iwlwifi: do not clear data after chain noise calib

Chain noise calibration data are cleared after the calibration is done
in iwlagn_gain_computation() and iwl4965_gain_computation(). This cause
the debugfs entries for those data useless. To provide valid debugging
info, clear those data right before starting the calibration instead.

Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>

drivers/net/wireless/iwlwifi/iwl-4965.c

@@ -346,9 +346,19 @@ static void iwl4965_chain_noise_reset(struct iwl_priv *priv)
 {
 	struct iwl_chain_noise_data *data = &(priv->chain_noise_data);
 
-	if ((data->state == IWL_CHAIN_NOISE_ALIVE) && iwl_is_associated(priv)) {
+	if ((data->state == IWL_CHAIN_NOISE_ALIVE) &&
+	     iwl_is_associated(priv)) {
 		struct iwl_calib_diff_gain_cmd cmd;
 
+		/* clear data for chain noise calibration algorithm */
+		data->chain_noise_a = 0;
+		data->chain_noise_b = 0;
+		data->chain_noise_c = 0;
+		data->chain_signal_a = 0;
+		data->chain_signal_b = 0;
+		data->chain_signal_c = 0;
+		data->beacon_count = 0;
+
 		memset(&cmd, 0, sizeof(cmd));
 		cmd.hdr.op_code = IWL_PHY_CALIBRATE_DIFF_GAIN_CMD;
 		cmd.diff_gain_a = 0;
@@ -419,13 +429,6 @@ static void iwl4965_gain_computation(struct iwl_priv *priv,
 		/* Mark so we run this algo only once! */
 		data->state = IWL_CHAIN_NOISE_CALIBRATED;
 	}
-	data->chain_noise_a = 0;
-	data->chain_noise_b = 0;
-	data->chain_noise_c = 0;
-	data->chain_signal_a = 0;
-	data->chain_signal_b = 0;
-	data->chain_signal_c = 0;
-	data->beacon_count = 0;
 }
 
 static void iwl4965_bg_txpower_work(struct work_struct *work)

drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c

@@ -176,14 +176,6 @@ static void iwlagn_gain_computation(struct iwl_priv *priv,
 		data->radio_write = 1;
 		data->state = IWL_CHAIN_NOISE_CALIBRATED;
 	}
-
-	data->chain_noise_a = 0;
-	data->chain_noise_b = 0;
-	data->chain_noise_c = 0;
-	data->chain_signal_a = 0;
-	data->chain_signal_b = 0;
-	data->chain_signal_c = 0;
-	data->beacon_count = 0;
 }
 
 static void iwlagn_chain_noise_reset(struct iwl_priv *priv)
@@ -191,10 +183,20 @@ static void iwlagn_chain_noise_reset(struct iwl_priv *priv)
 	struct iwl_chain_noise_data *data = &priv->chain_noise_data;
 	int ret;
 
-	if ((data->state == IWL_CHAIN_NOISE_ALIVE) && iwl_is_associated(priv)) {
+	if ((data->state == IWL_CHAIN_NOISE_ALIVE) &&
+	     iwl_is_associated(priv)) {
 		struct iwl_calib_chain_noise_reset_cmd cmd;
-		memset(&cmd, 0, sizeof(cmd));
 
+		/* clear data for chain noise calibration algorithm */
+		data->chain_noise_a = 0;
+		data->chain_noise_b = 0;
+		data->chain_noise_c = 0;
+		data->chain_signal_a = 0;
+		data->chain_signal_b = 0;
+		data->chain_signal_c = 0;
+		data->beacon_count = 0;
+
+		memset(&cmd, 0, sizeof(cmd));
 		cmd.hdr.op_code = IWL_PHY_CALIBRATE_CHAIN_NOISE_RESET_CMD;
 		cmd.hdr.first_group = 0;
 		cmd.hdr.groups_num = 1;