Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Documentation/Changes

@@ -45,6 +45,7 @@ o  nfs-utils              1.0.5                   # showmount --version
 o  procps                 3.2.0                   # ps --version
 o  oprofile               0.9                     # oprofiled --version
 o  udev                   081                     # udevinfo -V
+o  grub                   0.93                    # grub --version
 
 Kernel compilation
 ==================

MAINTAINERS

@@ -3754,7 +3754,7 @@ L:	linux-usb-devel@lists.sourceforge.net
 W:	http://www.linux-usb.org/gadget
 S:	Maintained
 
-USB HID/HIDBP DRIVERS
+USB HID/HIDBP DRIVERS (USB KEYBOARDS, MICE, REMOTE CONTROLS, ...)
 P:	Jiri Kosina
 M:	jkosina@suse.cz
 L:	linux-usb-devel@lists.sourceforge.net

arch/frv/mb93090-mb00/pci-vdk.c

@@ -400,7 +400,8 @@ int __init pcibios_init(void)
 	__reg_MB86943_pci_sl_mem_base	= __region_CS2 + 0x08000000;
 	mb();
 
-	*(volatile unsigned long *)(__region_CS2+0x01300014) == 1;
+	/* enable PCI arbitration */
+	__reg_MB86943_pci_arbiter	= MB86943_PCIARB_EN;
 
 	ioport_resource.start	= (__reg_MB86943_sl_pci_io_base << 9) & 0xfffffc00;
 	ioport_resource.end	= (__reg_MB86943_sl_pci_io_range << 9) | 0x3ff;

arch/i386/boot/edd.c

@@ -127,7 +127,7 @@ static int get_edd_info(u8 devno, struct edd_info *ei)
 	ax = 0x4800;
 	dx = devno;
 	asm("pushfl; int $0x13; popfl"
-	    : "+a" (ax), "+d" (dx)
+	    : "+a" (ax), "+d" (dx), "=m" (ei->params)
 	    : "S" (&ei->params)
 	    : "ebx", "ecx", "edi");
 

arch/i386/boot/video-vesa.c

@@ -268,7 +268,7 @@ void vesa_store_edid(void)
 	dx = 0;			/* EDID block number */
 	di =(size_t) &boot_params.edid_info; /* (ES:)Pointer to block */
 	asm(INT10
-	    : "+a" (ax), "+b" (bx), "+d" (dx)
+	    : "+a" (ax), "+b" (bx), "+d" (dx), "=m" (boot_params.edid_info)
 	    : "c" (cx), "D" (di)
 	    : "esi");
 #endif /* CONFIG_FIRMWARE_EDID */

arch/ia64/ia32/sys_ia32.c

@@ -34,7 +34,6 @@
 #include <linux/uio.h>
 #include <linux/nfs_fs.h>
 #include <linux/quota.h>
-#include <linux/syscalls.h>
 #include <linux/sunrpc/svc.h>
 #include <linux/nfsd/nfsd.h>
 #include <linux/nfsd/cache.h>

arch/ia64/kernel/iosapic.c

@@ -142,7 +142,7 @@ struct iosapic_rte_info {
 static struct iosapic_intr_info {
 	struct list_head rtes;		/* RTEs using this vector (empty =>
 					 * not an IOSAPIC interrupt) */
-	int		count;		/* # of RTEs that shares this vector */
+	int		count;		/* # of registered RTEs */
 	u32		low32;		/* current value of low word of
 					 * Redirection table entry */
 	unsigned int	dest;		/* destination CPU physical ID */
@@ -313,7 +313,7 @@ mask_irq (unsigned int irq)
 	int rte_index;
 	struct iosapic_rte_info *rte;
 
-	if (list_empty(&iosapic_intr_info[irq].rtes))
+	if (!iosapic_intr_info[irq].count)
 		return;			/* not an IOSAPIC interrupt! */
 
 	/* set only the mask bit */
@@ -331,7 +331,7 @@ unmask_irq (unsigned int irq)
 	int rte_index;
 	struct iosapic_rte_info *rte;
 
-	if (list_empty(&iosapic_intr_info[irq].rtes))
+	if (!iosapic_intr_info[irq].count)
 		return;			/* not an IOSAPIC interrupt! */
 
 	low32 = iosapic_intr_info[irq].low32 &= ~IOSAPIC_MASK;
@@ -363,7 +363,7 @@ iosapic_set_affinity (unsigned int irq, cpumask_t mask)
 
 	dest = cpu_physical_id(first_cpu(mask));
 
-	if (list_empty(&iosapic_intr_info[irq].rtes))
+	if (!iosapic_intr_info[irq].count)
 		return;			/* not an IOSAPIC interrupt */
 
 	set_irq_affinity_info(irq, dest, redir);
@@ -542,7 +542,7 @@ iosapic_reassign_vector (int irq)
 {
 	int new_irq;
 
-	if (!list_empty(&iosapic_intr_info[irq].rtes)) {
+	if (iosapic_intr_info[irq].count) {
 		new_irq = create_irq();
 		if (new_irq < 0)
 			panic("%s: out of interrupt vectors!\n", __FUNCTION__);
@@ -560,7 +560,7 @@ iosapic_reassign_vector (int irq)
 	}
 }
 
-static struct iosapic_rte_info *iosapic_alloc_rte (void)
+static struct iosapic_rte_info * __init_refok iosapic_alloc_rte (void)
 {
 	int i;
 	struct iosapic_rte_info *rte;
@@ -677,7 +677,7 @@ get_target_cpu (unsigned int gsi, int irq)
 	 * In case of vector shared by multiple RTEs, all RTEs that
 	 * share the vector need to use the same destination CPU.
 	 */
-	if (!list_empty(&iosapic_intr_info[irq].rtes))
+	if (iosapic_intr_info[irq].count)
 		return iosapic_intr_info[irq].dest;
 
 	/*
@@ -794,8 +794,9 @@ iosapic_register_intr (unsigned int gsi,
 	err = register_intr(gsi, irq, IOSAPIC_LOWEST_PRIORITY,
 			    polarity, trigger);
 	if (err < 0) {
+		spin_unlock(&irq_desc[irq].lock);
 		irq = err;
-		goto unlock_all;
+		goto unlock_iosapic_lock;
 	}
 
 	/*
@@ -811,7 +812,7 @@ iosapic_register_intr (unsigned int gsi,
 	       gsi, (trigger == IOSAPIC_EDGE ? "edge" : "level"),
 	       (polarity == IOSAPIC_POL_HIGH ? "high" : "low"),
 	       cpu_logical_id(dest), dest, irq_to_vector(irq));
- unlock_all:
+
 	spin_unlock(&irq_desc[irq].lock);
  unlock_iosapic_lock:
 	spin_unlock_irqrestore(&iosapic_lock, flags);

arch/ia64/kernel/irq_ia64.c

@@ -101,15 +101,6 @@ int check_irq_used(int irq)
 	return -1;
 }
 
-static void reserve_irq(unsigned int irq)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&vector_lock, flags);
-	irq_status[irq] = IRQ_RSVD;
-	spin_unlock_irqrestore(&vector_lock, flags);
-}
-
 static inline int find_unassigned_irq(void)
 {
 	int irq;
@@ -302,10 +293,14 @@ static cpumask_t vector_allocation_domain(int cpu)
 
 void destroy_and_reserve_irq(unsigned int irq)
 {
+	unsigned long flags;
+
 	dynamic_irq_cleanup(irq);
 
-	clear_irq_vector(irq);
-	reserve_irq(irq);
+	spin_lock_irqsave(&vector_lock, flags);
+	__clear_irq_vector(irq);
+	irq_status[irq] = IRQ_RSVD;
+	spin_unlock_irqrestore(&vector_lock, flags);
 }
 
 static int __reassign_irq_vector(int irq, int cpu)

arch/ia64/kernel/mca.c

@@ -1750,8 +1750,17 @@ format_mca_init_stack(void *mca_data, unsigned long offset,
 	strncpy(p->comm, type, sizeof(p->comm)-1);
 }
 
-/* Do per-CPU MCA-related initialization.  */
+/* Caller prevents this from being called after init */
+static void * __init_refok mca_bootmem(void)
+{
+	void *p;
 
+	p = alloc_bootmem(sizeof(struct ia64_mca_cpu) * NR_CPUS +
+	                  KERNEL_STACK_SIZE);
+	return (void *)ALIGN((unsigned long)p, KERNEL_STACK_SIZE);
+}
+
+/* Do per-CPU MCA-related initialization.  */
 void __cpuinit
 ia64_mca_cpu_init(void *cpu_data)
 {
@@ -1763,11 +1772,7 @@ ia64_mca_cpu_init(void *cpu_data)
 		int cpu;
 
 		first_time = 0;
-		mca_data = alloc_bootmem(sizeof(struct ia64_mca_cpu)
-					 * NR_CPUS + KERNEL_STACK_SIZE);
-		mca_data = (void *)(((unsigned long)mca_data +
-					KERNEL_STACK_SIZE - 1) &
-				(-KERNEL_STACK_SIZE));
+		mca_data = mca_bootmem();
 		for (cpu = 0; cpu < NR_CPUS; cpu++) {
 			format_mca_init_stack(mca_data,
 					offsetof(struct ia64_mca_cpu, mca_stack),

arch/ia64/kernel/setup.c

@@ -60,7 +60,6 @@
 #include <asm/smp.h>
 #include <asm/system.h>
 #include <asm/unistd.h>
-#include <asm/system.h>
 
 #if defined(CONFIG_SMP) && (IA64_CPU_SIZE > PAGE_SIZE)
 # error "struct cpuinfo_ia64 too big!"

arch/ia64/kernel/smp.c

@@ -346,7 +346,7 @@ smp_flush_tlb_mm (struct mm_struct *mm)
 }
 
 /*
- * Run a function on another CPU
+ * Run a function on a specific CPU
  *  <func>	The function to run. This must be fast and non-blocking.
  *  <info>	An arbitrary pointer to pass to the function.
  *  <nonatomic>	Currently unused.
@@ -366,9 +366,11 @@ smp_call_function_single (int cpuid, void (*func) (void *info), void *info, int
 	int me = get_cpu(); /* prevent preemption and reschedule on another processor */
 
 	if (cpuid == me) {
-		printk(KERN_INFO "%s: trying to call self\n", __FUNCTION__);
+		local_irq_disable();
+		func(info);
+		local_irq_enable();
 		put_cpu();
-		return -EBUSY;
+		return 0;
 	}
 
 	data.func = func;

arch/ia64/kernel/time.c

@@ -240,7 +240,21 @@ ia64_init_itm (void)
 		if (!nojitter)
 			itc_jitter_data.itc_jitter = 1;
 #endif
-	}
+	} else
+		/*
+		 * ITC is drifty and we have not synchronized the ITCs in smpboot.c.
+		 * ITC values may fluctuate significantly between processors.
+		 * Clock should not be used for hrtimers. Mark itc as only
+		 * useful for boot and testing.
+		 *
+		 * Note that jitter compensation is off! There is no point of
+		 * synchronizing ITCs since they may be large differentials
+		 * that change over time.
+		 *
+		 * The only way to fix this would be to repeatedly sync the
+		 * ITCs. Until that time we have to avoid ITC.
+		 */
+		clocksource_itc.rating = 50;
 
