Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

The forcedeth changes had a conflict with the conversion over
to atomic u64 statistics in net-next.

The libertas cfg.c code had a conflict with the bss reference
counting fix by John Linville in net-next.

Conflicts:
	drivers/net/ethernet/nvidia/forcedeth.c
	drivers/net/wireless/libertas/cfg.c

.mailmap

@@ -68,6 +68,7 @@ Juha Yrjola <juha.yrjola@solidboot.com>
 Kay Sievers <kay.sievers@vrfy.org>
 Kenneth W Chen <kenneth.w.chen@intel.com>
 Koushik <raghavendra.koushik@neterion.com>
+Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
 Leonid I Ananiev <leonid.i.ananiev@intel.com>
 Linas Vepstas <linas@austin.ibm.com>
 Mark Brown <broonie@sirena.org.uk>
@@ -111,3 +112,4 @@ Uwe Kleine-König <ukl@pengutronix.de>
 Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
 Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
 Takashi YOSHII <takashi.yoshii.zj@renesas.com>
+Yusuke Goda <goda.yusuke@renesas.com>

Documentation/ABI/testing/sysfs-block

@@ -206,16 +206,3 @@ Description:
 		when a discarded area is read the discard_zeroes_data
 		parameter will be set to one. Otherwise it will be 0 and
 		the result of reading a discarded area is undefined.
-What:		/sys/block/<disk>/alias
-Date:		Aug 2011
-Contact:	Nao Nishijima <nao.nishijima.xt@hitachi.com>
-Description:
-		A raw device name of a disk does not always point a same disk
-		each boot-up time. Therefore, users have to use persistent
-		device names, which udev creates when the kernel finds a disk,
-		instead of raw device name. However, kernel doesn't show those
-		persistent names on its messages (e.g. dmesg).
-		This file can store an alias of the disk and it would be
-		appeared in kernel messages if it is set. A disk can have an
-		alias which length is up to 255bytes. Users can use alphabets,
-		numbers, "-" and "_" in alias name. This file is writeonce.

Documentation/DocBook/drm.tmpl

@@ -32,7 +32,7 @@
       The Linux DRM layer contains code intended to support the needs
       of complex graphics devices, usually containing programmable
       pipelines well suited to 3D graphics acceleration.  Graphics
-      drivers in the kernel can make use of DRM functions to make
+      drivers in the kernel may make use of DRM functions to make
       tasks like memory management, interrupt handling and DMA easier,
       and provide a uniform interface to applications.
     </para>
@@ -57,10 +57,10 @@
       existing drivers.
     </para>
     <para>
-      First, we'll go over some typical driver initialization
+      First, we go over some typical driver initialization
       requirements, like setting up command buffers, creating an
       initial output configuration, and initializing core services.
-      Subsequent sections will cover core internals in more detail,
+      Subsequent sections cover core internals in more detail,
       providing implementation notes and examples.
     </para>
     <para>
@@ -74,7 +74,7 @@
     </para>
     <para>
       The core of every DRM driver is struct drm_driver.  Drivers
-      will typically statically initialize a drm_driver structure,
+      typically statically initialize a drm_driver structure,
       then pass it to drm_init() at load time.
     </para>
 
@@ -88,8 +88,8 @@
     </para>
     <programlisting>
       static struct drm_driver driver = {
-	/* don't use mtrr's here, the Xserver or user space app should
-	 * deal with them for intel hardware.
+	/* Don't use MTRRs here; the Xserver or userspace app should
+	 * deal with them for Intel hardware.
 	 */
 	.driver_features =
 	    DRIVER_USE_AGP | DRIVER_REQUIRE_AGP |
@@ -154,8 +154,8 @@
     </programlisting>
     <para>
       In the example above, taken from the i915 DRM driver, the driver
-      sets several flags indicating what core features it supports.
-      We'll go over the individual callbacks in later sections.  Since
+      sets several flags indicating what core features it supports;
+      we go over the individual callbacks in later sections.  Since
       flags indicate which features your driver supports to the DRM
       core, you need to set most of them prior to calling drm_init().  Some,
       like DRIVER_MODESET can be set later based on user supplied parameters,
@@ -203,8 +203,8 @@
 	<term>DRIVER_HAVE_IRQ</term><term>DRIVER_IRQ_SHARED</term>
 	<listitem>
 	  <para>
-	    DRIVER_HAVE_IRQ indicates whether the driver has a IRQ
-	    handler, DRIVER_IRQ_SHARED indicates whether the device &amp;
+	    DRIVER_HAVE_IRQ indicates whether the driver has an IRQ
+	    handler.  DRIVER_IRQ_SHARED indicates whether the device &amp;
 	    handler support shared IRQs (note that this is required of
 	    PCI drivers).
 	  </para>
@@ -214,8 +214,8 @@
 	<term>DRIVER_DMA_QUEUE</term>
 	<listitem>
 	  <para>
-	    If the driver queues DMA requests and completes them
-	    asynchronously, this flag should be set.  Deprecated.
+	    Should be set if the driver queues DMA requests and completes them
+	    asynchronously.  Deprecated.
 	  </para>
 	</listitem>
       </varlistentry>
@@ -238,7 +238,7 @@
     </variablelist>
     <para>
       In this specific case, the driver requires AGP and supports
-      IRQs.  DMA, as we'll see, is handled by device specific ioctls
+      IRQs.  DMA, as discussed later, is handled by device-specific ioctls
       in this case.  It also supports the kernel mode setting APIs, though
       unlike in the actual i915 driver source, this example unconditionally
       exports KMS capability.
@@ -269,36 +269,34 @@
       initial output configuration.
     </para>
     <para>
-      Note that the tasks performed at driver load time must not
-      conflict with DRM client requirements.  For instance, if user
+      If compatibility is a concern (e.g. with drivers converted over
+      to the new interfaces from the old ones), care must be taken to
+      prevent device initialization and control that is incompatible with
+      currently active userspace drivers.  For instance, if user
       level mode setting drivers are in use, it would be problematic
       to perform output discovery &amp; configuration at load time.
-      Likewise, if pre-memory management aware user level drivers are
+      Likewise, if user-level drivers unaware of memory management are
       in use, memory management and command buffer setup may need to
-      be omitted.  These requirements are driver specific, and care
+      be omitted.  These requirements are driver-specific, and care
       needs to be taken to keep both old and new applications and
       libraries working.  The i915 driver supports the "modeset"
       module parameter to control whether advanced features are
-      enabled at load time or in legacy fashion.  If compatibility is
-      a concern (e.g. with drivers converted over to the new interfaces
-      from the old ones), care must be taken to prevent incompatible
-      device initialization and control with the currently active
-      userspace drivers.
+      enabled at load time or in legacy fashion.
     </para>
 
     <sect2>
       <title>Driver private &amp; performance counters</title>
       <para>
 	The driver private hangs off the main drm_device structure and
-	can be used for tracking various device specific bits of
+	can be used for tracking various device-specific bits of
 	information, like register offsets, command buffer status,
 	register state for suspend/resume, etc.  At load time, a
-	driver can simply allocate one and set drm_device.dev_priv
-	appropriately; at unload the driver can free it and set
-	drm_device.dev_priv to NULL.
+	driver may simply allocate one and set drm_device.dev_priv
+	appropriately; it should be freed and drm_device.dev_priv set
+	to NULL when the driver is unloaded.
       </para>
       <para>
-	The DRM supports several counters which can be used for rough
+	The DRM supports several counters which may be used for rough
 	performance characterization.  Note that the DRM stat counter
 	system is not often used by applications, and supporting
 	additional counters is completely optional.
@@ -307,15 +305,15 @@
 	These interfaces are deprecated and should not be used.  If performance
 	monitoring is desired, the developer should investigate and
 	potentially enhance the kernel perf and tracing infrastructure to export
-	GPU related performance information to performance monitoring
-	tools and applications.
+	GPU related performance information for consumption by performance
+	monitoring tools and applications.
       </para>
     </sect2>
 
     <sect2>
       <title>Configuring the device</title>
       <para>
-	Obviously, device configuration will be device specific.
+	Obviously, device configuration is device-specific.
 	However, there are several common operations: finding a
 	device's PCI resources, mapping them, and potentially setting
 	up an IRQ handler.
@@ -323,10 +321,10 @@
       <para>
 	Finding &amp; mapping resources is fairly straightforward.  The
 	DRM wrapper functions, drm_get_resource_start() and
-	drm_get_resource_len() can be used to find BARs on the given
+	drm_get_resource_len(), may be used to find BARs on the given
 	drm_device struct.  Once those values have been retrieved, the
 	driver load function can call drm_addmap() to create a new
-	mapping for the BAR in question.  Note you'll probably want a
+	mapping for the BAR in question.  Note that you probably want a
 	drm_local_map_t in your driver private structure to track any
 	mappings you create.
 <!-- !Fdrivers/gpu/drm/drm_bufs.c drm_get_resource_* -->
@@ -335,20 +333,20 @@
       <para>
 	if compatibility with other operating systems isn't a concern
 	(DRM drivers can run under various BSD variants and OpenSolaris),
-	native Linux calls can be used for the above, e.g. pci_resource_*
+	native Linux calls may be used for the above, e.g. pci_resource_*
 	and iomap*/iounmap.  See the Linux device driver book for more
 	info.
       </para>
       <para>
-	Once you have a register map, you can use the DRM_READn() and
+	Once you have a register map, you may use the DRM_READn() and
 	DRM_WRITEn() macros to access the registers on your device, or
-	use driver specific versions to offset into your MMIO space
-	relative to a driver specific base pointer (see I915_READ for
-	example).
+	use driver-specific versions to offset into your MMIO space
+	relative to a driver-specific base pointer (see I915_READ for
+	an example).
       </para>
       <para>
 	If your device supports interrupt generation, you may want to
-	setup an interrupt handler at driver load time as well.  This
+	set up an interrupt handler when the driver is loaded.  This
 	is done using the drm_irq_install() function.  If your device
 	supports vertical blank interrupts, it should call
 	drm_vblank_init() to initialize the core vblank handling code before
@@ -357,7 +355,7 @@
       </para>
 <!--!Fdrivers/char/drm/drm_irq.c drm_irq_install-->
       <para>
-	Once your interrupt handler is registered (it'll use your
+	Once your interrupt handler is registered (it uses your
 	drm_driver.irq_handler as the actual interrupt handling
 	function), you can safely enable interrupts on your device,
 	assuming any other state your interrupt handler uses is also
@@ -371,10 +369,10 @@
 	using the pci_map_rom() call, a convenience function that
 	takes care of mapping the actual ROM, whether it has been
 	shadowed into memory (typically at address 0xc0000) or exists
-	on the PCI device in the ROM BAR.  Note that once you've
-	mapped the ROM and extracted any necessary information, be
-	sure to unmap it; on many devices the ROM address decoder is
-	shared with other BARs, so leaving it mapped can cause
+	on the PCI device in the ROM BAR.  Note that after the ROM
+	has been mapped and any necessary information has been extracted,
+	it should be unmapped; on many devices, the ROM address decoder is
+	shared with other BARs, so leaving it mapped could cause
 	undesired behavior like hangs or memory corruption.
 <!--!Fdrivers/pci/rom.c pci_map_rom-->
       </para>
@@ -389,9 +387,9 @@
 	should support a memory manager.
       </para>
       <para>
-	If your driver supports memory management (it should!), you'll
+	If your driver supports memory management (it should!), you
 	need to set that up at load time as well.  How you initialize
-	it depends on which memory manager you're using, TTM or GEM.
+	it depends on which memory manager you're using: TTM or GEM.
       </para>
       <sect3>
 	<title>TTM initialization</title>
@@ -401,7 +399,7 @@
 	  and devices with dedicated video RAM (VRAM), i.e. most discrete
 	  graphics devices.  If your device has dedicated RAM, supporting
 	  TTM is desirable.  TTM also integrates tightly with your
-	  driver specific buffer execution function.  See the radeon
+	  driver-specific buffer execution function.  See the radeon
 	  driver for examples.
 	</para>
 	<para>
@@ -429,21 +427,21 @@
 	  created by the memory manager at runtime.  Your global TTM should
 	  have a type of TTM_GLOBAL_TTM_MEM.  The size field for the global
 	  object should be sizeof(struct ttm_mem_global), and the init and
-	  release hooks should point at your driver specific init and
-	  release routines, which will probably eventually call
-	  ttm_mem_global_init and ttm_mem_global_release respectively.
+	  release hooks should point at your driver-specific init and
+	  release routines, which probably eventually call
+	  ttm_mem_global_init and ttm_mem_global_release, respectively.
 	</para>
 	<para>
 	  Once your global TTM accounting structure is set up and initialized
-	  (done by calling ttm_global_item_ref on the global object you
-	  just created), you'll need to create a buffer object TTM to
+	  by calling ttm_global_item_ref() on it,
+	  you need to create a buffer object TTM to
 	  provide a pool for buffer object allocation by clients and the
 	  kernel itself.  The type of this object should be TTM_GLOBAL_TTM_BO,
 	  and its size should be sizeof(struct ttm_bo_global).  Again,
-	  driver specific init and release functions can be provided,
-	  likely eventually calling ttm_bo_global_init and
-	  ttm_bo_global_release, respectively.  Also like the previous
-	  object, ttm_global_item_ref is used to create an initial reference
+	  driver-specific init and release functions may be provided,
+	  likely eventually calling ttm_bo_global_init() and
+	  ttm_bo_global_release(), respectively.  Also, like the previous
+	  object, ttm_global_item_ref() is used to create an initial reference
 	  count for the TTM, which will call your initialization function.
 	</para>
       </sect3>
@@ -453,27 +451,26 @@
 	  GEM is an alternative to TTM, designed specifically for UMA
 	  devices.  It has simpler initialization and execution requirements
 	  than TTM, but has no VRAM management capability.  Core GEM
-	  initialization is comprised of a basic drm_mm_init call to create
+	  is initialized by calling drm_mm_init() to create
 	  a GTT DRM MM object, which provides an address space pool for
-	  object allocation.  In a KMS configuration, the driver will
-	  need to allocate and initialize a command ring buffer following
-	  basic GEM initialization.  Most UMA devices have a so-called
+	  object allocation.  In a KMS configuration, the driver
+	  needs to allocate and initialize a command ring buffer following
+	  core GEM initialization.  A UMA device usually has what is called a
 	  "stolen" memory region, which provides space for the initial
 	  framebuffer and large, contiguous memory regions required by the
-	  device.  This space is not typically managed by GEM, and must
+	  device.  This space is not typically managed by GEM, and it must
 	  be initialized separately into its own DRM MM object.
 	</para>
 	<para>
-	  Initialization will be driver specific, and will depend on
-	  the architecture of the device.  In the case of Intel
+	  Initialization is driver-specific. In the case of Intel
 	  integrated graphics chips like 965GM, GEM initialization can
 	  be done by calling the internal GEM init function,
 	  i915_gem_do_init().  Since the 965GM is a UMA device
-	  (i.e. it doesn't have dedicated VRAM), GEM will manage
+	  (i.e. it doesn't have dedicated VRAM), GEM manages
 	  making regular RAM available for GPU operations.  Memory set
 	  aside by the BIOS (called "stolen" memory by the i915
-	  driver) will be managed by the DRM memrange allocator; the
-	  rest of the aperture will be managed by GEM.
+	  driver) is managed by the DRM memrange allocator; the
+	  rest of the aperture is managed by GEM.
 	  <programlisting>
 	    /* Basic memrange allocator for stolen space (aka vram) */
 	    drm_memrange_init(&amp;dev_priv->vram, 0, prealloc_size);
@@ -483,7 +480,7 @@
 <!--!Edrivers/char/drm/drm_memrange.c-->
 	</para>
 	<para>
-	  Once the memory manager has been set up, we can allocate the
+	  Once the memory manager has been set up, we may allocate the
 	  command buffer.  In the i915 case, this is also done with a
 	  GEM function, i915_gem_init_ringbuffer().
 	</para>
@@ -493,16 +490,25 @@
     <sect2>
       <title>Output configuration</title>
       <para>
-	The final initialization task is output configuration.  This involves
-	finding and initializing the CRTCs, encoders and connectors
-	for your device, creating an initial configuration and
-	registering a framebuffer console driver.
+	The final initialization task is output configuration.  This involves:
+	<itemizedlist>
+	  <listitem>
+	    Finding and initializing the CRTCs, encoders, and connectors
+	    for the device.
+	  </listitem>
+	  <listitem>
+	    Creating an initial configuration.
+	  </listitem>
+	  <listitem>
+	    Registering a framebuffer console driver.
+	  </listitem>
+	</itemizedlist>
       </para>
       <sect3>
 	<title>Output discovery and initialization</title>
 	<para>
-	  Several core functions exist to create CRTCs, encoders and
-	  connectors, namely drm_crtc_init(), drm_connector_init() and
+	  Several core functions exist to create CRTCs, encoders, and
+	  connectors, namely: drm_crtc_init(), drm_connector_init(), and
 	  drm_encoder_init(), along with several "helper" functions to
 	  perform common tasks.
 	</para>
@@ -555,10 +561,10 @@ void intel_crt_init(struct drm_device *dev)
 	</programlisting>
 	<para>
 	  In the example above (again, taken from the i915 driver), a
-	  CRT connector and encoder combination is created.  A device
-	  specific i2c bus is also created, for fetching EDID data and
+	  CRT connector and encoder combination is created.  A device-specific
+	  i2c bus is also created for fetching EDID data and
 	  performing monitor detection.  Once the process is complete,
-	  the new connector is registered with sysfs, to make its
+	  the new connector is registered with sysfs to make its
 	  properties available to applications.
 	</para>
 	<sect4>
@@ -567,12 +573,12 @@ void intel_crt_init(struct drm_device *dev)
 	    Since many PC-class graphics devices have similar display output
 	    designs, the DRM provides a set of helper functions to make
 	    output management easier.  The core helper routines handle
-	    encoder re-routing and disabling of unused functions following
-	    mode set.  Using the helpers is optional, but recommended for
+	    encoder re-routing and the disabling of unused functions following
+	    mode setting.  Using the helpers is optional, but recommended for
 	    devices with PC-style architectures (i.e. a set of display planes
 	    for feeding pixels to encoders which are in turn routed to
 	    connectors).  Devices with more complex requirements needing
-	    finer grained management can opt to use the core callbacks
+	    finer grained management may opt to use the core callbacks
 	    directly.
 	  </para>
 	  <para>
@@ -580,17 +586,25 @@ void intel_crt_init(struct drm_device *dev)
 	  </para>
 	</sect4>
 	<para>
-	  For each encoder, CRTC and connector, several functions must
-	  be provided, depending on the object type.  Encoder objects
-	  need to provide a DPMS (basically on/off) function, mode fixup
-	  (for converting requested modes into native hardware timings),
-	  and prepare, set and commit functions for use by the core DRM
-	  helper functions.  Connector helpers need to provide mode fetch and
-	  validity functions as well as an encoder matching function for
-	  returning an ideal encoder for a given connector.  The core
-	  connector functions include a DPMS callback, (deprecated)
-	  save/restore routines, detection, mode probing, property handling,
-	  and cleanup functions.
+	  Each encoder object needs to provide:
+	  <itemizedlist>
+	    <listitem>
+	      A DPMS (basically on/off) function.
+	    </listitem>
+	    <listitem>
+	      A mode-fixup function (for converting requested modes into
+	      native hardware timings).
+	    </listitem>
+	    <listitem>
+	      Functions (prepare, set, and commit) for use by the core DRM
+	      helper functions.
+	    </listitem>
+	  </itemizedlist>
+	  Connector helpers need to provide functions (mode-fetch, validity,
+	  and encoder-matching) for returning an ideal encoder for a given
+	  connector.  The core connector functions include a DPMS callback,
+	  save/restore routines (deprecated), detection, mode probing,
+	  property handling, and cleanup functions.
 	</para>
 <!--!Edrivers/char/drm/drm_crtc.h-->
 <!--!Edrivers/char/drm/drm_crtc.c-->
@@ -605,22 +619,33 @@ void intel_crt_init(struct drm_device *dev)
     <title>VBlank event handling</title>
     <para>
       The DRM core exposes two vertical blank related ioctls:
-      DRM_IOCTL_WAIT_VBLANK and DRM_IOCTL_MODESET_CTL.
+      <variablelist>
+        <varlistentry>
+          <term>DRM_IOCTL_WAIT_VBLANK</term>
+          <listitem>
+            <para>
+              This takes a struct drm_wait_vblank structure as its argument,
+              and it is used to block or request a signal when a specified
+              vblank event occurs.
+            </para>
+          </listitem>
+        </varlistentry>
+        <varlistentry>
+          <term>DRM_IOCTL_MODESET_CTL</term>
+          <listitem>
+            <para>
+              This should be called by application level drivers before and
+              after mode setting, since on many devices the vertical blank
+              counter is reset at that time.  Internally, the DRM snapshots
+              the last vblank count when the ioctl is called with the
+              _DRM_PRE_MODESET command, so that the counter won't go backwards
+              (which is dealt with when _DRM_POST_MODESET is used).
+            </para>
+          </listitem>
+        </varlistentry>
+      </variablelist>
 <!--!Edrivers/char/drm/drm_irq.c-->
     </para>
-    <para>
-      DRM_IOCTL_WAIT_VBLANK takes a struct drm_wait_vblank structure
-      as its argument, and is used to block or request a signal when a
-      specified vblank event occurs.
-    </para>
-    <para>
-      DRM_IOCTL_MODESET_CTL should be called by application level
-      drivers before and after mode setting, since on many devices the
-      vertical blank counter will be reset at that time.  Internally,
-      the DRM snapshots the last vblank count when the ioctl is called
-      with the _DRM_PRE_MODESET command so that the counter won't go
-      backwards (which is dealt with when _DRM_POST_MODESET is used).
-    </para>
     <para>
       To support the functions above, the DRM core provides several
       helper functions for tracking vertical blank counters, and
@@ -632,24 +657,24 @@ void intel_crt_init(struct drm_device *dev)
       register.  The enable and disable vblank callbacks should enable
       and disable vertical blank interrupts, respectively.  In the
       absence of DRM clients waiting on vblank events, the core DRM
-      code will use the disable_vblank() function to disable
-      interrupts, which saves power.  They'll be re-enabled again when
+      code uses the disable_vblank() function to disable
+      interrupts, which saves power.  They are re-enabled again when
       a client calls the vblank wait ioctl above.
     </para>
     <para>
-      Devices that don't provide a count register can simply use an
+      A device that doesn't provide a count register may simply use an
       internal atomic counter incremented on every vertical blank
-      interrupt, and can make their enable and disable vblank
-      functions into no-ops.
+      interrupt (and then treat the enable_vblank() and disable_vblank()
+      callbacks as no-ops).
     </para>
   </sect1>
 
