|
@@ -336,10 +336,10 @@ static void at91_mci_handle_transmitted(struct at91mci_host *host)
|
|
|
static void at91_mci_enable(struct at91mci_host *host)
|
|
|
{
|
|
|
at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN);
|
|
|
- at91_mci_write(host, AT91_MCI_IDR, 0xFFFFFFFF);
|
|
|
+ at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
|
|
|
at91_mci_write(host, AT91_MCI_DTOR, AT91_MCI_DTOMUL_1M | AT91_MCI_DTOCYC);
|
|
|
- at91_mci_write(host, AT91_MCI_MR, 0x834A);
|
|
|
- at91_mci_write(host, AT91_MCI_SDCR, 0x0);
|
|
|
+ at91_mci_write(host, AT91_MCI_MR, AT91_MCI_PDCMODE | 0x34a);
|
|
|
+ at91_mci_write(host, AT91_MCI_SDCR, 0);
|
|
|
}
|
|
|
|
|
|
/*
|
|
@@ -420,7 +420,7 @@ static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_
|
|
|
/*
|
|
|
* Set the arguments and send the command
|
|
|
*/
|
|
|
- pr_debug("Sending command %d as %08X, arg = %08X, blocks = %d, length = %d (MR = %08lX)\n",
|
|
|
+ pr_debug("Sending command %d as %08X, arg = %08X, blocks = %d, length = %d (MR = %08X)\n",
|
|
|
cmd->opcode, cmdr, cmd->arg, blocks, block_length, at91_mci_read(host, AT91_MCI_MR));
|
|
|
|
|
|
if (!data) {
|
|
@@ -659,7 +659,7 @@ static irqreturn_t at91_mci_irq(int irq, void *devid)
|
|
|
int_status = at91_mci_read(host, AT91_MCI_SR);
|
|
|
int_mask = at91_mci_read(host, AT91_MCI_IMR);
|
|
|
|
|
|
- pr_debug("MCI irq: status = %08X, %08lX, %08lX\n", int_status, int_mask,
|
|
|
+ pr_debug("MCI irq: status = %08X, %08X, %08X\n", int_status, int_mask,
|
|
|
int_status & int_mask);
|
|
|
|
|
|
int_status = int_status & int_mask;
|
|
@@ -825,7 +825,7 @@ static int at91_mci_probe(struct platform_device *pdev)
|
|
|
#ifdef SUPPORT_4WIRE
|
|
|
mmc->caps |= MMC_CAP_4_BIT_DATA;
|
|
|
#else
|
|
|
- printk("MMC: 4 wire bus mode not supported by this driver - using 1 wire\n");
|
|
|
+ printk("AT91 MMC: 4 wire bus mode not supported by this driver - using 1 wire\n");
|
|
|
#endif
|
|
|
}
|
|
|
|
|
@@ -864,7 +864,7 @@ static int at91_mci_probe(struct platform_device *pdev)
|
|
|
host->irq = platform_get_irq(pdev, 0);
|
|
|
ret = request_irq(host->irq, at91_mci_irq, IRQF_SHARED, DRIVER_NAME, host);
|
|
|
if (ret) {
|
|
|
- printk(KERN_ERR "Failed to request MCI interrupt\n");
|
|
|
+ printk(KERN_ERR "AT91 MMC: Failed to request MCI interrupt\n");
|
|
|
clk_disable(host->mci_clk);
|
|
|
clk_put(host->mci_clk);
|
|
|
mmc_free_host(mmc);
|
|
@@ -892,10 +892,10 @@ static int at91_mci_probe(struct platform_device *pdev)
|
|
|
ret = request_irq(host->board->det_pin, at91_mmc_det_irq,
|
|
|
0, DRIVER_NAME, host);
|
|
|
if (ret)
|
|
|
- printk(KERN_ERR "couldn't allocate MMC detect irq\n");
|
|
|
+ printk(KERN_ERR "AT91 MMC: Couldn't allocate MMC detect irq\n");
|
|
|
}
|
|
|
|
|
|
- pr_debug(KERN_INFO "Added MCI driver\n");
|
|
|
+ pr_debug("Added MCI driver\n");
|
|
|
|
|
|
return 0;
|
|
|
}
|