소스 검색

myri10ge: remove unnecessary read of PCI_CAP_ID_EXP

The PCIE capability offset is saved during PCI bus walking.  It will
remove an unnecessary search in the PCI configuration space if this
value is referenced instead of reacquiring it.

Signed-off-by: Jon Mason <mason@myri.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Mason 14 년 전
부모
커밋
effd1edab9
1개의 변경된 파일5개의 추가작업 그리고 6개의 파일을 삭제
  1. 5 6
      drivers/net/myri10ge/myri10ge.c

+ 5 - 6
drivers/net/myri10ge/myri10ge.c

@@ -1081,7 +1081,7 @@ static int myri10ge_toggle_relaxed(struct pci_dev *pdev, int on)
 	int ret, cap, err;
 	u16 ctl;
 
-	cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
+	cap = pci_pcie_cap(pdev);
 	if (!cap)
 		return 0;
 
@@ -3191,7 +3191,7 @@ static void myri10ge_enable_ecrc(struct myri10ge_priv *mgp)
 {
 	struct pci_dev *bridge = mgp->pdev->bus->self;
 	struct device *dev = &mgp->pdev->dev;
-	unsigned cap;
+	int cap;
 	unsigned err_cap;
 	u16 val;
 	u8 ext_type;
@@ -3201,7 +3201,7 @@ static void myri10ge_enable_ecrc(struct myri10ge_priv *mgp)
 		return;
 
 	/* check that the bridge is a root port */
-	cap = pci_find_capability(bridge, PCI_CAP_ID_EXP);
+	cap = pci_pcie_cap(bridge);
 	pci_read_config_word(bridge, cap + PCI_CAP_FLAGS, &val);
 	ext_type = (val & PCI_EXP_FLAGS_TYPE) >> 4;
 	if (ext_type != PCI_EXP_TYPE_ROOT_PORT) {
@@ -3219,8 +3219,7 @@ static void myri10ge_enable_ecrc(struct myri10ge_priv *mgp)
 						" to force ECRC\n");
 					return;
 				}
-				cap =
-				    pci_find_capability(bridge, PCI_CAP_ID_EXP);
+				cap = pci_pcie_cap(bridge);
 				pci_read_config_word(bridge,
 						     cap + PCI_CAP_FLAGS, &val);
 				ext_type = (val & PCI_EXP_FLAGS_TYPE) >> 4;
@@ -3341,7 +3340,7 @@ static void myri10ge_select_firmware(struct myri10ge_priv *mgp)
 		int link_width, exp_cap;
 		u16 lnk;
 
-		exp_cap = pci_find_capability(mgp->pdev, PCI_CAP_ID_EXP);
+		exp_cap = pci_pcie_cap(mgp->pdev);
 		pci_read_config_word(mgp->pdev, exp_cap + PCI_EXP_LNKSTA, &lnk);
 		link_width = (lnk >> 4) & 0x3f;