   <sect1>
     <title>Memory management</title>
     <para>
-      The memory manager lies at the heart of many DRM operations, and
-      is also required to support advanced client features like OpenGL
-      pbuffers.  The DRM currently contains two memory managers, TTM
+      The memory manager lies at the heart of many DRM operations; it
+      is required to support advanced client features like OpenGL
+      pbuffers.  The DRM currently contains two memory managers: TTM
       and GEM.
     </para>
 
@@ -679,41 +704,46 @@ void intel_crt_init(struct drm_device *dev)
       <para>
 	GEM-enabled drivers must provide gem_init_object() and
 	gem_free_object() callbacks to support the core memory
-	allocation routines.  They should also provide several driver
-	specific ioctls to support command execution, pinning, buffer
+	allocation routines.  They should also provide several driver-specific
+	ioctls to support command execution, pinning, buffer
 	read &amp; write, mapping, and domain ownership transfers.
       </para>
       <para>
-	On a fundamental level, GEM involves several operations: memory
-	allocation and freeing, command execution, and aperture management
-	at command execution time.  Buffer object allocation is relatively
+	On a fundamental level, GEM involves several operations:
+	<itemizedlist>
+	  <listitem>Memory allocation and freeing</listitem>
+	  <listitem>Command execution</listitem>
+	  <listitem>Aperture management at command execution time</listitem>
+	</itemizedlist>
+	Buffer object allocation is relatively
 	straightforward and largely provided by Linux's shmem layer, which
 	provides memory to back each object.  When mapped into the GTT
 	or used in a command buffer, the backing pages for an object are
 	flushed to memory and marked write combined so as to be coherent
-	with the GPU.  Likewise, when the GPU finishes rendering to an object,
-	if the CPU accesses it, it must be made coherent with the CPU's view
+	with the GPU.  Likewise, if the CPU accesses an object after the GPU
+	has finished rendering to the object, then the object must be made
+	coherent with the CPU's view
 	of memory, usually involving GPU cache flushing of various kinds.
-	This core CPU&lt;-&gt;GPU coherency management is provided by the GEM
-	set domain function, which evaluates an object's current domain and
+	This core CPU&lt;-&gt;GPU coherency management is provided by a
+	device-specific ioctl, which evaluates an object's current domain and
 	performs any necessary flushing or synchronization to put the object
 	into the desired coherency domain (note that the object may be busy,
-	i.e. an active render target; in that case the set domain function
-	will block the client and wait for rendering to complete before
+	i.e. an active render target; in that case, setting the domain
+	blocks the client and waits for rendering to complete before
 	performing any necessary flushing operations).
       </para>
       <para>
 	Perhaps the most important GEM function is providing a command
 	execution interface to clients.  Client programs construct command
-	buffers containing references to previously allocated memory objects
-	and submit them to GEM.  At that point, GEM will take care to bind
+	buffers containing references to previously allocated memory objects,
+	and then submit them to GEM.  At that point, GEM takes care to bind
 	all the objects into the GTT, execute the buffer, and provide
 	necessary synchronization between clients accessing the same buffers.
 	This often involves evicting some objects from the GTT and re-binding
 	others (a fairly expensive operation), and providing relocation
 	support which hides fixed GTT offsets from clients.  Clients must
 	take care not to submit command buffers that reference more objects
-	than can fit in the GTT or GEM will reject them and no rendering
+	than can fit in the GTT; otherwise, GEM will reject them and no rendering
 	will occur.  Similarly, if several objects in the buffer require
 	fence registers to be allocated for correct rendering (e.g. 2D blits
 	on pre-965 chips), care must be taken not to require more fence
@@ -729,7 +759,7 @@ void intel_crt_init(struct drm_device *dev)
     <title>Output management</title>
     <para>
       At the core of the DRM output management code is a set of
-      structures representing CRTCs, encoders and connectors.
+      structures representing CRTCs, encoders, and connectors.
     </para>
     <para>
       A CRTC is an abstraction representing a part of the chip that
@@ -765,21 +795,19 @@ void intel_crt_init(struct drm_device *dev)
   <sect1>
     <title>Framebuffer management</title>
     <para>
-      In order to set a mode on a given CRTC, encoder and connector
-      configuration, clients need to provide a framebuffer object which
-      will provide a source of pixels for the CRTC to deliver to the encoder(s)
-      and ultimately the connector(s) in the configuration.  A framebuffer
-      is fundamentally a driver specific memory object, made into an opaque
-      handle by the DRM addfb function.  Once an fb has been created this
-      way it can be passed to the KMS mode setting routines for use in
-      a configuration.
+      Clients need to provide a framebuffer object which provides a source
+      of pixels for a CRTC to deliver to the encoder(s) and ultimately the
+      connector(s). A framebuffer is fundamentally a driver-specific memory
+      object, made into an opaque handle by the DRM's addfb() function.
+      Once a framebuffer has been created this way, it may be passed to the
+      KMS mode setting routines for use in a completed configuration.
     </para>
   </sect1>
 
   <sect1>
     <title>Command submission &amp; fencing</title>
     <para>
-      This should cover a few device specific command submission
+      This should cover a few device-specific command submission
       implementations.
     </para>
   </sect1>
@@ -789,7 +817,7 @@ void intel_crt_init(struct drm_device *dev)
     <para>
       The DRM core provides some suspend/resume code, but drivers
       wanting full suspend/resume support should provide save() and
-      restore() functions.  These will be called at suspend,
+      restore() functions.  These are called at suspend,
       hibernate, or resume time, and should perform any state save or
       restore required by your device across suspend or hibernate
       states.
@@ -812,8 +840,8 @@ void intel_crt_init(struct drm_device *dev)
     <para>
       The DRM core exports several interfaces to applications,
       generally intended to be used through corresponding libdrm
-      wrapper functions.  In addition, drivers export device specific
-      interfaces for use by userspace drivers &amp; device aware
+      wrapper functions.  In addition, drivers export device-specific
+      interfaces for use by userspace drivers &amp; device-aware
       applications through ioctls and sysfs files.
     </para>
     <para>
@@ -822,8 +850,8 @@ void intel_crt_init(struct drm_device *dev)
       management, memory management, and output management.
     </para>
     <para>
-      Cover generic ioctls and sysfs layout here.  Only need high
-      level info, since man pages will cover the rest.
+      Cover generic ioctls and sysfs layout here.  We only need high-level
+      info, since man pages should cover the rest.
     </para>
   </chapter>
 

Documentation/blockdev/cciss.txt

@@ -98,14 +98,12 @@ You must enable "SCSI tape drive support for Smart Array 5xxx" and
 "SCSI support" in your kernel configuration to be able to use SCSI
 tape drives with your Smart Array 5xxx controller.
 
-Additionally, note that the driver will not engage the SCSI core at init 
-time.  The driver must be directed to dynamically engage the SCSI core via 
-the /proc filesystem entry which the "block" side of the driver creates as 
-/proc/driver/cciss/cciss* at runtime.  This is because at driver init time, 
-the SCSI core may not yet be initialized (because the driver is a block 
-driver) and attempting to register it with the SCSI core in such a case 
-would cause a hang.  This is best done via an initialization script 
-(typically in /etc/init.d, but could vary depending on distribution). 
+Additionally, note that the driver will engage the SCSI core at init
+time if any tape drives or medium changers are detected.  The driver may
+also be directed to dynamically engage the SCSI core via the /proc filesystem
+entry which the "block" side of the driver creates as
+/proc/driver/cciss/cciss* at runtime.  This is best done via a script.
+
 For example:
 
 	for x in /proc/driver/cciss/cciss[0-9]*

Documentation/cgroups/freezer-subsystem.txt

@@ -33,9 +33,9 @@ demonstrate this problem using nested bash shells:
 
 	From a second, unrelated bash shell:
 	$ kill -SIGSTOP 16690
-	$ kill -SIGCONT 16990
+	$ kill -SIGCONT 16690
 
-	<at this point 16990 exits and causes 16644 to exit too>
+	<at this point 16690 exits and causes 16644 to exit too>
 
 This happens because bash can observe both signals and choose how it
 responds to them.

Documentation/sound/alsa/HD-Audio-Models.txt

@@ -349,6 +349,7 @@ STAC92HD83*
   ref		Reference board
   mic-ref	Reference board with power management for ports
   dell-s14	Dell laptop
+  dell-vostro-3500	Dell Vostro 3500 laptop
   hp		HP laptops with (inverted) mute-LED
   hp-dv7-4000	HP dv-7 4000
   auto		BIOS setup (default)

