Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (141 commits)
  MIPS: Alchemy: defconfig updates
  MIPS: Alchemy: Fix Au1100 ethernet build failure
  MIPS: Alchemy: Repair db1500/bosporus builds
  MIPS: ARC: Cleanup unused definitions from sgialib.h
  MIPS: Cobalt: convert legacy port addresses to GT-64111 bus addresses
  MIPS: Alchemy: use 36bit addresses for PCMCIA resources.
  MIPS: Cobalt: Fix theoretical port aliasing issue
  MIPS: Use ALIGN(x, bytes) instead of __ALIGN_MASK(x, bytes - 1)
  MIPS: Crazy spinlock speed test.
  MIPS: Optimize spinlocks.
  MIPS: Alchemy: devboard PM needs to save CPLD registers.
  MIPS: PowerTV: Eliminate duplicate opcode definition macros
  MIPS: Lemote 2F: Move printks out of port_access_lock.
  MIPS: PNX833x: Convert IRQ controller locks to raw spinlocks.
  MIPS: Octeon: Replace spinlock with raw_spinlocks in dma-octeon.c.
  MIPS: Octeon: Replace rwlocks in irq_chip handlers with raw_spinlocks.
  MIPS: Octeon: Convert octeon_irq_msi_lock to raw spinlock.
  MIPS: Loongson: Remove pointless sample_lock from oprofile code.
  MIPS: SNI: Convert sni_rm200_i8259A_lock to raw spinlock.
  MIPS: i8259: Convert IRQ controller lock to raw spinlock.
  ...

arch/mips/Kconfig

@@ -41,7 +41,7 @@ config AR7
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_ZBOOT_UART16550
-	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	select GCD
 	select VLYNQ
 	help
@@ -180,7 +180,7 @@ config LASAT
 
 config MACH_LOONGSON
 	bool "Loongson family of machines"
-	select SYS_SUPPORTS_ZBOOT_UART16550
+	select SYS_SUPPORTS_ZBOOT
 	help
 	  This enables the support of Loongson family of machines.
 
@@ -1295,7 +1295,6 @@ config CPU_CAVIUM_OCTEON
 	select SYS_SUPPORTS_SMP
 	select NR_CPUS_DEFAULT_16
 	select WEAK_ORDERING
-	select WEAK_REORDERING_BEYOND_LLSC
 	select CPU_SUPPORTS_HIGHMEM
 	select CPU_SUPPORTS_HUGEPAGES
 	help
@@ -1726,6 +1725,9 @@ config SB1_PASS_2_1_WORKAROUNDS
 config 64BIT_PHYS_ADDR
 	bool
 
+config ARCH_PHYS_ADDR_T_64BIT
+       def_bool 64BIT_PHYS_ADDR
+
 config CPU_HAS_SMARTMIPS
 	depends on SYS_SUPPORTS_SMARTMIPS
 	bool "Support for the SmartMIPS ASE"

arch/mips/Kconfig.debug

@@ -102,4 +102,30 @@ config RUNTIME_DEBUG
 	  arch/mips/include/asm/debug.h for debugging macros.
 	  If unsure, say N.
 
+config DEBUG_ZBOOT
+	bool "Enable compressed kernel support debugging"
+	depends on DEBUG_KERNEL && SYS_SUPPORTS_ZBOOT
+	default n
+	help
+	  If you want to add compressed kernel support to a new board, and the
+	  board supports uart16550 compatible serial port, please select
+	  SYS_SUPPORTS_ZBOOT_UART16550 for your board and enable this option to
+	  debug it.
+
+	  If your board doesn't support uart16550 compatible serial port, you
+	  can try to select SYS_SUPPORTS_ZBOOT and use the other methods to
+	  debug it. for example, add a new serial port support just as
+	  arch/mips/boot/compressed/uart-16550.c does.
+
+	  After the compressed kernel support works, please disable this option
+	  to reduce the kernel image size and speed up the booting procedure a
+	  little.
+
+config SPINLOCK_TEST
+	bool "Enable spinlock timing tests in debugfs"
+	depends on DEBUG_FS
+	default n
+	help
+	  Add several files to the debugfs to test spinlock speed.
+
 endmenu

arch/mips/Makefile

@@ -184,6 +184,15 @@ libs-$(CONFIG_CFE)		+= arch/mips/fw/cfe/
 libs-$(CONFIG_SNIPROM)		+= arch/mips/fw/sni/
 libs-y				+= arch/mips/fw/lib/
 
+#
+# Kernel compression
+#
+ifdef SYS_SUPPORTS_ZBOOT
+COMPRESSION_FNAME		= vmlinuz
+else
+COMPRESSION_FNAME		= vmlinux
+endif
+
 #
 # Board-dependent options and extra files
 #
@@ -332,11 +341,11 @@ load-$(CONFIG_WR_PPMC)		+= 0xffffffff80100000
 #
 # Loongson family
 #
-core-$(CONFIG_MACH_LOONGSON) +=arch/mips/loongson/
+core-$(CONFIG_MACH_LOONGSON) += arch/mips/loongson/
 cflags-$(CONFIG_MACH_LOONGSON) += -I$(srctree)/arch/mips/include/asm/mach-loongson \
                     -mno-branch-likely
-load-$(CONFIG_LEMOTE_FULOONG2E) +=0xffffffff80100000
-load-$(CONFIG_LEMOTE_MACH2F) +=0xffffffff80200000
+load-$(CONFIG_LEMOTE_FULOONG2E) += 0xffffffff80100000
+load-$(CONFIG_LEMOTE_MACH2F) += 0xffffffff80200000
 
 #
 # MIPS Malta board
@@ -344,7 +353,7 @@ load-$(CONFIG_LEMOTE_MACH2F) +=0xffffffff80200000
 core-$(CONFIG_MIPS_MALTA)	+= arch/mips/mti-malta/
 cflags-$(CONFIG_MIPS_MALTA)	+= -I$(srctree)/arch/mips/include/asm/mach-malta
 load-$(CONFIG_MIPS_MALTA)	+= 0xffffffff80100000
-all-$(CONFIG_MIPS_MALTA)	:= vmlinuz.bin
+all-$(CONFIG_MIPS_MALTA)	:= $(COMPRESSION_FNAME).bin
 
 #
 # MIPS SIM
@@ -594,7 +603,7 @@ load-$(CONFIG_SNI_RM)		+= 0xffffffff80600000
 else
 load-$(CONFIG_SNI_RM)		+= 0xffffffff80030000
 endif
-all-$(CONFIG_SNI_RM)		:= vmlinuz.ecoff
+all-$(CONFIG_SNI_RM)		:= $(COMPRESSION_FNAME).ecoff
 
 #
 # Common TXx9

arch/mips/alchemy/Kconfig

@@ -1,5 +1,5 @@
-# au1000-style gpio
-config ALCHEMY_GPIO_AU1000
+# au1000-style gpio and interrupt controllers
+config ALCHEMY_GPIOINT_AU1000
 	bool
 
 # select this in your board config if you don't want to use the gpio
@@ -20,12 +20,14 @@ config MIPS_MTX1
 	select HW_HAS_PCI
 	select SOC_AU1500
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_BOSPORUS
 	bool "Alchemy Bosporus board"
 	select SOC_AU1500
 	select DMA_NONCOHERENT
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_DB1000
 	bool "Alchemy DB1000 board"
@@ -33,12 +35,14 @@ config MIPS_DB1000
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_DB1100
 	bool "Alchemy DB1100 board"
 	select SOC_AU1100
 	select DMA_NONCOHERENT
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_DB1200
 	bool "Alchemy DB1200 board"
@@ -46,6 +50,7 @@ config MIPS_DB1200
 	select DMA_COHERENT
 	select MIPS_DISABLE_OBSOLETE_IDE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_DB1500
 	bool "Alchemy DB1500 board"
@@ -55,6 +60,7 @@ config MIPS_DB1500
 	select MIPS_DISABLE_OBSOLETE_IDE
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_DB1550
 	bool "Alchemy DB1550 board"
@@ -63,12 +69,14 @@ config MIPS_DB1550
 	select DMA_NONCOHERENT
 	select MIPS_DISABLE_OBSOLETE_IDE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_MIRAGE
 	bool "Alchemy Mirage board"
 	select DMA_NONCOHERENT
 	select SOC_AU1500
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_PB1000
 	bool "Alchemy PB1000 board"
@@ -77,6 +85,7 @@ config MIPS_PB1000
 	select HW_HAS_PCI
 	select SWAP_IO_SPACE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_PB1100
 	bool "Alchemy PB1100 board"
@@ -85,6 +94,7 @@ config MIPS_PB1100
 	select HW_HAS_PCI
 	select SWAP_IO_SPACE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_PB1200
 	bool "Alchemy PB1200 board"
@@ -92,6 +102,7 @@ config MIPS_PB1200
 	select DMA_NONCOHERENT
 	select MIPS_DISABLE_OBSOLETE_IDE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_PB1500
 	bool "Alchemy PB1500 board"
@@ -99,6 +110,7 @@ config MIPS_PB1500
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_PB1550
 	bool "Alchemy PB1550 board"
@@ -107,39 +119,41 @@ config MIPS_PB1550
 	select HW_HAS_PCI
 	select MIPS_DISABLE_OBSOLETE_IDE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
 
 config MIPS_XXS1500
 	bool "MyCable XXS1500 board"
 	select DMA_NONCOHERENT
 	select SOC_AU1500
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_HAS_EARLY_PRINTK
 
 endchoice
 
 config SOC_AU1000
 	bool
 	select SOC_AU1X00
-	select ALCHEMY_GPIO_AU1000
+	select ALCHEMY_GPIOINT_AU1000
 
 config SOC_AU1100
 	bool
 	select SOC_AU1X00
-	select ALCHEMY_GPIO_AU1000
+	select ALCHEMY_GPIOINT_AU1000
 
 config SOC_AU1500
 	bool
 	select SOC_AU1X00
-	select ALCHEMY_GPIO_AU1000
+	select ALCHEMY_GPIOINT_AU1000
 
 config SOC_AU1550
 	bool
 	select SOC_AU1X00
-	select ALCHEMY_GPIO_AU1000
+	select ALCHEMY_GPIOINT_AU1000
 
 config SOC_AU1200
 	bool
 	select SOC_AU1X00
-	select ALCHEMY_GPIO_AU1000
+	select ALCHEMY_GPIOINT_AU1000
 
 config SOC_AU1X00
 	bool

arch/mips/alchemy/common/Makefile

@@ -5,14 +5,15 @@
 # Makefile for the Alchemy Au1xx0 CPUs, generic files.
 #
 
-obj-y += prom.o irq.o puts.o time.o reset.o \
-	clocks.o platform.o power.o setup.o \
+obj-y += prom.o time.o clocks.o platform.o power.o setup.o \
 	sleeper.o dma.o dbdma.o
 
+obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += irq.o
+
 # optional gpiolib support
 ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),)
  ifeq ($(CONFIG_GPIOLIB),y)
-  obj-$(CONFIG_ALCHEMY_GPIO_AU1000) += gpiolib-au1000.o
+  obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += gpiolib-au1000.o
  endif
 endif
 

arch/mips/alchemy/common/clocks.c

@@ -40,8 +40,6 @@
 static unsigned int au1x00_clock; /*  Hz */
 static unsigned long uart_baud_base;
 
-static DEFINE_SPINLOCK(time_lock);
-
 /*
  * Set the au1000_clock
  */
@@ -84,9 +82,6 @@ void set_au1x00_uart_baud_base(unsigned long new_baud_base)
 unsigned long au1xxx_calc_clock(void)
 {
 	unsigned long cpu_speed;
-	unsigned long flags;
-
-	spin_lock_irqsave(&time_lock, flags);
 
 	/*
 	 * On early Au1000, sys_cpupll was write-only. Since these
@@ -108,8 +103,6 @@ unsigned long au1xxx_calc_clock(void)
 	set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)
 							  & 0x03) + 2) * 16));
 
-	spin_unlock_irqrestore(&time_lock, flags);
-
 	set_au1x00_speed(cpu_speed);
 
 	return cpu_speed;

arch/mips/alchemy/common/dbdma.c

@@ -30,6 +30,7 @@
  *
  */
 
+#include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
@@ -58,7 +59,6 @@ static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock);
 
 static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
 static int dbdma_initialized;
-static void au1xxx_dbdma_init(void);
 
 static dbdev_tab_t dbdev_tab[] = {
 #ifdef CONFIG_SOC_AU1550
@@ -237,7 +237,7 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
        void (*callback)(int, void *), void *callparam)
 {
 	unsigned long   flags;
-	u32		used, chan, rv;
+	u32		used, chan;
 	u32		dcp;
 	int		i;
 	dbdev_tab_t	*stp, *dtp;
@@ -250,8 +250,7 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
 	 * which can't be done successfully during board set up.
 	 */
 	if (!dbdma_initialized)
-		au1xxx_dbdma_init();
-	dbdma_initialized = 1;
+		return 0;
 
 	stp = find_dbdev_id(srcid);
 	if (stp == NULL)
@@ -261,7 +260,6 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
 		return 0;
 
 	used = 0;
-	rv = 0;
 
 	/* Check to see if we can get both channels. */
 	spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
@@ -282,63 +280,65 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
 		used++;
 	spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
 
-	if (!used) {
-		/* Let's see if we can allocate a channel for it. */
-		ctp = NULL;
-		chan = 0;
-		spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
-		for (i = 0; i < NUM_DBDMA_CHANS; i++)
-			if (chan_tab_ptr[i] == NULL) {
-				/*
-				 * If kmalloc fails, it is caught below same
-				 * as a channel not available.
-				 */
-				ctp = kmalloc(sizeof(chan_tab_t), GFP_ATOMIC);
-				chan_tab_ptr[i] = ctp;
-				break;
-			}
-		spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
-
-		if (ctp != NULL) {
-			memset(ctp, 0, sizeof(chan_tab_t));
-			ctp->chan_index = chan = i;
-			dcp = DDMA_CHANNEL_BASE;
-			dcp += (0x0100 * chan);
-			ctp->chan_ptr = (au1x_dma_chan_t *)dcp;
-			cp = (au1x_dma_chan_t *)dcp;
-			ctp->chan_src = stp;
-			ctp->chan_dest = dtp;
-			ctp->chan_callback = callback;
-			ctp->chan_callparam = callparam;
-
-			/* Initialize channel configuration. */
-			i = 0;
-			if (stp->dev_intlevel)
-				i |= DDMA_CFG_SED;
-			if (stp->dev_intpolarity)
-				i |= DDMA_CFG_SP;
-			if (dtp->dev_intlevel)
-				i |= DDMA_CFG_DED;
-			if (dtp->dev_intpolarity)
-				i |= DDMA_CFG_DP;
-			if ((stp->dev_flags & DEV_FLAGS_SYNC) ||
-				(dtp->dev_flags & DEV_FLAGS_SYNC))
-					i |= DDMA_CFG_SYNC;
-			cp->ddma_cfg = i;
-			au_sync();
+	if (used)
+		return 0;
 
-			/* Return a non-zero value that can be used to
-			 * find the channel information in subsequent
-			 * operations.
+	/* Let's see if we can allocate a channel for it. */
+	ctp = NULL;
+	chan = 0;
+	spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
+	for (i = 0; i < NUM_DBDMA_CHANS; i++)
+		if (chan_tab_ptr[i] == NULL) {
+			/*
+			 * If kmalloc fails, it is caught below same
+			 * as a channel not available.
 			 */
-			rv = (u32)(&chan_tab_ptr[chan]);
-		} else {
-			/* Release devices */
-			stp->dev_flags &= ~DEV_FLAGS_INUSE;
-			dtp->dev_flags &= ~DEV_FLAGS_INUSE;
+			ctp = kmalloc(sizeof(chan_tab_t), GFP_ATOMIC);
+			chan_tab_ptr[i] = ctp;
+			break;
 		}
+	spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
+
+	if (ctp != NULL) {
+		memset(ctp, 0, sizeof(chan_tab_t));
+		ctp->chan_index = chan = i;
+		dcp = DDMA_CHANNEL_BASE;
+		dcp += (0x0100 * chan);
+		ctp->chan_ptr = (au1x_dma_chan_t *)dcp;
+		cp = (au1x_dma_chan_t *)dcp;
+		ctp->chan_src = stp;
+		ctp->chan_dest = dtp;
+		ctp->chan_callback = callback;
+		ctp->chan_callparam = callparam;
+
+		/* Initialize channel configuration. */
+		i = 0;
+		if (stp->dev_intlevel)
+			i |= DDMA_CFG_SED;
+		if (stp->dev_intpolarity)
+			i |= DDMA_CFG_SP;
+		if (dtp->dev_intlevel)
+			i |= DDMA_CFG_DED;
+		if (dtp->dev_intpolarity)
+			i |= DDMA_CFG_DP;
+		if ((stp->dev_flags & DEV_FLAGS_SYNC) ||
+			(dtp->dev_flags & DEV_FLAGS_SYNC))
+				i |= DDMA_CFG_SYNC;
+		cp->ddma_cfg = i;
+		au_sync();
+
+		/*
+		 * Return a non-zero value that can be used to find the channel
+		 * information in subsequent operations.
+		 */
+		return (u32)(&chan_tab_ptr[chan]);
 	}
-	return rv;
+
+	/* Release devices */
+	stp->dev_flags &= ~DEV_FLAGS_INUSE;
+	dtp->dev_flags &= ~DEV_FLAGS_INUSE;
+
+	return 0;
 }
 EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc);
 
@@ -572,7 +572,7 @@ EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc);
  * This updates the source pointer and byte count.  Normally used
  * for memory to fifo transfers.
  */
-u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
+u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
 {
 	chan_tab_t		*ctp;
 	au1x_ddma_desc_t	*dp;
@@ -598,7 +598,7 @@ u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
 		return 0;
 
 	/* Load up buffer address and byte count. */
-	dp->dscr_source0 = virt_to_phys(buf);
+	dp->dscr_source0 = buf & ~0UL;
 	dp->dscr_cmd1 = nbytes;
 	/* Check flags */
 	if (flags & DDMA_FLAGS_IE)
@@ -625,14 +625,13 @@ u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
 	/* Return something non-zero. */
 	return nbytes;
 }
-EXPORT_SYMBOL(_au1xxx_dbdma_put_source);
+EXPORT_SYMBOL(au1xxx_dbdma_put_source);
 
 /* Put a destination buffer into the DMA ring.
  * This updates the destination pointer and byte count.  Normally used
  * to place an empty buffer into the ring for fifo to memory transfers.
  */
-u32
-_au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags)
+u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags)
 {
 	chan_tab_t		*ctp;
 	au1x_ddma_desc_t	*dp;
@@ -662,7 +661,7 @@ _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags)
 	if (flags & DDMA_FLAGS_NOIE)
 		dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
 
-	dp->dscr_dest0 = virt_to_phys(buf);
+	dp->dscr_dest0 = buf & ~0UL;
 	dp->dscr_cmd1 = nbytes;
 #if 0
 	printk(KERN_DEBUG "cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
@@ -688,7 +687,7 @@ _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags)
 	/* Return something non-zero. */
 	return nbytes;
 }
-EXPORT_SYMBOL(_au1xxx_dbdma_put_dest);
+EXPORT_SYMBOL(au1xxx_dbdma_put_dest);
 
 /*
  * Get a destination buffer into the DMA ring.
@@ -871,28 +870,6 @@ static irqreturn_t dbdma_interrupt(int irq, void *dev_id)
 	return IRQ_RETVAL(1);
 }
 
-static void au1xxx_dbdma_init(void)
-{
-	int irq_nr;
-
-	dbdma_gptr->ddma_config = 0;
-	dbdma_gptr->ddma_throttle = 0;
-	dbdma_gptr->ddma_inten = 0xffff;
-	au_sync();
-
-#if defined(CONFIG_SOC_AU1550)
-	irq_nr = AU1550_DDMA_INT;
-#elif defined(CONFIG_SOC_AU1200)
-	irq_nr = AU1200_DDMA_INT;
-#else
-	#error Unknown Au1x00 SOC
-#endif
-
-	if (request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED,
-			"Au1xxx dbdma", (void *)dbdma_gptr))
-		printk(KERN_ERR "Can't get 1550 dbdma irq");
-}
-
 void au1xxx_dbdma_dump(u32 chanid)
 {
 	chan_tab_t	 *ctp;
@@ -906,7 +883,7 @@ void au1xxx_dbdma_dump(u32 chanid)
 	dtp = ctp->chan_dest;
 	cp = ctp->chan_ptr;
 
-	printk(KERN_DEBUG "Chan %x, stp %x (dev %d)  dtp %x (dev %d) \n",
+	printk(KERN_DEBUG "Chan %x, stp %x (dev %d)  dtp %x (dev %d)\n",
 			  (u32)ctp, (u32)stp, stp - dbdev_tab, (u32)dtp,
 			  dtp - dbdev_tab);
 	printk(KERN_DEBUG "desc base %x, get %x, put %x, cur %x\n",
@@ -1041,4 +1018,38 @@ void au1xxx_dbdma_resume(void)
 	}
 }
 #endif	/* CONFIG_PM */
+
+static int __init au1xxx_dbdma_init(void)
+{
+	int irq_nr, ret;
+
+	dbdma_gptr->ddma_config = 0;
+	dbdma_gptr->ddma_throttle = 0;
+	dbdma_gptr->ddma_inten = 0xffff;
+	au_sync();
+
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1550:
+		irq_nr = AU1550_DDMA_INT;
+		break;
+	case ALCHEMY_CPU_AU1200:
+		irq_nr = AU1200_DDMA_INT;
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	ret = request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED,
+			"Au1xxx dbdma", (void *)dbdma_gptr);
+	if (ret)
+		printk(KERN_ERR "Cannot grab DBDMA interrupt!\n");
+	else {
+		dbdma_initialized = 1;
+		printk(KERN_INFO "Alchemy DBDMA initialized\n");
+	}
+
+	return ret;
+}
+subsys_initcall(au1xxx_dbdma_init);
+
 #endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */

arch/mips/alchemy/common/dma.c

@@ -29,6 +29,8 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  *
  */
+
+#include <linux/init.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -188,17 +190,14 @@ int request_au1000_dma(int dev_id, const char *dev_str,
 		dev = &dma_dev_table[dev_id];
 
 	if (irqhandler) {
-		chan->irq = AU1000_DMA_INT_BASE + i;
 		chan->irq_dev = irq_dev_id;
 		ret = request_irq(chan->irq, irqhandler, irqflags, dev_str,
 				  chan->irq_dev);
 		if (ret) {
-			chan->irq = 0;
 			chan->irq_dev = NULL;
 			return ret;
 		}
 	} else {
-		chan->irq = 0;
 		chan->irq_dev = NULL;
 	}
 
@@ -226,13 +225,40 @@ void free_au1000_dma(unsigned int dmanr)
 	}
 
 	disable_dma(dmanr);
-	if (chan->irq)
+	if (chan->irq_dev)
 		free_irq(chan->irq, chan->irq_dev);
 
-	chan->irq = 0;
 	chan->irq_dev = NULL;
 	chan->dev_id = -1;
 }
 EXPORT_SYMBOL(free_au1000_dma);
 
+static int __init au1000_dma_init(void)
+{
+        int base, i;
+
+        switch (alchemy_get_cputype()) {
+        case ALCHEMY_CPU_AU1000:
+                base = AU1000_DMA_INT_BASE;
+                break;
+        case ALCHEMY_CPU_AU1500:
+                base = AU1500_DMA_INT_BASE;
+                break;
+        case ALCHEMY_CPU_AU1100:
+                base = AU1100_DMA_INT_BASE;
+                break;
+        default:
+                goto out;
+        }
+
+        for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++)
+                au1000_dma_table[i].irq = base + i;
+
+        printk(KERN_INFO "Alchemy DMA initialized\n");
+
+out:
+        return 0;
+}
+arch_initcall(au1000_dma_init);
+
 #endif /* AU1000 AU1500 AU1100 */

arch/mips/alchemy/common/gpiolib-au1000.c

@@ -36,7 +36,6 @@
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/gpio.h>
 
-#if !defined(CONFIG_SOC_AU1000)
 static int gpio2_get(struct gpio_chip *chip, unsigned offset)
 {
 	return alchemy_gpio2_get_value(offset + ALCHEMY_GPIO2_BASE);
@@ -63,7 +62,7 @@ static int gpio2_to_irq(struct gpio_chip *chip, unsigned offset)
 {
 	return alchemy_gpio2_to_irq(offset + ALCHEMY_GPIO2_BASE);
 }
-#endif /* !defined(CONFIG_SOC_AU1000) */
+
 
 static int gpio1_get(struct gpio_chip *chip, unsigned offset)
 {
@@ -104,7 +103,6 @@ struct gpio_chip alchemy_gpio_chip[] = {
 		.base			= ALCHEMY_GPIO1_BASE,
 		.ngpio			= ALCHEMY_GPIO1_NUM,
 	},
-#if !defined(CONFIG_SOC_AU1000)
 	[1] = {
 		.label                  = "alchemy-gpio2",
 		.direction_input        = gpio2_direction_input,
@@ -115,15 +113,13 @@ struct gpio_chip alchemy_gpio_chip[] = {
 		.base                   = ALCHEMY_GPIO2_BASE,
 		.ngpio                  = ALCHEMY_GPIO2_NUM,
 	},
-#endif
 };
 
 static int __init alchemy_gpiolib_init(void)
 {
 	gpiochip_add(&alchemy_gpio_chip[0]);
-#if !defined(CONFIG_SOC_AU1000)
-	gpiochip_add(&alchemy_gpio_chip[1]);
-#endif
+	if (alchemy_get_cputype() != ALCHEMY_CPU_AU1000)
+		gpiochip_add(&alchemy_gpio_chip[1]);
 
 	return 0;
 }

arch/mips/alchemy/common/irq.c

@@ -39,168 +39,180 @@
 
 static int au1x_ic_settype(unsigned int irq, unsigned int flow_type);
 
+/* NOTE on interrupt priorities: The original writers of this code said:
+ *
+ * Because of the tight timing of SETUP token to reply transactions,
+ * the USB devices-side packet complete interrupt (USB_DEV_REQ_INT)
+ * needs the highest priority.
+ */
+
 /* per-processor fixed function irqs */
-struct au1xxx_irqmap au1xxx_ic0_map[] __initdata = {
-
-#if defined(CONFIG_SOC_AU1000)
-	{ AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
-	{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
-	{ AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
-
-#elif defined(CONFIG_SOC_AU1500)
-
-	{ AU1500_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 },
-	{ AU1000_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 },
-	{ AU1500_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 },
-	{ AU1000_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 },
-	{ AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
-	{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
-	{ AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1500_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1500_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
-
-#elif defined(CONFIG_SOC_AU1100)
-
-	{ AU1100_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1100_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1100_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1100_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
-	{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+struct au1xxx_irqmap {
+	int im_irq;
+	int im_type;
+	int im_request;		/* set 1 to get higher priority */
+};
+
+struct au1xxx_irqmap au1000_irqmap[] __initdata = {
+	{ AU1000_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_UART2_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_SSI0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_SSI1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1 },
+	{ AU1000_IRDA_TX_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_IRDA_RX_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  1 },
 	{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
-	{ AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1100_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1100_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
-
-#elif defined(CONFIG_SOC_AU1550)
-
-	{ AU1550_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1550_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 },
-	{ AU1550_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 },
-	{ AU1550_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1550_CRYPTO_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1550_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 },
-	{ AU1550_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 },
-	{ AU1550_PCI_RST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
-	{ AU1550_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1550_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1550_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1550_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1550_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1550_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
-	{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   0 },
+	{ AU1000_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1000_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ -1, },
+};
+
+struct au1xxx_irqmap au1500_irqmap[] __initdata = {
+	{ AU1500_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1500_PCI_INTA,	  IRQ_TYPE_LEVEL_LOW,   0 },
+	{ AU1500_PCI_INTB,	  IRQ_TYPE_LEVEL_LOW,   0 },
+	{ AU1500_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1500_PCI_INTC,	  IRQ_TYPE_LEVEL_LOW,   0 },
+	{ AU1500_PCI_INTD,	  IRQ_TYPE_LEVEL_LOW,   0 },
+	{ AU1500_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1500_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1500_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1500_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1500_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1500_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1500_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1500_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1500_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1500_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1500_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1500_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1500_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1500_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1500_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1500_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1 },
+	{ AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  1 },
+	{ AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1500_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   0 },
+	{ AU1500_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1500_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1500_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1500_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ -1, },
+};
+
+struct au1xxx_irqmap au1100_irqmap[] __initdata = {
+	{ AU1100_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_SD_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_SSI0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_SSI1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1100_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1100_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1100_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1100_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1100_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1100_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1100_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1 },
+	{ AU1100_IRDA_TX_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_IRDA_RX_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  1 },
+	{ AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1100_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   0 },
+	{ AU1100_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1100_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_LCD_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1100_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ -1, },
+};
+
+struct au1xxx_irqmap au1550_irqmap[] __initdata = {
+	{ AU1550_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1550_PCI_INTA,	  IRQ_TYPE_LEVEL_LOW,   0 },
+	{ AU1550_PCI_INTB,	  IRQ_TYPE_LEVEL_LOW,   0 },
+	{ AU1550_DDMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1550_CRYPTO_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1550_PCI_INTC,	  IRQ_TYPE_LEVEL_LOW,   0 },
+	{ AU1550_PCI_INTD,	  IRQ_TYPE_LEVEL_LOW,   0 },
+	{ AU1550_PCI_RST_INT,	  IRQ_TYPE_LEVEL_LOW,   0 },
+	{ AU1550_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1550_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1550_PSC0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1550_PSC1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1550_PSC2_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1550_PSC3_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1550_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1550_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1550_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1550_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1550_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1550_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1550_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1550_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1 },
+	{ AU1550_NAND_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,  1 },
 	{ AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1550_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
-	{ AU1550_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1550_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-
-#elif defined(CONFIG_SOC_AU1200)
-
-	{ AU1200_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1200_SWT_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1200_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1200_MAE_BE_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1200_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1200_MAE_FE_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1200_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1200_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1200_AES_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1200_CAMERA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
-	{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 },
-	{ AU1200_USB_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1200_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-	{ AU1200_MAE_BOTH_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
-
-#else
-#error "Error: Unknown Alchemy SOC"
-#endif
+	{ AU1550_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,   0 },
+	{ AU1550_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1550_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ -1, },
+};
+
+struct au1xxx_irqmap au1200_irqmap[] __initdata = {
+	{ AU1200_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1200_SWT_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1200_SD_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1200_DDMA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1200_MAE_BE_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1200_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1200_MAE_FE_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1200_PSC0_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1200_PSC1_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1200_AES_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1200_CAMERA_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1200_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1200_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1200_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1200_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1200_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1200_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1200_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1200_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1 },
+	{ AU1200_NAND_INT,	  IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1200_USB_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1200_LCD_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ AU1200_MAE_BOTH_INT,	  IRQ_TYPE_LEVEL_HIGH,  0 },
+	{ -1, },
 };
 
 
@@ -306,7 +318,7 @@ static void au1x_ic1_unmask(unsigned int irq_nr)
  * nowhere in the current kernel sources is it disabled.	--mlau
  */
 #if defined(CONFIG_MIPS_PB1000)
-	if (irq_nr == AU1000_GPIO_15)
+	if (irq_nr == AU1000_GPIO15_INT)
 		au_writel(0x4000, PB1000_MDR); /* enable int */
 #endif
 	au_sync();
@@ -378,11 +390,13 @@ static void au1x_ic1_maskack(unsigned int irq_nr)
 
 static int au1x_ic1_setwake(unsigned int irq, unsigned int on)
 {
-	unsigned int bit = irq - AU1000_INTC1_INT_BASE;
+	int bit = irq - AU1000_INTC1_INT_BASE;
 	unsigned long wakemsk, flags;
 
