Merge branch 'nfs-for-2.6.32' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6 into for-2.6.32-incoming

Conflicts:
	net/sunrpc/cache.c

.gitignore

@@ -27,6 +27,7 @@
 *.gz
 *.lzma
 *.patch
+*.gcno
 
 #
 # Top-level generic files

CREDITS

@@ -1856,7 +1856,7 @@ E: rfkoenig@immd4.informatik.uni-erlangen.de
 D: The Linux Support Team Erlangen
 
 N: Andreas Koensgen
-E: ajk@iehk.rwth-aachen.de
+E: ajk@comnets.uni-bremen.de
 D: 6pack driver for AX.25
 
 N: Harald Koerfgen
@@ -2006,6 +2006,9 @@ E: paul@laufernet.com
 D: Soundblaster driver fixes, ISAPnP quirk
 S: California, USA
 
+N: Jonathan Layes
+D: ARPD support
+
 N: Tom Lees
 E: tom@lpsg.demon.co.uk
 W: http://www.lpsg.demon.co.uk/
@@ -3802,6 +3805,9 @@ S: van Bronckhorststraat 12
 S: 2612 XV Delft
 S: The Netherlands
 
+N: Thomas Woller
+D: CS461x Cirrus Logic sound driver
+
 N: David Woodhouse
 E: dwmw2@infradead.org
 D: JFFS2 file system, Memory Technology Device subsystem,

Documentation/ABI/testing/sysfs-block

@@ -94,28 +94,37 @@ What:		/sys/block/<disk>/queue/physical_block_size
 Date:		May 2009
 Contact:	Martin K. Petersen <martin.petersen@oracle.com>
 Description:
-		This is the smallest unit the storage device can write
-		without resorting to read-modify-write operation.  It is
-		usually the same as the logical block size but may be
-		bigger.  One example is SATA drives with 4KB sectors
-		that expose a 512-byte logical block size to the
-		operating system.
+		This is the smallest unit a physical storage device can
+		write atomically.  It is usually the same as the logical
+		block size but may be bigger.  One example is SATA
+		drives with 4KB sectors that expose a 512-byte logical
+		block size to the operating system.  For stacked block
+		devices the physical_block_size variable contains the
+		maximum physical_block_size of the component devices.
 
 What:		/sys/block/<disk>/queue/minimum_io_size
 Date:		April 2009
 Contact:	Martin K. Petersen <martin.petersen@oracle.com>
 Description:
-		Storage devices may report a preferred minimum I/O size,
-		which is the smallest request the device can perform
-		without incurring a read-modify-write penalty.  For disk
-		drives this is often the physical block size.  For RAID
-		arrays it is often the stripe chunk size.
+		Storage devices may report a granularity or preferred
+		minimum I/O size which is the smallest request the
+		device can perform without incurring a performance
+		penalty.  For disk drives this is often the physical
+		block size.  For RAID arrays it is often the stripe
+		chunk size.  A properly aligned multiple of
+		minimum_io_size is the preferred request size for
+		workloads where a high number of I/O operations is
+		desired.
 
 What:		/sys/block/<disk>/queue/optimal_io_size
 Date:		April 2009
 Contact:	Martin K. Petersen <martin.petersen@oracle.com>
 Description:
 		Storage devices may report an optimal I/O size, which is
-		the device's preferred unit of receiving I/O.  This is
-		rarely reported for disk drives.  For RAID devices it is
-		usually the stripe width or the internal block size.
+		the device's preferred unit for sustained I/O.  This is
+		rarely reported for disk drives.  For RAID arrays it is
+		usually the stripe width or the internal track size.  A
+		properly aligned multiple of optimal_io_size is the
+		preferred request size for workloads where sustained
+		throughput is desired.  If no optimal I/O size is
+		reported this file contains 0.

Documentation/DocBook/kernel-hacking.tmpl

@@ -449,8 +449,8 @@ printk(KERN_INFO "i = %u\n", i);
    </para>
 
    <programlisting>
-__u32 ipaddress;
-printk(KERN_INFO "my ip: %d.%d.%d.%d\n", NIPQUAD(ipaddress));
+__be32 ipaddress;
+printk(KERN_INFO "my ip: %pI4\n", &amp;ipaddress);
    </programlisting>
 
    <para>

Documentation/DocBook/mac80211.tmpl

@@ -184,8 +184,6 @@ usage should require reading the full document.
 !Finclude/net/mac80211.h ieee80211_ctstoself_get
 !Finclude/net/mac80211.h ieee80211_ctstoself_duration
 !Finclude/net/mac80211.h ieee80211_generic_frame_duration
-!Finclude/net/mac80211.h ieee80211_get_hdrlen_from_skb
-!Finclude/net/mac80211.h ieee80211_hdrlen
 !Finclude/net/mac80211.h ieee80211_wake_queue
 !Finclude/net/mac80211.h ieee80211_stop_queue
 !Finclude/net/mac80211.h ieee80211_wake_queues

Documentation/RCU/rculist_nulls.txt

@@ -83,11 +83,12 @@ not detect it missed following items in original chain.
 obj = kmem_cache_alloc(...);
 lock_chain(); // typically a spin_lock()
 obj->key = key;
-atomic_inc(&obj->refcnt);
 /*
  * we need to make sure obj->key is updated before obj->next
+ * or obj->refcnt
  */
 smp_wmb();
+atomic_set(&obj->refcnt, 1);
 hlist_add_head_rcu(&obj->obj_node, list);
 unlock_chain(); // typically a spin_unlock()
 
@@ -159,6 +160,10 @@ out:
 obj = kmem_cache_alloc(cachep);
 lock_chain(); // typically a spin_lock()
 obj->key = key;
+/*
+ * changes to obj->key must be visible before refcnt one
+ */
+smp_wmb();
 atomic_set(&obj->refcnt, 1);
 /*
  * insert obj in RCU way (readers might be traversing chain)

Documentation/arm/memory.txt

@@ -21,6 +21,8 @@ ffff8000	ffffffff	copy_user_page / clear_user_page use.
 				For SA11xx and Xscale, this is used to
 				setup a minicache mapping.
 
+ffff4000	ffffffff	cache aliasing on ARMv6 and later CPUs.
+
 ffff1000	ffff7fff	Reserved.
 				Platforms must not use this address range.
 

Documentation/block/data-integrity.txt

@@ -50,7 +50,7 @@ encouraged them to allow separation of the data and integrity metadata
 scatter-gather lists.
 
 The controller will interleave the buffers on write and split them on
-read.  This means that the Linux can DMA the data buffers to and from
+read.  This means that Linux can DMA the data buffers to and from
 host memory without changes to the page cache.
 
 Also, the 16-bit CRC checksum mandated by both the SCSI and SATA specs
@@ -66,7 +66,7 @@ software RAID5).
 
 The IP checksum is weaker than the CRC in terms of detecting bit
 errors.  However, the strength is really in the separation of the data
-buffers and the integrity metadata.  These two distinct buffers much
+buffers and the integrity metadata.  These two distinct buffers must
 match up for an I/O to complete.
 
 The separation of the data and integrity metadata buffers as well as

Documentation/cgroups/cpusets.txt

@@ -777,6 +777,18 @@ in cpuset directories:
 # /bin/echo 1-4 > cpus		-> set cpus list to cpus 1,2,3,4
 # /bin/echo 1,2,3,4 > cpus	-> set cpus list to cpus 1,2,3,4
 
+To add a CPU to a cpuset, write the new list of CPUs including the
+CPU to be added. To add 6 to the above cpuset:
+
+# /bin/echo 1-4,6 > cpus	-> set cpus list to cpus 1,2,3,4,6
+
+Similarly to remove a CPU from a cpuset, write the new list of CPUs
+without the CPU to be removed.
+
+To remove all the CPUs:
+
+# /bin/echo "" > cpus		-> clear cpus list
+
 2.3 Setting flags
 -----------------
 

Documentation/connector/cn_test.c

@@ -1,7 +1,7 @@
 /*
  * 	cn_test.c
  * 
- * 2004-2005 Copyright (c) Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * 2004+ Copyright (c) Evgeniy Polyakov <zbr@ioremap.net>
  * All rights reserved.
  * 
  * This program is free software; you can redistribute it and/or modify
@@ -194,5 +194,5 @@ module_init(cn_test_init);
 module_exit(cn_test_fini);
 
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
+MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
 MODULE_DESCRIPTION("Connector's test module");

Documentation/connector/ucon.c

@@ -1,7 +1,7 @@
 /*
  * 	ucon.c
  *
- * Copyright (c) 2004+ Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+ * Copyright (c) 2004+ Evgeniy Polyakov <zbr@ioremap.net>
  *
  *
  * This program is free software; you can redistribute it and/or modify

Documentation/driver-model/driver.txt

@@ -207,8 +207,8 @@ Attributes
 ~~~~~~~~~~
 struct driver_attribute {
         struct attribute        attr;
-        ssize_t (*show)(struct device_driver *, char * buf, size_t count, loff_t off);
-        ssize_t (*store)(struct device_driver *, const char * buf, size_t count, loff_t off);
+        ssize_t (*show)(struct device_driver *driver, char *buf);
+        ssize_t (*store)(struct device_driver *, const char * buf, size_t count);
 };
 
 Device drivers can export attributes via their sysfs directories. 

Documentation/dvb/get_dvb_firmware

@@ -25,7 +25,7 @@ use IO::Handle;
 		"tda10046lifeview", "av7110", "dec2000t", "dec2540t",
 		"dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
 		"or51211", "or51132_qam", "or51132_vsb", "bluebird",
-		"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2" );
+		"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718" );
 
 # Check args
 syntax() if (scalar(@ARGV) != 1);
@@ -381,6 +381,57 @@ sub cx18 {
     $allfiles;
 }
 
+sub mpc718 {
+    my $archive = 'Yuan MPC718 TV Tuner Card 2.13.10.1016.zip';
+    my $url = "ftp://ftp.work.acer-euro.com/desktop/aspire_idea510/vista/Drivers/$archive";
+    my $fwfile = "dvb-cx18-mpc718-mt352.fw";
+    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+    checkstandard();
+    wgetfile($archive, $url);
+    unzip($archive, $tmpdir);
+
+    my $sourcefile = "$tmpdir/Yuan MPC718 TV Tuner Card 2.13.10.1016/mpc718_32bit/yuanrap.sys";
+    my $found = 0;
+
+    open IN, '<', $sourcefile or die "Couldn't open $sourcefile to extract $fwfile data\n";
+    binmode IN;
+    open OUT, '>', $fwfile;
+    binmode OUT;
+    {
+	# Block scope because we change the line terminator variable $/
+	my $prevlen = 0;
+	my $currlen;
+
+	# Buried in the data segment are 3 runs of almost identical
+	# register-value pairs that end in 0x5d 0x01 which is a "TUNER GO"
+	# command for the MT352.
+	# Pull out the middle run (because it's easy) of register-value
+	# pairs to make the "firmware" file.
+
+	local $/ = "\x5d\x01"; # MT352 "TUNER GO"
+
+	while (<IN>) {
+	    $currlen = length($_);
+	    if ($prevlen == $currlen && $currlen <= 64) {
+		chop; chop; # Get rid of "TUNER GO"
+		s/^\0\0//;  # get rid of leading 00 00 if it's there
+		printf OUT "$_";
+		$found = 1;
+		last;
+	    }
+	    $prevlen = $currlen;
+	}
+    }
+    close OUT;
+    close IN;
+    if (!$found) {
+	unlink $fwfile;
+	die "Couldn't find valid register-value sequence in $sourcefile for $fwfile\n";
+    }
+    $fwfile;
+}
+
 sub cx23885 {
     my $url = "http://linuxtv.org/downloads/firmware/";
 

Documentation/feature-removal-schedule.txt

@@ -458,3 +458,13 @@ Why:	Remove the old legacy 32bit machine check code. This has been
 	but the old version has been kept around for easier testing. Note this
 	doesn't impact the old P5 and WinChip machine check handlers.
 Who:	Andi Kleen <andi@firstfloor.org>
+
+----------------------------
+
+What:	lock_policy_rwsem_* and unlock_policy_rwsem_* will not be
+	exported interface anymore.
+When:	2.6.33
+Why:	cpu_policy_rwsem has a new cleaner definition making it local to
+	cpufreq core and contained inside cpufreq.c. Other dependent
+	drivers should not use it in order to safely avoid lockdep issues.
+Who:	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>

Documentation/filesystems/nfs.txt

@@ -0,0 +1,98 @@
+
+The NFS client
+==============
+
+The NFS version 2 protocol was first documented in RFC1094 (March 1989).
+Since then two more major releases of NFS have been published, with NFSv3
+being documented in RFC1813 (June 1995), and NFSv4 in RFC3530 (April
+2003).
+
+The Linux NFS client currently supports all the above published versions,
+and work is in progress on adding support for minor version 1 of the NFSv4
+protocol.
+
+The purpose of this document is to provide information on some of the
+upcall interfaces that are used in order to provide the NFS client with
+some of the information that it requires in order to fully comply with
+the NFS spec.
+
+The DNS resolver
+================
+
+NFSv4 allows for one server to refer the NFS client to data that has been
+migrated onto another server by means of the special "fs_locations"
+attribute. See
+	http://tools.ietf.org/html/rfc3530#section-6
+and
+	http://tools.ietf.org/html/draft-ietf-nfsv4-referrals-00
+
+The fs_locations information can take the form of either an ip address and
+a path, or a DNS hostname and a path. The latter requires the NFS client to
+do a DNS lookup in order to mount the new volume, and hence the need for an
+upcall to allow userland to provide this service.
+
+Assuming that the user has the 'rpc_pipefs' filesystem mounted in the usual
+/var/lib/nfs/rpc_pipefs, the upcall consists of the following steps:
+
+   (1) The process checks the dns_resolve cache to see if it contains a
+       valid entry. If so, it returns that entry and exits.
+
+   (2) If no valid entry exists, the helper script '/sbin/nfs_cache_getent'
+       (may be changed using the 'nfs.cache_getent' kernel boot parameter)
+       is run, with two arguments:
+		- the cache name, "dns_resolve"
+		- the hostname to resolve
+
+   (3) After looking up the corresponding ip address, the helper script
+       writes the result into the rpc_pipefs pseudo-file
+       '/var/lib/nfs/rpc_pipefs/cache/dns_resolve/channel'
+       in the following (text) format:
+
+		"<ip address> <hostname> <ttl>\n"
+
+       Where <ip address> is in the usual IPv4 (123.456.78.90) or IPv6
+       (ffee:ddcc:bbaa:9988:7766:5544:3322:1100, ffee::1100, ...) format.
+       <hostname> is identical to the second argument of the helper
+       script, and <ttl> is the 'time to live' of this cache entry (in
+       units of seconds).
+
+       Note: If <ip address> is invalid, say the string "0", then a negative
+       entry is created, which will cause the kernel to treat the hostname
+       as having no valid DNS translation.
+
+
+
+
+A basic sample /sbin/nfs_cache_getent
+=====================================
+
+#!/bin/bash
+#
+ttl=600
+#
+cut=/usr/bin/cut
+getent=/usr/bin/getent
+rpc_pipefs=/var/lib/nfs/rpc_pipefs
+#
+die()
+{
+	echo "Usage: $0 cache_name entry_name"
+	exit 1
+}
+
+[ $# -lt 2 ] && die
+cachename="$1"
+cache_path=${rpc_pipefs}/cache/${cachename}/channel
+
+case "${cachename}" in
+	dns_resolve)
+		name="$2"
+		result="$(${getent} hosts ${name} | ${cut} -f1 -d\ )"
+		[ -z "${result}" ] && result="0"
+		;;
+	*)
+		die
+		;;
+esac
+echo "${result} ${name} ${ttl}" >${cache_path}
+

Documentation/filesystems/sysfs.txt

@@ -23,7 +23,8 @@ interface.
 Using sysfs
 ~~~~~~~~~~~
 
-sysfs is always compiled in. You can access it by doing:
+sysfs is always compiled in if CONFIG_SYSFS is defined. You can access
+it by doing:
 
     mount -t sysfs sysfs /sys 
 

Documentation/gcov.txt

@@ -188,13 +188,18 @@ Solution: Exclude affected source files from profiling by specifying
           GCOV_PROFILE := n or GCOV_PROFILE_basename.o := n in the
           corresponding Makefile.
 
+Problem:  Files copied from sysfs appear empty or incomplete.
+Cause:    Due to the way seq_file works, some tools such as cp or tar
+          may not correctly copy files from sysfs.
+Solution: Use 'cat' to read .gcda files and 'cp -d' to copy links.
+          Alternatively use the mechanism shown in Appendix B.
+
 
 Appendix A: gather_on_build.sh
 ==============================
 
 Sample script to gather coverage meta files on the build machine
 (see 6a):
-
 #!/bin/bash
 
 KSRC=$1
@@ -226,7 +231,7 @@ Appendix B: gather_on_test.sh
 Sample script to gather coverage data files on the test machine
 (see 6b):
 
-#!/bin/bash
+#!/bin/bash -e
 
 DEST=$1
 GCDA=/sys/kernel/debug/gcov
@@ -236,11 +241,13 @@ if [ -z "$DEST" ] ; then
   exit 1
 fi
 
-find $GCDA -name '*.gcno' -o -name '*.gcda' | tar cfz $DEST -T -
+TEMPDIR=$(mktemp -d)
+echo Collecting data..
+find $GCDA -type d -exec mkdir -p $TEMPDIR/\{\} \;
+find $GCDA -name '*.gcda' -exec sh -c 'cat < $0 > '$TEMPDIR'/$0' {} \;
+find $GCDA -name '*.gcno' -exec sh -c 'cp -d $0 '$TEMPDIR'/$0' {} \;
+tar czf $DEST -C $TEMPDIR sys
+rm -rf $TEMPDIR
 
-if [ $? -eq 0 ] ; then
-  echo "$DEST successfully created, copy to build system and unpack with:"
-  echo "  tar xfz $DEST"
-else
-  echo "Could not create file $DEST"
-fi
+echo "$DEST successfully created, copy to build system and unpack with:"
+echo "  tar xfz $DEST"

Documentation/ioctl/ioctl-number.txt

@@ -139,6 +139,7 @@ Code	Seq#	Include File		Comments
 'm'	all	linux/synclink.h	conflict!
 'm'	00-1F	net/irda/irmod.h	conflict!
 'n'	00-7F	linux/ncp_fs.h
+'n'	80-8F	linux/nilfs2_fs.h	NILFS2
 'n'	E0-FF	video/matrox.h          matroxfb
 'o'	00-1F	fs/ocfs2/ocfs2_fs.h	OCFS2
 'o'     00-03   include/mtd/ubi-user.h  conflict! (OCFS2 and UBI overlaps)

Documentation/kernel-parameters.txt

@@ -1115,6 +1115,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			libata.dma=4	  Compact Flash DMA only 
 			Combinations also work, so libata.dma=3 enables DMA
 			for disks and CDROMs, but not CFs.
+	
+	libata.ignore_hpa=	[LIBATA] Ignore HPA limit
+			libata.ignore_hpa=0	  keep BIOS limits (default)
+			libata.ignore_hpa=1	  ignore limits, using full disk
 
 	libata.noacpi	[LIBATA] Disables use of ACPI in libata suspend/resume
 			when set.
@@ -1499,6 +1503,14 @@ and is between 256 and 4096 characters. It is defined in the file
 			[NFS] set the TCP port on which the NFSv4 callback
 			channel should listen.
 
+	nfs.cache_getent=
+			[NFS] sets the pathname to the program which is used
+			to update the NFS client cache entries.
+
+	nfs.cache_getent_timeout=
+			[NFS] sets the timeout after which an attempt to
+			update a cache entry is deemed to have failed.
+
 	nfs.idmap_cache_timeout=
 			[NFS] set the maximum lifetime for idmapper cache
 			entries.
@@ -1720,8 +1732,8 @@ and is between 256 and 4096 characters. It is defined in the file
 	oprofile.cpu_type=	Force an oprofile cpu type
 			This might be useful if you have an older oprofile
 			userland or if you want common events.
-			Format: { archperfmon }
-			archperfmon: [X86] Force use of architectural
+			Format: { arch_perfmon }
+			arch_perfmon: [X86] Force use of architectural
 				perfmon on Intel CPUs instead of the
 				CPU specific event set.
 
