Merge branch 'renesas-kzm9g' into renesas-board

* renesas-kzm9g:
  ARM: shmobile: kzm9g: defconfig enable INOTIFY_USER
  ARM: mach-shmobile: add SDHI2 to the 2.8V fixed regulator consumers on kzm9g
  ARM: mach-shmobile: add fixed voltage regulators to kzm9g
  ARM: shmobile: kzm9g: enable DMAEngine on MMCIF
  ARM: shmobile: kzm9g: enable DMAEngine on FSI
  ARM: shmobile: kzm9g: enable MicroSD
  ARM: shmobile: kzm9g: enable USB function

arch/arm/configs/kzm9g_defconfig

@@ -100,7 +100,12 @@ CONFIG_SND_SOC_SH4_FSI=y
 CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_R8A66597_HCD=y
+CONFIG_USB_RENESAS_USBHS=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_RENESAS_USBHS_UDC=y
+CONFIG_USB_ETH=m
+CONFIG_USB_MASS_STORAGE=m
 CONFIG_MMC=y
 # CONFIG_MMC_BLOCK_BOUNCE is not set
 CONFIG_MMC_SDHI=y
@@ -114,7 +119,7 @@ CONFIG_SH_DMAE=y
 CONFIG_ASYNC_TX_DMA=y
 CONFIG_STAGING=y
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
+CONFIG_INOTIFY_USER=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set

arch/arm/mach-shmobile/board-kzm9g.c

@@ -30,8 +30,11 @@
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
 #include <linux/smsc911x.h>
 #include <linux/usb/r8a66597.h>
+#include <linux/usb/renesas_usbhs.h>
 #include <linux/videodev2.h>
 #include <sound/sh_fsi.h>
 #include <sound/simple_card.h>
@@ -56,6 +59,12 @@
 #define GPIO_PCF8575_PORT15	(GPIO_NR + 13)
 #define GPIO_PCF8575_PORT16	(GPIO_NR + 14)
 
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
 /*
  * FSI-AK4648
  *
@@ -122,6 +131,151 @@ static struct platform_device usb_host_device = {
 	.resource	= usb_resources,
 };
 
+/* USB Func CN17 */
+struct usbhs_private {
+	unsigned int phy;
+	unsigned int cr2;
+	struct renesas_usbhs_platform_info info;
+};
+
+#define IRQ15			intcs_evt2irq(0x03e0)
+#define USB_PHY_MODE		(1 << 4)
+#define USB_PHY_INT_EN		((1 << 3) | (1 << 2))
+#define USB_PHY_ON		(1 << 1)
+#define USB_PHY_OFF		(1 << 0)
+#define USB_PHY_INT_CLR		(USB_PHY_ON | USB_PHY_OFF)
+
+#define usbhs_get_priv(pdev) \
+	container_of(renesas_usbhs_get_info(pdev), struct usbhs_private, info)
+
+static int usbhs_get_vbus(struct platform_device *pdev)
+{
+	struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+	return !((1 << 7) & __raw_readw(priv->cr2));
+}
+
+static void usbhs_phy_reset(struct platform_device *pdev)
+{
+	struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+	/* init phy */
+	__raw_writew(0x8a0a, priv->cr2);
+}
+
+static int usbhs_get_id(struct platform_device *pdev)
+{
+	return USBHS_GADGET;
+}
+
+static irqreturn_t usbhs_interrupt(int irq, void *data)
+{
+	struct platform_device *pdev = data;
+	struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+	renesas_usbhs_call_notify_hotplug(pdev);
+
+	/* clear status */
+	__raw_writew(__raw_readw(priv->phy) | USB_PHY_INT_CLR, priv->phy);
+
+	return IRQ_HANDLED;
+}
+
+static int usbhs_hardware_init(struct platform_device *pdev)
+{
+	struct usbhs_private *priv = usbhs_get_priv(pdev);
+	int ret;
+
+	/* clear interrupt status */
+	__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->phy);
+
+	ret = request_irq(IRQ15, usbhs_interrupt, IRQF_TRIGGER_HIGH,
+			  dev_name(&pdev->dev), pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "request_irq err\n");
+		return ret;
+	}
+
+	/* enable USB phy interrupt */
+	__raw_writew(USB_PHY_MODE | USB_PHY_INT_EN, priv->phy);
+
+	return 0;
+}
+
+static void usbhs_hardware_exit(struct platform_device *pdev)
+{
+	struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+	/* clear interrupt status */
+	__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->phy);
+
+	free_irq(IRQ15, pdev);
+}
+
+static u32 usbhs_pipe_cfg[] = {
+	USB_ENDPOINT_XFER_CONTROL,
+	USB_ENDPOINT_XFER_ISOC,
+	USB_ENDPOINT_XFER_ISOC,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_INT,
+	USB_ENDPOINT_XFER_INT,
+	USB_ENDPOINT_XFER_INT,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+	USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usbhs_private usbhs_private = {
+	.phy	= 0xe60781e0,		/* USBPHYINT */
+	.cr2	= 0xe605810c,		/* USBCR2 */
+	.info = {
+		.platform_callback = {
+			.hardware_init	= usbhs_hardware_init,
+			.hardware_exit	= usbhs_hardware_exit,
+			.get_id		= usbhs_get_id,
+			.phy_reset	= usbhs_phy_reset,
+			.get_vbus	= usbhs_get_vbus,
+		},
+		.driver_param = {
+			.buswait_bwait	= 4,
+			.has_otg	= 1,
+			.pipe_type	= usbhs_pipe_cfg,
+			.pipe_size	= ARRAY_SIZE(usbhs_pipe_cfg),
+		},
+	},
+};
+
+static struct resource usbhs_resources[] = {
+	[0] = {
+		.start	= 0xE6890000,
+		.end	= 0xE68900e6 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_spi(62),
+		.end	= gic_spi(62),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usbhs_device = {
+	.name	= "renesas_usbhs",
+	.id	= -1,
+	.dev = {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usbhs_private.info,
+	},
+	.num_resources	= ARRAY_SIZE(usbhs_resources),
+	.resource	= usbhs_resources,
+};
+
 /* LCDC */
 static struct fb_videomode kzm_lcdc_mode = {
 	.name		= "WVGA Panel",
@@ -176,6 +330,13 @@ static struct platform_device lcdc_device = {
 	},
 };
 