-	/* only GPIO 0-7 can act as wakeup source: */
-	if ((irq < AU1000_GPIO_0) || (irq > AU1000_GPIO_7))
+	/* only GPIO 0-7 can act as wakeup source.  Fortunately these
+	 * are wired up identically on all supported variants.
+	 */
+	if ((bit < 0) || (bit > 7))
 		return -EINVAL;
 
 	local_irq_save(flags);
@@ -504,11 +518,11 @@ static int au1x_ic_settype(unsigned int irq, unsigned int flow_type)
 asmlinkage void plat_irq_dispatch(void)
 {
 	unsigned int pending = read_c0_status() & read_c0_cause();
-	unsigned long s, off, bit;
+	unsigned long s, off;
 
 	if (pending & CAUSEF_IP7) {
-		do_IRQ(MIPS_CPU_IRQ_BASE + 7);
-		return;
+		off = MIPS_CPU_IRQ_BASE + 7;
+		goto handle;
 	} else if (pending & CAUSEF_IP2) {
 		s = IC0_REQ0INT;
 		off = AU1000_INTC0_INT_BASE;
@@ -524,58 +538,20 @@ asmlinkage void plat_irq_dispatch(void)
 	} else
 		goto spurious;
 
-	bit = 0;
 	s = au_readl(s);
 	if (unlikely(!s)) {
 spurious:
 		spurious_interrupt();
 		return;
 	}
-#ifdef AU1000_USB_DEV_REQ_INT
-	/*
-	 * Because of the tight timing of SETUP token to reply
-	 * transactions, the USB devices-side packet complete
-	 * interrupt needs the highest priority.
-	 */
-	bit = 1 << (AU1000_USB_DEV_REQ_INT - AU1000_INTC0_INT_BASE);
-	if ((pending & CAUSEF_IP2) && (s & bit)) {
-		do_IRQ(AU1000_USB_DEV_REQ_INT);
-		return;
-	}
-#endif
-	do_IRQ(__ffs(s) + off);
+	off += __ffs(s);
+handle:
+	do_IRQ(off);
 }
 
-/* setup edge/level and assign request 0/1 */
-void __init au1xxx_setup_irqmap(struct au1xxx_irqmap *map, int count)
+static void __init au1000_init_irq(struct au1xxx_irqmap *map)
 {
 	unsigned int bit, irq_nr;
-
-	while (count--) {
-		irq_nr = map[count].im_irq;
-
-		if (((irq_nr < AU1000_INTC0_INT_BASE) ||
-		     (irq_nr >= AU1000_INTC0_INT_BASE + 32)) &&
-		    ((irq_nr < AU1000_INTC1_INT_BASE) ||
-		     (irq_nr >= AU1000_INTC1_INT_BASE + 32)))
-			continue;
-
-		if (irq_nr >= AU1000_INTC1_INT_BASE) {
-			bit = irq_nr - AU1000_INTC1_INT_BASE;
-			if (map[count].im_request)
-				au_writel(1 << bit, IC1_ASSIGNCLR);
-		} else {
-			bit = irq_nr - AU1000_INTC0_INT_BASE;
-			if (map[count].im_request)
-				au_writel(1 << bit, IC0_ASSIGNCLR);
-		}
-
-		au1x_ic_settype(irq_nr, map[count].im_type);
-	}
-}
-
-void __init arch_init_irq(void)
-{
 	int i;
 
 	/*
@@ -585,7 +561,7 @@ void __init arch_init_irq(void)
 	au_writel(0xffffffff, IC0_CFG1CLR);
 	au_writel(0xffffffff, IC0_CFG2CLR);
 	au_writel(0xffffffff, IC0_MASKCLR);
-	au_writel(0xffffffff, IC0_ASSIGNSET);
+	au_writel(0xffffffff, IC0_ASSIGNCLR);
 	au_writel(0xffffffff, IC0_WAKECLR);
 	au_writel(0xffffffff, IC0_SRCSET);
 	au_writel(0xffffffff, IC0_FALLINGCLR);
@@ -596,7 +572,7 @@ void __init arch_init_irq(void)
 	au_writel(0xffffffff, IC1_CFG1CLR);
 	au_writel(0xffffffff, IC1_CFG2CLR);
 	au_writel(0xffffffff, IC1_MASKCLR);
-	au_writel(0xffffffff, IC1_ASSIGNSET);
+	au_writel(0xffffffff, IC1_ASSIGNCLR);
 	au_writel(0xffffffff, IC1_WAKECLR);
 	au_writel(0xffffffff, IC1_SRCSET);
 	au_writel(0xffffffff, IC1_FALLINGCLR);
@@ -619,11 +595,43 @@ void __init arch_init_irq(void)
 	/*
 	 * Initialize IC0, which is fixed per processor.
 	 */
-	au1xxx_setup_irqmap(au1xxx_ic0_map, ARRAY_SIZE(au1xxx_ic0_map));
+	while (map->im_irq != -1) {
+		irq_nr = map->im_irq;
 
-	/* Boards can register additional (GPIO-based) IRQs.
-	*/
-	board_init_irq();
+		if (irq_nr >= AU1000_INTC1_INT_BASE) {
+			bit = irq_nr - AU1000_INTC1_INT_BASE;
+			if (map->im_request)
+				au_writel(1 << bit, IC1_ASSIGNSET);
+		} else {
+			bit = irq_nr - AU1000_INTC0_INT_BASE;
+			if (map->im_request)
+				au_writel(1 << bit, IC0_ASSIGNSET);
+		}
+
+		au1x_ic_settype(irq_nr, map->im_type);
+		++map;
+	}
 
 	set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3);
 }
+
+void __init arch_init_irq(void)
+{
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+		au1000_init_irq(au1000_irqmap);
+		break;
+	case ALCHEMY_CPU_AU1500:
+		au1000_init_irq(au1500_irqmap);
+		break;
+	case ALCHEMY_CPU_AU1100:
+		au1000_init_irq(au1100_irqmap);
+		break;
+	case ALCHEMY_CPU_AU1550:
+		au1000_init_irq(au1550_irqmap);
+		break;
+	case ALCHEMY_CPU_AU1200:
+		au1000_init_irq(au1200_irqmap);
+		break;
+	}
+}

arch/mips/alchemy/common/platform.c

@@ -19,39 +19,40 @@
 #include <asm/mach-au1x00/au1xxx.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
 #include <asm/mach-au1x00/au1100_mmc.h>
-
-#define PORT(_base, _irq)				\
-	{						\
-		.iobase		= _base,		\
-		.membase	= (void __iomem *)_base,\
-		.mapbase	= CPHYSADDR(_base),	\
-		.irq		= _irq,			\
-		.regshift	= 2,			\
-		.iotype		= UPIO_AU,		\
-		.flags		= UPF_SKIP_TEST 	\
+#include <asm/mach-au1x00/au1xxx_eth.h>
+
+#define PORT(_base, _irq)					\
+	{							\
+		.mapbase	= _base,			\
+		.irq		= _irq,				\
+		.regshift	= 2,				\
+		.iotype		= UPIO_AU,			\
+		.flags		= UPF_SKIP_TEST | UPF_IOREMAP |	\
+				  UPF_FIXED_TYPE,		\
+		.type		= PORT_16550A,			\
 	}
 
 static struct plat_serial8250_port au1x00_uart_data[] = {
 #if defined(CONFIG_SERIAL_8250_AU1X00)
 #if defined(CONFIG_SOC_AU1000)
-	PORT(UART0_ADDR, AU1000_UART0_INT),
-	PORT(UART1_ADDR, AU1000_UART1_INT),
-	PORT(UART2_ADDR, AU1000_UART2_INT),
-	PORT(UART3_ADDR, AU1000_UART3_INT),
+	PORT(UART0_PHYS_ADDR, AU1000_UART0_INT),
+	PORT(UART1_PHYS_ADDR, AU1000_UART1_INT),
+	PORT(UART2_PHYS_ADDR, AU1000_UART2_INT),
+	PORT(UART3_PHYS_ADDR, AU1000_UART3_INT),
 #elif defined(CONFIG_SOC_AU1500)
-	PORT(UART0_ADDR, AU1500_UART0_INT),
-	PORT(UART3_ADDR, AU1500_UART3_INT),
+	PORT(UART0_PHYS_ADDR, AU1500_UART0_INT),
+	PORT(UART3_PHYS_ADDR, AU1500_UART3_INT),
 #elif defined(CONFIG_SOC_AU1100)
-	PORT(UART0_ADDR, AU1100_UART0_INT),
-	PORT(UART1_ADDR, AU1100_UART1_INT),
-	PORT(UART3_ADDR, AU1100_UART3_INT),
+	PORT(UART0_PHYS_ADDR, AU1100_UART0_INT),
+	PORT(UART1_PHYS_ADDR, AU1100_UART1_INT),
+	PORT(UART3_PHYS_ADDR, AU1100_UART3_INT),
 #elif defined(CONFIG_SOC_AU1550)
-	PORT(UART0_ADDR, AU1550_UART0_INT),
-	PORT(UART1_ADDR, AU1550_UART1_INT),
-	PORT(UART3_ADDR, AU1550_UART3_INT),
+	PORT(UART0_PHYS_ADDR, AU1550_UART0_INT),
+	PORT(UART1_PHYS_ADDR, AU1550_UART1_INT),
+	PORT(UART3_PHYS_ADDR, AU1550_UART3_INT),
 #elif defined(CONFIG_SOC_AU1200)
-	PORT(UART0_ADDR, AU1200_UART0_INT),
-	PORT(UART1_ADDR, AU1200_UART1_INT),
+	PORT(UART0_PHYS_ADDR, AU1200_UART0_INT),
+	PORT(UART1_PHYS_ADDR, AU1200_UART1_INT),
 #endif
 #endif	/* CONFIG_SERIAL_8250_AU1X00 */
 	{ },
@@ -73,8 +74,8 @@ static struct resource au1xxx_usb_ohci_resources[] = {
 		.flags		= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start		= AU1000_USB_HOST_INT,
-		.end		= AU1000_USB_HOST_INT,
+		.start		= FOR_PLATFORM_C_USB_HOST_INT,
+		.end		= FOR_PLATFORM_C_USB_HOST_INT,
 		.flags		= IORESOURCE_IRQ,
 	},
 };
@@ -132,8 +133,8 @@ static struct resource au1xxx_usb_ehci_resources[] = {
 		.flags		= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start		= AU1000_USB_HOST_INT,
-		.end		= AU1000_USB_HOST_INT,
+		.start		= AU1200_USB_INT,
+		.end		= AU1200_USB_INT,
 		.flags		= IORESOURCE_IRQ,
 	},
 };
@@ -308,11 +309,6 @@ static struct platform_device au1200_mmc1_device = {
 #endif /* #ifndef CONFIG_MIPS_DB1200 */
 #endif /* #ifdef CONFIG_SOC_AU1200 */
 
-static struct platform_device au1x00_pcmcia_device = {
-	.name 		= "au1x00-pcmcia",
-	.id 		= 0,
-};
-
 /* All Alchemy demoboards with I2C have this #define in their headers */
 #ifdef SMBUS_PSC_BASE
 static struct resource pbdb_smbus_resources[] = {
@@ -331,10 +327,92 @@ static struct platform_device pbdb_smbus_device = {
 };
 #endif
 
+/* Macro to help defining the Ethernet MAC resources */
+#define MAC_RES(_base, _enable, _irq)			\
+	{						\
+		.start	= CPHYSADDR(_base),		\
+		.end	= CPHYSADDR(_base + 0xffff),	\
+		.flags	= IORESOURCE_MEM,		\
+	},						\
+	{						\
+		.start	= CPHYSADDR(_enable),		\
+		.end	= CPHYSADDR(_enable + 0x3),	\
+		.flags	= IORESOURCE_MEM,		\
+	},						\
+	{						\
+		.start	= _irq,				\
+		.end	= _irq,				\
+		.flags	= IORESOURCE_IRQ		\
+	}
+
+static struct resource au1xxx_eth0_resources[] = {
+#if defined(CONFIG_SOC_AU1000)
+	MAC_RES(AU1000_ETH0_BASE, AU1000_MAC0_ENABLE, AU1000_MAC0_DMA_INT),
+#elif defined(CONFIG_SOC_AU1100)
+	MAC_RES(AU1100_ETH0_BASE, AU1100_MAC0_ENABLE, AU1100_MAC0_DMA_INT),
+#elif defined(CONFIG_SOC_AU1550)
+	MAC_RES(AU1550_ETH0_BASE, AU1550_MAC0_ENABLE, AU1550_MAC0_DMA_INT),
+#elif defined(CONFIG_SOC_AU1500)
+	MAC_RES(AU1500_ETH0_BASE, AU1500_MAC0_ENABLE, AU1500_MAC0_DMA_INT),
+#endif
+};
+
+
+static struct au1000_eth_platform_data au1xxx_eth0_platform_data = {
+	.phy1_search_mac0 = 1,
+};
+
+static struct platform_device au1xxx_eth0_device = {
+	.name		= "au1000-eth",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(au1xxx_eth0_resources),
+	.resource	= au1xxx_eth0_resources,
+	.dev.platform_data = &au1xxx_eth0_platform_data,
+};
+
+#ifndef CONFIG_SOC_AU1100
+static struct resource au1xxx_eth1_resources[] = {
+#if defined(CONFIG_SOC_AU1000)
+	MAC_RES(AU1000_ETH1_BASE, AU1000_MAC1_ENABLE, AU1000_MAC1_DMA_INT),
+#elif defined(CONFIG_SOC_AU1550)
+	MAC_RES(AU1550_ETH1_BASE, AU1550_MAC1_ENABLE, AU1550_MAC1_DMA_INT),
+#elif defined(CONFIG_SOC_AU1500)
+	MAC_RES(AU1500_ETH1_BASE, AU1500_MAC1_ENABLE, AU1500_MAC1_DMA_INT),
+#endif
+};
+
+static struct au1000_eth_platform_data au1xxx_eth1_platform_data = {
+	.phy1_search_mac0 = 1,
+};
+
+static struct platform_device au1xxx_eth1_device = {
+	.name		= "au1000-eth",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(au1xxx_eth1_resources),
+	.resource	= au1xxx_eth1_resources,
+	.dev.platform_data = &au1xxx_eth1_platform_data,
+};
+#endif
+
+void __init au1xxx_override_eth_cfg(unsigned int port,
+			struct au1000_eth_platform_data *eth_data)
+{
+	if (!eth_data || port > 1)
+		return;
+
+	if (port == 0)
+		memcpy(&au1xxx_eth0_platform_data, eth_data,
+			sizeof(struct au1000_eth_platform_data));
+#ifndef CONFIG_SOC_AU1100
+	else
+		memcpy(&au1xxx_eth1_platform_data, eth_data,
+			sizeof(struct au1000_eth_platform_data));
+#endif
+}
+
 static struct platform_device *au1xxx_platform_devices[] __initdata = {
 	&au1xx0_uart_device,
 	&au1xxx_usb_ohci_device,
-	&au1x00_pcmcia_device,
 #ifdef CONFIG_FB_AU1100
 	&au1100_lcd_device,
 #endif
@@ -351,6 +429,7 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
 #ifdef SMBUS_PSC_BASE
 	&pbdb_smbus_device,
 #endif
+	&au1xxx_eth0_device,
 };
 
 static int __init au1xxx_platform_init(void)
@@ -362,6 +441,12 @@ static int __init au1xxx_platform_init(void)
 	for (i = 0; au1x00_uart_data[i].flags; i++)
 		au1x00_uart_data[i].uartclk = uartclk;
 
+#ifndef CONFIG_SOC_AU1100
+	/* Register second MAC if enabled in pinfunc */
+	if (!(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2))
+		platform_device_register(&au1xxx_eth1_device);
+#endif
+
 	return platform_add_devices(au1xxx_platform_devices,
 				    ARRAY_SIZE(au1xxx_platform_devices));
 }

arch/mips/alchemy/common/prom.c

@@ -43,29 +43,15 @@ int prom_argc;
 char **prom_argv;
 char **prom_envp;
 
-char * __init_or_module prom_getcmdline(void)
-{
-	return &(arcs_cmdline[0]);
-}
-
 void prom_init_cmdline(void)
 {
-	char *cp;
-	int actr;
-
-	actr = 1; /* Always ignore argv[0] */
+	int i;
 
-	cp = &(arcs_cmdline[0]);
-	while (actr < prom_argc) {
-		strcpy(cp, prom_argv[actr]);
-		cp += strlen(prom_argv[actr]);
-		*cp++ = ' ';
-		actr++;
+	for (i = 1; i < prom_argc; i++) {
+		strlcat(arcs_cmdline, prom_argv[i], COMMAND_LINE_SIZE);
+		if (i < (prom_argc - 1))
+			strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
 	}
-	if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
-		--cp;
-	if (prom_argc > 1)
-		*cp = '\0';
 }
 
 char *prom_getenv(char *envname)
@@ -121,14 +107,12 @@ static inline void str2eaddr(unsigned char *ea, unsigned char *str)
 int prom_get_ethernet_addr(char *ethernet_addr)
 {
 	char *ethaddr_str;
-	char *argptr;
 
 	/* Check the environment variables first */
 	ethaddr_str = prom_getenv("ethaddr");
 	if (!ethaddr_str) {
 		/* Check command line */
-		argptr = prom_getcmdline();
-		ethaddr_str = strstr(argptr, "ethaddr=");
+		ethaddr_str = strstr(arcs_cmdline, "ethaddr=");
 		if (!ethaddr_str)
 			return -1;
 

arch/mips/alchemy/common/puts.c

@@ -1,68 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	Low level UART routines to directly access Alchemy UART.
- *
- * Copyright 2001, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <asm/mach-au1x00/au1000.h>
-
-#define SERIAL_BASE   UART_BASE
-#define SER_CMD       0x7
-#define SER_DATA      0x1
-#define TX_BUSY       0x20
-
-#define TIMEOUT       0xffffff
-#define SLOW_DOWN
-
-static volatile unsigned long * const com1 = (unsigned long *)SERIAL_BASE;
-
-#ifdef SLOW_DOWN
-static inline void slow_down(void)
-{
-	int k;
-
-	for (k = 0; k < 10000; k++);
-}
-#else
-#define slow_down()
-#endif
-
-void
-prom_putchar(const unsigned char c)
-{
-	unsigned char ch;
-	int i = 0;
-
-	do {
-		ch = com1[SER_CMD];
-		slow_down();
-		i++;
-		if (i > TIMEOUT)
-			break;
-	} while (0 == (ch & TX_BUSY));
-
-	com1[SER_DATA] = c;
-}

arch/mips/alchemy/common/reset.c

@@ -1,188 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	Au1xx0 reset routines.
- *
- * Copyright 2001, 2006, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/cacheflush.h>
-#include <asm/mach-au1x00/au1000.h>
-
-void au1000_restart(char *command)
-{
-	/* Set all integrated peripherals to disabled states */
-	extern void board_reset(void);
-	u32 prid = read_c0_prid();
-
-	printk(KERN_NOTICE "\n** Resetting Integrated Peripherals\n");
-
-	switch (prid & 0xFF000000) {
-	case 0x00000000: /* Au1000 */
-		au_writel(0x02, 0xb0000010); /* ac97_enable */
-		au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
-		asm("sync");
-		au_writel(0x00, 0xb017fffc); /* usbh_enable */
-		au_writel(0x00, 0xb0200058); /* usbd_enable */
-		au_writel(0x00, 0xb0300040); /* ir_enable */
-		au_writel(0x00, 0xb4004104); /* mac dma */
-		au_writel(0x00, 0xb4004114); /* mac dma */
-		au_writel(0x00, 0xb4004124); /* mac dma */
-		au_writel(0x00, 0xb4004134); /* mac dma */
-		au_writel(0x00, 0xb0520000); /* macen0 */
-		au_writel(0x00, 0xb0520004); /* macen1 */
-		au_writel(0x00, 0xb1000008); /* i2s_enable  */
-		au_writel(0x00, 0xb1100100); /* uart0_enable */
-		au_writel(0x00, 0xb1200100); /* uart1_enable */
-		au_writel(0x00, 0xb1300100); /* uart2_enable */
-		au_writel(0x00, 0xb1400100); /* uart3_enable */
-		au_writel(0x02, 0xb1600100); /* ssi0_enable */
-		au_writel(0x02, 0xb1680100); /* ssi1_enable */
-		au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
-		au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
-		au_writel(0x00, 0xb1900028); /* sys_clksrc */
-		au_writel(0x10, 0xb1900060); /* sys_cpupll */
-		au_writel(0x00, 0xb1900064); /* sys_auxpll */
-		au_writel(0x00, 0xb1900100); /* sys_pininputen */
-		break;
-	case 0x01000000: /* Au1500 */
-		au_writel(0x02, 0xb0000010); /* ac97_enable */
-		au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
-		asm("sync");
-		au_writel(0x00, 0xb017fffc); /* usbh_enable */
-		au_writel(0x00, 0xb0200058); /* usbd_enable */
-		au_writel(0x00, 0xb4004104); /* mac dma */
-		au_writel(0x00, 0xb4004114); /* mac dma */
-		au_writel(0x00, 0xb4004124); /* mac dma */
-		au_writel(0x00, 0xb4004134); /* mac dma */
-		au_writel(0x00, 0xb1520000); /* macen0 */
-		au_writel(0x00, 0xb1520004); /* macen1 */
-		au_writel(0x00, 0xb1100100); /* uart0_enable */
-		au_writel(0x00, 0xb1400100); /* uart3_enable */
-		au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
-		au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
-		au_writel(0x00, 0xb1900028); /* sys_clksrc */
-		au_writel(0x10, 0xb1900060); /* sys_cpupll */
-		au_writel(0x00, 0xb1900064); /* sys_auxpll */
-		au_writel(0x00, 0xb1900100); /* sys_pininputen */
-		break;
-	case 0x02000000: /* Au1100 */
-		au_writel(0x02, 0xb0000010); /* ac97_enable */
-		au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
-		asm("sync");
-		au_writel(0x00, 0xb017fffc); /* usbh_enable */
-		au_writel(0x00, 0xb0200058); /* usbd_enable */
-		au_writel(0x00, 0xb0300040); /* ir_enable */
-		au_writel(0x00, 0xb4004104); /* mac dma */
-		au_writel(0x00, 0xb4004114); /* mac dma */
-		au_writel(0x00, 0xb4004124); /* mac dma */
-		au_writel(0x00, 0xb4004134); /* mac dma */
-		au_writel(0x00, 0xb0520000); /* macen0 */
-		au_writel(0x00, 0xb1000008); /* i2s_enable  */
-		au_writel(0x00, 0xb1100100); /* uart0_enable */
-		au_writel(0x00, 0xb1200100); /* uart1_enable */
-		au_writel(0x00, 0xb1400100); /* uart3_enable */
-		au_writel(0x02, 0xb1600100); /* ssi0_enable */
-		au_writel(0x02, 0xb1680100); /* ssi1_enable */
-		au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
-		au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
-		au_writel(0x00, 0xb1900028); /* sys_clksrc */
-		au_writel(0x10, 0xb1900060); /* sys_cpupll */
-		au_writel(0x00, 0xb1900064); /* sys_auxpll */
-		au_writel(0x00, 0xb1900100); /* sys_pininputen */
-		break;
-	case 0x03000000: /* Au1550 */
-		au_writel(0x00, 0xb1a00004); /* psc 0 */
-		au_writel(0x00, 0xb1b00004); /* psc 1 */
-		au_writel(0x00, 0xb0a00004); /* psc 2 */
-		au_writel(0x00, 0xb0b00004); /* psc 3 */
-		au_writel(0x00, 0xb017fffc); /* usbh_enable */
-		au_writel(0x00, 0xb0200058); /* usbd_enable */
-		au_writel(0x00, 0xb4004104); /* mac dma */
-		au_writel(0x00, 0xb4004114); /* mac dma */
-		au_writel(0x00, 0xb4004124); /* mac dma */
-		au_writel(0x00, 0xb4004134); /* mac dma */
-		au_writel(0x00, 0xb1520000); /* macen0 */
-		au_writel(0x00, 0xb1520004); /* macen1 */
-		au_writel(0x00, 0xb1100100); /* uart0_enable */
-		au_writel(0x00, 0xb1200100); /* uart1_enable */
-		au_writel(0x00, 0xb1400100); /* uart3_enable */
-		au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
-		au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
-		au_writel(0x00, 0xb1900028); /* sys_clksrc */
-		au_writel(0x10, 0xb1900060); /* sys_cpupll */
-		au_writel(0x00, 0xb1900064); /* sys_auxpll */
-		au_writel(0x00, 0xb1900100); /* sys_pininputen */
-		break;
-	}
-
-	set_c0_status(ST0_BEV | ST0_ERL);
-	change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
-	flush_cache_all();
-	write_c0_wired(0);
-
-	/* Give board a chance to do a hardware reset */
-	board_reset();
-
-	/* Jump to the beggining in case board_reset() is empty */
-	__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
-}
-
-void au1000_halt(void)
-{
-#if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550)
-	/* Power off system */
-	printk(KERN_NOTICE "\n** Powering off...\n");
-	au_writew(au_readw(0xAF00001C) | (3 << 14), 0xAF00001C);
-	au_sync();
-	while (1); /* should not get here */
-#else
-	printk(KERN_NOTICE "\n** You can safely turn off the power\n");
-#ifdef CONFIG_MIPS_MIRAGE
-	gpio_direction_output(210, 1);
-#endif
-#ifdef CONFIG_MIPS_DB1200
-	au_writew(au_readw(0xB980001C) | (1 << 14), 0xB980001C);
-#endif
-#ifdef CONFIG_PM
-	au_sleep();
-
-	/* Should not get here */
-	printk(KERN_ERR "Unable to put CPU in sleep mode\n");
-	while (1);
-#else
-	while (1)
-		__asm__(".set\tmips3\n\t"
-	                "wait\n\t"
-			".set\tmips0");
-#endif
-#endif /* defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) */
-}
-
-void au1000_power_off(void)
-{
-	au1000_halt();
-}

arch/mips/alchemy/common/setup.c

@@ -29,18 +29,13 @@
 #include <linux/ioport.h>
 #include <linux/jiffies.h>
 #include <linux/module.h>
-#include <linux/pm.h>
 
 #include <asm/mipsregs.h>
-#include <asm/reboot.h>
 #include <asm/time.h>
 
 #include <au1000.h>
 
 extern void __init board_setup(void);
-extern void au1000_restart(char *);
-extern void au1000_halt(void);
-extern void au1000_power_off(void);
 extern void set_cpuspec(void);
 
 void __init plat_mem_setup(void)
@@ -57,10 +52,6 @@ void __init plat_mem_setup(void)
 	/* this is faster than wasting cycles trying to approximate it */
 	preset_lpj = (est_freq >> 1) / HZ;
 
-	_machine_restart = au1000_restart;
-	_machine_halt = au1000_halt;
-	pm_power_off = au1000_power_off;
-
 	board_setup();  /* board specific setup */
 
 	if (au1xxx_cpu_needs_config_od())
@@ -78,37 +69,20 @@ void __init plat_mem_setup(void)
 	iomem_resource.end = IOMEM_RESOURCE_END;
 }
 
-#if defined(CONFIG_64BIT_PHYS_ADDR)
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_PCI)
 /* This routine should be valid for all Au1x based boards */
 phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
 {
+	u32 start = (u32)Au1500_PCI_MEM_START;
+	u32 end   = (u32)Au1500_PCI_MEM_END;
+
 	/* Don't fixup 36-bit addresses */
 	if ((phys_addr >> 32) != 0)
 		return phys_addr;
 
-#ifdef CONFIG_PCI
-	{
-		u32 start = (u32)Au1500_PCI_MEM_START;
-		u32 end   = (u32)Au1500_PCI_MEM_END;
-
-		/* Check for PCI memory window */
-		if (phys_addr >= start && (phys_addr + size - 1) <= end)
-			return (phys_t)
-			       ((phys_addr - start) + Au1500_PCI_MEM_START);
-	}
-#endif
-
-	/*
-	 * All Au1xx0 SOCs have a PCMCIA controller.
-	 * We setup our 32-bit pseudo addresses to be equal to the
-	 * 36-bit addr >> 4, to make it easier to check the address
-	 * and fix it.
-	 * The PCMCIA socket 0 physical attribute address is 0xF 4000 0000.
-	 * The pseudo address we use is 0xF400 0000. Any address over
-	 * 0xF400 0000 is a PCMCIA pseudo address.
-	 */
-	if ((phys_addr >= 0xF4000000) && (phys_addr < 0xFFFFFFFF))
-		return (phys_t)(phys_addr << 4);
+	/* Check for PCI memory window */
+	if (phys_addr >= start && (phys_addr + size - 1) <= end)
+		return (phys_t)((phys_addr - start) + Au1500_PCI_MEM_START);
 
 	/* default nop */
 	return phys_addr;

arch/mips/alchemy/common/time.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2008 Manuel Lauss <mano@roarinelk.homelinux.net>
+ * Copyright (C) 2008-2009 Manuel Lauss <manuel.lauss@gmail.com>
  *
  * Previous incarnations were:
  * Copyright (C) 2001, 2006, 2008 MontaVista Software, <source@mvista.com>
@@ -85,7 +85,6 @@ static struct clock_event_device au1x_rtcmatch2_clockdev = {
 	.name		= "rtcmatch2",
 	.features	= CLOCK_EVT_FEAT_ONESHOT,
 	.rating		= 100,
-	.irq		= AU1000_RTC_MATCH2_INT,
 	.set_next_event	= au1x_rtcmatch2_set_next_event,
 	.set_mode	= au1x_rtcmatch2_set_mode,
 	.cpumask	= cpu_all_mask,
@@ -98,11 +97,13 @@ static struct irqaction au1x_rtcmatch2_irqaction = {
 	.dev_id		= &au1x_rtcmatch2_clockdev,
 };
 
-void __init plat_time_init(void)
+static int __init alchemy_time_init(unsigned int m2int)
 {
 	struct clock_event_device *cd = &au1x_rtcmatch2_clockdev;
 	unsigned long t;
 
+	au1x_rtcmatch2_clockdev.irq = m2int;
+
 	/* Check if firmware (YAMON, ...) has enabled 32kHz and clock
 	 * has been detected.  If so install the rtcmatch2 clocksource,
 	 * otherwise don't bother.  Note that both bits being set is by
@@ -148,13 +149,18 @@ void __init plat_time_init(void)
 	cd->max_delta_ns = clockevent_delta2ns(0xffffffff, cd);
 	cd->min_delta_ns = clockevent_delta2ns(8, cd);	/* ~0.25ms */
 	clockevents_register_device(cd);
-	setup_irq(AU1000_RTC_MATCH2_INT, &au1x_rtcmatch2_irqaction);
+	setup_irq(m2int, &au1x_rtcmatch2_irqaction);
 
 	printk(KERN_INFO "Alchemy clocksource installed\n");
 