Documentation/sound/alsa/HD-Audio.txt

@@ -579,7 +579,7 @@ Development Tree
 ~~~~~~~~~~~~~~~~
 The latest development codes for HD-audio are found on sound git tree:
 
-- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
+- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
 
 The master branch or for-next branches can be used as the main
 development branches in general while the HD-audio specific patches
@@ -594,7 +594,7 @@ is, installed via the usual spells: configure, make and make
 install(-modules).  See INSTALL in the package.  The snapshot tarballs
 are found at:
 
-- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/
+- ftp://ftp.suse.com/pub/people/tiwai/snapshot/
 
 
 Sending a Bug Report
@@ -696,7 +696,7 @@ via hda-verb won't change the mixer value.
 
 The hda-verb program is found in the ftp directory:
 
-- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/
+- ftp://ftp.suse.com/pub/people/tiwai/misc/
 
 Also a git repository is available:
 
@@ -764,7 +764,7 @@ operation, the jack plugging simulation, etc.
 
 The package is found in:
 
-- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/
+- ftp://ftp.suse.com/pub/people/tiwai/misc/
 
 A git repository is available:
 

Kbuild

@@ -92,7 +92,7 @@ always += missing-syscalls
 targets += missing-syscalls
 
 quiet_cmd_syscalls = CALL    $<
-      cmd_syscalls = $(CONFIG_SHELL) $< $(CC) $(c_flags)
+      cmd_syscalls = $(CONFIG_SHELL) $< $(CC) $(c_flags) $(missing_syscalls_flags)
 
 missing-syscalls: scripts/checksyscalls.sh $(offsets-file) FORCE
 	$(call cmd,syscalls)

MAINTAINERS

@@ -1106,6 +1106,7 @@ F:	drivers/media/video/s5p-fimc/
 ARM/SAMSUNG S5P SERIES Multi Format Codec (MFC) SUPPORT
 M:	Kyungmin Park <kyungmin.park@samsung.com>
 M:	Kamil Debski <k.debski@samsung.com>
+M:     Jeongtae Park <jtp.park@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org
 L:	linux-media@vger.kernel.org
 S:	Maintained
@@ -1926,9 +1927,11 @@ S:	Maintained
 F:	drivers/connector/
 
 CONTROL GROUPS (CGROUPS)
-M:	Paul Menage <paul@paulmenage.org>
+M:	Tejun Heo <tj@kernel.org>
 M:	Li Zefan <lizf@cn.fujitsu.com>
 L:	containers@lists.linux-foundation.org
+L:	cgroups@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup.git
 S:	Maintained
 F:	include/linux/cgroup*
 F:	kernel/cgroup*
@@ -2342,6 +2345,13 @@ S:	Supported
 F:	drivers/gpu/drm/i915
 F:	include/drm/i915*
 
+DRM DRIVERS FOR EXYNOS
+M:	Inki Dae <inki.dae@samsung.com>
+L:	dri-devel@lists.freedesktop.org
+S:	Supported
+F:	drivers/gpu/drm/exynos
+F:	include/drm/exynos*
+
 DSCC4 DRIVER
 M:	Francois Romieu <romieu@fr.zoreil.com>
 L:	netdev@vger.kernel.org
@@ -2576,7 +2586,7 @@ S:	Maintained
 F:	drivers/net/ethernet/i825xx/eexpress.*
 
 ETHERNET BRIDGE
-M:	Stephen Hemminger <shemminger@linux-foundation.org>
+M:	Stephen Hemminger <shemminger@vyatta.com>
 L:	bridge@lists.linux-foundation.org
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net:Bridge
@@ -4296,6 +4306,7 @@ MEMORY RESOURCE CONTROLLER
 M:	Balbir Singh <bsingharora@gmail.com>
 M:	Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
 M:	KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
+L:	cgroups@vger.kernel.org
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	mm/memcontrol.c
@@ -4329,7 +4340,7 @@ MIPS
 M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-mips@linux-mips.org
 W:	http://www.linux-mips.org/
-T:	git git://git.linux-mips.org/pub/scm/linux.git
+T:	git git://git.linux-mips.org/pub/scm/ralf/linux.git
 Q:	http://patchwork.linux-mips.org/project/linux-mips/list/
 S:	Supported
 F:	Documentation/mips/
@@ -4462,7 +4473,7 @@ S:	Supported
 F:	drivers/infiniband/hw/nes/
 
 NETEM NETWORK EMULATOR
-M:	Stephen Hemminger <shemminger@linux-foundation.org>
+M:	Stephen Hemminger <shemminger@vyatta.com>
 L:	netem@lists.linux-foundation.org
 S:	Maintained
 F:	net/sched/sch_netem.c
@@ -4939,7 +4950,7 @@ F:	drivers/char/ppdev.c
 F:	include/linux/ppdev.h
 
 PARAVIRT_OPS INTERFACE
-M:	Jeremy Fitzhardinge <jeremy@xensource.com>
+M:	Jeremy Fitzhardinge <jeremy@goop.org>
 M:	Chris Wright <chrisw@sous-sol.org>
 M:	Alok Kataria <akataria@vmware.com>
 M:	Rusty Russell <rusty@rustcorp.com.au>
@@ -5977,7 +5988,7 @@ S:	Maintained
 F:	drivers/usb/misc/sisusbvga/
 
 SKGE, SKY2 10/100/1000 GIGABIT ETHERNET DRIVERS
-M:	Stephen Hemminger <shemminger@linux-foundation.org>
+M:	Stephen Hemminger <shemminger@vyatta.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/marvell/sk*
@@ -6122,7 +6133,7 @@ F:	sound/
 SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
 M:	Liam Girdwood <lrg@ti.com>
 M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 W:	http://alsa-project.org/main/index.php/ASoC
 S:	Supported
@@ -7398,8 +7409,8 @@ S:	Maintained
 F:	arch/x86/kernel/cpu/mcheck/*
 
 XEN HYPERVISOR INTERFACE
-M:	Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
 M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+M:	Jeremy Fitzhardinge <jeremy@goop.org>
 L:	xen-devel@lists.xensource.com (moderated for non-subscribers)
 L:	virtualization@lists.linux-foundation.org
 S:	Supported
@@ -7432,7 +7443,8 @@ F:	drivers/xen/*swiotlb*
 
 XFS FILESYSTEM
 P:	Silicon Graphics Inc
-M:	Alex Elder <aelder@sgi.com>
+M:	Ben Myers <bpm@sgi.com>
+M:	Alex Elder <elder@kernel.org>
 M:	xfs-masters@oss.sgi.com
 L:	xfs@oss.sgi.com
 W:	http://oss.sgi.com/projects/xfs

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 2
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/arm/boot/Makefile

@@ -65,6 +65,8 @@ $(obj)/%.dtb: $(src)/dts/%.dts
 
 $(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y))
 
+clean-files := *.dtb
+
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \
 		   -C none -a $(LOADADDR) -e $(STARTADDR) \

arch/arm/boot/dts/tegra-ventana.dts

@@ -22,11 +22,10 @@
 	sdhci@c8000400 {
 		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
 		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
-		power-gpios = <&gpio 155 0>; /* gpio PT3 */
+		power-gpios = <&gpio 70 0>; /* gpio PI6 */
 	};
 
 	sdhci@c8000600 {
-		power-gpios = <&gpio 70 0>; /* gpio PI6 */
 		support-8bit;
 	};
 };

arch/arm/include/asm/hardware/cache-l2x0.h

@@ -20,6 +20,8 @@
 #ifndef __ASM_ARM_HARDWARE_L2X0_H
 #define __ASM_ARM_HARDWARE_L2X0_H
 
+#include <linux/errno.h>
+
 #define L2X0_CACHE_ID			0x000
 #define L2X0_CACHE_TYPE			0x004
 #define L2X0_CTRL			0x100

arch/arm/include/asm/mach/arch.h

@@ -13,6 +13,7 @@
 struct tag;
 struct meminfo;
 struct sys_timer;
+struct pt_regs;
 
 struct machine_desc {
 	unsigned int		nr;		/* architecture number	*/

arch/arm/include/asm/unistd.h

@@ -402,6 +402,8 @@
 #define __NR_syncfs			(__NR_SYSCALL_BASE+373)
 #define __NR_sendmmsg			(__NR_SYSCALL_BASE+374)
 #define __NR_setns			(__NR_SYSCALL_BASE+375)
+#define __NR_process_vm_readv		(__NR_SYSCALL_BASE+376)
+#define __NR_process_vm_writev		(__NR_SYSCALL_BASE+377)
 
 /*
  * The following SWIs are ARM private.

arch/arm/kernel/calls.S

@@ -385,6 +385,8 @@
 		CALL(sys_syncfs)
 		CALL(sys_sendmmsg)
 /* 375 */	CALL(sys_setns)
+		CALL(sys_process_vm_readv)
+		CALL(sys_process_vm_writev)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted

arch/arm/kernel/head.S

@@ -360,7 +360,7 @@ __secondary_data:
  *  r13 = *virtual* address to jump to upon completion
  */
 __enable_mmu:
-#ifdef CONFIG_ALIGNMENT_TRAP
+#if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6
 	orr	r0, r0, #CR_A
 #else
 	bic	r0, r0, #CR_A

arch/arm/kernel/machine_kexec.c

@@ -32,24 +32,6 @@ static atomic_t waiting_for_crash_ipi;
 
 int machine_kexec_prepare(struct kimage *image)
 {
-	unsigned long page_list;
-	void *reboot_code_buffer;
-	page_list = image->head & PAGE_MASK;
-
-	reboot_code_buffer = page_address(image->control_code_page);
-
-	/* Prepare parameters for reboot_code_buffer*/
-	kexec_start_address = image->start;
-	kexec_indirection_page = page_list;
-	kexec_mach_type = machine_arch_type;
-	kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET;
-
-	/* copy our kernel relocation code to the control code page */
-	memcpy(reboot_code_buffer,
-	       relocate_new_kernel, relocate_new_kernel_size);
-
-	flush_icache_range((unsigned long) reboot_code_buffer,
-			   (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
 	return 0;
 }
 
@@ -100,14 +82,31 @@ void (*kexec_reinit)(void);
 
 void machine_kexec(struct kimage *image)
 {
+	unsigned long page_list;
 	unsigned long reboot_code_buffer_phys;
 	void *reboot_code_buffer;
 
+
+	page_list = image->head & PAGE_MASK;
+
 	/* we need both effective and real address here */
 	reboot_code_buffer_phys =
 	    page_to_pfn(image->control_code_page) << PAGE_SHIFT;
 	reboot_code_buffer = page_address(image->control_code_page);
 
+	/* Prepare parameters for reboot_code_buffer*/
+	kexec_start_address = image->start;
+	kexec_indirection_page = page_list;
+	kexec_mach_type = machine_arch_type;
+	kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET;
+
+	/* copy our kernel relocation code to the control code page */
+	memcpy(reboot_code_buffer,
+	       relocate_new_kernel, relocate_new_kernel_size);
+
+
+	flush_icache_range((unsigned long) reboot_code_buffer,
+			   (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
 	printk(KERN_INFO "Bye!\n");
 
 	if (kexec_reinit)

arch/arm/kernel/setup.c

@@ -461,8 +461,10 @@ static void __init setup_processor(void)
 	       cpu_name, read_cpuid_id(), read_cpuid_id() & 15,
 	       proc_arch[cpu_architecture()], cr_alignment);
 
-	sprintf(init_utsname()->machine, "%s%c", list->arch_name, ENDIANNESS);
-	sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS);
+	snprintf(init_utsname()->machine, __NEW_UTS_LEN + 1, "%s%c",
+		 list->arch_name, ENDIANNESS);
+	snprintf(elf_platform, ELF_PLATFORM_SIZE, "%s%c",
+		 list->elf_name, ENDIANNESS);
 	elf_hwcap = list->elf_hwcap;
 #ifndef CONFIG_ARM_THUMB
 	elf_hwcap &= ~HWCAP_THUMB;

arch/arm/mach-at91/at91cap9_devices.c

@@ -98,7 +98,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB HS Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
 
 static struct resource usba_udc_resources[] = {
 	[0] = {
@@ -1021,8 +1021,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -1035,7 +1035,6 @@ static struct resource dbgu_resources[] = {
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);

arch/arm/mach-at91/at91rm9200_devices.c

@@ -877,8 +877,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -891,7 +891,6 @@ static struct resource dbgu_resources[] = {
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);

arch/arm/mach-at91/at91sam9260_devices.c

@@ -837,8 +837,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -851,7 +851,6 @@ static struct resource dbgu_resources[] = {
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);

arch/arm/mach-at91/at91sam9261_devices.c

@@ -816,8 +816,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -830,7 +830,6 @@ static struct resource dbgu_resources[] = {
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);

arch/arm/mach-at91/at91sam9263_devices.c

@@ -1196,8 +1196,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -1210,7 +1210,6 @@ static struct resource dbgu_resources[] = {
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);

arch/arm/mach-at91/at91sam9g45_devices.c

@@ -197,7 +197,7 @@ void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) {}
  *  USB HS Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
 static struct resource usba_udc_resources[] = {
 	[0] = {
 		.start	= AT91SAM9G45_UDPHS_FIFO,
@@ -1332,8 +1332,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -1346,7 +1346,6 @@ static struct resource dbgu_resources[] = {
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);

arch/arm/mach-at91/at91sam9rl_devices.c

@@ -75,7 +75,7 @@ void __init at91_add_device_hdmac(void) {}
  *  USB HS Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
 
 static struct resource usba_udc_resources[] = {
 	[0] = {
@@ -908,8 +908,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 #if defined(CONFIG_SERIAL_ATMEL)
 static struct resource dbgu_resources[] = {
 	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.start	= AT91_BASE_SYS + AT91_DBGU,
+		.end	= AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -922,7 +922,6 @@ static struct resource dbgu_resources[] = {
 static struct atmel_uart_data dbgu_data = {
 	.use_dma_tx	= 0,
 	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 };
 
 static u64 dbgu_dmamask = DMA_BIT_MASK(32);

arch/arm/mach-at91/board-yl-9200.c

@@ -384,7 +384,7 @@ static struct spi_board_info yl9200_spi_devices[] = {
 #include <video/s1d13xxxfb.h>
 
 
-static void __init yl9200_init_video(void)
+static void yl9200_init_video(void)
 {
 	/* NWAIT Signal */
 	at91_set_A_periph(AT91_PIN_PC6, 0);

arch/arm/mach-at91/include/mach/vmalloc.h

@@ -21,6 +21,8 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
+#include <mach/hardware.h>
+
 #define VMALLOC_END		(AT91_VIRT_BASE & PGDIR_MASK)
 
 #endif

arch/arm/mach-bcmring/core.c

@@ -235,7 +235,7 @@ void __init bcmring_init_timer(void)
 	 */
 	bcmring_clocksource_init();
 
-	sp804_clockevents_register(TIMER0_VA_BASE, IRQ_TIMER0, "timer0");
+	sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMER0, "timer0");
 }
 
 struct sys_timer bcmring_timer = {

arch/arm/mach-bcmring/dma.c

@@ -36,6 +36,7 @@
 #include <linux/mm.h>
 #include <linux/pfn.h>
 #include <linux/atomic.h>
+#include <linux/sched.h>
 #include <mach/dma.h>
 
 /* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */

arch/arm/mach-imx/Makefile.boot

@@ -1,22 +1,26 @@
-zreladdr-$(CONFIG_ARCH_MX1)	+= 0x08008000
-params_phys-$(CONFIG_ARCH_MX1)	:= 0x08000100
-initrd_phys-$(CONFIG_ARCH_MX1)	:= 0x08800000
+zreladdr-$(CONFIG_SOC_IMX1)	+= 0x08008000
+params_phys-$(CONFIG_SOC_IMX1)	:= 0x08000100
+initrd_phys-$(CONFIG_SOC_IMX1)	:= 0x08800000
 
-zreladdr-$(CONFIG_MACH_MX21)	+= 0xC0008000
-params_phys-$(CONFIG_MACH_MX21)	:= 0xC0000100
-initrd_phys-$(CONFIG_MACH_MX21)	:= 0xC0800000
+zreladdr-$(CONFIG_SOC_IMX21)	+= 0xC0008000
+params_phys-$(CONFIG_SOC_IMX21)	:= 0xC0000100
+initrd_phys-$(CONFIG_SOC_IMX21)	:= 0xC0800000
 
-zreladdr-$(CONFIG_ARCH_MX25)	+= 0x80008000
-params_phys-$(CONFIG_ARCH_MX25)	:= 0x80000100
-initrd_phys-$(CONFIG_ARCH_MX25)	:= 0x80800000
+zreladdr-$(CONFIG_SOC_IMX25)	+= 0x80008000
+params_phys-$(CONFIG_SOC_IMX25)	:= 0x80000100
+initrd_phys-$(CONFIG_SOC_IMX25)	:= 0x80800000
 
-zreladdr-$(CONFIG_MACH_MX27)	+= 0xA0008000
-params_phys-$(CONFIG_MACH_MX27)	:= 0xA0000100
-initrd_phys-$(CONFIG_MACH_MX27)	:= 0xA0800000
+zreladdr-$(CONFIG_SOC_IMX27)	+= 0xA0008000
+params_phys-$(CONFIG_SOC_IMX27)	:= 0xA0000100
+initrd_phys-$(CONFIG_SOC_IMX27)	:= 0xA0800000
 
-zreladdr-$(CONFIG_ARCH_MX3)	+= 0x80008000
-params_phys-$(CONFIG_ARCH_MX3)	:= 0x80000100
-initrd_phys-$(CONFIG_ARCH_MX3)	:= 0x80800000
+zreladdr-$(CONFIG_SOC_IMX31)	+= 0x80008000
+params_phys-$(CONFIG_SOC_IMX31)	:= 0x80000100
+initrd_phys-$(CONFIG_SOC_IMX31)	:= 0x80800000
+
+zreladdr-$(CONFIG_SOC_IMX35)	+= 0x80008000
