[PATCH] bnx2: refine bnx2_poll

Refine bnx2_poll() logic to write back the most up-to-date status tag
when all work has been processed. This eliminates some occasional
extra interrupts when a older status tag is written even though all
work has been processed.

The idea is to read the status tag just before exiting bnx2_poll() and
then check again for any new work. If no new work is pending, the
status tag written back will not generate any extra interrupt. This
logic is similar to the changes David Miller did to tg3_poll().

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/bnx2.c

@@ -1533,10 +1533,11 @@ bnx2_phy_int(struct bnx2 *bp)
 static void
 bnx2_tx_int(struct bnx2 *bp)
 {
+	struct status_block *sblk = bp->status_blk;
 	u16 hw_cons, sw_cons, sw_ring_cons;
 	int tx_free_bd = 0;
 
-	hw_cons = bp->status_blk->status_tx_quick_consumer_index0;
+	hw_cons = bp->hw_tx_cons = sblk->status_tx_quick_consumer_index0;
 	if ((hw_cons & MAX_TX_DESC_CNT) == MAX_TX_DESC_CNT) {
 		hw_cons++;
 	}
@@ -1591,7 +1592,9 @@ bnx2_tx_int(struct bnx2 *bp)
 
 		dev_kfree_skb_irq(skb);
 
-		hw_cons = bp->status_blk->status_tx_quick_consumer_index0;
+		hw_cons = bp->hw_tx_cons =
+			sblk->status_tx_quick_consumer_index0;
+
 		if ((hw_cons & MAX_TX_DESC_CNT) == MAX_TX_DESC_CNT) {
 			hw_cons++;
 		}
@@ -1636,11 +1639,12 @@ bnx2_reuse_rx_skb(struct bnx2 *bp, struct sk_buff *skb,
 static int
 bnx2_rx_int(struct bnx2 *bp, int budget)
 {
+	struct status_block *sblk = bp->status_blk;
 	u16 hw_cons, sw_cons, sw_ring_cons, sw_prod, sw_ring_prod;
 	struct l2_fhdr *rx_hdr;
 	int rx_pkt = 0;
 
-	hw_cons = bp->status_blk->status_rx_quick_consumer_index0;
+	hw_cons = bp->hw_rx_cons = sblk->status_rx_quick_consumer_index0;
 	if ((hw_cons & MAX_RX_DESC_CNT) == MAX_RX_DESC_CNT) {
 		hw_cons++;
 	}
@@ -1760,6 +1764,15 @@ next_rx:
 
 		if ((rx_pkt == budget))
 			break;
+
+		/* Refresh hw_cons to see if there is new work */
+		if (sw_cons == hw_cons) {
+			hw_cons = bp->hw_rx_cons =
+				sblk->status_rx_quick_consumer_index0;
+			if ((hw_cons & MAX_RX_DESC_CNT) == MAX_RX_DESC_CNT)
+				hw_cons++;
+			rmb();
+		}
 	}
 	bp->rx_cons = sw_cons;
 	bp->rx_prod = sw_prod;
@@ -1827,15 +1840,27 @@ bnx2_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
 	return IRQ_HANDLED;
 }
 
+static inline int
+bnx2_has_work(struct bnx2 *bp)
+{
+	struct status_block *sblk = bp->status_blk;
+
+	if ((sblk->status_rx_quick_consumer_index0 != bp->hw_rx_cons) ||
+	    (sblk->status_tx_quick_consumer_index0 != bp->hw_tx_cons))
+		return 1;
+
+	if (((sblk->status_attn_bits & STATUS_ATTN_BITS_LINK_STATE) != 0) !=
+	    bp->link_up)
+		return 1;
+
+	return 0;
+}
+
 static int
 bnx2_poll(struct net_device *dev, int *budget)
 {
 	struct bnx2 *bp = dev->priv;
-	int rx_done = 1;
-
-	bp->last_status_idx = bp->status_blk->status_idx;
 
-	rmb();
 	if ((bp->status_blk->status_attn_bits &
 		STATUS_ATTN_BITS_LINK_STATE) !=
 		(bp->status_blk->status_attn_bits_ack &
@@ -1846,11 +1871,10 @@ bnx2_poll(struct net_device *dev, int *budget)
 		spin_unlock(&bp->phy_lock);
 	}
 
-	if (bp->status_blk->status_tx_quick_consumer_index0 != bp->tx_cons) {
+	if (bp->status_blk->status_tx_quick_consumer_index0 != bp->hw_tx_cons)
 		bnx2_tx_int(bp);
-	}
 
-	if (bp->status_blk->status_rx_quick_consumer_index0 != bp->rx_cons) {
+	if (bp->status_blk->status_rx_quick_consumer_index0 != bp->hw_rx_cons) {
 		int orig_budget = *budget;
 		int work_done;
 
@@ -1860,13 +1884,12 @@ bnx2_poll(struct net_device *dev, int *budget)
 		work_done = bnx2_rx_int(bp, orig_budget);
 		*budget -= work_done;
 		dev->quota -= work_done;
-		
-		if (work_done >= orig_budget) {
-			rx_done = 0;
-		}
 	}
 	
-	if (rx_done) {
+	bp->last_status_idx = bp->status_blk->status_idx;
+	rmb();
+
+	if (!bnx2_has_work(bp)) {
 		netif_rx_complete(dev);
 		REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD,
 			BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID |
@@ -3222,6 +3245,7 @@ bnx2_init_tx_ring(struct bnx2 *bp)
 
 	bp->tx_prod = 0;
 	bp->tx_cons = 0;
+	bp->hw_tx_cons = 0;
 	bp->tx_prod_bseq = 0;
 	
 	val = BNX2_L2CTX_TYPE_TYPE_L2;
@@ -3254,6 +3278,7 @@ bnx2_init_rx_ring(struct bnx2 *bp)
 
 	ring_prod = prod = bp->rx_prod = 0;
 	bp->rx_cons = 0;
+	bp->hw_rx_cons = 0;
 	bp->rx_prod_bseq = 0;
 		
 	rxbd = &bp->rx_desc_ring[0];

drivers/net/bnx2.h

@@ -3914,6 +3914,9 @@ struct bnx2 {
 	u16			tx_cons;
 	int			tx_ring_size;
 
+	u16			hw_tx_cons;
+	u16			hw_rx_cons;
+
 #ifdef BCM_VLAN 
 	struct			vlan_group *vlgrp;
 #endif