@@ -1915,6 +1927,12 @@ and is between 256 and 4096 characters. It is defined in the file
 			Format: { 0 | 1 }
 			See arch/parisc/kernel/pdc_chassis.c
 
+	percpu_alloc=	[X86] Select which percpu first chunk allocator to use.
+			Allowed values are one of "lpage", "embed" and "4k".
+			See comments in arch/x86/kernel/setup_percpu.c for
+			details on each allocator.  This parameter is primarily
+			for debugging and performance comparison.
+
 	pf.		[PARIDE]
 			See Documentation/blockdev/paride.txt.
 
@@ -2385,6 +2403,18 @@ and is between 256 and 4096 characters. It is defined in the file
 	stifb=		[HW]
 			Format: bpp:<bpp1>[:<bpp2>[:<bpp3>...]]
 
+	sunrpc.min_resvport=
+	sunrpc.max_resvport=
+			[NFS,SUNRPC]
+			SunRPC servers often require that client requests
+			originate from a privileged port (i.e. a port in the
+			range 0 < portnr < 1024).
+			An administrator who wishes to reserve some of these
+			ports for other uses may adjust the range that the
+			kernel's sunrpc client considers to be privileged
+			using these two parameters to set the minimum and
+			maximum port values.
+
 	sunrpc.pool_mode=
 			[NFS]
 			Control how the NFS server code allocates CPUs to
@@ -2401,6 +2431,15 @@ and is between 256 and 4096 characters. It is defined in the file
 			pernode	    one pool for each NUMA node (equivalent
 				    to global on non-NUMA machines)
 
+	sunrpc.tcp_slot_table_entries=
+	sunrpc.udp_slot_table_entries=
+			[NFS,SUNRPC]
+			Sets the upper limit on the number of simultaneous
+			RPC calls that can be sent from the client to a
+			server. Increasing these values may allow you to
+			improve throughput, but will also increase the
+			amount of memory reserved for use by the client.
+
 	swiotlb=	[IA-64] Number of I/O TLB slabs
 
 	switches=	[HW,M68k]
@@ -2467,7 +2506,8 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	tp720=		[HW,PS2]
 
-	trace_buf_size=nn[KMG] [ftrace] will set tracing buffer size.
+	trace_buf_size=nn[KMG]
+			[FTRACE] will set tracing buffer size.
 
 	trix=		[HW,OSS] MediaTrix AudioTrix Pro
 			Format:

Documentation/kmemleak.txt

@@ -16,13 +16,17 @@ Usage
 -----
 
 CONFIG_DEBUG_KMEMLEAK in "Kernel hacking" has to be enabled. A kernel
-thread scans the memory every 10 minutes (by default) and prints any new
-unreferenced objects found. To trigger an intermediate scan and display
-all the possible memory leaks:
+thread scans the memory every 10 minutes (by default) and prints the
+number of new unreferenced objects found. To display the details of all
+the possible memory leaks:
 
   # mount -t debugfs nodev /sys/kernel/debug/
   # cat /sys/kernel/debug/kmemleak
 
+To trigger an intermediate memory scan:
+
+  # echo scan > /sys/kernel/debug/kmemleak
+
 Note that the orphan objects are listed in the order they were allocated
 and one object at the beginning of the list may cause other subsequent
 objects to be reported as orphan.
@@ -31,16 +35,21 @@ Memory scanning parameters can be modified at run-time by writing to the
 /sys/kernel/debug/kmemleak file. The following parameters are supported:
 
   off		- disable kmemleak (irreversible)
-  stack=on	- enable the task stacks scanning
+  stack=on	- enable the task stacks scanning (default)
   stack=off	- disable the tasks stacks scanning
-  scan=on	- start the automatic memory scanning thread
+  scan=on	- start the automatic memory scanning thread (default)
   scan=off	- stop the automatic memory scanning thread
-  scan=<secs>	- set the automatic memory scanning period in seconds (0
-		  to disable it)
+  scan=<secs>	- set the automatic memory scanning period in seconds
+		  (default 600, 0 to stop the automatic scanning)
+  scan		- trigger a memory scan
 
 Kmemleak can also be disabled at boot-time by passing "kmemleak=off" on
 the kernel command line.
 
+Memory may be allocated or freed before kmemleak is initialised and
+these actions are stored in an early log buffer. The size of this buffer
+is configured via the CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE option.
+
 Basic Algorithm
 ---------------
 

Documentation/laptops/thinkpad-acpi.txt

@@ -36,8 +36,6 @@ detailed description):
 	- Bluetooth enable and disable
 	- video output switching, expansion control
 	- ThinkLight on and off
-	- limited docking and undocking
-	- UltraBay eject
 	- CMOS/UCMS control
 	- LED control
 	- ACPI sounds
@@ -729,131 +727,6 @@ cannot be read or if it is unknown, thinkpad-acpi will report it as "off".
 It is impossible to know if the status returned through sysfs is valid.
 
 
-Docking / undocking -- /proc/acpi/ibm/dock
-------------------------------------------
-
-Docking and undocking (e.g. with the X4 UltraBase) requires some
-actions to be taken by the operating system to safely make or break
-the electrical connections with the dock.
-
-The docking feature of this driver generates the following ACPI events:
-
-	ibm/dock GDCK 00000003 00000001 -- eject request
-	ibm/dock GDCK 00000003 00000002 -- undocked
-	ibm/dock GDCK 00000000 00000003 -- docked
-
-NOTE: These events will only be generated if the laptop was docked
-when originally booted. This is due to the current lack of support for
-hot plugging of devices in the Linux ACPI framework. If the laptop was
-booted while not in the dock, the following message is shown in the
-logs:
-
-	Mar 17 01:42:34 aero kernel: thinkpad_acpi: dock device not present
-
-In this case, no dock-related events are generated but the dock and
-undock commands described below still work. They can be executed
-manually or triggered by Fn key combinations (see the example acpid
-configuration files included in the driver tarball package available
-on the web site).
-
-When the eject request button on the dock is pressed, the first event
-above is generated. The handler for this event should issue the
-following command:
-
-	echo undock > /proc/acpi/ibm/dock
-
-After the LED on the dock goes off, it is safe to eject the laptop.
-Note: if you pressed this key by mistake, go ahead and eject the
-laptop, then dock it back in. Otherwise, the dock may not function as
-expected.
-
-When the laptop is docked, the third event above is generated. The
-handler for this event should issue the following command to fully
-enable the dock:
-
-	echo dock > /proc/acpi/ibm/dock
-
-The contents of the /proc/acpi/ibm/dock file shows the current status
-of the dock, as provided by the ACPI framework.
-
-The docking support in this driver does not take care of enabling or
-disabling any other devices you may have attached to the dock. For
-example, a CD drive plugged into the UltraBase needs to be disabled or
-enabled separately. See the provided example acpid configuration files
-for how this can be accomplished.
-
-There is no support yet for PCI devices that may be attached to a
-docking station, e.g. in the ThinkPad Dock II. The driver currently
-does not recognize, enable or disable such devices. This means that
-the only docking stations currently supported are the X-series
-UltraBase docks and "dumb" port replicators like the Mini Dock (the
-latter don't need any ACPI support, actually).
-
-
-UltraBay eject -- /proc/acpi/ibm/bay
-------------------------------------
-
-Inserting or ejecting an UltraBay device requires some actions to be
-taken by the operating system to safely make or break the electrical
-connections with the device.
-
-This feature generates the following ACPI events:
-
-	ibm/bay MSTR 00000003 00000000 -- eject request
-	ibm/bay MSTR 00000001 00000000 -- eject lever inserted
-
-NOTE: These events will only be generated if the UltraBay was present
-when the laptop was originally booted (on the X series, the UltraBay
-is in the dock, so it may not be present if the laptop was undocked).
-This is due to the current lack of support for hot plugging of devices
-in the Linux ACPI framework. If the laptop was booted without the
-UltraBay, the following message is shown in the logs:
-
-	Mar 17 01:42:34 aero kernel: thinkpad_acpi: bay device not present
-
-In this case, no bay-related events are generated but the eject
-command described below still works. It can be executed manually or
-triggered by a hot key combination.
-
-Sliding the eject lever generates the first event shown above. The
-handler for this event should take whatever actions are necessary to
-shut down the device in the UltraBay (e.g. call idectl), then issue
-the following command:
-
-	echo eject > /proc/acpi/ibm/bay
-
-After the LED on the UltraBay goes off, it is safe to pull out the
-device.
-
-When the eject lever is inserted, the second event above is
-generated. The handler for this event should take whatever actions are
-necessary to enable the UltraBay device (e.g. call idectl).
-
-The contents of the /proc/acpi/ibm/bay file shows the current status
-of the UltraBay, as provided by the ACPI framework.
-
-EXPERIMENTAL warm eject support on the 600e/x, A22p and A3x (To use
-this feature, you need to supply the experimental=1 parameter when
-loading the module):
-
-These models do not have a button near the UltraBay device to request
-a hot eject but rather require the laptop to be put to sleep
-(suspend-to-ram) before the bay device is ejected or inserted).
-The sequence of steps to eject the device is as follows:
-
-	echo eject > /proc/acpi/ibm/bay
-	put the ThinkPad to sleep
-	remove the drive
-	resume from sleep
-	cat /proc/acpi/ibm/bay should show that the drive was removed
-
-On the A3x, both the UltraBay 2000 and UltraBay Plus devices are
-supported. Use "eject2" instead of "eject" for the second bay.
-
-Note: the UltraBay eject support on the 600e/x, A22p and A3x is
-EXPERIMENTAL and may not work as expected. USE WITH CAUTION!
-
-
 CMOS/UCMS control
 -----------------
 

Documentation/leds-lp3944.txt

@@ -0,0 +1,50 @@
+Kernel driver lp3944
+====================
+
+  * National Semiconductor LP3944 Fun-light Chip
+    Prefix: 'lp3944'
+    Addresses scanned: None (see the Notes section below)
+    Datasheet: Publicly available at the National Semiconductor website
+               http://www.national.com/pf/LP/LP3944.html
+
+Authors:
+        Antonio Ospite <ospite@studenti.unina.it>
+
+
+Description
+-----------
+The LP3944 is a helper chip that can drive up to 8 leds, with two programmable
+DIM modes; it could even be used as a gpio expander but this driver assumes it
+is used as a led controller.
+
+The DIM modes are used to set _blink_ patterns for leds, the pattern is
+specified supplying two parameters:
+  - period: from 0s to 1.6s
+  - duty cycle: percentage of the period the led is on, from 0 to 100
+
+Setting a led in DIM0 or DIM1 mode makes it blink according to the pattern.
+See the datasheet for details.
+
+LP3944 can be found on Motorola A910 smartphone, where it drives the rgb
+leds, the camera flash light and the lcds power.
+
+
+Notes
+-----
+The chip is used mainly in embedded contexts, so this driver expects it is
+registered using the i2c_board_info mechanism.
+
+To register the chip at address 0x60 on adapter 0, set the platform data
+according to include/linux/leds-lp3944.h, set the i2c board info:
+
+	static struct i2c_board_info __initdata a910_i2c_board_info[] = {
+		{
+			I2C_BOARD_INFO("lp3944", 0x60),
+			.platform_data = &a910_lp3944_leds,
+		},
+	};
+
+and register it in the platform init function
+
+	i2c_register_board_info(0, a910_i2c_board_info,
+			ARRAY_SIZE(a910_i2c_board_info));

Documentation/lockdep-design.txt

@@ -30,9 +30,9 @@ State
 The validator tracks lock-class usage history into 4n + 1 separate state bits:
 
 - 'ever held in STATE context'
-- 'ever head as readlock in STATE context'
-- 'ever head with STATE enabled'
-- 'ever head as readlock with STATE enabled'
+- 'ever held as readlock in STATE context'
+- 'ever held with STATE enabled'
+- 'ever held as readlock with STATE enabled'
 
 Where STATE can be either one of (kernel/lockdep_states.h)
  - hardirq

Documentation/networking/6pack.txt

@@ -1,7 +1,7 @@
 This is the 6pack-mini-HOWTO, written by
 
 Andreas Könsgen DG3KQ
-Internet: ajk@iehk.rwth-aachen.de
+Internet: ajk@comnets.uni-bremen.de
 AMPR-net: dg3kq@db0pra.ampr.org
 AX.25:    dg3kq@db0ach.#nrw.deu.eu
 

Documentation/powerpc/dts-bindings/4xx/emac.txt

@@ -0,0 +1,148 @@
+    4xx/Axon EMAC ethernet nodes
+
+    The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
+    the Axon bridge.  To operate this needs to interact with a ths
+    special McMAL DMA controller, and sometimes an RGMII or ZMII
+    interface.  In addition to the nodes and properties described
+    below, the node for the OPB bus on which the EMAC sits must have a
+    correct clock-frequency property.
+
+      i) The EMAC node itself
+
+    Required properties:
+    - device_type       : "network"
+
+    - compatible        : compatible list, contains 2 entries, first is
+			  "ibm,emac-CHIP" where CHIP is the host ASIC (440gx,
+			  405gp, Axon) and second is either "ibm,emac" or
+			  "ibm,emac4".  For Axon, thus, we have: "ibm,emac-axon",
+			  "ibm,emac4"
+    - interrupts        : <interrupt mapping for EMAC IRQ and WOL IRQ>
+    - interrupt-parent  : optional, if needed for interrupt mapping
+    - reg               : <registers mapping>
+    - local-mac-address : 6 bytes, MAC address
+    - mal-device        : phandle of the associated McMAL node
+    - mal-tx-channel    : 1 cell, index of the tx channel on McMAL associated
+			  with this EMAC
+    - mal-rx-channel    : 1 cell, index of the rx channel on McMAL associated
+			  with this EMAC
+    - cell-index        : 1 cell, hardware index of the EMAC cell on a given
+			  ASIC (typically 0x0 and 0x1 for EMAC0 and EMAC1 on
+			  each Axon chip)
+    - max-frame-size    : 1 cell, maximum frame size supported in bytes
+    - rx-fifo-size      : 1 cell, Rx fifo size in bytes for 10 and 100 Mb/sec
+			  operations.
+			  For Axon, 2048
+    - tx-fifo-size      : 1 cell, Tx fifo size in bytes for 10 and 100 Mb/sec
+			  operations.
+			  For Axon, 2048.
+    - fifo-entry-size   : 1 cell, size of a fifo entry (used to calculate
+			  thresholds).
+			  For Axon, 0x00000010
+    - mal-burst-size    : 1 cell, MAL burst size (used to calculate thresholds)
+			  in bytes.
+			  For Axon, 0x00000100 (I think ...)
+    - phy-mode          : string, mode of operations of the PHY interface.
+			  Supported values are: "mii", "rmii", "smii", "rgmii",
+			  "tbi", "gmii", rtbi", "sgmii".
+			  For Axon on CAB, it is "rgmii"
+    - mdio-device       : 1 cell, required iff using shared MDIO registers
+			  (440EP).  phandle of the EMAC to use to drive the
+			  MDIO lines for the PHY used by this EMAC.
+    - zmii-device       : 1 cell, required iff connected to a ZMII.  phandle of
+			  the ZMII device node
+    - zmii-channel      : 1 cell, required iff connected to a ZMII.  Which ZMII
+			  channel or 0xffffffff if ZMII is only used for MDIO.
+    - rgmii-device      : 1 cell, required iff connected to an RGMII. phandle
+			  of the RGMII device node.
+			  For Axon: phandle of plb5/plb4/opb/rgmii
+    - rgmii-channel     : 1 cell, required iff connected to an RGMII.  Which
+			  RGMII channel is used by this EMAC.
+			  Fox Axon: present, whatever value is appropriate for each
+			  EMAC, that is the content of the current (bogus) "phy-port"
+			  property.
+
+    Optional properties:
+    - phy-address       : 1 cell, optional, MDIO address of the PHY. If absent,
+			  a search is performed.
+    - phy-map           : 1 cell, optional, bitmap of addresses to probe the PHY
+			  for, used if phy-address is absent. bit 0x00000001 is
+			  MDIO address 0.
+			  For Axon it can be absent, though my current driver
+			  doesn't handle phy-address yet so for now, keep
+			  0x00ffffff in it.
+    - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec
+			  operations (if absent the value is the same as
+			  rx-fifo-size).  For Axon, either absent or 2048.
+    - tx-fifo-size-gige : 1 cell, Tx fifo size in bytes for 1000 Mb/sec
+			  operations (if absent the value is the same as
+			  tx-fifo-size). For Axon, either absent or 2048.
+    - tah-device        : 1 cell, optional. If connected to a TAH engine for
+			  offload, phandle of the TAH device node.
+    - tah-channel       : 1 cell, optional. If appropriate, channel used on the
+			  TAH engine.
+
+    Example:
+
+	EMAC0: ethernet@40000800 {
+		device_type = "network";
+		compatible = "ibm,emac-440gp", "ibm,emac";
+		interrupt-parent = <&UIC1>;
+		interrupts = <1c 4 1d 4>;
+		reg = <40000800 70>;
+		local-mac-address = [00 04 AC E3 1B 1E];
+		mal-device = <&MAL0>;
+		mal-tx-channel = <0 1>;
+		mal-rx-channel = <0>;
+		cell-index = <0>;
+		max-frame-size = <5dc>;
+		rx-fifo-size = <1000>;
+		tx-fifo-size = <800>;
+		phy-mode = "rmii";
+		phy-map = <00000001>;
+		zmii-device = <&ZMII0>;
+		zmii-channel = <0>;
+	};
+
+      ii) McMAL node
+
+    Required properties:
+    - device_type        : "dma-controller"
+    - compatible         : compatible list, containing 2 entries, first is
+			   "ibm,mcmal-CHIP" where CHIP is the host ASIC (like
+			   emac) and the second is either "ibm,mcmal" or
+			   "ibm,mcmal2".
+			   For Axon, "ibm,mcmal-axon","ibm,mcmal2"
+    - interrupts         : <interrupt mapping for the MAL interrupts sources:
+                           5 sources: tx_eob, rx_eob, serr, txde, rxde>.
+                           For Axon: This is _different_ from the current
+			   firmware.  We use the "delayed" interrupts for txeob
+			   and rxeob. Thus we end up with mapping those 5 MPIC
+			   interrupts, all level positive sensitive: 10, 11, 32,
+			   33, 34 (in decimal)
+    - dcr-reg            : < DCR registers range >
+    - dcr-parent         : if needed for dcr-reg
+    - num-tx-chans       : 1 cell, number of Tx channels
+    - num-rx-chans       : 1 cell, number of Rx channels
+
+      iii) ZMII node
+
+    Required properties:
+    - compatible         : compatible list, containing 2 entries, first is
+			   "ibm,zmii-CHIP" where CHIP is the host ASIC (like
+			   EMAC) and the second is "ibm,zmii".
+			   For Axon, there is no ZMII node.
+    - reg                : <registers mapping>
+
+      iv) RGMII node
+
+    Required properties:
+    - compatible         : compatible list, containing 2 entries, first is
+			   "ibm,rgmii-CHIP" where CHIP is the host ASIC (like
+			   EMAC) and the second is "ibm,rgmii".
+                           For Axon, "ibm,rgmii-axon","ibm,rgmii"
+    - reg                : <registers mapping>
+    - revision           : as provided by the RGMII new version register if
+			   available.
+			   For Axon: 0x0000012a
+

Documentation/powerpc/dts-bindings/gpio/gpio.txt

@@ -0,0 +1,50 @@
+Specifying GPIO information for devices
+============================================
+
+1) gpios property
+-----------------
+
+Nodes that makes use of GPIOs should define them using `gpios' property,
+format of which is: <&gpio-controller1-phandle gpio1-specifier
+		     &gpio-controller2-phandle gpio2-specifier
+		     0 /* holes are permitted, means no GPIO 3 */
+		     &gpio-controller4-phandle gpio4-specifier
+		     ...>;
+
+Note that gpio-specifier length is controller dependent.
+
+gpio-specifier may encode: bank, pin position inside the bank,
+whether pin is open-drain and whether pin is logically inverted.
+
+Example of the node using GPIOs:
+
+	node {
+		gpios = <&qe_pio_e 18 0>;
+	};
+
+In this example gpio-specifier is "18 0" and encodes GPIO pin number,
+and empty GPIO flags as accepted by the "qe_pio_e" gpio-controller.
+
+2) gpio-controller nodes
+------------------------
+
+Every GPIO controller node must have #gpio-cells property defined,
+this information will be used to translate gpio-specifiers.
+
+Example of two SOC GPIO banks defined as gpio-controller nodes:
+
+	qe_pio_a: gpio-controller@1400 {
+		#gpio-cells = <2>;
+		compatible = "fsl,qe-pario-bank-a", "fsl,qe-pario-bank";
+		reg = <0x1400 0x18>;
+		gpio-controller;
+	};
+
+	qe_pio_e: gpio-controller@1460 {
+		#gpio-cells = <2>;
+		compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
+		reg = <0x1460 0x18>;
+		gpio-controller;
+	};
+
+

Documentation/powerpc/dts-bindings/gpio/led.txt

@@ -16,10 +16,17 @@ LED sub-node properties:
   string defining the trigger assigned to the LED.  Current triggers are:
     "backlight" - LED will act as a back-light, controlled by the framebuffer
 		  system
-    "default-on" - LED will turn on
+    "default-on" - LED will turn on, but see "default-state" below
     "heartbeat" - LED "double" flashes at a load average based rate
     "ide-disk" - LED indicates disk activity
     "timer" - LED flashes at a fixed, configurable rate
+- default-state:  (optional) The initial state of the LED.  Valid
+  values are "on", "off", and "keep".  If the LED is already on or off
+  and the default-state property is set the to same value, then no
+  glitch should be produced where the LED momentarily turns off (or
+  on).  The "keep" setting will keep the LED at whatever its current
+  state is, without producing a glitch.  The default is off if this
+  property is not present.
 
