Merge ../linux-2.6

CREDITS

@@ -1194,15 +1194,9 @@ S: Brecksville, OH  44141-1334
 S: USA
 
 N: Tristan Greaves
-E: Tristan.Greaves@icl.com
-E: tmg296@ecs.soton.ac.uk
-W: http://www.ecs.soton.ac.uk/~tmg296
+E: tristan@extricate.org
+W: http://www.extricate.org/
 D: Miscellaneous ipv4 sysctl patches
-S: 15 Little Mead
-S: Denmead
-S: Hampshire
-S: PO7 6HS
-S: United Kingdom
 
 N: Michael A. Griffith
 E: grif@cs.ucr.edu

Documentation/power/video.txt

@@ -140,7 +140,7 @@ IBM TP T41p			s3_bios (2), switch to X after resume
 IBM TP T42			s3_bios (2)
 IBM ThinkPad T42p (2373-GTG)	s3_bios (2)
 IBM TP X20			??? (*)
-IBM TP X30			s3_bios (2)
+IBM TP X30			s3_bios, s3_mode (4)
 IBM TP X31 / Type 2672-XXH      none (1), use radeontool (http://fdd.com/software/radeon/) to turn off backlight.
 IBM TP X32			none (1), but backlight is on and video is trashed after long suspend. s3_bios,s3_mode (4) works too. Perhaps that gets better results?
 IBM Thinkpad X40 Type 2371-7JG  s3_bios,s3_mode (4)

Documentation/sound/alsa/Audiophile-Usb.txt

@@ -1,4 +1,4 @@
-	Guide to using M-Audio Audiophile USB with ALSA and Jack	v1.2
+	Guide to using M-Audio Audiophile USB with ALSA and Jack	v1.3
 	========================================================
 
 	    Thibault Le Meur <Thibault.LeMeur@supelec.fr>
@@ -22,16 +22,16 @@ The device has 4 audio interfaces, and 2 MIDI ports:
  * Midi In (Mi)
  * Midi Out (Mo)
 
-The internal DAC/ADC has the following caracteristics:
+The internal DAC/ADC has the following characteristics:
 * sample depth of 16 or 24 bits
 * sample rate from 8kHz to 96kHz
-* Two ports can't use different sample depths at the same time.Moreover, the 
+* Two ports can't use different sample depths at the same time. Moreover, the 
 Audiophile USB documentation gives the following Warning: "Please exit any 
 audio application running before switching between bit depths"
 
 Due to the USB 1.1 bandwidth limitation, a limited number of interfaces can be 
 activated at the same time depending on the audio mode selected:
- * 16-bit/48kHz ==> 4 channels in/ 4 channels out
+ * 16-bit/48kHz ==> 4 channels in/4 channels out
    - Ai+Ao+Di+Do
  * 24-bit/48kHz ==> 4 channels in/2 channels out, 
                     or 2 channels in/4 channels out
@@ -41,8 +41,8 @@ activated at the same time depending on the audio mode selected:
 
 Important facts about the Digital interface:
 --------------------------------------------
- * The Do port additionnaly supports surround-encoded AC-3 and DTS passthrough, 
-though I haven't tested it under linux
+ * The Do port additionally supports surround-encoded AC-3 and DTS passthrough, 
+though I haven't tested it under Linux
    - Note that in this setup only the Do interface can be enabled
  * Apart from recording an audio digital stream, enabling the Di port is a way 
 to synchronize the device to an external sample clock
@@ -60,24 +60,23 @@ synchronization error (for instance sound played at an odd sample rate)
 The Audiophile USB MIDI ports will be automatically supported once the 
 following modules have been loaded:
  * snd-usb-audio
- * snd-seq
  * snd-seq-midi
 
-No additionnal setting is required.
+No additional setting is required.
 
 2.2 - Audio ports
 -----------------
 
 Audio functions of the Audiophile USB device are handled by the snd-usb-audio 
 module. This module can work in a default mode (without any device-specific 
-parameter), or in an advanced mode with the device-specific parameter called 
+parameter), or in an "advanced" mode with the device-specific parameter called 
 "device_setup".
 
 2.2.1 - Default Alsa driver mode
 
-The default behaviour of the snd-usb-audio driver is to parse the device 
+The default behavior of the snd-usb-audio driver is to parse the device 
 capabilities at startup and enable all functions inside the device (including 
-all ports at any sample rates and any sample depths supported). This approach 
+all ports at any supported sample rates and sample depths). This approach 
 has the advantage to let the driver easily switch from sample rates/depths 
 automatically according to the need of the application claiming the device.
 
@@ -114,9 +113,9 @@ gain).
 For people having this problem, the snd-usb-audio module has a new module 
 parameter called "device_setup".
 
-2.2.2.1 - Initializing the working mode of the Audiohile USB
+2.2.2.1 - Initializing the working mode of the Audiophile USB
 
-As far as the Audiohile USB device is concerned, this value let the user 
+As far as the Audiophile USB device is concerned, this value let the user 
 specify:
  * the sample depth
  * the sample rate
@@ -174,20 +173,20 @@ The parameter can be given:
 
 IMPORTANT NOTE WHEN SWITCHING CONFIGURATION:
 -------------------------------------------
- * You may need to _first_ intialize the module with the correct device_setup 
+ * You may need to _first_ initialize the module with the correct device_setup 
    parameter and _only_after_ turn on the Audiophile USB device
  * This is especially true when switching the sample depth:
-   - first trun off the device
-   - de-register the snd-usb-audio module
-   - change the device_setup parameter (by either manually reprobing the module 
-     or changing modprobe.conf)
+   - first turn off the device
+   - de-register the snd-usb-audio module (modprobe -r)
+   - change the device_setup parameter by changing the device_setup
+     option in /etc/modprobe.conf 
    - turn on the device
 
 2.2.2.3 - Audiophile USB's device_setup structure
 
 If you want to understand the device_setup magic numbers for the Audiophile 
 USB, you need some very basic understanding of binary computation. However, 
-this is not required to use the parameter and you may skip thi section.
+this is not required to use the parameter and you may skip this section.
 
 The device_setup is one byte long and its structure is the following:
 
@@ -231,11 +230,11 @@ Caution:
 
 2.2.3 -  USB implementation details for this device
 
-You may safely skip this section if you're not interrested in driver 
+You may safely skip this section if you're not interested in driver 
 development.
 
-This section describes some internals aspect of the device and summarize the 
-data I got by usb-snooping the windows and linux drivers.
+This section describes some internal aspects of the device and summarize the 
+data I got by usb-snooping the windows and Linux drivers.
 
 The M-Audio Audiophile USB has 7 USB Interfaces:
 a "USB interface":
@@ -277,9 +276,9 @@ Here is a short description of the AltSettings capabilities:
   - 16-bit depth, 8-48kHz sample mode
   - Synch playback (Do), audio format type III IEC1937_AC-3
 
-In order to ensure a correct intialization of the device, the driver 
+In order to ensure a correct initialization of the device, the driver 
 _must_know_ how the device will be used:
- * if DTS is choosen, only Interface 2 with AltSet nb.6 must be
+ * if DTS is chosen, only Interface 2 with AltSet nb.6 must be
    registered
  * if 96KHz only AltSets nb.1 of each interface must be selected
  * if samples are using 24bits/48KHz then AltSet 2 must me used if
@@ -290,7 +289,7 @@ _must_know_ how the device will be used:
    is not connected
 
 When device_setup is given as a parameter to the snd-usb-audio module, the 
-parse_audio_enpoint function uses a quirk called 
+parse_audio_endpoints function uses a quirk called 
 "audiophile_skip_setting_quirk" in order to prevent AltSettings not 
 corresponding to device_setup from being registered in the driver.
 
@@ -317,9 +316,8 @@ However you may see the following warning message:
 using the "default" ALSA device. This is less efficient than it could be. 
 Consider using a hardware device instead rather than using the plug layer."
 
-
 3.2 - Patching alsa to use direct pcm device
--------------------------------------------
+--------------------------------------------
 A patch for Jack by Andreas Steinmetz adds support for Big Endian devices. 
 However it has not been included in the CVS tree.
 
@@ -331,3 +329,32 @@ After having applied the patch you can run jackd with the following command
 line:
   % jackd -R -dalsa -Phw:1,0 -r48000 -p128 -n2 -D -Chw:1,1
 
+3.2 - Getting 2 input and/or output interfaces in Jack
+------------------------------------------------------
+
+As you can see, starting the Jack server this way will only enable 1 stereo
+input (Di or Ai) and 1 stereo output (Ao or Do).
+
+This is due to the following restrictions:
+* Jack can only open one capture device and one playback device at a time
+* The Audiophile USB is seen as 2 (or three) Alsa devices: hw:1,0, hw:1,1
+  (and optionally hw:1,2)
+If you want to get Ai+Di and/or Ao+Do support with Jack, you would need to
+combine the Alsa devices into one logical "complex" device.
+
+If you want to give it a try, I recommend reading the information from
+this page: http://www.sound-man.co.uk/linuxaudio/ice1712multi.html
+It is related to another device (ice1712) but can be adapted to suit
+the Audiophile USB.
+
+Enabling multiple Audiophile USB interfaces for Jackd will certainly require:
+* patching Jack with the previously mentioned "Big Endian" patch
+* patching Jackd with the MMAP_COMPLEX patch (see the ice1712 page)
+* patching the alsa-lib/src/pcm/pcm_multi.c file (see the ice1712 page)
+* define a multi device (combination of hw:1,0 and hw:1,1) in your .asoundrc
+  file 
+* start jackd with this device
+
+I had no success in testing this for now, but this may be due to my OS
+configuration. If you have any success with this kind of setup, please
+drop me an email.

Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl

@@ -1172,7 +1172,7 @@
   }        
 
   /* PCI IDs */
-  static struct pci_device_id snd_mychip_ids[] = {
+  static struct pci_device_id snd_mychip_ids[] __devinitdata = {
           { PCI_VENDOR_ID_FOO, PCI_DEVICE_ID_BAR,
             PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
           ....
@@ -1565,7 +1565,7 @@
         <informalexample>
           <programlisting>
 <![CDATA[
-  static struct pci_device_id snd_mychip_ids[] = {
+  static struct pci_device_id snd_mychip_ids[] __devinitdata = {
           { PCI_VENDOR_ID_FOO, PCI_DEVICE_ID_BAR,
             PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
           ....

arch/arm/Kconfig

@@ -150,8 +150,6 @@ config ARCH_IOP3XX
 
 config ARCH_IXP4XX
 	bool "IXP4xx-based"
-	select DMABOUNCE
-	select PCI
 	help
 	  Support for Intel's IXP4XX (XScale) family of processors.
 

arch/arm/boot/compressed/misc.c

@@ -38,10 +38,10 @@ static void icedcc_putc(int ch)
 		if (--i < 0)
 			return;
 
-		asm("mrc p14, 0, %0, c0, c0, 0" : "=r" (status));
+		asm volatile ("mrc p14, 0, %0, c0, c0, 0" : "=r" (status));
 	} while (status & 2);
 
-	asm("mcr p15, 0, %0, c1, c0, 0" : : "r" (ch));
+	asm("mcr p14, 0, %0, c1, c0, 0" : : "r" (ch));
 }
 
 #define putc(ch)	icedcc_putc(ch)

arch/arm/mach-imx/generic.c

@@ -195,56 +195,6 @@ void __init imx_set_mmc_info(struct imxmmc_platform_data *info)
 }
 EXPORT_SYMBOL(imx_set_mmc_info);
 
-static struct resource imx_uart1_resources[] = {
-	[0] = {
-		.start	= 0x00206000,
-		.end	= 0x002060FF,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= (UART1_MINT_RX),
-		.end	= (UART1_MINT_RX),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= (UART1_MINT_TX),
-		.end	= (UART1_MINT_TX),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device imx_uart1_device = {
-	.name		= "imx-uart",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(imx_uart1_resources),
-	.resource	= imx_uart1_resources,
-};
-
-static struct resource imx_uart2_resources[] = {
-	[0] = {
-		.start	= 0x00207000,
-		.end	= 0x002070FF,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= (UART2_MINT_RX),
-		.end	= (UART2_MINT_RX),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= (UART2_MINT_TX),
-		.end	= (UART2_MINT_TX),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device imx_uart2_device = {
-	.name		= "imx-uart",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(imx_uart2_resources),
-	.resource	= imx_uart2_resources,
-};
-
 static struct imxfb_mach_info imx_fb_info;
 
 void __init set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info)
@@ -283,8 +233,6 @@ static struct platform_device imxfb_device = {
 static struct platform_device *devices[] __initdata = {
 	&imx_mmc_device,
 	&imxfb_device,
-	&imx_uart1_device,
-	&imx_uart2_device,
 };
 
 static struct map_desc imx_io_desc[] __initdata = {

arch/arm/mach-imx/mx1ads.c

@@ -26,6 +26,7 @@
 
 #include <asm/mach/arch.h>
 #include <asm/arch/mmc.h>
+#include <asm/arch/imx-uart.h>
 #include <linux/interrupt.h>
 #include "generic.h"
 
@@ -48,8 +49,70 @@ static struct platform_device cs89x0_device = {
 	.resource	= cs89x0_resources,
 };
 
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct resource imx_uart1_resources[] = {
+	[0] = {
+		.start	= 0x00206000,
+		.end	= 0x002060FF,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= (UART1_MINT_RX),
+		.end	= (UART1_MINT_RX),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= (UART1_MINT_TX),
+		.end	= (UART1_MINT_TX),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device imx_uart1_device = {
+	.name		= "imx-uart",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(imx_uart1_resources),
+	.resource	= imx_uart1_resources,
+	.dev = {
+		.platform_data = &uart_pdata,
+	}
+};
+
+static struct resource imx_uart2_resources[] = {
+	[0] = {
+		.start	= 0x00207000,
+		.end	= 0x002070FF,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= (UART2_MINT_RX),
+		.end	= (UART2_MINT_RX),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= (UART2_MINT_TX),
+		.end	= (UART2_MINT_TX),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device imx_uart2_device = {
+	.name		= "imx-uart",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(imx_uart2_resources),
+	.resource	= imx_uart2_resources,
+	.dev = {
+		.platform_data = &uart_pdata,
+	}
+};
+
 static struct platform_device *devices[] __initdata = {
 	&cs89x0_device,
+	&imx_uart1_device,
+	&imx_uart2_device,
 };
 
 #ifdef CONFIG_MMC_IMX
@@ -75,6 +138,17 @@ mx1ads_init(void)
 	imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20);
 	imx_set_mmc_info(&mx1ads_mmc_info);
 #endif
+
+	imx_gpio_mode(PC9_PF_UART1_CTS);
+	imx_gpio_mode(PC10_PF_UART1_RTS);
+	imx_gpio_mode(PC11_PF_UART1_TXD);
+	imx_gpio_mode(PC12_PF_UART1_RXD);
+
+	imx_gpio_mode(PB28_PF_UART2_CTS);
+	imx_gpio_mode(PB29_PF_UART2_RTS);
+	imx_gpio_mode(PB30_PF_UART2_TXD);
+	imx_gpio_mode(PB31_PF_UART2_RXD);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 

arch/arm/mach-ixp4xx/Kconfig

@@ -11,6 +11,7 @@ comment "IXP4xx Platforms"
 config MACH_NSLU2
 	bool
 	prompt "Linksys NSLU2"
+	select PCI
 	help
 	  Say 'Y' here if you want your kernel to support Linksys's
 	  NSLU2 NAS device. For more information on this platform,
@@ -18,6 +19,7 @@ config MACH_NSLU2
 
 config ARCH_AVILA
 	bool "Avila"
+	select PCI
 	help
 	  Say 'Y' here if you want your kernel to support the Gateworks
 	  Avila Network Platform. For more information on this platform,
@@ -25,6 +27,7 @@ config ARCH_AVILA
 
 config ARCH_ADI_COYOTE
 	bool "Coyote"
+	select PCI
 	help
 	  Say 'Y' here if you want your kernel to support the ADI 
 	  Engineering Coyote Gateway Reference Platform. For more
@@ -32,6 +35,7 @@ config ARCH_ADI_COYOTE
 
 config ARCH_IXDP425
 	bool "IXDP425"
+	select PCI
 	help
 	  Say 'Y' here if you want your kernel to support Intel's 
 	  IXDP425 Development Platform (Also known as Richfield).  
@@ -39,6 +43,7 @@ config ARCH_IXDP425
 
 config MACH_IXDPG425
 	bool "IXDPG425"
+	select PCI
 	help
 	  Say 'Y' here if you want your kernel to support Intel's
 	  IXDPG425 Development Platform (Also known as Montajade).
@@ -46,6 +51,7 @@ config MACH_IXDPG425
 
 config MACH_IXDP465
 	bool "IXDP465"
+	select PCI
 	help
 	  Say 'Y' here if you want your kernel to support Intel's
 	  IXDP465 Development Platform (Also known as BMP).
@@ -72,6 +78,7 @@ config ARCH_PRPMC1100
 config MACH_NAS100D
 	bool
 	prompt "NAS100D"
+	select PCI
 	help
 	  Say 'Y' here if you want your kernel to support Iomega's
 	  NAS 100d device. For more information on this platform,
@@ -96,6 +103,7 @@ config CPU_IXP46X
 config MACH_GTWX5715
 	bool "Gemtek WX5715 (Linksys WRV54G)"
 	depends on ARCH_IXP4XX
+	select PCI
 	help
 		This board is currently inside the Linksys WRV54G Gateways.
 
@@ -110,11 +118,16 @@ config MACH_GTWX5715
 		"High Speed" UART is n/c (as far as I can tell)
 		20 Pin ARM/Xscale JTAG interface on J2
 
-
 comment "IXP4xx Options"
 
+config DMABOUNCE
+	bool
+	default y
+	depends on PCI
+
 config IXP4XX_INDIRECT_PCI
 	bool "Use indirect PCI memory access"
+	depends on PCI
 	help
           IXP4xx provides two methods of accessing PCI memory space:
 

arch/arm/mach-ixp4xx/Makefile

@@ -2,8 +2,9 @@
 # Makefile for the linux kernel.
 #
 
-obj-y	+= common.o common-pci.o 
+obj-y	+= common.o
 
+obj-$(CONFIG_PCI)		+= common-pci.o
 obj-$(CONFIG_ARCH_IXDP4XX)	+= ixdp425-pci.o ixdp425-setup.o
 obj-$(CONFIG_MACH_IXDPG425)	+= ixdpg425-pci.o coyote-setup.o
 obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o coyote-setup.o

arch/i386/Kconfig

@@ -467,7 +467,7 @@ endchoice
 
 choice
 	depends on EXPERIMENTAL && !X86_PAE
-	prompt "Memory split"
+	prompt "Memory split" if EMBEDDED
 	default VMSPLIT_3G
 	help
 	  Select the desired split between kernel and user memory.
@@ -756,7 +756,7 @@ config PHYSICAL_START
 
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
-	depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER && !X86_PC
+	depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER
 	---help---
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
 	  can be controlled through /sys/devices/system/cpu.

arch/i386/kernel/acpi/boot.c

@@ -215,7 +215,7 @@ static int __init acpi_parse_madt(unsigned long phys_addr, unsigned long size)
 {
 	struct acpi_table_madt *madt = NULL;
 
-	if (!phys_addr || !size || !cpu_has_apic)
+	if (!phys_addr || !size)
 		return -EINVAL;
 
 	madt = (struct acpi_table_madt *)__acpi_map_table(phys_addr, size);
@@ -1102,9 +1102,6 @@ int __init acpi_boot_table_init(void)
 	dmi_check_system(acpi_dmi_table);
 #endif
 
