Merge commit 'v2.6.27-rc6' into core/locking

Documentation/filesystems/Locking

@@ -144,8 +144,8 @@ prototypes:
 	void (*kill_sb) (struct super_block *);
 locking rules:
 		may block	BKL
-get_sb		yes		yes
-kill_sb		yes		yes
+get_sb		yes		no
+kill_sb		yes		no
 
 ->get_sb() returns error or 0 with locked superblock attached to the vfsmount
 (exclusive on ->s_umount).
@@ -409,12 +409,12 @@ ioctl:			yes	(see below)
 unlocked_ioctl:		no	(see below)
 compat_ioctl:		no
 mmap:			no
-open:			maybe	(see below)
+open:			no
 flush:			no
 release:		no
 fsync:			no	(see below)
 aio_fsync:		no
-fasync:			yes	(see below)
+fasync:			no
 lock:			yes
 readv:			no
 writev:			no
@@ -431,13 +431,6 @@ For many filesystems, it is probably safe to acquire the inode
 semaphore.  Note some filesystems (i.e. remote ones) provide no
 protection for i_size so you will need to use the BKL.
 
-->open() locking is in-transit: big lock partially moved into the methods.
-The only exception is ->open() in the instances of file_operations that never
-end up in ->i_fop/->proc_fops, i.e. ones that belong to character devices
-(chrdev_open() takes lock before replacing ->f_op and calling the secondary
-method. As soon as we fix the handling of module reference counters all
-instances of ->open() will be called without the BKL.
-
 Note: ext2_release() was *the* source of contention on fs-intensive
 loads and dropping BKL on ->release() helps to get rid of that (we still
 grab BKL for cases when we close a file that had been opened r/w, but that

Documentation/laptops/thinkpad-acpi.txt

@@ -44,7 +44,7 @@ detailed description):
 	- LCD brightness control
 	- Volume control
 	- Fan control and monitoring: fan speed, fan enable/disable
-	- Experimental: WAN enable and disable
+	- WAN enable and disable
 
 A compatibility table by model and feature is maintained on the web
 site, http://ibm-acpi.sf.net/. I appreciate any success or failure
@@ -1375,18 +1375,13 @@ with EINVAL, try to set pwm1_enable to 1 and pwm1 to at least 128 (255
 would be the safest choice, though).
 
 
-EXPERIMENTAL: WAN
------------------
+WAN
+---
 
 procfs: /proc/acpi/ibm/wan
 sysfs device attribute: wwan_enable (deprecated)
 sysfs rfkill class: switch "tpacpi_wwan_sw"
 
-This feature is marked EXPERIMENTAL because the implementation
-directly accesses hardware registers and may not work as expected. USE
-WITH CAUTION! To use this feature, you need to supply the
-experimental=1 parameter when loading the module.
-
 This feature shows the presence and current state of a W-WAN (Sierra
 Wireless EV-DO) device.
 

Documentation/video4linux/CARDLIST.au0828

@@ -3,3 +3,4 @@
   2 -> Hauppauge HVR850                         (au0828)        [2040:7240]
   3 -> DViCO FusionHDTV USB                     (au0828)        [0fe9:d620]
   4 -> Hauppauge HVR950Q rev xxF8               (au0828)        [2040:7201,2040:7211,2040:7281]
+  5 -> Hauppauge Woodbury                       (au0828)        [2040:8200]

Documentation/video4linux/gspca.txt

@@ -88,14 +88,14 @@ zc3xx		0471:0325	Philips SPC 200 NC
 zc3xx		0471:0326	Philips SPC 300 NC
 sonixj		0471:0327	Philips SPC 600 NC
 sonixj		0471:0328	Philips SPC 700 NC
-zc3xx		0471:032d	Philips spc210nc
-zc3xx		0471:032e	Philips spc315nc
-sonixj		0471:0330	Philips SPC 710NC
+zc3xx		0471:032d	Philips SPC 210 NC
+zc3xx		0471:032e	Philips SPC 315 NC
+sonixj		0471:0330	Philips SPC 710 NC
 spca501		0497:c001	Smile International
 sunplus		04a5:3003	Benq DC 1300
 sunplus		04a5:3008	Benq DC 1500
-sunplus		04a5:300a	Benq DC3410
-spca500		04a5:300c	Benq DC1016
+sunplus		04a5:300a	Benq DC 3410
+spca500		04a5:300c	Benq DC 1016
 sunplus		04f1:1001	JVC GC A50
 spca561		04fc:0561	Flexcam 100
 sunplus		04fc:500c	Sunplus CA500C
@@ -175,19 +175,21 @@ sunplus		08ca:2060	Aiptek PocketDV5300
 tv8532		0923:010f	ICM532 cams
 mars		093a:050f	Mars-Semi Pc-Camera
 pac207		093a:2460	PAC207 Qtec Webcam 100
-pac207		093a:2463	Philips spc200nc pac207
+pac207		093a:2463	Philips SPC 220 NC
 pac207		093a:2464	Labtec Webcam 1200
 pac207		093a:2468	PAC207
 pac207		093a:2470	Genius GF112
-pac207		093a:2471	PAC207 Genius VideoCam ge111
-pac207		093a:2472	PAC207 Genius VideoCam ge110
+pac207		093a:2471	Genius VideoCam ge111
+pac207		093a:2472	Genius VideoCam ge110
 pac7311		093a:2600	PAC7311 Typhoon
-pac7311		093a:2601	PAC7311 Phillips SPC610NC
+pac7311		093a:2601	Philips SPC 610 NC
 pac7311		093a:2603	PAC7312
-pac7311		093a:2608	PAC7311 Trust WB-3300p
-pac7311		093a:260e	PAC7311 Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350
-pac7311		093a:260f	PAC7311 SnakeCam
+pac7311		093a:2608	Trust WB-3300p
+pac7311		093a:260e	Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350
+pac7311		093a:260f	SnakeCam
 pac7311		093a:2621	PAC731x
+pac7311		093a:2624	PAC7302
+pac7311		093a:2626	Labtec 2200
 zc3xx		0ac8:0302	Z-star Vimicro zc0302
 vc032x		0ac8:0321	Vimicro generic vc0321
 vc032x		0ac8:0323	Vimicro Vc0323
@@ -220,6 +222,7 @@ sonixj		0c45:60c0	Sangha Sn535
 sonixj		0c45:60ec	SN9C105+MO4000
 sonixj		0c45:60fb	Surfer NoName
 sonixj		0c45:60fc	LG-LIC300
+sonixj		0c45:6128	Microdia/Sonix SNP325
 sonixj		0c45:612a	Avant Camera
 sonixj		0c45:612c	Typhoon Rasy Cam 1.3MPix
 sonixj		0c45:6130	Sonix Pccam
@@ -234,7 +237,7 @@ zc3xx		10fd:0128	Typhoon Webshot II USB 300k 0x0128
 spca561		10fd:7e50	FlyCam Usb 100
 zc3xx		10fd:8050	Typhoon Webshot II USB 300k
 spca501		1776:501c	Arowana 300K CMOS Camera
-t613		17a1:0128	T613/TAS5130A
+t613		17a1:0128	TASCORP JPEG Webcam, NGS Cyclops
 vc032x		17ef:4802	Lenovo Vc0323+MI1310_SOC
 pac207		2001:f115	D-Link DSB-C120
 spca500		2899:012c	Toptro Industrial

MAINTAINERS

@@ -222,8 +222,7 @@ W:	http://code.google.com/p/aceracpi
 S:	Maintained
 
 ACPI
-P:	Andi Kleen
-M:	ak@linux.intel.com
+P:	Len Brown
 M:	lenb@kernel.org
 L:	linux-acpi@vger.kernel.org
 W:	http://www.lesswatts.org/projects/acpi/
@@ -751,11 +750,13 @@ P:	Ville Syrjala
 M:	syrjala@sci.fi
 S:	Maintained
 
-ATL1 ETHERNET DRIVER
+ATLX ETHERNET DRIVERS
 P:	Jay Cliburn
 M:	jcliburn@gmail.com
 P:	Chris Snook
 M:	csnook@redhat.com
+P:	Jie Yang
+M:	jie.yang@atheros.com
 L:	atl1-devel@lists.sourceforge.net
 W:	http://sourceforge.net/projects/atl1
 W:	http://atl1.sourceforge.net
@@ -1594,7 +1595,7 @@ S:	Supported
 EMBEDDED LINUX
 P:	Paul Gortmaker
 M:	paul.gortmaker@windriver.com
-P	David Woodhouse
+P:	David Woodhouse
 M:	dwmw2@infradead.org
 L:	linux-embedded@vger.kernel.org
 S:	Maintained

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 27
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME = Rotary Wombat
 
 # *DOCUMENTATION*

arch/arm/include/asm/byteorder.h

@@ -18,15 +18,7 @@
 #include <linux/compiler.h>
 #include <asm/types.h>
 
-#ifdef __ARMEB__
-# define __BIG_ENDIAN
-#else
-# define __LITTLE_ENDIAN
-#endif
-
-#define __SWAB_64_THRU_32__
-
-static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
+static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
 {
 	__u32 t;
 
@@ -48,8 +40,19 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
 
 	return x;
 }
-#define __arch_swab32 __arch_swab32
 
-#include <linux/byteorder.h>
+#define __arch__swab32(x) ___arch__swab32(x)
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#ifdef __ARMEB__
+#include <linux/byteorder/big_endian.h>
+#else
+#include <linux/byteorder/little_endian.h>
+#endif
 
 #endif
+

arch/arm/include/asm/io.h

@@ -61,8 +61,9 @@ extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
 #define MT_DEVICE_NONSHARED	1
 #define MT_DEVICE_CACHED	2
 #define MT_DEVICE_IXP2000	3
+#define MT_DEVICE_WC		4
 /*
- * types 4 onwards can be found in asm/mach/map.h and are undefined
+ * types 5 onwards can be found in asm/mach/map.h and are undefined
  * for ioremap
  */
 
@@ -215,11 +216,13 @@ extern void _memset_io(volatile void __iomem *, int, size_t);
 #define ioremap(cookie,size)		__arm_ioremap(cookie, size, MT_DEVICE)
 #define ioremap_nocache(cookie,size)	__arm_ioremap(cookie, size, MT_DEVICE)
 #define ioremap_cached(cookie,size)	__arm_ioremap(cookie, size, MT_DEVICE_CACHED)
+#define ioremap_wc(cookie,size)		__arm_ioremap(cookie, size, MT_DEVICE_WC)
 #define iounmap(cookie)			__iounmap(cookie)
 #else
 #define ioremap(cookie,size)		__arch_ioremap((cookie), (size), MT_DEVICE)
 #define ioremap_nocache(cookie,size)	__arch_ioremap((cookie), (size), MT_DEVICE)
 #define ioremap_cached(cookie,size)	__arch_ioremap((cookie), (size), MT_DEVICE_CACHED)
+#define ioremap_wc(cookie,size)		__arch_ioremap((cookie), (size), MT_DEVICE_WC)
 #define iounmap(cookie)			__arch_iounmap(cookie)
 #endif
 

arch/arm/include/asm/mach/map.h

@@ -18,13 +18,13 @@ struct map_desc {
 	unsigned int type;
 };
 
-/* types 0-3 are defined in asm/io.h */
-#define MT_CACHECLEAN		4
-#define MT_MINICLEAN		5
-#define MT_LOW_VECTORS		6
-#define MT_HIGH_VECTORS		7
-#define MT_MEMORY		8
-#define MT_ROM			9
+/* types 0-4 are defined in asm/io.h */
+#define MT_CACHECLEAN		5
+#define MT_MINICLEAN		6
+#define MT_LOW_VECTORS		7
+#define MT_HIGH_VECTORS		8
+#define MT_MEMORY		9
+#define MT_ROM			10
 
 #define MT_NONSHARED_DEVICE	MT_DEVICE_NONSHARED
 #define MT_IXP2000_DEVICE	MT_DEVICE_IXP2000

arch/arm/mach-omap1/mcbsp.c

@@ -159,6 +159,7 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = {
 #ifdef CONFIG_ARCH_OMAP730
 static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
 	{
+		.phys_base	= OMAP730_MCBSP1_BASE,
 		.virt_base	= io_p2v(OMAP730_MCBSP1_BASE),
 		.dma_rx_sync	= OMAP_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP1_TX,
@@ -167,6 +168,7 @@ static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
 		.ops		= &omap1_mcbsp_ops,
 	},
 	{
+		.phys_base	= OMAP730_MCBSP2_BASE,
 		.virt_base	= io_p2v(OMAP730_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP_DMA_MCBSP3_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP3_TX,
@@ -184,6 +186,7 @@ static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
 #ifdef CONFIG_ARCH_OMAP15XX
 static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 	{
+		.phys_base	= OMAP1510_MCBSP1_BASE,
 		.virt_base	= OMAP1510_MCBSP1_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP1_TX,
@@ -193,6 +196,7 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 		.clk_name	= "mcbsp_clk",
 		},
 	{
+		.phys_base	= OMAP1510_MCBSP2_BASE,
 		.virt_base	= io_p2v(OMAP1510_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP_DMA_MCBSP2_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP2_TX,
@@ -201,6 +205,7 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 		.ops		= &omap1_mcbsp_ops,
 	},
 	{
+		.phys_base	= OMAP1510_MCBSP3_BASE,
 		.virt_base	= OMAP1510_MCBSP3_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP3_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP3_TX,
@@ -219,6 +224,7 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 #ifdef CONFIG_ARCH_OMAP16XX
 static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 	{
+		.phys_base	= OMAP1610_MCBSP1_BASE,
 		.virt_base	= OMAP1610_MCBSP1_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP1_TX,
@@ -228,6 +234,7 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 		.clk_name	= "mcbsp_clk",
 	},
 	{
+		.phys_base	= OMAP1610_MCBSP2_BASE,
 		.virt_base	= io_p2v(OMAP1610_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP_DMA_MCBSP2_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP2_TX,
@@ -236,6 +243,7 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 		.ops		= &omap1_mcbsp_ops,
 	},
 	{
+		.phys_base	= OMAP1610_MCBSP3_BASE,
 		.virt_base	= OMAP1610_MCBSP3_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP3_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP3_TX,

arch/arm/mach-omap2/mcbsp.c

@@ -134,6 +134,7 @@ static struct omap_mcbsp_ops omap2_mcbsp_ops = {
 #ifdef CONFIG_ARCH_OMAP24XX
 static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = {
 	{
+		.phys_base	= OMAP24XX_MCBSP1_BASE,
 		.virt_base	= IO_ADDRESS(OMAP24XX_MCBSP1_BASE),
 		.dma_rx_sync	= OMAP24XX_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP1_TX,
@@ -143,6 +144,7 @@ static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = {
 		.clk_name	= "mcbsp_clk",
 	},
 	{
+		.phys_base	= OMAP24XX_MCBSP2_BASE,
 		.virt_base	= IO_ADDRESS(OMAP24XX_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP24XX_DMA_MCBSP2_RX,
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP2_TX,
@@ -161,6 +163,7 @@ static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = {
 #ifdef CONFIG_ARCH_OMAP34XX
 static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 	{
+		.phys_base	= OMAP34XX_MCBSP1_BASE,
 		.virt_base	= IO_ADDRESS(OMAP34XX_MCBSP1_BASE),
 		.dma_rx_sync	= OMAP24XX_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP1_TX,
@@ -170,6 +173,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.clk_name	= "mcbsp_clk",
 	},
 	{
+		.phys_base	= OMAP34XX_MCBSP2_BASE,
 		.virt_base	= IO_ADDRESS(OMAP34XX_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP24XX_DMA_MCBSP2_RX,
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP2_TX,

arch/arm/mm/mmu.c

@@ -211,6 +211,12 @@ static struct mem_type mem_types[] = {
 				  PMD_SECT_TEX(1),
 		.domain		= DOMAIN_IO,
 	},
+	[MT_DEVICE_WC] = {	/* ioremap_wc */
+		.prot_pte	= PROT_PTE_DEVICE,
+		.prot_l1	= PMD_TYPE_TABLE,
+		.prot_sect	= PROT_SECT_DEVICE,
+		.domain		= DOMAIN_IO,
+	},
 	[MT_CACHECLEAN] = {
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_XN,
 		.domain    = DOMAIN_KERNEL,
@@ -272,6 +278,20 @@ static void __init build_mem_type_table(void)
 		ecc_mask = 0;
 	}
 