 Examples:
 
@@ -30,14 +37,22 @@ leds {
 		gpios = <&mcu_pio 0 1>; /* Active low */
 		linux,default-trigger = "ide-disk";
 	};
+
+	fault {
+		gpios = <&mcu_pio 1 0>;
+		/* Keep LED on if BIOS detected hardware fault */
+		default-state = "keep";
+	};
 };
 
 run-control {
 	compatible = "gpio-leds";
 	red {
 		gpios = <&mpc8572 6 0>;
+		default-state = "off";
 	};
 	green {
 		gpios = <&mpc8572 7 0>;
+		default-state = "on";
 	};
 }

Documentation/powerpc/dts-bindings/gpio/mdio.txt

@@ -0,0 +1,19 @@
+MDIO on GPIOs
+
+Currently defined compatibles:
+- virtual,gpio-mdio
+
+MDC and MDIO lines connected to GPIO controllers are listed in the
+gpios property as described in section VIII.1 in the following order:
+
+MDC, MDIO.
+
+Example:
+
+mdio {
+	compatible = "virtual,mdio-gpio";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	gpios = <&qe_pio_a 11
+		 &qe_pio_c 6>;
+};

Documentation/powerpc/dts-bindings/marvell.txt

@@ -0,0 +1,521 @@
+Marvell Discovery mv64[345]6x System Controller chips
+===========================================================
+
+The Marvell mv64[345]60 series of system controller chips contain
+many of the peripherals needed to implement a complete computer
+system.  In this section, we define device tree nodes to describe
+the system controller chip itself and each of the peripherals
+which it contains.  Compatible string values for each node are
+prefixed with the string "marvell,", for Marvell Technology Group Ltd.
+
+1) The /system-controller node
+
+  This node is used to represent the system-controller and must be
+  present when the system uses a system controller chip. The top-level
+  system-controller node contains information that is global to all
+  devices within the system controller chip. The node name begins
+  with "system-controller" followed by the unit address, which is
+  the base address of the memory-mapped register set for the system
+  controller chip.
+
+  Required properties:
+
+    - ranges : Describes the translation of system controller addresses
+      for memory mapped registers.
+    - clock-frequency: Contains the main clock frequency for the system
+      controller chip.
+    - reg : This property defines the address and size of the
+      memory-mapped registers contained within the system controller
+      chip.  The address specified in the "reg" property should match
+      the unit address of the system-controller node.
+    - #address-cells : Address representation for system controller
+      devices.  This field represents the number of cells needed to
+      represent the address of the memory-mapped registers of devices
+      within the system controller chip.
+    - #size-cells : Size representation for for the memory-mapped
+      registers within the system controller chip.
+    - #interrupt-cells : Defines the width of cells used to represent
+      interrupts.
+
+  Optional properties:
+
+    - model : The specific model of the system controller chip.  Such
+      as, "mv64360", "mv64460", or "mv64560".
+    - compatible : A string identifying the compatibility identifiers
+      of the system controller chip.
+
+  The system-controller node contains child nodes for each system
+  controller device that the platform uses.  Nodes should not be created
+  for devices which exist on the system controller chip but are not used
+
+  Example Marvell Discovery mv64360 system-controller node:
+
+    system-controller@f1000000 { /* Marvell Discovery mv64360 */
+	    #address-cells = <1>;
+	    #size-cells = <1>;
+	    model = "mv64360";                      /* Default */
+	    compatible = "marvell,mv64360";
+	    clock-frequency = <133333333>;
+	    reg = <0xf1000000 0x10000>;
+	    virtual-reg = <0xf1000000>;
+	    ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
+		    0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
+		    0xa0000000 0xa0000000 0x4000000 /* User FLASH */
+		    0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
+		    0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
+
+	    [ child node definitions... ]
+    }
+
+2) Child nodes of /system-controller
+
+   a) Marvell Discovery MDIO bus
+
+   The MDIO is a bus to which the PHY devices are connected.  For each
+   device that exists on this bus, a child node should be created.  See
+   the definition of the PHY node below for an example of how to define
+   a PHY.
+
+   Required properties:
+     - #address-cells : Should be <1>
+     - #size-cells : Should be <0>
+     - device_type : Should be "mdio"
+     - compatible : Should be "marvell,mv64360-mdio"
+
+   Example:
+
+     mdio {
+	     #address-cells = <1>;
+	     #size-cells = <0>;
+	     device_type = "mdio";
+	     compatible = "marvell,mv64360-mdio";
+
+	     ethernet-phy@0 {
+		     ......
+	     };
+     };
+
+
+   b) Marvell Discovery ethernet controller
+
+   The Discover ethernet controller is described with two levels
+   of nodes.  The first level describes an ethernet silicon block
+   and the second level describes up to 3 ethernet nodes within
+   that block.  The reason for the multiple levels is that the
+   registers for the node are interleaved within a single set
+   of registers.  The "ethernet-block" level describes the
+   shared register set, and the "ethernet" nodes describe ethernet
+   port-specific properties.
+
+   Ethernet block node
+
+   Required properties:
+     - #address-cells : <1>
+     - #size-cells : <0>
+     - compatible : "marvell,mv64360-eth-block"
+     - reg : Offset and length of the register set for this block
+
+   Example Discovery Ethernet block node:
+     ethernet-block@2000 {
+	     #address-cells = <1>;
+	     #size-cells = <0>;
+	     compatible = "marvell,mv64360-eth-block";
+	     reg = <0x2000 0x2000>;
+	     ethernet@0 {
+		     .......
+	     };
+     };
+
+   Ethernet port node
+
+   Required properties:
+     - device_type : Should be "network".
+     - compatible : Should be "marvell,mv64360-eth".
+     - reg : Should be <0>, <1>, or <2>, according to which registers
+       within the silicon block the device uses.
+     - interrupts : <a> where a is the interrupt number for the port.
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+     - phy : the phandle for the PHY connected to this ethernet
+       controller.
+     - local-mac-address : 6 bytes, MAC address
+
+   Example Discovery Ethernet port node:
+     ethernet@0 {
+	     device_type = "network";
+	     compatible = "marvell,mv64360-eth";
+	     reg = <0>;
+	     interrupts = <32>;
+	     interrupt-parent = <&PIC>;
+	     phy = <&PHY0>;
+	     local-mac-address = [ 00 00 00 00 00 00 ];
+     };
+
+
+
+   c) Marvell Discovery PHY nodes
+
+   Required properties:
+     - device_type : Should be "ethernet-phy"
+     - interrupts : <a> where a is the interrupt number for this phy.
+     - interrupt-parent : the phandle for the interrupt controller that
+       services interrupts for this device.
+     - reg : The ID number for the phy, usually a small integer
+
+   Example Discovery PHY node:
+     ethernet-phy@1 {
+	     device_type = "ethernet-phy";
+	     compatible = "broadcom,bcm5421";
+	     interrupts = <76>;      /* GPP 12 */
+	     interrupt-parent = <&PIC>;
+	     reg = <1>;
+     };
+
+
+   d) Marvell Discovery SDMA nodes
+
+   Represent DMA hardware associated with the MPSC (multiprotocol
+   serial controllers).
+
+   Required properties:
+     - compatible : "marvell,mv64360-sdma"
+     - reg : Offset and length of the register set for this device
+     - interrupts : <a> where a is the interrupt number for the DMA
+       device.
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery SDMA node:
+     sdma@4000 {
+	     compatible = "marvell,mv64360-sdma";
+	     reg = <0x4000 0xc18>;
+	     virtual-reg = <0xf1004000>;
+	     interrupts = <36>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
+   e) Marvell Discovery BRG nodes
+
+   Represent baud rate generator hardware associated with the MPSC
+   (multiprotocol serial controllers).
+
+   Required properties:
+     - compatible : "marvell,mv64360-brg"
+     - reg : Offset and length of the register set for this device
+     - clock-src : A value from 0 to 15 which selects the clock
+       source for the baud rate generator.  This value corresponds
+       to the CLKS value in the BRGx configuration register.  See
+       the mv64x60 User's Manual.
+     - clock-frequence : The frequency (in Hz) of the baud rate
+       generator's input clock.
+     - current-speed : The current speed setting (presumably by
+       firmware) of the baud rate generator.
+
+   Example Discovery BRG node:
+     brg@b200 {
+	     compatible = "marvell,mv64360-brg";
+	     reg = <0xb200 0x8>;
+	     clock-src = <8>;
+	     clock-frequency = <133333333>;
+	     current-speed = <9600>;
+     };
+
+
+   f) Marvell Discovery CUNIT nodes
+
+   Represent the Serial Communications Unit device hardware.
+
+   Required properties:
+     - reg : Offset and length of the register set for this device
+
+   Example Discovery CUNIT node:
+     cunit@f200 {
+	     reg = <0xf200 0x200>;
+     };
+
+
+   g) Marvell Discovery MPSCROUTING nodes
+
+   Represent the Discovery's MPSC routing hardware
+
+   Required properties:
+     - reg : Offset and length of the register set for this device
+
+   Example Discovery CUNIT node:
+     mpscrouting@b500 {
+	     reg = <0xb400 0xc>;
+     };
+
+
+   h) Marvell Discovery MPSCINTR nodes
+
+   Represent the Discovery's MPSC DMA interrupt hardware registers
+   (SDMA cause and mask registers).
+
+   Required properties:
+     - reg : Offset and length of the register set for this device
+
+   Example Discovery MPSCINTR node:
+     mpsintr@b800 {
+	     reg = <0xb800 0x100>;
+     };
+
+
+   i) Marvell Discovery MPSC nodes
+
+   Represent the Discovery's MPSC (Multiprotocol Serial Controller)
+   serial port.
+
+   Required properties:
+     - device_type : "serial"
+     - compatible : "marvell,mv64360-mpsc"
+     - reg : Offset and length of the register set for this device
+     - sdma : the phandle for the SDMA node used by this port
+     - brg : the phandle for the BRG node used by this port
+     - cunit : the phandle for the CUNIT node used by this port
+     - mpscrouting : the phandle for the MPSCROUTING node used by this port
+     - mpscintr : the phandle for the MPSCINTR node used by this port
+     - cell-index : the hardware index of this cell in the MPSC core
+     - max_idle : value needed for MPSC CHR3 (Maximum Frame Length)
+       register
+     - interrupts : <a> where a is the interrupt number for the MPSC.
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery MPSCINTR node:
+     mpsc@8000 {
+	     device_type = "serial";
+	     compatible = "marvell,mv64360-mpsc";
+	     reg = <0x8000 0x38>;
+	     virtual-reg = <0xf1008000>;
+	     sdma = <&SDMA0>;
+	     brg = <&BRG0>;
+	     cunit = <&CUNIT>;
+	     mpscrouting = <&MPSCROUTING>;
+	     mpscintr = <&MPSCINTR>;
+	     cell-index = <0>;
+	     max_idle = <40>;
+	     interrupts = <40>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
+   j) Marvell Discovery Watch Dog Timer nodes
+
+   Represent the Discovery's watchdog timer hardware
+
+   Required properties:
+     - compatible : "marvell,mv64360-wdt"
+     - reg : Offset and length of the register set for this device
+
+   Example Discovery Watch Dog Timer node:
+     wdt@b410 {
+	     compatible = "marvell,mv64360-wdt";
+	     reg = <0xb410 0x8>;
+     };
+
+
+   k) Marvell Discovery I2C nodes
+
+   Represent the Discovery's I2C hardware
+
+   Required properties:
+     - device_type : "i2c"
+     - compatible : "marvell,mv64360-i2c"
+     - reg : Offset and length of the register set for this device
+     - interrupts : <a> where a is the interrupt number for the I2C.
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery I2C node:
+	     compatible = "marvell,mv64360-i2c";
+	     reg = <0xc000 0x20>;
+	     virtual-reg = <0xf100c000>;
+	     interrupts = <37>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
+   l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
+
+   Represent the Discovery's PIC hardware
+
+   Required properties:
+     - #interrupt-cells : <1>
+     - #address-cells : <0>
+     - compatible : "marvell,mv64360-pic"
+     - reg : Offset and length of the register set for this device
+     - interrupt-controller
+
+   Example Discovery PIC node:
+     pic {
+	     #interrupt-cells = <1>;
+	     #address-cells = <0>;
+	     compatible = "marvell,mv64360-pic";
+	     reg = <0x0 0x88>;
+	     interrupt-controller;
+     };
+
+
+   m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
+
+   Represent the Discovery's MPP hardware
+
+   Required properties:
+     - compatible : "marvell,mv64360-mpp"
+     - reg : Offset and length of the register set for this device
+
+   Example Discovery MPP node:
+     mpp@f000 {
+	     compatible = "marvell,mv64360-mpp";
+	     reg = <0xf000 0x10>;
+     };
+
+
+   n) Marvell Discovery GPP (General Purpose Pins) nodes
+
+   Represent the Discovery's GPP hardware
+
+   Required properties:
+     - compatible : "marvell,mv64360-gpp"
+     - reg : Offset and length of the register set for this device
+
+   Example Discovery GPP node:
+     gpp@f000 {
+	     compatible = "marvell,mv64360-gpp";
+	     reg = <0xf100 0x20>;
+     };
+
+
+   o) Marvell Discovery PCI host bridge node
+
+   Represents the Discovery's PCI host bridge device.  The properties
+   for this node conform to Rev 2.1 of the PCI Bus Binding to IEEE
+   1275-1994.  A typical value for the compatible property is
+   "marvell,mv64360-pci".
+
+   Example Discovery PCI host bridge node
+     pci@80000000 {
+	     #address-cells = <3>;
+	     #size-cells = <2>;
+	     #interrupt-cells = <1>;
+	     device_type = "pci";
+	     compatible = "marvell,mv64360-pci";
+	     reg = <0xcf8 0x8>;
+	     ranges = <0x01000000 0x0        0x0
+			     0x88000000 0x0 0x01000000
+		       0x02000000 0x0 0x80000000
+			     0x80000000 0x0 0x08000000>;
+	     bus-range = <0 255>;
+	     clock-frequency = <66000000>;
+	     interrupt-parent = <&PIC>;
+	     interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+	     interrupt-map = <
+		     /* IDSEL 0x0a */
+		     0x5000 0 0 1 &PIC 80
+		     0x5000 0 0 2 &PIC 81
+		     0x5000 0 0 3 &PIC 91
+		     0x5000 0 0 4 &PIC 93
+
+		     /* IDSEL 0x0b */
+		     0x5800 0 0 1 &PIC 91
+		     0x5800 0 0 2 &PIC 93
+		     0x5800 0 0 3 &PIC 80
+		     0x5800 0 0 4 &PIC 81
+
+		     /* IDSEL 0x0c */
+		     0x6000 0 0 1 &PIC 91
+		     0x6000 0 0 2 &PIC 93
+		     0x6000 0 0 3 &PIC 80
+		     0x6000 0 0 4 &PIC 81
+
+		     /* IDSEL 0x0d */
+		     0x6800 0 0 1 &PIC 93
+		     0x6800 0 0 2 &PIC 80
+		     0x6800 0 0 3 &PIC 81
+		     0x6800 0 0 4 &PIC 91
+	     >;
+     };
+
+
+   p) Marvell Discovery CPU Error nodes
+
+   Represent the Discovery's CPU error handler device.
+
+   Required properties:
+     - compatible : "marvell,mv64360-cpu-error"
+     - reg : Offset and length of the register set for this device
+     - interrupts : the interrupt number for this device
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery CPU Error node:
+     cpu-error@0070 {
+	     compatible = "marvell,mv64360-cpu-error";
+	     reg = <0x70 0x10 0x128 0x28>;
+	     interrupts = <3>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
+   q) Marvell Discovery SRAM Controller nodes
+
+   Represent the Discovery's SRAM controller device.
+
+   Required properties:
+     - compatible : "marvell,mv64360-sram-ctrl"
+     - reg : Offset and length of the register set for this device
+     - interrupts : the interrupt number for this device
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery SRAM Controller node:
+     sram-ctrl@0380 {
+	     compatible = "marvell,mv64360-sram-ctrl";
+	     reg = <0x380 0x80>;
+	     interrupts = <13>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
+   r) Marvell Discovery PCI Error Handler nodes
+
+   Represent the Discovery's PCI error handler device.
+
+   Required properties:
+     - compatible : "marvell,mv64360-pci-error"
+     - reg : Offset and length of the register set for this device
+     - interrupts : the interrupt number for this device
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery PCI Error Handler node:
+     pci-error@1d40 {
+	     compatible = "marvell,mv64360-pci-error";
+	     reg = <0x1d40 0x40 0xc28 0x4>;
+	     interrupts = <12>;
+	     interrupt-parent = <&PIC>;
+     };
+
+
+   s) Marvell Discovery Memory Controller nodes
+
+   Represent the Discovery's memory controller device.
+
+   Required properties:
+     - compatible : "marvell,mv64360-mem-ctrl"
+     - reg : Offset and length of the register set for this device
+     - interrupts : the interrupt number for this device
+     - interrupt-parent : the phandle for the interrupt controller
+       that services interrupts for this device.
+
+   Example Discovery Memory Controller node:
+     mem-ctrl@1400 {
+	     compatible = "marvell,mv64360-mem-ctrl";
+	     reg = <0x1400 0x60>;
+	     interrupts = <17>;
+	     interrupt-parent = <&PIC>;
+     };
+
+

Documentation/powerpc/dts-bindings/phy.txt

@@ -0,0 +1,25 @@
+PHY nodes
+
+Required properties:
+
+ - device_type : Should be "ethernet-phy"
+ - interrupts : <a b> where a is the interrupt number and b is a
+   field that represents an encoding of the sense and level
+   information for the interrupt.  This should be encoded based on
+   the information in section 2) depending on the type of interrupt
+   controller you have.
+ - interrupt-parent : the phandle for the interrupt controller that
+   services interrupts for this device.
+ - reg : The ID number for the phy, usually a small integer
+ - linux,phandle :  phandle for this node; likely referenced by an
+   ethernet controller node.
+
+Example:
+
+ethernet-phy@0 {
+	linux,phandle = <2452000>
+	interrupt-parent = <40000>;
+	interrupts = <35 1>;
+	reg = <0>;
+	device_type = "ethernet-phy";
+};

