Browse Source

mac80211: provide ieee80211_sta_eosp()

The irqsafe version ieee80211_sta_eosp_irqsafe() exists, but
drivers must not mix calls to any irqsafe/non-irqsafe function.
Both ath9k and iwlwifi, the likely first users of this interface,
use non-irqsafe RX/TX/TX status so must also use a non-irqsafe
version of this function. Since no driver uses the _irqsafe()
version, remove that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg 12 years ago
parent
commit
e943789edb
5 changed files with 18 additions and 48 deletions
  1. 1 1
      Documentation/DocBook/80211.tmpl
  2. 14 11
      include/net/mac80211.h
  3. 0 5
      net/mac80211/ieee80211_i.h
  4. 0 14
      net/mac80211/main.c
  5. 3 17
      net/mac80211/sta_info.c

+ 1 - 1
Documentation/DocBook/80211.tmpl

@@ -437,7 +437,7 @@
       </section>
 !Finclude/net/mac80211.h ieee80211_get_buffered_bc
 !Finclude/net/mac80211.h ieee80211_beacon_get
-!Finclude/net/mac80211.h ieee80211_sta_eosp_irqsafe
+!Finclude/net/mac80211.h ieee80211_sta_eosp
 !Finclude/net/mac80211.h ieee80211_frame_release_type
 !Finclude/net/mac80211.h ieee80211_sta_ps_transition
 !Finclude/net/mac80211.h ieee80211_sta_ps_transition_ni

+ 14 - 11
include/net/mac80211.h

@@ -1946,14 +1946,14 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);
  * filter those response frames except in the case of frames that
  * are buffered in the driver -- those must remain buffered to avoid
  * reordering. Because it is possible that no frames are released
- * in this case, the driver must call ieee80211_sta_eosp_irqsafe()
+ * in this case, the driver must call ieee80211_sta_eosp()
  * to indicate to mac80211 that the service period ended anyway.
  *
  * Finally, if frames from multiple TIDs are released from mac80211
  * but the driver might reorder them, it must clear & set the flags
  * appropriately (only the last frame may have %IEEE80211_TX_STATUS_EOSP)
  * and also take care of the EOSP and MORE_DATA bits in the frame.
- * The driver may also use ieee80211_sta_eosp_irqsafe() in this case.
+ * The driver may also use ieee80211_sta_eosp() in this case.
  */
 
 /**
@@ -2506,7 +2506,7 @@ enum ieee80211_roc_type {
  *	setting the EOSP flag in the QoS header of the frames. Also, when the
  *	service period ends, the driver must set %IEEE80211_TX_STATUS_EOSP
  *	on the last frame in the SP. Alternatively, it may call the function
- *	ieee80211_sta_eosp_irqsafe() to inform mac80211 of the end of the SP.
+ *	ieee80211_sta_eosp() to inform mac80211 of the end of the SP.
  *	This callback must be atomic.
  * @allow_buffered_frames: Prepare device to allow the given number of frames
  *	to go out to the given station. The frames will be sent by mac80211
@@ -2517,7 +2517,7 @@ enum ieee80211_roc_type {
  *	them between the TIDs, it must set the %IEEE80211_TX_STATUS_EOSP flag
  *	on the last frame and clear it on all others and also handle the EOSP
  *	bit in the QoS header correctly. Alternatively, it can also call the
- *	ieee80211_sta_eosp_irqsafe() function.
+ *	ieee80211_sta_eosp() function.
  *	The @tids parameter is a bitmap and tells the driver which TIDs the
  *	frames will be on; it will at most have two bits set.
  *	This callback must be atomic.
@@ -3857,14 +3857,17 @@ void ieee80211_sta_block_awake(struct ieee80211_hw *hw,
  * %IEEE80211_TX_STATUS_EOSP bit and call this function instead.
  * This applies for PS-Poll as well as uAPSD.
  *
- * Note that there is no non-_irqsafe version right now as
- * it wasn't needed, but just like _tx_status() and _rx()
- * must not be mixed in irqsafe/non-irqsafe versions, this
- * function must not be mixed with those either. Use the
- * all irqsafe, or all non-irqsafe, don't mix! If you need
- * the non-irqsafe version of this, you need to add it.
+ * Note that just like with _tx_status() and _rx() drivers must
+ * not mix calls to irqsafe/non-irqsafe versions, this function
+ * must not be mixed with those either. Use the all irqsafe, or
+ * all non-irqsafe, don't mix!
+ *
+ * NB: the _irqsafe version of this function doesn't exist, no
+ *     driver needs it right now. Don't call this function if
+ *     you'd need the _irqsafe version, look at the git history
+ *     and restore the _irqsafe version!
  */
-void ieee80211_sta_eosp_irqsafe(struct ieee80211_sta *pubsta);
+void ieee80211_sta_eosp(struct ieee80211_sta *pubsta);
 