+params_phys-$(CONFIG_SOC_IMX35)	:= 0x80000100
+initrd_phys-$(CONFIG_SOC_IMX35)	:= 0x80800000
 
 zreladdr-$(CONFIG_SOC_IMX6Q)	+= 0x10008000
 params_phys-$(CONFIG_SOC_IMX6Q)	:= 0x10000100

arch/arm/mach-imx/clock-imx6q.c

@@ -1139,7 +1139,7 @@ static int _clk_set_rate(struct clk *clk, unsigned long rate)
 		return -EINVAL;
 
 	max_div = ((d->bm_pred >> d->bp_pred) + 1) *
-		  ((d->bm_pred >> d->bp_pred) + 1);
+		  ((d->bm_podf >> d->bp_podf) + 1);
 
 	div = parent_rate / rate;
 	if (div == 0)
@@ -2002,6 +2002,21 @@ int __init mx6q_clocks_init(void)
 	clk_set_rate(&asrc_serial_clk, 1500000);
 	clk_set_rate(&enfc_clk, 11000000);
 
+	/*
+	 * Before pinctrl API is available, we have to rely on the pad
+	 * configuration set up by bootloader.  For usdhc example here,
+	 * u-boot sets up the pads for 49.5 MHz case, and we have to lower
+	 * the usdhc clock from 198 to 49.5 MHz to match the pad configuration.
+	 *
+	 * FIXME: This is should be removed after pinctrl API is available.
+	 * At that time, usdhc driver can call pinctrl API to change pad
+	 * configuration dynamically per different usdhc clock settings.
+	 */
+	clk_set_rate(&usdhc1_clk, 49500000);
+	clk_set_rate(&usdhc2_clk, 49500000);
+	clk_set_rate(&usdhc3_clk, 49500000);
+	clk_set_rate(&usdhc4_clk, 49500000);
+
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
 	base = of_iomap(np, 0);
 	WARN_ON(!base);

arch/arm/mach-msm/Makefile

@@ -15,6 +15,8 @@ obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
 obj-$(CONFIG_MSM_SMD) += last_radio_log.o
 obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o
 
+CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
+
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
 obj-$(CONFIG_SMP) += headsmp.o platsmp.o
 

arch/arm/mach-msm/board-msm7x30.c

@@ -42,8 +42,8 @@
 
 extern struct sys_timer msm_timer;
 
-static void __init msm7x30_fixup(struct machine_desc *desc, struct tag *tag,
-			 char **cmdline, struct meminfo *mi)
+static void __init msm7x30_fixup(struct tag *tag, char **cmdline,
+		struct meminfo *mi)
 {
 	for (; tag->hdr.size; tag = tag_next(tag))
 		if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) {

arch/arm/mach-msm/board-msm8960.c

@@ -32,8 +32,8 @@
 
 #include "devices.h"
 
-static void __init msm8960_fixup(struct machine_desc *desc, struct tag *tag,
-			 char **cmdline, struct meminfo *mi)
+static void __init msm8960_fixup(struct tag *tag, char **cmdline,
+		struct meminfo *mi)
 {
 	for (; tag->hdr.size; tag = tag_next(tag))
 		if (tag->hdr.tag == ATAG_MEM &&

arch/arm/mach-msm/board-msm8x60.c

@@ -28,8 +28,8 @@
 #include <mach/board.h>
 #include <mach/msm_iomap.h>
 
-static void __init msm8x60_fixup(struct machine_desc *desc, struct tag *tag,
-			 char **cmdline, struct meminfo *mi)
+static void __init msm8x60_fixup(struct tag *tag, char **cmdline,
+		struct meminfo *mi)
 {
 	for (; tag->hdr.size; tag = tag_next(tag))
 		if (tag->hdr.tag == ATAG_MEM &&

arch/arm/mach-msm/scm.c

@@ -180,6 +180,9 @@ static u32 smc(u32 cmd_addr)
 			__asmeq("%1", "r0")
 			__asmeq("%2", "r1")
 			__asmeq("%3", "r2")
+#ifdef REQUIRES_SEC
+			".arch_extension sec\n"
+#endif
 			"smc	#0	@ switch to secure world\n"
 			: "=r" (r0)
 			: "r" (r0), "r" (r1), "r" (r2)

arch/arm/mach-mx5/clock-mx51-mx53.c

@@ -1281,9 +1281,9 @@ DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
 	NULL,  NULL, &ipg_clk, &gpt_ipg_clk);
 
 DEFINE_CLOCK(pwm1_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG6_OFFSET,
-	NULL, NULL, &ipg_clk, NULL);
+	NULL, NULL, &ipg_perclk, NULL);
 DEFINE_CLOCK(pwm2_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG8_OFFSET,
-	NULL, NULL, &ipg_clk, NULL);
+	NULL, NULL, &ipg_perclk, NULL);
 
 /* I2C */
 DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET,
@@ -1634,6 +1634,7 @@ int __init mx53_clocks_init(unsigned long ckil, unsigned long osc,
 	return 0;
 }
 
+#ifdef CONFIG_OF
 static void __init clk_get_freq_dt(unsigned long *ckil, unsigned long *osc,
 				   unsigned long *ckih1, unsigned long *ckih2)
 {
@@ -1671,3 +1672,4 @@ int __init mx53_clocks_init_dt(void)
 	clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
 	return mx53_clocks_init(ckil, osc, ckih1, ckih2);
 }
+#endif

arch/arm/mach-mxs/mach-mx28evk.c

@@ -471,7 +471,8 @@ static void __init mx28evk_init(void)
 			       "mmc0-slot-power");
 	if (ret)
 		pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
-	mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
+	else
+		mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
 
 	ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW,
 			       "mmc1-slot-power");
@@ -480,7 +481,6 @@ static void __init mx28evk_init(void)
 	else
 		mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
 
-	mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
 	mx28_add_rtc_stmp3xxx();
 
 	gpio_led_register_device(0, &mx28evk_led_data);

arch/arm/mach-picoxcell/include/mach/debug-macro.S

@@ -14,7 +14,7 @@
 
 #define UART_SHIFT 2
 
-		.macro	addruart, rp, rv
+		.macro	addruart, rp, rv, tmp
 		ldr	\rv, =PHYS_TO_IO(PICOXCELL_UART1_BASE)
 		ldr	\rp, =PICOXCELL_UART1_BASE
 		.endm

arch/arm/mach-shmobile/Makefile

@@ -3,7 +3,7 @@
 #
 
 # Common objects
-obj-y				:= timer.o console.o clock.o pm_runtime.o
+obj-y				:= timer.o console.o clock.o
 
 # CPU objects
 obj-$(CONFIG_ARCH_SH7367)	+= setup-sh7367.o clock-sh7367.o intc-sh7367.o

arch/arm/mach-shmobile/board-ag5evm.c

@@ -515,14 +515,14 @@ static void __init ag5evm_init(void)
 	/* enable MMCIF */
 	gpio_request(GPIO_FN_MMCCLK0, NULL);
 	gpio_request(GPIO_FN_MMCCMD0_PU, NULL);
-	gpio_request(GPIO_FN_MMCD0_0, NULL);
-	gpio_request(GPIO_FN_MMCD0_1, NULL);
-	gpio_request(GPIO_FN_MMCD0_2, NULL);
-	gpio_request(GPIO_FN_MMCD0_3, NULL);
-	gpio_request(GPIO_FN_MMCD0_4, NULL);
-	gpio_request(GPIO_FN_MMCD0_5, NULL);
-	gpio_request(GPIO_FN_MMCD0_6, NULL);
-	gpio_request(GPIO_FN_MMCD0_7, NULL);
+	gpio_request(GPIO_FN_MMCD0_0_PU, NULL);
+	gpio_request(GPIO_FN_MMCD0_1_PU, NULL);
+	gpio_request(GPIO_FN_MMCD0_2_PU, NULL);
+	gpio_request(GPIO_FN_MMCD0_3_PU, NULL);
+	gpio_request(GPIO_FN_MMCD0_4_PU, NULL);
+	gpio_request(GPIO_FN_MMCD0_5_PU, NULL);
+	gpio_request(GPIO_FN_MMCD0_6_PU, NULL);
+	gpio_request(GPIO_FN_MMCD0_7_PU, NULL);
 	gpio_request(GPIO_PORT208, NULL); /* Reset */
 	gpio_direction_output(GPIO_PORT208, 1);
 

arch/arm/mach-shmobile/board-ap4evb.c

@@ -201,7 +201,7 @@ static struct physmap_flash_data nor_flash_data = {
 static struct resource nor_flash_resources[] = {
 	[0]	= {
 		.start	= 0x20000000, /* CS0 shadow instead of regular CS0 */
-		.end	= 0x28000000 - 1, /* needed by USB MASK ROM boot */		
+		.end	= 0x28000000 - 1, /* needed by USB MASK ROM boot */
 		.flags	= IORESOURCE_MEM,
 	}
 };

arch/arm/mach-shmobile/board-kota2.c

@@ -48,6 +48,7 @@
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/traps.h>
 
+/* SMSC 9220 */
 static struct resource smsc9220_resources[] = {
 	[0] = {
 		.start		= 0x14000000, /* CS5A */
@@ -77,6 +78,7 @@ static struct platform_device eth_device = {
 	.num_resources	= ARRAY_SIZE(smsc9220_resources),
 };
 
+/* KEYSC */
 static struct sh_keysc_info keysc_platdata = {
 	.mode		= SH_KEYSC_MODE_6,
 	.scan_timing	= 3,
@@ -120,6 +122,7 @@ static struct platform_device keysc_device = {
 	},
 };
 
+/* GPIO KEY */
 #define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
 
 static struct gpio_keys_button gpio_buttons[] = {
@@ -150,6 +153,7 @@ static struct platform_device gpio_keys_device = {
 	},
 };
 
+/* GPIO LED */
 #define GPIO_LED(n, g) { .name = n, .gpio = g }
 
 static struct gpio_led gpio_leds[] = {
@@ -175,6 +179,7 @@ static struct platform_device gpio_leds_device = {
 	},
 };
 
+/* MMCIF */
 static struct resource mmcif_resources[] = {
 	[0] = {
 		.name   = "MMCIF",
@@ -207,6 +212,7 @@ static struct platform_device mmcif_device = {
 	.resource       = mmcif_resources,
 };
 
+/* SDHI0 */
 static struct sh_mobile_sdhi_info sdhi0_info = {
 	.tmio_caps      = MMC_CAP_SD_HIGHSPEED,
 	.tmio_flags     = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
@@ -243,6 +249,7 @@ static struct platform_device sdhi0_device = {
 	},
 };
 
+/* SDHI1 */
 static struct sh_mobile_sdhi_info sdhi1_info = {
 	.tmio_caps      = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
 	.tmio_flags     = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,

arch/arm/mach-shmobile/clock-sh7372.c

@@ -476,7 +476,7 @@ static struct clk_ops fsidiv_clk_ops = {
 	.disable	= fsidiv_disable,
 };
 
-static struct clk_mapping sh7372_fsidiva_clk_mapping = {
+static struct clk_mapping fsidiva_clk_mapping = {
 	.phys	= FSIDIVA,
 	.len	= 8,
 };
@@ -484,10 +484,10 @@ static struct clk_mapping sh7372_fsidiva_clk_mapping = {
 struct clk sh7372_fsidiva_clk = {
 	.ops		= &fsidiv_clk_ops,
 	.parent		= &div6_reparent_clks[DIV6_FSIA], /* late install */
-	.mapping	= &sh7372_fsidiva_clk_mapping,
+	.mapping	= &fsidiva_clk_mapping,
 };
 
-static struct clk_mapping sh7372_fsidivb_clk_mapping = {
+static struct clk_mapping fsidivb_clk_mapping = {
 	.phys	= FSIDIVB,
 	.len	= 8,
 };
@@ -495,7 +495,7 @@ static struct clk_mapping sh7372_fsidivb_clk_mapping = {
 struct clk sh7372_fsidivb_clk = {
 	.ops		= &fsidiv_clk_ops,
 	.parent		= &div6_reparent_clks[DIV6_FSIB],  /* late install */
-	.mapping	= &sh7372_fsidivb_clk_mapping,
+	.mapping	= &fsidivb_clk_mapping,
 };
 
 static struct clk *late_main_clks[] = {

arch/arm/mach-shmobile/cpuidle.c

@@ -26,65 +26,59 @@ void (*shmobile_cpuidle_modes[CPUIDLE_STATE_MAX])(void) = {
 };
 
 static int shmobile_cpuidle_enter(struct cpuidle_device *dev,
-				  struct cpuidle_state *state)
+				  struct cpuidle_driver *drv,
+				  int index)
 {
 	ktime_t before, after;
-	int requested_state = state - &dev->states[0];
 
-	dev->last_state = &dev->states[requested_state];
 	before = ktime_get();
 
 	local_irq_disable();
 	local_fiq_disable();
 
-	shmobile_cpuidle_modes[requested_state]();
+	shmobile_cpuidle_modes[index]();
 
 	local_irq_enable();
 	local_fiq_enable();
 
 	after = ktime_get();
-	return ktime_to_ns(ktime_sub(after, before)) >> 10;
+	dev->last_residency = ktime_to_ns(ktime_sub(after, before)) >> 10;
+
+	return index;
 }
 
 static struct cpuidle_device shmobile_cpuidle_dev;
 static struct cpuidle_driver shmobile_cpuidle_driver = {
 	.name =		"shmobile_cpuidle",
 	.owner =	THIS_MODULE,
+	.states[0] = {
+		.name = "C1",
+		.desc = "WFI",
+		.exit_latency = 1,
+		.target_residency = 1 * 2,
+		.flags = CPUIDLE_FLAG_TIME_VALID,
+	},
+	.safe_state_index = 0, /* C1 */
+	.state_count = 1,
 };
 
-void (*shmobile_cpuidle_setup)(struct cpuidle_device *dev);
+void (*shmobile_cpuidle_setup)(struct cpuidle_driver *drv);
 
 static int shmobile_cpuidle_init(void)
 {
 	struct cpuidle_device *dev = &shmobile_cpuidle_dev;
-	struct cpuidle_state *state;
+	struct cpuidle_driver *drv = &shmobile_cpuidle_driver;
 	int i;
 
-	cpuidle_register_driver(&shmobile_cpuidle_driver);
-
-	for (i = 0; i < CPUIDLE_STATE_MAX; i++) {
-		dev->states[i].name[0] = '\0';
-		dev->states[i].desc[0] = '\0';
-		dev->states[i].enter = shmobile_cpuidle_enter;
-	}
-
-	i = CPUIDLE_DRIVER_STATE_START;
-
-	state = &dev->states[i++];
-	snprintf(state->name, CPUIDLE_NAME_LEN, "C1");
-	strncpy(state->desc, "WFI", CPUIDLE_DESC_LEN);
-	state->exit_latency = 1;
-	state->target_residency = 1 * 2;
-	state->power_usage = 3;
-	state->flags = 0;
-	state->flags |= CPUIDLE_FLAG_TIME_VALID;
-
-	dev->safe_state = state;
-	dev->state_count = i;
+	for (i = 0; i < CPUIDLE_STATE_MAX; i++)
+		drv->states[i].enter = shmobile_cpuidle_enter;
 
 	if (shmobile_cpuidle_setup)
-		shmobile_cpuidle_setup(dev);
+		shmobile_cpuidle_setup(drv);
+
+	cpuidle_register_driver(drv);
 
+	dev->state_count = drv->state_count;
 	cpuidle_register_device(dev);
 
 	return 0;

arch/arm/mach-shmobile/include/mach/common.h

@@ -9,9 +9,9 @@ extern int clk_init(void);
 extern void shmobile_handle_irq_intc(struct pt_regs *);
 extern void shmobile_handle_irq_gic(struct pt_regs *);
 extern struct platform_suspend_ops shmobile_suspend_ops;
-struct cpuidle_device;
+struct cpuidle_driver;
 extern void (*shmobile_cpuidle_modes[])(void);
-extern void (*shmobile_cpuidle_setup)(struct cpuidle_device *dev);
+extern void (*shmobile_cpuidle_setup)(struct cpuidle_driver *drv);
 
 extern void sh7367_init_irq(void);
 extern void sh7367_add_early_devices(void);

arch/arm/mach-shmobile/include/mach/sh73a0.h

@@ -470,6 +470,14 @@ enum {
 	GPIO_FN_SDHICMD2_PU,
 	GPIO_FN_MMCCMD0_PU,
 	GPIO_FN_MMCCMD1_PU,
+	GPIO_FN_MMCD0_0_PU,
+	GPIO_FN_MMCD0_1_PU,
+	GPIO_FN_MMCD0_2_PU,
+	GPIO_FN_MMCD0_3_PU,
+	GPIO_FN_MMCD0_4_PU,
+	GPIO_FN_MMCD0_5_PU,
+	GPIO_FN_MMCD0_6_PU,
+	GPIO_FN_MMCD0_7_PU,
 	GPIO_FN_FSIACK_PU,
 	GPIO_FN_FSIAILR_PU,
 	GPIO_FN_FSIAIBT_PU,

arch/arm/mach-shmobile/pfc-sh7367.c

@@ -21,68 +21,49 @@
 #include <linux/gpio.h>
 #include <mach/sh7367.h>
 
-#define _1(fn, pfx, sfx) fn(pfx, sfx)
-
-#define _10(fn, pfx, sfx)				\
-	_1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx),	\
-	_1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx),	\
-	_1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx),	\
-	_1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx),	\
-	_1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
-
-#define _90(fn, pfx, sfx)				\
-	_10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx),	\
-	_10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx),	\
-	_10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx),	\
-	_10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx),	\
-	_10(fn, pfx##9, sfx)
-
-#define _273(fn, pfx, sfx)		\
-	_10(fn, pfx, sfx), _90(fn, pfx, sfx),		\
-	_10(fn, pfx##10, sfx), _90(fn, pfx##1, sfx),	\
-	_10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx),	\
-	_10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx),	\
-	_10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx),	\
-	_10(fn, pfx##26, sfx), _1(fn, pfx##270, sfx),	\
-	_1(fn, pfx##271, sfx), _1(fn, pfx##272, sfx)
-
-#define _PORT(pfx, sfx) pfx##_##sfx
-#define PORT_273(str) _273(_PORT, PORT, str)
+#define CPU_ALL_PORT(fn, pfx, sfx)				\
+	PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx),		\
+	PORT_10(fn, pfx##10, sfx), PORT_90(fn, pfx##1, sfx),	\
+	PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx),	\
+	PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx),	\
+	PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx),	\
+	PORT_10(fn, pfx##26, sfx), PORT_1(fn, pfx##270, sfx),	\
+	PORT_1(fn, pfx##271, sfx), PORT_1(fn, pfx##272, sfx)
 
 enum {
 	PINMUX_RESERVED = 0,
 
 	PINMUX_DATA_BEGIN,
-	PORT_273(DATA), /* PORT0_DATA -> PORT272_DATA */
+	PORT_ALL(DATA), /* PORT0_DATA -> PORT272_DATA */
 	PINMUX_DATA_END,
 
 	PINMUX_INPUT_BEGIN,
-	PORT_273(IN), /* PORT0_IN -> PORT272_IN */
+	PORT_ALL(IN), /* PORT0_IN -> PORT272_IN */
 	PINMUX_INPUT_END,
 
 	PINMUX_INPUT_PULLUP_BEGIN,
-	PORT_273(IN_PU), /* PORT0_IN_PU -> PORT272_IN_PU */
