PCI: probing debug message uniformization

This patch uniformizes PCI probing debug boot messages with dev_printk()
intead of manual printk()

It changes adress range output from [%llx, %llx] to [%#llx-%#llx], like
in pci_request_region().

For example, it goes from the mixed-style:

PCI: 0000:00:1b.0 reg 10 64bit mmio: [f4280000, f4283fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

to uniform:

pci 0000:00:1b.0: reg 10 64bit mmio: [0xf4280000-0xf4283fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

This patch has been runtime tested, boot log messages diffed, everything
looks OK.

Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Vincent Legoll <vincent.legoll@gmail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

drivers/pci/pcie/aspm.c

@@ -528,9 +528,9 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev)
 		pci_read_config_dword(child_dev, child_pos + PCI_EXP_DEVCAP,
 			&reg32);
 		if (!(reg32 & PCI_EXP_DEVCAP_RBER) && !aspm_force) {
-			printk("Pre-1.1 PCIe device detected, "
-				"disable ASPM for %s. It can be enabled forcedly"
-				" with 'pcie_aspm=force'\n", pci_name(pdev));
+			dev_printk(KERN_INFO, &child_dev->dev, "disabling ASPM"
+				" on pre-1.1 PCIe device.  You can enable it"
+				" with 'pcie_aspm=force'\n");
 			return -EINVAL;
 		}
 	}

drivers/pci/probe.c

@@ -302,8 +302,8 @@ static int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 		} else {
 			res->start = l64;
 			res->end = l64 + sz64;
-			printk(KERN_DEBUG "PCI: %s reg %x 64bit mmio: %pR\n",
-				pci_name(dev), pos, res);
+			dev_printk(KERN_DEBUG, &dev->dev,
+				"reg %x 64bit mmio: %pR\n", pos, res);
 		}
 	} else {
 		sz = pci_size(l, sz, mask);
@@ -313,10 +313,10 @@ static int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 
 		res->start = l;
 		res->end = l + sz;
-		printk(KERN_DEBUG "PCI: %s reg %x %s: %pR\n",
-		       pci_name(dev), pos,
-		       (res->flags & IORESOURCE_IO) ? "io port":"32bit mmio",
-		       res);
+
+		dev_printk(KERN_DEBUG, &dev->dev, "reg %x %s: %pR\n", pos,
+			(res->flags & IORESOURCE_IO) ? "io port" : "32bit mmio",
+			res);
 	}
 
  out:
@@ -387,8 +387,7 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
 			res->start = base;
 		if (!res->end)
 			res->end = limit + 0xfff;
-		printk(KERN_DEBUG "PCI: bridge %s io port: %pR\n",
-		       pci_name(dev), res);
+		dev_printk(KERN_DEBUG, &dev->dev, "bridge io port: %pR\n", res);
 	}
 
 	res = child->resource[1];
@@ -400,8 +399,8 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
 		res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
 		res->start = base;
 		res->end = limit + 0xfffff;
-		printk(KERN_DEBUG "PCI: bridge %s 32bit mmio: %pR\n",
-		       pci_name(dev), res);
+		dev_printk(KERN_DEBUG, &dev->dev, "bridge 32bit mmio: %pR\n",
+			res);
 	}
 
 	res = child->resource[2];
@@ -437,9 +436,9 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
 		res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH;
 		res->start = base;
 		res->end = limit + 0xfffff;
-		printk(KERN_DEBUG "PCI: bridge %s %sbit mmio pref: %pR\n",
-		       pci_name(dev),
-		       (res->flags & PCI_PREF_RANGE_TYPE_64) ? "64":"32", res);
+		dev_printk(KERN_DEBUG, &dev->dev, "bridge %sbit mmio pref: %pR\n",
+			(res->flags & PCI_PREF_RANGE_TYPE_64) ? "64" : "32",
+			res);
 	}
 }