+	/*
+	 * On non-Xscale3 ARMv5-and-older systems, use CB=01
+	 * (Uncached/Buffered) for ioremap_wc() mappings.  On XScale3
+	 * and ARMv6+, use TEXCB=00100 mappings (Inner/Outer Uncacheable
+	 * in xsc3 parlance, Uncached Normal in ARMv6 parlance).
+	 */
+	if (cpu_is_xsc3() || cpu_arch >= CPU_ARCH_ARMv6) {
+		mem_types[MT_DEVICE_WC].prot_pte_ext |= PTE_EXT_TEX(1);
+		mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1);
+	} else {
+		mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_BUFFERABLE;
+		mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE;
+	}
+
 	/*
 	 * ARMv5 and lower, bit 4 must be set for page tables.
 	 * (was: cache "update-able on write" bit on ARM610)

arch/arm/plat-mxc/clock.c

@@ -37,7 +37,6 @@
 #include <linux/proc_fs.h>
 #include <linux/semaphore.h>
 #include <linux/string.h>
-#include <linux/version.h>
 
 #include <mach/clock.h>
 

arch/arm/plat-omap/gpio.c

@@ -1488,7 +1488,7 @@ static int __init _omap_gpio_init(void)
 		bank->chip.set = gpio_set;
 		if (bank_is_mpuio(bank)) {
 			bank->chip.label = "mpuio";
-#ifdef CONFIG_ARCH_OMAP1
+#ifdef CONFIG_ARCH_OMAP16XX
 			bank->chip.dev = &omap_mpuio_device.dev;
 #endif
 			bank->chip.base = OMAP_MPUIO(0);

arch/arm/plat-omap/include/mach/mcbsp.h

@@ -315,6 +315,7 @@ struct omap_mcbsp_ops {
 };
 
 struct omap_mcbsp_platform_data {
+	unsigned long phys_base;
 	u32 virt_base;
 	u8 dma_rx_sync, dma_tx_sync;
 	u16 rx_irq, tx_irq;
@@ -324,6 +325,7 @@ struct omap_mcbsp_platform_data {
 
 struct omap_mcbsp {
 	struct device *dev;
+	unsigned long phys_base;
 	u32 io_base;
 	u8 id;
 	u8 free;

arch/arm/plat-omap/mcbsp.c

@@ -651,7 +651,7 @@ int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer,
 	omap_set_dma_dest_params(mcbsp[id].dma_tx_lch,
 				 src_port,
 				 OMAP_DMA_AMODE_CONSTANT,
-				 mcbsp[id].io_base + OMAP_MCBSP_REG_DXR1,
+				 mcbsp[id].phys_base + OMAP_MCBSP_REG_DXR1,
 				 0, 0);
 
 	omap_set_dma_src_params(mcbsp[id].dma_tx_lch,
@@ -712,7 +712,7 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer,
 	omap_set_dma_src_params(mcbsp[id].dma_rx_lch,
 				src_port,
 				OMAP_DMA_AMODE_CONSTANT,
-				mcbsp[id].io_base + OMAP_MCBSP_REG_DRR1,
+				mcbsp[id].phys_base + OMAP_MCBSP_REG_DRR1,
 				0, 0);
 
 	omap_set_dma_dest_params(mcbsp[id].dma_rx_lch,
@@ -830,6 +830,7 @@ static int __init omap_mcbsp_probe(struct platform_device *pdev)
 	mcbsp[id].dma_tx_lch = -1;
 	mcbsp[id].dma_rx_lch = -1;
 
+	mcbsp[id].phys_base = pdata->phys_base;
 	mcbsp[id].io_base = pdata->virt_base;
 	/* Default I/O is IRQ based */
 	mcbsp[id].io_type = OMAP_MCBSP_IRQ_IO;

arch/avr32/kernel/asm-offsets.c

@@ -4,6 +4,8 @@
  * to extract and format the required data.
  */
 
+#include <linux/mm.h>
+#include <linux/sched.h>
 #include <linux/thread_info.h>
 #include <linux/kbuild.h>
 
@@ -17,4 +19,8 @@ void foo(void)
 	OFFSET(TI_rar_saved, thread_info, rar_saved);
 	OFFSET(TI_rsr_saved, thread_info, rsr_saved);
 	OFFSET(TI_restart_block, thread_info, restart_block);
+	BLANK();
+	OFFSET(TSK_active_mm, task_struct, active_mm);
+	BLANK();
+	OFFSET(MM_pgd, mm_struct, pgd);
 }

arch/avr32/kernel/entry-avr32b.S

@@ -334,9 +334,64 @@ save_full_context_ex:
 
 	/* Low-level exception handlers */
 handle_critical:
+	/*
+	 * AT32AP700x errata:
+	 *
+	 * After a Java stack overflow or underflow trap, any CPU
+	 * memory access may cause erratic behavior. This will happen
+	 * when the four least significant bits of the JOSP system
+	 * register contains any value between 9 and 15 (inclusive).
+	 *
+	 * Possible workarounds:
+	 *   - Don't use the Java Extension Module
+	 *   - Ensure that the stack overflow and underflow trap
+	 *     handlers do not do any memory access or trigger any
+	 *     exceptions before the overflow/underflow condition is
+	 *     cleared (by incrementing or decrementing the JOSP)
+	 *   - Make sure that JOSP does not contain any problematic
+	 *     value before doing any exception or interrupt
+	 *     processing.
+	 *   - Set up a critical exception handler which writes a
+	 *     known-to-be-safe value, e.g. 4, to JOSP before doing
+	 *     any further processing.
+	 *
+	 * We'll use the last workaround for now since we cannot
+	 * guarantee that user space processes don't use Java mode.
+	 * Non-well-behaving userland will be terminated with extreme
+	 * prejudice.
+	 */
+#ifdef CONFIG_CPU_AT32AP700X
+	/*
+	 * There's a chance we can't touch memory, so temporarily
+	 * borrow PTBR to save the stack pointer while we fix things
+	 * up...
+	 */
+	mtsr	SYSREG_PTBR, sp
+	mov	sp, 4
+	mtsr	SYSREG_JOSP, sp
+	mfsr	sp, SYSREG_PTBR
+	sub	pc, -2
+
+	/* Push most of pt_regs on stack. We'll do the rest later */
 	sub	sp, 4
-	stmts	--sp, r0-lr
-	rcall	save_full_context_ex
+	pushm	r0-r12
+
+	/* PTBR mirrors current_thread_info()->task->active_mm->pgd */
+	get_thread_info r0
+	ld.w	r1, r0[TI_task]
+	ld.w	r2, r1[TSK_active_mm]
+	ld.w	r3, r2[MM_pgd]
+	mtsr	SYSREG_PTBR, r3
+#else
+	sub	sp, 4
+	pushm	r0-r12
+#endif
+	sub	r0, sp, -(14 * 4)
+	mov	r1, lr
+	mfsr	r2, SYSREG_RAR_EX
+	mfsr	r3, SYSREG_RSR_EX
+	pushm	r0-r3
+
 	mfsr	r12, SYSREG_ECR
 	mov	r11, sp
 	rcall	do_critical_exception

arch/avr32/mach-at32ap/pm-at32ap700x.S

@@ -134,7 +134,7 @@ pm_standby:
 	mov	r11, SDRAMC_LPR_LPCB_SELF_RFR
 	bfins	r10, r11, 0, 2		/* LPCB <- self Refresh */
 	sync	0			/* flush write buffer */
-	st.w	r12[SDRAMC_LPR], r11	/* put SDRAM in self-refresh mode */
+	st.w	r12[SDRAMC_LPR], r10	/* put SDRAM in self-refresh mode */
 	ld.w	r11, r12[SDRAMC_LPR]
 	unmask_interrupts
 	sleep	CPU_SLEEP_FROZEN

arch/ia64/include/asm/sections.h

@@ -21,5 +21,8 @@ extern char __start_gate_brl_fsys_bubble_down_patchlist[], __end_gate_brl_fsys_b
 extern char __start_unwind[], __end_unwind[];
 extern char __start_ivt_text[], __end_ivt_text[];
 
+#undef dereference_function_descriptor
+void *dereference_function_descriptor(void *);
+
 #endif /* _ASM_IA64_SECTIONS_H */
 

arch/ia64/kernel/module.c

@@ -31,9 +31,11 @@
 #include <linux/elf.h>
 #include <linux/moduleloader.h>
 #include <linux/string.h>
+#include <linux/uaccess.h>
 #include <linux/vmalloc.h>
 
 #include <asm/patch.h>
+#include <asm/sections.h>
 #include <asm/unaligned.h>
 
 #define ARCH_MODULE_DEBUG 0
@@ -941,3 +943,13 @@ module_arch_cleanup (struct module *mod)
 	if (mod->arch.core_unw_table)
 		unw_remove_unwind_table(mod->arch.core_unw_table);
 }
+
+void *dereference_function_descriptor(void *ptr)
+{
+	struct fdesc *desc = ptr;
+	void *p;
+
+	if (!probe_kernel_address(&desc->ip, p))
+		ptr = p;
+	return ptr;
+}

arch/mips/Kconfig

@@ -1886,6 +1886,15 @@ config STACKTRACE_SUPPORT
 
 source "init/Kconfig"
 
+config PROBE_INITRD_HEADER
+	bool "Probe initrd header created by addinitrd"
+	depends on BLK_DEV_INITRD
+	help
+	  Probe initrd header at the last page of kernel image.
+	  Say Y here if you are using arch/mips/boot/addinitrd.c to
+	  add initrd or initramfs image to the kernel image.
+	  Otherwise, say N.
+
 menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
 
 config HW_HAS_EISA

arch/mips/kernel/setup.c

@@ -160,30 +160,33 @@ early_param("rd_size", rd_size_early);
 static unsigned long __init init_initrd(void)
 {
 	unsigned long end;
-	u32 *initrd_header;
 
 	/*
 	 * Board specific code or command line parser should have
 	 * already set up initrd_start and initrd_end. In these cases
 	 * perfom sanity checks and use them if all looks good.
 	 */
-	if (initrd_start && initrd_end > initrd_start)
-		goto sanitize;
+	if (!initrd_start || initrd_end <= initrd_start) {
+#ifdef CONFIG_PROBE_INITRD_HEADER
+		u32 *initrd_header;
 
-	/*
-	 * See if initrd has been added to the kernel image by
-	 * arch/mips/boot/addinitrd.c. In that case a header is
-	 * prepended to initrd and is made up by 8 bytes. The fisrt
-	 * word is a magic number and the second one is the size of
-	 * initrd.  Initrd start must be page aligned in any cases.
-	 */
-	initrd_header = __va(PAGE_ALIGN(__pa_symbol(&_end) + 8)) - 8;
-	if (initrd_header[0] != 0x494E5244)
+		/*
+		 * See if initrd has been added to the kernel image by
+		 * arch/mips/boot/addinitrd.c. In that case a header is
+		 * prepended to initrd and is made up by 8 bytes. The first
+		 * word is a magic number and the second one is the size of
+		 * initrd.  Initrd start must be page aligned in any cases.
+		 */
+		initrd_header = __va(PAGE_ALIGN(__pa_symbol(&_end) + 8)) - 8;
+		if (initrd_header[0] != 0x494E5244)
+			goto disable;
+		initrd_start = (unsigned long)(initrd_header + 2);
+		initrd_end = initrd_start + initrd_header[1];
+#else
 		goto disable;
-	initrd_start = (unsigned long)(initrd_header + 2);
-	initrd_end = initrd_start + initrd_header[1];
+#endif
+	}
 
-sanitize:
 	if (initrd_start & ~PAGE_MASK) {
 		pr_err("initrd start must be page aligned\n");
 		goto disable;

arch/mips/kernel/traps.c

@@ -373,8 +373,8 @@ void __noreturn die(const char * str, const struct pt_regs * regs)
 	do_exit(SIGSEGV);
 }
 
-extern const struct exception_table_entry __start___dbe_table[];
-extern const struct exception_table_entry __stop___dbe_table[];
+extern struct exception_table_entry __start___dbe_table[];
+extern struct exception_table_entry __stop___dbe_table[];
 
 __asm__(
 "	.section	__dbe_table, \"a\"\n"
@@ -1200,7 +1200,7 @@ void *set_except_vector(int n, void *addr)
 	if (n == 0 && cpu_has_divec) {
 		*(u32 *)(ebase + 0x200) = 0x08000000 |
 					  (0x03ffffff & (handler >> 2));
-		flush_icache_range(ebase + 0x200, ebase + 0x204);
+		local_flush_icache_range(ebase + 0x200, ebase + 0x204);
 	}
 	return (void *)old_handler;
 }
@@ -1283,7 +1283,8 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 		*w = (*w & 0xffff0000) | (((u32)handler >> 16) & 0xffff);
 		w = (u32 *)(b + ori_offset);
 		*w = (*w & 0xffff0000) | ((u32)handler & 0xffff);
-		flush_icache_range((unsigned long)b, (unsigned long)(b+handler_len));
+		local_flush_icache_range((unsigned long)b,
+					 (unsigned long)(b+handler_len));
 	}
 	else {
 		/*
@@ -1295,7 +1296,8 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 		w = (u32 *)b;
 		*w++ = 0x08000000 | (((u32)handler >> 2) & 0x03fffff); /* j handler */
 		*w = 0;
-		flush_icache_range((unsigned long)b, (unsigned long)(b+8));
+		local_flush_icache_range((unsigned long)b,
+					 (unsigned long)(b+8));
 	}
 
 	return (void *)old_handler;
@@ -1515,7 +1517,7 @@ void __cpuinit per_cpu_trap_init(void)
 void __init set_handler(unsigned long offset, void *addr, unsigned long size)
 {
 	memcpy((void *)(ebase + offset), addr, size);
-	flush_icache_range(ebase + offset, ebase + offset + size);
+	local_flush_icache_range(ebase + offset, ebase + offset + size);
 }
 
 static char panic_null_cerr[] __cpuinitdata =
@@ -1680,6 +1682,8 @@ void __init trap_init(void)
 	signal32_init();
 #endif
 
-	flush_icache_range(ebase, ebase + 0x400);
+	local_flush_icache_range(ebase, ebase + 0x400);
 	flush_tlb_handlers();
+
+	sort_extable(__start___dbe_table, __stop___dbe_table);
 }

arch/mips/mm/c-r3k.c

@@ -320,6 +320,7 @@ void __cpuinit r3k_cache_init(void)
 	flush_cache_range = r3k_flush_cache_range;
 	flush_cache_page = r3k_flush_cache_page;
 	flush_icache_range = r3k_flush_icache_range;
+	local_flush_icache_range = r3k_flush_icache_range;
 
 	flush_cache_sigtramp = r3k_flush_cache_sigtramp;
 	local_flush_data_cache_page = local_r3k_flush_data_cache_page;

arch/mips/mm/c-r4k.c

@@ -543,12 +543,8 @@ struct flush_icache_range_args {
 	unsigned long end;
 };
 
-static inline void local_r4k_flush_icache_range(void *args)
+static inline void local_r4k_flush_icache_range(unsigned long start, unsigned long end)
 {
-	struct flush_icache_range_args *fir_args = args;
-	unsigned long start = fir_args->start;
-	unsigned long end = fir_args->end;
-
 	if (!cpu_has_ic_fills_f_dc) {
 		if (end - start >= dcache_size) {
 			r4k_blast_dcache();
@@ -564,6 +560,15 @@ static inline void local_r4k_flush_icache_range(void *args)
 		protected_blast_icache_range(start, end);
 }
 
+static inline void local_r4k_flush_icache_range_ipi(void *args)
+{
+	struct flush_icache_range_args *fir_args = args;
+	unsigned long start = fir_args->start;
+	unsigned long end = fir_args->end;
+
+	local_r4k_flush_icache_range(start, end);
+}
+
 static void r4k_flush_icache_range(unsigned long start, unsigned long end)
 {
 	struct flush_icache_range_args args;
@@ -571,7 +576,7 @@ static void r4k_flush_icache_range(unsigned long start, unsigned long end)
 	args.start = start;
 	args.end = end;
 
-	r4k_on_each_cpu(local_r4k_flush_icache_range, &args, 1);
+	r4k_on_each_cpu(local_r4k_flush_icache_range_ipi, &args, 1);
 	instruction_hazard();
 }
 
@@ -1375,6 +1380,7 @@ void __cpuinit r4k_cache_init(void)
 	local_flush_data_cache_page	= local_r4k_flush_data_cache_page;
 	flush_data_cache_page	= r4k_flush_data_cache_page;
 	flush_icache_range	= r4k_flush_icache_range;
+	local_flush_icache_range	= local_r4k_flush_icache_range;
 