-	if (!cpu_has_apic)
-		return -ENODEV;
-
 	/*
 	 * If acpi_disabled, bail out
 	 * One exception: acpi=ht continues far enough to enumerate LAPICs

arch/i386/kernel/apic.c

@@ -757,10 +757,6 @@ static int __init apic_set_verbosity(char *str)
 		apic_verbosity = APIC_DEBUG;
 	else if (strcmp("verbose", str) == 0)
 		apic_verbosity = APIC_VERBOSE;
-	else
-		printk(KERN_WARNING "APIC Verbosity level %s not recognised"
-				" use apic=verbose or apic=debug\n", str);
-
 	return 1;
 }
 

arch/i386/kernel/kprobes.c

@@ -242,10 +242,6 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 			kcb->kprobe_status = KPROBE_REENTER;
 			return 1;
 		} else {
-			if (regs->eflags & VM_MASK) {
-			/* We are in virtual-8086 mode. Return 0 */
-				goto no_kprobe;
-			}
 			if (*addr != BREAKPOINT_INSTRUCTION) {
 			/* The breakpoint instruction was removed by
 			 * another cpu right after we hit, no further
@@ -265,11 +261,6 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 
 	p = get_kprobe(addr);
 	if (!p) {
-		if (regs->eflags & VM_MASK) {
-			/* We are in virtual-8086 mode. Return 0 */
-			goto no_kprobe;
-		}
-
 		if (*addr != BREAKPOINT_INSTRUCTION) {
 			/*
 			 * The breakpoint instruction was removed right
@@ -452,10 +443,11 @@ static void __kprobes resume_execution(struct kprobe *p,
 		*tos &= ~(TF_MASK | IF_MASK);
 		*tos |= kcb->kprobe_old_eflags;
 		break;
-	case 0xc3:		/* ret/lret */
-	case 0xcb:
-	case 0xc2:
+	case 0xc2:		/* iret/ret/lret */
+	case 0xc3:
 	case 0xca:
+	case 0xcb:
+	case 0xcf:
 	case 0xea:		/* jmp absolute -- eip is correct */
 		/* eip is already adjusted, no more changes required */
 		p->ainsn.boostable = 1;
@@ -463,10 +455,13 @@ static void __kprobes resume_execution(struct kprobe *p,
 	case 0xe8:		/* call relative - Fix return addr */
 		*tos = orig_eip + (*tos - copy_eip);
 		break;
+	case 0x9a:		/* call absolute -- same as call absolute, indirect */
+		*tos = orig_eip + (*tos - copy_eip);
+		goto no_change;
 	case 0xff:
 		if ((p->ainsn.insn[1] & 0x30) == 0x10) {
-			/* call absolute, indirect */
 			/*
+			 * call absolute, indirect
 			 * Fix return addr; eip is correct.
 			 * But this is not boostable
 			 */

arch/i386/kernel/ptrace.c

@@ -671,7 +671,7 @@ int do_syscall_trace(struct pt_regs *regs, int entryexit)
 
 	if (unlikely(current->audit_context)) {
 		if (entryexit)
-			audit_syscall_exit(current, AUDITSC_RESULT(regs->eax),
+			audit_syscall_exit(AUDITSC_RESULT(regs->eax),
 						regs->eax);
 		/* Debug traps, when using PTRACE_SINGLESTEP, must be sent only
 		 * on the syscall exit path. Normally, when TIF_SYSCALL_AUDIT is
@@ -720,14 +720,13 @@ int do_syscall_trace(struct pt_regs *regs, int entryexit)
 	ret = is_sysemu;
 out:
 	if (unlikely(current->audit_context) && !entryexit)
-		audit_syscall_entry(current, AUDIT_ARCH_I386, regs->orig_eax,
+		audit_syscall_entry(AUDIT_ARCH_I386, regs->orig_eax,
 				    regs->ebx, regs->ecx, regs->edx, regs->esi);
 	if (ret == 0)
 		return 0;
 
 	regs->orig_eax = -1; /* force skip of syscall restarting */
 	if (unlikely(current->audit_context))
-		audit_syscall_exit(current, AUDITSC_RESULT(regs->eax),
-				regs->eax);
+		audit_syscall_exit(AUDITSC_RESULT(regs->eax), regs->eax);
 	return 1;
 }

arch/i386/kernel/setup.c

@@ -970,8 +970,10 @@ efi_memory_present_wrapper(unsigned long start, unsigned long end, void *arg)
   * not-overlapping, which is the case
   */
 int __init
-e820_all_mapped(unsigned long start, unsigned long end, unsigned type)
+e820_all_mapped(unsigned long s, unsigned long e, unsigned type)
 {
+	u64 start = s;
+	u64 end = e;
 	int i;
 	for (i = 0; i < e820.nr_map; i++) {
 		struct e820entry *ei = &e820.map[i];

arch/i386/kernel/smpboot.c

@@ -313,7 +313,9 @@ static void __init synchronize_tsc_bp (void)
 			if (tsc_values[i] < avg)
 				realdelta = -realdelta;
 
-			printk(KERN_INFO "CPU#%d had %ld usecs TSC skew, fixed it up.\n", i, realdelta);
+			if (realdelta > 0)
+				printk(KERN_INFO "CPU#%d had %ld usecs TSC "
+					"skew, fixed it up.\n", i, realdelta);
 		}
 
 		sum += delta;

arch/i386/kernel/timers/timer_tsc.c

@@ -279,7 +279,7 @@ time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
 {
 	struct cpufreq_freqs *freq = data;
 
-	if (val != CPUFREQ_RESUMECHANGE)
+	if (val != CPUFREQ_RESUMECHANGE && val != CPUFREQ_SUSPENDCHANGE)
 		write_seqlock_irq(&xtime_lock);
 	if (!ref_freq) {
 		if (!freq->old){
@@ -312,7 +312,7 @@ time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
 	}
 
 end:
-	if (val != CPUFREQ_RESUMECHANGE)
+	if (val != CPUFREQ_RESUMECHANGE && val != CPUFREQ_SUSPENDCHANGE)
 		write_sequnlock_irq(&xtime_lock);
 
 	return 0;

arch/i386/kernel/vm86.c

@@ -312,7 +312,7 @@ static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk
 
 	/*call audit_syscall_exit since we do not exit via the normal paths */
 	if (unlikely(current->audit_context))
-		audit_syscall_exit(current, AUDITSC_RESULT(eax), eax);
+		audit_syscall_exit(AUDITSC_RESULT(eax), eax);
 
 	__asm__ __volatile__(
 		"movl %0,%%esp\n\t"

arch/ia64/kernel/ptrace.c

@@ -1644,7 +1644,7 @@ syscall_trace_enter (long arg0, long arg1, long arg2, long arg3,
 			arch = AUDIT_ARCH_IA64;
 		}
 
-		audit_syscall_entry(current, arch, syscall, arg0, arg1, arg2, arg3);
+		audit_syscall_entry(arch, syscall, arg0, arg1, arg2, arg3);
 	}
 
 }
@@ -1662,7 +1662,7 @@ syscall_trace_leave (long arg0, long arg1, long arg2, long arg3,
 
 		if (success != AUDITSC_SUCCESS)
 			result = -result;
-		audit_syscall_exit(current, success, result);
+		audit_syscall_exit(success, result);
 	}
 
 	if (test_thread_flag(TIF_SYSCALL_TRACE)

arch/mips/kernel/ptrace.c

@@ -483,7 +483,7 @@ static inline int audit_arch(void)
 asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
 {
 	if (unlikely(current->audit_context) && entryexit)
-		audit_syscall_exit(current, AUDITSC_RESULT(regs->regs[2]),
+		audit_syscall_exit(AUDITSC_RESULT(regs->regs[2]),
 		                   regs->regs[2]);
 
 	if (!(current->ptrace & PT_PTRACED))
@@ -507,7 +507,7 @@ asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
 	}
  out:
 	if (unlikely(current->audit_context) && !entryexit)
-		audit_syscall_entry(current, audit_arch(), regs->regs[2],
+		audit_syscall_entry(audit_arch(), regs->regs[2],
 				    regs->regs[4], regs->regs[5],
 				    regs->regs[6], regs->regs[7]);
 }

arch/powerpc/kernel/kprobes.c

@@ -90,15 +90,15 @@ void __kprobes arch_remove_kprobe(struct kprobe *p)
 
 static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
 {
-	kprobe_opcode_t insn = *p->ainsn.insn;
-
 	regs->msr |= MSR_SE;
 
-	/* single step inline if it is a trap variant */
-	if (is_trap(insn))
-		regs->nip = (unsigned long)p->addr;
-	else
-		regs->nip = (unsigned long)p->ainsn.insn;
+	/*
+	 * On powerpc we should single step on the original
+	 * instruction even if the probed insn is a trap
+	 * variant as values in regs could play a part in
+	 * if the trap is taken or not
+	 */
+	regs->nip = (unsigned long)p->ainsn.insn;
 }
 
 static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)

arch/powerpc/kernel/prom.c

@@ -885,6 +885,74 @@ void __init unflatten_device_tree(void)
 	DBG(" <- unflatten_device_tree()\n");
 }
 
+/*
+ * ibm,pa-features is a per-cpu property that contains a string of
+ * attribute descriptors, each of which has a 2 byte header plus up
+ * to 254 bytes worth of processor attribute bits.  First header
+ * byte specifies the number of bytes following the header.
+ * Second header byte is an "attribute-specifier" type, of which
+ * zero is the only currently-defined value.
+ * Implementation:  Pass in the byte and bit offset for the feature
+ * that we are interested in.  The function will return -1 if the
+ * pa-features property is missing, or a 1/0 to indicate if the feature
+ * is supported/not supported.  Note that the bit numbers are
+ * big-endian to match the definition in PAPR.
+ */
+static struct ibm_pa_feature {
+	unsigned long	cpu_features;	/* CPU_FTR_xxx bit */
+	unsigned int	cpu_user_ftrs;	/* PPC_FEATURE_xxx bit */
+	unsigned char	pabyte;		/* byte number in ibm,pa-features */
+	unsigned char	pabit;		/* bit number (big-endian) */
+	unsigned char	invert;		/* if 1, pa bit set => clear feature */
+} ibm_pa_features[] __initdata = {
+	{0, PPC_FEATURE_HAS_MMU,	0, 0, 0},
+	{0, PPC_FEATURE_HAS_FPU,	0, 1, 0},
+	{CPU_FTR_SLB, 0,		0, 2, 0},
+	{CPU_FTR_CTRL, 0,		0, 3, 0},
+	{CPU_FTR_NOEXECUTE, 0,		0, 6, 0},
+	{CPU_FTR_NODSISRALIGN, 0,	1, 1, 1},
+	{CPU_FTR_CI_LARGE_PAGE, 0,	1, 2, 0},
+};
+
+static void __init check_cpu_pa_features(unsigned long node)
+{
+	unsigned char *pa_ftrs;
+	unsigned long len, tablelen, i, bit;
+
+	pa_ftrs = of_get_flat_dt_prop(node, "ibm,pa-features", &tablelen);
+	if (pa_ftrs == NULL)
+		return;
+
+	/* find descriptor with type == 0 */
+	for (;;) {
+		if (tablelen < 3)
+			return;
+		len = 2 + pa_ftrs[0];
+		if (tablelen < len)
+			return;		/* descriptor 0 not found */
+		if (pa_ftrs[1] == 0)
+			break;
+		tablelen -= len;
+		pa_ftrs += len;
+	}
+
+	/* loop over bits we know about */
+	for (i = 0; i < ARRAY_SIZE(ibm_pa_features); ++i) {
+		struct ibm_pa_feature *fp = &ibm_pa_features[i];
+
+		if (fp->pabyte >= pa_ftrs[0])
+			continue;
+		bit = (pa_ftrs[2 + fp->pabyte] >> (7 - fp->pabit)) & 1;
+		if (bit ^ fp->invert) {
+			cur_cpu_spec->cpu_features |= fp->cpu_features;
+			cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftrs;
+		} else {
+			cur_cpu_spec->cpu_features &= ~fp->cpu_features;
+			cur_cpu_spec->cpu_user_features &= ~fp->cpu_user_ftrs;
+		}
+	}
+}
+
 static int __init early_init_dt_scan_cpus(unsigned long node,
 					  const char *uname, int depth,
 					  void *data)
@@ -969,6 +1037,8 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
 	}
 #endif /* CONFIG_ALTIVEC */
 
+	check_cpu_pa_features(node);
+
 #ifdef CONFIG_PPC_PSERIES
 	if (nthreads > 1)
 		cur_cpu_spec->cpu_features |= CPU_FTR_SMT;

arch/powerpc/kernel/ptrace.c

@@ -538,7 +538,7 @@ void do_syscall_trace_enter(struct pt_regs *regs)
 		do_syscall_trace();
 
 	if (unlikely(current->audit_context))
-		audit_syscall_entry(current,
+		audit_syscall_entry(
 #ifdef CONFIG_PPC32
 				    AUDIT_ARCH_PPC,
 #else
@@ -556,8 +556,7 @@ void do_syscall_trace_leave(struct pt_regs *regs)
 #endif
 
 	if (unlikely(current->audit_context))
-		audit_syscall_exit(current,
-				   (regs->ccr&0x1000)?AUDITSC_FAILURE:AUDITSC_SUCCESS,
+		audit_syscall_exit((regs->ccr&0x1000)?AUDITSC_FAILURE:AUDITSC_SUCCESS,
 				   regs->result);
 
 	if ((test_thread_flag(TIF_SYSCALL_TRACE)

arch/powerpc/kernel/sysfs.c

@@ -322,13 +322,31 @@ static void register_nodes(void)
 		}
 	}
 }
+
+int sysfs_add_device_to_node(struct sys_device *dev, int nid)
+{
+	struct node *node = &node_devices[nid];
+	return sysfs_create_link(&node->sysdev.kobj, &dev->kobj,
+			kobject_name(&dev->kobj));
+}
+
+void sysfs_remove_device_from_node(struct sys_device *dev, int nid)
+{
+	struct node *node = &node_devices[nid];
+	sysfs_remove_link(&node->sysdev.kobj, kobject_name(&dev->kobj));
+}
+
 #else
 static void register_nodes(void)
 {
 	return;
 }
+
 #endif
 
+EXPORT_SYMBOL_GPL(sysfs_add_device_to_node);
+EXPORT_SYMBOL_GPL(sysfs_remove_device_from_node);
+
 /* Only valid if CPU is present. */
 static ssize_t show_physical_id(struct sys_device *dev, char *buf)
 {

arch/powerpc/mm/numa.c

@@ -194,7 +194,7 @@ static int *of_get_associativity(struct device_node *dev)
 /* Returns nid in the range [0..MAX_NUMNODES-1], or -1 if no useful numa
  * info is found.
  */
-static int of_node_to_nid(struct device_node *device)
+static int of_node_to_nid_single(struct device_node *device)
 {
 	int nid = -1;
 	unsigned int *tmp;
@@ -216,6 +216,28 @@ out:
 	return nid;
 }
 
+/* Walk the device tree upwards, looking for an associativity id */
+int of_node_to_nid(struct device_node *device)
+{
+	struct device_node *tmp;
+	int nid = -1;
+
+	of_node_get(device);
+	while (device) {
+		nid = of_node_to_nid_single(device);
+		if (nid != -1)
+			break;
+
+	        tmp = device;
+		device = of_get_parent(tmp);
+		of_node_put(tmp);
+	}
+	of_node_put(device);
+
+	return nid;
+}
+EXPORT_SYMBOL_GPL(of_node_to_nid);
+
 /*
  * In theory, the "ibm,associativity" property may contain multiple
  * associativity lists because a resource may be multiply connected
@@ -300,7 +322,7 @@ static int __cpuinit numa_setup_cpu(unsigned long lcpu)
 		goto out;
 	}
 
-	nid = of_node_to_nid(cpu);
+	nid = of_node_to_nid_single(cpu);
 
 	if (nid < 0 || !node_online(nid))
 		nid = any_online_node(NODE_MASK_ALL);
@@ -393,7 +415,7 @@ static int __init parse_numa_properties(void)
 
 		cpu = find_cpu_node(i);
 		BUG_ON(!cpu);
-		nid = of_node_to_nid(cpu);
+		nid = of_node_to_nid_single(cpu);
 		of_node_put(cpu);
 
 		/*
@@ -437,7 +459,7 @@ new_range:
 		 * have associativity properties.  If none, then
 		 * everything goes to default_nid.
 		 */
-		nid = of_node_to_nid(memory);
+		nid = of_node_to_nid_single(memory);
 		if (nid < 0)
 			nid = default_nid;
 		node_set_online(nid);
@@ -776,7 +798,7 @@ int hot_add_scn_to_nid(unsigned long scn_addr)
 ha_new_range:
 		start = read_n_cells(n_mem_addr_cells, &memcell_buf);
 		size = read_n_cells(n_mem_size_cells, &memcell_buf);
-		nid = of_node_to_nid(memory);
+		nid = of_node_to_nid_single(memory);
 
 		/* Domains not present at boot default to 0 */
 		if (nid < 0 || !node_online(nid))

arch/powerpc/platforms/cell/Kconfig

@@ -12,7 +12,8 @@ config SPU_FS
 
 config SPUFS_MMAP
 	bool
-	depends on SPU_FS && SPARSEMEM && !PPC_64K_PAGES
+	depends on SPU_FS && SPARSEMEM
+	select MEMORY_HOTPLUG
 	default y
 
 endmenu

arch/powerpc/platforms/cell/setup.c

@@ -29,6 +29,8 @@
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
 #include <linux/console.h>
+#include <linux/mutex.h>
+#include <linux/memory_hotplug.h>
 
 #include <asm/mmu.h>
 #include <asm/processor.h>
@@ -46,6 +48,7 @@
 #include <asm/cputable.h>
 #include <asm/ppc-pci.h>
 #include <asm/irq.h>
+#include <asm/spu.h>
 
 #include "interrupt.h"
 #include "iommu.h"
@@ -69,77 +72,6 @@ static void cell_show_cpuinfo(struct seq_file *m)
 	of_node_put(root);
 }
 
-#ifdef CONFIG_SPARSEMEM
-static int __init find_spu_node_id(struct device_node *spe)
-{
-	unsigned int *id;
-#ifdef CONFIG_NUMA
-	struct device_node *cpu;
-	cpu = spe->parent->parent;
-	id = (unsigned int *)get_property(cpu, "node-id", NULL);
-#else
-	id = NULL;
-#endif
-	return id ? *id : 0;
-}
-
-static void __init cell_spuprop_present(struct device_node *spe,
-				       const char *prop, int early)
-{
-	struct address_prop {
-		unsigned long address;
-		unsigned int len;
-	} __attribute__((packed)) *p;
-	int proplen;
-
-	unsigned long start_pfn, end_pfn, pfn;
-	int node_id;
-
-	p = (void*)get_property(spe, prop, &proplen);
-	WARN_ON(proplen != sizeof (*p));
-
-	node_id = find_spu_node_id(spe);
-
-	start_pfn = p->address >> PAGE_SHIFT;
-	end_pfn = (p->address + p->len + PAGE_SIZE - 1) >> PAGE_SHIFT;
-
-	/* We need to call memory_present *before* the call to sparse_init,
-	   but we can initialize the page structs only *after* that call.
-	   Thus, we're being called twice. */
-	if (early)
-		memory_present(node_id, start_pfn, end_pfn);
-	else {
-		/* As the pages backing SPU LS and I/O are outside the range
-		   of regular memory, their page structs were not initialized
-		   by free_area_init. Do it here instead. */
-		for (pfn = start_pfn; pfn < end_pfn; pfn++) {
-			struct page *page = pfn_to_page(pfn);
-			set_page_links(page, ZONE_DMA, node_id, pfn);
-			init_page_count(page);
-			reset_page_mapcount(page);
-			SetPageReserved(page);
-			INIT_LIST_HEAD(&page->lru);
-		}
-	}
-}
-
-static void __init cell_spumem_init(int early)
-{
-	struct device_node *node;
-	for (node = of_find_node_by_type(NULL, "spe");
-			node; node = of_find_node_by_type(node, "spe")) {
-		cell_spuprop_present(node, "local-store", early);
-		cell_spuprop_present(node, "problem", early);
-		cell_spuprop_present(node, "priv1", early);
-		cell_spuprop_present(node, "priv2", early);
-	}
-}
-#else
-static void __init cell_spumem_init(int early)
-{
-}
-#endif
-
 static void cell_progress(char *s, unsigned short hex)
 {
 	printk("*** %04x : %s\n", hex, s ? s : "");
@@ -172,8 +104,6 @@ static void __init cell_setup_arch(void)
 #endif
 
 	mmio_nvram_init();
-
-	cell_spumem_init(0);
 }
 
 /*
@@ -189,8 +119,6 @@ static void __init cell_init_early(void)
 
 	ppc64_interrupt_controller = IC_CELL_PIC;
 
-	cell_spumem_init(1);
-
 	DBG(" <- cell_init_early()\n");
 }
 

arch/powerpc/platforms/cell/spu_base.c

@@ -520,8 +520,50 @@ void spu_irq_setaffinity(struct spu *spu, int cpu)
 }
 EXPORT_SYMBOL_GPL(spu_irq_setaffinity);
 
-static void __iomem * __init map_spe_prop(struct device_node *n,
-						 const char *name)
+static int __init find_spu_node_id(struct device_node *spe)
+{
+	unsigned int *id;
+	struct device_node *cpu;
+	cpu = spe->parent->parent;
+	id = (unsigned int *)get_property(cpu, "node-id", NULL);
+	return id ? *id : 0;
+}
+
+static int __init cell_spuprop_present(struct spu *spu, struct device_node *spe,
+		const char *prop)
+{
+	static DEFINE_MUTEX(add_spumem_mutex);
+
+	struct address_prop {
+		unsigned long address;
+		unsigned int len;
+	} __attribute__((packed)) *p;
+	int proplen;
+
+	unsigned long start_pfn, nr_pages;
+	struct pglist_data *pgdata;
+	struct zone *zone;
+	int ret;
+
+	p = (void*)get_property(spe, prop, &proplen);
+	WARN_ON(proplen != sizeof (*p));
+
+	start_pfn = p->address >> PAGE_SHIFT;
+	nr_pages = ((unsigned long)p->len + PAGE_SIZE - 1) >> PAGE_SHIFT;
+
+	pgdata = NODE_DATA(spu->nid);
+	zone = pgdata->node_zones;
+
+	/* XXX rethink locking here */
+	mutex_lock(&add_spumem_mutex);
+	ret = __add_pages(zone, start_pfn, nr_pages);
+	mutex_unlock(&add_spumem_mutex);
+
+	return ret;
+}
+
+static void __iomem * __init map_spe_prop(struct spu *spu,
+		struct device_node *n, const char *name)
 {
 	struct address_prop {
 		unsigned long address;
@@ -530,6 +572,8 @@ static void __iomem * __init map_spe_prop(struct device_node *n,
 
 	void *p;
 	int proplen;
+	void* ret = NULL;
+	int err = 0;
 
 	p = get_property(n, name, &proplen);
 	if (proplen != sizeof (struct address_prop))
@@ -537,7 +581,14 @@ static void __iomem * __init map_spe_prop(struct device_node *n,
 
 	prop = p;
 
-	return ioremap(prop->address, prop->len);
+	err = cell_spuprop_present(spu, n, name);
+	if (err && (err != -EEXIST))
+		goto out;
+
+	ret = ioremap(prop->address, prop->len);
+
+ out:
+	return ret;
 }
 
 static void spu_unmap(struct spu *spu)
@@ -548,44 +599,45 @@ static void spu_unmap(struct spu *spu)
 	iounmap((u8 __iomem *)spu->local_store);
 }
 