+	PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT272_IN_PU */
 	PINMUX_INPUT_PULLUP_END,
 
 	PINMUX_INPUT_PULLDOWN_BEGIN,
-	PORT_273(IN_PD), /* PORT0_IN_PD -> PORT272_IN_PD */
+	PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT272_IN_PD */
 	PINMUX_INPUT_PULLDOWN_END,
 
 	PINMUX_OUTPUT_BEGIN,
-	PORT_273(OUT), /* PORT0_OUT -> PORT272_OUT */
+	PORT_ALL(OUT), /* PORT0_OUT -> PORT272_OUT */
 	PINMUX_OUTPUT_END,
 
 	PINMUX_FUNCTION_BEGIN,
-	PORT_273(FN_IN), /* PORT0_FN_IN -> PORT272_FN_IN */
-	PORT_273(FN_OUT), /* PORT0_FN_OUT -> PORT272_FN_OUT */
-	PORT_273(FN0), /* PORT0_FN0 -> PORT272_FN0 */
-	PORT_273(FN1), /* PORT0_FN1 -> PORT272_FN1 */
-	PORT_273(FN2), /* PORT0_FN2 -> PORT272_FN2 */
-	PORT_273(FN3), /* PORT0_FN3 -> PORT272_FN3 */
-	PORT_273(FN4), /* PORT0_FN4 -> PORT272_FN4 */
-	PORT_273(FN5), /* PORT0_FN5 -> PORT272_FN5 */
-	PORT_273(FN6), /* PORT0_FN6 -> PORT272_FN6 */
-	PORT_273(FN7), /* PORT0_FN7 -> PORT272_FN7 */
+	PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT272_FN_IN */
+	PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT272_FN_OUT */
+	PORT_ALL(FN0), /* PORT0_FN0 -> PORT272_FN0 */
+	PORT_ALL(FN1), /* PORT0_FN1 -> PORT272_FN1 */
+	PORT_ALL(FN2), /* PORT0_FN2 -> PORT272_FN2 */
+	PORT_ALL(FN3), /* PORT0_FN3 -> PORT272_FN3 */
+	PORT_ALL(FN4), /* PORT0_FN4 -> PORT272_FN4 */
+	PORT_ALL(FN5), /* PORT0_FN5 -> PORT272_FN5 */
+	PORT_ALL(FN6), /* PORT0_FN6 -> PORT272_FN6 */
+	PORT_ALL(FN7), /* PORT0_FN7 -> PORT272_FN7 */
 
 	MSELBCR_MSEL2_1, MSELBCR_MSEL2_0,
 	PINMUX_FUNCTION_END,
@@ -327,41 +308,6 @@ enum {
 	PINMUX_MARK_END,
 };
 
-#define PORT_DATA_I(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
-
-#define PORT_DATA_I_PD(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD)
-
-#define PORT_DATA_I_PU(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
-		    PORT##nr##_IN, PORT##nr##_IN_PU)
-
-#define PORT_DATA_I_PU_PD(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
-#define PORT_DATA_O(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
-
-#define PORT_DATA_IO(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN)
-
-#define PORT_DATA_IO_PD(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD)
-
-#define PORT_DATA_IO_PU(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN, PORT##nr##_IN_PU)
-
-#define PORT_DATA_IO_PU_PD(nr) \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
-
 static pinmux_enum_t pinmux_data[] = {
 
 	/* specify valid pin states for each pin in GPIO mode */
@@ -1098,13 +1044,9 @@ static pinmux_enum_t pinmux_data[] = {
 	PINMUX_DATA(DIVLOCK_MARK, PORT272_FN1),
 };
 
-#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
-#define GPIO_PORT_273() _273(_GPIO_PORT, , unused)
-#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
-
 static struct pinmux_gpio pinmux_gpios[] = {
 	/* 49-1 -> 49-6 (GPIO) */
-	GPIO_PORT_273(),
+	GPIO_PORT_ALL(),
 
 	/* Special Pull-up / Pull-down Functions */
 	GPIO_FN(PORT48_KEYIN0_PU), GPIO_FN(PORT49_KEYIN1_PU),
@@ -1345,22 +1287,6 @@ static struct pinmux_gpio pinmux_gpios[] = {
 	GPIO_FN(DIVLOCK),
 };
 
-/* helper for top 4 bits in PORTnCR */
-#define PCRH(in, in_pd, in_pu, out)		\
-	0, (out), (in), 0,			\
-	0, 0, 0, 0,				\
-	0, 0, (in_pd), 0,			\
-	0, 0, (in_pu), 0
-
-#define PORTCR(nr, reg)						\
-	{ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {		\
-		PCRH(PORT##nr##_IN, PORT##nr##_IN_PD,		\
-		     PORT##nr##_IN_PU, PORT##nr##_OUT),		\
-		PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2,	\
-		PORT##nr##_FN3,	PORT##nr##_FN4, PORT##nr##_FN5,	\
-		PORT##nr##_FN6, PORT##nr##_FN7 }		\
-	}
-
 static struct pinmux_cfg_reg pinmux_config_regs[] = {
 	PORTCR(0, 0xe6050000), /* PORT0CR */
 	PORTCR(1, 0xe6050001), /* PORT1CR */

arch/arm/mach-shmobile/pfc-sh7372.c

@@ -25,27 +25,13 @@
 #include <linux/gpio.h>
 #include <mach/sh7372.h>
 
-#define _1(fn, pfx, sfx) fn(pfx, sfx)
-
-#define _10(fn, pfx, sfx)				\
-	_1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx),	\
-	_1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx),	\
-	_1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx),	\
-	_1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx),	\
-	_1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
-
-#define _80(fn, pfx, sfx)				\
-	_10(fn, pfx##1, sfx),	_10(fn, pfx##2, sfx),	\
-	_10(fn, pfx##3, sfx),	_10(fn, pfx##4, sfx),	\
-	_10(fn, pfx##5, sfx),	_10(fn, pfx##6, sfx),	\
-	_10(fn, pfx##7, sfx),	_10(fn, pfx##8, sfx)
-
-#define _190(fn, pfx, sfx) \
-	_10(fn, pfx, sfx), _80(fn, pfx, sfx), _10(fn, pfx##9, sfx), \
-	_10(fn, pfx##10, sfx), _80(fn, pfx##1, sfx), _1(fn, pfx##190, sfx)
-
-#define _PORT(pfx, sfx) pfx##_##sfx
-#define PORT_ALL(str) _190(_PORT, PORT, str)
+#define CPU_ALL_PORT(fn, pfx, sfx) \
+	PORT_10(fn, pfx, sfx),		PORT_90(fn, pfx, sfx), \
+	PORT_10(fn, pfx##10, sfx),	PORT_10(fn, pfx##11, sfx), \
+	PORT_10(fn, pfx##12, sfx),	PORT_10(fn, pfx##13, sfx), \
+	PORT_10(fn, pfx##14, sfx),	PORT_10(fn, pfx##15, sfx), \
+	PORT_10(fn, pfx##16, sfx),	PORT_10(fn, pfx##17, sfx), \
+	PORT_10(fn, pfx##18, sfx),	PORT_1(fn, pfx##190, sfx)
 
 enum {
 	PINMUX_RESERVED = 0,
@@ -381,108 +367,124 @@ enum {
 	PINMUX_MARK_END,
 };
 
-/* PORT_DATA_I_PD(nr) */
-#define _I___D(nr)			     \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD)
-
-/* PORT_DATA_I_PU(nr) */
-#define _I__U_(nr)			     \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
-		    PORT##nr##_IN, PORT##nr##_IN_PU)
-
-/* PORT_DATA_I_PU_PD(nr) */
-#define _I__UD(nr)			     \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
-/* PORT_DATA_O(nr) */
-#define __O___(nr)							\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
-
-/* PORT_DATA_IO(nr) */
-#define _IO___(nr)				     \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN)
-
-/* PORT_DATA_IO_PD(nr) */
-#define _IO__D(nr)					     \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD)
-
-/* PORT_DATA_IO_PU(nr) */
-#define _IO_U_(nr)					     \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN, PORT##nr##_IN_PU)
-
-/* PORT_DATA_IO_PU_PD(nr) */
-#define _IO_UD(nr)					     \
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
-		    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
-
 static pinmux_enum_t pinmux_data[] = {
 
 	/* specify valid pin states for each pin in GPIO mode */
-
-	_IO__D(0), _IO__D(1), __O___(2), _I___D(3), _I___D(4),
-	_I___D(5), _IO_UD(6), _I___D(7), _IO__D(8), __O___(9),
-
-	__O___(10), __O___(11), _IO_UD(12), _IO__D(13), _IO__D(14),
-	__O___(15), _IO__D(16), _IO__D(17), _I___D(18), _IO___(19),
-
-	_IO___(20), _IO___(21), _IO___(22), _IO___(23), _IO___(24),
-	_IO___(25), _IO___(26), _IO___(27), _IO___(28), _IO___(29),
-
-	_IO___(30), _IO___(31), _IO___(32), _IO___(33), _IO___(34),
-	_IO___(35), _IO___(36), _IO___(37), _IO___(38), _IO___(39),
-
-	_IO___(40), _IO___(41), _IO___(42), _IO___(43), _IO___(44),
-	_IO___(45), _IO_U_(46), _IO_U_(47), _IO_U_(48), _IO_U_(49),
-
-	_IO_U_(50), _IO_U_(51), _IO_U_(52), _IO_U_(53), _IO_U_(54),
-	_IO_U_(55), _IO_U_(56), _IO_U_(57), _IO_U_(58), _IO_U_(59),
-
-	_IO_U_(60), _IO_U_(61), _IO___(62), __O___(63), __O___(64),
-	_IO_U_(65), __O___(66), _IO_U_(67), __O___(68), _IO___(69), /*66?*/
-
-	_IO___(70), _IO___(71), __O___(72), _I__U_(73), _I__UD(74),
-	_IO_UD(75), _IO_UD(76), _IO_UD(77), _IO_UD(78), _IO_UD(79),
-
-	_IO_UD(80), _IO_UD(81), _IO_UD(82), _IO_UD(83), _IO_UD(84),
-	_IO_UD(85), _IO_UD(86), _IO_UD(87), _IO_UD(88), _IO_UD(89),
-
-	_IO_UD(90), _IO_UD(91), _IO_UD(92), _IO_UD(93), _IO_UD(94),
-	_IO_UD(95), _IO_U_(96), _IO_UD(97), _IO_UD(98), __O___(99), /*99?*/
-
-	_IO__D(100), _IO__D(101), _IO__D(102), _IO__D(103), _IO__D(104),
-	_IO__D(105), _IO_U_(106), _IO_U_(107), _IO_U_(108), _IO_U_(109),
-
-	_IO_U_(110), _IO_U_(111), _IO__D(112), _IO__D(113), _IO_U_(114),
-	_IO_U_(115), _IO_U_(116), _IO_U_(117), _IO_U_(118), _IO_U_(119),
-
-	_IO_U_(120), _IO__D(121), _IO__D(122), _IO__D(123), _IO__D(124),
-	_IO__D(125), _IO__D(126), _IO__D(127), _IO__D(128), _IO_UD(129),
-
-	_IO_UD(130), _IO_UD(131), _IO_UD(132), _IO_UD(133), _IO_UD(134),
-	_IO_UD(135), _IO__D(136), _IO__D(137), _IO__D(138), _IO__D(139),
-
-	_IO__D(140), _IO__D(141), _IO__D(142), _IO_UD(143), _IO__D(144),
-	_IO__D(145), _IO__D(146), _IO__D(147), _IO__D(148), _IO__D(149),
-
-	_IO__D(150), _IO__D(151), _IO_UD(152), _I___D(153), _IO_UD(154),
-	_I___D(155), _IO__D(156), _IO__D(157), _I___D(158), _IO__D(159),
-
-	__O___(160), _IO__D(161), _IO__D(162), _IO__D(163), _I___D(164),
-	_IO__D(165), _I___D(166), _I___D(167), _I___D(168), _I___D(169),
-
-	_I___D(170), __O___(171), _IO_UD(172), _IO_UD(173), _IO_UD(174),
-	_IO_UD(175), _IO_UD(176), _IO_UD(177), _IO_UD(178), __O___(179),
-
-	_IO_UD(180), _IO_UD(181), _IO_UD(182), _IO_UD(183), _IO_UD(184),
-	__O___(185), _IO_UD(186), _IO_UD(187), _IO_UD(188), _IO_UD(189),
-
-	_IO_UD(190),
+	PORT_DATA_IO_PD(0),		PORT_DATA_IO_PD(1),
+	PORT_DATA_O(2),			PORT_DATA_I_PD(3),
+	PORT_DATA_I_PD(4),		PORT_DATA_I_PD(5),
+	PORT_DATA_IO_PU_PD(6),		PORT_DATA_I_PD(7),
+	PORT_DATA_IO_PD(8),		PORT_DATA_O(9),
+
+	PORT_DATA_O(10),		PORT_DATA_O(11),
+	PORT_DATA_IO_PU_PD(12),		PORT_DATA_IO_PD(13),
+	PORT_DATA_IO_PD(14),		PORT_DATA_O(15),
+	PORT_DATA_IO_PD(16),		PORT_DATA_IO_PD(17),
+	PORT_DATA_I_PD(18),		PORT_DATA_IO(19),
+
+	PORT_DATA_IO(20),		PORT_DATA_IO(21),
+	PORT_DATA_IO(22),		PORT_DATA_IO(23),
+	PORT_DATA_IO(24),		PORT_DATA_IO(25),
+	PORT_DATA_IO(26),		PORT_DATA_IO(27),
+	PORT_DATA_IO(28),		PORT_DATA_IO(29),
+
+	PORT_DATA_IO(30),		PORT_DATA_IO(31),
+	PORT_DATA_IO(32),		PORT_DATA_IO(33),
+	PORT_DATA_IO(34),		PORT_DATA_IO(35),
+	PORT_DATA_IO(36),		PORT_DATA_IO(37),
+	PORT_DATA_IO(38),		PORT_DATA_IO(39),
+
+	PORT_DATA_IO(40),		PORT_DATA_IO(41),
+	PORT_DATA_IO(42),		PORT_DATA_IO(43),
+	PORT_DATA_IO(44),		PORT_DATA_IO(45),
+	PORT_DATA_IO_PU(46),		PORT_DATA_IO_PU(47),
+	PORT_DATA_IO_PU(48),		PORT_DATA_IO_PU(49),
+
+	PORT_DATA_IO_PU(50),		PORT_DATA_IO_PU(51),
+	PORT_DATA_IO_PU(52),		PORT_DATA_IO_PU(53),
+	PORT_DATA_IO_PU(54),		PORT_DATA_IO_PU(55),
+	PORT_DATA_IO_PU(56),		PORT_DATA_IO_PU(57),
+	PORT_DATA_IO_PU(58),		PORT_DATA_IO_PU(59),
+
+	PORT_DATA_IO_PU(60),		PORT_DATA_IO_PU(61),
+	PORT_DATA_IO(62),		PORT_DATA_O(63),
+	PORT_DATA_O(64),		PORT_DATA_IO_PU(65),
+	PORT_DATA_O(66),		PORT_DATA_IO_PU(67),  /*66?*/
+	PORT_DATA_O(68),		PORT_DATA_IO(69),
+
+	PORT_DATA_IO(70),		PORT_DATA_IO(71),
+	PORT_DATA_O(72),		PORT_DATA_I_PU(73),
+	PORT_DATA_I_PU_PD(74),		PORT_DATA_IO_PU_PD(75),
+	PORT_DATA_IO_PU_PD(76),		PORT_DATA_IO_PU_PD(77),
+	PORT_DATA_IO_PU_PD(78),		PORT_DATA_IO_PU_PD(79),
+
+	PORT_DATA_IO_PU_PD(80),		PORT_DATA_IO_PU_PD(81),
+	PORT_DATA_IO_PU_PD(82),		PORT_DATA_IO_PU_PD(83),
+	PORT_DATA_IO_PU_PD(84),		PORT_DATA_IO_PU_PD(85),
+	PORT_DATA_IO_PU_PD(86),		PORT_DATA_IO_PU_PD(87),
+	PORT_DATA_IO_PU_PD(88),		PORT_DATA_IO_PU_PD(89),
+
+	PORT_DATA_IO_PU_PD(90),		PORT_DATA_IO_PU_PD(91),
+	PORT_DATA_IO_PU_PD(92),		PORT_DATA_IO_PU_PD(93),
+	PORT_DATA_IO_PU_PD(94),		PORT_DATA_IO_PU_PD(95),
+	PORT_DATA_IO_PU(96),		PORT_DATA_IO_PU_PD(97),
+	PORT_DATA_IO_PU_PD(98),		PORT_DATA_O(99), /*99?*/
+
+	PORT_DATA_IO_PD(100),		PORT_DATA_IO_PD(101),
+	PORT_DATA_IO_PD(102),		PORT_DATA_IO_PD(103),
+	PORT_DATA_IO_PD(104),		PORT_DATA_IO_PD(105),
+	PORT_DATA_IO_PU(106),		PORT_DATA_IO_PU(107),
+	PORT_DATA_IO_PU(108),		PORT_DATA_IO_PU(109),
+
+	PORT_DATA_IO_PU(110),		PORT_DATA_IO_PU(111),
+	PORT_DATA_IO_PD(112),		PORT_DATA_IO_PD(113),
+	PORT_DATA_IO_PU(114),		PORT_DATA_IO_PU(115),
+	PORT_DATA_IO_PU(116),		PORT_DATA_IO_PU(117),
+	PORT_DATA_IO_PU(118),		PORT_DATA_IO_PU(119),
+
+	PORT_DATA_IO_PU(120),		PORT_DATA_IO_PD(121),
+	PORT_DATA_IO_PD(122),		PORT_DATA_IO_PD(123),
+	PORT_DATA_IO_PD(124),		PORT_DATA_IO_PD(125),
+	PORT_DATA_IO_PD(126),		PORT_DATA_IO_PD(127),
+	PORT_DATA_IO_PD(128),		PORT_DATA_IO_PU_PD(129),
+
+	PORT_DATA_IO_PU_PD(130),	PORT_DATA_IO_PU_PD(131),
+	PORT_DATA_IO_PU_PD(132),	PORT_DATA_IO_PU_PD(133),
+	PORT_DATA_IO_PU_PD(134),	PORT_DATA_IO_PU_PD(135),
+	PORT_DATA_IO_PD(136),		PORT_DATA_IO_PD(137),
+	PORT_DATA_IO_PD(138),		PORT_DATA_IO_PD(139),
+
+	PORT_DATA_IO_PD(140),		PORT_DATA_IO_PD(141),
+	PORT_DATA_IO_PD(142),		PORT_DATA_IO_PU_PD(143),
+	PORT_DATA_IO_PD(144),		PORT_DATA_IO_PD(145),
+	PORT_DATA_IO_PD(146),		PORT_DATA_IO_PD(147),
+	PORT_DATA_IO_PD(148),		PORT_DATA_IO_PD(149),
+
+	PORT_DATA_IO_PD(150),		PORT_DATA_IO_PD(151),
+	PORT_DATA_IO_PU_PD(152),	PORT_DATA_I_PD(153),
+	PORT_DATA_IO_PU_PD(154),	PORT_DATA_I_PD(155),
+	PORT_DATA_IO_PD(156),		PORT_DATA_IO_PD(157),
+	PORT_DATA_I_PD(158),		PORT_DATA_IO_PD(159),
+
+	PORT_DATA_O(160),		PORT_DATA_IO_PD(161),
+	PORT_DATA_IO_PD(162),		PORT_DATA_IO_PD(163),
+	PORT_DATA_I_PD(164),		PORT_DATA_IO_PD(165),
+	PORT_DATA_I_PD(166),		PORT_DATA_I_PD(167),
+	PORT_DATA_I_PD(168),		PORT_DATA_I_PD(169),
+
+	PORT_DATA_I_PD(170),		PORT_DATA_O(171),
+	PORT_DATA_IO_PU_PD(172),	PORT_DATA_IO_PU_PD(173),
+	PORT_DATA_IO_PU_PD(174),	PORT_DATA_IO_PU_PD(175),
+	PORT_DATA_IO_PU_PD(176),	PORT_DATA_IO_PU_PD(177),
+	PORT_DATA_IO_PU_PD(178),	PORT_DATA_O(179),
+
+	PORT_DATA_IO_PU_PD(180),	PORT_DATA_IO_PU_PD(181),
+	PORT_DATA_IO_PU_PD(182),	PORT_DATA_IO_PU_PD(183),
+	PORT_DATA_IO_PU_PD(184),	PORT_DATA_O(185),
+	PORT_DATA_IO_PU_PD(186),	PORT_DATA_IO_PU_PD(187),
+	PORT_DATA_IO_PU_PD(188),	PORT_DATA_IO_PU_PD(189),
+
+	PORT_DATA_IO_PU_PD(190),
 
 	/* IRQ */
 	PINMUX_DATA(IRQ0_6_MARK,	PORT6_FN0, 	MSEL1CR_0_0),
@@ -926,10 +928,6 @@ static pinmux_enum_t pinmux_data[] = {
 	PINMUX_DATA(MFIv4_MARK,		MSEL4CR_6_1),
 };
 
-#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
-#define GPIO_PORT_ALL() _190(_GPIO_PORT, , unused)
-#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
-
 static struct pinmux_gpio pinmux_gpios[] = {
 
 	/* PORT */
@@ -1201,22 +1199,6 @@ static struct pinmux_gpio pinmux_gpios[] = {
 	GPIO_FN(SDENC_DV_CLKI),
 };
 
-/* helper for top 4 bits in PORTnCR */
-#define PCRH(in, in_pd, in_pu, out)		\
-	0, (out), (in), 0,			\
-	0, 0, 0, 0,				\
-	0, 0, (in_pd), 0,			\
-	0, 0, (in_pu), 0
-
-#define PORTCR(nr, reg)						\
-	{ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {		\
-		PCRH(PORT##nr##_IN, PORT##nr##_IN_PD,		\
-		     PORT##nr##_IN_PU, PORT##nr##_OUT),		\
-		PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2,	\
-		PORT##nr##_FN3,	PORT##nr##_FN4, PORT##nr##_FN5,	\
-		PORT##nr##_FN6, PORT##nr##_FN7 }		\
-	}
-
 static struct pinmux_cfg_reg pinmux_config_regs[] = {
 	PORTCR(0,	0xE6051000), /* PORT0CR */
 	PORTCR(1,	0xE6051001), /* PORT1CR */

arch/arm/mach-shmobile/pfc-sh7377.c

@@ -22,84 +22,65 @@
 #include <linux/gpio.h>
 #include <mach/sh7377.h>
 
-#define _1(fn, pfx, sfx) fn(pfx, sfx)
-
-#define _10(fn, pfx, sfx)				\
-	_1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx),	\
-	_1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx),	\
-	_1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx),	\
-	_1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx),	\
-	_1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
-
-#define _90(fn, pfx, sfx)				\