 #if defined(CONFIG_DMA_NONCOHERENT)
 	if (coherentio) {

arch/mips/mm/c-tx39.c

@@ -362,6 +362,7 @@ void __cpuinit tx39_cache_init(void)
 		flush_cache_range	= (void *) tx39h_flush_icache_all;
 		flush_cache_page	= (void *) tx39h_flush_icache_all;
 		flush_icache_range	= (void *) tx39h_flush_icache_all;
+		local_flush_icache_range = (void *) tx39h_flush_icache_all;
 
 		flush_cache_sigtramp	= (void *) tx39h_flush_icache_all;
 		local_flush_data_cache_page	= (void *) tx39h_flush_icache_all;
@@ -390,6 +391,7 @@ void __cpuinit tx39_cache_init(void)
 		flush_cache_range = tx39_flush_cache_range;
 		flush_cache_page = tx39_flush_cache_page;
 		flush_icache_range = tx39_flush_icache_range;
+		local_flush_icache_range = tx39_flush_icache_range;
 
 		flush_cache_sigtramp = tx39_flush_cache_sigtramp;
 		local_flush_data_cache_page = local_tx39_flush_data_cache_page;

arch/mips/mm/cache.c

@@ -29,6 +29,7 @@ void (*flush_cache_range)(struct vm_area_struct *vma, unsigned long start,
 void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page,
 	unsigned long pfn);
 void (*flush_icache_range)(unsigned long start, unsigned long end);
+void (*local_flush_icache_range)(unsigned long start, unsigned long end);
 
 void (*__flush_cache_vmap)(void);
 void (*__flush_cache_vunmap)(void);

arch/mips/mm/tlbex.c

@@ -1273,10 +1273,10 @@ void __cpuinit build_tlb_refill_handler(void)
 
 void __cpuinit flush_tlb_handlers(void)
 {
-	flush_icache_range((unsigned long)handle_tlbl,
+	local_flush_icache_range((unsigned long)handle_tlbl,
 			   (unsigned long)handle_tlbl + sizeof(handle_tlbl));
-	flush_icache_range((unsigned long)handle_tlbs,
+	local_flush_icache_range((unsigned long)handle_tlbs,
 			   (unsigned long)handle_tlbs + sizeof(handle_tlbs));
-	flush_icache_range((unsigned long)handle_tlbm,
+	local_flush_icache_range((unsigned long)handle_tlbm,
 			   (unsigned long)handle_tlbm + sizeof(handle_tlbm));
 }

arch/mips/sgi-ip22/ip22-platform.c

@@ -150,7 +150,7 @@ static int __init sgiseeq_devinit(void)
 		return res;
 
 	/* Second HPC is missing? */
-	if (!ip22_is_fullhouse() ||
+	if (ip22_is_fullhouse() ||
 	    get_dbe(tmp, (unsigned int *)&hpc3c1->pbdma[1]))
 		return 0;
 

arch/mips/txx9/generic/setup.c

@@ -53,6 +53,7 @@ txx9_reg_res_init(unsigned int pcode, unsigned long base, unsigned long size)
 		txx9_ce_res[i].name = txx9_ce_res_name[i];
 	}
 
+	txx9_pcode = pcode;
 	sprintf(txx9_pcode_str, "TX%x", pcode);
 	if (base) {
 		txx9_reg_res.start = base & 0xfffffffffULL;

arch/parisc/kernel/module.c

@@ -47,7 +47,9 @@
 #include <linux/string.h>
 #include <linux/kernel.h>
 #include <linux/bug.h>
+#include <linux/uaccess.h>
 
+#include <asm/sections.h>
 #include <asm/unwind.h>
 
 #if 0
@@ -860,3 +862,15 @@ void module_arch_cleanup(struct module *mod)
 	deregister_unwind_table(mod);
 	module_bug_cleanup(mod);
 }
+
+#ifdef CONFIG_64BIT
+void *dereference_function_descriptor(void *ptr)
+{
+	Elf64_Fdesc *desc = ptr;
+	void *p;
+
+	if (!probe_kernel_address(&desc->addr, p))
+		ptr = p;
+	return ptr;
+}
+#endif

arch/powerpc/boot/Makefile

@@ -49,7 +49,7 @@ zlib       := inffast.c inflate.c inftrees.c
 zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h
 zliblinuxheader := zlib.h zconf.h zutil.h
 
-$(addprefix $(obj)/,$(zlib) gunzip_util.o main.o): \
+$(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \
 	$(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
 
 src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c

arch/powerpc/include/asm/sections.h

@@ -16,6 +16,9 @@ static inline int in_kernel_text(unsigned long addr)
 	return 0;
 }
 
+#undef dereference_function_descriptor
+void *dereference_function_descriptor(void *);
+
 #endif
 
 #endif /* __KERNEL__ */

arch/powerpc/kernel/module_64.c

@@ -21,8 +21,9 @@
 #include <linux/err.h>
 #include <linux/vmalloc.h>
 #include <linux/bug.h>
+#include <linux/uaccess.h>
 #include <asm/module.h>
-#include <asm/uaccess.h>
+#include <asm/sections.h>
 #include <asm/firmware.h>
 #include <asm/code-patching.h>
 #include <linux/sort.h>
@@ -451,3 +452,13 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 
 	return 0;
 }
+
+void *dereference_function_descriptor(void *ptr)
+{
+	struct ppc64_opd_entry *desc = ptr;
+	void *p;
+
+	if (!probe_kernel_address(&desc->funcaddr, p))
+		ptr = p;
+	return ptr;
+}

arch/powerpc/platforms/cell/spufs/sched.c

@@ -643,9 +643,10 @@ static struct spu *find_victim(struct spu_context *ctx)
 			    !(tmp->flags & SPU_CREATE_NOSCHED) &&
 			    (!victim || tmp->prio > victim->prio)) {
 				victim = spu->ctx;
-				get_spu_context(victim);
 			}
 		}
+		if (victim)
+			get_spu_context(victim);
 		mutex_unlock(&cbe_spu_info[node].list_mutex);
 
 		if (victim) {
@@ -727,17 +728,33 @@ static void spu_schedule(struct spu *spu, struct spu_context *ctx)
 	/* not a candidate for interruptible because it's called either
 	   from the scheduler thread or from spu_deactivate */
 	mutex_lock(&ctx->state_mutex);
-	__spu_schedule(spu, ctx);
+	if (ctx->state == SPU_STATE_SAVED)
+		__spu_schedule(spu, ctx);
 	spu_release(ctx);
 }
 
-static void spu_unschedule(struct spu *spu, struct spu_context *ctx)
+/**
+ * spu_unschedule - remove a context from a spu, and possibly release it.
+ * @spu:	The SPU to unschedule from
+ * @ctx:	The context currently scheduled on the SPU
+ * @free_spu	Whether to free the SPU for other contexts
+ *
+ * Unbinds the context @ctx from the SPU @spu. If @free_spu is non-zero, the
+ * SPU is made available for other contexts (ie, may be returned by
+ * spu_get_idle). If this is zero, the caller is expected to schedule another
+ * context to this spu.
+ *
+ * Should be called with ctx->state_mutex held.
+ */
+static void spu_unschedule(struct spu *spu, struct spu_context *ctx,
+		int free_spu)
 {
 	int node = spu->node;
 
 	mutex_lock(&cbe_spu_info[node].list_mutex);
 	cbe_spu_info[node].nr_active--;
-	spu->alloc_state = SPU_FREE;
+	if (free_spu)
+		spu->alloc_state = SPU_FREE;
 	spu_unbind_context(spu, ctx);
 	ctx->stats.invol_ctx_switch++;
 	spu->stats.invol_ctx_switch++;
@@ -837,7 +854,7 @@ static int __spu_deactivate(struct spu_context *ctx, int force, int max_prio)
 	if (spu) {
 		new = grab_runnable_context(max_prio, spu->node);
 		if (new || force) {
-			spu_unschedule(spu, ctx);
+			spu_unschedule(spu, ctx, new == NULL);
 			if (new) {
 				if (new->flags & SPU_CREATE_NOSCHED)
 					wake_up(&new->stop_wq);
@@ -910,7 +927,7 @@ static noinline void spusched_tick(struct spu_context *ctx)
 
 	new = grab_runnable_context(ctx->prio + 1, spu->node);
 	if (new) {
-		spu_unschedule(spu, ctx);
+		spu_unschedule(spu, ctx, 0);
 		if (test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags))
 			spu_add_to_rq(ctx);
 	} else {

arch/s390/kernel/compat_ptrace.h

@@ -42,6 +42,7 @@ struct user_regs_struct32
 	u32 gprs[NUM_GPRS];
 	u32 acrs[NUM_ACRS];
 	u32 orig_gpr2;
+	/* nb: there's a 4-byte hole here */
 	s390_fp_regs fp_regs;
 	/*
 	 * These per registers are in here so that gdb can modify them

arch/s390/kernel/ptrace.c

@@ -170,6 +170,13 @@ static unsigned long __peek_user(struct task_struct *child, addr_t addr)
 		 */
 		tmp = (addr_t) task_pt_regs(child)->orig_gpr2;
 
+	} else if (addr < (addr_t) &dummy->regs.fp_regs) {
+		/*
+		 * prevent reads of padding hole between
+		 * orig_gpr2 and fp_regs on s390.
+		 */
+		tmp = 0;
+
 	} else if (addr < (addr_t) (&dummy->regs.fp_regs + 1)) {
 		/* 
 		 * floating point regs. are stored in the thread structure
@@ -270,6 +277,13 @@ static int __poke_user(struct task_struct *child, addr_t addr, addr_t data)
 		 */
 		task_pt_regs(child)->orig_gpr2 = data;
 
+	} else if (addr < (addr_t) &dummy->regs.fp_regs) {
+		/*
+		 * prevent writes of padding hole between
+		 * orig_gpr2 and fp_regs on s390.
+		 */
+		return 0;
+
 	} else if (addr < (addr_t) (&dummy->regs.fp_regs + 1)) {
 		/*
 		 * floating point regs. are stored in the thread structure
@@ -428,6 +442,13 @@ static u32 __peek_user_compat(struct task_struct *child, addr_t addr)
 		 */
 		tmp = *(__u32*)((addr_t) &task_pt_regs(child)->orig_gpr2 + 4);
 
+	} else if (addr < (addr_t) &dummy32->regs.fp_regs) {
+		/*
+		 * prevent reads of padding hole between
+		 * orig_gpr2 and fp_regs on s390.
+		 */
+		tmp = 0;
+
 	} else if (addr < (addr_t) (&dummy32->regs.fp_regs + 1)) {
 		/*
 		 * floating point regs. are stored in the thread structure 
@@ -514,6 +535,13 @@ static int __poke_user_compat(struct task_struct *child,
 		 */
 		*(__u32*)((addr_t) &task_pt_regs(child)->orig_gpr2 + 4) = tmp;
 
+	} else if (addr < (addr_t) &dummy32->regs.fp_regs) {
+		/*
+		 * prevent writess of padding hole between
+		 * orig_gpr2 and fp_regs on s390.
+		 */
+		return 0;
+
 	} else if (addr < (addr_t) (&dummy32->regs.fp_regs + 1)) {
 		/*
 		 * floating point regs. are stored in the thread structure 

arch/sh/configs/ap325rxa_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 01:18:59 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 14:21:17 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,6 +11,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
@@ -20,7 +21,6 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -58,7 +58,6 @@ CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -89,6 +88,7 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_USE_GENERIC_SMP_HELPERS is not set
 CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -261,9 +261,10 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
@@ -289,10 +290,6 @@ CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp"
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -647,6 +644,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -690,7 +688,10 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_UIO_SMX is not set
 
 #
 # File systems
@@ -854,6 +855,7 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set

arch/sh/configs/migor_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 01:44:41 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 14:18:17 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,6 +11,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
@@ -21,7 +22,6 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -87,6 +87,7 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_USE_GENERIC_SMP_HELPERS is not set
 CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -270,6 +271,7 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -294,10 +296,6 @@ CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on"
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -649,6 +647,7 @@ CONFIG_HW_RANDOM=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
@@ -709,6 +708,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -755,6 +755,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -842,7 +844,10 @@ CONFIG_RTC_DRV_RS5C372=y
 #
 CONFIG_RTC_DRV_SH=y
 # CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_UIO_SMX is not set
 
 #
 # File systems

arch/sh/include/asm/uaccess_64.h

@@ -76,4 +76,6 @@ extern long __put_user_asm_l(void *, long);
 extern long __put_user_asm_q(void *, long);
 extern void __put_user_unknown(void);
 
+extern long __strnlen_user(const char *__s, long __n);
+
 #endif /* __ASM_SH_UACCESS_64_H */

arch/sh/kernel/cpu/sh5/entry.S

@@ -2,7 +2,7 @@
  * arch/sh/kernel/cpu/sh5/entry.S
  *
  * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2004 - 2007  Paul Mundt
+ * Copyright (C) 2004 - 2008  Paul Mundt
  * Copyright (C) 2003, 2004  Richard Curnow
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -923,6 +923,8 @@ ret_from_exception:
 	blink   tr0, ZERO
 
 resume_kernel:
+	CLI()
+
 	pta	restore_all, tr0
 
 	getcon	KCR0, r6
@@ -939,19 +941,11 @@ need_resched:
 	andi	r7, 0xf0, r7
 	bne	r7, ZERO, tr0
 
-	movi	((PREEMPT_ACTIVE >> 16) & 65535), r8
-	shori	(PREEMPT_ACTIVE & 65535), r8
-	st.l	r6, TI_PRE_COUNT, r8
-
-	STI()
-	movi	schedule, r7
+	movi	preempt_schedule_irq, r7
 	ori	r7, 1, r7
 	ptabs	r7, tr1
 	blink	tr1, LINK
 
-	st.l	r6, TI_PRE_COUNT, ZERO
-	CLI()
-
 	pta	need_resched, tr1
 	blink	tr1, ZERO
 #endif

arch/sh/kernel/entry-common.S

@@ -92,6 +92,7 @@ ENTRY(ret_from_irq)
 	bra	resume_userspace
 	 nop
 ENTRY(resume_kernel)
+	cli
 	mov.l	@(TI_PRE_COUNT,r8), r0	! current_thread_info->preempt_count
 	tst	r0, r0
 	bf	noresched
@@ -105,28 +106,9 @@ need_resched:
 	and	#0xf0, r0		! interrupts off (exception path)?
 	cmp/eq	#0xf0, r0
 	bt	noresched
-
-	mov.l	1f, r0
-	mov.l	r0, @(TI_PRE_COUNT,r8)
-
-#ifdef CONFIG_TRACE_IRQFLAGS
 	mov.l	3f, r0
-	jsr	@r0
-	 nop
-#endif
-	sti
-	mov.l	2f, r0
-	jsr	@r0
-	 nop
-	mov	#0, r0
-	mov.l	r0, @(TI_PRE_COUNT,r8)
-	cli
-#ifdef CONFIG_TRACE_IRQFLAGS
-	mov.l	4f, r0
-	jsr	@r0
+	jsr	@r0			! call preempt_schedule_irq
 	 nop
-#endif
-
 	bra	need_resched
 	 nop
 
@@ -137,10 +119,7 @@ noresched:
 	.align 2
 1:	.long	PREEMPT_ACTIVE
 2:	.long	schedule
-#ifdef CONFIG_TRACE_IRQFLAGS
-3:	.long	trace_hardirqs_on
-4:	.long	trace_hardirqs_off
-#endif
+3:	.long	preempt_schedule_irq
 #endif
 
 ENTRY(resume_userspace)

arch/sh/kernel/machine_kexec.c

@@ -102,7 +102,7 @@ void machine_kexec(struct kimage *image)
 
 	/* now call it */
 	rnk = (relocate_new_kernel_t) reboot_code_buffer;
-	(*rnk)(page_list, reboot_code_buffer, image->start, vbr_reg);
+	(*rnk)(page_list, reboot_code_buffer, P2SEGADDR(image->start), vbr_reg);
 }
 
 void arch_crash_save_vmcoreinfo(void)

arch/sh/kernel/ptrace_64.c

@@ -131,6 +131,8 @@ void user_enable_single_step(struct task_struct *child)
 
 void user_disable_single_step(struct task_struct *child)
 {
+	struct pt_regs *regs = child->thread.uregs;
+
 	regs->sr &= ~SR_SSTEP;
 }
 

arch/sh/kernel/setup.c

@@ -171,6 +171,7 @@ static void __init reserve_crashkernel(void)
 				(unsigned long)(free_mem >> 20));
 		crashk_res.start = crash_base;
 		crashk_res.end   = crash_base + crash_size - 1;
+		insert_resource(&iomem_resource, &crashk_res);
 	}
 }
 #else
@@ -204,11 +205,6 @@ void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
 	request_resource(res, &data_resource);
 	request_resource(res, &bss_resource);
 
