213,10 @@ static void __init wrt350n_v2_init(void)
 	orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data, NO_IRQ);
 	orion5x_uart0_init();
 
-	mvebu_mbus_add_window("devbus-boot", WRT350N_V2_NOR_BOOT_BASE,
-			      WRT350N_V2_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    WRT350N_V2_NOR_BOOT_BASE,
+				    WRT350N_V2_NOR_BOOT_SIZE);
 	platform_device_register(&wrt350n_v2_nor_flash);
 	platform_device_register(&wrt350n_v2_leds);
 	platform_device_register(&wrt350n_v2_button_device);

drivers/bus/mvebu-mbus.c

@@ -35,13 +35,9 @@
  *
  * - Provides an API for platform code or device drivers to
  *   dynamically add or remove address decoding windows for the CPU ->
- *   device accesses. This API is mvebu_mbus_add_window(),
- *   mvebu_mbus_add_window_remap_flags() and
- *   mvebu_mbus_del_window(). Since the (target, attribute) values
- *   differ from one SoC family to another, the API uses a 'const char
- *   *' string to identify devices, and this driver is responsible for
- *   knowing the mapping between the name of a device and its
- *   corresponding (target, attribute) in the current SoC family.
+ *   device accesses. This API is mvebu_mbus_add_window_by_id(),
+ *   mvebu_mbus_add_window_remap_by_id() and
+ *   mvebu_mbus_del_window().
  *
  * - Provides a debugfs interface in /sys/kernel/debug/mvebu-mbus/ to
  *   see the list of CPU -> SDRAM windows and their configuration
@@ -97,33 +93,6 @@
 
 #define DOVE_DDR_BASE_CS_OFF(n) ((n) << 4)
 
-struct mvebu_mbus_mapping {
-	const char *name;
-	u8 target;
-	u8 attr;
-	u8 attrmask;
-};
-
-/*
- * Masks used for the 'attrmask' field of mvebu_mbus_mapping. They
- * allow to get the real attribute value, discarding the special bits
- * used to select a PCI MEM region or a PCI WA region. This allows the
- * debugfs code to reverse-match the name of a device from its
- * target/attr values.
- *
- * For all devices except PCI, all bits of 'attr' must be
- * considered. For most SoCs, only bit 3 should be ignored (it allows
- * to select between PCI MEM and PCI I/O). On Orion5x however, there
- * is the special bit 5 to select a PCI WA region.
- */
-#define MAPDEF_NOMASK       0xff
-#define MAPDEF_PCIMASK      0xf7
-#define MAPDEF_ORIONPCIMASK 0xd7
-
-/* Macro used to define one mvebu_mbus_mapping entry */
-#define MAPDEF(__n, __t, __a, __m) \
-	{ .name = __n, .target = __t, .attr = __a, .attrmask = __m }
-
 struct mvebu_mbus_state;
 
 struct mvebu_mbus_soc_data {
@@ -133,7 +102,6 @@ struct mvebu_mbus_soc_data {
 	void (*setup_cpu_target)(struct mvebu_mbus_state *s);
 	int (*show_cpu_target)(struct mvebu_mbus_state *s,
 			       struct seq_file *seq, void *v);
-	const struct mvebu_mbus_mapping *map;
 };
 
 struct mvebu_mbus_state {
@@ -142,6 +110,8 @@ struct mvebu_mbus_state {
 	struct dentry *debugfs_root;
 	struct dentry *debugfs_sdram;
 	struct dentry *debugfs_devs;
+	struct resource pcie_mem_aperture;
+	struct resource pcie_io_aperture;
 	const struct mvebu_mbus_soc_data *soc;
 	int hw_io_coherency;
 };
@@ -428,8 +398,7 @@ static int mvebu_devs_debug_show(struct seq_file *seq, void *v)
 		u64 wbase, wremap;
 		u32 wsize;
 		u8 wtarget, wattr;
-		int enabled, i;
-		const char *name;
+		int enabled;
 
 		mvebu_mbus_read_window(mbus, win,
 				       &enabled, &wbase, &wsize,
@@ -440,18 +409,9 @@ static int mvebu_devs_debug_show(struct seq_file *seq, void *v)
 			continue;
 		}
 
-
-		for (i = 0; mbus->soc->map[i].name; i++)
-			if (mbus->soc->map[i].target == wtarget &&
-			    mbus->soc->map[i].attr ==
-			    (wattr & mbus->soc->map[i].attrmask))
-				break;
-
-		name = mbus->soc->map[i].name ?: "unknown";
-
-		seq_printf(seq, "[%02d] %016llx - %016llx : %s",
+		seq_printf(seq, "[%02d] %016llx - %016llx : %04x:%04x",
 			   win, (unsigned long long)wbase,
-			   (unsigned long long)(wbase + wsize), name);
+			   (unsigned long long)(wbase + wsize), wtarget, wattr);
 
 		if (win < mbus->soc->num_remappable_wins) {
 			seq_printf(seq, " (remap %016llx)\n",
@@ -576,62 +536,12 @@ mvebu_mbus_dove_setup_cpu_target(struct mvebu_mbus_state *mbus)
 	mvebu_mbus_dram_info.num_cs = cs;
 }
 