-	return;
+	return 0;
 
 cntr_err:
+	return -1;
+}
+
+static void __init alchemy_setup_c0timer(void)
+{
 	/*
 	 * MIPS kernel assigns 'au1k_wait' to 'cpu_wait' before this
 	 * function is called.  Because the Alchemy counters are unusable
@@ -166,3 +172,22 @@ cntr_err:
 	r4k_clockevent_init();
 	init_r4k_clocksource();
 }
+
+static int alchemy_m2inttab[] __initdata = {
+	AU1000_RTC_MATCH2_INT,
+	AU1500_RTC_MATCH2_INT,
+	AU1100_RTC_MATCH2_INT,
+	AU1550_RTC_MATCH2_INT,
+	AU1200_RTC_MATCH2_INT,
+};
+
+void __init plat_time_init(void)
+{
+	int t;
+
+	t = alchemy_get_cputype();
+	if (t == ALCHEMY_CPU_UNKNOWN)
+		alchemy_setup_c0timer();
+	else if (alchemy_time_init(alchemy_m2inttab[t]))
+		alchemy_setup_c0timer();
+}

arch/mips/alchemy/devboards/Makefile

@@ -2,7 +2,7 @@
 # Alchemy Develboards
 #
 
-obj-y += prom.o
+obj-y += prom.o bcsr.o platform.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_MIPS_PB1000)	+= pb1000/
 obj-$(CONFIG_MIPS_PB1100)	+= pb1100/
@@ -11,8 +11,10 @@ obj-$(CONFIG_MIPS_PB1500)	+= pb1500/
 obj-$(CONFIG_MIPS_PB1550)	+= pb1550/
 obj-$(CONFIG_MIPS_DB1000)	+= db1x00/
 obj-$(CONFIG_MIPS_DB1100)	+= db1x00/
-obj-$(CONFIG_MIPS_DB1200)	+= pb1200/
+obj-$(CONFIG_MIPS_DB1200)	+= db1200/
 obj-$(CONFIG_MIPS_DB1500)	+= db1x00/
 obj-$(CONFIG_MIPS_DB1550)	+= db1x00/
 obj-$(CONFIG_MIPS_BOSPORUS)	+= db1x00/
 obj-$(CONFIG_MIPS_MIRAGE)	+= db1x00/
+
+EXTRA_CFLAGS += -Werror

arch/mips/alchemy/devboards/bcsr.c

@@ -0,0 +1,148 @@
+/*
+ * bcsr.h -- Db1xxx/Pb1xxx Devboard CPLD registers ("BCSR") abstraction.
+ *
+ * All Alchemy development boards (except, of course, the weird PB1000)
+ * have a few registers in a CPLD with standardised layout; they mostly
+ * only differ in base address.
+ * All registers are 16bits wide with 32bit spacing.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <asm/addrspace.h>
+#include <asm/io.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+static struct bcsr_reg {
+	void __iomem *raddr;
+	spinlock_t lock;
+} bcsr_regs[BCSR_CNT];
+
+static void __iomem *bcsr_virt;	/* KSEG1 addr of BCSR base */
+static int bcsr_csc_base;	/* linux-irq of first cascaded irq */
+
+void __init bcsr_init(unsigned long bcsr1_phys, unsigned long bcsr2_phys)
+{
+	int i;
+
+	bcsr1_phys = KSEG1ADDR(CPHYSADDR(bcsr1_phys));
+	bcsr2_phys = KSEG1ADDR(CPHYSADDR(bcsr2_phys));
+
+	bcsr_virt = (void __iomem *)bcsr1_phys;
+
+	for (i = 0; i < BCSR_CNT; i++) {
+		if (i >= BCSR_HEXLEDS)
+			bcsr_regs[i].raddr = (void __iomem *)bcsr2_phys +
+					(0x04 * (i - BCSR_HEXLEDS));
+		else
+			bcsr_regs[i].raddr = (void __iomem *)bcsr1_phys +
+					(0x04 * i);
+
+		spin_lock_init(&bcsr_regs[i].lock);
+	}
+}
+
+unsigned short bcsr_read(enum bcsr_id reg)
+{
+	unsigned short r;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bcsr_regs[reg].lock, flags);
+	r = __raw_readw(bcsr_regs[reg].raddr);
+	spin_unlock_irqrestore(&bcsr_regs[reg].lock, flags);
+	return r;
+}
+EXPORT_SYMBOL_GPL(bcsr_read);
+
+void bcsr_write(enum bcsr_id reg, unsigned short val)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&bcsr_regs[reg].lock, flags);
+	__raw_writew(val, bcsr_regs[reg].raddr);
+	wmb();
+	spin_unlock_irqrestore(&bcsr_regs[reg].lock, flags);
+}
+EXPORT_SYMBOL_GPL(bcsr_write);
+
+void bcsr_mod(enum bcsr_id reg, unsigned short clr, unsigned short set)
+{
+	unsigned short r;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bcsr_regs[reg].lock, flags);
+	r = __raw_readw(bcsr_regs[reg].raddr);
+	r &= ~clr;
+	r |= set;
+	__raw_writew(r, bcsr_regs[reg].raddr);
+	wmb();
+	spin_unlock_irqrestore(&bcsr_regs[reg].lock, flags);
+}
+EXPORT_SYMBOL_GPL(bcsr_mod);
+
+/*
+ * DB1200/PB1200 CPLD IRQ muxer
+ */
+static void bcsr_csc_handler(unsigned int irq, struct irq_desc *d)
+{
+	unsigned short bisr = __raw_readw(bcsr_virt + BCSR_REG_INTSTAT);
+
+	for ( ; bisr; bisr &= bisr - 1)
+		generic_handle_irq(bcsr_csc_base + __ffs(bisr));
+}
+
+/* NOTE: both the enable and mask bits must be cleared, otherwise the
+ * CPLD generates tons of spurious interrupts (at least on my DB1200).
+ *	-- mlau
+ */
+static void bcsr_irq_mask(unsigned int irq_nr)
+{
+	unsigned short v = 1 << (irq_nr - bcsr_csc_base);
+	__raw_writew(v, bcsr_virt + BCSR_REG_INTCLR);
+	__raw_writew(v, bcsr_virt + BCSR_REG_MASKCLR);
+	wmb();
+}
+
+static void bcsr_irq_maskack(unsigned int irq_nr)
+{
+	unsigned short v = 1 << (irq_nr - bcsr_csc_base);
+	__raw_writew(v, bcsr_virt + BCSR_REG_INTCLR);
+	__raw_writew(v, bcsr_virt + BCSR_REG_MASKCLR);
+	__raw_writew(v, bcsr_virt + BCSR_REG_INTSTAT);	/* ack */
+	wmb();
+}
+
+static void bcsr_irq_unmask(unsigned int irq_nr)
+{
+	unsigned short v = 1 << (irq_nr - bcsr_csc_base);
+	__raw_writew(v, bcsr_virt + BCSR_REG_INTSET);
+	__raw_writew(v, bcsr_virt + BCSR_REG_MASKSET);
+	wmb();
+}
+
+static struct irq_chip bcsr_irq_type = {
+	.name		= "CPLD",
+	.mask		= bcsr_irq_mask,
+	.mask_ack	= bcsr_irq_maskack,
+	.unmask		= bcsr_irq_unmask,
+};
+
+void __init bcsr_init_irq(int csc_start, int csc_end, int hook_irq)
+{
+	unsigned int irq;
+
+	/* mask & disable & ack all */
+	__raw_writew(0xffff, bcsr_virt + BCSR_REG_INTCLR);
+	__raw_writew(0xffff, bcsr_virt + BCSR_REG_MASKCLR);
+	__raw_writew(0xffff, bcsr_virt + BCSR_REG_INTSTAT);
+	wmb();
+
+	bcsr_csc_base = csc_start;
+
+	for (irq = csc_start; irq <= csc_end; irq++)
+		set_irq_chip_and_handler_name(irq, &bcsr_irq_type,
+			handle_level_irq, "level");
+
+	set_irq_chained_handler(hook_irq, bcsr_csc_handler);
+}

arch/mips/alchemy/devboards/db1200/Makefile

@@ -0,0 +1 @@
+obj-y += setup.o platform.o

arch/mips/alchemy/devboards/db1200/platform.c

@@ -0,0 +1,561 @@
+/*
+ * DBAu1200 board platform device registration
+ *
+ * Copyright (C) 2008-2009 Manuel Lauss
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/mmc/host.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-au1x00/au1100_mmc.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
+#include <asm/mach-au1x00/au1550_spi.h>
+#include <asm/mach-db1x00/bcsr.h>
+#include <asm/mach-db1x00/db1200.h>
+
+#include "../platform.h"
+
+static struct mtd_partition db1200_spiflash_parts[] = {
+	{
+		.name	= "DB1200 SPI flash",
+		.offset	= 0,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct flash_platform_data db1200_spiflash_data = {
+	.name		= "s25fl001",
+	.parts		= db1200_spiflash_parts,
+	.nr_parts	= ARRAY_SIZE(db1200_spiflash_parts),
+	.type		= "m25p10",
+};
+
+static struct spi_board_info db1200_spi_devs[] __initdata = {
+	{
+		/* TI TMP121AIDBVR temp sensor */
+		.modalias	= "tmp121",
+		.max_speed_hz	= 2000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.mode		= 0,
+	},
+	{
+		/* Spansion S25FL001D0FMA SPI flash */
+		.modalias	= "m25p80",
+		.max_speed_hz	= 50000000,
+		.bus_num	= 0,
+		.chip_select	= 1,
+		.mode		= 0,
+		.platform_data	= &db1200_spiflash_data,
+	},
+};
+
+static struct i2c_board_info db1200_i2c_devs[] __initdata = {
+	{
+		/* AT24C04-10 I2C eeprom */
+		I2C_BOARD_INFO("24c04", 0x52),
+	},
+	{
+		/* Philips NE1619 temp/voltage sensor (adm1025 drv) */
+		I2C_BOARD_INFO("ne1619", 0x2d),
+	},
+	{
+		/* I2S audio codec WM8731 */
+		I2C_BOARD_INFO("wm8731", 0x1b),
+	},
+};
+
+/**********************************************************************/
+
+static void au1200_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+				 unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+	unsigned long ioaddr = (unsigned long)this->IO_ADDR_W;
+
+	ioaddr &= 0xffffff00;
+
+	if (ctrl & NAND_CLE) {
+		ioaddr += MEM_STNAND_CMD;
+	} else if (ctrl & NAND_ALE) {
+		ioaddr += MEM_STNAND_ADDR;
+	} else {
+		/* assume we want to r/w real data  by default */
+		ioaddr += MEM_STNAND_DATA;
+	}
+	this->IO_ADDR_R = this->IO_ADDR_W = (void __iomem *)ioaddr;
+	if (cmd != NAND_CMD_NONE) {
+		__raw_writeb(cmd, this->IO_ADDR_W);
+		wmb();
+	}
+}
+
+static int au1200_nand_device_ready(struct mtd_info *mtd)
+{
+	return __raw_readl((void __iomem *)MEM_STSTAT) & 1;
+}
+
+static const char *db1200_part_probes[] = { "cmdlinepart", NULL };
+
+static struct mtd_partition db1200_nand_parts[] = {
+	{
+		.name	= "NAND FS 0",
+		.offset	= 0,
+		.size	= 8 * 1024 * 1024,
+	},
+	{
+		.name	= "NAND FS 1",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL
+	},
+};
+
+struct platform_nand_data db1200_nand_platdata = {
+	.chip = {
+		.nr_chips	= 1,
+		.chip_offset	= 0,
+		.nr_partitions	= ARRAY_SIZE(db1200_nand_parts),
+		.partitions	= db1200_nand_parts,
+		.chip_delay	= 20,
+		.part_probe_types = db1200_part_probes,
+	},
+	.ctrl = {
+		.dev_ready	= au1200_nand_device_ready,
+		.cmd_ctrl	= au1200_nand_cmd_ctrl,
+	},
+};
+
+static struct resource db1200_nand_res[] = {
+	[0] = {
+		.start	= DB1200_NAND_PHYS_ADDR,
+		.end	= DB1200_NAND_PHYS_ADDR + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device db1200_nand_dev = {
+	.name		= "gen_nand",
+	.num_resources	= ARRAY_SIZE(db1200_nand_res),
+	.resource	= db1200_nand_res,
+	.id		= -1,
+	.dev		= {
+		.platform_data = &db1200_nand_platdata,
+	}
+};
+
+/**********************************************************************/
+
+static struct smc91x_platdata db1200_eth_data = {
+	.flags	= SMC91X_NOWAIT | SMC91X_USE_16BIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
+
+static struct resource db1200_eth_res[] = {
+	[0] = {
+		.start	= DB1200_ETH_PHYS_ADDR,
+		.end	= DB1200_ETH_PHYS_ADDR + 0xf,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DB1200_ETH_INT,
+		.end	= DB1200_ETH_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device db1200_eth_dev = {
+	.dev	= {
+		.platform_data	= &db1200_eth_data,
+	},
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(db1200_eth_res),
+	.resource	= db1200_eth_res,
+};
+
+/**********************************************************************/
+
+static struct resource db1200_ide_res[] = {
+	[0] = {
+		.start	= DB1200_IDE_PHYS_ADDR,
+		.end 	= DB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DB1200_IDE_INT,
+		.end	= DB1200_IDE_INT,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static u64 ide_dmamask = DMA_32BIT_MASK;
+
+static struct platform_device db1200_ide_dev = {
+	.name		= "au1200-ide",
+	.id		= 0,
+	.dev = {
+		.dma_mask 		= &ide_dmamask,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
+	},
+	.num_resources	= ARRAY_SIZE(db1200_ide_res),
+	.resource	= db1200_ide_res,
+};
+
+/**********************************************************************/
+
+static struct platform_device db1200_rtc_dev = {
+	.name	= "rtc-au1xxx",
+	.id	= -1,
+};
+
+/**********************************************************************/
+
+/* SD carddetects:  they're supposed to be edge-triggered, but ack
+ * doesn't seem to work (CPLD Rev 2).  Instead, the screaming one
+ * is disabled and its counterpart enabled.  The 500ms timeout is
+ * because the carddetect isn't debounced in hardware.
+ */
+static irqreturn_t db1200_mmc_cd(int irq, void *ptr)
+{
+	void(*mmc_cd)(struct mmc_host *, unsigned long);
+
+	if (irq == DB1200_SD0_INSERT_INT) {
+		disable_irq_nosync(DB1200_SD0_INSERT_INT);
+		enable_irq(DB1200_SD0_EJECT_INT);
+	} else {
+		disable_irq_nosync(DB1200_SD0_EJECT_INT);
+		enable_irq(DB1200_SD0_INSERT_INT);
+	}
+
+	/* link against CONFIG_MMC=m */
+	mmc_cd = symbol_get(mmc_detect_change);
+	if (mmc_cd) {
+		mmc_cd(ptr, msecs_to_jiffies(500));
+		symbol_put(mmc_detect_change);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int db1200_mmc_cd_setup(void *mmc_host, int en)
+{
+	int ret;
+
+	if (en) {
+		ret = request_irq(DB1200_SD0_INSERT_INT, db1200_mmc_cd,
+				  IRQF_DISABLED, "sd_insert", mmc_host);
+		if (ret)
+			goto out;
+
+		ret = request_irq(DB1200_SD0_EJECT_INT, db1200_mmc_cd,
+				  IRQF_DISABLED, "sd_eject", mmc_host);
+		if (ret) {
+			free_irq(DB1200_SD0_INSERT_INT, mmc_host);
+			goto out;
+		}
+
+		if (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT)
+			enable_irq(DB1200_SD0_EJECT_INT);
+		else
+			enable_irq(DB1200_SD0_INSERT_INT);
+
+	} else {
+		free_irq(DB1200_SD0_INSERT_INT, mmc_host);
+		free_irq(DB1200_SD0_EJECT_INT, mmc_host);
+	}
+	ret = 0;
+out:
+	return ret;
+}
+
+static void db1200_mmc_set_power(void *mmc_host, int state)
+{
+	if (state) {
+		bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR);
+		msleep(400);	/* stabilization time */
+	} else
+		bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0);
+}
+
+static int db1200_mmc_card_readonly(void *mmc_host)
+{
+	return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 1 : 0;
+}
+
+static int db1200_mmc_card_inserted(void *mmc_host)
+{
+	return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) ? 1 : 0;
+}
+
+static void db1200_mmcled_set(struct led_classdev *led,
+			      enum led_brightness brightness)
+{
+	if (brightness != LED_OFF)
+		bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0);
+	else
+		bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0);
+}
+
+static struct led_classdev db1200_mmc_led = {
+	.brightness_set	= db1200_mmcled_set,
+};
+
+/* needed by arch/mips/alchemy/common/platform.c */
+struct au1xmmc_platform_data au1xmmc_platdata[] = {
+	[0] = {
+		.cd_setup	= db1200_mmc_cd_setup,
+		.set_power	= db1200_mmc_set_power,
+		.card_inserted	= db1200_mmc_card_inserted,
+		.card_readonly	= db1200_mmc_card_readonly,
+		.led		= &db1200_mmc_led,
+	},
+};
+
+/**********************************************************************/
+
+static struct resource au1200_psc0_res[] = {
+	[0] = {
+		.start	= PSC0_PHYS_ADDR,
+		.end	= PSC0_PHYS_ADDR + 0x000fffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1200_PSC0_INT,
+		.end	= AU1200_PSC0_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= DSCR_CMD0_PSC0_TX,
+		.end	= DSCR_CMD0_PSC0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= DSCR_CMD0_PSC0_RX,
+		.end	= DSCR_CMD0_PSC0_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device db1200_i2c_dev = {
+	.name		= "au1xpsc_smbus",
+	.id		= 0,	/* bus number */
+	.num_resources	= ARRAY_SIZE(au1200_psc0_res),
+	.resource	= au1200_psc0_res,
+};
+
+static void db1200_spi_cs_en(struct au1550_spi_info *spi, int cs, int pol)
+{
+	if (cs)
+		bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_SPISEL);
+	else
+		bcsr_mod(BCSR_RESETS, BCSR_RESETS_SPISEL, 0);
+}
+
+static struct au1550_spi_info db1200_spi_platdata = {
+	.mainclk_hz	= 50000000,	/* PSC0 clock */
+	.num_chipselect = 2,
+	.activate_cs	= db1200_spi_cs_en,
+};
+
+static u64 spi_dmamask = DMA_32BIT_MASK;
+
+static struct platform_device db1200_spi_dev = {
+	.dev	= {
+		.dma_mask		= &spi_dmamask,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
+		.platform_data		= &db1200_spi_platdata,
+	},
+	.name		= "au1550-spi",
+	.id		= 0,	/* bus number */
+	.num_resources	= ARRAY_SIZE(au1200_psc0_res),
+	.resource	= au1200_psc0_res,
+};
+
+static struct resource au1200_psc1_res[] = {
+	[0] = {
+		.start	= PSC1_PHYS_ADDR,
+		.end	= PSC1_PHYS_ADDR + 0x000fffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1200_PSC1_INT,
+		.end	= AU1200_PSC1_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= DSCR_CMD0_PSC1_TX,
+		.end	= DSCR_CMD0_PSC1_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= DSCR_CMD0_PSC1_RX,
+		.end	= DSCR_CMD0_PSC1_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device db1200_audio_dev = {
+	/* name assigned later based on switch setting */
+	.id		= 1,	/* PSC ID */
+	.num_resources	= ARRAY_SIZE(au1200_psc1_res),
+	.resource	= au1200_psc1_res,
+};
+
+static struct platform_device *db1200_devs[] __initdata = {
+	NULL,		/* PSC0, selected by S6.8 */
+	&db1200_ide_dev,
+	&db1200_eth_dev,
+	&db1200_rtc_dev,
+	&db1200_nand_dev,
+	&db1200_audio_dev,
+};
+
+static int __init db1200_dev_init(void)
+{
+	unsigned long pfc;
+	unsigned short sw;
+	int swapped;
+
+	i2c_register_board_info(0, db1200_i2c_devs,
+				ARRAY_SIZE(db1200_i2c_devs));
+	spi_register_board_info(db1200_spi_devs,
+				ARRAY_SIZE(db1200_i2c_devs));
+
+	/* SWITCHES:	S6.8 I2C/SPI selector  (OFF=I2C  ON=SPI)
+	 *		S6.7 AC97/I2S selector (OFF=AC97 ON=I2S)
+	 */
+
+	/* NOTE: GPIO215 controls OTG VBUS supply.  In SPI mode however
+	 * this pin is claimed by PSC0 (unused though, but pinmux doesn't
+	 * allow to free it without crippling the SPI interface).
+	 * As a result, in SPI mode, OTG simply won't work (PSC0 uses
+	 * it as an input pin which is pulled high on the boards).
+	 */
+	pfc = __raw_readl((void __iomem *)SYS_PINFUNC) & ~SYS_PINFUNC_P0A;
+
+	/* switch off OTG VBUS supply */
+	gpio_request(215, "otg-vbus");
+	gpio_direction_output(215, 1);
+
+	printk(KERN_INFO "DB1200 device configuration:\n");
+
+	sw = bcsr_read(BCSR_SWITCHES);
+	if (sw & BCSR_SWITCHES_DIP_8) {
+		db1200_devs[0] = &db1200_i2c_dev;
+		bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0);
+
+		pfc |= (2 << 17);	/* GPIO2 block owns GPIO215 */
+
+		printk(KERN_INFO " S6.8 OFF: PSC0 mode I2C\n");
+		printk(KERN_INFO "   OTG port VBUS supply available!\n");
+	} else {
+		db1200_devs[0] = &db1200_spi_dev;
+		bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC0MUX);
+
+		pfc |= (1 << 17);	/* PSC0 owns GPIO215 */
+
+		printk(KERN_INFO " S6.8 ON : PSC0 mode SPI\n");
+		printk(KERN_INFO "   OTG port VBUS supply disabled\n");
+	}
+	__raw_writel(pfc, (void __iomem *)SYS_PINFUNC);
+	wmb();
+
+	/* Audio: DIP7 selects I2S(0)/AC97(1), but need I2C for I2S!
+	 * so: DIP7=1 || DIP8=0 => AC97, DIP7=0 && DIP8=1 => I2S
+	 */
+	sw &= BCSR_SWITCHES_DIP_8 | BCSR_SWITCHES_DIP_7;
+	if (sw == BCSR_SWITCHES_DIP_8) {
+		bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC1MUX);
+		db1200_audio_dev.name = "au1xpsc_i2s";
+		printk(KERN_INFO " S6.7 ON : PSC1 mode I2S\n");
+	} else {
+		bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC1MUX, 0);
+		db1200_audio_dev.name = "au1xpsc_ac97";
+		printk(KERN_INFO " S6.7 OFF: PSC1 mode AC97\n");
+	}
+
+	/* Audio PSC clock is supplied externally. (FIXME: platdata!!) */
+	__raw_writel(PSC_SEL_CLK_SERCLK,
+		(void __iomem *)KSEG1ADDR(PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
+	wmb();
+
+	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
+				    PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+				    PCMCIA_MEM_PHYS_ADDR,
+				    PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+				    PCMCIA_IO_PHYS_ADDR,
+				    PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+				    DB1200_PC0_INT,
+				    DB1200_PC0_INSERT_INT,
+				    /*DB1200_PC0_STSCHG_INT*/0,
+				    DB1200_PC0_EJECT_INT,
+				    0);
+
+	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
+				    PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
+				    PCMCIA_MEM_PHYS_ADDR  + 0x004000000,
+				    PCMCIA_MEM_PHYS_ADDR  + 0x004400000 - 1,
+				    PCMCIA_IO_PHYS_ADDR   + 0x004000000,
+				    PCMCIA_IO_PHYS_ADDR   + 0x004010000 - 1,
+				    DB1200_PC1_INT,
+				    DB1200_PC1_INSERT_INT,
+				    /*DB1200_PC1_STSCHG_INT*/0,
+				    DB1200_PC1_EJECT_INT,
+				    1);
+
+	swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT;
+	db1x_register_norflash(64 << 20, 2, swapped);
+
+	return platform_add_devices(db1200_devs, ARRAY_SIZE(db1200_devs));
+}
+device_initcall(db1200_dev_init);
+
+/* au1200fb calls these: STERBT EINEN TRAGISCHEN TOD!!! */
+int board_au1200fb_panel(void)
+{
+	return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f;
+}
+
+int board_au1200fb_panel_init(void)
+{
+	/* Apply power */
+	bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
+				BCSR_BOARD_LCDBL);
+	return 0;
+}
+
+int board_au1200fb_panel_shutdown(void)
+{
+	/* Remove power */
+	bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
+			     BCSR_BOARD_LCDBL, 0);
+	return 0;
+}

arch/mips/alchemy/devboards/db1200/setup.c

@@ -0,0 +1,118 @@
+/*
+ * Alchemy/AMD/RMI DB1200 board setup.
+ *
+ * Licensed under the terms outlined in the file COPYING in the root of
+ * this source archive.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-db1x00/bcsr.h>
+#include <asm/mach-db1x00/db1200.h>
+
+const char *get_system_type(void)
+{
+	return "Alchemy Db1200";
+}
+
+void __init board_setup(void)
+{
+	unsigned long freq0, clksrc, div, pfc;
+	unsigned short whoami;
+
+	bcsr_init(DB1200_BCSR_PHYS_ADDR,
+		  DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS);
+
+	whoami = bcsr_read(BCSR_WHOAMI);
+	printk(KERN_INFO "Alchemy/AMD/RMI DB1200 Board, CPLD Rev %d"
+		"  Board-ID %d  Daughtercard ID %d\n",
+		(whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf);
+
+	/* SMBus/SPI on PSC0, Audio on PSC1 */
+	pfc = __raw_readl((void __iomem *)SYS_PINFUNC);
+	pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
+	pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3);
+	pfc |= SYS_PINFUNC_P1C;	/* SPI is configured later */
+	__raw_writel(pfc, (void __iomem *)SYS_PINFUNC);
+	wmb();
+
+	/* Clock configurations: PSC0: ~50MHz via Clkgen0, derived from
+	 * CPU clock; all other clock generators off/unused.
+	 */
+	div = (get_au1x00_speed() + 25000000) / 50000000;
+	if (div & 1)
+		div++;
+	div = ((div >> 1) - 1) & 0xff;
+
+	freq0 = div << SYS_FC_FRDIV0_BIT;
+	__raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0);
+	wmb();
+	freq0 |= SYS_FC_FE0;	/* enable F0 */
+	__raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0);
+	wmb();
+
+	/* psc0_intclk comes 1:1 from F0 */
+	clksrc = SYS_CS_MUX_FQ0 << SYS_CS_ME0_BIT;
+	__raw_writel(clksrc, (void __iomem *)SYS_CLKSRC);
+	wmb();
+}
+
+/* use the hexleds to count the number of times the cpu has entered
+ * wait, the dots to indicate whether the CPU is currently idle or
+ * active (dots off = sleeping, dots on = working) for cases where
+ * the number doesn't change for a long(er) period of time.
+ */
+static void db1200_wait(void)
+{
+	__asm__("	.set	push			\n"
+		"	.set	mips3			\n"
+		"	.set	noreorder		\n"
+		"	cache	0x14, 0(%0)		\n"
+		"	cache	0x14, 32(%0)		\n"
+		"	cache	0x14, 64(%0)		\n"
+		/* dots off: we're about to call wait */
+		"	lui	$26, 0xb980		\n"
+		"	ori	$27, $0, 3		\n"
+		"	sb	$27, 0x18($26)		\n"
+		"	sync				\n"
+		"	nop				\n"
+		"	wait				\n"
+		"	nop				\n"
+		"	nop				\n"
+		"	nop				\n"
+		"	nop				\n"
+		"	nop				\n"
+		/* dots on: there's work to do, increment cntr */
+		"	lui	$26, 0xb980		\n"
+		"	sb	$0, 0x18($26)		\n"
+		"	lui	$26, 0xb9c0		\n"
+		"	lb	$27, 0($26)		\n"
+		"	addiu	$27, $27, 1		\n"
+		"	sb	$27, 0($26)		\n"
+		"	sync				\n"
+		"	.set	pop			\n"
+		: : "r" (db1200_wait));
+}
+
+static int __init db1200_arch_init(void)
+{
+	/* GPIO7 is low-level triggered CPLD cascade */
+	set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW);
+	bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT);
+
+	/* do not autoenable these: CPLD has broken edge int handling,
+	 * and the CD handler setup requires manual enabling to work
+	 * around that.
+	 */
+	irq_to_desc(DB1200_SD0_INSERT_INT)->status |= IRQ_NOAUTOEN;
+	irq_to_desc(DB1200_SD0_EJECT_INT)->status |= IRQ_NOAUTOEN;
+
+	if (cpu_wait)
+		cpu_wait = db1200_wait;
+
+	return 0;
+}
+arch_initcall(db1200_arch_init);

arch/mips/alchemy/devboards/db1x00/Makefile

@@ -5,4 +5,4 @@
 # Makefile for the Alchemy Semiconductor DBAu1xx0 boards.
 #
 
-obj-y := board_setup.o irqmap.o
+obj-y := board_setup.o platform.o

arch/mips/alchemy/devboards/db1x00/board_setup.c

@@ -29,59 +29,139 @@
 
 #include <linux/gpio.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
 
 #include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx_eth.h>
 #include <asm/mach-db1x00/db1x00.h>
+#include <asm/mach-db1x00/bcsr.h>
+#include <asm/reboot.h>
 
 #include <prom.h>
 
+#ifdef CONFIG_MIPS_DB1500
+char irq_tab_alchemy[][5] __initdata = {
+	[12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT371   */
+	[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */
+};
+
+#endif
 
-static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+#ifdef CONFIG_MIPS_DB1550
+char irq_tab_alchemy[][5] __initdata = {
+	[11] = { -1, AU1550_PCI_INTC, 0xff, 0xff, 0xff }, /* IDSEL 11 - on-board HPT371 */
+	[12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left) */
+	[13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */
+};
+#endif
+
+
+#ifdef CONFIG_MIPS_BOSPORUS
+char irq_tab_alchemy[][5] __initdata = {
+	[11] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 11 - miniPCI  */
+	[12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - SN1741   */
+	[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */
+};
+
+/*
+ * Micrel/Kendin 5 port switch attached to MAC0,
+ * MAC0 is associated with PHY address 5 (== WAN port)
+ * MAC1 is not associated with any PHY, since it's connected directly
+ * to the switch.
+ * no interrupts are used
+ */
+static struct au1000_eth_platform_data eth0_pdata = {
+	.phy_static_config	= 1,
+	.phy_addr		= 5,
+};
+
+static void bosporus_power_off(void)
+{
+	printk(KERN_INFO "It's now safe to turn off power\n");
+	while (1)
+		asm volatile (".set mips3 ; wait ; .set mips0");
+}
 
 const char *get_system_type(void)
 {
-#ifdef CONFIG_MIPS_BOSPORUS
 	return "Alchemy Bosporus Gateway Reference";
-#else
-	return "Alchemy Db1x00";
+}
 #endif
+
+
+#ifdef CONFIG_MIPS_MIRAGE
+char irq_tab_alchemy[][5] __initdata = {
+	[11] = { -1, AU1500_PCI_INTD, 0xff, 0xff, 0xff }, /* IDSEL 11 - SMI VGX */
+	[12] = { -1, 0xff, 0xff, AU1500_PCI_INTC, 0xff }, /* IDSEL 12 - PNX1300 */
+	[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 13 - miniPCI */
+};
+
+static void mirage_power_off(void)
+{
+	alchemy_gpio_direction_output(210, 1);
+}
+
+const char *get_system_type(void)
+{
+	return "Alchemy Mirage";
+}
+#endif
+
+
+#if defined(CONFIG_MIPS_BOSPORUS) || defined(CONFIG_MIPS_MIRAGE)
+static void mips_softreset(void)
+{
+	asm volatile ("jr\t%0" : : "r"(0xbfc00000));
 }
 
-void board_reset(void)
+#else
+
+const char *get_system_type(void)
 {
-	/* Hit BCSR.SW_RESET[RESET] */
-	bcsr->swreset = 0x0000;
+	return "Alchemy Db1x00";
 }
+#endif
+
 
 void __init board_setup(void)
 {
-	u32 pin_func = 0;
-	char *argptr;
-
-	argptr = prom_getcmdline();
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	argptr = strstr(argptr, "console=");
-	if (argptr == NULL) {
-		argptr = prom_getcmdline();
-		strcat(argptr, " console=ttyS0,115200");
-	}
+	unsigned long bcsr1, bcsr2;
+	u32 pin_func;
+
+	bcsr1 = DB1000_BCSR_PHYS_ADDR;
+	bcsr2 = DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS;
+
+	pin_func = 0;
+
+#ifdef CONFIG_MIPS_DB1000
+	printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n");
+#endif
+#ifdef CONFIG_MIPS_DB1500
+	printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n");
 #endif
+#ifdef CONFIG_MIPS_DB1100
+	printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n");
+#endif
+#ifdef CONFIG_MIPS_BOSPORUS
+	au1xxx_override_eth_cfg(0, &eth0_pdata);
 
-#ifdef CONFIG_FB_AU1100
-	argptr = strstr(argptr, "video=");
-	if (argptr == NULL) {
-		argptr = prom_getcmdline();
-		/* default panel */
-		/*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
-	}
+	printk(KERN_INFO "AMD Alchemy Bosporus Board\n");
 #endif
+#ifdef CONFIG_MIPS_MIRAGE
+	printk(KERN_INFO "AMD Alchemy Mirage Board\n");
+#endif
+#ifdef CONFIG_MIPS_DB1550
+	printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n");
 
-#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
-	/* au1000 does not support vra, au1500 and au1100 do */
-	strcat(argptr, " au1000_audio=vra");
-	argptr = prom_getcmdline();
+	bcsr1 = DB1550_BCSR_PHYS_ADDR;
+	bcsr2 = DB1550_BCSR_PHYS_ADDR + DB1550_BCSR_HEXLED_OFS;
 #endif
 
+	/* initialize board register space */
+	bcsr_init(bcsr1, bcsr2);
+
 	/* Not valid for Au1550 */
 #if defined(CONFIG_IRDA) && \
    (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
@@ -89,11 +169,10 @@ void __init board_setup(void)
 	pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
 	au_writel(pin_func, SYS_PINFUNC);
 	/* Power off until the driver is in use */
-	bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK;
-	bcsr->resets |=  BCSR_RESETS_IRDA_MODE_OFF;
-	au_sync();
+	bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK,
+				BCSR_RESETS_IRDA_MODE_OFF);
 #endif
-	bcsr->pcmcia = 0x0000; /* turn off PCMCIA power */
+	bcsr_write(BCSR_PCMCIA, 0);	/* turn off PCMCIA power */
 
 	/* Enable GPIO[31:0] inputs */
 	alchemy_gpio1_input_enable();
@@ -120,26 +199,53 @@ void __init board_setup(void)
 	 * be part of the audio driver.
 	 */
 	alchemy_gpio_direction_output(209, 1);
-#endif
-
-	au_sync();
 
-#ifdef CONFIG_MIPS_DB1000
-	printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n");
-#endif
-#ifdef CONFIG_MIPS_DB1500
-	printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n");
-#endif
-#ifdef CONFIG_MIPS_DB1100
-	printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n");
+	pm_power_off = mirage_power_off;
+	_machine_halt = mirage_power_off;
+	_machine_restart = (void(*)(char *))mips_softreset;
 #endif
+
 #ifdef CONFIG_MIPS_BOSPORUS
-	printk(KERN_INFO "AMD Alchemy Bosporus Board\n");
+	pm_power_off = bosporus_power_off;
+	_machine_halt = bosporus_power_off;
+	_machine_restart = (void(*)(char *))mips_softreset;
 #endif
-#ifdef CONFIG_MIPS_MIRAGE
-	printk(KERN_INFO "AMD Alchemy Mirage Board\n");
-#endif
-#ifdef CONFIG_MIPS_DB1550
-	printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n");
+	au_sync();
+}
+
+static int __init db1x00_init_irq(void)
+{
+#if defined(CONFIG_MIPS_MIRAGE)
+	set_irq_type(AU1500_GPIO7_INT, IRQF_TRIGGER_RISING); /* TS pendown */
+#elif defined(CONFIG_MIPS_DB1550)
+	set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW);  /* CD0# */
+	set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW);  /* CD1# */
+	set_irq_type(AU1550_GPIO3_INT, IRQF_TRIGGER_LOW);  /* CARD0# */
+	set_irq_type(AU1550_GPIO5_INT, IRQF_TRIGGER_LOW);  /* CARD1# */
+	set_irq_type(AU1550_GPIO21_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
+	set_irq_type(AU1550_GPIO22_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
+#elif defined(CONFIG_MIPS_DB1500)
+	set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
+	set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */
+	set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */
+	set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
+	set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
+	set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
+#elif defined(CONFIG_MIPS_DB1100)
+	set_irq_type(AU1100_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
+	set_irq_type(AU1100_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */
+	set_irq_type(AU1100_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */
+	set_irq_type(AU1100_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
+	set_irq_type(AU1100_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
+	set_irq_type(AU1100_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
+#elif defined(CONFIG_MIPS_DB1000)
+	set_irq_type(AU1000_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
+	set_irq_type(AU1000_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */
+	set_irq_type(AU1000_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */
+	set_irq_type(AU1000_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
+	set_irq_type(AU1000_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
+	set_irq_type(AU1000_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
 #endif
+	return 0;
 }
+arch_initcall(db1x00_init_irq);

arch/mips/alchemy/devboards/db1x00/irqmap.c

@@ -1,90 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	Au1xxx irq map table
- *
- * Copyright 2003 Embedded Edge, LLC
- *		dan@embeddededge.com
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
- *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
- *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-#ifdef CONFIG_MIPS_DB1500
-char irq_tab_alchemy[][5] __initdata = {
-	[12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT371   */
-	[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
-};
-#endif
-
-#ifdef CONFIG_MIPS_BOSPORUS
-char irq_tab_alchemy[][5] __initdata = {
-	[11] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 11 - miniPCI  */
-	[12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - SN1741   */
-	[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
-};
-#endif
-
-#ifdef CONFIG_MIPS_MIRAGE
-char irq_tab_alchemy[][5] __initdata = {
-	[11] = { -1, INTD, INTX, INTX, INTX }, /* IDSEL 11 - SMI VGX */
-	[12] = { -1, INTX, INTX, INTC, INTX }, /* IDSEL 12 - PNX1300 */
-	[13] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 13 - miniPCI */
-};
-#endif
-
-#ifdef CONFIG_MIPS_DB1550
-char irq_tab_alchemy[][5] __initdata = {
-	[11] = { -1, INTC, INTX, INTX, INTX }, /* IDSEL 11 - on-board HPT371 */
-	[12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
-	[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
-};
-#endif
-
-
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-
-#ifndef CONFIG_MIPS_MIRAGE
-#ifdef CONFIG_MIPS_DB1550
-	{ AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 IRQ# */
-	{ AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 IRQ# */
-#else
-	{ AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 Fully_Interted# */
-	{ AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 STSCHG# */
-	{ AU1000_GPIO_2, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 IRQ# */
-
-	{ AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 Fully_Interted# */
-	{ AU1000_GPIO_4, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 STSCHG# */
-	{ AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 IRQ# */
-#endif
-#else
-	{ AU1000_GPIO_7, IRQF_TRIGGER_RISING, 0 }, /* touchscreen pen down */
-#endif
-
-};
-
-void __init board_init_irq(void)
-{
-	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
-}

arch/mips/alchemy/devboards/db1x00/platform.c

@@ -0,0 +1,118 @@
+/*
+ * DBAu1xxx board platform device registration
+ *
+ * Copyright (C) 2009 Manuel Lauss
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-au1x00/au1xxx.h>
+#include <asm/mach-db1x00/bcsr.h>
+#include "../platform.h"
+
+/* DB1xxx PCMCIA interrupt sources:
+ * CD0/1 	GPIO0/3
+ * STSCHG0/1	GPIO1/4
+ * CARD0/1	GPIO2/5
+ * Db1550:	0/1, 21/22, 3/5
+ */
+
+#define DB1XXX_HAS_PCMCIA
+#define F_SWAPPED (bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT)
+
+#if defined(CONFIG_MIPS_DB1000)
+#define DB1XXX_PCMCIA_CD0	AU1000_GPIO0_INT
+#define DB1XXX_PCMCIA_STSCHG0	AU1000_GPIO1_INT
+#define DB1XXX_PCMCIA_CARD0	AU1000_GPIO2_INT
+#define DB1XXX_PCMCIA_CD1	AU1000_GPIO3_INT
+#define DB1XXX_PCMCIA_STSCHG1	AU1000_GPIO4_INT
+#define DB1XXX_PCMCIA_CARD1	AU1000_GPIO5_INT
+#define BOARD_FLASH_SIZE	0x02000000 /* 32MB */
+#define BOARD_FLASH_WIDTH	4 /* 32-bits */
+#elif defined(CONFIG_MIPS_DB1100)
+#define DB1XXX_PCMCIA_CD0	AU1100_GPIO0_INT
+#define DB1XXX_PCMCIA_STSCHG0	AU1100_GPIO1_INT
+#define DB1XXX_PCMCIA_CARD0	AU1100_GPIO2_INT
+#define DB1XXX_PCMCIA_CD1	AU1100_GPIO3_INT
+#define DB1XXX_PCMCIA_STSCHG1	AU1100_GPIO4_INT
+#define DB1XXX_PCMCIA_CARD1	AU1100_GPIO5_INT
+#define BOARD_FLASH_SIZE	0x02000000 /* 32MB */
+#define BOARD_FLASH_WIDTH	4 /* 32-bits */
+#elif defined(CONFIG_MIPS_DB1500)
+#define DB1XXX_PCMCIA_CD0	AU1500_GPIO0_INT
+#define DB1XXX_PCMCIA_STSCHG0	AU1500_GPIO1_INT
+#define DB1XXX_PCMCIA_CARD0	AU1500_GPIO2_INT
+#define DB1XXX_PCMCIA_CD1	AU1500_GPIO3_INT
+#define DB1XXX_PCMCIA_STSCHG1	AU1500_GPIO4_INT
+#define DB1XXX_PCMCIA_CARD1	AU1500_GPIO5_INT
+#define BOARD_FLASH_SIZE	0x02000000 /* 32MB */
+#define BOARD_FLASH_WIDTH	4 /* 32-bits */
+#elif defined(CONFIG_MIPS_DB1550)
+#define DB1XXX_PCMCIA_CD0	AU1550_GPIO0_INT
+#define DB1XXX_PCMCIA_STSCHG0	AU1550_GPIO21_INT
+#define DB1XXX_PCMCIA_CARD0	AU1550_GPIO3_INT
+#define DB1XXX_PCMCIA_CD1	AU1550_GPIO1_INT
+#define DB1XXX_PCMCIA_STSCHG1	AU1550_GPIO22_INT
+#define DB1XXX_PCMCIA_CARD1	AU1550_GPIO5_INT
+#define BOARD_FLASH_SIZE	0x08000000 /* 128MB */
+#define BOARD_FLASH_WIDTH	4 /* 32-bits */
+#else
+/* other board: no PCMCIA */
+#undef DB1XXX_HAS_PCMCIA
+#undef F_SWAPPED
+#define F_SWAPPED 0
+#if defined(CONFIG_MIPS_BOSPORUS)
+#define BOARD_FLASH_SIZE	0x01000000 /* 16MB */
+#define BOARD_FLASH_WIDTH	2 /* 16-bits */
+#elif defined(CONFIG_MIPS_MIRAGE)
+#define BOARD_FLASH_SIZE	0x04000000 /* 64MB */
+#define BOARD_FLASH_WIDTH	4 /* 32-bits */
+#endif
+#endif
+
+static int __init db1xxx_dev_init(void)
+{
+#ifdef DB1XXX_HAS_PCMCIA
+	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
+				    PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+				    PCMCIA_MEM_PHYS_ADDR,
+				    PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+				    PCMCIA_IO_PHYS_ADDR,
+				    PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+				    DB1XXX_PCMCIA_CARD0,
+				    DB1XXX_PCMCIA_CD0,
+				    /*DB1XXX_PCMCIA_STSCHG0*/0,
+				    0,
+				    0);
+
+	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
+				    PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
+				    PCMCIA_MEM_PHYS_ADDR  + 0x004000000,
+				    PCMCIA_MEM_PHYS_ADDR  + 0x004400000 - 1,
+				    PCMCIA_IO_PHYS_ADDR   + 0x004000000,
+				    PCMCIA_IO_PHYS_ADDR   + 0x004010000 - 1,
+				    DB1XXX_PCMCIA_CARD1,
+				    DB1XXX_PCMCIA_CD1,
+				    /*DB1XXX_PCMCIA_STSCHG1*/0,
+				    0,
+				    1);
+#endif
+	db1x_register_norflash(BOARD_FLASH_SIZE, BOARD_FLASH_WIDTH, F_SWAPPED);
+	return 0;
+}
+device_initcall(db1xxx_dev_init);

arch/mips/alchemy/devboards/pb1000/board_setup.c

@@ -31,11 +31,7 @@
 #include <asm/mach-pb1x00/pb1000.h>
 #include <prom.h>
 
-
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-	{ AU1000_GPIO_15, IRQF_TRIGGER_LOW, 0 },
-};
-
+#include "../platform.h"
 
 const char *get_system_type(void)
 {
@@ -46,25 +42,14 @@ void board_reset(void)
 {
 }
 
-void __init board_init_irq(void)
-{
-	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
-}
-
 void __init board_setup(void)
 {
 	u32 pin_func, static_cfg0;
 	u32 sys_freqctrl, sys_clksrc;
 	u32 prid = read_c0_prid();
 
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	char *argptr = prom_getcmdline();
-	argptr = strstr(argptr, "console=");
-	if (argptr == NULL) {
-		argptr = prom_getcmdline();
-		strcat(argptr, " console=ttyS0,115200");
-	}
-#endif
+	sys_freqctrl = 0;
+	sys_clksrc = 0;
 
 	/* Set AUX clock to 12 MHz * 8 = 96 MHz */
 	au_writel(8, SYS_AUXPLL);
@@ -193,3 +178,16 @@ void __init board_setup(void)
 		break;
 	}
 }
+
+static int __init pb1000_init_irq(void)
+{
+	set_irq_type(AU1000_GPIO15_INT, IRQF_TRIGGER_LOW);
+	return 0;
+}
+arch_initcall(pb1000_init_irq);
+
+static int __init pb1000_device_init(void)
+{
+	return db1x_register_norflash(8 * 1024 * 1024, 4, 0);
+}
+device_initcall(pb1000_device_init);

arch/mips/alchemy/devboards/pb1100/Makefile

@@ -5,4 +5,4 @@
 # Makefile for the Alchemy Semiconductor Pb1100 board.
 #
 
-obj-y := board_setup.o
+obj-y := board_setup.o platform.o

arch/mips/alchemy/devboards/pb1100/board_setup.c

@@ -29,19 +29,11 @@
 #include <linux/interrupt.h>
 
 #include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-pb1x00/pb1100.h>
+#include <asm/mach-db1x00/bcsr.h>
 
 #include <prom.h>
 
 
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-	{ AU1000_GPIO_9,  IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card Fully_Inserted# */
-	{ AU1000_GPIO_10, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card STSCHG# */
-	{ AU1000_GPIO_11, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card IRQ# */
-	{ AU1000_GPIO_13, IRQF_TRIGGER_LOW, 0 }, /* DC_IRQ# */
-};
-
-
 const char *get_system_type(void)
 {
 	return "Alchemy Pb1100";
@@ -49,43 +41,15 @@ const char *get_system_type(void)
 
 void board_reset(void)
 {
-	/* Hit BCSR.RST_VDDI[SOFT_RESET] */
-	au_writel(0x00000000, PB1100_RST_VDDI);
-}
-
-void __init board_init_irq(void)
-{
-	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
+	bcsr_write(BCSR_SYSTEM, 0);
 }
 
 void __init board_setup(void)
 {
 	volatile void __iomem *base = (volatile void __iomem *)0xac000000UL;
-	char *argptr;
-
-	argptr = prom_getcmdline();
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	argptr = strstr(argptr, "console=");
-	if (argptr == NULL) {
-		argptr = prom_getcmdline();
-		strcat(argptr, " console=ttyS0,115200");
-	}
-#endif
-
-#ifdef CONFIG_FB_AU1100
-	argptr = strstr(argptr, "video=");
-	if (argptr == NULL) {
-		argptr = prom_getcmdline();
-		/* default panel */
-		/*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
-	}
-#endif
 
-#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
-	/* au1000 does not support vra, au1500 and au1100 do */
-	strcat(argptr, " au1000_audio=vra");
-	argptr = prom_getcmdline();
-#endif
+	bcsr_init(DB1000_BCSR_PHYS_ADDR,
+		  DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS);
 
 	/* Set AUX clock to 12 MHz * 8 = 96 MHz */
 	au_writel(8, SYS_AUXPLL);
@@ -155,3 +119,14 @@ void __init board_setup(void)
 		au_sync();
 	}
 }
+
+static int __init pb1100_init_irq(void)
+{
+	set_irq_type(AU1100_GPIO9_INT,  IRQF_TRIGGER_LOW); /* PCCD# */
+	set_irq_type(AU1100_GPIO10_INT, IRQF_TRIGGER_LOW); /* PCSTSCHG# */
+	set_irq_type(AU1100_GPIO11_INT, IRQF_TRIGGER_LOW); /* PCCard# */
+	set_irq_type(AU1100_GPIO13_INT, IRQF_TRIGGER_LOW); /* DC_IRQ# */
+
+	return 0;
+}
+arch_initcall(pb1100_init_irq);

arch/mips/alchemy/devboards/pb1100/platform.c

@@ -0,0 +1,50 @@
+/*
+ * Pb1100 board platform device registration
+ *
+ * Copyright (C) 2009 Manuel Lauss
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+#include "../platform.h"
+
+static int __init pb1100_dev_init(void)
+{
+	int swapped;
+
+	/* PCMCIA. single socket, identical to Pb1500 */
+	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
+				    PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+				    PCMCIA_MEM_PHYS_ADDR,
+				    PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+				    PCMCIA_IO_PHYS_ADDR,
+				    PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+				    AU1100_GPIO11_INT,	 /* card */
+				    AU1100_GPIO9_INT,	 /* insert */
+				    /*AU1100_GPIO10_INT*/0, /* stschg */
+				    0,			 /* eject */
+				    0);			 /* id */
+
+	swapped = bcsr_read(BCSR_STATUS) &  BCSR_STATUS_DB1000_SWAPBOOT;
+	db1x_register_norflash(64 * 1024 * 1024, 4, swapped);
+
+	return 0;
+}
+device_initcall(pb1100_dev_init);

arch/mips/alchemy/devboards/pb1200/Makefile

@@ -2,6 +2,6 @@
 # Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards.
 #
 
-obj-y := board_setup.o irqmap.o platform.o
+obj-y := board_setup.o platform.o
 
 EXTRA_CFLAGS += -Werror

arch/mips/alchemy/devboards/pb1200/board_setup.c

@@ -25,11 +25,23 @@
  */
 
 #include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/sched.h>
 
-#include <prom.h>
-#include <au1xxx.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+#ifdef CONFIG_MIPS_PB1200
+#include <asm/mach-pb1x00/pb1200.h>
+#endif
+
+#ifdef CONFIG_MIPS_DB1200
+#include <asm/mach-db1x00/db1200.h>
+#define PB1200_INT_BEGIN DB1200_INT_BEGIN
+#define PB1200_INT_END DB1200_INT_END
+#endif
 
+#include <prom.h>
 
 const char *get_system_type(void)
 {
@@ -38,25 +50,15 @@ const char *get_system_type(void)
 
 void board_reset(void)
 {
-	bcsr->resets = 0;
-	bcsr->system = 0;
+	bcsr_write(BCSR_RESETS, 0);
+	bcsr_write(BCSR_SYSTEM, 0);
 }
 
 void __init board_setup(void)
 {
-	char *argptr;
-
-	argptr = prom_getcmdline();
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	argptr = strstr(argptr, "console=");
-	if (argptr == NULL) {
-		argptr = prom_getcmdline();
-		strcat(argptr, " console=ttyS0,115200");
-	}
-#endif
-#ifdef CONFIG_FB_AU1200
-	strcat(argptr, " video=au1200fb:panel:bs");
-#endif
+	printk(KERN_INFO "AMD Alchemy Pb1200 Board\n");
+	bcsr_init(PB1200_BCSR_PHYS_ADDR,
+		  PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS);
 
 #if 0
 	{
@@ -82,7 +84,7 @@ void __init board_setup(void)
 		u32 pin_func;
 
 		/* Select SMBus in CPLD */
-		bcsr->resets &= ~BCSR_RESETS_PCS0MUX;
+		bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0);
 
 		pin_func = au_readl(SYS_PINFUNC);
 		au_sync();
@@ -116,38 +118,54 @@ void __init board_setup(void)
 
 	/*
 	 * The Pb1200 development board uses external MUX for PSC0 to
-	 * support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
+	 * support SMB/SPI. bcsr_resets bit 12: 0=SMB 1=SPI
 	 */
 #ifdef CONFIG_I2C_AU1550
-	bcsr->resets &= ~BCSR_RESETS_PCS0MUX;
+	bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0);
 #endif
 	au_sync();
+}
 
-#ifdef CONFIG_MIPS_PB1200
-	printk(KERN_INFO "AMD Alchemy Pb1200 Board\n");
-#endif
-#ifdef CONFIG_MIPS_DB1200
-	printk(KERN_INFO "AMD Alchemy Db1200 Board\n");
-#endif
+static int __init pb1200_init_irq(void)
+{
+	/* We have a problem with CPLD rev 3. */
+	if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) {
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n");
+		printk(KERN_ERR "updated to latest revision. This software will\n");
+		printk(KERN_ERR "not work on anything less than CPLD rev 4.\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		printk(KERN_ERR "WARNING!!!\n");
+		panic("Game over.  Your score is 0.");
+	}
+
+	set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW);
+	bcsr_init_irq(PB1200_INT_BEGIN, PB1200_INT_END, AU1200_GPIO7_INT);
+
+	return 0;
 }
+arch_initcall(pb1200_init_irq);
+
 
 int board_au1200fb_panel(void)
 {
-	BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-	int p;
-
-	p = bcsr->switches;
-	p >>= 8;
-	p &= 0x0F;
-	return p;
+	return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f;
 }
 
 int board_au1200fb_panel_init(void)
 {
 	/* Apply power */
-	BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-
-	bcsr->board |= BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL;
+	bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
+				BCSR_BOARD_LCDBL);
 	/* printk(KERN_DEBUG "board_au1200fb_panel_init()\n"); */
 	return 0;
 }
@@ -155,10 +173,8 @@ int board_au1200fb_panel_init(void)
 int board_au1200fb_panel_shutdown(void)
 {
 	/* Remove power */
-	BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-
-	bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
-			 BCSR_BOARD_LCDBL);
+	bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
+			     BCSR_BOARD_LCDBL, 0);
 	/* printk(KERN_DEBUG "board_au1200fb_panel_shutdown()\n"); */
 	return 0;
 }

arch/mips/alchemy/devboards/pb1200/irqmap.c

@@ -1,134 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	Au1xxx irq map table
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
- *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
- *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-#ifdef CONFIG_MIPS_PB1200
-#include <asm/mach-pb1x00/pb1200.h>
-#endif
-
-#ifdef CONFIG_MIPS_DB1200
-#include <asm/mach-db1x00/db1200.h>
-#define PB1200_INT_BEGIN DB1200_INT_BEGIN
-#define PB1200_INT_END DB1200_INT_END
-#endif
-
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-	/* This is external interrupt cascade */
-	{ AU1000_GPIO_7, IRQF_TRIGGER_LOW, 0 },
-};
-
-
-/*
- * Support for External interrupts on the Pb1200 Development platform.
- */
-
-static void pb1200_cascade_handler(unsigned int irq, struct irq_desc *d)
-{
-	unsigned short bisr = bcsr->int_status;
-
-	for ( ; bisr; bisr &= bisr - 1)
-		generic_handle_irq(PB1200_INT_BEGIN + __ffs(bisr));
-}
-
-/* NOTE: both the enable and mask bits must be cleared, otherwise the
- * CPLD generates tons of spurious interrupts (at least on the DB1200).
- */
-static void pb1200_mask_irq(unsigned int irq_nr)
-{
-	bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
-	bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN);
-	au_sync();
-}
-
-static void pb1200_maskack_irq(unsigned int irq_nr)
-{
-	bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
-	bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN);
-	bcsr->int_status = 1 << (irq_nr - PB1200_INT_BEGIN);	/* ack */
-	au_sync();
-}
-
-static void pb1200_unmask_irq(unsigned int irq_nr)
-{
-	bcsr->intset = 1 << (irq_nr - PB1200_INT_BEGIN);
-	bcsr->intset_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
-	au_sync();
-}
-
-static struct irq_chip pb1200_cpld_irq_type = {
-#ifdef CONFIG_MIPS_PB1200
-	.name = "Pb1200 Ext",
-#endif
-#ifdef CONFIG_MIPS_DB1200
-	.name = "Db1200 Ext",
-#endif
-	.mask		= pb1200_mask_irq,
-	.mask_ack	= pb1200_maskack_irq,
-	.unmask		= pb1200_unmask_irq,
-};
-
-void __init board_init_irq(void)
-{
-	unsigned int irq;
-
-	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
-
-#ifdef CONFIG_MIPS_PB1200
-	/* We have a problem with CPLD rev 3. */
-	if (((bcsr->whoami & BCSR_WHOAMI_CPLD) >> 4) <= 3) {
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n");
-		printk(KERN_ERR "updated to latest revision. This software will\n");
-		printk(KERN_ERR "not work on anything less than CPLD rev 4.\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		printk(KERN_ERR "WARNING!!!\n");
-		panic("Game over.  Your score is 0.");
-	}
-#endif
-	/* mask & disable & ack all */
-	bcsr->intclr_mask = 0xffff;
-	bcsr->intclr = 0xffff;
-	bcsr->int_status = 0xffff;
-	au_sync();
-
-	for (irq = PB1200_INT_BEGIN; irq <= PB1200_INT_END; irq++)
-		set_irq_chip_and_handler_name(irq, &pb1200_cpld_irq_type,
-					 handle_level_irq, "level");
-
-	set_irq_chained_handler(AU1000_GPIO_7, pb1200_cascade_handler);
-}

arch/mips/alchemy/devboards/pb1200/platform.c

@@ -26,27 +26,30 @@
 
 #include <asm/mach-au1x00/au1xxx.h>
 #include <asm/mach-au1x00/au1100_mmc.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+#include "../platform.h"
 
 static int mmc_activity;
 
 static void pb1200mmc0_set_power(void *mmc_host, int state)
 {
 	if (state)
-		bcsr->board |= BCSR_BOARD_SD0PWR;
+		bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR);
 	else
-		bcsr->board &= ~BCSR_BOARD_SD0PWR;
+		bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0);
 
-	au_sync_delay(1);
+	msleep(1);
 }
 
 static int pb1200mmc0_card_readonly(void *mmc_host)
 {
-	return (bcsr->status & BCSR_STATUS_SD0WP) ? 1 : 0;
+	return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 1 : 0;
 }
 
 static int pb1200mmc0_card_inserted(void *mmc_host)
 {
-	return (bcsr->sig_status & BCSR_INT_SD0INSERT) ? 1 : 0;
+	return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) ? 1 : 0;
 }
 
 static void pb1200_mmcled_set(struct led_classdev *led,
@@ -54,10 +57,10 @@ static void pb1200_mmcled_set(struct led_classdev *led,
 {
 	if (brightness != LED_OFF) {
 		if (++mmc_activity == 1)
-			bcsr->disk_leds &= ~(1 << 8);
+			bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0);
 	} else {
 		if (--mmc_activity == 0)
-			bcsr->disk_leds |= (1 << 8);
+			bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0);
 	}
 }
 
@@ -65,27 +68,25 @@ static struct led_classdev pb1200mmc_led = {
 	.brightness_set	= pb1200_mmcled_set,
 };
 
-#ifndef CONFIG_MIPS_DB1200
 static void pb1200mmc1_set_power(void *mmc_host, int state)
 {
 	if (state)
-		bcsr->board |= BCSR_BOARD_SD1PWR;
+		bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD1PWR);
 	else
-		bcsr->board &= ~BCSR_BOARD_SD1PWR;
+		bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD1PWR, 0);
 
-	au_sync_delay(1);
+	msleep(1);
 }
 
 static int pb1200mmc1_card_readonly(void *mmc_host)
 {
-	return (bcsr->status & BCSR_STATUS_SD1WP) ? 1 : 0;
+	return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD1WP) ? 1 : 0;
 }
 
 static int pb1200mmc1_card_inserted(void *mmc_host)
 {
-	return (bcsr->sig_status & BCSR_INT_SD1INSERT) ? 1 : 0;
+	return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0;
 }
-#endif
 
 const struct au1xmmc_platform_data au1xmmc_platdata[2] = {
 	[0] = {
@@ -95,7 +96,6 @@ const struct au1xmmc_platform_data au1xmmc_platdata[2] = {
 		.cd_setup	= NULL,		/* use poll-timer in driver */
 		.led		= &pb1200mmc_led,
 	},
-#ifndef CONFIG_MIPS_DB1200
 	[1] = {
 		.set_power	= pb1200mmc1_set_power,
 		.card_inserted	= pb1200mmc1_card_inserted,
@@ -103,7 +103,6 @@ const struct au1xmmc_platform_data au1xmmc_platdata[2] = {
 		.cd_setup	= NULL,		/* use poll-timer in driver */
 		.led		= &pb1200mmc_led,
 	},
-#endif
 };
 
 static struct resource ide_resources[] = {
@@ -169,8 +168,36 @@ static struct platform_device *board_platform_devices[] __initdata = {
 
 static int __init board_register_devices(void)
 {
+	int swapped;
+
+	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
+				    PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+				    PCMCIA_MEM_PHYS_ADDR,
+				    PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+				    PCMCIA_IO_PHYS_ADDR,
+				    PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+				    PB1200_PC0_INT,
+				    PB1200_PC0_INSERT_INT,
+				    /*PB1200_PC0_STSCHG_INT*/0,
+				    PB1200_PC0_EJECT_INT,
+				    0);
+
+	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x008000000,
+				    PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1,
+				    PCMCIA_MEM_PHYS_ADDR  + 0x008000000,
+				    PCMCIA_MEM_PHYS_ADDR  + 0x008400000 - 1,
+				    PCMCIA_IO_PHYS_ADDR   + 0x008000000,
+				    PCMCIA_IO_PHYS_ADDR   + 0x008010000 - 1,
+				    PB1200_PC1_INT,
+				    PB1200_PC1_INSERT_INT,
+				    /*PB1200_PC1_STSCHG_INT*/0,
+				    PB1200_PC1_EJECT_INT,
+				    1);
+
+	swapped = bcsr_read(BCSR_STATUS) &  BCSR_STATUS_DB1200_SWAPBOOT;
+	db1x_register_norflash(128 * 1024 * 1024, 2, swapped);
+
 	return platform_add_devices(board_platform_devices,
 				    ARRAY_SIZE(board_platform_devices));
 }
-
-arch_initcall(board_register_devices);
+device_initcall(board_register_devices);

arch/mips/alchemy/devboards/pb1500/Makefile

@@ -5,4 +5,4 @@
 # Makefile for the Alchemy Semiconductor Pb1500 board.
 #
 
-obj-y := board_setup.o
+obj-y := board_setup.o platform.o

arch/mips/alchemy/devboards/pb1500/board_setup.c

@@ -29,22 +29,14 @@
 #include <linux/interrupt.h>
 
 #include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-pb1x00/pb1500.h>
+#include <asm/mach-db1x00/bcsr.h>
 