-#ifdef CONFIG_KEXEC
-	if (crashk_res.start != crashk_res.end)
-		request_resource(res, &crashk_res);
-#endif
-
 	add_active_range(nid, start_pfn, end_pfn);
 }
 

arch/sh/kernel/sys_sh.c

@@ -170,7 +170,7 @@ asmlinkage int sys_ipc(uint call, int first, int second,
 	version = call >> 16; /* hack for backward compatibility */
 	call &= 0xffff;
 
-	if (call <= SEMCTL)
+	if (call <= SEMTIMEDOP)
 		switch (call) {
 		case SEMOP:
 			return sys_semtimedop(first,

arch/sh/mm/consistent.c

@@ -101,7 +101,7 @@ static int __init memchunk_setup(char *str)
 }
 __setup("memchunk.", memchunk_setup);
 
-static void memchunk_cmdline_override(char *name, unsigned long *sizep)
+static void __init memchunk_cmdline_override(char *name, unsigned long *sizep)
 {
 	char *p = boot_command_line;
 	int k = strlen(name);
@@ -118,8 +118,8 @@ static void memchunk_cmdline_override(char *name, unsigned long *sizep)
 	}
 }
 
-int platform_resource_setup_memory(struct platform_device *pdev,
-				   char *name, unsigned long memsize)
+int __init platform_resource_setup_memory(struct platform_device *pdev,
+					  char *name, unsigned long memsize)
 {
 	struct resource *r;
 	dma_addr_t dma_handle;

arch/sparc64/kernel/irq.c

@@ -792,6 +792,8 @@ void fixup_irqs(void)
 		}
 		spin_unlock_irqrestore(&irq_desc[irq].lock, flags);
 	}
+
+	tick_ops->disable_irq();
 }
 #endif
 

arch/sparc64/kernel/smp.c

@@ -80,8 +80,6 @@ void smp_bogo(struct seq_file *m)
 			   i, cpu_data(i).clock_tick);
 }
 
-static __cacheline_aligned_in_smp DEFINE_SPINLOCK(call_lock);
-
 extern void setup_sparc64_timer(void);
 
 static volatile unsigned long callin_flag = 0;
@@ -120,9 +118,9 @@ void __cpuinit smp_callin(void)
 	while (!cpu_isset(cpuid, smp_commenced_mask))
 		rmb();
 
-	spin_lock(&call_lock);
+	ipi_call_lock();
 	cpu_set(cpuid, cpu_online_map);
-	spin_unlock(&call_lock);
+	ipi_call_unlock();
 
 	/* idle thread is expected to have preempt disabled */
 	preempt_disable();
@@ -1305,10 +1303,6 @@ int __cpu_disable(void)
 	c->core_id = 0;
 	c->proc_id = -1;
 
-	spin_lock(&call_lock);
-	cpu_clear(cpu, cpu_online_map);
-	spin_unlock(&call_lock);
-
 	smp_wmb();
 
 	/* Make sure no interrupts point to this cpu.  */
@@ -1318,6 +1312,10 @@ int __cpu_disable(void)
 	mdelay(1);
 	local_irq_disable();
 
+	ipi_call_lock();
+	cpu_clear(cpu, cpu_online_map);
+	ipi_call_unlock();
+
 	return 0;
 }
 

arch/x86/Kconfig.cpu

@@ -382,14 +382,17 @@ config X86_OOSTORE
 # P6_NOPs are a relatively minor optimization that require a family >=
 # 6 processor, except that it is broken on certain VIA chips.
 # Furthermore, AMD chips prefer a totally different sequence of NOPs
-# (which work on all CPUs).  As a result, disallow these if we're
-# compiling X86_GENERIC but not X86_64 (these NOPs do work on all
-# x86-64 capable chips); the list of processors in the right-hand clause
-# are the cores that benefit from this optimization.
+# (which work on all CPUs).  In addition, it looks like Virtual PC
+# does not understand them.
+#
+# As a result, disallow these if we're not compiling for X86_64 (these
+# NOPs do work on all x86-64 capable chips); the list of processors in
+# the right-hand clause are the cores that benefit from this optimization.
 #
 config X86_P6_NOP
 	def_bool y
-	depends on (X86_64 || !X86_GENERIC) && (M686 || MPENTIUMII || MPENTIUMIII || MPENTIUMM || MCORE2 || MPENTIUM4 || MPSC)
+	depends on X86_64
+	depends on (MCORE2 || MPENTIUM4 || MPSC)
 
 config X86_TSC
 	def_bool y

arch/x86/boot/cpucheck.c

@@ -38,12 +38,12 @@ static const u32 req_flags[NCAPINTS] =
 {
 	REQUIRED_MASK0,
 	REQUIRED_MASK1,
-	REQUIRED_MASK2,
-	REQUIRED_MASK3,
+	0, /* REQUIRED_MASK2 not implemented in this file */
+	0, /* REQUIRED_MASK3 not implemented in this file */
 	REQUIRED_MASK4,
-	REQUIRED_MASK5,
+	0, /* REQUIRED_MASK5 not implemented in this file */
 	REQUIRED_MASK6,
-	REQUIRED_MASK7,
+	0, /* REQUIRED_MASK7 not implemented in this file */
 };
 
 #define A32(a, b, c, d) (((d) << 24)+((c) << 16)+((b) << 8)+(a))

arch/x86/kernel/alternative.c

@@ -145,35 +145,25 @@ static const unsigned char *const p6_nops[ASM_NOP_MAX+1] = {
 extern char __vsyscall_0;
 const unsigned char *const *find_nop_table(void)
 {
-	return boot_cpu_data.x86_vendor != X86_VENDOR_INTEL ||
-	       boot_cpu_data.x86 < 6 ? k8_nops : p6_nops;
+	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
+	    boot_cpu_has(X86_FEATURE_NOPL))
+		return p6_nops;
+	else
+		return k8_nops;
 }
 
 #else /* CONFIG_X86_64 */
 
-static const struct nop {
-	int cpuid;
-	const unsigned char *const *noptable;
-} noptypes[] = {
-	{ X86_FEATURE_K8, k8_nops },
-	{ X86_FEATURE_K7, k7_nops },
-	{ X86_FEATURE_P4, p6_nops },
-	{ X86_FEATURE_P3, p6_nops },
-	{ -1, NULL }
-};
-
 const unsigned char *const *find_nop_table(void)
 {
-	const unsigned char *const *noptable = intel_nops;
-	int i;
-
-	for (i = 0; noptypes[i].cpuid >= 0; i++) {
-		if (boot_cpu_has(noptypes[i].cpuid)) {
-			noptable = noptypes[i].noptable;
-			break;
-		}
-	}
-	return noptable;
+	if (boot_cpu_has(X86_FEATURE_K8))
+		return k8_nops;
+	else if (boot_cpu_has(X86_FEATURE_K7))
+		return k7_nops;
+	else if (boot_cpu_has(X86_FEATURE_NOPL))
+		return p6_nops;
+	else
+		return intel_nops;
 }
 
 #endif /* CONFIG_X86_64 */

arch/x86/kernel/cpu/amd.c

@@ -31,6 +31,11 @@ static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
 		if (c->x86_power & (1<<8))
 			set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
 	}
+
+	/*  Set MTRR capability flag if appropriate */
+	if (c->x86_model == 13 || c->x86_model == 9 ||
+	   (c->x86_model == 8 && c->x86_mask >= 8))
+		set_cpu_cap(c, X86_FEATURE_K6_MTRR);
 }
 
 static void __cpuinit init_amd(struct cpuinfo_x86 *c)
@@ -166,10 +171,6 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 						mbytes);
 				}
 
-				/*  Set MTRR capability flag if appropriate */
-				if (c->x86_model == 13 || c->x86_model == 9 ||
-				   (c->x86_model == 8 && c->x86_mask >= 8))
-					set_cpu_cap(c, X86_FEATURE_K6_MTRR);
 				break;
 			}
 

arch/x86/kernel/cpu/centaur.c

@@ -314,6 +314,16 @@ enum {
 		EAMD3D		= 1<<20,
 };
 
+static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c)
+{
+	switch (c->x86) {
+	case 5:
+		/* Emulate MTRRs using Centaur's MCR. */
+		set_cpu_cap(c, X86_FEATURE_CENTAUR_MCR);
+		break;
+	}
+}
+
 static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
 {
 
@@ -462,6 +472,7 @@ centaur_size_cache(struct cpuinfo_x86 *c, unsigned int size)
 static struct cpu_dev centaur_cpu_dev __cpuinitdata = {
 	.c_vendor	= "Centaur",
 	.c_ident	= { "CentaurHauls" },
+	.c_early_init	= early_init_centaur,
 	.c_init		= init_centaur,
 	.c_size_cache	= centaur_size_cache,
 };

arch/x86/kernel/cpu/common.c

@@ -13,6 +13,7 @@
 #include <asm/mtrr.h>
 #include <asm/mce.h>
 #include <asm/pat.h>
+#include <asm/asm.h>
 #ifdef CONFIG_X86_LOCAL_APIC
 #include <asm/mpspec.h>
 #include <asm/apic.h>
@@ -334,11 +335,40 @@ static void __init early_cpu_detect(void)
 
 	get_cpu_vendor(c, 1);
 
+	early_get_cap(c);
+
 	if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
 	    cpu_devs[c->x86_vendor]->c_early_init)
 		cpu_devs[c->x86_vendor]->c_early_init(c);
+}
 
-	early_get_cap(c);
+/*
+ * The NOPL instruction is supposed to exist on all CPUs with
+ * family >= 6, unfortunately, that's not true in practice because
+ * of early VIA chips and (more importantly) broken virtualizers that
+ * are not easy to detect.  Hence, probe for it based on first
+ * principles.
+ */
+static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
+{
+	const u32 nopl_signature = 0x888c53b1; /* Random number */
+	u32 has_nopl = nopl_signature;
+
+	clear_cpu_cap(c, X86_FEATURE_NOPL);
+	if (c->x86 >= 6) {
+		asm volatile("\n"
+			     "1:      .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */
+			     "2:\n"
+			     "        .section .fixup,\"ax\"\n"
+			     "3:      xor %0,%0\n"
+			     "        jmp 2b\n"
+			     "        .previous\n"
+			     _ASM_EXTABLE(1b,3b)
+			     : "+a" (has_nopl));
+
+		if (has_nopl == nopl_signature)
+			set_cpu_cap(c, X86_FEATURE_NOPL);
+	}
 }
 
 static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
@@ -395,8 +425,8 @@ static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
 		}
 
 		init_scattered_cpuid_features(c);
+		detect_nopl(c);
 	}
-
 }
 
 static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c)

arch/x86/kernel/cpu/common_64.c

@@ -18,6 +18,7 @@
 #include <asm/mtrr.h>
 #include <asm/mce.h>
 #include <asm/pat.h>
+#include <asm/asm.h>
 #include <asm/numa.h>
 #ifdef CONFIG_X86_LOCAL_APIC
 #include <asm/mpspec.h>
@@ -215,6 +216,39 @@ static void __init early_cpu_support_print(void)
 	}
 }
 
+/*
+ * The NOPL instruction is supposed to exist on all CPUs with
+ * family >= 6, unfortunately, that's not true in practice because
+ * of early VIA chips and (more importantly) broken virtualizers that
+ * are not easy to detect.  Hence, probe for it based on first
+ * principles.
+ *
+ * Note: no 64-bit chip is known to lack these, but put the code here
+ * for consistency with 32 bits, and to make it utterly trivial to
+ * diagnose the problem should it ever surface.
+ */
+static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
+{
+	const u32 nopl_signature = 0x888c53b1; /* Random number */
+	u32 has_nopl = nopl_signature;
+
+	clear_cpu_cap(c, X86_FEATURE_NOPL);
+	if (c->x86 >= 6) {
+		asm volatile("\n"
+			     "1:      .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */
+			     "2:\n"
+			     "        .section .fixup,\"ax\"\n"
+			     "3:      xor %0,%0\n"
+			     "        jmp 2b\n"
+			     "        .previous\n"
+			     _ASM_EXTABLE(1b,3b)
+			     : "+a" (has_nopl));
+
+		if (has_nopl == nopl_signature)
+			set_cpu_cap(c, X86_FEATURE_NOPL);
+	}
+}
+
 static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c);
 
 void __init early_cpu_init(void)
@@ -313,6 +347,8 @@ static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
 		c->x86_phys_bits = eax & 0xff;
 	}
 
+	detect_nopl(c);
+
 	if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
 	    cpu_devs[c->x86_vendor]->c_early_init)
 		cpu_devs[c->x86_vendor]->c_early_init(c);
@@ -493,17 +529,20 @@ void pda_init(int cpu)
 		/* others are initialized in smpboot.c */
 		pda->pcurrent = &init_task;
 		pda->irqstackptr = boot_cpu_stack;
+		pda->irqstackptr += IRQSTACKSIZE - 64;
 	} else {
-		pda->irqstackptr = (char *)
-			__get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER);
-		if (!pda->irqstackptr)
-			panic("cannot allocate irqstack for cpu %d", cpu);
+		if (!pda->irqstackptr) {
+			pda->irqstackptr = (char *)
+				__get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER);
+			if (!pda->irqstackptr)
+				panic("cannot allocate irqstack for cpu %d",
+				      cpu);
+			pda->irqstackptr += IRQSTACKSIZE - 64;
+		}
 
 		if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE)
 			pda->nodenumber = cpu_to_node(cpu);
 	}
-
-	pda->irqstackptr += IRQSTACKSIZE-64;
 }
 
 char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ +
@@ -601,19 +640,22 @@ void __cpuinit cpu_init(void)
 	/*
 	 * set up and load the per-CPU TSS
 	 */
-	for (v = 0; v < N_EXCEPTION_STACKS; v++) {
+	if (!orig_ist->ist[0]) {
 		static const unsigned int order[N_EXCEPTION_STACKS] = {
-			[0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
-			[DEBUG_STACK - 1] = DEBUG_STACK_ORDER
+		  [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
+		  [DEBUG_STACK - 1] = DEBUG_STACK_ORDER
 		};
-		if (cpu) {
-			estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]);
-			if (!estacks)
-				panic("Cannot allocate exception stack %ld %d\n",
-				      v, cpu);
+		for (v = 0; v < N_EXCEPTION_STACKS; v++) {
+			if (cpu) {
+				estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]);
+				if (!estacks)
+					panic("Cannot allocate exception "
+					      "stack %ld %d\n", v, cpu);
+			}
+			estacks += PAGE_SIZE << order[v];
+			orig_ist->ist[v] = t->x86_tss.ist[v] =
+					(unsigned long)estacks;
 		}
-		estacks += PAGE_SIZE << order[v];
-		orig_ist->ist[v] = t->x86_tss.ist[v] = (unsigned long)estacks;
 	}
 
 	t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);

arch/x86/kernel/cpu/cyrix.c

@@ -15,13 +15,11 @@
 /*
  * Read NSC/Cyrix DEVID registers (DIR) to get more detailed info. about the CPU
  */
-static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
+static void __cpuinit __do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
 {
 	unsigned char ccr2, ccr3;
-	unsigned long flags;
 
 	/* we test for DEVID by checking whether CCR3 is writable */
-	local_irq_save(flags);
 	ccr3 = getCx86(CX86_CCR3);
 	setCx86(CX86_CCR3, ccr3 ^ 0x80);
 	getCx86(0xc0);   /* dummy to change bus */
@@ -44,9 +42,16 @@ static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
 		*dir0 = getCx86(CX86_DIR0);
 		*dir1 = getCx86(CX86_DIR1);
 	}
-	local_irq_restore(flags);
 }
 
+static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	__do_cyrix_devid(dir0, dir1);
+	local_irq_restore(flags);
+}
 /*
  * Cx86_dir0_msb is a HACK needed by check_cx686_cpuid/slop in bugs.h in
  * order to identify the Cyrix CPU model after we're out of setup.c
@@ -161,6 +166,24 @@ static void __cpuinit geode_configure(void)
 	local_irq_restore(flags);
 }
 