-static int __init spu_map_device(struct spu *spu, struct device_node *spe)
+static int __init spu_map_device(struct spu *spu, struct device_node *node)
 {
 	char *prop;
 	int ret;
 
 	ret = -ENODEV;
-	prop = get_property(spe, "isrc", NULL);
+	prop = get_property(node, "isrc", NULL);
 	if (!prop)
 		goto out;
 	spu->isrc = *(unsigned int *)prop;
 
-	spu->name = get_property(spe, "name", NULL);
+	spu->name = get_property(node, "name", NULL);
 	if (!spu->name)
 		goto out;
 
-	prop = get_property(spe, "local-store", NULL);
+	prop = get_property(node, "local-store", NULL);
 	if (!prop)
 		goto out;
 	spu->local_store_phys = *(unsigned long *)prop;
 
 	/* we use local store as ram, not io memory */
-	spu->local_store = (void __force *)map_spe_prop(spe, "local-store");
+	spu->local_store = (void __force *)
+		map_spe_prop(spu, node, "local-store");
 	if (!spu->local_store)
 		goto out;
 
-	prop = get_property(spe, "problem", NULL);
+	prop = get_property(node, "problem", NULL);
 	if (!prop)
 		goto out_unmap;
 	spu->problem_phys = *(unsigned long *)prop;
 
-	spu->problem= map_spe_prop(spe, "problem");
+	spu->problem= map_spe_prop(spu, node, "problem");
 	if (!spu->problem)
 		goto out_unmap;
 
-	spu->priv1= map_spe_prop(spe, "priv1");
+	spu->priv1= map_spe_prop(spu, node, "priv1");
 	/* priv1 is not available on a hypervisor */
 
-	spu->priv2= map_spe_prop(spe, "priv2");
+	spu->priv2= map_spe_prop(spu, node, "priv2");
 	if (!spu->priv2)
 		goto out_unmap;
 	ret = 0;
@@ -597,17 +649,6 @@ out:
 	return ret;
 }
 
-static int __init find_spu_node_id(struct device_node *spe)
-{
-	unsigned int *id;
-	struct device_node *cpu;
-
-	cpu = spe->parent->parent;
-	id = (unsigned int *)get_property(cpu, "node-id", NULL);
-
-	return id ? *id : 0;
-}
-
 static int __init create_spu(struct device_node *spe)
 {
 	struct spu *spu;
@@ -624,6 +665,10 @@ static int __init create_spu(struct device_node *spe)
 		goto out_free;
 
 	spu->node = find_spu_node_id(spe);
+	spu->nid = of_node_to_nid(spe);
+	if (spu->nid == -1)
+		spu->nid = 0;
+
 	spu->stop_code = 0;
 	spu->slb_replace = 0;
 	spu->mm = NULL;

arch/powerpc/platforms/pseries/eeh_event.c

@@ -124,7 +124,15 @@ int eeh_send_failure_event (struct device_node *dn,
 {
 	unsigned long flags;
 	struct eeh_event *event;
+	char *location;
 
+	if (!mem_init_done) {
+		printk(KERN_ERR "EEH: event during early boot not handled\n");
+		location = (char *) get_property(dn, "ibm,loc-code", NULL);
+		printk(KERN_ERR "EEH: device node = %s\n", dn->full_name);
+		printk(KERN_ERR "EEH: PCI location = %s\n", location);
+		return 1;
+	}
 	event = kmalloc(sizeof(*event), GFP_ATOMIC);
 	if (event == NULL) {
 		printk (KERN_ERR "EEH: out of memory, event not handled\n");

arch/ppc/platforms/mpc866ads_setup.c

@@ -378,7 +378,7 @@ int __init mpc866ads_init(void)
 	ppc_sys_device_setfunc(MPC8xx_CPM_SMC1, PPC_SYS_FUNC_UART);
 #endif
 
-#ifdef CONFIG_SERIAL_CPM_SMCer
+#ifdef CONFIG_SERIAL_CPM_SMC
 	ppc_sys_device_enable(MPC8xx_CPM_SMC2);
 	ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART);
 #endif

arch/s390/kernel/compat_signal.c

@@ -430,7 +430,7 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
 
 	/* This is the X/Open sanctioned signal stack switching.  */
 	if (ka->sa.sa_flags & SA_ONSTACK) {
-		if (! on_sig_stack(sp))
+		if (! sas_ss_flags(sp))
 			sp = current->sas_ss_sp + current->sas_ss_size;
 	}
 

arch/s390/kernel/compat_wrapper.S

@@ -1608,3 +1608,45 @@ compat_sys_ppoll_wrapper:
 sys_unshare_wrapper:
 	llgfr	%r2,%r2			# unsigned long
 	jg	sys_unshare
+
+	.globl compat_sys_set_robust_list_wrapper
+compat_sys_set_robust_list_wrapper:
+	llgtr	%r2,%r2			# struct compat_robust_list_head *
+	llgfr	%r3,%r3			# size_t
+	jg	compat_sys_set_robust_list
+
+	.globl compat_sys_get_robust_list_wrapper
+compat_sys_get_robust_list_wrapper:
+	lgfr	%r2,%r2			# int
+	llgtr	%r3,%r3			# compat_uptr_t_t *
+	llgtr	%r4,%r4			# compat_size_t *
+	jg	compat_sys_get_robust_list
+
+	.globl sys_splice_wrapper
+sys_splice_wrapper:
+	lgfr	%r2,%r2			# int
+	llgtr	%r3,%r3			# loff_t *
+	lgfr	%r4,%r4			# int
+	llgtr	%r5,%r5			# loff_t *
+	llgfr	%r6,%r6			# size_t
+	llgf	%r0,164(%r15)		# unsigned int
+	stg	%r0,160(%r15)
+	jg	sys_splice
+
+	.globl	sys_sync_file_range_wrapper
+sys_sync_file_range_wrapper:
+	lgfr	%r2,%r2			# int
+	sllg	%r3,%r3,32		# get high word of 64bit loff_t
+	or	%r3,%r4			# get low word of 64bit loff_t
+	sllg	%r4,%r5,32		# get high word of 64bit loff_t
+	or	%r4,%r6			# get low word of 64bit loff_t
+	llgf	%r5,164(%r15)		# unsigned int
+	jg	sys_sync_file_range
+
+	.globl	sys_tee_wrapper
+sys_tee_wrapper:
+	lgfr	%r2,%r2			# int
+	lgfr	%r3,%r3			# int
+	llgfr	%r4,%r4			# size_t
+	llgfr	%r5,%r5			# unsigned int
+	jg	sys_tee

arch/s390/kernel/ptrace.c

@@ -734,7 +734,7 @@ asmlinkage void
 syscall_trace(struct pt_regs *regs, int entryexit)
 {
 	if (unlikely(current->audit_context) && entryexit)
-		audit_syscall_exit(current, AUDITSC_RESULT(regs->gprs[2]), regs->gprs[2]);
+		audit_syscall_exit(AUDITSC_RESULT(regs->gprs[2]), regs->gprs[2]);
 
 	if (!test_thread_flag(TIF_SYSCALL_TRACE))
 		goto out;
@@ -761,8 +761,7 @@ syscall_trace(struct pt_regs *regs, int entryexit)
 	}
  out:
 	if (unlikely(current->audit_context) && !entryexit)
-		audit_syscall_entry(current, 
-				    test_thread_flag(TIF_31BIT)?AUDIT_ARCH_S390:AUDIT_ARCH_S390X,
+		audit_syscall_entry(test_thread_flag(TIF_31BIT)?AUDIT_ARCH_S390:AUDIT_ARCH_S390X,
 				    regs->gprs[2], regs->orig_gpr2, regs->gprs[3],
 				    regs->gprs[4], regs->gprs[5]);
 }

arch/s390/kernel/signal.c

@@ -358,8 +358,9 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	} else {
                 regs->gprs[14] = (unsigned long)
 			frame->retcode | PSW_ADDR_AMODE;
-		err |= __put_user(S390_SYSCALL_OPCODE | __NR_rt_sigreturn,
-	                          (u16 __user *)(frame->retcode));
+		if (__put_user(S390_SYSCALL_OPCODE | __NR_rt_sigreturn,
+			       (u16 __user *)(frame->retcode)))
+			goto give_sigsegv;
 	}
 
 	/* Set up backchain. */

arch/s390/kernel/syscalls.S

@@ -312,3 +312,8 @@ SYSCALL(sys_faccessat,sys_faccessat,sys_faccessat_wrapper)	/* 300 */
 SYSCALL(sys_pselect6,sys_pselect6,compat_sys_pselect6_wrapper)
 SYSCALL(sys_ppoll,sys_ppoll,compat_sys_ppoll_wrapper)
 SYSCALL(sys_unshare,sys_unshare,sys_unshare_wrapper)
+SYSCALL(sys_set_robust_list,sys_set_robust_list,compat_sys_set_robust_list_wrapper)
+SYSCALL(sys_get_robust_list,sys_get_robust_list,compat_sys_get_robust_list_wrapper)
+SYSCALL(sys_splice,sys_splice,sys_splice_wrapper)
+SYSCALL(sys_sync_file_range,sys_sync_file_range,sys_sync_file_range_wrapper)
+SYSCALL(sys_tee,sys_tee,sys_tee_wrapper)

arch/s390/kernel/vmlinux.lds.S

@@ -58,9 +58,11 @@ SECTIONS
   . = ALIGN(4096);
   .data.page_aligned : { *(.data.idt) }
 
-  . = ALIGN(32);
+  . = ALIGN(256);
   .data.cacheline_aligned : { *(.data.cacheline_aligned) }
 
+  . = ALIGN(256);
+  .data.read_mostly : { *(.data.read_mostly) }
   _edata = .;			/* End of data section */
 
   . = ALIGN(8192);		/* init_task */

arch/s390/mm/extmem.c

@@ -192,6 +192,7 @@ query_segment_type (struct dcss_segment *seg)
 	diag_cc = dcss_diag (DCSS_SEGEXT, qin, &dummy, &vmrc);
 
 	if (diag_cc > 1) {
+		PRINT_WARN ("segment_type: diag returned error %ld\n", vmrc);
 		rc = dcss_diag_translate_rc (vmrc);
 		goto out_free;
 	}
@@ -553,7 +554,7 @@ segment_save(char *name)
 	int endpfn = 0;
 	char cmd1[160];
 	char cmd2[80];
-	int i;
+	int i, response;
 
 	if (!MACHINE_IS_VM)
 		return;
@@ -576,8 +577,20 @@ segment_save(char *name)
 			segtype_string[seg->range[i].start & 0xff]);
 	}
 	sprintf(cmd2, "SAVESEG %s", name);
-	cpcmd(cmd1, NULL, 0, NULL);
-	cpcmd(cmd2, NULL, 0, NULL);
+	response = 0;
+	cpcmd(cmd1, NULL, 0, &response);
+	if (response) {
+		PRINT_ERR("segment_save: DEFSEG failed with response code %i\n",
+			  response);
+		goto out;
+	}
+	cpcmd(cmd2, NULL, 0, &response);
+	if (response) {
+		PRINT_ERR("segment_save: SAVESEG failed with response code %i\n",
+			  response);
+		goto out;
+	}
+out:
 	spin_unlock(&dcss_lock);
 }
 

arch/sparc/kernel/systbls.S

@@ -23,7 +23,7 @@ sys_call_table:
 /*10*/  .long sys_unlink, sunos_execv, sys_chdir, sys_chown16, sys_mknod
 /*15*/	.long sys_chmod, sys_lchown16, sparc_brk, sys_nis_syscall, sys_lseek
 /*20*/	.long sys_getpid, sys_capget, sys_capset, sys_setuid16, sys_getuid16
-/*25*/	.long sys_time, sys_ptrace, sys_alarm, sys_sigaltstack, sys_pause
+/*25*/	.long sys_vmsplice, sys_ptrace, sys_alarm, sys_sigaltstack, sys_pause
 /*30*/	.long sys_utime, sys_lchown, sys_fchown, sys_access, sys_nice
 /*35*/	.long sys_chown, sys_sync, sys_kill, sys_newstat, sys_sendfile
 /*40*/	.long sys_newlstat, sys_dup, sys_pipe, sys_times, sys_getuid

arch/sparc64/kernel/ptrace.c

@@ -653,7 +653,7 @@ asmlinkage void syscall_trace(struct pt_regs *regs, int syscall_exit_p)
 		if (unlikely(tstate & (TSTATE_XCARRY | TSTATE_ICARRY)))
 			result = AUDITSC_FAILURE;
 
-		audit_syscall_exit(current, result, regs->u_regs[UREG_I0]);
+		audit_syscall_exit(result, regs->u_regs[UREG_I0]);
 	}
 
 	if (!(current->ptrace & PT_PTRACED))
@@ -677,8 +677,7 @@ asmlinkage void syscall_trace(struct pt_regs *regs, int syscall_exit_p)
 
 out:
 	if (unlikely(current->audit_context) && !syscall_exit_p)
-		audit_syscall_entry(current,
-				    (test_thread_flag(TIF_32BIT) ?
+		audit_syscall_entry((test_thread_flag(TIF_32BIT) ?
 				     AUDIT_ARCH_SPARC :
 				     AUDIT_ARCH_SPARC64),
 				    regs->u_regs[UREG_G1],

arch/sparc64/kernel/sys32.S

@@ -139,6 +139,7 @@ SIGN3(sys32_ioprio_set, sys_ioprio_set, %o0, %o1, %o2)
 SIGN2(sys32_splice, sys_splice, %o0, %o1)
 SIGN2(sys32_sync_file_range, compat_sync_file_range, %o0, %o5)
 SIGN2(sys32_tee, sys_tee, %o0, %o1)
+SIGN1(sys32_vmsplice, compat_sys_vmsplice, %o0)
 
 	.globl		sys32_mmap2
 sys32_mmap2:

arch/sparc64/kernel/systbls.S

@@ -25,7 +25,7 @@ sys_call_table32:
 /*10*/  .word sys_unlink, sunos_execv, sys_chdir, sys32_chown16, sys32_mknod
 /*15*/	.word sys_chmod, sys32_lchown16, sparc_brk, sys32_perfctr, sys32_lseek
 /*20*/	.word sys_getpid, sys_capget, sys_capset, sys32_setuid16, sys32_getuid16
-/*25*/	.word compat_sys_time, sys_ptrace, sys_alarm, sys32_sigaltstack, sys32_pause
+/*25*/	.word sys32_vmsplice, sys_ptrace, sys_alarm, sys32_sigaltstack, sys32_pause
 /*30*/	.word compat_sys_utime, sys_lchown, sys_fchown, sys32_access, sys32_nice
 	.word sys_chown, sys_sync, sys32_kill, compat_sys_newstat, sys32_sendfile
 /*40*/	.word compat_sys_newlstat, sys_dup, sys_pipe, compat_sys_times, sys_getuid
@@ -94,7 +94,7 @@ sys_call_table:
 /*10*/  .word sys_unlink, sys_nis_syscall, sys_chdir, sys_chown, sys_mknod
 /*15*/	.word sys_chmod, sys_lchown, sparc_brk, sys_perfctr, sys_lseek
 /*20*/	.word sys_getpid, sys_capget, sys_capset, sys_setuid, sys_getuid
-/*25*/	.word sys_nis_syscall, sys_ptrace, sys_alarm, sys_sigaltstack, sys_nis_syscall
+/*25*/	.word sys_vmsplice, sys_ptrace, sys_alarm, sys_sigaltstack, sys_nis_syscall
 /*30*/	.word sys_utime, sys_nis_syscall, sys_nis_syscall, sys_access, sys_nice
 	.word sys_nis_syscall, sys_sync, sys_kill, sys_newstat, sys_sendfile64
 /*40*/	.word sys_newlstat, sys_dup, sys_pipe, sys_times, sys_nis_syscall

arch/sparc64/mm/tlb.c

@@ -8,6 +8,7 @@
 #include <linux/percpu.h>
 #include <linux/mm.h>
 #include <linux/swap.h>
+#include <linux/preempt.h>
 
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
@@ -24,6 +25,8 @@ void flush_tlb_pending(void)
 {
 	struct mmu_gather *mp = &__get_cpu_var(mmu_gathers);
 
+	preempt_disable();
+
 	if (mp->tlb_nr) {
 		flush_tsb_user(mp);
 
@@ -38,6 +41,8 @@ void flush_tlb_pending(void)
 		}
 		mp->tlb_nr = 0;
 	}
+
+	preempt_enable();
 }
 
 void tlb_batch_add(struct mm_struct *mm, unsigned long vaddr, pte_t *ptep, pte_t orig)

arch/um/Kconfig

@@ -57,20 +57,6 @@ config STATIC_LINK
 	chroot, and you disable CONFIG_MODE_TT, you probably want to say Y
 	here.
 
-config HOST_2G_2G
-	bool "2G/2G host address space split"
-	default n
-	depends on MODE_TT
-	help
-	This is needed when the host on which you run has a 2G/2G memory
-	split, instead of the customary 3G/1G.
-
-	Note that to enable such a host
-	configuration, which makes sense only in some cases, you need special
-	host patches.
-
-	So, if you do not know what to do here, say 'N'.
-
 config KERNEL_HALF_GIGS
 	int "Kernel address space size (in .5G units)"
 	default "1"

arch/um/Kconfig.i386

@@ -16,6 +16,19 @@ config SEMAPHORE_SLEEPERS
 	bool
 	default y
 
+config HOST_2G_2G
+	bool "2G/2G host address space split"
+	default n
+	help
+	This is needed when the host on which you run has a 2G/2G memory
+	split, instead of the customary 3G/1G.
+
+	Note that to enable such a host
+	configuration, which makes sense only in some cases, you need special
+	host patches.
+
+	So, if you do not know what to do here, say 'N'.
+
 config TOP_ADDR
  	hex
  	default 0xc0000000 if !HOST_2G_2G
@@ -35,11 +48,13 @@ config 3_LEVEL_PGTABLES
 
 config STUB_CODE
 	hex
-	default 0xbfffe000
+	default 0xbfffe000 if !HOST_2G_2G
+	default 0x7fffe000 if HOST_2G_2G
 
 config STUB_DATA
 	hex
-	default 0xbffff000
+	default 0xbffff000 if !HOST_2G_2G
+	default 0x7ffff000 if HOST_2G_2G
 
 config STUB_START
 	hex

arch/um/Makefile

@@ -96,7 +96,8 @@ PHONY += linux
 all: linux
 
 linux: vmlinux
-	ln -f $< $@
+	@echo '  LINK $@'
+	$(Q)ln -f $< $@
 
 define archhelp
   echo '* linux		- Binary kernel image (./linux) - for backward'
@@ -117,6 +118,10 @@ prepare: $(ARCH_DIR)/include/kern_constants.h
 LINK-$(CONFIG_LD_SCRIPT_STATIC) += -static
 LINK-$(CONFIG_LD_SCRIPT_DYN) += -Wl,-rpath,/lib
 
+CFLAGS_NO_HARDENING := $(call cc-option, -fno-PIC,) $(call cc-option, -fno-pic,) \
+	$(call cc-option, -fno-stack-protector,) \
+	$(call cc-option, -fno-stack-protector-all,)
+
 CPP_MODE-$(CONFIG_MODE_TT) := -DMODE_TT
 CONFIG_KERNEL_STACK_ORDER ?= 2
 STACK_SIZE := $(shell echo $$[ 4096 * (1 << $(CONFIG_KERNEL_STACK_ORDER)) ] )
@@ -203,8 +208,8 @@ endef
 $(ARCH_DIR)/include/uml-config.h : include/linux/autoconf.h
 	$(call filechk,umlconfig)
 
-$(ARCH_DIR)/user-offsets.s: $(ARCH_DIR)/sys-$(SUBARCH)/user-offsets.c
-	$(CC) $(USER_CFLAGS) -S -o $@ $<
+$(ARCH_DIR)/sys-$(SUBARCH)/user-offsets.s: FORCE
+	$(Q)$(MAKE) $(build)=$(ARCH_DIR)/sys-$(SUBARCH) $@
 
 define filechk_gen-asm-offsets
         (set -e; \
@@ -219,13 +224,11 @@ define filechk_gen-asm-offsets
          echo ""; )
 endef
 
-$(ARCH_DIR)/include/user_constants.h: $(ARCH_DIR)/user-offsets.s
+$(ARCH_DIR)/include/user_constants.h: $(ARCH_DIR)/sys-$(SUBARCH)/user-offsets.s
 	$(call filechk,gen-asm-offsets)
 
-CLEAN_FILES += $(ARCH_DIR)/user-offsets.s
-
 $(ARCH_DIR)/include/kern_constants.h: $(objtree)/$(ARCH_DIR)/include
 	@echo '  SYMLINK $@'
-	$(Q) ln -sf ../../../include/asm-um/asm-offsets.h $@
+	$(Q)ln -sf ../../../include/asm-um/asm-offsets.h $@
 
-export SUBARCH USER_CFLAGS OS
+export SUBARCH USER_CFLAGS CFLAGS_NO_HARDENING OS

arch/um/defconfig

@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-mm1
-# Tue Jun 14 18:22:21 2005
+# Linux kernel version: 2.6.17-rc3
+# Fri Apr 28 09:31:20 2006
 #
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_UML=y
 CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_IRQ_RELEASE_METHOD=y
 