 #include <prom.h>
 
 
 char irq_tab_alchemy[][5] __initdata = {
-	[12] = { -1, INTA, INTX, INTX, INTX },   /* IDSEL 12 - HPT370	*/
-	[13] = { -1, INTA, INTB, INTC, INTD },   /* IDSEL 13 - PCI slot */
-};
-
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-	{ AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 },
-	{ AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 },
-	{ AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 },
-	{ AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 },
-	{ AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 },
+	[12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff },   /* IDSEL 12 - HPT370	*/
+	[13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD },   /* IDSEL 13 - PCI slot */
 };
 
 
@@ -55,35 +47,16 @@ const char *get_system_type(void)
 
 void board_reset(void)
 {
-	/* Hit BCSR.RST_VDDI[SOFT_RESET] */
-	au_writel(0x00000000, PB1500_RST_VDDI);
-}
-
-void __init board_init_irq(void)
-{
-	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
+	bcsr_write(BCSR_SYSTEM, 0);
 }
 
 void __init board_setup(void)
 {
 	u32 pin_func;
 	u32 sys_freqctrl, sys_clksrc;
-	char *argptr;
-
-	argptr = prom_getcmdline();
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	argptr = strstr(argptr, "console=");
-	if (argptr == NULL) {
-		argptr = prom_getcmdline();
-		strcat(argptr, " console=ttyS0,115200");
-	}
-#endif
 
-#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
-	/* au1000 does not support vra, au1500 and au1100 do */
-	strcat(argptr, " au1000_audio=vra");
-	argptr = prom_getcmdline();
-#endif
+	bcsr_init(DB1000_BCSR_PHYS_ADDR,
+		  DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS);
 
 	sys_clksrc = sys_freqctrl = pin_func = 0;
 	/* Set AUX clock to 12 MHz * 8 = 96 MHz */
@@ -163,3 +136,18 @@ void __init board_setup(void)
 		au_sync();
 	}
 }
+
+static int __init pb1500_init_irq(void)
+{
+	set_irq_type(AU1500_GPIO9_INT, IRQF_TRIGGER_LOW);   /* CD0# */
+	set_irq_type(AU1500_GPIO10_INT, IRQF_TRIGGER_LOW);  /* CARD0 */
+	set_irq_type(AU1500_GPIO11_INT, IRQF_TRIGGER_LOW);  /* STSCHG0# */
+	set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
+	set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW);
+
+	return 0;
+}
+arch_initcall(pb1500_init_irq);

arch/mips/alchemy/devboards/pb1500/platform.c

@@ -0,0 +1,49 @@
+/*
+ * Pb1500 board platform device registration
+ *
+ * Copyright (C) 2009 Manuel Lauss
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+#include "../platform.h"
+
+static int __init pb1500_dev_init(void)
+{
+	int swapped;
+
+	/* PCMCIA. single socket, identical to Pb1500 */
+	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
+				    PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+				    PCMCIA_MEM_PHYS_ADDR,
+				    PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+				    PCMCIA_IO_PHYS_ADDR,
+				    PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+				    AU1500_GPIO11_INT,	 /* card */
+				    AU1500_GPIO9_INT,	 /* insert */
+				    /*AU1500_GPIO10_INT*/0, /* stschg */
+				    0,			 /* eject */
+				    0);			 /* id */
+
+	swapped = bcsr_read(BCSR_STATUS) &  BCSR_STATUS_DB1000_SWAPBOOT;
+	db1x_register_norflash(64 * 1024 * 1024, 4, swapped);
+
+	return 0;
+}
+device_initcall(pb1500_dev_init);

arch/mips/alchemy/devboards/pb1550/Makefile

@@ -5,4 +5,4 @@
 # Makefile for the Alchemy Semiconductor Pb1550 board.
 #
 
-obj-y := board_setup.o
+obj-y := board_setup.o platform.o

arch/mips/alchemy/devboards/pb1550/board_setup.c

@@ -32,18 +32,15 @@
 
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-pb1x00/pb1550.h>
+#include <asm/mach-db1x00/bcsr.h>
+#include <asm/mach-au1x00/gpio.h>
 
 #include <prom.h>
 
 
 char irq_tab_alchemy[][5] __initdata = {
-	[12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left)  */
-	[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
-};
-
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-	{ AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 },
-	{ AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 },
+	[12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left)  */
+	[13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */
 };
 
 const char *get_system_type(void)
@@ -53,28 +50,17 @@ const char *get_system_type(void)
 
 void board_reset(void)
 {
-	/* Hit BCSR.SYSTEM[RESET] */
-	au_writew(au_readw(0xAF00001C) & ~BCSR_SYSTEM_RESET, 0xAF00001C);
-}
-
-void __init board_init_irq(void)
-{
-	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
+	bcsr_write(BCSR_SYSTEM, 0);
 }
 
 void __init board_setup(void)
 {
 	u32 pin_func;
 
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	char *argptr;
-	argptr = prom_getcmdline();
-	argptr = strstr(argptr, "console=");
-	if (argptr == NULL) {
-		argptr = prom_getcmdline();
-		strcat(argptr, " console=ttyS0,115200");
-	}
-#endif
+	bcsr_init(PB1550_BCSR_PHYS_ADDR,
+		  PB1550_BCSR_PHYS_ADDR + PB1550_BCSR_HEXLED_OFS);
+
+	alchemy_gpio2_enable();
 
 	/*
 	 * Enable PSC1 SYNC for AC'97.  Normaly done in audio driver,
@@ -85,8 +71,21 @@ void __init board_setup(void)
 	pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
 	au_writel(pin_func, SYS_PINFUNC);
 
-	au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */
-	au_sync();
+	bcsr_write(BCSR_PCMCIA, 0);	/* turn off PCMCIA power */
 
 	printk(KERN_INFO "AMD Alchemy Pb1550 Board\n");
 }
+
+static int __init pb1550_init_irq(void)
+{
+	set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1550_GPIO201_205_INT, IRQF_TRIGGER_HIGH);
+
+	/* enable both PCMCIA card irqs in the shared line */
+	alchemy_gpio2_enable_int(201);
+	alchemy_gpio2_enable_int(202);
+
+	return 0;
+}
+arch_initcall(pb1550_init_irq);

arch/mips/alchemy/devboards/pb1550/platform.c

@@ -0,0 +1,69 @@
+/*
+ * Pb1550 board platform device registration
+ *
+ * Copyright (C) 2009 Manuel Lauss
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-pb1x00/pb1550.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+#include "../platform.h"
+
+static int __init pb1550_dev_init(void)
+{
+	int swapped;
+
+	/* Pb1550, like all others, also has statuschange irqs; however they're
+	* wired up on one of the Au1550's shared GPIO201_205 line, which also
+	* services the PCMCIA card interrupts.  So we ignore statuschange and
+	* use the GPIO201_205 exclusively for card interrupts, since a) pcmcia
+	* drivers are used to shared irqs and b) statuschange isn't really use-
+	* ful anyway.
+	*/
+	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR,
+				    PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+				    PCMCIA_MEM_PHYS_ADDR,
+				    PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
+				    PCMCIA_IO_PHYS_ADDR,
+				    PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
+				    AU1550_GPIO201_205_INT,
+				    AU1550_GPIO0_INT,
+				    0,
+				    0,
+				    0);
+
+	db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x008000000,
+				    PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1,
+				    PCMCIA_MEM_PHYS_ADDR  + 0x008000000,
+				    PCMCIA_MEM_PHYS_ADDR  + 0x008400000 - 1,
+				    PCMCIA_IO_PHYS_ADDR   + 0x008000000,
+				    PCMCIA_IO_PHYS_ADDR   + 0x008010000 - 1,
+				    AU1550_GPIO201_205_INT,
+				    AU1550_GPIO1_INT,
+				    0,
+				    0,
+				    1);
+
+	swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_PB1550_SWAPBOOT;
+	db1x_register_norflash(128 * 1024 * 1024, 4, swapped);
+
+	return 0;
+}
+device_initcall(pb1550_dev_init);

arch/mips/alchemy/devboards/platform.c

@@ -0,0 +1,222 @@
+/*
+ * devoard misc stuff.
+ */
+
+#include <linux/init.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/physmap.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+
+#include <asm/reboot.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+static void db1x_power_off(void)
+{
+	bcsr_write(BCSR_RESETS, 0);
+	bcsr_write(BCSR_SYSTEM, BCSR_SYSTEM_PWROFF | BCSR_SYSTEM_RESET);
+}
+
+static void db1x_reset(char *c)
+{
+	bcsr_write(BCSR_RESETS, 0);
+	bcsr_write(BCSR_SYSTEM, 0);
+}
+
+static int __init db1x_poweroff_setup(void)
+{
+	if (!pm_power_off)
+		pm_power_off = db1x_power_off;
+	if (!_machine_halt)
+		_machine_halt = db1x_power_off;
+	if (!_machine_restart)
+		_machine_restart = db1x_reset;
+
+	return 0;
+}
+late_initcall(db1x_poweroff_setup);
+
+/* register a pcmcia socket */
+int __init db1x_register_pcmcia_socket(phys_addr_t pcmcia_attr_start,
+				       phys_addr_t pcmcia_attr_end,
+				       phys_addr_t pcmcia_mem_start,
+				       phys_addr_t pcmcia_mem_end,
+				       phys_addr_t pcmcia_io_start,
+				       phys_addr_t pcmcia_io_end,
+				       int card_irq,
+				       int cd_irq,
+				       int stschg_irq,
+				       int eject_irq,
+				       int id)
+{
+	int cnt, i, ret;
+	struct resource *sr;
+	struct platform_device *pd;
+
+	cnt = 5;
+	if (eject_irq)
+		cnt++;
+	if (stschg_irq)
+		cnt++;
+
+	sr = kzalloc(sizeof(struct resource) * cnt, GFP_KERNEL);
+	if (!sr)
+		return -ENOMEM;
+
+	pd = platform_device_alloc("db1xxx_pcmcia", id);
+	if (!pd) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	sr[0].name	= "pcmcia-attr";
+	sr[0].flags	= IORESOURCE_MEM;
+	sr[0].start	= pcmcia_attr_start;
+	sr[0].end	= pcmcia_attr_end;
+
+	sr[1].name	= "pcmcia-mem";
+	sr[1].flags	= IORESOURCE_MEM;
+	sr[1].start	= pcmcia_mem_start;
+	sr[1].end	= pcmcia_mem_end;
+
+	sr[2].name	= "pcmcia-io";
+	sr[2].flags	= IORESOURCE_MEM;
+	sr[2].start	= pcmcia_io_start;
+	sr[2].end	= pcmcia_io_end;
+
+	sr[3].name	= "insert";
+	sr[3].flags	= IORESOURCE_IRQ;
+	sr[3].start = sr[3].end = cd_irq;
+
+	sr[4].name	= "card";
+	sr[4].flags	= IORESOURCE_IRQ;
+	sr[4].start = sr[4].end = card_irq;
+
+	i = 5;
+	if (stschg_irq) {
+		sr[i].name	= "stschg";
+		sr[i].flags	= IORESOURCE_IRQ;
+		sr[i].start = sr[i].end = stschg_irq;
+		i++;
+	}
+	if (eject_irq) {
+		sr[i].name	= "eject";
+		sr[i].flags	= IORESOURCE_IRQ;
+		sr[i].start = sr[i].end = eject_irq;
+	}
+
+	pd->resource = sr;
+	pd->num_resources = cnt;
+
+	ret = platform_device_add(pd);
+	if (!ret)
+		return 0;
+
+	platform_device_put(pd);
+out:
+	kfree(sr);
+	return ret;
+}
+
+#define YAMON_SIZE	0x00100000
+#define YAMON_ENV_SIZE	0x00040000
+
+int __init db1x_register_norflash(unsigned long size, int width,
+				  int swapped)
+{
+	struct physmap_flash_data *pfd;
+	struct platform_device *pd;
+	struct mtd_partition *parts;
+	struct resource *res;
+	int ret, i;
+
+	if (size < (8 * 1024 * 1024))
+		return -EINVAL;
+
+	ret = -ENOMEM;
+	parts = kzalloc(sizeof(struct mtd_partition) * 5, GFP_KERNEL);
+	if (!parts)
+		goto out;
+
+	res = kzalloc(sizeof(struct resource), GFP_KERNEL);
+	if (!res)
+		goto out1;
+
+	pfd = kzalloc(sizeof(struct physmap_flash_data), GFP_KERNEL);
+	if (!pfd)
+		goto out2;
+
+	pd = platform_device_alloc("physmap-flash", 0);
+	if (!pd)
+		goto out3;
+
+	/* NOR flash ends at 0x20000000, regardless of size */
+	res->start = 0x20000000 - size;
+	res->end = 0x20000000 - 1;
+	res->flags = IORESOURCE_MEM;
+
+	/* partition setup.  Most Develboards have a switch which allows
+	 * to swap the physical locations of the 2 NOR flash banks.
+	 */
+	i = 0;
+	if (!swapped) {
+		/* first NOR chip */
+		parts[i].offset = 0;
+		parts[i].name = "User FS";
+		parts[i].size = size / 2;
+		i++;
+	}
+
+	parts[i].offset = MTDPART_OFS_APPEND;
+	parts[i].name = "User FS 2";
+	parts[i].size = (size / 2) - (0x20000000 - 0x1fc00000);
+	i++;
+
+	parts[i].offset = MTDPART_OFS_APPEND;
+	parts[i].name = "YAMON";
+	parts[i].size = YAMON_SIZE;
+	parts[i].mask_flags = MTD_WRITEABLE;
+	i++;
+
+	parts[i].offset = MTDPART_OFS_APPEND;
+	parts[i].name = "raw kernel";
+	parts[i].size = 0x00400000 - YAMON_SIZE - YAMON_ENV_SIZE;
+	i++;
+
+	parts[i].offset = MTDPART_OFS_APPEND;
+	parts[i].name = "YAMON Env";
+	parts[i].size = YAMON_ENV_SIZE;
+	parts[i].mask_flags = MTD_WRITEABLE;
+	i++;
+
+	if (swapped) {
+		parts[i].offset = MTDPART_OFS_APPEND;
+		parts[i].name = "User FS";
+		parts[i].size = size / 2;
+		i++;
+	}
+
+	pfd->width = width;
+	pfd->parts = parts;
+	pfd->nr_parts = 5;
+
+	pd->dev.platform_data = pfd;
+	pd->resource = res;
+	pd->num_resources = 1;
+
+	ret = platform_device_add(pd);
+	if (!ret)
+		return ret;
+
+	platform_device_put(pd);
+out3:
+	kfree(pfd);
+out2:
+	kfree(res);
+out1:
+	kfree(parts);
+out:
+	return ret;
+}

arch/mips/alchemy/devboards/platform.h

@@ -0,0 +1,21 @@
+#ifndef _DEVBOARD_PLATFORM_H_
+#define _DEVBOARD_PLATFORM_H_
+
+#include <linux/init.h>
+
+int __init db1x_register_pcmcia_socket(phys_addr_t pcmcia_attr_start,
+				       phys_addr_t pcmcia_attr_len,
+				       phys_addr_t pcmcia_mem_start,
+				       phys_addr_t pcmcia_mem_end,
+				       phys_addr_t pcmcia_io_start,
+				       phys_addr_t pcmcia_io_end,
+				       int card_irq,
+				       int cd_irq,
+				       int stschg_irq,
+				       int eject_irq,
+				       int id);
+
+int __init db1x_register_norflash(unsigned long size, int width,
+				  int swapped);
+
+#endif

arch/mips/alchemy/devboards/pm.c

@@ -10,6 +10,7 @@
 #include <linux/sysfs.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/gpio.h>
+#include <asm/mach-db1x00/bcsr.h>
 
 /*
  * Generic suspend userspace interface for Alchemy development boards.
@@ -26,6 +27,20 @@ static unsigned long db1x_pm_last_wakesrc;
 
 static int db1x_pm_enter(suspend_state_t state)
 {
+	unsigned short bcsrs[16];
+	int i, j, hasint;
+
+	/* save CPLD regs */
+	hasint = bcsr_read(BCSR_WHOAMI);
+	hasint = BCSR_WHOAMI_BOARD(hasint) >= BCSR_WHOAMI_DB1200;
+	j = (hasint) ? BCSR_MASKSET : BCSR_SYSTEM;
+
+	for (i = BCSR_STATUS; i <= j; i++)
+		bcsrs[i] = bcsr_read(i);
+
+	/* shut off hexleds */
+	bcsr_write(BCSR_HEXCLEAR, 3);
+
 	/* enable GPIO based wakeup */
 	alchemy_gpio1_input_enable();
 
@@ -52,6 +67,23 @@ static int db1x_pm_enter(suspend_state_t state)
 	/* ...and now the sandman can come! */
 	au_sleep();
 
+
+	/* restore CPLD regs */
+	for (i = BCSR_STATUS; i <= BCSR_SYSTEM; i++)
+		bcsr_write(i, bcsrs[i]);
+
+	/* restore CPLD int registers */
+	if (hasint) {
+		bcsr_write(BCSR_INTCLR, 0xffff);
+		bcsr_write(BCSR_MASKCLR, 0xffff);
+		bcsr_write(BCSR_INTSTAT, 0xffff);
+		bcsr_write(BCSR_INTSET, bcsrs[BCSR_INTSET]);
+		bcsr_write(BCSR_MASKSET, bcsrs[BCSR_MASKSET]);
+	}
+
+	/* light up hexleds */
+	bcsr_write(BCSR_HEXCLEAR, 0);
+
 	return 0;
 }
 

arch/mips/alchemy/devboards/prom.c

@@ -60,3 +60,8 @@ void __init prom_init(void)
 		strict_strtoul(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
+
+void prom_putchar(unsigned char c)
+{
+    alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+}

arch/mips/alchemy/mtx-1/Makefile

@@ -6,7 +6,7 @@
 # Makefile for 4G Systems MTX-1 board.
 #
 
-lib-y := init.o board_setup.o irqmap.o
+lib-y := init.o board_setup.o
 obj-y := platform.o
 
 EXTRA_CFLAGS += -Werror

arch/mips/alchemy/mtx-1/board_setup.c

@@ -30,32 +30,43 @@
 
 #include <linux/gpio.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
 
+#include <asm/reboot.h>
 #include <asm/mach-au1x00/au1000.h>
 
 #include <prom.h>
 
+char irq_tab_alchemy[][5] __initdata = {
+	[0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 00 - AdapterA-Slot0 (top) */
+	[1] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
+	[2] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 02 - AdapterB-Slot0 (top) */
+	[3] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
+	[4] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 04 - AdapterC-Slot0 (top) */
+	[5] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
+	[6] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 06 - AdapterD-Slot0 (top) */
+	[7] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
+};
+
 extern int (*board_pci_idsel)(unsigned int devsel, int assert);
 int mtx1_pci_idsel(unsigned int devsel, int assert);
 
-void board_reset(void)
+static void mtx1_reset(char *c)
 {
 	/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
 	au_writel(0x00000000, 0xAE00001C);
 }
 
-void __init board_setup(void)
+static void mtx1_power_off(void)
 {
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	char *argptr;
-	argptr = prom_getcmdline();
-	argptr = strstr(argptr, "console=");
-	if (argptr == NULL) {
-		argptr = prom_getcmdline();
-		strcat(argptr, " console=ttyS0,115200");
-	}
-#endif
+	printk(KERN_ALERT "It's now safe to remove power\n");
+	while (1)
+		asm volatile (".set mips3 ; wait ; .set mips1");
+}
 
+void __init board_setup(void)
+{
 	alchemy_gpio2_enable();
 
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
@@ -86,6 +97,10 @@ void __init board_setup(void)
 	alchemy_gpio_direction_output(211, 1);	/* green on */
 	alchemy_gpio_direction_output(212, 0);	/* red off */
 
+	pm_power_off = mtx1_power_off;
+	_machine_halt = mtx1_power_off;
+	_machine_restart = mtx1_reset;
+
 	printk(KERN_INFO "4G Systems MTX-1 Board\n");
 }
 
@@ -109,3 +124,15 @@ mtx1_pci_idsel(unsigned int devsel, int assert)
 	au_sync_udelay(1);
 	return 1;
 }
+
+static int __init mtx1_init_irq(void)
+{
+	set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
+	set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW);
+
+	return 0;
+}
+arch_initcall(mtx1_init_irq);

arch/mips/alchemy/mtx-1/init.c

@@ -32,6 +32,7 @@
 #include <linux/init.h>
 
 #include <asm/bootinfo.h>
+#include <asm/mach-au1x00/au1000.h>
 
 #include <prom.h>
 
@@ -58,3 +59,8 @@ void __init prom_init(void)
 		strict_strtoul(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
+
+void prom_putchar(unsigned char c)
+{
+	alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+}

arch/mips/alchemy/mtx-1/irqmap.c

@@ -1,56 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	Au1xxx irq map table
- *
- * Copyright 2003 Embedded Edge, LLC
- *		dan@embeddededge.com
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
- *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
- *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <asm/mach-au1x00/au1000.h>
-
-char irq_tab_alchemy[][5] __initdata = {
-	[0] = { -1, INTA, INTA, INTX, INTX }, /* IDSEL 00 - AdapterA-Slot0 (top) */
-	[1] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
-	[2] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 02 - AdapterB-Slot0 (top) */
-	[3] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
-	[4] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 04 - AdapterC-Slot0 (top) */
-	[5] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
-	[6] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 06 - AdapterD-Slot0 (top) */
-	[7] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
-};
-
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-       { AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 },
-       { AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 },
-       { AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 },
-       { AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 },
-       { AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 },
-};
-
-
-void __init board_init_irq(void)
-{
-	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
-}

arch/mips/alchemy/xxs1500/Makefile

@@ -5,4 +5,6 @@
 # Makefile for MyCable XXS1500 board.
 #
 
-lib-y := init.o board_setup.o irqmap.o
+lib-y := init.o board_setup.o platform.o
+
+EXTRA_CFLAGS += -Werror

arch/mips/alchemy/xxs1500/board_setup.c

@@ -25,31 +25,35 @@
 
 #include <linux/gpio.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/delay.h>
+#include <linux/pm.h>
 
+#include <asm/reboot.h>
 #include <asm/mach-au1x00/au1000.h>
 
 #include <prom.h>
 
-void board_reset(void)
+static void xxs1500_reset(char *c)
 {
 	/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
 	au_writel(0x00000000, 0xAE00001C);
 }
 
+static void xxs1500_power_off(void)
+{
+	printk(KERN_ALERT "It's now safe to remove power\n");
+	while (1)
+		asm volatile (".set mips3 ; wait ; .set mips1");
+}
+
 void __init board_setup(void)
 {
 	u32 pin_func;
 
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	char *argptr;
-	argptr = prom_getcmdline();
-	argptr = strstr(argptr, "console=");
-	if (argptr == NULL) {
-		argptr = prom_getcmdline();
-		strcat(argptr, " console=ttyS0,115200");
-	}
-#endif
+	pm_power_off = xxs1500_power_off;
+	_machine_halt = xxs1500_power_off;
+	_machine_restart = xxs1500_reset;
 
 	alchemy_gpio1_input_enable();
 	alchemy_gpio2_enable();
@@ -68,22 +72,6 @@ void __init board_setup(void)
 	/* Enable DTR = USB power up */
 	au_writel(0x01, UART3_ADDR + UART_MCR); /* UART_MCR_DTR is 0x01??? */
 
-#ifdef CONFIG_PCMCIA_XXS1500
-	/* GPIO 0, 1, and 4 are inputs */
-	alchemy_gpio_direction_input(0);
-	alchemy_gpio_direction_input(1);
-	alchemy_gpio_direction_input(4);
-
-	/* GPIO2 208/9/10/11 are inputs */
-	alchemy_gpio_direction_input(208);
-	alchemy_gpio_direction_input(209);
-	alchemy_gpio_direction_input(210);
-	alchemy_gpio_direction_input(211);
-
-	/* Turn off power */
-	alchemy_gpio_direction_output(214, 0);
-#endif
-
 #ifdef CONFIG_PCI
 #if defined(__MIPSEB__)
 	au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
@@ -92,3 +80,23 @@ void __init board_setup(void)
 #endif
 #endif
 }
+
+static int __init xxs1500_init_irq(void)
+{
+	set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
+	set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO207_INT, IRQF_TRIGGER_LOW);
+
+	set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW);
+	set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* CF irq */
+	set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW);
+
+	return 0;
+}
+arch_initcall(xxs1500_init_irq);

arch/mips/alchemy/xxs1500/init.c

@@ -30,6 +30,7 @@
 #include <linux/kernel.h>
 
 #include <asm/bootinfo.h>
+#include <asm/mach-au1x00/au1000.h>
 
 #include <prom.h>
 
@@ -56,3 +57,8 @@ void __init prom_init(void)
 		strict_strtoul(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
+
+void prom_putchar(unsigned char c)
+{
+	alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+}

arch/mips/alchemy/xxs1500/irqmap.c

@@ -1,52 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	Au1xxx irq map table
- *
- * Copyright 2003 Embedded Edge, LLC
- *		dan@embeddededge.com
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
- *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
- *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <asm/mach-au1x00/au1000.h>
-
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-	{ AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 },
-	{ AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 },
-	{ AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 },
-	{ AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 },
-	{ AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 },
-	{ AU1500_GPIO_207, IRQF_TRIGGER_LOW, 0 },
-
-	{ AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 },
-	{ AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 },
-	{ AU1000_GPIO_2, IRQF_TRIGGER_LOW, 0 },
-	{ AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 },
-	{ AU1000_GPIO_4, IRQF_TRIGGER_LOW, 0 }, /* CF interrupt */
-	{ AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 },
-};
-
-void __init board_init_irq(void)
-{
-	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
-}

arch/mips/alchemy/xxs1500/platform.c

@@ -0,0 +1,63 @@
+/*
+ * XXS1500 board platform device registration
+ *
+ * Copyright (C) 2009 Manuel Lauss
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-au1x00/au1000.h>
+
+static struct resource xxs1500_pcmcia_res[] = {
+	{
+		.name	= "pcmcia-io",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_IO_PHYS_ADDR,
+		.end	= PCMCIA_IO_PHYS_ADDR + 0x000400000 - 1,
+	},
+	{
+		.name	= "pcmcia-attr",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_ATTR_PHYS_ADDR,
+		.end	= PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
+	},
+	{
+		.name	= "pcmcia-mem",
+		.flags	= IORESOURCE_MEM,
+		.start	= PCMCIA_MEM_PHYS_ADDR,
+		.end	= PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
+	},
+};
+
+static struct platform_device xxs1500_pcmcia_dev = {
+	.name		= "xxs1500_pcmcia",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(xxs1500_pcmcia_res),
+	.resource	= xxs1500_pcmcia_res,
+};
+
+static struct platform_device *xxs1500_devs[] __initdata = {
+	&xxs1500_pcmcia_dev,
+};
+
+static int __init xxs1500_dev_init(void)
+{
+	return platform_add_devices(xxs1500_devs,
+				    ARRAY_SIZE(xxs1500_devs));
+}
+device_initcall(xxs1500_dev_init);

arch/mips/ar7/clock.c

@@ -1,6 +1,7 @@
 /*
  * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
  * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
+ * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -24,6 +25,8 @@
 #include <linux/delay.h>
 #include <linux/gcd.h>
 #include <linux/io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/addrspace.h>
 #include <asm/mach-ar7/ar7.h>
@@ -94,12 +97,16 @@ struct tnetd7200_clocks {
 	struct tnetd7200_clock usb;
 };
 
-int ar7_cpu_clock = 150000000;
-EXPORT_SYMBOL(ar7_cpu_clock);
-int ar7_bus_clock = 125000000;
-EXPORT_SYMBOL(ar7_bus_clock);
-int ar7_dsp_clock;
-EXPORT_SYMBOL(ar7_dsp_clock);
+static struct clk bus_clk = {
+	.rate	= 125000000,
+};
+
+static struct clk cpu_clk = {
+	.rate	= 150000000,
+};
+
+static struct clk dsp_clk;
+static struct clk vbus_clk;
 
 static void approximate(int base, int target, int *prediv,
 			int *postdiv, int *mul)
@@ -185,7 +192,7 @@ static int tnetd7300_get_clock(u32 shift, struct tnetd7300_clock *clock,
 		base_clock = AR7_XTAL_CLOCK;
 		break;
 	case BOOT_PLL_SOURCE_CPU:
-		base_clock = ar7_cpu_clock;
+		base_clock = cpu_clk.rate;
 		break;
 	}
 
@@ -212,11 +219,11 @@ static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock,
 	u32 *bootcr, u32 frequency)
 {
 	int prediv, postdiv, mul;
-	int base_clock = ar7_bus_clock;
+	int base_clock = bus_clk.rate;
 
 	switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) {
 	case BOOT_PLL_SOURCE_BUS:
-		base_clock = ar7_bus_clock;
+		base_clock = bus_clk.rate;
 		break;
 	case BOOT_PLL_SOURCE_REF:
 		base_clock = AR7_REF_CLOCK;
@@ -225,7 +232,7 @@ static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock,
 		base_clock = AR7_XTAL_CLOCK;
 		break;
 	case BOOT_PLL_SOURCE_CPU:
-		base_clock = ar7_cpu_clock;
+		base_clock = cpu_clk.rate;
 		break;
 	}
 
@@ -247,18 +254,18 @@ static void __init tnetd7300_init_clocks(void)
 					ioremap_nocache(UR8_REGS_CLOCKS,
 					sizeof(struct tnetd7300_clocks));
 
-	ar7_bus_clock = tnetd7300_get_clock(BUS_PLL_SOURCE_SHIFT,
+	bus_clk.rate = tnetd7300_get_clock(BUS_PLL_SOURCE_SHIFT,
 		&clocks->bus, bootcr, AR7_AFE_CLOCK);
 
 	if (*bootcr & BOOT_PLL_ASYNC_MODE)
-		ar7_cpu_clock = tnetd7300_get_clock(CPU_PLL_SOURCE_SHIFT,
+		cpu_clk.rate = tnetd7300_get_clock(CPU_PLL_SOURCE_SHIFT,
 			&clocks->cpu, bootcr, AR7_AFE_CLOCK);
 	else
-		ar7_cpu_clock = ar7_bus_clock;
+		cpu_clk.rate = bus_clk.rate;
 