Documentation/powerpc/dts-bindings/spi-bus.txt

@@ -0,0 +1,57 @@
+SPI (Serial Peripheral Interface) busses
+
+SPI busses can be described with a node for the SPI master device
+and a set of child nodes for each SPI slave on the bus.  For this
+discussion, it is assumed that the system's SPI controller is in
+SPI master mode.  This binding does not describe SPI controllers
+in slave mode.
+
+The SPI master node requires the following properties:
+- #address-cells  - number of cells required to define a chip select
+    		address on the SPI bus.
+- #size-cells     - should be zero.
+- compatible      - name of SPI bus controller following generic names
+    		recommended practice.
+No other properties are required in the SPI bus node.  It is assumed
+that a driver for an SPI bus device will understand that it is an SPI bus.
+However, the binding does not attempt to define the specific method for
+assigning chip select numbers.  Since SPI chip select configuration is
+flexible and non-standardized, it is left out of this binding with the
+assumption that board specific platform code will be used to manage
+chip selects.  Individual drivers can define additional properties to
+support describing the chip select layout.
+
+SPI slave nodes must be children of the SPI master node and can
+contain the following properties.
+- reg             - (required) chip select address of device.
+- compatible      - (required) name of SPI device following generic names
+    		recommended practice
+- spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz
+- spi-cpol        - (optional) Empty property indicating device requires
+    		inverse clock polarity (CPOL) mode
+- spi-cpha        - (optional) Empty property indicating device requires
+    		shifted clock phase (CPHA) mode
+- spi-cs-high     - (optional) Empty property indicating device requires
+    		chip select active high
+
+SPI example for an MPC5200 SPI bus:
+	spi@f00 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
+		reg = <0xf00 0x20>;
+		interrupts = <2 13 0 2 14 0>;
+		interrupt-parent = <&mpc5200_pic>;
+
+		ethernet-switch@0 {
+			compatible = "micrel,ks8995m";
+			spi-max-frequency = <1000000>;
+			reg = <0>;
+		};
+
+		codec@1 {
+			compatible = "ti,tlv320aic26";
+			spi-max-frequency = <100000>;
+			reg = <1>;
+		};
+	};

Documentation/powerpc/dts-bindings/usb-ehci.txt

@@ -0,0 +1,25 @@
+USB EHCI controllers
+
+Required properties:
+  - compatible : should be "usb-ehci".
+  - reg : should contain at least address and length of the standard EHCI
+    register set for the device. Optional platform-dependent registers
+    (debug-port or other) can be also specified here, but only after
+    definition of standard EHCI registers.
+  - interrupts : one EHCI interrupt should be described here.
+If device registers are implemented in big endian mode, the device
+node should have "big-endian-regs" property.
+If controller implementation operates with big endian descriptors,
+"big-endian-desc" property should be specified.
+If both big endian registers and descriptors are used by the controller
+implementation, "big-endian" property can be specified instead of having
+both "big-endian-regs" and "big-endian-desc".
+
+Example (Sequoia 440EPx):
+    ehci@e0000300 {
+	   compatible = "ibm,usb-ehci-440epx", "usb-ehci";
+	   interrupt-parent = <&UIC0>;
+	   interrupts = <1a 4>;
+	   reg = <0 e0000300 90 0 e0000390 70>;
+	   big-endian;
+   };

Documentation/powerpc/dts-bindings/xilinx.txt

@@ -0,0 +1,295 @@
+   d) Xilinx IP cores
+
+   The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
+   in Xilinx Spartan and Virtex FPGAs.  The devices cover the whole range
+   of standard device types (network, serial, etc.) and miscellaneous
+   devices (gpio, LCD, spi, etc).  Also, since these devices are
+   implemented within the fpga fabric every instance of the device can be
+   synthesised with different options that change the behaviour.
+
+   Each IP-core has a set of parameters which the FPGA designer can use to
+   control how the core is synthesized.  Historically, the EDK tool would
+   extract the device parameters relevant to device drivers and copy them
+   into an 'xparameters.h' in the form of #define symbols.  This tells the
+   device drivers how the IP cores are configured, but it requres the kernel
+   to be recompiled every time the FPGA bitstream is resynthesized.
+
+   The new approach is to export the parameters into the device tree and
+   generate a new device tree each time the FPGA bitstream changes.  The
+   parameters which used to be exported as #defines will now become
+   properties of the device node.  In general, device nodes for IP-cores
+   will take the following form:
+
+	(name): (generic-name)@(base-address) {
+		compatible = "xlnx,(ip-core-name)-(HW_VER)"
+			     [, (list of compatible devices), ...];
+		reg = <(baseaddr) (size)>;
+		interrupt-parent = <&interrupt-controller-phandle>;
+		interrupts = < ... >;
+		xlnx,(parameter1) = "(string-value)";
+		xlnx,(parameter2) = <(int-value)>;
+	};
+
+	(generic-name):   an open firmware-style name that describes the
+			generic class of device.  Preferably, this is one word, such
+			as 'serial' or 'ethernet'.
+	(ip-core-name):	the name of the ip block (given after the BEGIN
+			directive in system.mhs).  Should be in lowercase
+			and all underscores '_' converted to dashes '-'.
+	(name):		is derived from the "PARAMETER INSTANCE" value.
+	(parameter#):	C_* parameters from system.mhs.  The C_ prefix is
+			dropped from the parameter name, the name is converted
+			to lowercase and all underscore '_' characters are
+			converted to dashes '-'.
+	(baseaddr):	the baseaddr parameter value (often named C_BASEADDR).
+	(HW_VER):	from the HW_VER parameter.
+	(size):		the address range size (often C_HIGHADDR - C_BASEADDR + 1).
+
+   Typically, the compatible list will include the exact IP core version
+   followed by an older IP core version which implements the same
+   interface or any other device with the same interface.
+
+   'reg', 'interrupt-parent' and 'interrupts' are all optional properties.
+
+   For example, the following block from system.mhs:
+
+	BEGIN opb_uartlite
+		PARAMETER INSTANCE = opb_uartlite_0
+		PARAMETER HW_VER = 1.00.b
+		PARAMETER C_BAUDRATE = 115200
+		PARAMETER C_DATA_BITS = 8
+		PARAMETER C_ODD_PARITY = 0
+		PARAMETER C_USE_PARITY = 0
+		PARAMETER C_CLK_FREQ = 50000000
+		PARAMETER C_BASEADDR = 0xEC100000
+		PARAMETER C_HIGHADDR = 0xEC10FFFF
+		BUS_INTERFACE SOPB = opb_7
+		PORT OPB_Clk = CLK_50MHz
+		PORT Interrupt = opb_uartlite_0_Interrupt
+		PORT RX = opb_uartlite_0_RX
+		PORT TX = opb_uartlite_0_TX
+		PORT OPB_Rst = sys_bus_reset_0
+	END
+
+   becomes the following device tree node:
+
+	opb_uartlite_0: serial@ec100000 {
+		device_type = "serial";
+		compatible = "xlnx,opb-uartlite-1.00.b";
+		reg = <ec100000 10000>;
+		interrupt-parent = <&opb_intc_0>;
+		interrupts = <1 0>; // got this from the opb_intc parameters
+		current-speed = <d#115200>;	// standard serial device prop
+		clock-frequency = <d#50000000>;	// standard serial device prop
+		xlnx,data-bits = <8>;
+		xlnx,odd-parity = <0>;
+		xlnx,use-parity = <0>;
+	};
+
+   Some IP cores actually implement 2 or more logical devices.  In
+   this case, the device should still describe the whole IP core with
+   a single node and add a child node for each logical device.  The
+   ranges property can be used to translate from parent IP-core to the
+   registers of each device.  In addition, the parent node should be
+   compatible with the bus type 'xlnx,compound', and should contain
+   #address-cells and #size-cells, as with any other bus.  (Note: this
+   makes the assumption that both logical devices have the same bus
+   binding.  If this is not true, then separate nodes should be used
+   for each logical device).  The 'cell-index' property can be used to
+   enumerate logical devices within an IP core.  For example, the
+   following is the system.mhs entry for the dual ps2 controller found
+   on the ml403 reference design.
+
+	BEGIN opb_ps2_dual_ref
+		PARAMETER INSTANCE = opb_ps2_dual_ref_0
+		PARAMETER HW_VER = 1.00.a
+		PARAMETER C_BASEADDR = 0xA9000000
+		PARAMETER C_HIGHADDR = 0xA9001FFF
+		BUS_INTERFACE SOPB = opb_v20_0
+		PORT Sys_Intr1 = ps2_1_intr
+		PORT Sys_Intr2 = ps2_2_intr
+		PORT Clkin1 = ps2_clk_rx_1
+		PORT Clkin2 = ps2_clk_rx_2
+		PORT Clkpd1 = ps2_clk_tx_1
+		PORT Clkpd2 = ps2_clk_tx_2
+		PORT Rx1 = ps2_d_rx_1
+		PORT Rx2 = ps2_d_rx_2
+		PORT Txpd1 = ps2_d_tx_1
+		PORT Txpd2 = ps2_d_tx_2
+	END
+
+   It would result in the following device tree nodes:
+
+	opb_ps2_dual_ref_0: opb-ps2-dual-ref@a9000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "xlnx,compound";
+		ranges = <0 a9000000 2000>;
+		// If this device had extra parameters, then they would
+		// go here.
+		ps2@0 {
+			compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
+			reg = <0 40>;
+			interrupt-parent = <&opb_intc_0>;
+			interrupts = <3 0>;
+			cell-index = <0>;
+		};
+		ps2@1000 {
+			compatible = "xlnx,opb-ps2-dual-ref-1.00.a";
+			reg = <1000 40>;
+			interrupt-parent = <&opb_intc_0>;
+			interrupts = <3 0>;
+			cell-index = <0>;
+		};
+	};
+
+   Also, the system.mhs file defines bus attachments from the processor
+   to the devices.  The device tree structure should reflect the bus
+   attachments.  Again an example; this system.mhs fragment:
+
+	BEGIN ppc405_virtex4
+		PARAMETER INSTANCE = ppc405_0
+		PARAMETER HW_VER = 1.01.a
+		BUS_INTERFACE DPLB = plb_v34_0
+		BUS_INTERFACE IPLB = plb_v34_0
+	END
+
+	BEGIN opb_intc
+		PARAMETER INSTANCE = opb_intc_0
+		PARAMETER HW_VER = 1.00.c
+		PARAMETER C_BASEADDR = 0xD1000FC0
+		PARAMETER C_HIGHADDR = 0xD1000FDF
+		BUS_INTERFACE SOPB = opb_v20_0
+	END
+
+	BEGIN opb_uart16550
+		PARAMETER INSTANCE = opb_uart16550_0
+		PARAMETER HW_VER = 1.00.d
+		PARAMETER C_BASEADDR = 0xa0000000
+		PARAMETER C_HIGHADDR = 0xa0001FFF
+		BUS_INTERFACE SOPB = opb_v20_0
+	END
+
+	BEGIN plb_v34
+		PARAMETER INSTANCE = plb_v34_0
+		PARAMETER HW_VER = 1.02.a
+	END
+
+	BEGIN plb_bram_if_cntlr
+		PARAMETER INSTANCE = plb_bram_if_cntlr_0
+		PARAMETER HW_VER = 1.00.b
+		PARAMETER C_BASEADDR = 0xFFFF0000
+		PARAMETER C_HIGHADDR = 0xFFFFFFFF
+		BUS_INTERFACE SPLB = plb_v34_0
+	END
+
+	BEGIN plb2opb_bridge
+		PARAMETER INSTANCE = plb2opb_bridge_0
+		PARAMETER HW_VER = 1.01.a
+		PARAMETER C_RNG0_BASEADDR = 0x20000000
+		PARAMETER C_RNG0_HIGHADDR = 0x3FFFFFFF
+		PARAMETER C_RNG1_BASEADDR = 0x60000000
+		PARAMETER C_RNG1_HIGHADDR = 0x7FFFFFFF
+		PARAMETER C_RNG2_BASEADDR = 0x80000000
+		PARAMETER C_RNG2_HIGHADDR = 0xBFFFFFFF
+		PARAMETER C_RNG3_BASEADDR = 0xC0000000
+		PARAMETER C_RNG3_HIGHADDR = 0xDFFFFFFF
+		BUS_INTERFACE SPLB = plb_v34_0
+		BUS_INTERFACE MOPB = opb_v20_0
+	END
+
+   Gives this device tree (some properties removed for clarity):
+
+	plb@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "xlnx,plb-v34-1.02.a";
+		device_type = "ibm,plb";
+		ranges; // 1:1 translation
+
+		plb_bram_if_cntrl_0: bram@ffff0000 {
+			reg = <ffff0000 10000>;
+		}
+
+		opb@20000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <20000000 20000000 20000000
+				  60000000 60000000 20000000
+				  80000000 80000000 40000000
+				  c0000000 c0000000 20000000>;
+
+			opb_uart16550_0: serial@a0000000 {
+				reg = <a00000000 2000>;
+			};
+
+			opb_intc_0: interrupt-controller@d1000fc0 {
+				reg = <d1000fc0 20>;
+			};
+		};
+	};
+
+   That covers the general approach to binding xilinx IP cores into the
+   device tree.  The following are bindings for specific devices:
+
+      i) Xilinx ML300 Framebuffer
+
+      Simple framebuffer device from the ML300 reference design (also on the
+      ML403 reference design as well as others).
+
+      Optional properties:
+       - resolution = <xres yres> : pixel resolution of framebuffer.  Some
+                                    implementations use a different resolution.
+                                    Default is <d#640 d#480>
+       - virt-resolution = <xvirt yvirt> : Size of framebuffer in memory.
+                                           Default is <d#1024 d#480>.
+       - rotate-display (empty) : rotate display 180 degrees.
+
+      ii) Xilinx SystemACE
+
+      The Xilinx SystemACE device is used to program FPGAs from an FPGA
+      bitstream stored on a CF card.  It can also be used as a generic CF
+      interface device.
+
+      Optional properties:
+       - 8-bit (empty) : Set this property for SystemACE in 8 bit mode
+
+      iii) Xilinx EMAC and Xilinx TEMAC
+
+      Xilinx Ethernet devices.  In addition to general xilinx properties
+      listed above, nodes for these devices should include a phy-handle
+      property, and may include other common network device properties
+      like local-mac-address.
+
+      iv) Xilinx Uartlite
+
+      Xilinx uartlite devices are simple fixed speed serial ports.
+
+      Required properties:
+       - current-speed : Baud rate of uartlite
+
+      v) Xilinx hwicap
+
+		Xilinx hwicap devices provide access to the configuration logic
+		of the FPGA through the Internal Configuration Access Port
+		(ICAP).  The ICAP enables partial reconfiguration of the FPGA,
+		readback of the configuration information, and some control over
+		'warm boots' of the FPGA fabric.
+
+		Required properties:
+		- xlnx,family : The family of the FPGA, necessary since the
+                      capabilities of the underlying ICAP hardware
+                      differ between different families.  May be
+                      'virtex2p', 'virtex4', or 'virtex5'.
+
+      vi) Xilinx Uart 16550
+
+      Xilinx UART 16550 devices are very similar to the NS16550 but with
+      different register spacing and an offset from the base address.
+
+      Required properties:
+       - clock-frequency : Frequency of the clock input
+       - reg-offset : A value of 3 is required
+       - reg-shift : A value of 2 is required
+
+

Documentation/scheduler/sched-rt-group.txt

@@ -73,7 +73,7 @@ The remaining CPU time will be used for user input and other tasks. Because
 realtime tasks have explicitly allocated the CPU time they need to perform
 their tasks, buffer underruns in the graphics or audio can be eliminated.
 
-NOTE: the above example is not fully implemented as of yet (2.6.25). We still
+NOTE: the above example is not fully implemented yet. We still
 lack an EDF scheduler to make non-uniform periods usable.
 
 
@@ -140,14 +140,15 @@ The other option is:
 
 .o CONFIG_CGROUP_SCHED (aka "Basis for grouping tasks" = "Control groups")
 
-This uses the /cgroup virtual file system and "/cgroup/<cgroup>/cpu.rt_runtime_us"
-to control the CPU time reserved for each control group instead.
+This uses the /cgroup virtual file system and
+"/cgroup/<cgroup>/cpu.rt_runtime_us" to control the CPU time reserved for each
+control group instead.
 
 For more information on working with control groups, you should read
 Documentation/cgroups/cgroups.txt as well.
 
-Group settings are checked against the following limits in order to keep the configuration
-schedulable:
+Group settings are checked against the following limits in order to keep the
+configuration schedulable:
 
    \Sum_{i} runtime_{i} / global_period <= global_runtime / global_period
 
@@ -189,7 +190,7 @@ Implementing SCHED_EDF might take a while to complete. Priority Inheritance is
 the biggest challenge as the current linux PI infrastructure is geared towards
 the limited static priority levels 0-99. With deadline scheduling you need to
 do deadline inheritance (since priority is inversely proportional to the
-deadline delta (deadline - now).
+deadline delta (deadline - now)).
 
 This means the whole PI machinery will have to be reworked - and that is one of
 the most complex pieces of code we have.

Documentation/sound/alsa/HD-Audio-Models.txt

@@ -240,6 +240,7 @@ AD1986A
   laptop-automute 2-channel with EAPD and HP-automute (Lenovo N100)
   ultra		2-channel with EAPD (Samsung Ultra tablet PC)
   samsung	2-channel with EAPD (Samsung R65)
+  samsung-p50	2-channel with HP-automute (Samsung P50)
 
 AD1988/AD1988B/AD1989A/AD1989B
 ==============================

Documentation/sound/alsa/Procfile.txt

@@ -101,6 +101,8 @@ card*/pcm*/xrun_debug
 	  bit 0 = Enable XRUN/jiffies debug messages
 	  bit 1 = Show stack trace at XRUN / jiffies check
 	  bit 2 = Enable additional jiffies check
+	  bit 3 = Log hwptr update at each period interrupt
+	  bit 4 = Log hwptr update at each snd_pcm_update_hw_ptr()
 
 	When the bit 0 is set, the driver will show the messages to
 	kernel log when an xrun is detected.  The debug message is
@@ -117,6 +119,9 @@ card*/pcm*/xrun_debug
 	buggy) hardware that doesn't give smooth pointer updates.
 	This feature is enabled via the bit 2.
 
+	Bits 3 and 4 are for logging the hwptr records.  Note that
+	these will give flood of kernel messages.
+
 card*/pcm*/sub*/info
 	The general information of this PCM sub-stream.
 

Documentation/spi/spidev_test.c

@@ -99,11 +99,13 @@ void parse_opts(int argc, char *argv[])
 			{ "lsb",     0, 0, 'L' },
 			{ "cs-high", 0, 0, 'C' },
 			{ "3wire",   0, 0, '3' },
+			{ "no-cs",   0, 0, 'N' },
+			{ "ready",   0, 0, 'R' },
 			{ NULL, 0, 0, 0 },
 		};
 		int c;
 
-		c = getopt_long(argc, argv, "D:s:d:b:lHOLC3", lopts, NULL);
+		c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR", lopts, NULL);
 
 		if (c == -1)
 			break;
@@ -139,6 +141,12 @@ void parse_opts(int argc, char *argv[])
 		case '3':
 			mode |= SPI_3WIRE;
 			break;
+		case 'N':
+			mode |= SPI_NO_CS;
+			break;
+		case 'R':
+			mode |= SPI_READY;
+			break;
 		default:
 			print_usage(argv[0]);
 			break;

Documentation/sysrq.txt

@@ -66,7 +66,8 @@ On all -  write a character to /proc/sysrq-trigger.  e.g.:
 'b'     - Will immediately reboot the system without syncing or unmounting
           your disks.
 
-'c'	- Will perform a kexec reboot in order to take a crashdump.
+'c'	- Will perform a system crash by a NULL pointer dereference.
+          A crashdump will be taken if configured.
 
 'd'	- Shows all locks that are held.
 
@@ -141,8 +142,8 @@ useful when you want to exit a program that will not let you switch consoles.
 re'B'oot is good when you're unable to shut down. But you should also 'S'ync
 and 'U'mount first.
 
-'C'rashdump can be used to manually trigger a crashdump when the system is hung.
-The kernel needs to have been built with CONFIG_KEXEC enabled.
+'C'rash can be used to manually trigger a crashdump when the system is hung.
+Note that this just triggers a crash if there is no dump mechanism available.
 