-static const struct mvebu_mbus_mapping armada_370_map[] = {
-	MAPDEF("bootrom",     1, 0xe0, MAPDEF_NOMASK),
-	MAPDEF("devbus-boot", 1, 0x2f, MAPDEF_NOMASK),
-	MAPDEF("devbus-cs0",  1, 0x3e, MAPDEF_NOMASK),
-	MAPDEF("devbus-cs1",  1, 0x3d, MAPDEF_NOMASK),
-	MAPDEF("devbus-cs2",  1, 0x3b, MAPDEF_NOMASK),
-	MAPDEF("devbus-cs3",  1, 0x37, MAPDEF_NOMASK),
-	MAPDEF("pcie0.0",     4, 0xe0, MAPDEF_PCIMASK),
-	MAPDEF("pcie1.0",     8, 0xe0, MAPDEF_PCIMASK),
-	{},
-};
-
-static const struct mvebu_mbus_soc_data armada_370_mbus_data = {
+static const struct mvebu_mbus_soc_data armada_370_xp_mbus_data = {
 	.num_wins            = 20,
 	.num_remappable_wins = 8,
 	.win_cfg_offset      = armada_370_xp_mbus_win_offset,
 	.setup_cpu_target    = mvebu_mbus_default_setup_cpu_target,
 	.show_cpu_target     = mvebu_sdram_debug_show_orion,
-	.map                 = armada_370_map,
-};
-
-static const struct mvebu_mbus_mapping armada_xp_map[] = {
-	MAPDEF("bootrom",     1, 0x1d, MAPDEF_NOMASK),
-	MAPDEF("devbus-boot", 1, 0x2f, MAPDEF_NOMASK),
-	MAPDEF("devbus-cs0",  1, 0x3e, MAPDEF_NOMASK),
-	MAPDEF("devbus-cs1",  1, 0x3d, MAPDEF_NOMASK),
-	MAPDEF("devbus-cs2",  1, 0x3b, MAPDEF_NOMASK),
-	MAPDEF("devbus-cs3",  1, 0x37, MAPDEF_NOMASK),
-	MAPDEF("pcie0.0",     4, 0xe0, MAPDEF_PCIMASK),
-	MAPDEF("pcie0.1",     4, 0xd0, MAPDEF_PCIMASK),
-	MAPDEF("pcie0.2",     4, 0xb0, MAPDEF_PCIMASK),
-	MAPDEF("pcie0.3",     4, 0x70, MAPDEF_PCIMASK),
-	MAPDEF("pcie1.0",     8, 0xe0, MAPDEF_PCIMASK),
-	MAPDEF("pcie1.1",     8, 0xd0, MAPDEF_PCIMASK),
-	MAPDEF("pcie1.2",     8, 0xb0, MAPDEF_PCIMASK),
-	MAPDEF("pcie1.3",     8, 0x70, MAPDEF_PCIMASK),
-	MAPDEF("pcie2.0",     4, 0xf0, MAPDEF_PCIMASK),
-	MAPDEF("pcie3.0",     8, 0xf0, MAPDEF_PCIMASK),
-	{},
-};
-
-static const struct mvebu_mbus_soc_data armada_xp_mbus_data = {
-	.num_wins            = 20,
-	.num_remappable_wins = 8,
-	.win_cfg_offset      = armada_370_xp_mbus_win_offset,
-	.setup_cpu_target    = mvebu_mbus_default_setup_cpu_target,
-	.show_cpu_target     = mvebu_sdram_debug_show_orion,
-	.map                 = armada_xp_map,
-};
-
-static const struct mvebu_mbus_mapping kirkwood_map[] = {
-	MAPDEF("pcie0.0", 4, 0xe0, MAPDEF_PCIMASK),
-	MAPDEF("pcie1.0", 4, 0xd0, MAPDEF_PCIMASK),
-	MAPDEF("sram",    3, 0x01, MAPDEF_NOMASK),
-	MAPDEF("nand",    1, 0x2f, MAPDEF_NOMASK),
-	{},
 };
 
 static const struct mvebu_mbus_soc_data kirkwood_mbus_data = {
@@ -640,16 +550,6 @@ static const struct mvebu_mbus_soc_data kirkwood_mbus_data = {
 	.win_cfg_offset      = orion_mbus_win_offset,
 	.setup_cpu_target    = mvebu_mbus_default_setup_cpu_target,
 	.show_cpu_target     = mvebu_sdram_debug_show_orion,
-	.map                 = kirkwood_map,
-};
-
-static const struct mvebu_mbus_mapping dove_map[] = {
-	MAPDEF("pcie0.0",    0x4, 0xe0, MAPDEF_PCIMASK),
-	MAPDEF("pcie1.0",    0x8, 0xe0, MAPDEF_PCIMASK),
-	MAPDEF("cesa",       0x3, 0x01, MAPDEF_NOMASK),
-	MAPDEF("bootrom",    0x1, 0xfd, MAPDEF_NOMASK),
-	MAPDEF("scratchpad", 0xd, 0x0, MAPDEF_NOMASK),
-	{},
 };
 