-	if (ar7_dsp_clock == 250000000)
+	if (dsp_clk.rate == 250000000)
 		tnetd7300_set_clock(DSP_PLL_SOURCE_SHIFT, &clocks->dsp,
-			bootcr, ar7_dsp_clock);
+			bootcr, dsp_clk.rate);
 
 	iounmap(clocks);
 	iounmap(bootcr);
@@ -343,20 +350,20 @@ static void __init tnetd7200_init_clocks(void)
 		printk(KERN_INFO "Clocks: Setting DSP clock\n");
 		calculate(dsp_base, TNETD7200_DEF_DSP_CLK,
 			&dsp_prediv, &dsp_postdiv, &dsp_mul);
-		ar7_bus_clock =
+		bus_clk.rate =
 			((dsp_base / dsp_prediv) * dsp_mul) / dsp_postdiv;
 		tnetd7200_set_clock(dsp_base, &clocks->dsp,
 			dsp_prediv, dsp_postdiv * 2, dsp_postdiv, dsp_mul * 2,
-			ar7_bus_clock);
+			bus_clk.rate);
 
 		printk(KERN_INFO "Clocks: Setting CPU clock\n");
 		calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv,
 			&cpu_postdiv, &cpu_mul);
-		ar7_cpu_clock =
+		cpu_clk.rate =
 			((cpu_base / cpu_prediv) * cpu_mul) / cpu_postdiv;
 		tnetd7200_set_clock(cpu_base, &clocks->cpu,
 			cpu_prediv, cpu_postdiv, -1, cpu_mul,
-			ar7_cpu_clock);
+			cpu_clk.rate);
 
 	} else
 		if (*bootcr & BOOT_PLL_2TO1_MODE) {
@@ -365,48 +372,90 @@ static void __init tnetd7200_init_clocks(void)
 			printk(KERN_INFO "Clocks: Setting CPU clock\n");
 			calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv,
 				&cpu_postdiv, &cpu_mul);
-			ar7_cpu_clock = ((cpu_base / cpu_prediv) * cpu_mul)
+			cpu_clk.rate = ((cpu_base / cpu_prediv) * cpu_mul)
 								/ cpu_postdiv;
 			tnetd7200_set_clock(cpu_base, &clocks->cpu,
 				cpu_prediv, cpu_postdiv, -1, cpu_mul,
-				ar7_cpu_clock);
+				cpu_clk.rate);
 
 			printk(KERN_INFO "Clocks: Setting DSP clock\n");
 			calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv,
 				&dsp_postdiv, &dsp_mul);
-			ar7_bus_clock = ar7_cpu_clock / 2;
+			bus_clk.rate = cpu_clk.rate / 2;
 			tnetd7200_set_clock(dsp_base, &clocks->dsp,
 				dsp_prediv, dsp_postdiv * 2, dsp_postdiv,
-				dsp_mul * 2, ar7_bus_clock);
+				dsp_mul * 2, bus_clk.rate);
 		} else {
 			printk(KERN_INFO "Clocks: Sync 1:1 mode\n");
 
 			printk(KERN_INFO "Clocks: Setting DSP clock\n");
 			calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv,
 				&dsp_postdiv, &dsp_mul);
-			ar7_bus_clock = ((dsp_base / dsp_prediv) * dsp_mul)
+			bus_clk.rate = ((dsp_base / dsp_prediv) * dsp_mul)
 								/ dsp_postdiv;
 			tnetd7200_set_clock(dsp_base, &clocks->dsp,
 				dsp_prediv, dsp_postdiv * 2, dsp_postdiv,
-				dsp_mul * 2, ar7_bus_clock);
+				dsp_mul * 2, bus_clk.rate);
 
-			ar7_cpu_clock = ar7_bus_clock;
+			cpu_clk.rate = bus_clk.rate;
 		}
 
 	printk(KERN_INFO "Clocks: Setting USB clock\n");
-	usb_base = ar7_bus_clock;
+	usb_base = bus_clk.rate;
 	calculate(usb_base, TNETD7200_DEF_USB_CLK, &usb_prediv,
 		&usb_postdiv, &usb_mul);
 	tnetd7200_set_clock(usb_base, &clocks->usb,
 		usb_prediv, usb_postdiv, -1, usb_mul,
 		TNETD7200_DEF_USB_CLK);
 
-	ar7_dsp_clock = ar7_cpu_clock;
+	dsp_clk.rate = cpu_clk.rate;
 
 	iounmap(clocks);
 	iounmap(bootcr);
 }
 
+/*
+ * Linux clock API
+ */
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	if (!strcmp(id, "bus"))
+		return &bus_clk;
+	/* cpmac and vbus share the same rate */
+	if (!strcmp(id, "cpmac"))
+		return &vbus_clk;
+	if (!strcmp(id, "cpu"))
+		return &cpu_clk;
+	if (!strcmp(id, "dsp"));
+		return &dsp_clk;
+	if (!strcmp(id, "vbus"))
+		return &vbus_clk;
+	return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
+
 int __init ar7_init_clocks(void)
 {
 	switch (ar7_chip_id()) {
@@ -415,12 +464,14 @@ int __init ar7_init_clocks(void)
 		tnetd7200_init_clocks();
 		break;
 	case AR7_CHIP_7300:
-		ar7_dsp_clock = tnetd7300_dsp_clock();
+		dsp_clk.rate = tnetd7300_dsp_clock();
 		tnetd7300_init_clocks();
 		break;
 	default:
 		break;
 	}
+	/* adjust vbus clock rate */
+	vbus_clk.rate = bus_clk.rate / 2;
 
 	return 0;
 }

arch/mips/ar7/gpio.c

@@ -1,6 +1,7 @@
 /*
  * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
  * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org>
+ * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -18,31 +19,113 @@
  */
 
 #include <linux/module.h>
+#include <linux/gpio.h>
 
 #include <asm/mach-ar7/gpio.h>
 
-static const char *ar7_gpio_list[AR7_GPIO_MAX];
+struct ar7_gpio_chip {
+	void __iomem		*regs;
+	struct gpio_chip	chip;
+};
 
-int gpio_request(unsigned gpio, const char *label)
+static int ar7_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
 {
-	if (gpio >= AR7_GPIO_MAX)
-		return -EINVAL;
+	struct ar7_gpio_chip *gpch =
+				container_of(chip, struct ar7_gpio_chip, chip);
+	void __iomem *gpio_in = gpch->regs + AR7_GPIO_INPUT;
 
-	if (ar7_gpio_list[gpio])
-		return -EBUSY;
+	return readl(gpio_in) & (1 << gpio);
+}
+
+static void ar7_gpio_set_value(struct gpio_chip *chip,
+				unsigned gpio, int value)
+{
+	struct ar7_gpio_chip *gpch =
+				container_of(chip, struct ar7_gpio_chip, chip);
+	void __iomem *gpio_out = gpch->regs + AR7_GPIO_OUTPUT;
+	unsigned tmp;
+
+	tmp = readl(gpio_out) & ~(1 << gpio);
+	if (value)
+		tmp |= 1 << gpio;
+	writel(tmp, gpio_out);
+}
+
+static int ar7_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	struct ar7_gpio_chip *gpch =
+				container_of(chip, struct ar7_gpio_chip, chip);
+	void __iomem *gpio_dir = gpch->regs + AR7_GPIO_DIR;
 
-	if (label)
-		ar7_gpio_list[gpio] = label;
-	else
-		ar7_gpio_list[gpio] = "busy";
+	writel(readl(gpio_dir) | (1 << gpio), gpio_dir);
 
 	return 0;
 }
-EXPORT_SYMBOL(gpio_request);
 
-void gpio_free(unsigned gpio)
+static int ar7_gpio_direction_output(struct gpio_chip *chip,
+					unsigned gpio, int value)
 {
-	BUG_ON(!ar7_gpio_list[gpio]);
-	ar7_gpio_list[gpio] = NULL;
+	struct ar7_gpio_chip *gpch =
+				container_of(chip, struct ar7_gpio_chip, chip);
+	void __iomem *gpio_dir = gpch->regs + AR7_GPIO_DIR;
+
+	ar7_gpio_set_value(chip, gpio, value);
+	writel(readl(gpio_dir) & ~(1 << gpio), gpio_dir);
+
+	return 0;
+}
+
+static struct ar7_gpio_chip ar7_gpio_chip = {
+	.chip = {
+		.label			= "ar7-gpio",
+		.direction_input	= ar7_gpio_direction_input,
+		.direction_output	= ar7_gpio_direction_output,
+		.set			= ar7_gpio_set_value,
+		.get			= ar7_gpio_get_value,
+		.base			= 0,
+		.ngpio			= AR7_GPIO_MAX,
+	}
+};
+
+int ar7_gpio_enable(unsigned gpio)
+{
+	void __iomem *gpio_en = ar7_gpio_chip.regs + AR7_GPIO_ENABLE;
+
+	writel(readl(gpio_en) | (1 << gpio), gpio_en);
+
+	return 0;
+}
+EXPORT_SYMBOL(ar7_gpio_enable);
+
+int ar7_gpio_disable(unsigned gpio)
+{
+	void __iomem *gpio_en = ar7_gpio_chip.regs + AR7_GPIO_ENABLE;
+
+	writel(readl(gpio_en) & ~(1 << gpio), gpio_en);
+
+	return 0;
+}
+EXPORT_SYMBOL(ar7_gpio_disable);
+
+static int __init ar7_gpio_init(void)
+{
+	int ret;
+
+	ar7_gpio_chip.regs = ioremap_nocache(AR7_REGS_GPIO,
+					AR7_REGS_GPIO + 0x10);
+
+	if (!ar7_gpio_chip.regs) {
+		printk(KERN_ERR "ar7-gpio: failed to ioremap regs\n");
+		return -ENOMEM;
+	}
+
+	ret = gpiochip_add(&ar7_gpio_chip.chip);
+	if (ret) {
+		printk(KERN_ERR "ar7-gpio: failed to add gpiochip\n");
+		return ret;
+	}
+	printk(KERN_INFO "ar7-gpio: registered %d GPIOs\n",
+				ar7_gpio_chip.chip.ngpio);
+	return ret;
 }
-EXPORT_SYMBOL(gpio_free);
+arch_initcall(ar7_gpio_init);

arch/mips/ar7/memory.c

@@ -62,8 +62,7 @@ void __init prom_meminit(void)
 	unsigned long pages;
 
 	pages = memsize() >> PAGE_SHIFT;
-	add_memory_region(PHYS_OFFSET, pages << PAGE_SHIFT,
-			  BOOT_MEM_RAM);
+	add_memory_region(PHYS_OFFSET, pages << PAGE_SHIFT, BOOT_MEM_RAM);
 }
 
 void __init prom_free_prom_memory(void)

arch/mips/ar7/platform.c

@@ -34,45 +34,50 @@
 #include <linux/etherdevice.h>
 #include <linux/phy.h>
 #include <linux/phy_fixed.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
 
 #include <asm/addrspace.h>
 #include <asm/mach-ar7/ar7.h>
 #include <asm/mach-ar7/gpio.h>
 #include <asm/mach-ar7/prom.h>
 
+/*****************************************************************************
+ * VLYNQ Bus
+ ****************************************************************************/
 struct plat_vlynq_data {
 	struct plat_vlynq_ops ops;
 	int gpio_bit;
 	int reset_bit;
 };
 
-
 static int vlynq_on(struct vlynq_device *dev)
 {
-	int result;
+	int ret;
 	struct plat_vlynq_data *pdata = dev->dev.platform_data;
 
-	result = gpio_request(pdata->gpio_bit, "vlynq");
-	if (result)
+	ret = gpio_request(pdata->gpio_bit, "vlynq");
+	if (ret)
 		goto out;
 
 	ar7_device_reset(pdata->reset_bit);
 
-	result = ar7_gpio_disable(pdata->gpio_bit);
-	if (result)
+	ret = ar7_gpio_disable(pdata->gpio_bit);
+	if (ret)
 		goto out_enabled;
 
-	result = ar7_gpio_enable(pdata->gpio_bit);
-	if (result)
+	ret = ar7_gpio_enable(pdata->gpio_bit);
+	if (ret)
 		goto out_enabled;
 
-	result = gpio_direction_output(pdata->gpio_bit, 0);
-	if (result)
+	ret = gpio_direction_output(pdata->gpio_bit, 0);
+	if (ret)
 		goto out_gpio_enabled;
 
 	msleep(50);
 
 	gpio_set_value(pdata->gpio_bit, 1);
+
 	msleep(50);
 
 	return 0;
@@ -83,320 +88,384 @@ out_enabled:
 	ar7_device_disable(pdata->reset_bit);
 	gpio_free(pdata->gpio_bit);
 out:
-	return result;
+	return ret;
 }
 
 static void vlynq_off(struct vlynq_device *dev)
 {
 	struct plat_vlynq_data *pdata = dev->dev.platform_data;
+
 	ar7_gpio_disable(pdata->gpio_bit);
 	gpio_free(pdata->gpio_bit);
 	ar7_device_disable(pdata->reset_bit);
 }
 
-static struct resource physmap_flash_resource = {
-	.name = "mem",
-	.flags = IORESOURCE_MEM,
-	.start = 0x10000000,
-	.end = 0x107fffff,
-};
-
-static struct resource cpmac_low_res[] = {
+static struct resource vlynq_low_res[] = {
 	{
-		.name = "regs",
-		.flags = IORESOURCE_MEM,
-		.start = AR7_REGS_MAC0,
-		.end = AR7_REGS_MAC0 + 0x7ff,
+		.name	= "regs",
+		.flags	= IORESOURCE_MEM,
+		.start	= AR7_REGS_VLYNQ0,
+		.end	= AR7_REGS_VLYNQ0 + 0xff,
 	},
 	{
-		.name = "irq",
-		.flags = IORESOURCE_IRQ,
-		.start = 27,
-		.end = 27,
+		.name	= "irq",
+		.flags	= IORESOURCE_IRQ,
+		.start	= 29,
+		.end	= 29,
 	},
-};
-
-static struct resource cpmac_high_res[] = {
 	{
-		.name = "regs",
-		.flags = IORESOURCE_MEM,
-		.start = AR7_REGS_MAC1,
-		.end = AR7_REGS_MAC1 + 0x7ff,
+		.name	= "mem",
+		.flags	= IORESOURCE_MEM,
+		.start	= 0x04000000,
+		.end	= 0x04ffffff,
 	},
 	{
-		.name = "irq",
-		.flags = IORESOURCE_IRQ,
-		.start = 41,
-		.end = 41,
+		.name	= "devirq",
+		.flags	= IORESOURCE_IRQ,
+		.start	= 80,
+		.end	= 111,
 	},
 };
 
-static struct resource vlynq_low_res[] = {
+static struct resource vlynq_high_res[] = {
 	{
-		.name = "regs",
-		.flags = IORESOURCE_MEM,
-		.start = AR7_REGS_VLYNQ0,
-		.end = AR7_REGS_VLYNQ0 + 0xff,
+		.name	= "regs",
+		.flags	= IORESOURCE_MEM,
+		.start	= AR7_REGS_VLYNQ1,
+		.end	= AR7_REGS_VLYNQ1 + 0xff,
 	},
 	{
-		.name = "irq",
-		.flags = IORESOURCE_IRQ,
-		.start = 29,
-		.end = 29,
+		.name	= "irq",
+		.flags	= IORESOURCE_IRQ,
+		.start	= 33,
+		.end	= 33,
 	},
 	{
-		.name = "mem",
-		.flags = IORESOURCE_MEM,
-		.start = 0x04000000,
-		.end = 0x04ffffff,
+		.name	= "mem",
+		.flags	= IORESOURCE_MEM,
+		.start	= 0x0c000000,
+		.end	= 0x0cffffff,
 	},
 	{
-		.name = "devirq",
-		.flags = IORESOURCE_IRQ,
-		.start = 80,
-		.end = 111,
+		.name	= "devirq",
+		.flags	= IORESOURCE_IRQ,
+		.start	= 112,
+		.end	= 143,
 	},
 };
 
-static struct resource vlynq_high_res[] = {
-	{
-		.name = "regs",
-		.flags = IORESOURCE_MEM,
-		.start = AR7_REGS_VLYNQ1,
-		.end = AR7_REGS_VLYNQ1 + 0xff,
+static struct plat_vlynq_data vlynq_low_data = {
+	.ops = {
+		.on	= vlynq_on,
+		.off	= vlynq_off,
 	},
-	{
-		.name = "irq",
-		.flags = IORESOURCE_IRQ,
-		.start = 33,
-		.end = 33,
+	.reset_bit	= 20,
+	.gpio_bit	= 18,
+};
+
+static struct plat_vlynq_data vlynq_high_data = {
+	.ops = {
+		.on	= vlynq_on,
+		.off	= vlynq_off,
 	},
-	{
-		.name = "mem",
-		.flags = IORESOURCE_MEM,
-		.start = 0x0c000000,
-		.end = 0x0cffffff,
+	.reset_bit	= 26,
+	.gpio_bit	= 19,
+};
+
+static struct platform_device vlynq_low = {
+	.id		= 0,
+	.name		= "vlynq",
+	.dev = {
+		.platform_data	= &vlynq_low_data,
 	},
-	{
-		.name = "devirq",
-		.flags = IORESOURCE_IRQ,
-		.start = 112,
-		.end = 143,
+	.resource	= vlynq_low_res,
+	.num_resources	= ARRAY_SIZE(vlynq_low_res),
+};
+
+static struct platform_device vlynq_high = {
+	.id		= 1,
+	.name		= "vlynq",
+	.dev = {
+		.platform_data	= &vlynq_high_data,
 	},
+	.resource	= vlynq_high_res,
+	.num_resources	= ARRAY_SIZE(vlynq_high_res),
 };
 
-static struct resource usb_res[] = {
-	{
-		.name = "regs",
-		.flags = IORESOURCE_MEM,
-		.start = AR7_REGS_USB,
-		.end = AR7_REGS_USB + 0xff,
+/*****************************************************************************
+ * Flash
+ ****************************************************************************/
+static struct resource physmap_flash_resource = {
+	.name	= "mem",
+	.flags	= IORESOURCE_MEM,
+	.start	= 0x10000000,
+	.end	= 0x107fffff,
+};
+
+static struct physmap_flash_data physmap_flash_data = {
+	.width	= 2,
+};
+
+static struct platform_device physmap_flash = {
+	.name		= "physmap-flash",
+	.dev = {
+		.platform_data	= &physmap_flash_data,
 	},
+	.resource	= &physmap_flash_resource,
+	.num_resources	= 1,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+static struct resource cpmac_low_res[] = {
 	{
-		.name = "irq",
-		.flags = IORESOURCE_IRQ,
-		.start = 32,
-		.end = 32,
+		.name	= "regs",
+		.flags	= IORESOURCE_MEM,
+		.start	= AR7_REGS_MAC0,
+		.end	= AR7_REGS_MAC0 + 0x7ff,
 	},
 	{
-		.name = "mem",
-		.flags = IORESOURCE_MEM,
-		.start = 0x03400000,
-		.end = 0x03401fff,
+		.name	= "irq",
+		.flags	= IORESOURCE_IRQ,
+		.start	= 27,
+		.end 	= 27,
 	},
 };
 
-static struct physmap_flash_data physmap_flash_data = {
-	.width = 2,
+static struct resource cpmac_high_res[] = {
+	{
+		.name	= "regs",
+		.flags	= IORESOURCE_MEM,
+		.start	= AR7_REGS_MAC1,
+		.end	= AR7_REGS_MAC1 + 0x7ff,
+	},
+	{
+		.name	= "irq",
+		.flags	= IORESOURCE_IRQ,
+		.start	= 41,
+		.end	= 41,
+	},
 };
 
 static struct fixed_phy_status fixed_phy_status __initdata = {
-	.link = 1,
-	.speed = 100,
-	.duplex = 1,
+	.link		= 1,
+	.speed		= 100,
+	.duplex		= 1,
 };
 
 static struct plat_cpmac_data cpmac_low_data = {
-	.reset_bit = 17,
-	.power_bit = 20,
-	.phy_mask = 0x80000000,
+	.reset_bit	= 17,
+	.power_bit	= 20,
+	.phy_mask	= 0x80000000,
 };
 
 static struct plat_cpmac_data cpmac_high_data = {
-	.reset_bit = 21,
-	.power_bit = 22,
-	.phy_mask = 0x7fffffff,
-};
-
-static struct plat_vlynq_data vlynq_low_data = {
-	.ops.on = vlynq_on,
-	.ops.off = vlynq_off,
-	.reset_bit = 20,
-	.gpio_bit = 18,
-};
-
-static struct plat_vlynq_data vlynq_high_data = {
-	.ops.on = vlynq_on,
-	.ops.off = vlynq_off,
-	.reset_bit = 16,
-	.gpio_bit = 19,
-};
-
-static struct platform_device physmap_flash = {
-	.id = 0,
-	.name = "physmap-flash",
-	.dev.platform_data = &physmap_flash_data,
-	.resource = &physmap_flash_resource,
-	.num_resources = 1,
+	.reset_bit	= 21,
+	.power_bit	= 22,
+	.phy_mask	= 0x7fffffff,
 };
 
 static u64 cpmac_dma_mask = DMA_BIT_MASK(32);
+
 static struct platform_device cpmac_low = {
-	.id = 0,
-	.name = "cpmac",
+	.id		= 0,
+	.name		= "cpmac",
 	.dev = {
-		.dma_mask = &cpmac_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &cpmac_low_data,
+		.dma_mask		= &cpmac_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &cpmac_low_data,
 	},
-	.resource = cpmac_low_res,
-	.num_resources = ARRAY_SIZE(cpmac_low_res),
+	.resource	= cpmac_low_res,
+	.num_resources	= ARRAY_SIZE(cpmac_low_res),
 };
 
 static struct platform_device cpmac_high = {
-	.id = 1,
-	.name = "cpmac",
+	.id		= 1,
+	.name		= "cpmac",
 	.dev = {
-		.dma_mask = &cpmac_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &cpmac_high_data,
+		.dma_mask		= &cpmac_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &cpmac_high_data,
 	},
-	.resource = cpmac_high_res,
-	.num_resources = ARRAY_SIZE(cpmac_high_res),
+	.resource	= cpmac_high_res,
+	.num_resources	= ARRAY_SIZE(cpmac_high_res),
 };
 
-static struct platform_device vlynq_low = {
-	.id = 0,
-	.name = "vlynq",
-	.dev.platform_data = &vlynq_low_data,
-	.resource = vlynq_low_res,
-	.num_resources = ARRAY_SIZE(vlynq_low_res),
-};
+static inline unsigned char char2hex(char h)
+{
+	switch (h) {
+	case '0': case '1': case '2': case '3': case '4':
+	case '5': case '6': case '7': case '8': case '9':
+		return h - '0';
+	case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
+		return h - 'A' + 10;
+	case 'a': case 'b': case 'c': case 'd': case 'e': case 'f':
+		return h - 'a' + 10;
+	default:
+		return 0;
+	}
+}
 
-static struct platform_device vlynq_high = {
-	.id = 1,
-	.name = "vlynq",
-	.dev.platform_data = &vlynq_high_data,
-	.resource = vlynq_high_res,
-	.num_resources = ARRAY_SIZE(vlynq_high_res),
+static void cpmac_get_mac(int instance, unsigned char *dev_addr)
+{
+	int i;
+	char name[5], default_mac[ETH_ALEN], *mac;
+
+	mac = NULL;
+	sprintf(name, "mac%c", 'a' + instance);
+	mac = prom_getenv(name);
+	if (!mac) {
+		sprintf(name, "mac%c", 'a');
+		mac = prom_getenv(name);
+	}
+	if (!mac) {
+		random_ether_addr(default_mac);
+		mac = default_mac;
+	}
+	for (i = 0; i < 6; i++)
+		dev_addr[i] = (char2hex(mac[i * 3]) << 4) +
+			char2hex(mac[i * 3 + 1]);
+}
+
+/*****************************************************************************
+ * USB
+ ****************************************************************************/
+static struct resource usb_res[] = {
+	{
+		.name	= "regs",
+		.flags	= IORESOURCE_MEM,
+		.start	= AR7_REGS_USB,
+		.end	= AR7_REGS_USB + 0xff,
+	},
+	{
+		.name	= "irq",
+		.flags	= IORESOURCE_IRQ,
+		.start	= 32,
+		.end	= 32,
+	},
+	{
+		.name	= "mem",
+		.flags	= IORESOURCE_MEM,
+		.start	= 0x03400000,
+		.end	= 0x03401fff,
+	},
 };
 
+static struct platform_device ar7_udc = {
+	.name		= "ar7_udc",
+	.resource	= usb_res,
+	.num_resources	= ARRAY_SIZE(usb_res),
+};
 
+/*****************************************************************************
+ * LEDs
+ ****************************************************************************/
 static struct gpio_led default_leds[] = {
 	{
-		.name = "status",
-		.gpio = 8,
-		.active_low = 1,
+		.name			= "status",
+		.gpio			= 8,
+		.active_low		= 1,
 	},
 };
 
 static struct gpio_led dsl502t_leds[] = {
 	{
-		.name = "status",
-		.gpio = 9,
-		.active_low = 1,
+		.name			= "status",
+		.gpio			= 9,
+		.active_low		= 1,
 	},
 	{
-		.name = "ethernet",
-		.gpio = 7,
-		.active_low = 1,
+		.name			= "ethernet",
+		.gpio			= 7,
+		.active_low		= 1,
 	},
 	{
-		.name = "usb",
-		.gpio = 12,
-		.active_low = 1,
+		.name			= "usb",
+		.gpio			= 12,
+		.active_low		= 1,
 	},
 };
 
 static struct gpio_led dg834g_leds[] = {
 	{
-		.name = "ppp",
-		.gpio = 6,
-		.active_low = 1,
+		.name			= "ppp",
+		.gpio			= 6,
+		.active_low		= 1,
 	},
 	{
-		.name = "status",
-		.gpio = 7,
-		.active_low = 1,
+		.name			= "status",
+		.gpio			= 7,
+		.active_low		= 1,
 	},
 	{
-		.name = "adsl",
-		.gpio = 8,
-		.active_low = 1,
+		.name			= "adsl",
+		.gpio			= 8,
+		.active_low		= 1,
 	},
 	{
-		.name = "wifi",
-		.gpio = 12,
-		.active_low = 1,
+		.name			= "wifi",
+		.gpio			= 12,
+		.active_low		= 1,
 	},
 	{
-		.name = "power",
-		.gpio = 14,
-		.active_low = 1,
-		.default_trigger = "default-on",
+		.name			= "power",
+		.gpio			= 14,
+		.active_low		= 1,
+		.default_trigger	= "default-on",
 	},
 };
 
 static struct gpio_led fb_sl_leds[] = {
 	{
-		.name = "1",
-		.gpio = 7,
+		.name			= "1",
+		.gpio			= 7,
 	},
 	{
-		.name = "2",
-		.gpio = 13,
-		.active_low = 1,
+		.name			= "2",
+		.gpio			= 13,
+		.active_low		= 1,
 	},
 	{
-		.name = "3",
-		.gpio = 10,
-		.active_low = 1,
+		.name			= "3",
+		.gpio			= 10,
+		.active_low		= 1,
 	},
 	{
-		.name = "4",
-		.gpio = 12,
-		.active_low = 1,
+		.name			= "4",
+		.gpio			= 12,
+		.active_low		= 1,
 	},
 	{
-		.name = "5",
-		.gpio = 9,
-		.active_low = 1,
+		.name			= "5",
+		.gpio			= 9,
+		.active_low		= 1,
 	},
 };
 
 static struct gpio_led fb_fon_leds[] = {
 	{
-		.name = "1",
-		.gpio = 8,
+		.name			= "1",
+		.gpio			= 8,
 	},
 	{
-		.name = "2",
-		.gpio = 3,
-		.active_low = 1,
+		.name			= "2",
+		.gpio			= 3,
+		.active_low		= 1,
 	},
 	{
-		.name = "3",
-		.gpio = 5,
+		.name			= "3",
+		.gpio			= 5,
 	},
 	{
-		.name = "4",
-		.gpio = 4,
-		.active_low = 1,
+		.name			= "4",
+		.gpio			= 4,
+		.active_low		= 1,
 	},
 	{
-		.name = "5",
-		.gpio = 11,
-		.active_low = 1,
+		.name			= "5",
+		.gpio			= 11,
+		.active_low		= 1,
 	},
 };
 
@@ -404,69 +473,11 @@ static struct gpio_led_platform_data ar7_led_data;
 
 static struct platform_device ar7_gpio_leds = {
 	.name = "leds-gpio",
-	.id = -1,
 	.dev = {
 		.platform_data = &ar7_led_data,
 	}
 };
 
-static struct platform_device ar7_udc = {
-	.id = -1,
-	.name = "ar7_udc",
-	.resource = usb_res,
-	.num_resources = ARRAY_SIZE(usb_res),
-};
-
-static struct resource ar7_wdt_res = {
-	.name = "regs",
-	.start = -1, /* Filled at runtime */
-	.end = -1, /* Filled at runtime */
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device ar7_wdt = {
-	.id = -1,
-	.name  = "ar7_wdt",
-	.resource = &ar7_wdt_res,
-	.num_resources = 1,
-};
-
-static inline unsigned char char2hex(char h)
-{
-	switch (h) {
-	case '0': case '1': case '2': case '3': case '4':
-	case '5': case '6': case '7': case '8': case '9':
-		return h - '0';
-	case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
-		return h - 'A' + 10;
-	case 'a': case 'b': case 'c': case 'd': case 'e': case 'f':
-		return h - 'a' + 10;
-	default:
-		return 0;
-	}
-}
-
-static void cpmac_get_mac(int instance, unsigned char *dev_addr)
-{
-	int i;
-	char name[5], default_mac[ETH_ALEN], *mac;
-
-	mac = NULL;
-	sprintf(name, "mac%c", 'a' + instance);
-	mac = prom_getenv(name);
-	if (!mac) {
-		sprintf(name, "mac%c", 'a');
-		mac = prom_getenv(name);
-	}
-	if (!mac) {
-		random_ether_addr(default_mac);
-		mac = default_mac;
-	}
-	for (i = 0; i < 6; i++)
-		dev_addr[i] = (char2hex(mac[i * 3]) << 4) +
-			char2hex(mac[i * 3 + 1]);
-}
-
 static void __init detect_leds(void)
 {
 	char *prid, *usb_prod;
@@ -499,111 +510,149 @@ static void __init detect_leds(void)
 	}
 }
 
-static int __init ar7_register_devices(void)
+/*****************************************************************************
+ * Watchdog
+ ****************************************************************************/
+static struct resource ar7_wdt_res = {
+	.name		= "regs",
+	.flags		= IORESOURCE_MEM,
+	.start		= -1,	/* Filled at runtime */
+	.end		= -1,	/* Filled at runtime */
+};
+
+static struct platform_device ar7_wdt = {
+	.name		= "ar7_wdt",
+	.resource	= &ar7_wdt_res,
+	.num_resources	= 1,
+};
+
+/*****************************************************************************
+ * Init
+ ****************************************************************************/
+static int __init ar7_register_uarts(void)
 {
-	u16 chip_id;
-	int res;
-	u32 *bootcr, val;
 #ifdef CONFIG_SERIAL_8250
-	static struct uart_port uart_port[2] __initdata;
-
-	memset(uart_port, 0, sizeof(struct uart_port) * 2);
-
-	uart_port[0].type = PORT_16550A;
-	uart_port[0].line = 0;
-	uart_port[0].irq = AR7_IRQ_UART0;
-	uart_port[0].uartclk = ar7_bus_freq() / 2;
-	uart_port[0].iotype = UPIO_MEM32;
-	uart_port[0].mapbase = AR7_REGS_UART0;
-	uart_port[0].membase = ioremap(uart_port[0].mapbase, 256);
-	uart_port[0].regshift = 2;
-	res = early_serial_setup(&uart_port[0]);
+	static struct uart_port uart_port __initdata;
+	struct clk *bus_clk;
+	int res;
+
+	memset(&uart_port, 0, sizeof(struct uart_port));
+
+	bus_clk = clk_get(NULL, "bus");
+	if (IS_ERR(bus_clk))
+		panic("unable to get bus clk\n");
+
+	uart_port.type		= PORT_16550A;
+	uart_port.uartclk	= clk_get_rate(bus_clk) / 2;
+	uart_port.iotype	= UPIO_MEM32;
+	uart_port.regshift	= 2;
+
+	uart_port.line		= 0;
+	uart_port.irq		= AR7_IRQ_UART0;
+	uart_port.mapbase	= AR7_REGS_UART0;
+	uart_port.membase	= ioremap(uart_port.mapbase, 256);
+
+	res = early_serial_setup(&uart_port);
 	if (res)
 		return res;
 