 #
 # UML-specific options
@@ -16,8 +15,50 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
 # CONFIG_MODE_TT is not set
 # CONFIG_STATIC_LINK is not set
 CONFIG_MODE_SKAS=y
+
+#
+# Host processor type and features
+#
+# CONFIG_M386 is not set
+# CONFIG_M486 is not set
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+CONFIG_M686=y
+# CONFIG_MPENTIUMII is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP2 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MGEODEGX1 is not set
+# CONFIG_MGEODE_LX is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_X86_GENERIC is not set
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_XADD=y
+CONFIG_X86_L1_CACHE_SHIFT=5
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_X86_PPRO_FENCE=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_POPAD_OK=y
+CONFIG_X86_CMPXCHG64=y
+CONFIG_X86_GOOD_APIC=y
+CONFIG_X86_USE_PPRO_CHECKSUM=y
+CONFIG_X86_TSC=y
 CONFIG_UML_X86=y
 # CONFIG_64BIT is not set
+CONFIG_SEMAPHORE_SLEEPERS=y
+# CONFIG_HOST_2G_2G is not set
 CONFIG_TOP_ADDR=0xc0000000
 # CONFIG_3_LEVEL_PGTABLES is not set
 CONFIG_STUB_CODE=0xbfffe000
@@ -25,22 +66,24 @@ CONFIG_STUB_DATA=0xbffff000
 CONFIG_STUB_START=0xbfffe000
 CONFIG_ARCH_HAS_SC_SIGNALS=y
 CONFIG_ARCH_REUSE_HOST_VSYSCALL_AREA=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_LD_SCRIPT_DYN=y
 CONFIG_NET=y
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 # CONFIG_HOSTFS is not set
+# CONFIG_HPPFS is not set
 CONFIG_MCONSOLE=y
 # CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_HOST_2G_2G is not set
 CONFIG_NEST_LEVEL=0
-CONFIG_KERNEL_HALF_GIGS=1
 # CONFIG_HIGHMEM is not set
 CONFIG_KERNEL_STACK_ORDER=2
 CONFIG_UML_REAL_TIME_CLOCK=y
@@ -49,7 +92,6 @@ CONFIG_UML_REAL_TIME_CLOCK=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -57,6 +99,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -64,26 +107,28 @@ CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -91,18 +136,43 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 
 #
-# Generic Driver Options
+# Block layer
 #
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Block devices
+#
+CONFIG_BLK_DEV_UBD=y
+# CONFIG_BLK_DEV_UBD_SYNC is not set
+CONFIG_BLK_DEV_COW_COMMON=y
+# CONFIG_MMAPPER is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # Character Devices
@@ -127,50 +197,23 @@ CONFIG_UML_SOUND=m
 CONFIG_SOUND=m
 CONFIG_HOSTAUDIO=m
 CONFIG_UML_RANDOM=y
-# CONFIG_MMAPPER is not set
-
-#
-# Block devices
-#
-CONFIG_BLK_DEV_UBD=y
-CONFIG_BLK_DEV_UBD_SYNC=y
-CONFIG_BLK_DEV_COW_COMMON=y
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_NETDEVICES=y
 
 #
-# UML Network Devices
+# Generic Driver Options
 #
-CONFIG_UML_NET=y
-CONFIG_UML_NET_ETHERTAP=y
-CONFIG_UML_NET_TUNTAP=y
-CONFIG_UML_NET_SLIP=y
-CONFIG_UML_NET_DAEMON=y
-CONFIG_UML_NET_MCAST=y
-CONFIG_UML_NET_SLIRP=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
 
 #
-# Networking support
+# Networking
 #
 
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -178,6 +221,7 @@ CONFIG_UNIX=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 # CONFIG_IP_PNP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
@@ -186,27 +230,31 @@ CONFIG_INET=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# TCP congestion control
-#
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
-CONFIG_TCP_CONG_WESTWOOD=y
-CONFIG_TCP_CONG_HTCP=y
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
 #
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -224,26 +272,46 @@ CONFIG_TCP_CONG_HTCP=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_KGDBOE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_IEEE80211 is not set
+
+#
+# UML Network Devices
+#
+CONFIG_UML_NET=y
+CONFIG_UML_NET_ETHERTAP=y
+CONFIG_UML_NET_TUNTAP=y
+CONFIG_UML_NET_SLIP=y
+CONFIG_UML_NET_DAEMON=y
+CONFIG_UML_NET_MCAST=y
+# CONFIG_UML_NET_PCAP is not set
+CONFIG_UML_NET_SLIRP=y
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
 
+#
+# PHY device support
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
 #
 # Wan interfaces
 #
@@ -263,6 +331,13 @@ CONFIG_SLIP=m
 # CONFIG_SLIP_MODE_SLIP6 is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
 
 #
 # File systems
@@ -274,17 +349,14 @@ CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
-# CONFIG_REISER4_FS is not set
 CONFIG_REISERFS_FS=y
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
 # CONFIG_REISERFS_FS_XATTR is not set
 # CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -295,11 +367,6 @@ CONFIG_QUOTACTL=y
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
 # CONFIG_FUSE_FS is not set
 
 #
@@ -323,14 +390,10 @@ CONFIG_JOLIET=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
-# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -430,6 +493,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=m
 # CONFIG_LIBCRC32C is not set
 
@@ -448,12 +512,18 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 CONFIG_DEBUG_SLAB=y
+# CONFIG_DEBUG_SLAB_LEAK is not set
+# CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_GPROF is not set
 # CONFIG_GCOV is not set
 # CONFIG_SYSCALL_DEBUG is not set

arch/um/drivers/cow_user.c

@@ -100,7 +100,7 @@ struct cow_header_v3_broken {
 	__u32 alignment;
 	__u32 cow_format;
 	char backing_file[PATH_LEN_V3];
-} __attribute__((packed));
+};
 
 /* COW format definitions - for now, we have only the usual COW bitmap */
 #define COW_BITMAP 0

arch/um/kernel/irq.c

@@ -89,16 +89,18 @@ void sigio_handler(int sig, union uml_pt_regs *regs)
 	struct irq_fd *irq_fd;
 	int n;
 
-	if(smp_sigio_handler()) return;
-	while(1){
+	if (smp_sigio_handler())
+		return;
+
+	while (1) {
 		n = os_waiting_for_events(active_fds);
 		if (n <= 0) {
 			if(n == -EINTR) continue;
 			else break;
 		}
 
-		for(irq_fd = active_fds; irq_fd != NULL; irq_fd = irq_fd->next){
-			if(irq_fd->current_events != 0){
+		for (irq_fd = active_fds; irq_fd != NULL; irq_fd = irq_fd->next) {
+			if (irq_fd->current_events != 0) {
 				irq_fd->current_events = 0;
 				do_IRQ(irq_fd->irq, regs);
 			}
@@ -110,19 +112,17 @@ void sigio_handler(int sig, union uml_pt_regs *regs)
 
 static void maybe_sigio_broken(int fd, int type)
 {
-	if(os_isatty(fd)){
-		if((type == IRQ_WRITE) && !pty_output_sigio){
+	if (os_isatty(fd)) {
+		if ((type == IRQ_WRITE) && !pty_output_sigio) {
 			write_sigio_workaround();
 			add_sigio_fd(fd, 0);
-		}
-		else if((type == IRQ_READ) && !pty_close_sigio){
+		} else if ((type == IRQ_READ) && !pty_close_sigio) {
 			write_sigio_workaround();
 			add_sigio_fd(fd, 1);
 		}
 	}
 }
 
-
 int activate_fd(int irq, int fd, int type, void *dev_id)
 {
 	struct pollfd *tmp_pfd;
@@ -132,16 +132,18 @@ int activate_fd(int irq, int fd, int type, void *dev_id)
 
 	pid = os_getpid();
 	err = os_set_fd_async(fd, pid);
-	if(err < 0)
+	if (err < 0)
 		goto out;
 
 	new_fd = um_kmalloc(sizeof(*new_fd));
 	err = -ENOMEM;
-	if(new_fd == NULL)
+	if (new_fd == NULL)
 		goto out;
 
-	if(type == IRQ_READ) events = UM_POLLIN | UM_POLLPRI;
-	else events = UM_POLLOUT;
+	if (type == IRQ_READ)
+		events = UM_POLLIN | UM_POLLPRI;
+	else
+		events = UM_POLLOUT;
 	*new_fd = ((struct irq_fd) { .next  		= NULL,
 				     .id 		= dev_id,
 				     .fd 		= fd,
@@ -165,8 +167,8 @@ int activate_fd(int irq, int fd, int type, void *dev_id)
 	 * a semaphore.
 	 */
 	flags = irq_lock();
-	for(irq_fd = active_fds; irq_fd != NULL; irq_fd = irq_fd->next){
-		if((irq_fd->fd == fd) && (irq_fd->type == type)){
+	for (irq_fd = active_fds; irq_fd != NULL; irq_fd = irq_fd->next) {
+		if ((irq_fd->fd == fd) && (irq_fd->type == type)) {
 			printk("Registering fd %d twice\n", fd);
 			printk("Irqs : %d, %d\n", irq_fd->irq, irq);
 			printk("Ids : 0x%p, 0x%p\n", irq_fd->id, dev_id);
@@ -175,13 +177,13 @@ int activate_fd(int irq, int fd, int type, void *dev_id)
 	}
 
 	/*-------------*/
-	if(type == IRQ_WRITE)
+	if (type == IRQ_WRITE)
 		fd = -1;
 
 	tmp_pfd = NULL;
 	n = 0;
 
-	while(1){
+	while (1) {
 		n = os_create_pollfd(fd, events, tmp_pfd, n);
 		if (n == 0)
 			break;
@@ -198,10 +200,8 @@ int activate_fd(int irq, int fd, int type, void *dev_id)
 		 * then we free the buffer tmp_fds and try again.
 		 */
 		irq_unlock(flags);
-		if (tmp_pfd != NULL) {
-			kfree(tmp_pfd);
-			tmp_pfd = NULL;
-		}
+		kfree(tmp_pfd);
+		tmp_pfd = NULL;
 
 		tmp_pfd = um_kmalloc(n);
 		if (tmp_pfd == NULL)
@@ -249,7 +249,7 @@ static int same_irq_and_dev(struct irq_fd *irq, void *d)
 {
 	struct irq_and_dev *data = d;
 
-	return((irq->irq == data->irq) && (irq->id == data->dev));
+	return ((irq->irq == data->irq) && (irq->id == data->dev));
 }
 
 void free_irq_by_irq_and_dev(unsigned int irq, void *dev)
@@ -262,7 +262,7 @@ void free_irq_by_irq_and_dev(unsigned int irq, void *dev)
 
 static int same_fd(struct irq_fd *irq, void *fd)
 {
-	return(irq->fd == *((int *) fd));
+	return (irq->fd == *((int *)fd));
 }
 
 void free_irq_by_fd(int fd)
@@ -276,16 +276,17 @@ static struct irq_fd *find_irq_by_fd(int fd, int irqnum, int *index_out)
 	int i = 0;
 	int fdi;
 
-	for(irq=active_fds; irq != NULL; irq = irq->next){
-		if((irq->fd == fd) && (irq->irq == irqnum)) break;
+	for (irq = active_fds; irq != NULL; irq = irq->next) {
+		if ((irq->fd == fd) && (irq->irq == irqnum))
+			break;
 		i++;
 	}
-	if(irq == NULL){
+	if (irq == NULL) {
 		printk("find_irq_by_fd doesn't have descriptor %d\n", fd);
 		goto out;
 	}
 	fdi = os_get_pollfd(i);
-	if((fdi != -1) && (fdi != fd)){
+	if ((fdi != -1) && (fdi != fd)) {
 		printk("find_irq_by_fd - mismatch between active_fds and "
 		       "pollfds, fd %d vs %d, need %d\n", irq->fd,
 		       fdi, fd);
@@ -294,7 +295,7 @@ static struct irq_fd *find_irq_by_fd(int fd, int irqnum, int *index_out)
 	}
 	*index_out = i;
  out:
-	return(irq);
+	return irq;
 }
 
 void reactivate_fd(int fd, int irqnum)
@@ -305,7 +306,7 @@ void reactivate_fd(int fd, int irqnum)
 
 	flags = irq_lock();
 	irq = find_irq_by_fd(fd, irqnum, &i);
-	if(irq == NULL){
+	if (irq == NULL) {
 		irq_unlock(flags);
 		return;
 	}
@@ -326,7 +327,7 @@ void deactivate_fd(int fd, int irqnum)
 
 	flags = irq_lock();
 	irq = find_irq_by_fd(fd, irqnum, &i);
-	if(irq == NULL)
+	if (irq == NULL)
 		goto out;
 	os_set_pollfd(i, -1);
  out:
@@ -338,15 +339,15 @@ int deactivate_all_fds(void)
 	struct irq_fd *irq;
 	int err;
 
-	for(irq=active_fds;irq != NULL;irq = irq->next){
+	for (irq = active_fds; irq != NULL; irq = irq->next) {
 		err = os_clear_fd_async(irq->fd);
-		if(err)
-			return(err);
+		if (err)
+			return err;
 	}
 	/* If there is a signal already queued, after unblocking ignore it */
 	os_set_ioignore();
 
-	return(0);
+	return 0;
 }
 
 void forward_interrupts(int pid)
@@ -356,9 +357,9 @@ void forward_interrupts(int pid)
 	int err;
 
 	flags = irq_lock();
-	for(irq=active_fds;irq != NULL;irq = irq->next){
+	for (irq = active_fds; irq != NULL; irq = irq->next) {
 		err = os_set_owner(irq->fd, pid);
-		if(err < 0){
+		if (err < 0) {
 			/* XXX Just remove the irq rather than
 			 * print out an infinite stream of these
 			 */
@@ -379,7 +380,7 @@ void forward_interrupts(int pid)
 unsigned int do_IRQ(int irq, union uml_pt_regs *regs)
 {
        irq_enter();
-       __do_IRQ(irq, (struct pt_regs *) regs);
+       __do_IRQ(irq, (struct pt_regs *)regs);
        irq_exit();
        return 1;
 }
@@ -392,12 +393,12 @@ int um_request_irq(unsigned int irq, int fd, int type,
 	int err;
 
 	err = request_irq(irq, handler, irqflags, devname, dev_id);
-	if(err)
-		return(err);
+	if (err)
+		return err;
 
-	if(fd != -1)
+	if (fd != -1)
 		err = activate_fd(irq, fd, type, dev_id);
-	return(err);
+	return err;
 }
 EXPORT_SYMBOL(um_request_irq);
 EXPORT_SYMBOL(reactivate_fd);
@@ -409,7 +410,7 @@ unsigned long irq_lock(void)
 	unsigned long flags;
 
 	spin_lock_irqsave(&irq_spinlock, flags);
-	return(flags);
+	return flags;
 }
 
 void irq_unlock(unsigned long flags)
@@ -452,7 +453,7 @@ void __init init_IRQ(void)
 	irq_desc[TIMER_IRQ].depth = 1;
 	irq_desc[TIMER_IRQ].handler = &SIGVTALRM_irq_type;
 	enable_irq(TIMER_IRQ);
-	for(i=1;i<NR_IRQS;i++){
+	for (i = 1; i < NR_IRQS; i++) {
 		irq_desc[i].status = IRQ_DISABLED;
 		irq_desc[i].action = NULL;
 		irq_desc[i].depth = 1;
@@ -467,7 +468,7 @@ int init_aio_irq(int irq, char *name, irqreturn_t (*handler)(int, void *,
 	int fds[2], err;
 
 	err = os_pipe(fds, 1, 1);
-	if(err){
+	if (err) {
 		printk("init_aio_irq - os_pipe failed, err = %d\n", -err);
 		goto out;
 	}
@@ -475,7 +476,7 @@ int init_aio_irq(int irq, char *name, irqreturn_t (*handler)(int, void *,
 	err = um_request_irq(irq, fds[0], IRQ_READ, handler,
 			     SA_INTERRUPT | SA_SAMPLE_RANDOM, name,
 			     (void *) (long) fds[0]);
-	if(err){
+	if (err) {
 		printk("init_aio_irq - : um_request_irq failed, err = %d\n",
 		       err);
 		goto out_close;
@@ -488,5 +489,5 @@ int init_aio_irq(int irq, char *name, irqreturn_t (*handler)(int, void *,
 	os_close_file(fds[0]);
 	os_close_file(fds[1]);
  out:
-	return(err);
+	return err;
 }

arch/um/kernel/physmem.c

@@ -407,6 +407,8 @@ unsigned long find_iomem(char *driver, unsigned long *len_out)
 			*len_out = region->size;
 			return(region->virt);
 		}
+
+		region = region->next;
 	}
 
 	return(0);

arch/um/kernel/ptrace.c

@@ -275,15 +275,13 @@ void syscall_trace(union uml_pt_regs *regs, int entryexit)
 
 	if (unlikely(current->audit_context)) {
 		if (!entryexit)
-			audit_syscall_entry(current,
-                                            HOST_AUDIT_ARCH,
+			audit_syscall_entry(HOST_AUDIT_ARCH,
 					    UPT_SYSCALL_NR(regs),
 					    UPT_SYSCALL_ARG1(regs),
 					    UPT_SYSCALL_ARG2(regs),
 					    UPT_SYSCALL_ARG3(regs),
 					    UPT_SYSCALL_ARG4(regs));
-		else audit_syscall_exit(current,
-                                        AUDITSC_RESULT(UPT_SYSCALL_RET(regs)),
+		else audit_syscall_exit(AUDITSC_RESULT(UPT_SYSCALL_RET(regs)),
                                         UPT_SYSCALL_RET(regs));
 	}
 

arch/um/kernel/skas/Makefile

@@ -6,9 +6,11 @@
 obj-y := clone.o exec_kern.o mem.o mmu.o process_kern.o \
 	syscall.o tlb.o uaccess.o
 
-USER_OBJS := clone.o
+# clone.o is in the stub, so it can't be built with profiling
+# GCC hardened also auto-enables -fpic, but we need %ebx so it can't work ->
+# disable it
 
-include arch/um/scripts/Makefile.rules
+CFLAGS_clone.o := $(CFLAGS_NO_HARDENING)
+UNPROFILE_OBJS := clone.o
 
-# clone.o is in the stub, so it can't be built with profiling
-$(obj)/clone.o : c_flags = -Wp,-MD,$(depfile) $(call unprofile,$(USER_CFLAGS))
+include arch/um/scripts/Makefile.rules

arch/um/kernel/time_kern.c

@@ -209,4 +209,4 @@ int __init timer_init(void)
 	return(0);
 }
 
-__initcall(timer_init);
+arch_initcall(timer_init);

arch/um/os-Linux/file.c

@@ -171,7 +171,7 @@ int os_sigio_async(int master, int slave)
 
 	flags = fcntl(master, F_GETFL);
 	if(flags < 0)
-		return errno;
+		return -errno;
 
 	if((fcntl(master, F_SETFL, flags | O_NONBLOCK | O_ASYNC) < 0) ||
 	   (fcntl(master, F_SETOWN, os_getpid()) < 0))

arch/um/os-Linux/irq.c

@@ -29,21 +29,21 @@ int os_waiting_for_events(struct irq_fd *active_fds)
 	int i, n, err;
 
 	n = poll(pollfds, pollfds_num, 0);
-	if(n < 0){
+	if (n < 0) {
 		err = -errno;
-		if(errno != EINTR)
+		if (errno != EINTR)
 			printk("sigio_handler: os_waiting_for_events:"
 			       " poll returned %d, errno = %d\n", n, errno);
 		return err;
 	}
 
-	if(n == 0)
+	if (n == 0)
 		return 0;
 
 	irq_fd = active_fds;
 
-	for(i = 0; i < pollfds_num; i++){
-		if(pollfds[i].revents != 0){
+	for (i = 0; i < pollfds_num; i++) {
+		if (pollfds[i].revents != 0) {
 			irq_fd->current_events = pollfds[i].revents;
 			pollfds[i].fd = -1;
 		}
@@ -54,7 +54,7 @@ int os_waiting_for_events(struct irq_fd *active_fds)
 
 int os_isatty(int fd)
 {
-	return(isatty(fd));
+	return isatty(fd);
 }
 
 int os_create_pollfd(int fd, int events, void *tmp_pfd, int size_tmpfds)
@@ -65,7 +65,7 @@ int os_create_pollfd(int fd, int events, void *tmp_pfd, int size_tmpfds)
 			return((pollfds_size + 1) * sizeof(pollfds[0]));
 		}
 
-		if(pollfds != NULL){
+		if (pollfds != NULL) {
 			memcpy(tmp_pfd, pollfds,
 			       sizeof(pollfds[0]) * pollfds_size);
 			/* remove old pollfds */
@@ -73,18 +73,15 @@ int os_create_pollfd(int fd, int events, void *tmp_pfd, int size_tmpfds)
 		}
 		pollfds = tmp_pfd;
 		pollfds_size++;
-	} else {
-		/* remove not used tmp_pfd */
-		if (tmp_pfd != NULL)
-			kfree(tmp_pfd);
-	}
+	} else
+		kfree(tmp_pfd);	/* remove not used tmp_pfd */
 
-	pollfds[pollfds_num] = ((struct pollfd) { .fd 	= fd,
-						  .events 	= events,
-						  .revents 	= 0 });
+	pollfds[pollfds_num] = ((struct pollfd) { .fd		= fd,
+						  .events	= events,
+						  .revents	= 0 });
 	pollfds_num++;
 