 	/* Setup the CPU local timer tick */
 	ia64_cpu_local_tick();

arch/ia64/sn/kernel/io_common.c

@@ -391,7 +391,7 @@ void sn_bus_free_sysdata(void)
  * hubdev_init_node() - Creates the HUB data structure and link them to it's
  *			own NODE specific data area.
  */
-void hubdev_init_node(nodepda_t * npda, cnodeid_t node)
+void __init hubdev_init_node(nodepda_t * npda, cnodeid_t node)
 {
 	struct hubdev_info *hubdev_info;
 	int size;

arch/ia64/sn/kernel/setup.c

@@ -25,7 +25,6 @@
 #include <linux/interrupt.h>
 #include <linux/acpi.h>
 #include <linux/compiler.h>
-#include <linux/sched.h>
 #include <linux/root_dev.h>
 #include <linux/nodemask.h>
 #include <linux/pm.h>

arch/ia64/sn/kernel/sn2/timer.c

@@ -23,16 +23,14 @@
 
 extern unsigned long sn_rtc_cycles_per_second;
 
-static void __iomem *sn2_mc;
-
 static cycle_t read_sn2(void)
 {
-	return (cycle_t)readq(sn2_mc);
+	return (cycle_t)readq(RTC_COUNTER_ADDR);
 }
 
 static struct clocksource clocksource_sn2 = {
         .name           = "sn2_rtc",
-        .rating         = 300,
+        .rating         = 450,
         .read           = read_sn2,
         .mask           = (1LL << 55) - 1,
         .mult           = 0,
@@ -58,7 +56,6 @@ ia64_sn_udelay (unsigned long usecs)
 
 void __init sn_timer_init(void)
 {
-	sn2_mc = RTC_COUNTER_ADDR;
 	clocksource_sn2.fsys_mmio = RTC_COUNTER_ADDR;
 	clocksource_sn2.mult = clocksource_hz2mult(sn_rtc_cycles_per_second,
 							clocksource_sn2.shift);

drivers/ata/ata_piix.c

@@ -890,37 +890,46 @@ static void ich_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 }
 
 #ifdef CONFIG_PM
-static struct dmi_system_id piix_broken_suspend_dmi_table[] = {
-	{
-		.ident = "TECRA M5",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M5"),
-		},
-	},
-	{
-		.ident = "Satellite U200",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U200"),
+static int piix_broken_suspend(void)
+{
+	static struct dmi_system_id sysids[] = {
+		{
+			.ident = "TECRA M5",
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+				DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M5"),
+			},
 		},
-	},
-	{
-		.ident = "Satellite U205",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U205"),
+		{
+			.ident = "Satellite U205",
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+				DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U205"),
+			},
 		},
-	},
-	{
-		.ident = "Portege M500",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE M500"),
+		{
+			.ident = "Portege M500",
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+				DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE M500"),
+			},
 		},
-	},
-	{ }
-};
+		{ }
+	};
+	static const char *oemstrs[] = {
+		"Tecra M3,",
+	};
+	int i;
+
+	if (dmi_check_system(sysids))
+		return 1;
+
+	for (i = 0; i < ARRAY_SIZE(oemstrs); i++)
+		if (dmi_find_device(DMI_DEV_TYPE_OEM_STRING, oemstrs[i], NULL))
+			return 1;
+
+	return 0;
+}
 
 static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
 {
@@ -937,8 +946,7 @@ static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
 	 * cycles and power trying to do something to the sleeping
 	 * beauty.
 	 */
-	if (dmi_check_system(piix_broken_suspend_dmi_table) &&
-	    mesg.event == PM_EVENT_SUSPEND) {
+	if (piix_broken_suspend() && mesg.event == PM_EVENT_SUSPEND) {
 		pci_save_state(pdev);
 
 		/* mark its power state as "unknown", since we don't
@@ -973,10 +981,10 @@ static int piix_pci_device_resume(struct pci_dev *pdev)
 		pci_restore_state(pdev);
 
 		/* PCI device wasn't disabled during suspend.  Use
-		 * __pci_reenable_device() to avoid affecting the
-		 * enable count.
+		 * pci_reenable_device() to avoid affecting the enable
+		 * count.
 		 */
-		rc = __pci_reenable_device(pdev);
+		rc = pci_reenable_device(pdev);
 		if (rc)
 			dev_printk(KERN_ERR, &pdev->dev, "failed to enable "
 				   "device after resume (%d)\n", rc);

drivers/ata/libata-core.c

@@ -3788,6 +3788,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "WDC WD740ADFD-00NLR1", NULL,		ATA_HORKAGE_NONCQ, },
 	{ "FUJITSU MHV2080BH",	"00840028",	ATA_HORKAGE_NONCQ, },
 	{ "ST9160821AS",	"3.CLF",	ATA_HORKAGE_NONCQ, },
+	{ "SAMSUNG HD401LJ",	"ZZ100-15",	ATA_HORKAGE_NONCQ, },
 
 	/* Devices with NCQ limits */
 

drivers/ata/libata-sff.c

@@ -573,6 +573,10 @@ int ata_pci_init_bmdma(struct ata_host *host)
 	struct pci_dev *pdev = to_pci_dev(gdev);
 	int i, rc;
 
+	/* No BAR4 allocation: No DMA */
+	if (pci_resource_start(pdev, 4) == 0)
+		return 0;
+
 	/* TODO: If we get no DMA mask we should fall back to PIO */
 	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
 	if (rc)

drivers/ata/pata_cmd64x.c

@@ -31,7 +31,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_cmd64x"
-#define DRV_VERSION "0.2.3"
+#define DRV_VERSION "0.2.4"
 
 /*
  * CMD64x specific registers definition.
@@ -397,7 +397,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
-			.udma_mask = ATA_UDMA1,
+			.udma_mask = ATA_UDMA2,
 			.port_ops = &cmd64x_port_ops
 		},
 		{	/* CMD 646 rev 1  */
@@ -412,7 +412,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
-			.udma_mask = ATA_UDMA2,
+			.udma_mask = ATA_UDMA4,
 			.port_ops = &cmd648_port_ops
 		},
 		{	/* CMD 649 */
@@ -420,7 +420,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 			.flags = ATA_FLAG_SLAVE_POSS,
 			.pio_mask = 0x1f,
 			.mwdma_mask = 0x07,
-			.udma_mask = ATA_UDMA3,
+			.udma_mask = ATA_UDMA5,
 			.port_ops = &cmd648_port_ops
 		}
 	};

drivers/ata/pata_sis.c

@@ -2,6 +2,7 @@
  *    pata_sis.c - SiS ATA driver
  *
  *	(C) 2005 Red Hat <alan@redhat.com>
+ *	(C) 2007 Bartlomiej Zolnierkiewicz
  *
  *    Based upon linux/drivers/ide/pci/sis5513.c
  * Copyright (C) 1999-2000	Andre Hedrick <andre@linux-ide.org>
@@ -35,7 +36,7 @@
 #include "sis.h"
 
 #define DRV_NAME	"pata_sis"
-#define DRV_VERSION	"0.5.1"
+#define DRV_VERSION	"0.5.2"
 
 struct sis_chipset {
 	u16 device;				/* PCI host ID */
@@ -237,7 +238,7 @@ static void sis_old_set_piomode (struct ata_port *ap, struct ata_device *adev)
 }
 
 /**
- *	sis_100_set_pioode - Initialize host controller PATA PIO timings
+ *	sis_100_set_piomode - Initialize host controller PATA PIO timings
  *	@ap: Port whose timings we are configuring
  *	@adev: Device we are configuring for.
  *
@@ -262,7 +263,7 @@ static void sis_100_set_piomode (struct ata_port *ap, struct ata_device *adev)
 }
 
 /**
- *	sis_133_set_pioode - Initialize host controller PATA PIO timings
+ *	sis_133_set_piomode - Initialize host controller PATA PIO timings
  *	@ap: Port whose timings we are configuring
  *	@adev: Device we are configuring for.
  *
@@ -334,7 +335,7 @@ static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 	int drive_pci = sis_old_port_base(adev);
 	u16 timing;
 
-	const u16 mwdma_bits[] = { 0x707, 0x202, 0x202 };
+	const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 };
 	const u16 udma_bits[]  = { 0xE000, 0xC000, 0xA000 };
 
 	pci_read_config_word(pdev, drive_pci, &timing);
@@ -342,15 +343,15 @@ static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 	if (adev->dma_mode < XFER_UDMA_0) {
 		/* bits 3-0 hold recovery timing bits 8-10 active timing and
 		   the higer bits are dependant on the device */
-		timing &= ~ 0x870F;
+		timing &= ~0x870F;
 		timing |= mwdma_bits[speed];
-		pci_write_config_word(pdev, drive_pci, timing);
 	} else {
 		/* Bit 15 is UDMA on/off, bit 13-14 are cycle time */
 		speed = adev->dma_mode - XFER_UDMA_0;
 		timing &= ~0x6000;
 		timing |= udma_bits[speed];
 	}
+	pci_write_config_word(pdev, drive_pci, timing);
 }
 
 /**
@@ -373,7 +374,7 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 	int drive_pci = sis_old_port_base(adev);
 	u16 timing;
 