 /**
  * ieee80211_iter_keys - iterate keys programmed into the device

+ 0 - 5
net/mac80211/ieee80211_i.h

@@ -800,11 +800,6 @@ enum sdata_queue_type {
 enum {
 	IEEE80211_RX_MSG	= 1,
 	IEEE80211_TX_STATUS_MSG	= 2,
-	IEEE80211_EOSP_MSG	= 3,
-};
-
-struct skb_eosp_msg_data {
-	u8 sta[ETH_ALEN], iface[ETH_ALEN];
 };
 
 enum queue_stop_reason {

+ 0 - 14
net/mac80211/main.c

@@ -226,8 +226,6 @@ u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata)
 static void ieee80211_tasklet_handler(unsigned long data)
 {
 	struct ieee80211_local *local = (struct ieee80211_local *) data;
-	struct sta_info *sta, *tmp;
-	struct skb_eosp_msg_data *eosp_data;
 	struct sk_buff *skb;
 
 	while ((skb = skb_dequeue(&local->skb_queue)) ||
@@ -243,18 +241,6 @@ static void ieee80211_tasklet_handler(unsigned long data)
 			skb->pkt_type = 0;
 			ieee80211_tx_status(&local->hw, skb);
 			break;
-		case IEEE80211_EOSP_MSG:
-			eosp_data = (void *)skb->cb;
-			for_each_sta_info(local, eosp_data->sta, sta, tmp) {
-				/* skip wrong virtual interface */
-				if (memcmp(eosp_data->iface,
-					   sta->sdata->vif.addr, ETH_ALEN))
-					continue;
-				clear_sta_flag(sta, WLAN_STA_SP);
-				break;
-			}
-			dev_kfree_skb(skb);
-			break;
 		default:
 			WARN(1, "mac80211: Packet is of unknown type %d\n",
 			     skb->pkt_type);

+ 3 - 17
net/mac80211/sta_info.c

@@ -1390,30 +1390,16 @@ void ieee80211_sta_block_awake(struct ieee80211_hw *hw,
 }
 EXPORT_SYMBOL(ieee80211_sta_block_awake);
 
-void ieee80211_sta_eosp_irqsafe(struct ieee80211_sta *pubsta)
+void ieee80211_sta_eosp(struct ieee80211_sta *pubsta)
 {
 	struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
 	struct ieee80211_local *local = sta->local;
-	struct sk_buff *skb;
-	struct skb_eosp_msg_data *data;
 
 	trace_api_eosp(local, pubsta);
 
-	skb = alloc_skb(0, GFP_ATOMIC);
-	if (!skb) {
-		/* too bad ... but race is better than loss */
-		clear_sta_flag(sta, WLAN_STA_SP);
-		return;
-	}
-
-	data = (void *)skb->cb;
-	memcpy(data->sta, pubsta->addr, ETH_ALEN);
-	memcpy(data->iface, sta->sdata->vif.addr, ETH_ALEN);
-	skb->pkt_type = IEEE80211_EOSP_MSG;
-	skb_queue_tail(&local->skb_queue, skb);
-	tasklet_schedule(&local->tasklet);
+	clear_sta_flag(sta, WLAN_STA_SP);
 }
-EXPORT_SYMBOL(ieee80211_sta_eosp_irqsafe);
+EXPORT_SYMBOL(ieee80211_sta_eosp);
 
 void ieee80211_sta_set_buffered(struct ieee80211_sta *pubsta,
 				u8 tid, bool buffered)