-	return(0);
+	return 0;
 }
 
 void os_free_irq_by_cb(int (*test)(struct irq_fd *, void *), void *arg,
@@ -94,11 +91,11 @@ void os_free_irq_by_cb(int (*test)(struct irq_fd *, void *), void *arg,
 	int i = 0;
 
 	prev = &active_fds;
-	while(*prev != NULL){
-		if((*test)(*prev, arg)){
+	while (*prev != NULL) {
+		if ((*test)(*prev, arg)) {
 			struct irq_fd *old_fd = *prev;
-			if((pollfds[i].fd != -1) &&
-			   (pollfds[i].fd != (*prev)->fd)){
+			if ((pollfds[i].fd != -1) &&
+			    (pollfds[i].fd != (*prev)->fd)) {
 				printk("os_free_irq_by_cb - mismatch between "
 				       "active_fds and pollfds, fd %d vs %d\n",
 				       (*prev)->fd, pollfds[i].fd);
@@ -110,7 +107,6 @@ void os_free_irq_by_cb(int (*test)(struct irq_fd *, void *), void *arg,
 			/* This moves the *whole* array after pollfds[i]
 			 * (though it doesn't spot as such)!
 			 */
-
 			memmove(&pollfds[i], &pollfds[i + 1],
 			       (pollfds_num - i) * sizeof(pollfds[0]));
 			if(*last_irq_ptr2 == &old_fd->next)
@@ -129,10 +125,9 @@ void os_free_irq_by_cb(int (*test)(struct irq_fd *, void *), void *arg,
 	return;
 }
 
-
 int os_get_pollfd(int i)
 {
-	return(pollfds[i].fd);
+	return pollfds[i].fd;
 }
 
 void os_set_pollfd(int i, int fd)
@@ -151,8 +146,10 @@ void init_irq_signals(int on_sigstack)
 	int flags;
 
 	flags = on_sigstack ? SA_ONSTACK : 0;
-	if(timer_irq_inited) h = (__sighandler_t) alarm_handler;
-	else h = boot_timer_handler;
+	if (timer_irq_inited)
+		h = (__sighandler_t)alarm_handler;
+	else
+		h = boot_timer_handler;
 
 	set_handler(SIGVTALRM, h, flags | SA_RESTART,
 		    SIGUSR1, SIGIO, SIGWINCH, SIGALRM, -1);

arch/um/os-Linux/main.c

@@ -74,6 +74,34 @@ static void last_ditch_exit(int sig)
 	exit(1);
 }
 
+#define UML_LIB_PATH	":/usr/lib/uml"
+
+static void setup_env_path(void)
+{
+	char *new_path = NULL;
+	char *old_path = NULL;
+	int path_len = 0;
+
+	old_path = getenv("PATH");
+	/* if no PATH variable is set or it has an empty value
+	 * just use the default + /usr/lib/uml
+	 */
+	if (!old_path || (path_len = strlen(old_path)) == 0) {
+		putenv("PATH=:/bin:/usr/bin/" UML_LIB_PATH);
+		return;
+	}
+
+	/* append /usr/lib/uml to the existing path */
+	path_len += strlen("PATH=" UML_LIB_PATH) + 1;
+	new_path = malloc(path_len);
+	if (!new_path) {
+		perror("coudn't malloc to set a new PATH");
+		return;
+	}
+	snprintf(new_path, path_len, "PATH=%s" UML_LIB_PATH, old_path);
+	putenv(new_path);
+}
+
 extern int uml_exitcode;
 
 extern void scan_elf_aux( char **envp);
@@ -114,6 +142,8 @@ int main(int argc, char **argv, char **envp)
 
 	set_stklim();
 
+	setup_env_path();
+
 	new_argv = malloc((argc + 1) * sizeof(char *));
 	if(new_argv == NULL){
 		perror("Mallocing argv");

arch/um/os-Linux/process.c

@@ -206,29 +206,36 @@ int os_drop_memory(void *addr, int length)
 int can_drop_memory(void)
 {
 	void *addr;
-	int fd;
+	int fd, ok = 0;
 
 	printk("Checking host MADV_REMOVE support...");
 	fd = create_mem_file(UM_KERN_PAGE_SIZE);
 	if(fd < 0){
 		printk("Creating test memory file failed, err = %d\n", -fd);
-		return 0;
+		goto out;
 	}
 
 	addr = mmap64(NULL, UM_KERN_PAGE_SIZE, PROT_READ | PROT_WRITE,
 		      MAP_SHARED, fd, 0);
 	if(addr == MAP_FAILED){
 		printk("Mapping test memory file failed, err = %d\n", -errno);
-		return 0;
+		goto out_close;
 	}
 
 	if(madvise(addr, UM_KERN_PAGE_SIZE, MADV_REMOVE) != 0){
 		printk("MADV_REMOVE failed, err = %d\n", -errno);
-		return 0;
+		goto out_unmap;
 	}
 
 	printk("OK\n");
-	return 1;
+	ok = 1;
+
+out_unmap:
+	munmap(addr, UM_KERN_PAGE_SIZE);
+out_close:
+	close(fd);
+out:
+	return ok;
 }
 
 void init_new_thread_stack(void *sig_stack, void (*usr1_handler)(int))

arch/um/os-Linux/skas/process.c

@@ -344,12 +344,12 @@ int copy_context_skas0(unsigned long new_stack, int pid)
 	err = ptrace_setregs(pid, regs);
 	if(err < 0)
 		panic("copy_context_skas0 : PTRACE_SETREGS failed, "
-		      "pid = %d, errno = %d\n", pid, errno);
+		      "pid = %d, errno = %d\n", pid, -err);
 
 	err = ptrace_setfpregs(pid, fp_regs);
 	if(err < 0)
 		panic("copy_context_skas0 : PTRACE_SETFPREGS failed, "
-		      "pid = %d, errno = %d\n", pid, errno);
+		      "pid = %d, errno = %d\n", pid, -err);
 
 	/* set a well known return code for detection of child write failure */
 	child_data->err = 12345678;
@@ -362,7 +362,7 @@ int copy_context_skas0(unsigned long new_stack, int pid)
 	pid = data->err;
 	if(pid < 0)
 		panic("copy_context_skas0 - stub-parent reports error %d\n",
-		      pid);
+		      -pid);
 
 	/* Wait, until child has finished too: read child's result from
 	 * child's stack and check it.

arch/um/os-Linux/sys-i386/registers.c

@@ -104,7 +104,7 @@ void init_registers(int pid)
 	err = ptrace(PTRACE_GETREGS, pid, 0, exec_regs);
 	if(err)
 		panic("check_ptrace : PTRACE_GETREGS failed, errno = %d",
-		      err);
+		      errno);
 
 	errno = 0;
 	err = ptrace(PTRACE_GETFPXREGS, pid, 0, exec_fpx_regs);
@@ -119,7 +119,7 @@ void init_registers(int pid)
 	err = ptrace(PTRACE_GETFPREGS, pid, 0, exec_fp_regs);
 	if(err)
 		panic("check_ptrace : PTRACE_GETFPREGS failed, errno = %d",
-		      err);
+		      errno);
 }
 
 void get_safe_registers(unsigned long *regs, unsigned long *fp_regs)

arch/um/os-Linux/sys-x86_64/registers.c

@@ -62,12 +62,12 @@ void init_registers(int pid)
 	err = ptrace(PTRACE_GETREGS, pid, 0, exec_regs);
 	if(err)
 		panic("check_ptrace : PTRACE_GETREGS failed, errno = %d",
-		      err);
+		      errno);
 
 	err = ptrace(PTRACE_GETFPREGS, pid, 0, exec_fp_regs);
 	if(err)
 		panic("check_ptrace : PTRACE_GETFPREGS failed, errno = %d",
-		      err);
+		      errno);
 }
 
 void get_safe_registers(unsigned long *regs, unsigned long *fp_regs)

arch/um/os-Linux/umid.c

@@ -178,14 +178,14 @@ static void __init create_pid_file(void)
 	fd = open(file, O_RDWR | O_CREAT | O_EXCL, 0644);
 	if(fd < 0){
 		printk("Open of machine pid file \"%s\" failed: %s\n",
-		       file, strerror(-fd));
+		       file, strerror(errno));
 		return;
 	}
 
 	snprintf(pid, sizeof(pid), "%d\n", getpid());
 	n = write(fd, pid, strlen(pid));
 	if(n != strlen(pid))
-		printk("Write of pid file failed - err = %d\n", -n);
+		printk("Write of pid file failed - err = %d\n", errno);
 
 	close(fd);
 }

arch/um/os-Linux/user_syms.c

@@ -96,6 +96,13 @@ EXPORT_SYMBOL_PROTO(getuid);
 EXPORT_SYMBOL_PROTO(fsync);
 EXPORT_SYMBOL_PROTO(fdatasync);
 
+/* Export symbols used by GCC for the stack protector. */
+extern void __stack_smash_handler(void *) __attribute__((weak));
+EXPORT_SYMBOL(__stack_smash_handler);
+
+extern long __guard __attribute__((weak));
+EXPORT_SYMBOL(__guard);
+
 /*
  * Overrides for Emacs so that we follow Linus's tabbing style.
  * Emacs will notice this stuff at the end of the file and automatically

arch/um/scripts/Makefile.rules

@@ -7,11 +7,19 @@ USER_SINGLE_OBJS := \
 USER_OBJS += $(filter %_user.o,$(obj-y) $(obj-m)  $(USER_SINGLE_OBJS))
 USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file))
 
-$(USER_OBJS) $(USER_OBJS:.o=.i) $(USER_OBJS:.o=.s) $(USER_OBJS:.o=.lst): \
-	c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) $(CFLAGS_$(notdir $@))
+$(USER_OBJS:.o=.%): \
+	c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) $(CFLAGS_$(*F).o)
 $(USER_OBJS) : CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ \
 	-Dunix -D__unix__ -D__$(SUBARCH)__
 
+# These are like USER_OBJS but filter USER_CFLAGS through unprofile instead of
+# using it directly.
+UNPROFILE_OBJS := $(foreach file,$(UNPROFILE_OBJS),$(obj)/$(file))
+
+$(UNPROFILE_OBJS:.o=.%): \
+	c_flags = -Wp,-MD,$(depfile) $(call unprofile,$(USER_CFLAGS)) $(CFLAGS_$(*F).o)
+$(UNPROFILE_OBJS) : CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ \
+	-Dunix -D__unix__ -D__$(SUBARCH)__
 
 # The stubs and unmap.o can't try to call mcount or update basic block data
 define unprofile

arch/um/sys-i386/Makefile

@@ -8,11 +8,16 @@ subarch-obj-y = lib/bitops.o kernel/semaphore.o
 subarch-obj-$(CONFIG_HIGHMEM) += mm/highmem.o
 subarch-obj-$(CONFIG_MODULES) += kernel/module.o
 
-USER_OBJS := bugs.o ptrace_user.o sigcontext.o fault.o stub_segv.o
+USER_OBJS := bugs.o ptrace_user.o sigcontext.o fault.o
 
-include arch/um/scripts/Makefile.rules
+USER_OBJS += user-offsets.s
+extra-y += user-offsets.s
 
 extra-$(CONFIG_MODE_TT) += unmap.o
 
-$(obj)/stub_segv.o $(obj)/unmap.o: \
-	_c_flags = $(call unprofile,$(CFLAGS))
+UNPROFILE_OBJS := stub_segv.o
+CFLAGS_stub_segv.o := $(CFLAGS_NO_HARDENING)
+
+include arch/um/scripts/Makefile.rules
+
+$(obj)/unmap.%: _c_flags = $(call unprofile,$(CFLAGS))

arch/um/sys-x86_64/Makefile

@@ -16,11 +16,16 @@ subarch-obj-$(CONFIG_MODULES) += kernel/module.o
 
 ldt-y = ../sys-i386/ldt.o
 
-USER_OBJS := ptrace_user.o sigcontext.o stub_segv.o
+USER_OBJS := ptrace_user.o sigcontext.o
 
-include arch/um/scripts/Makefile.rules
+USER_OBJS += user-offsets.s
+extra-y += user-offsets.s
 
 extra-$(CONFIG_MODE_TT) += unmap.o
 
-$(obj)/stub_segv.o $(obj)/unmap.o: \
-	_c_flags = $(call unprofile,$(CFLAGS))
+UNPROFILE_OBJS := stub_segv.o
+CFLAGS_stub_segv.o := $(CFLAGS_NO_HARDENING)
+
+include arch/um/scripts/Makefile.rules
+
+$(obj)/unmap.%: _c_flags = $(call unprofile,$(CFLAGS))

arch/x86_64/ia32/ia32entry.S

@@ -695,4 +695,5 @@ ia32_sys_call_table:
 	.quad sys_splice
 	.quad sys_sync_file_range
 	.quad sys_tee
+	.quad compat_sys_vmsplice
 ia32_syscall_end:		

arch/x86_64/kernel/ptrace.c

@@ -600,12 +600,12 @@ asmlinkage void syscall_trace_enter(struct pt_regs *regs)
 
 	if (unlikely(current->audit_context)) {
 		if (test_thread_flag(TIF_IA32)) {
-			audit_syscall_entry(current, AUDIT_ARCH_I386,
+			audit_syscall_entry(AUDIT_ARCH_I386,
 					    regs->orig_rax,
 					    regs->rbx, regs->rcx,
 					    regs->rdx, regs->rsi);
 		} else {
-			audit_syscall_entry(current, AUDIT_ARCH_X86_64,
+			audit_syscall_entry(AUDIT_ARCH_X86_64,
 					    regs->orig_rax,
 					    regs->rdi, regs->rsi,
 					    regs->rdx, regs->r10);
@@ -616,7 +616,7 @@ asmlinkage void syscall_trace_enter(struct pt_regs *regs)
 asmlinkage void syscall_trace_leave(struct pt_regs *regs)
 {
 	if (unlikely(current->audit_context))
-		audit_syscall_exit(current, AUDITSC_RESULT(regs->rax), regs->rax);
+		audit_syscall_exit(AUDITSC_RESULT(regs->rax), regs->rax);
 
 	if ((test_thread_flag(TIF_SYSCALL_TRACE)
 	     || test_thread_flag(TIF_SINGLESTEP))

arch/x86_64/kernel/setup.c

@@ -1426,3 +1426,22 @@ struct seq_operations cpuinfo_op = {
 	.show =	show_cpuinfo,
 };
 
+#ifdef CONFIG_INPUT_PCSPKR
+#include <linux/platform_device.h>
+static __init int add_pcspkr(void)
+{
+	struct platform_device *pd;
+	int ret;
+
+	pd = platform_device_alloc("pcspkr", -1);
+	if (!pd)
+		return -ENOMEM;
+
+	ret = platform_device_add(pd);
+	if (ret)
+		platform_device_put(pd);
+
+	return ret;
+}
+device_initcall(add_pcspkr);
+#endif

drivers/char/genrtc.c

@@ -200,13 +200,13 @@ static ssize_t gen_rtc_read(struct file *file, char __user *buf,
 	/* first test allows optimizer to nuke this case for 32-bit machines */
 	if (sizeof (int) != sizeof (long) && count == sizeof (unsigned int)) {
 		unsigned int uidata = data;
-		retval = put_user(uidata, (unsigned long __user *)buf);
+		retval = put_user(uidata, (unsigned int __user *)buf) ?:
+			sizeof(unsigned int);
 	}
 	else {
-		retval = put_user(data, (unsigned long __user *)buf);
+		retval = put_user(data, (unsigned long __user *)buf) ?:
+			sizeof(unsigned long);
 	}
-	if (!retval)
-		retval = sizeof(unsigned long);
  out:
 	current->state = TASK_RUNNING;
 	remove_wait_queue(&gen_rtc_wait, &wait);

drivers/char/keyboard.c

@@ -860,9 +860,32 @@ static void k_slock(struct vc_data *vc, unsigned char value, char up_flag, struc
 }
 
 /* by default, 300ms interval for combination release */
-static long brl_timeout = 300;
-MODULE_PARM_DESC(brl_timeout, "Braille keys release delay in ms (0 for combination on first release, < 0 for dead characters)");
-module_param(brl_timeout, long, 0644);
+static unsigned brl_timeout = 300;
+MODULE_PARM_DESC(brl_timeout, "Braille keys release delay in ms (0 for commit on first key release)");
+module_param(brl_timeout, uint, 0644);
+
+static unsigned brl_nbchords = 1;
+MODULE_PARM_DESC(brl_nbchords, "Number of chords that produce a braille pattern (0 for dead chords)");
+module_param(brl_nbchords, uint, 0644);
+
+static void k_brlcommit(struct vc_data *vc, unsigned int pattern, char up_flag, struct pt_regs *regs)
+{
+	static unsigned long chords;
+	static unsigned committed;
+
+	if (!brl_nbchords)
+		k_deadunicode(vc, BRL_UC_ROW | pattern, up_flag, regs);
+	else {
+		committed |= pattern;
+		chords++;
+		if (chords == brl_nbchords) {
+			k_unicode(vc, BRL_UC_ROW | committed, up_flag, regs);
+			chords = 0;
+			committed = 0;
+		}
+	}
+}
+
 static void k_brl(struct vc_data *vc, unsigned char value, char up_flag, struct pt_regs *regs)
 {
 	static unsigned pressed,committing;
@@ -882,11 +905,6 @@ static void k_brl(struct vc_data *vc, unsigned char value, char up_flag, struct
 	if (value > 8)
 		return;
 
-	if (brl_timeout < 0) {
-		k_deadunicode(vc, BRL_UC_ROW | (1 << (value - 1)), up_flag, regs);
-		return;
-	}
-
 	if (up_flag) {
 		if (brl_timeout) {
 			if (!committing ||
@@ -897,13 +915,13 @@ static void k_brl(struct vc_data *vc, unsigned char value, char up_flag, struct
 			pressed &= ~(1 << (value - 1));
 			if (!pressed) {
 				if (committing) {
-					k_unicode(vc, BRL_UC_ROW | committing, 0, regs);
+					k_brlcommit(vc, committing, 0, regs);
 					committing = 0;
 				}
 			}
 		} else {
 			if (committing) {
-				k_unicode(vc, BRL_UC_ROW | committing, 0, regs);
+				k_brlcommit(vc, committing, 0, regs);
 				committing = 0;
 			}
 			pressed &= ~(1 << (value - 1));

drivers/char/mwave/mwavedd.c

@@ -271,7 +271,7 @@ static int mwave_ioctl(struct inode *inode, struct file *file,
 				ipcnum,
 				pDrvData->IPCs[ipcnum].usIntCount);
 	
-			if (ipcnum > ARRAY_SIZE(pDrvData->IPCs)) {
+			if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) {
 				PRINTK_ERROR(KERN_ERR_MWAVE
 						"mwavedd::mwave_ioctl:"
 						" IOCTL_MW_REGISTER_IPC:"

drivers/char/tipar.c

@@ -515,7 +515,7 @@ tipar_init_module(void)
 		err = PTR_ERR(tipar_class);
 		goto out_chrdev;
 	}
-	if (parport_register_driver(&tipar_driver) || tp_count == 0) {
+	if (parport_register_driver(&tipar_driver)) {
 		printk(KERN_ERR "tipar: unable to register with parport\n");
 		err = -EIO;
 		goto out_class;

drivers/edac/e752x_edac.c

@@ -25,6 +25,8 @@
 #include <linux/slab.h>
 #include "edac_mc.h"
 
+static int force_function_unhide;
+
 #define e752x_printk(level, fmt, arg...) \
 	edac_printk(level, "e752x", fmt, ##arg)
 
@@ -782,8 +784,16 @@ static int e752x_probe1(struct pci_dev *pdev, int dev_idx)
 	debugf0("%s(): mci\n", __func__);
 	debugf0("Starting Probe1\n");
 
-	/* enable device 0 function 1 */
+	/* check to see if device 0 function 1 is enabled; if it isn't, we
+	 * assume the BIOS has reserved it for a reason and is expecting
+	 * exclusive access, we take care not to violate that assumption and
+	 * fail the probe. */
 	pci_read_config_byte(pdev, E752X_DEVPRES1, &stat8);
+	if (!force_function_unhide && !(stat8 & (1 << 5))) {
+		printk(KERN_INFO "Contact your BIOS vendor to see if the "
+			"E752x error registers can be safely un-hidden\n");
+		goto fail;
+	}
 	stat8 |= (1 << 5);
 	pci_write_config_byte(pdev, E752X_DEVPRES1, stat8);
 
@@ -1063,3 +1073,8 @@ module_exit(e752x_exit);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Linux Networx (http://lnxi.com) Tom Zimmerman\n");
 MODULE_DESCRIPTION("MC support for Intel e752x memory controllers");
+
+module_param(force_function_unhide, int, 0444);
+MODULE_PARM_DESC(force_function_unhide, "if BIOS sets Dev0:Fun1 up as hidden:"
+" 1=force unhide and hope BIOS doesn't fight driver for Dev0:Fun1 access");
+

drivers/infiniband/hw/ipath/ipath_debug.h

@@ -60,11 +60,11 @@
 #define __IPATH_KERNEL_SEND 0x2000	/* use kernel mode send */
 #define __IPATH_EPKTDBG     0x4000	/* print ethernet packet data */
 #define __IPATH_SMADBG      0x8000	/* sma packet debug */
-#define __IPATH_IPATHDBG    0x10000	/* Ethernet (IPATH) general debug on */
-#define __IPATH_IPATHWARN   0x20000	/* Ethernet (IPATH) warnings on */
-#define __IPATH_IPATHERR    0x40000	/* Ethernet (IPATH) errors on */
-#define __IPATH_IPATHPD     0x80000	/* Ethernet (IPATH) packet dump on */
-#define __IPATH_IPATHTABLE  0x100000	/* Ethernet (IPATH) table dump on */
+#define __IPATH_IPATHDBG    0x10000	/* Ethernet (IPATH) gen debug */
+#define __IPATH_IPATHWARN   0x20000	/* Ethernet (IPATH) warnings */
+#define __IPATH_IPATHERR    0x40000	/* Ethernet (IPATH) errors */
+#define __IPATH_IPATHPD     0x80000	/* Ethernet (IPATH) packet dump */
+#define __IPATH_IPATHTABLE  0x100000	/* Ethernet (IPATH) table dump */
 
