Merge branch 'viafb-pll' into viafb-next

Conflicts:
	drivers/video/via/viamode.c

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

drivers/video/Kconfig

@@ -1607,6 +1607,17 @@ config FB_VIA_DIRECT_PROCFS
 	  correct output device configuration.
 	  Its use is strongly discouraged.
 
+config FB_VIA_X_COMPATIBILITY
+	bool "X server compatibility"
+	depends on FB_VIA
+	default n
+	help
+	  This option reduces the functionality (power saving, ...) of the
+	  framebuffer to avoid negative impact on the OpenChrome X server.
+	  If you use any X server other than fbdev you should enable this
+	  otherwise it should be safe to disable it and allow using all
+	  features.
+
 endif
 
 config FB_NEOMAGIC

drivers/video/via/Makefile

@@ -6,4 +6,4 @@ obj-$(CONFIG_FB_VIA) += viafb.o
 
 viafb-y	:=viafbdev.o hw.o via_i2c.o dvi.o lcd.o ioctl.o accel.o \
 	via_utility.o vt1636.o global.o tblDPASetting.o viamode.o \
-	via-core.o via-gpio.o via_modesetting.o
+	via-core.o via-gpio.o via_modesetting.o via_clock.o

drivers/video/via/hw.c

@@ -22,273 +22,82 @@
 #include <linux/via-core.h>
 #include <asm/olpc.h>
 #include "global.h"
-
-static struct pll_config cle266_pll_config[] = {
-	{19, 4, 0},
-	{26, 5, 0},
-	{28, 5, 0},
-	{31, 5, 0},
-	{33, 5, 0},
-	{55, 5, 0},
-	{102, 5, 0},
-	{53, 6, 0},
-	{92, 6, 0},
-	{98, 6, 0},
-	{112, 6, 0},
-	{41, 7, 0},
-	{60, 7, 0},
-	{99, 7, 0},
-	{100, 7, 0},
-	{83, 8, 0},
-	{86, 8, 0},
-	{108, 8, 0},
-	{87, 9, 0},
-	{118, 9, 0},
-	{95, 12, 0},
-	{115, 12, 0},
-	{108, 13, 0},
-	{83, 17, 0},
-	{67, 20, 0},
-	{86, 20, 0},
-	{98, 20, 0},
-	{121, 24, 0},
-	{99, 29, 0},
-	{33, 3, 1},
-	{15, 4, 1},
-	{23, 4, 1},
-	{37, 5, 1},
-	{83, 5, 1},
-	{85, 5, 1},
-	{94, 5, 1},
-	{103, 5, 1},
-	{109, 5, 1},
-	{113, 5, 1},
-	{121, 5, 1},
-	{82, 6, 1},
-	{31, 7, 1},
-	{55, 7, 1},
-	{84, 7, 1},
-	{83, 8, 1},
-	{76, 9, 1},
-	{127, 9, 1},
-	{33, 4, 2},
-	{75, 4, 2},
-	{119, 4, 2},
-	{121, 4, 2},
-	{91, 5, 2},
-	{118, 5, 2},
-	{83, 6, 2},
-	{109, 6, 2},
-	{90, 7, 2},
-	{93, 2, 3},
-	{53, 3, 3},
-	{73, 4, 3},
-	{89, 4, 3},
-	{105, 4, 3},
-	{117, 4, 3},
-	{101, 5, 3},
-	{121, 5, 3},
-	{127, 5, 3},
-	{99, 7, 3}
+#include "via_clock.h"
+
+static struct pll_limit cle266_pll_limits[] = {
+	{19, 19, 4, 0},
+	{26, 102, 5, 0},
+	{53, 112, 6, 0},
+	{41, 100, 7, 0},
+	{83, 108, 8, 0},
+	{87, 118, 9, 0},
+	{95, 115, 12, 0},
+	{108, 108, 13, 0},
+	{83, 83, 17, 0},
+	{67, 98, 20, 0},
+	{121, 121, 24, 0},
+	{99, 99, 29, 0},
+	{33, 33, 3, 1},
+	{15, 23, 4, 1},
+	{37, 121, 5, 1},
+	{82, 82, 6, 1},
+	{31, 84, 7, 1},
+	{83, 83, 8, 1},
+	{76, 127, 9, 1},
+	{33, 121, 4, 2},
+	{91, 118, 5, 2},
+	{83, 109, 6, 2},
+	{90, 90, 7, 2},
+	{93, 93, 2, 3},
+	{53, 53, 3, 3},
+	{73, 117, 4, 3},
+	{101, 127, 5, 3},
+	{99, 99, 7, 3}
 };
 