 'S'ync is great when your system is locked up, it allows you to sync your
 disks and will certainly lessen the chance of data loss and fscking. Note

Documentation/video4linux/CARDLIST.em28xx

@@ -20,7 +20,7 @@
  19 -> EM2860/SAA711X Reference Design          (em2860)
  20 -> AMD ATI TV Wonder HD 600                 (em2880)        [0438:b002]
  21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder (em2800)        [eb1a:2801]
- 22 -> Unknown EM2750/EM2751 webcam grabber     (em2750)        [eb1a:2750,eb1a:2751]
+ 22 -> EM2710/EM2750/EM2751 webcam grabber      (em2750)        [eb1a:2750,eb1a:2751]
  23 -> Huaqi DLCW-130                           (em2750)
  24 -> D-Link DUB-T210 TV Tuner                 (em2820/em2840) [2001:f112]
  25 -> Gadmei UTV310                            (em2820/em2840)
@@ -66,3 +66,4 @@
  68 -> Terratec AV350                           (em2860)        [0ccd:0084]
  69 -> KWorld ATSC 315U HDTV TV Box             (em2882)        [eb1a:a313]
  70 -> Evga inDtube                             (em2882)
+ 71 -> Silvercrest Webcam 1.3mpix               (em2820/em2840)

Documentation/video4linux/gspca.txt

@@ -44,7 +44,9 @@ zc3xx		0458:7007	Genius VideoCam V2
 zc3xx		0458:700c	Genius VideoCam V3
 zc3xx		0458:700f	Genius VideoCam Web V2
 sonixj		0458:7025	Genius Eye 311Q
+sn9c20x		0458:7029	Genius Look 320s
 sonixj		0458:702e	Genius Slim 310 NB
+sn9c20x		045e:00f4	LifeCam VX-6000 (SN9C20x + OV9650)
 sonixj		045e:00f5	MicroSoft VX3000
 sonixj		045e:00f7	MicroSoft VX1000
 ov519		045e:028c	Micro$oft xbox cam
@@ -282,6 +284,28 @@ sonixj		0c45:613a	Microdia Sonix PC Camera
 sonixj		0c45:613b	Surfer SN-206
 sonixj		0c45:613c	Sonix Pccam168
 sonixj		0c45:6143	Sonix Pccam168
+sn9c20x		0c45:6240	PC Camera (SN9C201 + MT9M001)
+sn9c20x		0c45:6242	PC Camera (SN9C201 + MT9M111)
+sn9c20x		0c45:6248	PC Camera (SN9C201 + OV9655)
+sn9c20x		0c45:624e	PC Camera (SN9C201 + SOI968)
+sn9c20x		0c45:624f	PC Camera (SN9C201 + OV9650)
+sn9c20x		0c45:6251	PC Camera (SN9C201 + OV9650)
+sn9c20x		0c45:6253	PC Camera (SN9C201 + OV9650)
+sn9c20x		0c45:6260	PC Camera (SN9C201 + OV7670)
+sn9c20x		0c45:6270	PC Camera (SN9C201 + MT9V011/MT9V111/MT9V112)
+sn9c20x		0c45:627b	PC Camera (SN9C201 + OV7660)
+sn9c20x		0c45:627c	PC Camera (SN9C201 + HV7131R)
+sn9c20x		0c45:627f	PC Camera (SN9C201 + OV9650)
+sn9c20x		0c45:6280	PC Camera (SN9C202 + MT9M001)
+sn9c20x		0c45:6282	PC Camera (SN9C202 + MT9M111)
+sn9c20x		0c45:6288	PC Camera (SN9C202 + OV9655)
+sn9c20x		0c45:628e	PC Camera (SN9C202 + SOI968)
+sn9c20x		0c45:628f	PC Camera (SN9C202 + OV9650)
+sn9c20x		0c45:62a0	PC Camera (SN9C202 + OV7670)
+sn9c20x		0c45:62b0	PC Camera (SN9C202 + MT9V011/MT9V111/MT9V112)
+sn9c20x		0c45:62b3	PC Camera (SN9C202 + OV9655)
+sn9c20x		0c45:62bb	PC Camera (SN9C202 + OV7660)
+sn9c20x		0c45:62bc	PC Camera (SN9C202 + HV7131R)
 sunplus		0d64:0303	Sunplus FashionCam DXG
 etoms		102c:6151	Qcam Sangha CIF
 etoms		102c:6251	Qcam xxxxxx VGA
@@ -290,6 +314,7 @@ spca561		10fd:7e50	FlyCam Usb 100
 zc3xx		10fd:8050	Typhoon Webshot II USB 300k
 ov534		1415:2000	Sony HD Eye for PS3 (SLEH 00201)
 pac207		145f:013a	Trust WB-1300N
+sn9c20x		145f:013d	Trust WB-3600R
 vc032x		15b8:6001	HP 2.0 Megapixel
 vc032x		15b8:6002	HP 2.0 Megapixel rz406aa
 spca501		1776:501c	Arowana 300K CMOS Camera
@@ -300,4 +325,11 @@ spca500		2899:012c	Toptro Industrial
 spca508		8086:0110	Intel Easy PC Camera
 spca500		8086:0630	Intel Pocket PC Camera
 spca506		99fa:8988	Grandtec V.cap
+sn9c20x		a168:0610	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x		a168:0611	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x		a168:0613	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x		a168:0618	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x		a168:0614	Dino-Lite Digital Microscope (SN9C201 + MT9M111)
+sn9c20x		a168:0615	Dino-Lite Digital Microscope (SN9C201 + MT9M111)
+sn9c20x		a168:0617	Dino-Lite Digital Microscope (SN9C201 + MT9M111)
 spca561		abcd:cdee	Petcam

Documentation/x86/00-INDEX

@@ -2,3 +2,5 @@
 	- this file
 mtrr.txt
 	- how to use x86 Memory Type Range Registers to increase performance
+exception-tables.txt
+	- why and how Linux kernel uses exception tables on x86

Documentation/exception.txt → Documentation/x86/exception-tables.txt

@@ -1,123 +1,123 @@
-     Kernel level exception handling in Linux 2.1.8
+     Kernel level exception handling in Linux
   Commentary by Joerg Pommnitz <joerg@raleigh.ibm.com>
 
-When a process runs in kernel mode, it often has to access user 
-mode memory whose address has been passed by an untrusted program. 
+When a process runs in kernel mode, it often has to access user
+mode memory whose address has been passed by an untrusted program.
 To protect itself the kernel has to verify this address.
 
-In older versions of Linux this was done with the 
-int verify_area(int type, const void * addr, unsigned long size) 
+In older versions of Linux this was done with the
+int verify_area(int type, const void * addr, unsigned long size)
 function (which has since been replaced by access_ok()).
 
-This function verified that the memory area starting at address 
+This function verified that the memory area starting at address
 'addr' and of size 'size' was accessible for the operation specified
-in type (read or write). To do this, verify_read had to look up the 
-virtual memory area (vma) that contained the address addr. In the 
-normal case (correctly working program), this test was successful. 
+in type (read or write). To do this, verify_read had to look up the
+virtual memory area (vma) that contained the address addr. In the
+normal case (correctly working program), this test was successful.
 It only failed for a few buggy programs. In some kernel profiling
 tests, this normally unneeded verification used up a considerable
 amount of time.
 
-To overcome this situation, Linus decided to let the virtual memory 
+To overcome this situation, Linus decided to let the virtual memory
 hardware present in every Linux-capable CPU handle this test.
 
 How does this work?
 
-Whenever the kernel tries to access an address that is currently not 
-accessible, the CPU generates a page fault exception and calls the 
-page fault handler 
+Whenever the kernel tries to access an address that is currently not
+accessible, the CPU generates a page fault exception and calls the
+page fault handler
 
 void do_page_fault(struct pt_regs *regs, unsigned long error_code)
 
-in arch/i386/mm/fault.c. The parameters on the stack are set up by 
-the low level assembly glue in arch/i386/kernel/entry.S. The parameter
-regs is a pointer to the saved registers on the stack, error_code 
+in arch/x86/mm/fault.c. The parameters on the stack are set up by
+the low level assembly glue in arch/x86/kernel/entry_32.S. The parameter
+regs is a pointer to the saved registers on the stack, error_code
 contains a reason code for the exception.
 
-do_page_fault first obtains the unaccessible address from the CPU 
-control register CR2. If the address is within the virtual address 
-space of the process, the fault probably occurred, because the page 
-was not swapped in, write protected or something similar. However, 
-we are interested in the other case: the address is not valid, there 
-is no vma that contains this address. In this case, the kernel jumps 
-to the bad_area label. 
-
-There it uses the address of the instruction that caused the exception 
-(i.e. regs->eip) to find an address where the execution can continue 
-(fixup). If this search is successful, the fault handler modifies the 
-return address (again regs->eip) and returns. The execution will 
+do_page_fault first obtains the unaccessible address from the CPU
+control register CR2. If the address is within the virtual address
+space of the process, the fault probably occurred, because the page
+was not swapped in, write protected or something similar. However,
+we are interested in the other case: the address is not valid, there
+is no vma that contains this address. In this case, the kernel jumps
+to the bad_area label.
+
+There it uses the address of the instruction that caused the exception
+(i.e. regs->eip) to find an address where the execution can continue
+(fixup). If this search is successful, the fault handler modifies the
+return address (again regs->eip) and returns. The execution will
 continue at the address in fixup.
 
 Where does fixup point to?
 
-Since we jump to the contents of fixup, fixup obviously points 
-to executable code. This code is hidden inside the user access macros. 
-I have picked the get_user macro defined in include/asm/uaccess.h as an
-example. The definition is somewhat hard to follow, so let's peek at 
+Since we jump to the contents of fixup, fixup obviously points
+to executable code. This code is hidden inside the user access macros.
+I have picked the get_user macro defined in arch/x86/include/asm/uaccess.h
+as an example. The definition is somewhat hard to follow, so let's peek at
 the code generated by the preprocessor and the compiler. I selected
-the get_user call in drivers/char/console.c for a detailed examination.
+the get_user call in drivers/char/sysrq.c for a detailed examination.
 
-The original code in console.c line 1405:
+The original code in sysrq.c line 587:
         get_user(c, buf);
 
 The preprocessor output (edited to become somewhat readable):
 
 (
-  {        
-    long __gu_err = - 14 , __gu_val = 0;        
-    const __typeof__(*( (  buf ) )) *__gu_addr = ((buf));        
-    if (((((0 + current_set[0])->tss.segment) == 0x18 )  || 
-       (((sizeof(*(buf))) <= 0xC0000000UL) && 
-       ((unsigned long)(__gu_addr ) <= 0xC0000000UL - (sizeof(*(buf)))))))        
+  {
+    long __gu_err = - 14 , __gu_val = 0;
+    const __typeof__(*( (  buf ) )) *__gu_addr = ((buf));
+    if (((((0 + current_set[0])->tss.segment) == 0x18 )  ||
+       (((sizeof(*(buf))) <= 0xC0000000UL) &&
+       ((unsigned long)(__gu_addr ) <= 0xC0000000UL - (sizeof(*(buf)))))))
       do {
-        __gu_err  = 0;        
-        switch ((sizeof(*(buf)))) {        
-          case 1: 
-            __asm__ __volatile__(        
-              "1:      mov" "b" " %2,%" "b" "1\n"        
-              "2:\n"        
-              ".section .fixup,\"ax\"\n"        
-              "3:      movl %3,%0\n"        
-              "        xor" "b" " %" "b" "1,%" "b" "1\n"        
-              "        jmp 2b\n"        
-              ".section __ex_table,\"a\"\n"        
-              "        .align 4\n"        
-              "        .long 1b,3b\n"        
+        __gu_err  = 0;
+        switch ((sizeof(*(buf)))) {
+          case 1:
+            __asm__ __volatile__(
+              "1:      mov" "b" " %2,%" "b" "1\n"
+              "2:\n"
+              ".section .fixup,\"ax\"\n"
+              "3:      movl %3,%0\n"
+              "        xor" "b" " %" "b" "1,%" "b" "1\n"
+              "        jmp 2b\n"
+              ".section __ex_table,\"a\"\n"
+              "        .align 4\n"
+              "        .long 1b,3b\n"
               ".text"        : "=r"(__gu_err), "=q" (__gu_val): "m"((*(struct __large_struct *)
-                            (   __gu_addr   )) ), "i"(- 14 ), "0"(  __gu_err  )) ; 
-              break;        
-          case 2: 
+                            (   __gu_addr   )) ), "i"(- 14 ), "0"(  __gu_err  )) ;
+              break;
+          case 2:
             __asm__ __volatile__(
-              "1:      mov" "w" " %2,%" "w" "1\n"        
-              "2:\n"        
-              ".section .fixup,\"ax\"\n"        
-              "3:      movl %3,%0\n"        
-              "        xor" "w" " %" "w" "1,%" "w" "1\n"        
-              "        jmp 2b\n"        
-              ".section __ex_table,\"a\"\n"        
-              "        .align 4\n"        
-              "        .long 1b,3b\n"        
+              "1:      mov" "w" " %2,%" "w" "1\n"
+              "2:\n"
+              ".section .fixup,\"ax\"\n"
+              "3:      movl %3,%0\n"
+              "        xor" "w" " %" "w" "1,%" "w" "1\n"
+              "        jmp 2b\n"
+              ".section __ex_table,\"a\"\n"
+              "        .align 4\n"
+              "        .long 1b,3b\n"
               ".text"        : "=r"(__gu_err), "=r" (__gu_val) : "m"((*(struct __large_struct *)
-                            (   __gu_addr   )) ), "i"(- 14 ), "0"(  __gu_err  )); 
-              break;        
-          case 4: 
-            __asm__ __volatile__(        
-              "1:      mov" "l" " %2,%" "" "1\n"        
-              "2:\n"        
-              ".section .fixup,\"ax\"\n"        
-              "3:      movl %3,%0\n"        
-              "        xor" "l" " %" "" "1,%" "" "1\n"        
-              "        jmp 2b\n"        
-              ".section __ex_table,\"a\"\n"        
-              "        .align 4\n"        "        .long 1b,3b\n"        
+                            (   __gu_addr   )) ), "i"(- 14 ), "0"(  __gu_err  ));
+              break;
+          case 4:
+            __asm__ __volatile__(
+              "1:      mov" "l" " %2,%" "" "1\n"
+              "2:\n"
+              ".section .fixup,\"ax\"\n"
+              "3:      movl %3,%0\n"
+              "        xor" "l" " %" "" "1,%" "" "1\n"
+              "        jmp 2b\n"
+              ".section __ex_table,\"a\"\n"
+              "        .align 4\n"        "        .long 1b,3b\n"
               ".text"        : "=r"(__gu_err), "=r" (__gu_val) : "m"((*(struct __large_struct *)
-                            (   __gu_addr   )) ), "i"(- 14 ), "0"(__gu_err)); 
-              break;        
-          default: 
-            (__gu_val) = __get_user_bad();        
-        }        
-      } while (0) ;        
-    ((c)) = (__typeof__(*((buf))))__gu_val;        
+                            (   __gu_addr   )) ), "i"(- 14 ), "0"(__gu_err));
+              break;
+          default:
+            (__gu_val) = __get_user_bad();
+        }
+      } while (0) ;
+    ((c)) = (__typeof__(*((buf))))__gu_val;
     __gu_err;
   }
 );
@@ -127,12 +127,12 @@ see what code gcc generates:
 
  >         xorl %edx,%edx
  >         movl current_set,%eax
- >         cmpl $24,788(%eax)        
- >         je .L1424        
+ >         cmpl $24,788(%eax)
+ >         je .L1424
  >         cmpl $-1073741825,64(%esp)
- >         ja .L1423                
+ >         ja .L1423
  > .L1424:
- >         movl %edx,%eax                        
+ >         movl %edx,%eax
  >         movl 64(%esp),%ebx
  > #APP
  > 1:      movb (%ebx),%dl                /* this is the actual user access */
@@ -149,17 +149,17 @@ see what code gcc generates:
  > .L1423:
  >         movzbl %dl,%esi
 
-The optimizer does a good job and gives us something we can actually 
-understand. Can we? The actual user access is quite obvious. Thanks 
-to the unified address space we can just access the address in user 
+The optimizer does a good job and gives us something we can actually
+understand. Can we? The actual user access is quite obvious. Thanks
+to the unified address space we can just access the address in user
 memory. But what does the .section stuff do?????
 
 To understand this we have to look at the final kernel:
 
  > objdump --section-headers vmlinux
- > 
+ >
  > vmlinux:     file format elf32-i386
- > 
+ >
  > Sections:
  > Idx Name          Size      VMA       LMA       File off  Algn
  >   0 .text         00098f40  c0100000  c0100000  00001000  2**4
@@ -198,18 +198,18 @@ final kernel executable:
 
 The whole user memory access is reduced to 10 x86 machine instructions.
 The instructions bracketed in the .section directives are no longer
-in the normal execution path. They are located in a different section 
+in the normal execution path. They are located in a different section
 of the executable file:
 
  > objdump --disassemble --section=.fixup vmlinux
- > 
+ >
  > c0199ff5 <.fixup+10b5> movl   $0xfffffff2,%eax
  > c0199ffa <.fixup+10ba> xorb   %dl,%dl
  > c0199ffc <.fixup+10bc> jmp    c017e7a7 <do_con_write+e3>
 
 And finally:
  > objdump --full-contents --section=__ex_table vmlinux
- > 
+ >
  >  c01aa7c4 93c017c0 e09f19c0 97c017c0 99c017c0  ................
  >  c01aa7d4 f6c217c0 e99f19c0 a5e717c0 f59f19c0  ................
  >  c01aa7e4 080a18c0 01a019c0 0a0a18c0 04a019c0  ................
@@ -235,8 +235,8 @@ sections in the ELF object file. So the instructions
 ended up in the .fixup section of the object file and the addresses
         .long 1b,3b
 ended up in the __ex_table section of the object file. 1b and 3b
-are local labels. The local label 1b (1b stands for next label 1 
-backward) is the address of the instruction that might fault, i.e. 
+are local labels. The local label 1b (1b stands for next label 1
+backward) is the address of the instruction that might fault, i.e.
 in our case the address of the label 1 is c017e7a5:
 the original assembly code: > 1:      movb (%ebx),%dl
 and linked in vmlinux     : > c017e7a5 <do_con_write+e1> movb   (%ebx),%dl
@@ -254,7 +254,7 @@ The assembly code
 becomes the value pair
  >  c01aa7d4 c017c2f6 c0199fe9 c017e7a5 c0199ff5  ................
                                ^this is ^this is
-                               1b       3b 
+                               1b       3b
 c017e7a5,c0199ff5 in the exception table of the kernel.
 