 static const struct mvebu_mbus_soc_data dove_mbus_data = {
@@ -658,18 +558,6 @@ static const struct mvebu_mbus_soc_data dove_mbus_data = {
 	.win_cfg_offset      = orion_mbus_win_offset,
 	.setup_cpu_target    = mvebu_mbus_dove_setup_cpu_target,
 	.show_cpu_target     = mvebu_sdram_debug_show_dove,
-	.map                 = dove_map,
-};
-
-static const struct mvebu_mbus_mapping orion5x_map[] = {
-	MAPDEF("pcie0.0",     4, 0x51, MAPDEF_ORIONPCIMASK),
-	MAPDEF("pci0.0",      3, 0x51, MAPDEF_ORIONPCIMASK),
-	MAPDEF("devbus-boot", 1, 0x0f, MAPDEF_NOMASK),
-	MAPDEF("devbus-cs0",  1, 0x1e, MAPDEF_NOMASK),
-	MAPDEF("devbus-cs1",  1, 0x1d, MAPDEF_NOMASK),
-	MAPDEF("devbus-cs2",  1, 0x1b, MAPDEF_NOMASK),
-	MAPDEF("sram",        0, 0x00, MAPDEF_NOMASK),
-	{},
 };
 
 /*
@@ -682,7 +570,6 @@ static const struct mvebu_mbus_soc_data orion5x_4win_mbus_data = {
 	.win_cfg_offset      = orion_mbus_win_offset,
 	.setup_cpu_target    = mvebu_mbus_default_setup_cpu_target,
 	.show_cpu_target     = mvebu_sdram_debug_show_orion,
-	.map                 = orion5x_map,
 };
 
 static const struct mvebu_mbus_soc_data orion5x_2win_mbus_data = {
@@ -691,21 +578,6 @@ static const struct mvebu_mbus_soc_data orion5x_2win_mbus_data = {
 	.win_cfg_offset      = orion_mbus_win_offset,
 	.setup_cpu_target    = mvebu_mbus_default_setup_cpu_target,
 	.show_cpu_target     = mvebu_sdram_debug_show_orion,
-	.map                 = orion5x_map,
-};
-
-static const struct mvebu_mbus_mapping mv78xx0_map[] = {
-	MAPDEF("pcie0.0", 4, 0xe0, MAPDEF_PCIMASK),
-	MAPDEF("pcie0.1", 4, 0xd0, MAPDEF_PCIMASK),
-	MAPDEF("pcie0.2", 4, 0xb0, MAPDEF_PCIMASK),
-	MAPDEF("pcie0.3", 4, 0x70, MAPDEF_PCIMASK),
-	MAPDEF("pcie1.0", 8, 0xe0, MAPDEF_PCIMASK),
-	MAPDEF("pcie1.1", 8, 0xd0, MAPDEF_PCIMASK),
-	MAPDEF("pcie1.2", 8, 0xb0, MAPDEF_PCIMASK),
-	MAPDEF("pcie1.3", 8, 0x70, MAPDEF_PCIMASK),
-	MAPDEF("pcie2.0", 4, 0xf0, MAPDEF_PCIMASK),
-	MAPDEF("pcie3.0", 8, 0xf0, MAPDEF_PCIMASK),
-	{},
 };
 
 static const struct mvebu_mbus_soc_data mv78xx0_mbus_data = {
@@ -714,7 +586,6 @@ static const struct mvebu_mbus_soc_data mv78xx0_mbus_data = {
 	.win_cfg_offset      = mv78xx0_mbus_win_offset,
 	.setup_cpu_target    = mvebu_mbus_default_setup_cpu_target,
 	.show_cpu_target     = mvebu_sdram_debug_show_orion,
-	.map                 = mv78xx0_map,
 };
 