-
 	/* Only TNETD73xx have a second serial port */
 	if (ar7_has_second_uart()) {
-		uart_port[1].type = PORT_16550A;
-		uart_port[1].line = 1;
-		uart_port[1].irq = AR7_IRQ_UART1;
-		uart_port[1].uartclk = ar7_bus_freq() / 2;
-		uart_port[1].iotype = UPIO_MEM32;
-		uart_port[1].mapbase = UR8_REGS_UART1;
-		uart_port[1].membase = ioremap(uart_port[1].mapbase, 256);
-		uart_port[1].regshift = 2;
-		res = early_serial_setup(&uart_port[1]);
+		uart_port.line		= 1;
+		uart_port.irq		= AR7_IRQ_UART1;
+		uart_port.mapbase	= UR8_REGS_UART1;
+		uart_port.membase	= ioremap(uart_port.mapbase, 256);
+
+		res = early_serial_setup(&uart_port);
 		if (res)
 			return res;
 	}
-#endif /* CONFIG_SERIAL_8250 */
+#endif
+
+	return 0;
+}
+
+static int __init ar7_register_devices(void)
+{
+	void __iomem *bootcr;
+	u32 val;
+	u16 chip_id;
+	int res;
+
+	res = ar7_register_uarts();
+	if (res)
+		pr_err("unable to setup uart(s): %d\n", res);
+
 	res = platform_device_register(&physmap_flash);
 	if (res)
-		return res;
+		pr_warning("unable to register physmap-flash: %d\n", res);
 
 	ar7_device_disable(vlynq_low_data.reset_bit);
 	res = platform_device_register(&vlynq_low);
 	if (res)
-		return res;
+		pr_warning("unable to register vlynq-low: %d\n", res);
 
 	if (ar7_has_high_vlynq()) {
 		ar7_device_disable(vlynq_high_data.reset_bit);
 		res = platform_device_register(&vlynq_high);
 		if (res)
-			return res;
+			pr_warning("unable to register vlynq-high: %d\n", res);
 	}
 
 	if (ar7_has_high_cpmac()) {
-		res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status);
-		if (res && res != -ENODEV)
-			return res;
-		cpmac_get_mac(1, cpmac_high_data.dev_addr);
-		res = platform_device_register(&cpmac_high);
-		if (res)
-			return res;
-	} else {
+		if (!res) {
+			cpmac_get_mac(1, cpmac_high_data.dev_addr);
+
+			res = platform_device_register(&cpmac_high);
+			if (res)
+				pr_warning("unable to register cpmac-high: %d\n", res);
+		} else
+			pr_warning("unable to add cpmac-high phy: %d\n", res);
+	} else
 		cpmac_low_data.phy_mask = 0xffffffff;
-	}
 
 	res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status);
-	if (res && res != -ENODEV)
-		return res;
-
-	cpmac_get_mac(0, cpmac_low_data.dev_addr);
-	res = platform_device_register(&cpmac_low);
-	if (res)
-		return res;
+	if (!res) {
+		cpmac_get_mac(0, cpmac_low_data.dev_addr);
+		res = platform_device_register(&cpmac_low);
+		if (res)
+			pr_warning("unable to register cpmac-low: %d\n", res);
+	} else
+		pr_warning("unable to add cpmac-low phy: %d\n", res);
 
 	detect_leds();
 	res = platform_device_register(&ar7_gpio_leds);
 	if (res)
-		return res;
+		pr_warning("unable to register leds: %d\n", res);
 
 	res = platform_device_register(&ar7_udc);
-
-	chip_id = ar7_chip_id();
-	switch (chip_id) {
-	case AR7_CHIP_7100:
-	case AR7_CHIP_7200:
-		ar7_wdt_res.start = AR7_REGS_WDT;
-		break;
-	case AR7_CHIP_7300:
-		ar7_wdt_res.start = UR8_REGS_WDT;
-		break;
-	default:
-		break;
-	}
-
-	ar7_wdt_res.end = ar7_wdt_res.start + 0x20;
-
-	bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4);
-	val = *bootcr;
-	iounmap(bootcr);
+	if (res)
+		pr_warning("unable to register usb slave: %d\n", res);
 
 	/* Register watchdog only if enabled in hardware */
-	if (val & AR7_WDT_HW_ENA)
+	bootcr = ioremap_nocache(AR7_REGS_DCL, 4);
+	val = readl(bootcr);
+	iounmap(bootcr);
+	if (val & AR7_WDT_HW_ENA) {
+		chip_id = ar7_chip_id();
+		switch (chip_id) {
+		case AR7_CHIP_7100:
+		case AR7_CHIP_7200:
+			ar7_wdt_res.start = AR7_REGS_WDT;
+			break;
+		case AR7_CHIP_7300:
+			ar7_wdt_res.start = UR8_REGS_WDT;
+			break;
+		default:
+			break;
+		}
+
+		ar7_wdt_res.end = ar7_wdt_res.start + 0x20;
 		res = platform_device_register(&ar7_wdt);
+		if (res)
+			pr_warning("unable to register watchdog: %d\n", res);
+	}
 
-	return res;
+	return 0;
 }
 arch_initcall(ar7_register_devices);

arch/mips/ar7/prom.c

@@ -32,8 +32,8 @@
 #define MAX_ENTRY 80
 
 struct env_var {
-	char *name;
-	char *value;
+	char	*name;
+	char	*value;
 };
 
 static struct env_var adam2_env[MAX_ENTRY];
@@ -41,6 +41,7 @@ static struct env_var adam2_env[MAX_ENTRY];
 char *prom_getenv(const char *name)
 {
 	int i;
+
 	for (i = 0; (i < MAX_ENTRY) && adam2_env[i].name; i++)
 		if (!strcmp(name, adam2_env[i].name))
 			return adam2_env[i].value;
@@ -49,65 +50,50 @@ char *prom_getenv(const char *name)
 }
 EXPORT_SYMBOL(prom_getenv);
 
-char * __init prom_getcmdline(void)
-{
-	return &(arcs_cmdline[0]);
-}
-
 static void  __init ar7_init_cmdline(int argc, char *argv[])
 {
-	char *cp;
-	int actr;
-
-	actr = 1; /* Always ignore argv[0] */
+	int i;
 
-	cp = &(arcs_cmdline[0]);
-	while (actr < argc) {
-		strcpy(cp, argv[actr]);
-		cp += strlen(argv[actr]);
-		*cp++ = ' ';
-		actr++;
-	}
-	if (cp != &(arcs_cmdline[0])) {
-		/* get rid of trailing space */
-		--cp;
-		*cp = '\0';
+	for (i = 1; i < argc; i++) {
+		strlcat(arcs_cmdline, argv[i], COMMAND_LINE_SIZE);
+		if (i < (argc - 1))
+			strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
 	}
 }
 
 struct psbl_rec {
-	u32 psbl_size;
-	u32 env_base;
-	u32 env_size;
-	u32 ffs_base;
-	u32 ffs_size;
+	u32	psbl_size;
+	u32	env_base;
+	u32	env_size;
+	u32	ffs_base;
+	u32	ffs_size;
 };
 
 static __initdata char psp_env_version[] = "TIENV0.8";
 
 struct psp_env_chunk {
-	u8 num;
-	u8 ctrl;
-	u16 csum;
-	u8 len;
-	char data[11];
+	u8	num;
+	u8	ctrl;
+	u16	csum;
+	u8	len;
+	char	data[11];
 } __attribute__ ((packed));
 
 struct psp_var_map_entry {
-	u8 num;
-	char *value;
+	u8	num;
+	char	*value;
 };
 
 static struct psp_var_map_entry psp_var_map[] = {
-	{ 1, "cpufrequency" },
-	{ 2, "memsize" },
-	{ 3, "flashsize" },
-	{ 4, "modetty0" },
-	{ 5, "modetty1" },
-	{ 8, "maca" },
-	{ 9, "macb" },
-	{ 28, "sysfrequency" },
-	{ 38, "mipsfrequency" },
+	{  1,	"cpufrequency" },
+	{  2,	"memsize" },
+	{  3,	"flashsize" },
+	{  4,	"modetty0" },
+	{  5,	"modetty1" },
+	{  8,	"maca" },
+	{  9,	"macb" },
+	{ 28,	"sysfrequency" },
+	{ 38,	"mipsfrequency" },
 };
 
 /*
@@ -154,6 +140,7 @@ static char * __init lookup_psp_var_map(u8 num)
 static void __init add_adam2_var(char *name, char *value)
 {
 	int i;
+
 	for (i = 0; i < MAX_ENTRY; i++) {
 		if (!adam2_env[i].name) {
 			adam2_env[i].name = name;
@@ -216,7 +203,7 @@ static void __init console_config(void)
 	char parity = '\0', bits = '\0', flow = '\0';
 	char *s, *p;
 
-	if (strstr(prom_getcmdline(), "console="))
+	if (strstr(arcs_cmdline, "console="))
 		return;
 
 	s = prom_getenv("modetty0");
@@ -250,7 +237,7 @@ static void __init console_config(void)
 	else
 		sprintf(console_string, " console=ttyS0,%d%c%c", baud, parity,
 			bits);
-	strcat(prom_getcmdline(), console_string);
+	strlcat(arcs_cmdline, console_string, COMMAND_LINE_SIZE);
 #endif
 }
 
@@ -279,4 +266,3 @@ int prom_putchar(char c)
 	serial_out(UART_TX, c);
 	return 1;
 }
-

arch/mips/ar7/setup.c

@@ -26,8 +26,8 @@
 
 static void ar7_machine_restart(char *command)
 {
-	u32 *softres_reg = ioremap(AR7_REGS_RESET +
-					  AR7_RESET_SOFTWARE, 1);
+	u32 *softres_reg = ioremap(AR7_REGS_RESET + AR7_RESET_SOFTWARE, 1);
+
 	writel(1, softres_reg);
 }
 
@@ -41,6 +41,7 @@ static void ar7_machine_power_off(void)
 {
 	u32 *power_reg = (u32 *)ioremap(AR7_REGS_POWER, 1);
 	u32 power_state = readl(power_reg) | (3 << 30);
+
 	writel(power_state, power_reg);
 	ar7_machine_halt();
 }
@@ -49,14 +50,14 @@ const char *get_system_type(void)
 {
 	u16 chip_id = ar7_chip_id();
 	switch (chip_id) {
-	case AR7_CHIP_7300:
-		return "TI AR7 (TNETD7300)";
 	case AR7_CHIP_7100:
 		return "TI AR7 (TNETD7100)";
 	case AR7_CHIP_7200:
 		return "TI AR7 (TNETD7200)";
+	case AR7_CHIP_7300:
+		return "TI AR7 (TNETD7300)";
 	default:
-		return "TI AR7 (Unknown)";
+		return "TI AR7 (unknown)";
 	}
 }
 
@@ -70,7 +71,6 @@ console_initcall(ar7_init_console);
  * Initializes basic routines and structures pointers, memory size (as
  * given by the bios and saves the command line.
  */
-
 void __init plat_mem_setup(void)
 {
 	unsigned long io_base;
@@ -88,6 +88,5 @@ void __init plat_mem_setup(void)
 	prom_meminit();
 
 	printk(KERN_INFO "%s, ID: 0x%04x, Revision: 0x%02x\n",
-					get_system_type(),
-		ar7_chip_id(), ar7_chip_rev());
+			get_system_type(), ar7_chip_id(), ar7_chip_rev());
 }

arch/mips/ar7/time.c

@@ -20,11 +20,21 @@
 
 #include <linux/init.h>
 #include <linux/time.h>
+#include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/time.h>
 #include <asm/mach-ar7/ar7.h>
 
 void __init plat_time_init(void)
 {
-	mips_hpt_frequency = ar7_cpu_freq() / 2;
+	struct clk *cpu_clk;
+
+	cpu_clk = clk_get(NULL, "cpu");
+	if (IS_ERR(cpu_clk)) {
+		printk(KERN_ERR "unable to get cpu clock\n");
+		return;
+	}
+
+	mips_hpt_frequency = clk_get_rate(cpu_clk) / 2;
 }

arch/mips/bcm47xx/gpio.c

@@ -59,4 +59,3 @@ int gpio_to_irq(unsigned gpio)
 		return -EINVAL;
 }
 EXPORT_SYMBOL_GPL(gpio_to_irq);
-

arch/mips/bcm47xx/prom.c

@@ -163,4 +163,3 @@ void __init prom_init(void)
 void __init prom_free_prom_memory(void)
 {
 }
-

arch/mips/bcm47xx/setup.c

@@ -121,4 +121,3 @@ void __init plat_mem_setup(void)
 	_machine_halt = bcm47xx_machine_halt;
 	pm_power_off = bcm47xx_machine_halt;
 }
-

arch/mips/bcm47xx/wgt634u.c

@@ -164,4 +164,3 @@ static int __init wgt634u_init(void)
 }
 
 module_init(wgt634u_init);
-

arch/mips/bcm63xx/boards/board_bcm963xx.c

@@ -836,4 +836,3 @@ int __init board_register_devices(void)
 
 	return 0;
 }
-

arch/mips/bcm63xx/timer.c

@@ -17,8 +17,8 @@
 #include <bcm63xx_timer.h>
 #include <bcm63xx_regs.h>
 
-static DEFINE_SPINLOCK(timer_reg_lock);
-static DEFINE_SPINLOCK(timer_data_lock);
+static DEFINE_RAW_SPINLOCK(timer_reg_lock);
+static DEFINE_RAW_SPINLOCK(timer_data_lock);
 static struct clk *periph_clk;
 
 static struct timer_data {
@@ -31,23 +31,23 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 	u32 stat;
 	int i;
 
-	spin_lock(&timer_reg_lock);
+	raw_spin_lock(&timer_reg_lock);
 	stat = bcm_timer_readl(TIMER_IRQSTAT_REG);
 	bcm_timer_writel(stat, TIMER_IRQSTAT_REG);
-	spin_unlock(&timer_reg_lock);
+	raw_spin_unlock(&timer_reg_lock);
 
 	for (i = 0; i < BCM63XX_TIMER_COUNT; i++) {
 		if (!(stat & TIMER_IRQSTAT_TIMER_CAUSE(i)))
 			continue;
 
-		spin_lock(&timer_data_lock);
+		raw_spin_lock(&timer_data_lock);
 		if (!timer_data[i].cb) {
-			spin_unlock(&timer_data_lock);
+			raw_spin_unlock(&timer_data_lock);
 			continue;
 		}
 
 		timer_data[i].cb(timer_data[i].data);
-		spin_unlock(&timer_data_lock);
+		raw_spin_unlock(&timer_data_lock);
 	}
 
 	return IRQ_HANDLED;
@@ -61,7 +61,7 @@ int bcm63xx_timer_enable(int id)
 	if (id >= BCM63XX_TIMER_COUNT)
 		return -EINVAL;
 
-	spin_lock_irqsave(&timer_reg_lock, flags);
+	raw_spin_lock_irqsave(&timer_reg_lock, flags);
 
 	reg = bcm_timer_readl(TIMER_CTLx_REG(id));
 	reg |= TIMER_CTL_ENABLE_MASK;
@@ -71,7 +71,7 @@ int bcm63xx_timer_enable(int id)
 	reg |= TIMER_IRQSTAT_TIMER_IR_EN(id);
 	bcm_timer_writel(reg, TIMER_IRQSTAT_REG);
 
-	spin_unlock_irqrestore(&timer_reg_lock, flags);
+	raw_spin_unlock_irqrestore(&timer_reg_lock, flags);
 	return 0;
 }
 
@@ -85,7 +85,7 @@ int bcm63xx_timer_disable(int id)
 	if (id >= BCM63XX_TIMER_COUNT)
 		return -EINVAL;
 
-	spin_lock_irqsave(&timer_reg_lock, flags);
+	raw_spin_lock_irqsave(&timer_reg_lock, flags);
 
 	reg = bcm_timer_readl(TIMER_CTLx_REG(id));
 	reg &= ~TIMER_CTL_ENABLE_MASK;
@@ -95,7 +95,7 @@ int bcm63xx_timer_disable(int id)
 	reg &= ~TIMER_IRQSTAT_TIMER_IR_EN(id);
 	bcm_timer_writel(reg, TIMER_IRQSTAT_REG);
 
-	spin_unlock_irqrestore(&timer_reg_lock, flags);
+	raw_spin_unlock_irqrestore(&timer_reg_lock, flags);
 	return 0;
 }
 
@@ -110,7 +110,7 @@ int bcm63xx_timer_register(int id, void (*callback)(void *data), void *data)
 		return -EINVAL;
 
 	ret = 0;
-	spin_lock_irqsave(&timer_data_lock, flags);
+	raw_spin_lock_irqsave(&timer_data_lock, flags);
 	if (timer_data[id].cb) {
 		ret = -EBUSY;
 		goto out;
@@ -120,7 +120,7 @@ int bcm63xx_timer_register(int id, void (*callback)(void *data), void *data)
 	timer_data[id].data = data;
 
 out:
-	spin_unlock_irqrestore(&timer_data_lock, flags);
+	raw_spin_unlock_irqrestore(&timer_data_lock, flags);
 	return ret;
 }
 
@@ -133,9 +133,9 @@ void bcm63xx_timer_unregister(int id)
 	if (id >= BCM63XX_TIMER_COUNT)
 		return;
 
-	spin_lock_irqsave(&timer_data_lock, flags);
+	raw_spin_lock_irqsave(&timer_data_lock, flags);
 	timer_data[id].cb = NULL;
-	spin_unlock_irqrestore(&timer_data_lock, flags);
+	raw_spin_unlock_irqrestore(&timer_data_lock, flags);
 }
 
 EXPORT_SYMBOL(bcm63xx_timer_unregister);
@@ -159,7 +159,7 @@ int bcm63xx_timer_set(int id, int monotonic, unsigned int countdown_us)
 	if (countdown & ~TIMER_CTL_COUNTDOWN_MASK)
 		return -EINVAL;
 
-	spin_lock_irqsave(&timer_reg_lock, flags);
+	raw_spin_lock_irqsave(&timer_reg_lock, flags);
 	reg = bcm_timer_readl(TIMER_CTLx_REG(id));
 
 	if (monotonic)
@@ -171,7 +171,7 @@ int bcm63xx_timer_set(int id, int monotonic, unsigned int countdown_us)
 	reg |= countdown;
 	bcm_timer_writel(reg, TIMER_CTLx_REG(id));
 
-	spin_unlock_irqrestore(&timer_reg_lock, flags);
+	raw_spin_unlock_irqrestore(&timer_reg_lock, flags);
 	return 0;
 }
 

arch/mips/boot/compressed/Makefile

@@ -9,7 +9,7 @@
 # modified by Cort (cort@cs.nmt.edu)
 #
 # Copyright (C) 2009 Lemote Inc. & DSLab, Lanzhou University
-# Author: Wu Zhangjin <wuzj@lemote.com>
+# Author: Wu Zhangjin <wuzhangjin@gmail.com>
 #
 
 # compressed kernel load addr: VMLINUZ_LOAD_ADDRESS > VMLINUX_LOAD_ADDRESS + VMLINUX_SIZE
@@ -27,15 +27,18 @@ BOOT_HEAP_SIZE := 0x400000
 KBUILD_CFLAGS := $(shell echo $(KBUILD_CFLAGS) | sed -e "s/-pg//")
 
 KBUILD_CFLAGS := $(LINUXINCLUDE) $(KBUILD_CFLAGS) -D__KERNEL__ \
-	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull" \
+	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull"
 
 KBUILD_AFLAGS := $(LINUXINCLUDE) $(KBUILD_AFLAGS) -D__ASSEMBLY__ \
-	-DKERNEL_ENTRY=0x$(shell $(NM) $(objtree)/$(KBUILD_IMAGE) 2>/dev/null | grep " kernel_entry" | cut -f1 -d \ ) \
-	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE)
+	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) \
+	-DKERNEL_ENTRY=0x$(shell $(NM) $(objtree)/$(KBUILD_IMAGE) 2>/dev/null | grep " kernel_entry" | cut -f1 -d \ )
 
 obj-y := $(obj)/head.o $(obj)/decompress.o $(obj)/dbg.o
 
+ifdef CONFIG_DEBUG_ZBOOT
 obj-$(CONFIG_SYS_SUPPORTS_ZBOOT_UART16550) += $(obj)/uart-16550.o
+obj-$(CONFIG_MACH_ALCHEMY)		   += $(obj)/uart-alchemy.o
+endif
 
 OBJCOPYFLAGS_vmlinux.bin := $(OBJCOPYFLAGS) -O binary -R .comment -S
 $(obj)/vmlinux.bin: $(KBUILD_IMAGE)

arch/mips/boot/compressed/dbg.c

@@ -5,11 +5,11 @@
  * please select SYS_SUPPORTS_ZBOOT_UART16550 for your machine. othewise, you
  * need to implement your own putc().
  */
-
+#include <linux/compiler.h>
 #include <linux/init.h>
 #include <linux/types.h>
 
-void __attribute__ ((weak)) putc(char c)
+void __weak putc(char c)
 {
 }
 

arch/mips/boot/compressed/decompress.c

@@ -5,8 +5,8 @@
  * Author: Matt Porter <mporter@mvista.com> Derived from
  * arch/ppc/boot/prep/misc.c
  *
- * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology
- * Author: Wu Zhangjin <wuzj@lemote.com>
+ * Copyright (C) 2009 Lemote, Inc.
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the

arch/mips/boot/compressed/uart-alchemy.c

@@ -0,0 +1,7 @@
+#include <asm/mach-au1x00/au1000.h>
+
+void putc(char c)
+{
+	/* all current (Jan. 2010) in-kernel boards */
+	alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+}

arch/mips/cavium-octeon/dma-octeon.c

@@ -41,7 +41,7 @@ struct bar1_index_state {
 };
 
 #ifdef CONFIG_PCI
-static DEFINE_SPINLOCK(bar1_lock);
+static DEFINE_RAW_SPINLOCK(bar1_lock);
 static struct bar1_index_state bar1_state[32];
 #endif
 
@@ -198,7 +198,7 @@ dma_addr_t octeon_map_dma_mem(struct device *dev, void *ptr, size_t size)
 		start_index = 31;
 
 	/* Only one processor can access the Bar register at once */
-	spin_lock_irqsave(&bar1_lock, flags);
+	raw_spin_lock_irqsave(&bar1_lock, flags);
 
 	/* Look through Bar1 for existing mapping that will work */
 	for (index = start_index; index >= 0; index--) {
@@ -250,7 +250,7 @@ dma_addr_t octeon_map_dma_mem(struct device *dev, void *ptr, size_t size)
 	       (unsigned long long) physical);
 
 done_unlock:
-	spin_unlock_irqrestore(&bar1_lock, flags);
+	raw_spin_unlock_irqrestore(&bar1_lock, flags);
 done:
 	pr_debug("dma_map_single 0x%llx->0x%llx\n", physical, result);
 	return result;
@@ -324,14 +324,14 @@ void octeon_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr)
 		      "Attempt to unmap an invalid address (0x%llx)\n",
 		      dma_addr);
 
-	spin_lock_irqsave(&bar1_lock, flags);
+	raw_spin_lock_irqsave(&bar1_lock, flags);
 	bar1_state[index].ref_count--;
 	if (bar1_state[index].ref_count == 0)
 		octeon_npi_write32(CVMX_NPI_PCI_BAR1_INDEXX(index), 0);
 	else if (unlikely(bar1_state[index].ref_count < 0))
 		panic("dma_unmap_single: Bar1[%u] reference count < 0\n",
 		      (int) index);
-	spin_unlock_irqrestore(&bar1_lock, flags);
+	raw_spin_unlock_irqrestore(&bar1_lock, flags);
 done:
 	pr_debug("dma_unmap_single 0x%llx\n", dma_addr);
 	return;

arch/mips/cavium-octeon/executive/cvmx-bootmem.c

@@ -253,7 +253,7 @@ int64_t cvmx_bootmem_phy_alloc(uint64_t req_size, uint64_t address_min,
 	 * impossible requests up front. (NOP for address_min == 0)
 	 */
 	if (alignment)
-		address_min = __ALIGN_MASK(address_min, (alignment - 1));
+		address_min = ALIGN(address_min, alignment);
 
 	/*
 	 * Reject inconsistent args.  We have adjusted these, so this
@@ -291,7 +291,7 @@ int64_t cvmx_bootmem_phy_alloc(uint64_t req_size, uint64_t address_min,
 		 * satisfy request.
 		 */
 		usable_base =
-		    __ALIGN_MASK(max(address_min, ent_addr), alignment - 1);
+		    ALIGN(max(address_min, ent_addr), alignment);
 		usable_max = min(address_max, ent_addr + ent_size);
 		/*
 		 * We should be able to allocate block at address
@@ -671,7 +671,7 @@ int64_t cvmx_bootmem_phy_named_block_alloc(uint64_t size, uint64_t min_addr,
 	 * coallesced when they are freed.  The alloc routine does the
 	 * same rounding up on all allocations.
 	 */
-	size = __ALIGN_MASK(size, (CVMX_BOOTMEM_ALIGNMENT_SIZE - 1));
+	size = ALIGN(size, CVMX_BOOTMEM_ALIGNMENT_SIZE);
 
 	addr_allocated = cvmx_bootmem_phy_alloc(size, min_addr, max_addr,
 						alignment,

arch/mips/cavium-octeon/executive/cvmx-sysinfo.c

@@ -115,4 +115,3 @@ int cvmx_sysinfo_minimal_initialize(void *phy_mem_desc_ptr,
 
 	return 1;
 }
-

arch/mips/cavium-octeon/octeon-irq.c

@@ -13,9 +13,8 @@
 #include <asm/octeon/cvmx-pexp-defs.h>
 #include <asm/octeon/cvmx-npi-defs.h>
 
-DEFINE_RWLOCK(octeon_irq_ciu0_rwlock);
-DEFINE_RWLOCK(octeon_irq_ciu1_rwlock);
-DEFINE_SPINLOCK(octeon_irq_msi_lock);
+static DEFINE_RAW_SPINLOCK(octeon_irq_ciu0_lock);
+static DEFINE_RAW_SPINLOCK(octeon_irq_ciu1_lock);
 
 static int octeon_coreid_for_cpu(int cpu)
 {
@@ -51,9 +50,6 @@ static void octeon_irq_core_eoi(unsigned int irq)
 	 */
 	if (desc->status & IRQ_DISABLED)
 		return;
-
-	/* There is a race here.  We should fix it.  */
-
 	/*
 	 * We don't need to disable IRQs to make these atomic since
 	 * they are already disabled earlier in the low level
@@ -141,19 +137,12 @@ static void octeon_irq_ciu0_enable(unsigned int irq)
 	uint64_t en0;
 	int bit = irq - OCTEON_IRQ_WORKQ0;	/* Bit 0-63 of EN0 */
 
-	/*
-	 * A read lock is used here to make sure only one core is ever
-	 * updating the CIU enable bits at a time. During an enable
-	 * the cores don't interfere with each other. During a disable
-	 * the write lock stops any enables that might cause a
-	 * problem.
-	 */
-	read_lock_irqsave(&octeon_irq_ciu0_rwlock, flags);
+	raw_spin_lock_irqsave(&octeon_irq_ciu0_lock, flags);
 	en0 = cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
 	en0 |= 1ull << bit;
 	cvmx_write_csr(CVMX_CIU_INTX_EN0(coreid * 2), en0);
 	cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
-	read_unlock_irqrestore(&octeon_irq_ciu0_rwlock, flags);
+	raw_spin_unlock_irqrestore(&octeon_irq_ciu0_lock, flags);
 }
 
 static void octeon_irq_ciu0_disable(unsigned int irq)
@@ -162,7 +151,7 @@ static void octeon_irq_ciu0_disable(unsigned int irq)
 	unsigned long flags;
 	uint64_t en0;
 	int cpu;
-	write_lock_irqsave(&octeon_irq_ciu0_rwlock, flags);
+	raw_spin_lock_irqsave(&octeon_irq_ciu0_lock, flags);
 	for_each_online_cpu(cpu) {
 		int coreid = octeon_coreid_for_cpu(cpu);
 		en0 = cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
@@ -174,7 +163,7 @@ static void octeon_irq_ciu0_disable(unsigned int irq)
 	 * of them are done.
 	 */
 	cvmx_read_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2));
-	write_unlock_irqrestore(&octeon_irq_ciu0_rwlock, flags);
+	raw_spin_unlock_irqrestore(&octeon_irq_ciu0_lock, flags);
 }
 
 /*
@@ -193,7 +182,7 @@ static void octeon_irq_ciu0_enable_v2(unsigned int irq)
  * Disable the irq on the current core for chips that have the EN*_W1{S,C}
  * registers.
  */
-static void octeon_irq_ciu0_disable_v2(unsigned int irq)
+static void octeon_irq_ciu0_ack_v2(unsigned int irq)
 {
 	int index = cvmx_get_core_num() * 2;
 	u64 mask = 1ull << (irq - OCTEON_IRQ_WORKQ0);
@@ -201,6 +190,43 @@ static void octeon_irq_ciu0_disable_v2(unsigned int irq)
 	cvmx_write_csr(CVMX_CIU_INTX_EN0_W1C(index), mask);
 }
 
+/*
+ * CIU timer type interrupts must be acknoleged by writing a '1' bit
+ * to their sum0 bit.
+ */
+static void octeon_irq_ciu0_timer_ack(unsigned int irq)
+{
+	int index = cvmx_get_core_num() * 2;
+	uint64_t mask = 1ull << (irq - OCTEON_IRQ_WORKQ0);
+	cvmx_write_csr(CVMX_CIU_INTX_SUM0(index), mask);
+}
+
+static void octeon_irq_ciu0_timer_ack_v1(unsigned int irq)
+{
+	octeon_irq_ciu0_timer_ack(irq);
+	octeon_irq_ciu0_ack(irq);
+}
+
+static void octeon_irq_ciu0_timer_ack_v2(unsigned int irq)
+{
+	octeon_irq_ciu0_timer_ack(irq);
+	octeon_irq_ciu0_ack_v2(irq);
+}
+
+/*
+ * Enable the irq on the current core for chips that have the EN*_W1{S,C}
+ * registers.
+ */
+static void octeon_irq_ciu0_eoi_v2(unsigned int irq)
+{
+	struct irq_desc *desc = irq_desc + irq;
+	int index = cvmx_get_core_num() * 2;
+	u64 mask = 1ull << (irq - OCTEON_IRQ_WORKQ0);
+
+	if ((desc->status & IRQ_DISABLED) == 0)
+		cvmx_write_csr(CVMX_CIU_INTX_EN0_W1S(index), mask);
+}
+
 /*
  * Disable the irq on the all cores for chips that have the EN*_W1{S,C}
  * registers.
@@ -223,7 +249,7 @@ static int octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask *
 	unsigned long flags;
 	int bit = irq - OCTEON_IRQ_WORKQ0;	/* Bit 0-63 of EN0 */
 