 So, what actually happens if a fault from kernel mode with no suitable
@@ -266,9 +266,9 @@ vma occurs?
 3.) CPU calls do_page_fault
 4.) do page fault calls search_exception_table (regs->eip == c017e7a5);
 5.) search_exception_table looks up the address c017e7a5 in the
-    exception table (i.e. the contents of the ELF section __ex_table) 
+    exception table (i.e. the contents of the ELF section __ex_table)
     and returns the address of the associated fault handle code c0199ff5.
-6.) do_page_fault modifies its own return address to point to the fault 
+6.) do_page_fault modifies its own return address to point to the fault
     handle code and returns.
 7.) execution continues in the fault handling code.
 8.) 8a) EAX becomes -EFAULT (== -14)

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 31
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc6
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
@@ -140,15 +140,13 @@ _all: modules
 endif
 
 srctree		:= $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
-TOPDIR		:= $(srctree)
-# FIXME - TOPDIR is obsolete, use srctree/objtree
 objtree		:= $(CURDIR)
 src		:= $(srctree)
 obj		:= $(objtree)
 
 VPATH		:= $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
 
-export srctree objtree VPATH TOPDIR
+export srctree objtree VPATH
 
 
 # SUBARCH tells the usermode build what the underlying arch is.  That is set
@@ -344,7 +342,9 @@ KBUILD_CPPFLAGS := -D__KERNEL__
 
 KBUILD_CFLAGS   := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 		   -fno-strict-aliasing -fno-common \
-		   -Werror-implicit-function-declaration
+		   -Werror-implicit-function-declaration \
+		   -Wno-format-security \
+		   -fno-delete-null-pointer-checks
 KBUILD_AFLAGS   := -D__ASSEMBLY__
 
 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
@@ -566,7 +566,7 @@ KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
 KBUILD_CFLAGS += $(call cc-option,-Wno-pointer-sign,)
 
 # disable invalid "can't wrap" optimizations for signed / pointers
-KBUILD_CFLAGS	+= $(call cc-option,-fwrapv)
+KBUILD_CFLAGS	+= $(call cc-option,-fno-strict-overflow)
 
 # revert to pre-gcc-4.4 behaviour of .eh_frame
 KBUILD_CFLAGS	+= $(call cc-option,-fno-dwarf2-cfi-asm)

arch/alpha/include/asm/percpu.h

@@ -30,7 +30,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 
 #ifndef MODULE
 #define SHIFT_PERCPU_PTR(var, offset) RELOC_HIDE(&per_cpu_var(var), (offset))
-#define PER_CPU_ATTRIBUTES
+#define PER_CPU_DEF_ATTRIBUTES
 #else
 /*
  * To calculate addresses of locally defined variables, GCC uses 32-bit
@@ -49,7 +49,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 		: "=&r"(__ptr), "=&r"(tmp_gp));		\
 	(typeof(&per_cpu_var(var)))(__ptr + (offset)); })
 
-#define PER_CPU_ATTRIBUTES	__used
+#define PER_CPU_DEF_ATTRIBUTES	__used
 
 #endif /* MODULE */
 
@@ -71,7 +71,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 #define __get_cpu_var(var)		per_cpu_var(var)
 #define __raw_get_cpu_var(var)		per_cpu_var(var)
 
-#define PER_CPU_ATTRIBUTES
+#define PER_CPU_DEF_ATTRIBUTES
 
 #endif /* SMP */
 

arch/alpha/include/asm/thread_info.h

@@ -37,6 +37,7 @@ struct thread_info {
 	.task		= &tsk,			\
 	.exec_domain	= &default_exec_domain,	\
 	.addr_limit	= KERNEL_DS,		\
+	.preempt_count	= INIT_PREEMPT_COUNT,	\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
 	},					\

arch/alpha/include/asm/tlb.h

@@ -9,7 +9,7 @@
 
 #include <asm-generic/tlb.h>
 
-#define __pte_free_tlb(tlb, pte)			pte_free((tlb)->mm, pte)
-#define __pmd_free_tlb(tlb, pmd)			pmd_free((tlb)->mm, pmd)
+#define __pte_free_tlb(tlb, pte, address)		pte_free((tlb)->mm, pte)
+#define __pmd_free_tlb(tlb, pmd, address)		pmd_free((tlb)->mm, pmd)
  
 #endif

arch/alpha/kernel/ptrace.c

@@ -8,7 +8,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>

arch/arm/Kconfig.debug

@@ -99,14 +99,6 @@ config DEBUG_CLPS711X_UART2
 	  output to the second serial port on these devices.  Saying N will
 	  cause the debug messages to appear on the first serial port.
 
-config DEBUG_S3C_PORT
-	depends on DEBUG_LL && PLAT_S3C
-	bool "Kernel low-level debugging messages via S3C UART"
-	help
-	  Say Y here if you want debug print routines to go to one of the
-	  S3C internal UARTs. The chosen UART must have been configured
-	  before it is used.
-
 config DEBUG_S3C_UART
 	depends on PLAT_S3C
 	int "S3C UART to use for low-level debug"

arch/arm/boot/compressed/misc.c

@@ -29,7 +29,6 @@ unsigned int __machine_arch_type;
 
 static void putstr(const char *ptr);
 
-#include <linux/compiler.h>
 #include <mach/uncompress.h>
 
 #ifdef CONFIG_DEBUG_ICEDCC

arch/arm/common/clkdev.c

@@ -17,6 +17,7 @@
 #include <linux/err.h>
 #include <linux/string.h>
 #include <linux/mutex.h>
+#include <linux/clk.h>
 
 #include <asm/clkdev.h>
 #include <mach/clkdev.h>

arch/arm/configs/mx27_defconfig

@@ -1,15 +1,15 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc1
-# Wed Apr  8 10:18:06 2009
+# Linux kernel version: 2.6.31-rc4
+# Fri Jul 24 16:08:06 2009
 #
 CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,14 +18,13 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -85,7 +84,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -99,6 +103,12 @@ CONFIG_KPROBES=y
 CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -111,7 +121,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -138,13 +148,14 @@ CONFIG_FREEZER=y
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -153,25 +164,25 @@ CONFIG_FREEZER=y
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-CONFIG_ARCH_MXC=y
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
 
 #
 # Freescale MXC Implementations
@@ -188,6 +199,8 @@ CONFIG_MACH_MX27=y
 CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_PCM038=y
 CONFIG_MACH_PCM970_BASEBOARD=y
+CONFIG_MACH_MX27_3DS=y
+CONFIG_MACH_MX27LITE=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
 
@@ -213,7 +226,6 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -238,7 +250,6 @@ CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -253,10 +264,11 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -361,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -474,7 +487,16 @@ CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_MXC=y
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -485,7 +507,15 @@ CONFIG_MTD_PHYSMAP=y
 #
 # UBI - Unsorted block images
 #
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
@@ -494,7 +524,21 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MISC_DEVICES is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -508,7 +552,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -534,6 +577,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 CONFIG_FEC=y
 # CONFIG_FEC2 is not set
 # CONFIG_NETDEV_1000 is not set
@@ -580,6 +625,11 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
@@ -592,6 +642,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -644,6 +695,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IMX=y
 # CONFIG_I2C_OCORES is not set
@@ -668,7 +720,6 @@ CONFIG_I2C_IMX=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -719,6 +770,7 @@ CONFIG_W1=y
 #
 # CONFIG_W1_MASTER_DS2482 is not set
 CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_DS1WM is not set
 # CONFIG_W1_MASTER_GPIO is not set
 
 #
@@ -753,54 +805,16 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_MC44S803=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -917,6 +931,7 @@ CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -962,12 +977,15 @@ CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -1021,6 +1039,12 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1119,25 +1143,11 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1151,16 +1161,104 @@ CONFIG_ARM_UNWIND=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
 CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_RATIONAL=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
 # CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
@@ -1168,6 +1266,8 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y

arch/arm/configs/mx3_defconfig

@@ -1,15 +1,15 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc1
-# Wed Apr  8 11:06:37 2009
+# Linux kernel version: 2.6.31-rc4
+# Tue Jul 28 14:11:34 2009
 #
 CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,14 +18,13 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -86,7 +85,12 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -97,6 +101,11 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -109,7 +118,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -136,13 +145,14 @@ CONFIG_FREEZER=y
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -151,25 +161,25 @@ CONFIG_FREEZER=y
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-CONFIG_ARCH_MXC=y
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
 
 #
 # Freescale MXC Implementations
@@ -178,6 +188,7 @@ CONFIG_ARCH_MXC=y
 # CONFIG_ARCH_MX2 is not set
 CONFIG_ARCH_MX3=y
 CONFIG_ARCH_MX31=y
+CONFIG_ARCH_MX35=y
 
 #
 # MX3 platforms:
@@ -185,12 +196,19 @@ CONFIG_ARCH_MX31=y
 CONFIG_MACH_MX31ADS=y
 CONFIG_MACH_MX31ADS_WM1133_EV1=y
 CONFIG_MACH_PCM037=y
+CONFIG_MACH_PCM037_EET=y
 CONFIG_MACH_MX31LITE=y
 CONFIG_MACH_MX31_3DS=y
 CONFIG_MACH_MX31MOBOARD=y
+CONFIG_MACH_MX31LILLY=y
 CONFIG_MACH_QONG=y
+CONFIG_MACH_PCM043=y
+CONFIG_MACH_ARMADILLO5X0=y
+CONFIG_MACH_MX35_3DS=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
+CONFIG_ARCH_HAS_RNGA=y
+CONFIG_ARCH_MXC_IOMUX_V3=y
 
 #
 # Processor Type
@@ -218,6 +236,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_OUTER_CACHE=y
 CONFIG_CACHE_L2X0=y
+# CONFIG_ARM_ERRATA_411920 is not set
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -242,7 +261,6 @@ CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -257,10 +275,11 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -362,6 +381,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -465,7 +485,16 @@ CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_MXC=y
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -476,10 +505,30 @@ CONFIG_MTD_PHYSMAP=y
 #
 # UBI - Unsorted block images
 #
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 # CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -493,7 +542,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -528,7 +576,7 @@ CONFIG_MII=y
 # CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
 CONFIG_SMSC911X=y
-# CONFIG_DNET is not set
+CONFIG_DNET=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -537,8 +585,10 @@ CONFIG_SMSC911X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-CONFIG_CS89x0=y
-CONFIG_CS89x0_NONISA_IRQ=y
+# CONFIG_CS89x0 is not set
+# CONFIG_KS8842 is not set
+CONFIG_FEC=y
+# CONFIG_FEC2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -609,6 +659,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_IMX=y
 # CONFIG_I2C_OCORES is not set
@@ -633,7 +684,6 @@ CONFIG_I2C_IMX=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -669,6 +719,7 @@ CONFIG_W1=y
 #
 # CONFIG_W1_MASTER_DS2482 is not set
 CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_DS1WM is not set
 # CONFIG_W1_MASTER_GPIO is not set
 
 #
@@ -703,6 +754,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
@@ -711,10 +764,8 @@ CONFIG_MFD_WM8350_CONFIG_MODE_0=y
 CONFIG_MFD_WM8352_CONFIG_MODE_0=y
 CONFIG_MFD_WM8350_I2C=y
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
+# CONFIG_AB3100_CORE is not set
+CONFIG_MEDIA_SUPPORT=y
 
 #
 # Multimedia core support
@@ -758,8 +809,10 @@ CONFIG_SOC_CAMERA_MT9T031=y
 CONFIG_SOC_CAMERA_MT9V022=y
 CONFIG_SOC_CAMERA_TW9910=y
 # CONFIG_SOC_CAMERA_PLATFORM is not set
-# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_SOC_CAMERA_OV772X=y
+CONFIG_MX3_VIDEO=y
 CONFIG_VIDEO_MX3=y
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
 # CONFIG_RADIO_ADAPTERS is not set
 # CONFIG_DAB is not set
 
@@ -847,8 +900,11 @@ CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_DEBUG is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
 # CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_WM8350=y
+# CONFIG_REGULATOR_LP3971 is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -861,10 +917,12 @@ CONFIG_REGULATOR_WM8350=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -921,6 +979,12 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -937,6 +1001,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -979,22 +1044,7 @@ CONFIG_FRAME_WARN=1024
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_ARM_UNWIND=y
@@ -1094,9 +1144,9 @@ CONFIG_CRYPTO_DES=y
 #
 # Compression
 #
-# CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_DEFLATE=y
 # CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_LZO=y
 
 #
 # Random Number Generation
@@ -1109,9 +1159,10 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_RATIONAL=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
 # CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
@@ -1119,6 +1170,8 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y

arch/arm/configs/omap3_evm_defconfig

@@ -1107,7 +1107,7 @@ CONFIG_USB_ZERO=m
 CONFIG_USB_OTG_UTILS=y
 # CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_ISP1301_OMAP is not set
-CONFIG_TWL4030_USB=y
+# CONFIG_TWL4030_USB is not set
 # CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set

arch/arm/configs/s3c2410_defconfig

@@ -260,6 +260,7 @@ CONFIG_MACH_NEXCODER_2440=y
 CONFIG_SMDK2440_CPU2440=y
 CONFIG_MACH_AT2440EVB=y
 CONFIG_CPU_S3C2442=y
+CONFIG_MACH_MINI2440=y
 
 #
 # S3C2442 Machines
@@ -2298,7 +2299,6 @@ CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_PORT=y
 CONFIG_DEBUG_S3C_UART=0
 
 #

arch/arm/configs/s3c6400_defconfig

@@ -816,7 +816,6 @@ CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C_PORT=y
 CONFIG_DEBUG_S3C_UART=0
 
 #

arch/arm/configs/tct_hammer_defconfig

@@ -857,7 +857,6 @@ CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_DEBUG_S3C_PORT is not set
 CONFIG_DEBUG_S3C_UART=0
 
 #

arch/arm/configs/u300_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
-# Mon Jun  1 09:18:22 2009
+# Linux kernel version: 2.6.31-rc3
+# Thu Jul 16 23:36:10 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -9,7 +9,6 @@ CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,13 +17,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -68,7 +66,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -81,8 +78,13 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 # CONFIG_AIO is not set
+
+#
+# Performance Counters
+#
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -94,6 +96,10 @@ CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -106,7 +112,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -138,9 +144,9 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -216,8 +222,8 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
 CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -243,7 +249,6 @@ CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -258,17 +263,18 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock2 rw rootfstype=yaffs2 console=ttyAMA0,115200n8 ab3100.force=0,0x48 mtdparts=u300nand:128k@0x0(bootrecords)ro,8064k@128k(free)ro,253952k@8192k(platform) lpj=515072"
+CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
@@ -359,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -497,6 +504,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -533,12 +541,14 @@ CONFIG_INPUT_EVDEV=y
 #
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -597,9 +607,11 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
+CONFIG_I2C_STU300=y
 
 #
 # External I2C/SMBus adapter drivers
@@ -620,7 +632,6 @@ CONFIG_I2C_HELPER_AUTO=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -635,6 +646,7 @@ CONFIG_SPI_MASTER=y
 #
 # CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PL022=y
 
 #
 # SPI Protocol Masters
@@ -647,6 +659,7 @@ CONFIG_POWER_SUPPLY=y
 # CONFIG_PDA_POWER is not set
 # CONFIG_BATTERY_DS2760 is not set
 # CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
@@ -657,6 +670,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+CONFIG_COH901327_WATCHDOG=y
 CONFIG_SSB_POSSIBLE=y
 
 #
@@ -678,22 +692,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+CONFIG_AB3100_CORE=y
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -760,6 +761,11 @@ CONFIG_SND_JACK=y
 # CONFIG_SND_VERBOSE_PROCFS is not set
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 # CONFIG_SND_DRIVERS is not set
 # CONFIG_SND_ARM is not set
 # CONFIG_SND_SPI is not set
@@ -770,7 +776,7 @@ CONFIG_SND_SOC_I2C_AND_SPI=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_DEBUG=y
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
@@ -797,7 +803,7 @@ CONFIG_LEDS_CLASS=y
 #
 # CONFIG_LEDS_PCA9532 is not set
 # CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_DAC124S085 is not set
 # CONFIG_LEDS_BD2802 is not set
@@ -845,6 +851,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -887,7 +894,10 @@ CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_DEBUG is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
 # CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_LP3971 is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
@@ -900,16 +910,19 @@ CONFIG_REGULATOR=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
 
 #
 # Caches
@@ -1033,6 +1046,7 @@ CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1063,18 +1077,16 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set

arch/arm/include/asm/atomic.h

@@ -159,8 +159,6 @@ static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
 
 #else /* ARM_ARCH_6 */
 
-#include <asm/system.h>
-
 #ifdef CONFIG_SMP
 #error SMP not supported on pre-ARMv6 CPUs
 #endif

arch/arm/include/asm/page.h

@@ -12,7 +12,7 @@
 
 /* PAGE_SHIFT determines the page size */
 #define PAGE_SHIFT		12
-#define PAGE_SIZE		(1UL << PAGE_SHIFT)
+#define PAGE_SIZE		(_AC(1,UL) << PAGE_SHIFT)
 #define PAGE_MASK		(~(PAGE_SIZE-1))
 
 #ifndef __ASSEMBLY__

arch/arm/include/asm/pgtable.h

@@ -285,15 +285,6 @@ extern struct page *empty_zero_page;
 #define pte_young(pte)		(pte_val(pte) & L_PTE_YOUNG)
 #define pte_special(pte)	(0)
 
-/*
- * The following only works if pte_present() is not true.
- */
-#define pte_file(pte)		(pte_val(pte) & L_PTE_FILE)
-#define pte_to_pgoff(x)		(pte_val(x) >> 2)
-#define pgoff_to_pte(x)		__pte(((x) << 2) | L_PTE_FILE)
-
-#define PTE_FILE_MAX_BITS	30
-
 #define PTE_BIT_FUNC(fn,op) \
 static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
 
@@ -384,16 +375,50 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
-/* Encode and decode a swap entry.
+/*
+ * Encode and decode a swap entry.  Swap entries are stored in the Linux
+ * page tables as follows:
  *
- * We support up to 32GB of swap on 4k machines
+ *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ *   <--------------- offset --------------------> <--- type --> 0 0
+ *
+ * This gives us up to 127 swap files and 32GB per swap file.  Note that
+ * the offset field is always non-zero.
  */
-#define __swp_type(x)		(((x).val >> 2) & 0x7f)
-#define __swp_offset(x)		((x).val >> 9)
-#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) })
+#define __SWP_TYPE_SHIFT	2
+#define __SWP_TYPE_BITS		7
+#define __SWP_TYPE_MASK		((1 << __SWP_TYPE_BITS) - 1)
+#define __SWP_OFFSET_SHIFT	(__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
+
+#define __swp_type(x)		(((x).val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK)
+#define __swp_offset(x)		((x).val >> __SWP_OFFSET_SHIFT)
+#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << __SWP_TYPE_SHIFT) | ((offset) << __SWP_OFFSET_SHIFT) })
+
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(swp)	((pte_t) { (swp).val })
 
+/*
+ * It is an error for the kernel to have more swap files than we can
+ * encode in the PTEs.  This ensures that we know when MAX_SWAPFILES
+ * is increased beyond what we presently support.
+ */
+#define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS)
+
+/*
+ * Encode and decode a file entry.  File entries are stored in the Linux
+ * page tables as follows:
+ *
+ *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ *   <------------------------ offset -------------------------> 1 0
+ */
+#define pte_file(pte)		(pte_val(pte) & L_PTE_FILE)
+#define pte_to_pgoff(x)		(pte_val(x) >> 2)
+#define pgoff_to_pte(x)		__pte(((x) << 2) | L_PTE_FILE)
+
+#define PTE_FILE_MAX_BITS	30
+
 /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
 /* FIXME: this is not correct */
 #define kern_addr_valid(addr)	(1)

arch/arm/include/asm/thread_info.h

@@ -73,7 +73,7 @@ struct thread_info {
 	.task		= &tsk,						\
 	.exec_domain	= &default_exec_domain,				\
 	.flags		= 0,						\
-	.preempt_count	= 1,						\
+	.preempt_count	= INIT_PREEMPT_COUNT,				\
 	.addr_limit	= KERNEL_DS,					\
 	.cpu_domain	= domain_val(DOMAIN_USER, DOMAIN_MANAGER) |	\
 			  domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) |	\

arch/arm/include/asm/tlb.h

@@ -102,8 +102,8 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 }
 
 #define tlb_remove_page(tlb,page)	free_page_and_swap_cache(page)
-#define pte_free_tlb(tlb, ptep)		pte_free((tlb)->mm, ptep)
-#define pmd_free_tlb(tlb, pmdp)		pmd_free((tlb)->mm, pmdp)
+#define pte_free_tlb(tlb, ptep, addr)	pte_free((tlb)->mm, ptep)
+#define pmd_free_tlb(tlb, pmdp, addr)	pmd_free((tlb)->mm, pmdp)
 
 #define tlb_migrate_finish(mm)		do { } while (0)
 

arch/arm/kernel/entry-common.S

@@ -148,7 +148,7 @@ trace:
 	sub r0, r0, #MCOUNT_INSN_SIZE
 	mov lr, pc
 	mov pc, r2
-	mov lr, r1				@ restore lr
+	ldr lr, [fp, #-4]			@ restore lr
 	ldmia sp!, {r0-r3, pc}
 
 #endif /* CONFIG_DYNAMIC_FTRACE */

arch/arm/kernel/irq.c

@@ -98,17 +98,6 @@ unlock:
 	return 0;
 }
 
-/* Handle bad interrupts */
-static struct irq_desc bad_irq_desc = {
-	.handle_irq = handle_bad_irq,
-	.lock = __SPIN_LOCK_UNLOCKED(bad_irq_desc.lock),
-};
-
-#ifdef CONFIG_CPUMASK_OFFSTACK
-/* We are not allocating bad_irq_desc.affinity or .pending_mask */
-#error "ARM architecture does not support CONFIG_CPUMASK_OFFSTACK."
-#endif
-
 /*
  * do_IRQ handles all hardware IRQ's.  Decoded IRQs should not
  * come via this function.  Instead, they should provide their
@@ -124,10 +113,13 @@ asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
 	 * Some hardware gives randomly wrong interrupts.  Rather
 	 * than crashing, do something sensible.
 	 */
-	if (irq >= NR_IRQS)
-		handle_bad_irq(irq, &bad_irq_desc);
-	else
+	if (unlikely(irq >= NR_IRQS)) {
+		if (printk_ratelimit())
+			printk(KERN_WARNING "Bad IRQ%u\n", irq);
+		ack_bad_irq(irq);
+	} else {
 		generic_handle_irq(irq);
+	}
 
 	/* AT91 specific workaround */
 	irq_finish(irq);
@@ -165,10 +157,6 @@ void __init init_IRQ(void)
 	for (irq = 0; irq < NR_IRQS; irq++)
 		irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE;
 
-#ifdef CONFIG_SMP
-	cpumask_setall(bad_irq_desc.affinity);
-	bad_irq_desc.node = smp_processor_id();
-#endif
 	init_arch_irq();
 }
 

arch/arm/kernel/signal.c

@@ -133,7 +133,7 @@ sys_sigaction(int sig, const struct old_sigaction __user *act,
 }
 
 #ifdef CONFIG_CRUNCH
-static int preserve_crunch_context(struct crunch_sigframe *frame)
+static int preserve_crunch_context(struct crunch_sigframe __user *frame)
 {
 	char kbuf[sizeof(*frame) + 8];
 	struct crunch_sigframe *kframe;
@@ -146,7 +146,7 @@ static int preserve_crunch_context(struct crunch_sigframe *frame)
 	return __copy_to_user(frame, kframe, sizeof(*frame));
 }
 
-static int restore_crunch_context(struct crunch_sigframe *frame)
+static int restore_crunch_context(struct crunch_sigframe __user *frame)
 {
 	char kbuf[sizeof(*frame) + 8];
 	struct crunch_sigframe *kframe;

arch/arm/kernel/vmlinux.lds.S

@@ -6,6 +6,7 @@
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/thread_info.h>
 #include <asm/memory.h>
+#include <asm/page.h>
 	
 OUTPUT_ARCH(arm)
 ENTRY(stext)
@@ -63,7 +64,7 @@ SECTIONS
 			usr/built-in.o(.init.ramfs)
 		__initramfs_end = .;
 #endif
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__per_cpu_load = .;
 		__per_cpu_start = .;
 			*(.data.percpu.page_aligned)
@@ -73,7 +74,7 @@ SECTIONS
 #ifndef CONFIG_XIP_KERNEL
 		__init_begin = _stext;
 		INIT_DATA
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__init_end = .;
 #endif
 	}
@@ -118,7 +119,7 @@ SECTIONS
 		*(.got)			/* Global offset table		*/
 	}
 
-	RODATA
+	RO_DATA(PAGE_SIZE)
 
 	_etext = .;			/* End of text and rodata section */
 
@@ -158,17 +159,17 @@ SECTIONS
 		*(.data.init_task)
 
 #ifdef CONFIG_XIP_KERNEL
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__init_begin = .;
 		INIT_DATA
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__init_end = .;
 #endif
 
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__nosave_begin = .;
 		*(.data.nosave)
-		. = ALIGN(4096);
+		. = ALIGN(PAGE_SIZE);
 		__nosave_end = .;
 
 		/*

arch/arm/mach-at91/board-sam9g20ek.c

@@ -24,6 +24,8 @@
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/at73c213.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
 #include <linux/clk.h>
 
 #include <mach/hardware.h>
@@ -218,6 +220,56 @@ static struct gpio_led ek_leds[] = {
 	}
 };
 
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+	{
+		.gpio		= AT91_PIN_PA30,
+		.code		= BTN_3,
+		.desc		= "Button 3",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+	{
+		.gpio		= AT91_PIN_PA31,
+		.code		= BTN_4,
+		.desc		= "Button 4",
+		.active_low	= 1,
+		.wakeup		= 1,
+	}
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+	.buttons	= ek_buttons,
+	.nbuttons	= ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ek_button_data,
+	}
+};
+
+static void __init ek_add_device_buttons(void)
+{
+	at91_set_gpio_input(AT91_PIN_PA30, 1);	/* btn3 */
+	at91_set_deglitch(AT91_PIN_PA30, 1);
+	at91_set_gpio_input(AT91_PIN_PA31, 1);	/* btn4 */
+	at91_set_deglitch(AT91_PIN_PA31, 1);
+
+	platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
 static struct i2c_board_info __initdata ek_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("24c512", 0x50),
@@ -245,6 +297,8 @@ static void __init ek_board_init(void)
 	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	/* Push Buttons */
+	ek_add_device_buttons();
 	/* PCK0 provides MCLK to the WM8731 */
 	at91_set_B_periph(AT91_PIN_PC1, 0);
 	/* SSC (for WM8731) */

arch/arm/mach-at91/board-sam9rlek.c

@@ -186,19 +186,21 @@ static struct fb_monspecs at91fb_default_monspecs = {
 static void at91_lcdc_power_control(int on)
 {
 	if (on)
-		at91_set_gpio_value(AT91_PIN_PA30, 0);	/* power up */
+		at91_set_gpio_value(AT91_PIN_PC1, 0);	/* power up */
 	else
-		at91_set_gpio_value(AT91_PIN_PA30, 1);	/* power down */
+		at91_set_gpio_value(AT91_PIN_PC1, 1);	/* power down */
 }
 
 /* Driver datas */
 static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+	.lcdcon_is_backlight            = true,
 	.default_bpp			= 16,
 	.default_dmacon			= ATMEL_LCDC_DMAEN,
 	.default_lcdcon2		= AT91SAM9RL_DEFAULT_LCDCON2,
 	.default_monspecs		= &at91fb_default_monspecs,
 	.atmel_lcdfb_power_control	= at91_lcdc_power_control,
 	.guard_time			= 1,
+	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
 };
 
 #else

arch/arm/mach-at91/include/mach/at_hdmac.h

@@ -0,0 +1,102 @@
+/*
+ * Header file for the Atmel AHB DMA Controller driver
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef AT_HDMAC_H
+#define AT_HDMAC_H
+
+#include <linux/dmaengine.h>
+
+/**
+ * struct at_dma_platform_data - Controller configuration parameters
+ * @nr_channels: Number of channels supported by hardware (max 8)
+ * @cap_mask: dma_capability flags supported by the platform
+ */
+struct at_dma_platform_data {
+	unsigned int	nr_channels;
+	dma_cap_mask_t  cap_mask;
+};
+
+/**
+ * enum at_dma_slave_width - DMA slave register access width.
+ * @AT_DMA_SLAVE_WIDTH_8BIT: Do 8-bit slave register accesses
+ * @AT_DMA_SLAVE_WIDTH_16BIT: Do 16-bit slave register accesses
+ * @AT_DMA_SLAVE_WIDTH_32BIT: Do 32-bit slave register accesses
+ */
+enum at_dma_slave_width {
+	AT_DMA_SLAVE_WIDTH_8BIT = 0,
+	AT_DMA_SLAVE_WIDTH_16BIT,
+	AT_DMA_SLAVE_WIDTH_32BIT,
+};
+
+/**
+ * struct at_dma_slave - Controller-specific information about a slave
+ * @dma_dev: required DMA master device
+ * @tx_reg: physical address of data register used for
+ *	memory-to-peripheral transfers
+ * @rx_reg: physical address of data register used for
+ *	peripheral-to-memory transfers
+ * @reg_width: peripheral register width
+ * @cfg: Platform-specific initializer for the CFG register
+ * @ctrla: Platform-specific initializer for the CTRLA register
+ */
+struct at_dma_slave {
+	struct device		*dma_dev;
+	dma_addr_t		tx_reg;
+	dma_addr_t		rx_reg;
+	enum at_dma_slave_width	reg_width;
+	u32			cfg;
+	u32			ctrla;
+};
+
+
+/* Platform-configurable bits in CFG */
+#define	ATC_SRC_PER(h)		(0xFU & (h))	/* Channel src rq associated with periph handshaking ifc h */
+#define	ATC_DST_PER(h)		((0xFU & (h)) <<  4)	/* Channel dst rq associated with periph handshaking ifc h */
+#define	ATC_SRC_REP		(0x1 <<  8)	/* Source Replay Mod */
+#define	ATC_SRC_H2SEL		(0x1 <<  9)	/* Source Handshaking Mod */
+#define		ATC_SRC_H2SEL_SW	(0x0 <<  9)
+#define		ATC_SRC_H2SEL_HW	(0x1 <<  9)
+#define	ATC_DST_REP		(0x1 << 12)	/* Destination Replay Mod */
+#define	ATC_DST_H2SEL		(0x1 << 13)	/* Destination Handshaking Mod */
+#define		ATC_DST_H2SEL_SW	(0x0 << 13)
+#define		ATC_DST_H2SEL_HW	(0x1 << 13)
+#define	ATC_SOD			(0x1 << 16)	/* Stop On Done */
+#define	ATC_LOCK_IF		(0x1 << 20)	/* Interface Lock */
+#define	ATC_LOCK_B		(0x1 << 21)	/* AHB Bus Lock */
+#define	ATC_LOCK_IF_L		(0x1 << 22)	/* Master Interface Arbiter Lock */
+#define		ATC_LOCK_IF_L_CHUNK	(0x0 << 22)
+#define		ATC_LOCK_IF_L_BUFFER	(0x1 << 22)
+#define	ATC_AHB_PROT_MASK	(0x7 << 24)	/* AHB Protection */
+#define	ATC_FIFOCFG_MASK	(0x3 << 28)	/* FIFO Request Configuration */
+#define		ATC_FIFOCFG_LARGESTBURST	(0x0 << 28)
+#define		ATC_FIFOCFG_HALFFIFO		(0x1 << 28)
+#define		ATC_FIFOCFG_ENOUGHSPACE		(0x2 << 28)
+
+/* Platform-configurable bits in CTRLA */
+#define	ATC_SCSIZE_MASK		(0x7 << 16)	/* Source Chunk Transfer Size */
+#define		ATC_SCSIZE_1		(0x0 << 16)
+#define		ATC_SCSIZE_4		(0x1 << 16)
+#define		ATC_SCSIZE_8		(0x2 << 16)
+#define		ATC_SCSIZE_16		(0x3 << 16)
+#define		ATC_SCSIZE_32		(0x4 << 16)
+#define		ATC_SCSIZE_64		(0x5 << 16)
+#define		ATC_SCSIZE_128		(0x6 << 16)
+#define		ATC_SCSIZE_256		(0x7 << 16)
+#define	ATC_DCSIZE_MASK		(0x7 << 20)	/* Destination Chunk Transfer Size */
+#define		ATC_DCSIZE_1		(0x0 << 20)
+#define		ATC_DCSIZE_4		(0x1 << 20)
+#define		ATC_DCSIZE_8		(0x2 << 20)
+#define		ATC_DCSIZE_16		(0x3 << 20)
+#define		ATC_DCSIZE_32		(0x4 << 20)
+#define		ATC_DCSIZE_64		(0x5 << 20)
+#define		ATC_DCSIZE_128		(0x6 << 20)
+#define		ATC_DCSIZE_256		(0x7 << 20)
+
+#endif /* AT_HDMAC_H */

arch/arm/mach-davinci/board-dm355-evm.c

@@ -37,7 +37,6 @@
 #include <mach/serial.h>
 #include <mach/nand.h>
 #include <mach/mmc.h>
-#include <mach/common.h>
 
 #define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x01e10000
 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x02000000

arch/arm/mach-davinci/board-dm355-leopard.c

@@ -36,7 +36,6 @@
 #include <mach/serial.h>
 #include <mach/nand.h>
 #include <mach/mmc.h>
-#include <mach/common.h>
 
 #define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x01e10000
 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x02000000

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -45,7 +45,6 @@
 #include <mach/nand.h>
 #include <mach/mmc.h>
 #include <mach/emac.h>
-#include <mach/common.h>
 
 #define DM644X_EVM_PHY_MASK		(0x2)
 #define DM644X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */

arch/arm/mach-davinci/board-dm646x-evm.c

@@ -47,7 +47,6 @@
 #include <mach/i2c.h>
 #include <mach/mmc.h>
 #include <mach/emac.h>
-#include <mach/common.h>
 
 #define DM646X_EVM_PHY_MASK		(0x2)
 #define DM646X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */

arch/arm/mach-davinci/board-sffsdr.c

@@ -52,7 +52,6 @@
 #include <mach/serial.h>
 #include <mach/psc.h>
 #include <mach/mux.h>
-#include <mach/common.h>
 
 #define SFFSDR_PHY_MASK		(0x2)
 #define SFFSDR_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */

arch/arm/mach-ep93xx/dma-m2p.c

@@ -33,6 +33,7 @@
 #include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
+#include <linux/io.h>
 
 #include <mach/dma.h>
 #include <mach/hardware.h>

arch/arm/mach-ep93xx/include/mach/ts72xx.h

@@ -41,9 +41,6 @@
 #define TS72XX_OPTIONS2_TS9420_BOOT	0x02
 
 
-#define TS72XX_NOR_PHYS_BASE		0x60000000
-#define TS72XX_NOR2_PHYS_BASE		0x62000000
-
 #define TS72XX_NAND1_DATA_PHYS_BASE	0x60000000
 #define TS72XX_NAND2_DATA_PHYS_BASE	0x70000000
 #define TS72XX_NAND_DATA_VIRT_BASE	0xfebfc000

arch/arm/mach-ep93xx/ts72xx.c

@@ -112,13 +112,16 @@ static void __init ts72xx_map_io(void)
 	}
 }
 
+/*************************************************************************
+ * NOR flash (TS-7200 only)
+ *************************************************************************/
 static struct physmap_flash_data ts72xx_flash_data = {
-	.width		= 1,
+	.width		= 2,
 };
 
 static struct resource ts72xx_flash_resource = {
-	.start		= TS72XX_NOR_PHYS_BASE,
-	.end		= TS72XX_NOR_PHYS_BASE + SZ_16M - 1,
+	.start		= EP93XX_CS6_PHYS_BASE,
+	.end		= EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
@@ -132,6 +135,12 @@ static struct platform_device ts72xx_flash = {
 	.resource	= &ts72xx_flash_resource,
 };
 
+static void __init ts72xx_register_flash(void)
+{
+	if (board_is_ts7200())
+		platform_device_register(&ts72xx_flash);
+}
+
 static unsigned char ts72xx_rtc_readbyte(unsigned long addr)
 {
 	__raw_writeb(addr, TS72XX_RTC_INDEX_VIRT_BASE);
@@ -165,8 +174,7 @@ static struct ep93xx_eth_data ts72xx_eth_data = {
 static void __init ts72xx_init_machine(void)
 {
 	ep93xx_init_devices();
-	if (board_is_ts7200())
-		platform_device_register(&ts72xx_flash);
+	ts72xx_register_flash();
 	platform_device_register(&ts72xx_rtc_device);
 
 	ep93xx_register_eth(&ts72xx_eth_data, 1);

arch/arm/mach-kirkwood/mpp.h

@@ -289,7 +289,7 @@
 
 #define MPP48_GPIO		MPP( 48, 0x0, 1, 1, 0,   0,   0,   1    )
 #define MPP48_TSMP12		MPP( 48, 0x1, 1, 1, 0,   0,   0,   1    )
-#define MPP48_TDM_DTX		MPP( 48. 0x2, 0, 1, 0,   0,   0,   1    )
+#define MPP48_TDM_DTX		MPP( 48, 0x2, 0, 1, 0,   0,   0,   1    )
 
 #define MPP49_GPIO		MPP( 49, 0x0, 1, 1, 0,   0,   0,   1    )
 #define MPP49_TSMP9		MPP( 49, 0x1, 1, 1, 0,   0,   0,   1    )

arch/arm/mach-ks8695/include/mach/hardware.h

@@ -16,6 +16,11 @@
 
 #include <asm/sizes.h>
 
+/*
+ * Clocks are derived from MCLK, which is 25Mhz
+ */
+#define KS8695_CLOCK_RATE	25000000
+
 /*
  * Physical RAM address.
  */

arch/arm/mach-ks8695/include/mach/timex.h

@@ -14,7 +14,8 @@
 #ifndef __ASM_ARCH_TIMEX_H
 #define __ASM_ARCH_TIMEX_H
 
-/* timers are derived from MCLK, which is 25MHz */
-#define CLOCK_TICK_RATE 25000000
+#include <mach/hardware.h>
+
+#define CLOCK_TICK_RATE 	KS8695_CLOCK_RATE
 
 #endif

arch/arm/mach-ks8695/pci.c

@@ -245,6 +245,9 @@ static int ks8695_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs
 
 static void __init ks8695_pci_preinit(void)
 {
+	/* make software reset to avoid freeze if PCI bus was messed up */
+	__raw_writel(0x80000000, KS8695_PCI_VA + KS8695_PBCS);
+
 	/* stage 1 initialization, subid, subdevice = 0x0001 */
 	__raw_writel(0x00010001, KS8695_PCI_VA + KS8695_CRCSID);
 

arch/arm/mach-mx3/Kconfig

@@ -36,6 +36,14 @@ config MACH_PCM037
 	  Include support for Phytec pcm037 platform. This includes
 	  specific configurations for the board and its peripherals.
 
+config MACH_PCM037_EET
+	bool "Support pcm037 EET board extensions"
+	depends on MACH_PCM037
+	help
+	  Add support for PCM037 EET baseboard extensions. If you are using the
+	  OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
+	  command-line parameter.
+
 config MACH_MX31LITE
 	bool "Support MX31 LITEKIT (LogicPD)"
 	select ARCH_MX31

arch/arm/mach-mx3/Makefile

@@ -11,6 +11,7 @@ obj-$(CONFIG_MACH_MX31ADS)	+= mx31ads.o
 obj-$(CONFIG_MACH_MX31LILLY)	+= mx31lilly.o mx31lilly-db.o
 obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o
 obj-$(CONFIG_MACH_PCM037)	+= pcm037.o
+obj-$(CONFIG_MACH_PCM037_EET)	+= pcm037_eet.o
 obj-$(CONFIG_MACH_MX31_3DS)	+= mx31pdk.o
 obj-$(CONFIG_MACH_MX31MOBOARD)	+= mx31moboard.o mx31moboard-devboard.o \
 				   mx31moboard-marxbot.o

arch/arm/mach-mx3/armadillo5x0.c

@@ -31,6 +31,8 @@
 #include <linux/smsc911x.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -46,8 +48,10 @@
 #include <mach/mmc.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
+#include <mach/mxc_nand.h>
 
 #include "devices.h"
+#include "crm_regs.h"
 
 static int armadillo5x0_pins[] = {
 	/* UART1 */
@@ -93,7 +97,56 @@ static int armadillo5x0_pins[] = {
 	MX31_PIN_FPSHIFT__FPSHIFT,
 	MX31_PIN_DRDY0__DRDY0,
 	IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
+};
 
+/*
+ * NAND Flash
+ */
+static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = {
+	.width		= 1,
+	.hw_ecc		= 1,
+};
+
+/*
+ * MTD NOR Flash
+ */
+static struct mtd_partition armadillo5x0_nor_flash_partitions[] = {
+	{
+		.name		= "nor.bootloader",
+		.offset		= 0x00000000,
+		.size		= 4*32*1024,
+	}, {
+		.name		= "nor.kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 16*128*1024,
+	}, {
+		.name		= "nor.userland",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 110*128*1024,
+	}, {
+		.name		= "nor.config",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 1*128*1024,
+	},
+};
+
+static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
+	.width		= 2,
+	.parts		= armadillo5x0_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(armadillo5x0_nor_flash_partitions),
+};
+
+static struct resource armadillo5x0_nor_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= CS0_BASE_ADDR,
+	.end		= CS0_BASE_ADDR + SZ_64M - 1,
+};
+
+static struct platform_device armadillo5x0_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= -1,
+	.num_resources		= 1,
+	.resource		= &armadillo5x0_nor_flash_resource,
 };
 
 /*
@@ -272,6 +325,16 @@ static void __init armadillo5x0_init(void)
 	/* Register FB */
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);
+
+	/* Register NOR Flash */
+	mxc_register_device(&armadillo5x0_nor_flash,
+			    &armadillo5x0_nor_flash_pdata);
+
+	/* Register NAND Flash */
+	mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata);
+
+	/* set NAND page size to 2k if not configured via boot mode pins */
+	__raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
 }
 
 static void __init armadillo5x0_timer_init(void)

arch/arm/mach-mx3/devices.c

@@ -22,7 +22,6 @@
 #include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/gpio.h>
-#include <linux/dma-mapping.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/common.h>

arch/arm/mach-mx3/pcm037.c

@@ -18,7 +18,7 @@
 
 #include <linux/types.h>
 #include <linux/init.h>
-
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/plat-ram.h>
@@ -33,29 +33,67 @@
 #include <linux/irq.h>
 #include <linux/fsl_devices.h>
 
-#include <mach/hardware.h>
+#include <media/soc_camera.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
+#include <mach/board-pcm037.h>
 #include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/ipu.h>
-#include <mach/board-pcm037.h>
+#include <mach/mmc.h>
+#include <mach/mx3_camera.h>
 #include <mach/mx3fb.h>
 #include <mach/mxc_nand.h>
-#include <mach/mmc.h>
-#ifdef CONFIG_I2C_IMX
-#include <mach/i2c.h>
-#endif
 
 #include "devices.h"
+#include "pcm037.h"
+
+static enum pcm037_board_variant pcm037_instance = PCM037_PCM970;
+
+static int __init pcm037_variant_setup(char *str)
+{
+	if (!strcmp("eet", str))
+		pcm037_instance = PCM037_EET;
+	else if (strcmp("pcm970", str))
+		pr_warning("Unknown pcm037 baseboard variant %s\n", str);
+
+	return 1;
+}
+
+/* Supported values: "pcm970" (default) and "eet" */
+__setup("pcm037_variant=", pcm037_variant_setup);
+
+enum pcm037_board_variant pcm037_variant(void)
+{
+	return pcm037_instance;
+}
+
+/* UART1 with RTS/CTS handshake signals */
+static unsigned int pcm037_uart1_handshake_pins[] = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+};
+
+/* UART1 without RTS/CTS handshake signals */
+static unsigned int pcm037_uart1_pins[] = {
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+};
 
 static unsigned int pcm037_pins[] = {
 	/* I2C */
 	MX31_PIN_CSPI2_MOSI__SCL,
 	MX31_PIN_CSPI2_MISO__SDA,
+	MX31_PIN_CSPI2_SS2__I2C3_SDA,
+	MX31_PIN_CSPI2_SCLK__I2C3_SCL,
 	/* SDHC1 */
 	MX31_PIN_SD1_DATA3__SD1_DATA3,
 	MX31_PIN_SD1_DATA2__SD1_DATA2,
@@ -73,11 +111,6 @@ static unsigned int pcm037_pins[] = {
 	MX31_PIN_CSPI1_SS0__SS0,
 	MX31_PIN_CSPI1_SS1__SS1,
 	MX31_PIN_CSPI1_SS2__SS2,
-	/* UART1 */
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
 	/* UART2 */
 	MX31_PIN_TXD2__TXD2,
 	MX31_PIN_RXD2__RXD2,
@@ -120,6 +153,22 @@ static unsigned int pcm037_pins[] = {
 	MX31_PIN_D3_SPL__D3_SPL,
 	MX31_PIN_D3_CLS__D3_CLS,
 	MX31_PIN_LCS0__GPI03_23,
+	/* CSI */
+	IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO),
+	MX31_PIN_CSI_D6__CSI_D6,
+	MX31_PIN_CSI_D7__CSI_D7,
+	MX31_PIN_CSI_D8__CSI_D8,
+	MX31_PIN_CSI_D9__CSI_D9,
+	MX31_PIN_CSI_D10__CSI_D10,
+	MX31_PIN_CSI_D11__CSI_D11,
+	MX31_PIN_CSI_D12__CSI_D12,
+	MX31_PIN_CSI_D13__CSI_D13,
+	MX31_PIN_CSI_D14__CSI_D14,
+	MX31_PIN_CSI_D15__CSI_D15,
+	MX31_PIN_CSI_HSYNC__CSI_HSYNC,
+	MX31_PIN_CSI_MCLK__CSI_MCLK,
+	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
+	MX31_PIN_CSI_VSYNC__CSI_VSYNC,
 };
 
 static struct physmap_flash_data pcm037_flash_data = {
@@ -250,19 +299,43 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = {
 	.hw_ecc = 1,
 };
 
-#ifdef CONFIG_I2C_IMX
 static struct imxi2c_platform_data pcm037_i2c_1_data = {
 	.bitrate = 100000,
 };
 
+static struct imxi2c_platform_data pcm037_i2c_2_data = {
+	.bitrate = 20000,
+};
+
 static struct at24_platform_data board_eeprom = {
 	.byte_len = 4096,
 	.page_size = 32,
 	.flags = AT24_FLAG_ADDR16,
 };
 
+static int pcm037_camera_power(struct device *dev, int on)
+{
+	/* disable or enable the camera in X7 or X8 PCM970 connector */
+	gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), !on);
+	return 0;
+}
+
+static struct i2c_board_info pcm037_i2c_2_devices[] = {
+	{
+		I2C_BOARD_INFO("mt9t031", 0x5d),
+	},
+};
+
+static struct soc_camera_link iclink = {
+	.bus_id		= 0,		/* Must match with the camera ID */
+	.power		= pcm037_camera_power,
+	.board_info	= &pcm037_i2c_2_devices[0],
+	.i2c_adapter_id	= 2,
+	.module_name	= "mt9t031",
+};
+
 static struct i2c_board_info pcm037_i2c_devices[] = {
-       {
+	{
 		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
 		.platform_data = &board_eeprom,
 	}, {
@@ -270,7 +343,14 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
 		.type = "pcf8563",
 	}
 };
-#endif
+
+static struct platform_device pcm037_camera = {
+	.name	= "soc-camera-pdrv",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &iclink,
+	},
+};
 
 /* Not connected by default */
 #ifdef PCM970_SDHC_RW_SWITCH
@@ -334,9 +414,41 @@ static struct imxmmc_platform_data sdhc_pdata = {
 	.exit = pcm970_sdhc1_exit,
 };
 
+struct mx3_camera_pdata camera_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
+	.mclk_10khz	= 2000,
+};
+
+static int __init pcm037_camera_alloc_dma(const size_t buf_size)
+{
+	dma_addr_t dma_handle;
+	void *buf;
+	int dma;
+
+	if (buf_size < 2 * 1024 * 1024)
+		return -EINVAL;
+
+	buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
+	if (!buf) {
+		pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
+		return -ENOMEM;
+	}
+
+	memset(buf, 0, buf_size);
+
+	dma = dma_declare_coherent_memory(&mx3_camera.dev,
+					dma_handle, dma_handle, buf_size,
+					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+
+	/* The way we call dma_declare_coherent_memory only a malloc can fail */
+	return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
+}
+
 static struct platform_device *devices[] __initdata = {
 	&pcm037_flash,
 	&pcm037_sram_device,
+	&pcm037_camera,
 };
 
 static struct ipu_platform_data mx3_ipu_data = {
@@ -377,6 +489,22 @@ static const struct fb_videomode fb_modedb[] = {
 		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
 		.vmode		= FB_VMODE_NONINTERLACED,
 		.flag		= 0,
+	}, {
+		/* 240x320 @ 60 Hz */
+		.name		= "CMEL-OLED",
+		.refresh	= 60,
+		.xres		= 240,
+		.yres		= 320,
+		.pixclock	= 185925,
+		.left_margin	= 9,
+		.right_margin	= 16,
+		.upper_margin	= 7,
+		.lower_margin	= 9,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+		.flag		= 0,
 	},
 };
 
@@ -397,6 +525,14 @@ static void __init mxc_board_init(void)
 	mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
 			"pcm037");
 
+	if (pcm037_variant() == PCM037_EET)
+		mxc_iomux_setup_multiple_pins(pcm037_uart1_pins,
+			ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1");
+	else
+		mxc_iomux_setup_multiple_pins(pcm037_uart1_handshake_pins,
+			ARRAY_SIZE(pcm037_uart1_handshake_pins),
+			"pcm037_uart1");
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
@@ -415,18 +551,30 @@ static void __init mxc_board_init(void)
 	}
 
 
-#ifdef CONFIG_I2C_IMX
+	/* I2C adapters and devices */
 	i2c_register_board_info(1, pcm037_i2c_devices,
 			ARRAY_SIZE(pcm037_i2c_devices));
 
 	mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data);
-#endif
+	mxc_register_device(&mxc_i2c_device2, &pcm037_i2c_2_data);
+
 	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
 	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);
 	if (!gpio_usbotg_hs_activate())
 		mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+
+	/* CSI */
+	/* Camera power: default - off */
+	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power");
+	if (!ret)
+		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
+	else
+		iclink.power = NULL;
+
+	if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
+		mxc_register_device(&mx3_camera, &camera_pdata);
 }
 
 static void __init pcm037_timer_init(void)
@@ -448,4 +596,3 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	.init_machine   = mxc_board_init,
 	.timer          = &pcm037_timer,
 MACHINE_END
-

arch/arm/mach-mx3/pcm037.h

@@ -0,0 +1,11 @@
+#ifndef __PCM037_H__
+#define __PCM037_H__
+
+enum pcm037_board_variant {
+	PCM037_PCM970,
+	PCM037_EET,
+};
+
+extern enum pcm037_board_variant pcm037_variant(void);
+
+#endif

arch/arm/mach-mx3/pcm037_eet.c

@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) 2009
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <mach/common.h>
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+#include <mach/spi.h>
+#endif
+#include <mach/iomux-mx3.h>
+
+#include <asm/mach-types.h>
+
+#include "pcm037.h"
+#include "devices.h"
+
+static unsigned int pcm037_eet_pins[] = {
+	/* SPI #1 */
+	MX31_PIN_CSPI1_MISO__MISO,
+	MX31_PIN_CSPI1_MOSI__MOSI,
+	MX31_PIN_CSPI1_SCLK__SCLK,
+	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI1_SS0__SS0,
+	MX31_PIN_CSPI1_SS1__SS1,
+	MX31_PIN_CSPI1_SS2__SS2,
+
+	/* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
+	IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO),
+	/* GPIO keys */
+	IOMUX_MODE(MX31_PIN_GPIO1_0,	IOMUX_CONFIG_GPIO), /* 0 */
+	IOMUX_MODE(MX31_PIN_GPIO1_1,	IOMUX_CONFIG_GPIO), /* 1 */
+	IOMUX_MODE(MX31_PIN_GPIO1_2,	IOMUX_CONFIG_GPIO), /* 2 */
+	IOMUX_MODE(MX31_PIN_GPIO1_3,	IOMUX_CONFIG_GPIO), /* 3 */
+	IOMUX_MODE(MX31_PIN_SVEN0,	IOMUX_CONFIG_GPIO), /* 32 */
+	IOMUX_MODE(MX31_PIN_STX0,	IOMUX_CONFIG_GPIO), /* 33 */
+	IOMUX_MODE(MX31_PIN_SRX0,	IOMUX_CONFIG_GPIO), /* 34 */
+	IOMUX_MODE(MX31_PIN_SIMPD0,	IOMUX_CONFIG_GPIO), /* 35 */
+	IOMUX_MODE(MX31_PIN_RTS1,	IOMUX_CONFIG_GPIO), /* 38 */
+	IOMUX_MODE(MX31_PIN_CTS1,	IOMUX_CONFIG_GPIO), /* 39 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW4,	IOMUX_CONFIG_GPIO), /* 50 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW5,	IOMUX_CONFIG_GPIO), /* 51 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW6,	IOMUX_CONFIG_GPIO), /* 52 */
+	IOMUX_MODE(MX31_PIN_KEY_ROW7,	IOMUX_CONFIG_GPIO), /* 53 */
+
+	/* LEDs */
+	IOMUX_MODE(MX31_PIN_DTR_DTE1,	IOMUX_CONFIG_GPIO), /* 44 */
+	IOMUX_MODE(MX31_PIN_DSR_DTE1,	IOMUX_CONFIG_GPIO), /* 45 */
+	IOMUX_MODE(MX31_PIN_KEY_COL5,	IOMUX_CONFIG_GPIO), /* 55 */
+	IOMUX_MODE(MX31_PIN_KEY_COL6,	IOMUX_CONFIG_GPIO), /* 56 */
+};
+
+/* SPI */
+static struct spi_board_info pcm037_spi_dev[] = {
+	{
+		.modalias	= "dac124s085",
+		.max_speed_hz	= 400000,
+		.bus_num	= 0,
+		.chip_select	= 0,		/* Index in pcm037_spi1_cs[] */
+		.mode		= SPI_CPHA,
+	},
+};
+
+/* Platform Data for MXC CSPI */
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
+
+struct spi_imx_master pcm037_spi1_master = {
+	.chipselect = pcm037_spi1_cs,
+	.num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
+};
+#endif
+
+/* GPIO-keys input device */
+static struct gpio_keys_button pcm037_gpio_keys[] = {
+	{
+		.type	= EV_KEY,
+		.code	= KEY_L,
+		.gpio	= 0,
+		.desc	= "Wheel Manual",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_A,
+		.gpio	= 1,
+		.desc	= "Wheel AF",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_V,
+		.gpio	= 2,
+		.desc	= "Wheel View",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_M,
+		.gpio	= 3,
+		.desc	= "Wheel Menu",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_UP,
+		.gpio	= 32,
+		.desc	= "Nav Pad Up",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_RIGHT,
+		.gpio	= 33,
+		.desc	= "Nav Pad Right",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_DOWN,
+		.gpio	= 34,
+		.desc	= "Nav Pad Down",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_LEFT,
+		.gpio	= 35,
+		.desc	= "Nav Pad Left",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_ENTER,
+		.gpio	= 38,
+		.desc	= "Nav Pad Ok",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= KEY_O,
+		.gpio	= 39,
+		.desc	= "Wheel Off",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_FORWARD,
+		.gpio	= 50,
+		.desc	= "Focus Forward",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_BACK,
+		.gpio	= 51,
+		.desc	= "Focus Backward",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_MIDDLE,
+		.gpio	= 52,
+		.desc	= "Release Half",
+		.wakeup	= 0,
+	}, {
+		.type	= EV_KEY,
+		.code	= BTN_EXTRA,
+		.gpio	= 53,
+		.desc	= "Release Full",
+		.wakeup	= 0,
+	},
+};
+
+static struct gpio_keys_platform_data pcm037_gpio_keys_platform_data = {
+	.buttons	= pcm037_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(pcm037_gpio_keys),
+	.rep		= 0, /* No auto-repeat */
+};
+
+static struct platform_device pcm037_gpio_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &pcm037_gpio_keys_platform_data,
+	},
+};
+
+static int eet_init_devices(void)
+{
+	if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
+		return 0;
+
+	mxc_iomux_setup_multiple_pins(pcm037_eet_pins,
+				ARRAY_SIZE(pcm037_eet_pins), "pcm037_eet");
+
+	/* SPI */
+	spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+	mxc_register_device(&mxc_spi_device0, &pcm037_spi1_master);
+#endif
+
+	platform_device_register(&pcm037_gpio_keys_device);
+
+	return 0;
+}
+
+late_initcall(eet_init_devices);

arch/arm/mach-omap1/board-nokia770.c

@@ -36,7 +36,6 @@
 #include <mach/hwa742.h>
 #include <mach/lcd_mipid.h>
 #include <mach/mmc.h>
-#include <mach/usb.h>
 #include <mach/clock.h>
 
 #define ADS7846_PENDOWN_GPIO	15
@@ -205,9 +204,11 @@ static int nokia770_mmc_get_cover_state(struct device *dev, int slot)
 static struct omap_mmc_platform_data nokia770_mmc2_data = {
 	.nr_slots                       = 1,
 	.dma_mask			= 0xffffffff,
+	.max_freq                       = 12000000,
 	.slots[0]       = {
 		.set_power		= nokia770_mmc_set_power,
 		.get_cover_state	= nokia770_mmc_get_cover_state,
+		.ocr_mask               = MMC_VDD_32_33|MMC_VDD_33_34,
 		.name                   = "mmcblk",
 	},
 };

arch/arm/mach-omap1/mailbox.c

@@ -203,5 +203,5 @@ module_exit(omap1_mbox_exit);
 
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("omap mailbox: omap1 architecture specific functions");
-MODULE_AUTHOR("Hiroshi DOYU" <Hiroshi.DOYU@nokia.com>);
+MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
 MODULE_ALIAS("platform:omap1-mailbox");

arch/arm/mach-omap1/mcbsp.c

@@ -19,7 +19,6 @@
 
 #include <mach/irqs.h>
 #include <mach/dma.h>
-#include <mach/irqs.h>
 #include <mach/mux.h>
 #include <mach/cpu.h>
 #include <mach/mcbsp.h>

arch/arm/mach-omap2/board-omap3evm.c

@@ -25,6 +25,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/i2c/twl4030.h>
+#include <linux/usb/otg.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -307,6 +308,10 @@ static void __init omap3_evm_init(void)
 				ARRAY_SIZE(omap3evm_spi_board_info));
 
 	omap_serial_init();
+#ifdef CONFIG_NOP_USB_XCEIV
+	/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
+	usb_nop_xceiv_register();
+#endif
 	usb_musb_init();
 	ads7846_dev_init();
 }

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -362,6 +362,7 @@ static struct omap_onenand_platform_data board_onenand_data = {
 	.gpio_irq	= 65,
 	.parts		= onenand_partitions,
 	.nr_parts	= ARRAY_SIZE(onenand_partitions),
+	.flags		= ONENAND_SYNC_READWRITE,
 };
 
 static void __init board_onenand_init(void)

arch/arm/mach-omap2/gpmc-onenand.c

@@ -31,6 +31,8 @@ static struct platform_device gpmc_onenand_device = {
 static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
 {
 	struct gpmc_timings t;
+	u32 reg;
+	int err;
 
 	const int t_cer = 15;
 	const int t_avdp = 12;
@@ -43,6 +45,11 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
 	const int t_wpl = 40;
 	const int t_wph = 30;
 
+	/* Ensure sync read and sync write are disabled */
+	reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+	reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
+	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+
 	memset(&t, 0, sizeof(t));
 	t.sync_clk = 0;
 	t.cs_on = 0;
@@ -74,7 +81,16 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
 			  GPMC_CONFIG1_DEVICESIZE_16 |
 			  GPMC_CONFIG1_MUXADDDATA);
 
-	return gpmc_cs_set_timings(cs, &t);
+	err = gpmc_cs_set_timings(cs, &t);
+	if (err)
+		return err;
+
+	/* Ensure sync read and sync write are disabled */
+	reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+	reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
+	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+
+	return 0;
 }
 
 static void set_onenand_cfg(void __iomem *onenand_base, int latency,
@@ -124,7 +140,8 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 	} else if (cfg->flags & ONENAND_SYNC_READWRITE) {
 		sync_read = 1;
 		sync_write = 1;
-	}
+	} else
+		return omap2_onenand_set_async_mode(cs, onenand_base);
 
 	if (!freq) {
 		/* Very first call freq is not known */

arch/arm/mach-omap2/id.c

@@ -48,6 +48,28 @@ int omap_chip_is(struct omap_chip_id oci)
 }
 EXPORT_SYMBOL(omap_chip_is);
 
+int omap_type(void)
+{
+	u32 val = 0;
+
+	if (cpu_is_omap24xx())
+		val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
+	else if (cpu_is_omap34xx())
+		val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
+	else {
+		pr_err("Cannot detect omap type!\n");
+		goto out;
+	}
+
+	val &= OMAP2_DEVICETYPE_MASK;
+	val >>= 8;
+
+out:
+	return val;
+}
+EXPORT_SYMBOL(omap_type);
+
+
 /*----------------------------------------------------------------------------*/
 
 #define OMAP_TAP_IDCODE		0x0204

arch/arm/mach-omap2/mailbox.c

@@ -282,12 +282,12 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	/* DSP or IVA2 IRQ */
-	mbox_dsp_info.irq = platform_get_irq(pdev, 0);
-	if (mbox_dsp_info.irq < 0) {
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0) {
 		dev_err(&pdev->dev, "invalid irq resource\n");
-		ret = -ENODEV;
 		goto err_dsp;
 	}
+	mbox_dsp_info.irq = ret;
 
 	ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info);
 	if (ret)