-	const u16 mwdma_bits[] = { 0x707, 0x202, 0x202 };
+	const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 };
 	const u16 udma_bits[]  = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000};
 
 	pci_read_config_word(pdev, drive_pci, &timing);
@@ -432,8 +433,7 @@ static void sis_100_set_dmamode (struct ata_port *ap, struct ata_device *adev)
  *	@adev: Device to program
  *
  *	Set UDMA/MWDMA mode for device, in host controller PCI config space.
- *	Handles early SiS 961 bridges. Supports MWDMA as well unlike
- *	the old ide/pci driver.
+ *	Handles early SiS 961 bridges.
  *
  *	LOCKING:
  *	None (inherited from caller).
@@ -467,8 +467,6 @@ static void sis_133_early_set_dmamode (struct ata_port *ap, struct ata_device *a
  *	@adev: Device to program
  *
  *	Set UDMA/MWDMA mode for device, in host controller PCI config space.
- *	Handles early SiS 961 bridges. Supports MWDMA as well unlike
- *	the old ide/pci driver.
  *
  *	LOCKING:
  *	None (inherited from caller).

drivers/hid/usbhid/hid-core.c

@@ -743,7 +743,7 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf)
 	hid->quirks = quirks;
 
 	if (!(usbhid = kzalloc(sizeof(struct usbhid_device), GFP_KERNEL)))
-		goto fail;
+		goto fail_no_usbhid;
 
 	hid->driver_data = usbhid;
 	usbhid->hid = hid;
@@ -878,6 +878,8 @@ fail:
 	usb_free_urb(usbhid->urbout);
 	usb_free_urb(usbhid->urbctrl);
 	hid_free_buffers(dev, hid);
+	kfree(usbhid);
+fail_no_usbhid:
 	hid_free_device(hid);
 
 	return NULL;
@@ -913,6 +915,7 @@ static void hid_disconnect(struct usb_interface *intf)
 	usb_free_urb(usbhid->urbout);
 
 	hid_free_buffers(hid_to_usb_dev(hid), hid);
+	kfree(usbhid);
 	hid_free_device(hid);
 }
 

drivers/hid/usbhid/hid-quirks.c

@@ -61,7 +61,9 @@
 #define USB_DEVICE_ID_APPLE_GEYSER4_JIS	0x021c
 #define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY	0x030a
 #define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY	0x030b
-#define USB_DEVICE_ID_APPLE_IR		0x8240
+
+#define USB_VENDOR_ID_ASUS		0x0b05
+#define USB_DEVICE_ID_ASUS_LCM		0x1726
 
 #define USB_VENDOR_ID_ATEN		0x0557
 #define USB_DEVICE_ID_ATEN_UC100KM	0x2004
@@ -198,6 +200,70 @@
 
 #define USB_VENDOR_ID_LOGITECH		0x046d
 #define USB_DEVICE_ID_LOGITECH_RECEIVER	0xc101
+#define USB_DEVICE_ID_LOGITECH_HARMONY  0xc110
+#define USB_DEVICE_ID_LOGITECH_HARMONY_2 0xc111
+#define USB_DEVICE_ID_LOGITECH_HARMONY_3 0xc112
+#define USB_DEVICE_ID_LOGITECH_HARMONY_4 0xc113
+#define USB_DEVICE_ID_LOGITECH_HARMONY_5 0xc114
+#define USB_DEVICE_ID_LOGITECH_HARMONY_6 0xc115
+#define USB_DEVICE_ID_LOGITECH_HARMONY_7 0xc116
+#define USB_DEVICE_ID_LOGITECH_HARMONY_8 0xc117
+#define USB_DEVICE_ID_LOGITECH_HARMONY_9 0xc118
+#define USB_DEVICE_ID_LOGITECH_HARMONY_10 0xc119
+#define USB_DEVICE_ID_LOGITECH_HARMONY_11 0xc11a
+#define USB_DEVICE_ID_LOGITECH_HARMONY_12 0xc11b
+#define USB_DEVICE_ID_LOGITECH_HARMONY_13 0xc11c
+#define USB_DEVICE_ID_LOGITECH_HARMONY_14 0xc11d
+#define USB_DEVICE_ID_LOGITECH_HARMONY_15 0xc11e
+#define USB_DEVICE_ID_LOGITECH_HARMONY_16 0xc11f
+#define USB_DEVICE_ID_LOGITECH_HARMONY_17 0xc120
+#define USB_DEVICE_ID_LOGITECH_HARMONY_18 0xc121
+#define USB_DEVICE_ID_LOGITECH_HARMONY_19 0xc122
+#define USB_DEVICE_ID_LOGITECH_HARMONY_20 0xc123
+#define USB_DEVICE_ID_LOGITECH_HARMONY_21 0xc124
+#define USB_DEVICE_ID_LOGITECH_HARMONY_22 0xc125
+#define USB_DEVICE_ID_LOGITECH_HARMONY_23 0xc126
+#define USB_DEVICE_ID_LOGITECH_HARMONY_24 0xc127
+#define USB_DEVICE_ID_LOGITECH_HARMONY_25 0xc128
+#define USB_DEVICE_ID_LOGITECH_HARMONY_26 0xc129
+#define USB_DEVICE_ID_LOGITECH_HARMONY_27 0xc12a
+#define USB_DEVICE_ID_LOGITECH_HARMONY_28 0xc12b
+#define USB_DEVICE_ID_LOGITECH_HARMONY_29 0xc12c
+#define USB_DEVICE_ID_LOGITECH_HARMONY_30 0xc12d
+#define USB_DEVICE_ID_LOGITECH_HARMONY_31 0xc12e
+#define USB_DEVICE_ID_LOGITECH_HARMONY_32 0xc12f
+#define USB_DEVICE_ID_LOGITECH_HARMONY_33 0xc130
+#define USB_DEVICE_ID_LOGITECH_HARMONY_34 0xc131
+#define USB_DEVICE_ID_LOGITECH_HARMONY_35 0xc132
+#define USB_DEVICE_ID_LOGITECH_HARMONY_36 0xc133
+#define USB_DEVICE_ID_LOGITECH_HARMONY_37 0xc134
+#define USB_DEVICE_ID_LOGITECH_HARMONY_38 0xc135
+#define USB_DEVICE_ID_LOGITECH_HARMONY_39 0xc136
+#define USB_DEVICE_ID_LOGITECH_HARMONY_40 0xc137
+#define USB_DEVICE_ID_LOGITECH_HARMONY_41 0xc138
+#define USB_DEVICE_ID_LOGITECH_HARMONY_42 0xc139
+#define USB_DEVICE_ID_LOGITECH_HARMONY_43 0xc13a
+#define USB_DEVICE_ID_LOGITECH_HARMONY_44 0xc13b
+#define USB_DEVICE_ID_LOGITECH_HARMONY_45 0xc13c
+#define USB_DEVICE_ID_LOGITECH_HARMONY_46 0xc13d
+#define USB_DEVICE_ID_LOGITECH_HARMONY_47 0xc13e
+#define USB_DEVICE_ID_LOGITECH_HARMONY_48 0xc13f
+#define USB_DEVICE_ID_LOGITECH_HARMONY_49 0xc140
+#define USB_DEVICE_ID_LOGITECH_HARMONY_50 0xc141
+#define USB_DEVICE_ID_LOGITECH_HARMONY_51 0xc142
+#define USB_DEVICE_ID_LOGITECH_HARMONY_52 0xc143
+#define USB_DEVICE_ID_LOGITECH_HARMONY_53 0xc144
+#define USB_DEVICE_ID_LOGITECH_HARMONY_54 0xc145
+#define USB_DEVICE_ID_LOGITECH_HARMONY_55 0xc146
+#define USB_DEVICE_ID_LOGITECH_HARMONY_56 0xc147
+#define USB_DEVICE_ID_LOGITECH_HARMONY_57 0xc148
+#define USB_DEVICE_ID_LOGITECH_HARMONY_58 0xc149
+#define USB_DEVICE_ID_LOGITECH_HARMONY_59 0xc14a
+#define USB_DEVICE_ID_LOGITECH_HARMONY_60 0xc14b
+#define USB_DEVICE_ID_LOGITECH_HARMONY_61 0xc14c
+#define USB_DEVICE_ID_LOGITECH_HARMONY_62 0xc14d
+#define USB_DEVICE_ID_LOGITECH_HARMONY_63 0xc14e
+#define USB_DEVICE_ID_LOGITECH_HARMONY_64 0xc14f
 #define USB_DEVICE_ID_LOGITECH_WHEEL	0xc294
 #define USB_DEVICE_ID_LOGITECH_KBD	0xc311
 #define USB_DEVICE_ID_S510_RECEIVER	0xc50c
@@ -221,6 +287,9 @@
 #define USB_DEVICE_ID_NCR_FIRST		0x0300
 #define USB_DEVICE_ID_NCR_LAST		0x03ff
 
+#define USB_VENDOR_ID_NATIONAL_SEMICONDUCTOR 0x0400
+#define USB_DEVICE_ID_N_S_HARMONY       0xc359
+
 #define USB_VENDOR_ID_NEC		0x073e
 #define USB_DEVICE_ID_NEC_USB_GAME_PAD	0x0301
 
@@ -315,7 +384,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_24, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_AIRCABLE, USB_DEVICE_ID_AIRCABLE1, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IR, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_LCM, HID_QUIRK_IGNORE},
 	{ USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_CIDC, 0x0103, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_HIDCOM, HID_QUIRK_IGNORE },
@@ -463,6 +532,71 @@ static const struct hid_blacklist {
 
 	{ USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_W7658, HID_QUIRK_RESET_LEDS },
 	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_KBD, HID_QUIRK_RESET_LEDS },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_2, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_3, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_4, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_5, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_6, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_7, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_8, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_9, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_10, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_11, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_12, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_13, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_14, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_15, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_16, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_17, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_18, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_19, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_20, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_21, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_22, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_23, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_24, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_25, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_26, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_27, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_28, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_29, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_30, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_31, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_32, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_33, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_34, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_35, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_36, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_37, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_38, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_39, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_40, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_41, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_42, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_43, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_44, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_45, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_46, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_47, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_48, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_49, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_50, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_51, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_52, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_53, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_54, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_55, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_56, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_57, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_58, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_59, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_60, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_61, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_62, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_63, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_64, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_NATIONAL_SEMICONDUCTOR, USB_DEVICE_ID_N_S_HARMONY, HID_QUIRK_IGNORE },
 
 	{ 0, 0 }
 };

drivers/ide/arm/icside.c

@@ -693,13 +693,12 @@ icside_probe(struct expansion_card *ec, const struct ecard_id *id)
 	if (ret)
 		goto out;
 
-	state = kmalloc(sizeof(struct icside_state), GFP_KERNEL);
+	state = kzalloc(sizeof(struct icside_state), GFP_KERNEL);
 	if (!state) {
 		ret = -ENOMEM;
 		goto release;
 	}
 