 /*
@@ -725,9 +596,9 @@ static const struct mvebu_mbus_soc_data mv78xx0_mbus_data = {
  */
 static const struct of_device_id of_mvebu_mbus_ids[] = {
 	{ .compatible = "marvell,armada370-mbus",
-	  .data = &armada_370_mbus_data, },
+	  .data = &armada_370_xp_mbus_data, },
 	{ .compatible = "marvell,armadaxp-mbus",
-	  .data = &armada_xp_mbus_data, },
+	  .data = &armada_370_xp_mbus_data, },
 	{ .compatible = "marvell,kirkwood-mbus",
 	  .data = &kirkwood_mbus_data, },
 	{ .compatible = "marvell,dove-mbus",
@@ -748,48 +619,27 @@ static const struct of_device_id of_mvebu_mbus_ids[] = {
 /*
  * Public API of the driver
  */
-int mvebu_mbus_add_window_remap_flags(const char *devname, phys_addr_t base,
-				      size_t size, phys_addr_t remap,
-				      unsigned int flags)
+int mvebu_mbus_add_window_remap_by_id(unsigned int target,
+				      unsigned int attribute,
+				      phys_addr_t base, size_t size,
+				      phys_addr_t remap)
 {
 	struct mvebu_mbus_state *s = &mbus_state;
-	u8 target, attr;
-	int i;
-
-	if (!s->soc->map)
-		return -ENODEV;
-
-	for (i = 0; s->soc->map[i].name; i++)
-		if (!strcmp(s->soc->map[i].name, devname))
-			break;
-
-	if (!s->soc->map[i].name) {
-		pr_err("unknown device '%s'\n", devname);
-		return -ENODEV;
-	}
-
-	target = s->soc->map[i].target;
-	attr   = s->soc->map[i].attr;
-
-	if (flags == MVEBU_MBUS_PCI_MEM)
-		attr |= 0x8;
-	else if (flags == MVEBU_MBUS_PCI_WA)
-		attr |= 0x28;
 
-	if (!mvebu_mbus_window_conflicts(s, base, size, target, attr)) {
-		pr_err("cannot add window '%s', conflicts with another window\n",
-		       devname);
+	if (!mvebu_mbus_window_conflicts(s, base, size, target, attribute)) {
+		pr_err("cannot add window '%x:%x', conflicts with another window\n",
+		       target, attribute);
 		return -EINVAL;
 	}
 
-	return mvebu_mbus_alloc_window(s, base, size, remap, target, attr);
-
+	return mvebu_mbus_alloc_window(s, base, size, remap, target, attribute);
 }
 
-int mvebu_mbus_add_window(const char *devname, phys_addr_t base, size_t size)
+int mvebu_mbus_add_window_by_id(unsigned int target, unsigned int attribute,
+				phys_addr_t base, size_t size)
 {
-	return mvebu_mbus_add_window_remap_flags(devname, base, size,
-						 MVEBU_MBUS_NO_REMAP, 0);
+	return mvebu_mbus_add_window_remap_by_id(target, attribute, base,
+						 size, MVEBU_MBUS_NO_REMAP);
 }
 
 int mvebu_mbus_del_window(phys_addr_t base, size_t size)
@@ -804,6 +654,20 @@ int mvebu_mbus_del_window(phys_addr_t base, size_t size)
 	return 0;
 }
 
+void mvebu_mbus_get_pcie_mem_aperture(struct resource *res)
+{
+	if (!res)
+		return;
+	*res = mbus_state.pcie_mem_aperture;
+}
+
+void mvebu_mbus_get_pcie_io_aperture(struct resource *res)
+{
+	if (!res)
+		return;
+	*res = mbus_state.pcie_io_aperture;
+}
+
 static __init int mvebu_mbus_debugfs_init(void)
 {
 	struct mvebu_mbus_state *s = &mbus_state;
@@ -830,14 +694,41 @@ static __init int mvebu_mbus_debugfs_init(void)
 }
 fs_initcall(mvebu_mbus_debugfs_init);
 
+static int __init mvebu_mbus_common_init(struct mvebu_mbus_state *mbus,
+					 phys_addr_t mbuswins_phys_base,
+					 size_t mbuswins_size,
+					 phys_addr_t sdramwins_phys_base,
+					 size_t sdramwins_size)
+{
+	int win;
+
+	mbus->mbuswins_base = ioremap(mbuswins_phys_base, mbuswins_size);
+	if (!mbus->mbuswins_base)
+		return -ENOMEM;
+
+	mbus->sdramwins_base = ioremap(sdramwins_phys_base, sdramwins_size);
+	if (!mbus->sdramwins_base) {
+		iounmap(mbus_state.mbuswins_base);
+		return -ENOMEM;
+	}
+
+	if (of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric"))
+		mbus->hw_io_coherency = 1;
+
+	for (win = 0; win < mbus->soc->num_wins; win++)
+		mvebu_mbus_disable_window(mbus, win);
+
+	mbus->soc->setup_cpu_target(mbus);
+
+	return 0;
+}
+
 int __init mvebu_mbus_init(const char *soc, phys_addr_t mbuswins_phys_base,
 			   size_t mbuswins_size,
 			   phys_addr_t sdramwins_phys_base,
 			   size_t sdramwins_size)
 {
-	struct mvebu_mbus_state *mbus = &mbus_state;
 	const struct of_device_id *of_id;
-	int win;
 
 	for (of_id = of_mvebu_mbus_ids; of_id->compatible; of_id++)
 		if (!strcmp(of_id->compatible, soc))
@@ -848,25 +739,201 @@ int __init mvebu_mbus_init(const char *soc, phys_addr_t mbuswins_phys_base,
 		return -ENODEV;
 	}
 