+static void __cpuinit early_init_cyrix(struct cpuinfo_x86 *c)
+{
+	unsigned char dir0, dir0_msn, dir1 = 0;
+
+	__do_cyrix_devid(&dir0, &dir1);
+	dir0_msn = dir0 >> 4; /* identifies CPU "family"   */
+
+	switch (dir0_msn) {
+	case 3: /* 6x86/6x86L */
+		/* Emulate MTRRs using Cyrix's ARRs. */
+		set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
+		break;
+	case 5: /* 6x86MX/M II */
+		/* Emulate MTRRs using Cyrix's ARRs. */
+		set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
+		break;
+	}
+}
 
 static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
 {
@@ -416,6 +439,7 @@ static void __cpuinit cyrix_identify(struct cpuinfo_x86 *c)
 static struct cpu_dev cyrix_cpu_dev __cpuinitdata = {
 	.c_vendor	= "Cyrix",
 	.c_ident	= { "CyrixInstead" },
+	.c_early_init	= early_init_cyrix,
 	.c_init		= init_cyrix,
 	.c_identify	= cyrix_identify,
 };

arch/x86/kernel/cpu/feature_names.c

@@ -39,7 +39,8 @@ const char * const x86_cap_flags[NCAPINTS*32] = {
 	NULL, NULL, NULL, NULL,
 	"constant_tsc", "up", NULL, "arch_perfmon",
 	"pebs", "bts", NULL, NULL,
-	"rep_good", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+	"rep_good", NULL, NULL, NULL,
+	"nopl", NULL, NULL, NULL,
 	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 
 	/* Intel-defined (#2) */

arch/x86/kernel/e820.c

@@ -1203,7 +1203,7 @@ static int __init parse_memmap_opt(char *p)
 	if (!p)
 		return -EINVAL;
 
-	if (!strcmp(p, "exactmap")) {
+	if (!strncmp(p, "exactmap", 8)) {
 #ifdef CONFIG_CRASH_DUMP
 		/*
 		 * If we are doing a crash dump, we still need to know

arch/x86/kernel/hpet.c

@@ -210,8 +210,8 @@ static void hpet_legacy_clockevent_register(void)
 	/* Calculate the min / max delta */
 	hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF,
 							   &hpet_clockevent);
-	hpet_clockevent.min_delta_ns = clockevent_delta2ns(0x30,
-							   &hpet_clockevent);
+	/* 5 usec minimum reprogramming delta. */
+	hpet_clockevent.min_delta_ns = 5000;
 
 	/*
 	 * Start hpet with the boot cpu mask and make it
@@ -270,15 +270,22 @@ static void hpet_legacy_set_mode(enum clock_event_mode mode,
 }
 
 static int hpet_legacy_next_event(unsigned long delta,
-			   struct clock_event_device *evt)
+				  struct clock_event_device *evt)
 {
-	unsigned long cnt;
+	u32 cnt;
 
 	cnt = hpet_readl(HPET_COUNTER);
-	cnt += delta;
+	cnt += (u32) delta;
 	hpet_writel(cnt, HPET_T0_CMP);
 
-	return ((long)(hpet_readl(HPET_COUNTER) - cnt ) > 0) ? -ETIME : 0;
+	/*
+	 * We need to read back the CMP register to make sure that
+	 * what we wrote hit the chip before we compare it to the
+	 * counter.
+	 */
+	WARN_ON((u32)hpet_readl(HPET_T0_CMP) != cnt);
+
+	return (s32)((u32)hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0;
 }
 
 /*

arch/x86/kernel/io_delay.c

@@ -92,6 +92,14 @@ static struct dmi_system_id __initdata io_delay_0xed_port_dmi_table[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "30BF")
 		}
 	},
+	{
+		.callback	= dmi_io_delay_0xed_port,
+		.ident		= "Presario F700",
+		.matches	= {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Quanta"),
+			DMI_MATCH(DMI_BOARD_NAME, "30D3")
+		}
+	},
 	{ }
 };
 

arch/x86/kernel/tsc.c

@@ -267,8 +267,7 @@ unsigned long native_calibrate_tsc(void)
 	 */
 	if (tsc_pit_min == ULONG_MAX) {
 		/* PIT gave no useful value */
-		printk(KERN_WARNING "TSC: PIT calibration failed due to "
-		       "SMI disturbance.\n");
+		printk(KERN_WARNING "TSC: Unable to calibrate against PIT\n");
 
 		/* We don't have an alternative source, disable TSC */
 		if (!hpet && !pm1 && !pm2) {

arch/x86/xen/enlighten.c

@@ -1324,7 +1324,7 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = {
 	.ptep_modify_prot_commit = __ptep_modify_prot_commit,
 
 	.pte_val = xen_pte_val,
-	.pte_flags = native_pte_val,
+	.pte_flags = native_pte_flags,
 	.pgd_val = xen_pgd_val,
 
 	.make_pte = xen_make_pte,

crypto/async_tx/async_tx.c

@@ -137,7 +137,8 @@ async_tx_run_dependencies(struct dma_async_tx_descriptor *tx)
 		spin_lock_bh(&next->lock);
 		next->parent = NULL;
 		_next = next->next;
-		next->next = NULL;
+		if (_next && _next->chan == chan)
+			next->next = NULL;
 		spin_unlock_bh(&next->lock);
 
 		next->tx_submit(next);

crypto/camellia.c

@@ -35,8 +35,6 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/bitops.h>
-#include <asm/unaligned.h>
 
 static const u32 camellia_sp1110[256] = {
 	0x70707000,0x82828200,0x2c2c2c00,0xececec00,
@@ -337,6 +335,20 @@ static const u32 camellia_sp4404[256] = {
 /*
  *  macros
  */
+#define GETU32(v, pt) \
+    do { \
+	/* latest breed of gcc is clever enough to use move */ \
+	memcpy(&(v), (pt), 4); \
+	(v) = be32_to_cpu(v); \
+    } while(0)
+
+/* rotation right shift 1byte */
+#define ROR8(x) (((x) >> 8) + ((x) << 24))
+/* rotation left shift 1bit */
+#define ROL1(x) (((x) << 1) + ((x) >> 31))
+/* rotation left shift 1byte */
+#define ROL8(x) (((x) << 8) + ((x) >> 24))
+
 #define ROLDQ(ll, lr, rl, rr, w0, w1, bits)		\
     do {						\
 	w0 = ll;					\
@@ -371,7 +383,7 @@ static const u32 camellia_sp4404[256] = {
 	   ^ camellia_sp3033[(u8)(il >> 8)]			\
 	   ^ camellia_sp4404[(u8)(il     )];			\
 	yl ^= yr;						\
-	yr = ror32(yr, 8);					\
+	yr = ROR8(yr);						\
 	yr ^= yl;						\
     } while(0)
 
@@ -393,7 +405,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	subL[7] ^= subL[1]; subR[7] ^= subR[1];
 	subL[1] ^= subR[1] & ~subR[9];
 	dw = subL[1] & subL[9],
-		subR[1] ^= rol32(dw, 1); /* modified for FLinv(kl2) */
+		subR[1] ^= ROL1(dw); /* modified for FLinv(kl2) */
 	/* round 8 */
 	subL[11] ^= subL[1]; subR[11] ^= subR[1];
 	/* round 10 */
@@ -402,7 +414,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	subL[15] ^= subL[1]; subR[15] ^= subR[1];
 	subL[1] ^= subR[1] & ~subR[17];
 	dw = subL[1] & subL[17],
-		subR[1] ^= rol32(dw, 1); /* modified for FLinv(kl4) */
+		subR[1] ^= ROL1(dw); /* modified for FLinv(kl4) */
 	/* round 14 */
 	subL[19] ^= subL[1]; subR[19] ^= subR[1];
 	/* round 16 */
@@ -418,7 +430,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	} else {
 		subL[1] ^= subR[1] & ~subR[25];
 		dw = subL[1] & subL[25],
-			subR[1] ^= rol32(dw, 1); /* modified for FLinv(kl6) */
+			subR[1] ^= ROL1(dw); /* modified for FLinv(kl6) */
 		/* round 20 */
 		subL[27] ^= subL[1]; subR[27] ^= subR[1];
 		/* round 22 */
@@ -438,7 +450,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 		subL[26] ^= kw4l; subR[26] ^= kw4r;
 		kw4l ^= kw4r & ~subR[24];
 		dw = kw4l & subL[24],
-			kw4r ^= rol32(dw, 1); /* modified for FL(kl5) */
+			kw4r ^= ROL1(dw); /* modified for FL(kl5) */
 	}
 	/* round 17 */
 	subL[22] ^= kw4l; subR[22] ^= kw4r;
@@ -448,7 +460,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	subL[18] ^= kw4l; subR[18] ^= kw4r;
 	kw4l ^= kw4r & ~subR[16];
 	dw = kw4l & subL[16],
-		kw4r ^= rol32(dw, 1); /* modified for FL(kl3) */
+		kw4r ^= ROL1(dw); /* modified for FL(kl3) */
 	/* round 11 */
 	subL[14] ^= kw4l; subR[14] ^= kw4r;
 	/* round 9 */
@@ -457,7 +469,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	subL[10] ^= kw4l; subR[10] ^= kw4r;
 	kw4l ^= kw4r & ~subR[8];
 	dw = kw4l & subL[8],
-		kw4r ^= rol32(dw, 1); /* modified for FL(kl1) */
+		kw4r ^= ROL1(dw); /* modified for FL(kl1) */
 	/* round 5 */
 	subL[6] ^= kw4l; subR[6] ^= kw4r;
 	/* round 3 */
@@ -482,7 +494,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	SUBKEY_R(6) = subR[5] ^ subR[7];
 	tl = subL[10] ^ (subR[10] & ~subR[8]);
 	dw = tl & subL[8],  /* FL(kl1) */
-		tr = subR[10] ^ rol32(dw, 1);
+		tr = subR[10] ^ ROL1(dw);
 	SUBKEY_L(7) = subL[6] ^ tl; /* round 6 */
 	SUBKEY_R(7) = subR[6] ^ tr;
 	SUBKEY_L(8) = subL[8];       /* FL(kl1) */
@@ -491,7 +503,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	SUBKEY_R(9) = subR[9];
 	tl = subL[7] ^ (subR[7] & ~subR[9]);
 	dw = tl & subL[9],  /* FLinv(kl2) */
-		tr = subR[7] ^ rol32(dw, 1);
+		tr = subR[7] ^ ROL1(dw);
 	SUBKEY_L(10) = tl ^ subL[11]; /* round 7 */
 	SUBKEY_R(10) = tr ^ subR[11];
 	SUBKEY_L(11) = subL[10] ^ subL[12]; /* round 8 */
@@ -504,7 +516,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	SUBKEY_R(14) = subR[13] ^ subR[15];
 	tl = subL[18] ^ (subR[18] & ~subR[16]);
 	dw = tl & subL[16], /* FL(kl3) */
-		tr = subR[18] ^ rol32(dw, 1);
+		tr = subR[18] ^ ROL1(dw);
 	SUBKEY_L(15) = subL[14] ^ tl; /* round 12 */
 	SUBKEY_R(15) = subR[14] ^ tr;
 	SUBKEY_L(16) = subL[16];     /* FL(kl3) */
@@ -513,7 +525,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	SUBKEY_R(17) = subR[17];
 	tl = subL[15] ^ (subR[15] & ~subR[17]);
 	dw = tl & subL[17], /* FLinv(kl4) */
-		tr = subR[15] ^ rol32(dw, 1);
+		tr = subR[15] ^ ROL1(dw);
 	SUBKEY_L(18) = tl ^ subL[19]; /* round 13 */
 	SUBKEY_R(18) = tr ^ subR[19];
 	SUBKEY_L(19) = subL[18] ^ subL[20]; /* round 14 */
@@ -532,7 +544,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	} else {
 		tl = subL[26] ^ (subR[26] & ~subR[24]);
 		dw = tl & subL[24], /* FL(kl5) */
-			tr = subR[26] ^ rol32(dw, 1);
+			tr = subR[26] ^ ROL1(dw);
 		SUBKEY_L(23) = subL[22] ^ tl; /* round 18 */
 		SUBKEY_R(23) = subR[22] ^ tr;
 		SUBKEY_L(24) = subL[24];     /* FL(kl5) */
@@ -541,7 +553,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 		SUBKEY_R(25) = subR[25];
 		tl = subL[23] ^ (subR[23] & ~subR[25]);
 		dw = tl & subL[25], /* FLinv(kl6) */
-			tr = subR[23] ^ rol32(dw, 1);
+			tr = subR[23] ^ ROL1(dw);
 		SUBKEY_L(26) = tl ^ subL[27]; /* round 19 */
 		SUBKEY_R(26) = tr ^ subR[27];
 		SUBKEY_L(27) = subL[26] ^ subL[28]; /* round 20 */
@@ -561,17 +573,17 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	/* apply the inverse of the last half of P-function */
 	i = 2;
 	do {
-		dw = SUBKEY_L(i + 0) ^ SUBKEY_R(i + 0); dw = rol32(dw, 8);/* round 1 */
+		dw = SUBKEY_L(i + 0) ^ SUBKEY_R(i + 0); dw = ROL8(dw);/* round 1 */
 		SUBKEY_R(i + 0) = SUBKEY_L(i + 0) ^ dw; SUBKEY_L(i + 0) = dw;
-		dw = SUBKEY_L(i + 1) ^ SUBKEY_R(i + 1); dw = rol32(dw, 8);/* round 2 */
+		dw = SUBKEY_L(i + 1) ^ SUBKEY_R(i + 1); dw = ROL8(dw);/* round 2 */
 		SUBKEY_R(i + 1) = SUBKEY_L(i + 1) ^ dw; SUBKEY_L(i + 1) = dw;
-		dw = SUBKEY_L(i + 2) ^ SUBKEY_R(i + 2); dw = rol32(dw, 8);/* round 3 */
+		dw = SUBKEY_L(i + 2) ^ SUBKEY_R(i + 2); dw = ROL8(dw);/* round 3 */
 		SUBKEY_R(i + 2) = SUBKEY_L(i + 2) ^ dw; SUBKEY_L(i + 2) = dw;
-		dw = SUBKEY_L(i + 3) ^ SUBKEY_R(i + 3); dw = rol32(dw, 8);/* round 4 */
+		dw = SUBKEY_L(i + 3) ^ SUBKEY_R(i + 3); dw = ROL8(dw);/* round 4 */
 		SUBKEY_R(i + 3) = SUBKEY_L(i + 3) ^ dw; SUBKEY_L(i + 3) = dw;
-		dw = SUBKEY_L(i + 4) ^ SUBKEY_R(i + 4); dw = rol32(dw, 9);/* round 5 */
+		dw = SUBKEY_L(i + 4) ^ SUBKEY_R(i + 4); dw = ROL8(dw);/* round 5 */
 		SUBKEY_R(i + 4) = SUBKEY_L(i + 4) ^ dw; SUBKEY_L(i + 4) = dw;
-		dw = SUBKEY_L(i + 5) ^ SUBKEY_R(i + 5); dw = rol32(dw, 8);/* round 6 */
+		dw = SUBKEY_L(i + 5) ^ SUBKEY_R(i + 5); dw = ROL8(dw);/* round 6 */
 		SUBKEY_R(i + 5) = SUBKEY_L(i + 5) ^ dw; SUBKEY_L(i + 5) = dw;
 		i += 8;
 	} while (i < max);
@@ -587,10 +599,10 @@ static void camellia_setup128(const unsigned char *key, u32 *subkey)
 	/**
 	 *  k == kll || klr || krl || krr (|| is concatenation)
 	 */
-	kll = get_unaligned_be32(key);
-	klr = get_unaligned_be32(key + 4);
-	krl = get_unaligned_be32(key + 8);
-	krr = get_unaligned_be32(key + 12);
+	GETU32(kll, key     );
+	GETU32(klr, key +  4);
+	GETU32(krl, key +  8);
+	GETU32(krr, key + 12);
 
 	/* generate KL dependent subkeys */
 	/* kw1 */
@@ -695,14 +707,14 @@ static void camellia_setup256(const unsigned char *key, u32 *subkey)
 	 *  key = (kll || klr || krl || krr || krll || krlr || krrl || krrr)
 	 *  (|| is concatenation)
 	 */
-	kll = get_unaligned_be32(key);
-	klr = get_unaligned_be32(key + 4);
-	krl = get_unaligned_be32(key + 8);
-	krr = get_unaligned_be32(key + 12);
-	krll = get_unaligned_be32(key + 16);
-	krlr = get_unaligned_be32(key + 20);
-	krrl = get_unaligned_be32(key + 24);
-	krrr = get_unaligned_be32(key + 28);
+	GETU32(kll,  key     );
+	GETU32(klr,  key +  4);
+	GETU32(krl,  key +  8);
+	GETU32(krr,  key + 12);
+	GETU32(krll, key + 16);
+	GETU32(krlr, key + 20);
+	GETU32(krrl, key + 24);
+	GETU32(krrr, key + 28);
 