-	_10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx),	\
-	_10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx),	\
-	_10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx),	\
-	_10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx),	\
-	_10(fn, pfx##9, sfx)
-
-#define _265(fn, pfx, sfx)				\
-	_10(fn, pfx, sfx), _90(fn, pfx, sfx),		\
-	_10(fn, pfx##10, sfx),				\
-	_1(fn, pfx##110, sfx), _1(fn, pfx##111, sfx),	\
-	_1(fn, pfx##112, sfx), _1(fn, pfx##113, sfx),	\
-	_1(fn, pfx##114, sfx), _1(fn, pfx##115, sfx),	\
-	_1(fn, pfx##116, sfx), _1(fn, pfx##117, sfx),	\
-	_1(fn, pfx##118, sfx),				\
-	_1(fn, pfx##128, sfx), _1(fn, pfx##129, sfx),	\
-	_10(fn, pfx##13, sfx), _10(fn, pfx##14, sfx),	\
-	_10(fn, pfx##15, sfx),				\
-	_1(fn, pfx##160, sfx), _1(fn, pfx##161, sfx),	\
-	_1(fn, pfx##162, sfx), _1(fn, pfx##163, sfx),	\
-	_1(fn, pfx##164, sfx),				\
-	_1(fn, pfx##192, sfx), _1(fn, pfx##193, sfx),	\
-	_1(fn, pfx##194, sfx), _1(fn, pfx##195, sfx),	\
-	_1(fn, pfx##196, sfx), _1(fn, pfx##197, sfx),	\
-	_1(fn, pfx##198, sfx), _1(fn, pfx##199, sfx),	\
-	_10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx),	\
-	_10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx),	\
-	_10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx),	\
-	_1(fn, pfx##260, sfx), _1(fn, pfx##261, sfx),	\
-	_1(fn, pfx##262, sfx), _1(fn, pfx##263, sfx),	\
-	_1(fn, pfx##264, sfx)
-
-#define _PORT(pfx, sfx) pfx##_##sfx
-#define PORT_265(str) _265(_PORT, PORT, str)
+#define CPU_ALL_PORT(fn, pfx, sfx)				\
+	PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx),		\
+	PORT_10(fn, pfx##10, sfx),				\
+	PORT_1(fn, pfx##110, sfx), PORT_1(fn, pfx##111, sfx),	\
+	PORT_1(fn, pfx##112, sfx), PORT_1(fn, pfx##113, sfx),	\
+	PORT_1(fn, pfx##114, sfx), PORT_1(fn, pfx##115, sfx),	\
+	PORT_1(fn, pfx##116, sfx), PORT_1(fn, pfx##117, sfx),	\
+	PORT_1(fn, pfx##118, sfx),				\
+	PORT_1(fn, pfx##128, sfx), PORT_1(fn, pfx##129, sfx),	\
+	PORT_10(fn, pfx##13, sfx), PORT_10(fn, pfx##14, sfx),	\
+	PORT_10(fn, pfx##15, sfx),				\
+	PORT_1(fn, pfx##160, sfx), PORT_1(fn, pfx##161, sfx),	\
+	PORT_1(fn, pfx##162, sfx), PORT_1(fn, pfx##163, sfx),	\
+	PORT_1(fn, pfx##164, sfx),				\
+	PORT_1(fn, pfx##192, sfx), PORT_1(fn, pfx##193, sfx),	\
+	PORT_1(fn, pfx##194, sfx), PORT_1(fn, pfx##195, sfx),	\
+	PORT_1(fn, pfx##196, sfx), PORT_1(fn, pfx##197, sfx),	\
+	PORT_1(fn, pfx##198, sfx), PORT_1(fn, pfx##199, sfx),	\
+	PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx),	\
+	PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx),	\
+	PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx),	\
+	PORT_1(fn, pfx##260, sfx), PORT_1(fn, pfx##261, sfx),	\
+	PORT_1(fn, pfx##262, sfx), PORT_1(fn, pfx##263, sfx),	\
+	PORT_1(fn, pfx##264, sfx)
 
 enum {
 	PINMUX_RESERVED = 0,
 
 	PINMUX_DATA_BEGIN,
-	PORT_265(DATA), /* PORT0_DATA -> PORT264_DATA */
+	PORT_ALL(DATA), /* PORT0_DATA -> PORT264_DATA */
 	PINMUX_DATA_END,
 
 	PINMUX_INPUT_BEGIN,
-	PORT_265(IN), /* PORT0_IN -> PORT264_IN */
+	PORT_ALL(IN), /* PORT0_IN -> PORT264_IN */
 	PINMUX_INPUT_END,
 
 	PINMUX_INPUT_PULLUP_BEGIN,
-	PORT_265(IN_PU), /* PORT0_IN_PU -> PORT264_IN_PU */
+	PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT264_IN_PU */
 	PINMUX_INPUT_PULLUP_END,
 
 	PINMUX_INPUT_PULLDOWN_BEGIN,
-	PORT_265(IN_PD), /* PORT0_IN_PD -> PORT264_IN_PD */
+	PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT264_IN_PD */
 	PINMUX_INPUT_PULLDOWN_END,
 
 	PINMUX_OUTPUT_BEGIN,
-	PORT_265(OUT), /* PORT0_OUT -> PORT264_OUT */
+	PORT_ALL(OUT), /* PORT0_OUT -> PORT264_OUT */
 	PINMUX_OUTPUT_END,
 
 	PINMUX_FUNCTION_BEGIN,
-	PORT_265(FN_IN), /* PORT0_FN_IN -> PORT264_FN_IN */
-	PORT_265(FN_OUT), /* PORT0_FN_OUT -> PORT264_FN_OUT */
-	PORT_265(FN0), /* PORT0_FN0 -> PORT264_FN0 */
-	PORT_265(FN1), /* PORT0_FN1 -> PORT264_FN1 */
-	PORT_265(FN2), /* PORT0_FN2 -> PORT264_FN2 */
-	PORT_265(FN3), /* PORT0_FN3 -> PORT264_FN3 */
-	PORT_265(FN4), /* PORT0_FN4 -> PORT264_FN4 */
-	PORT_265(FN5), /* PORT0_FN5 -> PORT264_FN5 */
-	PORT_265(FN6), /* PORT0_FN6 -> PORT264_FN6 */
-	PORT_265(FN7), /* PORT0_FN7 -> PORT264_FN7 */
+	PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT264_FN_IN */
+	PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT264_FN_OUT */
+	PORT_ALL(FN0), /* PORT0_FN0 -> PORT264_FN0 */
+	PORT_ALL(FN1), /* PORT0_FN1 -> PORT264_FN1 */
+	PORT_ALL(FN2), /* PORT0_FN2 -> PORT264_FN2 */
+	PORT_ALL(FN3), /* PORT0_FN3 -> PORT264_FN3 */
+	PORT_ALL(FN4), /* PORT0_FN4 -> PORT264_FN4 */
+	PORT_ALL(FN5), /* PORT0_FN5 -> PORT264_FN5 */
+	PORT_ALL(FN6), /* PORT0_FN6 -> PORT264_FN6 */
+	PORT_ALL(FN7), /* PORT0_FN7 -> PORT264_FN7 */
 
 	MSELBCR_MSEL17_1, MSELBCR_MSEL17_0,
 	MSELBCR_MSEL16_1, MSELBCR_MSEL16_0,
@@ -360,45 +341,6 @@ enum {
 	PINMUX_MARK_END,
 };
 
-#define PORT_DATA_I(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
-
-#define PORT_DATA_I_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_IN, PORT##nr##_IN_PD)
-
-#define PORT_DATA_I_PU(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_IN, PORT##nr##_IN_PU)
-
-#define PORT_DATA_I_PU_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_IN, PORT##nr##_IN_PD,	\
-				PORT##nr##_IN_PU)
-
-#define PORT_DATA_O(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT)
-
-#define PORT_DATA_IO(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN)
-
-#define PORT_DATA_IO_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN,		\
-				PORT##nr##_IN_PD)
-
-#define PORT_DATA_IO_PU(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN,		\
-				PORT##nr##_IN_PU)
-
-#define PORT_DATA_IO_PU_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN,		\
-				PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
 static pinmux_enum_t pinmux_data[] = {
 	/* specify valid pin states for each pin in GPIO mode */
 	/* 55-1 (GPIO) */
@@ -1078,13 +1020,9 @@ static pinmux_enum_t pinmux_data[] = {
 	PINMUX_DATA(RESETOUTS_MARK, PORT264_FN1),
 };
 
-#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
-#define GPIO_PORT_265() _265(_GPIO_PORT, , unused)
-#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
-
 static struct pinmux_gpio pinmux_gpios[] = {
 	/* 55-1 -> 55-5 (GPIO) */
-	GPIO_PORT_265(),
+	GPIO_PORT_ALL(),
 
 	/* Special Pull-up / Pull-down Functions */
 	GPIO_FN(PORT66_KEYIN0_PU), GPIO_FN(PORT67_KEYIN1_PU),
@@ -1362,23 +1300,6 @@ static struct pinmux_gpio pinmux_gpios[] = {
 	GPIO_FN(RESETOUTS),
 };
 
-/* helper for top 4 bits in PORTnCR */
-#define PCRH(in, in_pd, in_pu, out)	\
-	0, (out), (in), 0,	\
-		0, 0, 0, 0,	\
-		0, 0, (in_pd), 0,	\
-		0, 0, (in_pu), 0
-
-#define PORTCR(nr, reg)	\
-	{ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {	\
-			PCRH(PORT##nr##_IN, PORT##nr##_IN_PD,	\
-				 PORT##nr##_IN_PU, PORT##nr##_OUT),	\
-				PORT##nr##_FN0, PORT##nr##_FN1,	\
-				PORT##nr##_FN2, PORT##nr##_FN3,	\
-				PORT##nr##_FN4, PORT##nr##_FN5,	\
-				PORT##nr##_FN6, PORT##nr##_FN7 }	\
-	}
-
 static struct pinmux_cfg_reg pinmux_config_regs[] = {
 	PORTCR(0, 0xe6050000), /* PORT0CR */
 	PORTCR(1, 0xe6050001), /* PORT1CR */

arch/arm/mach-shmobile/pfc-sh73a0.c

@@ -24,83 +24,71 @@
 #include <mach/sh73a0.h>
 #include <mach/irqs.h>
 
-#define _1(fn, pfx, sfx) fn(pfx, sfx)
-
-#define _10(fn, pfx, sfx)				\
-	_1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx),	\
-	_1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx),	\
-	_1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx),	\
-	_1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx),	\
-	_1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
-
-#define _310(fn, pfx, sfx)				\
-	_10(fn, pfx,    sfx), _10(fn, pfx##1, sfx),	\
-	_10(fn, pfx##2, sfx), _10(fn, pfx##3, sfx),	\
-	_10(fn, pfx##4, sfx), _10(fn, pfx##5, sfx),	\
-	_10(fn, pfx##6, sfx), _10(fn, pfx##7, sfx),	\
-	_10(fn, pfx##8, sfx), _10(fn, pfx##9, sfx),	\
-	_10(fn, pfx##10, sfx),				\
-	_1(fn, pfx##110, sfx), _1(fn, pfx##111, sfx),	\
-	_1(fn, pfx##112, sfx), _1(fn, pfx##113, sfx),	\
-	_1(fn, pfx##114, sfx), _1(fn, pfx##115, sfx),	\
-	_1(fn, pfx##116, sfx), _1(fn, pfx##117, sfx),	\
-	_1(fn, pfx##118, sfx),				\
-	_1(fn, pfx##128, sfx), _1(fn, pfx##129, sfx),	\
-	_10(fn, pfx##13, sfx), _10(fn, pfx##14, sfx),	\
-	_10(fn, pfx##15, sfx),				\
-	_1(fn, pfx##160, sfx), _1(fn, pfx##161, sfx),	\
-	_1(fn, pfx##162, sfx), _1(fn, pfx##163, sfx),	\
-	_1(fn, pfx##164, sfx),				\
-	_1(fn, pfx##192, sfx), _1(fn, pfx##193, sfx),	\
-	_1(fn, pfx##194, sfx), _1(fn, pfx##195, sfx),	\
-	_1(fn, pfx##196, sfx), _1(fn, pfx##197, sfx),	\
-	_1(fn, pfx##198, sfx), _1(fn, pfx##199, sfx),	\
-	_10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx),	\
-	_10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx),	\
-	_10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx),	\
-	_10(fn, pfx##26, sfx), _10(fn, pfx##27, sfx),	\
-	_1(fn, pfx##280, sfx), _1(fn, pfx##281, sfx),	\
-	_1(fn, pfx##282, sfx),				\
-	_1(fn, pfx##288, sfx), _1(fn, pfx##289, sfx),	\
-	_10(fn, pfx##29, sfx), _10(fn, pfx##30, sfx)
-
-#define _PORT(pfx, sfx) pfx##_##sfx
-#define PORT_310(str) _310(_PORT, PORT, str)
+#define CPU_ALL_PORT(fn, pfx, sfx)				\
+	PORT_10(fn, pfx,    sfx), PORT_10(fn, pfx##1, sfx),	\
+	PORT_10(fn, pfx##2, sfx), PORT_10(fn, pfx##3, sfx),	\
+	PORT_10(fn, pfx##4, sfx), PORT_10(fn, pfx##5, sfx),	\
+	PORT_10(fn, pfx##6, sfx), PORT_10(fn, pfx##7, sfx),	\
+	PORT_10(fn, pfx##8, sfx), PORT_10(fn, pfx##9, sfx),	\
+	PORT_10(fn, pfx##10, sfx),				\
+	PORT_1(fn, pfx##110, sfx), PORT_1(fn, pfx##111, sfx),	\
+	PORT_1(fn, pfx##112, sfx), PORT_1(fn, pfx##113, sfx),	\
+	PORT_1(fn, pfx##114, sfx), PORT_1(fn, pfx##115, sfx),	\
+	PORT_1(fn, pfx##116, sfx), PORT_1(fn, pfx##117, sfx),	\
+	PORT_1(fn, pfx##118, sfx),				\
+	PORT_1(fn, pfx##128, sfx), PORT_1(fn, pfx##129, sfx),	\
+	PORT_10(fn, pfx##13, sfx), PORT_10(fn, pfx##14, sfx),	\
+	PORT_10(fn, pfx##15, sfx),				\
+	PORT_1(fn, pfx##160, sfx), PORT_1(fn, pfx##161, sfx),	\
+	PORT_1(fn, pfx##162, sfx), PORT_1(fn, pfx##163, sfx),	\
+	PORT_1(fn, pfx##164, sfx),				\
+	PORT_1(fn, pfx##192, sfx), PORT_1(fn, pfx##193, sfx),	\
+	PORT_1(fn, pfx##194, sfx), PORT_1(fn, pfx##195, sfx),	\
+	PORT_1(fn, pfx##196, sfx), PORT_1(fn, pfx##197, sfx),	\
+	PORT_1(fn, pfx##198, sfx), PORT_1(fn, pfx##199, sfx),	\
+	PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx),	\
+	PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx),	\
+	PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx),	\
+	PORT_10(fn, pfx##26, sfx), PORT_10(fn, pfx##27, sfx),	\
+	PORT_1(fn, pfx##280, sfx), PORT_1(fn, pfx##281, sfx),	\
+	PORT_1(fn, pfx##282, sfx),				\
+	PORT_1(fn, pfx##288, sfx), PORT_1(fn, pfx##289, sfx),	\
+	PORT_10(fn, pfx##29, sfx), PORT_10(fn, pfx##30, sfx)
 
 enum {
 	PINMUX_RESERVED = 0,
 
 	PINMUX_DATA_BEGIN,
-	PORT_310(DATA),			/* PORT0_DATA -> PORT309_DATA */
+	PORT_ALL(DATA),			/* PORT0_DATA -> PORT309_DATA */
 	PINMUX_DATA_END,
 
 	PINMUX_INPUT_BEGIN,
-	PORT_310(IN),			/* PORT0_IN -> PORT309_IN */
+	PORT_ALL(IN),			/* PORT0_IN -> PORT309_IN */
 	PINMUX_INPUT_END,
 
 	PINMUX_INPUT_PULLUP_BEGIN,
-	PORT_310(IN_PU),		/* PORT0_IN_PU -> PORT309_IN_PU */
+	PORT_ALL(IN_PU),		/* PORT0_IN_PU -> PORT309_IN_PU */
 	PINMUX_INPUT_PULLUP_END,
 
 	PINMUX_INPUT_PULLDOWN_BEGIN,
-	PORT_310(IN_PD),		/* PORT0_IN_PD -> PORT309_IN_PD */
+	PORT_ALL(IN_PD),		/* PORT0_IN_PD -> PORT309_IN_PD */
 	PINMUX_INPUT_PULLDOWN_END,
 
 	PINMUX_OUTPUT_BEGIN,
-	PORT_310(OUT),			/* PORT0_OUT -> PORT309_OUT */
+	PORT_ALL(OUT),			/* PORT0_OUT -> PORT309_OUT */
 	PINMUX_OUTPUT_END,
 
 	PINMUX_FUNCTION_BEGIN,
-	PORT_310(FN_IN),		/* PORT0_FN_IN -> PORT309_FN_IN */
-	PORT_310(FN_OUT),		/* PORT0_FN_OUT -> PORT309_FN_OUT */
-	PORT_310(FN0),			/* PORT0_FN0 -> PORT309_FN0 */
-	PORT_310(FN1),			/* PORT0_FN1 -> PORT309_FN1 */
-	PORT_310(FN2),			/* PORT0_FN2 -> PORT309_FN2 */
-	PORT_310(FN3),			/* PORT0_FN3 -> PORT309_FN3 */
-	PORT_310(FN4),			/* PORT0_FN4 -> PORT309_FN4 */
-	PORT_310(FN5),			/* PORT0_FN5 -> PORT309_FN5 */
-	PORT_310(FN6),			/* PORT0_FN6 -> PORT309_FN6 */
-	PORT_310(FN7),			/* PORT0_FN7 -> PORT309_FN7 */
+	PORT_ALL(FN_IN),		/* PORT0_FN_IN -> PORT309_FN_IN */
+	PORT_ALL(FN_OUT),		/* PORT0_FN_OUT -> PORT309_FN_OUT */
+	PORT_ALL(FN0),			/* PORT0_FN0 -> PORT309_FN0 */
+	PORT_ALL(FN1),			/* PORT0_FN1 -> PORT309_FN1 */
+	PORT_ALL(FN2),			/* PORT0_FN2 -> PORT309_FN2 */
+	PORT_ALL(FN3),			/* PORT0_FN3 -> PORT309_FN3 */
+	PORT_ALL(FN4),			/* PORT0_FN4 -> PORT309_FN4 */
+	PORT_ALL(FN5),			/* PORT0_FN5 -> PORT309_FN5 */
+	PORT_ALL(FN6),			/* PORT0_FN6 -> PORT309_FN6 */
+	PORT_ALL(FN7),			/* PORT0_FN7 -> PORT309_FN7 */
 
 	MSEL2CR_MSEL19_0, MSEL2CR_MSEL19_1,
 	MSEL2CR_MSEL18_0, MSEL2CR_MSEL18_1,
@@ -508,6 +496,14 @@ enum {
 	SDHICMD2_PU_MARK,
 	MMCCMD0_PU_MARK,
 	MMCCMD1_PU_MARK,
+	MMCD0_0_PU_MARK,
+	MMCD0_1_PU_MARK,
+	MMCD0_2_PU_MARK,
+	MMCD0_3_PU_MARK,
+	MMCD0_4_PU_MARK,
+	MMCD0_5_PU_MARK,
+	MMCD0_6_PU_MARK,
+	MMCD0_7_PU_MARK,
 	FSIBISLD_PU_MARK,
 	FSIACK_PU_MARK,
 	FSIAILR_PU_MARK,
@@ -517,45 +513,6 @@ enum {
 	PINMUX_MARK_END,
 };
 
-#define PORT_DATA_I(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
-
-#define PORT_DATA_I_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_IN, PORT##nr##_IN_PD)
-
-#define PORT_DATA_I_PU(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_IN, PORT##nr##_IN_PU)
-
-#define PORT_DATA_I_PU_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_IN, PORT##nr##_IN_PD,	\
-				PORT##nr##_IN_PU)
-
-#define PORT_DATA_O(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT)
-
-#define PORT_DATA_IO(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN)
-
-#define PORT_DATA_IO_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN,		\
-				PORT##nr##_IN_PD)
-
-#define PORT_DATA_IO_PU(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN,		\
-				PORT##nr##_IN_PU)
-
-#define PORT_DATA_IO_PU_PD(nr)	\
-	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
-				PORT##nr##_OUT, PORT##nr##_IN,		\
-				PORT##nr##_IN_PD, PORT##nr##_IN_PU)
-
 static pinmux_enum_t pinmux_data[] = {
 	/* specify valid pin states for each pin in GPIO mode */
 
@@ -1561,6 +1518,24 @@ static pinmux_enum_t pinmux_data[] = {
 		MSEL4CR_MSEL15_0),
 	PINMUX_DATA(MMCCMD1_PU_MARK, PORT297_FN2, PORT297_IN_PU,
 		MSEL4CR_MSEL15_1),
+
+	PINMUX_DATA(MMCD0_0_PU_MARK,
+		    PORT271_FN1, PORT271_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_1_PU_MARK,
+		    PORT272_FN1, PORT272_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_2_PU_MARK,
+		    PORT273_FN1, PORT273_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_3_PU_MARK,
+		    PORT274_FN1, PORT274_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_4_PU_MARK,
+		    PORT275_FN1, PORT275_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_5_PU_MARK,
+		    PORT276_FN1, PORT276_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_6_PU_MARK,
+		    PORT277_FN1, PORT277_IN_PU, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_7_PU_MARK,
+		    PORT278_FN1, PORT278_IN_PU, MSEL4CR_MSEL15_0),