-	mbus->soc = of_id->data;
+	mbus_state.soc = of_id->data;
 
-	mbus->mbuswins_base = ioremap(mbuswins_phys_base, mbuswins_size);
-	if (!mbus->mbuswins_base)
-		return -ENOMEM;
+	return mvebu_mbus_common_init(&mbus_state,
+			mbuswins_phys_base,
+			mbuswins_size,
+			sdramwins_phys_base,
+			sdramwins_size);
+}
 
-	mbus->sdramwins_base = ioremap(sdramwins_phys_base, sdramwins_size);
-	if (!mbus->sdramwins_base) {
-		iounmap(mbus_state.mbuswins_base);
+#ifdef CONFIG_OF
+/*
+ * The window IDs in the ranges DT property have the following format:
+ *  - bits 28 to 31: MBus custom field
+ *  - bits 24 to 27: window target ID
+ *  - bits 16 to 23: window attribute ID
+ *  - bits  0 to 15: unused
+ */
+#define CUSTOM(id) (((id) & 0xF0000000) >> 24)
+#define TARGET(id) (((id) & 0x0F000000) >> 24)
+#define ATTR(id)   (((id) & 0x00FF0000) >> 16)
+
+static int __init mbus_dt_setup_win(struct mvebu_mbus_state *mbus,
+				    u32 base, u32 size,
+				    u8 target, u8 attr)
+{
+	if (!mvebu_mbus_window_conflicts(mbus, base, size, target, attr)) {
+		pr_err("cannot add window '%04x:%04x', conflicts with another window\n",
+		       target, attr);
+		return -EBUSY;
+	}
+
+	if (mvebu_mbus_alloc_window(mbus, base, size, MVEBU_MBUS_NO_REMAP,
+				    target, attr)) {
+		pr_err("cannot add window '%04x:%04x', too many windows\n",
+		       target, attr);
 		return -ENOMEM;
 	}
+	return 0;
+}
 
-	if (of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric"))
-		mbus->hw_io_coherency = 1;
+static int __init
+mbus_parse_ranges(struct device_node *node,
+		  int *addr_cells, int *c_addr_cells, int *c_size_cells,
+		  int *cell_count, const __be32 **ranges_start,
+		  const __be32 **ranges_end)
+{
+	const __be32 *prop;
+	int ranges_len, tuple_len;
+
+	/* Allow a node with no 'ranges' property */
+	*ranges_start = of_get_property(node, "ranges", &ranges_len);
+	if (*ranges_start == NULL) {
+		*addr_cells = *c_addr_cells = *c_size_cells = *cell_count = 0;
+		*ranges_start = *ranges_end = NULL;
+		return 0;
+	}
+	*ranges_end = *ranges_start + ranges_len / sizeof(__be32);
 
-	for (win = 0; win < mbus->soc->num_wins; win++)
-		mvebu_mbus_disable_window(mbus, win);
+	*addr_cells = of_n_addr_cells(node);
 
-	mbus->soc->setup_cpu_target(mbus);
+	prop = of_get_property(node, "#address-cells", NULL);
+	*c_addr_cells = be32_to_cpup(prop);
+
+	prop = of_get_property(node, "#size-cells", NULL);
+	*c_size_cells = be32_to_cpup(prop);
+
+	*cell_count = *addr_cells + *c_addr_cells + *c_size_cells;
+	tuple_len = (*cell_count) * sizeof(__be32);
+
+	if (ranges_len % tuple_len) {
+		pr_warn("malformed ranges entry '%s'\n", node->name);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int __init mbus_dt_setup(struct mvebu_mbus_state *mbus,
+				struct device_node *np)
+{
+	int addr_cells, c_addr_cells, c_size_cells;
+	int i, ret, cell_count;
+	const __be32 *r, *ranges_start, *ranges_end;
+
+	ret = mbus_parse_ranges(np, &addr_cells, &c_addr_cells,
+				&c_size_cells, &cell_count,
+				&ranges_start, &ranges_end);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0, r = ranges_start; r < ranges_end; r += cell_count, i++) {
+		u32 windowid, base, size;
+		u8 target, attr;
+
+		/*
+		 * An entry with a non-zero custom field do not
+		 * correspond to a static window, so skip it.
+		 */
+		windowid = of_read_number(r, 1);
+		if (CUSTOM(windowid))
+			continue;
+
+		target = TARGET(windowid);
+		attr = ATTR(windowid);
 