 	/* generate KL dependent subkeys */
 	/* kw1 */
@@ -858,13 +870,13 @@ static void camellia_setup192(const unsigned char *key, u32 *subkey)
 	t0 &= ll;							\
 	t2 |= rr;							\
 	rl ^= t2;							\
-	lr ^= rol32(t0, 1);						\
+	lr ^= ROL1(t0);							\
 	t3 = krl;							\
 	t1 = klr;							\
 	t3 &= rl;							\
 	t1 |= lr;							\
 	ll ^= t1;							\
-	rr ^= rol32(t3, 1);						\
+	rr ^= ROL1(t3);							\
     } while(0)
 
 #define CAMELLIA_ROUNDSM(xl, xr, kl, kr, yl, yr, il, ir)		\
@@ -880,7 +892,7 @@ static void camellia_setup192(const unsigned char *key, u32 *subkey)
 	il ^= kl;							\
 	ir ^= il ^ kr;							\
 	yl ^= ir;							\
-	yr ^= ror32(il, 8) ^ ir;						\
+	yr ^= ROR8(il) ^ ir;						\
     } while(0)
 
 /* max = 24: 128bit encrypt, max = 32: 256bit encrypt */

drivers/acpi/dispatcher/dsobject.c

@@ -496,7 +496,7 @@ acpi_ds_build_internal_package_obj(struct acpi_walk_state *walk_state,
 			arg = arg->common.next;
 		}
 
-		ACPI_ERROR((AE_INFO,
+		ACPI_WARNING((AE_INFO,
 			    "Package List length (%X) larger than NumElements count (%X), truncated\n",
 			    i, element_count));
 	} else if (i < element_count) {

drivers/acpi/processor_perflib.c

@@ -71,7 +71,7 @@ static DEFINE_MUTEX(performance_mutex);
  *  1 -> ignore _PPC totally -> forced by user through boot param
  */
 static int ignore_ppc = -1;
-module_param(ignore_ppc, uint, 0644);
+module_param(ignore_ppc, int, 0644);
 MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \
 		 "limited by BIOS, this should help");
 

drivers/acpi/sbshc.c

@@ -107,6 +107,13 @@ static int wait_transaction_complete(struct acpi_smb_hc *hc, int timeout)
 	if (wait_event_timeout(hc->wait, smb_check_done(hc),
 			       msecs_to_jiffies(timeout)))
 		return 0;
+	/*
+	 * After the timeout happens, OS will try to check the status of SMbus.
+	 * If the status is what OS expected, it will be regarded as the bogus
+	 * timeout.
+	 */
+	if (smb_check_done(hc))
+		return 0;
 	else
 		return -ETIME;
 }

drivers/acpi/tables.c

@@ -300,6 +300,8 @@ int __init acpi_table_init(void)
 
 static int __init acpi_parse_apic_instance(char *str)
 {
+	if (!str)
+		return -EINVAL;
 
 	acpi_apic_instance = simple_strtoul(str, NULL, 0);
 

drivers/ata/Kconfig

@@ -448,8 +448,10 @@ config PATA_MARVELL
 	tristate "Marvell PATA support via legacy mode"
 	depends on PCI
 	help
-	  This option enables limited support for the Marvell 88SE6145 ATA
-	  controller.
+	  This option enables limited support for the Marvell 88SE61xx ATA
+	  controllers. If you wish to use only the SATA ports then select
+	  the AHCI driver alone. If you wish to the use the PATA port or
+	  both SATA and PATA include this driver.
 
 	  If unsure, say N.
 

drivers/ata/ahci.c

@@ -420,7 +420,7 @@ static const struct ata_port_info ahci_port_info[] = {
 	/* board_ahci_mv */
 	{
 		AHCI_HFLAGS	(AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI |
-				 AHCI_HFLAG_MV_PATA),
+				 AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP),
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
 		.pio_mask	= 0x1f, /* pio0-4 */
@@ -487,7 +487,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
 	{ PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
 	{ PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
+	{ PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */
 	{ PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
+	{ PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */
 
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
 	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
@@ -610,6 +612,15 @@ module_param(ahci_em_messages, int, 0444);
 MODULE_PARM_DESC(ahci_em_messages,
 	"Set AHCI Enclosure Management Message type (0 = disabled, 1 = LED");
 
+#if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE)
+static int marvell_enable;
+#else
+static int marvell_enable = 1;
+#endif
+module_param(marvell_enable, int, 0644);
+MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)");
+
+
 static inline int ahci_nr_ports(u32 cap)
 {
 	return (cap & 0x1f) + 1;
@@ -732,6 +743,8 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
 			   "MV_AHCI HACK: port_map %x -> %x\n",
 			   port_map,
 			   port_map & mv);
+		dev_printk(KERN_ERR, &pdev->dev,
+			  "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n");
 
 		port_map &= mv;
 	}
@@ -2533,6 +2546,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	/* The AHCI driver can only drive the SATA ports, the PATA driver
+	   can drive them all so if both drivers are selected make sure
+	   AHCI stays out of the way */
+	if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable)
+		return -ENODEV;
+
 	/* acquire resources */
 	rc = pcim_enable_device(pdev);
 	if (rc)

drivers/ata/libata-sff.c

@@ -1315,11 +1315,6 @@ fsm_start:
 		break;
 
 	case HSM_ST_ERR:
-		/* make sure qc->err_mask is available to
-		 * know what's wrong and recover
-		 */
-		WARN_ON(!(qc->err_mask & (AC_ERR_DEV | AC_ERR_HSM)));
-
 		ap->hsm_task_state = HSM_ST_IDLE;
 
 		/* complete taskfile transaction */

drivers/ata/pata_marvell.c

@@ -20,29 +20,30 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_marvell"
-#define DRV_VERSION	"0.1.4"
+#define DRV_VERSION	"0.1.6"
 
 /**
- *	marvell_pre_reset	-	check for 40/80 pin
- *	@link: link
- *	@deadline: deadline jiffies for the operation
+ *	marvell_pata_active	-	check if PATA is active
+ *	@pdev: PCI device
  *
- *	Perform the PATA port setup we need.
+ *	Returns 1 if the PATA port may be active. We know how to check this
+ *	for the 6145 but not the other devices
  */
 
-static int marvell_pre_reset(struct ata_link *link, unsigned long deadline)
+static int marvell_pata_active(struct pci_dev *pdev)
 {
-	struct ata_port *ap = link->ap;
-	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	int i;
 	u32 devices;
 	void __iomem *barp;
-	int i;
 
-	/* Check if our port is enabled */
+	/* We don't yet know how to do this for other devices */
+	if (pdev->device != 0x6145)
+		return 1;	
 
 	barp = pci_iomap(pdev, 5, 0x10);
 	if (barp == NULL)
 		return -ENOMEM;
+
 	printk("BAR5:");
 	for(i = 0; i <= 0x0F; i++)
 		printk("%02X:%02X ", i, ioread8(barp + i));
@@ -51,9 +52,27 @@ static int marvell_pre_reset(struct ata_link *link, unsigned long deadline)
 	devices = ioread32(barp + 0x0C);
 	pci_iounmap(pdev, barp);
 
-	if ((pdev->device == 0x6145) && (ap->port_no == 0) &&
-	    (!(devices & 0x10)))	/* PATA enable ? */
-		return -ENOENT;
+	if (devices & 0x10)
+		return 1;
+	return 0;
+}
+
+/**
+ *	marvell_pre_reset	-	check for 40/80 pin
+ *	@link: link
+ *	@deadline: deadline jiffies for the operation
+ *
+ *	Perform the PATA port setup we need.
+ */
+
+static int marvell_pre_reset(struct ata_link *link, unsigned long deadline)
+{
+	struct ata_port *ap = link->ap;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+	if (pdev->device == 0x6145 && ap->port_no == 0 &&
+		!marvell_pata_active(pdev))	/* PATA enable ? */
+			return -ENOENT;
 
 	return ata_sff_prereset(link, deadline);
 }
@@ -128,6 +147,12 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i
 	if (pdev->device == 0x6101)
 		ppi[1] = &ata_dummy_port_info;
 
+#if defined(CONFIG_AHCI) || defined(CONFIG_AHCI_MODULE)
+	if (!marvell_pata_active(pdev)) {
+		printk(KERN_INFO DRV_NAME ": PATA port not active, deferring to AHCI driver.\n");
+		return -ENODEV;
+	}
+#endif
 	return ata_pci_sff_init_one(pdev, ppi, &marvell_sht, NULL);
 }
 

drivers/ata/pata_sil680.c

@@ -322,9 +322,6 @@ static int __devinit sil680_init_one(struct pci_dev *pdev,
 	/* Try to acquire MMIO resources and fallback to PIO if
 	 * that fails
 	 */
-	rc = pcim_enable_device(pdev);
-	if (rc)
-		return rc;
 	rc = pcim_iomap_regions(pdev, 1 << SIL680_MMIO_BAR, DRV_NAME);
 	if (rc)
 		goto use_ioports;

drivers/ata/sata_mv.c

@@ -667,7 +667,8 @@ static const struct pci_device_id mv_pci_tbl[] = {
 	{ PCI_VDEVICE(MARVELL, 0x5041), chip_504x },
 	{ PCI_VDEVICE(MARVELL, 0x5080), chip_5080 },
 	{ PCI_VDEVICE(MARVELL, 0x5081), chip_508x },
-	/* RocketRAID 1740/174x have different identifiers */
+	/* RocketRAID 1720/174x have different identifiers */
+	{ PCI_VDEVICE(TTI, 0x1720), chip_6042 },
 	{ PCI_VDEVICE(TTI, 0x1740), chip_508x },
 	{ PCI_VDEVICE(TTI, 0x1742), chip_508x },
 

drivers/ata/sata_nv.c

@@ -309,8 +309,6 @@ static void nv_nf2_freeze(struct ata_port *ap);
 static void nv_nf2_thaw(struct ata_port *ap);
 static void nv_ck804_freeze(struct ata_port *ap);
 static void nv_ck804_thaw(struct ata_port *ap);
-static int nv_hardreset(struct ata_link *link, unsigned int *class,
-			unsigned long deadline);
 static int nv_adma_slave_config(struct scsi_device *sdev);
 static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc);
 static void nv_adma_qc_prep(struct ata_queued_cmd *qc);
@@ -407,7 +405,7 @@ static struct scsi_host_template nv_swncq_sht = {
 
 static struct ata_port_operations nv_generic_ops = {
 	.inherits		= &ata_bmdma_port_ops,
-	.hardreset		= nv_hardreset,
+	.hardreset		= ATA_OP_NULL,
 	.scr_read		= nv_scr_read,
 	.scr_write		= nv_scr_write,
 };
@@ -1588,21 +1586,6 @@ static void nv_mcp55_thaw(struct ata_port *ap)
 	ata_sff_thaw(ap);
 }
 
-static int nv_hardreset(struct ata_link *link, unsigned int *class,
-			unsigned long deadline)
-{
-	int rc;
-
-	/* SATA hardreset fails to retrieve proper device signature on
-	 * some controllers.  Request follow up SRST.  For more info,
-	 * see http://bugzilla.kernel.org/show_bug.cgi?id=3352
-	 */
-	rc = sata_sff_hardreset(link, class, deadline);
-	if (rc)
-		return rc;
-	return -EAGAIN;
-}
-
 static void nv_adma_error_handler(struct ata_port *ap)
 {
 	struct nv_adma_port_priv *pp = ap->private_data;

drivers/clocksource/acpi_pm.c

@@ -21,6 +21,7 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/pci.h>
+#include <linux/delay.h>
 #include <asm/io.h>
 
 /*
@@ -151,13 +152,13 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_LE,
  */
 static int verify_pmtmr_rate(void)
 {
-	u32 value1, value2;
+	cycle_t value1, value2;
 	unsigned long count, delta;
 
 	mach_prepare_counter();
-	value1 = read_pmtmr();
+	value1 = clocksource_acpi_pm.read();
 	mach_countup(&count);
-	value2 = read_pmtmr();
+	value2 = clocksource_acpi_pm.read();
 	delta = (value2 - value1) & ACPI_PM_MASK;
 
 	/* Check that the PMTMR delta is within 5% of what we expect */
@@ -175,10 +176,13 @@ static int verify_pmtmr_rate(void)
 #define verify_pmtmr_rate() (0)
 #endif
 
+/* Number of monotonicity checks to perform during initialization */
+#define ACPI_PM_MONOTONICITY_CHECKS 10
+
 static int __init init_acpi_pm_clocksource(void)
 {
-	u32 value1, value2;
-	unsigned int i;
+	cycle_t value1, value2;
+	unsigned int i, j, good = 0;
 
 	if (!pmtmr_ioport)
 		return -ENODEV;
@@ -187,24 +191,32 @@ static int __init init_acpi_pm_clocksource(void)
 						clocksource_acpi_pm.shift);
 
 	/* "verify" this timing source: */
-	value1 = read_pmtmr();
-	for (i = 0; i < 10000; i++) {
-		value2 = read_pmtmr();
-		if (value2 == value1)
-			continue;
-		if (value2 > value1)
-			goto pm_good;
-		if ((value2 < value1) && ((value2) < 0xFFF))
-			goto pm_good;
-		printk(KERN_INFO "PM-Timer had inconsistent results:"
-			" 0x%#x, 0x%#x - aborting.\n", value1, value2);
-		return -EINVAL;
+	for (j = 0; j < ACPI_PM_MONOTONICITY_CHECKS; j++) {
+		value1 = clocksource_acpi_pm.read();
+		for (i = 0; i < 10000; i++) {
+			value2 = clocksource_acpi_pm.read();
+			if (value2 == value1)
+				continue;
+			if (value2 > value1)
+				good++;
+				break;
+			if ((value2 < value1) && ((value2) < 0xFFF))
+				good++;
+				break;
+			printk(KERN_INFO "PM-Timer had inconsistent results:"
+			       " 0x%#llx, 0x%#llx - aborting.\n",
+			       value1, value2);
+			return -EINVAL;
+		}
+		udelay(300 * i);
+	}
+
+	if (good != ACPI_PM_MONOTONICITY_CHECKS) {
+		printk(KERN_INFO "PM-Timer failed consistency check "
+		       " (0x%#llx) - aborting.\n", value1);
+		return -ENODEV;
 	}
-	printk(KERN_INFO "PM-Timer had no reasonable result:"
-			" 0x%#x - aborting.\n", value1);
-	return -ENODEV;
 