+
 	PINMUX_DATA(FSIBISLD_PU_MARK, PORT39_FN1, PORT39_IN_PU),
 	PINMUX_DATA(FSIACK_PU_MARK, PORT49_FN1, PORT49_IN_PU),
 	PINMUX_DATA(FSIAILR_PU_MARK, PORT50_FN5, PORT50_IN_PU),
@@ -1568,12 +1543,8 @@ static pinmux_enum_t pinmux_data[] = {
 	PINMUX_DATA(FSIAISLD_PU_MARK, PORT55_FN1, PORT55_IN_PU),
 };
 
-#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
-#define GPIO_PORT_310() _310(_GPIO_PORT, , unused)
-#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
-
 static struct pinmux_gpio pinmux_gpios[] = {
-	GPIO_PORT_310(),
+	GPIO_PORT_ALL(),
 
 	/* Table 25-1 (Functions 0-7) */
 	GPIO_FN(VBUS_0),
@@ -2236,24 +2207,20 @@ static struct pinmux_gpio pinmux_gpios[] = {
 	GPIO_FN(SDHICMD2_PU),
 	GPIO_FN(MMCCMD0_PU),
 	GPIO_FN(MMCCMD1_PU),
+	GPIO_FN(MMCD0_0_PU),
+	GPIO_FN(MMCD0_1_PU),
+	GPIO_FN(MMCD0_2_PU),
+	GPIO_FN(MMCD0_3_PU),
+	GPIO_FN(MMCD0_4_PU),
+	GPIO_FN(MMCD0_5_PU),
+	GPIO_FN(MMCD0_6_PU),
+	GPIO_FN(MMCD0_7_PU),
 	GPIO_FN(FSIACK_PU),
 	GPIO_FN(FSIAILR_PU),
 	GPIO_FN(FSIAIBT_PU),
 	GPIO_FN(FSIAISLD_PU),
 };
 
-#define PORTCR(nr, reg)	\
-	{ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
-		0, \
-		/*0001*/ PORT##nr##_OUT , \
-		/*0010*/ PORT##nr##_IN , 0, 0, 0, 0, 0, 0, 0, \
-		/*1010*/ PORT##nr##_IN_PD, 0, 0, 0, \
-		/*1110*/ PORT##nr##_IN_PU, 0, \
-		PORT##nr##_FN0, PORT##nr##_FN1,	PORT##nr##_FN2, \
-		PORT##nr##_FN3,	PORT##nr##_FN4, PORT##nr##_FN5, \
-		PORT##nr##_FN6, PORT##nr##_FN7, 0, 0, 0, 0, 0, 0, 0, 0 } \
-	}
-
 static struct pinmux_cfg_reg pinmux_config_regs[] = {
 	PORTCR(0, 0xe6050000), /* PORT0CR */
 	PORTCR(1, 0xe6050001), /* PORT1CR */

arch/arm/mach-shmobile/pm-sh7372.c

@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/irq.h>
 #include <linux/bitrev.h>
+#include <linux/console.h>
 #include <asm/system.h>
 #include <asm/io.h>
 #include <asm/tlbflush.h>
@@ -106,9 +107,8 @@ static int pd_power_down(struct generic_pm_domain *genpd)
 	return 0;
 }
 
-static int pd_power_up(struct generic_pm_domain *genpd)
+static int __pd_power_up(struct sh7372_pm_domain *sh7372_pd, bool do_resume)
 {
-	struct sh7372_pm_domain *sh7372_pd = to_sh7372_pd(genpd);
 	unsigned int mask = 1 << sh7372_pd->bit_shift;
 	unsigned int retry_count;
 	int ret = 0;
@@ -123,13 +123,13 @@ static int pd_power_up(struct generic_pm_domain *genpd)
 
 	for (retry_count = 2 * PSTR_RETRIES; retry_count; retry_count--) {
 		if (!(__raw_readl(SWUCR) & mask))
-			goto out;
+			break;
 		if (retry_count > PSTR_RETRIES)
 			udelay(PSTR_DELAY_US);
 		else
 			cpu_relax();
 	}
-	if (__raw_readl(SWUCR) & mask)
+	if (!retry_count)
 		ret = -EIO;
 
 	if (!sh7372_pd->no_debug)
@@ -137,12 +137,17 @@ static int pd_power_up(struct generic_pm_domain *genpd)
 			 mask, __raw_readl(PSTR));
 
  out:
-	if (ret == 0 && sh7372_pd->resume)
+	if (ret == 0 && sh7372_pd->resume && do_resume)
 		sh7372_pd->resume();
 
 	return ret;
 }
 
+static int pd_power_up(struct generic_pm_domain *genpd)
+{
+	 return __pd_power_up(to_sh7372_pd(genpd), true);
+}
+
 static void sh7372_a4r_suspend(void)
 {
 	sh7372_intcs_suspend();
@@ -174,7 +179,7 @@ void sh7372_init_pm_domain(struct sh7372_pm_domain *sh7372_pd)
 	genpd->active_wakeup = pd_active_wakeup;
 	genpd->power_off = pd_power_down;
 	genpd->power_on = pd_power_up;
-	genpd->power_on(&sh7372_pd->genpd);
+	__pd_power_up(sh7372_pd, false);
 }
 
 void sh7372_add_device_to_domain(struct sh7372_pm_domain *sh7372_pd,
@@ -227,11 +232,23 @@ struct sh7372_pm_domain sh7372_a3sp = {
 	.no_debug = true,
 };
 
+static void sh7372_a3sp_init(void)
+{
+	/* serial consoles make use of SCIF hardware located in A3SP,
+	 * keep such power domain on if "no_console_suspend" is set.
+	 */
+	sh7372_a3sp.stay_on = !console_suspend_enabled;
+}
+
 struct sh7372_pm_domain sh7372_a3sg = {
 	.bit_shift = 13,
 };
 
-#endif /* CONFIG_PM */
+#else /* !CONFIG_PM */
+
+static inline void sh7372_a3sp_init(void) {}
+
+#endif /* !CONFIG_PM */
 
 #if defined(CONFIG_SUSPEND) || defined(CONFIG_CPU_IDLE)
 static int sh7372_do_idle_core_standby(unsigned long unused)
@@ -402,22 +419,18 @@ static void sh7372_setup_a3sm(unsigned long msk, unsigned long msk2)
 
 #ifdef CONFIG_CPU_IDLE
 
-static void sh7372_cpuidle_setup(struct cpuidle_device *dev)
+static void sh7372_cpuidle_setup(struct cpuidle_driver *drv)
 {
-	struct cpuidle_state *state;
-	int i = dev->state_count;
+	struct cpuidle_state *state = &drv->states[drv->state_count];
 
-	state = &dev->states[i];
 	snprintf(state->name, CPUIDLE_NAME_LEN, "C2");
 	strncpy(state->desc, "Core Standby Mode", CPUIDLE_DESC_LEN);
 	state->exit_latency = 10;
 	state->target_residency = 20 + 10;
-	state->power_usage = 1; /* perhaps not */
-	state->flags = 0;
-	state->flags |= CPUIDLE_FLAG_TIME_VALID;
-	shmobile_cpuidle_modes[i] = sh7372_enter_core_standby;
+	state->flags = CPUIDLE_FLAG_TIME_VALID;
+	shmobile_cpuidle_modes[drv->state_count] = sh7372_enter_core_standby;
 
-	dev->state_count = i + 1;
+	drv->state_count++;
 }
 
 static void sh7372_cpuidle_init(void)
@@ -469,6 +482,8 @@ void __init sh7372_pm_init(void)
 	/* do not convert A3SM, A3SP, A3SG, A4R power down into A4S */
 	__raw_writel(0, PDNSEL);
 
+	sh7372_a3sp_init();
+
 	sh7372_suspend_init();
 	sh7372_cpuidle_init();
 }

arch/arm/mach-tegra/board-dt.c

@@ -101,6 +101,13 @@ static void __init tegra_dt_init(void)
 
 	tegra_clk_init_from_table(tegra_dt_clk_init_table);
 
+	/*
+	 * Finished with the static registrations now; fill in the missing
+	 * devices
+	 */
+	of_platform_populate(NULL, tegra_dt_match_table,
+				tegra20_auxdata_lookup, NULL);
+
 	for (i = 0; i < ARRAY_SIZE(pinmux_configs); i++) {
 		if (of_machine_is_compatible(pinmux_configs[i].machine)) {
 			pinmux_configs[i].init();
@@ -110,12 +117,6 @@ static void __init tegra_dt_init(void)
 
 	WARN(i == ARRAY_SIZE(pinmux_configs),
 		"Unknown platform! Pinmuxing not initialized\n");
-
-	/*
-	 * Finished with the static registrations now; fill in the missing
-	 * devices
-	 */
-	of_platform_populate(NULL, tegra_dt_match_table, tegra20_auxdata_lookup, NULL);
 }
 
 static const char * tegra_dt_board_compat[] = {

arch/arm/mach-tegra/board-harmony-pinmux.c

@@ -16,6 +16,8 @@
 
 #include <linux/kernel.h>
 #include <linux/gpio.h>
+#include <linux/of.h>
+
 #include <mach/pinmux.h>
 
 #include "gpio-names.h"
@@ -161,7 +163,9 @@ static struct tegra_gpio_table gpio_table[] = {
 
 void harmony_pinmux_init(void)
 {
-	platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+	if (!of_machine_is_compatible("nvidia,tegra20"))
+		platform_add_devices(pinmux_devices,
+					ARRAY_SIZE(pinmux_devices));
 
 	tegra_pinmux_config_table(harmony_pinmux, ARRAY_SIZE(harmony_pinmux));
 

arch/arm/mach-tegra/board-paz00-pinmux.c

@@ -16,6 +16,8 @@
 
 #include <linux/kernel.h>
 #include <linux/gpio.h>
+#include <linux/of.h>
+
 #include <mach/pinmux.h>
 
 #include "gpio-names.h"
@@ -158,7 +160,9 @@ static struct tegra_gpio_table gpio_table[] = {
 
 void paz00_pinmux_init(void)
 {
-	platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+	if (!of_machine_is_compatible("nvidia,tegra20"))
+		platform_add_devices(pinmux_devices,
+					ARRAY_SIZE(pinmux_devices));
 
 	tegra_pinmux_config_table(paz00_pinmux, ARRAY_SIZE(paz00_pinmux));
 

arch/arm/mach-tegra/board-seaboard-pinmux.c

@@ -16,6 +16,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
+#include <linux/of.h>
 
 #include <mach/pinmux.h>
 #include <mach/pinmux-t2.h>
@@ -191,6 +192,7 @@ static struct tegra_gpio_table common_gpio_table[] = {
 	{ .gpio = TEGRA_GPIO_SD2_POWER,		.enable = true },
 	{ .gpio = TEGRA_GPIO_LIDSWITCH,		.enable = true },
 	{ .gpio = TEGRA_GPIO_POWERKEY,		.enable = true },
+	{ .gpio = TEGRA_GPIO_HP_DET,		.enable = true },
 	{ .gpio = TEGRA_GPIO_ISL29018_IRQ,	.enable = true },
 	{ .gpio = TEGRA_GPIO_CDC_IRQ,		.enable = true },
 	{ .gpio = TEGRA_GPIO_USB1,		.enable = true },
@@ -218,7 +220,9 @@ static void __init update_pinmux(struct tegra_pingroup_config *newtbl, int size)
 
 void __init seaboard_common_pinmux_init(void)
 {
-	platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+	if (!of_machine_is_compatible("nvidia,tegra20"))
+		platform_add_devices(pinmux_devices,
+					ARRAY_SIZE(pinmux_devices));
 
 	tegra_pinmux_config_table(seaboard_pinmux, ARRAY_SIZE(seaboard_pinmux));
 

arch/arm/mach-tegra/board-trimslice-pinmux.c

@@ -16,6 +16,7 @@
 #include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/of.h>
 
 #include <mach/pinmux.h>
 
@@ -157,7 +158,9 @@ static struct tegra_gpio_table gpio_table[] = {
 
 void __init trimslice_pinmux_init(void)
 {
-	platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
+	if (!of_machine_is_compatible("nvidia,tegra20"))
+		platform_add_devices(pinmux_devices,
+					ARRAY_SIZE(pinmux_devices));
 	tegra_pinmux_config_table(trimslice_pinmux, ARRAY_SIZE(trimslice_pinmux));
 	tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
 }

arch/arm/mach-w90x900/dev.c

@@ -422,7 +422,7 @@ struct platform_device nuc900_device_kpi = {
 
 /* LCD controller*/
 
-static struct nuc900fb_display __initdata nuc900_lcd_info[] = {
+static struct nuc900fb_display nuc900_lcd_info[] = {
 	/* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */
 	[0] = {
 		.type		= LCM_DCCS_VA_SRC_RGB565,
@@ -445,7 +445,7 @@ static struct nuc900fb_display __initdata nuc900_lcd_info[] = {
 	},
 };
 
-static struct nuc900fb_mach_info nuc900_fb_info __initdata = {
+static struct nuc900fb_mach_info nuc900_fb_info = {
 #if defined(CONFIG_GPM1040A0_320X240)
 	.displays		= &nuc900_lcd_info[0],
 #else

arch/arm/mach-w90x900/include/mach/mfp.h

@@ -19,6 +19,7 @@
 extern void mfp_set_groupf(struct device *dev);
 extern void mfp_set_groupc(struct device *dev);
 extern void mfp_set_groupi(struct device *dev);
-extern void mfp_set_groupg(struct device *dev);
+extern void mfp_set_groupg(struct device *dev, const char *subname);
+extern void mfp_set_groupd(struct device *dev, const char *subname);
 
 #endif /* __ASM_ARCH_MFP_H */

arch/arm/mach-w90x900/include/mach/nuc900_spi.h

@@ -14,7 +14,7 @@
 #ifndef __ASM_ARCH_SPI_H
 #define __ASM_ARCH_SPI_H
 
-extern void mfp_set_groupg(struct device *dev);
+extern void mfp_set_groupg(struct device *dev, const char *subname);
 
 struct nuc900_spi_info {
 	unsigned int num_cs;

arch/arm/mach-w90x900/mfp.c

@@ -26,10 +26,8 @@
 #define REG_MFSEL	(W90X900_VA_GCR + 0xC)
 
 #define GPSELF		(0x01 << 1)
-
 #define GPSELC		(0x03 << 2)
-#define ENKPI		(0x02 << 2)
-#define ENNAND		(0x01 << 2)
+#define GPSELD		(0x0f << 4)
 
 #define GPSELEI0	(0x01 << 26)
 #define GPSELEI1	(0x01 << 27)
@@ -37,11 +35,16 @@
 #define GPIOG0TO1	(0x03 << 14)
 #define GPIOG2TO3	(0x03 << 16)
 #define GPIOG22TO23	(0x03 << 22)
+#define GPIOG18TO20	(0x07 << 18)
 
 #define ENSPI		(0x0a << 14)
 #define ENI2C0		(0x01 << 14)
 #define ENI2C1		(0x01 << 16)
 #define ENAC97		(0x02 << 22)
+#define ENSD1		(0x02 << 18)
+#define ENSD0		(0x0a << 4)
+#define ENKPI		(0x02 << 2)
+#define ENNAND		(0x01 << 2)
 
 static DEFINE_MUTEX(mfp_mutex);
 
@@ -127,16 +130,19 @@ void mfp_set_groupi(struct device *dev)
 }
 EXPORT_SYMBOL(mfp_set_groupi);
 
-void mfp_set_groupg(struct device *dev)
+void mfp_set_groupg(struct device *dev, const char *subname)
 {
 	unsigned long mfpen;
 	const char *dev_id;
 
-	BUG_ON(!dev);
+	BUG_ON((!dev) && (!subname));
 
 	mutex_lock(&mfp_mutex);
 
-	dev_id = dev_name(dev);
+	if (subname != NULL)
+		dev_id = subname;
+	else
+		dev_id = dev_name(dev);
 
 	mfpen = __raw_readl(REG_MFSEL);
 
@@ -152,6 +158,9 @@ void mfp_set_groupg(struct device *dev)
 	} else if (strcmp(dev_id, "nuc900-audio") == 0) {
 		mfpen &= ~(GPIOG22TO23);
 		mfpen |= ENAC97;/*enable AC97*/
+	} else if (strcmp(dev_id, "nuc900-mmc-port1") == 0) {
+		mfpen &= ~(GPIOG18TO20);
+		mfpen |= (ENSD1 | 0x01);/*enable sd1*/
 	} else {
 		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);/*GPIOG[3:0]*/
 	}
@@ -162,3 +171,30 @@ void mfp_set_groupg(struct device *dev)
 }
 EXPORT_SYMBOL(mfp_set_groupg);
 
+void mfp_set_groupd(struct device *dev, const char *subname)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON((!dev) && (!subname));
+
+	mutex_lock(&mfp_mutex);
+
+	if (subname != NULL)
+		dev_id = subname;
+	else
+		dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "nuc900-mmc-port0") == 0) {
+		mfpen &= ~GPSELD;/*enable sd0*/
+		mfpen |= ENSD0;
+	} else
+		mfpen &= (~GPSELD);
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupd);

arch/arm/plat-mxc/Kconfig

@@ -10,7 +10,7 @@ choice
 
 config ARCH_IMX_V4_V5
 	bool "i.MX1, i.MX21, i.MX25, i.MX27"
-	select AUTO_ZRELADDR
+	select AUTO_ZRELADDR if !ZBOOT_ROM
 	select ARM_PATCH_PHYS_VIRT
 	help
 	  This enables support for systems based on the Freescale i.MX ARMv4
@@ -26,7 +26,7 @@ config ARCH_IMX_V6_V7
 
 config ARCH_MX5
 	bool "i.MX50, i.MX51, i.MX53"
-	select AUTO_ZRELADDR
+	select AUTO_ZRELADDR if !ZBOOT_ROM
 	select ARM_PATCH_PHYS_VIRT
 	help
 	  This enables support for machines using Freescale's i.MX50 and i.MX53

arch/arm/plat-mxc/avic.c

@@ -22,6 +22,7 @@
 #include <linux/io.h>
 #include <mach/common.h>
 #include <asm/mach/irq.h>
+#include <asm/exception.h>
 #include <mach/hardware.h>
 
 #include "irq-common.h"

arch/arm/plat-mxc/gic.c

@@ -28,21 +28,14 @@ asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
 		if (irqnr == 1023)
 			break;
 
-		if (irqnr > 29 && irqnr < 1021)
+		if (irqnr > 15 && irqnr < 1021)
 			handle_IRQ(irqnr, regs);
 #ifdef CONFIG_SMP
-		else if (irqnr < 16) {
+		else {
 			writel_relaxed(irqstat, gic_cpu_base_addr +
 						GIC_CPU_EOI);
 			handle_IPI(irqnr, regs);
 		}
-#endif
-#ifdef CONFIG_LOCAL_TIMERS
-		else if (irqnr == 29) {
-			writel_relaxed(irqstat, gic_cpu_base_addr +
-						GIC_CPU_EOI);
-			handle_local_timer(regs);
-		}
 #endif
 	} while (1);
 }

arch/arm/plat-mxc/include/mach/entry-macro.S

@@ -25,6 +25,3 @@
 
 	.macro test_for_ipi, irqnr, irqstat, base, tmp
 	.endm
-
-	.macro test_for_ltirq, irqnr, irqstat, base, tmp
-	.endm

arch/arm/plat-mxc/tzic.c

@@ -17,6 +17,7 @@
 #include <linux/io.h>
 
 #include <asm/mach/irq.h>
+#include <asm/exception.h>
 
 #include <mach/hardware.h>
 #include <mach/common.h>

arch/blackfin/include/asm/bfin_serial.h

@@ -32,6 +32,8 @@ struct work_struct;
 struct bfin_serial_port {
 	struct uart_port port;
 	unsigned int old_status;
+	int tx_irq;
+	int rx_irq;
 	int status_irq;
 #ifndef BFIN_UART_BF54X_STYLE
 	unsigned int lsr;

arch/blackfin/mach-bf518/boards/ezbrd.c

@@ -372,9 +372,14 @@ static struct resource bfin_uart0_resources[] = {
 		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -415,9 +420,14 @@ static struct resource bfin_uart1_resources[] = {
 		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{

arch/blackfin/mach-bf518/boards/tcm-bf518.c

@@ -308,9 +308,14 @@ static struct resource bfin_uart0_resources[] = {
 		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -351,9 +356,14 @@ static struct resource bfin_uart1_resources[] = {
