[Blackfin] arch: Add Support for ISP1362

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

arch/blackfin/mach-bf561/boards/ezkit.c

@@ -92,6 +92,47 @@ void __exit bfin_isp1761_exit(void)
 arch_initcall(bfin_isp1761_init);
 #endif
 
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb/isp1362.h>
+
+static struct resource isp1362_hcd_resources[] = {
+	{
+		.start = 0x2c060000,
+		.end = 0x2c060000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x2c060004,
+		.end = 0x2c060004,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF8,
+		.end = IRQ_PF8,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+	.sel15Kres = 1,
+	.clknotstop = 0,
+	.oc_enable = 0,
+	.int_act_high = 0,
+	.int_edge_triggered = 0,
+	.remote_wakeup_connected = 0,
+	.no_power_switching = 1,
+	.power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+	.name = "isp1362-hcd",
+	.id = 0,
+	.dev = {
+		.platform_data = &isp1362_priv,
+	},
+	.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+	.resource = isp1362_hcd_resources,
+};
+#endif
+
 /*
  *  USB-LAN EzExtender board
  *  Driver needs to know address, irq and flag pin.
@@ -359,6 +400,11 @@ static struct platform_device *ezkit_devices[] __initdata = {
 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 	&i2c_gpio_device,
 #endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+	&isp1362_hcd_device,
+#endif
+
 	&ezkit_flash_device,
 };