+		base = of_read_number(r + c_addr_cells, addr_cells);
+		size = of_read_number(r + c_addr_cells + addr_cells,
+				      c_size_cells);
+		ret = mbus_dt_setup_win(mbus, base, size, target, attr);
+		if (ret < 0)
+			return ret;
+	}
 	return 0;
 }
+
+static void __init mvebu_mbus_get_pcie_resources(struct device_node *np,
+						 struct resource *mem,
+						 struct resource *io)
+{
+	u32 reg[2];
+	int ret;
+
+	/*
+	 * These are optional, so we clear them and they'll
+	 * be zero if they are missing from the DT.
+	 */
+	memset(mem, 0, sizeof(struct resource));
+	memset(io, 0, sizeof(struct resource));
+
+	ret = of_property_read_u32_array(np, "pcie-mem-aperture", reg, ARRAY_SIZE(reg));
+	if (!ret) {
+		mem->start = reg[0];
+		mem->end = mem->start + reg[1];
+		mem->flags = IORESOURCE_MEM;
+	}
+
+	ret = of_property_read_u32_array(np, "pcie-io-aperture", reg, ARRAY_SIZE(reg));
+	if (!ret) {
+		io->start = reg[0];
+		io->end = io->start + reg[1];
+		io->flags = IORESOURCE_IO;
+	}
+}
+
+int __init mvebu_mbus_dt_init(void)
+{
+	struct resource mbuswins_res, sdramwins_res;
+	struct device_node *np, *controller;
+	const struct of_device_id *of_id;
+	const __be32 *prop;
+	int ret;
+
+	np = of_find_matching_node(NULL, of_mvebu_mbus_ids);
+	if (!np) {
+		pr_err("could not find a matching SoC family\n");
+		return -ENODEV;
+	}
+
+	of_id = of_match_node(of_mvebu_mbus_ids, np);
+	mbus_state.soc = of_id->data;
+
+	prop = of_get_property(np, "controller", NULL);
+	if (!prop) {
+		pr_err("required 'controller' property missing\n");
+		return -EINVAL;
+	}
+
+	controller = of_find_node_by_phandle(be32_to_cpup(prop));
+	if (!controller) {
+		pr_err("could not find an 'mbus-controller' node\n");
+		return -ENODEV;
+	}
+
+	if (of_address_to_resource(controller, 0, &mbuswins_res)) {
+		pr_err("cannot get MBUS register address\n");
+		return -EINVAL;
+	}
+
+	if (of_address_to_resource(controller, 1, &sdramwins_res)) {
+		pr_err("cannot get SDRAM register address\n");
+		return -EINVAL;
+	}
+
+	/* Get optional pcie-{mem,io}-aperture properties */
+	mvebu_mbus_get_pcie_resources(np, &mbus_state.pcie_mem_aperture,
+					  &mbus_state.pcie_io_aperture);
+
+	ret = mvebu_mbus_common_init(&mbus_state,
+				     mbuswins_res.start,
+				     resource_size(&mbuswins_res),
+				     sdramwins_res.start,
+				     resource_size(&sdramwins_res));
+	if (ret)
+		return ret;
+
+	/* Setup statically declared windows in the DT */
+	return mbus_dt_setup(&mbus_state, np);
+}
+#endif

drivers/memory/mvebu-devbus.c

@@ -44,14 +44,6 @@
 #define READ_PARAM_OFFSET	0x0
 #define WRITE_PARAM_OFFSET	0x4
 
-static const char * const devbus_wins[] = {
-	"devbus-boot",
-	"devbus-cs0",
-	"devbus-cs1",
-	"devbus-cs2",
-	"devbus-cs3",
-};
-
 struct devbus_read_params {
 	u32 bus_width;
 	u32 badr_skew;
@@ -208,16 +200,11 @@ static int mvebu_devbus_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct device_node *node = pdev->dev.of_node;
-	struct device_node *parent;
 	struct devbus *devbus;
 	struct resource *res;
 	struct clk *clk;
 	unsigned long rate;
-	const __be32 *ranges;
-	int err, cs;
-	int addr_cells, p_addr_cells, size_cells;
-	int ranges_len, tuple_len;
-	u32 base, size;
+	int err;
 
 	devbus = devm_kzalloc(&pdev->dev, sizeof(struct devbus), GFP_KERNEL);
 	if (!devbus)
@@ -247,69 +234,14 @@ static int mvebu_devbus_probe(struct platform_device *pdev)
 	if (err < 0)
 		return err;
 
