brcm80211: replace broadcom specific defines

AMPDU_RX_FACTOR_64K -> IEEE80211_HT_MAX_AMPDU_64K
AMPDU_RX_FACTOR_32K -> IEEE80211_HT_MAX_AMPDU_32K
DOT11_MAX_KEY_SIZE -> WLAN_MAX_KEY_LEN
HT_CAP_MIMO_PS_MASK -> IEEE80211_HT_CAP_SM_PS
HT_CAP_MAX_AMSDU -> IEEE80211_HT_CAP_MAX_AMSDU
HT_CAP_RX_STBC_MASK -> IEEE80211_HT_CAP_RX_STBC
HT_CAP_RX_STBC_SHIFT -> IEEE80211_HT_CAP_RX_STBC_SHIFT
HT_PARAMS_RX_FACTOR_MASK -> IEEE80211_HT_AMPDU_PARM_FACTOR

Signed-off-by: Stanislav Fomichev <kernel@fomichev.me>
Acked-by: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c

@@ -1766,7 +1766,7 @@ wl_cfg80211_get_key(struct wiphy *wiphy, struct net_device *dev,
 	key.index = key_idx;
 	swap_key_to_BE(&key);
 	memset(&params, 0, sizeof(params));
-	params.key_len = (u8) min_t(u8, DOT11_MAX_KEY_SIZE, key.len);
+	params.key_len = (u8) min_t(u8, WLAN_MAX_KEY_LEN, key.len);
 	memcpy(params.key, key.data, params.key_len);
 
 	err = wl_dev_ioctl(dev, WLC_GET_WSEC, &wsec, sizeof(wsec));

drivers/staging/brcm80211/brcmfmac/wl_iw.c

@@ -2435,7 +2435,7 @@ wl_iw_get_encode(struct net_device *dev,
 
 	wsec = le32_to_cpu(wsec);
 	auth = le32_to_cpu(auth);
-	dwrq->length = min_t(u16, DOT11_MAX_KEY_SIZE, key.len);
+	dwrq->length = min_t(u16, WLAN_MAX_KEY_LEN, key.len);
 
 	dwrq->flags = key.index + 1;
 	if (!(wsec & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED)))

drivers/staging/brcm80211/brcmsmac/wl_mac80211.c

@@ -595,7 +595,7 @@ wl_ops_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 		  AMPDU_MAX_SCB_TID * PKTQ_LEN_DEFAULT);
 
 	sta->ht_cap.ht_supported = true;
-	sta->ht_cap.ampdu_factor = AMPDU_RX_FACTOR_64K;
+	sta->ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
 	sta->ht_cap.ampdu_density = AMPDU_DEF_MPDU_DENSITY;
 	sta->ht_cap.cap = IEEE80211_HT_CAP_GRN_FLD |
 	    IEEE80211_HT_CAP_SGI_20 |
@@ -989,7 +989,7 @@ static struct ieee80211_supported_band wl_band_2GHz_nphy = {
 		   IEEE80211_HT_CAP_SGI_20 |
 		   IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_40MHZ_INTOLERANT,
 		   .ht_supported = true,
-		   .ampdu_factor = AMPDU_RX_FACTOR_64K,
+		   .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K,
 		   .ampdu_density = AMPDU_DEF_MPDU_DENSITY,
 		   .mcs = {
 			   /* placeholders for now */
@@ -1009,7 +1009,7 @@ static struct ieee80211_supported_band wl_band_5GHz_nphy = {
 		   /* use IEEE80211_HT_CAP_* from include/linux/ieee80211.h */
 		   .cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_40MHZ_INTOLERANT,	/* No 40 mhz yet */
 		   .ht_supported = true,
-		   .ampdu_factor = AMPDU_RX_FACTOR_64K,
+		   .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K,
 		   .ampdu_density = AMPDU_DEF_MPDU_DENSITY,
 		   .mcs = {
 			   /* placeholders for now */

drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c

@@ -201,9 +201,9 @@ struct ampdu_info *wlc_ampdu_attach(struct wlc_info *wlc)
 	ampdu->ffpld_rsvd = AMPDU_DEF_FFPLD_RSVD;
 	/* bump max ampdu rcv size to 64k for all 11n devices except 4321A0 and 4321A1 */
 	if (WLCISNPHY(wlc->band) && NREV_LT(wlc->band->phyrev, 2))
-		ampdu->rx_factor = AMPDU_RX_FACTOR_32K;
+		ampdu->rx_factor = IEEE80211_HT_MAX_AMPDU_32K;
 	else
-		ampdu->rx_factor = AMPDU_RX_FACTOR_64K;
+		ampdu->rx_factor = IEEE80211_HT_MAX_AMPDU_64K;
 	ampdu->retry_limit = AMPDU_DEF_RETRY_LIMIT;
 	ampdu->rr_retry_limit = AMPDU_DEF_RR_RETRY_LIMIT;
 
@@ -1340,8 +1340,8 @@ void wlc_ampdu_shm_upd(struct ampdu_info *ampdu)
 	struct wlc_info *wlc = ampdu->wlc;
 
