usb: phy: tegra: Fix wrong PHY parameters

Some of the PHY parameters are not set according to the TRMs:

- UTMIP_FS_PREABMLE_J should be set, not cleared
- UTMIP_XCVR_LSBIAS_SEL should be cleared, not set
- UTMIP_PD_CHRG should be set in host mode and cleared in device mode
- UTMIP_XCVR_SETUP is a two-part field; the upper bits were not set
  properly

Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

drivers/usb/phy/phy-tegra-usb.c

@@ -86,11 +86,13 @@
 
 #define UTMIP_XCVR_CFG0		0x808
 #define   UTMIP_XCVR_SETUP(x)			(((x) & 0xf) << 0)
+#define   UTMIP_XCVR_SETUP_MSB(x)		((((x) & 0x70) >> 4) << 22)
 #define   UTMIP_XCVR_LSRSLEW(x)			(((x) & 0x3) << 8)
 #define   UTMIP_XCVR_LSFSLEW(x)			(((x) & 0x3) << 10)
 #define   UTMIP_FORCE_PD_POWERDOWN		(1 << 14)
 #define   UTMIP_FORCE_PD2_POWERDOWN		(1 << 16)
 #define   UTMIP_FORCE_PDZI_POWERDOWN		(1 << 18)
+#define   UTMIP_XCVR_LSBIAS_SEL			(1 << 21)
 #define   UTMIP_XCVR_HSSLEW_MSB(x)		(((x) & 0x7f) << 25)
 
 #define UTMIP_BIAS_CFG0		0x80c
@@ -342,7 +344,7 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy)
 	}
 
 	val = readl(base + UTMIP_TX_CFG0);
-	val &= ~UTMIP_FS_PREABMLE_J;
+	val |= UTMIP_FS_PREABMLE_J;
 	writel(val, base + UTMIP_TX_CFG0);
 
 	val = readl(base + UTMIP_HSRX_CFG0);
@@ -381,16 +383,26 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy)
 		val = readl(base + USB_SUSP_CTRL);
 		val &= ~(USB_WAKE_ON_CNNT_EN_DEV | USB_WAKE_ON_DISCON_EN_DEV);
 		writel(val, base + USB_SUSP_CTRL);
+
+		val = readl(base + UTMIP_BAT_CHRG_CFG0);
+		val &= ~UTMIP_PD_CHRG;
+		writel(val, base + UTMIP_BAT_CHRG_CFG0);
+	} else {
+		val = readl(base + UTMIP_BAT_CHRG_CFG0);
+		val |= UTMIP_PD_CHRG;
+		writel(val, base + UTMIP_BAT_CHRG_CFG0);
 	}
 
 	utmip_pad_power_on(phy);
 
 	val = readl(base + UTMIP_XCVR_CFG0);
 	val &= ~(UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN |
-		 UTMIP_FORCE_PDZI_POWERDOWN | UTMIP_XCVR_SETUP(~0) |
+		 UTMIP_FORCE_PDZI_POWERDOWN | UTMIP_XCVR_LSBIAS_SEL |
+		 UTMIP_XCVR_SETUP(~0) | UTMIP_XCVR_SETUP_MSB(~0) |
 		 UTMIP_XCVR_LSFSLEW(~0) | UTMIP_XCVR_LSRSLEW(~0) |
 		 UTMIP_XCVR_HSSLEW_MSB(~0));
 	val |= UTMIP_XCVR_SETUP(config->xcvr_setup);
+	val |= UTMIP_XCVR_SETUP_MSB(config->xcvr_setup);
 	val |= UTMIP_XCVR_LSFSLEW(config->xcvr_lsfslew);
 	val |= UTMIP_XCVR_LSRSLEW(config->xcvr_lsrslew);
 	writel(val, base + UTMIP_XCVR_CFG0);
@@ -401,10 +413,6 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy)
 	val |= UTMIP_XCVR_TERM_RANGE_ADJ(config->term_range_adj);
 	writel(val, base + UTMIP_XCVR_CFG1);
 
-	val = readl(base + UTMIP_BAT_CHRG_CFG0);
-	val &= ~UTMIP_PD_CHRG;
-	writel(val, base + UTMIP_BAT_CHRG_CFG0);
-
 	val = readl(base + UTMIP_BIAS_CFG1);
 	val &= ~UTMIP_BIAS_PDTRK_COUNT(~0);
 	val |= UTMIP_BIAS_PDTRK_COUNT(0x5);