 #else				/* _IPATH_DEBUGGING */
 
@@ -79,11 +79,12 @@
 #define __IPATH_TRSAMPLE  0x0	/* generate trace buffer sample entries */
 #define __IPATH_VERBDBG   0x0	/* very verbose debug */
 #define __IPATH_PKTDBG    0x0	/* print packet data */
-#define __IPATH_PROCDBG   0x0	/* print process startup (init)/exit messages */
+#define __IPATH_PROCDBG   0x0	/* process startup (init)/exit messages */
 /* print mmap/nopage stuff, not using VDBG any more */
 #define __IPATH_MMDBG     0x0
 #define __IPATH_EPKTDBG   0x0	/* print ethernet packet data */
-#define __IPATH_SMADBG    0x0   /* print process startup (init)/exit messages */#define __IPATH_IPATHDBG  0x0	/* Ethernet (IPATH) table dump on */
+#define __IPATH_SMADBG    0x0   /* process startup (init)/exit messages */
+#define __IPATH_IPATHDBG  0x0	/* Ethernet (IPATH) table dump on */
 #define __IPATH_IPATHWARN 0x0	/* Ethernet (IPATH) warnings on   */
 #define __IPATH_IPATHERR  0x0	/* Ethernet (IPATH) errors on   */
 #define __IPATH_IPATHPD   0x0	/* Ethernet (IPATH) packet dump on   */

drivers/infiniband/hw/ipath/ipath_diag.c

@@ -277,13 +277,14 @@ static int ipath_diag_open(struct inode *in, struct file *fp)
 
 bail:
 	spin_unlock_irqrestore(&ipath_devs_lock, flags);
-	mutex_unlock(&ipath_mutex);
 
 	/* Only expose a way to reset the device if we
 	   make it into diag mode. */
 	if (ret == 0)
 		ipath_expose_reset(&dd->pcidev->dev);
 
+	mutex_unlock(&ipath_mutex);
+
 	return ret;
 }
 

drivers/infiniband/hw/ipath/ipath_driver.c

@@ -418,9 +418,19 @@ static int __devinit ipath_init_one(struct pci_dev *pdev,
 
 	ret = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
 	if (ret) {
-		dev_info(&pdev->dev, "pci_set_dma_mask unit %u "
-			 "fails: %d\n", dd->ipath_unit, ret);
-		goto bail_regions;
+		/*
+		 * if the 64 bit setup fails, try 32 bit.  Some systems
+		 * do not setup 64 bit maps on systems with 2GB or less
+		 * memory installed.
+		 */
+		ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+		if (ret) {
+			dev_info(&pdev->dev, "pci_set_dma_mask unit %u "
+				 "fails: %d\n", dd->ipath_unit, ret);
+			goto bail_regions;
+		}
+		else
+			ipath_dbg("No 64bit DMA mask, used 32 bit mask\n");
 	}
 
 	pci_set_master(pdev);
@@ -1949,7 +1959,7 @@ int ipath_reset_device(int unit)
 	}
 
 	if (dd->ipath_pd)
-		for (i = 1; i < dd->ipath_portcnt; i++) {
+		for (i = 1; i < dd->ipath_cfgports; i++) {
 			if (dd->ipath_pd[i] && dd->ipath_pd[i]->port_cnt) {
 				ipath_dbg("unit %u port %d is in use "
 					  "(PID %u cmd %s), can't reset\n",

drivers/infiniband/hw/ipath/ipath_init_chip.c

@@ -53,13 +53,19 @@ MODULE_PARM_DESC(cfgports, "Set max number of ports to use");
 
 /*
  * Number of buffers reserved for driver (layered drivers and SMA
- * send).  Reserved at end of buffer list.
+ * send).  Reserved at end of buffer list.   Initialized based on
+ * number of PIO buffers if not set via module interface.
+ * The problem with this is that it's global, but we'll use different
+ * numbers for different chip types.  So the default value is not
+ * very useful.  I've redefined it for the 1.3 release so that it's
+ * zero unless set by the user to something else, in which case we
+ * try to respect it.
  */
-static ushort ipath_kpiobufs = 32;
+static ushort ipath_kpiobufs;
 
 static int ipath_set_kpiobufs(const char *val, struct kernel_param *kp);
 
-module_param_call(kpiobufs, ipath_set_kpiobufs, param_get_uint,
+module_param_call(kpiobufs, ipath_set_kpiobufs, param_get_ushort,
 		  &ipath_kpiobufs, S_IWUSR | S_IRUGO);
 MODULE_PARM_DESC(kpiobufs, "Set number of PIO buffers for driver");
 
@@ -531,8 +537,11 @@ static int init_housekeeping(struct ipath_devdata *dd,
 	 * Don't clear ipath_flags as 8bit mode was set before
 	 * entering this func. However, we do set the linkstate to
 	 * unknown, so we can watch for a transition.
+	 * PRESENT is set because we want register reads to work,
+	 * and the kernel infrastructure saw it in config space;
+	 * We clear it if we have failures.
 	 */
-	dd->ipath_flags |= IPATH_LINKUNK;
+	dd->ipath_flags |= IPATH_LINKUNK | IPATH_PRESENT;
 	dd->ipath_flags &= ~(IPATH_LINKACTIVE | IPATH_LINKARMED |
 			     IPATH_LINKDOWN | IPATH_LINKINIT);
 
@@ -560,6 +569,7 @@ static int init_housekeeping(struct ipath_devdata *dd,
 	    || (dd->ipath_uregbase & 0xffffffff) == 0xffffffff) {
 		ipath_dev_err(dd, "Register read failures from chip, "
 			      "giving up initialization\n");
+		dd->ipath_flags &= ~IPATH_PRESENT;
 		ret = -ENODEV;
 		goto done;
 	}
@@ -682,16 +692,14 @@ int ipath_init_chip(struct ipath_devdata *dd, int reinit)
 	 */
 	dd->ipath_pioavregs = ALIGN(val, sizeof(u64) * BITS_PER_BYTE / 2)
 		/ (sizeof(u64) * BITS_PER_BYTE / 2);
-	if (!ipath_kpiobufs)	/* have to have at least 1, for SMA */
-		kpiobufs = ipath_kpiobufs = 1;
-	else if ((dd->ipath_piobcnt2k + dd->ipath_piobcnt4k) <
-		 (dd->ipath_cfgports * IPATH_MIN_USER_PORT_BUFCNT)) {
-		dev_info(&dd->pcidev->dev, "Too few PIO buffers (%u) "
-			 "for %u ports to have %u each!\n",
-			 dd->ipath_piobcnt2k + dd->ipath_piobcnt4k,
-			 dd->ipath_cfgports, IPATH_MIN_USER_PORT_BUFCNT);
-		kpiobufs = 1;	/* reserve just the minimum for SMA/ether */
-	} else
+	if (ipath_kpiobufs == 0) {
+		/* not set by user, or set explictly to default  */
+		if ((dd->ipath_piobcnt2k + dd->ipath_piobcnt4k) > 128)
+			kpiobufs = 32;
+		else
+			kpiobufs = 16;
+	}
+	else
 		kpiobufs = ipath_kpiobufs;
 
 	if (kpiobufs >

drivers/infiniband/hw/ipath/ipath_intr.c

@@ -665,14 +665,14 @@ static void handle_layer_pioavail(struct ipath_devdata *dd)
 
 	ret = __ipath_layer_intr(dd, IPATH_LAYER_INT_SEND_CONTINUE);
 	if (ret > 0)
-		goto clear;
+		goto set;
 
 	ret = __ipath_verbs_piobufavail(dd);
 	if (ret > 0)
-		goto clear;
+		goto set;
 
 	return;
-clear:
+set:
 	set_bit(IPATH_S_PIOINTBUFAVAIL, &dd->ipath_sendctrl);
 	ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
 			 dd->ipath_sendctrl);
@@ -719,11 +719,24 @@ static void handle_rcv(struct ipath_devdata *dd, u32 istat)
 irqreturn_t ipath_intr(int irq, void *data, struct pt_regs *regs)
 {
 	struct ipath_devdata *dd = data;
-	u32 istat = ipath_read_kreg32(dd, dd->ipath_kregs->kr_intstatus);
+	u32 istat;
 	ipath_err_t estat = 0;
 	static unsigned unexpected = 0;
 	irqreturn_t ret;
 
+	if(!(dd->ipath_flags & IPATH_PRESENT)) {
+		/* this is mostly so we don't try to touch the chip while
+		 * it is being reset */
+		/*
+		 * This return value is perhaps odd, but we do not want the
+		 * interrupt core code to remove our interrupt handler
+		 * because we don't appear to be handling an interrupt
+		 * during a chip reset.
+		 */
+		return IRQ_HANDLED;
+	}
+
+	istat = ipath_read_kreg32(dd, dd->ipath_kregs->kr_intstatus);
 	if (unlikely(!istat)) {
 		ipath_stats.sps_nullintr++;
 		ret = IRQ_NONE; /* not our interrupt, or already handled */

drivers/infiniband/hw/ipath/ipath_kernel.h

@@ -731,7 +731,7 @@ u64 ipath_read_kreg64_port(const struct ipath_devdata *, ipath_kreg,
 static inline u32 ipath_read_ureg32(const struct ipath_devdata *dd,
 				    ipath_ureg regno, int port)
 {
-	if (!dd->ipath_kregbase)
+	if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
 		return 0;
 
 	return readl(regno + (u64 __iomem *)
@@ -762,7 +762,7 @@ static inline void ipath_write_ureg(const struct ipath_devdata *dd,
 static inline u32 ipath_read_kreg32(const struct ipath_devdata *dd,
 				    ipath_kreg regno)
 {
-	if (!dd->ipath_kregbase)
+	if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
 		return -1;
 	return readl((u32 __iomem *) & dd->ipath_kregbase[regno]);
 }
@@ -770,7 +770,7 @@ static inline u32 ipath_read_kreg32(const struct ipath_devdata *dd,
 static inline u64 ipath_read_kreg64(const struct ipath_devdata *dd,
 				    ipath_kreg regno)
 {
-	if (!dd->ipath_kregbase)
+	if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
 		return -1;
 
 	return readq(&dd->ipath_kregbase[regno]);
@@ -786,7 +786,7 @@ static inline void ipath_write_kreg(const struct ipath_devdata *dd,
 static inline u64 ipath_read_creg(const struct ipath_devdata *dd,
 				  ipath_sreg regno)
 {
-	if (!dd->ipath_kregbase)
+	if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
 		return 0;
 
 	return readq(regno + (u64 __iomem *)
@@ -797,7 +797,7 @@ static inline u64 ipath_read_creg(const struct ipath_devdata *dd,
 static inline u32 ipath_read_creg32(const struct ipath_devdata *dd,
 					 ipath_sreg regno)
 {
-	if (!dd->ipath_kregbase)
+	if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
 		return 0;
 	return readl(regno + (u64 __iomem *)
 		     (dd->ipath_cregbase +

drivers/infiniband/hw/ipath/ipath_layer.c

@@ -46,13 +46,15 @@
 /* Acquire before ipath_devs_lock. */
 static DEFINE_MUTEX(ipath_layer_mutex);
 
+static int ipath_verbs_registered;
+
 u16 ipath_layer_rcv_opcode;
+
 static int (*layer_intr)(void *, u32);
 static int (*layer_rcv)(void *, void *, struct sk_buff *);
 static int (*layer_rcv_lid)(void *, void *);
 static int (*verbs_piobufavail)(void *);
 static void (*verbs_rcv)(void *, void *, void *, u32);
-static int ipath_verbs_registered;
 
 static void *(*layer_add_one)(int, struct ipath_devdata *);
 static void (*layer_remove_one)(void *);
@@ -586,6 +588,8 @@ void ipath_verbs_unregister(void)
 	verbs_rcv = NULL;
 	verbs_timer_cb = NULL;
 
+	ipath_verbs_registered = 0;
+
 	mutex_unlock(&ipath_layer_mutex);
 }
 

drivers/infiniband/hw/ipath/ipath_pe800.c

@@ -972,6 +972,8 @@ static int ipath_setup_pe_reset(struct ipath_devdata *dd)
 	/* Use ERROR so it shows up in logs, etc. */
 	ipath_dev_err(dd, "Resetting PE-800 unit %u\n",
 		      dd->ipath_unit);
+	/* keep chip from being accessed in a few places */
+	dd->ipath_flags &= ~(IPATH_INITTED|IPATH_PRESENT);
 	val = dd->ipath_control | INFINIPATH_C_RESET;
 	ipath_write_kreg(dd, dd->ipath_kregs->kr_control, val);
 	mb();
@@ -997,6 +999,8 @@ static int ipath_setup_pe_reset(struct ipath_devdata *dd)
 		if ((r = pci_enable_device(dd->pcidev)))
 			ipath_dev_err(dd, "pci_enable_device failed after "
 				      "reset: %d\n", r);
+		/* whether it worked or not, mark as present, again */
+		dd->ipath_flags |= IPATH_PRESENT;
 		val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_revision);
 		if (val == dd->ipath_revision) {
 			ipath_cdbg(VERBOSE, "Got matching revision "

drivers/infiniband/hw/ipath/ipath_registers.h

@@ -34,8 +34,9 @@
 #define _IPATH_REGISTERS_H
 
 /*
- * This file should only be included by kernel source, and by the diags.
- * It defines the registers, and their contents, for the InfiniPath HT-400 chip
+ * This file should only be included by kernel source, and by the diags.  It
+ * defines the registers, and their contents, for the InfiniPath HT-400
+ * chip.
  */
 
 /*
@@ -156,8 +157,10 @@
 #define INFINIPATH_IBCC_FLOWCTRLWATERMARK_SHIFT 8
 #define INFINIPATH_IBCC_LINKINITCMD_MASK 0x3ULL
 #define INFINIPATH_IBCC_LINKINITCMD_DISABLE 1
-#define INFINIPATH_IBCC_LINKINITCMD_POLL 2	/* cycle through TS1/TS2 till OK */
-#define INFINIPATH_IBCC_LINKINITCMD_SLEEP 3	/* wait for TS1, then go on */
+/* cycle through TS1/TS2 till OK */
+#define INFINIPATH_IBCC_LINKINITCMD_POLL 2
+/* wait for TS1, then go on */
+#define INFINIPATH_IBCC_LINKINITCMD_SLEEP 3
 #define INFINIPATH_IBCC_LINKINITCMD_SHIFT 16
 #define INFINIPATH_IBCC_LINKCMD_MASK 0x3ULL
 #define INFINIPATH_IBCC_LINKCMD_INIT 1	/* move to 0x11 */
@@ -182,7 +185,8 @@
 #define INFINIPATH_IBCS_LINKSTATE_SHIFT 4
 #define INFINIPATH_IBCS_TXREADY       0x40000000
 #define INFINIPATH_IBCS_TXCREDITOK    0x80000000
-/* link training states (shift by INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) */
+/* link training states (shift by
+   INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) */
 #define INFINIPATH_IBCS_LT_STATE_DISABLED	0x00
 #define INFINIPATH_IBCS_LT_STATE_LINKUP		0x01
 #define INFINIPATH_IBCS_LT_STATE_POLLACTIVE	0x02
@@ -267,10 +271,12 @@
 /* kr_serdesconfig0 bits */
 #define INFINIPATH_SERDC0_RESET_MASK  0xfULL	/* overal reset bits */
 #define INFINIPATH_SERDC0_RESET_PLL   0x10000000ULL	/* pll reset */
-#define INFINIPATH_SERDC0_TXIDLE      0xF000ULL	/* tx idle enables (per lane) */
-#define INFINIPATH_SERDC0_RXDETECT_EN 0xF0000ULL	/* rx detect enables (per lane) */
-#define INFINIPATH_SERDC0_L1PWR_DN	 0xF0ULL	/* L1 Power down; use with RXDETECT,
-							   Otherwise not used on IB side */
+/* tx idle enables (per lane) */
+#define INFINIPATH_SERDC0_TXIDLE      0xF000ULL
+/* rx detect enables (per lane) */
+#define INFINIPATH_SERDC0_RXDETECT_EN 0xF0000ULL
+/* L1 Power down; use with RXDETECT, Otherwise not used on IB side */
+#define INFINIPATH_SERDC0_L1PWR_DN	 0xF0ULL
 
 /* kr_xgxsconfig bits */
 #define INFINIPATH_XGXS_RESET          0x7ULL
@@ -390,12 +396,13 @@ struct ipath_kregs {
 	ipath_kreg kr_txintmemsize;
 	ipath_kreg kr_xgxsconfig;
 	ipath_kreg kr_ibpllcfg;
-	/* use these two (and the following N ports) only with ipath_k*_kreg64_port();
-	 * not *kreg64() */
+	/* use these two (and the following N ports) only with
+	 * ipath_k*_kreg64_port(); not *kreg64() */
 	ipath_kreg kr_rcvhdraddr;
 	ipath_kreg kr_rcvhdrtailaddr;
 
-	/* remaining registers are not present on all types of infinipath chips  */
+	/* remaining registers are not present on all types of infinipath
+	   chips  */
 	ipath_kreg kr_rcvpktledcnt;
 	ipath_kreg kr_pcierbuftestreg0;
 	ipath_kreg kr_pcierbuftestreg1;

drivers/infiniband/hw/ipath/ipath_ruc.c

@@ -531,19 +531,12 @@ int ipath_post_rc_send(struct ipath_qp *qp, struct ib_send_wr *wr)
 	}
 	wqe->wr.num_sge = j;
 	qp->s_head = next;
-	/*
-	 * Wake up the send tasklet if the QP is not waiting
-	 * for an RNR timeout.
-	 */
-	next = qp->s_rnr_timeout;
 	spin_unlock_irqrestore(&qp->s_lock, flags);
 
-	if (next == 0) {
-		if (qp->ibqp.qp_type == IB_QPT_UC)
-			ipath_do_uc_send((unsigned long) qp);
-		else
-			ipath_do_rc_send((unsigned long) qp);
-	}
+	if (qp->ibqp.qp_type == IB_QPT_UC)
+		ipath_do_uc_send((unsigned long) qp);
+	else
+		ipath_do_rc_send((unsigned long) qp);
 
 	ret = 0;
 

drivers/infiniband/hw/ipath/ipath_sysfs.c

@@ -711,10 +711,22 @@ static struct attribute_group dev_attr_group = {
  * enters diag mode.  A device reset is quite likely to crash the
  * machine entirely, so we don't want to normally make it
  * available.
+ *
+ * Called with ipath_mutex held.
  */
 int ipath_expose_reset(struct device *dev)
 {
-	return device_create_file(dev, &dev_attr_reset);
+	static int exposed;
+	int ret;
+
+	if (!exposed) {
+		ret = device_create_file(dev, &dev_attr_reset);
+		exposed = 1;
+	}
+	else
+		ret = 0;
+
+	return ret;
 }
 
 int ipath_driver_create_group(struct device_driver *drv)

drivers/infiniband/hw/ipath/ipath_ud.c

@@ -46,8 +46,10 @@
  * This is called from ipath_post_ud_send() to forward a WQE addressed
  * to the same HCA.
  */
-static void ipath_ud_loopback(struct ipath_qp *sqp, struct ipath_sge_state *ss,
-			      u32 length, struct ib_send_wr *wr, struct ib_wc *wc)
+static void ipath_ud_loopback(struct ipath_qp *sqp,
+			      struct ipath_sge_state *ss,
+			      u32 length, struct ib_send_wr *wr,
+			      struct ib_wc *wc)
 {
 	struct ipath_ibdev *dev = to_idev(sqp->ibqp.device);
 	struct ipath_qp *qp;

drivers/infiniband/hw/ipath/ipath_verbs.c

@@ -449,7 +449,6 @@ static void ipath_ib_timer(void *arg)
 {
 	struct ipath_ibdev *dev = (struct ipath_ibdev *) arg;
 	struct ipath_qp *resend = NULL;
-	struct ipath_qp *rnr = NULL;
 	struct list_head *last;
 	struct ipath_qp *qp;
 	unsigned long flags;
@@ -465,32 +464,18 @@ static void ipath_ib_timer(void *arg)
 	last = &dev->pending[dev->pending_index];
 	while (!list_empty(last)) {
 		qp = list_entry(last->next, struct ipath_qp, timerwait);
-		if (last->next == LIST_POISON1 ||
-		    last->next != &qp->timerwait ||
-		    qp->timerwait.prev != last) {
-			INIT_LIST_HEAD(last);
-		} else {
-			list_del(&qp->timerwait);
-			qp->timerwait.prev = (struct list_head *) resend;
-			resend = qp;
-			atomic_inc(&qp->refcount);
-		}
+		list_del(&qp->timerwait);
+		qp->timer_next = resend;
+		resend = qp;
+		atomic_inc(&qp->refcount);
 	}
 	last = &dev->rnrwait;
 	if (!list_empty(last)) {
 		qp = list_entry(last->next, struct ipath_qp, timerwait);
 		if (--qp->s_rnr_timeout == 0) {
 			do {
-				if (last->next == LIST_POISON1 ||
-				    last->next != &qp->timerwait ||
-				    qp->timerwait.prev != last) {
-					INIT_LIST_HEAD(last);
-					break;
-				}
 				list_del(&qp->timerwait);
-				qp->timerwait.prev =
-					(struct list_head *) rnr;
-				rnr = qp;
+				tasklet_hi_schedule(&qp->s_task);
 				if (list_empty(last))
 					break;
 				qp = list_entry(last->next, struct ipath_qp,
@@ -530,8 +515,7 @@ static void ipath_ib_timer(void *arg)
 	spin_unlock_irqrestore(&dev->pending_lock, flags);
 