 	/* Extend ucode internal watchdog timer to match larger received frames */
-	if ((ampdu->rx_factor & HT_PARAMS_RX_FACTOR_MASK) ==
-	    AMPDU_RX_FACTOR_64K) {
+	if ((ampdu->rx_factor & IEEE80211_HT_AMPDU_PARM_FACTOR) ==
+	    IEEE80211_HT_MAX_AMPDU_64K) {
 		wlc_write_shm(wlc, M_MIMO_MAXSYM, MIMO_MAXSYM_MAX);
 		wlc_write_shm(wlc, M_WATCHDOG_8TU, WATCHDOG_8TU_MAX);
 	} else {

drivers/staging/brcm80211/brcmsmac/wlc_key.h

@@ -98,7 +98,7 @@ typedef struct wsec_key {
 	s8 icv_len;		/* ICV length */
 	u32 len;		/* key length..don't move this var */
 	/* data is 4byte aligned */
-	u8 data[DOT11_MAX_KEY_SIZE];	/* key data */
+	u8 data[WLAN_MAX_KEY_LEN];	/* key data */
 	wsec_iv_t rxiv[WLC_NUMRXIVS];	/* Rx IV (one per TID) */
 	wsec_iv_t txiv;		/* Tx IV */
 

drivers/staging/brcm80211/brcmsmac/wlc_mac80211.c

@@ -8304,7 +8304,7 @@ void wlc_reset_bmac_done(struct wlc_info *wlc)
 
 void wlc_ht_mimops_cap_update(struct wlc_info *wlc, u8 mimops_mode)
 {
-	wlc->ht_cap.cap_info &= ~HT_CAP_MIMO_PS_MASK;
+	wlc->ht_cap.cap_info &= ~IEEE80211_HT_CAP_SM_PS;
 	wlc->ht_cap.cap_info |= (mimops_mode << IEEE80211_HT_CAP_SM_PS_SHIFT);
 
 	if (AP_ENAB(wlc->pub) && wlc->clk) {

drivers/staging/brcm80211/brcmsmac/wlc_pub.h

@@ -142,9 +142,9 @@ struct rsn_parms {
 #define AMPDU_DEF_MPDU_DENSITY	6	/* default mpdu density (110 ==> 4us) */
 
 /* defaults for the HT (MIMO) bss */
-#define HT_CAP	((HT_CAP_MIMO_PS_OFF << IEEE80211_HT_CAP_SM_PS_SHIFT) |\
+#define HT_CAP	(IEEE80211_HT_CAP_SM_PS |\
 	IEEE80211_HT_CAP_SUP_WIDTH_20_40 | IEEE80211_HT_CAP_GRN_FLD |\
-	HT_CAP_MAX_AMSDU | IEEE80211_HT_CAP_DSSSCCK40)
+	IEEE80211_HT_CAP_MAX_AMSDU | IEEE80211_HT_CAP_DSSSCCK40)
 
 /* wlc internal bss_info, wl external one is in wlioctl.h */
 typedef struct wlc_bss_info {

drivers/staging/brcm80211/brcmsmac/wlc_stf.c

@@ -80,8 +80,8 @@ static void wlc_stf_stbc_rx_ht_update(struct wlc_info *wlc, int val)
 			return;
 	}
 
-	wlc->ht_cap.cap_info &= ~HT_CAP_RX_STBC_MASK;
-	wlc->ht_cap.cap_info |= (val << HT_CAP_RX_STBC_SHIFT);
+	wlc->ht_cap.cap_info &= ~IEEE80211_HT_CAP_RX_STBC;
+	wlc->ht_cap.cap_info |= (val << IEEE80211_HT_CAP_RX_STBC_SHIFT);
 
 	if (wlc->pub->up) {
 		wlc_update_beacon(wlc);

drivers/staging/brcm80211/include/proto/802.11.h

@@ -186,22 +186,10 @@ typedef struct d11cnt {
 
 #define HT_CAP_IE_LEN		26
 
-#define HT_CAP_MIMO_PS_MASK	0x000C
-#define HT_CAP_MIMO_PS_OFF	0x0003
-#define HT_CAP_MIMO_PS_ON	0x0000
-#define HT_CAP_RX_STBC_MASK	0x0300
-#define HT_CAP_RX_STBC_SHIFT	8
-#define HT_CAP_MAX_AMSDU	0x0800
-
 #define HT_CAP_RX_STBC_NO		0x0
 #define HT_CAP_RX_STBC_ONE_STREAM	0x1
 
-#define HT_PARAMS_RX_FACTOR_MASK	0x03
-
-#define AMPDU_MAX_MPDU_DENSITY	7
-#define AMPDU_RX_FACTOR_16K	1
-#define AMPDU_RX_FACTOR_32K	2
-#define AMPDU_RX_FACTOR_64K	3
+#define AMPDU_MAX_MPDU_DENSITY	IEEE80211_HT_MPDU_DENSITY_16
 
 #define AMPDU_DELIMITER_LEN	4
 
@@ -220,7 +208,6 @@ typedef struct d11cnt {
 #define RSN_AKM_PSK		2
 
 #define DOT11_MAX_DEFAULT_KEYS	4
-#define DOT11_MAX_KEY_SIZE	32
 #define DOT11_WPA_KEY_RSC_LEN   8
 
 #define BRCM_OUI		"\x00\x10\x18"

drivers/staging/brcm80211/include/wlioctl.h

@@ -474,7 +474,7 @@ typedef struct wl_rm_rep {
 typedef struct wl_wsec_key {
 	u32 index;		/* key index */
 	u32 len;		/* key length */
-	u8 data[DOT11_MAX_KEY_SIZE];	/* key data */
+	u8 data[WLAN_MAX_KEY_LEN];	/* key data */
 	u32 pad_1[18];
 	u32 algo;		/* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
 	u32 flags;		/* misc flags */