-pm_good:
 	if (verify_pmtmr_rate() != 0)
 		return -ENODEV;
 

drivers/i2c/busses/i2c-sh_mobile.c

@@ -31,13 +31,84 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
+/* Transmit operation:                                                      */
+/*                                                                          */
+/* 0 byte transmit                                                          */
+/* BUS:     S     A8     ACK   P                                            */
+/* IRQ:       DTE   WAIT                                                    */
+/* ICIC:                                                                    */
+/* ICCR: 0x94 0x90                                                          */
+/* ICDR:      A8                                                            */
+/*                                                                          */
+/* 1 byte transmit                                                          */
+/* BUS:     S     A8     ACK   D8(1)   ACK   P                              */
+/* IRQ:       DTE   WAIT         WAIT                                       */
+/* ICIC:      -DTE                                                          */
+/* ICCR: 0x94       0x90                                                    */
+/* ICDR:      A8    D8(1)                                                   */
+/*                                                                          */
+/* 2 byte transmit                                                          */
+/* BUS:     S     A8     ACK   D8(1)   ACK   D8(2)   ACK   P                */
+/* IRQ:       DTE   WAIT         WAIT          WAIT                         */
+/* ICIC:      -DTE                                                          */
+/* ICCR: 0x94                    0x90                                       */
+/* ICDR:      A8    D8(1)        D8(2)                                      */
+/*                                                                          */
+/* 3 bytes or more, +---------+ gets repeated                               */
+/*                                                                          */
+/*                                                                          */
+/* Receive operation:                                                       */
+/*                                                                          */
+/* 0 byte receive - not supported since slave may hold SDA low              */
+/*                                                                          */
+/* 1 byte receive       [TX] | [RX]                                         */
+/* BUS:     S     A8     ACK | D8(1)   ACK   P                              */
+/* IRQ:       DTE   WAIT     |   WAIT     DTE                               */
+/* ICIC:      -DTE           |   +DTE                                       */
+/* ICCR: 0x94       0x81     |   0xc0                                       */
+/* ICDR:      A8             |            D8(1)                             */
+/*                                                                          */
+/* 2 byte receive        [TX]| [RX]                                         */
+/* BUS:     S     A8     ACK | D8(1)   ACK   D8(2)   ACK   P                */
+/* IRQ:       DTE   WAIT     |   WAIT          WAIT     DTE                 */
+/* ICIC:      -DTE           |                 +DTE                         */
+/* ICCR: 0x94       0x81     |                 0xc0                         */
+/* ICDR:      A8             |                 D8(1)    D8(2)               */
+/*                                                                          */
+/* 3 byte receive       [TX] | [RX]                                         */
+/* BUS:     S     A8     ACK | D8(1)   ACK   D8(2)   ACK   D8(3)   ACK    P */
+/* IRQ:       DTE   WAIT     |   WAIT          WAIT         WAIT      DTE   */
+/* ICIC:      -DTE           |                              +DTE            */
+/* ICCR: 0x94       0x81     |                              0xc0            */
+/* ICDR:      A8             |                 D8(1)        D8(2)     D8(3) */
+/*                                                                          */
+/* 4 bytes or more, this part is repeated    +---------+                    */
+/*                                                                          */
+/*                                                                          */
+/* Interrupt order and BUSY flag                                            */
+/*     ___                                                 _                */
+/* SDA ___\___XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXAAAAAAAAA___/                 */
+/* SCL      \_/1\_/2\_/3\_/4\_/5\_/6\_/7\_/8\___/9\_____/                   */
+/*                                                                          */
+/*        S   D7  D6  D5  D4  D3  D2  D1  D0              P                 */
+/*                                           ___                            */
+/* WAIT IRQ ________________________________/   \___________                */
+/* TACK IRQ ____________________________________/   \_______                */
+/* DTE  IRQ __________________________________________/   \_                */
+/* AL   IRQ XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX                */
+/*         _______________________________________________                  */
+/* BUSY __/                                               \_                */
+/*                                                                          */
+
 enum sh_mobile_i2c_op {
 	OP_START = 0,
-	OP_TX_ONLY,
+	OP_TX_FIRST,
+	OP_TX,
 	OP_TX_STOP,
 	OP_TX_TO_RX,
-	OP_RX_ONLY,
+	OP_RX,
 	OP_RX_STOP,
+	OP_RX_STOP_DATA,
 };
 
 struct sh_mobile_i2c_data {
@@ -127,25 +198,34 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd,
 	spin_lock_irqsave(&pd->lock, flags);
 
 	switch (op) {
-	case OP_START:
+	case OP_START: /* issue start and trigger DTE interrupt */
 		iowrite8(0x94, ICCR(pd));
 		break;
-	case OP_TX_ONLY:
+	case OP_TX_FIRST: /* disable DTE interrupt and write data */
+		iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE, ICIC(pd));
 		iowrite8(data, ICDR(pd));
 		break;
-	case OP_TX_STOP:
+	case OP_TX: /* write data */
 		iowrite8(data, ICDR(pd));
-		iowrite8(0x90, ICCR(pd));
-		iowrite8(ICIC_ALE | ICIC_TACKE, ICIC(pd));
 		break;
-	case OP_TX_TO_RX:
+	case OP_TX_STOP: /* write data and issue a stop afterwards */
 		iowrite8(data, ICDR(pd));
+		iowrite8(0x90, ICCR(pd));
+		break;
+	case OP_TX_TO_RX: /* select read mode */
 		iowrite8(0x81, ICCR(pd));
 		break;
-	case OP_RX_ONLY:
+	case OP_RX: /* just read data */
 		ret = ioread8(ICDR(pd));
 		break;
-	case OP_RX_STOP:
+	case OP_RX_STOP: /* enable DTE interrupt, issue stop */
+		iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE,
+			 ICIC(pd));
+		iowrite8(0xc0, ICCR(pd));
+		break;
+	case OP_RX_STOP_DATA: /* enable DTE interrupt, read data, issue stop */
+		iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE,
+			 ICIC(pd));
 		ret = ioread8(ICDR(pd));
 		iowrite8(0xc0, ICCR(pd));
 		break;
@@ -157,58 +237,120 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd,
 	return ret;
 }
 
+static int sh_mobile_i2c_is_first_byte(struct sh_mobile_i2c_data *pd)
+{
+	if (pd->pos == -1)
+		return 1;
+
+	return 0;
+}
+
+static int sh_mobile_i2c_is_last_byte(struct sh_mobile_i2c_data *pd)
+{
+	if (pd->pos == (pd->msg->len - 1))
+		return 1;
+
+	return 0;
+}
+
+static void sh_mobile_i2c_get_data(struct sh_mobile_i2c_data *pd,
+				   unsigned char *buf)
+{
+	switch (pd->pos) {
+	case -1:
+		*buf = (pd->msg->addr & 0x7f) << 1;
+		*buf |= (pd->msg->flags & I2C_M_RD) ? 1 : 0;
+		break;
+	default:
+		*buf = pd->msg->buf[pd->pos];
+	}
+}
+
+static int sh_mobile_i2c_isr_tx(struct sh_mobile_i2c_data *pd)
+{
+	unsigned char data;
+
+	if (pd->pos == pd->msg->len)
+		return 1;
+
+	sh_mobile_i2c_get_data(pd, &data);
+
+	if (sh_mobile_i2c_is_last_byte(pd))
+		i2c_op(pd, OP_TX_STOP, data);
+	else if (sh_mobile_i2c_is_first_byte(pd))
+		i2c_op(pd, OP_TX_FIRST, data);
+	else
+		i2c_op(pd, OP_TX, data);
+
+	pd->pos++;
+	return 0;
+}
+
+static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd)
+{
+	unsigned char data;
+	int real_pos;
+
+	do {
+		if (pd->pos <= -1) {
+			sh_mobile_i2c_get_data(pd, &data);
+
+			if (sh_mobile_i2c_is_first_byte(pd))
+				i2c_op(pd, OP_TX_FIRST, data);
+			else
+				i2c_op(pd, OP_TX, data);
+			break;
+		}
+
+		if (pd->pos == 0) {
+			i2c_op(pd, OP_TX_TO_RX, 0);
+			break;
+		}
+
+		real_pos = pd->pos - 2;
+
+		if (pd->pos == pd->msg->len) {
+			if (real_pos < 0) {
+				i2c_op(pd, OP_RX_STOP, 0);
+				break;
+			}
+			data = i2c_op(pd, OP_RX_STOP_DATA, 0);
+		} else
+			data = i2c_op(pd, OP_RX, 0);
+
+		pd->msg->buf[real_pos] = data;
+	} while (0);
+
+	pd->pos++;
+	return pd->pos == (pd->msg->len + 2);
+}
+
 static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
 {
 	struct platform_device *dev = dev_id;
 	struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev);
-	struct i2c_msg *msg = pd->msg;
-	unsigned char data, sr;
-	int wakeup = 0;
+	unsigned char sr;
+	int wakeup;
 
 	sr = ioread8(ICSR(pd));
-	pd->sr |= sr;
+	pd->sr |= sr; /* remember state */
 
 	dev_dbg(pd->dev, "i2c_isr 0x%02x 0x%02x %s %d %d!\n", sr, pd->sr,
-	       (msg->flags & I2C_M_RD) ? "read" : "write",
-	       pd->pos, msg->len);
+	       (pd->msg->flags & I2C_M_RD) ? "read" : "write",
+	       pd->pos, pd->msg->len);
 
 	if (sr & (ICSR_AL | ICSR_TACK)) {
-		iowrite8(0, ICIC(pd)); /* disable interrupts */
-		wakeup = 1;
-		goto do_wakeup;
-	}
+		/* don't interrupt transaction - continue to issue stop */
+		iowrite8(sr & ~(ICSR_AL | ICSR_TACK), ICSR(pd));
+		wakeup = 0;
+	} else if (pd->msg->flags & I2C_M_RD)
+		wakeup = sh_mobile_i2c_isr_rx(pd);
+	else
+		wakeup = sh_mobile_i2c_isr_tx(pd);
 
-	if (pd->pos == msg->len) {
-		i2c_op(pd, OP_RX_ONLY, 0);
-		wakeup = 1;
-		goto do_wakeup;
-	}
+	if (sr & ICSR_WAIT) /* TODO: add delay here to support slow acks */
+		iowrite8(sr & ~ICSR_WAIT, ICSR(pd));
 
-	if (pd->pos == -1) {
-		data = (msg->addr & 0x7f) << 1;
-		data |= (msg->flags & I2C_M_RD) ? 1 : 0;
-	} else
-		data = msg->buf[pd->pos];
-
-	if ((pd->pos == -1) || !(msg->flags & I2C_M_RD)) {
-		if (msg->flags & I2C_M_RD)
-			i2c_op(pd, OP_TX_TO_RX, data);
-		else if (pd->pos == (msg->len - 1)) {
-			i2c_op(pd, OP_TX_STOP, data);
-			wakeup = 1;
-		} else
-			i2c_op(pd, OP_TX_ONLY, data);
-	} else {
-		if (pd->pos == (msg->len - 1))
-			data = i2c_op(pd, OP_RX_STOP, 0);
-		else
-			data = i2c_op(pd, OP_RX_ONLY, 0);
-
-		msg->buf[pd->pos] = data;
-	}
-	pd->pos++;
-
- do_wakeup:
 	if (wakeup) {
 		pd->sr |= SW_DONE;
 		wake_up(&pd->wait);
@@ -219,6 +361,11 @@ static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
 
 static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg)
 {
+	if (usr_msg->len == 0 && (usr_msg->flags & I2C_M_RD)) {
+		dev_err(pd->dev, "Unsupported zero length i2c read\n");
+		return -EIO;
+	}
+
 	/* Initialize channel registers */
 	iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd));
 
@@ -233,9 +380,8 @@ static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg)
 	pd->pos = -1;
 	pd->sr = 0;
 
-	/* Enable all interrupts except wait */
-	iowrite8(ioread8(ICIC(pd)) | ICIC_ALE | ICIC_TACKE | ICIC_DTEE,
-		 ICIC(pd));
+	/* Enable all interrupts to begin with */
+	iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE | ICIC_DTEE, ICIC(pd));
 	return 0;
 }
 
@@ -268,25 +414,18 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter,
 		if (!k)
 			dev_err(pd->dev, "Transfer request timed out\n");
 
-		retry_count = 10;
+		retry_count = 1000;
 again:
 		val = ioread8(ICSR(pd));
 
 		dev_dbg(pd->dev, "val 0x%02x pd->sr 0x%02x\n", val, pd->sr);
 
-		if ((val | pd->sr) & (ICSR_TACK | ICSR_AL)) {
-			err = -EIO;
-			break;
-		}
-
 		/* the interrupt handler may wake us up before the
 		 * transfer is finished, so poll the hardware
 		 * until we're done.
 		 */
-
-		if (!(!(val & ICSR_BUSY) && (val & ICSR_SCLM) &&
-		      (val & ICSR_SDAM))) {
-			msleep(1);
+		if (val & ICSR_BUSY) {
+			udelay(10);
 			if (retry_count--)
 				goto again;
 
@@ -294,6 +433,12 @@ again:
 			dev_err(pd->dev, "Polling timed out\n");
 			break;
 		}
+
+		/* handle missing acknowledge and arbitration lost */
+		if ((val | pd->sr) & (ICSR_TACK | ICSR_AL)) {
+			err = -EIO;
+			break;
+		}
 	}
 
 	deactivate_ch(pd);

drivers/input/mouse/bcm5974.c

@@ -63,7 +63,7 @@
 }
 
 /* table of devices that work with this driver */
-static const struct usb_device_id bcm5974_table [] = {
+static const struct usb_device_id bcm5974_table[] = {
 	/* MacbookAir1.1 */
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_ANSI),
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_ISO),
@@ -105,7 +105,7 @@ struct tp_header {
 
 /* trackpad finger structure */
 struct tp_finger {
-	__le16 origin;		/* left/right origin? */
+	__le16 origin;		/* zero when switching track finger */
 	__le16 abs_x;		/* absolute x coodinate */
 	__le16 abs_y;		/* absolute y coodinate */
 	__le16 rel_x;		/* relative x coodinate */
@@ -159,6 +159,7 @@ struct bcm5974 {
 	struct bt_data *bt_data;	/* button transferred data */
 	struct urb *tp_urb;		/* trackpad usb request block */
 	struct tp_data *tp_data;	/* trackpad transferred data */
+	int fingers;			/* number of fingers on trackpad */
 };
 
 /* logical dimensions */
@@ -172,6 +173,10 @@ struct bcm5974 {
 #define SN_WIDTH	100		/* width signal-to-noise ratio */
 #define SN_COORD	250		/* coordinate signal-to-noise ratio */
 
+/* pressure thresholds */
+#define PRESSURE_LOW	(2 * DIM_PRESSURE / SN_PRESSURE)
+#define PRESSURE_HIGH	(3 * PRESSURE_LOW)
+
 /* device constants */
 static const struct bcm5974_config bcm5974_config_table[] = {
 	{
@@ -248,6 +253,7 @@ static void setup_events_to_report(struct input_dev *input_dev,
 				0, cfg->y.dim, cfg->y.fuzz, 0);
 
 	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
 	__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
 	__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
 	__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
@@ -273,32 +279,66 @@ static int report_tp_state(struct bcm5974 *dev, int size)
 	const struct tp_finger *f = dev->tp_data->finger;
 	struct input_dev *input = dev->input;
 	const int fingers = (size - 26) / 28;
-	int p = 0, w, x, y, n = 0;
+	int raw_p, raw_w, raw_x, raw_y;
+	int ptest = 0, origin = 0, nmin = 0, nmax = 0;
+	int abs_p = 0, abs_w = 0, abs_x = 0, abs_y = 0;
 
 	if (size < 26 || (size - 26) % 28 != 0)
 		return -EIO;
 
+	/* always track the first finger; when detached, start over */
 	if (fingers) {
-		p = raw2int(f->force_major);
-		w = raw2int(f->size_major);
-		x = raw2int(f->abs_x);
-		y = raw2int(f->abs_y);
-		n = p > 0 ? fingers : 0;
+		raw_p = raw2int(f->force_major);
+		raw_w = raw2int(f->size_major);
+		raw_x = raw2int(f->abs_x);
+		raw_y = raw2int(f->abs_y);
 
 		dprintk(9,
-			"bcm5974: p: %+05d w: %+05d x: %+05d y: %+05d n: %d\n",
-			p, w, x, y, n);
+			"bcm5974: raw: p: %+05d w: %+05d x: %+05d y: %+05d\n",
+			raw_p, raw_w, raw_x, raw_y);
+
+		ptest = int2bound(&c->p, raw_p);
+		origin = raw2int(f->origin);
+	}
 
-		input_report_abs(input, ABS_TOOL_WIDTH, int2bound(&c->w, w));
-		input_report_abs(input, ABS_X, int2bound(&c->x, x - c->x.devmin));
-		input_report_abs(input, ABS_Y, int2bound(&c->y, c->y.devmax - y));
+	/* while tracking finger still valid, count all fingers */
+	if (ptest > PRESSURE_LOW && origin) {
+		abs_p = ptest;
+		abs_w = int2bound(&c->w, raw_w);
+		abs_x = int2bound(&c->x, raw_x - c->x.devmin);
+		abs_y = int2bound(&c->y, c->y.devmax - raw_y);
+		for (; f != dev->tp_data->finger + fingers; f++) {
+			ptest = int2bound(&c->p, raw2int(f->force_major));
+			if (ptest > PRESSURE_LOW)
+				nmax++;
+			if (ptest > PRESSURE_HIGH)
+				nmin++;
+		}
 	}
 
-	input_report_abs(input, ABS_PRESSURE, int2bound(&c->p, p));
+	if (dev->fingers < nmin)
+		dev->fingers = nmin;
+	if (dev->fingers > nmax)
+		dev->fingers = nmax;
+
+	input_report_key(input, BTN_TOUCH, dev->fingers > 0);
+	input_report_key(input, BTN_TOOL_FINGER, dev->fingers == 1);
+	input_report_key(input, BTN_TOOL_DOUBLETAP, dev->fingers == 2);
+	input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers > 2);
 
-	input_report_key(input, BTN_TOOL_FINGER, n == 1);
-	input_report_key(input, BTN_TOOL_DOUBLETAP, n == 2);
-	input_report_key(input, BTN_TOOL_TRIPLETAP, n > 2);
+	input_report_abs(input, ABS_PRESSURE, abs_p);
+	input_report_abs(input, ABS_TOOL_WIDTH, abs_w);
+
+	if (abs_p) {
+		input_report_abs(input, ABS_X, abs_x);
+		input_report_abs(input, ABS_Y, abs_y);
+
+		dprintk(8,
+			"bcm5974: abs: p: %+05d w: %+05d x: %+05d y: %+05d "
+			"nmin: %d nmax: %d n: %d\n",
+			abs_p, abs_w, abs_x, abs_y, nmin, nmax, dev->fingers);
+
+	}
 
 	input_sync(input);
 

drivers/input/serio/i8042-x86ia64io.h

@@ -305,7 +305,7 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
 		.ident = "Lenovo 3000 n100",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "076804U"),
 		},
 	},
 	{

drivers/media/common/saa7146_video.c

@@ -1068,7 +1068,7 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int
 	{
 		v4l2_std_id *id = arg;
 		int found = 0;
-		int i, err;
+		int i;
 