 	/* XXX What if timer fires again while this is running? */
-	for (qp = resend; qp != NULL;
-	     qp = (struct ipath_qp *) qp->timerwait.prev) {
+	for (qp = resend; qp != NULL; qp = qp->timer_next) {
 		struct ib_wc wc;
 
 		spin_lock_irqsave(&qp->s_lock, flags);
@@ -545,9 +529,6 @@ static void ipath_ib_timer(void *arg)
 		if (atomic_dec_and_test(&qp->refcount))
 			wake_up(&qp->wait);
 	}
-	for (qp = rnr; qp != NULL;
-	     qp = (struct ipath_qp *) qp->timerwait.prev)
-		tasklet_hi_schedule(&qp->s_task);
 }
 
 /**
@@ -556,9 +537,9 @@ static void ipath_ib_timer(void *arg)
  *
  * This is called from ipath_intr() at interrupt level when a PIO buffer is
  * available after ipath_verbs_send() returned an error that no buffers were
- * available.  Return 0 if we consumed all the PIO buffers and we still have
+ * available.  Return 1 if we consumed all the PIO buffers and we still have
  * QPs waiting for buffers (for now, just do a tasklet_hi_schedule and
- * return one).
+ * return zero).
  */
 static int ipath_ib_piobufavail(void *arg)
 {
@@ -579,7 +560,7 @@ static int ipath_ib_piobufavail(void *arg)
 	spin_unlock_irqrestore(&dev->pending_lock, flags);
 
 bail:
-	return 1;
+	return 0;
 }
 
 static int ipath_query_device(struct ib_device *ibdev,
@@ -1159,7 +1140,7 @@ static ssize_t show_stats(struct class_device *cdev, char *buf)
 
 	len = sprintf(buf,
 		      "RC resends  %d\n"
-		      "RC QACKs    %d\n"
+		      "RC no QACK  %d\n"
 		      "RC ACKs     %d\n"
 		      "RC SEQ NAKs %d\n"
 		      "RC RDMA seq %d\n"

drivers/infiniband/hw/ipath/ipath_verbs.h

@@ -282,7 +282,8 @@ struct ipath_srq {
  */
 struct ipath_qp {
 	struct ib_qp ibqp;
-	struct ipath_qp *next;	/* link list for QPN hash table */
+	struct ipath_qp *next;		/* link list for QPN hash table */
+	struct ipath_qp *timer_next;	/* link list for ipath_ib_timer() */
 	struct list_head piowait;	/* link for wait PIO buf */
 	struct list_head timerwait;	/* link for waiting for timeouts */
 	struct ib_ah_attr remote_ah_attr;

drivers/infiniband/hw/ipath/ips_common.h

@@ -95,7 +95,7 @@ struct ether_header {
 	__u8 seq_num;
 	__le32 len;
 	/* MUST be of word size due to PIO write requirements */
-	__u32 csum;
+	__le32 csum;
 	__le16 csum_offset;
 	__le16 flags;
 	__u16 first_2_bytes;

drivers/infiniband/hw/mthca/mthca_provider.c

@@ -306,7 +306,7 @@ static int mthca_query_gid(struct ib_device *ibdev, u8 port,
 		goto out;
 	}
 
-	memcpy(gid->raw + 8, out_mad->data + (index % 8) * 16, 8);
+	memcpy(gid->raw + 8, out_mad->data + (index % 8) * 8, 8);
 
  out:
 	kfree(in_mad);

drivers/input/evdev.c

@@ -403,6 +403,27 @@ static long evdev_ioctl_handler(struct file *file, unsigned int cmd,
 		case EVIOCGID:
 			if (copy_to_user(p, &dev->id, sizeof(struct input_id)))
 				return -EFAULT;
+			return 0;
+
+		case EVIOCGREP:
+			if (!test_bit(EV_REP, dev->evbit))
+				return -ENOSYS;
+			if (put_user(dev->rep[REP_DELAY], ip))
+				return -EFAULT;
+			if (put_user(dev->rep[REP_PERIOD], ip + 1))
+				return -EFAULT;
+			return 0;
+
+		case EVIOCSREP:
+			if (!test_bit(EV_REP, dev->evbit))
+				return -ENOSYS;
+			if (get_user(u, ip))
+				return -EFAULT;
+			if (get_user(v, ip + 1))
+				return -EFAULT;
+
+			input_event(dev, EV_REP, REP_DELAY, u);
+			input_event(dev, EV_REP, REP_PERIOD, v);
 
 			return 0;
 

drivers/input/input.c

@@ -155,6 +155,9 @@ void input_event(struct input_dev *dev, unsigned int type, unsigned int code, in
 			if (code > SND_MAX || !test_bit(code, dev->sndbit))
 				return;
 
+			if (!!test_bit(code, dev->snd) != !!value)
+				change_bit(code, dev->snd);
+
 			if (dev->event) dev->event(dev, type, code, value);
 
 			break;
@@ -286,19 +289,19 @@ static struct input_device_id *input_match_device(struct input_device_id *id, st
 	for (; id->flags || id->driver_info; id++) {
 
 		if (id->flags & INPUT_DEVICE_ID_MATCH_BUS)
-			if (id->id.bustype != dev->id.bustype)
+			if (id->bustype != dev->id.bustype)
 				continue;
 
 		if (id->flags & INPUT_DEVICE_ID_MATCH_VENDOR)
-			if (id->id.vendor != dev->id.vendor)
+			if (id->vendor != dev->id.vendor)
 				continue;
 
 		if (id->flags & INPUT_DEVICE_ID_MATCH_PRODUCT)
-			if (id->id.product != dev->id.product)
+			if (id->product != dev->id.product)
 				continue;
 
 		if (id->flags & INPUT_DEVICE_ID_MATCH_VERSION)
-			if (id->id.version != dev->id.version)
+			if (id->version != dev->id.version)
 				continue;
 
 		MATCH_BIT(evbit,  EV_MAX);

drivers/input/keyboard/spitzkbd.c

@@ -53,8 +53,8 @@ static unsigned char spitzkbd_keycode[NR_SCANCODES] = {
 	KEY_LEFTCTRL, KEY_1, KEY_3, KEY_5, KEY_6, KEY_7, KEY_9, KEY_0, KEY_BACKSPACE, SPITZ_KEY_EXOK, SPITZ_KEY_EXCANCEL, 0, 0, 0, 0, 0,  /* 1-16 */
 	0, KEY_2, KEY_4, KEY_R, KEY_Y, KEY_8, KEY_I, KEY_O, KEY_P, SPITZ_KEY_EXJOGDOWN, SPITZ_KEY_EXJOGUP, 0, 0, 0, 0, 0, /* 17-32 */
 	KEY_TAB, KEY_Q, KEY_E, KEY_T, KEY_G, KEY_U, KEY_J, KEY_K, 0, 0, 0, 0, 0, 0, 0, 0,                                 /* 33-48 */
-	SPITZ_KEY_CALENDER, KEY_W, KEY_S, KEY_F, KEY_V, KEY_H, KEY_M, KEY_L, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0,         /* 49-64 */
-	SPITZ_KEY_ADDRESS, KEY_A, KEY_D, KEY_C, KEY_B, KEY_N, KEY_DOT, 0, KEY_ENTER, KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0,	  /* 65-80 */
+	SPITZ_KEY_ADDRESS, KEY_W, KEY_S, KEY_F, KEY_V, KEY_H, KEY_M, KEY_L, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0,         /* 49-64 */
+	SPITZ_KEY_CALENDER, KEY_A, KEY_D, KEY_C, KEY_B, KEY_N, KEY_DOT, 0, KEY_ENTER, KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0,	  /* 65-80 */
 	SPITZ_KEY_MAIL, KEY_Z, KEY_X, KEY_MINUS, KEY_SPACE, KEY_COMMA, 0, KEY_UP, 0, 0, SPITZ_KEY_FN, 0, 0, 0, 0, 0,      /* 81-96 */
 	KEY_SYSRQ, SPITZ_KEY_JAP1, SPITZ_KEY_JAP2, SPITZ_KEY_CANCEL, SPITZ_KEY_OK, SPITZ_KEY_MENU, KEY_LEFT, KEY_DOWN, KEY_RIGHT, 0, 0, 0, 0, 0, 0, 0  /* 97-112 */
 };

drivers/input/misc/wistron_btns.c

@@ -273,6 +273,18 @@ static struct key_entry keymap_fs_amilo_pro_v2000[] = {
 	{ KE_END,  0 }
 };
 
+static struct key_entry keymap_fujitsu_n3510[] = {
+	{ KE_KEY, 0x11, KEY_PROG1 },
+	{ KE_KEY, 0x12, KEY_PROG2 },
+	{ KE_KEY, 0x36, KEY_WWW },
+	{ KE_KEY, 0x31, KEY_MAIL },
+	{ KE_KEY, 0x71, KEY_STOPCD },
+	{ KE_KEY, 0x72, KEY_PLAYPAUSE },
+	{ KE_KEY, 0x74, KEY_REWIND },
+	{ KE_KEY, 0x78, KEY_FORWARD },
+	{ KE_END, 0 }
+};
+
 static struct key_entry keymap_wistron_ms2141[] = {
 	{ KE_KEY,  0x11, KEY_PROG1 },
 	{ KE_KEY,  0x12, KEY_PROG2 },
@@ -321,6 +333,24 @@ static struct dmi_system_id dmi_ids[] = {
 		},
 		.driver_data = keymap_fs_amilo_pro_v2000
 	},
+	{
+		.callback = dmi_matched,
+		.ident = "Fujitsu-Siemens Amilo M7400",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO M        "),
+		},
+		.driver_data = keymap_fs_amilo_pro_v2000
+	},
+	{
+		.callback = dmi_matched,
+		.ident = "Fujitsu N3510",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "N3510"),
+		},
+		.driver_data = keymap_fujitsu_n3510
+	},
 	{
 		.callback = dmi_matched,
 		.ident = "Acer Aspire 1500",

drivers/input/mouse/psmouse-base.c

@@ -302,8 +302,10 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
  * Check if this is a new device announcement (0xAA 0x00)
  */
 	if (unlikely(psmouse->packet[0] == PSMOUSE_RET_BAT && psmouse->pktcnt <= 2)) {
-		if (psmouse->pktcnt == 1)
+		if (psmouse->pktcnt == 1) {
+			psmouse->last = jiffies;
 			goto out;
+		}
 
 		if (psmouse->packet[1] == PSMOUSE_RET_ID) {
 			__psmouse_set_state(psmouse, PSMOUSE_IGNORE);

drivers/input/touchscreen/ads7846.c

@@ -2,6 +2,8 @@
  * ADS7846 based touchscreen and sensor driver
  *
  * Copyright (c) 2005 David Brownell
+ * Copyright (c) 2006 Nokia Corporation
+ * Various changes: Imre Deak <imre.deak@nokia.com>
  *
  * Using code from:
  *  - corgi_ts.c
@@ -34,17 +36,25 @@
 
 
 /*
- * This code has been lightly tested on an ads7846.
+ * This code has been tested on an ads7846 / N770 device.
  * Support for ads7843 and ads7845 has only been stubbed in.
  *
- * Not yet done:  investigate the values reported.  Are x/y/pressure
- * event values sane enough for X11?  How accurate are the temperature
- * and voltage readings?  (System-specific calibration should support
+ * Not yet done:  How accurate are the temperature and voltage
+ * readings? (System-specific calibration should support
  * accuracy of 0.3 degrees C; otherwise it's 2.0 degrees.)
  *
+ * IRQ handling needs a workaround because of a shortcoming in handling
+ * edge triggered IRQs on some platforms like the OMAP1/2. These
+ * platforms don't handle the ARM lazy IRQ disabling properly, thus we
+ * have to maintain our own SW IRQ disabled status. This should be
+ * removed as soon as the affected platform's IRQ handling is fixed.
+ *
  * app note sbaa036 talks in more detail about accurate sampling...
  * that ought to help in situations like LCDs inducing noise (which
  * can also be helped by using synch signals) and more generally.
+ * This driver tries to utilize the measures described in the app
+ * note. The strength of filtering can be set in the board-* specific
+ * files.
  */
 
 #define	TS_POLL_PERIOD	msecs_to_jiffies(10)
@@ -61,6 +71,7 @@ struct ts_event {
 	__be16 x;
 	__be16 y;
 	__be16 z1, z2;
+	int    ignore;
 };
 
 struct ads7846 {
@@ -71,12 +82,23 @@ struct ads7846 {
 	u16			model;
 	u16			vref_delay_usecs;
 	u16			x_plate_ohms;
+	u16			pressure_max;
 
-	u8			read_x, read_y, read_z1, read_z2;
+	u8			read_x, read_y, read_z1, read_z2, pwrdown;
+	u16			dummy;		/* for the pwrdown read */
 	struct ts_event		tc;
 
-	struct spi_transfer	xfer[8];
-	struct spi_message	msg;
+	struct spi_transfer	xfer[10];
+	struct spi_message	msg[5];
+	struct spi_message	*last_msg;
+	int			msg_idx;
+	int			read_cnt;
+	int			read_rep;
+	int			last_read;
+
+	u16			debounce_max;
+	u16			debounce_tol;
+	u16			debounce_rep;
 
 	spinlock_t		lock;
 	struct timer_list	timer;		/* P: lock */
@@ -84,6 +106,9 @@ struct ads7846 {
 	unsigned		pending:1;	/* P: lock */
 // FIXME remove "irq_disabled"
 	unsigned		irq_disabled:1;	/* P: lock */
+	unsigned		disabled:1;
+
+	int			(*get_pendown_state)(void);
 };
 
 /* leave chip selected when we're done, for quicker re-select? */
@@ -125,7 +150,9 @@ struct ads7846 {
 #define	READ_Y	(READ_12BIT_DFR(y)  | ADS_PD10_ADC_ON)
 #define	READ_Z1	(READ_12BIT_DFR(z1) | ADS_PD10_ADC_ON)
 #define	READ_Z2	(READ_12BIT_DFR(z2) | ADS_PD10_ADC_ON)
-#define	READ_X	(READ_12BIT_DFR(x)  | ADS_PD10_PDOWN)	/* LAST */
+
+#define	READ_X	(READ_12BIT_DFR(x)  | ADS_PD10_ADC_ON)
+#define	PWRDOWN	(READ_12BIT_DFR(y)  | ADS_PD10_PDOWN)	/* LAST */
 
 /* single-ended samples need to first power up reference voltage;
  * we leave both ADC and VREF powered
@@ -152,6 +179,15 @@ struct ser_req {
 	struct spi_transfer	xfer[6];
 };
 
+static void ads7846_enable(struct ads7846 *ts);
+static void ads7846_disable(struct ads7846 *ts);
+
+static int device_suspended(struct device *dev)
+{
+	struct ads7846 *ts = dev_get_drvdata(dev);
+	return dev->power.power_state.event != PM_EVENT_ON || ts->disabled;
+}
+
 static int ads7846_read12_ser(struct device *dev, unsigned command)
 {
 	struct spi_device	*spi = to_spi_device(dev);
@@ -164,7 +200,7 @@ static int ads7846_read12_ser(struct device *dev, unsigned command)
 	if (!req)
 		return -ENOMEM;
 
-	INIT_LIST_HEAD(&req->msg.transfers);
+	spi_message_init(&req->msg);
 
 	/* activate reference, so it has time to settle; */
 	req->ref_on = REF_ON;
@@ -204,8 +240,10 @@ static int ads7846_read12_ser(struct device *dev, unsigned command)
 	for (i = 0; i < 6; i++)
 		spi_message_add_tail(&req->xfer[i], &req->msg);
 
+	ts->irq_disabled = 1;
 	disable_irq(spi->irq);
 	status = spi_sync(spi, &req->msg);
+	ts->irq_disabled = 0;
 	enable_irq(spi->irq);
 
 	if (req->msg.status)
@@ -233,6 +271,52 @@ SHOW(temp1)
 SHOW(vaux)
 SHOW(vbatt)
 
+static int is_pen_down(struct device *dev)
+{
+	struct ads7846		*ts = dev_get_drvdata(dev);
+
+	return ts->pendown;
+}
+
+static ssize_t ads7846_pen_down_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%u\n", is_pen_down(dev));
+}
+
+static DEVICE_ATTR(pen_down, S_IRUGO, ads7846_pen_down_show, NULL);
+
+static ssize_t ads7846_disable_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct ads7846	*ts = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", ts->disabled);
+}
+
+static ssize_t ads7846_disable_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	struct ads7846 *ts = dev_get_drvdata(dev);
+	char *endp;
+	int i;
+
+	i = simple_strtoul(buf, &endp, 10);
+	spin_lock_irq(&ts->lock);
+
+	if (i)
+		ads7846_disable(ts);
+	else
+		ads7846_enable(ts);
+
+	spin_unlock_irq(&ts->lock);
+
+	return count;
+}
+
+static DEVICE_ATTR(disable, 0664, ads7846_disable_show, ads7846_disable_store);
+
 /*--------------------------------------------------------------------------*/
 
 /*
@@ -264,7 +348,7 @@ static void ads7846_rx(void *ads)
 	if (x == MAX_12BIT)
 		x = 0;
 
-	if (x && z1 && ts->spi->dev.power.power_state.event == PM_EVENT_ON) {
+	if (likely(x && z1 && !device_suspended(&ts->spi->dev))) {
 		/* compute touch pressure resistance using equation #2 */
 		Rt = z2;
 		Rt -= z1;
@@ -275,6 +359,14 @@ static void ads7846_rx(void *ads)
 	} else
 		Rt = 0;
 
+	/* Sample found inconsistent by debouncing or pressure is beyond
+	* the maximum. Don't report it to user space, repeat at least
+	* once more the measurement */
+	if (ts->tc.ignore || Rt > ts->pressure_max) {
+		mod_timer(&ts->timer, jiffies + TS_POLL_PERIOD);
+		return;
+	}
+
 	/* NOTE:  "pendown" is inferred from pressure; we don't rely on
 	 * being able to check nPENIRQ status, or "friendly" trigger modes
 	 * (both-edges is much better than just-falling or low-level).
@@ -296,11 +388,13 @@ static void ads7846_rx(void *ads)
 	if (Rt) {
 		input_report_abs(input_dev, ABS_X, x);
 		input_report_abs(input_dev, ABS_Y, y);
-		input_report_abs(input_dev, ABS_PRESSURE, Rt);
 		sync = 1;
 	}
-	if (sync)
+
+	if (sync) {
+		input_report_abs(input_dev, ABS_PRESSURE, Rt);
 		input_sync(input_dev);
+	}
 
 #ifdef	VERBOSE
 	if (Rt || ts->pendown)
@@ -308,80 +402,138 @@ static void ads7846_rx(void *ads)
 			x, y, Rt, Rt ? "" : " UP");
 #endif
 
-	/* don't retrigger while we're suspended */
 	spin_lock_irqsave(&ts->lock, flags);
 
 	ts->pendown = (Rt != 0);
-	ts->pending = 0;
+	mod_timer(&ts->timer, jiffies + TS_POLL_PERIOD);
 
