소스 검색

Fix spelling mistakes in comments

 milisecond -> millisecond
 meassge -> message

Cc: Kalle Valo <kvalo@adurom.com>
Cc: Jiri Kosina <trivial@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Stefan Weil 14 년 전
부모
커밋
e8a8b252fb

+ 2 - 2
arch/arm/mach-bcmring/include/csp/tmrHw.h

@@ -76,7 +76,7 @@ tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id
 *           certain time interval
 *
 *  This function initializes a periodic timer to generate timer interrupt
-*  after every time interval in milisecond
+*  after every time interval in millisecond
 *
 *  @return   On success: Effective interval set in mili-second
 *            On failure: 0
@@ -93,7 +93,7 @@ tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] T
 *           after certain time interval
 *
 *  This function initializes a periodic timer to generate a single ticks after
-*  certain time interval in milisecond
+*  certain time interval in millisecond
 *
 *  @return   On success: Effective interval set in mili-second
 *            On failure: 0

+ 1 - 1
drivers/acpi/apei/einj.c

@@ -39,7 +39,7 @@
 #define EINJ_PFX "EINJ: "
 
 #define SPIN_UNIT		100			/* 100ns */
-/* Firmware should respond within 1 miliseconds */
+/* Firmware should respond within 1 milliseconds */
 #define FIRMWARE_TIMEOUT	(1 * NSEC_PER_MSEC)
 
 /*

+ 1 - 1
drivers/acpi/apei/erst.c

@@ -53,7 +53,7 @@
 				     sizeof(struct acpi_table_erst)))
 
 #define SPIN_UNIT		100			/* 100ns */
-/* Firmware should respond within 1 miliseconds */
+/* Firmware should respond within 1 milliseconds */
 #define FIRMWARE_TIMEOUT	(1 * NSEC_PER_MSEC)
 #define FIRMWARE_MAX_STALL	50			/* 50us */
 

+ 2 - 2
drivers/gpu/drm/nouveau/nouveau_bios.c

@@ -1927,7 +1927,7 @@ init_ltime(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 	 * offset      (8  bit): opcode
 	 * offset + 1  (16 bit): time
 	 *
-	 * Sleep for "time" miliseconds.
+	 * Sleep for "time" milliseconds.
 	 */
 
 	unsigned time = ROM16(bios->data[offset + 1]);
@@ -1935,7 +1935,7 @@ init_ltime(struct nvbios *bios, uint16_t offset, struct init_exec *iexec)
 	if (!iexec->execute)
 		return 3;
 
-	BIOSLOG(bios, "0x%04X: Sleeping for 0x%04X miliseconds\n",
+	BIOSLOG(bios, "0x%04X: Sleeping for 0x%04X milliseconds\n",
 		offset, time);
 
 	msleep(time);

+ 2 - 2
drivers/net/wireless/wl1251/acx.h

@@ -1272,10 +1272,10 @@ struct wl1251_acx_tid_cfg {
 /* OBSOLETE */
 #define WL1251_ACX_INTR_WAKE_ON_HOST	BIT(6)
 
-/* Trace meassge on MBOX #A */
+/* Trace message on MBOX #A */
 #define WL1251_ACX_INTR_TRACE_A		BIT(7)
 
-/* Trace meassge on MBOX #B */
+/* Trace message on MBOX #B */
 #define WL1251_ACX_INTR_TRACE_B		BIT(8)
 
 /* Command processing completion */

+ 1 - 1
drivers/net/wireless/wl1251/wl1251.h

@@ -418,7 +418,7 @@ void wl1251_disable_interrupts(struct wl1251 *wl);
 #define WL1251_FW_NAME "wl1251-fw.bin"
 #define WL1251_NVS_NAME "wl1251-nvs.bin"
 
-#define WL1251_POWER_ON_SLEEP 10 /* in miliseconds */
+#define WL1251_POWER_ON_SLEEP 10 /* in milliseconds */
 
 #define WL1251_PART_DOWN_MEM_START	0x0
 #define WL1251_PART_DOWN_MEM_SIZE	0x16800

+ 2 - 2
drivers/net/wireless/wl12xx/wl1271.h

@@ -506,7 +506,7 @@ int wl1271_plt_stop(struct wl1271 *wl);
 
 /* WL1271 needs a 200ms sleep after power on, and a 20ms sleep before power
    on in case is has been shut down shortly before */
-#define WL1271_PRE_POWER_ON_SLEEP 20 /* in miliseconds */
-#define WL1271_POWER_ON_SLEEP 200 /* in miliseconds */
+#define WL1271_PRE_POWER_ON_SLEEP 20 /* in milliseconds */
+#define WL1271_POWER_ON_SLEEP 200 /* in milliseconds */
 
 #endif

+ 2 - 2
drivers/net/wireless/wl12xx/wl1271_acx.h

@@ -47,9 +47,9 @@
 #define WL1271_ACX_INTR_HW_AVAILABLE       BIT(5)
 /* The MISC bit is used for aggregation of RX, TxComplete and TX rate update */
 #define WL1271_ACX_INTR_DATA               BIT(6)
-/* Trace meassge on MBOX #A */
+/* Trace message on MBOX #A */
 #define WL1271_ACX_INTR_TRACE_A            BIT(7)
-/* Trace meassge on MBOX #B */
+/* Trace message on MBOX #B */
 #define WL1271_ACX_INTR_TRACE_B            BIT(8)
 
 #define WL1271_ACX_INTR_ALL		   0xFFFFFFFF