-	memset(state, 0, sizeof(state));
 	state->type	= ICS_TYPE_NOTYPE;
 	state->dev	= &ec->dev;
 

drivers/ide/ide-tape.c

@@ -640,7 +640,7 @@ typedef enum {
 } idetape_chrdev_direction_t;
 
 struct idetape_bh {
-	unsigned short b_size;
+	u32 b_size;
 	atomic_t b_count;
 	struct idetape_bh *b_reqnext;
 	char *b_data;

drivers/ide/pci/alim15x3.c

@@ -593,7 +593,7 @@ static struct dmi_system_id cable_dmi_table[] = {
 		.ident = "HP Pavilion N5430",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
-			DMI_MATCH(DMI_BOARD_NAME, "OmniBook N32N-736"),
+			DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"),
 		},
 	},
 	{ }

drivers/ide/pci/cmd64x.c

@@ -475,11 +475,11 @@ static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev, const cha
 		switch (rev) {
 		case 0x07:
 		case 0x05:
-			printk("%s: UltraDMA capable", name);
+			printk("%s: UltraDMA capable\n", name);
 			break;
 		case 0x03:
 		default:
-			printk("%s: MultiWord DMA force limited", name);
+			printk("%s: MultiWord DMA force limited\n", name);
 			break;
 		case 0x01:
 			printk("%s: MultiWord DMA limited, "

drivers/ide/pci/cs5520.c

@@ -133,7 +133,7 @@ static void cs5520_tune_drive(ide_drive_t *drive, u8 pio)
 static int cs5520_config_drive_xfer_rate(ide_drive_t *drive)
 {
 	/* Tune the drive for PIO modes up to PIO 4 */	
-	cs5520_tune_drive(drive, 4);
+	cs5520_tune_drive(drive, 255);
 
 	/* Then tell the core to use DMA operations */
 	return 0;

drivers/ide/pci/cs5535.c

@@ -2,6 +2,7 @@
  * linux/drivers/ide/pci/cs5535.c
  *
  * Copyright (C) 2004-2005 Advanced Micro Devices, Inc.
+ * Copyright (C)      2007 Bartlomiej Zolnierkiewicz
  *
  * History:
  * 09/20/2005 - Jaya Kumar <jayakumar.ide@gmail.com>
@@ -83,14 +84,17 @@ static void cs5535_set_speed(ide_drive_t *drive, u8 speed)
 
 	/* Set the PIO timings */
 	if ((speed & XFER_MODE) == XFER_PIO) {
-		u8 pioa;
-		u8 piob;
-		u8 cmd;
+		ide_drive_t *pair = &drive->hwif->drives[drive->dn ^ 1];
+		u8 cmd, pioa;
 
-		pioa = speed - XFER_PIO_0;
-		piob = ide_get_best_pio_mode(&(drive->hwif->drives[!unit]),
-						255, 4);
-		cmd = pioa < piob ? pioa : piob;
+		cmd = pioa = speed - XFER_PIO_0;
+
+		if (pair->present) {
+			u8 piob = ide_get_best_pio_mode(pair, 255, 4);
+
+			if (piob < cmd)
+				cmd = piob;
+		}
 
 		/* Write the speed of the current drive */
 		reg = (cs5535_pio_cmd_timings[cmd] << 16) |
@@ -116,7 +120,7 @@ static void cs5535_set_speed(ide_drive_t *drive, u8 speed)
 
 		reg &= 0x80000000UL;  /* Preserve the PIO format bit */
 
-		if (speed >= XFER_UDMA_0 && speed <= XFER_UDMA_7)
+		if (speed >= XFER_UDMA_0 && speed <= XFER_UDMA_4)
 			reg |= cs5535_udma_timings[speed - XFER_UDMA_0];
 		else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
 			reg |= cs5535_mwdma_timings[speed - XFER_MW_DMA_0];
@@ -151,32 +155,22 @@ static int cs5535_set_drive(ide_drive_t *drive, u8 speed)
  *
  *	A callback from the upper layers for PIO-only tuning.
  */
-static void cs5535_tuneproc(ide_drive_t *drive, u8 xferspeed)
+static void cs5535_tuneproc(ide_drive_t *drive, u8 pio)
 {
-	u8 modes[] = {	XFER_PIO_0, XFER_PIO_1, XFER_PIO_2, XFER_PIO_3,
-			XFER_PIO_4 };
-
-	/* cs5535 max pio is pio 4, best_pio will check the blacklist.
-	i think we don't need to rate_filter the incoming xferspeed
-	since we know we're only going to choose pio */
-	xferspeed = ide_get_best_pio_mode(drive, xferspeed, 4);
-	ide_config_drive_speed(drive, modes[xferspeed]);
-	cs5535_set_speed(drive, xferspeed);
+	pio = ide_get_best_pio_mode(drive, pio, 4);
+	ide_config_drive_speed(drive, XFER_PIO_0 + pio);
+	cs5535_set_speed(drive, XFER_PIO_0 + pio);
 }
 
 static int cs5535_dma_check(ide_drive_t *drive)
 {
-	u8 speed;
-
 	drive->init_speed = 0;
 
 	if (ide_tune_dma(drive))
 		return 0;
 
-	if (ide_use_fast_pio(drive)) {
-		speed = ide_get_best_pio_mode(drive, 255, 4);
-		cs5535_set_drive(drive, speed);
-	}
+	if (ide_use_fast_pio(drive))
+		cs5535_tuneproc(drive, 255);
 
 	return -1;
 }

drivers/ide/pci/it8213.c

@@ -21,7 +21,7 @@
  *	it8213_dma_2_pio		-	return the PIO mode matching DMA
  *	@xfer_rate: transfer speed
  *
- *	Returns the nearest equivalent PIO timing for the PIO or DMA
+ *	Returns the nearest equivalent PIO timing for the DMA
  *	mode requested by the controller.
  */
 
@@ -35,34 +35,28 @@ static u8 it8213_dma_2_pio (u8 xfer_rate) {
 		case XFER_UDMA_1:
 		case XFER_UDMA_0:
 		case XFER_MW_DMA_2:
-		case XFER_PIO_4:
 			return 4;
 		case XFER_MW_DMA_1:
-		case XFER_PIO_3:
 			return 3;
 		case XFER_SW_DMA_2:
-		case XFER_PIO_2:
 			return 2;
 		case XFER_MW_DMA_0:
 		case XFER_SW_DMA_1:
 		case XFER_SW_DMA_0:
-		case XFER_PIO_1:
-		case XFER_PIO_0:
-		case XFER_PIO_SLOW:
 		default:
 			return 0;
 	}
 }
 
 /*
- *	it8213_tuneproc	-	tune a drive
+ *	it8213_tune_pio	-	tune a drive
  *	@drive: drive to tune
  *	@pio: desired PIO mode
  *
  *	Set the interface PIO mode.
  */
 
-static void it8213_tuneproc (ide_drive_t *drive, u8 pio)
+static void it8213_tune_pio(ide_drive_t *drive, const u8 pio)
 {
 	ide_hwif_t *hwif	= HWIF(drive);
 	struct pci_dev *dev	= hwif->pci_dev;
@@ -82,8 +76,6 @@ static void it8213_tuneproc (ide_drive_t *drive, u8 pio)
 					{ 2, 1 },
 					{ 2, 3 }, };
 
-	pio = ide_get_best_pio_mode(drive, pio, 4);
-
 	spin_lock_irqsave(&tune_lock, flags);
 	pci_read_config_word(dev, master_port, &master_data);
 
@@ -113,6 +105,13 @@ static void it8213_tuneproc (ide_drive_t *drive, u8 pio)
 	spin_unlock_irqrestore(&tune_lock, flags);
 }
 
+static void it8213_tuneproc(ide_drive_t *drive, u8 pio)
+{
+	pio = ide_get_best_pio_mode(drive, pio, 4);
+	it8213_tune_pio(drive, pio);
+	ide_config_drive_speed(drive, XFER_PIO_0 + pio);
+}
+
 /**
  *	it8213_tune_chipset	-	set controller timings
  *	@drive: Drive to set up
@@ -193,7 +192,12 @@ static int it8213_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 		if (reg55 & w_flag)
 			pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
 	}
-	it8213_tuneproc(drive, it8213_dma_2_pio(speed));
+
+	if (speed > XFER_PIO_4)
+		it8213_tune_pio(drive, it8213_dma_2_pio(speed));
+	else
+		it8213_tune_pio(drive, speed - XFER_PIO_0);
+
 	return ide_config_drive_speed(drive, speed);
 }
 
@@ -209,13 +213,10 @@ static int it8213_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 
 static int it8213_config_drive_for_dma (ide_drive_t *drive)
 {
-	u8 pio;
-
 	if (ide_tune_dma(drive))
 		return 0;
 
-	pio = ide_get_best_pio_mode(drive, 255, 4);
-	it8213_tune_chipset(drive, XFER_PIO_0 + pio);
+	it8213_tuneproc(drive, 255);
 
 	return -1;
 }

drivers/ide/pci/jmicron.c

@@ -83,23 +83,10 @@ static u8 __devinit ata66_jmicron(ide_hwif_t *hwif)
 	return ATA_CBL_PATA80;
 }
 
-static void jmicron_tuneproc (ide_drive_t *drive, byte mode_wanted)
+static void jmicron_tuneproc(ide_drive_t *drive, u8 pio)
 {
-	return;
-}
-
-/**
- *	config_jmicron_chipset_for_pio	-	set drive timings
- *	@drive: drive to tune
- *	@speed we want
- *
- */
-
-static void config_jmicron_chipset_for_pio (ide_drive_t *drive, byte set_speed)
-{
-	u8 speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, 5);
-	if (set_speed)
-		(void) ide_config_drive_speed(drive, speed);
+	pio = ide_get_best_pio_mode(drive, pio, 5);
+	ide_config_drive_speed(drive, XFER_PIO_0 + pio);
 }
 
 /**
@@ -132,7 +119,7 @@ static int jmicron_config_drive_for_dma (ide_drive_t *drive)
 	if (ide_tune_dma(drive))
 		return 0;
 
-	config_jmicron_chipset_for_pio(drive, 1);
+	jmicron_tuneproc(drive, 255);
 
 	return -1;
 }

drivers/ide/pci/piix.c

@@ -1,5 +1,5 @@
 /*
- *  linux/drivers/ide/pci/piix.c	Version 0.50	Jun 10, 2007
+ *  linux/drivers/ide/pci/piix.c	Version 0.51	Jul 6, 2007
  *
  *  Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
  *  Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
@@ -109,7 +109,7 @@ static int no_piix_dma;
  *	piix_dma_2_pio		-	return the PIO mode matching DMA
  *	@xfer_rate: transfer speed
  *
- *	Returns the nearest equivalent PIO timing for the PIO or DMA
+ *	Returns the nearest equivalent PIO timing for the DMA
  *	mode requested by the controller.
  */
  