 		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{

arch/blackfin/mach-bf527/boards/ad7160eval.c

@@ -380,9 +380,14 @@ static struct resource bfin_uart0_resources[] = {
 		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -423,9 +428,14 @@ static struct resource bfin_uart1_resources[] = {
 		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{

arch/blackfin/mach-bf527/boards/cm_bf527.c

@@ -8,6 +8,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -538,9 +539,14 @@ static struct resource bfin_uart0_resources[] = {
 		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -581,9 +587,14 @@ static struct resource bfin_uart1_resources[] = {
 		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -801,7 +812,6 @@ static struct platform_device bfin_sport1_uart_device = {
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
-#include <linux/export.h>
 
 static struct gpio_keys_button bfin_gpio_keys_table[] = {
 	{BTN_0, GPIO_PF14, 1, "gpio-keys: BTN0"},

arch/blackfin/mach-bf527/boards/ezbrd.c

@@ -7,6 +7,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -416,9 +417,14 @@ static struct resource bfin_uart0_resources[] = {
 		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -459,9 +465,14 @@ static struct resource bfin_uart1_resources[] = {
 		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -674,7 +685,6 @@ static struct platform_device bfin_sport1_uart_device = {
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
-#include <linux/export.h>
 
 static struct gpio_keys_button bfin_gpio_keys_table[] = {
 	{BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},

arch/blackfin/mach-bf527/boards/ezkit.c

@@ -710,9 +710,14 @@ static struct resource bfin_uart0_resources[] = {
 		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -753,9 +758,14 @@ static struct resource bfin_uart1_resources[] = {
 		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{

arch/blackfin/mach-bf527/boards/tll6527m.c

@@ -495,9 +495,14 @@ static struct resource bfin_uart0_resources[] = {
 		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -539,9 +544,14 @@ static struct resource bfin_uart1_resources[] = {
 		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{

arch/blackfin/mach-bf533/boards/H8606.c

@@ -237,9 +237,14 @@ static struct resource bfin_uart0_resources[] = {
 		.end = BFIN_UART_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX + 1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{

arch/blackfin/mach-bf533/boards/blackstamp.c

@@ -192,9 +192,14 @@ static struct resource bfin_uart0_resources[] = {
 		.end = BFIN_UART_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX + 1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{

arch/blackfin/mach-bf533/boards/cm_bf533.c

@@ -220,9 +220,14 @@ static struct resource bfin_uart0_resources[] = {
 		.end = BFIN_UART_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX + 1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{

arch/blackfin/mach-bf533/boards/ezkit.c

@@ -291,9 +291,14 @@ static struct resource bfin_uart0_resources[] = {
 		.end = BFIN_UART_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX + 1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{

arch/blackfin/mach-bf533/boards/ip0x.c

@@ -150,9 +150,14 @@ static struct resource bfin_uart0_resources[] = {
 		.end = BFIN_UART_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX + 1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{

arch/blackfin/mach-bf533/boards/stamp.c

@@ -297,9 +297,14 @@ static struct resource bfin_uart0_resources[] = {
 		.end = BFIN_UART_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX + 1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{

arch/blackfin/mach-bf537/boards/cm_bf537e.c

@@ -8,6 +8,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/export.h>
 #include <linux/etherdevice.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
@@ -304,9 +305,14 @@ static struct resource bfin_uart0_resources[] = {
 		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -365,9 +371,14 @@ static struct resource bfin_uart1_resources[] = {
 		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -569,7 +580,6 @@ static struct platform_device bfin_sport1_uart_device = {
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 #include <linux/bfin_mac.h>
-#include <linux/export.h>
 static const unsigned short bfin_mac_peripherals[] = P_MII0;
 
 static struct bfin_phydev_platform_data bfin_phydev_data[] = {

arch/blackfin/mach-bf537/boards/cm_bf537u.c

@@ -9,6 +9,7 @@
 
 #include <linux/device.h>
 #include <linux/etherdevice.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -305,9 +306,14 @@ static struct resource bfin_uart0_resources[] = {
 		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -348,9 +354,14 @@ static struct resource bfin_uart1_resources[] = {
 		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -534,7 +545,6 @@ static struct platform_device bfin_sport1_uart_device = {
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 #include <linux/bfin_mac.h>
-#include <linux/export.h>
 static const unsigned short bfin_mac_peripherals[] = P_MII0;
 
 static struct bfin_phydev_platform_data bfin_phydev_data[] = {

arch/blackfin/mach-bf537/boards/dnp5370.c

@@ -12,6 +12,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
@@ -49,7 +50,6 @@ static struct platform_device rtc_device = {
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 #include <linux/bfin_mac.h>
-#include <linux/export.h>
 static const unsigned short bfin_mac_peripherals[] = P_RMII0;
 
 static struct bfin_phydev_platform_data bfin_phydev_data[] = {
@@ -236,9 +236,14 @@ static struct resource bfin_uart0_resources[] = {
 		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -280,9 +285,14 @@ static struct resource bfin_uart1_resources[] = {
 		.end   = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_TX,
+		.end   = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART1_RX,
-		.end   = IRQ_UART1_RX+1,
+		.end   = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{

arch/blackfin/mach-bf537/boards/minotaur.c

@@ -239,9 +239,14 @@ static struct resource bfin_uart0_resources[] = {
 		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -282,9 +287,14 @@ static struct resource bfin_uart1_resources[] = {
 		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{

arch/blackfin/mach-bf537/boards/pnav10.c

@@ -8,6 +8,7 @@
 
 #include <linux/device.h>
 #include <linux/etherdevice.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -308,9 +309,14 @@ static struct resource bfin_uart0_resources[] = {
 		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -351,9 +357,14 @@ static struct resource bfin_uart1_resources[] = {
 		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{

arch/blackfin/mach-bf537/boards/stamp.c

@@ -7,6 +7,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
@@ -1565,9 +1566,14 @@ static struct resource bfin_uart0_resources[] = {
 		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -1620,9 +1626,14 @@ static struct resource bfin_uart1_resources[] = {
 		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -1992,7 +2003,6 @@ static struct adp8870_backlight_platform_data adp8870_pdata = {
 
 #if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
 #include <linux/i2c/adp8860.h>
-#include <linux/export.h>
 static struct led_info adp8860_leds[] = {
 	{
 		.name = "adp8860-led7",

arch/blackfin/mach-bf537/boards/tcm_bf537.c

@@ -9,6 +9,7 @@
 
 #include <linux/device.h>
 #include <linux/etherdevice.h>
+#include <linux/export.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -305,9 +306,14 @@ static struct resource bfin_uart0_resources[] = {
 		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -348,9 +354,14 @@ static struct resource bfin_uart1_resources[] = {
 		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -536,7 +547,6 @@ static struct platform_device bfin_sport1_uart_device = {
 
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 #include <linux/bfin_mac.h>
-#include <linux/export.h>
 static const unsigned short bfin_mac_peripherals[] = P_MII0;
 
 static struct bfin_phydev_platform_data bfin_phydev_data[] = {

arch/blackfin/mach-bf538/boards/ezkit.c

@@ -48,9 +48,14 @@ static struct resource bfin_uart0_resources[] = {
 		.end = UART0_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -103,9 +108,14 @@ static struct resource bfin_uart1_resources[] = {
 		.end = UART1_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -146,9 +156,14 @@ static struct resource bfin_uart2_resources[] = {
 		.end = UART2_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART2_TX,
+		.end = IRQ_UART2_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART2_RX,
-		.end = IRQ_UART2_RX+1,
+		.end = IRQ_UART2_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{

arch/blackfin/mach-bf548/boards/cm_bf548.c

@@ -134,9 +134,14 @@ static struct resource bfin_uart0_resources[] = {
 		.end = UART0_RBR+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -177,9 +182,14 @@ static struct resource bfin_uart1_resources[] = {
 		.end = UART1_RBR+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -236,9 +246,14 @@ static struct resource bfin_uart2_resources[] = {
 		.end = UART2_RBR+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART2_TX,
+		.end = IRQ_UART2_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART2_RX,
-		.end = IRQ_UART2_RX+1,
+		.end = IRQ_UART2_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -279,9 +294,14 @@ static struct resource bfin_uart3_resources[] = {
 		.end = UART3_RBR+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART3_TX,
+		.end = IRQ_UART3_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART3_RX,
-		.end = IRQ_UART3_RX+1,
+		.end = IRQ_UART3_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{

arch/blackfin/mach-bf548/boards/ezkit.c

@@ -240,9 +240,14 @@ static struct resource bfin_uart0_resources[] = {
 		.end = UART0_RBR+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART0_TX,
+		.end = IRQ_UART0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
+		.end = IRQ_UART0_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -283,9 +288,14 @@ static struct resource bfin_uart1_resources[] = {
 		.end = UART1_RBR+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART1_TX,
+		.end = IRQ_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
+		.end = IRQ_UART1_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -342,9 +352,14 @@ static struct resource bfin_uart2_resources[] = {
 		.end = UART2_RBR+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART2_TX,
+		.end = IRQ_UART2_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART2_RX,
-		.end = IRQ_UART2_RX+1,
+		.end = IRQ_UART2_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{
@@ -385,9 +400,14 @@ static struct resource bfin_uart3_resources[] = {
 		.end = UART3_RBR+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART3_TX,
+		.end = IRQ_UART3_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART3_RX,
-		.end = IRQ_UART3_RX+1,
+		.end = IRQ_UART3_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{

arch/blackfin/mach-bf561/boards/acvilon.c

@@ -202,9 +202,14 @@ static struct resource bfin_uart0_resources[] = {
 	 .end = BFIN_UART_GCTL + 2,
 	 .flags = IORESOURCE_MEM,
 	 },
+	{
+	 .start = IRQ_UART_TX,
+	 .end = IRQ_UART_TX,
+	 .flags = IORESOURCE_IRQ,
+	 },
 	{
 	 .start = IRQ_UART_RX,
-	 .end = IRQ_UART_RX + 1,
+	 .end = IRQ_UART_RX,
 	 .flags = IORESOURCE_IRQ,
 	 },
 	{

arch/blackfin/mach-bf561/boards/cm_bf561.c

@@ -276,9 +276,14 @@ static struct resource bfin_uart0_resources[] = {
 		.end = BFIN_UART_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART_TX,
+		.end = IRQ_UART_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART_RX,
-		.end = IRQ_UART_RX+1,
+		.end = IRQ_UART_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{

arch/blackfin/mach-bf561/boards/ezkit.c

@@ -171,9 +171,14 @@ static struct resource bfin_uart0_resources[] = {
 		.end = BFIN_UART_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART_TX,
+		.end = IRQ_UART_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART_RX,
-		.end = IRQ_UART_RX+1,
+		.end = IRQ_UART_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{

arch/blackfin/mach-bf561/boards/tepla.c

@@ -50,9 +50,14 @@ static struct resource bfin_uart0_resources[] = {
 		.end = BFIN_UART_GCTL+2,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = IRQ_UART_TX,
+		.end = IRQ_UART_TX,
+		.flags = IORESOURCE_IRQ,
+	},
 	{
 		.start = IRQ_UART_RX,
-		.end = IRQ_UART_RX+1,
+		.end = IRQ_UART_RX,
 		.flags = IORESOURCE_IRQ,
 	},
 	{

arch/cris/arch-v10/drivers/Kconfig

@@ -3,7 +3,7 @@ if ETRAX_ARCH_V10
 config ETRAX_ETHERNET
 	bool "Ethernet support"
 	depends on ETRAX_ARCH_V10
-	select NET_ETHERNET
+	select ETHERNET
 	select NET_CORE
 	select MII
 	help

arch/cris/arch-v32/drivers/Kconfig

@@ -3,7 +3,7 @@ if ETRAX_ARCH_V32
 config ETRAX_ETHERNET
 	bool "Ethernet support"
 	depends on ETRAX_ARCH_V32
-	select NET_ETHERNET
+	select ETHERNET
 	select NET_CORE
 	select MII
 	help

arch/m68k/Kconfig

@@ -4,8 +4,8 @@ config M68K
 	select HAVE_IDE
 	select HAVE_AOUT if MMU
 	select GENERIC_ATOMIC64 if MMU
-	select HAVE_GENERIC_HARDIRQS if !MMU
-	select GENERIC_IRQ_SHOW if !MMU
+	select HAVE_GENERIC_HARDIRQS
+	select GENERIC_IRQ_SHOW
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
 
 config RWSEM_GENERIC_SPINLOCK

arch/m68k/Kconfig.bus

@@ -2,6 +2,15 @@ if MMU
 
 comment "Bus Support"
 
+config DIO
+	bool "DIO bus support"
+	depends on HP300
+	default y
+	help
+	  Say Y here to enable support for the "DIO" expansion bus used in
+	  HP300 machines. If you are using such a system you almost certainly
+	  want this.
+
 config NUBUS
 	bool
 	depends on MAC

arch/m68k/Kconfig.devices

@@ -24,6 +24,37 @@ config PROC_HARDWARE
 	  including the model, CPU, MMU, clock speed, BogoMIPS rating,
 	  and memory size.
 
+config NATFEAT
+	bool "ARAnyM emulator support"
+	depends on ATARI
+	help
+	  This option enables support for ARAnyM native features, such as
+	  access to a disk image as /dev/hda.
+
+config NFBLOCK
+	tristate "NatFeat block device support"
+	depends on BLOCK && NATFEAT
+	help
+	  Say Y to include support for the ARAnyM NatFeat block device
+	  which allows direct access to the hard drives without using
+	  the hardware emulation.
+
+config NFCON
+	tristate "NatFeat console driver"
+	depends on NATFEAT
+	help
+	  Say Y to include support for the ARAnyM NatFeat console driver
+	  which allows the console output to be redirected to the stderr
+	  output of ARAnyM.
+
+config NFETH
+	tristate "NatFeat Ethernet support"
+	depends on ETHERNET && NATFEAT
+	help
+	  Say Y to include support for the ARAnyM NatFeat network device
+	  which will emulate a regular ethernet device while presenting an
+	  ethertap device to the host system.
+
 endmenu
 
 menu "Character devices"