staging: brcm80211: remove BCMLXSDMMC macro definition

The conditional code depending on BCMLXSDMMC macro definition is
always compiled into the fullmac driver.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/brcm80211/brcmfmac/Makefile

@@ -16,7 +16,6 @@
 # CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 
 ccflags-y :=			\
-	-DBCMLXSDMMC		\
 	-DBCMPLATFORM_BUS	\
 	-DBCMSDIO		\
 	-DBRCM_FULLMAC		\

drivers/staging/brcm80211/brcmfmac/bcmsdh_linux.c

@@ -121,7 +121,6 @@ bool brcmf_sdio_chipmatch(u16 vendor, u16 device)
 }
 
 #if defined(BCMPLATFORM_BUS)
-#if defined(BCMLXSDMMC)
 /* forward declarations */
 int brcmf_sdio_probe(struct device *dev);
 EXPORT_SYMBOL(brcmf_sdio_probe);
@@ -129,36 +128,15 @@ EXPORT_SYMBOL(brcmf_sdio_probe);
 int brcmf_sdio_remove(struct device *dev);
 EXPORT_SYMBOL(brcmf_sdio_remove);
 
-#else
-/* forward declarations */
-static int __devinit brcmf_sdio_probe(struct device *dev);
-static int __devexit brcmf_sdio_remove(struct device *dev);
-#endif				/* BCMLXSDMMC */
-
-#ifndef BCMLXSDMMC
-static
-#endif				/* BCMLXSDMMC */
 int brcmf_sdio_probe(struct device *dev)
 {
 	struct bcmsdh_hc *sdhc = NULL;
 	unsigned long regs = 0;
 	struct brcmf_sdio *sdh = NULL;
-#if !defined(BCMLXSDMMC) && defined(BCMPLATFORM_BUS)
-	struct platform_device *pdev;
-	struct resource *r;
-#endif				/* BCMLXSDMMC */
 	int irq = 0;
 	u32 vendevid;
 	unsigned long irq_flags = 0;
 
-#if !defined(BCMLXSDMMC) && defined(BCMPLATFORM_BUS)
-	pdev = to_platform_device(dev);
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	irq = platform_get_irq(pdev, 0);
-	if (!r || irq == NO_IRQ)
-		return -ENXIO;
-#endif				/* BCMLXSDMMC */
-
 #if defined(OOB_INTR_ONLY)
 #ifdef HW_OOB
 	irq_flags =
@@ -181,19 +159,12 @@ int brcmf_sdio_probe(struct device *dev)
 	}
 	sdhc->dev = (void *)dev;
 
-#ifdef BCMLXSDMMC
 	sdh = brcmf_sdcard_attach((void *)0, (void **)&regs, irq);
 	if (!sdh) {
 		SDLX_MSG(("%s: bcmsdh_attach failed\n", __func__));
 		goto err;
 	}
-#else
-	sdh = brcmf_sdcard_attach((void *)r->start, (void **)&regs, irq);
-	if (!sdh) {
-		SDLX_MSG(("%s: bcmsdh_attach failed\n", __func__));
-		goto err;
-	}
-#endif				/* BCMLXSDMMC */
+
 	sdhc->sdh = sdh;
 	sdhc->oob_irq = irq;
 	sdhc->oob_flags = irq_flags;
@@ -229,9 +200,6 @@ err:
 	return -ENODEV;
 }
 
-#ifndef BCMLXSDMMC
-static
-#endif				/* BCMLXSDMMC */
 int brcmf_sdio_remove(struct device *dev)
 {
 	struct bcmsdh_hc *sdhc, *prev;
@@ -258,11 +226,6 @@ int brcmf_sdio_remove(struct device *dev)
 
 	/* release SDIO Host Controller info */
 	kfree(sdhc);
-
-#if !defined(BCMLXSDMMC)
-	dev_set_drvdata(dev, NULL);
-#endif				/* !defined(BCMLXSDMMC) */
-
 	return 0;
 }
 #endif				/* BCMPLATFORM_BUS */

drivers/staging/brcm80211/brcmfmac/dhd_custom_gpio.c

@@ -38,9 +38,7 @@ int wifi_get_irq_number(unsigned long *irq_flags_ptr);
 
 #if defined(OOB_INTR_ONLY)
 
-#if defined(BCMLXSDMMC)
 extern int sdioh_mmc_irq(int irq);
-#endif				/* (BCMLXSDMMC)  */
 
 #ifdef CUSTOMER_HW3
 #include <mach/gpio.h>

drivers/staging/brcm80211/brcmfmac/dhd_sdio.c

@@ -923,14 +923,7 @@ static int brcmf_sdbrcm_htclk(dhd_bus_t *bus, bool on, bool pendok)
 		DHD_INFO(("CLKCTL: turned ON\n"));
 
 #if defined(DHD_DEBUG)
-		if (bus->alp_only == true) {
-#if !defined(BCMLXSDMMC)
-			if (!SBSDIO_ALPONLY(clkctl)) {
-				DHD_ERROR(("%s: HT Clock, when ALP Only\n",
-					   __func__));
-			}
-#endif				/* !defined(BCMLXSDMMC) */
-		} else {
+		if (bus->alp_only != true) {
 			if (SBSDIO_ALPONLY(clkctl)) {
 				DHD_ERROR(("%s: HT Clock should be on.\n",
 					   __func__));