@@ -123,20 +123,14 @@ static u8 piix_dma_2_pio (u8 xfer_rate) {
 		case XFER_UDMA_1:
 		case XFER_UDMA_0:
 		case XFER_MW_DMA_2:
-		case XFER_PIO_4:
 			return 4;
 		case XFER_MW_DMA_1:
-		case XFER_PIO_3:
 			return 3;
 		case XFER_SW_DMA_2:
-		case XFER_PIO_2:
 			return 2;
 		case XFER_MW_DMA_0:
 		case XFER_SW_DMA_1:
 		case XFER_SW_DMA_0:
-		case XFER_PIO_1:
-		case XFER_PIO_0:
-		case XFER_PIO_SLOW:
 		default:
 			return 0;
 	}
@@ -269,6 +263,7 @@ static int piix_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 		case XFER_PIO_4:
 		case XFER_PIO_3:
 		case XFER_PIO_2:
+		case XFER_PIO_1:
 		case XFER_PIO_0:	break;
 		default:		return -1;
 	}
@@ -299,7 +294,11 @@ static int piix_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 			pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
 	}
 
-	piix_tune_pio(drive, piix_dma_2_pio(speed));
+	if (speed > XFER_PIO_4)
+		piix_tune_pio(drive, piix_dma_2_pio(speed));
+	else
+		piix_tune_pio(drive, speed - XFER_PIO_0);
+
 	return ide_config_drive_speed(drive, speed);
 }
 

drivers/ide/pci/scc_pata.c

@@ -190,7 +190,7 @@ scc_ide_outsl(unsigned long port, void *addr, u32 count)
 }
 
 /**
- *	scc_tuneproc	-	tune a drive PIO mode
+ *	scc_tune_pio	-	tune a drive PIO mode
  *	@drive: drive to tune
  *	@mode_wanted: the target operating mode
  *
@@ -198,7 +198,7 @@ scc_ide_outsl(unsigned long port, void *addr, u32 count)
  *	controller.
  */
 
-static void scc_tuneproc(ide_drive_t *drive, byte mode_wanted)
+static void scc_tune_pio(ide_drive_t *drive, const u8 pio)
 {
 	ide_hwif_t *hwif = HWIF(drive);
 	struct scc_ports *ports = ide_get_hwifdata(hwif);
@@ -207,41 +207,25 @@ static void scc_tuneproc(ide_drive_t *drive, byte mode_wanted)
 	unsigned long piosht_port = ctl_base + 0x000;
 	unsigned long pioct_port = ctl_base + 0x004;
 	unsigned long reg;
-	unsigned char speed = XFER_PIO_0;
 	int offset;
 
-	mode_wanted = ide_get_best_pio_mode(drive, mode_wanted, 4);
-	switch (mode_wanted) {
-	case 4:
-		speed = XFER_PIO_4;
-		break;
-	case 3:
-		speed = XFER_PIO_3;
-		break;
-	case 2:
-		speed = XFER_PIO_2;
-		break;
-	case 1:
-		speed = XFER_PIO_1;
-		break;
-	case 0:
-	default:
-		speed = XFER_PIO_0;
-		break;
-	}
-
 	reg = in_be32((void __iomem *)cckctrl_port);
 	if (reg & CCKCTRL_ATACLKOEN) {
 		offset = 1; /* 133MHz */
 	} else {
 		offset = 0; /* 100MHz */
 	}
-	reg = JCHSTtbl[offset][mode_wanted] << 16 | JCHHTtbl[offset][mode_wanted];
+	reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio];
 	out_be32((void __iomem *)piosht_port, reg);
-	reg = JCHCTtbl[offset][mode_wanted];
+	reg = JCHCTtbl[offset][pio];
 	out_be32((void __iomem *)pioct_port, reg);
+}
 
-	ide_config_drive_speed(drive, speed);
+static void scc_tuneproc(ide_drive_t *drive, u8 pio)
+{
+	pio = ide_get_best_pio_mode(drive, pio, 4);
+	scc_tune_pio(drive, pio);
+	ide_config_drive_speed(drive, XFER_PIO_0 + pio);
 }
 
 /**
@@ -280,26 +264,21 @@ static int scc_tune_chipset(ide_drive_t *drive, byte xferspeed)
 
 	switch (speed) {
 	case XFER_UDMA_6:
-		idx = 6;
-		break;
 	case XFER_UDMA_5:
-		idx = 5;
-		break;
 	case XFER_UDMA_4:
-		idx = 4;
-		break;
 	case XFER_UDMA_3:
-		idx = 3;
-		break;
 	case XFER_UDMA_2:
-		idx = 2;
-		break;
 	case XFER_UDMA_1:
-		idx = 1;
-		break;
 	case XFER_UDMA_0:
-		idx = 0;
+		idx = speed - XFER_UDMA_0;
 		break;
+	case XFER_PIO_4:
+	case XFER_PIO_3:
+	case XFER_PIO_2:
+	case XFER_PIO_1:
+	case XFER_PIO_0:
+		scc_tune_pio(drive, speed - XFER_PIO_0);
+		return ide_config_drive_speed(drive, speed);
 	default:
 		return 1;
 	}
@@ -329,7 +308,7 @@ static int scc_tune_chipset(ide_drive_t *drive, byte xferspeed)
  *	required.
  *      If the drive isn't suitable for DMA or we hit other problems
  *      then we will drop down to PIO and set up PIO appropriately.
- *      (return 1)
+ *      (return -1)
  */
 
 static int scc_config_drive_for_dma(ide_drive_t *drive)
@@ -338,7 +317,7 @@ static int scc_config_drive_for_dma(ide_drive_t *drive)
 		return 0;
 
 	if (ide_use_fast_pio(drive))
-		scc_tuneproc(drive, 4);
+		scc_tuneproc(drive, 255);
 
 	return -1;
 }

drivers/ide/pci/sis5513.c

@@ -801,6 +801,7 @@ struct sis_laptop {
 static const struct sis_laptop sis_laptop[] = {
 	/* devid, subvendor, subdev */
 	{ 0x5513, 0x1043, 0x1107 },	/* ASUS A6K */
+	{ 0x5513, 0x1734, 0x105f },	/* FSC Amilo A1630 */
 	/* end marker */
 	{ 0, }
 };

drivers/ide/pci/slc90e66.c

@@ -1,5 +1,5 @@
 /*
- *  linux/drivers/ide/pci/slc90e66.c	Version 0.14	February 8, 2007
+ *  linux/drivers/ide/pci/slc90e66.c	Version 0.15	Jul 6, 2007
  *
  *  Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org>
  *  Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com>
@@ -29,20 +29,14 @@ static u8 slc90e66_dma_2_pio (u8 xfer_rate) {
 		case XFER_UDMA_1:
 		case XFER_UDMA_0:
 		case XFER_MW_DMA_2:
-		case XFER_PIO_4:
 			return 4;
 		case XFER_MW_DMA_1:
-		case XFER_PIO_3:
 			return 3;
 		case XFER_SW_DMA_2:
-		case XFER_PIO_2:
 			return 2;
 		case XFER_MW_DMA_0:
 		case XFER_SW_DMA_1:
 		case XFER_SW_DMA_0:
-		case XFER_PIO_1:
-		case XFER_PIO_0:
-		case XFER_PIO_SLOW:
 		default:
 			return 0;
 	}
@@ -136,6 +130,7 @@ static int slc90e66_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 		case XFER_PIO_4:
 		case XFER_PIO_3:
 		case XFER_PIO_2:
+		case XFER_PIO_1:
 		case XFER_PIO_0:        break;
 		default:		return -1;
 	}
@@ -156,7 +151,11 @@ static int slc90e66_tune_chipset (ide_drive_t *drive, u8 xferspeed)
 			pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
 	}
 
-	slc90e66_tune_pio(drive, slc90e66_dma_2_pio(speed));
+	if (speed > XFER_PIO_4)
+		slc90e66_tune_pio(drive, slc90e66_dma_2_pio(speed));
+	else
+		slc90e66_tune_pio(drive, speed - XFER_PIO_0);
+
 	return ide_config_drive_speed(drive, speed);
 }
 

drivers/pci/pci-driver.c

@@ -310,7 +310,7 @@ static int pci_default_resume(struct pci_dev *pci_dev)
 	/* restore the PCI config space */
 	pci_restore_state(pci_dev);
 	/* if the device was enabled before suspend, reenable */
-	retval = __pci_reenable_device(pci_dev);
+	retval = pci_reenable_device(pci_dev);
 	/* if the device was busmaster before the suspend, make it busmaster again */
 	if (pci_dev->is_busmaster)
 		pci_set_master(pci_dev);

drivers/pci/pci.c

@@ -695,14 +695,13 @@ static int do_pci_enable_device(struct pci_dev *dev, int bars)
 }
 
 /**
- * __pci_reenable_device - Resume abandoned device
+ * pci_reenable_device - Resume abandoned device
  * @dev: PCI device to be resumed
  *
  *  Note this function is a backend of pci_default_resume and is not supposed
  *  to be called by normal code, write proper resume handler and use it instead.
  */
-int
-__pci_reenable_device(struct pci_dev *dev)
+int pci_reenable_device(struct pci_dev *dev)
 {
 	if (atomic_read(&dev->enable_cnt))
 		return do_pci_enable_device(dev, (1 << PCI_NUM_RESOURCES) - 1);
@@ -1604,7 +1603,7 @@ early_param("pci", pci_setup);
 device_initcall(pci_init);
 
 EXPORT_SYMBOL_GPL(pci_restore_bars);
-EXPORT_SYMBOL(__pci_reenable_device);
+EXPORT_SYMBOL(pci_reenable_device);
 EXPORT_SYMBOL(pci_enable_device_bars);
 EXPORT_SYMBOL(pci_enable_device);
 EXPORT_SYMBOL(pcim_enable_device);

drivers/scsi/ide-scsi.c

@@ -328,17 +328,15 @@ static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_co
 	u8             *buf;
 