-	write_lock_irqsave(&octeon_irq_ciu0_rwlock, flags);
+	raw_spin_lock_irqsave(&octeon_irq_ciu0_lock, flags);
 	for_each_online_cpu(cpu) {
 		int coreid = octeon_coreid_for_cpu(cpu);
 		uint64_t en0 =
@@ -239,7 +265,7 @@ static int octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask *
 	 * of them are done.
 	 */
 	cvmx_read_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2));
-	write_unlock_irqrestore(&octeon_irq_ciu0_rwlock, flags);
+	raw_spin_unlock_irqrestore(&octeon_irq_ciu0_lock, flags);
 
 	return 0;
 }
@@ -272,8 +298,8 @@ static struct irq_chip octeon_irq_chip_ciu0_v2 = {
 	.name = "CIU0",
 	.enable = octeon_irq_ciu0_enable_v2,
 	.disable = octeon_irq_ciu0_disable_all_v2,
-	.ack = octeon_irq_ciu0_disable_v2,
-	.eoi = octeon_irq_ciu0_enable_v2,
+	.ack = octeon_irq_ciu0_ack_v2,
+	.eoi = octeon_irq_ciu0_eoi_v2,
 #ifdef CONFIG_SMP
 	.set_affinity = octeon_irq_ciu0_set_affinity_v2,
 #endif
@@ -290,6 +316,28 @@ static struct irq_chip octeon_irq_chip_ciu0 = {
 #endif
 };
 
+static struct irq_chip octeon_irq_chip_ciu0_timer_v2 = {
+	.name = "CIU0-T",
+	.enable = octeon_irq_ciu0_enable_v2,
+	.disable = octeon_irq_ciu0_disable_all_v2,
+	.ack = octeon_irq_ciu0_timer_ack_v2,
+	.eoi = octeon_irq_ciu0_eoi_v2,
+#ifdef CONFIG_SMP
+	.set_affinity = octeon_irq_ciu0_set_affinity_v2,
+#endif
+};
+
+static struct irq_chip octeon_irq_chip_ciu0_timer = {
+	.name = "CIU0-T",
+	.enable = octeon_irq_ciu0_enable,
+	.disable = octeon_irq_ciu0_disable,
+	.ack = octeon_irq_ciu0_timer_ack_v1,
+	.eoi = octeon_irq_ciu0_eoi,
+#ifdef CONFIG_SMP
+	.set_affinity = octeon_irq_ciu0_set_affinity,
+#endif
+};
+
 
 static void octeon_irq_ciu1_ack(unsigned int irq)
 {
@@ -322,19 +370,12 @@ static void octeon_irq_ciu1_enable(unsigned int irq)
 	uint64_t en1;
 	int bit = irq - OCTEON_IRQ_WDOG0;	/* Bit 0-63 of EN1 */
 
-	/*
-	 * A read lock is used here to make sure only one core is ever
-	 * updating the CIU enable bits at a time.  During an enable
-	 * the cores don't interfere with each other.  During a disable
-	 * the write lock stops any enables that might cause a
-	 * problem.
-	 */
-	read_lock_irqsave(&octeon_irq_ciu1_rwlock, flags);
+	raw_spin_lock_irqsave(&octeon_irq_ciu1_lock, flags);
 	en1 = cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1));
 	en1 |= 1ull << bit;
 	cvmx_write_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1), en1);
 	cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1));
-	read_unlock_irqrestore(&octeon_irq_ciu1_rwlock, flags);
+	raw_spin_unlock_irqrestore(&octeon_irq_ciu1_lock, flags);
 }
 
 static void octeon_irq_ciu1_disable(unsigned int irq)
@@ -343,7 +384,7 @@ static void octeon_irq_ciu1_disable(unsigned int irq)
 	unsigned long flags;
 	uint64_t en1;
 	int cpu;
-	write_lock_irqsave(&octeon_irq_ciu1_rwlock, flags);
+	raw_spin_lock_irqsave(&octeon_irq_ciu1_lock, flags);
 	for_each_online_cpu(cpu) {
 		int coreid = octeon_coreid_for_cpu(cpu);
 		en1 = cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1));
@@ -355,7 +396,7 @@ static void octeon_irq_ciu1_disable(unsigned int irq)
 	 * of them are done.
 	 */
 	cvmx_read_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num() * 2 + 1));
-	write_unlock_irqrestore(&octeon_irq_ciu1_rwlock, flags);
+	raw_spin_unlock_irqrestore(&octeon_irq_ciu1_lock, flags);
 }
 
 /*
@@ -374,7 +415,7 @@ static void octeon_irq_ciu1_enable_v2(unsigned int irq)
  * Disable the irq on the current core for chips that have the EN*_W1{S,C}
  * registers.
  */
-static void octeon_irq_ciu1_disable_v2(unsigned int irq)
+static void octeon_irq_ciu1_ack_v2(unsigned int irq)
 {
 	int index = cvmx_get_core_num() * 2 + 1;
 	u64 mask = 1ull << (irq - OCTEON_IRQ_WDOG0);
@@ -382,6 +423,20 @@ static void octeon_irq_ciu1_disable_v2(unsigned int irq)
 	cvmx_write_csr(CVMX_CIU_INTX_EN1_W1C(index), mask);
 }
 
+/*
+ * Enable the irq on the current core for chips that have the EN*_W1{S,C}
+ * registers.
+ */
+static void octeon_irq_ciu1_eoi_v2(unsigned int irq)
+{
+	struct irq_desc *desc = irq_desc + irq;
+	int index = cvmx_get_core_num() * 2 + 1;
+	u64 mask = 1ull << (irq - OCTEON_IRQ_WDOG0);
+
+	if ((desc->status & IRQ_DISABLED) == 0)
+		cvmx_write_csr(CVMX_CIU_INTX_EN1_W1S(index), mask);
+}
+
 /*
  * Disable the irq on the all cores for chips that have the EN*_W1{S,C}
  * registers.
@@ -405,7 +460,7 @@ static int octeon_irq_ciu1_set_affinity(unsigned int irq,
 	unsigned long flags;
 	int bit = irq - OCTEON_IRQ_WDOG0;	/* Bit 0-63 of EN1 */
 
-	write_lock_irqsave(&octeon_irq_ciu1_rwlock, flags);
+	raw_spin_lock_irqsave(&octeon_irq_ciu1_lock, flags);
 	for_each_online_cpu(cpu) {
 		int coreid = octeon_coreid_for_cpu(cpu);
 		uint64_t en1 =
@@ -422,7 +477,7 @@ static int octeon_irq_ciu1_set_affinity(unsigned int irq,
 	 * of them are done.
 	 */
 	cvmx_read_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num() * 2 + 1));
-	write_unlock_irqrestore(&octeon_irq_ciu1_rwlock, flags);
+	raw_spin_unlock_irqrestore(&octeon_irq_ciu1_lock, flags);
 
 	return 0;
 }
@@ -455,8 +510,8 @@ static struct irq_chip octeon_irq_chip_ciu1_v2 = {
 	.name = "CIU0",
 	.enable = octeon_irq_ciu1_enable_v2,
 	.disable = octeon_irq_ciu1_disable_all_v2,
-	.ack = octeon_irq_ciu1_disable_v2,
-	.eoi = octeon_irq_ciu1_enable_v2,
+	.ack = octeon_irq_ciu1_ack_v2,
+	.eoi = octeon_irq_ciu1_eoi_v2,
 #ifdef CONFIG_SMP
 	.set_affinity = octeon_irq_ciu1_set_affinity_v2,
 #endif
@@ -475,6 +530,8 @@ static struct irq_chip octeon_irq_chip_ciu1 = {
 
 #ifdef CONFIG_PCI_MSI
 
+static DEFINE_RAW_SPINLOCK(octeon_irq_msi_lock);
+
 static void octeon_irq_msi_ack(unsigned int irq)
 {
 	if (!octeon_has_feature(OCTEON_FEATURE_PCIE)) {
@@ -515,12 +572,12 @@ static void octeon_irq_msi_enable(unsigned int irq)
 		 */
 		uint64_t en;
 		unsigned long flags;
-		spin_lock_irqsave(&octeon_irq_msi_lock, flags);
+		raw_spin_lock_irqsave(&octeon_irq_msi_lock, flags);
 		en = cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0);
 		en |= 1ull << (irq - OCTEON_IRQ_MSI_BIT0);
 		cvmx_write_csr(CVMX_PEXP_NPEI_MSI_ENB0, en);
 		cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0);
-		spin_unlock_irqrestore(&octeon_irq_msi_lock, flags);
+		raw_spin_unlock_irqrestore(&octeon_irq_msi_lock, flags);
 	}
 }
 
@@ -537,12 +594,12 @@ static void octeon_irq_msi_disable(unsigned int irq)
 		 */
 		uint64_t en;
 		unsigned long flags;
-		spin_lock_irqsave(&octeon_irq_msi_lock, flags);
+		raw_spin_lock_irqsave(&octeon_irq_msi_lock, flags);
 		en = cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0);
 		en &= ~(1ull << (irq - OCTEON_IRQ_MSI_BIT0));
 		cvmx_write_csr(CVMX_PEXP_NPEI_MSI_ENB0, en);
 		cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0);
-		spin_unlock_irqrestore(&octeon_irq_msi_lock, flags);
+		raw_spin_unlock_irqrestore(&octeon_irq_msi_lock, flags);
 	}
 }
 
@@ -559,6 +616,7 @@ void __init arch_init_irq(void)
 {
 	int irq;
 	struct irq_chip *chip0;
+	struct irq_chip *chip0_timer;
 	struct irq_chip *chip1;
 
 #ifdef CONFIG_SMP
@@ -574,9 +632,11 @@ void __init arch_init_irq(void)
 	    OCTEON_IS_MODEL(OCTEON_CN56XX_PASS2_X) ||
 	    OCTEON_IS_MODEL(OCTEON_CN52XX_PASS2_X)) {
 		chip0 = &octeon_irq_chip_ciu0_v2;
+		chip0_timer = &octeon_irq_chip_ciu0_timer_v2;
 		chip1 = &octeon_irq_chip_ciu1_v2;
 	} else {
 		chip0 = &octeon_irq_chip_ciu0;
+		chip0_timer = &octeon_irq_chip_ciu0_timer;
 		chip1 = &octeon_irq_chip_ciu1;
 	}
 
@@ -590,7 +650,21 @@ void __init arch_init_irq(void)
 
 	/* 24 - 87 CIU_INT_SUM0 */
 	for (irq = OCTEON_IRQ_WORKQ0; irq <= OCTEON_IRQ_BOOTDMA; irq++) {
-		set_irq_chip_and_handler(irq, chip0, handle_percpu_irq);
+		switch (irq) {
+		case OCTEON_IRQ_GMX_DRP0:
+		case OCTEON_IRQ_GMX_DRP1:
+		case OCTEON_IRQ_IPD_DRP:
+		case OCTEON_IRQ_KEY_ZERO:
+		case OCTEON_IRQ_TIMER0:
+		case OCTEON_IRQ_TIMER1:
+		case OCTEON_IRQ_TIMER2:
+		case OCTEON_IRQ_TIMER3:
+			set_irq_chip_and_handler(irq, chip0_timer, handle_percpu_irq);
+			break;
+		default:
+			set_irq_chip_and_handler(irq, chip0, handle_percpu_irq);
+			break;
+		}
 	}
 
 	/* 88 - 151 CIU_INT_SUM1 */

arch/mips/cavium-octeon/octeon-platform.c

@@ -9,6 +9,7 @@
 
 #include <linux/init.h>
 #include <linux/irq.h>
+#include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
@@ -159,6 +160,90 @@ out:
 }
 device_initcall(octeon_rng_device_init);
 
+static struct i2c_board_info __initdata octeon_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("ds1337", 0x68),
+	},
+};
+
+static int __init octeon_i2c_devices_init(void)
+{
+	return i2c_register_board_info(0, octeon_i2c_devices,
+				       ARRAY_SIZE(octeon_i2c_devices));
+}
+arch_initcall(octeon_i2c_devices_init);
+
+#define OCTEON_I2C_IO_BASE 0x1180000001000ull
+#define OCTEON_I2C_IO_UNIT_OFFSET 0x200
+
+static struct octeon_i2c_data octeon_i2c_data[2];
+
+static int __init octeon_i2c_device_init(void)
+{
+	struct platform_device *pd;
+	int ret = 0;
+	int port, num_ports;
+
+	struct resource i2c_resources[] = {
+		{
+			.flags	= IORESOURCE_MEM,
+		}, {
+			.flags	= IORESOURCE_IRQ,
+		}
+	};
+
+	if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN52XX))
+		num_ports = 2;
+	else
+		num_ports = 1;
+
+	for (port = 0; port < num_ports; port++) {
+		octeon_i2c_data[port].sys_freq = octeon_get_clock_rate();
+		/*FIXME: should be examined. At the moment is set for 100Khz */
+		octeon_i2c_data[port].i2c_freq = 100000;
+
+		pd = platform_device_alloc("i2c-octeon", port);
+		if (!pd) {
+			ret = -ENOMEM;
+			goto out;
+		}
+
+		pd->dev.platform_data = octeon_i2c_data + port;
+
+		i2c_resources[0].start =
+			OCTEON_I2C_IO_BASE + (port * OCTEON_I2C_IO_UNIT_OFFSET);
+		i2c_resources[0].end = i2c_resources[0].start + 0x1f;
+		switch (port) {
+		case 0:
+			i2c_resources[1].start = OCTEON_IRQ_TWSI;
+			i2c_resources[1].end = OCTEON_IRQ_TWSI;
+			break;
+		case 1:
+			i2c_resources[1].start = OCTEON_IRQ_TWSI2;
+			i2c_resources[1].end = OCTEON_IRQ_TWSI2;
+			break;
+		default:
+			BUG();
+		}
+
+		ret = platform_device_add_resources(pd,
+						    i2c_resources,
+						    ARRAY_SIZE(i2c_resources));
+		if (ret)
+			goto fail;
+
+		ret = platform_device_add(pd);
+		if (ret)
+			goto fail;
+	}
+	return ret;
+fail:
+	platform_device_put(pd);
+out:
+	return ret;
+}
+device_initcall(octeon_i2c_device_init);
+
 /* Octeon SMI/MDIO interface.  */
 static int __init octeon_mdiobus_device_init(void)
 {

arch/mips/cavium-octeon/smp.c

@@ -327,7 +327,7 @@ static void octeon_cpu_die(unsigned int cpu)
 				   avail_coremask);
 	}
 
-	pr_info("Reset core %d. Available Coremask = %x \n", coreid,
+	pr_info("Reset core %d. Available Coremask = %x\n", coreid,
 		avail_coremask);
 	cvmx_write_csr(CVMX_CIU_PP_RST, 1 << coreid);
 	cvmx_write_csr(CVMX_CIU_PP_RST, 0);

arch/mips/cobalt/pci.c

@@ -25,7 +25,7 @@ static struct resource cobalt_mem_resource = {
 
 static struct resource cobalt_io_resource = {
 	.start	= 0x1000,
-	.end	= GT_DEF_PCI0_IO_SIZE - 1,
+	.end	= 0xffffffUL,
 	.name	= "PCI I/O",
 	.flags	= IORESOURCE_IO,
 };

arch/mips/configs/pb1200_defconfig

@@ -0,0 +1,1568 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33
+# Fri Feb 26 10:23:34 2010
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+CONFIG_MACH_ALCHEMY=y
+# CONFIG_AR7 is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MACH_LOONGSON is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_NEC_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_POWERTV is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+CONFIG_ALCHEMY_GPIOINT_AU1000=y
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+CONFIG_MIPS_PB1200=y
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_XXS1500 is not set
+CONFIG_SOC_AU1200=y
+CONFIG_SOC_AU1X00=y
+CONFIG_LOONGSON_UART_BASE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_SYS_SUPPORTS_ZBOOT=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_64BIT_PHYS_ADDR=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_KSM=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=100
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-pb1200"
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_BZIP2 is not set
+CONFIG_KERNEL_LZMA=y
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_MMU=y
+CONFIG_PCCARD=y
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+# CONFIG_PCMCIA_IOCTL is not set
+
+#
+# PC-card bridges
+#
+# CONFIG_PCMCIA_AU1X00 is not set
+CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=y
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_AU1550 is not set
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_UB=y
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_XFER_MODE=y
+CONFIG_IDE_ATAPI=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_IDE_TASK_IOCTL=y
+# CONFIG_IDE_PROC_FS is not set
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDE_AU1XXX=y
+CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA=y
+# CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_MIPS_AU1X00_ENET is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_AU1X00=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_HELPER_AUTO is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_AU1550=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_AU1550=y
+CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+CONFIG_HWMON_VID=y
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+CONFIG_SENSORS_ADM1025=y
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+CONFIG_SENSORS_LM70=y
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_AU1200=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_AC97_CODEC=y
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_MIPS is not set
+# CONFIG_SND_USB is not set
+# CONFIG_SND_PCMCIA is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_SOC_AU1XPSC=y
+CONFIG_SND_SOC_AU1XPSC_I2S=y
+CONFIG_SND_SOC_AU1XPSC_AC97=y
+CONFIG_SND_SOC_DB1200=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_AC97_CODEC=y
+CONFIG_SND_SOC_WM8731=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AU1X=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AU1XXX=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+CONFIG_NLS_CODEPAGE_1250=y
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyS0,115200"
+# CONFIG_CMDLINE_OVERRIDE is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_RUNTIME_DEBUG is not set
+CONFIG_DEBUG_ZBOOT=y
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+# CONFIG_SECURITY is not set
+CONFIG_SECURITYFS=y
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y

arch/mips/dec/kn01-berr.c

@@ -46,7 +46,7 @@
  * There is no default value -- it has to be initialized.
  */
 u16 cached_kn01_csr;
-DEFINE_SPINLOCK(kn01_lock);
+static DEFINE_RAW_SPINLOCK(kn01_lock);
 
 
 static inline void dec_kn01_be_ack(void)
@@ -54,12 +54,12 @@ static inline void dec_kn01_be_ack(void)
 	volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR);
 	unsigned long flags;
 
-	spin_lock_irqsave(&kn01_lock, flags);
+	raw_spin_lock_irqsave(&kn01_lock, flags);
 
 	*csr = cached_kn01_csr | KN01_CSR_MEMERR;	/* Clear bus IRQ. */
 	iob();
 
-	spin_unlock_irqrestore(&kn01_lock, flags);
+	raw_spin_unlock_irqrestore(&kn01_lock, flags);
 }
 
 static int dec_kn01_be_backend(struct pt_regs *regs, int is_fixup, int invoker)
@@ -182,7 +182,7 @@ void __init dec_kn01_be_init(void)
 	volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR);
 	unsigned long flags;
 
-	spin_lock_irqsave(&kn01_lock, flags);
+	raw_spin_lock_irqsave(&kn01_lock, flags);
 
 	/* Preset write-only bits of the Control Register cache. */
 	cached_kn01_csr = *csr;
@@ -194,7 +194,7 @@ void __init dec_kn01_be_init(void)
 	*csr = cached_kn01_csr;
 	iob();
 
-	spin_unlock_irqrestore(&kn01_lock, flags);
+	raw_spin_unlock_irqrestore(&kn01_lock, flags);
 
 	/* Clear any leftover errors from the firmware. */
 	dec_kn01_be_ack();

arch/mips/dec/prom/locore.S

@@ -27,4 +27,3 @@ NESTED(genexcept_early, 0, sp)
 	jr	k0
 	 rfe
 END(genexcept_early)
-

arch/mips/include/asm/atomic.h

@@ -137,7 +137,7 @@ static __inline__ int atomic_add_return(int i, atomic_t * v)
 {
 	int result;
 
-	smp_llsc_mb();
+	smp_mb__before_llsc();
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		int temp;
@@ -189,7 +189,7 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v)
 {
 	int result;
 
-	smp_llsc_mb();
+	smp_mb__before_llsc();
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		int temp;
@@ -249,7 +249,7 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v)
 {
 	int result;
 
-	smp_llsc_mb();
+	smp_mb__before_llsc();
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		int temp;
@@ -516,7 +516,7 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v)
 {
 	long result;
 
-	smp_llsc_mb();
+	smp_mb__before_llsc();
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		long temp;
@@ -568,7 +568,7 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
 {
 	long result;
 
-	smp_llsc_mb();
+	smp_mb__before_llsc();
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		long temp;
@@ -628,7 +628,7 @@ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v)
 {
 	long result;
 
-	smp_llsc_mb();
+	smp_mb__before_llsc();
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		long temp;
@@ -788,9 +788,9 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
  * atomic*_return operations are serializing but not the non-*_return
  * versions.
  */
-#define smp_mb__before_atomic_dec()	smp_llsc_mb()
+#define smp_mb__before_atomic_dec()	smp_mb__before_llsc()
 #define smp_mb__after_atomic_dec()	smp_llsc_mb()
-#define smp_mb__before_atomic_inc()	smp_llsc_mb()
+#define smp_mb__before_atomic_inc()	smp_mb__before_llsc()
 #define smp_mb__after_atomic_inc()	smp_llsc_mb()
 
 #include <asm-generic/atomic-long.h>

arch/mips/include/asm/barrier.h

@@ -88,12 +88,20 @@
 		: /* no output */		\
 		: "m" (*(int *)CKSEG1)		\
 		: "memory")
-
-#define fast_wmb()	__sync()
-#define fast_rmb()	__sync()
-#define fast_mb()	__sync()
-#ifdef CONFIG_SGI_IP28
-#define fast_iob()				\
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+# define OCTEON_SYNCW_STR	".set push\n.set arch=octeon\nsyncw\nsyncw\n.set pop\n"
+# define __syncw() 	__asm__ __volatile__(OCTEON_SYNCW_STR : : : "memory")
+
+# define fast_wmb()	__syncw()
+# define fast_rmb()	barrier()
+# define fast_mb()	__sync()
+# define fast_iob()	do { } while (0)
+#else /* ! CONFIG_CPU_CAVIUM_OCTEON */
+# define fast_wmb()	__sync()
+# define fast_rmb()	__sync()
+# define fast_mb()	__sync()
+# ifdef CONFIG_SGI_IP28
+#  define fast_iob()				\
 	__asm__ __volatile__(			\
 		".set	push\n\t"		\
 		".set	noreorder\n\t"		\
@@ -104,13 +112,14 @@
 		: /* no output */		\
 		: "m" (*(int *)CKSEG1ADDR(0x1fa00004)) \
 		: "memory")
-#else
-#define fast_iob()				\
+# else
+#  define fast_iob()				\
 	do {					\
 		__sync();			\
 		__fast_iob();			\
 	} while (0)
-#endif
+# endif
+#endif /* CONFIG_CPU_CAVIUM_OCTEON */
 
 #ifdef CONFIG_CPU_HAS_WB
 
@@ -131,25 +140,42 @@
 #endif /* !CONFIG_CPU_HAS_WB */
 
 #if defined(CONFIG_WEAK_ORDERING) && defined(CONFIG_SMP)
-#define __WEAK_ORDERING_MB	"       sync	\n"
+# ifdef CONFIG_CPU_CAVIUM_OCTEON
+#  define smp_mb()	__sync()
+#  define smp_rmb()	barrier()
+#  define smp_wmb()	__syncw()
+# else
+#  define smp_mb()	__asm__ __volatile__("sync" : : :"memory")
+#  define smp_rmb()	__asm__ __volatile__("sync" : : :"memory")
+#  define smp_wmb()	__asm__ __volatile__("sync" : : :"memory")
+# endif
 #else
-#define __WEAK_ORDERING_MB	"		\n"
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
 #endif
+
 #if defined(CONFIG_WEAK_REORDERING_BEYOND_LLSC) && defined(CONFIG_SMP)
 #define __WEAK_LLSC_MB		"       sync	\n"
 #else
 #define __WEAK_LLSC_MB		"		\n"
 #endif
 
-#define smp_mb()	__asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory")
-#define smp_rmb()	__asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory")
-#define smp_wmb()	__asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory")
-
 #define set_mb(var, value) \
 	do { var = value; smp_mb(); } while (0)
 
 #define smp_llsc_mb()	__asm__ __volatile__(__WEAK_LLSC_MB : : :"memory")
-#define smp_llsc_rmb()	__asm__ __volatile__(__WEAK_LLSC_MB : : :"memory")
-#define smp_llsc_wmb()	__asm__ __volatile__(__WEAK_LLSC_MB : : :"memory")
+
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+#define smp_mb__before_llsc() smp_wmb()
+/* Cause previous writes to become visible on all CPUs as soon as possible */
+#define nudge_writes() __asm__ __volatile__(".set push\n\t"		\
+					    ".set arch=octeon\n\t"	\
+					    "syncw\n\t"			\
+					    ".set pop" : : : "memory")
+#else
+#define smp_mb__before_llsc() smp_llsc_mb()
+#define nudge_writes() mb()
+#endif
 
 #endif /* __ASM_BARRIER_H */

arch/mips/include/asm/bitops.h

@@ -42,7 +42,7 @@
 /*
  * clear_bit() doesn't provide any barrier for the compiler.
  */
-#define smp_mb__before_clear_bit()	smp_llsc_mb()
+#define smp_mb__before_clear_bit()	smp_mb__before_llsc()
 #define smp_mb__after_clear_bit()	smp_llsc_mb()
 
 /*
@@ -258,7 +258,7 @@ static inline int test_and_set_bit(unsigned long nr,
 	unsigned short bit = nr & SZLONG_MASK;
 	unsigned long res;
 
-	smp_llsc_mb();
+	smp_mb__before_llsc();
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
@@ -395,7 +395,7 @@ static inline int test_and_clear_bit(unsigned long nr,
 	unsigned short bit = nr & SZLONG_MASK;
 	unsigned long res;
 
-	smp_llsc_mb();
+	smp_mb__before_llsc();
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
@@ -485,7 +485,7 @@ static inline int test_and_change_bit(unsigned long nr,
 	unsigned short bit = nr & SZLONG_MASK;
 	unsigned long res;
 
-	smp_llsc_mb();
+	smp_mb__before_llsc();
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);

arch/mips/include/asm/cmpxchg.h

@@ -72,14 +72,14 @@
  */
 extern void __cmpxchg_called_with_bad_pointer(void);
 
-#define __cmpxchg(ptr, old, new, barrier)				\
+#define __cmpxchg(ptr, old, new, pre_barrier, post_barrier)		\
 ({									\
 	__typeof__(ptr) __ptr = (ptr);					\
 	__typeof__(*(ptr)) __old = (old);				\
 	__typeof__(*(ptr)) __new = (new);				\
 	__typeof__(*(ptr)) __res = 0;					\
 									\
-	barrier;							\
+	pre_barrier;							\
 									\
 	switch (sizeof(*(__ptr))) {					\
 	case 4:								\
@@ -96,13 +96,13 @@ extern void __cmpxchg_called_with_bad_pointer(void);
 		break;							\
 	}								\
 									\
-	barrier;							\
+	post_barrier;							\
 									\
 	__res;								\
 })
 
-#define cmpxchg(ptr, old, new)		__cmpxchg(ptr, old, new, smp_llsc_mb())
-#define cmpxchg_local(ptr, old, new)	__cmpxchg(ptr, old, new, )
+#define cmpxchg(ptr, old, new)		__cmpxchg(ptr, old, new, smp_mb__before_llsc(), smp_llsc_mb())
+#define cmpxchg_local(ptr, old, new)	__cmpxchg(ptr, old, new, , )
 
 #define cmpxchg64(ptr, o, n)						\
   ({									\

arch/mips/include/asm/cpu-features.h

@@ -95,6 +95,9 @@
 #ifndef cpu_has_smartmips
 #define cpu_has_smartmips      (cpu_data[0].ases & MIPS_ASE_SMARTMIPS)
 #endif
+#ifndef kernel_uses_smartmips_rixi
+#define kernel_uses_smartmips_rixi 0
+#endif
 #ifndef cpu_has_vtag_icache
 #define cpu_has_vtag_icache	(cpu_data[0].icache.flags & MIPS_CACHE_VTAG)
 #endif

arch/mips/include/asm/cpu.h

@@ -224,7 +224,7 @@ enum cpu_type_enum {
 	 * MIPS64 class processors
 	 */
 	CPU_5KC, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2,
-	CPU_CAVIUM_OCTEON,
+	CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS,
 
 	CPU_LAST
 };

arch/mips/include/asm/current.h

@@ -1,23 +1 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1998, 2002 Ralf Baechle
- * Copyright (C) 1999 Silicon Graphics, Inc.
- */
-#ifndef _ASM_CURRENT_H
-#define _ASM_CURRENT_H
-
-#include <linux/thread_info.h>
-
-struct task_struct;
-
-static inline struct task_struct * get_current(void)
-{
-	return current_thread_info()->task;
-}
-
-#define current		get_current()
-
-#endif /* _ASM_CURRENT_H */
+#include <asm-generic/current.h>

arch/mips/include/asm/dec/kn01.h

@@ -80,7 +80,6 @@
 struct pt_regs;
 
 extern u16 cached_kn01_csr;
-extern spinlock_t kn01_lock;
 
 extern void dec_kn01_be_init(void);
 extern int dec_kn01_be_handler(struct pt_regs *regs, int is_fixup);

arch/mips/include/asm/device.h

@@ -4,4 +4,3 @@
  * This file is released under the GPLv2
  */
 #include <asm-generic/device.h>
-

arch/mips/include/asm/elf.h

@@ -334,14 +334,14 @@ extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *);
 
 #define ELF_HWCAP       (0)
 
-/* This yields a string that ld.so will use to load implementation
-   specific libraries for optimization.  This is more specific in
-   intent than poking at uname or /proc/cpuinfo.
-
-   For the moment, we have only optimizations for the Intel generations,
-   but that could change... */
+/*
+ * This yields a string that ld.so will use to load implementation
+ * specific libraries for optimization.  This is more specific in
+ * intent than poking at uname or /proc/cpuinfo.
+ */
 
-#define ELF_PLATFORM  (NULL)
+#define ELF_PLATFORM  __elf_platform
+extern const char *__elf_platform;
 
 /*
  * See comments in asm-alpha/elf.h, this is the same thing

arch/mips/include/asm/ftrace.h

@@ -4,7 +4,7 @@
  * more details.
  *
  * Copyright (C) 2009 DSLab, Lanzhou University, China
- * Author: Wu Zhangjin <wuzj@lemote.com>
+ * Author: Wu Zhangjin <wuzhangjin@gmail.com>
  */
 
 #ifndef _ASM_MIPS_FTRACE_H

arch/mips/include/asm/i8259.h

@@ -35,7 +35,7 @@
 #define SLAVE_ICW4_DEFAULT	0x01
 #define PIC_ICW4_AEOI		2
 
-extern spinlock_t i8259A_lock;
+extern raw_spinlock_t i8259A_lock;
 
 extern int i8259A_irq_pending(unsigned int irq);
 extern void make_8259A_irq(unsigned int irq);
@@ -51,7 +51,7 @@ static inline int i8259_irq(void)
 {
 	int irq;
 
-	spin_lock(&i8259A_lock);
+	raw_spin_lock(&i8259A_lock);
 
 	/* Perform an interrupt acknowledge cycle on controller 1. */
 	outb(0x0C, PIC_MASTER_CMD);		/* prepare for poll */
@@ -78,7 +78,7 @@ static inline int i8259_irq(void)
 			irq = -1;
 	}
 
-	spin_unlock(&i8259A_lock);
+	raw_spin_unlock(&i8259A_lock);
 
 	return likely(irq >= 0) ? irq + I8259A_IRQ_BASE : irq;
 }