 		DEB_EE(("VIDIOC_S_STD\n"));
 
@@ -1116,7 +1116,6 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int
 	case VIDIOC_OVERLAY:
 	{
 		int on = *(int *)arg;
-		int err = 0;
 
 		DEB_D(("VIDIOC_OVERLAY on:%d\n",on));
 		if (on != 0) {
@@ -1192,7 +1191,6 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int
 	case VIDIOCGMBUF:
 	{
 		struct video_mbuf *mbuf = arg;
-		struct videobuf_queue *q;
 		int i;
 
 		/* fixme: number of capture buffers and sizes for v4l apps */

drivers/media/common/tuners/mt2131.c

@@ -1,7 +1,7 @@
 /*
  *  Driver for Microtune MT2131 "QAM/8VSB single chip tuner"
  *
- *  Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by

drivers/media/common/tuners/mt2131.h

@@ -1,7 +1,7 @@
 /*
  *  Driver for Microtune MT2131 "QAM/8VSB single chip tuner"
  *
- *  Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by

drivers/media/common/tuners/mt2131_priv.h

@@ -1,7 +1,7 @@
 /*
  *  Driver for Microtune MT2131 "QAM/8VSB single chip tuner"
  *
- *  Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by

drivers/media/common/tuners/mxl5005s.c

@@ -2,7 +2,7 @@
     MaxLinear MXL5005S VSB/QAM/DVBT tuner driver
 
     Copyright (C) 2008 MaxLinear
-    Copyright (C) 2006 Steven Toth <stoth@hauppauge.com>
+    Copyright (C) 2006 Steven Toth <stoth@linuxtv.org>
       Functions:
 	mxl5005s_reset()
 	mxl5005s_writereg()
@@ -3837,7 +3837,7 @@ static u16 MXL_Hystersis_Test(struct dvb_frontend *fe, int Hystersis)
 /* ----------------------------------------------------------------
  * Begin: Everything after here is new code to adapt the
  * proprietary Realtek driver into a Linux API tuner.
- * Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
  */
 static int mxl5005s_reset(struct dvb_frontend *fe)
 {

drivers/media/common/tuners/mxl5005s.h

@@ -2,7 +2,7 @@
     MaxLinear MXL5005S VSB/QAM/DVBT tuner driver
 
     Copyright (C) 2008 MaxLinear
-    Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+    Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by

drivers/media/common/tuners/tuner-simple.c

@@ -253,7 +253,7 @@ static struct tuner_params *simple_tuner_params(struct dvb_frontend *fe,
 
 static int simple_config_lookup(struct dvb_frontend *fe,
 				struct tuner_params *t_params,
-				int *frequency, u8 *config, u8 *cb)
+				unsigned *frequency, u8 *config, u8 *cb)
 {
 	struct tuner_simple_priv *priv = fe->tuner_priv;
 	int i;
@@ -587,45 +587,45 @@ static int simple_set_tv_freq(struct dvb_frontend *fe,
 	priv->last_div = div;
 	if (t_params->has_tda9887) {
 		struct v4l2_priv_tun_config tda9887_cfg;
-		int config = 0;
+		int tda_config = 0;
 		int is_secam_l = (params->std & (V4L2_STD_SECAM_L |
 						 V4L2_STD_SECAM_LC)) &&
 			!(params->std & ~(V4L2_STD_SECAM_L |
 					  V4L2_STD_SECAM_LC));
 
 		tda9887_cfg.tuner = TUNER_TDA9887;
-		tda9887_cfg.priv  = &config;
+		tda9887_cfg.priv  = &tda_config;
 
 		if (params->std == V4L2_STD_SECAM_LC) {
 			if (t_params->port1_active ^ t_params->port1_invert_for_secam_lc)
-				config |= TDA9887_PORT1_ACTIVE;
+				tda_config |= TDA9887_PORT1_ACTIVE;
 			if (t_params->port2_active ^ t_params->port2_invert_for_secam_lc)
-				config |= TDA9887_PORT2_ACTIVE;
+				tda_config |= TDA9887_PORT2_ACTIVE;
 		} else {
 			if (t_params->port1_active)
-				config |= TDA9887_PORT1_ACTIVE;
+				tda_config |= TDA9887_PORT1_ACTIVE;
 			if (t_params->port2_active)
-				config |= TDA9887_PORT2_ACTIVE;
+				tda_config |= TDA9887_PORT2_ACTIVE;
 		}
 		if (t_params->intercarrier_mode)
-			config |= TDA9887_INTERCARRIER;
+			tda_config |= TDA9887_INTERCARRIER;
 		if (is_secam_l) {
 			if (i == 0 && t_params->default_top_secam_low)
-				config |= TDA9887_TOP(t_params->default_top_secam_low);
+				tda_config |= TDA9887_TOP(t_params->default_top_secam_low);
 			else if (i == 1 && t_params->default_top_secam_mid)
-				config |= TDA9887_TOP(t_params->default_top_secam_mid);
+				tda_config |= TDA9887_TOP(t_params->default_top_secam_mid);
 			else if (t_params->default_top_secam_high)
-				config |= TDA9887_TOP(t_params->default_top_secam_high);
+				tda_config |= TDA9887_TOP(t_params->default_top_secam_high);
 		} else {
 			if (i == 0 && t_params->default_top_low)
-				config |= TDA9887_TOP(t_params->default_top_low);
+				tda_config |= TDA9887_TOP(t_params->default_top_low);
 			else if (i == 1 && t_params->default_top_mid)
-				config |= TDA9887_TOP(t_params->default_top_mid);
+				tda_config |= TDA9887_TOP(t_params->default_top_mid);
 			else if (t_params->default_top_high)
-				config |= TDA9887_TOP(t_params->default_top_high);
+				tda_config |= TDA9887_TOP(t_params->default_top_high);
 		}
 		if (t_params->default_pll_gating_18)
-			config |= TDA9887_GATING_18;
+			tda_config |= TDA9887_GATING_18;
 		i2c_clients_command(priv->i2c_props.adap, TUNER_SET_CONFIG,
 				    &tda9887_cfg);
 	}
@@ -813,7 +813,8 @@ static u32 simple_dvb_configure(struct dvb_frontend *fe, u8 *buf,
 	static struct tuner_params *t_params;
 	u8 config, cb;
 	u32 div;
-	int ret, frequency = params->frequency / 62500;
+	int ret;
+	unsigned frequency = params->frequency / 62500;
 
 	t_params = simple_tuner_params(fe, TUNER_PARAM_TYPE_DIGITAL);
 	ret = simple_config_lookup(fe, t_params, &frequency, &config, &cb);

drivers/media/common/tuners/xc5000.c

@@ -2,7 +2,7 @@
  *  Driver for Xceive XC5000 "QAM/8VSB single chip tuner"
  *
  *  Copyright (c) 2007 Xceive Corporation
- *  Copyright (c) 2007 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by

drivers/media/common/tuners/xc5000.h

@@ -1,7 +1,7 @@
 /*
  *  Driver for Xceive XC5000 "QAM/8VSB single chip tuner"
  *
- *  Copyright (c) 2007 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by

drivers/media/common/tuners/xc5000_priv.h

@@ -1,7 +1,7 @@
 /*
  *  Driver for Xceive XC5000 "QAM/8VSB single chip tuner"
  *
- *  Copyright (c) 2007 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by

drivers/media/dvb/b2c2/flexcop-fe-tuner.c

@@ -137,7 +137,8 @@ static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, un
 			flexcop_diseqc_send_byte(fe, 0xff);
 		else {
 			flexcop_set_tone(fe, SEC_TONE_ON);
-			udelay(12500);
+			mdelay(12);
+			udelay(500);
 			flexcop_set_tone(fe, SEC_TONE_OFF);
 		}
 		msleep(20);

drivers/media/dvb/b2c2/flexcop-i2c.c

@@ -221,12 +221,12 @@ int flexcop_i2c_init(struct flexcop_device *fc)
 	fc->fc_i2c_adap[1].port = FC_I2C_PORT_EEPROM;
 	fc->fc_i2c_adap[2].port = FC_I2C_PORT_TUNER;
 
-	strncpy(fc->fc_i2c_adap[0].i2c_adap.name,
-		"B2C2 FlexCop I2C to demod", I2C_NAME_SIZE);
-	strncpy(fc->fc_i2c_adap[1].i2c_adap.name,
-		"B2C2 FlexCop I2C to eeprom", I2C_NAME_SIZE);
-	strncpy(fc->fc_i2c_adap[2].i2c_adap.name,
-		"B2C2 FlexCop I2C to tuner", I2C_NAME_SIZE);
+	strlcpy(fc->fc_i2c_adap[0].i2c_adap.name, "B2C2 FlexCop I2C to demod",
+		sizeof(fc->fc_i2c_adap[0].i2c_adap.name));
+	strlcpy(fc->fc_i2c_adap[1].i2c_adap.name, "B2C2 FlexCop I2C to eeprom",
+		sizeof(fc->fc_i2c_adap[1].i2c_adap.name));
+	strlcpy(fc->fc_i2c_adap[2].i2c_adap.name, "B2C2 FlexCop I2C to tuner",
+		sizeof(fc->fc_i2c_adap[2].i2c_adap.name));
 
 	i2c_set_adapdata(&fc->fc_i2c_adap[0].i2c_adap, &fc->fc_i2c_adap[0]);
 	i2c_set_adapdata(&fc->fc_i2c_adap[1].i2c_adap, &fc->fc_i2c_adap[1]);

drivers/media/dvb/bt8xx/dst.c

@@ -1244,7 +1244,7 @@ static int dst_command(struct dst_state *state, u8 *data, u8 len)
 		goto error;
 	}
 	if (state->type_flags & DST_TYPE_HAS_FW_1)
-		udelay(3000);
+		mdelay(3);
 	if (read_dst(state, &reply, GET_ACK)) {
 		dprintk(verbose, DST_DEBUG, 1, "Trying to recover.. ");
 		if ((dst_error_recovery(state)) < 0) {
@@ -1260,7 +1260,7 @@ static int dst_command(struct dst_state *state, u8 *data, u8 len)
 	if (len >= 2 && data[0] == 0 && (data[1] == 1 || data[1] == 3))
 		goto error;
 	if (state->type_flags & DST_TYPE_HAS_FW_1)
-		udelay(3000);
+		mdelay(3);
 	else
 		udelay(2000);
 	if (!dst_wait_dst_ready(state, NO_DELAY))

drivers/media/dvb/dvb-core/dmxdev.c

@@ -641,7 +641,6 @@ static int dvb_dmxdev_filter_start(struct dmxdev_filter *filter)
 		struct timespec timeout = { 0 };
 		struct dmx_pes_filter_params *para = &filter->params.pes;
 		dmx_output_t otype;
-		int ret;
 		int ts_type;
 		enum dmx_ts_pes ts_pes;
 		struct dmx_ts_feed **tsfeed = &filter->feed.ts;

drivers/media/dvb/dvb-core/dvb_ca_en50221.c

@@ -1032,7 +1032,7 @@ static int dvb_ca_en50221_thread(void *data)
 					/* we need this extra check for annoying interfaces like the budget-av */
 					if ((!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) &&
 					    (ca->pub->poll_slot_status)) {
-						int status = ca->pub->poll_slot_status(ca->pub, slot, 0);
+						status = ca->pub->poll_slot_status(ca->pub, slot, 0);
 						if (!(status & DVB_CA_EN50221_POLL_CAM_PRESENT)) {
 							ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE;
 							dvb_ca_en50221_thread_update_delay(ca);
@@ -1089,7 +1089,7 @@ static int dvb_ca_en50221_thread(void *data)
 					/* we need this extra check for annoying interfaces like the budget-av */
 					if ((!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) &&
 					    (ca->pub->poll_slot_status)) {
-						int status = ca->pub->poll_slot_status(ca->pub, slot, 0);
+						status = ca->pub->poll_slot_status(ca->pub, slot, 0);
 						if (!(status & DVB_CA_EN50221_POLL_CAM_PRESENT)) {
 							ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE;
 							dvb_ca_en50221_thread_update_delay(ca);

drivers/media/dvb/dvb-core/dvb_frontend.c

@@ -889,13 +889,13 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file,
 			 * initialization, so parg is 8 bits and does not
 			 * include the initialization or start bit
 			 */
-			unsigned long cmd = ((unsigned long) parg) << 1;
+			unsigned long swcmd = ((unsigned long) parg) << 1;
 			struct timeval nexttime;
 			struct timeval tv[10];
 			int i;
 			u8 last = 1;
 			if (dvb_frontend_debug)
-				printk("%s switch command: 0x%04lx\n", __func__, cmd);
+				printk("%s switch command: 0x%04lx\n", __func__, swcmd);
 			do_gettimeofday(&nexttime);
 			if (dvb_frontend_debug)
 				memcpy(&tv[0], &nexttime, sizeof(struct timeval));
@@ -908,12 +908,12 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file,
 			for (i = 0; i < 9; i++) {
 				if (dvb_frontend_debug)
 					do_gettimeofday(&tv[i + 1]);
-				if ((cmd & 0x01) != last) {
+				if ((swcmd & 0x01) != last) {
 					/* set voltage to (last ? 13V : 18V) */
 					fe->ops.set_voltage(fe, (last) ? SEC_VOLTAGE_13 : SEC_VOLTAGE_18);
 					last = (last) ? 0 : 1;
 				}
-				cmd = cmd >> 1;
+				swcmd = swcmd >> 1;
 				if (i != 8)
 					dvb_frontend_sleep_until(&nexttime, 8000);
 			}

drivers/media/dvb/dvb-usb/cxusb.c

@@ -210,7 +210,7 @@ static int cxusb_aver_power_ctrl(struct dvb_usb_device *d, int onoff)
 	if (d->state == DVB_USB_STATE_INIT &&
 	    usb_set_interface(d->udev, 0, 0) < 0)
 		err("set interface failed");
-	do; while (!(ret = cxusb_ctrl_msg(d, CMD_POWER_ON, NULL, 0, NULL, 0)) &&
+	do {} while (!(ret = cxusb_ctrl_msg(d, CMD_POWER_ON, NULL, 0, NULL, 0)) &&
 		   !(ret = cxusb_ctrl_msg(d, 0x15, NULL, 0, NULL, 0)) &&
 		   !(ret = cxusb_ctrl_msg(d, 0x17, NULL, 0, NULL, 0)) && 0);
 	if (!ret) {

drivers/media/dvb/dvb-usb/dib0700_devices.c

@@ -1117,7 +1117,8 @@ struct usb_device_id dib0700_usb_id_table[] = {
 	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_CINERGY_HT_EXPRESS) },
 	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_CINERGY_T_XXS) },
 	{ USB_DEVICE(USB_VID_LEADTEK,   USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) },
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) },
+/* 35 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) },
+	{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_3) },
 	{ 0 }		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -1373,7 +1374,7 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			}
 		},
 
-		.num_device_descs = 3,
+		.num_device_descs = 4,
 		.devices = {
 			{   "DiBcom STK7070PD reference design",
 				{ &dib0700_usb_id_table[17], NULL },
@@ -1386,6 +1387,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			{   "Hauppauge Nova-TD Stick (52009)",
 				{ &dib0700_usb_id_table[35], NULL },
 				{ NULL },
+			},
+			{   "Hauppauge Nova-TD-500 (84xxx)",
+				{ &dib0700_usb_id_table[36], NULL },
+				{ NULL },
 			}
 		}
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,

drivers/media/dvb/dvb-usb/dvb-usb-ids.h

@@ -129,6 +129,7 @@
 #define USB_PID_WINTV_NOVA_T_USB2_WARM			0x9301
 #define USB_PID_HAUPPAUGE_NOVA_T_500			0x9941
 #define USB_PID_HAUPPAUGE_NOVA_T_500_2			0x9950
+#define USB_PID_HAUPPAUGE_NOVA_T_500_3			0x8400
 #define USB_PID_HAUPPAUGE_NOVA_T_STICK			0x7050
 #define USB_PID_HAUPPAUGE_NOVA_T_STICK_2		0x7060
 #define USB_PID_HAUPPAUGE_NOVA_T_STICK_3		0x7070