 	/* stuff a sense request in front of our current request */
-	pc = kmalloc (sizeof (idescsi_pc_t), GFP_ATOMIC);
-	rq = kmalloc (sizeof (struct request), GFP_ATOMIC);
-	buf = kmalloc(SCSI_SENSE_BUFFERSIZE, GFP_ATOMIC);
-	if (pc == NULL || rq == NULL || buf == NULL) {
+	pc = kzalloc(sizeof(idescsi_pc_t), GFP_ATOMIC);
+	rq = kmalloc(sizeof(struct request), GFP_ATOMIC);
+	buf = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_ATOMIC);
+	if (!pc || !rq || !buf) {
 		kfree(buf);
 		kfree(rq);
 		kfree(pc);
 		return -ENOMEM;
 	}
-	memset (pc, 0, sizeof (idescsi_pc_t));
-	memset (buf, 0, SCSI_SENSE_BUFFERSIZE);
 	ide_init_drive_cmd(rq);
 	rq->special = (char *) pc;
 	pc->rq = rq;

include/asm-avr32/bug.h

@@ -57,7 +57,7 @@
 
 #define WARN_ON(condition)							\
 	({								\
-		typeof(condition) __ret_warn_on = (condition);		\
+		int __ret_warn_on = !!(condition);			\
 		if (unlikely(__ret_warn_on))				\
 			_BUG_OR_WARN(BUGFLAG_WARNING);			\
 		unlikely(__ret_warn_on);				\

include/asm-frv/mb86943a.h

@@ -36,4 +36,7 @@
 #define __reg_MB86943_pci_sl_io_base	*(volatile uint32_t *) (__region_CS1 + 0x70)
 #define __reg_MB86943_pci_sl_mem_base	*(volatile uint32_t *) (__region_CS1 + 0x78)
 
+#define __reg_MB86943_pci_arbiter	*(volatile uint32_t *) (__region_CS2 + 0x01300014)
+#define MB86943_PCIARB_EN		0x00000001
+
 #endif /* _ASM_MB86943A_H */

include/asm-parisc/bug.h

@@ -74,7 +74,7 @@
 
 
 #define WARN_ON(x) ({						\
-	typeof(x) __ret_warn_on = (x);				\
+	int __ret_warn_on = !!(x);				\
 	if (__builtin_constant_p(__ret_warn_on)) {		\
 		if (__ret_warn_on)				\
 			__WARN();				\

include/asm-s390/bug.h

@@ -50,7 +50,7 @@
 #define BUG()	__EMIT_BUG(0)
 
 #define WARN_ON(x) ({					\
-	typeof(x) __ret_warn_on = (x);			\
+	int __ret_warn_on = !!(x);			\
 	if (__builtin_constant_p(__ret_warn_on)) {	\
 		if (__ret_warn_on)			\
 			__EMIT_BUG(BUGFLAG_WARNING);	\

include/asm-sh/bug.h

@@ -61,7 +61,7 @@ do {							\
 } while (0)
 
 #define WARN_ON(x) ({						\
-	typeof(x) __ret_warn_on = (x);				\
+	int __ret_warn_on = !!(x);				\
 	if (__builtin_constant_p(__ret_warn_on)) {		\
 		if (__ret_warn_on)				\
 			__WARN();				\

include/linux/pci.h

@@ -534,7 +534,7 @@ static inline int pci_write_config_dword(struct pci_dev *dev, int where, u32 val
 
 int __must_check pci_enable_device(struct pci_dev *dev);
 int __must_check pci_enable_device_bars(struct pci_dev *dev, int mask);
-int __must_check __pci_reenable_device(struct pci_dev *);
+int __must_check pci_reenable_device(struct pci_dev *);
 int __must_check pcim_enable_device(struct pci_dev *pdev);
 void pcim_pin_device(struct pci_dev *pdev);
 

include/linux/sched.h

@@ -734,7 +734,6 @@ struct sched_domain {
 	unsigned long max_interval;	/* Maximum balance interval ms */
 	unsigned int busy_factor;	/* less balancing by factor if busy */
 	unsigned int imbalance_pct;	/* No balance until over watermark */
-	unsigned long long cache_hot_time; /* Task considered cache hot (ns) */
 	unsigned int cache_nice_tries;	/* Leave cache hot tasks for # tries */
 	unsigned int busy_idx;
 	unsigned int idle_idx;
@@ -875,7 +874,7 @@ struct sched_class {
 
 	void (*set_curr_task) (struct rq *rq);
 	void (*task_tick) (struct rq *rq, struct task_struct *p);
-	void (*task_new) (struct rq *rq, struct task_struct *p);
+	void (*task_new) (struct rq *rq, struct task_struct *p, u64 now);
 };
 
 struct load_weight {
@@ -905,23 +904,28 @@ struct sched_entity {
 	struct rb_node		run_node;
 	unsigned int		on_rq;
 
+	u64			exec_start;
+	u64			sum_exec_runtime;
 	u64			wait_start_fair;
+	u64			sleep_start_fair;
+
+#ifdef CONFIG_SCHEDSTATS
 	u64			wait_start;
-	u64			exec_start;
+	u64			wait_max;
+	s64			sum_wait_runtime;
+
 	u64			sleep_start;
-	u64			sleep_start_fair;
-	u64			block_start;
 	u64			sleep_max;
+	s64			sum_sleep_runtime;
+
+	u64			block_start;
 	u64			block_max;
 	u64			exec_max;
-	u64			wait_max;
-	u64			last_ran;
 
-	u64			sum_exec_runtime;
-	s64			sum_wait_runtime;
-	s64			sum_sleep_runtime;
 	unsigned long		wait_runtime_overruns;
 	unsigned long		wait_runtime_underruns;
+#endif
+
 #ifdef CONFIG_FAIR_GROUP_SCHED
 	struct sched_entity	*parent;
 	/* rq on which this entity is (to be) queued: */

include/linux/topology.h

@@ -185,7 +185,6 @@
 	.max_interval		= 64*num_online_cpus(),	\
 	.busy_factor		= 128,			\
 	.imbalance_pct		= 133,			\
-	.cache_hot_time		= (10*1000000),		\
 	.cache_nice_tries	= 1,			\
 	.busy_idx		= 3,			\
 	.idle_idx		= 3,			\

include/net/netlabel.h

@@ -132,6 +132,8 @@ struct netlbl_lsm_secattr_catmap {
 #define NETLBL_SECATTR_CACHE            0x00000002
 #define NETLBL_SECATTR_MLS_LVL          0x00000004
 #define NETLBL_SECATTR_MLS_CAT          0x00000008
+#define NETLBL_SECATTR_CACHEABLE        (NETLBL_SECATTR_MLS_LVL | \
+					 NETLBL_SECATTR_MLS_CAT)
 struct netlbl_lsm_secattr {
 	u32 flags;
 

kernel/irq/resend.c

@@ -62,6 +62,15 @@ void check_irq_resend(struct irq_desc *desc, unsigned int irq)
 	 */
 	desc->chip->enable(irq);
 
+	/*
+	 * Temporary hack to figure out more about the problem, which
+	 * is causing the ancient network cards to die.
+	 */
+	if (desc->handle_irq != handle_edge_irq) {
+		WARN_ON_ONCE(1);
+		return;
+	}
+
 	if ((status & (IRQ_PENDING | IRQ_REPLAY)) == IRQ_PENDING) {
 		desc->status = (status & ~IRQ_PENDING) | IRQ_REPLAY;
 

kernel/sched.c

@@ -637,7 +637,7 @@ static u64 div64_likely32(u64 divident, unsigned long divisor)
 
 #define WMULT_SHIFT	32
 
-static inline unsigned long
+static unsigned long
 calc_delta_mine(unsigned long delta_exec, unsigned long weight,
 		struct load_weight *lw)
 {
@@ -657,7 +657,7 @@ calc_delta_mine(unsigned long delta_exec, unsigned long weight,
 		tmp = (tmp * lw->inv_weight) >> WMULT_SHIFT;
 	}
 
-	return (unsigned long)min(tmp, (u64)sysctl_sched_runtime_limit);
+	return (unsigned long)min(tmp, (u64)(unsigned long)LONG_MAX);
 }
 
 static inline unsigned long
@@ -678,46 +678,6 @@ static void update_load_sub(struct load_weight *lw, unsigned long dec)
 	lw->inv_weight = 0;
 }
 
-static void __update_curr_load(struct rq *rq, struct load_stat *ls)
-{
-	if (rq->curr != rq->idle && ls->load.weight) {
-		ls->delta_exec += ls->delta_stat;
-		ls->delta_fair += calc_delta_fair(ls->delta_stat, &ls->load);
-		ls->delta_stat = 0;
-	}
-}
-
-/*
- * Update delta_exec, delta_fair fields for rq.
- *
- * delta_fair clock advances at a rate inversely proportional to
- * total load (rq->ls.load.weight) on the runqueue, while
- * delta_exec advances at the same rate as wall-clock (provided
- * cpu is not idle).
- *
- * delta_exec / delta_fair is a measure of the (smoothened) load on this
- * runqueue over any given interval. This (smoothened) load is used
- * during load balance.
- *
- * This function is called /before/ updating rq->ls.load
- * and when switching tasks.
- */
-static void update_curr_load(struct rq *rq, u64 now)
-{
-	struct load_stat *ls = &rq->ls;
-	u64 start;
-
-	start = ls->load_update_start;
-	ls->load_update_start = now;
-	ls->delta_stat += now - start;
-	/*
-	 * Stagger updates to ls->delta_fair. Very frequent updates
-	 * can be expensive.
-	 */
-	if (ls->delta_stat >= sysctl_sched_stat_granularity)
-		__update_curr_load(rq, ls);
-}
-
 /*
  * To aid in avoiding the subversion of "niceness" due to uneven distribution
  * of tasks with abnormal "nice" values across CPUs the contribution that
@@ -727,19 +687,6 @@ static void update_curr_load(struct rq *rq, u64 now)
  * slice expiry etc.
  */
 
-/*
- * Assume: static_prio_timeslice(NICE_TO_PRIO(0)) == DEF_TIMESLICE
- * If static_prio_timeslice() is ever changed to break this assumption then
- * this code will need modification
- */
-#define TIME_SLICE_NICE_ZERO DEF_TIMESLICE
-#define load_weight(lp) \
-	(((lp) * SCHED_LOAD_SCALE) / TIME_SLICE_NICE_ZERO)
-#define PRIO_TO_LOAD_WEIGHT(prio) \
-	load_weight(static_prio_timeslice(prio))
-#define RTPRIO_TO_LOAD_WEIGHT(rp) \
-	(PRIO_TO_LOAD_WEIGHT(MAX_RT_PRIO) + load_weight(rp))
-
 #define WEIGHT_IDLEPRIO		2
 #define WMULT_IDLEPRIO		(1 << 31)
 