-	/*
-	 * Allocate an address window for this device.
-	 * If the device probing fails, then we won't be able to
-	 * remove the allocated address decoding window.
-	 *
-	 * FIXME: This is only a temporary hack! We need to do this here
-	 * because we still don't have device tree bindings for mbus.
-	 * Once that support is added, we will declare these address windows
-	 * statically in the device tree, and remove the window configuration
-	 * from here.
-	 */
-
-	/*
-	 * Get the CS to choose the window string.
-	 * This is a bit hacky, but it will be removed once the
-	 * address windows are declared in the device tree.
-	 */
-	cs = (((unsigned long)devbus->base) % 0x400) / 8;
-
-	/*
-	 * Parse 'ranges' property to obtain a (base,size) window tuple.
-	 * This will be removed once the address windows
-	 * are declared in the device tree.
-	 */
-	parent = of_get_parent(node);
-	if (!parent)
-		return -EINVAL;
-
-	p_addr_cells = of_n_addr_cells(parent);
-	of_node_put(parent);
-
-	addr_cells = of_n_addr_cells(node);
-	size_cells = of_n_size_cells(node);
-	tuple_len = (p_addr_cells + addr_cells + size_cells) * sizeof(__be32);
-
-	ranges = of_get_property(node, "ranges", &ranges_len);
-	if (ranges == NULL || ranges_len != tuple_len)
-		return -EINVAL;
-
-	base = of_translate_address(node, ranges + addr_cells);
-	if (base == OF_BAD_ADDR)
-		return -EINVAL;
-	size = of_read_number(ranges + addr_cells + p_addr_cells, size_cells);
-
-	/*
-	 * Create an mbus address windows.
-	 * FIXME: Remove this, together with the above code, once the
-	 * address windows are declared in the device tree.
-	 */
-	err = mvebu_mbus_add_window(devbus_wins[cs], base, size);
-	if (err < 0)
-		return err;
-
 	/*
 	 * We need to create a child device explicitly from here to
 	 * guarantee that the child will be probed after the timing
 	 * parameters for the bus are written.
 	 */
 	err = of_platform_populate(node, NULL, NULL, dev);
-	if (err < 0) {
-		mvebu_mbus_del_window(base, size);
+	if (err < 0)
 		return err;
-	}
 
 	return 0;
 }

drivers/pci/host/pci-mvebu.c

@@ -123,6 +123,10 @@ struct mvebu_pcie_port {
 	u32 port;
 	u32 lane;
 	int devfn;
+	unsigned int mem_target;
+	unsigned int mem_attr;
+	unsigned int io_target;
+	unsigned int io_attr;
 	struct clk *clk;
 	struct mvebu_sw_pci_bridge bridge;
 	struct device_node *dn;
@@ -307,10 +311,9 @@ static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
 			    (port->bridge.iolimitupper << 16)) -
 			    iobase);
 
-	mvebu_mbus_add_window_remap_flags(port->name, port->iowin_base,
-					  port->iowin_size,
-					  iobase,
-					  MVEBU_MBUS_PCI_IO);
+	mvebu_mbus_add_window_remap_by_id(port->io_target, port->io_attr,
+					  port->iowin_base, port->iowin_size,
+					  iobase);
 
 	pci_ioremap_io(iobase, port->iowin_base);
 }
@@ -342,10 +345,8 @@ static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
 		(((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) -
 		port->memwin_base;
 
-	mvebu_mbus_add_window_remap_flags(port->name, port->memwin_base,
-					  port->memwin_size,
-					  MVEBU_MBUS_NO_REMAP,
-					  MVEBU_MBUS_PCI_MEM);
+	mvebu_mbus_add_window_by_id(port->mem_target, port->mem_attr,
+				    port->memwin_base, port->memwin_size);
 }
 
 /*
@@ -661,6 +662,8 @@ static int __init mvebu_pcie_setup(int nr, struct pci_sys_data *sys)
 
 	for (i = 0; i < pcie->nports; i++) {
 		struct mvebu_pcie_port *port = &pcie->ports[i];
+		if (!port->base)
+			continue;
 		mvebu_pcie_setup_hw(port);
 	}
 
@@ -755,12 +758,54 @@ mvebu_pcie_map_registers(struct platform_device *pdev,
 	return devm_request_and_ioremap(&pdev->dev, &regs);
 }
 
+#define DT_FLAGS_TO_TYPE(flags)       (((flags) >> 24) & 0x03)
+#define    DT_TYPE_IO                 0x1
+#define    DT_TYPE_MEM32              0x2
+#define DT_CPUADDR_TO_TARGET(cpuaddr) (((cpuaddr) >> 56) & 0xFF)
+#define DT_CPUADDR_TO_ATTR(cpuaddr)   (((cpuaddr) >> 48) & 0xFF)
+
+static int mvebu_get_tgt_attr(struct device_node *np, int devfn,
+			      unsigned long type, int *tgt, int *attr)
+{
+	const int na = 3, ns = 2;
+	const __be32 *range;
+	int rlen, nranges, rangesz, pna, i;
+
+	range = of_get_property(np, "ranges", &rlen);
+	if (!range)
+		return -EINVAL;
+
+	pna = of_n_addr_cells(np);
+	rangesz = pna + na + ns;
+	nranges = rlen / sizeof(__be32) / rangesz;
+
+	for (i = 0; i < nranges; i++) {
+		u32 flags = of_read_number(range, 1);
+		u32 slot = of_read_number(range, 2);
+		u64 cpuaddr = of_read_number(range + na, pna);
+		unsigned long rtype;
+
+		if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_IO)
+			rtype = IORESOURCE_IO;
+		else if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_MEM32)
+			rtype = IORESOURCE_MEM;
+
+		if (slot == PCI_SLOT(devfn) && type == rtype) {
+			*tgt = DT_CPUADDR_TO_TARGET(cpuaddr);
+			*attr = DT_CPUADDR_TO_ATTR(cpuaddr);
+			return 0;
+		}
+
+		range += rangesz;
+	}
+
+	return -ENOENT;
+}
+
 static int __init mvebu_pcie_probe(struct platform_device *pdev)
 {
 	struct mvebu_pcie *pcie;
 	struct device_node *np = pdev->dev.of_node;
-	struct of_pci_range range;
-	struct of_pci_range_parser parser;
 	struct device_node *child;
 	int i, ret;
 