-	if (ts->spi->dev.power.power_state.event == PM_EVENT_ON) {
-		if (ts->pendown)
-			mod_timer(&ts->timer, jiffies + TS_POLL_PERIOD);
-		else if (ts->irq_disabled) {
-			ts->irq_disabled = 0;
-			enable_irq(ts->spi->irq);
+	spin_unlock_irqrestore(&ts->lock, flags);
+}
+
+static void ads7846_debounce(void *ads)
+{
+	struct ads7846		*ts = ads;
+	struct spi_message	*m;
+	struct spi_transfer	*t;
+	int			val;
+	int			status;
+
+	m = &ts->msg[ts->msg_idx];
+	t = list_entry(m->transfers.prev, struct spi_transfer, transfer_list);
+	val = (*(u16 *)t->rx_buf) >> 3;
+	if (!ts->read_cnt || (abs(ts->last_read - val) > ts->debounce_tol)) {
+		/* Repeat it, if this was the first read or the read
+		 * wasn't consistent enough. */
+		if (ts->read_cnt < ts->debounce_max) {
+			ts->last_read = val;
+			ts->read_cnt++;
+		} else {
+			/* Maximum number of debouncing reached and still
+			 * not enough number of consistent readings. Abort
+			 * the whole sample, repeat it in the next sampling
+			 * period.
+			 */
+			ts->tc.ignore = 1;
+			ts->read_cnt = 0;
+			/* Last message will contain ads7846_rx() as the
+			 * completion function.
+			 */
+			m = ts->last_msg;
 		}
+		/* Start over collecting consistent readings. */
+		ts->read_rep = 0;
+	} else {
+		if (++ts->read_rep > ts->debounce_rep) {
+			/* Got a good reading for this coordinate,
+			 * go for the next one. */
+			ts->tc.ignore = 0;
+			ts->msg_idx++;
+			ts->read_cnt = 0;
+			ts->read_rep = 0;
+			m++;
+		} else
+			/* Read more values that are consistent. */
+			ts->read_cnt++;
 	}
-
-	spin_unlock_irqrestore(&ts->lock, flags);
+	status = spi_async(ts->spi, m);
+	if (status)
+		dev_err(&ts->spi->dev, "spi_async --> %d\n",
+				status);
 }
 
 static void ads7846_timer(unsigned long handle)
 {
 	struct ads7846	*ts = (void *)handle;
 	int		status = 0;
-	unsigned long	flags;
+
+	spin_lock_irq(&ts->lock);
+
+	if (unlikely(ts->msg_idx && !ts->pendown)) {
+		/* measurment cycle ended */
+		if (!device_suspended(&ts->spi->dev)) {
+			ts->irq_disabled = 0;
+			enable_irq(ts->spi->irq);
+		}
+		ts->pending = 0;
+		ts->msg_idx = 0;
+	} else {
+		/* pen is still down, continue with the measurement */
+		ts->msg_idx = 0;
+		status = spi_async(ts->spi, &ts->msg[0]);
+		if (status)
+			dev_err(&ts->spi->dev, "spi_async --> %d\n", status);
+	}
+
+	spin_unlock_irq(&ts->lock);
+}
+
+static irqreturn_t ads7846_irq(int irq, void *handle, struct pt_regs *regs)
+{
+	struct ads7846 *ts = handle;
+	unsigned long flags;
 
 	spin_lock_irqsave(&ts->lock, flags);
-	if (!ts->pending) {
-		ts->pending = 1;
+	if (likely(ts->get_pendown_state())) {
 		if (!ts->irq_disabled) {
+			/* REVISIT irq logic for many ARM chips has cloned a
+			 * bug wherein disabling an irq in its handler won't
+			 * work;(it's disabled lazily, and too late to work.
+			 * until all their irq logic is fixed, we must shadow
+			 * that state here.
+			 */
 			ts->irq_disabled = 1;
 			disable_irq(ts->spi->irq);
+			ts->pending = 1;
+			mod_timer(&ts->timer, jiffies);
 		}
-		status = spi_async(ts->spi, &ts->msg);
-		if (status)
-			dev_err(&ts->spi->dev, "spi_async --> %d\n",
-					status);
 	}
 	spin_unlock_irqrestore(&ts->lock, flags);
-}
 
-static irqreturn_t ads7846_irq(int irq, void *handle, struct pt_regs *regs)
-{
-	ads7846_timer((unsigned long) handle);
 	return IRQ_HANDLED;
 }
 
 /*--------------------------------------------------------------------------*/
 
-static int
-ads7846_suspend(struct spi_device *spi, pm_message_t message)
+/* Must be called with ts->lock held */
+static void ads7846_disable(struct ads7846 *ts)
 {
-	struct ads7846 *ts = dev_get_drvdata(&spi->dev);
-	unsigned long	flags;
+	if (ts->disabled)
+		return;
 
-	spin_lock_irqsave(&ts->lock, flags);
-
-	spi->dev.power.power_state = message;
+	ts->disabled = 1;
 
 	/* are we waiting for IRQ, or polling? */
-	if (!ts->pendown) {
-		if (!ts->irq_disabled) {
-			ts->irq_disabled = 1;
-			disable_irq(ts->spi->irq);
-		}
+	if (!ts->pending) {
+		ts->irq_disabled = 1;
+		disable_irq(ts->spi->irq);
 	} else {
-		/* polling; force a final SPI completion;
-		 * that will clean things up neatly
+		/* the timer will run at least once more, and
+		 * leave everything in a clean state, IRQ disabled
 		 */
-		if (!ts->pending)
-			mod_timer(&ts->timer, jiffies);
-
-		while (ts->pendown || ts->pending) {
-			spin_unlock_irqrestore(&ts->lock, flags);
-			udelay(10);
-			spin_lock_irqsave(&ts->lock, flags);
+		while (ts->pending) {
+			spin_unlock_irq(&ts->lock);
+			msleep(1);
+			spin_lock_irq(&ts->lock);
 		}
 	}
 
@@ -389,17 +541,45 @@ ads7846_suspend(struct spi_device *spi, pm_message_t message)
 	 * leave it that way after every request
 	 */
 
-	spin_unlock_irqrestore(&ts->lock, flags);
+}
+
+/* Must be called with ts->lock held */
+static void ads7846_enable(struct ads7846 *ts)
+{
+	if (!ts->disabled)
+		return;
+
+	ts->disabled = 0;
+	ts->irq_disabled = 0;
+	enable_irq(ts->spi->irq);
+}
+
+static int ads7846_suspend(struct spi_device *spi, pm_message_t message)
+{
+	struct ads7846 *ts = dev_get_drvdata(&spi->dev);
+
+	spin_lock_irq(&ts->lock);
+
+	spi->dev.power.power_state = message;
+	ads7846_disable(ts);
+
+	spin_unlock_irq(&ts->lock);
+
 	return 0;
+
 }
 
 static int ads7846_resume(struct spi_device *spi)
 {
 	struct ads7846 *ts = dev_get_drvdata(&spi->dev);
 
-	ts->irq_disabled = 0;
-	enable_irq(ts->spi->irq);
+	spin_lock_irq(&ts->lock);
+
 	spi->dev.power.power_state = PMSG_ON;
+	ads7846_enable(ts);
+
+	spin_unlock_irq(&ts->lock);
+
 	return 0;
 }
 
@@ -408,6 +588,7 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	struct ads7846			*ts;
 	struct input_dev		*input_dev;
 	struct ads7846_platform_data	*pdata = spi->dev.platform_data;
+	struct spi_message		*m;
 	struct spi_transfer		*x;
 	int				err;
 
@@ -428,6 +609,11 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		return -EINVAL;
 	}
 
+	if (pdata->get_pendown_state == NULL) {
+		dev_dbg(&spi->dev, "no get_pendown_state function?\n");
+		return -EINVAL;
+	}
+
 	/* We'd set the wordsize to 12 bits ... except that some controllers
 	 * will then treat the 8 bit command words as 12 bits (and drop the
 	 * four MSBs of the 12 bit result).  Result: inputs must be shifted
@@ -451,9 +637,21 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	ts->timer.data = (unsigned long) ts;
 	ts->timer.function = ads7846_timer;
 
+	spin_lock_init(&ts->lock);
+
 	ts->model = pdata->model ? : 7846;
 	ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100;
 	ts->x_plate_ohms = pdata->x_plate_ohms ? : 400;
+	ts->pressure_max = pdata->pressure_max ? : ~0;
+	if (pdata->debounce_max) {
+		ts->debounce_max = pdata->debounce_max;
+		ts->debounce_tol = pdata->debounce_tol;
+		ts->debounce_rep = pdata->debounce_rep;
+		if (ts->debounce_rep > ts->debounce_max + 1)
+			ts->debounce_rep = ts->debounce_max - 1;
+	} else
+		ts->debounce_tol = ~0;
+	ts->get_pendown_state = pdata->get_pendown_state;
 
 	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", spi->dev.bus_id);
 
@@ -477,60 +675,100 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	/* set up the transfers to read touchscreen state; this assumes we
 	 * use formula #2 for pressure, not #3.
 	 */
-	INIT_LIST_HEAD(&ts->msg.transfers);
+	m = &ts->msg[0];
 	x = ts->xfer;
 
+	spi_message_init(m);
+
 	/* y- still on; turn on only y+ (and ADC) */
 	ts->read_y = READ_Y;
 	x->tx_buf = &ts->read_y;
 	x->len = 1;
-	spi_message_add_tail(x, &ts->msg);
+	spi_message_add_tail(x, m);
 
 	x++;
 	x->rx_buf = &ts->tc.y;
 	x->len = 2;
-	spi_message_add_tail(x, &ts->msg);
+	spi_message_add_tail(x, m);
+
+	m->complete = ads7846_debounce;
+	m->context = ts;
+
+	m++;
+	spi_message_init(m);
+
+	/* turn y- off, x+ on, then leave in lowpower */
+	x++;
+	ts->read_x = READ_X;
+	x->tx_buf = &ts->read_x;
+	x->len = 1;
+	spi_message_add_tail(x, m);
+
+	x++;
+	x->rx_buf = &ts->tc.x;
+	x->len = 2;
+	spi_message_add_tail(x, m);
+
+	m->complete = ads7846_debounce;
+	m->context = ts;
 
 	/* turn y+ off, x- on; we'll use formula #2 */
 	if (ts->model == 7846) {
+		m++;
+		spi_message_init(m);
+
 		x++;
 		ts->read_z1 = READ_Z1;
 		x->tx_buf = &ts->read_z1;
 		x->len = 1;
-		spi_message_add_tail(x, &ts->msg);
+		spi_message_add_tail(x, m);
 
 		x++;
 		x->rx_buf = &ts->tc.z1;
 		x->len = 2;
-		spi_message_add_tail(x, &ts->msg);
+		spi_message_add_tail(x, m);
+
+		m->complete = ads7846_debounce;
+		m->context = ts;
+
+		m++;
+		spi_message_init(m);
 
 		x++;
 		ts->read_z2 = READ_Z2;
 		x->tx_buf = &ts->read_z2;
 		x->len = 1;
-		spi_message_add_tail(x, &ts->msg);
+		spi_message_add_tail(x, m);
 
 		x++;
 		x->rx_buf = &ts->tc.z2;
 		x->len = 2;
-		spi_message_add_tail(x, &ts->msg);
+		spi_message_add_tail(x, m);
+
+		m->complete = ads7846_debounce;
+		m->context = ts;
 	}
 
-	/* turn y- off, x+ on, then leave in lowpower */
+	/* power down */
+	m++;
+	spi_message_init(m);
+
 	x++;
-	ts->read_x = READ_X;
-	x->tx_buf = &ts->read_x;
+	ts->pwrdown = PWRDOWN;
+	x->tx_buf = &ts->pwrdown;
 	x->len = 1;
-	spi_message_add_tail(x, &ts->msg);
+	spi_message_add_tail(x, m);
 
 	x++;
-	x->rx_buf = &ts->tc.x;
+	x->rx_buf = &ts->dummy;
 	x->len = 2;
 	CS_CHANGE(*x);
-	spi_message_add_tail(x, &ts->msg);
+	spi_message_add_tail(x, m);
 
-	ts->msg.complete = ads7846_rx;
-	ts->msg.context = ts;
+	m->complete = ads7846_rx;
+	m->context = ts;
+
+	ts->last_msg = m;
 
 	if (request_irq(spi->irq, ads7846_irq,
 			SA_SAMPLE_RANDOM | SA_TRIGGER_FALLING,
@@ -559,13 +797,27 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		device_create_file(&spi->dev, &dev_attr_vbatt);
 	device_create_file(&spi->dev, &dev_attr_vaux);
 
+	device_create_file(&spi->dev, &dev_attr_pen_down);
+
+	device_create_file(&spi->dev, &dev_attr_disable);
+
 	err = input_register_device(input_dev);
 	if (err)
-		goto err_free_irq;
+		goto err_remove_attr;
 
 	return 0;
 
- err_free_irq:
+ err_remove_attr:
+	device_remove_file(&spi->dev, &dev_attr_disable);
+	device_remove_file(&spi->dev, &dev_attr_pen_down);
+	if (ts->model == 7846) {
+		device_remove_file(&spi->dev, &dev_attr_temp1);
+		device_remove_file(&spi->dev, &dev_attr_temp0);
+	}
+	if (ts->model != 7845)
+		device_remove_file(&spi->dev, &dev_attr_vbatt);
+	device_remove_file(&spi->dev, &dev_attr_vaux);
+
 	free_irq(spi->irq, ts);
  err_free_mem:
 	input_free_device(input_dev);
@@ -577,20 +829,24 @@ static int __devexit ads7846_remove(struct spi_device *spi)
 {
 	struct ads7846		*ts = dev_get_drvdata(&spi->dev);
 
+	input_unregister_device(ts->input);
+
 	ads7846_suspend(spi, PMSG_SUSPEND);
-	free_irq(ts->spi->irq, ts);
-	if (ts->irq_disabled)
-		enable_irq(ts->spi->irq);
 
+	device_remove_file(&spi->dev, &dev_attr_disable);
+	device_remove_file(&spi->dev, &dev_attr_pen_down);
 	if (ts->model == 7846) {
-		device_remove_file(&spi->dev, &dev_attr_temp0);
 		device_remove_file(&spi->dev, &dev_attr_temp1);
+		device_remove_file(&spi->dev, &dev_attr_temp0);
 	}
 	if (ts->model != 7845)
 		device_remove_file(&spi->dev, &dev_attr_vbatt);
 	device_remove_file(&spi->dev, &dev_attr_vaux);
 
-	input_unregister_device(ts->input);
+	free_irq(ts->spi->irq, ts);
+	/* suspend left the IRQ disabled */
+	enable_irq(ts->spi->irq);
+
 	kfree(ts);
 
 	dev_dbg(&spi->dev, "unregistered touchscreen\n");

drivers/input/touchscreen/corgi_ts.c

@@ -17,7 +17,7 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/slab.h>
-#include <asm/irq.h>
+//#include <asm/irq.h>
 
 #include <asm/arch/sharpsl.h>
 #include <asm/arch/hardware.h>

drivers/md/raid1.c

@@ -315,10 +315,11 @@ static int raid1_end_write_request(struct bio *bio, unsigned int bytes_done, int
 		if (r1_bio->bios[mirror] == bio)
 			break;
 
-	if (error == -ENOTSUPP && test_bit(R1BIO_Barrier, &r1_bio->state)) {
+	if (error == -EOPNOTSUPP && test_bit(R1BIO_Barrier, &r1_bio->state)) {
 		set_bit(BarriersNotsupp, &conf->mirrors[mirror].rdev->flags);
 		set_bit(R1BIO_BarrierRetry, &r1_bio->state);
 		r1_bio->mddev->barriers_work = 0;
+		/* Don't rdev_dec_pending in this branch - keep it for the retry */
 	} else {
 		/*
 		 * this branch is our 'one mirror IO has finished' event handler:
@@ -365,6 +366,7 @@ static int raid1_end_write_request(struct bio *bio, unsigned int bytes_done, int
 				}
 			}
 		}
+		rdev_dec_pending(conf->mirrors[mirror].rdev, conf->mddev);
 	}
 	/*
 	 *
@@ -374,11 +376,9 @@ static int raid1_end_write_request(struct bio *bio, unsigned int bytes_done, int
 	if (atomic_dec_and_test(&r1_bio->remaining)) {
 		if (test_bit(R1BIO_BarrierRetry, &r1_bio->state)) {
 			reschedule_retry(r1_bio);
-			/* Don't dec_pending yet, we want to hold
-			 * the reference over the retry
-			 */
 			goto out;
 		}
+		/* it really is the end of this request */
 		if (test_bit(R1BIO_BehindIO, &r1_bio->state)) {
 			/* free extra copy of the data pages */
 			int i = bio->bi_vcnt;
@@ -393,8 +393,6 @@ static int raid1_end_write_request(struct bio *bio, unsigned int bytes_done, int
 		md_write_end(r1_bio->mddev);
 		raid_end_bio_io(r1_bio);
 	}
-
-	rdev_dec_pending(conf->mirrors[mirror].rdev, conf->mddev);
  out:
 	if (to_put)
 		bio_put(to_put);
@@ -753,18 +751,24 @@ static int make_request(request_queue_t *q, struct bio * bio)
 	const int rw = bio_data_dir(bio);
 	int do_barriers;
 
-	if (unlikely(!mddev->barriers_work && bio_barrier(bio))) {
-		bio_endio(bio, bio->bi_size, -EOPNOTSUPP);
-		return 0;
-	}
-
 	/*
 	 * Register the new request and wait if the reconstruction
 	 * thread has put up a bar for new requests.
 	 * Continue immediately if no resync is active currently.
+	 * We test barriers_work *after* md_write_start as md_write_start
+	 * may cause the first superblock write, and that will check out
+	 * if barriers work.
 	 */
+
 	md_write_start(mddev, bio); /* wait on superblock update early */
 
+	if (unlikely(!mddev->barriers_work && bio_barrier(bio))) {
+		if (rw == WRITE)
+			md_write_end(mddev);
+		bio_endio(bio, bio->bi_size, -EOPNOTSUPP);
+		return 0;
+	}
+
 	wait_barrier(conf);
 
 	disk_stat_inc(mddev->gendisk, ios[rw]);
@@ -1404,10 +1408,11 @@ static void raid1d(mddev_t *mddev)
 			unplug = 1;
 		} else if (test_bit(R1BIO_BarrierRetry, &r1_bio->state)) {
 			/* some requests in the r1bio were BIO_RW_BARRIER
-			 * requests which failed with -ENOTSUPP.  Hohumm..
+			 * requests which failed with -EOPNOTSUPP.  Hohumm..
 			 * Better resubmit without the barrier.
 			 * We know which devices to resubmit for, because
 			 * all others have had their bios[] entry cleared.
+			 * We already have a nr_pending reference on these rdevs.
 			 */
 			int i;
 			clear_bit(R1BIO_BarrierRetry, &r1_bio->state);

drivers/md/raid10.c

@@ -1407,43 +1407,54 @@ static void raid10d(mddev_t *mddev)
 				if (s > (PAGE_SIZE>>9))
 					s = PAGE_SIZE >> 9;
 
+				rcu_read_lock();
 				do {
 					int d = r10_bio->devs[sl].devnum;
-					rdev = conf->mirrors[d].rdev;
+					rdev = rcu_dereference(conf->mirrors[d].rdev);
 					if (rdev &&
-					    test_bit(In_sync, &rdev->flags) &&
-					    sync_page_io(rdev->bdev,
-							 r10_bio->devs[sl].addr +
-							 sect + rdev->data_offset,
-							 s<<9,
-							 conf->tmppage, READ))
-						success = 1;
-					else {
-						sl++;
-						if (sl == conf->copies)
-							sl = 0;
+					    test_bit(In_sync, &rdev->flags)) {
+						atomic_inc(&rdev->nr_pending);
+						rcu_read_unlock();
+						success = sync_page_io(rdev->bdev,
+								       r10_bio->devs[sl].addr +
+								       sect + rdev->data_offset,
+								       s<<9,
+								       conf->tmppage, READ);
+						rdev_dec_pending(rdev, mddev);
+						rcu_read_lock();
+						if (success)
+							break;
 					}
+					sl++;
+					if (sl == conf->copies)
+						sl = 0;
 				} while (!success && sl != r10_bio->read_slot);
+				rcu_read_unlock();
 
 				if (success) {
 					int start = sl;
 					/* write it back and re-read */
+					rcu_read_lock();
 					while (sl != r10_bio->read_slot) {
 						int d;
 						if (sl==0)
 							sl = conf->copies;
 						sl--;
 						d = r10_bio->devs[sl].devnum;
-						rdev = conf->mirrors[d].rdev;
-						atomic_add(s, &rdev->corrected_errors);
+						rdev = rcu_dereference(conf->mirrors[d].rdev);
 						if (rdev &&
 						    test_bit(In_sync, &rdev->flags)) {
+							atomic_inc(&rdev->nr_pending);
+							rcu_read_unlock();
+							atomic_add(s, &rdev->corrected_errors);
 							if (sync_page_io(rdev->bdev,
 									 r10_bio->devs[sl].addr +
 									 sect + rdev->data_offset,
 									 s<<9, conf->tmppage, WRITE) == 0)
 								/* Well, this device is dead */
 								md_error(mddev, rdev);
+							rdev_dec_pending(rdev, mddev);
+							rcu_read_lock();
 						}
 					}
 					sl = start;
@@ -1453,17 +1464,22 @@ static void raid10d(mddev_t *mddev)
 							sl = conf->copies;
 						sl--;
 						d = r10_bio->devs[sl].devnum;
-						rdev = conf->mirrors[d].rdev;
+						rdev = rcu_dereference(conf->mirrors[d].rdev);
 						if (rdev &&
 						    test_bit(In_sync, &rdev->flags)) {
+							atomic_inc(&rdev->nr_pending);
+							rcu_read_unlock();
 							if (sync_page_io(rdev->bdev,
 									 r10_bio->devs[sl].addr +
 									 sect + rdev->data_offset,
 									 s<<9, conf->tmppage, READ) == 0)
 								/* Well, this device is dead */
 								md_error(mddev, rdev);
+							rdev_dec_pending(rdev, mddev);
+							rcu_read_lock();
 						}
 					}
+					rcu_read_unlock();
 				} else {
 					/* Cannot read from anywhere -- bye bye array */
 					md_error(mddev, conf->mirrors[r10_bio->devs[r10_bio->read_slot].devnum].rdev);

drivers/media/video/cx88/cx88-alsa.c

@@ -616,7 +616,7 @@ static struct snd_kcontrol_new snd_cx88_capture_volume = {
  * Only boards with eeprom and byte 1 at eeprom=1 have it
  */
 
-static struct pci_device_id cx88_audio_pci_tbl[] = {
+static struct pci_device_id cx88_audio_pci_tbl[] __devinitdata = {
 	{0x14f1,0x8801,PCI_ANY_ID,PCI_ANY_ID,0,0,0},
 	{0x14f1,0x8811,PCI_ANY_ID,PCI_ANY_ID,0,0,0},
 	{0, }

drivers/mmc/at91_mci.c

@@ -621,9 +621,6 @@ static void at91_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	struct at91mci_host *host = mmc_priv(mmc);
 	unsigned long at91_master_clock = clk_get_rate(mci_clk);
 
-	DBG("Clock %uHz, busmode %u, powermode %u, Vdd %u\n",
-		ios->clock, ios->bus_mode, ios->power_mode, ios->vdd);
-
 	if (host)
 		host->bus_mode = ios->bus_mode;
 	else