-static struct pll_config k800_pll_config[] = {
-	{22, 2, 0},
-	{28, 3, 0},
-	{81, 3, 1},
-	{85, 3, 1},
-	{98, 3, 1},
-	{112, 3, 1},
-	{86, 4, 1},
-	{166, 4, 1},
-	{109, 5, 1},
-	{113, 5, 1},
-	{121, 5, 1},
-	{131, 5, 1},
-	{143, 5, 1},
-	{153, 5, 1},
-	{66, 3, 2},
-	{68, 3, 2},
-	{95, 3, 2},
-	{106, 3, 2},
-	{116, 3, 2},
-	{93, 4, 2},
-	{119, 4, 2},
-	{121, 4, 2},
-	{133, 4, 2},
-	{137, 4, 2},
-	{117, 5, 2},
-	{118, 5, 2},
-	{120, 5, 2},
-	{124, 5, 2},
-	{132, 5, 2},
-	{137, 5, 2},
-	{141, 5, 2},
-	{166, 5, 2},
-	{170, 5, 2},
-	{191, 5, 2},
-	{206, 5, 2},
-	{208, 5, 2},
-	{30, 2, 3},
-	{69, 3, 3},
-	{82, 3, 3},
-	{83, 3, 3},
-	{109, 3, 3},
-	{114, 3, 3},
-	{125, 3, 3},
-	{89, 4, 3},
-	{103, 4, 3},
-	{117, 4, 3},
-	{126, 4, 3},
-	{150, 4, 3},
-	{161, 4, 3},
-	{121, 5, 3},
-	{127, 5, 3},
-	{131, 5, 3},
-	{134, 5, 3},
-	{148, 5, 3},
-	{169, 5, 3},
-	{172, 5, 3},
-	{182, 5, 3},
-	{195, 5, 3},
-	{196, 5, 3},
-	{208, 5, 3},
-	{66, 2, 4},
-	{85, 3, 4},
-	{141, 4, 4},
-	{146, 4, 4},
-	{161, 4, 4},
-	{177, 5, 4}
+static struct pll_limit k800_pll_limits[] = {
+	{22, 22, 2, 0},
+	{28, 28, 3, 0},
+	{81, 112, 3, 1},
+	{86, 166, 4, 1},
+	{109, 153, 5, 1},
+	{66, 116, 3, 2},
+	{93, 137, 4, 2},
+	{117, 208, 5, 2},
+	{30, 30, 2, 3},
+	{69, 125, 3, 3},
+	{89, 161, 4, 3},
+	{121, 208, 5, 3},
+	{66, 66, 2, 4},
+	{85, 85, 3, 4},
+	{141, 161, 4, 4},
+	{177, 177, 5, 4}
 };
 
-static struct pll_config cx700_pll_config[] = {
-	{98, 3, 1},
-	{86, 4, 1},
-	{109, 5, 1},
-	{110, 5, 1},
-	{113, 5, 1},
-	{121, 5, 1},
-	{131, 5, 1},
-	{135, 5, 1},
-	{142, 5, 1},
-	{143, 5, 1},
-	{153, 5, 1},
-	{187, 5, 1},
-	{208, 5, 1},
-	{68, 2, 2},
-	{95, 3, 2},
-	{116, 3, 2},
-	{93, 4, 2},
-	{119, 4, 2},
-	{133, 4, 2},
-	{137, 4, 2},
-	{151, 4, 2},
-	{166, 4, 2},
-	{110, 5, 2},
-	{112, 5, 2},
-	{117, 5, 2},
-	{118, 5, 2},
-	{120, 5, 2},
-	{132, 5, 2},
-	{137, 5, 2},
-	{141, 5, 2},
-	{151, 5, 2},
-	{166, 5, 2},
-	{175, 5, 2},
-	{191, 5, 2},
-	{206, 5, 2},
-	{174, 7, 2},
-	{82, 3, 3},
-	{109, 3, 3},
-	{117, 4, 3},
-	{150, 4, 3},
-	{161, 4, 3},
-	{112, 5, 3},
-	{115, 5, 3},
-	{121, 5, 3},
-	{127, 5, 3},
-	{129, 5, 3},
-	{131, 5, 3},
-	{134, 5, 3},
-	{138, 5, 3},
-	{148, 5, 3},
-	{157, 5, 3},
-	{169, 5, 3},
-	{172, 5, 3},
-	{190, 5, 3},
-	{195, 5, 3},
-	{196, 5, 3},
-	{208, 5, 3},
-	{141, 5, 4},
-	{150, 5, 4},
-	{166, 5, 4},
-	{176, 5, 4},
-	{177, 5, 4},
-	{183, 5, 4},
-	{202, 5, 4}
+static struct pll_limit cx700_pll_limits[] = {
+	{98, 98, 3, 1},
+	{86, 86, 4, 1},
+	{109, 208, 5, 1},
+	{68, 68, 2, 2},
+	{95, 116, 3, 2},
+	{93, 166, 4, 2},
+	{110, 206, 5, 2},
+	{174, 174, 7, 2},
+	{82, 109, 3, 3},
+	{117, 161, 4, 3},
+	{112, 208, 5, 3},
+	{141, 202, 5, 4}
 };
 