@@ -781,32 +728,6 @@ static const u32 prio_to_wmult[40] = {
 /*  15 */ 119304647, 148102320, 186737708, 238609294, 286331153,
 };
 
-static inline void
-inc_load(struct rq *rq, const struct task_struct *p, u64 now)
-{
-	update_curr_load(rq, now);
-	update_load_add(&rq->ls.load, p->se.load.weight);
-}
-
-static inline void
-dec_load(struct rq *rq, const struct task_struct *p, u64 now)
-{
-	update_curr_load(rq, now);
-	update_load_sub(&rq->ls.load, p->se.load.weight);
-}
-
-static inline void inc_nr_running(struct task_struct *p, struct rq *rq, u64 now)
-{
-	rq->nr_running++;
-	inc_load(rq, p, now);
-}
-
-static inline void dec_nr_running(struct task_struct *p, struct rq *rq, u64 now)
-{
-	rq->nr_running--;
-	dec_load(rq, p, now);
-}
-
 static void activate_task(struct rq *rq, struct task_struct *p, int wakeup);
 
 /*
@@ -837,6 +758,72 @@ static int balance_tasks(struct rq *this_rq, int this_cpu, struct rq *busiest,
 
 #define sched_class_highest (&rt_sched_class)
 
+static void __update_curr_load(struct rq *rq, struct load_stat *ls)
+{
+	if (rq->curr != rq->idle && ls->load.weight) {
+		ls->delta_exec += ls->delta_stat;
+		ls->delta_fair += calc_delta_fair(ls->delta_stat, &ls->load);
+		ls->delta_stat = 0;
+	}
+}
+
+/*
+ * Update delta_exec, delta_fair fields for rq.
+ *
+ * delta_fair clock advances at a rate inversely proportional to
+ * total load (rq->ls.load.weight) on the runqueue, while
+ * delta_exec advances at the same rate as wall-clock (provided
+ * cpu is not idle).
+ *
+ * delta_exec / delta_fair is a measure of the (smoothened) load on this
+ * runqueue over any given interval. This (smoothened) load is used
+ * during load balance.
+ *
+ * This function is called /before/ updating rq->ls.load
+ * and when switching tasks.
+ */
+static void update_curr_load(struct rq *rq, u64 now)
+{
+	struct load_stat *ls = &rq->ls;
+	u64 start;
+
+	start = ls->load_update_start;
+	ls->load_update_start = now;
+	ls->delta_stat += now - start;
+	/*
+	 * Stagger updates to ls->delta_fair. Very frequent updates
+	 * can be expensive.
+	 */
+	if (ls->delta_stat >= sysctl_sched_stat_granularity)
+		__update_curr_load(rq, ls);
+}
+
+static inline void
+inc_load(struct rq *rq, const struct task_struct *p, u64 now)
+{
+	update_curr_load(rq, now);
+	update_load_add(&rq->ls.load, p->se.load.weight);
+}
+
+static inline void
+dec_load(struct rq *rq, const struct task_struct *p, u64 now)
+{
+	update_curr_load(rq, now);
+	update_load_sub(&rq->ls.load, p->se.load.weight);
+}
+
+static void inc_nr_running(struct task_struct *p, struct rq *rq, u64 now)
+{
+	rq->nr_running++;
+	inc_load(rq, p, now);
+}
+
+static void dec_nr_running(struct task_struct *p, struct rq *rq, u64 now)
+{
+	rq->nr_running--;
+	dec_load(rq, p, now);
+}
+
 static void set_load_weight(struct task_struct *p)
 {
 	task_rq(p)->cfs.wait_runtime -= p->se.wait_runtime;
@@ -996,18 +983,21 @@ void set_task_cpu(struct task_struct *p, unsigned int new_cpu)
 	u64 clock_offset, fair_clock_offset;
 
 	clock_offset = old_rq->clock - new_rq->clock;
-	fair_clock_offset = old_rq->cfs.fair_clock -
-						 new_rq->cfs.fair_clock;
-	if (p->se.wait_start)
-		p->se.wait_start -= clock_offset;
+	fair_clock_offset = old_rq->cfs.fair_clock - new_rq->cfs.fair_clock;
+
 	if (p->se.wait_start_fair)
 		p->se.wait_start_fair -= fair_clock_offset;
+	if (p->se.sleep_start_fair)
+		p->se.sleep_start_fair -= fair_clock_offset;
+
+#ifdef CONFIG_SCHEDSTATS
+	if (p->se.wait_start)
+		p->se.wait_start -= clock_offset;
 	if (p->se.sleep_start)
 		p->se.sleep_start -= clock_offset;
 	if (p->se.block_start)
 		p->se.block_start -= clock_offset;
-	if (p->se.sleep_start_fair)
-		p->se.sleep_start_fair -= fair_clock_offset;
+#endif
 
 	__set_task_cpu(p, new_cpu);
 }
@@ -1568,17 +1558,19 @@ int fastcall wake_up_state(struct task_struct *p, unsigned int state)
 static void __sched_fork(struct task_struct *p)
 {
 	p->se.wait_start_fair		= 0;
-	p->se.wait_start		= 0;
 	p->se.exec_start		= 0;
 	p->se.sum_exec_runtime		= 0;
 	p->se.delta_exec		= 0;
 	p->se.delta_fair_run		= 0;
 	p->se.delta_fair_sleep		= 0;
 	p->se.wait_runtime		= 0;
+	p->se.sleep_start_fair		= 0;
+
+#ifdef CONFIG_SCHEDSTATS
+	p->se.wait_start		= 0;
 	p->se.sum_wait_runtime		= 0;
 	p->se.sum_sleep_runtime		= 0;
 	p->se.sleep_start		= 0;
-	p->se.sleep_start_fair		= 0;
 	p->se.block_start		= 0;
 	p->se.sleep_max			= 0;
 	p->se.block_max			= 0;
@@ -1586,6 +1578,7 @@ static void __sched_fork(struct task_struct *p)
 	p->se.wait_max			= 0;
 	p->se.wait_runtime_overruns	= 0;
 	p->se.wait_runtime_underruns	= 0;
+#endif
 
 	INIT_LIST_HEAD(&p->run_list);
 	p->se.on_rq = 0;
@@ -1654,22 +1647,27 @@ void fastcall wake_up_new_task(struct task_struct *p, unsigned long clone_flags)
 	unsigned long flags;
 	struct rq *rq;
 	int this_cpu;
+	u64 now;
 
 	rq = task_rq_lock(p, &flags);
 	BUG_ON(p->state != TASK_RUNNING);
 	this_cpu = smp_processor_id(); /* parent's CPU */
+	now = rq_clock(rq);
 
 	p->prio = effective_prio(p);
 
-	if (!sysctl_sched_child_runs_first || (clone_flags & CLONE_VM) ||
-			task_cpu(p) != this_cpu || !current->se.on_rq) {
+	if (!p->sched_class->task_new || !sysctl_sched_child_runs_first ||
+			(clone_flags & CLONE_VM) || task_cpu(p) != this_cpu ||
+			!current->se.on_rq) {
+
 		activate_task(rq, p, 0);
 	} else {
 		/*
 		 * Let the scheduling class do new task startup
 		 * management (if any):
 		 */
-		p->sched_class->task_new(rq, p);
+		p->sched_class->task_new(rq, p, now);
+		inc_nr_running(p, rq, now);
 	}
 	check_preempt_curr(rq, p);
 	task_rq_unlock(rq, &flags);
@@ -2908,8 +2906,7 @@ static void active_load_balance(struct rq *busiest_rq, int busiest_cpu)
 		schedstat_inc(sd, alb_cnt);
 
 		if (move_tasks(target_rq, target_cpu, busiest_rq, 1,
-			       RTPRIO_TO_LOAD_WEIGHT(100), sd, CPU_IDLE,
-			       NULL))
+			       ULONG_MAX, sd, CPU_IDLE, NULL))
 			schedstat_inc(sd, alb_pushed);
 		else
 			schedstat_inc(sd, alb_failed);
@@ -5269,8 +5266,6 @@ sd_alloc_ctl_domain_table(struct sched_domain *sd)
 		sizeof(int), 0644, proc_dointvec_minmax);
 	set_table_entry(&table[8], 9, "imbalance_pct", &sd->imbalance_pct,
 		sizeof(int), 0644, proc_dointvec_minmax);
-	set_table_entry(&table[9], 10, "cache_hot_time", &sd->cache_hot_time,
-		sizeof(long long), 0644, proc_doulongvec_minmax);
 	set_table_entry(&table[10], 11, "cache_nice_tries",
 		&sd->cache_nice_tries,
 		sizeof(int), 0644, proc_dointvec_minmax);
@@ -6590,12 +6585,14 @@ void normalize_rt_tasks(void)
 	do_each_thread(g, p) {
 		p->se.fair_key			= 0;
 		p->se.wait_runtime		= 0;
+		p->se.exec_start		= 0;
 		p->se.wait_start_fair		= 0;
+		p->se.sleep_start_fair		= 0;
+#ifdef CONFIG_SCHEDSTATS
 		p->se.wait_start		= 0;
-		p->se.exec_start		= 0;
 		p->se.sleep_start		= 0;
-		p->se.sleep_start_fair		= 0;
 		p->se.block_start		= 0;
+#endif
 		task_rq(p)->cfs.fair_clock	= 0;
 		task_rq(p)->clock		= 0;
 

kernel/sched_debug.c

@@ -44,11 +44,16 @@ print_task(struct seq_file *m, struct rq *rq, struct task_struct *p, u64 now)
 		(long long)p->se.wait_runtime,
 		(long long)(p->nvcsw + p->nivcsw),
 		p->prio,
+#ifdef CONFIG_SCHEDSTATS
 		(long long)p->se.sum_exec_runtime,
 		(long long)p->se.sum_wait_runtime,
 		(long long)p->se.sum_sleep_runtime,
 		(long long)p->se.wait_runtime_overruns,
-		(long long)p->se.wait_runtime_underruns);
+		(long long)p->se.wait_runtime_underruns
+#else
+		0LL, 0LL, 0LL, 0LL, 0LL
+#endif
+	);
 }
 
 static void print_rq(struct seq_file *m, struct rq *rq, int rq_cpu, u64 now)
@@ -171,7 +176,7 @@ static int sched_debug_show(struct seq_file *m, void *v)
 	u64 now = ktime_to_ns(ktime_get());
 	int cpu;
 