@@ -771,29 +816,25 @@ static int __init mvebu_pcie_probe(struct platform_device *pdev)
 
 	pcie->pdev = pdev;
 
-	if (of_pci_range_parser_init(&parser, np))
+	/* Get the PCIe memory and I/O aperture */
+	mvebu_mbus_get_pcie_mem_aperture(&pcie->mem);
+	if (resource_size(&pcie->mem) == 0) {
+		dev_err(&pdev->dev, "invalid memory aperture size\n");
 		return -EINVAL;
+	}
 
-	/* Get the I/O and memory ranges from DT */
-	for_each_of_pci_range(&parser, &range) {
-		unsigned long restype = range.flags & IORESOURCE_TYPE_BITS;
-		if (restype == IORESOURCE_IO) {
-			of_pci_range_to_resource(&range, np, &pcie->io);
-			of_pci_range_to_resource(&range, np, &pcie->realio);
-			pcie->io.name = "I/O";
-			pcie->realio.start = max_t(resource_size_t,
-						   PCIBIOS_MIN_IO,
-						   range.pci_addr);
-			pcie->realio.end = min_t(resource_size_t,
-						 IO_SPACE_LIMIT,
-						 range.pci_addr + range.size);
-		}
-		if (restype == IORESOURCE_MEM) {
-			of_pci_range_to_resource(&range, np, &pcie->mem);
-			pcie->mem.name = "MEM";
-		}
+	mvebu_mbus_get_pcie_io_aperture(&pcie->io);
+	if (resource_size(&pcie->io) == 0) {
+		dev_err(&pdev->dev, "invalid I/O aperture size\n");
+		return -EINVAL;
 	}
 
+	pcie->realio.flags = pcie->io.flags;
+	pcie->realio.start = PCIBIOS_MIN_IO;
+	pcie->realio.end = min_t(resource_size_t,
+				  IO_SPACE_LIMIT,
+				  resource_size(&pcie->io));
+
 	/* Get the bus range */
 	ret = of_pci_parse_bus_range(np, &pcie->busn);
 	if (ret) {
@@ -841,6 +882,22 @@ static int __init mvebu_pcie_probe(struct platform_device *pdev)
 		if (port->devfn < 0)
 			continue;
 
+		ret = mvebu_get_tgt_attr(np, port->devfn, IORESOURCE_MEM,
+					 &port->mem_target, &port->mem_attr);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "PCIe%d.%d: cannot get tgt/attr for mem window\n",
+				port->port, port->lane);
+			continue;
+		}
+
+		ret = mvebu_get_tgt_attr(np, port->devfn, IORESOURCE_IO,
+					 &port->io_target, &port->io_attr);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "PCIe%d.%d: cannot get tgt/attr for io window\n",
+				port->port, port->lane);
+			continue;
+		}
+
 		port->base = mvebu_pcie_map_registers(pdev, child, port);
 		if (!port->base) {
 			dev_err(&pdev->dev, "PCIe%d.%d: cannot map registers\n",

include/linux/mbus.h

@@ -11,6 +11,8 @@
 #ifndef __LINUX_MBUS_H
 #define __LINUX_MBUS_H
 
+struct resource;
+
 struct mbus_dram_target_info
 {
 	/*
@@ -59,14 +61,18 @@ static inline const struct mbus_dram_target_info *mv_mbus_dram_info(void)
 }
 #endif
 
-int mvebu_mbus_add_window_remap_flags(const char *devname, phys_addr_t base,
-				      size_t size, phys_addr_t remap,
-				      unsigned int flags);
-int mvebu_mbus_add_window(const char *devname, phys_addr_t base,
-			  size_t size);
+void mvebu_mbus_get_pcie_mem_aperture(struct resource *res);
+void mvebu_mbus_get_pcie_io_aperture(struct resource *res);
+int mvebu_mbus_add_window_remap_by_id(unsigned int target,
+				      unsigned int attribute,
+				      phys_addr_t base, size_t size,
+				      phys_addr_t remap);
+int mvebu_mbus_add_window_by_id(unsigned int target, unsigned int attribute,
+				phys_addr_t base, size_t size);
 int mvebu_mbus_del_window(phys_addr_t base, size_t size);
 int mvebu_mbus_init(const char *soc, phys_addr_t mbus_phys_base,
 		    size_t mbus_size, phys_addr_t sdram_phys_base,
 		    size_t sdram_size);
+int mvebu_mbus_dt_init(void);
 
 #endif /* __LINUX_MBUS_H */