-static struct pll_config vx855_pll_config[] = {
-	{86, 4, 1},
-	{108, 5, 1},
-	{110, 5, 1},
-	{113, 5, 1},
-	{121, 5, 1},
-	{131, 5, 1},
-	{135, 5, 1},
-	{142, 5, 1},
-	{143, 5, 1},
-	{153, 5, 1},
-	{164, 5, 1},
-	{187, 5, 1},
-	{208, 5, 1},
-	{110, 5, 2},
-	{112, 5, 2},
-	{117, 5, 2},
-	{118, 5, 2},
-	{124, 5, 2},
-	{132, 5, 2},
-	{137, 5, 2},
-	{141, 5, 2},
-	{149, 5, 2},
-	{151, 5, 2},
-	{159, 5, 2},
-	{166, 5, 2},
-	{167, 5, 2},
-	{172, 5, 2},
-	{189, 5, 2},
-	{191, 5, 2},
-	{194, 5, 2},
-	{206, 5, 2},
-	{208, 5, 2},
-	{83, 3, 3},
-	{88, 3, 3},
-	{109, 3, 3},
-	{112, 3, 3},
-	{103, 4, 3},
-	{105, 4, 3},
-	{161, 4, 3},
-	{112, 5, 3},
-	{115, 5, 3},
-	{121, 5, 3},
-	{127, 5, 3},
-	{134, 5, 3},
-	{137, 5, 3},
-	{148, 5, 3},
-	{157, 5, 3},
-	{169, 5, 3},
-	{172, 5, 3},
-	{182, 5, 3},
-	{191, 5, 3},
-	{195, 5, 3},
-	{209, 5, 3},
-	{142, 4, 4},
-	{146, 4, 4},
-	{161, 4, 4},
-	{141, 5, 4},
-	{150, 5, 4},
-	{165, 5, 4},
-	{176, 5, 4}
+static struct pll_limit vx855_pll_limits[] = {
+	{86, 86, 4, 1},
+	{108, 208, 5, 1},
+	{110, 208, 5, 2},
+	{83, 112, 3, 3},
+	{103, 161, 4, 3},
+	{112, 209, 5, 3},
+	{142, 161, 4, 4},
+	{141, 176, 5, 4}
 };
 
 /* according to VIA Technologies these values are based on experiment */
@@ -713,6 +522,9 @@ static struct via_device_mapping device_mapping[] = {
 	{VIA_LVDS2, "LVDS2"}
 };
 
+/* structure with function pointers to support clock control */
+static struct via_clock clock;
+
 static void load_fix_bit_crtc_reg(void);
 static void __devinit init_gfx_chip_info(int chip_type);
 static void __devinit init_tmds_chip_info(void);
@@ -1634,69 +1446,54 @@ void viafb_load_FIFO_reg(int set_iga, int hor_active, int ver_active)
 
 }
 
-static u32 cle266_encode_pll(struct pll_config pll)
-{
-	return (pll.multiplier << 8)
-		| (pll.rshift << 6)
-		| pll.divisor;
-}
-
-static u32 k800_encode_pll(struct pll_config pll)
-{
-	return ((pll.divisor - 2) << 16)
-		| (pll.rshift << 10)
-		| (pll.multiplier - 2);
-}
-
-static u32 vx855_encode_pll(struct pll_config pll)
-{
-	return (pll.divisor << 16)
-		| (pll.rshift << 10)
-		| pll.multiplier;
-}
-
-static inline u32 get_pll_internal_frequency(u32 ref_freq,
-	struct pll_config pll)
-{
-	return ref_freq / pll.divisor * pll.multiplier;
-}
-
-static inline u32 get_pll_output_frequency(u32 ref_freq, struct pll_config pll)
-{
-	return get_pll_internal_frequency(ref_freq, pll)>>pll.rshift;
-}
-
-static struct pll_config get_pll_config(struct pll_config *config, int size,
+static struct via_pll_config get_pll_config(struct pll_limit *limits, int size,
 	int clk)
 {
-	struct pll_config best = config[0];
+	struct via_pll_config cur, up, down, best = {0, 1, 0};
 	const u32 f0 = 14318180; /* X1 frequency */
-	int i;
-
-	for (i = 1; i < size; i++) {
-		if (abs(get_pll_output_frequency(f0, config[i]) - clk)
-			< abs(get_pll_output_frequency(f0, best) - clk))
-			best = config[i];
+	int i, f;
+
+	for (i = 0; i < size; i++) {
+		cur.rshift = limits[i].rshift;
+		cur.divisor = limits[i].divisor;
+		cur.multiplier = clk / ((f0 / cur.divisor)>>cur.rshift);
+		f = abs(get_pll_output_frequency(f0, cur) - clk);
+		up = down = cur;
+		up.multiplier++;
+		down.multiplier--;
+		if (abs(get_pll_output_frequency(f0, up) - clk) < f)
+			cur = up;
+		else if (abs(get_pll_output_frequency(f0, down) - clk) < f)
+			cur = down;
+
+		if (cur.multiplier < limits[i].multiplier_min)
+			cur.multiplier = limits[i].multiplier_min;
+		else if (cur.multiplier > limits[i].multiplier_max)
+			cur.multiplier = limits[i].multiplier_max;
+
+		f = abs(get_pll_output_frequency(f0, cur) - clk);
+		if (f < abs(get_pll_output_frequency(f0, best) - clk))
+			best = cur;
 	}
 
 	return best;
 }
 
-u32 viafb_get_clk_value(int clk)
+static struct via_pll_config get_best_pll_config(int clk)
 {
-	u32 value = 0;
+	struct via_pll_config config;
 
 	switch (viaparinfo->chip_info->gfx_chip_name) {
 	case UNICHROME_CLE266:
 	case UNICHROME_K400:
-		value = cle266_encode_pll(get_pll_config(cle266_pll_config,
-			ARRAY_SIZE(cle266_pll_config), clk));
+		config = get_pll_config(cle266_pll_limits,
+			ARRAY_SIZE(cle266_pll_limits), clk);
 		break;
 	case UNICHROME_K800:
 	case UNICHROME_PM800:
 	case UNICHROME_CN700:
-		value = k800_encode_pll(get_pll_config(k800_pll_config,
-			ARRAY_SIZE(k800_pll_config), clk));
+		config = get_pll_config(k800_pll_limits,
+			ARRAY_SIZE(k800_pll_limits), clk);
 		break;
 	case UNICHROME_CX700:
 	case UNICHROME_CN750:
@@ -1704,92 +1501,28 @@ u32 viafb_get_clk_value(int clk)
 	case UNICHROME_P4M890:
 	case UNICHROME_P4M900:
 	case UNICHROME_VX800:
-		value = k800_encode_pll(get_pll_config(cx700_pll_config,
-			ARRAY_SIZE(cx700_pll_config), clk));
+		config = get_pll_config(cx700_pll_limits,
+			ARRAY_SIZE(cx700_pll_limits), clk);
 		break;
 	case UNICHROME_VX855:
 	case UNICHROME_VX900:
-		value = vx855_encode_pll(get_pll_config(vx855_pll_config,
-			ARRAY_SIZE(vx855_pll_config), clk));
+		config = get_pll_config(vx855_pll_limits,
+			ARRAY_SIZE(vx855_pll_limits), clk);
 		break;
 	}
 
-	return value;
+	return config;
 }
 
 /* Set VCLK*/
 void viafb_set_vclock(u32 clk, int set_iga)
 {
-	/* H.W. Reset : ON */
-	viafb_write_reg_mask(CR17, VIACR, 0x00, BIT7);
-
-	if (set_iga == IGA1) {
-		/* Change D,N FOR VCLK */
-		switch (viaparinfo->chip_info->gfx_chip_name) {
-		case UNICHROME_CLE266:
-		case UNICHROME_K400:
-			via_write_reg(VIASR, SR46, (clk & 0x00FF));
-			via_write_reg(VIASR, SR47, (clk & 0xFF00) >> 8);
-			break;
-
-		case UNICHROME_K800:
-		case UNICHROME_PM800:
-		case UNICHROME_CN700:
-		case UNICHROME_CX700:
-		case UNICHROME_CN750:
-		case UNICHROME_K8M890:
-		case UNICHROME_P4M890:
-		case UNICHROME_P4M900:
-		case UNICHROME_VX800:
-		case UNICHROME_VX855:
-		case UNICHROME_VX900:
-			via_write_reg(VIASR, SR44, (clk & 0x0000FF));
-			via_write_reg(VIASR, SR45, (clk & 0x00FF00) >> 8);
-			via_write_reg(VIASR, SR46, (clk & 0xFF0000) >> 16);
-			break;
-		}
-	}
-
-	if (set_iga == IGA2) {
-		/* Change D,N FOR LCK */
-		switch (viaparinfo->chip_info->gfx_chip_name) {
-		case UNICHROME_CLE266:
-		case UNICHROME_K400:
-			via_write_reg(VIASR, SR44, (clk & 0x00FF));
-			via_write_reg(VIASR, SR45, (clk & 0xFF00) >> 8);
-			break;
+	struct via_pll_config config = get_best_pll_config(clk);
 
-		case UNICHROME_K800:
-		case UNICHROME_PM800:
-		case UNICHROME_CN700:
-		case UNICHROME_CX700:
-		case UNICHROME_CN750:
-		case UNICHROME_K8M890:
-		case UNICHROME_P4M890:
-		case UNICHROME_P4M900:
-		case UNICHROME_VX800:
-		case UNICHROME_VX855:
-		case UNICHROME_VX900:
-			via_write_reg(VIASR, SR4A, (clk & 0x0000FF));
-			via_write_reg(VIASR, SR4B, (clk & 0x00FF00) >> 8);
-			via_write_reg(VIASR, SR4C, (clk & 0xFF0000) >> 16);
-			break;
-		}
-	}
-
-	/* H.W. Reset : OFF */
-	viafb_write_reg_mask(CR17, VIACR, 0x80, BIT7);
-
-	/* Reset PLL */
-	if (set_iga == IGA1) {
-		viafb_write_reg_mask(SR40, VIASR, 0x02, BIT1);
-		viafb_write_reg_mask(SR40, VIASR, 0x00, BIT1);
-	}
-
-	if (set_iga == IGA2) {
-		viafb_write_reg_mask(SR40, VIASR, 0x04, BIT2);
-		viafb_write_reg_mask(SR40, VIASR, 0x00, BIT2);
-	}
+	if (set_iga == IGA1)
+		clock.set_primary_pll(config);
+	if (set_iga == IGA2)
+		clock.set_secondary_pll(config);
 
 	/* Fire! */
 	via_write_misc_reg_mask(0x0C, 0x0C); /* select external clock */
@@ -2035,7 +1768,7 @@ void viafb_fill_crtc_timing(struct crt_mode_table *crt_table,
 	int i;
 	int index = 0;
 	int h_addr, v_addr;
-	u32 pll_D_N, clock, refresh = viafb_refresh;
+	u32 clock, refresh = viafb_refresh;
 
 	if (viafb_SAMM_ON && set_iga == IGA2)
 		refresh = viafb_refresh1;
@@ -2089,14 +1822,13 @@ void viafb_fill_crtc_timing(struct crt_mode_table *crt_table,
 
 	clock = crt_reg.hor_total * crt_reg.ver_total
 		* crt_table[index].refresh_rate;
-	pll_D_N = viafb_get_clk_value(clock);
-	DEBUG_MSG(KERN_INFO "PLL=%x", pll_D_N);
-	viafb_set_vclock(pll_D_N, set_iga);
+	viafb_set_vclock(clock, set_iga);
 
 }
 
 void __devinit viafb_init_chip_info(int chip_type)
 {
+	via_clock_init(&clock, chip_type);
 	init_gfx_chip_info(chip_type);
 	init_tmds_chip_info();
 	init_lvds_chip_info();
@@ -2584,6 +2316,33 @@ int viafb_setmode(struct VideoModeTable *vmode_tbl, int video_bpp,
 			get_sync(viafbinfo1));
 	}
 
+	clock.set_engine_pll_state(VIA_STATE_ON);
+	clock.set_primary_clock_source(VIA_CLKSRC_X1, true);
+	clock.set_secondary_clock_source(VIA_CLKSRC_X1, true);
+
+#ifdef CONFIG_FB_VIA_X_COMPATIBILITY
+	clock.set_primary_pll_state(VIA_STATE_ON);
+	clock.set_primary_clock_state(VIA_STATE_ON);
+	clock.set_secondary_pll_state(VIA_STATE_ON);
+	clock.set_secondary_clock_state(VIA_STATE_ON);
+#else
+	if (viaparinfo->shared->iga1_devices) {
+		clock.set_primary_pll_state(VIA_STATE_ON);
+		clock.set_primary_clock_state(VIA_STATE_ON);
+	} else {
+		clock.set_primary_pll_state(VIA_STATE_OFF);
+		clock.set_primary_clock_state(VIA_STATE_OFF);
+	}
+
+	if (viaparinfo->shared->iga2_devices) {
+		clock.set_secondary_pll_state(VIA_STATE_ON);
+		clock.set_secondary_clock_state(VIA_STATE_ON);
+	} else {
+		clock.set_secondary_pll_state(VIA_STATE_OFF);
+		clock.set_secondary_clock_state(VIA_STATE_OFF);
+	}
+#endif /*CONFIG_FB_VIA_X_COMPATIBILITY*/
+
 	via_set_state(devices, VIA_STATE_ON);
 	device_screen_on();
 	return 1;

drivers/video/via/hw.h

@@ -732,20 +732,13 @@ struct _lcd_scaling_factor {
 	struct _lcd_ver_scaling_factor lcd_ver_scaling_factor;
 };
 
-struct pll_config {
-	u16 multiplier;
+struct pll_limit {
+	u16 multiplier_min;
+	u16 multiplier_max;
 	u8 divisor;
 	u8 rshift;
 };
 
-struct pll_map {
-	u32 clk;
-	struct pll_config cle266_pll;
-	struct pll_config k800_pll;
-	struct pll_config cx700_pll;
-	struct pll_config vx855_pll;
-};
-
 struct rgbLUT {
 	u8 red;
 	u8 green;
@@ -935,7 +928,6 @@ void viafb_lock_crt(void);
 void viafb_unlock_crt(void);
 void viafb_load_fetch_count_reg(int h_addr, int bpp_byte, int set_iga);
 void viafb_write_regx(struct io_reg RegTable[], int ItemNum);
-u32 viafb_get_clk_value(int clk);
 void viafb_load_FIFO_reg(int set_iga, int hor_active, int ver_active);
 void viafb_set_dpa_gfx(int output_interface, struct GFX_DPA_SETTING\
 					*p_gfx_dpa_setting);

drivers/video/via/lcd.c

@@ -558,7 +558,7 @@ void viafb_lcd_set_mode(struct crt_mode_table *mode_crt_table,
 	int set_vres = plvds_setting_info->v_active;
 	int panel_hres = plvds_setting_info->lcd_panel_hres;
 	int panel_vres = plvds_setting_info->lcd_panel_vres;
-	u32 pll_D_N, clock;
+	u32 clock;
 	struct display_timing mode_crt_reg, panel_crt_reg;
 	struct crt_mode_table *panel_crt_table = NULL;
 	struct VideoModeTable *vmode_tbl = viafb_get_mode(panel_hres,
@@ -609,10 +609,7 @@ void viafb_lcd_set_mode(struct crt_mode_table *mode_crt_table,
 		viafb_load_FIFO_reg(set_iga, set_hres, set_vres);
 
 	fill_lcd_format();
-
-	pll_D_N = viafb_get_clk_value(clock);
-	DEBUG_MSG(KERN_INFO "PLL=0x%x", pll_D_N);
-	viafb_set_vclock(pll_D_N, set_iga);
+	viafb_set_vclock(clock, set_iga);
 	lcd_patch_skew(plvds_setting_info, plvds_chip_info);
 