-	SEQ_printf(m, "Sched Debug Version: v0.05, %s %.*s\n",
+	SEQ_printf(m, "Sched Debug Version: v0.05-v20, %s %.*s\n",
 		init_utsname()->release,
 		(int)strcspn(init_utsname()->version, " "),
 		init_utsname()->version);
@@ -235,21 +240,24 @@ void proc_sched_show_task(struct task_struct *p, struct seq_file *m)
 #define P(F) \
 	SEQ_printf(m, "%-25s:%20Ld\n", #F, (long long)p->F)
 
-	P(se.wait_start);
+	P(se.wait_runtime);
 	P(se.wait_start_fair);
 	P(se.exec_start);
-	P(se.sleep_start);
 	P(se.sleep_start_fair);
+	P(se.sum_exec_runtime);
+
+#ifdef CONFIG_SCHEDSTATS
+	P(se.wait_start);
+	P(se.sleep_start);
 	P(se.block_start);
 	P(se.sleep_max);
 	P(se.block_max);
 	P(se.exec_max);
 	P(se.wait_max);
-	P(se.wait_runtime);
 	P(se.wait_runtime_overruns);
 	P(se.wait_runtime_underruns);
 	P(se.sum_wait_runtime);
-	P(se.sum_exec_runtime);
+#endif
 	SEQ_printf(m, "%-25s:%20Ld\n",
 		   "nr_switches", (long long)(p->nvcsw + p->nivcsw));
 	P(se.load.weight);
@@ -269,7 +277,9 @@ void proc_sched_show_task(struct task_struct *p, struct seq_file *m)
 
 void proc_sched_set_task(struct task_struct *p)
 {
+#ifdef CONFIG_SCHEDSTATS
 	p->se.sleep_max = p->se.block_max = p->se.exec_max = p->se.wait_max = 0;
 	p->se.wait_runtime_overruns = p->se.wait_runtime_underruns = 0;
+#endif
 	p->se.sum_exec_runtime = 0;
 }

kernel/sched_fair.c

@@ -292,10 +292,7 @@ __update_curr(struct cfs_rq *cfs_rq, struct sched_entity *curr, u64 now)
 		return;
 
 	delta_exec = curr->delta_exec;
-#ifdef CONFIG_SCHEDSTATS
-	if (unlikely(delta_exec > curr->exec_max))
-		curr->exec_max = delta_exec;
-#endif
+	schedstat_set(curr->exec_max, max((u64)delta_exec, curr->exec_max));
 
 	curr->sum_exec_runtime += delta_exec;
 	cfs_rq->exec_clock += delta_exec;
@@ -352,7 +349,7 @@ static inline void
 update_stats_wait_start(struct cfs_rq *cfs_rq, struct sched_entity *se, u64 now)
 {
 	se->wait_start_fair = cfs_rq->fair_clock;
-	se->wait_start = now;
+	schedstat_set(se->wait_start, now);
 }
 
 /*
@@ -425,13 +422,7 @@ __update_stats_wait_end(struct cfs_rq *cfs_rq, struct sched_entity *se, u64 now)
 {
 	unsigned long delta_fair = se->delta_fair_run;
 
-#ifdef CONFIG_SCHEDSTATS
-	{
-		s64 delta_wait = now - se->wait_start;
-		if (unlikely(delta_wait > se->wait_max))
-			se->wait_max = delta_wait;
-	}
-#endif
+	schedstat_set(se->wait_max, max(se->wait_max, now - se->wait_start));
 
 	if (unlikely(se->load.weight != NICE_0_LOAD))
 		delta_fair = calc_weighted(delta_fair, se->load.weight,
@@ -456,7 +447,7 @@ update_stats_wait_end(struct cfs_rq *cfs_rq, struct sched_entity *se, u64 now)
 	}
 
 	se->wait_start_fair = 0;
-	se->wait_start = 0;
+	schedstat_set(se->wait_start, 0);
 }
 
 static inline void
@@ -1041,11 +1032,10 @@ static void task_tick_fair(struct rq *rq, struct task_struct *curr)
  * monopolize the CPU. Note: the parent runqueue is locked,
  * the child is not running yet.
  */
-static void task_new_fair(struct rq *rq, struct task_struct *p)
+static void task_new_fair(struct rq *rq, struct task_struct *p, u64 now)
 {
 	struct cfs_rq *cfs_rq = task_cfs_rq(p);
 	struct sched_entity *se = &p->se;
-	u64 now = rq_clock(rq);
 
 	sched_info_queued(p);
 
@@ -1072,7 +1062,6 @@ static void task_new_fair(struct rq *rq, struct task_struct *p)
 		p->se.wait_runtime = -(sysctl_sched_granularity / 2);
 
 	__enqueue_entity(cfs_rq, se);
-	inc_nr_running(p, rq, now);
 }
 
 #ifdef CONFIG_FAIR_GROUP_SCHED

kernel/sched_rt.c

@@ -18,8 +18,8 @@ static inline void update_curr_rt(struct rq *rq, u64 now)
 	delta_exec = now - curr->se.exec_start;
 	if (unlikely((s64)delta_exec < 0))
 		delta_exec = 0;
-	if (unlikely(delta_exec > curr->se.exec_max))
-		curr->se.exec_max = delta_exec;
+
+	schedstat_set(curr->se.exec_max, max(curr->se.exec_max, delta_exec));
 
 	curr->se.sum_exec_runtime += delta_exec;
 	curr->se.exec_start = now;
@@ -229,15 +229,6 @@ static void task_tick_rt(struct rq *rq, struct task_struct *p)
 	requeue_task_rt(rq, p);
 }
 
-/*
- * No parent/child timeslice management necessary for RT tasks,
- * just activate them:
- */
-static void task_new_rt(struct rq *rq, struct task_struct *p)
-{
-	activate_task(rq, p, 1);
-}
-
 static struct sched_class rt_sched_class __read_mostly = {
 	.enqueue_task		= enqueue_task_rt,
 	.dequeue_task		= dequeue_task_rt,
@@ -251,5 +242,4 @@ static struct sched_class rt_sched_class __read_mostly = {
 	.load_balance		= load_balance_rt,
 
 	.task_tick		= task_tick_rt,
-	.task_new		= task_new_rt,
 };

kernel/sched_stats.h

@@ -116,6 +116,7 @@ rq_sched_info_depart(struct rq *rq, unsigned long long delta)
 }
 # define schedstat_inc(rq, field)	do { (rq)->field++; } while (0)
 # define schedstat_add(rq, field, amt)	do { (rq)->field += (amt); } while (0)
+# define schedstat_set(var, val)	do { var = (val); } while (0)
 #else /* !CONFIG_SCHEDSTATS */
 static inline void
 rq_sched_info_arrive(struct rq *rq, unsigned long long delta)
@@ -125,6 +126,7 @@ rq_sched_info_depart(struct rq *rq, unsigned long long delta)
 {}
 # define schedstat_inc(rq, field)	do { } while (0)
 # define schedstat_add(rq, field, amt)	do { } while (0)
+# define schedstat_set(var, val)	do { } while (0)
 #endif
 
 #if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)

net/netlabel/netlabel_user.c

@@ -113,8 +113,10 @@ struct audit_buffer *netlbl_audit_start_common(int type,
 	if (audit_info->secid != 0 &&
 	    security_secid_to_secctx(audit_info->secid,
 				     &secctx,
-				     &secctx_len) == 0)
+				     &secctx_len) == 0) {
 		audit_log_format(audit_buf, " subj=%s", secctx);
+		security_release_secctx(secctx, secctx_len);
+	}
 
 	return audit_buf;
 }

net/xfrm/xfrm_policy.c

@@ -2195,9 +2195,10 @@ void xfrm_audit_log(uid_t auid, u32 sid, int type, int result,
 	}
 
 	if (sid != 0 &&
-		security_secid_to_secctx(sid, &secctx, &secctx_len) == 0)
+	    security_secid_to_secctx(sid, &secctx, &secctx_len) == 0) {
 		audit_log_format(audit_buf, " subj=%s", secctx);
-	else
+		security_release_secctx(secctx, secctx_len);
+	} else
 		audit_log_task_context(audit_buf);
 
 	if (xp) {

security/selinux/hooks.c

@@ -4658,8 +4658,7 @@ static int selinux_secid_to_secctx(u32 secid, char **secdata, u32 *seclen)
 
 static void selinux_release_secctx(char *secdata, u32 seclen)
 {
-	if (secdata)
-		kfree(secdata);
+	kfree(secdata);
 }
 
 #ifdef CONFIG_KEYS

security/selinux/netlabel.c

@@ -162,9 +162,13 @@ int selinux_netlbl_skbuff_getsid(struct sk_buff *skb, u32 base_sid, u32 *sid)
 
 	netlbl_secattr_init(&secattr);
 	rc = netlbl_skbuff_getattr(skb, &secattr);
-	if (rc == 0 && secattr.flags != NETLBL_SECATTR_NONE)
+	if (rc == 0 && secattr.flags != NETLBL_SECATTR_NONE) {
 		rc = security_netlbl_secattr_to_sid(&secattr, base_sid, sid);
-	else
+		if (rc == 0 &&
+		    (secattr.flags & NETLBL_SECATTR_CACHEABLE) &&
+		    (secattr.flags & NETLBL_SECATTR_CACHE))
+			netlbl_cache_add(skb, &secattr);
+	} else
 		*sid = SECSID_NULL;
 	netlbl_secattr_destroy(&secattr);
 
@@ -307,11 +311,15 @@ int selinux_netlbl_sock_rcv_skb(struct sk_security_struct *sksec,
 
 	netlbl_secattr_init(&secattr);
 	rc = netlbl_skbuff_getattr(skb, &secattr);
-	if (rc == 0 && secattr.flags != NETLBL_SECATTR_NONE)
+	if (rc == 0 && secattr.flags != NETLBL_SECATTR_NONE) {
 		rc = security_netlbl_secattr_to_sid(&secattr,
 						    SECINITSID_NETMSG,
 						    &nlbl_sid);
-	else
+		if (rc == 0 &&
+		    (secattr.flags & NETLBL_SECATTR_CACHEABLE) &&
+		    (secattr.flags & NETLBL_SECATTR_CACHE))
+			netlbl_cache_add(skb, &secattr);
+	} else
 		nlbl_sid = SECINITSID_UNLABELED;
 	netlbl_secattr_destroy(&secattr);
 	if (rc != 0)