[PATCH] sd: SD 4-bit bus

Infrastructure for 4-bit bus transfers with SD cards.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

drivers/mmc/mmc.c

@@ -335,6 +335,40 @@ static int mmc_select_card(struct mmc_host *host, struct mmc_card *card)
 	if (err != MMC_ERR_NONE)
 		return err;
 
+	/*
+	 * Default bus width is 1 bit.
+	 */
+	host->ios.bus_width = MMC_BUS_WIDTH_1;
+
+	/*
+	 * We can only change the bus width of the selected
+	 * card so therefore we have to put the handling
+	 * here.
+	 */
+	if (host->caps & MMC_CAP_4_BIT_DATA) {
+		/*
+		 * The card is in 1 bit mode by default so
+		 * we only need to change if it supports the
+		 * wider version.
+		 */
+		if (mmc_card_sd(card) &&
+			(card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) {
+			struct mmc_command cmd;
+			cmd.opcode = SD_APP_SET_BUS_WIDTH;
+			cmd.arg = SD_BUS_WIDTH_4;
+			cmd.flags = MMC_RSP_R1;
+
+			err = mmc_wait_for_app_cmd(host, card->rca, &cmd,
+				CMD_RETRIES);
+			if (err != MMC_ERR_NONE)
+				return err;
+
+			host->ios.bus_width = MMC_BUS_WIDTH_4;
+		}
+	}
+
+	host->ops->set_ios(host, &host->ios);
+
 	return MMC_ERR_NONE;
 }
 
@@ -653,6 +687,7 @@ static void mmc_power_up(struct mmc_host *host)
 	host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
 	host->ios.chip_select = MMC_CS_DONTCARE;
 	host->ios.power_mode = MMC_POWER_UP;
+	host->ios.bus_width = MMC_BUS_WIDTH_1;
 	host->ops->set_ios(host, &host->ios);
 
 	mmc_delay(1);
@@ -671,6 +706,7 @@ static void mmc_power_off(struct mmc_host *host)
 	host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
 	host->ios.chip_select = MMC_CS_DONTCARE;
 	host->ios.power_mode = MMC_POWER_OFF;
+	host->ios.bus_width = MMC_BUS_WIDTH_1;
 	host->ops->set_ios(host, &host->ios);
 }
 

include/linux/mmc/host.h

@@ -57,6 +57,11 @@ struct mmc_ios {
 #define MMC_POWER_OFF		0
 #define MMC_POWER_UP		1
 #define MMC_POWER_ON		2
+
+	unsigned char	bus_width;		/* data bus width */
+
+#define MMC_BUS_WIDTH_1		0
+#define MMC_BUS_WIDTH_4		2
 };
 
 struct mmc_host_ops {
@@ -77,6 +82,10 @@ struct mmc_host {
 	unsigned int		f_max;
 	u32			ocr_avail;
 
+	unsigned long		caps;		/* Host capabilities */
+
+#define MMC_CAP_4_BIT_DATA	(1 << 0)	/* Can the host do 4 bit transfers */
+
 	/* host specific block data */
 	unsigned int		max_seg_size;	/* see blk_queue_max_segment_size */
 	unsigned short		max_hw_segs;	/* see blk_queue_max_hw_segments */

include/linux/mmc/protocol.h

@@ -236,5 +236,12 @@ struct _mmc_csd {
 #define CSD_SPEC_VER_2      2           /* Implements system specification 2.0 - 2.2 */
 #define CSD_SPEC_VER_3      3           /* Implements system specification 3.1 */
 
+
+/*
+ * SD bus widths
+ */
+#define SD_BUS_WIDTH_1      0
+#define SD_BUS_WIDTH_4      2
+
 #endif  /* MMC_MMC_PROTOCOL_H */