 	/* If K8M800, enable LCD Prefetch Mode. */

drivers/video/via/via_clock.c

@@ -0,0 +1,349 @@
+/*
+ * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
+ * Copyright 2011 Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+/*
+ * clock and PLL management functions
+ */
+
+#include <linux/kernel.h>
+#include <linux/via-core.h>
+#include "via_clock.h"
+#include "global.h"
+#include "debug.h"
+
+const char *via_slap = "Please slap VIA Technologies to motivate them "
+	"releasing full documentation for your platform!\n";
+
+static inline u32 cle266_encode_pll(struct via_pll_config pll)
+{
+	return (pll.multiplier << 8)
+		| (pll.rshift << 6)
+		| pll.divisor;
+}
+
+static inline u32 k800_encode_pll(struct via_pll_config pll)
+{
+	return ((pll.divisor - 2) << 16)
+		| (pll.rshift << 10)
+		| (pll.multiplier - 2);
+}
+
+static inline u32 vx855_encode_pll(struct via_pll_config pll)
+{
+	return (pll.divisor << 16)
+		| (pll.rshift << 10)
+		| pll.multiplier;
+}
+
+static inline void cle266_set_primary_pll_encoded(u32 data)
+{
+	via_write_reg_mask(VIASR, 0x40, 0x02, 0x02); /* enable reset */
+	via_write_reg(VIASR, 0x46, data & 0xFF);
+	via_write_reg(VIASR, 0x47, (data >> 8) & 0xFF);
+	via_write_reg_mask(VIASR, 0x40, 0x00, 0x02); /* disable reset */
+}
+
+static inline void k800_set_primary_pll_encoded(u32 data)
+{
+	via_write_reg_mask(VIASR, 0x40, 0x02, 0x02); /* enable reset */
+	via_write_reg(VIASR, 0x44, data & 0xFF);
+	via_write_reg(VIASR, 0x45, (data >> 8) & 0xFF);
+	via_write_reg(VIASR, 0x46, (data >> 16) & 0xFF);
+	via_write_reg_mask(VIASR, 0x40, 0x00, 0x02); /* disable reset */
+}
+
+static inline void cle266_set_secondary_pll_encoded(u32 data)
+{
+	via_write_reg_mask(VIASR, 0x40, 0x04, 0x04); /* enable reset */
+	via_write_reg(VIASR, 0x44, data & 0xFF);
+	via_write_reg(VIASR, 0x45, (data >> 8) & 0xFF);
+	via_write_reg_mask(VIASR, 0x40, 0x00, 0x04); /* disable reset */
+}
+
+static inline void k800_set_secondary_pll_encoded(u32 data)
+{
+	via_write_reg_mask(VIASR, 0x40, 0x04, 0x04); /* enable reset */
+	via_write_reg(VIASR, 0x4A, data & 0xFF);
+	via_write_reg(VIASR, 0x4B, (data >> 8) & 0xFF);
+	via_write_reg(VIASR, 0x4C, (data >> 16) & 0xFF);
+	via_write_reg_mask(VIASR, 0x40, 0x00, 0x04); /* disable reset */
+}
+
+static inline void set_engine_pll_encoded(u32 data)
+{
+	via_write_reg_mask(VIASR, 0x40, 0x01, 0x01); /* enable reset */
+	via_write_reg(VIASR, 0x47, data & 0xFF);
+	via_write_reg(VIASR, 0x48, (data >> 8) & 0xFF);
+	via_write_reg(VIASR, 0x49, (data >> 16) & 0xFF);
+	via_write_reg_mask(VIASR, 0x40, 0x00, 0x01); /* disable reset */
+}
+
+static void cle266_set_primary_pll(struct via_pll_config config)
+{
+	cle266_set_primary_pll_encoded(cle266_encode_pll(config));
+}
+
+static void k800_set_primary_pll(struct via_pll_config config)
+{
+	k800_set_primary_pll_encoded(k800_encode_pll(config));
+}
+
+static void vx855_set_primary_pll(struct via_pll_config config)
+{
+	k800_set_primary_pll_encoded(vx855_encode_pll(config));
+}
+
+static void cle266_set_secondary_pll(struct via_pll_config config)
+{
+	cle266_set_secondary_pll_encoded(cle266_encode_pll(config));
+}
+
+static void k800_set_secondary_pll(struct via_pll_config config)
+{
+	k800_set_secondary_pll_encoded(k800_encode_pll(config));
+}
+
+static void vx855_set_secondary_pll(struct via_pll_config config)
+{
+	k800_set_secondary_pll_encoded(vx855_encode_pll(config));
+}
+
+static void k800_set_engine_pll(struct via_pll_config config)
+{
+	set_engine_pll_encoded(k800_encode_pll(config));
+}
+
+static void vx855_set_engine_pll(struct via_pll_config config)
+{
+	set_engine_pll_encoded(vx855_encode_pll(config));
+}
+
+static void set_primary_pll_state(u8 state)
+{
+	u8 value;
+
+	switch (state) {
+	case VIA_STATE_ON:
+		value = 0x20;
+		break;
+	case VIA_STATE_OFF:
+		value = 0x00;
+		break;
+	default:
+		return;
+	}
+
+	via_write_reg_mask(VIASR, 0x2D, value, 0x30);
+}
+
+static void set_secondary_pll_state(u8 state)
+{
+	u8 value;
+
+	switch (state) {
+	case VIA_STATE_ON:
+		value = 0x08;
+		break;
+	case VIA_STATE_OFF:
+		value = 0x00;
+		break;
+	default:
+		return;
+	}
+
+	via_write_reg_mask(VIASR, 0x2D, value, 0x0C);
+}
+
+static void set_engine_pll_state(u8 state)
+{
+	u8 value;
+
+	switch (state) {
+	case VIA_STATE_ON:
+		value = 0x02;
+		break;
+	case VIA_STATE_OFF:
+		value = 0x00;
+		break;
+	default:
+		return;
+	}
+
+	via_write_reg_mask(VIASR, 0x2D, value, 0x03);
+}
+
+static void set_primary_clock_state(u8 state)
+{
+	u8 value;
+
+	switch (state) {
+	case VIA_STATE_ON:
+		value = 0x20;
+		break;
+	case VIA_STATE_OFF:
+		value = 0x00;
+		break;
+	default:
+		return;
+	}
+
+	via_write_reg_mask(VIASR, 0x1B, value, 0x30);
+}
+
+static void set_secondary_clock_state(u8 state)
+{
+	u8 value;
+
+	switch (state) {
+	case VIA_STATE_ON:
+		value = 0x80;
+		break;
+	case VIA_STATE_OFF:
+		value = 0x00;
+		break;
+	default:
+		return;
+	}
+
+	via_write_reg_mask(VIASR, 0x1B, value, 0xC0);
+}
+
+static inline u8 set_clock_source_common(enum via_clksrc source, bool use_pll)
+{
+	u8 data = 0;
+
+	switch (source) {
+	case VIA_CLKSRC_X1:
+		data = 0x00;
+		break;
+	case VIA_CLKSRC_TVX1:
+		data = 0x02;
+		break;
+	case VIA_CLKSRC_TVPLL:
+		data = 0x04; /* 0x06 should be the same */
+		break;
+	case VIA_CLKSRC_DVP1TVCLKR:
+		data = 0x0A;
+		break;
+	case VIA_CLKSRC_CAP0:
+		data = 0xC;
+		break;
+	case VIA_CLKSRC_CAP1:
+		data = 0x0E;
+		break;
+	}
+
+	if (!use_pll)
+		data |= 1;
+
+	return data;
+}
+
+static void set_primary_clock_source(enum via_clksrc source, bool use_pll)
+{
+	u8 data = set_clock_source_common(source, use_pll) << 4;
+	via_write_reg_mask(VIACR, 0x6C, data, 0xF0);
+}
+
+static void set_secondary_clock_source(enum via_clksrc source, bool use_pll)
+{
+	u8 data = set_clock_source_common(source, use_pll);
+	via_write_reg_mask(VIACR, 0x6C, data, 0x0F);
+}
+
+static void dummy_set_clock_state(u8 state)
+{
+	printk(KERN_INFO "Using undocumented set clock state.\n%s", via_slap);
+}
+
+static void dummy_set_clock_source(enum via_clksrc source, bool use_pll)
+{
+	printk(KERN_INFO "Using undocumented set clock source.\n%s", via_slap);
+}
+
+static void dummy_set_pll_state(u8 state)
+{
+	printk(KERN_INFO "Using undocumented set PLL state.\n%s", via_slap);
+}
+
+static void dummy_set_pll(struct via_pll_config config)
+{
+	printk(KERN_INFO "Using undocumented set PLL.\n%s", via_slap);
+}
+
+void via_clock_init(struct via_clock *clock, int gfx_chip)
+{
+	switch (gfx_chip) {
+	case UNICHROME_CLE266:
+	case UNICHROME_K400:
+		clock->set_primary_clock_state = dummy_set_clock_state;
+		clock->set_primary_clock_source = dummy_set_clock_source;
+		clock->set_primary_pll_state = dummy_set_pll_state;
+		clock->set_primary_pll = cle266_set_primary_pll;
+
+		clock->set_secondary_clock_state = dummy_set_clock_state;
+		clock->set_secondary_clock_source = dummy_set_clock_source;
+		clock->set_secondary_pll_state = dummy_set_pll_state;
+		clock->set_secondary_pll = cle266_set_secondary_pll;
+
+		clock->set_engine_pll_state = dummy_set_pll_state;
+		clock->set_engine_pll = dummy_set_pll;
+		break;
+	case UNICHROME_K800:
+	case UNICHROME_PM800:
+	case UNICHROME_CN700:
+	case UNICHROME_CX700:
+	case UNICHROME_CN750:
+	case UNICHROME_K8M890:
+	case UNICHROME_P4M890:
+	case UNICHROME_P4M900:
+	case UNICHROME_VX800:
+		clock->set_primary_clock_state = set_primary_clock_state;
+		clock->set_primary_clock_source = set_primary_clock_source;
+		clock->set_primary_pll_state = set_primary_pll_state;
+		clock->set_primary_pll = k800_set_primary_pll;
+
+		clock->set_secondary_clock_state = set_secondary_clock_state;
+		clock->set_secondary_clock_source = set_secondary_clock_source;
+		clock->set_secondary_pll_state = set_secondary_pll_state;
+		clock->set_secondary_pll = k800_set_secondary_pll;
+
+		clock->set_engine_pll_state = set_engine_pll_state;
+		clock->set_engine_pll = k800_set_engine_pll;
+		break;
+	case UNICHROME_VX855:
+	case UNICHROME_VX900:
+		clock->set_primary_clock_state = set_primary_clock_state;
+		clock->set_primary_clock_source = set_primary_clock_source;
+		clock->set_primary_pll_state = set_primary_pll_state;
+		clock->set_primary_pll = vx855_set_primary_pll;
+
+		clock->set_secondary_clock_state = set_secondary_clock_state;
+		clock->set_secondary_clock_source = set_secondary_clock_source;
+		clock->set_secondary_pll_state = set_secondary_pll_state;
+		clock->set_secondary_pll = vx855_set_secondary_pll;
+
+		clock->set_engine_pll_state = set_engine_pll_state;
+		clock->set_engine_pll = vx855_set_engine_pll;
+		break;
+
+	}
+}

drivers/video/via/via_clock.h

@@ -0,0 +1,76 @@
+/*
+ * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
+ * Copyright 2011 Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+/*
+ * clock and PLL management functions
+ */
+
+#ifndef __VIA_CLOCK_H__
+#define __VIA_CLOCK_H__
+
+#include <linux/types.h>
+
+enum via_clksrc {
+	VIA_CLKSRC_X1 = 0,
+	VIA_CLKSRC_TVX1,
+	VIA_CLKSRC_TVPLL,
+	VIA_CLKSRC_DVP1TVCLKR,
+	VIA_CLKSRC_CAP0,
+	VIA_CLKSRC_CAP1,
+};
+
+struct via_pll_config {
+	u16 multiplier;
+	u8 divisor;
+	u8 rshift;
+};
+
+struct via_clock {
+	void (*set_primary_clock_state)(u8 state);
+	void (*set_primary_clock_source)(enum via_clksrc src, bool use_pll);
+	void (*set_primary_pll_state)(u8 state);
+	void (*set_primary_pll)(struct via_pll_config config);
+
+	void (*set_secondary_clock_state)(u8 state);
+	void (*set_secondary_clock_source)(enum via_clksrc src, bool use_pll);
+	void (*set_secondary_pll_state)(u8 state);
+	void (*set_secondary_pll)(struct via_pll_config config);
+
+	void (*set_engine_pll_state)(u8 state);
+	void (*set_engine_pll)(struct via_pll_config config);
+};
+
+
+static inline u32 get_pll_internal_frequency(u32 ref_freq,
+	struct via_pll_config pll)
+{
+	return ref_freq / pll.divisor * pll.multiplier;
+}
+
+static inline u32 get_pll_output_frequency(u32 ref_freq,
+	struct via_pll_config pll)
+{
+	return get_pll_internal_frequency(ref_freq, pll) >> pll.rshift;
+}
+
+void via_clock_init(struct via_clock *clock, int gfx_chip);
+
+#endif /* __VIA_CLOCK_H__ */

drivers/video/via/viamode.c

@@ -37,7 +37,6 @@ struct io_reg CN400_ModeXregs[] = { {VIASR, SR10, 0xFF, 0x01},
 {VIACR, CR69, 0xFF, 0x00},
 {VIACR, CR6A, 0xFF, 0x40},
 {VIACR, CR6B, 0xFF, 0x00},
-{VIACR, CR6C, 0xFF, 0x00},
 {VIACR, CR88, 0xFF, 0x40},	/* LCD Panel Type                      */
 {VIACR, CR89, 0xFF, 0x00},	/* LCD Timing Control 0                */
 {VIACR, CR8A, 0xFF, 0x88},	/* LCD Timing Control 1                */
@@ -83,7 +82,6 @@ struct io_reg CN700_ModeXregs[] = { {VIASR, SR10, 0xFF, 0x01},
 {VIACR, CR69, 0xFF, 0x00},
 {VIACR, CR6A, 0xFD, 0x40},
 {VIACR, CR6B, 0xFF, 0x00},
-{VIACR, CR6C, 0xFF, 0x00},
 {VIACR, CR77, 0xFF, 0x00},	/* LCD scaling Factor */
 {VIACR, CR78, 0xFF, 0x00},	/* LCD scaling Factor */
 {VIACR, CR79, 0xFF, 0x00},	/* LCD scaling Factor */
@@ -153,7 +151,7 @@ struct io_reg CX700_ModeXregs[] = { {VIASR, SR10, 0xFF, 0x01},
 {VIASR, SR1B, 0xFF, 0xF0},
 {VIASR, SR1E, 0xFF, 0x01},
 {VIASR, SR2A, 0xFF, 0x00},
-{VIASR, SR2D, 0xFF, 0xFF},	/* VCK and LCK PLL power on.           */
+{VIASR, SR2D, 0xC0, 0xC0},	/* delayed E3_ECK */
 {VIACR, CR32, 0xFF, 0x00},
 {VIACR, CR33, 0xFF, 0x00},
 {VIACR, CR35, 0xFF, 0x00},
@@ -162,7 +160,6 @@ struct io_reg CX700_ModeXregs[] = { {VIASR, SR10, 0xFF, 0x01},
 {VIACR, CR69, 0xFF, 0x00},
 {VIACR, CR6A, 0xFF, 0x40},
 {VIACR, CR6B, 0xFF, 0x00},
-{VIACR, CR6C, 0xFF, 0x00},
 {VIACR, CR88, 0xFF, 0x40},	/* LCD Panel Type                      */
 {VIACR, CR89, 0xFF, 0x00},	/* LCD Timing Control 0                */
 {VIACR, CR8A, 0xFF, 0x88},	/* LCD Timing Control 1                */
@@ -192,7 +189,7 @@ struct io_reg VX855_ModeXregs[] = {
 {VIASR, SR2A, 0xF0, 0x00},
 {VIASR, SR58, 0xFF, 0x00},
 {VIASR, SR59, 0xFF, 0x00},
-{VIASR, SR2D, 0xFF, 0xFF},	/* VCK and LCK PLL power on.           */
+{VIASR, SR2D, 0xC0, 0xC0},	/* delayed E3_ECK */
 {VIACR, CR32, 0xFF, 0x00},
 {VIACR, CR33, 0x7F, 0x00},
 {VIACR, CR35, 0xFF, 0x00},
@@ -200,7 +197,6 @@ struct io_reg VX855_ModeXregs[] = {
 {VIACR, CR69, 0xFF, 0x00},
 {VIACR, CR6A, 0xFD, 0x60},
 {VIACR, CR6B, 0xFF, 0x00},
-{VIACR, CR6C, 0xFF, 0x00},
 {VIACR, CR88, 0xFF, 0x40},          /* LCD Panel Type                      */
 {VIACR, CR89, 0xFF, 0x00},          /* LCD Timing Control 0                */
 {VIACR, CR8A, 0xFF, 0x88},          /* LCD Timing Control 1                */