+/* Fixed 1.8V regulator to be used by MMCIF */
+static struct regulator_consumer_supply fixed1v8_power_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
+};
+
 /* MMCIF */
 static struct resource sh_mmcif_resources[] = {
 	[0] = {
@@ -197,6 +358,8 @@ static struct resource sh_mmcif_resources[] = {
 static struct sh_mmcif_plat_data sh_mmcif_platdata = {
 	.ocr		= MMC_VDD_165_195,
 	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
 
 static struct platform_device mmc_device = {
@@ -210,6 +373,15 @@ static struct platform_device mmc_device = {
 	.resource	= sh_mmcif_resources,
 };
 
+/* Fixed 2.8V regulators to be used by SDHI0 and SDHI2 */
+static struct regulator_consumer_supply fixed2v8_power_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.2"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.2"),
+};
+
 /* SDHI */
 static struct sh_mobile_sdhi_info sdhi0_info = {
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
@@ -250,6 +422,50 @@ static struct platform_device sdhi0_device = {
 	},
 };
 
+/* Micro SD */
+static struct sh_mobile_sdhi_info sdhi2_info = {
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT |
+			  TMIO_MMC_USE_GPIO_CD |
+			  TMIO_MMC_WRPROTECT_DISABLE,
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED,
+	.tmio_ocr_mask	= MMC_VDD_27_28 | MMC_VDD_28_29,
+	.cd_gpio	= GPIO_PORT13,
+};
+
+static struct resource sdhi2_resources[] = {
+	[0] = {
+		.name	= "SDHI2",
+		.start	= 0xee140000,
+		.end	= 0xee1400ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= SH_MOBILE_SDHI_IRQ_CARD_DETECT,
+		.start	= gic_spi(103),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
+		.start	= gic_spi(104),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
+		.start	= gic_spi(105),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi2_device = {
+	.name		= "sh_mobile_sdhi",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(sdhi2_resources),
+	.resource	= sdhi2_resources,
+	.dev	= {
+		.platform_data	= &sdhi2_info,
+	},
+};
+
 /* KEY */
 #define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
 
@@ -280,6 +496,7 @@ static struct platform_device gpio_keys_device = {
 /* FSI-AK4648 */
 static struct sh_fsi_platform_info fsi_info = {
 	.port_a = {
+		.tx_id = SHDMA_SLAVE_FSI2A_TX,
 	},
 };
 
@@ -361,9 +578,11 @@ static struct i2c_board_info i2c3_devices[] = {
 static struct platform_device *kzm_devices[] __initdata = {
 	&smsc_device,
 	&usb_host_device,
+	&usbhs_device,
 	&lcdc_device,
 	&mmc_device,
 	&sdhi0_device,
+	&sdhi2_device,
 	&gpio_keys_device,
 	&fsi_device,
 	&fsi_ak4648_device,
@@ -424,6 +643,12 @@ device_initcall(as3711_enable_lcdc_backlight);
 
 static void __init kzm_init(void)
 {
+	regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
+				     ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
+	regulator_register_always_on(1, "fixed-2.8V", fixed2v8_power_consumers,
+				     ARRAY_SIZE(fixed2v8_power_consumers), 2800000);
+	regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
 	sh73a0_pinmux_init();
 
 	/* enable SCIFA4 */
@@ -501,6 +726,16 @@ static void __init kzm_init(void)
 	gpio_request(GPIO_PORT15, NULL);
 	gpio_direction_output(GPIO_PORT15, 1); /* power */
 
+	/* enable Micro SD */
+	gpio_request(GPIO_FN_SDHID2_0,		NULL);
+	gpio_request(GPIO_FN_SDHID2_1,		NULL);
+	gpio_request(GPIO_FN_SDHID2_2,		NULL);
+	gpio_request(GPIO_FN_SDHID2_3,		NULL);
+	gpio_request(GPIO_FN_SDHICMD2,		NULL);
+	gpio_request(GPIO_FN_SDHICLK2,		NULL);
+	gpio_request(GPIO_PORT14, NULL);
+	gpio_direction_output(GPIO_PORT14, 1); /* power */
+
 	/* I2C 3 */
 	gpio_request(GPIO_FN_PORT27_I2C_SCL3, NULL);
 	gpio_request(GPIO_FN_PORT28_I2C_SDA3, NULL);
@@ -512,6 +747,9 @@ static void __init kzm_init(void)
 	gpio_request(GPIO_FN_FSIAISLD,	NULL);
 	gpio_request(GPIO_FN_FSIAOSLD,	NULL);
 
+	/* enable USB */
+	gpio_request(GPIO_FN_VBUS_0,	NULL);
+
 #ifdef CONFIG_CACHE_L2X0
 	/* Early BRESP enable, Shared attribute override enable, 64K*8way */
 	l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff);