pata_sis: add mode_filter method for certain sis5513 chipsets

This mirrors a very old commit (3160d5416f39da9d9, "sis5513: add
->udma_filter method for chipset_family >= ATA_133") to the old sis5513
IDE driver that prevents certain setups from working.

UDMA6 (ATA/133) is not supported on some chipsets and we need to ensure
this mode is not chosen even if a connected drive supports it. Port this
old patch forward to the new PATA driver to ensure UDMA5 is the highest
mode used if that is what is supported.

Kernel bugzilla #41582.

Reviewed-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

drivers/ata/pata_sis.c

@@ -509,6 +509,27 @@ static void sis_133_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 	pci_write_config_dword(pdev, port, t1);
 }
 
+/**
+ *	sis_133_mode_filter - mode selection filter
+ *	@adev: ATA device
+ *
+ *	Block UDMA6 on devices that do not support it.
+ */
+
+static unsigned long sis_133_mode_filter(struct ata_device *adev, unsigned long mask)
+{
+	struct ata_port *ap = adev->link->ap;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	int port = sis_port_base(adev);
+	u32 t1;
+
+	pci_read_config_dword(pdev, port, &t1);
+	/* if ATA133 is disabled, mask it out */
+	if (!(t1 & 0x08))
+		mask &= ~(0xC0 << ATA_SHIFT_UDMA);
+	return mask;
+}
+
 static struct scsi_host_template sis_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
@@ -530,6 +551,7 @@ static struct ata_port_operations sis_133_ops = {
 	.set_piomode		= sis_133_set_piomode,
 	.set_dmamode		= sis_133_set_dmamode,
 	.cable_detect		= sis_133_cable_detect,
+	.mode_filter		= sis_133_mode_filter,
 };
 
 static struct ata_port_operations sis_133_early_ops = {
@@ -779,10 +801,13 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 
 		switch(trueid) {
 		case 0x5518:	/* SIS 962/963 */
+			dev_info(&pdev->dev,
+				 "SiS 962/963 MuTIOL IDE UDMA133 controller\n");
 			chipset = &sis133;
 			if ((idemisc & 0x40000000) == 0) {
 				pci_write_config_dword(pdev, 0x54, idemisc | 0x40000000);
-				printk(KERN_INFO "SIS5513: Switching to 5513 register mapping\n");
+				dev_info(&pdev->dev,
+					 "Switching to 5513 register mapping\n");
 			}
 			break;
 		case 0x0180:	/* SIS 965/965L */